Technical Specification for Water Meter Size (2,3,8,12 inches) No.
2 3 4 5
DESCRIPTION
CONFIRMATION
The water meters shall be in accordance with ISO 4064
class B all position, and OIML certificate or an equivalent from manufacture country. The water meters shall be used to register quantities of water pumped.
The water meters shall be capable to operate with
water having suspended solids. The water meters shall be turbine type (axial flow horizontal helix, or vertical turbine). The meters shall be dry dial type and magnetic drive. Water meters shall be provided with standard pulsar, or optionally with high resolution pulsar capable of transferring flow rate and flow direction ready for connection to a data logger.
The meters shall be provided with hermetically
capsuled register reading in cubic meters.
The register shall have a test index circle divided into 10
equal parts.
10
11 12 13 14
15
Totalizer shall be digital type capable of
registering at least 999999 m3. The totalizer shall be set at 0(zero). The meters shall be tamper proof, and shall have protective device which can be sealed in such a way that after sealing, both before and after the water meter has been correctly installed there is no possibility of dismantling or altering the water meter or its adjustment device without damaging the protective devices. Sealing material must be stainless steel wire and aluminum seal. The lid of meters shall be made of brass or high qaulity plastic for protection purposes. The working pressure shall not be less than (16 ) bar for all items . The entire flow range the permissible head loss shall not exceed 1 bar. The test pressure nevertheless shall be 1.6 times the nominal pressure and twice the nominal pressure as specified in the standards.
DEVIATION
No.
DESCRIPTION
16
The meters shall be supplied with flanged connections.
Flanges shall be of PN16 for all items.
17
Flanges drilling shall be in according to B. S. 45204.
18
19
20
21 22
23
24
25
26
27
CONFIRMATION
The meters shall be provided with steel companion
flanges, gaskets, bolts and nuts The bodies of bulk water meters casing for flanged ends meters shall be made of cast iron, or Ductile (for PN 25), or steel for (PN 25&40).
The meters shall be protected against external
and internal by an epoxy powder coating and the material of the meter shall be resistant to corrosion . Materials in contact with water shall be non toxic and shall not affect the quality of the water . The meters shall be capable to operate in a water temperature up to 50co. Materials of the meters shall be capable to resist chlorine dose up to 5 ppm, also shall resist impurities in water. The measuring mechanism shall be removable type. Therefore the measuring mechanism can be completely removed from the meter casing. The measuring mechanism shall also be secured against removal from the body by a seal. The permissible continuous load for meters of given size shall conform with ISO 4064 and shall not be below nominal flows ( Qn) given below : DN50 15 m3/h DN80 40 m3/h DN200 250 m3/h DN300 600 m3/h
All catalogues, operation and maintenance
manuals, spare parts list and price list etc. shall be provided with the offer. Evidence of compliance with technical specifications and standard as well as the certificate of testing for accuracy, pressure, and capacities is required. Approval certificates of relevant authorities, such as EEC, BS, or AWWA, shall be provided.
DEVIATION
No.
28
29
30
DESCRIPTION
CONFIRMATION
The size , model , serial number , Q n ( nominal
flow rate in m3/h ) , direction of flow , year of manuacturing , stamped with initial WAJ , meteorological class , working pressure , indicated on all meters , and all other marking shall be in accordance to standards . Aseparate price quotation shall be submitted for the tenders recommended spare parts sufficient for at least two years of meter maintenance. The bidder shall however bid on the spare parts listed in the bill of quantities. Evaluation of tenders, Any deviation from these specifications will result in rejection of the tender as non- responsive. The purchaser will evaluate all qualifying tenders based on price, compliance with these specifications and any technical features of specific value and importance to the purchaser. A uniform rating sheet will be used to evaluate all qualifying tenders.