Documente Academic
Documente Profesional
Documente Cultură
DESCRIPTION
The Enhanced Jupiter Magnetostrictive level transmitter
provides a 420 mA output proportional to the level
being measured or FOUNDATION fieldbus output. Jupiter
is available as an externally mounted model for use
with Orion Atlas, Gemini, and Aurora magnetic level
indicators or as a direct insertion version for use in a
wide variety of process vessels or external chambers.
A dual compartment design housing allows for separation of wiring and electronics and helps facilitate simple,
easy installation and set-up for top, bottom, and direct
insertion mount versions.
SIL 2
F E AT U R E S
Precision level measurement 0.015" (.381 mm)
Two-wire, loop-powered intrinsically safe and
explosion proof level transmitter
420 mA output with HART
Optional FOUNDATION fieldbus output
LCD with 3-key push-button standard
High repeatability 0.005" (0.127 mm)
Multi-variable transmitter able to measure level,
interface level and level & interface level
Maximum Process temperatures
Direct Insertion Model: +500 F (+260 C)
External Mount: +850 F (+455 C)
-40 to +160 F (-40 to +70 C) ambient operation
Lengths to 400 inches (999 centimeters)
Third Party Safety Integrity Level (SIL) data (FMEDA
analysis) for Safety Instrument Systems engineering
is available. HART version is suitable for SIL 2
loops: Safe Failure Fraction (SFF) = 90.7%
A P P L I C AT I O N S
Separators
Propane Vessels
Surge Tanks
Process Vessels
Gas Chillers
Storage Vessels
Alkylation Units
Interface
Batch Tanks
TECHNOLOGY
The Enhanced Jupiter transmitter utilizes the engineering
principle of magnetostriction and the effect of a magnetic
field on the magnetostrictive wire as the basis for operation of the instrument. The primary components are the
probe assembly containing the wire and the electronics
assembly.
A low energy pulse which is generated by the electronics
travels the length of the magnetostrictive wire. A return
signal is generated from the precise location where the
magnetic field of the MLI float intersects the wire. A timer
precisely measures the elapsed time between the generation of the pulse and the return of the mechanical or
acoustic signal. This is detected by the acoustic sensor
located below the cast aluminum electronics housing. The
software is set up to interpret the time-of-flight data and to
display and transmit the process variable data resulting
from the measurement.
SAFETY
INTEGRITY
LEVELS
1 & 2
Jupiter
SIL
Model
26X
1 as 1oo1
2 as 1oo1
83.7%
90.7%
9.60E-04
5.45E-04
Instrument Type
SFF
PFDavg
SIL Brochure
Models
20X/22X/24X
FITS
Annual
FITS
Annual
Fail Dangerous
Undetected
218
1.91E-03
123
1.08E-03
Fail Dangerous
Detected
698
6.11E-03
793
6.95E-03
Safe
421
3.69E-03
413
3.62E-03
INTERFACE
MEASUREMENT
AND
EMULSION
L AY E R S
PA C T WA R E
PC
SOFTWARE
PROGRAM
A P P L I C AT I O N S
The Enhanced Jupiter transmitter is designed for mounting
directly to new or existing Orion Atlas, Aurora, Gemini,
and many competitors magnetic level indicators or can be
inserted directly into the process vessel.
E X T E R N A L L Y
T O
A T L A S
M O U N T E D
D I R E C T
I N S E R T I O N
C H A M B E R
MAD E IN USA
E X T E R N A L L Y
I N T E R F A C E
M O U N T E D
L E V E L
AGENCY
A P P R O VA L S
AGENCY
MODEL
PROTECTION METHOD
AREA CLASSIFICATION
FM & CSA
2X1-XXXXXXX-XXX
2X2-XXXXXXX-XXX
2X3-XXXXXXX-XXX
2X4-XXXXXXX-XXX
Intrinsically Safe
Class I, Div. 1:
Groups A, B, C, & D
Class II, Div. 1:
Groups E, F, & G
Class III, IP66 TYPE 4X, T4 @80C
Entity
ATEX
2XX-XXXXXXX-XXX
Explosion Proof
2XX-XXXXXXX-XXX
Non-Incendive
2XA-XXXXXXX-XXX
2XB-XXXXXXX-XXX
2XC-XXXXXXX-XXX
2XD-XXXXXXX-XXX
Flame Proof
2XE-XXXXXXX-XXX
2XF-XXXXXXX-XXX
2XG-XXXXXXX-XXX
2XH-XXXXXXX-XXX
Intrinsically Safe
Class I, Div. 1
Groups B, C, & D
Class II, Div. 1
Groups E, F, & G
Class III, IP66 Type 4X T5 @80C
Class I, Div. 2
Groups A, B, C, & D
Class II, Div. 2
Groups E, F, & G
Class III, IP66 Type 4X T5
II 1/2 G EExd IIC T6 @70C
S P E C I F I C AT I O N S
PERFORMANCE
Accuracy
Repeatability
Linearity
Maximum level rate of change
Response time
Warm-up
Upper dead zone
Lower dead zone
Ambient temperature range
Process temperature
Transmitter:
LCD:
External Mount:
Direct Insertion:
Humidity
Electromagnetic compliance
Environmental protection compliance
Drop protection compliance
Surge Protection Compliance
Maximum Pressure (Direct Insertion)
0.015"
0.005% of full span or 0.005" (0.127 mm) (whichever is greater)
0.020% of full span or 0.031" (0.794 mm) (whichever is greater)
6 inches per second (models with HART)
0.1 second
<5 second
None
<2" (5 cm), SIL 2: <5" (13 cm)
-40 to +175 F (-40 to +80 C)
-10 to +160 F (-20 to +70 C)
-40 to +248 F (-40 to +120 C)
-320 to +850 F (-195 to +455 C) (with factory insulated MLI)
-40 to +200 F (-40 to +95 C)
-40 to +500 F (-40 to +260 C) (high temperature probe)
0 to 99% non-condensing
EN 61326
EN 60654-1
EN 50178
EN 61326 (1000 V)
1700 psig @ +100 F (117 bar @ +38 C)
(limited to the pressure rating of the selected flange or float)
S P E C I F I C AT I O N S
FUNCTIONAL
Measured variables
12-28 VDC
Signal output
420 mA
420 mA with HART 5.0
NAMUR NE 43 compliant with 3.8 to 21.5 mA useable range
Loop resistance
Power consumption
Damping
0 to 25 seconds
Error signal
User interface
Display
Resolution
Analog:
Digital:
0.01 mA
0.01 units
Span
SIL 2
20.5 mA
1000
800
620
600
400
200
24 VDC
0
11
10
20
30
40 VDC
Power Consumption
S P E C I F I C AT I O N S
PHYSICAL
Enclosure type
Dual compartment
Enclosure material
Enclosure finish
Enclosure rating
NEMA 4X7/9, IP 66
Sensor material
Sensor length
S P E C I F I C AT I O N S
PHYSICAL
Typical Dimensions
Inches (mm)
8.00
(203)
11.5
(292)
11
(279)
12.5
(318)
8
(203)
11.5
(292)
Flanged or
NPT Connection
Direct Insertion
MAD E IN USA
MAD E IN USA
MAD E IN USA
Top Mount
11.5
(292)
11
(279)
12.5
(318)
8
(203)
MAD E IN USA
MAD E IN USA
MAD E IN USA
MODEL
NUMBER
OUTPUT
4
5
6
7
8
MATERIALS OF CONSTRUCTION
1
7
2
3
5
6
MOUNTING CONNECTION
See page 9
FLOAT
See page 10
PROBE UNITS
E
M
Inches
Centimeters
PROBE LENGTH
See page 10
temperatures of 500850 F
(260455 C)
2
8
MODEL
NUMBER
68
6K
6L
6M
6N
6P
BA
BB
BC
BF
BG
BH
BJ
CA
CB
CC
CF
CG
CH
CJ
DA
DB
DD
DE
DF
DG
DH
DJ
EA
EB
ED
EE
EF
EG
EH
EJ
FA
FB
FD
FE
FF
FG
FH
FJ
4'' 2500#
4" 600#
4" 900#
4" 1500#
4" 2500#
4" 3A
DN25 PN16
DN25 PN25/40
DN25 PN64/100
DN25 PN160
DN25 PN250
DN25 PN320
DN25 PN400
DN40 PN16
DN40 PN25/40
DN40 PN64/100
DN40 PN160
DN40 PN250
DN40 PN320
DN40 PN400
DN50 PN16
DN50 PN25/40
DN50 PN64
DN50 PN100
DN50 PN160
DN50 PN250
DN50 PN320
DN50 PN400
DN80 PN16
DN80 PN25/40
DN80 PN64
DN80 PN100
DN80 PN160
DN80 PN250
DN80 PN320
DN80 PN400
DN100 PN16
DN100 PN25/40
DN100 PN64
DN100 PN100
DN100 PN160
DN100 PN250
DN100 PN320
DN100 PN400
RF ANSI Flange
RTJ ANSI Flange
RTJ ANSI Flange
RTJ ANSI Flange
RTJ ANSI Flange
Triclamp (Material Code 6 only)
DIN 2527 Form B Flange
DIN 2527 Form B Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form B Flange
DIN 2527 Form B Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form B Flange
DIN 2527 Form B Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form B Flange
DIN 2527 Form B Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form B Flange
DIN 2527 Form B Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
DIN 2527 Form E Flange
2
9
MODEL
NUMBER
0.84
0.70
0.64
316/316L SS
diameter length
Titanium
diameter length
Hastelloy C
diameter length
316/316L SS Sanitary
diameter length
AA
2" 2.75" float
(50 70 mm)
AB
2.30" 3.00" float
(58.5 76 mm)
AC
2.55" 3.00" float
(65 76 mm)
BA
2.00" 2.75" float
(50 70 mm)
BA
2.00" 2.75" float
(50 70 mm)
BB
2.30" 3.00" float
(58.5 76 mm)
BB
2.30" 3.00" float
(58.5 76 mm)
CA
1.85" 3.00" float
(47 76 mm)
CB
2.30" 3.00" float
(58.5 76 mm)
DA
2.00" 2.75" float
(50 70 mm)
DB
2.30" 3.00" float
(58.5 76 mm)
Custom float
ordered separately
Custom float
ordered separately
Custom float
ordered separately
Custom float
ordered separately
Custom float
ordered separately
0.52
316 SS
(diameter length)
Titanium
(diameter length)
Hastelloy C
(diameter length)
316L SS
(diameter length)
MA
2.00" 2.75" float
(50 70 mm)
MB
2.00" 2.75" float
(50 70 mm)
NA
2.00" 2.75" float
(50 70 mm)
NB
2.30" 3.00" float
(58.5 76 mm)
PA
1.85" 3.00" float
(47 76 mm)
PB
1.85" 3.00" float
(47 76 mm)
QA
2.00" 2.75" float
(50 70 mm)
QB
2.00" 2.75" float
(50 70 mm)
PROBE LENGTH
00
Pressure / Temperature
400
316/316L SS
350
Hastelloy C 276
PSIG
300
250
200
150
50
0
0
100
200
300
Temperature F
10
Titanium CP2
100
400
500
DIRECT
INSERTION
ENHANCED
JUPITER
TRANSMITTER
A P P L I C AT I O N D ATA S H E E T
Quote Reference #
Contact Phone #
E-mail Address
13"
(33 cm)
ACTIVE
SPAN
Yes No
Yes No
Vibration present
Yes No
ORDER
LENGTH**
(see note below)
11
Bulletin: ORI-148.4
Effective: November 2007
Supersedes: November 2006