Documente Academic
Documente Profesional
Documente Cultură
STRENGTH TESTS
CLASSIFICATION & INDEX TESTS
TRIAX (continued)
19
73
204
0.10
153
2.60
209
94
94
170
275
add
47
CONSOLIDATION TESTS
Consolidation (ASTM D2435)
376
- #4 Sieve
+#4 Sieve
- #4 Sieve
89
157
110
89
57
Porosity
Total (ASTM D7263 / API RP40)
(Includes Moisture Content, Dry Density &
Specific Gravity)
Effective (ASTM D6836m)
(Includes Total Porosity, Moisture Content,
Dry Density & Specific Gravity)
109
TRIAXIAL COMPRESSION
235
Unconsolidated-Undrained
MOISTURE DENSITY RELATIONS
Standard Proctor (ASTM D698)
4-inch mold
6-inch mold
Modified Proctor (ASTM D1557)
4-inch mold (w/ assumed Gs for rock corr.)
6-inch mold (w/ assumed Gs for rock corr.)
260
311
42
62
328
Minimum Density
0.1 ft3 mold
0.5 ft3 mold
230
Consolidated-Undrained w/pp
470
Consolidated-Drained
ASTM D7181 (TX-ICD)
600
136
99
Consolidated-Undrained
260
311
157
add
240
362
(ASTM D4254)
119
240
540
1130
350
585
75
EXPANSION / COLLAPSE
TESTS
Expansion Pressure Curve
(ASTM D3877m)
157
add
27
Expansion Index
(UBC)
(ASTM D4829)
418
392
328
549
39
Cooper Testing Labs, Inc. - 937 Commercial St. - Palo Alto, California 94303 - T) 650-213-8436, F) 650-213-8437
37
CAL-TRANS / AGGREGATE
TESTS
CBR (ASTM D1883)
With compaction
Compaction Provided by Client
HYDRAULIC CONDUCTIVITY
& PERMEABILITY TESTS
318
(For clean sand and gravel with less than
825
514
250
32
57
add
add
318
add
add
350
585
add
add
540
1130
156
130
Hourly @
136
includes remolding
6 Diameter Cell (ASTM D2434)
418
12 Diameter Cell (can test up to 2 rock) 836
(There is no ASTM procedure for >0.75 rock)
935
156
193
412
659
240
1 x #4 (or finer)
1.5 x 3/4
2.5 x 1.5
Pit Run
LA Abrasion
500 revolutions (ASTM C131/CT 211)
1000 revolutions (ASTM C535)
add
83
add
271
32
423
Double Hydrometer
423
88
47
add
156
88
As Received
As Received & Air Dried
4 Point from As Received to Oven Dry
6 Point from As Received to Oven Dry
193
200
400
800
1200
240
328
120
Witness Testing
per person, per hour
LABORATORY TIME
WATER TESTS
Particle Size Distribution (ASTM D3977c )
full gradation curve
300
Total Suspended Solids
109
136
167
83
63
47
(ASTM D3977 b)
(SM2540C)
47
Total Solids
(SM2540B)
47
276
Compaction Tests
(ASTM D6276)
527
(ASTM C 1202)
(per fraction)
ROCK TESTS
37
add
350
Atterberg Limits
X-Ray of samples
Cal impact (see moisture-density relations)
Lab Percolation/Infiltration
(for bio-retention material)
57
OTHER TESTS
-3
add
109
R-value
Minimum Charge
81
Corrosion Testing
Individual Tests
Price
Standard
Sample Quantity
(Excluding Gravel)
$67
ASTM G57
500g
67
ASTM G57
500g
146
CT 643/AASHTO T288
500g
Resistivity (minimum)
(Gravelly Samples: Class II AB, Drain Rock, etc. add $85)
pH
32
150g
Sulfate
52
150g
47
ASTM G200
150g
Chloride
42
150g
Sulfide
42
150g
Price
Package
Sample Quantity
$240
Caltrans
1000g
170
1000g
170
1000g
211
1000g
211
1000g
247
1000g
Test results for the pH, sulfate and redox potential tests can be affected by the way the samples are collected and handled. Ideally, samples should be collected in such a way as
to minimize contact between the soil and the air. For example, collect a full brass liner of soil then quickly seal it with caps and tape. Because these tests can be affected by
microbial activity it is best to keep the sample in a cooler with ice until it is delivered to our lab.
Vadose Zone-Package 2
---
Hydrogeology-Package 1
Hydrogeology-Package 2
---
Total Porosity (t) ASTM D7263 Total Porosity (t) ASTM D7263 Total Porosity (t) ASTM D7263 Total Porosity (t) ASTM D7263
Grain Density ASTM D854
D2216
D2216
Volumetric Water Content (w) Volumetric Water Content (w) Volumetric Water Content (w)
Hydraulic Conductivity
Hydraulic Conductivity
ASTM D422
ASTM D422
ASTM D422
ASTM D422
(USDA by request)
(USDA by request)
(USDA by request)
(USDA by request)
$711
$350
$706
$564
*Optimum Turn-Around-Times
add
61
Client must provide fresh cement, bentonite or lime for admix testing. The manufacturers are always happy to send free product
for admix testing. If the client requests us to use
product on hand from other projects we do not
take responsibility for bad product due to aging
or hydration. The test results may be significantly affected due to aged or hydrated product.
add
15%
TEST
Bus. DAYS
Compaction3
Collapse.6+
Consolidation...11+
CRS4+
Direct Shear, drained.7+
Direct Shear, Undrained.3
Durability Index (Caltrans)....4
Expansion Tests
Shrink-Swell..6+
Consolidation Stations
Expansion Pressure.6+
SS+Exp. Pressure.10+
The time can vary dramatically depending upon the plasticity of the material. A non-plastic soil may complete
in 2-3 days while a plastic soil may
take 2 weeks.
Expansion Index...4+
Liquid & Plastic Limits
Wet prep method....7+
Dry prep method........4
Moisture Density...3
Minimum Index Density...3
Triaxial Stations
Maximum Index Density...3
Organics (TOC).3
Porosity
Total...4+
Effective10
Permeability
Constant Head (rigid wall).4
Falling Head (flex wall).5+
Sand Equivalent.3
Sieve Analysis.. 4
Sieve & Hydrometer..6
-#200 Wash....4
Slake Durability.5
Specific Gravity.4
LA Abrasion...3
Cleanness Value.4
Sodium Sulfate Soundness 8
Rapid Chloride Permeability..4
Pinhole ...4
Torsional Ring Shear, Cooper, Stark, Riley Torsional Ring Shear (per pt).....2
Triax (isotropic)
UU..3
CU..5
CU-PP5
CD..6+
*Anisotropic add 2 days per point
*Ko add 2 to 4 days per point
*High Confining Pressure add 2 days
per point