Documente Academic
Documente Profesional
Documente Cultură
Question 1
Figure 1
Question 2
The i-vv characteristic of a light bulb is given in Figure 2. If the rated voltage is 120 V.
Calculate:
(a)
The wattage rating of the bulb.
(b)
The resistance of the bulb under rated condition.
Figure 2
Question 3
Find v1 and v2 for the network given in Figure 3.
Figure 3
Question 4
Draw the waveform for the current in 12F capacitor when the capacitor voltage is as described in
Figure 4
Figure 4
Question 5
Before load is applied the terminal voltage of the power supply is set to 40 V. The terminal voltage
drops to 38.5 V, when a load of 500 is attached to the supply.
(a)
What happened to the remainder of the no load voltage?
(b)
Calculate the internal resistance of the source.
(c)
Calculate the voltage regulation of the network.
BEF12603 Electronic Circuit Theory | Rohaiza Hamdan
Question 6
Figure 6 show a one-port
port network consisting of two linear elements connected in parallel. Calculate v
when i= 3 A.
Figure 6
Question 7
Calculate the voltage regulation of a supply having the characteristic of Figure 7.
VL (V
V)
120
100
IL (A)
0
10
I FL
Figure 7
Question 8
Determine V1, V2 and the current I for the network shown in Figure 8.
Figure 8
Question 9
Is
10V
3Is
Vo
Figure 9
Question 10
Find V1 and V2 for unloaded and loaded potentiometer in Figure 10.
Figure 10
Question 11
For the sinusoidal function v(t) = 10sin377t. When v = 4V, determine:
(a)
The angle at which the magnitude obtained
(b)
The time at which the magnitude is attained
Question 12
The current through a 5 resistor is i(t) = 40sin(377t). On the same plane, sketch the current and
voltage waveform for the resistor.