Documente Academic
Documente Profesional
Documente Cultură
132.5 amps
397.5 amps
265 amps
None of the above
8. A surface defect produces an indication which is?
Sharp and distinct
Wide and indefinite
Usually nonrelevant
Usually transverse
9. When magnetic fields are applied in two or more directions at the same time the resultant magnetic
field is known as?
A swinging field
A leakage field
An induced field
A vector field
10. Which of the following is the general procedure followed when demagnetising an article?
Reverse the field whilst reducing the magnetising force
Reverse the field whilst increasing the current
Keep the field constant whilst reducing the current
Keep the field constant whilst increasing the current
11. Magnetic particle indications are caused when magnetic particles are attracted at which of the
following?
Flux leakage
Magnetic poles
Leakage fields
All of the above
12. The bulb and filter of a black light must be cleaned regularly because?
Cleanliness gives the lab a professional appearance
Dust and dirt permit the passage of infra red and white light
Dust and dirt reduce the passage of black light
None of the above
13. A residual magnetic field is always?
Stronger than the magnetic field producing it
Weaker than the magnetisiing field producing it
Wet residual
Dry residual
20. The selection of the test method is primarily determined by the ??? of the test article?
Hardness
Configuration
Conductivity
Strength
Here are the corrections:
1. 6-8 inches / 150-200 mm
2. A magnetic field
3. Ferromagnetic
4. Greatest at the surface
5. All of the above
6. 880 amps
7. 265 amps
8. Sharp and distinct
9. A vector field
10. Reverse the field whilst reducing the magnetising force
11. All of the above
12. Dust and dirt reduce the passage of black light
13. Weaker than the magnetisiing field producing it
14. A non relevant indication
15. Magnetic writing
16. Increase the contact area and reduce the current density
17. Wet magnetic particles with alternating current magnetisation
18. Using excessive magnetising current
19. Wet continuous
20. Configuration