Documente Academic
Documente Profesional
Documente Cultură
Proceedings of ICAER-2016
U.Manoj Kumar
manoj5994@gmail.com
SRM Engineering College
C.AURDINO BOARD
I INTRODUCTION
This project aims at utilizing the solar energy of
the sun as well as the wasted heat of the
engine using a thermocouple. The energy
obtained from heat difference and the solar
energy are being utilized to power various
features.
A.THERMOCOUPLE
Thermocouple is an electrical device consisting
of two junctions comprising of two different
metals. The two junctions are produced by
welding the two distinct metals together.
Penetration thermocouple probe is being used
in this method. Thermocouple works on the
principle of see beck effect. seebeck effect
states that when two different junctions of
two different metals are maintained at two
different temperatures, an emf is induced.
This emf is directly proportional to the
difference in between the two temperatures.
D.GPS
GPS is the acronym of global positioning
system. Gps is used to locate the position, time
of an object anywhere within the view of gps
satellites. Three GPS satellites are required to
locate the two dimensional position of an
object anywhere within the earth. A separate
GPS module designed for audrino named
Ublox GY-NEO6MV2 GPS Module is being used
in our setup. GPS module along with a LCD is
connected to the audrino which helps us to
navigate.
B.SOLAR PANEL
A solar panel is a device that collects and
converts solar energy into electricity.
Photovoltaic panels are used to generate
electricity from sunlight .Solar energy
www.iaetsd.in
V.Rishikumar
rishivasanth19@gmail.com
R.M.K Engineering College
18
IAETSD 2016
ISBN:978-1534910799
Proceedings of ICAER-2016
E.LCD
LCD is the acronym of liquid crystal display.
Liquid crystal display uses the light modulating
property of the liquid crystals. LCD is more
energy efficient than cathode ray tubes and
Arduino can be easily disposed. LCD module
used in Arduino is 2.4inch TFT LCD
SPFD5408 .LCD is connected to the audrino to
which the GPS module is connected. LCD in our
system can be used as a GPS receiver
F.WI-FI
G.RADIO
Radio is the use of radio waves to carry
information,
such
as
sound,
by
modulating some property of electromagnetic
waves transmitted through space, such as
their amplitude, frequency, phase, or pulse
width. The radio module used in our system is
RDA5807M FM Stereo Radio Module RRD-102
V2.0 Wireless Pro.However in order to control
the sound and frequency LM386 200 Gain
Audio Amplifier Module needs to be used in
the audrino
II WORKING
One junction of the penetration type
thermocouple is kept near the engine cylinder
and the other junction of the thermocouple is
kept near the ac duct. The temperature of the
hot junction is around 1700c due to
convective heat transfer and the temperature
of the cold junction is around 13c near the ac
www.iaetsd.in
19
IAETSD 2016
ISBN:978-1534910799
Proceedings of ICAER-2016
III RESULT
To avoid the usage of high powered car
batteries for display and connection purpose
this leads to heavy load.
www.iaetsd.in
20
IAETSD 2016