Documente Academic
Documente Profesional
Documente Cultură
QualiPoc Freerider
Manual 10.6.0
March 2011
SwissQual License AG
Allmendweg 8 CH-4528 Zuchwil Switzerland
t +41 32 686 65 65 f +41 32 686 65 66 e info@swissqual.com
www.swissqual.com
SwissQual has made every effort to ensure that eventual instructions contained in the document are adequate and free
of errors and omissions. SwissQual will, if necessary, explain issues which may not be covered by the documents.
SwissQuals liability for any errors in the documents is limited to the correction of errors and the aforementioned advisory
services.
Copyright 2000 - 2011 SwissQual AG. All rights reserved.
No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated
into any human or computer language without the prior written permission of SwissQual AG.
Confidential materials.
All information in this document is regarded as commercial valuable, protected and privileged intellectual property, and is
provided under the terms of existing Non-Disclosure Agreements or as commercial-in-confidence material.
When you refer to a SwissQual technology or product, you must acknowledge the respective text or logo trademark
somewhere in your text.
SwissQual, Seven.Five, SQuad, QualiPoc, NetQual, VQuad as well as the following logos are registered
trademarks of SwissQual AG.
Diversity, NQDI, VMon, NiNA, NiNA+, NQView, NQComm, NQTM, QualiWatch-M, QualiWatch-S,
NQAgent, NQWeb, QPControl, SystemInspector, Diversity Unattended, Diversity Explorer, Diversity
Ranger, QualiPoc Static, QualiPoc Mobile, VQuad-HD, QualiPoc iQ are trademarks of SwissQual AG.
SwissQual acknowledges the following trademarks for company names and products:
Adobe, Adobe Acrobat, and Adobe Postscript are trademarks of Adobe Systems Incorporated.
Apple is a trademark of Apple Computer, Inc.
DIMENSION, LATITUDE, and OPTIPLEX are registered trademarks of Dell Inc.
ELEKTROBIT is a registered trademark of Elektrobit Group Plc.
Google is a registered trademark of Google Inc.
Intel, Intel Itanium, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation.
INTERNET EXPLORER, SMARTPHONE, TABLET are registered trademarks of Microsoft Corporation.
Java is a U.S. trademark of Sun Microsystems, Inc.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Microsoft Windows, Microsoft Windows NT, and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries U.S.
NOKIA is a registered trademark of Nokia Corporation.
Oracle is a registered US trademark of Oracle Corporation, Redwood City, California.
SAMSUNG is a registered trademark of Samsung Corporation.
SIERRA WIRELESS is a registered trademark of Sierra Wireless, Inc.
TRIMBLE is a registered trademark of Trimble Navigation Limited.
U-BLOX is a registered trademark of u-blox Holding AG.
UNIX is a registered trademark of The Open Group.
Contents
QualiPoc Freerider............................................................................................................................................0
1
Preface ..................................................................................................................................................1
Scope.....................................................................................................................................................1
Related Documents ...............................................................................................................................1
Appendix ............................................................................................................................................18
Troubleshooting ...................................................................................................................................18
FTP Connection Problems ............................................................................................................. 18
Known Limitations................................................................................................................................18
Contents |
CONFIDENTIAL MATERIALS
iii
|
CONFIDENTIAL MATERIALS
Preface
The QualiPoc Freerider Manual 10.6.0 describes how to configure and operate the QualiPoc Freerider.
Scope
QualiPoc Freerider is as benchmarking solution based on the QualiPoc suite.
Related Documents
[1] Manual - NetQual - TestManager.pdf
[2] Manual - NetQual - NQView.pdf
[3] Manual - NetQual - NQComm.pdf
[4] Manual QualiPoc SW QPView.pdf
Chapter 1 | Preface
CONFIDENTIAL MATERIALS
System Overview
QualiPoc Freerider is a QualiPoc based system where the mobile phones are connected and controlled by a
Laptop or TabletPC through to the use of a Wireless LAN Ad Hoc network. The maximum number of devices
that can be used for measurement is 6.
In order to establish the communication between the system components, control and configure the system,
run and monitor the measurement, the following application components are needed:
1. On the Laptop:
Test Manager: configures the system, the task and Campaign to be run by the various mobile
phones
NQComm: ensures the communication between the Laptop and all the probes via FTP server
(also installed on the Laptop)
NQView: provides the real monitoring based on the information logged by all the single devices
2. On the QualiPoc
Qualipak
LAPTOP
TM
NQComm
FTP Server
NTP Server
WLAN Ad Hoc
TM
NQView
DB
QP
GPS
This chapter describes how to configure the QualiPoc Freerider after the installation. For a description on
how to install QualiPoc Freerider software, see the Installation QualiPoc Freerider.pdf document.
Configuration of NQComm
1. Log on to the computer.
2. On the Start menu, click All Programs, click SwissQual, click Diversity, and then click NQComm.
3. In the NetQual Settings window, click the General tab and check the following checkboxes:
a
Chapter 1 |
CONFIDENTIAL MATERIALS
5. On the Servers tab use the defined server from the installation.
6. On the SMS Notification tab disable the checkbox Allow SMS Notification.
4. Press the icon Add unit and define on the General tab Unit name, Computer name, Unit type, Group.
6. On the QualiPoc tab define QualiPoc unit profile and SMS profile. It is coactive to select the No SMS
profile.
10. Click the icon Add a QualiPoc device. On the General tab define the Device name and
Manufacturer/Model.
12. On the QualiPoc settings tab define the access points and select the internal GPS type.
13. Press the Add button to add the QualiPoc device to the unit.
14. On the unit press the Update button to send the settings to the device.
10
11
5. Click on the Test manager tree and enter the database connection.
10. If all units are defined check the option Automaticaly (re)connect to Diveristy units.
12
Configuration of QPControl
1. After starting up QPControl select Options > Settings > Unit > Phone define the Unit Name and
Computer Name.
13
nd
6. Now poll the FTP server to receive and send messages to NQComm.
14
Starting a Task
7. Define some tasks. For a complete description on how to configure tasks and jobs please see document
[1].
8. Make sure that NQComm is running.
9. Start a task with TestManager.
15
Monitor a Task
There are two ways to monitor a running task. On the phone you can monitor the task with QPView. With
NQView you can remotely monitor the task on a laptop or tablet pc.
NQView
10. Start up NQView and load the desired workspace. Press the Connect Diversity Unit button and close
the NQView connections window again with the Close button.
11. Now the Freerider QualiPoc units with a running task will now connect to NQView.
For more information on how to use NQView, see the document [2].
QPView
If QPView is installed you can monitor the actual measurement on the phone with QPView, for a description
see the document [4].
16
Stopping a Task
A running task can be stopped with the TestManager by pressing the Stop task icon.
Important: Stopping a task with TestManager is just possible if the unit is connected to NQView because
NQView sends the stop command. If the unit is not connected the task needs to be stopped manually on
the device.
17
Appendix
Troubleshooting
This chapter describes how to troubleshoot problems that you might encounter when you use QualiPoc
Freerider.
Check if the Ad-hoc network is connected on the laptop. Disconnect it and connect again.
Check the channel number of the WLAN on the QualiPoc is the same as the one defined in the APN
in TM.
Check the FTP server settings. (Is the FTP server running and has all the needed user rights on the
FTPShare folder)
Known Limitations
Stopping a running task is just possible if the QualiPoc unit is connected to NQView.
18
Chapter A | Appendix
CONFIDENTIAL MATERIALS