PP INSPECTION
Ca =)=ints
BS EN 13598-1:2003
BS EN 1253-4:2000
Unrivalled Quality In
The Underground
1DYe-latcle( MUL cisCChezy Industries Sdn Bhd was incorporated on the 8th of November
Dee eGR mec)
at Bandar Pinggiran Subang, Shah Alam, Selangor.
CO ee uu ec eae ay
Chambers in January 2009 for the building and construction industry.
CL Coie ee
in the construction industry and complies with BS EN 13598-1:2003,
SO Re Ce oe as
‘and modernization of our country, especially in terms of sewerage
Den
With many years of experience in both manufacturing and marketing in
this industry, Chezy Industries has established their own network with
distributors (hardware outlets), consultants, architects, developers and
Pras
‘Our 315 mm PP inspection Chambers allow for easy access to the drainage system for maintenance inspection, oding and the
removalat debris. Chezy Preformed Pls Inspection Chambers area simple push-fit ssembly and have been designed to oer
loss labour intensive and more economical ataratives to radtonal construction methods,
‘Te connections tothe Crezy PP Inspection Chamber ae flexible and alw fora detection of poe of 2° in all rections. Our
‘chamber wil not leak even i hee is ground setlement of 50 mm 2 inches). Our PP Inspection Chambers aw for incoming
pipes and one outet. Connections nat used canbe sealed by plugs provided
CHAMBER BASE BODY RISER COVER AND COLLAR
The chamber base is avaiable fr both This secon of the PP Inspection The chamber sser pices are designed The Chezy PP Inspection Chamber caver
110 mm and 160 mm drainage layouts, Chamber is joined to the base by a for dy Jointing and have strengthening and colar is made of high impact and UW
with branch inlets designed to optimize simple dry jointing method (ubber rng), bs or adonlstuctualswength and stabilzed ABS. I has been tested to BS
flow 0.7 kNim? Shall conform to EN ISO 9969 ENISO 9969
‘Vacuum requirement for resistance No damage tothe structure Test EN 1277-1996
‘of PP Inspection Chambers to that could be deemed to temperature Condition &
ground and water pressure when impair its function Test period
installed Internal negative
pressure
Resistance to vertical loading Deflection of horizontal dimensions Force forclassL_15KN. Clause 4 of EN 1253-2:1998
not to exceed 6% Deflection of
cover shall conform to clause 4
‘of EN 1258-1:2008, <0.4%
No crackingWe