REPORT ON TORSION IN STRUCTURAL CONCRETE (ACI 445.1R-12)
lAcadmie des Sciences, de linstitut Imperial de France et
imprime par son ordre, V. 14, Imprimerie Impriale, Paris, pp.233-560. Stevens, N. J.; Uzumeri, S. M.; and Collins, M. P., 1991, Reinforced Concrete Subjected to Reversed Cyclic Shear Experiments and Constitutive Model, ACI Structural Journal, V. 88, No. 2, Mar.-Apr., pp. 135-146. Teutsch, M., 1980, Trag- und Verformungsverhalten von Stahlbeton- und Spannbetonbalken mit rechteckigem Querschnitt unter kombinierter Beanspruchung aus Biegung, Querkraft und Torsion, dissertation, TU Carolo Wilhelmina Braunschweig, Fakultt fr Bauwesen, 181 pp. Thrlimann, B., 1978, Plastic Analysis of Reinforced Concrete Beams, Introductory Report, IABSE Colloquium, Reports of the Working Commissions, International Association for Bridges and Structural Engineering (IABSE), Zrich, Switzerland, V. 28, Oct., pp. 71-90. Thrlimann, B.; Marti, P.; Pralong, J.; Ritz, P.; and Zimmerli, B., 1983, Anwendung der Plastizitatstheorie auf Stahlbeton (Plasticity in Concrete Structures), Vorlesung, ETH-Zurich. Vecchio, F. J., 1999, Towards Cyclic Load Modeling of Reinforced Concrete, ACI Structural Journal, V. 96, No. 2, Mar.-Apr., pp. 193-201. Vecchio, F. J., and Collins, M. P., 1981, Stress-Strain Characteristic of Reinforced Concrete in Pure Shear, IABSE Colloquium, Advanced Mechanics of Reinforced Concrete, Delft, Final Report, International Association of Bridge and Structural Engineering, Zurich, Switzerland, pp. 221-225. Vecchio, F. J., and Collins, M. P., 1982, The Response of Reinforced Concrete to In-Plane Shear and Normal Stresses, Publication No. 82-03, Department of Civil Engineering, University of Toronto, Toronto, ON, Canada, pp. 332. Vecchio, F. J., and Collins, M. P., 1986, The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear, ACI Journal, V. 83, No. 2, Mar.-Apr., pp. 219-231. Vecchio, F. J., and Collins, M. P., 1993, Compression Response of Cracked Reinforced Concrete, Journal of Structural Engineering, V. 119, No. 12, pp. 3590-3610. Victor, D. J., and Ferguson, P. M., 1968, Reinforced Concrete T-Beams without Stirrups under Combined Moment and Torsion, ACI Journal, V. 65, No. 1, Jan., pp. 29-36. Vlasov, V. Z., 1961, Thin Walled Elastic Beams; second revised and augmented edition (1985) (in Russian); English translation, National Technical Information Service, Springfield, VA, 493 pp. Wafa, F. F.; Shihata, S. A.; Akhtaruzzaman, A. A.; and Ashour, S. A., 1995, Prestressed High-Strength Concrete Beams under Torsion, Journal of Structural Engineering, V. 121, No. 9, pp. 1280-1286. Wagner, H., 1929, Ebene Blechwandtrger mit sehr dnnem Stegblech, Zeitschrift fr Flugtechnik und Motorluftschiffahrt, V. 20, No. 8 to 12, Berlin, Germany. Walsh, P. F.; Collins, M. P.; and Archer, F. E., 1967, The Flexure-Torsion and Shear-Torsion Interaction Behaviour of Reinforced Concrete Beams, Civil Engineering Transac-
tions, The Institution of Engineers, Australia, V. CE9, No.
2, pp. 313-320. Walsh, P. F.; Collins, M. P.; Archer, F. E.; and Hall, A. S., 1966, The Ultimate Strength Design of Rectangular Reinforced Concrete Beams Subjected to Combined Torsion, Bending and Shear, Civil Engineering Transactions, The Institution of Engineers, Australia, V. CE8, No. 2, pp. 143-157. Wang, W., 1995, Shear Strength and Fatigue Crack Propagation in Concrete by Energy Methods, PhD dissertation, Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ. Wang, W., and Hsu, T. T. C., 1997, Limit Analysis of Reinforced Concrete Beams Subjected to Pure Torsion, Journal of Structural Engineering, V. 123, No. 1, pp. 86-94. Wang, W.; Jiang, D.; and Hsu, T. T. C., 1993, Shear Strength of Reinforced Concrete Deep Beams, Journal of Structural Engineering, V. 119, No. 8, pp. 2294-2312. Yoo, C., and Heins, C., 1972, Plastic Collapse of Horizontally Curved Girders, Journal of the Structural Division, V. 98, No. 4, pp. 899-913. Yudin, V. K., 1962, Determination of the Load-Carrying Capacity of Rectangular Reinforced Concrete Elements Subjected to Combined Torsion and Bending, Beton i Zhelezobeton (Concrete and Reinforced Concrete), Moscow, No. 6, pp. 265-269. Zararis, P. D., and Penelis, G. G., 1986, Reinforced Concrete T-Beams in Torsion and Bending, ACI Journal, V. 83, No. 1, Jan.-Feb., pp. 145-155. Zbirohowski-Koscia, K. F., 1968, Stress Analysis of Cracked Reinforced Concrete Thin Walled Beams and Shells, Magazine of Concrete Research, V. 20, No. 65, pp. 213-220. Zhang, L. X., and Hsu, T. T. C., 1998, Behavior and Analysis of 100 MPa Concrete Membrane Elements, Journal of Structural Engineering, V. 124, No. 1, pp. 24-34. Zhu, R. R. H., and Hsu, T. T. C., 2002, Poisson Effect of Reinforced Concrete Membrane Elements, ACI Structural Journal, V. 99, No. 5, Sept.-Oct., pp. 631-640. Zhu, R. R. H.; Hsu, T. T. C.; and Lee, J. Y., 2001, Rational Shear Modulus for Smeared-Crack Analysis of Reinforced Concrete, ACI Structural Journal, V. 98, No. 4, July-Aug., pp. 443-451. Zia, P., 1961, Torsional Strength of Prestressed Concrete Members, ACI Journal, V. 57, No. 10, pp. 1337-1359. Zia, P., 1970, What Do We Know About Torsion in Concrete Members? Journal of the Structural Division, V. 96, No. 6, pp. 1185-1199. Zia, P., and Hsu, T. T. C., 1978, 2004, Design for Torsion and Shear in Prestressed Concrete, Preprint No. 3424, a paper presented at ASCE Convention, Chicago, IL, 17 pp.; Updated version: PCI Journal, 2004, Precast/Prestressed Concrete Institute, V. 49, No. 3, pp. 34-42. Zia, P., and McGee, W. D., 1974, Torsion Design of Prestressed Concrete, PCI Journal, V. 19, No. 2, pp. 46-65.