Documente Academic
Documente Profesional
Documente Cultură
SECTION 099100-1
INTUMESCENT FIREPROOF COATING
099100-1
VNTA
Revision Record:
Rev
Date
Prepared by :
K. Hirose
Purpose/Status
Reviewed by :
M. Oizumi
Revision
By
Approved by :
Y. Furukawa
099100-1
VNTA
Provide intumescent fireproof coat on steel structural members, minimum 2.5 hrs for columns
and girders, 1 hrs for beams
B.
Application
1.
C.
Surface Preparation: Refer to Section 051200 Structural Steel Framing for shop
preparation of steel substrates in accordance with SSPC-SP3.
a.
Ensure that exposed substrate is clean, dry and free from any contamination such
as grease, oil, or salt formation.
b.
All steel surfaces to be free of pinholes, voids, gaps and irregularities, and inside
and outside corners are to be straight and even. Remove welding spatter, flux, and
all loose mill scale, loose paint, and other loose matters by power wire brushing,
power sanding, power grinding, power tool chipping and power tool descaling.
c.
Remove dust and dirt with cloth or tool. Repair areas where finishes have peeled
off.
d.
Remove water and oil with solvents that do not to cause a reduction of adhesion.
e.
f.
2.
3.
4.
5.
Site Application
a.
b.
c.
d.
e.
Secure drying time and proper curing conditions in accordance with the
manufacturers instructions.
f.
PAINTING
SPECIFICATION NO. T120226
Copyright2015 NIKKEN SEKKEI LTD
099100
Page 1 of 2
VNTA
D.
Quality Control
1.
The Contractor shall submit MSDS sheets or official reports of proposed products to
verify that the paint does not produce any toxic substances harmful to the human bodies
and environment including under the conditions of hot and humid weather, certified by
the manufacturers or by a Qualified Testing and Inspection Agency.
2.
Secure dry film thickness in order to satisfy required fire rating. Follow the
manufacturers instructions.
3.
Particular care shall be paid during handling, transportation, and storage. If the coating
surface is damaged, follow with the manufacturers instructions for repair.
4.
PAINTING
SPECIFICATION NO. T120226
Copyright2015 NIKKEN SEKKEI LTD
099100
Page 2 of 2