Sunteți pe pagina 1din 2

MULTIFLO

MF-420EX

MF Heavy Duty Mine Dewatering Pumps


Multiflo MF vacuum primed dewatering pump
Weir Minerals Multiflo is the market leader for high quality
mine dewatering pump units, leading with the heavy duty MF
range of auto vacuum primed, diesel driven pump units. The
Multiflo MF pump units are custom-built to ensure the very best
performance for your operation and survival under the toughest
operating conditions.

The heavy duty, auto


vacuum primed Multiflo
mine pit dewatering pump.

Multiflo MF pump features include:











Engineered pump solution


Fully customized to your needs
Built for mining
Highest quality build
VisMode pump management system
Vactronic auto vacuum prime
Heavy duty steel fabricated pump base and canopy
All welds are continuous (no stitch welding that traps water
causing rust in inaccessible places)
Multiflo specified two pack epoxy paint system
Comprehensive operations and spare parts manuals

Multiflo MF-420EX

Vactronic Auto Vacuum Priming System


When the Multiflo MF pump unit is started, the Vactronic
priming system will quickly and efficiently evacuate the air and
allow the water to enter the priming tank and the pump will
then be primed. Once the water in the priming tank contacts the
upper probe, the drive to the vacuum pump will disengage. If
at any time the level in the priming tank drops below the upper
probe, the drive will re-engage and allow the water to re-enter
back to the probe level. With this system, the vacuum pump life is
prolonged as it is only operating when required.
Waterloss shutdown
Waterloss shutdown is another feature of the Vactronic priming
system. If there is no more water to be pumped, the level in the
priming tank will fall below the lower probe and activate a six
minute timer to shut down the pump unit.

MULTIFLO 420EX
Pump
Model
Discharge (mm)
Suction (mm)

240
220

Impeller
420EX Vanes
150 Type
200 Material

4 IMP Dia (mm)


Closed Max PRM
H7A Max Solids (mm)

Curve
660 Revision
1700
50mm

Head, H (m)

200
180

160

140

120

100

80

Cat C32 'B' rated Max


Cat C27 'A' rated Max

60
40

20
0

20

40

60

80

Data for clean cold water only

100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460

Flow Rate, Q (L/s)

Multiflo MF pump benefits to the


customer




Reliability
On-site service and support
Built to last
Tailored to the application
Long term cost/benefit solution

Customer Options













Wear resistant materials


Stainless steel wetted parts
Choice of engine manufacturer
Suction hose
Suction boom & Winch
Discharge pipe
Hydrau-Flo safety refueling valves
Auto lubrication
Service lights
Strobe lights
High lift skid
Pontoon
Auto start/stop system
Engineered custom options

Model MF-420EX
Ratings Metric (US/IMP)

Pump

Pump Impeller Data

Pump Inlet

200 mm (8)

Type - Closed

Pump Outlet

150 mm (6)

200x150 single stage


centrifugal

Shut-Off Head

220 m (722ft)

Material H7A

Frame FFY

Imp. 660 mm

Seal Gland Packed

Max Flow

300 l/s (4755 US Gpm)

Engine KW (at 1700 RPM)

590 kW (787 Hp)

Max. RPM 1700


Vanes - 4

Fuel Tank

4000 ltr. (1057 US Gal)

Max. Solid 50 mm

Construction
Pump Casing A48
Shaft 1045 Stainless Steel

Engine
Caterpillar C27 ACERT (standard)
Caterpillar C32 ACERT (optional)
For aggressive water applications, all wetted parts are available in stainless steel

Dimensions



A
B
C
D
E
F
G
H
I
Mass Wet Mass Inc Skid Mass Inc Pont
mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) kg (lbs)
kg (lbs)
kg (lbs)
6240
2040
3470
8516
2121
3886
10710
5120
4750
18000
21300
28990
(246)
(80)
(137)
(335)
(83)
(153)
(422)
(202)
(187)
(39683)
(46958)
(63912)
Skids and pontoon options available upon request.

Standard models available in the Multiflo CF range Electric models in the Multiflo ME range Submersible pumps available in the Warman SJ range

Weir Minerals Offices

The Weir Group PLC, founded


in Scotland in 1871, is a
leading global engineering
company with more than 8000
employees worldwide and is
listed on the London Stock
Exchange.
Balikpapan
Banjarbaru

Coolum

Weir Minerals Multiflo is part


of the Weir Minerals Division
and has primary global design
responsibility for the Multiflo
self-prime dewatering pump
product range and Hydrau-Flo
fuel filler valve.

Weir Minerals Multiflo and PT Weir Minerals Multiflo are business units of Weir Minerals Australia Ltd.
Weir Minerals Multiflo
15 Dacmar Road
Coolum Beach QLD 4573
Tel +61 7 5449 3000
Fax +61 7 5446 4304
multiflo@weirminerals.com
www.weirminerals.com

P.T. Weir Minerals Multiflo

Jl. Mulawarman No. 29A Batakan Kecil Kel. Manggar Balikpapan


East Kalimantan
Tel +62 542 746098 (Hunting) Fax +62 542 746099
Branch Office
Jl. Ahmad Yani Km. 33,6 No. 04 RT.003 RW.001 Kel. Loktabat Selatan
Banjarbaru 70712 South Kalimantan
Tel +62 511 4773027 / 4772357 Fax +62 511 4773583

Excellent
Minerals
Solutions

The products and systems which are described in this publication are manufactured and sold by Weir Minerals Australia Ltd and its business
units, and are covered by both patents and designs which are pending or granted worldwide in the name of Weir Minerals Australia Ltd.
WARMAN, MULTIFLO, HYDRAU-FLO, VISMODE and VACTRONIC are registered trademarks of Weir Minerals Australia Ltd. All rights reserved.
CATERPILLAR and CUMMINS are not trademarks of Weir Minerals Australia Ltd. Weir Minerals Australia Ltd sells its products fitted with
authorised products sourced from the brand owners of CATERPILLAR and CUMMINS.
Copyright 2012. Weir Minerals Australia Ltd. All rights reserved.

Issued August, 2012

S-ar putea să vă placă și