Documente Academic
Documente Profesional
Documente Cultură
1. Class:
3. Lesson No.: 1
4. Main Topic: Current Mirrors using BJT and MOSFET
5. Sub- topics (Key words): Block dia,circuit Dia and working
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) :Principle of
Current mirror circuits operation(in detail)
8. Anticipated Students queries (FAQ) :1) Applications of current mirror?
2)Why the name so given?
3)Use of current mirror in Integrated circuits?
9. Live examples to be given/ Applications of the Concepts : Used in highly
integrated circuits, where reciprocating the current is necessary throughout the chip
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
1. Class:
3. Lesson No.: 2
4. Main Topic: Current Mirror
5. Sub- topics (Key words): Simple & , Base current compensated current mirror
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs and MOS)
7. Objective (the students will learn about the following through this
lecture) :Principle of
Current mirror circuits operation(in detail)
8. Anticipated Students queries (FAQ) :1) Applications of current mirror?
2)Why the name so given?
3)Use of current mirror in Integrated circuits?
9. Live examples to be given/ Applications of the Concepts : Used in highly
integrated circuits, where reciprocating the current is necessary throughout the chip
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
S.No.
Page No.
LECTURE PLAN(lec 3)
1. Class:
3. Lesson No.: 3
4. Main Topic: Wilson and Improved Wilson Current Mirrors, Widlar Current source
5. Sub- topics (Key words): Current Source
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) :Cascode structures for BJTs and MOS
8. Anticipated Students queries (FAQ) :1) Difference between cascade and
cascode structures
2) Importance of cascade structures
9. Live examples to be given/ Applications of the Concepts : Integrated
Circuits
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
S.No.
Page No.
LECTURE PLAN
1. Class:
3. Lesson No.: 4
4. Main Topic: Cascode current Mirror
5. Sub- topics (Key words): Block dia,circuit Dia and working
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) :Principle of
Current mirror circuits operation(in detail)
8. Anticipated Students queries (FAQ) :1) 1) Difference between cascade and
cascode structures
2) Importance of cascade structures
9. Live examples to be given/ Applications of the Concepts : Used in highly
integrated circuits, where reciprocating the current is necessary throughout the chip
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
Reference Book : 1. B.P. singh and Rekha Singh, Electronic Devices an Integrated
Circuits; Pearson Education, 1stEdition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 5
4. Main Topic: IC 741
5. Sub- topics (Key words): : Bias circuit, short circuit protection circuitry,input
circuitry
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) :Connections for : Bias circuit, short circuit protection circuitry,input
circuitry
8. Anticipated Students queries (FAQ) :1) What is biasing?
2)Need for short circuit protection circuitry ?
9. Live examples to be given/ Applications of the Concepts : IC 741 is used
in electronics system design and various other feilds
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 6
4. Main Topic: 2nd stage, output stage, and device parameters
5. Sub- topics (Key words): Circuit Diagram and biasing
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) : Connections for 2nd stage, output stage, and device parameters
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
1. Class:
3. Lesson No.: 7
4. Main Topic: Intro to DC Analysis of 741
5. Sub- topics (Key words): Block dia,circuit Dia and working
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) DC current introduction of each stage
8. Anticipated Students queries (FAQ) :1) What is DC analysis?
2)Why it is important?
9. Live examples to be given/ Applications of the Concepts : IC 741 is used
in electronics system design and various other feilds
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
S.No.
Page No.
1. Class:
3. Lesson No.: 8
4. Main Topic: Small Signal Analysis of input stage, second stage
5. Sub- topics (Key words): to calculate Rid, R01, Equivalent Circuit
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs and MOS)
7. Objective (the students will learn about the following through this
lecture) : to calculate Rid, R01, Equivalent Circuit
8. Anticipated Students queries (FAQ) :1)Difference between DC analysis and
small signal analysis?
2)Why it is called small signal analysis?
3)What is the use of small signal analysis?
9. Live examples to be given/ Applications of the Concepts : IC 741 is used
in electronics system design and various other feilds
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 9
4. Main Topic: Small signal analysis of Output stage
5. Sub- topics (Key words): Equivalent circuit.
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) : Small signal analysis of Output stage
8. Anticipated Students queries (FAQ) :
and small signal analysis?
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 10
4. Main Topic: Frequency Response of 741
5. Sub- topics (Key words): Frequency response of compensated, non
compensated Op-Amps, closed loop frequency response
6. Pre-requisites: TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) : Simplified model of 741 IC
8. Anticipated Students queries (FAQ) :1) Why to study frequency response
circuits
LECTURE PLAN
1. Class:
3. Lesson No.: 11
4. Main Topic: Slew Rate
5. Sub- topics (Key words): : Settling time, rise time full power bandwidth
6. Pre-requisites : Op-amp characteristics
7. Objective (the students will learn about the following through this
lecture) : Importance of Op- amp characteristics while designing an IC(using it).
8. Anticipated Students queries (FAQ) :1) What is CMRR?
2)How is efficiency of an Op-amp related to its Slew rate?
9. Live examples to be given/ Applications of the Concepts : IC 741 is used
in electronics system design and various other feilds
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 12
4. Main Topic: Relationship Between ft and SR
5. Sub- topics (Key words): Derivation
6. Pre-requisites : TRANSISTOR CONFIGURATIONS (BJTs)
7. Objective (the students will learn about the following through this
lecture) : Relationship Between ft and SR
8. Anticipated Students queries (FAQ) :
9. Live examples to be given/ Applications of the Concepts : It is a numerical
based derivation and
formula thus derived is used in many numerical related to
IC 741
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
1. Class:
3. Lesson No.: 13
4. Main Topic: Overview of Op-Amp
5. Sub- topics (Key words): VCVS, VCCS
6. Pre-requisites :Op-Amp parameters
7. Objective (the students will learn about the following through this
lecture) :Configurations of Op-Amp in detail(construction, working
operation,advantages)
8. Anticipated Students queries (FAQ) :1) What are linear devices?
LECTURE PLAN
1. Class:
3. Lesson No.: 14
4. Main Topic: V-I and I-V converters
5. Sub- topics (Key words): VCCS with floating loads, grounded load, sensitivity
applications
7. Objective (the students will learn about the following through this
lecture) :Voltage and current sources using convertor circuits which employ OpAmp as their basic block
8. Anticipated Students queries (FAQ) :1) Applications of these covertors
9. Live examples to be given/ Applications of the Concepts : Used in highly
integrated circuits, where current nad voltages are employed
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN(lec 3)
1. Class:
3. Lesson No.: 15
4. Main Topic: Instrumentation Amplifier
5. Sub- topics (Key words): Construction and working
LECTURE PLAN
1. Class:
3. Lesson No.: 16
4. Main Topic: Generalized Impedance converter
5. Sub- topics (Key words): Inductive Impedence, FDNR
6. Pre-requisites : Op amp parameters
7. Objective (the students will learn about the following through this
lecture) : 1)To simulate Inductive Impedance.
2)To simulate FDNR
References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
Reference Book : 1. B.P. singh and Rekha Singh, Electronic Devices an Integrated
Circuits; Pearson Education, 1stEdition 2006
LECTURE PLAN
1. Class:
LECTURE PLAN
1. Class:
3. Lesson No.: 17
4. Main Topic: : First and second order -LP
5. Sub- topics (Key words): Definations, 3 dB frequency, frequency response of LPF, HPF,
BPF, Q Factor
6. Pre-requisites : Filter Function in Integrated Circuits
7. Objective (the students will learn about the following through this
lecture) : Various parameters (in general) related to filters and Low pass filter
characteristics and operation
8. Anticipated Students queries (FAQ) : 1.What is the significance of 3dB
frequency?
2) Importance of transfer function?
9. Live examples to be given/ Applications of the Concepts : Filter based
numerical
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
1. Class:
3. Lesson No.: 19
4. Main Topic KHN, Tow-Thomas
5. Sub- topics (Key words): Block dia,circuit Dia and working
6. Pre-requisites : Filter Function in Integrated Circuits
7. Objective (the students will learn about the following through this
lecture) Various parameters (in general) related to filters and KHN , TOW-THOMAS
filter characteristics and operation
8. Anticipated Students queries (FAQ) :1)What are state variable filters?
9. Live examples to be given/ Applications of the Concepts : Filter based
numerical.
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
1. Class:
3. Lesson No.: 20
4. Main Topic State Variable Biquad filters
5. Sub- topics (Key words): Design Procedure, Expression for filter gain
6. Pre-requisites : : Filter Function in Integrated Circuits
7. Objective (the students will learn about the following through this
lecture) : Design Procedure, Expression for filter gain
8. Anticipated Students queries (FAQ) :
9. Live examples to be given/ Applications of the Concepts : : Filter based
numerical.
10. References :
Text Book:
1. Sedra and Smith, Microelectronic Circuits, Oxford University press, 5th Edition,
2005.
2. J. Michael Jacob, Applications and design with Analog Integrated Circuits, PHI,
2nd Edition,
2004.
Reference Book :
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006
LECTURE PLAN
1. Class:
3. Lesson No.: 21
4. Main Topic: Sinusoidal oscillators
5. Sub- topics (Key words): Barkhausen criteria, classification of oscillators, RC phase shift,
Wien Bridge.
6. Pre-requisites :Op amp as amplifier.
7. Objective (the students will learn about the following through this
lecture) : Need to use Op amp as amplifier and oscillator
8. Anticipated Students queries (FAQ) :
performance?
1. B.P. singh and Rekha Singh, Electronic Devices an Integrated Circuits; Pearson
Education, 1st
Edition 2006