Documente Academic
Documente Profesional
Documente Cultură
PROPERTIES:
Carbon steel in hot rolled and normalised or similar condition: shape, plate, tube, bar and forging of
structural quality in the killed condition.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchase Order the
data from the Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchase Order or a FLS Instruction
always overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the suppliers
documentation covers at least the documentation required in the Primary Listed Standard. This means that
supplementary tests in some cases will be necessary.
Primary Standard:
CHEMICAL COMPOSITION:
Dim. mm
% C max or
range
% Si max or
range
% Mn max or
range
% P max or
range
% S max or
range
% N max or
range
% Al min or
range
0-16
0.17
1.4
0.045
0.045
0.009
16-40
0.17
1.4
0.045
0.045
0.009
40-
0.20
1.4
0.045
0.045
0.009
Rev_No
Tensile
Strength
MPa
Yield Strength
MPa
Elong.
%
Rm
Re
A5
HRc
HB
HV
0-3
360-510
235 -
21 -
206
20
27
3-16
340-470
235 -
26 -
206
20
27
16-40
340-470
225 -
26 -
206
20
27
40-63
340-470
215 -
25 -
206
20
27
63-100
340-470
215 -
24 -
206
20
27
100-150
340-470
195 -
22 -
206
20
27
150-200
320-470
185 -
21 -
206
20
23
200-250
320-470
175 -
21 -
206
20
23
Dim.
mm
: 1,0
Issue Date:
Revision Date:
Area Reduction
01-06-1998
08-06-2005
M.Elas
GPa
Prepared by:
Approved by:
Imp. Energy
KV, Min
Hardness
AsK
ESJ
Page 1 of 3
MAT 1100
MCGB - DATA SHEET FOR SUPPLIERS
Type of Material
Sheet & Strip hot rolled
Plates
General
Bars
Forgings
Plates & Bars
Plates & Bars
Plates & Bars
Forgings & Hot rollings
DIN:
EN:
ISO:
JIS:
Name of Material
SS Grade36[250]type 1
Gr. B or C
A36
Gr. 1015 - 1018
Cl. C
S 235 JRG 2 FN
Fe 630 B
SS 400
S 15 C
Material No.
.
.
.
.
.
1.0038
.
.
.
Deutsche Industrie-Norm
European Norm
International Organisation of Standardization
Japanese Industrial Standard
DELIVERY CONDITIONS:
The steel shall be delivered in the killed condition.
Rimmed steel is not permitted.
Products supplied according to the Primary Standard will be delivered at the manufacturer's discretion
unless otherwise agreed upon.
Rev_No
: 1,0
Issue Date:
Revision Date:
01-06-1998
08-06-2005
Prepared by:
Approved by:
AsK
ESJ
Page 2 of 3
MAT 1100
MCGB - DATA SHEET FOR SUPPLIERS
Revisions:
Rev. No.
Rev. Date
Change
Responsible
0,70
31-01-2002
AnJo
0,80
12-03-2003
0,90
0,91
1,0
15-01-2004
31-01-2005
08-06-2005
Text editions
Prepared & Approved changed
References to Alternative Standards added to supplier version.
Welding electrode number changed by adding 9000. Welding electrodes are
transferred to Purchase Parts.
Standards updated.
Standards updated. ASTM A 668/ASTM A 668M material class changed to C
Rev. no. changed to 1,0
Rev_No
: 1,0
Issue Date:
Revision Date:
01-06-1998
08-06-2005
Prepared by:
Approved by:
AsK
ESJ
AsK
AsK
AsK
AsK
Page 3 of 3
MAT 1105
MCGB - DATA SHEET FOR SUPPLIERS
PROPERTIES:
Carbon steel in hot rolled and normalised or similar condition: shape, plate, tube, bar and forging of
structural quality in killed condition.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchase Order the
data from the Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchase Order or a FLS Instruction
always overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the suppliers
documentation covers at least the documentation required in the Primary Listed Standard. This means that
supplementary tests in some cases will be necessary.
Primary Standard:
CHEMICAL COMPOSITION:
% C max or
range
Dim. mm
% Si max or
range
% Mn max or
range
% P max or
range
% S max or
range
0.03
0.03
0.17-0.25
% N max or
range
% Al min or
range
Yield Strength
MPa
Elong.
%
Rm
Re
A5
HRc
HB
HV
360-510
235 -
21 -
206
-20
27
Annealed 16-40
340-470
225 -
26 -
206
-20
27
Annealed 40-63
340-470
215 -
25 -
206
-20
27
Annealed 63-100
340-470
215 -
24 -
206
-20
27
Annealed 100-150
340-470
195 -
22 -
206
-20
27
Annealed 150-200
320-470
185 -
21 -
206
-20
27
Annealed 200-250
320-470
175 -
21 -
206
-20
27
Condition
Annealed
Dim.
mm
0-3
Area Reduction
M.Elas
GPa
Imp. Energy
KV, Min
Hardness
Structural steel tested for Impact Energy at -20 C. For materials supplied according to alternative ASTM standards the
impact energy measured according to ASTM A 662/A 662 M (1997) shall be minimum 27 J at a testing temperature of -20 C.
Rev_No
1,0
Issue Date:
Revision Date:
19-12-2003
08-06-2005
Prepared by:
Approved by:
AsK
ESJ
Page 1 of 3