Documente Academic
Documente Profesional
Documente Cultură
2011
Implants
Instruments
Sets
1-1
5/11
1-2
Plates
and Screws
60.111.000
Modular Mini Fragment LCP Graphic Case, for common instruments and modules
311.01
311.43
312.20
319.006
319.01
319.39
323.201
323.202
323.26
329.12
347.985
391.82
391.962
392.00
398.40
398.41
398.819
398.95
399.18
399.19
399.48
399.481
399.97
Instruments
Handle, with mini quick coupling
Handle, with quick coupling
2.0 mm Parallel Drill Guide and Drill Sleeve
Depth Gauge, for 2.0 mm and 2.4 mm Cortex Screws
Depth Gauge, for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws
Sharp Hook
2.0 mm Universal Drill Guide
2.4 mm Universal Drill Guide
2.7 mm Universal Drill Guide
Bending Pliers, 140 mm, for 1.5 mm and 2.0 mm plates, 2 ea.
Screw and Plate Holding Forceps
Wire-Bending Pliers, 160 mm
Bending/Cutting Pliers
Bending Iron, for 1.25 mm, 1.6 mm, 2.0 mm Kirschner Wires
Reduction Forceps with points, narrow, ratchet, 132 mm length
Reduction Forceps with Points, broad, Ratchet, 132 mm
Plate Holding Forceps with swivel foot, 150 mm
Termite Forceps, 90 mm length
Hohmann Retractor, 6 mm width, small, short narrow tip, 160 mm length
Hohmann Retractor, 8 mm width, small, short narrow tip, 160 mm length
Periosteal Elevator, 3 mm width, curved blade, straight edge
Periosteal Elevator, 3 mm, curved blade, round edge
Reduction Forceps, with points, 130 mm length, ratchet
5/11
1-3
60.114.001
03.114.001
03.114.002
03.114.003
03.114.007
03.114.009
306.667.96
310.141
310.971
02.114.002
02.114.004
02.114.003
04.114.002
04.114.004
Plates
and Screws
01.114.001 1.5 mm LCP Modular Mini Fragment Instrument and Implant Set
01.114.002 1.5 mm Titanium LCP Modular Mini Fragment Instrument and Implant Set
04.114.003
04.114.006
02.114.009
02.114.010
04.114.009
04.114.010
02.114.013
04.114.013
02.114.005
02.114.006
02.114.007
02.114.014
04.114.005
04.114.007
04.114.014
Also available: 1.5 mm LCP Modular Mini Fragment Instrument and Implant Sets with Drill Guides (01.114.001 and 01.114.002)
Illustrations not actual size
R
5/11
1-4
Plates
and Screws
2.0 mm LCP Modular Mini Fragment Instrument and Implant Module Sets
01.111.121 2.0 mm LCP Modular Mini Fragment Instrument and Implant Module Set
01.111.141 2.0 mm Titanium LCP Modular Mini Fragment Instrument and Implant Module Set
60.111.001
310.201
310.507
310.972
313.843
323.034
329.921
Instruments
2.0 mm Drill Bit, mini quick coupling, 65 mm, 2 ea.
1.5 mm Drill Bit with Depth Mark, mini quick coupling, 96 mm, 2 ea.
Countersink, for 2.0 mm/2.4 mm screws
2.0 mm Screwdriver Blade, self-retaining, StarDrive, long, 2 ea.
1.5 mm Threaded Drill Guide, with Depth Gauge, 2 ea.
Threaded Bending Pin, for 2.0 mm LCP Plates, 2 ea.
201.876
201.900
401.876
401.900
201.356.97
201.382.97
401.356.97
401.382.97
247.344
247.360
447.344
447.360
247.349
447.349
2.0 mm LCP Condylar Plate, 7 holes shaft,
54 mm
2.0 mm LCP Adaption Plate, 12 holes, 81 mm 447.362
2.0 mm LCP T-Plate, 3 holes head, 7 holes
447.615
shaft, 53 mm
247.362
247.615
5/11
1-5
2.4 mm LCP Modular Mini Fragment Instrument and Implant Module Sets
60.111.002
310.509
310.530
310.972
314.467
323.029
329.922
Instruments
1.8 mm Drill Bit with Depth Mark, quick coupling, 110 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.0 mm/2.4 mm screws
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
1.8 mm Threaded LCP Drill Guide, with Depth Gauge, 2 ea.
Bending Pin, for 2.4 mm and 2.7 mm Locking Plates, 2 ea.
212.806
212.830
412.806
412.830
201.756
201.790
401.756
401.790
249.674
247.364
449.674
447.364
249.679
249.679
2.4 mm LCP Condylar Plate, 7 holes shaft,
59 mm
2.4 mm LCP Adaption Plate, 12 holes, 88 mm 247.366
2.4 mm LCP T-Plate, 3 holes head,
249.615
7 holes shaft, 58 mm
247.366
249.615
Plates
and Screws
01.111.122 2.4 mm LCP Modular Mini Fragment Instrument and Implant Module Set
01.111.142 2.4 mm Titanium LCP Modular Mini Fragment Instrument and Implant Module Set
5/11
1-6
Plates
and Screws
2.7 mm LCP Modular Mini Fragment Instrument and Implant Module Sets
01.111.123 2.7 mm LCP Modular Mini Fragment Instrument and Implant Module Set
01.111.143 2.7 mm Titanium LCP Modular Mini Fragment Instrument and Implant Module Set
60.111.003
310.26
310.87
314.467
323.061
323.062
329.922
Instruments
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.7 mm Cortex Screws
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
2.0 mm Threaded Drill Guide, with Depth Gauge, 2 ea.
2.0 mm Drill Bit with Depth Mark, quick coupling, 140 mm, 2 ea.
Bending Pin, for 2.4 mm and 2.7 mm Locking Plates, 2 ea.
202.210
212.830
402.210
412.830
202.870
202.969
402.870
402.969
249.680
247.374
449.680
447.374
249.689
249.688
249.687
249.686
249.684
247.370
249.685
5/11
1-7
305.575
Mini Fragment Instrument and Implant Set Graphic Case, for self-tapping screws
310.11
310.15
310.19
310.26
310.87
310.88
310.95
311.15
311.19
311.26
311.43
312.14
312.20
312.22
312.24
314.03
314.06
314.67.97
319.04
319.11
319.39
319.97
329.01
329.12
391.97
398.99
399.00
399.18
399.19
399.45
399.48
399.97
Instruments
1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.
1.5 mm Drill Bit, quick coupling, 85 mm, 2 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.7 mm Cortex Screws
Countersink, for 1.5 mm and 2.0 mm Cortex Screws
Handle, with mini quick coupling, stainless steel
Tap for 1.5 mm Cortex Screws, 50 mm, 2 ea.
Tap for 2.0 mm Cortex Screws, 54 mm, 2 ea.
Tap for 2.7 mm Cortex Screws, 100 mm, 2 ea.
Handle, with quick coupling
1.5 mm/1.1 mm Double Drill Sleeve
2.0 mm Parallel Drill Guide and Drill Sleeve
2.0 mm/1.5 mm Double Drill Sleeve
2.7 mm/2.0 mm Double Drill Sleeve
Small Hexagonal Screwdriver Shaft
Holding Sleeve, for Small Hexagonal Screwdriver Shaft
Cruciform Screwdriver Shaft with Holding Sleeve
Depth Gauge, for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws
Depth Gauge, for 1.5 mm and 2.0 mm Cortex Screws
Sharp Hook
Screw Forceps
Bending Iron, for 1.5 mm and 2.0 mm plates
Bending Pliers, for 1.5 mm and 2.0 mm plates
Wire Cutter, 175 mm length
Holding Forceps, for small plates, 135 mm length
Holding Forceps, with foot, for mini plates, 135 mm length
Hohmann Retractor, 6 mm width
Hohmann Retractor, 8 mm width
Hohmann Retractor, with broad shank, 2 ea.
Periosteal Elevator, 3 mm width, curved blade, straight edge
Reduction Forceps with points, 130 mm length, ratchet
Plates
and Screws
5/11
1-8
Plates
and Screws
Implants
1.5 mm Cortex Screws, self-tapping
4 ea.: 6, 7, 8, 9, 10, 11, 12, 14 and 16 mm
201.806
201.820
202.806
202.824
219.98
242.03
242.08
242.33
242.34
242.41
243.13
243.15
243.33
243.34
243.41
292.06
292.16
5/11
1-9
305.565
Mini Fragment Instrument and Titanium Implant Set Graphic Case, for self-tapping screws
310.11
310.15
310.19
310.26
310.87
310.88
311.01
311.15
311.19
311.26
311.43
312.14
312.22
312.24
314.02
314.03
314.67.97
319.04
319.11
319.39
319.97
329.12
391.82
391.95
391.97
392.02
398.40
398.41
398.96
399.18
399.19
399.48
Instruments
1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.
1.5 mm Drill Bit, quick coupling, 85 mm, 2 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.7 mm Cortex Screws
Countersink, for 1.5 mm and 2.0 mm Cortex Screws
Handle, with mini quick coupling
Tap for 1.5 mm Cortex Screws, 50 mm, 2 ea.
Tap for 2.0 mm Cortex Screws, 54 mm, 2 ea.
Tap for 2.7 mm Cortex Screws, 100 mm, 2 ea.
Handle, with quick coupling
1.5 mm/1.1 mm Double Drill Sleeve
2.0 mm/1.5 mm Double Drill Sleeve
2.7 mm/2.0 mm Double Drill Sleeve
Small Hexagonal Screwdriver with Holding Sleeve
Small Hexagonal Screwdriver Shaft
Cruciform Screwdriver Shaft with Holding Sleeve
Depth Gauge, for 2.7 mm and 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Depth Gauge, for 1.5 mm and 2.0 mm Cortex Screws
Sharp Hook
Screw Forceps
Bending Pliers, for 1.5 mm and 2.0 mm plates, 2 ea.
Wire-Bending Pliers, 160 mm length
Plate-Cutting Forceps, for 1.5 mm2.7 mm plates
Wire Cutter, 175 mm length
Bending Iron, for 0.8 mm1.25 mm Kirschner wires
Reduction Forceps with points, narrow
Reduction Forceps with points, broad
Stagbeetle Forceps, 125 mm length
Hohmann Retractor, 6 mm width
Hohmann Retractor, 8 mm width
Periosteal Elevator, 3 mm width, curved blade, straight edge
Plates
and Screws
5/11
1-10
Plates
and Screws
Implants
0.6 mm Precut Cerclage Wire, 175 mm length (10/pkg.), 1 pkg.
0.8 mm Precut Cerclage Wire, 200 mm length (10/pkg.), 1 pkg.
0.8 mm Kirschner Wire, 70 mm length, trocar point (10/pkg.), 1 pkg.
1.0 mm Kirschner Wire, 150 mm length, trocar point (10/pkg.), 1 pkg.
1.25 mm Kirschner Wire, 150 mm length, trocar point (10/pkg.), 1 pkg.
400.806
400.820
401.806
401.824
402.806
402.824
419.98
446.19
446.23
446.24
446.63
446.64
443.19
443.23
443.24
443.61
443.62
442.04
442.06
442.33
442.34
442.41
442.61
442.62
Also available: Mini Fragment Instrument and Titanium Implant Set (125.48)
With Graphic Case (305.505) and Titanium Cortex Screws (not self-tapping):
1.5 mm (400.0xx), 2.0 mm (401.0xx) and 2.7 mm (402.0xx)
Mini Fragment Instrument and Implant Sets (125.48J) and (125.488J)
With standard drill bits 310.10, 310.14, 310.20 and 310.27 to fit Jacobs chuck
Screw Rack with self-tapping screws, for Mini Fragment Instrument
and Titanium Implant Set (125.489)
5/11
1-11
305.108
310.215
310.803
311.43
312.145
314.466
314.467
319.289
319.293
319.703
347.985
Instruments
1.7 mm Cannulated Drill Bit, quick coupling, 100 mm, 2 ea.
Cannulated Countersink, for 2.4 mm cannulated screws
Handle with quick coupling, small
1.7 mm/0.8 mm Double Drill Sleeve
Cannulated StarDrive Screwdriver Shaft, T8, 2 ea.
StarDrive Screwdriver Shaft, 105 mm
1.0 mm Cleaning Brush
0.8 mm Cleaning Stylet
Measuring Device, for 2.4 mm Cannulated Screws
Screw and Plate Holding Forceps
211.810
211.830
Implants
2.4 mm Cannulated Screws, long thread
4 ea.: 10, 11, 12, 13, 14, 15 and 16 mm
2 ea.: 17, 18, 19, 20, 22, 24, 26, 28 and 30 mm
211.841
211.849
292.619
Plates
and Screws
5/11
1-12
Plates
and Screws
60.226.022
292.622
292.623
03.226.000
03.226.002
03.226.003
03.226.004
03.226.005
03.226.006
03.226.016
310.221
311.43
312.151
314.467
319.291
319.292
319.97
398.408
398.409
Instruments
1.1 mm Threaded Guide Wire, 150 mm, 10 ea.
1.1 mm Nonthreaded Guide Wire, 150 mm, 10 ea.
Compression Sleeve for 3.0 mm Headless Compression Screw
Measuring Device
4.8 mm Cannulated Trapezium Drill
Cannulated StarDrive Screwdriver Shaft, T8, 2 ea.
4.8 mm Trapezium Drill Sleeve
Compression Sleeve Handle
Compression Sleeve for 2.4 mm Headless Compression Screw
2.0 mm Cannulated Drill Bit, quick coupling, 150 mm, 2 ea.
Handle, with quick coupling
2.0 mm/1.1 mm Double Drill Sleeve
StarDrive Screwdriver Shaft, T8
1.25 mm Cleaning Brush
1.1 mm Cleaning Stylet
Screw Forceps
Freer Elevator
Scaphoid Elevator
Also Available: 2.4 mm and 3.0 mm Headless Compression Screw Instrument and Implant Set (01.226.032) which consists of
instrument set (01.226.022) and 2.4 mm and 3.0 mm implant sets (01.226.042 and 01.226.062)
2.4 mm and 3.0 mm Headless Compression Screw Instrument and Titanium Implant Set (01.226.034) which
consists of instrument set (01.226.022) and 2.4 mm and 3.0 mm titanium implant sets (01.226.044 and
01.226.064)
5/11
1-13
60.226.024
02.226.209
02.226.240
02.226.317
02.226.340
04.226.209
04.226.240
04.226.317
04.226.340
Plates
and Screws
Also Available: Compression Sleeve for 2.4 mm Headless Compression Screw (03.266.016)
5/11
1-14
Plates
and Screws
60.226.006
02.226.010
02.226.040
02.226.116
02.226.140
04.226.010
042.226.040
04.226.116
04.226.140
5/11
1-15
60.226.002
03.226.000
03.226.002
03.226.003
03.226.004
03.226.005
03.226.006
292.622
292.623
310.221
311.43
312.151
314.467
319.97
319.292
319.291
398.408
398.409
Instruments
Compression Sleeve
Measuring Device
4.8 mm Cannulated Trapezium Drill
Cannulated StarDrive Screwdriver Shaft, T8, 2 ea.
4.8 mm Trapezium Drill Sleeve
Compression Sleeve Handle
1.1 mm Threaded Guide Wire, 150 mm, 10 ea.
1.1 mm Non-Threaded Guide Wire, 150 mm, 10 ea.
2.0 mm Cannulated Drill Bit, quick coupling, 150 mm, 2 ea.
Handle, with quick coupling
2.0 mm/1.1 mm Double Drill Sleeve
StarDrive Screwdriver Shaft, T8
Screw Forceps
1.1 mm Cleaning Stylet
1.25 mm Cleaning Brush
Freer Elevator
Scaphoid Elevator
02.226.010
02.226.040
02.226.116
02.226.140
04.226.010
02.226.040
04.226.116
02.226.140
Plates
and Screws
5/11
1-16
Plates
and Screws
60.110.040
310.16
310.972
311.03.96
313.843
323.201
Instruments
1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink, for 2.0 mm and 2.4 mm screws
Handle, with mini quick coupling, small
2.0 mm Screwdriver Blade, self-retaining, StarDrive, long
2.0 mm Universal Drill Guide
201.360.97
201.375.97
241.680
241.681
241.682
241.683
241.684
241.685
241.690
241.691
241.692
401.360.97
401.375.97
441.680
441.681
441.682
441.683
441.684
441.685
441.690
441.691
441.692
5/11
1-17
2.4 mm Variable Angle LCP Distal Radius System Instrument and Implant Sets
60.110.070
03.110.000
03.110.002
03.110.005
314.467
02.110.201
02.110.202
02.110.203
02.110.204
02.110.205
02.110.206
02.110.207
02.110.208
02.210.108
02.210.130
04.110.201
04.110.202
04.110.203
04.110.204
04.110.205
04.110.206
04.110.207
04.110.208
04.210.108
04.210.130
5/11
Plates
and Screws
01.110.070 2.4 mm Variable Angle LCP Distal Radius System Instrument and Implant Set
01.110.071 2.4 mm Titanium Variable Angle LCP Distal Radius System Instrument and Implant Set
1-18
Plates
and Screws
2.4 mm Variable Angle LCP (VA-LCP) Two-Column Volar Distal Radius Plate Sets
01.111.461 2.4 mm Variable Angle LCP (VA-LCP) Two-Column Volar Distal Radius Plate Set
01.111.462 2.4 mm Titanium Variable Angle LCP (VA-LCP) Two-Column Volar Distal Radius Plate Set
60.111.461
Module for 2.4 mm Variable Angle LCP Two-Column Volar Distal Radius Plate
02.111.620
02.111.630
02.111.640
02.111.650
02.111.720
02.111.730
02.111.740
02.111.750
02.111.621
02.111.631
02.111.641
02.111.651
02.111.721
02.111.731
02.111.741
02.111.751
04.111.620
04.111.630
04.111.640
04.111.650
04.111.720
04.111.730
04.111.740
04.111.750
04.111.621
04.111.631
04.111.641
04.111.651
04.111.721
04.111.731
04.111.741
04.111.751
2.4 mm Titanium Variable Angle LCP TwoColumn Volar Distal Radius Plates, left
6 head holes, 2 shaft holes, 45 mm
6 head holes, 3 shaft holes, 54 mm
6 head holes, 4 shaft holes, 66 mm
6 head holes, 5 shaft holes, 75 mm
7 head holes, 2 shaft holes, 47 mm
7 head holes, 3 shaft holes, 55 mm
7 head holes, 4 shaft holes, 68 mm
7 head holes, 5 shaft holes, 77 mm
5/11
1-19
60.110.037
60.110.039
60.110.041
60.110.042
60.110.049
02.110.300
03.110.006
03.110.007
Instruments
1.8 mm Kirschner Wire with Trocar Point, 150 mm
Direct Measuring Device, for 1.8 mm Kirschner Wire
StarDrive Screwdriver, T8
03.110.011
03.110.016
03.110.017
03.110.018
03.110.019
03.110.020
03.110.021
03.110.022
Measuring Device, for use with 1.8 mm Threaded Drill Guide, 2 ea.
1.8 mm Drill Guide with Measuring for Guide Block, 2 ea.
StarDrive Screwdriver Shaft, T8 with Hexagonal Coupling, for Ratcheting Handle, 2 ea.
03.110.026*
03.110.027*
03.110.028*
03.110.029*
292.12
292.16
310.19
310.26
310.509
310.530
Plates
and Screws
5/11
1-20
Plates
and Screws
Instruments (contd.)
Ratcheting Screwdriver Handle
Handle, with quick coupling
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Holding Sleeve, for StarDrive Screwdriver Shaft, T8
Depth Gauge, for 2.0 mm and 2.4 mm Cortex Screws, measures up to 50 mm
Depth Gauge, for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws, measures up to 60 mm
Sharp Hook
Threaded LCP Drill Guide, 2 ea.
1.8 mm Threaded Drill Guide, short, 3 ea.
2.4 mm Universal Drill Guide
2.7 mm Universal Drill Guide
1.25 mm K-wire Insert
Bending Pliers, 140 mm, for 1.5 mm and 2.0 mm plates, 2 ea.
Bending Pin for 2.4 mm Locking Plates, 2 ea.
Reduction Forceps with Points, broad, ratchet, 132 mm
Termite Forceps, 90 mm length
Hohmann Retractor, 6 mm width, small, short narrow top, 160 mm length, 2 ea.
Periosteal Elevator, 3 mm width, curved blade, straight edge
Periosteal Elevator, 3 mm width, curved blade, round edge
Reduction Forceps, with points, 130 mm length, ratchet
02.110.730*
02.110.731*
02.110.740*
02.110.741*
02.110.750*
02.110.751*
02.110.830*
02.110.831*
02.110.840*
02.110.841*
02.110.850*
02.110.851*
02.110.430
02.110.431
02.110.440
02.110.441
02.110.450
02.110.451
02.110.330
02.110.331
02.110.340
02.110.341
02.110.350
02.110.351
200.190
200.199
201.756
201.780
202.870
202.890
212.806
212.830
242.458
242.459
242.461
242.462
242.464
242.465
242.467
242.468
5/11
1-21
242.479
242.490
242.491
242.492
242.493
242.494
242.504
242.505
242.506
242.507
242.508
242.509
242.511
242.512
402.870
402.890
04.110.730*
04.110.731*
04.110.740*
04.110.741*
04.110.750*
04.110.751*
04.110.830*
04.110.831*
04.110.840*
04.110.841*
04.110.850*
04.110.851*
04.110.430
04.110.431
04.110.440
04.110.441
04.110.450
04.110.451
04.110.330
04.110.331
04.110.340
04.110.341
04.110.350
04.110.351
400.190
400.199
242.477
242.478
401.756
401.780
242.500
242.501
242.502
242.503
412.806
412.830
Plates
and Screws
442.458TM
442.459TM
442.461TM
442.462TM
442.464TM
442.465TM
442.467TM
442.468TM
442.477
442.478
442.479
442.490
442.491
442.492
442.493
442.494
5/11
1-22
Plates
and Screws
442.500
442.501
442.502
442.503
442.504
442.505
442.506
442.507
442.508
442.509
442.511
442.512
Also available: 2.4 mm LCP Volar Column Distal Radius Plate Sets, 6 & 7 Hole Head plates (01.110.049 and 01.110.048),
which includes all the instruments and implants marked above with an asterisk with Implant Module for
2.4 mm LCP Volar Column Distal Radius Plate, with 6 hole or 7 hole head (60.110.049)
5/11
1-23
306.450
690.384
310.19
310.26
310.509
310.530
311.43
314.02
314.467
314.468
319.006
319.01
319.39
323.029
323.202
323.26
329.12
324.084
329.922
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Drill Bit with depth mark, quick coupling, 110 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Handle, with quick coupling
Small Hexagonal Screwdriver, with holding sleeve
StarDrive Screwdriver Shaft, T8, 105 mm
Holding Sleeve, for 314.467
Depth Gauge, for 2.0 mm and 2.4 mm screws
Depth Gauge, for 2.7 mm screws
Sharp Hook
Threaded LCP Drill Guide, 1.8 mm, 2 ea.
2.4 mm Universal Drill Guide
2.7 mm Universal Drill Guide
Bending Pliers, 2 ea.
1.25 mm K-Wire Insert, for 323.029
Bending Pin, 2 ea.
398.41
398.95
399.18
399.48
399.481
399.97
Plates
and Screws
105.515 2.4 mm LCP Distal Radius Plate Instrument and Implant Set
145.515 2.4 mm Titanium LCP Distal Radius Plate Instrument and Implant Set
5/11
1-24
Plates
and Screws
Titanium Implants
in set 145.515
201.756
201.780
212.806
212.830
202.810
202.830
401.756
401.780
412.806
412.830
402.810
402.830
242.458
242.459
242.461
242.462
242.464
242.465
242.467
242.468
442.458TM
442.459TM
442.461TM
442.462TM
442.464TM
442.465TM
442.467TM
442.468TM
242.477
242.478
442.477
442.478
242.479
242.490
442.479
442.490
242.491
242.492
242.493
242.494
442.491
442.492
442.493
442.494
242.500
242.501
242.502
242.503
442.500
442.501
442.502
442.503
242.504
242.505
242.506
242.507
242.508
242.509
242.511
242.512
442.504
442.505
442.506
442.507
442.508
442.509
442.511
442.512
292.12
292.16
492.12
492.16
Also available: LCP Distal Radius Plate Implant Module (304.206) and Lid (304.206.11), and
Screw Rack (690.384.40) and Lid (690.384.41)
Illustrations not actual size
5/11
1-25
2.4 mm LCP Volar Distal Radius Plate Instrument and Implant Sets
60.110.030
Graphic Case, for 2.4 mm LCP Volar Distal Radius Instrument and Implant Set
310.509
311.43
314.467
314.468
319.006
323.035
323.202
329.922
Instruments
1.8 mm Drill Bit with depth mark, quick coupling, 110 mm, 2 ea.
Handle, with quick coupling
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Holding Sleeve, for 314.467
Depth Gauge, for 2.0 mm and 2.4 mm screws
1.8 mm Threaded Drill Guide, short, 3 pkgs. of 5
2.4 mm Universal Drill Guide
Bending Pin, for 2.4 mm Locking Plates, 2 ea.
201.760
201.774
212.810
212.824
401.760
401.774
412.810
412.824
242.458
242.459
242.461
242.462
242.464
242.465
242.467
242.468
442.458TM
442.459TM
442.461TM
442.462TM
442.464TM
442.465TM
442.467TM
442.468TM
242.479
242.490
442.479
442.490
292.12
Plates
and Screws
01.110.031 2.4 mm LCP Volar Distal Radius Plate Instrument and Implant Set
01.110.032 2.4 mm Titanium LCP Volar Distal Radius Plate Instrument and Implant Set
5/11
1-26
Plates
and Screws
60.110.039
02.110.330
02.110.331
02.110.340
02.110.341
02.110.350
02.110.351
02.110.430
02.110.431
02.110.440
02.110.441
02.110.450
02.110.451
04.110.330
04.110.331
04.110.340
04.110.341
04.110.350
04.110.351
04.110.430
04.110.431
04.110.440
04.110.441
04.110.450
04.110.451
5/11
1-27
60.110.032
02.110.005
02.110.007
02.110.009
02.110.011
02.110.105
02.110.107
02.110.109
02.110.111
Implants in 01.110.025
LCP Dia-Meta Volar Distal Radius Plates
5 holes shaft, right
7 holes shaft, right
9 holes shaft, right
11 holes shaft, right
5 holes shaft, left
7 holes shaft, left
9 holes shaft, left
11 holes shaft, left
04.110.005
04.110.007
04.110.009
04.110.011
04.110.105
04.110.107
04.110.109
04.110.111
Plates
and Screws
Implants in 01.110.026
Titanium LCP Dia-Meta Volar Distal Radius Plates
5 holes shaft, right
7 holes shaft, right
9 holes shaft, right
11 holes shaft, right
5 holes shaft, left
7 holes shaft, left
9 holes shaft, left
11 holes shaft, left
5/11
1-28
Plates
and Screws
690.343
690.342
Distal Radius Plate Set Graphic Case (includes implant modulefor set 105.505)
Titanium Distal Radius Plate Set Graphic Case (includes implant modulefor set 145.505)
310.19
310.26
310.510
310.530
311.01
312.181
312.92
314.02
314.67.97
319.006
319.06
323.26
329.09
329.598
329.599
391.962
391.963
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Handle, with mini quick coupling
2.4 mm /1.8 mm Drill Guide
1.8 mm Threaded Drill Guide, 4 ea.
Small Hexagonal Screwdriver with Holding Sleeve
Cruciform Screwdriver Shaft with Holding Sleeve
Depth Gauge
Depth Gauge
2.7 mm Universal Drill Guide
Bending Iron, for Distal Radius Plates, 4 ea.
Bending Template, for Volar Distal Radius Plates
Bending Template, for Dorsal Distal Radius Plates, 2 ea.
Bending/Cutting Pliers
Universal Bending Pliers, 2 ea.
201.612
201.630
201.962
201.980
202.810
202.826
242.472
242.473
242.482
242.483
292.12
292.16
401.612
401.630
401.962
401.980
402.810
402.826
442.472
442.473
442.482
442.483
492.12
492.16
5/11
1-29
2.4 mm Variable Angle LCP (VA-LCP) Narrow Two-Column Volar Distal Radius Plate Sets
60.111.465
Implant Module for 2.4 mm VA-LCP Two-Column Volar Distal Radius Plate, Narrow
02.111.520
02.111.530
02.111.540
02.111.550
02.111.521
02.111.531
02.111.541
02.111.551
Plates
and Screws
01.111.480 2.4 mm Variable Angle LCP (VA-LCP) Narrow Two-Column Volar Distal Radius Plate Set
01.111.481 2.4 mm Titanium Variable Angle LCP (VA-LCP) Narrow Two-Column Volar Distal Radius Plate Set
04.111.520
04.111.530
04.111.540
04.111.550
04.111.521
04.111.531
04.111.541
04.111.551
5/11
1-30
Plates
and Screws
2.4 mm Variable Angle LCP (VA-LCP) Extra-Articular Distal Radius Plate Set
01.111.482 2.4 mm Variable Angle LCP (VA-LCP) Extra-Articular Distal Radius Plate Set
01.111.483 2.4 mm Titanium Variable Angle LCP (VA-LCP) Extra-Articular Distal Radius Plate Set
60.111.467
02.110.201
02.110.202
02.110.205
02.110.206
02.110.203
02.110.204
02.110.207
02.110.208
04.110.201
04.110.202
04.110.205
04.110.206
04.110.203
04.110.204
04.110.207
04.110.208
5/11
1-31
Screw Set for 2.4 mm Variable Angle LCP (VA-LCP) Distal Radius System
60.111.469
02.210.078
02.210.100
02.210.108
02.210.130
Plates
and Screws
01.111.486 Screw Set for 2.4 mm Variable Angle LCP (VA-LCP) Distal Radius System
01.111.487 Titanium Screw Set for 2.4 mm Variable Angle LCP (VA-LCP) Distal Radius System
Screw Rack for 2.4 mm Variable Angle LCP (VA-LCP) Distal RadiusSystem Graphic Case
Implants (in set 01.111.486)
1.8 mm Variable Angle Locking Buttress Pins,
with T8 StarDrive recess
3 ea.: 8 mm14 mm (2 mm increments),
28 mm and 30 mm
6 ea.: 16 mm26 mm (2 mm increments)
2.4 mm Variable Angle Locking Screws,
with T8 StarDrive recess
5 ea.: 8 mm12 mm (2 mm increments),
28 mm and 30 mm
10 ea.: 14 mm, 16 mm, 24 mm and 26 mm
15 ea.: 18 mm, 20 mm and 22 mm
04.210.078
04.210.100
04.210.108
04.210.130
201.756
201.780
401.756
401.780
202.870
202.890
402.870
402.890
5/11
1-32
Plates
and Screws
60.116.001
60.111.471
60.111.472
60.111.473
Graphic Case, Full Length, 4 bay for Modular Graphic Case System
2/3 Instrument Tray for LCP and VA-LCP Distal Radius Systems
1/3 Instrument Tray for Distal Radius, Forceps and Bending Pliers
1/3 Instrument Tray for Distal Radius, Retractors, Hook and Elevators
02.111.500.10
02.111.501.10
Instruments
1.25 mm Plate Reduction Wire, threaded tip with small stop, 150 mm, 1 pkg.of 10 ea.
1.25 mm Plate Reduction Wire, threaded tip with large stop, 150 mm, 1 pkg.of 10 ea.
03.110.000
03.110.005
03.110.007
03.110.021
03.110.023
03.110.024
03.111.005
03.111.007
310.19
310.26
310.509
310.530
311.43
314.453
314.467
314.468
319.39
323.029
323.202
323.26
324.084
329.12
329.922
398.41
398.95
399.18
399.19
399.48
399.481
399.97
511.776
5/11
1-33
02.110.300
292.12
292.16
01.111.461*
01.111.480*
01.111.482*
01.111.486*
Plates
and Screws
01.111.478 2.4 mm Variable Angle LCP (VA-LCP) Distal Radius System continued
01.111.479 2.4 mm Titanium Variable Angle LCP (VA-LCP) Distal Radius System
Included in set 01.111.479
2.4 mm Variable Angle LCP (VA-LCP)
Two-Column Volar Distal Radius Plate Set
2.4 mm Variable Angle LCP (VA-LCP) Narrow
Two-Column Volar Distal Radius Plate Set
2.4 mm Variable Angle LCP (VA-LCP)
Extra-Articular Distal Radius Plate Set
Screw Set for 2.4 mm Variable Angle LCP
(VA-LCP) Distal Radius System
1.8 mm Kirschner Wire, 150 mm, Trocar point,
1 pkg. of 10 ea.
1.25 mm Kirschner Wire, 150 mm, Trocar
point, 1 pkg. of 10 ea.
1.6 mm Kirschner Wire, 150 mm, Trocar point,
1 pkg. of 10 ea.
5/11
1-34
Plates
and Screws
2/3 Instrument Tray for LCP and VA-LCP Distal Radius Systems
01.111.500 2/3 Instrument Tray for LCP and VA-LCP Distal Radius Systems
01.111.501 2/3 Titanium Instrument Tray for LCP and VA-LCP Distal Radius Systems
60.111.471
60.111.474
2/3 Instrument Tray for LCP and VA-LCP Distal Radius Systems
1.8 mm Short Threaded Drill Guide and Depth Gauge Module
Instruments
02.111.500.10 1.25 mm Plate Reduction Wire, threaded tip with small stop, 150 mm, 1 pkg.of 10 ea.
02.111.501.10 1.25 mm Plate Reduction Wire, threaded tip with large stop, 150 mm, 1 pkg.of 10 ea.
03.110.000
03.110.005
03.110.006
03.110.007
03.110.020
03.110.021
03.110.023
03.110.024
03.111.005
310.19
310.26
310.509
310.530
311.43
314.453
314.467
314.468
323.029
323.035
323.202
323.26
324.084
329.922
511.776
02.110.300
292.12
292.16
5/11
1-35
2.4 mm and 2.7 mm Variable Angle Locking Screw Modules for Distal Radius
60.116.050
60.116.058
60.116.306
60.116.330
60.116.451
60.116.503
60.116.507
60.116.513
60.116.521
60.116.554
60.116.555
02.210.078
02.210.098
02.210.108
02.210.128
04.210.078
04.210.098
04.210.108
04.210.128
201.756
201.778
401.756
401.778
202.870
202.888
402.870
402.888
Also available: 2.4 mm and 2.7 mm LCP and Variable Angle Locking Screw Module for Distal Radius (01.111.506),
which includes components from sets 01.111.502 and 01.111.504
2.4 mm and 2.7 mm Titanium LCP and Variable Angle Locking Screw Module for Distal Radius (01.111.507),
which includes components from sets 01.111.503 and 01.111.505
See individual set pages for configurations.
5/11
Plates
and Screws
01.111.502 2.4 mm and 2.7 mm Variable Angle Locking Screw Module for Distal Radius
01.111.503 2.4 mm and 2.7 mm Titanium Variable Angle Locking Screw Module for Distal Radius
1-36
Plates
and Screws
60.116.050
60.116.058
60.116.306
60.116.330
60.116.451
60.116.503
60.116.507
60.116.513
60.116.521
60.116.554
60.116.555
200.190
200.198
400.190
400.198
201.756
201.778
401.756
401.778
202.870
202.888
402.870
402.888
212.808
212.828
412.808
412.828
Also available: 2.4 mm and 2.7 mm LCP and Variable Angle Locking Screw Module for Distal Radius (01.111.506),
which includes components from sets 01.111.502 and 01.111.504
2.4 mm and 2.7 mm Titanium LCP and Variable Angle Locking Screw Module for Distal Radius (01.111.507),
which includes components from sets 01.111.503 and 01.111.505
See individual set pages for configurations.
5/11
1-37
2.4 mm LCP and Variable Angle Locking Screw Modules for Distal Radius
2.4 mm LCP and Variable Angle Locking Screw Module for Distal Radius
2.4 mm Titanium LCP and Variable Angle Locking Screw Module for Distal Radius
Plates
and Screws
01.111.508
01.111.509
60.116.050
60.116.058
60.116.306
60.116.330
60.116.451
60.116.503
60.116.507
60.116.513
60.116.521
60.116.554
02.210.078
02.210.098
02.210.108
02.210.124
200.190
200.198
201.756
201.778
212.808
212.824
04.210.078
04.210.098
04.210.108
04.210.124
400.190
400.198
401.756
401.778
412.808
412.824
5/11
1-38
Plates
and Screws
60.111.478
60.111.479
60.111.480
60.116.052
60.116.203
Module Bin, Half Length, Half Height, for narrow 6-hole head two-column plates
Module Bin, Half Length, Half Height, for 6-hole head two-column plates
Module Bin, Half Length, Half Height, for 7-hole head two-column plates
Module Shell, for Plate Trays and Auxiliary Trays, for Modular Graphic Case System
Auxiliary Bin, 1/2 length, 1/2 height for Module Shell for Modular Graphic Case System
03.111.500
03.111.501
03.111.600
03.111.601
03.111.700
03.111.701
Instruments
Guide Blocks for Two-Column Plate
narrow, 6 hole head, right
narrow, 6 hole head, left
6 hole head, right
6 hole head, left
7 hole head, right
7 hole head, left
02.111.520
02.111.521
02.111.530
02.111.531
02.111.540
02.111.541
02.111.550
02.111.551
04.111.520
04.111.521
04.111.530
04.111.531
04.111.540
04.111.541
04.111.550
04.111.551
02.111.620
02.111.621
02.111.630
02.111.631
02.111.640
02.111.641
02.111.650
02.111.651
04.111.620
04.111.621
04.111.630
04.111.631
04.111.640
04.111.641
04.111.650
04.111.651
2.4 mm Titanium Variable Angle LCP TwoColumn Volar Distal Radius Plates
6 hole head, 2 hole shaft, right
6 hole head, 2 hole shaft, left
6 hole head, 3 hole shaft, right
6 hole head, 3 hole shaft, left
6 hole head, 4 hole shaft, right
6 hole head, 4 hole shaft, left
6 hole head, 5 hole shaft, right
6 hole head, 5 hole shaft, left
02.111.720
02.111.721
02.111.730
02.111.731
02.111.740
02.111.741
02.111.750
02.111.751
04.111.720
04.111.721
04.111.730
04.111.731
04.111.740
04.111.741
04.111.750
04.111.751
5/11
1-39
60.111.481
60.111.482
60.111.483
60.111.484
60.116.052
Module Bin, Half Length, Half Height, for 6-hole head volar column plates
Module Bin, Half Length, Half Height, for 7-hole head volar column plates
Module Bin, Half Length, Half Height, for 8-hole head volar column plates
Module Bin, Half Length, Half Height, for 9-hole head volar column plates
Module Shell, for Plate Trays and Auxiliary Trays, for Modular Graphic Case System
03.110.016
03.110.017
03.110.018
03.110.019
Instruments
Guide Blocks for Volar Column Plate
8 hole head, right
8 hole head, left
9 hole head, right
9 hole head, left
02.110.730
02.110.731
02.110.740
02.110.741
02.110.750
02.110.751
02.110.830
02.110.831
02.110.840
02.110.841
02.110.850
02.110.851
02.110.430
02.110.431
02.110.440
02.110.441
02.110.450
02.110.451
02.110.330
02.110.331
02.110.340
02.110.341
02.110.350
02.110.351
03.110.026
03.110.027
03.110.028
03.110.029
04.110.730
04.110.731
04.110.740
04.110.741
04.110.750
04.110.751
04.110.830
04.110.831
04.110.840
04.110.841
04.110.850
04.110.851
04.110.430
04.110.431
04.110.440
04.110.441
04.110.450
04.110.451
04.110.330
04.110.331
04.110.340
04.110.341
04.110.350
04.110.351
5/11
1-40
Plates
and Screws
60.111.479
60.111.480
60.111.482
60.111.483
60.116.052
Module Bin, Half Length, Half Height, for 6-hole head two-column plates
Module Bin, Half Length, Half Height, for 7-hole head two-column plates
Module Bin, Half Length, Half Height, for 7-hole head volar column plates
Module Bin, Half Length, Half Height, for 8-hole head volar columnplates
Module Shell, for Plate Trays and Auxiliary Trays, for Modular Graphic Case System
03.110.016
03.110.017
Instruments
Guide Blocks for Volar Column Plate
8 hole head, right
8 hole head, left
03.110.028
03.110.029
03.111.600
03.111.601
03.111.700
03.111.701
02.111.620
02.111.621
02.111.630
02.111.631
02.111.640
02.111.641
02.111.650
02.111.651
02.111.720
02.111.721
02.111.730
02.111.731
02.111.740
02.111.741
02.111.750
02.111.751
02.110.830
02.110.831
02.110.840
02.110.841
02.110.850
02.110.851
02.110.430
02.110.431
02.110.440
02.110.441
02.110.450
02.110.451
5/11
1-41
04.111.620
04.111.621
04.111.630
04.111.631
04.111.640
04.111.641
04.111.650
04.111.651
04.111.720
04.111.721
04.111.730
04.111.731
04.111.740
04.111.741
04.111.750
04.111.751
04.110.830
04.110.831
04.110.840
04.110.841
04.110.850
04.110.851
04.110.430
04.110.431
04.110.440
04.110.441
04.110.450
04.110.451
Plates
and Screws
01.111.514 2.4 mm Two-Column and Volar Column Plate Module with Bins continued
01.111.515 2.4 mm Titanium Two-Column and Volar Column Plate Module with Bins
5/11
1-42
Plates
and Screws
1/3 Instrument Tray for 2.4 mm Cortex and Variable Angle Locking Screws
01.116.020 1/3 Instrument Tray for 2.4 mm Cortex and Variable Angle
Locking Screws, for Modular Graphic Case System
60.116.020
Instrument Tray for 2.4 mm Cortex/Variable Angle Screws, 1/3 length, for Modular Graphic Case System
03.110.000
03.110.005
03.110.023
03.110.024
03.111.005
03.211.001
310.509
310.530
311.43
314.453
314.467
314.468
323.029
323.202
511.776
Instruments
1.8 mm Universal Variable Angle Locking Drill Guide
Handle for Torque Limiting Attachment
1.8 mm Variable Angle Locking Drill Guide, Cone
1.8 mm Variable Angle Locking Drill Guide, Coaxial
Depth Gauge for 2.0 mm, 2.4 mm and 2.7 mm Screws
2.4 mm/2.7 mm Variable Angle LCP Plate Holding Pins
1.8 mm Drill Bit with depth mark, quick coupling, 110 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Handle, with quick coupling
Short StarDrive Screwdriver Shaft, T8, self-holding, quick coupling, 55 mm, 2 ea.
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Holding Sleeve, for StarDrive Screwdriver Shaft T8 (314.467)
Threaded LCP Drill Guide, for LCP Distal Radius Plates, 1.8 mm, 2 ea.
2.4 mm Universal Drill Guide
Torque Limiting Attachment, 0.8 Nm, quick coupling
5/11
1-43
690.377
311.01
312.14
313.94.96
319.004
319.006
319.134
319.39
323.201
323.202
347.985
391.962
391.963
398.41
398.819
398.95
399.18
399.19
399.481
399.48
399.97
Instruments
Handle, with mini quick coupling
1.5 mm/1.1 mm Double Drill Sleeve
Cruciform Screwdriver with Holding Sleeve, for 2.4 mm screws
Depth Gauge, for 1.3 mm and 1.5 mm screws
Depth Gauge, for 2.0 mm and 2.4 mm screws
1.3 mm/1.0 mm Double Drill Sleeve
Sharp Hook
2.0 mm Universal Drill Guide
2.4 mm Universal Drill Guide
Screw and Plate Holding Forceps
Bending/Cutting Pliers
Universal Bending Pliers, 2 ea.
Reduction Forceps with points, broad, ratchet
Plate Holding Forceps, with swivel foot
Termite Forceps
Small Hohmann Retractor, 6 mm
Small Hohmann Retractor, 8 mm
Periosteal Elevator, 3 mm width, curved blade, round edge
Periosteal Elevator, 3 mm width, curved blade, straight edge
Reduction Forceps with points, 130 mm length, ratchet
Also available:
Plates
and Screws
Modular Hand System (105.200) consists of sets 105.201, 105,202, 105,203, 105,204 and 105.205
Titanium Modular Hand System (145.200) consists of sets 105.201, 145.202, 145,203, 145.204 and 145.205
5/11
1-44
Plates
and Screws
305.085
304.576
306.667.96
310.971
314.411.96
314.48.96
Instruments
Countersink, for 1.3 mm and 1.5 mm screws
Cruciform Screwdriver Blade with Holding Sleeve, for 1.3 mm screws
Cruciform Screwdriver Blade with Holding Sleeve, for 1.0 mm screws
316.286
316.288
316.290
316.292
316.294
316.396
316.402
200.526
200.534
400.526
400.534
200.686
200.698
400.686
400.698
221.306
221.312
221.320
221.321
221.333
221.334
221.335
421.306
421.312
421.320
421.321
421.333
421.334
421.335
Titanium Plates
1.3 mm Straight Plate, 6 holes
1.3 mm Straight Plate, 12 holes
1.3 mm Extended H-Plate, right
1.3 mm Extended H-Plate, left
1.3 mm T-Plate, 3 holes head, 8 holes shaft
1.3 mm T-Plate, 4 holes head, 8 holes shaft
1.3 mm Y-Plate, 3 holes head, 8 holes shaft
5/11
1-45
305.086
304.577
306.667.96
310.111
310.141
310.971
314.67.96
Instruments
1.1 mm Drill Bit, mini quick coupling, 55 mm, 2 ea.
1.5 mm Drill Bit, mini quick coupling, 65 mm, 2 ea.
Countersink, for 1.3 mm and 1.5 mm screws
Cruciform Screwdriver Blade, with Holding Sleeve,
for 1.5 mm and 2.0 mm screws
200.806
200.824
246.031
246.191
246.233
246.234
246.482
246.483
246.612
246.61
246.62
400.806.96
400.824.96
446.031
446.032
446.233
446.234
446.482
446.483
446.612
446.63.96
446.64.96
Plates
and Screws
5/11
1-46
Plates
and Screws
305.087
304.578
306.667.96
310.141
310.201
310.972
314.67.96
Instruments
1.5 mm Drill Bit, mini quick coupling, 65 mm, 2 ea.
2.0 mm Drill Bit, mini quick coupling, 65 mm, 2 ea.
Countersink, for 2.0 mm and 2.4 mm screws
Cruciform Screwdriver Blade, with Holding Sleeve,
for 1.5 mm and 2.0 mm screws
201.806
201.832
243.61
243.62
247.031
243.091
247.232
247.233
247.612
243.584
243.586
243.588
401.806.96
401.832.96
443.61.96
443.62.96
447.031
447.032
447.232
447.233
447.612
449.931
449.936
449.938
5/11
1-47
305.088
304.579
306.667.96
310.972
312.92
317.861
317.871
329.09
Instruments
Countersink, for 2.0 mm and 2.4 mm screws
Threaded Drill Guide, for 2.4 mm Condylar Plate
1.8 mm Drill Bit, mini quick coupling, 80 mm, 2 ea.
2.4 mm Drill Bit, mini quick coupling, 80 mm, 2 ea.
Bending Iron, for 2.4 mm Condylar Plate
201.636
201.662
201.968
249.906
249.912
249.913
249.914
249.915
249.916
249.917
249.924
249.926
249.928
401.506.96
401.532.96
401.968.96
449.906
449.912
449.913
449.914
449.915
449.916
449.917
449.924
449.926
449.928
Plates
and Screws
5/11
1-48
Plates
and Screws
60.110.050
310.25
310.288
311.43
312.648
314.116
314.467
319.01
323.061
323.062
323.26
323.36
399.48
Instruments
2.5 mm Drill Bit, quick coupling, 110 mm, gold, 2 ea.
2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.
Handle, with quick coupling, 2 ea.
2.8 mm Threaded Drill Guide, for 3.5 mm Locking Screws, 2 ea.
StarDrive Screwdriver Shaft, T15, self-retaining, quick coupling, 2 ea.
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Depth Gauge, for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws, measures up to 60 mm
2.0 mm Threaded Drill Guide, with Depth Gauge, 2 ea.
2.0 mm Drill Bit with depth mark, quick coupling, 140 mm, 2 ea.
2.7 mm Universal Drill Guide
3.5 mm Universal Drill Guide
Periosteal Elevator, 3 mm width, curved blade
Also available: LCP Wrist Fusion Instrument and Implant Set (01.110.051) which consists of: LCP Wrist Fusion Instrument Set
(01.110.050) and LCP Wrist Fusion Implant Module Set (01.110.052).
LCP Wrist Fusion Instrument and Implant Set (01.110.061) which consists of: LCP Wrist Fusion Instrument Set
(01.110.050) and LCP Wrist Fusion Titanium Implant Module Set (01.110.062).
5/11
1-49
60.110.052
02.110.150
02.110.151
02.110.152
04.110.150
04.110.151
04.110.152
Plates
and Screws
02.200.012
02.200.028
04.200.012
04.200.028
202.210
202.224
402.210
402.224
202.870
202.884
402.870
402.884
212.102
212.110
412.102
412.110
Also available: LCP Wrist Fusion Instrument and Implant Set (01.110.051) which consists of: LCP Wrist Fusion Instrument Set
(01.110.050) and LCP Wrist Fusion Implant Module Set (01.110.052).
LCP Wrist Fusion Instrument and Implant Set (01.110.061) which consists of: LCP Wrist Fusion Instrument Set
(01.110.050) and LCP Wrist Fusion Titanium Implant Module Set (01.110.062).
5/11
1-50
Plates
and Screws
690.330
690.331
Titanium Wrist Fusion Instrument and Implant Set Graphic Case, for self-tapping screws
Wrist Fusion Instrument and Implant Set Graphic Case, for self-tapping screws
310.19
310.25
314.02
319.04
319.97
323.26
323.36
399.48
202.810
202.824
204.812
204.828
242.510
242.520
242.530
402.810
402.824
442.51
442.52
442.53
Also available: Wrist Fusion Implant Set, with self-tapping screws (105.459)
In Implant Tray (305.062), with same implants as (105.458)
Titanium Wrist Fusion Implant Set, with self-tapping screws (145.459)
In Implant Tray (304.363), with same implants as (145.457)
Titanium Wrist Fusion Instrument and Implant Sets (145.455) and (145.451)
with non-self-tapping screws
Taps (311.26) and (311.32) and Handle, with quick coupling (311.43)
5/11
1-51
690.329
Plates
and Screws
310.19
310.25
311.26
311.32
311.43
314.02
319.04
319.97
323.26
323.36
399.48
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Tap for 2.7 mm Cortex Screws
Tap for 3.5 mm Cortex Screws
Handle, with quick coupling
Small Hexagonal Screwdriver with Holding Sleeve
Depth Gauge, for 2.7 mm and 3.5 mm screws
Screw Forceps
2.7 mm Universal Drill Guide
3.5 mm Universal Drill Guide
Periosteal Elevator, 3 mm width, curved blade, straight edge
402.010
402.024
404.012
404.028
442.51
442.52
442.53
Implants
2.7 mm Titanium Cortex Screws
5 ea.: 10, 12, 14, 16, 18, 20, 22 and 24 mm
3.5 mm Titanium Cortex Screws
5 ea.: 12, 14, 16, 18, 20, 22, 24, 26 and 28 mm
Titanium Wrist Fusion Plate, standard bend, 8 holes
Titanium Wrist Fusion Plate, short bend, 8 holes
Titanium Wrist Fusion Plate, straight, 9 holes
5/11
1-52
Plates
and Screws
2.4 mm Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
01.211.219 2.4 mm Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
01.211.419 2.4 mm Titanium Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
03.211.005
03.211.007
01.210.110
01.211.112
01.210.210
01.211.214
01.211.215
01.211.216
01.211.217
01.211.218
01.210.110
01.211.112
01.210.410
01.211.414
01.211.415
01.211.416
01.211.417
01.211.418
5/11
1-53
2.7 mm Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
Plates
and Screws
01.211.220 2.7 mm Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
01.211.420 2.7 mm Titanium Variable Angle LCP Forefoot /Midfoot Instrument and Implant Set
03.211.005
03.211.007
01.210.111
01.211.112
01.210.211
01.211.214
01.211.215
01.211.216
01.211.217
01.211.218
01.210.111
01.211.112
01.210.411
01.211.414
01.211.415
01.211.416
01.211.417
01.211.418
5/11
1-54
Plates
and Screws
60.116.050
60.116.058
60.116.071
60.116.452
60.116.507
60.116.521
60.116.554
01.116.534
Graphic Cases
Screw Module Shell
2.4 Screw Block
2.4 Flip-Up Screw Rack, 2 ea.
Screw Type Push Pin, Blank
Screw Type Push Pin, Cortex
Screw Type Push Pin, VA Locking
Label Pack for 2.4 mm screws and instruments
Length Market Push Pin Set
02.210.110
02.210.156
201.760
201.790
02.210.942
02.210.956
04.210.110
04.210.156
401.760
401.790
04.210.942
04.210.956
5/11
1-55
60.210.003
Graphic Case
2.4 mm Variable Angle Locking and Cortex Screw Instrument Module Case
03.110.000
03.110.002
03.110.005
03.110.023
03.110.024
03.111.038
03.211.001
310.509
310.530
310.972
312.18
314.453
314.467
314.468
319.006
323.202
Instruments
1.8 mm Universal Variable Angle Locking Drill Guide
Torque Limiting Attachment, 1.2 Nm
Handle for Torque Limiting Attachment
1.8 mm Variable Angle Locking Drill Guide, cone
1.8 mm Variable Angle Locking Drill Guide, coaxial
Handle with quick coupling
2.4 mm/2.7 mm Variable Angle LCP Plate Holding Pins, 2 ea.
1.8 mm Drill Bit with depth mark, quick coupling, 2 ea
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.0 mm and 2.4 mm screws
2.4 mm/1.8 mm Double Drill Sleeve
Short StarDrive Screwdriver Shaft, T8, 55 mm, 2 ea.
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Holding Sleeve, for StarDrive Screwdriver Shaft, T8
Depth Gauge, for 2.0 mm and 2.4 mm screws
2.4 mm Universal Drill Guide
Plates
and Screws
01.210.110 2.4 mm Variable Angle Locking and Cortex Screw Instrument Set
5/11
1-56
Plates
and Screws
60.116.050
60.116.059
60.116.072
60.116.452
60.116.507
60.116.521
60.116.555
01.116.534
Graphic Cases
Screw Module Shell
2.7 mm Screw Block
2.7 mm Flip-Up Screw Rack, 2 ea.
Screw Type Push Pin, Blank
Screw Type Push Pin, Cortex
Screw Type Push Pin, VA Locking
Label Pack for 2.7 mm screws and instruments
Length Market Push Pin Set
02.211.010
02.210.056
202.870
202.969
04.211.010
04.210.056
402.870
402.969
5/11
1-57
60.211.003
2.7 mm Variable Angle Locking and Cortex Screw Instrument Module Case
03.110.002
03.110.005
03.111.038
03.211.001
03.211.002
03.211.003
03.211.004
310.26
310.87
312.24
314.453
314.467
314.468
319.01
323.062
323.26
Instruments
Torque Limiting Attachment, 1.2 Nm
Handle for Torque Limiting Attachment
Handle with quick coupling
2.4 mm/2.7 mm Variable Angle LCP Plate Holding Pins, 2 ea.
2.0 mm Universal Variable Angle Locking Drill Guide
2.0 mm Variable Angle Locking Drill Guide, variable
2.0 mm Variable Angle Locking Drill Guide, coaxial
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.7 mm cortex screws
2.7 mm/2.0 mm Double Drill Sleeve
Short StarDrive Screwdriver Shaft, T8, 55 mm, 2 ea.
StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
Holding Sleeve, for StarDrive Screwdriver Shaft, T8
Depth Gauge, for small screws
2.0 mm Drill Bit with depth mark, quick coupling, 140 mm
2.7 mm Universal Drill Guide
Plates
and Screws
01.211.111 2.7 mm Variable Angle Locking and Cortex Screw Instrument Set
5/11
1-58
Plates
and Screws
60.116.052
60.211.008
Graphic Cases
Module Shell
Compression Wires and Forceps Module Bin
03.211.400
Instruments
Compression Forceps
03.211.410
03.211.415
03.211.420
03.211.425
03.211.430
03.211.435
03.211.440
02.211.201
02.211.202
02.211.203
02.211.204
02.211.262
02.211.263
04.211.201
04.211.202
04.211.203
04.211.204
04.211.262
04.211.263
5/11
1-59
60.211.006
Graphic Case
TMT, First TMT, Cloverleaf, Plate Module Bin
02.211.246
02.211.247
02.211.266
02.211.250
02.211.251
02.211.252
02.211.256
02.211.258
02.211.260
02.211.257
02.211.259
02.211.261
02.211.253
02.211.254
02.211.255
02.211.265
Plates
and Screws
04.211.246
04.211.247
04.211.266
04.211.250
04.211.251
04.211.252
04.211.256
04.211.258
04.211.260
04.211.257
04.211.259
04.211.261
04.211.253
04.211.254
04.211.255
04.211.265
5/11
1-60
Plates
and Screws
60.116.052
60.211.009
Graphic Cases
Module Shell
Proximal and Distal Reamers Module Bin 1
292.56
Implant
1.6 mm Kirschner Wire, 150 mm, trocar points on both ends, 10/pkg.
03.211.114
03.211.116
03.211.118
03.211.120
03.211.122
03.211.124
Instruments
Cannulated Reamers, proximal, for 1.6 mm K-Wires
Diameter (mm)
14
16
18
20
22
24
03.211.014
03.211.016
03.211.018
03.211.020
03.211.022
03.211.024
Also available: 6 mm12 mm Proximal and Distal Reamer Set (01.211.113) with Proximal and Distal Reamers Module Bin 2
(60.211.010) and the following:
1.25 mm Kirschner Wire, 150 mm, trocar points on both ends, 10/pkg. (292.52)
Cannulated Reamers (for 1.25 mm K-Wires)
Proximal
Distal
Diameter (mm)
03.211.106
03.211.006
6
03.211.108
03.211.008
8
03.211.110
03.211.010
10
03.211.112
03.211.012
12
Illustrations not actual size
5/11
1-61
60.211.001
Graphic Case
First MTP Fusion Module Bin
02.211.230
02.211.231
02.211.232
02.211.233
02.211.234
02.211.235
02.211.236
02.211.237
02.211.238
02.211.239
02.211.240
02.211.241
02.211.242
02.211.243
02.211.244
02.211.245
Plates
and Screws
04.211.230
04.211.231
04.211.232
04.211.233
04.211.234
04.211.235
04.211.236
04.211.237
04.211.238
04.211.239
04.211.240
04.211.241
04.211.242
04.211.243
04.211.244
04.211.245
5/11
1-62
Plates
and Screws
60.116.052
60.211.007
Graphic Cases
Module Shell
Opening Wedge Plate and Instrument Module Bin
03.211.009
Instrument
Opening Wedge Measuring Instrument
02.211.210
02.211.211
02.211.212
02.211.213
02.211.214
02.211.215
04.211.210
04.211.211
04.211.212
04.211.213
04.211.214
04.211.215
5/11
1-63
60.211.005
Graphic Case
Tarsal and Mesh Plate Module Bin
02.211.220
02.211.221
02.211.222
02.211.224
04.211.220
04.211.221
04.211.222
04.211.224
Plates
and Screws
5/11
1-64
Plates
and Screws
60.111.004
02.100.020
02.100.021
02.100.022
02.100.023
247.702
247.704
247.706
247.710
247.711
249.690
249.691
04.100.020
04.100.021
04.100.022
04.100.023
447.702
447.704
447.706
447.710
447.711
449.690
449.691
5/11
1-65
690.354
105.101
105.102
105.103
105.104
105.105
105.106
105.107
Contents
Modular Foot Instrument Set (complete)
2.0 mm/2.4 mm Foot Module Set (complete)
2.7 mm Foot Module Set (complete)
3.5 mm/4.0 mm Foot Module Set (complete)
Kirschner Wire Implant Module Set (complete)
3.5 mm/4.0 mm Screw Set for Modular Foot System (complete)
Supplemental Instrument Set for Modular Foot System (complete)
Plates
and Screws
Note: See individual set pages for the contents of each Foot Module Set.
5/11
1-66
Plates
and Screws
690.354.30
690.354.50
310.972
311.01
311.43
312.20
312.401
313.94.96
314.075
314.08
314.09
314.67.97
319.006
319.09
323.201
323.202
323.26
323.36
347.985
391.82
391.962
391.963
392.00
Instruments
Countersink, for 2.0 mm and 2.4 mm screws
Handle, with mini quick coupling
Handle, with quick coupling
2.0 mm Parallel Drill Guide and Drill Sleeve
4.0 mm/2.9 mm Double Drill Sleeve
2.4 mm Cruciform Screwdriver, with Holding Sleeve
Hexagonal Screwdriver, 2.5 mm, with ergonomic handle
Holding Sleeve (for use with 314.29)
Holding Sleeve
Cruciform Screwdriver Shaft, with Holding Sleeve (1.5 mm/2.0 mm)
Depth Gauge
Depth Gauge, for small screws
2.0 mm Universal Drill Guide
2.4 mm Universal Drill Guide
2.7 mm Universal Drill Guide
3.5 mm Universal Drill Guide
Screw and Plate Holding Forceps
Wire-Bending Pliers, 160 mm
Bending/Cutting Pliers
Universal Bending Pliers
Bending Iron, for 1.25 mm, 1.6 mm, 2.0 mm Kirschner wires
5/11
1-67
304.066
310.16
310.19
310.520
310.530
312.92
Instruments
1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Drill Bit, quick coupling, 125 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Threaded Drill Guide, 2 ea.
201.638
201.670
Implants
2.4 mm Cortex Screws, self-tapping
4 ea.: 8, 10, 12, 14, 16, 18, 20 and 22 mm
3 ea.: 24, 26, 28, 30, 32, 34, 36, 38 and 40 mm
201.808
201.840
201.980
243.234
243.584
243.586
243.588
243.61
243.62
249.916
249.917
249.919
249.921
249.924
249.926
249.928
Plates
and Screws
5/11
1-68
Plates
and Screws
305.067
310.21
310.26
310.87
311.26
Instruments
2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 2.7 mm cortex screws
Tap for 2.7 mm cortex screws
202.810
202.855
242.04
242.06
242.204
242.206
242.31
242.32
242.33
242.34
242.41
242.535
242.536
242.61
242.62
245.98
245.99
Implants
2.7 mm Cortex Screws
3 ea.: 10, 12, 14, 16, 18, 20, 22, 24, 26,
28, 30, 32, 34, 36, 38, 40 and 45 mm
2 ea.: 50 and 55 mm
Quarter-Tubular Plate with collar, 4 holes
Quarter-Tubular Plate with collar, 6 holes
2.7 mm LC-DCP Plate, 4 holes
2.7 mm LC-DCP Plate, 6 holes
2.7 mm L-Plate, 3 holes, right
2.7 mm L-Plate, 3 holes, left
2.7 mm L-Plate, 3 holes, oblique right
2.7 mm L-Plate, 3 holes, oblique left
2.7 mm T-Plate
2.7 mm Hind/Midfoot Plate, 5 holes
2.7 mm Hind/Midfoot Plate, 8 holes
2.7 mm Condylar Plate, 7 holes, left
2.7 mm Condylar Plate, 7 holes, right
2.7 mm Calcaneal Reconstruction Plate, 8 holes
2.7 mm Calcaneal Reconstruction Plate, 9 holes
5/11
1-69
305.068
310.229
310.23
310.35
310.401
310.89
311.33
311.34
311.400
Instruments
2.9 mm Drill Bit, quick coupling, 150 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 180 mm, gold, 2 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
4.0 mm Drill Bit, quick coupling, 160 mm, 2 ea.
Countersink, for 3.5 mm cortex and 4.0 mm cancellous bone screws
Tap for 3.5 mm cortex screws, 180 mm, gold
Tap for 4.0 mm cancellous bone screws, 110 mm
Tap for 4.0 mm cortex screws, 150 mm
241.34
241.35
241.36
241.38
Implants
One-Third Tubular Plate with collar, 4 holes, 2 ea.
One-Third Tubular Plate with collar, 5 holes, 2 ea.
One-Third Tubular Plate with collar, 6 holes, 2 ea.
One-Third Tubular Plate with collar, 8 holes, 2 ea.
Plates
and Screws
5/11
1-70
Plates
and Screws
690.354.60
319.97
Instruments
Screw Forceps
204.810
204.875
Implants
3.5 mm Cortex Screws, self-tapping
3 ea.: 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38,
40, 42, 44, 46, 48, 50, 55, 60, 65, 70 and 75 mm
206.010
206.060
206.424
206.495
207.030
207.050
219.98
5/11
1-71
690.354.70
690.354.80
319.391
398.96
399.195
399.197
399.361
399.48
399.481
399.94
399.97
Instruments
Sharp Hook, small taper
Stagbeetle Forceps, 125 mm
Hohmann Retractor, 8 mm round tip, 215 mm
Hohmann Retractor, 8 mm narrow tip, 215 mm
Periosteal Elevator, 90 blade
Periosteal Elevator, 3 mm curved blade, straight edge
Periosteal Elevator, 3 mm curved blade, round edge
Reduction Forceps, with points, ratchet, 174 mm
Reduction Forceps, with points, ratchet, 130 mm
Plates
and Screws
5/11
1-72
Plates
and Screws
301.10
302.25
302.62
Aluminum Case
Instrument Tray
Instrument Tray
310.19
310.25
310.26
310.35
310.87
310.89
311.26
311.32
311.33
311.34
311.44
312.24
312.28
314.02
314.03
319.09
319.39
329.04
329.05
392.00
392.02
391.90
398.96
398.99
399.18
399.19
399.45
399.36
399.97
399.99
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 110 mm, gold, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink, for 2.7 mm Cortex Screws
Countersink, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Tap for 2.7 mm Cortex Screws, 110 mm, 2 ea.
Tap for 3.5 mm Cortex and 3.5 mm Shaft Screws, 110 mm, gold
Tap for 3.5 mm Cortex and 3.5 mm Shaft Screws, 180 mm, gold
Tap for 4.0 mm Cancellous Bone Screws, 110 mm, 2 ea.
T- Handle, with quick coupling
2.7 mm/2.0 mm Double Drill Sleeve
3.5 mm/2.5 mm Double Drill Sleeve
Small Hexagonal Screwdriver with Holding Sleeve
Small Hexagonal Screwdriver Shaft
Depth Gauge, for 2.7 mm and 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Sharp Hook
Bending Iron, for 2.7 mm and 3.5 mm plates
} Used as a pair
Bending Iron, for 2.7 mm and 3.5 mm plates
Bending Iron, for 1.25 mm, 1.6 mm and 2.0 mm Kirschner Wires
Bending Iron, for 0.8 mm1.25 mm Kirschner Wires
Small Wire Cutter, 160 mm length
Stagbeetle Forceps, 120 mm length, 2 ea.
Holding Forceps, for small plates, 135 mm length
Hohmann Retractor, 6 mm width
Hohmann Retractor, 8 mm width
Hohmann Retractor, with broad shank
Periosteal Elevator, 6 mm, curved blade, round edge
Reduction Forceps, with points, 130 mm length, ratchet
Reduction Forceps, with serrated jaw, 144 mm length, ratchet
Illustrations not actual size
5/11
1-73
301.49
302.25
302.39
302.92
Aluminum Case
Instrument Tray
Screw Rack
Instrument Tray
310.29
310.31
310.44
310.48
310.99
311.66
312.46
312.67
314.27
319.10
391.85
391.88
399.10
399.37
399.98
Instruments
3.2 mm Drill Bit, quick coupling, 195 mm
3.2 mm Drill Bit, quick coupling, 145 mm
4.5 mm Drill Bit, quick coupling, 145 mm
4.5 mm Drill Bit, quick coupling, 195 mm
Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Tap for 6.5 mm Cancellous Bone Screws, 197 mm, 150 mm calibration
4.5 mm/3.2 mm Double Drill Sleeve
6.5 mm/3.2 mm Double Drill Sleeve
Large Hexagonal Screwdriver
Depth Gauge, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Flat-Nosed Parallel Pliers, 160 mm length
Locking Pliers, 180 mm length
Bone Spreader, 8 mm beak width, 210 mm length
Periosteal Elevator, 14 mm width, straight blade, round edge
Reduction Forceps, with points, 205 mm length, ratchet
207.020
207.040
Implants
4.0 mm Cancellous Bone Screws, partially threaded
4 ea.: 20, 24, 30 and 40 mm
216.035
216.090
217.045
217.090
218.075
218.090
219.99
292.20
Plates
and Screws
5/11
1-74
Plates
and Screws
305.069
392.178
392.179
Instruments
Protective Caps (10/pkg.)
For 1.6 mm K-wires
For 2.0 mm K-wires
292.10
292.12
292.16
292.20
Implants
Kirschner Wires, 150 mm, with trocar point (10/pkg.)
1.0 mm dia.
1.25 mm dia.
1.6 mm dia.
2.0 mm dia.
292.50
292.52
292.56
292.58
292.73
292.79
5/11
1-75
2.7 mm/3.5 mm LCP Distal Fibula Plate Instrument and Implant Set
60.112.046
60.112.047
311.43
313.353
314.467
319.006
323.061
323.062
511.776
02.112.106
02.112.107
02.112.108
02.112.109
02.112.110
02.112.111
02.112.112
02.112.113
02.112.114
02.112.115
02.112.118
02.112.119
02.112.122
02.112.123
202.208
202.230
02.112.136
02.112.137
02.112.138
02.112.139
02.112.140
02.112.141
02.112.142
02.112.143
02.112.144
02.112.145
02.112.148
02.112.149
02.112.152
02.112.153
Plates
and Screws
01.112.077 2.7 mm/3.5 mm LCP Distal Fibula Plate Instrument and Implant Set
01.112.080 2.7 mm/3.5 mm Titanium LCP Distal Fibula Plate Instrument and Implant Set
5/11
1-76
Plates
and Screws
2.7 mm/3.5 mm LCP Distal Fibula Plate Instrument and Implant Set
01.112.077 2.7 mm/3.5 mm LCP Distal Fibula Plate Instrument and Implant Set continued
01.112.080 2.7 mm/3.5 mm Titanium LCP Distal Fibula Plate Instrument and Implant Set
04.112.106
04.112.107
04.112.108
04.112.109
04.112.110
04.112.111
04.112.112
04.112.113
04.112.114
04.112.115
04.112.118
04.112.119
04.112.122
04.112.123
402.208
402.230
04.112.136
04.112.137
04.112.138
04.112.139
04.112.140
04.112.141
04.112.142
04.112.143
04.112.144
04.112.145
04.112.148
04.112.149
04.112.152
04.112.153
5/11
1-77
304.330
304.490
3.0 mm Cannulated Screw Instrument and Implant Set Graphic Case (for Set 105.17)
3.0 mm Titanium Cannulated Screw Instrument and Implant Set Graphic Case (for Set 145.17)
292.622
292.623
309.501
310.221
310.804
311.43
312.151
312.153
313.969
314.463
314.464
314.465
319.291
319.292
319.702
319.97
398.408
398.409
Instruments
1.1 mm Threaded Guide Wire, 150 mm, 10 ea.
1.1 mm Non-Threaded Guide Wire, 150 mm, 10 ea.
Conical Extraction Device for Threaded Washers
2.0 mm Cannulated Drill Bit, quick coupling, 150 mm, 2 ea.
Cannulated Countersink
Handle with quick coupling
2.0 mm/1.1 mm Double Drill Sleeve
5.5 mm/4.3 mm Double Drill Sleeve
Holding Sleeve
Cannulated Cruciform Screwdriver
Cannulated Driver for Threaded Washers
Solid Cruciform Screwdriver Shaft
1.25 mm Cleaning Brush
1.1 mm Cleaning Stylet
Cannulated Screw Measuring Device
Screw Forceps
Freer Elevator, 19.5 cm
Scaphoid Elevator, 14 cm
202.608
202.640
402.608
402.640
202.714
202.740
219.89
219.972
419.89
419.972
Plates
and Screws
5/11
1-78
Plates
and Screws
690.347
310.21
310.25
310.288
310.35
310.89
311.32
311.34
311.43
312.20
312.30
312.648
314.02
314.03
314.115
314.116
315.28
319.01
319.39
319.97
323.023
323.025
323.050
323.053
323.054
323.055
323.26
323.36
324.023
324.024
324.031
329.04
329.05
329.07
329.820
329.87
329.89
391.82
392.00
398.40
398.41
398.811
399.091
399.19
399.36
399.49
399.99
511.773
5/11
1-79
202.810
202.855
204.216
204.238
241.031
241.041
241.051
241.071
241.931
241.941
241.951
241.971
241.131
241.151
241.171
204.810
204.860
206.010
206.060
207.010
207.050
212.101
212.124
219.98
223.551
223.561
223.581
223.591
223.601
223.621
223.641
241.901
241.903
245.051
245.061
245.071
245.081
245.101
245.121
292.12
292.20
292.71
Plates
and Screws
Also available: Small Fragment LCP Instrument and Titanium Implant Set, with self-tapping screws (145.434), in
Graphic Case [690.410], with titanium implants, and Self-Centering Bone Forceps (398.80) in place of
Bone Holding Forceps (399.091)
3.5 mm LCP Long Proximal Humerus Plate Implant Set (01.109.602)
3.5 mm Titanium LCP Long Proximal Humerus Plate Implant Set (01.109.604)
LCP Cannulated Screw Instrument Set (105.436)
Additional implant sizes
Illustrations not actual size
R
5/11
1-80
Plates
and Screws
690.387
292.62
310.67
310.86
311.63
312.35
314.08
314.29
319.15
319.25
319.38
Instruments
1.25 mm Threaded Guide Wire, 150 mm
2.7 mm Cannulated Drill Bit, quick coupling, 160 mm
Cannulated Countersink, for 3.5 mm and 4.0 mm cannulated screws
Cannulated Tap for 4.0 mm cannulated screws, 147 mm
2.7 mm/1.25 mm Double Drill Sleeve
Holding Sleeve
Cannulated 2.5 mm Hexagonal Screwdriver
Cannulated Screw Measuring Device, for 3.5 mm and 4.0 mm cannulated screws
1.35 mm Cleaning Brush
1.25 mm Cleaning Stylet
5/11
1-81
304.355
304.445
292.12
292.16
292.20
310.25
310.35
310.89
311.32
311.34
311.44
312.20
312.28
312.30
314.02
314.03
319.04
319.39
319.97
323.35
323.36
329.04
329.05
329.87
329.89
391.82
392.00
398.40
398.41
398.80
399.19
399.36
399.49
399.99
5/11
Plates
and Screws
105.445 Small Fragment Instrument and Implant SetLC-DCP, with self-tapping screws
145.448 Small Fragment Instrument and Titanium Implant SetLC-DCP, with self-tapping screws
1-82
Plates
and Screws
404.216
404.238
204.810
204.850
404.810
404.850
206.010
206.060
406.010
406.060
207.010
407.010
419.98
207.050
219.98
407.050
223.56
223.57
223.58
223.59
223.60
423.56
423.57
423.58
423.59
423.60
241.13
241.15
241.23
241.24
241.25
3.5 mm T-Plates
3 holes, 3 holes head, right angle
5 holes, 3 holes head, right angle
3 holes, 3 holes head, oblique angle
4 holes, 3 holes head, oblique angle
5 holes, 3 holes head, oblique angle
441.13
441.15
441.23
441.24
441.25
241.32
241.40
441.32
441.40
241.83
241.84
441.83
441.84
492.12
492.16
492.20
Also available: Small Fragment Instrument and Titanium Implant SetLC-DCP Screw Rack (145.449) with 3.5 mm Titanium
Cortex Screws, self-tapping (404.810.850)
Small Fragment Instrument and Implant SetsLC-DCP (105.440) with Graphic Case (304.350) and 3.5 mm
Cortex Screws (204.010.050)
Small Fragment Instrument and Implant SetLC-DCP (145.44) with Graphic Case (304.440) and 3.5 mm
Titanium Cortex Screws (404.010.050)
Small Fragment Instrument and Implant Sets (105.445J and 145.448J) with Jacobs chuck drill bits (310.24
and 310.36) instead of standard drill bits
Small Fragment Instrument and Implant SetsLC-DCP (105.440J and 145.44J) with Jacobs chuck drill bits
(310.24 and 310.36) instead of standard drill bits
5/11
1-83
305.405
Small Fragment Instrument and Implant Set Graphic Case, for self-tapping screws
310.25
310.35
310.89
311.32
311.34
311.43
312.20
312.28
312.30
314.02
314.03
319.04
319.39
319.97
322.32
329.04
329.05
329.55
329.57
398.80
399.18
399.19
399.40
399.49
399.97
399.99
Instruments
2.5 mm Drill Bit, quick coupling, 110 mm, gold, 3 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Tap for 3.5 mm Cortex and 3.5 mm Shaft Screws, 110 mm, gold, 2 ea.
Tap for 4.0 mm Cancellous Bone Screws, 110 mm, 2 ea.
Handle, with quick coupling
2.0 mm Parallel Drill Guide and Drill Sleeve
3.5 mm/2.5 mm Double Drill Sleeve
3.5 mm/2.5 mm Insert Drill Sleeve
Small Hexagonal Screwdriver with Holding Sleeve
Small Hexagonal Screwdriver Shaft
Depth Gauge, for 2.7 mm and 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Sharp Hook
Screw Forceps
3.5 mm DCP Drill Guide, neutral and load
Bending Iron, for 2.7 mm and 3.5 mm plates } Used as a pair
Bending Iron, for 2.7 mm and 3.5 mm plates
Bending Template, 5 holes
Bending Template, 7 holes
Self-Centering Bone Forceps, size 0, extra small serrated jaw, 10 mm
Hohmann Retractor, 6 mm width
Hohmann Retractor, 8 mm width
Periosteal Elevator, 6 mm width, curved blade, straight edge
Hohmann Retractor, 15 mm width, 2 ea.
Reduction Forceps, with points, 130 mm length, ratchet
Reduction Forceps, with serrated jaw, 144 mm length, ratchet
Plates
and Screws
5/11
1-84
Plates
and Screws
Implants
3.5 mm Cortex Screws, self-tapping
8 ea.: 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 32, 36 and 40 mm
6 ea.: 45 mm and 50 mm
206.014
206.060
207.012
207.050
219.98
241.32
241.38
241.13
241.14
241.23
241.25
241.83
241.84
248.06
248.10
292.12
292.20
5/11
1-85
690.486
223.406
223.407
223.408
223.409
223.410
223.411
223.412
223.414
223.416
223.418
423.406
423.407
423.408
423.409
423.410
423.411
423.412
423.414
423.416
423.418
224.753
224.754
224.755
224.756
224.757
224.758
224.759
224.761
224.763
224.765
424.753
424.754
424.755
424.756
424.757
424.758
424.759
424.761
424.763
424.765
Plates
and Screws
5/11
1-86
Plates
and Screws
60.112.006
60.112.008
323.35
Instrument
3.5 mm LC-DCP Drill Guide, neutral and load
223.55
223.56
223.57
223.58
223.59
223.60
423.55
423.56
423.57
423.58
423.59
423.60
241.13
241.15
241.23
241.24
241.25
3.5 mm T-Plates
3 holes, 3 holes head, right angle, 50 mm
5 holes, 3 holes head, right angle, 67 mm
3 holes, 3 holes head, oblique angle, 53 mm
4 holes, 3 holes head, oblique angle, 63 mm
5 holes, 3 holes head, oblique angle, 75 mm
441.13
441.15
441.23
441.24
441.25
241.32
241.42
441.32
441.42
241.61
241.62
241.65
Calcaneal Plate, 60 mm
Calcaneal Plate, 70 mm
Calcaneal Y-Plate, 87 mm
441.61
441.62
441.65
241.83
241.84
241.87
241.88
441.83
441.84
441.87
441.88
245.15
245.16
245.17
245.18
245.19
245.00
445.15
445.16
445.17
445.18
445.19
445.00
5/11
1-87
304.210
292.62
310.67
310.86
311.39
311.43
312.28
312.35
312.85
314.03
314.08
314.29
319.15
319.25
319.38
319.97
Plates
and Screws
205.010
205.050
Implants
3.5 mm Cannulated Screws, partially threaded
3 ea.: 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
32, 34, 36, 38, 40, 42, 44, 46, 48 and 50 mm
219.98
5/11
1-88
Plates
and Screws
304.300
3.5 mm/4.0 mm Cannulated Screw Combined Instrument and Implant Set Graphic Case
292.62
292.626
310.67
310.68
310.86
311.39
311.43
311.63
312.28
312.35
312.85
314.03
314.08
314.10
314.29
319.15
319.25
319.38
319.97
Instruments
1.25 mm Threaded Guide Wire, 150 mm (10/pkg.), 2 pkg.
1.25 mm Nonthreaded Guide Wire, 150 mm (10/pkg.), 1 pkg.
2.7 mm Cannulated Drill Bit, quick coupling, 160 mm, 2 ea.
3.5 mm Cannulated Drill Bit, quick coupling, 160 mm, 2 ea.
Cannulated Countersink
Cannulated Tap for 3.5 mm Cannulated Screws
Handle with quick coupling
Cannulated Tap for 4.0 mm Cannulated Screws
3.5 mm/2.5 mm Double Drill Sleeve
2.7 mm/1.25 mm Double Drill Sleeve
3.5 mm/2.7 mm Drill Guide with stop, with 2 inserts
Small Hexagonal Screwdriver Shaft
Holding Sleeve, for Cannulated Screwdriver Shaft (314.29)
Cannulated Hexagonal Screwdriver Shaft
Cannulated Hexagonal Screwdriver
Cannulated Screw Measuring Device
1.35 mm Cleaning Brush
1.25 mm Cleaning Stylet
Screw Forceps
205.010
205.050
207.610
207.650
219.98
Implants
3.5 mm Cannulated Screws, partially threaded
3 ea.: 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
32, 34, 36, 38, 40, 42, 44, 46, 48 and 50 mm
4.0 mm Cannulated Screws, short thread
3 ea.: 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
32, 34, 36, 38, 40, 42, 44, 46, 48 and 50 mm
Washer, 7.0 mm, 6 ea.
5/11
1-89
60.112.010
329.930
329.931
329.932
329.933
329.934
329.935
Instruments
Sizing Templates for LCP Clavicle Hook Plate
12 mm depth, left
12 mm depth, right
15 mm depth, left
15 mm depth, right
18 mm depth, left
18 mm depth, right
Plates
and Screws
01.112.010 3.5 mm LCP Clavicle Hook Templates and Graphic Case Set
5/11
1-90
Plates
and Screws
60.123.001
Graphic Case for 3.5 mm LCP Periarticular Proximal Humerus Plate Set
02.123.020
02.123.021
02.123.022
02.123.023
02.123.024
02.123.025
02.123.026
02.123.027
02.123.028
02.123.029
02.123.030
02.123.031
Instruments
3.5 mm LCP Periarticular Proximal Humerus Plate
2 holes, 91 mm, right
2 holes, 91 mm, left
4 holes, 127 mm, right
4 holes, 127 mm, left
6 holes, 163 mm, right
6 holes, 163 mm, left
8 holes, 199 mm, right
8 holes, 199 mm, left
10 holes, 235 mm, right
10 holes, 235 mm, left
12 holes, 271 mm, right
12 holes, 271 mm, left
02.123.040
02.123.041
02.123.042
02.123.043
03.123.010
03.123.011
324.214
5/11
1-91
690.441
Graphic Case, for 3.5 mm LCP Long Proximal Humerus Plate Set
241.918
241.919
241.921
241.923
241.925
441.918
441.919
441.921
441.923
441.925
Plates
and Screws
5/11
1-92
Plates
and Screws
60.113.001
60.113.002
02.113.001
03.113.001
03.113.003
03.113.009
03.113.010
03.113.011
03.113.012
03.113.013
03.113.014
03.113.015
03.113.017
03.113.019
03.113.020
03.113.021
03.113.022
03.113.023
03.113.024
03.113.025
03.113.026
03.113.028
03.122.007
03.122.035
311.431
314.55
314.57
319.35
319.46
321.16
323.060
Instruments
1.6 mm Drill Tip Guide Wire, 200 mm, 8 ea.
Aiming Arm for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, right
Aiming Arm for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, left
Outer Sleeve for 3.5 mm LCP Percutaneous Instrument System, 4 ea.
Trocar with Handle for 3.5 mm LCP Percutaneous Instrument System
Scalpel with Handle for 3.5 mm LCP Percutaneous Instrument System
Neutral Drill Guide for 3.5 mm LCP Percutaneous Instrument System, 2 ea.
Compression Drill Guide for 3.5 mm LCP Percutaneous Instrument System, 2 ea.
Handle for Percutaneous Threaded Drill Guides, 2 ea.
Pull Reduction Device for 3.5 mm LCP Percutaneous Instrument System
Stopper for 3.5 mm LCP Percutaneous Instrument System, 8 ea.
Screwdriver Shaft StarDrive, 165 mm
2.8 mm Percutaneous Threaded Drill Guide, 2 ea.
Screwdriver StarDrive, T15, self-retaining, 272 mm
1.6 mm Percutaneous Threaded Wire Guide, 2 ea.
2.5 mm Calibrated Drill Bit, quick coupling, 250 mm/95 mm
2.8 mm Calibrated Drill Bit, quick coupling, 250 mm/95 mm
Insertion Handle for 3.5 mm Low Bend Medial Distal Tibia Plate, right
Insertion Handle for 3.5 mm LCP Low Bend Medial Distal Tibia Plate, left
Depth Gauge for 3.5 mm LCP Percutaneous Instrument System
Aiming Arm for LCP Proximal Humerus Plate
Insertion Handle for LCP Proximal Humerus Plate, StarDrive
Large Handle with quick coupling
Small Hexagonal Screwdriver Shaft, Long, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
Small Hexagonal Screwdriver, Long, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
1.6 mm Cleaning Stylet, for use with 4.5 mm Cannulated Screw System
2.8 mm Cleaning Stylet
Combination Wrench, 11 mm width across flats
Direct Measuring Device, for 3.5 mm LCP Proximal Humerus Plate, 6 holes head
5/11
1-93
305.078
3.5 mm 90 Cannulated LC-Angled Blade Plate Instrument and Implant Set Graphic Case (includes instrument tray)
292.65
310.69
315.05
319.21
321.16
332.015
332.016
332.017
332.019
332.403
232.046
232.049
232.056
232.059
232.066
232.069
232.086
232.089
232.006
232.009
432.046
432.049
432.056
432.059
432.066
432.069
432.086
432.089
432.006
432.009
Plates
and Screws
105.336 3.5 mm 90 Cannulated LC-Angled Blade Plate Instrument and Implant Set
145.336 3.5 mm 90 Titanium Cannulated LC-Angled Blade Plate Instrument and Implant Set
5/11
1-94
Plates
and Screws
690.415
690.417
Graphic Case for LCP Distal Humerus Plate Set (for set 01.104.000)
Graphic Case for Titanium LCP Distal Humerus Plate Set (for set 01.104.004)
310.510
310.530
314.467
314.468
319.006
323.061
323.062
323.202
399.98
511.776
Instruments
1.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
StarDrive Screwdriver Shaft, T8, 105 mm
Holding Sleeve, for StarDrive Screwdriver Shaft, T8
Depth Gauge, for 2.0 mm and 2.4 mm screws
2.0 mm Threaded Drill Guide with depth gauge, 2 ea.
2.0 mm Drill Bit with Depth Markings, quick coupling, 140 mm, 2 ea.
2.4 mm Universal Drill Guide
Reduction Forceps, with point
Torque Limiting Attachment, 0.8 Nm, quick coupling
5/11
1-95
201.760
201.790
202.210
202.260
241.262
241.263
241.264
241.265
241.266
241.267
401.760
401.790
402.210
402.260
441.262
441.263
441.264
441.265
441.266
441.267
Plates
and Screws
01.104.000 3.5 mm LCP Distal Humerus Plate Instrument and Implant Set continued
01.104.004 3.5 mm Titanium LCP Distal Humerus Plate Instrument and Implant Set
241.272
241.273
241.274
241.275
241.276
241.277
241.282
241.283
241.284
241.285
241.286
241.287
441.272
441.273
441.274
441.275
441.276
441.277
441.282
441.283
441.284
441.285
441.286
441.287
Also available: Small Fragment LCP Instrument and Implant Set (105.434)
Small Fragment LCP Instrument and Titanium Implant Set (145.434)
Longer lengths 3.5 mm LCP Distal Humerus Plates (stainless steel and titanium)
5/11
1-96
Plates
and Screws
60.104.010
02.104.004
02.104.006
02.104.008
02.104.010
02.104.012
02.104.014
02.104.024
02.104.026
02.104.028
02.104.030
02.104.032
02.104.034
Implants
3.5 mm LCP Extra-articular Distal Humerus Plates
122 mm, 4 holes, right
158 mm, 6 holes, right
194 mm, 8 holes, right
230 mm, 10 holes, right
266 mm, 12 holes, right
302 mm, 14 holes, right
122 mm, 4 holes, left
158 mm, 6 holes, left
194 mm, 8 holes, left
230 mm, 10 holes, left
266 mm, 12 holes, left
302 mm, 14 holes, left
5/11
1-97
60.104.015
312.910
312.911
02.113.103
Implants in 01.104.015
3.5 mm LCP Hook Plate, 3 hole, 2 ea.
04.113.103
Implants in 01.104.016
3.5 mm Titanium LCP Hook Plate, 3 hole, 2 ea.
236.502
236.503
236.504
236.505
236.506
236.507
236.508
236.509
236.510
236.511
236.512
236.513
436.502
436.503
436.504
436.505
436.506
436.507
436.508
436.509
436.510
436.511
436.512
436.513
Plates
and Screws
01.104.015
01.104.016
5/11
1-98
Plates
and Screws
690.426
690.436
690.437
690.438
690.912
03.100.034
03.100.036
03.100.037
319.97
Instruments
Bending Template, 20 holes, 260 mm
Bending Template for 3.5 mm Low Profile Reconstruction Plate, 88 mm radius, 16 holes
Bending Template for 3.5 mm Low Profile Reconstruction Plate, 108 mm radius, 16 holes
Screw Forceps
204.640
204.750
Implants
3.5 mm Pelvic Cortex Screws, self-tapping
4 ea.: 40 mm70 mm (5 mm increments)
2 ea.: 75 mm150 mm (5 mm increments)
204.810
204.838
212.101
212.131
219.98
02.100.004
02.100.006
245.023
245.024
245.025
245.026
245.027
245.028
245.029
245.030
245.031
245.032
245.033
245.034
245.035
245.036
245.038
245.039
10 holes, 130 mm
11 holes, 143 mm
12 holes, 156 mm
13 holes, 169 mm
14 holes, 182 mm
15 holes, 195 mm
16 holes, 208 mm
18 holes, 234 mm
20 holes, 260 mm
245.906
245.908
245.910
245.912
245.914
245.916
245.876
245.878
245.880
245.882
245.884
245.886
5/11
1-99
690.427
690.431
690.912
310.37
311.31
314.09
314.57
315.92
324.210
319.091
329.08
03.100.031
03.100.032
03.100.033
03.100.045
Instruments
3.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
Calibrated Tap for 3.5 mm Cortex Screws, quick coupling, 175 mm, 2 ea.
Holding Sleeve for 314.55 and 314.57
Small Hexagonal Pelvic Screwdriver
2.5 mm Three-Fluted Calibrated Drill Bit, quick coupling, 230 mm, 2 ea.
2.5 mm Percutaneous Drill Bit, quick coupling, 300 mm, 200 mm calibration, 2 ea.
Depth Gauge for 3.5 mm Cortex Screws
Bending Iron for 3.5 mm Low Profile Reconstruction Plates, 2 ea.
Bending Pliers for 3.5 mm Low Profile Reconstruction Plates
Ratcheting Handle with quick coupling
Long Hexagonal Screwdriver Shaft for 3.5 mm screws, 250 mm, 2 ea.
3.5 mm StarDrive Screwdriver Shaft, T-15, 250 mm
Plates
and Screws
5/11
1-100
Plates
and Screws
690.436
03.100.034
03.100.036
03.100.037
Instruments
Bending Templates
20 holes, for 3.5 mm Low Profile Reconstruction Plates
16 holes, for 3.5 mm Low Profile Curved Reconstruction Plates, 88 mm radius
16 holes, for 3.5 mm Low Profile Curved Reconstruction Plates, 108 mm radius
245.906
245.916
245.876
245.886
245.023
245.039
02.100.004,
02.100.006
219.98
Implants
3.5 mm Low Profile Curved Reconstruction Plates, 88 mm radius,
2 ea.: 6, 8, 10, 12, 14 and 16 holes, 78 mm-208 mm
3.5 mm Low Profile Curved Reconstruction Plates, 108 mm radius
2 ea.: 6, 8, 10, 12, 14 and 16 holes
3.5 mm Low Profile Reconstruction Plates,
2 ea.: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18 and 20 holes
3.5 mm Pubic Symphysis Plates, with coaxial Combi holes
2 ea.: 4 and 6 holes
7.0 mm Washer, for small screws, 4 ea.
Also available: 3.5 mm Wide Angle Low Profile Reconstruction Plate Tray (01.100.022) in tray (690.424)
with Bending Template (03.100.034)
3.5 mm Low Profile Reconstruction J-Plate Tray (01.100.032) in tray (690.423) with
Bending Templates (03.100.035) and (03.100.036)
3.5 mm Wide Angle Low Profile Reconstruction Plates (02.100.203)(02.100.220)
3.5 mm Locking Low Profile Reconstruction J-Plates (02.100.360)(02.100.367)
3.5 mm Low Profile Reconstruction J-Plates (02.100.920)(02.100.936)
Bending Template, for 3.5 mm Low Profile Reconstruction J-Plates (03.100.035)
Single Level, Two Level and Three Level Graphic Case Bases (690.911, 690.912 and 690.913)
Lid for 3.5 mm Low Profile Pelvic System (690.429)
5/11
1-101
690.428
690.433
690.434
690.913
294.68
393.10
398.65
398.74
398.75
398.88
399.98
03.100.018
03.100.019
03.100.020
03.100.021
03.100.022
03.100.023
03.100.024
03.100.025
03.100.027
03.100.028
03.100.029
03.100.030
Instruments
6.0 mm Schanz Screw, 190 mm, diamond point, 4 ea.
Universal Chuck with T-Handle
Forceps, for broken screw removal
Small Pelvic Forceps, 2 ea.
Medium Pelvic Forceps
Pelvic Reduction Forceps, speed lock
Reduction Forceps with points, 205 mm, ratchet, 2 ea.
Straight Ball Spike, with 6.5 mm ball, 300 mm
Straight Ball Spike, long, with 6.5 mm ball, 400 mm
Pelvic Reduction Forceps, with pointed-ball tips, 6.5 mm ball, 250 mm
Pelvic Reduction Forceps, angled, with pointed-ball tips, 6.5 mm ball, 200 mm
Pelvic Reduction Forceps, angled, with pointed-ball tips, 6.5 mm ball, 240 mm
Pelvic Reduction Forceps, with pointed-ball tips, 400 mm, 6.5 mm ball
Asymmetric Pelvic Reduction Forceps, 6.5 mm ball
Pelvic Reduction Forceps, used with 3.5 mm screws, 250 mm
Round Disk, 6.5 mm hole, 2 ea.
Rectangular Disk, 6.5 mm hole, 2 ea.
Medium Bone Hook, long, 330 mm
Large Bone Hook, long, 300 mm
Plates
and Screws
Also available: Medium and Large Bone Hooks (398.52) and (398.53)
Illustrations not actual size
R
5/11
1-102
Plates
and Screws
690.421
690.422
690.432
690.913
398.55
399.27
03.100.011
03.100.012
03.100.013
03.100.014
03.100.015
03.100.016
03.100.017
Instruments
Blunt Pelvic Retractor, 2 ea.
Hohmann Retractor, 18 mm width, long, narrow tip
Spoon Retractor, Medium, 268 mm length
Spoon Retractor, Large, 323 mm length
Sciatic Nerve Retractor
Sciatic Nerve RetractorLong
Malleable Retractors: 20 mm width
Malleable Retractors: 30 mm width
Malleable Retractors: 40 mm width
5/11
1-103
690.435
03.100.034
03.100.040
03.100.045
310.288
312.648
324.031
324.214
511.773
Instruments
Bending Template, 20 holes
2.8 mm Threaded Drill Guide, short, 35 mm, 2 ea.
3.5 mm StarDrive Screwdriver Shaft, T15, 250 mm, 2 ea.
2.8 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.8 mm Threaded Drill Guide, 2 ea.
Threaded Plate Holder, long
2.8 mm Drill Bit, quick coupling, 200 mm, 100 mm calibration., 2 ea.
Torque Limiting Attachment, 1.5 Nm, quick coupling
02.100.103
02.100.120
Implants
3.5 mm Locking Low Profile Reconstruction Plates
2 ea.: 320 hole, 39 mm260 mm
02.100.004,
02.100.006
02.200.003
Plates
and Screws
Also available: Single Level, Two Level and Three Level Graphic Case Bases (690.911, 690.912 and 690.913)
Lid for 3.5 mm Low Profile Pelvic System (690.429)
5/11
1-104
Plates
and Screws
690.437
690.438
319.97
Instrument
Screw Forceps
204.640
204.750
Implants
3.5 mm Pelvic Cortex Screws, self-tapping
4 ea.: 40 mm70 mm
2 ea.: 75 mm150 mm
204.810
204.838
212.101
212.131
Also available: 3.5 mm Low Profile Pelvic System Screw Tray without Locking Screws (01.100.142)
3.5 mm Low Profile Pelvic Implant Set (01.100.002) consists of sets 01.100.012,
01.100.122 and 01.100.142 with Two Level Graphic Case Base (690.912) and Lid (690.426)
5/11
1-105
690.439
Tray for 3.5 mm Low Profile Pelvic System StarDrive Cortex Screws
319.97
314.115
314.116
Instruments
Screw Forceps
StarDrive Screwdriver, T-15, self-retaining
StarDrive Screwdriver Shaft, T-15, self-retaining, quick coupling
02.200.010
02.200.150
Plates
and Screws
Implants
3.5 mm Cortex Screws, self-tapping, with StarDrive recess
4 ea.: 10 mm-70 mm
2 ea.: 75 mm-150 mm
Also available: Single Level, Two Level and Three Level Graphic Case Bases (690.911, 690.912 and 690.913)
Lid for 3.5 mm Low Profile Pelvic System (690.429)
5/11
1-106
Plates
and Screws
306.00
310.37
310.48
311.31
311.47
314.09
314.11
314.26
314.55
314.56
314.57
315.48
315.92
315.93
319.09
329.08
329.29
329.64
329.66
329.68
Instruments
3.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
Calibrated Tap for 3.5 mm Cortex Screws, quick coupling, 175 mm, 2 ea.
Calibrated Tap for 4.5 mm Cortex Screws, quick coupling, 175 mm
Holding Sleeve for 314.55 and 314.57
Holding Sleeve for 314.26 and 314.56
Large Hexagonal Pelvic Screwdriver
Small Hexagonal Pelvic Screwdriver Shaft
Large Hexagonal Pelvic Screwdriver Shaft
Small Hexagonal Pelvic Screwdriver
4.5 mm Three-Fluted Drill Bit, quick coupling, 195 mm, 2 ea.
2.5 mm Three-Fluted Calibrated Drill Bit, quick coupling, 230 mm, 2 ea.
3.2 mm Three-Fluted Calibrated Drill Bit, quick coupling, 230 mm, 2 ea.
Depth Gauge for small screws
Bending Iron for 3.5 mm and 4.5 mm Reconstruction Plates, 2 ea.
Bending Pliers for 2.7 mm and 3.5 mm Reconstruction Plates
Bending Template, 22 holes, for 3.5 mm Reconstruction Plates
Bending Template, 22 holes, for 3.5 mm Curved Reconstruction Plates
Bending Template, 16 holes, for 4.5 mm Reconstruction Plates
5/11
1-107
306.20
204.655
204.710
214.872
214.910
216.115
216.120
217.115
217.120
218.045
218.060
224.02
229.33
229.34
229.44
245.00
245.19
245.30
245.35
Plates
and Screws
5/11
1-108
Plates
and Screws
306.05
393.10
398.52
398.53
398.54
398.55
398.71
398.73
398.74
398.75
398.84
398.85
398.86
398.87
398.88
398.89
399.98
Instruments
Universal Chuck with T-Handle
Medium Bone Hook
Large Bone Hook
Straight Ball Spike
Blunt Pelvic Retractor
Spiked Disk, 4 ea.
Asymmetric Pelvic Reduction Forceps
Small Pelvic Forceps, for use with screws, 190 mm, 2 ea.
Medium Pelvic Forceps, for use with screws, 250 mm
Pelvic Reduction Forceps, angled, with pointed-ball tips, 200 mm
Pelvic Reduction Forceps, angled, with pointed-ball tips, 240 mm
Pelvic Reduction Forceps, with pointed-ball tips, 400 mm
Pelvic Reduction Forceps, with three pointed-ball tips, 400 mm
Pelvic Reduction Forceps, used with screws, 330 mm
Pelvic Reduction Forceps, with pointed-ball tips, 250 mm
Reduction Forceps, with points, 205 mm, ratchet, 2 ea.
294.68
Implants
6.0 mm Schanz Screw, 190 mm, diamond point, 4 ea.
5/11
1-109
60.108.004
292.79
03.010.150
03.010.151
03.108.001
03.108.002
03.108.003
03.108.004
03.108.005
03.108.006
03.108.007
03.108.008
03.108.009
03.108.010
310.25
310.284
310.31
310.430
312.28
312.46
314.03
314.070
314.115
314.116
319.01
319.10
333.060
333.070
333.080
333.683
397.705
399.122
399.124
511.770
511.771
Instruments
2.0 mm Kirschner Wire with Thread, 150 mm, trocar point, 15 mm thread length
Star/HexDrive Screwdriver, T25, 3.5 mm Hexagonal, self-retaining
Star/HexDrive Screwdriver Shaft, T25, 3.5 mm Hexagonal, self-retaining, quick coupling, 165 mm, 2 ea.
Pediatric LCP Hip Plate Guiding Block for 3.5 mm Screws
Pediatric LCP Hip Plate Guiding Block for 5.0 mm Screws
Direct Measuring Device, for 2.8 mm Kirschner Wires
Reduction Sleeve 4.3 mm/2.8 mm, 2 ea.
2.8 mm Kirschner Wire, spade point, 200 mm, 8 ea.
Positioning Device for Guiding Block
Medialization Guide for 3.5 mm and 5.0 mm LCP Plates, 2 ea.
Osteotomy Measuring Device
2.8 mm Threaded Drill Guide, for 3.5 mm Pediatric LCP Hip Plate, 2 ea.
4.3 mm Threaded Drill Guide, for 5.0 mm Pediatric LCP Hip Plate, 2 ea.
2.5 mm Drill Bit, quick coupling, 110 mm, gold, 2 ea.
2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.
3.2 mm Drill Bit, quick coupling, 145 mm, 2 ea.
4.3 mm Drill Bit, quick coupling, 221 mm, 2 ea.
3.5 mm/2.5 mm Double Drill Sleeve
4.5 mm/3.2 mm Double Drill Sleeve
Small Hexagonal Screwdriver Shaft, quick coupling, 2 ea.
Small Hexagonal Screwdriver, 2.5 mm width across flats, for use with Holding Sleeve (314.09)
StarDrive Screwdriver, T15, self-retaining
StarDrive Screwdriver Shaft, T15, self-retaining, quick coupling, 2 ea.
Depth Gauge, measures up to 60 mm
Depth Gauge, measures up to 110 mm
90/50/40 Triangular Positioning Plate
80/70/30 Triangular Positioning Plate
100/60/20 Triangular Positioning Plate
Adjustable Wire Guide, for use with 1.6 mm to 2.0 mm Guide Wires
Handle, quick coupling, for ComPact Air Drive Connection
Bone Holding Forceps, Soft Ratchet, for plates to 19 mm wide
Reduction Forceps with serrated jaw, large handle, Soft Ratchet
Torque Limiting Attachment, 1.5 Nm
Torque Limiting Attachment, 4 Nm
Plates
and Screws
5/11
1-110
Plates
and Screws
60.108.005
319.97
Instrument
Screw Forceps
02.108.310
02.108.311
02.108.313
02.108.315
02.108.320
02.108.321
02.108.323
02.108.325
Implants
Pediatric LCP Hip Plates
3.5 mm, 100, 4 ea.
3.5 mm, 110, 4 ea.
3.5 mm, 120, 2 ea.
3.5 mm, 150, 2 ea.
5.0 mm, 100, 4 ea.
5.0 mm, 110, 4 ea.
5.0 mm, 120, 2 ea.
5.0 mm, 150, 2 ea.
204.820
204.840
212.106
212.124
212.205
212.224
214.822
214.844
Also available: Pediatric LCP Hip Plate System Plates Only Set (01.108.006) with the Pediatric LCP Hip Plates in Graphic Case
60.108.006
5/11
1-111
690.364
292.20
292.652
292.722
310.25
310.31
311.32
311.44
311.46
312.20
314.03
314.070
314.09
314.11
314.15
314.27
319.04
319.10
319.17
319.21
319.26
319.27
Plates
and Screws
319.35
319.36
321.12
321.20
323.36
323.46
332.09
332.173
332.174
332.175
332.20
332.21
332.352
332.353
332.354
332.355
332.356
333.060
333.070
333.080
333.683
359.204
399.42
5/11
1-112
Plates
and Screws
690.365.30
690.365.40
690.365.50
690.365.60
204.814
204.830
Implants
3.5 mm Cortex Screws, self-tapping
8 ea.: 14, 16, 18, 20, 22, 24, 26, 28 and 30 mm
214.816
214.832
235.170,
235.190
236.001
236.002
236.011
236.012
236.013
235.600
235.680
235.700
235.720
235.780
236.101
236.102
90 Child Osteotomy Plates, 8 mm displacement
236.103
2 ea.: 35 mm and 45 mm blades
236.104
236.111
100 Child Osteotomy Plates, 8 mm displacement 236.112
2 ea.: 35 mm and 45 mm blades
236.113
236.114
90 Adolescent Osteotomy Plates
50 mm blade, 10 mm displacement, 2 ea.
40 mm blade, 10 mm displacement, 2 ea.
236.250
50 mm blade, 15 mm displacement, 2 ea.
236.260
60 mm blade, 15 mm displacement, 2 ea.
236.350
40 mm blade, 15 mm displacement, 2 ea.
236.360
235.601
235.681
235.701
235.721
235.781
235.270,
235.290
235.370,
235.390
236.400,
236.430
5/11
1-113
60.161.200
03.161.200
03.161.201
03.311.007
314.14
325.010
325.020
325.041
325.070
325.100
325.150
325.160
328.011
328.020
328.040
328.041
328.044
328.100
328.130
328.150
328.160
390.005
390.031
394.86
395.786
Instruments
Extraction Chisel Shaft
Extraction Chisel Tip
8 mm/11 mm Wrench
Large Hexagonal Key, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Soft Tissue Retractor, small, extendible
Reduction Handle, toothed, for 3.0 mm Threaded Rod, 2 ea.
Clamping Foot
8.0 mm Protection Sleeve, slotted
8.0 mm/3.0 mm Drill Sleeve
Adjusting Nut, for 3.0 mm Threaded Rod, 2 ea.
3.0 mm Threaded Rod, 270 mm, self-drilling tip, 4 ea.
Small Soft Tissue Retractor Blade, long
Reduction Handle, toothed, for 5.0 mm Threaded Rod, 2 ea.
Plate Holder
Clamping Foot
Connecting Screw
11.0 mm Protection Sleeve, slotted
11.0 mm/5.0 mm Drill Sleeve
Adjusting Nut, for 5.0 mm Threaded Rod, 2 ea.
5.0 mm Threaded Rod, 380 mm, self-drilling tip, 4 ea.
Large Combination Clamp, 2 ea.
Medium Combination Clamp, 2 ea.
11.0 mm Carbon Fiber Rod, 350 mm
8.0 mm Carbon Fiber Rod, 240 mm
Plates
and Screws
5/11
1-114
Plates
and Screws
60.161.201
02.161.210
02.161.222
Implants
3.5 mm Curved Narrow LCP Plates
1022 holes (2 hole increments)
02.161.240
02.161.252
02.161.270
02.161.290
Also available: 4.5 mm Curved Broad LCP Plates, 1218 holes (226.622.682)
4.5 mm Curved Broad LCP Plates, 2026 holes (226.702S.762S)
5/11
1-115
01.120.705
01.120.706
01.120.707
60.120.710
60.120.711
Plates
and Screws
01.120.704 3.5 mm LCP Tibial Plateau Instrument and Implant Set,with Proximal Tibia Low Bend,
Medial and Posteromedial Plates, and 3.7 mm Cannulated Locking and Conical Screws
5/11
1-116
Plates
and Screws
01.120.706
01.120.707
01.120.708
60.120.710
60.120.711
Also available: Single Level and Two Level Graphic Case Bases (690.911 and 690.912)
Screw Rack for 3.7 mm Cannulated Locking and Cannulated Conical Screws (60.240.017)
Instrument Tray for 3.7 mm Cannulated Locking and Cannulated Conical Screws (60.240.021)
See the following pages for detailed set configurations.
5/11
1-117
60.120.705
03.240.001
03.240.002
310.65
314.114
319.26
319.35
360.266
900.601
Instruments
Direct Measuring Device for 3.7 mm Cannulated Locking Screw
Cannulated StarDrive Screwdriver Shaft, T15, self-retaining, quick coupling, 150 mm
3.2 mm Cannulated Drill Bit, quick coupling, 170 mm, 2 ea.
Cannulated StarDrive Screwdriver, T15, for 3.7 mm Cannulated Locking Screws
1.75 mm Cleaning Brush
1.6 mm Cleaning Stylet
1.6 mm Wire Guide, for 3.7 mm Cannulated Locking Screws, 4 ea.
1.6 mm Drill Tip Guide Wire, 150 mm, 12 ea.
02.240.010
02.240.095
Implants
3.7 mm Cannulated Locking Screws
6 ea.: 10 mm40 mm (2 mm increments), 65 mm95 mm (5 mm increments)
12 ea.: 42 mm60 mm (2 mm increments)
02.240.210
02.240.295
Plates
and Screws
5/11
1-118
Plates
and Screws
60.120.706
02.120.701
02.120.702
02.120.704
02.120.706
02.120.708
02.120.710
239.954
239.955
239.956
239.957
239.958
239.959
239.960
239.961
239.962
239.963
239.964
239.965
239.966
239.967
239.968
239.969
239.970
239.971
5/11
1-119
60.120.707
Tray for 3.5 mm LCP Proximal Tibia and Proximal Tibia Low Bend plates
319.09
324.214
Instruments
Depth Gauge for small screws
2.8 mm Percutaneous Drill Bit, quick coupling, 200 mm, 100 mm calibration, 2 ea.
02.124.200
02.124.201
02.124.204
02.124.205
02.124.208
02.124.209
02.124.212
02.124.213
02.124.216
02.124.217
02.124.220
02.124.221
02.124.224
02.124.225
Implants
3.5 mm LCP Proximal Tibia Plates, Low Bend
Holes
Length
(mm)
4
76
right
4
76
left
6
102
right
6
102
left
8
128
right
8
128
left
10
154
right
10
154
left
12
180
right
12
180
left
14
206
right
14
206
left
16
232
right
16
232
left
212.125
212.131
212.325
212.331
212.425
212.431
Plates
and Screws
01.120.707 3.5 mm LCP Proximal Tibia Plate Tray with Low Bend Plates and
3.5 mm Locking and Conical Screws
5/11
1-120
Plates
and Screws
60.120.708
292.20
310.25
310.35
310.89
311.43
312.648
314.116
319.01
319.97
323.36
324.024
324.214
399.98
511.773
Instruments
2.0 mm Kirschner Wire, trocar point, 150 mm, 10/pkg.
2.5 mm Drill Bit, quick coupling, 110 mm, gold, 2 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink
Handle, with quick coupling
2.8 mm Threaded Drill Guide, 4 ea.
StarDrive Screwdriver Shaft, T15, quick coupling, 2 ea.
Depth Gauge, for small screws, measures up to 60 mm
Screw Forceps
3.5 mm Universal Drill Guide
Push-Pull Reduction Device
2.8 mm Percutaneous Drill Bit, quick coupling, 200 mm, 100 mm calibration, 2 ea.
Reduction Forceps, with points, ratchet, 200 mm, 2 ea.
Torque Limiting Attachment, 1.5 Nm, quick coupling
02.200.012
02.200.060
Implants
3.5 mm Cortex Screws, self-tapping, with StarDrive recess
2 ea.: 12 mm, 14 mm
4 ea.: 16 mm50 mm (2 mm increments), 55 mm and 60 mm
212.106
212.122,
02.212.054
02.212.058,
212.124
5/11
1-121
690.392
324.214
Instrument
2.8 mm Percutaneous Drill Bit, quick coupling, 200 mm, 100 mm calibration, 2 ea.
212.125
212.131
212.325
412.125
412.131
412.325
412.425
212.431
239.954
239.955
239.956
239.957
239.958
239.959
239.960
239.961
239.962
239.963
239.964
239.965
239.966
239.967
239.968
239.969
239.970
239.971
212.331
212.425
412.331
Plates
and Screws
412.431
439.954
439.955
439.956
439.957
439.958
439.959
439.960
439.961
439.962
439.963
439.964
439.965
439.966
439.967
439.968
439.969
439.970
439.971
Also available: 3.5 mm LCP Posteromedial Proximal Tibia Plate Sets (01.120.700S) and Titanium (01.120.710S)
Illustrations not actual size
R
5/11
1-122
Plates
and Screws
690.390
319.09
324.214
Instruments
Depth Gauge, for small screws
2.8 mm Percutaneous Drill Bit, quick coupling, 200 mm, 100 mm calibration, 2 ea.
02.124.200
02.124.201
02.124.204
02.124.205
02.124.208
02.124.209
02.124.212
02.124.213
02.124.216
02.124.217
02.124.220
02.124.221
02.124.224
02.124.225
212.125
212.131
212.325
212.331
212.425
212.431
5/11
1-123
690.390
690.391
319.09
324.214
Instruments
Depth Gauge, for small screws
2.8 mm Percutaneous Drill Bit, quick coupling
200 mm, 100 mm calibration, 2 ea.
239.934
239.935
239.936
239.937
239.938
239.939
239.940
239.941
239.942
239.943
239.944
239.945
239.946
239.947
212.125
212.126
212.127
212.128
212.129
212.130
212.131
439.934
439.935
439.936
439.937
439.938
439.939
439.940
439.941
439.942
439.943
439.944
439.945
439.946
439.947
412.125
412.126
412.127
412.128
412.129
412.130
412.131
Plates
and Screws
Also available: Screw Racks (690.397) and 690.398) included in graphic cases (690.390) and (690.391) respectively.
3.5 mm LCP Medial Proximal Tibia Plates (239.954.971) and
3.5 mm Titanium LCP Medial Proximal Tibia Plates (439.954.971)
Illustrations not actual size
R
5/11
1-124
Plates
and Screws
304.314
304.316
304.317
304.318
310.02
310.23
310.37
310.48
311.33
311.48
319.09
329.903
329.904
Instruments
3.2 mm Drill Bit, quick coupling, 225 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 180 mm, gold, 2 ea.
3.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
Tap for 3.5 mm Cortex Screws, 180 mm, gold
Tap for 4.5 mm Cortex Screws, 180 mm
Depth Gauge for small screws
Bending Template for 3.5 mm Proximal Tibia Plates
Bending Template for 4.5 mm Proximal Tibia Plates
241.004
241.017
240.002
240.015
240.019
204.855
204.890
207.055,
207.060
214.872
214.890
218.045
218.080
Implants
3.5 mm Proximal Tibia Plates
1 ea.: 4, 6, 8, 10, 12, 14 and 16 holes, right and left
4.5 mm Proximal Tibia Plates
1 ea.: 2, 4, 6, 8, 10, 12 and 14 holes, right and left
3.5 mm/4.5 mm Washer, 6 ea.
3.5 mm Cortex Screws, self-tapping
4 ea.: 55, 60, 65, 70, 75, 80, 85 and 90 mm
4.0 mm Cancellous Bone Screws, partially threaded
4 ea.: 55 mm and 60 mm
4.5 mm Cortex Screws, self-tapping
4 ea.: 72, 76, 80, 85 and 90 mm, self-tapping
6.5 mm Cancellous Bone Screws, fully threaded
4 ea.: 45, 50, 55, 60, 65, 70, 75 and 80 mm
Also available: 3.5 mm Proximal Tibia Plate Implant Set (105.252) in Implant Tray (304.316), includes template (329.903)
4.5 mm Proximal Tibia Plate Implant Set (105.253) in Implant Tray (304.317), includes template (329.904)
and washers (240.019). Proximal Tibia Plate Implant Screw Set (105.254) in Screw Tray (304.318)
Proximal Tibia Plate Instrument Set (105.255)
With Graphic Case and extra-long instruments (does not include templates)
Illustrations not actual size
5/11
1-125
3.5 mm LCP Medial Distal Tibia Plate without Tab Implant Sets
690.468
60.122.001
3.5 mm LCP Medial Distal Tibia Plate without Tab Set Graphic Case
3.5 mm Titanium LCP Medial Distal Tibia Plate without Tab Set Graphic Case
238.700
238.701
238.702
238.703
238.704
238.705
238.706
238.707
238.708
238.709
238.710
238.711
438.700
438.701
438.702
438.703
438.704
438.705
438.706
438.707
438.708
438.709
438.710
438.711
Also available: Small Fragment LCP Instrument and Implant Set (105.434),
Small Fragment LCP Instrument and Titanium Implant Set (145.434)
5/11
Plates
and Screws
01.122.001 3.5 mm LCP Medial Distal Tibia Plate without Tab Implant Set
01.122.002 3.5 mm Titanium LCP Medial Distal Tibia Plate without Tab Implant Set
1-126
Plates
and Screws
690.352
690.353
223.506
223.508
223.510
223.512
223.514
223.516
223.518
223.507
223.509
223.511
223.513
223.515
223.517
223.519
224.506
224.508
224.510
224.512
224.514
224.507
224.509
224.511
224.513
224.515
423.506
423.508
423.510
423.512
423.514
423.516
423.518
423.507
423.509
423.511
423.513
423.515
423.517
423.519
424.506
424.508
424.510
424.512
424.514
424.507
424.509
424.511
424.513
424.515
5/11
1-127
3.5 mm LCP Medial Distal Tibia Plate Instrument and Implant Set
690.376
391.963
Instrument
Universal Bending Pliers
239.900
239.901
239.904
239.905
239.908
239.909
239.912
239.913
239.916
239.917
239.920
239.921
Implants
3.5 mm LCP Medial Distal Tibia Plates
4 holes, 116 mm, right
4 holes, 116 mm, left
6 holes, 142 mm, right
6 holes, 142 mm, left
8 holes, 168 mm, right
8 holes, 168 mm, left
10 holes, 194 mm, right
10 holes, 194 mm, left
12 holes, 220 mm, right
12 holes, 220 mm, left
14 holes, 246 mm, right
14 holes, 246 mm, left
Plates
and Screws
115.358 3.5 mm LCP Medial Distal Tibia Plate Instrument and Implant Set
Also available: Small Fragment LCP Instrument and Implant Set (105.434)
5/11
1-128
Plates
and Screws
690.469
60.124.002
241.440
241.441
241.442
241.443
241.444
241.445
241.446
241.447
241.448
241.449
241.450
241.451
241.452
241.453
241.454
241.455
241.456
241.457
441.440
441.441
441.442
441.443
441.444
441.445
441.446
441.447
441.448
441.449
441.450
441.451
441.452
441.453
441.454
441.455
441.456
441.457
Also available: Small Fragment LCP Instrument and Implant Set (105.434),
2.8 mm LCP Drill Guide, long (03.122.001), and 2.8 mm Drill Bit (03.122.002)
5/11
1-129
304.899
489.402
Plates
and Screws
489.403
489.412
489.413
489.415
489.424
5/11
1-130
Plates
and Screws
690.552
329.606
329.607
329.608
329.609
391.962
391.963
Instruments
Combination Bending Pliers
Locking Calcaneal Plate Cutter
Locking Calcaneal Plate Tab Bending Pliers
Bending Templates for Locking Calcaneal Plates
Mini
Short
Long
Extra Long
Bending/Cutting Pliers
Universal Bending Pliers
241.618
241.619
241.622
241.623
241.624
241.625
241.626
241.627
Implants
Locking Calcaneal Plates
Mini, right
Mini, left
Short, right
Short, left
Long, right
Long, left
Extra Long,right
Extra Long, left
329.142
329.151
329.155
Also available: Small Fragment LCP Instrument and Implant Set (105.434)
2.7 mm and 3.5 mm Cortex Screws, 3.5 mm Locking Screws,
Calcaneal Plates (241.61) and (241.62) and Calcaneal Y-Plate (241.65)
5/11
1-131
690.550
292.16
292.20
310.21
310.23
310.28
310.288
310.35
311.43
312.648
314.02
314.03
314.115
314.116
241.618
241.619
241.622
241.623
241.624
241.625
241.626
241.627
Plates
and Screws
01.106.012 Locking Calcaneal Plate and Screw Instrument and Implant Set
Graphic Case with Screw Rack, for Locking Calcaneal Plate Set
Instruments
1.6 mm Kirschner Wire, trocar point, 150 mm
1 pkg. of 10
2.0 mm Kirschner Wire, trocar point, 150 mm
1 pkg. of 10
Drill Bits, quick coupling, 2 ea.
2.0 mm, 125 mm
2.5 mm, gold, 180 mm
2.7 mm, 125 mm
2.8 mm, 165 mm
3.5 mm, 110 mm
Handle, with quick-coupling
2.8 mm Threaded Drill Guide, 2 ea.
Small Hexagonal Screwdriver with Holding Sleeve
Small Hexagonal Screwdriver with Shaft,
quick-coupling
StarDrive Screwdriver, T15, self-retaining
StarDrive Screwdriver Shaft, T15, self-retaining,
quick-coupling
Implants
Locking Calcaneal Plates
Mini, right
Mini, left
Short, right
Short, left
Long, right
Long, left
Extra Long,right
Extra Long, left
319.01
319.97
323.26
323.36
324.023
329.142
329.151
329.155
329.606
329.607
329.608
329.609
391.962
391.963
511.773
Bending/Cutting Pliers
Universal Bending Pliers
Torque Limiting Attachment, 1.5 Nm,
quick-coupling
202.816
202.855
212.105
212.121
5/11
1-132
Plates
and Screws
304.391
310.229
310.40
310.401
311.400
312.401
206.414
206.500
5/11
1-133
690.495
Graphic Case, for 4.0 mm Cannulated Screw Instrument and Implant Set
292.62
292.626
310.67
310.86
311.43
311.63
312.35
314.03
314.08
314.10
314.29
319.15
319.25
319.38
319.97
Instruments
1.25 mm Threaded Guide Wire, 150 mm (10/pkg.), 2 pkg.
1.25 mm Nonthreaded Guide Wire, 150 mm (10/pkg.), 1 pkg.
2.7 mm Cannulated Drill Bit, quick coupling, 160 mm, 2 ea.
Cannulated Countersink
Handle with quick coupling
Cannulated Tap
2.7 mm/1.25 mm Double Drill Sleeve
Small Hexagonal Screwdriver Shaft
Holding Sleeve, for Cannulated Screwdriver Shaft (314.29)
Cannulated Hexagonal Screwdriver Shaft
Cannulated Hexagonal Screwdriver
Cannulated Screw Measuring Device
1.35 mm Cleaning Brush
1.25 mm Cleaning Stylet
Screw Forceps
207.610
207.650
219.98
407.610
407.650
419.98
Plates
and Screws
Also available: 4.0 mm Cannulated Screws, long thread (stainless steel and titanium)
5/11
1-134
Plates
and Screws
60.240.201
60.240.203
60.240.204
60.240.205
60.240.206
60.240.208
292.652
310.243
310.31
310.431
310.44
310.632
310.634
310.99
311.44
311.449
311.46
312.449
312.48
313.93
314.05
314.11
314.23
319.24
319.461
319.701
321.12
321.16
323.46
324.174
324.175
324.176
338.49
397.706
03.010.150
03.010.151
319.10
511.774
Holding Sleeve
Cannulated Hexagonal Screwdriver Shaft,
4.0 mm across flats
2.9 mm Cleaning Brush
2.5 mm Cleaning Stylet
Cannulated Screw Measuring Device
Articulated Tension Device
Combination Wrench,
11 mm width across flats
4.5 mm Universal Drill Guide
2.5 mm Wire Guide for 5.0 mm screws, 5 ea.
2.5 mm Wire Guide for 7.3 mm screws, 2 ea.
3.2 mm Drill Guide for 4.0 mm screws, 2 ea.
Large Quick Coupling
Handle, for AO reaming coupler connection
Star/HexDrive Screwdriver, T25/3.5 mm
Star/HexDrive Screwdriver Shaft, T25/3.5 mm
Depth Gauge, for 4.5 mm and 6.5 mm screws
Torque Limiting Attachment, 4Nm,
for AO Reaming Coupler
5/11
1-135
214.814
214.870
02.205.240
02.205.295
222.578
02.221.508
02.221.512
02.207.020
02.207.145
212.201
212.227
02.207.250
02.207.295
02.207.450
02.207.495
02.205.025
02.205.145
414.814
414.870
04.221.508
04.221.512
412.201
412.227
04.205.025
04.205.095
04.205.240
5.0 mm Titanium Periprosthetic Locking Screws04.205.295
2 ea.: 8 mm12 mm
222.578
5.0 mm Titanium Locking Screws
4 ea.: 14 mm24 mm
6 ea.: 26 mm42 mm
2 ea.: 44 mm90 mm
Plates
and Screws
01.240.201 Periarticular LCP Plating System, with 5.0 mm Locking Screws continued
01.240.401 Periarticular LCP Plating System, with 5.0 mm Titanium Locking Screws
Also available: Periarticular LCP Plating System Instrument and Screw Sets (105.210) and (01.223.604)
4.5 mm LCP Condylar Plate Implant Sets (105.221) and (01.006.002)
4.5 mm LCP Proximal Tibia Plate Implant Sets (105.222) and (01.123.604)
4.5 mm LCP Proximal Femur Plate Sets (105.272) and (105.273)
5.0 mm Locking Screws and 5.0 mm Periprosthetic Locking Screws (in screw rack 60.240.204) are also sold in
5.0 mm Locking Screw Sets with T25 StarDrive Recess, self-tapping (01.240.204 and 01.240.404)
5/11
1-136
Plates
and Screws
60.240.201
60.240.202
60.240.203
60.240.205
60.240.206
60.240.208
292.652
03.010.150
03.010.151
310.243
310.31
310.431
310.44
310.632
310.634
310.99
311.44
311.449
311.46
312.449
312.48
313.93
314.05
314.11
314.23
319.10
319.24
319.461
Locking Periarticular Plating System Graphic Case, includes base and lid
Screw Rack for 4.0 mm Locking Screws, self-tapping with T25 StarDrive Recess, 14 mm62 mm
Screw Rack for 4.5 mm Cortex Screws, 14 mm70 mm
Screw Rack, for 5.0 mm and 7.3 mm Cannulated Locking Screws and 7.3 mm Conical Screws
Screw Rack for 5.0 mm Cannulated Conical Screws, 40 mm95 mm includes space for 2 screw nuts
Locking Periarticular Plating System Instrument Tray
Instruments in both sets
2.0 mm Non-Colored Threaded Guide Wire, 230 mm, spade point, 10 ea.
Star/HexDrive Screwdriver, T25, 3.5 mm Hexagonal, self-retaining
Star/HexDrive Screwdriver Shaft, T25, 3.5 mm Hexagonal, self-retaining
2.5 mm Drill Tip Guide Wire, 200 mm, 10 ea.
3.2 mm Drill Bit, quick coupling, 145 mm
4.3 mm Drill Bit, quick coupling, 180 mm, for 5.0 mm Locking Screws
4.5 mm Drill Bit, quick coupling, 145 mm
5.0 mm Cannulated Drill Bit, quick coupling, 200 mm, 2.6 mm cannulation, for use with 7.3 mm screws
4.3 mm Cannulated Drill Bit, quick coupling, 200 mm, 2.6 mm cannulation, for use with 5.0 mm screws
Countersink
T-Handle, with quick coupling
Push-Pull Reduction Device, 2 ea.
Tap for 4.5 mm Cortex and 4.5 mm Shaft Screws, 130 mm/57 mm tap depth
4.3 mm Threaded Drill Guide, 4 ea.
4.5 mm/3.2 mm Insert Drill Sleeve
Solid Hexagonal Screwdriver, 4.0 mm width across flats, for removal of 7.3 mm Cannulated Screws
Cannulated Hexagonal Screwdriver, 2.9 mm cannulation, 4.0 mm width across flats
Holding Sleeve, for use with hexagonal screwdrivers,
Cannulated Hexagonal Screwdriver Shaft, 2.9 mm cannulation, 4.0 mm width across flats, 270 mm, for use
with 7.3 mm Cannulated Screws
Depth Gauge, measures up to 110 mm
2.9 mm Cleaning Brush
2.5 mm Cleaning Stylet
Illustrations not actual size
5/11
1-137
319.701
321.12
321.16
323.46
324.174
324.175
324.176
338.49
397.706
511.774
02.204.014
02.204.062
04.204.014
04.204.062
02.205.025
02.205.145
04.205.025
04.205.145
02.205.240
02.205.295
04.205.240
04.205.295
02.207.020
02.207.145
04.207.020
04.207.145
02.207.250
02.207.295
04.207.250
04.207.295
02.207.450
04.207.450
214.814
214.870
414.814
414.870
222.578
422.578
02.207.495
Plates
and Screws
01.240.209 Periarticular LCP Plating System with 4.0 mm Locking Screws continued
01.240.409 Periarticular LCP Plating System with 4.0 mm Titanium Locking Screws
04.207.495
Also available: Instrument and screw sets are also sold separately in the following configurations:
Instruments in Periarticular LCP Plating System Instrument and Screw Set
Instrument Tray and Instruments (01.240.208)
4.0 mm Locking Screws with T25 StarDrive Recess in sets 01.240.202 and 01.240.402
with screw rack 60.240.202
4.5 mm Cortex Screws in sets 01.240.203 and 01.240.403 with screw rack 60.240.203
5.0 mm Cannulated Conical Screws in sets 01.240.206 and 01.240.406
with screw rack 60.240.206 and screw nut (222.578 or 422.578)
5.0 mm/7.3 mm Cannulated Locking Screws with 7.3 mm Cannulated Conical
Screw Set (01.240.205) with screw rack 60.240.205
5.0 mm Titanium Cannulated Locking Screw Set (01.240.405) with screw rack 60.240.205
Illustrations not actual size
R
5/11
1-138
Plates
and Screws
60.240.212
Screw Rack for 4.0 mm Locking Screws, self-tapping with hexagonal recess, 14 mm62 mm
222.580
222.581
222.582
02.204.420
222.583
02.204.424
222.584
02.204.428
222.585
02.204.432
222.586
02.204.436
222.587
02.204.440
222.588
02.204.444
222.589
02.204.448
222.590
02.204.452
222.591
02.204.456
222.592
02.204.460
222.593
Implants
4.0 mm Locking Screws
14 mm, 4 ea.
16 mm, 4 ea.
18 mm, 4 ea.
20 mm, 4 ea.
22 mm, 4 ea.
24 mm, 4 ea.
26 mm, 6 ea.
28 mm, 6 ea.
30 mm, 6 ea.
32 mm, 6 ea.
34 mm, 6 ea.
36 mm, 6 ea.
38 mm, 6 ea.
40 mm, 6 ea.
42 mm, 6 ea.
44 mm, 3 ea.
46 mm, 3 ea.
48 mm, 3 ea.
50 mm, 3 ea.
52 mm, 3 ea.
54 mm, 3 ea.
56 mm, 3 ea.
58 mm, 3 ea.
60 mm, 3 ea.
62 mm, 3 ea.
5/11
1-139
60.240.207
216.050
216.095
217.050
217.095
218.050
218.095
416.050
416.095
417.050
417.095
418.050
418.095
5/11
1-140
Plates
and Screws
690.363
314.15
314.27
319.10
319.39
321.12
321.15
323.021
323.046
323.46
324.075
397.706
511.774
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
3.2 mm Drill Bit, quick coupling, 145 mm, 2 ea.
4.3 mm Drill Bit, quick coupling, 180 mm, for 5.0 mm Locking Screws, 2 ea.
4.5 mm Drill Bit, quick coupling, 145 mm, 2 ea.
Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
T-Handle, with quick coupling
Push-Pull Reduction Device, for use with 4.5 mm LCP Plates, 2 ea.
Tap for 4.5 mm Cortex and Shaft Screws, 2 ea.
Tap for 6.5 mm Cancellous Bone Screws, 2 ea.
3.2 mm Threaded Drill Guide, 2 ea.
4.3 mm Threaded Drill Guide, 4 ea.
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm/3.2 mm Insert Drill Sleeve
6.5 mm/3.2 mm Double Drill Sleeve
Holding Sleeve
StarDrive Screwdriver, T25, self-retaining, 245 mm
StarDrive Screwdriver Shaft, T25, self-retaining, 165 mm
for 4.0 mm and 5.0 mm Locking Screws
Large Hexagonal Screwdriver Shaft, quick coupling
Large Hexagonal Screwdriver
Depth Gauge, for 4.5 mm Cortex, 4.5 mm Shaft and 6.5 mm Cancellous Bone Screws
Sharp Hook
Articulated Tension Device, with gauge
Socket Wrench with universal joint, 11 mm width across flats
Direct Measuring Device, for 5.0 mm Locking Screws
2.0 mm Wire Sleeve, for 4.3 mm Threaded Drill Guide, 2 ea.
4.5 mm Universal Drill Guide
Threaded Plate Holder, for 5.0 mm locking hole
Handle, for AO Reaming Coupler Connection
Torque Limiting Attachment, 4 Nm, for AO Reaming Coupler
292.656
Implants
2.0 mm Non-Threaded Guide Wire, spade point, 230 mm, 10 ea.
310.19
310.31
310.431
310.44
310.99
311.44
311.449
311.46
311.66
312.445
312.449
312.46
312.48
312.67
314.11
314.118
314.119
Also available: Large Fragment LCP Instrument and Implant Set with 4.0 mm and 5.0 mm Locking Screws (115.400), consists
of sets 115.401, 115.402 and 115.403
Large Fragment LCP Instrument and Implant Set with 5.0 mm Locking Screws (115.405)
Large Fragment LCP Instrument and Titanium Implant Set with 4.0 mm and 5.0 mm
Locking Screws (146.400) consists of sets 115.401, 146.402 and 146.403
Large Fragment LCP Instrument and Titanium Implant Set with 5.0 mm Locking Screws (146.405)
Illustrations not actual size
5/11
1-141
690.360
690.420
Large Fragment LCP Implant Set Graphic Case (for Set 115.402)
Large Fragment Titanium LCP PlateSet Graphic Case (for Set 146.402)
329.92
329.97
329.99
Instruments
Bending Template, 12 holes
Bending Template, 7 holes
Bending Template, 9 holes
224.541
224.551
224.561
224.571
224.581
224.591
224.601
224.611
224.621
224.641
224.661
424.541
424.551
424.561
424.571
424.581
424.591
424.601
424.611
424.621
424.641
424.661
226.561
226.571
226.581
226.591
226.601
226.611
226.621
226.641
226.661
426.561
426.571
426.581
426.591
426.601
426.611
426.621
426.641
426.661
240.141
240.161
240.181
440.141
440.161
440.181
Plates
and Screws
Also available: Large Fragment LCP Instrument Set (115.401) and Large Fragment LCP Screw Sets (115.403) and (146.403)
4.5 mm Curved Broad LCP Plates and additional lengths of 4.5 mm Narrow LCP and
4.5 mm Broad LCP Plates (stainless steel and titanium)
Illustrations not actual size
R
5/11
1-142
Plates
and Screws
690.362
690.425
319.97
Stainless Steel
Implants
in set 115.403
212.201
212.227
Titanium
Implants
in set 146.403
412.201
412.227
214.228
214.250
414.228
414.250
214.814
214.870
414.814
414.870
216.030
216.110
416.030
416.110
217.045
217.110
417.045
417.110
218.025
218.060
418.025
418.060
02.204.014
02.204.062
04.204.014
04.204.062
219.99
419.99
5/11
1-143
690.336
310.19
310.31
310.44
310.99
311.44
311.46
311.66
312.46
312.48
312.67
314.11
314.15
314.27
319.10
319.39
321.12
321.15
321.16
322.44
323.45
323.46
329.92
329.97
329.99
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
3.2 mm Drill Bit, quick coupling, 145 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 145 mm, 2 ea.
Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and 4.5 mm Shaft Screws, 130 mm/57 mm tap depth, 2 ea.
Tap for 6.5 mm Cancellous Bone Screws, 197 mm/150 mm calibration
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm/3.2 mm Insert Drill Sleeve
6.5 mm/3.2 mm Double Drill Sleeve
Holding Sleeve
Large Hexagonal Screwdriver Shaft
Large Hexagonal Screwdriver
Depth Gauge, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Sharp Hook
Articulated Tension Device, with gauge, 20 mm span
Socket Wrench with universal joint, 11 mm width across flats
Combination Wrench, 11 mm width across flats
4.5 mm DCP Drill Guide
4.5 mm LC-DCP Drill Guide
4.5 mm Universal Drill Guide
Bending Template, 12 holes
Bending Template, 7 holes
Bending Template, 9 holes
292.20
492.20
Implants
2.0 mm Kirschner Wire, 150 mm, trocar point (10/pkg.), 1 pkg.
2.0 mm Titanium Kirschner Wire, 150 mm, trocar point (10/pkg.), 1 pkg.
Plates
and Screws
5/11
1-144
Plates
and Screws
305.055
304.405
222.04
222.07
422.04
422.07
224.54
224.62
424.54
424.62
226.56
226.64
426.56
426.64
240.14
240.18
T-Plates
1 ea.: 4, 6 and 8 holes
440.14
440.18
Titanium T-Plates
1 ea.: 4, 6 and 8 holes
240.44
240.54
440.44
440.54
5/11
1-145
305.05
222.04
222.07
Implants
Semi-Tubular Plates
2 ea: 4, 5 and 6 holes
1 ea: 7 holes
224.04
224.12
226.06
226.14
240.05,
240.06
Spoon Plates
1 ea: 5 and 6 holes
240.14
240.18
T-Plates
1 ea: 4, 6 and 8 holes
240.34
240.44
240.54
Plates
and Screws
5/11
1-146
Plates
and Screws
307.80
319.97
Instruments
Screw Forceps
214.014
214.068
Implants
4.5 mm Cortex Screws
6 ea.: 14, 16, 18, 20, 22 and 24 mm
7 ea.: 26, 28, 38, 42, 44 and 46 mm
14 ea.: 30, 32, 34, 36 and 40 mm
3 ea.: 48, 52, 56, 60, 64 and 68 mm
215.025
215.070
216.030
216.110
217.045
217.110
218.025
218.110
219.99
5/11
1-147
60.120.030
03.010.151*
03.120.001
03.120.002
03.120.003
03.120.004
03.120.005
03.120.006
03.120.008
03.120.009
03.120.010
03.120.011
03.120.012
03.120.013
03.120.014
03.120.015
03.120.016
03.120.017
03.120.018
03.120.019
03.120.020
03.120.021
03.120.022
03.120.023
03.120.026*
03.120.027
03.120.029
314.119*
319.461*
321.16
324.202*
324.203*
324.208*
324.212*
324.213*
324.215*
Instruments
Star/HexDrive Screwdriver Shaft, T25, 3.5 mm Hexagonal, self-retaining, quick coupling, 165 mm
Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plates, right
Periarticular Insertion Handle, for 4.5 mm LCP Proximal Tibia Plates, right
Oblique Aiming Guide for Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plates, right
Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plates, left
Periarticular Insertion Handle, for 4.5 mm LCP Proximal Tibia Plates, left
Oblique Aiming Guide for Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plates, left
Periarticular Insertion Handle, for 4.5 mm LCP Condylar Plates, right
Periarticular Aiming Arm, for 4.5 mm LCP Curved Condylar Plates, right
Periarticular Insertion Handle, for 4.5 mm LCP Condylar Plates, left
Periarticular Aiming Arm, for 4.5 mm LCP Curved Condylar Plates, left
Periarticular Aiming Arm, for 4.5 mm LCP Condylar Plates 18 holes, straight
Periarticular Aiming Arm, for 4.5 mm LCP Condylar Plates 8 holes, straight
Locking/Neutral Guide, self-retaining, large, 6 ea.
Trocar with Handle for use with 03.120.014
Scalpel Handle
Neutral Drill Guide, for 4.5 mm Cortex Screws
Compression Drill Guide, for 4.5 mm Cortex Screws
2.5 mm Wire Guide with Shoulder, for 7.3 mm screws, 2 ea.
Cannulated Connecting Post for 2.5 mm wires, for Periarticular Insertion Handles, 8 ea.
Nut for Cannulated Connecting Post, for 2.5 mm wires, 9 ea.
Handle for Percutaneous Threaded Drill Guides, 2 ea.
Pull Reduction Device, for 4.3 mm Percutaneous Drill Guide, 2 ea.
2.5 mm Drill Tip Guide Wire, 300 mm, 8 ea.
Interlocking Bolt, 151 mm, for Periarticular Insertion Handle, for 4.5 mm LCP Proximal Tibia Plates
4.0 mm Hexagonal Key with ball end
StarDrive Screwdriver Shaft, T25, self-retaining, quick coupling, 165 mm
2.5 mm Cleaning Stylet
Combination Wrench, 11 mm width across flats
3.2 mm Percutaneous Threaded Drill Guide, 4 ea.
4.3 mm Percutaneous Threaded Drill Guide, 4 ea.
Percutaneous Direct Measuring Device
3.2 mm Percutaneous Drill Bit, for use with 3.2 mm Percutaneous Threaded Drill Guide (324.202)
4.3 mm Percutaneous Drill Bit, for use with 4.3 mm Percutaneous Threaded Drill Guide (324.203)
2.5 mm Percutaneous Wire
Also available: LCP Periarticular Aiming Instrument Upgrade Set (01.120.033) that upgrades set 105.072 to 01.120.030.
The upgrade set includes all the instruments listed above except for the ones marked with an asterisk.
5/11
Plates
and Screws
1-148
Plates
and Screws
690.396
03.100.001
03.100.002
03.100.101
03.100.102
314.119
314.56
319.461
321.17
324.033
324.200
324.202
324.203
324.204
324.205
324.208
324.212
324.213
324.215
338.002
356.800
356.801
356.802
356.803
356.804
356.805
356.806
356.807
Instruments
Aiming Arm, for 4.5 mm LCP Proximal Tibia Plate, right
Insertion Handle, for 4.5 mm LCP Proximal Tibia Plate, right
Aiming Arm, for 4.5 mm LCP Proximal Tibia Plate, left
Insertion Handle, for 4.5 mm LCP Proximal Tibia Plate, left
StarDrive Screwdriver Shaft, T25, 165 mm
Large Hexagonal Screwdriver Shaft, long, (165 mm)
2.5 mm Cleaning Stylet
4.5 mm Pin Wrench
Pull Reduction Instrument
Percutaneous Protection Sleeve
3.2 mm Percutaneous Threaded Drill Guide, 4 ea.
4.3 mm Percutaneous Threaded Drill Guide, 4 ea.
3.2 mm Trocar Sleeve
3.2 mm Percutaneous Trocar
Percutaneous Direct Measuring Device
3.2 mm Percutaneous Drill Bit, quick coupling, 300 mm, 2 ea.
4.3 mm Percutaneous Drill Bit, quick coupling, 300 mm, 2 ea.
2.5 mm Percutaneous Wire Guide, 2 ea.
2.5 mm Drill Tip Guide Wire with 12 mm thread, 300 mm, 8 ea.
LCP Condylar Plate Aiming Arm, 8 holes
LCP Condylar Plate Aiming Arm, 18 holes
Insertion Handle, for LCP Condylar Plates
Percutaneous Thumb Screw, 6 ea.
Percutaneous Locking Neutral Guide, 6 ea.
Percutaneous Interlocking Bolt, 2 ea.
Locking Nut for Percutaneous Interlocking Bolt, 2 ea.
Percutaneous Trocar
Also available: Large Fragment LCP Instrument and Implant Set (115.400) and
Large Fragment LCP Instrument and Titanium Implant Set (146.400 )
Illustrations not actual size
5/11
1-149
690.413
391.104
391.107
391.108
391.201
391.882
391.883
391.884
391.906
Instruments
Large Cable Passer, curved
Large Cable Passer
Large Cable Passer, 45 angle
Cable Tensioner, 2 ea.
Cable Crimper
Attachment Bit , 4 ea.
Provisional Tensioning Device, 4 ea.
Cable Cutter, large
02.221.508
02.221.510
02.221.512
Implants in 01.225.602
5.0 mm Periprosthetic Locking Screws,
self-tapping, with T25 StarDrive recess, 8 ea.
8 mm
10 mm
12 mm
04.221.508
04.221.510
04.221.512
Implants in 01.225.604
5.0 mm Titanium Periprosthetic Locking Screws,
self-tapping, with T25 StarDrive recess, 8 ea.
8 mm
10 mm
12 mm
226.622
226.632
226.642
226.652
226.662
226.672
226.682
426.622
426.632
426.642
426.652
426.662
426.672
426.682
5/11
1-150
Plates
and Screws
690.325
314.15
314.27
319.10
Instruments
3.2 mm Drill Bit, quick coupling, 145 mm
4.3 mm Drill Bit, quick coupling, 180 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 145 mm
T-Handle, with quick coupling
Tap for 4.5 mm Cortex Screws,130 mm,
57 mm tap depth
4.3 mm Threaded Drill Guide, 2 ea.
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm/3.2 mm Insert Drill Sleeve
Holding Sleeve
StarDrive Screwdriver, T25, self-retaining,
245 mm
StarDrive Screwdriver Shaft, T25, self-retaining,
165 mm
Large Hexagonal Screwdriver Shaft
Large Hexagonal Screwdriver
Depth Gauge, for large screws
212.201
212.221
Implants
5.0 mm Locking Screws, self-tapping, with T25 StarDrive recess
4 ea.: 14, 16, 32, 34, 36, 38, 40, 42 and 44 mm
2 ea.: 18, 20, 22, 24, 26, 28, 30, 46, 48, 50, 55 and 60 mm
214.828
214.854
310.31
310.431
310.44
311.44
311.46
312.449
312.46
312.48
314.11
314.118
314.119
319.97
323.46
338.044
338.313
338.329
338.332
338.341
338.342
338.345
338.346
338.347
338.348
399.43
511.761
900.723
Screw Forceps
4.5 mm Universal Drill Guide
Dynamic Helical Hip System Angle Guide, variable
Solid Coupling Screw, for REMOVAL ONLY
Depth Gauge for LCP DHHS angle guide, variable
Contoured Reamer, 60 mm
LCP DHHS Inserter Guide
LCP DHHS Key Alignment Shaft
LCP DHHS Coupling Screw, 324 mm
LCP DHHS Inserter Shaft
LCP DHHS Key Impactor, cannulated, 300 mm
LCP DHHS Impactor Cap, 2 ea.
Hammer, 700 gram
Large Quick Coupling
2.5 mm Threaded Guide Wire, spade point,
230 mm, 10 ea.
5/11
1-151
690.326
282.234
282.245
Implants
Helix Blades
2 ea.: 75, 80, 85, 110, 115, 120, 125 and 130 mm
3 ea.: 90, 95, 100 and 105 mm
211.890
282.602
282.603
282.604
282.610
282.611
282.612
282.613
282.614
282.630
282.631
282.632
282.633
282.634
282.640
282.641
282.642
282.643
282.644
Plates
and Screws
Also available: LCP DHHS Basic Set (105.388), longer lengths Helix Blades,
additional lengths LCP DHHS Sideplates, and short barrel LCP DHHS Sideplates
Illustrations not actual size
R
5/11
1-152
Plates
and Screws
690.328
338.730
338.740
338.750
Instruments
4.5 mm/3.2 mm Insert Drill Sleeve
6.0 mm/4.5 mm Drill Sleeve
DHS Parallel Drill Guide
281.869
281.870
Implants
Trochanter Stabilization Plate, 138 mm, 2 ea.
Trochanter Stabilization Plate, 148 mm, 2 ea.
Also available: DHS Basic, Universal, Supplemental and One-Step Instrument and Implant Sets
(105.37, 105.837, 105.35, 105.352, 105.355, 105.839)
Insert Wire Sleeves (338.720) and (338.731)
5/11
1-153
690.348
310.31
310.44
311.44
311.46
312.46
314.11
314.15
314.27
319.10
319.97
322.43
338.047
338.05
338.08
338.13
Instruments
3.2 mm Drill Bit, quick coupling, 145 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 145 mm, 2 ea.
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and Shaft Screws, 2 ea.
4.5 mm/3.2 mm Double Drill Sleeve
Holding Sleeve
Large Hexagonal Screwdriver Shaft
Large Hexagonal Screwdriver
Depth Gauge, for large screws
Screw Forceps
4.5 mm DCP Hip Drill Guide
Variable Angle Guide, for DHS
DHS/DCS Direct Measuring Device
DHS/DCS T-Handle, quick coupling
DHS Triple Reamer, complete
214.828
214.854
292.20
338.17
338.18
338.25
338.28
338.302
338.31
338.32
338.41*
338.44
338.47*
338.730
338.740
338.750
900.723
Plates
and Screws
Implants
4.5 mm Cortex Screws, self-tapping
3 ea.: 28, 30, 48, 50, 52 and 54 mm
6 ea.: 44 mm and 46 mm
8 ea.: 32, 34, 36, 38 and 42 mm
10 ea.: 40 mm
2.0 mm Kirschner Wire, trocar point, 150 mm (10/pkg.), 1 pkg.
Also available: DHS/DCS One-Step Basic SetJC (105.833J) and DHS One-Step Basic SetJC (105.839J)
With standard drill bits 310.32 and 310.45 to fit Jacobs chuck
Coupling Screw Adaptor and Guide Shaft Adaptor, for One-Step Lag Screws (338.202) and) 338.212)
* Not included in sets 105.839 or 105.839J
Illustrations not actual size
R
5/11
1-154
Plates
and Screws
690.344
280.265
280.325
Implants
DHS/DCS One-Step Lag Screws, 12.7 mm diameter thread
1 ea.: 65, 70, 75, 80, 85, 90, 95, 100, 105, 110,
115, 120 and 125 mm
280.990
281.040
281.060
281.140
281.160
281.240
281.260
281.340
281.360
281.440
281.540
281.869,
281.870
Also available: DHS One-Step Implant Setsterile (105.352S), without graphic case
DHS Supplemental Implant Set (105.355)
5/11
1-155
304.250
304.257
310.19
310.31
310.44
311.44
311.46
312.46
312.48
314.11
314.15
314.27
319.10
319.97
322.43
214.828
214.854
292.20
Plates
and Screws
DHS/DCS Basic Set Graphic Case, for self-tapping screws (for set 105.831)
DHS/DCS Basic Set Graphic Case (for set 105.31)
Instruments
2.0 mm Drill Bit, quick coupling, 100 mm
2 ea.
3.2 mm Drill Bit, quick coupling, 145 mm
2 ea.
4.5 mm Drill Bit, quick coupling, 145 mm
2 ea.
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and
4.5 mm Shaft Screws, 2 ea.
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm/3.2 mm Insert Drill Sleeve
Holding Sleeve
Large Hexagonal Screwdriver Shaft
Large Hexagonal Screwdriver
Depth Gauge, for large screws
Screw Forceps
4.5 mm DCP Hip Drill Guide
Implants in set 105.831
4.5 mm Cortex Screws, self-tapping
3 ea.: 28, 30, 48, 50, 52 and 54 mm
6 ea.: 44 and 46 mm
8 ea.: 32, 34, 36, 38 and 42 mm
10 ea.: 40 mm
2.0 mm Kirschner Wire, 150 mm, 1 pkg. of 10
338.01
338.04
338.05
338.06
338.08
338.13
338.17
338.18
338.19
338.20
338.21
338.22
338.28
338.41
338.44
338.47
900.723
900.723LBL
214.028
214.054
292.20
Also available: DHS/DCS Basic Set with self-tapping screws (105.831J), and DHS/DCS Basic Set (105.31J)
With standard drill bits 310.20, 310.32 and 310.45 to fit Jacobs chuck
DHS/DCS Basic Screw Rack, with self-tapping screws (105.812)
DHS/DCS Basic Screw Rack, with screws (105.12) (not self-tapping)
Variable Angle Guide for DHS (338.047)
Illustrations not actual size
R
5/11
1-156
Plates
and Screws
304.250
304.257
310.19
310.31
310.44
311.44
311.46
312.46
312.48
314.11
314.15
314.27
319.10
319.97
214.828
214.854
DHS/DCS Basic Set Graphic Case, for self-tapping screws (for set 105.837)
DHS/DCS Basic Set Graphic Case (for set 105.37)
Instruments
2.0 mm Drill Bit, 100 mm,
quick coupling, 2 ea.
3.2 mm Drill Bit, 145 mm,
quick coupling, 2 ea.
4.5 mm Drill Bit, 145 mm,
quick coupling, 2 ea.
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and
4.5 mm Shaft Screws, 2 ea.
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm/3.2 mm Insert Drill Sleeve
Holding Sleeve
Large Hexagonal Screwdriver Shaft
Large Hexagonal Screwdriver
Depth Gauge, for large screws
Screw Forceps
322.43
4.5 mm DCP Hip Drill Guide
338.01 DHS Angle Guides
338.04
1 ea.: 135, 140, 145 and 150
338.05
DHS/DCS Direct Measuring Device
338.06
DHS/DCS Wrench
338.08
DHS/DCS T-Handle
338.13
DHS Triple Reamer, complete
338.17
DHS/DCS Tap, 12.5 mm dia.
338.18
DHS/DCS Centering Sleeve, short
338.19
DHS/DCS Centering Sleeve, long
338.20
DHS/DCS Coupling Screw, short
338.21
DHS/DCS Guide Shaft
338.22
DHS/DCS Coupling Screw, long
338.28
DHS/DCS Impactor
338.44
DHS Reaming Head, short
900.723 2.5 mm Threaded Guide Wire, 230 mm, 10 ea.
900.723LBL
Graphic Case Labels, for 900.723
Implants in set 105.37
214.028 4.5 mm Cortex Screws
214.054
3 ea.: 28, 30, 48, 50, 52 and 54 mm
6 ea.: 44 and 46 mm
8 ea.: 32, 34, 36, 38 and 42 mm
10 ea.: 40 mm
Also available: DHS Basic Set with self-tapping screws (105.837J) and DHS Basic Set (105.37J)
With standard drill bits 310.20, 310.32 and 310.45 to fit Jacobs chuck.
DHS/DCS Basic Screw Rack, with self-tapping screws (105.812)
Variable Angle Guide for DHS (338.047)
5/11
1-157
305.360
280.000
280.950
280.990
281.140
281.160
281.240
281.260
281.340
281.360
281.440
281.460
281.540
281.840
Plates
and Screws
Also available: DHS Universal Implant Set, sterile (105.35S),without graphic case
DHS Basic Set (105.37)
DHS Basic Set, with self-tapping screws (105.837)
DHS/DCS Basic Sets (105.31) and (105.831)
5/11
1-158
Plates
and Screws
690.371
690.371LBL
281.010
281.021
281.031
281.081
Implants
130 DHS Plates, standard barrel
10 holes, 174 mm
2 holes, 46 mm
3 holes, 62 mm
8 holes, 142 mm
281.308
281.310
281.320
281.330
281.100
281.102
281.110
281.130
281.131
281.180
281.400
281.402
281.430
281.450
281.460
281.480
281.200
281.220
281.230
281.280
281.504
281.640
281.740
281.840
5/11
1-159
304.270
304.295
280.501
280.750
280.990
281.900
281.980
95 DCS Plates
1 ea.: 12, 14 and 16 holes
2 ea.: 6, 8 and 10 holes
280.251
280.275
280.990
281.900
281.980
95 DCS Plates
1 ea.: 12, 14 and 16 holes
2 ea.: 6, 8 and 10 holes
Plates
and Screws
5/11
1-160
Plates
and Screws
690.381
242.102
242.104
242.106
242.108
242.110
242.112
242.114
242.116
Implants
4.5 mm LCP Proximal Femur Plates, left
2 holes, 139 mm
4 holes, 175 mm
6 holes, 211 mm
8 holes, 247 mm
10 holes, 283 mm
12 holes, 319 mm
14 holes, 355 mm
16 holes, 391 mm
242.802
242.804
242.806
242.808
242.810
242.812
242.814
242.816
Also available: Large Fragment LCP Instrument and Implant Set (115.400)
Periarticular LCP Plating System Instrument and Screw Set (105.210)
Periarticular LCP Plating System with 5.0 mm Locking Screws (01.240.201) or 4.0 mm Locking Screws (01.240.209)
5/11
1-161
690.481
332.21
Instruments
Impactor
242.120
242.121
242.122
242.123
242.124
242.125
242.126
242.127
Implants
4.5 mm LCP Proximal Femur Hook Plates
2 holes, 133 mm
4 holes, 169 mm
6 holes, 205 mm
8 holes, 241 mm
10 holes, 277 mm
12 holes, 313 mm
14 holes, 349 mm
16 holes, 385 mm
Plates
and Screws
Also available: Periarticular LCP Plating System Instrument and Screw Set (105.210)
Large Fragment LCP Instrument and Implant Set (115.400)
Periarticular LCP Plating System with 5.0 mm Locking Screws (01.240.201) or 4.0 mm Locking Screws (01.240.209)
5/11
1-162
Plates
and Screws
690.466
324.170
324.171
222.656
222.657
222.658
222.659
222.660
222.661
222.662
222.663
222.664
222.665
222.666
222.667
222.668
222.669
222.656
222.657
222.658
222.659
02.001.300
02.001.302
02.001.304
02.001.306
02.001.308
02.001.320
02.001.322
02.001.324
02.001.326
02.001.328
Also available: Periarticular LCP Plating System Instrument and Implant Set (105.210)
Basic Percutaneous Instrument Set (105.072)
Longer lengths of 4.5 mm LCP Curved Condylar Plates
Periarticular LCP Plating System with 5.0 mm Locking Screws (01.240.201) or 4.0 mm Locking Screws (01.240.209)
5/11
1-163
690.322
329.917
Instruments
Bending Template, for Condylar Buttress Plates
240.92
240.94
240.93
240.95
240.70
240.73
240.71
240.74
240.72
240.75
Implants
Condylar Buttress Plates
7 holes, for left femur, 158 mm
7 holes, for right femur, 158 mm
9 holes, for left femur, 190 mm
9 holes, for right femur, 190 mm
11 holes, for left femur, 221 mm
11 holes, for right femur, 221 mm
13 holes, for left femur, 253 mm
13 holes, for right femur, 253 mm
15 holes, for left femur, 285 mm
15 holes, for right femur, 285 mm
Plates
and Screws
Also available: Titanium LC-DCP Condylar Buttress Plate Implant Set (145.262)
5/11
1-164
Plates
and Screws
690.323
329.918
Instruments
Bending Template, for LC-DCP Condylar Buttress Plates
440.547
440.549
440.551
440.553
440.555
Implants
Titanium LC-DCP Condylar Buttress Plates
For right femur
7 holes, 177 mm
9 holes, 213 mm
11 holes, 249 mm
13 holes, 285 mm
15 holes, 321 mm
440.567
440.569
440.571
440.573
440.575
Also available: Condylar Buttress Plate Implant SetDCP (105.232), with stainless steel implants
5/11
1-165
For use with Basic Instrument Set for LC-DCP and DCP (115.04) and Basic Screw Set (105.11)
305.15
310.19
312.46
322.43
332.01
332.06
332.09
332.12
332.16
332.20
332.21
333.060
333.080
333.16
333.20
Instruments
2.0 mm Drill Bit, 100 mm, quick coupling, 2 ea.
4.5 mm/3.2 mm Double Drill Sleeve
4.5 mm DCP Hip Drill Guide
Triple Drill Guide, fixed angle 130
Router, quick coupling
Chisel Guide, with adjustable angle
Seating Chisel
Inserter-Extractor
Slotted Hammer
Impactor
Triangular Positioning Plates
1 ea: 90/50/40; 80/70/30; 100/60/20
110/90/90/70 Quadrangular Positioning Plate
Condylar Plate Guide
292.20
Implants
2.0 mm Kirschner Wire, 150 mm (10/pkg.), 1 pkg.
5/11
1-166
Plates
and Screws
305.20
237.50
237.52
237.54
237.56
Implants
95 Condylar Plates, 5 holes, 92 mm shaft
50 mm blade length
60 mm
70 mm
80 mm
237.70
237.72
237.74
237.76
237.90
237.92
237.94
237.96
237.20
237.22
237.24
237.26
5/11
1-167
305.080
292.65
310.69
319.21
329.905
329.908
329.912
332.401
332.402
332.403
237.043,
237.044
237.053,
237.054
237.063,
237.064
237.083
237.086
237.103
237.106
237.123
237.126
Plates
and Screws
105.446 4.5 mm 90 Cannulated LC-Angled Blade Plate Instrument and Implant Set
145.446 4.5 mm 90 Titanium Cannulated LC-Angled Blade Plate Instrument and Implant Set
4.5 mm 90 Cannulated LC-Angled Blade Plate Instrument and Implant Set Graphic Case
(includes instrument tray)
Instruments (in both sets)
2.0 mm Threaded Guide Wire, 230 mm, 10 ea.
4.5 mm Cannulated Drill Bit, 233 mm, 2.1 mm cannulation, Jacobs chuck, 2 ea.
Cannulated Screw Measuring Device
Bending Template, 5 hole, for 4.5 mm 90 Cannulated LC-Angled Blade Plates
Bending Template, 8 hole, for 4.5 mm 90 Cannulated LC-Angled Blade Plates
Bending Template, 12 hole, for 4.5 mm 90 Cannulated LC-Angled Blade Plates
Drill Guide, for 4.5 mm 90 Cannulated LC-Angled Blade Plate
Inserter/Extractor Handle, for 4.5 mm 90 Cannulated LC-Angled Blade Plates
Small Slotted Hammer
Implants in set 105.446
4.5 mm 90 Cannulated LC-Angled Blade Plates
4 hole
1 ea.: 30 mm and 40 mm blade lengths
5 hole
1 ea.: 30 mm and 40 mm blade lengths
6 hole
1 ea.: 30 mm and 40 mm blade lengths
8 hole
1 ea.: 30 mm, 40 mm, 50 mm and 60 mm
blade lengths
10 hole
1 ea.: 30 mm, 40 mm, 50 mm and 60 mm
blade lengths
12 hole
1 ea.: 30 mm, 40 mm, 50 mm and 60 mm
blade lengths
437.043
437.044
437.053
437.054
437.063
437.064
437.083
437.086
437.103
437.106
437.123
437.126
5/11
1-168
Plates
and Screws
690.370
292.699
321.17
324.022
324.027
324.033
324.037
324.043
324.044
324.050
324.052
324.055
Instruments
2.0 mm Kirschner Wire, threaded spade point tip, 280 mm, 10 ea.
4.5 mm Pin Wrench, 120 mm
Insertion Sleeve, for 5.0 mm Titanium Locking Screws, 3 ea.
5.0 mm Trocar
Pull Reduction Instrument, for LISS, 2 ea.
2.0 mm Kirschner Wire Measuring Device, for LISS
Fixation Bolt, for LISS Insertion Guides
Stabilization Bolt, for LISS Insertion Guides, 2 ea.
3.5 mm Hexagonal Screwdriver Shaft, self-retaining
3.5 mm Torque Limiting Screwdriver, self-retaining
2.0 mm Kirschner Wire Insertion Sleeve
422.390
Implants
Titanium Screw Hole Insert, 5 mm, 5 ea.
422.391
422.397
5/11
1-169
690.368
324.011
324.012
324.019
Instruments
Distal Femur LISS Insertion Guide, left
Distal Femur LISS Insertion Guide, right
Stopper for LISS Insertion Guides, 20 ea.
422.340
422.341
422.344
422.345
422.348
422.349
Implants
Titanium Distal Femur LISS Plates
5 holes, 156 mm, right
5 holes, 156 mm, left
9 holes, 236 mm, right, 2 ea.
9 holes, 236 mm, left, 2 ea.
13 holes, 316 mm, right, 2 ea.
13 holes, 316 mm, left, 2 ea.
Plates
and Screws
145.473 Titanium Distal Femur LISS Implant and Insertion Guide Set
5/11
1-170
Plates
and Screws
60.120.335
60.120.340
222.250
222.251
222.252
222.253
222.254
222.255
222.256
222.257
222.258
222.259
422.250
422.251
422.252
422.253
422.254
422.255
422.256
422.257
422.258
422.259
5/11
1-171
690.369
324.003
324.004
324.019
Instruments
Proximal Tibia LISS Insertion Guide, left
Proximal Tibia LISS Insertion Guide, right
Stopper For LISS Insertion Guides, 20 ea.
422.300
422.301
422.304
422.305
422.308
422.309
Implants
Titanium Proximal Tibia LISS Plates
5 holes, 140 mm, right
5 holes, 140 mm, left
9 holes, 220 mm, right, 2 ea.
9 holes, 220 mm, left, 2 ea.
13 holes, 300 mm, right, 2 ea.
13 holes, 300 mm, left, 2 ea.
Plates
and Screws
145.472 Titanium Proximal Tibia LISS Implant and Insertion Guide Set
5/11
1-172
Plates
and Screws
60.120.460
60.120.465
222.220
222.221
222.222
222.223
222.224
222.225
222.226
222.227
222.228
222.229
Implants in 01.120.460
LCP Proximal Lateral Tibia Plates
5 holes, 140 mm, right
5 holes, 140 mm, left
7 holes, 180 mm, right
7 holes, 180 mm, left
9 holes, 220 mm, right
9 holes, 220 mm, left
11 holes, 260 mm, right
11 holes, 260 mm, left
13 holes, 300 mm, right
13 holes, 300 mm, left
422.220
422.221
422.222
422.223
422.224
422.225
422.226
422.227
422.228
422.229
Implants in 01.120.465
Titanium LCP Proximal Lateral Tibia Plates
5 holes, 140 mm, right
5 holes, 140 mm, left
7 holes, 180 mm, right
7 holes, 180 mm, left
9 holes, 220 mm, right
9 holes, 220 mm, left
11 holes, 260 mm, right
11 holes, 260 mm, left
13 holes, 300 mm, right
13 holes, 300 mm, left
5/11
1-173
60.120.338
690.370.40
02.221.458
02.221.460
02.221.462
222.402
222.404
213.418
213.426
213.440
213.455
213.465
213.475
213.485
422.390
422.391
422.392
422.393
422.394
422.395
422.396
422.397
422.402
422.404
Plates
and Screws
5/11
1-174
Plates
and Screws
690.445
Instruments
02.108.200 3.0 mm Drill Tip Guide Wire with Threads,
230 mm (10/pkg.), 1 ea.
310.31
3.2 mm Drill Bit, quick coupling, 145 mm, 2 ea.
310.430
4.3 mm Drill Bit, quick coupling, 221 mm, 2 ea.
311.44
T-Handle, with quick coupling
312.46
4.5 mm/3.2 mm Double Drill Sleeve
312.48
4.5 mm/3.2 mm Insert Drill Sleeve
312.932
312.933
314.152
319.10
323.042
323.500
324.052
324.168
395.000
395.001
399.097
312.924
312.926
312.930
312.931
413.309
Implants
5.0 mm Titanium Spacer, 2.0 mm, 3 ea.
413.340
413.385
413.426
414.824
414.852
440.831
440.834
440.843
440.853
440.864
440.874
Also available: TomoFix Screw Rack for Titanium Cortex and Locking Screws (690.446)
Illustrations not actual size
5/11
1-175
690.367
690.467
4.5 mm LCP Proximal Tibia Plate Set Graphic Case (for set 105.222)
4.5 mm Titanium LCP Proximal Tibia Plate Set Graphic Case (for set 01.123.604)
240.036
240.037
240.038
240.039
240.040
240.041
240.042
240.043
240.044
240.045
240.046
240.047
440.036
440.037
440.038
440.039
440.040
440.041
440.042
440.043
440.044
440.045
440.046
440.047
Plates
and Screws
Implants
4.5 mm Titanium LCP Proximal Tibia Plates
4 holes, 82 mm, right
4 holes, 82 mm, left
6 holes, 118 mm, right
6 holes, 118 mm, left
8 holes, 154 mm, right
8 holes, 154 mm, left
10 holes, 190 mm, right
10 holes, 190 mm, left
12 holes, 226 mm, right
12 holes, 226 mm, left
14 holes, 262 mm, right
14 holes, 262 mm, left
Also available: Locking Periarticular Plating System Instrument and Screw Set (105.210)
Locking Periarticular Plating System Instrument and Titanium Screw Set (01.223.604)
Basic Percutaneous Instrument Set (105.072)
5/11
1-176
Plates
and Screws
690.321
Titanium LC-DCP Lateral Tibial Head Buttress Plate Implant Set Graphic Case
329.721
Instruments
Bending Template, for LC-DCP Lateral Tibial Head Buttress Plates
440.515
440.517
440.519
440.521
440.523
Implants
Titanium LC-DCP Lateral Tibial Head Buttress Plates
For right tibia
5 holes, 130 mm
7 holes, 166 mm
9 holes, 202 mm
11 holes, 238 mm
13 holes, 274 mm
440.525
440.527
440.529
440.531
440.533
5/11
1-177
690.394
239.984
239.985
239.986
239.987
239.988
239.989
239.990
239.991
239.992
239.993
239.994
239.995
239.996
239.997
Implants in 01.120.432
4.5 mm LCP Medial Proximal Tibia Plates
4 holes, right, 106 mm
4 holes, left, 106 mm
6 holes, right, 142 mm
6 holes, left, 142 mm
8 holes, right, 178 mm
8 holes, left, 178 mm
10 holes, right, 214 mm
10 holes, left, 214 mm
12 holes, right, 250 mm
12 holes, left, 250 mm
14 holes, right, 286 mm
14 holes, left, 286 mm
16 holes, right, 322 mm
16 holes, left, 322 mm
439.984
439.985
439.986
439.987
439.988
439.989
439.990
439.991
439.992
439.993
439.994
439.995
439.996
439.997
Implants in 01.120.434
4.5 mm Titanium LCP Medial Proximal Tibia Plates
4 holes, right, 106 mm
4 holes, left, 106 mm
6 holes, right, 142 mm
6 holes, left, 142 mm
8 holes, right, 178 mm
8 holes, left, 178 mm
10 holes, right, 214 mm
10 holes, left, 214 mm
12 holes, right, 250 mm
12 holes, left, 250 mm
14 holes, right, 286 mm
14 holes, left, 286 mm
16 holes, right, 322 mm
16 holes, left, 322 mm
Plates
and Screws
5/11
1-178
Plates
and Screws
304.220
304.420
292.72
310.16
310.65
310.85
311.44
311.59
312.46
312.73
312.74
312.75
214.520
214.572
219.91
4.5 mm Cannulated Screw Instrument and Implant Set Graphic Case (for Set 105.04)
4.5 mm Titanium Cannulated Screw Instrument and Implant Set Graphic Case (for Set 145.04)
Instruments
1.6 mm Threaded Guide Wire, 150 mm,10 ea.
1.5 mm Drill Bit, quick coupling, 110 mm
3.2 mm Cannulated Drill Bit, quick coupling,
170 mm, 2 ea.
Cannulated Countersink
T-Handle with quick coupling
Cannulated Tap
4.5 mm/3.2 mm Double Drill Sleeve
Adjustable Parallel Wire Guide
1.6 mm Trocar, 59 mm length
3.2 mm/1.6 mm Drill Sleeve, 52 mm length
Implants in Set 105.04
4.5 mm Cannulated Screws,
partially threaded
3 ea.: 20, 22, 24, 26, 28, 30, 32, 34, 36,
38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 60,
64, 68 and 72 mm
Washer, 10.0 mm, 5 ea.
312.76
312.77
314.15
314.20
314.31
319.17
319.26
319.35
319.97
414.520
414.572
419.91
Also available: 4.5 mm Cannulated Screws, fully threaded (stainless steel and titanium)
4.5 mm Cannulated Drill Bit (310.66)
Illustrations not actual size
5/11
1-179
60.240.010
213.414
213.490
413.414
413.490
5/11
1-180
Plates
and Screws
60.240.010
212.251
212.267
412.251
412.267
5/11
1-181
5.0 mm Locking Screw, self-drilling, with StarDrive & Periprosthetic Screw Sets
Plates
and Screws
01.240.014 5.0 mm Locking Screw, self-drilling, with StarDrive & Periprosthetic Screw Set
01.240.015 5.0 mm Titanium Locking Screw, self-drilling, with StarDrive & Periprosthetic Screw Set
60.240.011
Screw Rack for 5.0 mm Locking Screws, self-drilling and Periprosthetic Screws
02.221.508
02.221.518
212.252
212.266
04.221.508
04.221.518
412.252
412.266
5/11
1-182
Plates
and Screws
690.379
690.380
690.375
292.68
310.495
310.63
310.78
311.689
312.01
312.02
312.05
312.07
208.401
208.425
208.431
208.452
312.08
312.09
312.692
312.694
313.93
314.04
314.05
314.11
314.23
319.24
319.46
319.70
319.97
338.49
208.460
208.482
219.99
5/11
1-183
208.830
208.950
209.845
209.950
208.401
208.425
208.431
208.452
208.830
208.950
209.620
209.730
219.99
Plates
and Screws
209.845
209.950
219.99
5/11
1-184
Plates
and Screws
690.379
690.380
690.375
292.68
310.495
310.63
310.78
311.689
312.01
312.02
312.05
312.07
408.401
408.425
408.431
408.452
312.08
312.09
312.692
312.694
guide
313.93
314.04
314.05
314.11
314.23
319.24
319.46
319.70
319.97
338.49
408.460
408.482
419.99
5/11
1-185
408.830
408.950
409.845
409.950
408.401
408.425
408.431
408.452
408.830
408.950
409.620
409.730
419.99
Plates
and Screws
409.845
409.950
419.99
Also available: 6.5 mm Partially Threaded Titanium Cannulated Screw Set (145.181)
6.5 mm Fully Threaded Titanium Cannulated Screw Set (145.182)
7.3 mm Partially Threaded Titanium Cannulated Screw Set (145.186)
7.3 mm Fully Threaded Titanium Cannulated Screw Set (145.187)
Longer length 6.5 mm and 7.3 mm Titanium Cannulated Screws,
16 mm and 32 mm thread lengths, and fully threaded
2.8 mm Guide Wires (292.81 and 900.726)
5/11
1-186
Plates
and Screws
304.230
292.65
310.19
310.69
311.69
312.46
312.71
314.11
314.19
319.21
319.27
319.30
319.31
319.32
319.33
319.34
319.36
319.97
Instruments
2.0 mm Threaded Guide Wire, 230 mm, 10 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
4.5 mm Cannulated Drill Bit, Jacobs chuck, 233 mm, 2 ea.
Cannulated Tap, 230 mm, 150 mm calibration
4.5 mm/3.2 mm Double Drill Sleeve
Parallel Wire Guide
Holding Sleeve
Cannulated Hexagonal Screwdriver
Cannulated Screw Measuring Device
2.1 mm Cleaning Brush
4.5 mm Parallel Drill Guide
2.0 mm Trocar, 118 mm, 2 ea.
4.5 mm/2.0 mm Drill Sleeve, 108 mm, 2 ea.
8.0 mm/4.5 mm Drill Sleeve, 99 mm
11.0 mm/8.0 mm Protection Sleeve, 88 mm
2.0 mm Cleaning Stylet
Screw Forceps
208.030
208.130
Implants
7.0 mm Cannulated Screws, 16 mm thread length
2 ea.: 30, 35, 40, 45, 50, 55, 60, 65, 105, 110, 115, 120, 125 and 130 mm
4 ea.: 70, 75, 80, 85, 90, 95 and 100 mm
209.045
209.130
219.99
5/11
1-187
Screws
Plates
and Screws
Buttress Pins
1.8 mm Variable Angle Locking Buttress Pins, with T8 StarDrive recess
02.210.078
02.210.080
02.210.082
02.210.084
02.210.086
02.210.088
Total Length
8 mm
10
12
14
16
18
Total Length
02.210.090
02.210.092
02.210.094
02.210.096
02.210.098
02.210.100
20
22
24
26
28
30
1.8 mm Titanium Variable Angle Locking Buttress Pins, with T8 StarDrive recess
04.210.078
04.210.080
04.210.082
04.210.084
04.210.086
04.210.088
Total Length
8 mm
10
12
14
16
18
Total Length
04.210.090
04.210.092
04.210.094
04.210.096
04.210.098
04.210.100
20
22
24
26
28
30
201.962
201.964
201.966
201.968
201.970
Total Length
12 mm
14
16
18
20
Total Length
201.972
201.974
201.976
201.978
201.980
22 mm
24
26
28
30
401.962
401.964
401.966
401.968
401.970
Total Length
12 mm
14
16
18
20
Total Length
401.972
401.974
401.976
401.978
401.980
22 mm
24
26
28
30
5/11
1-188
Plates
and Screws
Screws
Cancellous Screws
4.0 mm Cancellous Bone Screws
With small hexagonal socket (2.5 mm width across flats)
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
Dia. of shaft
Drill bit for:
Threaded hole
4.0 mm
1.75 mm
1.9 mm
6.0 mm
2.3 mm (partially threaded)
2.5 mm
Total
Length, mm
Partially
Threaded
Thread
Length, mm
Fully
Threaded
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
206.010
206.012
206.014
206.016
206.018
206.020
206.022
206.024
206.026
206.028
206.030
206.035
206.040
206.045
206.050
206.055
206.060
206.065
206.070
206.075
206.080
206.085
206.090
206.095
206.100
5
5
5
6
7
8
9
10
12
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
207.010
207.012
207.014
207.016
207.018
207.020
207.022
207.024
207.026
207.028
207.030
207.035
207.040
207.045
207.050
207.055
207.060
207.065
207.070
207.075
207.080
207.085
207.090
207.095
207.100
5/11
1-189
Screws
Plates
and Screws
4.0 mm
1.75 mm
2.0 mm
6.0 mm
2.4 mm (partially threaded)
2.5 mm
Total
Length, mm
Partially
Threaded
Thread
Length, mm
Fully
Threaded
10
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
406.010
406.012
406.014
406.016
406.018
406.020
406.022
406.024
406.026
406.028
406.030
406.035
406.040
406.045
406.050
406.055
406.060
406.065
406.070
406.075
406.080
406.085
406.090
406.095
406.100
5
5
5
6
7
8
9
10
12
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
407.010
407.012
407.014
407.016
407.018
407.020
407.022
407.024
407.026
407.028
407.030
407.035
407.040
407.045
407.050
407.055
407.060
407.065
407.070
407.075
407.080
407.085
407.090
407.095
407.100
207.916
207.918
207.920
207.922
207.924
207.926
207.928
207.930
207.932
207.934
Total
Length
16 mm
18
20
22
24
26
28
30
32
34
Thread
Length
8 mm
8
10
10
10
12
12
12
14
14
207.936
207.938
207.940
207.942
207.944
207.946
207.948
207.950
207.952
Total
Length
36 mm
38
40
42
44
46
48
50
52
Thread
Length
14 mm
14
16
16
16
18
18
20
20
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
4.0 mm
1.75 mm
2.0 mm
2.4 mm
6.0 mm
2.5 mm
5/11
1-190
Plates
and Screws
Screws
Cancellous Screws continued
6.5 mm Cancellous Bone Screws
With large hexagonal socket
(3.5 mm width across flats)
Profile:
Dia. of thread
Dia. of core
Dia. of shaft*
Dia. of head
6.5 mm
3.0 mm
4.5 mm
8.0 mm
3.2 mm
4.5 mm (in hard bone for shaft)
Total Length
mm
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
16 mm Thread
Length
216.030
216.035
216.040
216.045
216.050
216.055
216.060
216.065
216.070
216.075
216.080
216.085
216.090
216.095
216.100
216.105
216.110
216.115
216.120
216.125
216.130
216.135
216.140
216.145
216.150
24 mm Thread
Length
216.240
216.245
216.250
216.255
216.260
216.265
216.270
216.275
216.280
216.285
216.290
216.295
216.300
216.305
216.310
216.315
216.320
216.325
216.330
216.335
216.340
216.345
216.350
32 mm Thread
Length
217.045
217.050
217.055
217.060
217.065
217.070
217.075
217.080
217.085
217.090
217.095
217.100
217.105
217.110
217.115
217.120
217.125
217.130
217.135
217.140
217.145
217.150
Fully
Threaded
218.020
218.025
218.030
218.035
218.040
218.045
218.050
218.055
218.060
218.065
218.070
218.075
218.080
218.085
218.090
218.095
218.100
218.105
218.110
218.115
218.120
218.125
218.130
218.135
218.140
218.145
218.150
5/11
1-191
Screws
Plates
and Screws
6.5 mm
2.75 mm
3.2 mm
4.5 mm
8.0 mm
3.2 mm
4.5 mm (in hard bone for shaft)
16 mm Thread
Length
416.030
416.035
416.040
416.045
416.050
416.055
416.060
416.065
416.070
416.075
416.080
416.085
416.090
416.095
416.100
416.105
416.110
416.115
416.120
32 mm Thread
Length
417.045
417.050
417.055
417.060
417.065
417.070
417.075
417.080
417.085
417.090
417.095
417.100
417.105
417.110
417.115
417.120
417.125
417.130
417.135
417.140
417.145
417.150
Fully
Threaded
418.025
418.030
418.035
418.040
418.045
418.050
418.055
418.060
418.065
418.070
418.075
418.080
418.085
418.090
418.095
418.100
418.105
418.110
5/11
1-192
Plates
and Screws
Screws
Cancellous Screws continued
6.5 mm Cancellous Bone Screws, with 4.0 mm core diameter
218.009
218.010
218.011
218.012
218.013
218.014
218.015
218.016
Total Length
60 mm
65
70
75
80
85
90
95
218.017
218.018
218.019
218.215
218.220
218.225
218.230
Total Length
100 mm
105
110
115
120
125
130
Dia. of Thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
2.75 mm
4.0 mm
8.0 mm
3.2 mm
4.5 mm
418.009
418.010
418.011
418.012
418.013
418.014
418.015
418.016
Total Length
60 mm
65
70
75
80
85
90
95
418.017
418.018
418.019
418.215
418.220
418.225
418.230
Total Length
100 mm
105
110
115
120
125
130
Dia. of Thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
2.75 mm
4.0 mm
8.0 mm
3.2 mm
4.5 mm
02.240.210
02.240.212
02.240.214
02.240.216
02.240.218
02.240.220
02.240.222
02.240.224
02.240.226
02.240.228
02.240.230
02.240.232
02.240.234
02.240.236
02.240.238
02.240.240
02.240.242
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
Thread Length
6 mm
8
8
8
8
15
15
15
15
15
15
25
25
25
25
25
25
02.240.244
02.240.246
02.240.248
02.240.250
02.240.252
02.240.254
02.240.256
02.240.258
02.240.260
02.240.265
02.240.270
02.240.275
02.240.280
02.240.285
02.240.290
02.240.295
Total Length
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
Thread Length
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Illustrations not actual size
5/11
1-193
Screws
Plates
and Screws
Total Length
40 mm
45
50
55
60
65
70
75
80
85
90
95
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
5.0 mm
1.0 mm
4.4 mm
4.4 mm
4.3 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
5.0 mm
1.0 mm
4.4 mm
4.4 mm
4.3 mm
Total Length
40 mm
45
50
55
60
65
70
75
80
85
90
95
5/11
1-194
Plates
and Screws
Screws
Cannulated Conical Screws continued
7.3 mm Cannulated Conical Screws, partially threaded
With smooth conical heads and self-drilling, self-tapping tips
02.207.450
02.207.455
02.207.460
02.207.465
02.207.470
02.207.475
02.207.480
02.207.485
02.207.490
02.207.495
Total Length
50 mm
55
60
65
70
75
80
85
90
95
02.207.500
02.207.505
02.207.510
02.207.515
02.207.520
02.207.525
02.207.530
02.207.535
02.207.540
02.207.545
Total Length
100 mm
105
110
115
120
125
130
135
140
145
Profile:
Dia. of thread
Threaded pitch
Dia. of core
7.3 mm
2.0 mm
5.0 mm
5.0 mm
02.207.250
02.207.255
02.207.260
02.207.265
02.207.270
02.207.275
02.207.280
02.207.285
02.207.290
02.207.295
Total Length
50 mm
55
60
65
70
75
80
85
90
95
Profile:
Dia. of thread
Threaded pitch
Dia. of core
7.3 mm
2.0 mm
5.0 mm
5.0 mm
02.240.010
02.240.012
02.240.014
02.240.016
02.240.018
02.240.020
02.240.022
02.240.024
02.240.026
02.240.028
02.240.030
02.240.032
02.240.034
02.240.036
02.240.038
02.240.040
02.240.042
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
02.240.044
02.240.046
02.240.048
02.240.050
02.240.052
02.240.054
02.240.056
02.240.058
02.240.060
02.240.065
02.240.070
02.240.075
02.240.080
02.240.085
02.240.090
02.240.095
Total Length
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
Illustrations not actual size
5/11
1-195
Screws
Plates
and Screws
02.205.025
02.205.030
02.205.035
02.205.040
02.205.045
02.205.050
02.205.055
02.205.060
02.205.065
02.205.070
02.205.075
02.205.080
02.205.085
Total Length
25 mm
30
35
40
45
50
55
60
65
70
75
80
85
02.205.090
02.205.095
02.205.100
02.205.105
02.205.110
02.205.115
02.205.120
02.205.125
02.205.130
02.205.135
02.205.140
02.205.145
Total Length
90 mm
95
100
105
110
115
120
125
130
135
140
145
Profile:
Dia. of thread
Threaded pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
04.205.025
04.205.030
04.205.035
04.205.040
04.205.045
04.205.050
04.205.055
04.205.060
Total Length
25 mm
30
35
40
45
50
55
60
04.205.065
04.205.070
04.205.075
04.205.080
04.205.085
04.205.090
04.205.095
Total Length
65 mm
70
75
80
85
90
95
Profile:
Dia. of thread
Threaded pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
02.207.020
02.207.025
02.207.030
02.207.035
02.207.040
02.207.045
02.207.050
02.207.055
02.207.060
02.207.065
02.207.070
02.207.075
02.207.080
Total Length
20 mm
25
30
35
40
45
50
55
60
65
70
75
80
02.207.085
02.207.090
02.207.095
02.207.100
02.207.105
02.207.110
02.207.115
02.207.120
02.207.125
02.207.130
02.207.135
02.207.140
02.207.145
Total Length
85 mm
90
95
100
105
110
115
120
125
130
135
140
145
Profile:
Dia. of thread
Threaded pitch
Dia. of core
7.3 mm
2.0 mm
5.0 mm
5.0 mm
5/11
1-196
Plates
and Screws
Screws
Cannulated Screws
2.4 mm Cannulated Screws
With T8 StarDrive recess
Total Length
10 mm
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
Short Thread
211.841
211.842
211.843
211.844
211.845
211.846
211.847
211.848
211.849
Long Thread
211.810
211.811
211.812
211.813
211.814
211.815
211.816
211.817
211.818
211.819
211.820
211.822
211.824
211.826
211.828
211.830
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
1.0 mm
1.7 mm
3.5 mm
1.7 mm
202.608
202.609
202.610
202.611
202.612
202.613
202.614
202.615
202.616
202.617
202.618
202.619
202.620
202.621
Total
Length
8 mm
9
10
11
12
13
14
15
16
17
18
19
20
21
Thread
Length
4 mm
4
4
4
4
4
4
4
4
4
5
5
5
5
202.622
202.623
202.624
202.625
202.626
202.627
202.628
202.629
202.630
202.632
202.634
202.636
202.638
202.640
Total
Length
22 mm
23
24
25
26
27
28
29
30
32
34
36
38
40
Thread
Length
5 mm
5
6
6
6
6
6
6
6
6
7
7
8
8
Dia. of thread
3.0 mm
Thread pitch
1.25 mm
Dia. of core
1.9 mm
Dia. of cannulation 1.2 mm
Dia. of head
4.0 mm
Drill bit for:
Threaded hole
(optional)
2.0 mm
(310.221)
5/11
1-197
Screws
Plates
and Screws
202.714
202.715
202.716
202.717
202.718
202.719
202.720
202.721
202.722
202.723
202.724
Total
Length
14 mm
15
16
17
18
19
20
21
22
23
24
Thread
Length
6 mm
7
7
8
8
9
9
9
10
10
10
202.725
202.726
202.727
202.728
202.729
202.730
202.732
202.734
202.736
202.738
202.740
Total
Length
25 mm
26
27
28
29
30
32
34
36
38
40
Thread
Length
10 mm
12
12
12
12
14
14
16
16
18
18
Dia. of thread
3.0 mm
Thread pitch
1.25 mm
Dia. of core
1.9 mm
Dia. of cannulation 1.2 mm
Dia. of head
4.0 mm
Drill bit for:
Threaded hole
(optional)
2.0 mm
(310.221)
402.608
402.609
402.610
402.611
402.612
402.613
402.614
402.615
402.616
402.617
402.618
402.619
402.620
402.621
Total
Length
8 mm
9
10
11
12
13
14
15
16
17
18
19
20
21
Thread
Length
4 mm
4
4
4
4
4
4
4
4
4
5
5
5
5
402.622
402.623
402.624
402.625
402.626
402.627
402.628
402.629
402.630
402.632
402.634
402.636
402.638
402.640
Total
Length
22 mm
23
24
25
26
27
28
29
30
32
34
36
38
40
Thread
Length
5 mm
5
6
6
6
6
6
6
6
6
7
7
8
8
Dia. of thread
3.0 mm
Thread pitch
1.25 mm
Dia. of core
1.9 mm
Dia. of cannulation 1.2 mm
Dia. of head
4.0 mm
Drill bit for:
Threaded hole
(optional)
2.0 mm
(310.221)
5/11
1-198
Plates
and Screws
Screws
Cannulated Screws continued
3.0 mm Titanium Cannulated Screws, long thread
With cruciform recess
Self-drilling, self-tapping
402.714
402.715
402.716
402.717
402.718
402.719
402.720
402.721
402.722
402.723
402.724
Total
Length
14 mm
15
16
17
18
19
20
21
22
23
24
Thread
Length
6 mm
7
7
8
8
9
9
9
10
10
10
402.725
402.726
402.727
402.728
402.729
402.730
402.732
402.734
402.736
402.738
402.740
Total
Length
25 mm
26
27
28
29
30
32
34
36
38
40
Thread
Length
10 mm
12
12
12
12
14
14
16
16
18
18
Dia. of thread
3.0 mm
Thread pitch
1.25 mm
Dia. of core
1.9 mm
Dia. of cannulation 1.2 mm
Dia. of head
4.0 mm
Drill bit for:
Threaded hole
(optional)
2.0 mm
(310.221)
5/11
1-199
Screws
Plates
and Screws
Total
Length, mm
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
2.7 mm (310.67)
Partially
Threaded
205.010
205.012
205.014
205.016
205.018
205.020
205.022
205.024
205.026
205.028
205.030
205.032
205.034
205.036
205.038
205.040
205.042
205.044
205.046
205.048
205.050
Thread
Length, mm
5
5
5
6
6
7
7
8
8
9
10
11
11
12
12
13
14
14
15
15
16
Fully
Threaded
205.210
205.212
205.214
205.216
205.218
205.220
205.222
205.224
205.226
205.228
205.230
205.232
205.234
205.236
205.238
205.240
205.242
205.244
205.246
205.248
205.250
5/11
1-200
Plates
and Screws
Screws
Cannulated Screws continued
4.0 mm Cannulated Screws
With small hexagonal socket (2.5 mm width across flats)
Self-drilling, self-tapping
Profile:
Dia. of thread
4.0 mm
Thread pitch
1.75 mm
Dia. of core
2.25 mm
Dia. of shaft
2.6 mm
Dia. of cannulation 1.35 mm
Dia. of head
5.0 mm
Drill bit for:
Threaded hole
(optional)
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
Short Thread
(Thread = 1/3
screw length)
207.610
207.612
207.614
207.616
207.618
207.620
207.622
207.624
207.626
207.628
207.630
207.632
207.634
207.636
207.638
2.7 mm (310.67)
Long Thread
(Thread = 1/2
screw length)
207.716
207.718
207.720
207.722
207.724
207.726
207.728
207.730
207.732
207.734
207.736
207.738
Total Length
40 mm
42
44
46
48
50
52
54
56
58
60
64
68
72
Short Thread
(Thread = 1/3
screw length)
207.640
207.642
207.644
207.646
207.648
207.650
207.652
207.654
207.656
207.658
207.660
207.664
207.668
207.672
Long Thread
(Thread = 1/2
screw length)
207.740
207.742
207.744
207.746
207.748
207.750
207.752
207.754
207.756
207.758
207.760
207.764
207.768
207.772
5/11
1-201
Screws
Plates
and Screws
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
Short Thread
(Thread = 1/3
screw length)
407.610
407.612
407.614
407.616
407.618
407.620
407.622
407.624
407.626
407.628
407.630
407.632
407.634
407.636
407.638
2.7 mm (310.67)
Long Thread
(Thread = 1/2
screw length)
407.716
407.718
407.720
407.722
407.724
407.726
407.728
407.730
407.732
407.734
407.736
407.738
Total Length
40 mm
42
44
46
48
50
52
54
56
58
60
64
68
72
Short Thread
(Thread = 1/3
screw length)
407.640
407.642
407.644
407.646
407.648
407.650
407.652
407.654
407.656
407.658
407.660
407.664
407.668
407.672
Long Thread
(Thread = 1/2
screw length)
407.740
407.742
407.744
407.746
407.748
407.750
407.752
407.754
407.756
407.758
407.760
407.764
407.768
407.772
5/11
1-202
Plates
and Screws
Screws
Cannulated Screws continued
4.5 mm Cannulated Screws
With large hexagonal socket (3.5 mm width across flats)
Self-drilling, self-tapping
Profile:
Dia. of thread
4.5 mm
Thread pitch
1.75 mm
Dia. of core
2.7 mm
Dia. of shaft
3.1 mm
Dia. of cannulation 1.75 mm
Dia. of head
6.5 mm
Drill bit for:
Threaded hole
(optional)
Gliding hole
(optional)
Total Length
20 mm
22
24
26
28
30
32
34
36
38
40
42
44
3.2 mm (310.65)
4.5 mm (310.66)
Partially Threaded
(Thread = 1/3
screw length)
214.520
214.522
214.524
214.526
214.528
214.530
214.532
214.534
214.536
214.538
214.540
214.542
214.544
Fully Threaded
214.720
214.722
214.724
214.726
214.728
214.730
214.732
214.734
214.736
214.738
214.740
214.742
214.744
Total Length
46 mm
48
50
52
54
56
60
64
68
72
76
80
Partially Threaded
(Thread = 1/3
screw length)
214.546
214.548
214.550
214.552
214.554
214.556
214.560
214.564
214.568
214.572
214.576
214.580
Fully Threaded
214.746
214.748
214.750
214.752
214.754
214.756
214.760
214.764
214.768
214.772
214.776
214.777
5/11
1-203
Screws
Plates
and Screws
Total Length
20 mm
22
24
26
28
30
32
34
36
38
40
42
44
3.2 mm (310.65)
4.5 mm (310.66)
Partially Threaded
(Thread = 1/3
screw length)
414.520
414.522
414.524
414.526
414.528
414.530
414.532
414.534
414.536
414.538
414.540
414.542
414.544
Fully Threaded
414.720
414.722
414.724
414.726
414.728
414.730
414.732
414.734
414.736
414.738
414.740
414.742
414.744
Total Length
46 mm
48
50
52
54
56
60
64
68
72
76
80
Partially Threaded
(Thread = 1/3
screw length)
414.546
414.548
414.550
414.552
414.554
414.556
414.560
414.564
414.568
414.572
414.576
414.580
Fully Threaded
414.746
414.748
414.750
414.752
414.754
414.756
414.760
414.764
414.768
414.772
414.776
414.777
5/11
1-204
Plates
and Screws
Screws
Cannulated Screws continued
6.5 mm Cannulated Screws
With 4.0 mm hexagonal socket
Profile:
Dia. of thread
6.5 mm
Thread pitch
2.75 mm
Dia. of core
4.5 mm
Dia. of shaft
4.8 mm
Dia. of cannulation 2.9 mm
Dia. of head
7.9 mm
Drill bit for:
Threaded hole
(optional)
Gliding hole
(optional)
Total Length
20 mm
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
160
170
180
5.0 mm (310.63)
7.3 mm (310.495)
16 mm Thread
Length
208.401
208.402
208.403
208.404
208.405
208.406
208.407
208.408
208.409
208.410
208.411
208.412
208.413
208.414
208.415
208.416
208.417
208.418
208.419
208.420
208.421
208.422
208.423
208.424
208.425
208.426
208.427
208.428
32 mm Thread
Length
208.431
208.432
208.433
208.434
208.435
208.436
208.437
208.438
208.439
208.440
208.441
208.442
208.443
208.444
208.445
208.446
208.447
208.448
208.449
208.450
208.451
208.452
208.453
208.454
208.455
Fully
Threaded
208.460
208.461
208.462
208.463
208.464
208.465
208.466
208.467
208.468
208.469
208.470
208.471
208.472
208.473
208.474
208.475
208.476
208.477
208.478
208.479
208.480
208.481
208.482
208.483
208.484
208.485
208.486
208.487
5/11
1-205
Screws
Plates
and Screws
Profile:
Dia. of thread
6.5 mm
Thread pitch
2.75 mm
Dia. of core
4.5 mm
Dia. of shaft
4.8 mm
Dia. of cannulation 2.9 mm
Dia. of head
7.9 mm
Drill bit for:
Threaded hole
(optional)
Gliding hole
(optional)
Total Length
20 mm
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
160
170
180
5.0 mm (310.63)
7.3 mm (310.495)
16 mm Thread
Length
408.401
408.402
408.403
408.404
408.405
408.406
408.407
408.408
408.409
408.410
408.411
408.412
408.413
408.414
408.415
408.416
408.417
408.418
408.419
408.420
408.421
408.422
408.423
408.424
408.425
408.426
408.427
408.428
32 mm Thread
Length
408.431
408.432
408.433
408.434
408.435
408.436
408.437
408.438
408.439
408.440
408.441
408.442
408.443
408.444
408.445
408.446
408.447
408.448
408.449
408.450
408.451
408.452
408.453
408.454
408.455
Fully
Threaded
408.460
408.461
408.462
408.463
408.464
408.465
408.466
408.467
408.468
408.469
408.470
408.471
408.472
408.473
408.474
408.475
408.476
408.477
408.478
408.479
408.480
408.481
408.482
408.483
408.484
408.485
408.486
408.487
5/11
1-206
Plates
and Screws
Screws
Cannulated Screws continued
7.0 mm Cannulated Screws
With large hexagonal socket (3.5 mm width across flats)
Profile:
Dia. of thread
7.0 mm
Thread pitch
2.75 mm
Dia. of core
4.5 mm
Dia. of shaft
4.5 mm
Dia. of cannulation 2.1 mm
Dia. of head
8.0 mm
Drill bit for:
Threaded hole
Total Length
20 mm
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
4.5 mm (310.69)
16 mm Thread
Length
208.030
208.035
208.040
208.045
208.050
208.055
208.060
208.065
208.070
208.075
208.080
208.085
208.090
208.095
208.100
208.105
208.110
208.115
208.120
208.125
208.130
208.135
208.140
208.145
208.150
32 mm Thread
Length
209.045
209.050
209.055
209.060
209.065
209.070
209.075
209.080
209.085
209.090
209.095
209.100
209.105
209.110
209.115
209.120
209.125
209.130
209.135
209.140
209.145
209.150
Fully
Threaded
209.420
209.425
209.430
209.435
209.440
209.445
209.450
209.455
209.460
209.465
209.470
209.475
209.480
209.485
209.490
209.495
209.500
209.505
209.510
209.515
209.520
209.525
209.530
5/11
1-207
Screws
Plates
and Screws
5.0 mm (310.63)
7.3 mm (310.495)
16 mm Thread
Length
208.830
208.835
208.840
208.845
208.850
208.855
208.860
208.865
208.870
208.875
208.880
208.885
208.890
208.895
208.900
208.905
208.910
208.915
208.920
208.925
208.930
208.935
208.940
208.945
208.950
208.955
208.960
208.965
208.970
208.975
208.980
32 mm Thread
Length
209.845
209.850
209.855
209.860
209.865
209.870
209.875
209.880
209.885
209.890
209.895
209.900
209.905
209.910
209.915
209.920
209.925
209.930
209.935
209.940
209.945
209.950
209.955
209.960
209.965
209.970
209.975
209.980
Fully
Threaded
209.620
209.625
209.630
209.635
209.640
209.645
209.650
209.655
209.660
209.665
209.670
209.675
209.680
209.685
209.690
209.695
209.700
209.705
209.710
209.715
209.720
209.725
209.730
209.735
209.740
209.745
209.750
209.755
209.760
209.765
209.770
209.775
209.780
5/11
1-208
Plates
and Screws
Screws
Cannulated Screws continued
7.3 mm Titanium Cannulated Screws
With large hexagonal socket (4.0 mm width across flats)
Self-drilling, self-tapping
Profile:
Dia. of thread
7.3 mm
Thread pitch
2.75 mm
Dia. of core
4.5 mm
Dia. of shaft
4.8 mm
Dia. of cannulation 2.9 mm
Dia. of head
8.2 mm
Drill bit for:
Threaded hole
(optional)
Gliding hole
(optional)
Total Length
20 mm
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
5.0 mm (310.63)
7.3 mm (310.495)
16 mm Thread
Length
408.830
408.835
408.840
408.845
408.850
408.855
408.860
408.865
408.870
408.875
408.880
408.885
408.890
408.895
408.900
408.905
408.910
408.915
408.920
408.925
408.930
408.935
408.940
408.945
408.950
32 mm Thread
Length
409.845
409.850
409.855
409.860
409.865
409.870
409.875
409.880
409.885
409.890
409.895
409.900
409.905
409.910
409.915
409.920
409.925
409.930
409.935
409.940
409.945
409.950
Fully
Threaded
409.620
409.625
409.630
409.635
409.640
409.645
409.650
409.655
409.660
409.665
409.670
409.675
409.680
409.685
409.690
409.695
409.700
409.705
409.710
409.715
409.720
409.725
409.730
5/11
1-209
Screws
Plates
and Screws
Conical Screws
3.5 mm Conical Screws, self-tapping
Profile:
Dia. of thread
Thread pitch
Dia. of core
3.5 mm
0.8 mm
2.9 mm
2.8 mm
Total Length
40 mm
45
50
55
60
65
70
75
80
85
90
95
Partially
Threaded
212.417
212.419
212.421
212.423
212.424
212.425
212.426
212.427
212.428
212.429
212.430
212.431
Fully
Threaded
212.317
212.319
212.321
212.323
212.324
212.325
212.326
212.327
212.328
212.329
212.330
212.331
3.5 mm
0.8 mm
2.9 mm
2.8 mm
Total Length
40 mm
45
50
55
60
65
70
75
80
85
90
95
Partially
Threaded
412.417
412.419
412.421
412.423
412.424
412.425
412.426
412.427
412.428
412.429
412.430
412.431
Fully
Threaded
412.317
412.319
412.321
412.323
412.324
412.325
412.326
412.327
412.328
412.329
412.330
412.331
5/11
1-210
Plates
and Screws
Screws
Cortex Screws
1.0 mm Cortex Screws, self-tapping
With cruciform recess
200.526
200.527
200.528
200.529
200.530
Total Length
6 mm
7
8
9
10
200.531
200.532
200.533
200.534
Total Length
11 mm
12
13
14
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.0 mm
0.25 mm
0.7 mm
1.6 mm
0.76 mm
1.0 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.0 mm
0.25 mm
0.7 mm
1.6 mm
0.76 mm
1.0 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.3 mm
0.5 mm
0.9 mm
2.4 mm
1.0 mm
1.3 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.3 mm
0.5 mm
0.9 mm
2.4 mm
1.0 mm
1.3 mm
400.526
400.527
400.528
400.529
400.530
Total Length
6 mm
7
8
9
10
400.531
400.532
400.533
400.534
Total Length
11 mm
12
13
14
Total Length
6 mm
7
8
9
10
11
200.692
200.693
200.694
200.696
200.698
Total Length
12 mm
13
14
16
18
Total Length
6 mm
7
8
9
10
11
400.692
400.693
400.694
400.696
400.698
Total Length
12 mm
13
14
16
18
5/11
1-211
Screws
Plates
and Screws
Length
6 mm
7
8
9
10
11
12
13
14
15
16
18
20
22
24
Length
6 mm
7
8
9
10
11
12
13
14
15
16
18
20
22
24
5/11
1-212
Plates
and Screws
Screws
Cortex Screws continued
1.5 mm Cortex Screws
With cruciform recess
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.5 mm
0.5 mm
1.1 mm
3.0 mm
1.1 mm
1.5 mm
Total Length
6 mm
7
8
9
10
11
12
Standard
200.006
200.007
200.008
200.009
200.010
200.011
200.012
Self-Tapping
200.806
200.807
200.808
200.809
200.810
200.811
200.812
Total Length
13 mm
14
16
18
20
22
24
Standard
200.014
200.016
200.018
200.020
Self-Tapping
200.813
200.814
200.816
200.818
200.820
200.822
200.824
Total Length
14 mm
16
18
20
22
24
Standard
400.014
400.016
400.018
400.020
400.022
400.024
Self-Tapping
400.814
400.816
400.818
400.820
400.822
400.824
1.5 mm
0.5 mm
1.1 mm
3.0 mm
1.1 mm
1.5 mm
Total Length
6 mm
7
8
9
10
11
12
Standard
400.006
400.007
400.008
400.009
400.010
400.011
400.012
Self-Tapping
400.806
400.807
400.808
400.809
400.810
400.811
400.812
Also available: 1.5 mm Titanium Cortex Screws, self-tapping, for Modular Hand System (400.806.96400.824.96), with an
additional 13 mm size (400.813.96).
5/11
1-213
Screws
Plates
and Screws
2.0 mm
0.6 mm
1.4 mm
3.5 mm
1.5 mm
2.0 mm
Total Length
6 mm
7
8
9
10
11
12
13
14
16
18
20
22
Standard
201.006
201.008
201.010
201.012
201.014
201.016
201.018
201.020
201.022
Self-Tapping
201.806
201.807
201.808
201.809
201.810
201.811
201.812
201.813
201.814
201.816
201.818
201.820
201.822
Total Length
24 mm
26
28
30
32
34
36
38
40
42
44
46
Standard
201.024
201.026
201.028
201.030
201.032
201.034
201.036
201.038
201.040
201.042
201.044
201.046
Self-Tapping
201.824
201.826
201.828
201.830
201.832
201.834
201.836
201.838
201.840
Total Length
24 mm
26
28
30
32
34
36
38
Standard
401.024
401.026
401.028
401.030
401.032
401.034
401.036
401.038
Self-Tapping
401.824
401.826
401.828
401.830
401.832
401.834
401.836
401.838
2.0 mm
0.6 mm
1.4 mm
3.5 mm
1.5 mm
2.0 mm
Total Length
6 mm
8
10
12
14
16
18
20
22
Standard
401.006
401.008
401.010
401.012
401.014
401.016
401.018
401.020
401.022
Self-Tapping
401.806
401.808
401.810
401.812
401.814
401.816
401.818
401.820
401.822
Also available: 2.0 mm Titanium Cortex Screws, self-tapping, for Modular Hand System (401.806.96401.838.96), with the
following additional sizes: 7 mm, 9 mm, 11 mm, and 13 mm.
Illustrations not actual size
R
5/11
1-214
Plates
and Screws
Screws
Cortex Screws continued
2.0 mm Cortex Screws, self-tapping
With T6 StarDrive recess
Total Length
6 mm
7
8
9
10
11
12
13
14
16
18
201.356.97
201.357.97
201.358.97
201.359.97
201.360.97
201.361.97
201.362.97
201.363.97
201.364.97
201.366.97
201.368.97
Total Length
20 mm
22
24
26
28
30
32
34
36
38
40
201.370.97
201.372.97
201.374.97
201.375.97
201.376.97
201.377.97
201.378.97
201.379.97
201.380.97
201.381.97
201.382.97
401.356.97
401.357.97
401.358.97
401.359.97
401.360.97
401.361.97
401.362.97
401.363.97
401.364.97
401.366.97
401.368.97
Total Length
20 mm
22
24
26
28
30
32
34
36
38
40
401.370.97
401.372.97
401.374.97
401.375.97
401.376.97
401.377.97
401.378.97
401.379.97
401.380.97
401.381.97
401.382.97
5/11
1-215
Screws
Plates
and Screws
Profile:
Thread pitch
Dia. of core
Dia. of head
1.0 mm
1.7 mm
3.5 mm
1.8 mm
2.4 mm
Total Length
6 mm
7
8
9
10
11
12
13
14
15
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
3.5 mm
Head Diameter
201.676
201.677
201.678
201.679
201.680
201.681
201.612
201.683
201.614
201.685
201.616
201.618
201.620
201.622
201.624
201.626
201.628
201.630
201.686
201.687
201.688
201.689
201.690
201.691
201.692
201.693
201.694
201.695
201.696
201.697
201.698
201.699
201.700
4.5 mm
Head Diameter
201.636
201.637
201.638
201.639
201.640
201.641
201.642
201.643
201.644
201.646
201.648
201.650
201.652
201.654
201.656
201.658
201.660
201.662
201.664
201.666
201.668
201.670
5/11
1-216
Plates
and Screws
Screws
Cortex Screws continued
2.4 mm Titanium Cortex Screws, self-tapping
With cruciform recess
Profile:
Thread pitch
Dia. of core
Dia. of head
1.0 mm
1.7 mm
3.5 mm
1.8 mm
2.4 mm
Total Length
6 mm
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
38
40
3.5 mm
Head Diameter
401.612
401.614
401.616
401.618
401.620
401.622
401.624
401.626
401.628
401.630
4.5 mm
Head Diameter
401.506.96
401.507.96
401.508.96
401.509.96
401.510.96
401.511.96
401.512.96
401.513.96
401.514.96
401.516.96
401.518.96
401.520.96
401.522.96
401.524.96
401.526.96
401.528.96
401.530.96
401.532.96
401.534.96
401.536.96
401.538.96
401.540.96
5/11
1-217
Screws
Plates
and Screws
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
28
30
201.782
201.784
201.786
201.788
201.790
02.210.942
02.210.944
02.210.946
02.210.948
02.210.950
02.210.952
02.210.954
02.210.956
Total Length
32 mm
34
36
38
40
42
44
46
48
50
52
54
56
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
1.0 mm
1.7 mm
4.0 mm
1.8 mm
2.4 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
1.0 mm
1.7 mm
4.0 mm
1.8 mm
2.4 mm
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
28
30
401.782
401.784
401.786
401.788
401.790
04.210.942
04.210.944
04.210.946
04.210.948
04.210.950
04.210.952
04.210.954
04.210.956
Total Length
32 mm
34
36
38
40
42
44
46
48
50
52
54
56
5/11
1-218
Plates
and Screws
Screws
Cortex Screws continued
2.7 mm Cortex Screws
With spherical head and small hexagonal socket (2.5 mm width across flats)
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
1.0 mm
1.9 mm
5.0 mm
2.0 mm
2.7 mm
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
28
Standard
202.006
202.008
202.010
202.012
202.014
202.016
202.018
202.020
202.022
202.024
202.026
202.028
Self-Tapping
202.806
202.808
202.810
202.812
202.814
202.816
202.818
202.820
202.822
202.824
202.826
202.828
Total Length
30
32
34
36
38
40
45
46
48
50
55
Standard
202.030
202.032
202.034
202.036
202.038
202.040
202.045
202.050
202.055
Self-Tapping
202.830
202.832
202.834
202.836
202.838
202.840
202.845
202.846
202.848
202.850
202.855
5/11
1-219
Screws
Plates
and Screws
2.7 mm
1.0 mm
1.9 mm
5.0 mm
2.0 mm
2.7 mm
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
Standard
402.006
402.008
402.010
402.012
402.014
402.016
402.018
402.020
402.022
402.024
402.026
Self-Tapping
402.806
402.808
402.810
402.812
402.814
402.816
402.818
402.820
402.822
402.824
402.826
Total Length
28
30
32
34
36
38
40
45
50
55
Standard
402.028
402.030
402.032
402.034
402.036
402.038
402.040
Self-Tapping
402.828
402.830
402.832
402.834
402.836
402.838
402.840
402.845
402.850
402.855
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
202.894
202.896
202.898
202.900
202.962
202.963
202.965
202.966
202.967
202.968
202.969
Total Length
34 mm
36
38
40
42
44
46
48
50
55
60
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
1.0 mm
1.9 mm
5.0 mm
2.0 mm
2.7 mm
5/11
1-220
Plates
and Screws
Screws
Cortex Screws continued
2.7 mm Titanium Cortex Screws, self-tapping
With T8 StarDrive recess
402.870
402.872
402.874
402.876
402.878
402.880
402.882
402.884
402.886
402.888
402.890
402.892
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
402.894
402.896
402.898
402.900
402.962
402.963
402.965
402.966
402.967
402.968
402.969
Total Length
34 mm
36
38
40
42
44
46
48
50
55
60
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
1.0 mm
1.9 mm
5.0 mm
2.0 mm
2.7 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
3.5 mm
1.25 mm
2.4 mm
6.0 mm
2.5 mm
3.5 mm
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
45
46
48
02.200.050
02.200.055
02.200.060
02.200.065
02.200.070
02.200.075
02.200.080
02.200.085
02.200.090
02.200.095
02.200.100
02.200.105
02.200.110
02.200.115
02.200.120
02.200.125
02.200.130
02.200.135
02.200.140
02.200.145
02.200.150
Total Length
50 mm
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
5/11
1-221
Screws
Plates
and Screws
3.5 mm
1.25 mm
2.4 mm
6.0 mm
2.5 mm
3.5 mm
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
Standard
204.010
204.012
204.014
204.016
204.018
204.020
204.022
204.024
204.026
204.028
204.030
204.032
204.034
204.036
204.038
204.040
Self-Tapping
204.810
204.812
204.814
204.816
204.818
204.820
204.822
204.824
204.826
204.828
204.830
204.832
204.834
204.836
204.838
204.840
204.842
204.844
Total Length
45
46
48
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
Standard
204.045
204.050
204.055
204.060
204.065
204.070
204.075
204.080
204.085
204.090
204.095
204.100
204.105
204.110
204.115
204.120
Self-Tapping
204.845
204.846
204.848
204.850
204.855
204.860
204.865
204.870
204.875
204.880
204.885
204.890
204.895
204.900
204.905
204.910
5/11
1-222
Plates
and Screws
Screws
Cortex Screws continued
3.5 mm Titanium Cortex Screws, self-tapping
With small hexagonal socket (2.5 mm width across flats)
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
3.5 mm
1.25 mm
2.4 mm
6.0 mm
2.5 mm
3.5 mm
Total Length
10 mm
12
14
16
18
20
22
24
26
28
Standard
404.010
404.012
404.014
404.016
404.018
404.020
404.022
404.024
404.026
404.028
Self-Tapping
404.810
404.812
404.814
404.816
404.818
404.820
404.822
404.824
404.826
404.828
Total Length
30
32
34
36
38
40
45
50
55
60
Standard
404.030
404.032
404.034
404.036
404.038
404.040
404.045
404.050
404.055
404.060
Self-Tapping
404.830
404.832
404.834
404.836
404.838
404.840
404.845
404.850
404.855
Total Length
40 mm
45
50
55
60
65
70
75
80
85
90
95
204.700
204.705
204.710
204.715
204.720
204.725
204.730
204.735
204.740
204.745
204.750
Total Length
100 mm
105
110
115
120
125
130
135
140
145
150
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
3.5 mm
1.25 mm
2.4 mm
6.0 mm
2.5 mm
3.5 mm
5/11
1-223
Screws
Plates
and Screws
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
206.446
206.448
206.450
206.452
206.454
206.456
206.458
206.460
206.465
206.470
206.475
206.480
206.485
206.490
206.495
206.500
Total Length
46 mm
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
4.0 mm
1.25 mm
2.9 mm
6.0 mm
2.9 mm
4.0 mm
5/11
1-224
Plates
and Screws
Screws
Cortex Screws continued
4.5 mm Cortex Screws
With large hexagonal socket (3.5 mm width across flats)
Profile:
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
4.5 mm
1.75 mm
3.0 mm
8.0 mm
3.2 mm
4.5 mm
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
Standard
214.014
214.016
214.018
214.020
214.022
214.024
214.026
214.028
214.030
214.032
214.034
214.036
214.038
214.040
214.042
214.044
214.046
214.048
214.050
214.052
214.054
214.056
214.058
214.060
214.062
Self-Tapping
214.814
214.816
214.818
214.820
214.822
214.824
214.826
214.828
214.830
214.832
214.834
214.836
214.838
214.840
214.842
214.844
214.846
214.848
214.850
214.852
214.854
214.856
214.858
214.860
214.862
Total Length
64 mm
66
68
70
72
74
76
78
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
Standard
214.064
214.066
214.068
214.070
214.072
214.074
214.076
214.078
214.080
214.085
214.090
214.095
214.100
214.105
214.110
214.115
214.120
214.125
214.130
214.135
214.140
214.145
214.150
214.155
214.160
Self-Tapping
214.864
214.866
214.868
214.870
214.872
214.874
214.876
214.878
214.880
214.885
214.890
214.895
214.900
214.905
214.910
214.915
214.920
214.925
214.930
214.935
214.940
5/11
1-225
Screws
Plates
and Screws
4.5 mm
1.75 mm
3.0 mm
8.0 mm
3.2 mm
4.5 mm
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
Standard
414.014
414.016
414.018
414.020
414.022
414.024
414.026
414.028
414.030
414.032
414.034
414.036
414.038
414.040
414.042
414.044
414.046
414.048
414.050
414.052
414.054
414.056
414.058
414.060
Self-Tapping
414.814
414.816
414.818
414.820
414.822
414.824
414.826
414.828
414.830
414.832
414.834
414.836
414.838
414.840
414.842
414.844
414.846
414.848
414.850
414.852
414.854
414.856
414.858
414.860
Total Length
62 mm
64
66
68
70
72
74
76
78
80
85
90
95
100
105
110
115
120
125
130
135
140
145
Standard
414.062
414.064
414.066
414.068
414.070
414.072
414.074
414.076
414.078
414.080
414.085
414.090
414.095
414.100
414.105
414.110
414.115
414.120
414.125
414.130
414.135
414.140
Self-Tapping
414.862
414.864
414.866
414.868
414.870
414.872
414.874
414.876
414.878
414.880
414.885
414.890
414.895
414.900
414.905
414.910
414.915
414.920
414.925
414.930
414.935
414.940
414.945
5/11
1-226
Plates
and Screws
Screws
Headless Compression Screws
1.5 mm Headless Compression Screws
Total Length
9 mm
10
11
12
13
14
02.230.109
02.230.110
02.230.111
02.230.112
02.230.113
02.230.114
Total Length
15
16
17
18
19
20
02.230.115
02.230.116
02.230.117
02.230.118
02.230.119
02.230.120
Total Length
9 mm
10
11
12
13
14
04.230.109
04.230.110
04.230.111
04.230.112
04.230.113
04.230.114
Total Length
15
16
17
18
19
20
04.230.115
04.230.116
04.230.117
04.230.118
04.230.119
04.230.120
5/11
1-227
Screws
Plates
and Screws
Total Length
9 mm
10
11
12
13
14
15
16
17
18
19
20
21
22
Short Thread
02.226.209
02.226.210
02.226.211
02.226.212
02.226.213
02.226.214
02.226.215
02.226.216
02.226.217
02.226.218
02.226.219
02.226.220
02.226.221
02.226.222
Long Thread
02.226.317
02.226.318
02.226.319
02.226.320
02.226.321
02.226.322
Total Length
23 mm
24
25
26
27
28
29
30
32
34
36
38
40
Short Thread
02.226.223
02.226.224
02.226.225
02.226.226
02.226.227
02.226.228
02.226.229
02.226.230
02.226.232
02.226.234
02.226.236
02.226.238
02.226.240
Long Thread
02.226.323
02.226.324
02.226.325
02.226.326
02.226.327
02.226.328
02.226.329
02.226.330
02.226.332
02.226.334
02.226.336
02.226.338
02.226.340
Short Thread
04.226.223
04.226.224
04.226.225
04.226.226
04.226.227
04.226.228
04.226.229
04.226.230
04.226.232
04.226.234
04.226.236
04.226.238
04.226.240
Long Thread
04.226.323
04.226.324
04.226.325
04.226.326
04.226.327
04.226.328
04.226.329
04.226.330
04.226.332
04.226.334
04.226.336
04.226.338
04.226.340
Total Length
9 mm
10
11
12
13
14
15
16
17
18
19
20
21
22
Short Thread
04.226.209
04.226.210
04.226.211
04.226.212
04.226.213
04.226.214
04.226.215
04.226.216
04.226.217
04.226.218
04.226.219
04.226.220
04.226.221
04.226.222
Long Thread
04.226.317
04.226.318
04.226.319
04.226.320
04.226.321
04.226.322
Total Length
23 mm
24
25
26
27
28
29
30
32
34
36
38
40
5/11
1-228
Plates
and Screws
Screws
Headless Compression Screws continued
3.0 mm Headless Compression Screws
With T8 StarDrive recess
Profile:
Dia. of thread
3.0 mm
Thread pitch
1.25 mm
Dia. of core
2.0 mm
Dia. of cannulation 1.1 mm
Drill bit for:
Threaded hole
Total Length
10 mm
11
12
13
14
15
16
17
18
19
20
21
22
2.0 mm
Short Thread
02.226.010
02.226.011
02.226.012
02.226.013
02.226.014
02.226.015
02.226.016
02.226.017
02.226.018
02.226.019
02.226.020
02.226.021
02.226.022
Long Thread
02.226.116
02.226.117
02.226.118
02.226.119
02.226.120
02.226.121
02.226.122
Total Length
23 mm
24
25
26
27
28
29
30
32
34
36
38
40
Short Thread
02.226.023
02.226.024
02.226.025
02.226.026
02.226.027
02.226.028
02.226.029
02.226.030
02.226.032
02.226.034
02.226.036
02.226.038
02.226.040
Long Thread
02.226.123
02.226.124
02.226.125
02.226.126
02.226.127
02.226.128
02.226.129
02.226.130
02.226.132
02.226.134
02.226.136
02.226.138
02.226.140
Total Length
23 mm
24
25
26
27
28
29
30
32
34
36
38
40
Short Thread
04.226.023
04.226.024
04.226.025
04.226.026
04.226.027
04.226.028
04.226.029
04.226.030
04.226.032
04.226.034
04.226.036
04.226.038
04.226.040
Long Thread
04.226.123
04.226.124
04.226.125
04.226.126
04.226.127
04.226.128
04.226.129
04.226.130
04.226.132
04.226.134
04.226.136
04.226.138
04.226.140
Short Thread
04.226.010
04.226.011
04.226.012
04.226.013
04.226.014
04.226.015
04.226.016
04.226.017
04.226.018
04.226.019
04.226.020
04.226.021
04.226.022
Long Thread
04.226.116
04.226.117
04.226.118
04.226.119
04.226.120
04.226.121
04.226.122
5/11
1-229
Screws
Plates
and Screws
Short Thread
02.226.620
02.226.622
02.226.624
02.226.626
02.226.628
02.226.630
02.226.632
02.226.634
02.226.636
02.226.638
02.226.640
02.226.642
02.226.644
02.226.646
02.226.648
02.226.650
Long Thread
02.226.730
02.226.732
02.226.734
02.226.736
02.226.738
02.226.740
02.226.742
02.226.744
02.226.746
02.226.748
02.226.750
Total Length
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
Short Thread
02.226.652
02.226.654
02.226.656
02.226.658
02.226.660
02.226.665
02.226.670
02.226.675
02.226.680
02.226.685
02.226.690
02.226.695
02.226.700
02.226.705S*
02.226.710S*
Long Thread
02.226.752
02.226.754
02.226.756
02.226.758
02.226.760
02.226.765
02.226.770
02.226.775
02.226.780
02.226.785
02.226.790
02.226.795
02.226.800
02.226.805S*
02.226.810S*
Short Thread
04.226.652
04.226.654
04.226.656
04.226.658
04.226.660
04.226.665
04.226.670
04.226.675
04.226.680
04.226.685
04.226.690
04.226.695
04.226.700
04.226.705S*
04.226.710S*
Long Thread
04.226.752
04.226.754
04.226.756
04.226.758
04.226.760
04.226.765
04.226.770
04.226.775
04.226.780
04.226.785
04.226.790
04.226.795
04.226.800
04.226.805S*
04.226.810S*
Short Thread
04.226.620
04.226.622
04.226.624
04.226.626
04.226.628
04.226.630
04.226.632
04.226.634
04.226.636
04.226.638
04.226.640
04.226.642
04.226.644
04.226.646
04.226.648
04.226.650
Long Thread
04.226.730
04.226.732
04.226.734
04.226.736
04.226.738
04.226.740
04.226.742
04.226.744
04.226.746
04.226.748
04.226.750
Total Length
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
Available
5/11
1-230
Plates
and Screws
Screws
Headless Compression Screws continued
6.5 mm Headless Compression Screws
Total Length
30
35
40
45
50
55
60
65
70
75
80
85
90
16 mm Thread
02.227.030
02.227.035
02.227.040
02.227.045
02.227.050
02.227.055
02.227.060
02.227.065
02.227.070
02.227.075
02.227.080
02.227.085
02.227.090
32 mm Thread
02.227.245
02.227.250
02.227.255
02.227.260
02.227.265
02.227.270
02.227.275
02.227.280
02.227.285
02.227.290
Total Length
95
100
105
110
115
120
125
130
135
140
145
150
16 mm Thread
02.227.095
02.227.100
02.227.105
02.227.110
02.227.115
02.227.120
02.227.125
02.227.130
02.227.135
02.227.140
02.227.145
02.227.150
32 mm Thread
02.227.295
02.227.300
02.227.305
02.227.310
02.227.315
02.227.320
02.227.325
02.227.330
02.227.335
02.227.340
02.227.345
02.227.350
Total Length
95
100
105
110
115
120
125
130
135
140
145
150
16 mm Thread
04.227.095
04.227.100
04.227.105
04.227.110
04.227.115
04.227.120
04.227.125
04.227.130
04.227.135
04.227.140
04.227.145
04.227.150
32 mm Thread
04.227.295
04.227.300
04.227.305
04.227.310
04.227.315
04.227.320
04.227.325
04.227.330
04.227.335
04.227.340
04.227.345
04.227.350
Total Length
30
35
40
45
50
55
60
65
70
75
80
85
90
Available
16 mm Thread
04.227.030
04.227.035
04.227.040
04.227.045
04.227.050
04.227.055
04.227.060
04.227.065
04.227.070
04.227.075
04.227.080
04.227.085
04.227.090
32 mm Thread
04.227.245
04.227.250
04.227.255
04.227.260
04.227.265
04.227.270
04.227.275
04.227.280
04.227.285
04.227.290
5/11
1-231
Screws
Plates
and Screws
Helix Blades
Helix Blades for LCP DHHS
For use with LCP DHHS Plates
Length
75 mm
80
85
90
95
100
105
110
282.234
282.235
282.236
282.237
282.238
282.239
282.240
282.241
Available
282.242
282.243
282.244
282.245
282.246
282.247
282.248
282.249
Length
115
120
125
130
135
140
145
150
Lag Screws
DHS/DCS One-Step Lag Screws
For use with DHS and DCS Plates and DHS/DCS One-Step Instrumentation
Profile:
Thread length:
22.0 mm
Dia. of shaft:
8.0 mm
Dia. of core:
8.2 mm
Dia. of cannulation: 2.7 mm
Length,
mm
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
12.0 mm Thread
Diameter
280.251
280.255
280.260
280.265
280.270
280.275
280.280
280.285
280.290
280.295
280.301
280.305
280.310
280.315
280.320
280.325
280.330
280.335
280.340
280.345
14.0 mm Thread
Diameter
280.651
280.655
280.660
280.665
280.670
280.675
280.680
280.685
280.690
280.695
280.701
280.705
280.710
280.715
280.720
280.725
280.730
280.735
280.740
280.745
Note: Short DHS/DCS Lag Screws (50, 55 and 60 mm) should be used only with the short barrel DHS plates or with DCS plates;
these screws are too short for use with the standard barrel DHS plates.
Use 2.5 mm Threaded Guide Wire, 230 mm (900.723).
Illustrations not actual size
R
5/11
1-232
Plates
and Screws
Screws
Lag Screws continued
DHS/DCS Lag Screws
For use with DHS and DCS Plates
Profile:
Thread length:
22.0 mm
Dia. of shaft:
8.0 mm
Dia. of core:
8.2 mm
Dia. of cannulation: 2.7 mm
Length,
mm
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
12.7 mm Thread
Diameter
280.501
280.550
280.600
280.650
280.700
280.750
280.800
280.850
280.900
280.950
280.000
280.050
280.100
280.150
280.200
280.250
280.300
280.350
280.400
280.451
14.0 mm Thread
Diameter
280.454
280.455
280.460
280.465
280.470
280.475
280.480
280.485
280.490
280.495
280.500
280.505
280.510
280.515
280.520
280.525
280.530
280.535
280.540
280.545
Note: Short DHS/DCS Lag Screws (50, 55 and 60 mm) should be used only with the short barrel DHS plates or with DCS plates;
these screws are too short for use with the standard barrel DHS plates.
Use 2.5 mm Threaded Guide Wire, 230 mm (900.723).
Total Length
24 mm
26
28
30
32
34
36
38
40
42
44
413.346
413.348
413.350
413.355
413.360
413.365
413.370
413.375
413.380
413.385
413.390
Total Length
46 mm
48
50
55
60
65
70
75
80
85
90
Illustrations not actual size
5/11
1-233
Screws
497.78
Plates
and Screws
Locking Screws
1.8 mm Titanium Locking Screw, 5 mm
02.214.006
02.214.007
02.214.008
02.214.009
02.214.010
02.214.011
02.214.012
02.214.013
Total Length
6 mm
7
8
9
10
11
12
13
02.214.014
02.214.015
02.214.016
02.214.018
02.214.020
02.214.022
02.214.024
Total Length
14 mm
15
16
18
20
22
24
04.214.006
04.214.007
04.214.008
04.214.009
04.214.010
04.214.011
04.214.012
04.214.013
Total Length
6 mm
7
8
9
10
11
12
13
04.214.014
04.214.015
04.214.016
04.214.018
04.214.020
04.214.022
04.214.024
Total Length
14 mm
15
16
18
20
22
24
5/11
1-234
Plates
and Screws
Screws
Locking Screws continued
2.0 mm Locking Screws, self-tapping, with StarDrive recess
201.876
201.877
201.878
201.879
201.880
201.881
201.882
201.883
201.884
Total Length
6 mm
7
8
9
10
11
12
13
14
201.886
201.888
201.890
201.892
201.894
201.896
201.898
201.900
Total Length
16 mm
18
20
22
24
26
28
30
401.876
401.877
401.878
401.879
401.880
401.881
401.882
401.883
401.884
Total Length
6 mm
7
8
9
10
11
12
13
14
401.886
401.888
401.890
401.892
401.894
401.896
401.898
401.900
Total Length
16 mm
18
20
22
24
26
28
30
212.806
212.808
212.810
212.812
212.814
212.816
212.818
Total Length
6 mm
8
10
12
14
16
18
212.820
212.822
212.824
212.826
212.828
212.830
Total Length
20 mm
22
24
26
28
30
Dia. of thread
Thread pitch
Dia. of core
2.4 mm
0.6 mm
1.9 mm
1.8 mm
5/11
1-235
Screws
Plates
and Screws
412.806
412.808
412.810
412.812
412.814
412.816
412.818
Total Length
6 mm
8
10
12
14
16
18
412.820
412.822
412.824
412.826
412.828
412.830
Total Length
20 mm
22
24
26
28
30
Dia. of thread
Thread pitch
Dia. of core
2.4 mm
0.6 mm
1.9 mm
1.8 mm
Dia. of thread
Thread pitch
Dia. of core
2.7 mm
0.6 mm
2.1 mm
2.0 mm
Dia. of thread
Thread pitch
Dia. of core
2.7 mm
0.6 mm
2.1 mm
2.0 mm
202.210
202.212
202.214
202.216
202.218
202.220
202.222
202.224
202.226
202.228
202.230
202.232
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
202.234
202.236
202.238
202.240
202.242
202.244
202.246
202.248
202.250
202.255
202.260
Total Length
34 mm
36
38
40
42
44
46
48
50
50
60
402.206
402.207
402.208
402.209
402.210
402.212
402.214
402.216
402.218
402.220
402.222
402.224
402.226
402.228
Total Length
6 mm
7
8
9
10
12
14
16
18
20
22
24
26
28
402.230
402.232
402.234
402.236
402.238
402.240
402.242
402.244
402.246
402.248
402.250
402.255
402.260
Total Length
30 mm
32
34
36
38
40
42
44
46
48
50
55
60
5/11
1-236
Plates
and Screws
Screws
Locking Screws continued
3.5 mm Locking Screws, self-tapping
For use with small fragment Locking Compression Plates
With T15 StarDrive recess
212.101
212.102
212.103
212.104
212.105
212.106
212.107
212.108
212.109
212.110
212.111
212.112
212.113
212.115
212.116
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
38
212.117
212.118
212.119
212.120
212.121
212.123
212.124
212.125
212.126
212.127
212.128
212.129
212.130
212.131
Total Length
40 mm
42
45
48
50
55
60
65
70
75
80
85
90
95
Dia. of thread
Thread pitch
Dia. of core
3.5 mm
0.8 mm
2.9 mm
2.8 mm
Dia. of thread
Thread pitch
Dia. of core
3.5 mm
0.8 mm
2.9 mm
2.8 mm
412.101
412.102
412.103
412.104
412.105
412.106
412.107
412.108
412.109
412.110
412.111
412.112
412.113
412.115
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
36
412.116
412.117
412.119
412.121
412.123
412.124
412.125
412.126
412.127
412.128
412.129
412.130
412.131
Total Length
38 mm
40
45
50
55
60
65
70
75
80
85
90
95
5/11
1-237
Screws
Plates
and Screws
213.018
213.020
213.022
213.024
213.026
213.028
213.030
Total Length
18 mm
20
22
24
26
28
30
213.032
213.034
213.036
213.038
213.040
213.045
213.050
Total Length
32 mm
34
36
38
40
45
50
Dia. of thread
Thread pitch
Dia. of core
3.5 mm
0.8 mm
2.9 mm
2.8 mm (310.28)
Dia. of thread
Thread pitch
Dia. of core
4.0 mm
1.0 mm
3.4 mm
3.2 mm
Dia. of thread
Thread pitch
Dia. of core
4.0 mm
1.0 mm
3.4 mm
3.2 mm
02.204.014
02.204.016
02.204.018
02.204.020
02.204.022
02.204.024
02.204.026
02.204.028
02.204.030
02.204.032
02.204.034
02.204.036
02.204.038
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
02.204.040
02.204.042
02.204.044
02.204.046
02.204.048
02.204.050
02.204.052
02.204.054
02.204.056
02.204.058
02.204.060
02.204.062
Total Length
40
42
44
46
48
50
52
54
56
58
60
62
04.204.014
04.204.016
04.204.018
04.204.020
04.204.022
04.204.024
04.204.026
04.204.028
04.204.030
04.204.032
04.204.034
04.204.036
04.204.038
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
04.204.040
04.204.042
04.204.044
04.204.046
04.204.048
04.204.050
04.204.052
04.204.054
04.204.056
04.204.058
04.204.060
04.204.062
Total Length
40
42
44
46
48
50
52
54
56
58
60
62
5/11
1-238
Plates
and Screws
Screws
Locking Screws continued
4.0 mm Locking Screws
With self-tapping tips
With threaded conical head and large hexagonal recess (4.0 mm across flats)
For use with the Locking Periarticular Plating System
222.580
222.581
222.582
02.204.420
222.583
02.204.424
222.584
02.204.428
222.585
02.204.432
222.586
02.204.436
222.587
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
02.204.440
222.588
02.204.444
222.589
02.204.448
222.590
02.204.452
222.591
02.204.456
222.592
02.204.460
222.593
Total Length
40 mm
42
44
46
48
50
52
54
56
58
60
62
Dia. of thread
Thread pitch
Dia. of core
4.0 mm
1.0 mm
3.4 mm
3.2 mm (310.31)
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
212.201
212.202
212.203
212.204
212.205
212.206
212.207
212.208
212.209
212.210
212.211
212.212
212.213
212.214
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
212.215
212.216
212.217
212.218
212.219
212.220
212.221
212.222
212.223
212.224
212.225
212.226
212.227
Total Length
42
44
46
48
50
55
60
65
70
75
80
85
90
5/11
1-239
Screws
Plates
and Screws
212.251
212.252
212.253
212.254
212.255
212.256
212.257
212.258
212.259
Total Length
14
18
22
26
30
35
40
45
50
212.260
212.261
212.262
212.263
212.264
212.265
212.266
212.267
Total Length
55
60
65
70
75
80
85
90
412.251
412.252
412.253
412.254
412.255
412.256
412.257
412.258
412.259
Total Length
14
18
22
26
30
35
40
45
50
412.260
412.261
412.262
412.263
412.264
412.265
412.266
412.267
Total Length
14
18
22
26
30
35
40
45
50
213.455
213.460
213.465
213.470
213.475
213.480
213.485
213.490
PHOTO
NOT AVAILABLE
Total Length
55
60
65
70
75
80
85
90
213.414
213.418
213.422
213.426
213.430
213.435
213.440
213.445
213.450
PHOTO
NOT AVAILABLE
PHOTO
NOT AVAILABLE
Total Length
55
60
65
70
75
80
85
90
5/11
1-240
Plates
and Screws
Screws
Locking Screws continued
5.0 mm Titanium Locking Screws, self-drilling
With hexagonal socket
413.414
413.418
413.422
413.426
413.430
413.435
413.440
413.445
413.450
Total Length
14
18
22
26
30
35
40
45
50
413.455
413.460
413.465
413.470
413.475
413.480
413.485
413.490
PHOTO
NOT AVAILABLE
Total Length
55
60
65
70
75
80
85
90
Total Length
18 mm
26
40
55
65
75
85
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
Total Length
14 mm
18
5/11
1-241
Screws
Plates
and Screws
Malleolar Screws
4.5 mm Malleolar Screws
With 3.5 mm hexagonal socket
Total Length
25 mm
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
215.025
215.030
215.035
215.040
215.045
215.050
215.055
215.060
215.065
215.070
215.075
215.080
215.085
215.090
215.095
215.100
215.105
215.110
215.115
215.120
Thread Length
12 mm
15
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
4.5 mm
1.75 mm
3.0 mm
3.0 mm
8.0 mm
3.2 mm
02.111.150
02.111.155
02.111.160
02.111.165
02.111.170
02.111.175
02.111.180
02.111.185
02.111.190
02.111.195
02.111.200
02.111.205
Available
Total Length
50
55
60
65
70
75
80
85
90
95
100
105
Total Length
02.111.210
02.111.215
02.111.220
02.111.225
02.111.230
02.111.235
02.111.240
02.111.245
02.111.250
02.111.255
02.111.260
110
115
120
125
130
135
140
145
150
155
160
5/11
1-242
Plates
and Screws
Screws
Midfoot Fusion Bolts continued
6.5 mm Titanium Midfoot Fusion Bolts
04.111.150
04.111.155
04.111.160
04.111.165
04.111.170
04.111.175
04.111.180
04.111.185
04.111.190
04.111.195
04.111.200
04.111.205
Total Length
50
55
60
65
70
75
80
85
90
95
100
105
Total Length
04.111.210
04.111.215
04.111.220
04.111.225
04.111.230
04.111.235
04.111.240
04.111.245
04.111.250
04.111.255
04.111.260
110
115
120
125
130
135
140
145
150
155
160
Periprosthetic Screws
5.0 mm Periprosthetic Locking Screws, self-tapping
02.221.458
02.221.460
02.221.462
222.402
222.404
Total Length
8 mm
10 mm
12 mm
14 mm
18 mm
5.0 mm Periprosthetic Locking Screws, self-tapping
For use with large fragment Locking Compression Plates
With T25 StarDrive recess
02.221.508
02.221.510
02.221.512
02.221.514
02.221.518
Total Length
8 mm
10
12
14
18
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
Available
Total Length
8 mm
10
12
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
4.3 mm
5/11
1-243
Screws
Plates
and Screws
Shaft Screws
3.5 mm Shaft Screws
With small hexagonal socket (2.5 mm width across flats)
204.216
204.218
204.220
204.222
204.224
204.226
204.228
204.230
204.232
204.234
204.236
204.238
204.240
204.245
204.250
Total Length
16 mm
18
20
22
24
26
28
30
32
34
36
38
40
45
50
Thread Length
6 mm
6
6
6
10
10
10
10
12
12
12
12
12
15
15
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
3.5 mm
1.25 mm
2.4 mm
3.5 mm
6.0 mm
2.5 mm
3.5 mm
404.216
404.218
404.220
404.222
404.224
404.226
404.228
404.230
Total
Length
16 mm
18
20
22
24
26
28
30
Thread
Length
6 mm
6
6
6
10
10
10
10
404.232
404.234
404.236
404.238
404.240
404.245
404.250
Total
Length
32 mm
34
36
38
40
45
50
Thread
Length
12 mm
12
12
12
12
15
15
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
3.5 mm
1.25 mm
2.4 mm
3.5 mm
6.0 mm
2.5 mm
3.5 mm
5/11
1-244
Plates
and Screws
Screws
Shaft Screws continued
4.5 mm Shaft Screws
With large hexagonal socket (3.5 mm width across flats)
214.222
214.224
214.226
214.228
214.230
214.232
214.234
214.236
214.238
214.240
214.242
214.244
214.246
214.248
214.250
Total
Length
22 mm
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Thread
Length
12 mm
12
12
12
12
12
12
12
12
12
12
12
12
12
12
214.252
214.254
214.256
214.258
214.260
214.264
214.268
214.272
214.276
214.280
214.285
214.290
214.295
214.300
Total
Length
52 mm
54
56
58
60
64
68
72
76
80
85
90
95
100
Thread
Length
15 mm
15
15
15
15
18
18
18
18
18
22
22
26
26
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
4.5 mm
1.75 mm
3.0 mm
4.5 mm
8.0 mm
3.2 mm
4.5 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
4.5 mm
1.75 mm
3.0 mm
4.5 mm
8.0 mm
3.2 mm
4.5 mm
414.222
414.224
414.226
414.228
414.230
414.232
414.234
414.236
414.238
414.240
414.242
414.244
414.246
414.248
414.250
414.252
Total
Length
22 mm
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
Thread
Length
12 mm
12
13
13
13
13
13
13
13
13
13
13
13
13
13
16
414.254
414.256
414.258
414.260
414.264
414.268
414.272
414.276
414.280
414.285
414.290
414.295
414.300
414.305
414.310
Total
Length
54 mm
56
58
60
64
68
72
76
80
85
90
95
100
105
110
Thread
Length
16 mm
16
16
16
20
20
20
20
20
23
23
26
26
26
26
5/11
1-245
Screws
Plates
and Screws
02.210.108
02.210.110
02.210.112
02.210.114
02.210.116
02.210.118
02.210.120
02.210.122
02.210.124
02.210.126
02.210.128
02.210.130
02.210.132
Total Length
8 mm
10
12
14
16
18
20
22
24
26
28
30
32
Total Length
02.210.134
02.210.136
02.210.138
02.210.140
02.210.142
02.210.144
02.210.146
02.210.148
02.210.150
02.210.152
02.210.154
02.210.156
34 mm
36
38
40
42
44
46
48
50
52
54
56
04.210.108
04.210.110
04.210.112
04.210.114
04.210.116
04.210.118
04.210.120
04.210.122
04.210.124
04.210.126
04.210.128
04.210.130
04.210.132
Total Length
8 mm
10
12
14
16
18
20
22
24
26
28
30
32
Total Length
04.210.134
04.210.136
04.210.138
04.210.140
04.210.142
04.210.144
04.210.146
04.210.148
04.210.150
04.210.152
04.210.154
04.210.156
34 mm
36
38
40
42
44
46
48
50
52
54
56
5/11
1-246
Plates
and Screws
Screws
Variable Angle Locking Screws continued
2.7 mm Variable Angle Locking Screws, self-tapping,
with T8 StarDrive recess
02.211.010
02.211.012
02.211.014
02.211.016
02.211.018
02.211.020
02.211.022
02.211.024
02.211.026
02.211.028
02.211.030
02.211.032
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
Total Length
02.211.034
02.211.036
02.211.038
02.211.040
02.211.042
02.211.044
02.211.046
02.211.048
02.211.050
02.211.052
02.211.054
02.211.056
34 mm
36
38
40
42
44
46
48
50
52
54
56
04.211.010
04.211.012
04.211.014
04.211.016
04.211.018
04.211.020
04.211.022
04.211.024
04.211.026
04.211.028
04.211.030
04.211.032
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
Total Length
04.211.034
04.211.036
04.211.038
04.211.040
04.211.042
04.211.044
04.211.046
04.211.048
04.211.050
04.211.052
04.211.054
04.211.056
34 mm
36
38
40
42
44
46
48
50
52
54
56
5/11
1-247
Screws
Plates
and Screws
Schuhli Assemblies
Schuhlies
For use with DCP and LC-DCP plates
Engages the screw and locks it to the plate at a 90 angle; allows the construct to act as a fixed angle device.
219.404S
For 4.5 mm Cortex Screws and 4.5 mm DCP and LC-DCP Plates
Schuhli Assembly, sterile
219.414S
For 3.5 mm Cortex Screws and 3.5 mm DCP and LC-DCP Plates
Schuhli Assembly, sterile
Titanium Schuhlies
For use with Titanium DCP and LC-DCP Plates
Engages the screw and locks it to the plate at a 90 angle;
allows the construct to act as a fixed angle device.
419.404S
419.414S
219.404S
419.404S
Washers
219.89
219.97
219.972
219.98
219.99
219.91
240.019
Washers
Threaded Washer
For 3.0 mm Cannulated Screws
5.5 mm thread diameter, 3.0 mm height, internal hexagonal drive
4.5 mm*, for mini screws
6.5 mm*, for 3.0 mm Cannulated Screws
7.0 mm*, for small screws
13.0 mm*, for large screws
10.0 mm*, for 4.5 mm Cannulated Screws
3.5 mm/4.5 mm Washer
Allows use of a 3.5 mm Cortex Screw in a 4.5 mm plate
*Outer diameter
Available
5/11
1-248
Plates
and Screws
Screws
Washers continued
Titanium Washers
419.89
Threaded Washer
For 3.0 mm Titanium Cannulated Screws
5.5 mm thread diameter, 3.0 mm height, internal hexagonal drive
419.972
419.98
419.91
419.99
*Outer diameter
219.952S
219.953S
Large (round)
16 mm
22 mm
419.952S
419.953S
Large (round)
16 mm
22 mm
Spiked Washers
For use with titanium and stainless steel screws
Made from PEEK (polyetheretherketone) + 6% BaSO4
219.931
219.941
219.951
5/11
1-249
Screws
Plates
and Screws
Wires
Precut Cerclage Wires
Without eye, soft (In packages of 10)
291.22
291.24
291.26
291.27
291.28
Diameter
0.4 mm
0.6
0.8
1.0
1.25
Length
150 mm
175
200
250
300
Note: See Metric Conversions page in front of catalog for wire gauge sizes.
292.622
292.62
292.72
292.722
292.65
Diameter
1.1 mm
1.25
1.6
1.6
2.0
Length
150 mm
150
150
150
230
Color
none
none
yellow
none
black
292.652
2.0
230
none
292.655
292.653
357.039
Diameter
1.6 mm
2.0 mm
2.8
Length
410 mm
330
350
292.621
292.721
292.651
Diameter
1.25 mm
1.6
2.0
Length
150 mm
150
230
5/11
1-250
Plates
and Screws
Screws
Wires continued
Non-Threaded Guide Wires
Spade point on one end
(292.626 sold 10/pkg.)
292.623
292.626
292.727
292.656
Diameter
1.1 mm
1.25
1.6
2.0
Length
150 mm
150
150
230
Color
none
none
yellow
blue
Calibration
150 mm
Diameter
2.8 mm
2.8 mm
Length
300 mm
450 mm
Diameter
2.8 mm
Length
300 mm
900.722
292.68
Tip
trocar point
900.726
2.8 mm
450 mm
trocar point
900.723
2.5 mm
230 mm
spade point
DHS system
310.243
2.5 mm
200 mm
drill tip
900.721
292.619
0.8 mm
100 mm
spade point
5/11
1-251
Screws
Plates
and Screws
Wires continued
Kirschner Wires, trocar point
(In packages of 10)
292.06*
292.08*
292.10
292.11
292.12
292.13
292.16
292.18
Diameter
0.6 mm
0.8
1.0
1.0
1.25
1.25
1.6
1.6
Length
70 mm
70
150
285
150
285
150
285
292.20*
292.21
292.25
292.26
292.30
292.31
Diameter
Length
2.0 mm
2.0
2.5
2.5
3.0
3.0
150 mm
285
150
285
150
285
492.08
492.10
492.12
492.16
492.18
492.20
492.21
492.25
492.26
492.30
492.31
Diameter
0.8 mm
1.0
1.25
1.6
1.6
2.0
2.0
2.5
2.5
3.0
3.0
Length
70 mm
150
150
150
285
150
285
150
285
150
285
Diameter
0.6 mm
0.8
1.0
1.25
1.6
2.0
Length
70 mm
70
150
150
150
150
5/11
1-252
Plates
and Screws
Screws
Wires continued
Kirschner Wires with Thread, trocar point
(In packages of 10)
Diameter
1.6 mm
1.6
2.5
2.5
2.0
292.71
292.73
292.75
292.76
292.79
292.699
Length
150 mm
150
150
200
150
Thread Length
5 mm
15
15
15
15
03.211.410
03.211.415
03.211.420
03.211.425
03.211.430
03.211.435
03.211.440
Thread Length
10 mm
15 mm
20 mm
25 mm
30 mm
35 mm
40 mm
02.111.500.10
02.111.501.10
02.113.001
Available
5/11
1-253
Plates
02.114.002
02.114.004
04.114.002
04.114.004
02.114.003
02.114.005
04.114.003
04.114.005
02.114.006
02.114.007
04.114.006
04.114.007
02.114.010
02.114.009
04.114.010
04.114.009
02.114.013
04.114.013
Plates
and Screws
5/11
1-254
Plates
and Screws
Plates
1.5 mm LCP Plates continued
02.114.014
04.114.014
02.114.502
02.114.504
04.114.502
04.114.504
02.114.503
02.114.505
04.114.503
04.114.505
02.114.506
02.114.507
04.114.506
04.114.507
02.114.510
02.114.509
04.114.510
04.114.509
5/11
1-255
Plates
02.114.513
04.114.513
02.114.514
04.114.514
Plates
and Screws
1.5 mm Plates
1.5 mm Straight Plates
246.031
246.191
Holes
6
12
Length
29 mm
59
246.19*
20
100
446.031
446.032
446.19*
20
100
Profile
Width: 3.8 mm
Thickness: 0.8 mm
Distance between center of holes: 5.0 mm
* These plates may be cut to desired length or shape with Plate-Cutting Pliers (391.95).
Bending Iron (329.01) or Bending Pliers (329.12) are used for contouring.
246.48
1.5 mm H-Plate
4 holes, 6 mm
446.48
Profile
Length: 9.0 mm
Width: 8.2 mm
Distance between center of holes: 5.0 mm length
4.2 mm width
5/11
1-256
Plates
and Screws
Plates
1.5 mm Plates continued
1.5 mm Extended H-Plates
8 holes, 22 mm
246.482
246.483
Right
Left
1.5 mm Titanium Extended H-Plates
8 holes, 22 mm
446.482
446.483
Right
Left
1.5 mm T-Plates
246.23*
246.24*
Holes in
Head
3
4
Holes in
Shaft
9
9
Length
50 mm
50
246.233
246.234
3
4
8
8
44
44
Profile
Width: 3.8 mm
Thickness: 0.9 mm
Distance between center of holes: 5.0 mm
Profile
Width: 4.0 mm
Thickness: 1.0 mm
Distance between center of holes: 5.0 mm
1.5 mm Titanium T-Plates
446.23*
446.24*
Holes in
Head
3
4
Holes in
Shaft
9
9
Length
50 mm
50
446.233
446.234
3
4
8
8
44
44
* These plates may be cut to desired length or shape with Plate-Cutting Pliers (391.95).
Bending Iron (329.01) or Bending Pliers (329.12) are used for contouring.
5/11
1-257
Plates
246.612
1.5 mm Y-Plate
3 holes head, 8 holes shaft, 46 mm
446.612
Plates
and Screws
246.61*
246.62*
Left
Right
446.63*
446.64*
446.63.96*
446.64.96*
Profile
Width: 3.5 mm
Thickness: 0.9 mm
Distance between center of holes: 5.0 mm
* These plates may be cut to desired length or shape with Plate-Cutting Pliers (391.95).
Bending Iron (329.01) or Bending Pliers (329.12) are used for contouring.
Head holes
4
5
Length
27 mm
32 mm
Head holes
4
5
Length
27 mm
32 mm
5/11
1-258
Plates
and Screws
Plates
1.5 mm and 2.0 mm Rotation Correction Plates continued
2.0 mm Rotation Correction Plates
2 head holes, sterile
247.354S
247.355S
Head holes
4
5
Length
34 mm
40 mm
Head holes
4
5
Length
34 mm
40 mm
2.0 mm Plates
242.531S
442.531S
247.344
247.345
247.346
247.347
247.348
247.360
447.344
447.345
447.346
447.347
447.348
447.360
5/11
1-259
Plates
Plates
and Screws
243.13
243.14
243.15
243.16
243.091
Holes
3
4
5
6
12
Length
17 mm
23
29
35
71
447.031
447.032
247.031
243.19*
443.19*
Profile
Width: 5.0 mm
Thickness: 1.0 mm
Distance between center of holes: 6.0 mm
Profile
Width: 5.0 mm
Thickness: 1.0 mm
Distance between center of holes: 5.0 mm
* These plates may be cut to desired length or shape with Plate-Cutting Pliers (391.95).
243.584
243.585
243.586
243.587
243.588
Holes
4
5
6
7
8
Length
27 mm
33
39
45
51
Profile
Thickness: 1.2 mm
449.931
449.936
449.938
Holes
4
6
8
Length
24 mm
36
48
Profile
Width: 5.5 mm
Thickness: 1.25 mm
Distance between center of holes in shaft: 6.0 mm
5/11
1-260
Plates
and Screws
Plates
2.0 mm Plates continued
2.0 mm DCP Plates
243.54
243.55
243.56
243.57
243.58
Holes
4
5
6
7
8
Length
22 mm
27
32
37
42
Thickness
1.0 mm
1.0
1.0
1.5
1.5
Profile
Width: 5.0 mm
Distance between center of holes: 5.0 mm
Distance between central holes: 7.0 mm
Holes
4
5
6
7
8
Length
22 mm
27
32
37
42
Thickness
1.0 mm
1.0
1.0
1.5
1.5
247.362
447.362
2.0 mm L-Plates
2 holes, 17 mm
243.31*
243.32*
243.33*
243.34*
Left
Right
2 holes, 19 mm
Profile
Oblique left
Oblique right
Width: 5.0 mm
Thickness: 1.0 mm
Distance between center of holes: 6.0 mm
* These plates may be contoured with Bending Iron (329.01) and Bending Pliers (329.12)
5/11
1-261
Plates
243.48
2.0 mm H-Plate
4 holes
443.48
247.351
247.615
447.351
447.615
Plates
and Screws
Profile
Length: 12.0 mm
Width: 11.0 mm
Distance between center of holes: 7.0 mm length
6.0 mm width
2.0 mm T-Plates
9 holes, 50 mm
243.23*
243.24*
Holes in
Head
3
4
2.0 mm Titanium T-Plates
9 holes, 50 mm
443.23*
443.24*
Profile
Width: 5.0 mm
Thickness: 1.0 mm, 1.2 mm (titanium)
Distance between center of holes: 5.0 mm
Holes in
Head
3
4
*These plates may be cut to desired length or shape with Plate-Cutting Pliers (391.95).
243.41
2.0 mm T-Plate
2 holes in head and shaft, 18 mm
5/11
1-262
Plates
and Screws
Plates
2.0 mm Plates continued
2.0 mm T-Plates
243.234
247.232
247.233
Holes in
Head
3
2
3
Holes in
Shaft
10
8
8
Length
65 mm
53
53
Thickness
1.2 mm
1.2 mm
1.2 mm
Length
53 mm
53
Thickness
1.2 mm
1.2 mm
447.232*
447.233*
Holes in
Head
2
3
Holes in
Shaft
8
8
247.349
447.349
243.61*
243.62*
Left
Right
2.0 mm Titanium Condylar Plates
7 holes, 39 mm
443.61*
443.62*
Left
Right
443.61.96*
443.62.96*
Profile
Width: 5.0 mm
Thickness: 1.2 mm
Distance between center of holes in shaft: 5.0 mm
* These plates may be cut to desired length with Plate-Cutting Forceps (391.95).
5/11
1-263
Plates
247.350
447.350
247.612
2.0 mm Y-Plate
3 holes head, 8 holes shaft, 55 mm
447.612
Plates
and Screws
2.4 mm Plates
249.674
247.375
249.676
247.377
249.678
247.364
449.674
447.375
449.676
447.377
449.678
447.364
Holes
6
12
Length
36 mm
72
Holes
6
12
Length
36 mm
72
5/11
1-264
Plates
and Screws
Plates
2.4 mm Plates continued
2.4 mm LC-DCP Plates
1.7 mm thick
249.924
249.926
249.928
Holes
4
6
8
Length
35 mm
51
67
Holes
4
8
Length
31 mm
48
247.366
447.366
249.670
249.615
449.670
449.615
2.4 mm T-Plates
8 holes in shaft, 54 mm
249.913
249.914
2 holes head
3 holes head
449.913
449.914
5/11
1-265
Plates
249.919
2.4 mm T-Plate
3 holes head, 10 holes shaft, 66 mm, 1.25 mm thick
249.669
449.669
249.915
2.4 mm Y-Plate
3 holes head, 8 holes shaft, 56 mm
449.915
249.679
449.679
249.916
249.917
449.916
449.917
249.921
Plates
and Screws
5/11
1-266
Plates
and Screws
Plates
2.4 mm Plates continued
241.680
241.681
241.682
241.683
241.684
241.685
441.680
441.681
441.682
441.683
441.684
441.685
241.690
241.691
241.692
441.690
441.691
441.692
02.110.205
02.110.207
Head
Holes
4
4
Shaft
Holes
3
right
3
left
02.110.206
02.110.208
4
4
5
5
right
left
02.110.201
02.110.203
5
5
3
3
right
left
02.110.202
02.110.204
5
5
5
5
right
left
04.110.205
04.110.207
2.4 mm Titanium Variable Angle LCP Volar Extra-Articular Distal Radius Plates
4
3
right
4
3
left
04.110.206
04.110.208
4
4
5
5
right
left
04.110.201
04.110.203
5
5
3
3
right
left
04.110.202
04.110.204
5
5
5
5
right
left
Illustrations not actual size
5/11
1-267
Plates
Plates
and Screws
02.111.620
02.111.621
Head
Holes
6
6
Shaft
Holes
2
2
Length
45 mm
45
right
left
02.111.630
02.111.631
6
6
3
3
54
54
right
left
02.111.640
02.111.641
6
6
4
4
66
66
right
left
02.111.650
02.111.651
6
6
5
5
75
75
right
left
02.111.720
02.111.721
7
7
2
2
47
47
right
left
02.111.730
02.111.731
7
7
3
3
55
55
right
left
02.111.740
02.111.741
7
7
4
4
68
68
right
left
02.111.750
02.111.751
7
7
5
5
77
77
right
left
2.4 mm Titanium Variable Angle LCP Two-Column Volar Distal Radius Plates
04.111.620
04.111.621
Head
Holes
6
6
Shaft
Holes
2
2
Length
45 mm
45
right
left
04.111.630
04.111.631
6
6
3
3
54
54
right
left
04.111.640
04.111.641
6
6
4
4
66
66
right
left
04.111.650
04.111.651
6
6
5
5
75
75
right
left
04.111.720
04.111.721
7
7
2
2
47
47
right
left
04.111.730
04.111.731
7
7
3
3
55
55
right
left
04.111.740
04.111.741
7
7
4
4
68
68
right
left
04.111.750
04.111.751
7
7
5
5
77
77
right
left
5/11
1-268
Plates
and Screws
Plates
2.4 mm Plates continued
2.4 mm LCP Distal Radius Plates
242.479
242.490
Straight, 5 holes, 48 mm
Straight, 6 holes, 57 mm
242.477
242.478
442.479
442.490
442.477
442.478
Profile
Width: 6.3 mm
Thickness: 1.6 mm
Head
Holes
Shaft
Holes
Length
242.500
242.501
242.502
242.503
-90
-90
+90
+90
2
2
2
2
3
4
3
4
40 mm
49
40
49
242.504
242.505
242.506
242.507
+90
+90
-90
-90
3
3
3
3
3
4
3
4
40
49
40
49
242.508
242.509
242.511
242.512
+20
+20
-20
-20
3
3
3
3
3
4
3
4
43
52
43
52
Profile
Width: 6.3 mm
Thickness: 1.6 mm
Head
Holes
Shaft
Holes
Length
442.500
442.501
442.502
442.503
-90
-90
+90
+90
2
2
2
2
3
4
3
4
40 mm
49
40
49
442.504
442.505
442.506
442.507
+90
+90
-90
-90
3
3
3
3
3
4
3
4
40
49
40
49
442.508
442.509
442.511
442.512
+20
+20
-20
-20
3
3
3
3
3
4
3
4
43
52
43
52
Illustrations not actual size
5/11
1-269
Plates
Plates
and Screws
02.110.730
02.110.731
02.110.740
02.110.741
02.110.750
02.110.751
Head
Holes
6
6
6
6
6
6
Shaft
Holes
3
3
4
4
5
5
right
left
right
left
right
left
02.110.830
02.110.831
02.110.840
02.110.841
02.110.850
02.110.851
7
7
7
7
7
7
3
3
4
4
5
5
right
left
right
left
right
left
02.110.430
02.110.431
02.110.440
02.110.441
02.110.450
02.110.451
Head
Holes
8
8
8
8
8
8
Shaft
Holes
3
3
4
4
5
5
right
left
right
left
right
left
02.110.330
02.110.331
02.110.340
02.110.341
02.110.350
02.110.351
9
9
9
9
9
9
3
3
4
4
5
5
right
left
right
left
right
left
04.110.730
04.110.731
04.110.740
04.110.741
04.110.750
04.110.751
Head
Holes
6
6
6
6
6
6
Shaft
Holes
3
3
4
4
5
5
right
left
right
left
right
left
04.110.830
04.110.831
04.110.840
04.110.841
04.110.850
04.110.851
7
7
7
7
7
7
3
3
4
4
5
5
right
left
right
left
right
left
04.110.430
04.110.431
04.110.440
04.110.441
04.110.450
04.110.451
Head
Holes
8
8
8
8
8
8
Shaft
Holes
3
3
4
4
5
5
right
left
right
left
right
left
04.110.330
04.110.331
04.110.340
04.110.341
04.110.350
04.110.351
9
9
9
9
9
9
3
3
4
4
5
5
right
left
right
left
right
left
5/11
1-270
Plates
and Screws
Plates
Distal Radius Plates
LCP Dia-Meta Volar Distal Radius Plates
02.110.005
02.110.105
02.110.007
02.110.107
02.110.009
02.110.109
02.110.011
02.110.111
02.110.013S
02.110.113S
02.110.015S
02.110.115S
Shaft
Holes
5
5
7
7
9
9
11
11
13
13
15
15
right
left
right
left
right
left
right
left
right, sterile
left, sterile
right, sterile
left, sterile
04.110.005
04.110.105
04.110.007
04.110.107
04.110.009
04.110.109
04.110.011
04.110.111
04.110.013S
04.110.113S
04.110.015S
04.110.115S
Shaft
Holes
5
5
7
7
9
9
11
11
13
13
15
15
right
left
right
left
right
left
right
left
right, sterile
left, sterile
right, sterile
left, sterile
442.491
442.493
442.492
442.494
Width: 7.5 mm
Thickness: 1.6 mm
5/11
1-271
Plates
Plates
and Screws
242.458
242.461
242.459
242.462
242.464
242.467
242.465
242.468
Head
Holes
5
5
5
5
4
4
4
4
Shaft
Holes
3
3
5
5
3
3
5
5
Length
48 mm
48
66
66
47
47
65
65
right
left
right
left
right
left
right
left
Profile
Width: 6.3 mm
Thickness: 1.6 mm
442.458TM
442.461TM
442.459TM
442.462TM
442.464TM
442.467TM
442.465TM
442.468TM
Head
Holes
5
5
5
5
4
4
4
4
Shaft
Holes
3
3
5
5
3
3
5
5
Length
48 mm
48
66
66
47
47
65
65
right
left
right
left
right
left
right
left
442.472
442.482
242.473
242.483
442.473
442.483
5/11
1-272
Plates
and Screws
Plates
2.4 mm/2.7 mm Plates
02.211.230
02.211.231
02.211.232
02.211.233
02.211.234
02.211.235
04.211.230
04.211.231
04.211.232
04.211.233
04.211.234
04.211.235
02.211.236
02.211.237
02.211.238
02.211.239
02.211.240
02.211.241
04.211.236
04.211.237
04.211.238
04.211.239
04.211.240
04.211.241
02.211.242
02.211.243
04.211.242
04.211.243
5/11
1-273
Plates
02.211.244
02.244.245
04.211.244
04.244.245
02.211.210
02.211.211
02.211.212
02.211.213
02.211.214
02.211.215
04.211.210
04.211.211
04.211.212
04.211.213
04.211.214
04.211.215
02.211.246
02.211.247
04.211.246
04.211.247
Plates
and Screws
5/11
1-274
Plates
and Screws
Plates
2.4 mm/2.7 mm Plates continued
02.211.266
04.211.266
02.211.220
04.211.220
02.211.221
02.211.222
04.211.221
04.211.222
02.211.250
02.211.251
02.211.252
04.211.250
04.211.251
04.211.252
02.211.253
02.211.254
02.211.255
02.211.265
04.211.253
04.211.254
04.211.255
04.211.265
5/11
1-275
Plates
02.211.256
02.211.257
02.211.258
02.211.259
02.211.260
02.211.261
04.211.256
04.211.257
04.211.258
04.211.259
04.211.260
04.211.261
02.211.201
02.211.202
02.211.203
02.211.204
04.211.201
04.211.202
04.211.203
04.211.204
02.211.262
02.211.263
04.211.262
04.211.263
02.211.224
04.211.224
Plates
and Screws
5/11
1-276
Plates
and Screws
Plates
2.4 mm/2.7 mm Plates continued
247.710
447.710
left
right
2.4 mm/2.7 mm Titanium Locking Cuboid Plates
Accept 2.4 mm or 2.7 mm Locking Screws
04.100.021
04.100.022
left
right
249.690
249.691
449.690
449.691
02.100.020
04.100.020
02.100.023
04.100.023
247.711
247.702
247.704
247.706
447.711
447.702
447.704
447.706
5/11
1-277
Plates
Plates
and Screws
2.7 mm Plates
2.7 mm LCP Plates
249.680
249.681
249.682
249.683
247.372
247.374
Holes
4
5
6
7
8
10
Length
40 mm
49
58
67
76
94
Holes
4
5
6
7
8
10
Length
40 mm
49
58
67
76
94
242.204
242.205
242.206
242.207
242.208
242.209
242.220
242.221
242.222
Holes
4
5
6
7
8
9
10
11
12
Length
37 mm
50
55
68
77
86
95
104
113
Profile:
Thickness: 2.6 mm
244.02
244.04
244.05
244.06
244.07
Holes
2
4
5
6
7
Length
20 mm
36
44
52
60
244.08
244.09
244.10
244.12
244.22
Holes
8
9
10
12
2
Length
68 mm
76
84
100
26
Holes
8
9
10
12
2
Length
68 mm
76
84
100
26
Profile
Width: 8.0 mm
Thickness: 2.0 mm (up to 6 holes)
2.5 mm (over 7 holes)
Distance between center of holes: 8.0 mm
Distance between central holes: 12.0 mm
Holes
2
4
5
6
7
Length
20 mm
36
44
52
60
444.008
444.009
444.010
444.012
444.022
5/11
1-278
Plates
and Screws
Plates
2.7 mm Plates continued
Quarter-Tubular Plates, with collar
242.03
242.04
242.05
242.06
242.07
242.08
Holes
3
4
5
6
7
8
Length
23 mm
31
39
47
55
63
Profile
(1/4 of a tube)
Width: 7.0 mm
Thickness: 1.0 mm
Height of collar: 0.3 mm
Distance between center of holes: 8.0 mm
Holes
3
4
5
6
7
8
Length
23 mm
31
39
47
55
63
247.370
447.370
249.689
249.688
249.702
249.701
449.689
449.688
449.702
449.701
5/11
1-279
Plates
Plates
and Screws
Left
Right
3 holes, 34 mm
242.33*
242.34*
Oblique left
Oblique right
Profile
Width: 7.0 mm
Thickness: 1.0 mm
Distance between center of holes: 8.0 mm
Oblique left
Oblique right
* These plates may be contoured with Bending Iron (329.01) and Bending Pliers (329.12).
249.687
249.686
249.699
249.698
449.687
449.686
449.699
449.698
249.685
249.697
449.685
449.697
5/11
1-280
Plates
and Screws
Plates
2.7 mm Plates continued
242.41*
442.41*
2.7 mm T-Plate
3 holes, 32 mm
2.7 mm Titanium T-Plate
3 holes, 32 mm
Profile
Width: 7.0 mm
Thickness: 1.2 mm
Distance between center of holes: 8.0 mm
* These plates may be contoured with Bending Iron (329.01) and Bending Pliers (329.12).
249.684
449.684
242.61*
242.62*
Left
Right
Profile
Width: 7.0 mm
Thickness: 1.5 mm
Distance between center of holes: 8.0 mm
Left
Right
* These plates may be contoured with Bending Iron (329.01) and Bending Pliers (329.12).
242.535
242.536
Holes
5
8
Length
31 mm
45
Profile:
Thickness: 1.2 mm
5/11
1-281
Plates
Plates
and Screws
Holes
8
9
Length
64 mm
72
Profile
Width: 8.0 mm
Thickness: 2.5 mm
Distance between center of holes: 8.0 mm
242.21
Holes
6
8
10
12
14
16
18
20
22
24
Length
48 mm
64
80
96
112
128
144
160
176
192
Profile
Width: 8.0 mm
Thickness: 3.3 mm
Distance between center of holes: 8.0 mm
Profile
Width: 13 mm
Thickness: 1.2 mm
Available
5/11
1-282
Plates
and Screws
Plates
2.7 mm/3.5 mm Plates
02.112.136
02.112.137
02.112.138
02.112.139
02.112.140
02.112.141
02.112.142
Holes
6
7
7
9
9
11
11
Length
112 mm
125
125
151
151
177
177
left
right
left
right
left
right
left
04.112.136
04.112.137
04.112.138
04.112.139
04.112.140
04.112.141
04.112.142
Length
112 mm
125
125
151
151
177
177
left
right
left
right
left
right
left
02.112.106
02.112.107
02.112.108
02.112.109
02.112.110
02.112.111
02.112.112
Length
112 mm
125
125
151
151
177
177
left
right
left
right
left
right
left
04.112.106
04.112.107
04.112.108
04.112.109
04.112.110
04.112.111
04.112.112
left
right
left
right
left
right
left
5/11
1-283
Plates
02.110.150
02.110.151
02.110.152
04.110.150
04.110.151
04.110.152
Plates
and Screws
442.51
442.52
442.53
5/11
1-284
Plates
and Screws
Plates
3.5 mm Plates
3.5 mm LCP Plates
Combi holes accept 3.5 mm locking screws, or 3.5 mm and 4.0 mm cortex and 4.0 mm cancellous bone screws.
Use the 3.5 mm Universal Drill Guide (323.36) for insertion of standard screws and threaded drill guides for
insertion of locking screws.
223.521
223.531
223.541
223.551
223.561
223.571
223.581
223.591
223.601
223.611
223.621
223.631
223.641
223.651
223.661
223.671
223.681
223.691
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
33 mm
46
59
72
85
98
111
124
137
150
163
176
189
202
215
241
267
293
Profile
Width: 11.0 mm
Thickness: 3.4 mm
Distance between center of holes: 13.0 mm
Distance between central holes: 9.4 mm
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
33 mm
46
59
72
85
98
111
124
137
150
163
176
189
202
215
241
267
293
5/11
1-285
Plates
02.161.210
02.161.212
02.161.214
02.161.216
02.161.218
02.161.220
02.161.222
02.161.270
02.161.272
02.161.274
02.161.276
02.161.278
02.161.280
02.161.282
02.161.284
02.161.286
02.161.288
02.161.290
223.406
223.407
223.408
223.409
223.410
223.411
223.412
223.414
223.416
223.418
423.406
423.407
423.408
423.409
423.410
423.411
423.412
423.414
423.416
423.418
Available
Plates
and Screws
Profile
Width: 11 mm
Thickness: 3.3 mm
Distance between holes: 13 mm
5/11
1-286
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP T-Plates
Oblique
Right
241.031
241.041
241.051
241.061
241.071
241.081
Oblique
Left
241.931
241.941
241.951
241.961
241.971
241.981
Holes
Head
3
3
3
3
3
3
Holes
Shaft
3
4
5
6
7
8
Length
52 mm
63
74
85
96
107
Holes
Shaft
3
4
5
6
7
8
Length
52 mm
63
74
85
96
107
Profile
Width: 10.0 mm
Thickness: 1.5 mm
Oblique
Left
441.931
441.941
441.951
441.961
441.971
441.981
Holes
Head
3
3
3
3
3
3
241.131
241.142
241.151
241.162
241.171
241.181
241.132
241.141
241.152
241.161
241.172
241.182
Holes
Head
3
3
3
3
3
3
4
4
4
4
4
4
Holes
Shaft
3
4
5
6
7
8
3
4
5
6
7
8
Length
50 mm
57
67
77
87
97
50
56
67
78
89
100
Width
10 mm
10
10
10
10
10
11
11
11
11
11
11
Profile
Thickness: 1.5 mm
441.131
441.142
441.151
441.162
441.171
441.181
441.132
441.141
441.152
441.161
441.172
441.182
Holes
Head
3
3
3
3
3
3
4
4
4
4
4
4
Holes
Shaft
3
4
5
6
7
8
3
4
5
6
7
8
Length
50 mm
57
67
77
87
97
50
56
67
78
89
100
Width
10 mm
10
10
10
10
10
11
11
11
11
11
11
Illustrations not actual size
5/11
1-287
Plates
Plates
and Screws
241.13
241.14
241.15
241.16
241.17
241.18
241.189
Holes
in Head
3
4
3
4
4
4
4
Holes
in Shaft
3
4
5
6
7
8
9
Length
50 mm
56
67
75
90
101
112
Profile
Width: 10.0 mm
Thickness: 1.2 mm
441.13
441.14
441.15
441.16
Holes
in Head
3
4
3
4
Holes
in Shaft
3
4
5
6
Length
50 mm
56
67
78
241.23
241.24
241.25
Holes
in Head
3
3
3
Holes
in Shaft
3
4
5
241.231
241.241
241.252
3
3
3
3
4
5
Length
53 mm
63
75
53
63
75
Profile
Width: 10.0 mm
Thickness: 1.5 mm
441.23
441.24
441.25
Holes
in Head
3
3
3
Holes
in Shaft
3
4
5
Length
53 mm
63
75
5/11
1-288
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LC-DCP Plates
223.52
223.53
223.54
223.55
223.56
223.57
223.58
223.59
223.60
223.61
223.62
223.64
223.65
223.66
223.68
223.70
Holes
2
3
4
5
6
7
8
9
10
11
12
14
15
16
18
20
Length
25 mm
38
51
64
77
90
103
116
129
142
155
181
195
208
233
259
Profile
Width: 11.0 mm
Thickness: 3.3 mm
Distance between center of holes: 13.0 mm
Holes
2
3
4
5
6
7
8
9
10
11
12
14
15
16
18
20
Length
25 mm
38
51
64
77
90
103
116
129
142
155
181
195
208
233
259
5/11
1-289
Plates
Plates
and Screws
248.02
248.03
248.04
248.05
248.06
248.07
248.08
248.09
248.10
248.12
248.14
248.16
248.18
248.20
248.22
Holes
2
3
4
5
6
7
8
9
10
12
14
16
18
20
22
Length
25 mm
37
49
61
73
85
97
109
121
145
169
194
217
242
265
Profile
Width: 10.0 mm
Thickness: 3.3 mm
Distance between center of holes: 12.0 mm
Distance between central holes: 16.0 mm
225.007
225.008
225.009
225.010
225.011
225.012
225.013
225.014
225.015
225.016
225.017
225.018
225.020
225.022
Holes
7
8
9
10
11
12
13
14
15
16
17
18
20
22
Length
90 mm
103
116
129
142
155
168
181
194
207
220
233
259
285
Profile
Width: 13.5 mm
Thickness: 4.2 mm
5/11
1-290
Plates
and Screws
Plates
3.5 mm Plates continued
One-Third Tubular LCP Plates, with collar
For use with 3.5 mm Locking Screws, 2.7 mm and 3.5 mm Cortex Screws
241.331
241.341
241.351
241.361
241.371
241.381
241.391
241.401
241.421
Holes
3
4
5
6
7
8
9
10
12
Length
33 mm
45
57
69
81
93
105
117
141
Profile
1/3 of a tube)
Diameter: 12.0 mm
Width: 9.0 mm
Thickness: 1.0 mm
Distance between center of holes: 12.0 mm
Height of collar: 0.7 mm
Holes
3
4
5
6
7
8
9
10
12
Length
33 mm
45
57
69
81
93
105
117
141
241.32
241.33
241.34
241.35
241.36
241.37
241.38
241.39
241.40
241.42
Holes
2
3
4
5
6
7
8
9
10
12
Length
25 mm
37
49
61
73
85
97
109
121
145
Profile
(1/3 of a tube)
Diameter: 12.0 mm
Width: 9.0 mm
Thickness: 1.0 mm
Distance between center of holes: 12.0 mm
Distance between central holes: 16.0 mm
Height of collar: 0.5 mm
Holes
2
3
4
5
6
7
8
9
10
12
Length
25 mm
37
49
61
73
85
97
109
121
145
Illustrations not actual size
5/11
1-291
Plates
Plates
and Screws
222.02
222.03
222.04
222.05
222.06
222.07
222.08
222.09
222.10
222.11
222.12
Holes
2
3
4
5
6
7
8
9
10
11
12
Length
39 mm
55
71
87
103
119
135
151
167
183
199
Profile
(Half of a tube)
Width: 12.0 mm
Thickness: 1.0 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 26.0 mm
Holes
2
3
4
5
6
7
8
9
10
11
12
Length
39 mm
55
71
87
103
119
135
151
167
183
199
5/11
1-292
Plates
and Screws
Plates
3.5 mm Plates continued
Cloverleaf Plates, thin blade
For use with 3.5 mm Cortex Screws, 3.5 mm Shaft Screws and 4.0 mm Cancellous Bone Screws
Shaft
3 holes
4
5
6
7
8
10
241.83
241.84
241.85
241.86
241.87
241.88
241.89
Length
88 mm
104
120
136
152
168
200
Profile
Width: 15.0 mm
Head thickness: 1.2 mm
Shaft thickness: 2.0 mm
441.83
441.84
441.85
441.86
441.87
441.88
441.89
Length
88 mm
104
120
136
152
168
200
Plate may be modified by cutting off one or more of the cloverleaf tabs.
These plates may be cut to desired length or shape with Plate-Cutting Forceps (391.95).
Holes
7
9
10
Length
77 mm
89
101
Available
Holes
7
9
10
Length
77 mm
89
101
5/11
1-293
Plates
02.112.040
02.112.041
02.112.042
04.112.040
04.112.041
04.112.042
Plates
and Screws
Holes
3
3
4
4
5
5
6
6
7
7
8
8
02.112.026
02.112.027
02.112.028
02.112.029
02.112.030
02.112.031
Available
Length
69 mm
69
81
81
94
94
108
108
123
123
135
135
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-294
Plates
and Screws
Plates
3.5 mm Plates continued
241.072S
241.073S
241.074S
241.075S
241.076S
241.077S
241.082S
241.083S
241.084S
241.085S
241.086S
241.087S
241.094S
241.095S
241.096S
241.097S
241.104S
241.105S
241.106S
241.107S
441.072S
441.073S
441.074S
441.075S
441.076S
441.077S
441.082S
441.083S
441.084S
441.085S
441.086S
441.087S
441.094S
441.095S
441.096S
441.097S
441.104S
441.105S
441.106S
441.107S
5/11
1-295
Plates
Plates
and Screws
241.062
241.063
241.064
241.065
241.066
241.067
241.068
241.069
Holes
6
6
6
6
8
8
8
8
Hook Depth
15
15
18
18
15
15
18
18
right
left
right
left
right
left
right
left
Profile
Shaft Width: 10 mm
Shaft Thickness: 3.3 mm
441.062
441.063
441.064
441.065
441.066
441.067
441.068
441.069
Holes
6
6
6
6
8
8
8
8
Hook Depth
15
15
18
18
15
15
18
18
right
left
right
left
right
left
right
left
241.901
241.903
Holes
in Shaft
3
5
241.918
241.919
241.921
241.923
241.925
5
6
8
10
12
Length
90 mm
114
142
160
196
232
268
Profile
Shaft Width: 12 mm
Shaft Thickness: 2.5 mm
Shaft Thickness: 3.7 mm (241.918.925)
5/11
1-296
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm Titanium LCP Proximal Humerus Plates
standard and long
Shaft
Holes
3
5
441.901
441.903
Length
90 mm
114
441.918
441.919
441.921
441.923
441.925
5
6
8
10
12
02.123.020
02.123.021
02.123.022
02.123.023
02.123.024
02.123.025
02.123.026
02.123.027
02.123.028
02.123.029
02.123.030
02.123.031
02.123.032S
02.123.033S
Available
142
160
196
232
268
Profile
Shaft Width: 12 mm
Shaft Thickness: 2.5 mm
Shaft Thickness: 3.7 mm (241.918.925)
5/11
1-297
Plates
Plates
and Screws
Holes
3
3
5
5
7
7
9
9
14
14
Length
58 mm
58
83
83
110
110
149
149
201
201
right
left
right
left
right
left
right
left
right
left
Profile
Width: 11 mm
Thickness: 2.5 mm
Distance between holes: 13 mm
Holes
3
3
5
5
7
7
9
9
14
14
Length
58 mm
58
83
83
110
110
149
149
201
201
right
left
right
left
right
left
right
left
right
left
Holes
3
3
5
5
7
7
9
9
14
14
Length
55 mm
55
90
90
116
116
143
143
208
208
right
left
right
left
right
left
right
left
right
left
Profile
Width: 11 mm
Thickness: 2.5 mm
Distance between holes: 13 mm
Holes
3
3
5
5
7
7
9
9
14
14
Length
55 mm
55
90
90
116
116
143
143
208
208
right
left
right
left
right
left
right
left
right
left
5/11
1-298
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP Posterolateral Distal Humerus Plates, with lateral support
241.272
241.273
241.274
241.275
241.276
241.277
241.278
241.279
241.302
241.303
Holes
3
3
5
5
7
7
9
9
14
14
Length
55 mm
55
90
90
116
116
143
143
208
208
right
left
right
left
right
left
right
left
right
left
Profile
Width: 11 mm
Thickness: 2.5 mm
Distance between holes: 13 mm
Holes
3
3
5
5
7
7
9
9
14
14
Length
55 mm
55
90
90
116
116
143
143
208
208
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
122 mm
122
158
158
194
194
230
230
266
266
302
302
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
122 mm
122
158
158
194
194
230
230
266
266
302
302
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-299
Plates
Plates
and Screws
2 holes
2 holes
4 holes
4 holes
6 holes
6 holes
8 holes
8 holes
10 holes
10 holes
12 holes
12 holes
Length
86 mm
86 mm
112 mm
112 mm
138 mm
138 mm
164 mm
164 mm
190 mm
190 mm
216 mm
216 mm
right
left
right
left
right
left
right
left
right
left
right
left
2 holes
2 holes
4 holes
4 holes
6 holes
6 holes
8 holes
8 holes
10 holes
10 holes
12 holes
12 holes
Length
86 mm
86 mm
112 mm
112 mm
138 mm
138 mm
164 mm
164 mm
190 mm
190 mm
216 mm
216 mm
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
5
6
7
8
9
10
11
Length
56 mm
70
84
98
112
126
140
154
245.121
245.131
245.141
245.161
245.181
245.201
245.221
Holes
Length
12
13
14
16
18
20
22
168 mm
182
196
224
252
280
308
Profile
Width: 10.1 mm
Thickness: 3.5 mm
Distance between center of holes: 14.0 mm
Distance between central holes: 10.0 mm
Holes
4
5
6
7
8
9
10
11
Length
56 mm
70
84
98
112
126
140
154
445.121
445.131
445.141
445.161
445.181
445.201
445.221
Holes
Length
12
13
14
16
18
20
22
168 mm
182
196
224
252
280
308
5/11
1-300
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm Locking Low Profile Reconstruction Plates
02.100.103
02.100.104
02.100.105
02.100.106
02.100.107
02.100.108
02.100.109
02.100.110
02.100.111
02.100.112
02.100.113
02.100.114
02.100.115
02.100.116
02.100.118
02.100.120
Holes
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
Length
39 mm
52
65
78
91
104
117
130
143
156
169
182
195
208
234
260
Profile
Width: 10.1 mm
Thickness: 3.7 mm
Distance between holes: 13 mm
245.023
245.024
245.025
245.026
245.027
245.028
245.029
245.030
245.031
245.032
245.033
245.034
245.035
245.036
245.038
245.039
Holes
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
Length
39 mm
52
65
78
91
104
117
130
143
156
169
182
195
208
234
260
Profile
Width: 10.2 mm
Thickness: 2.7 mm
Distance between holes: 13 mm
5/11
1-301
Plates
Plates
and Screws
02.100.203
02.100.204
02.100.205
02.100.206
02.100.207
02.100.208
02.100.209
02.100.210
02.100.211
02.100.212
02.100.213
02.100.214
02.100.215
02.100.216
02.100.218
02.100.220
Holes
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
Length
39 mm
52
65
78
91
104
117
130
143
156
169
182
195
208
234
260
Profile
Width: 10.1 mm
Thickness: 3.85 mm
Distance between holes: 13 mm
Holes
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
46 mm
58 mm
70 mm
82 mm
94 mm
106 mm
118 mm
130 mm
142 mm
154 mm
166 mm
178 mm
190 mm
214 mm
238 mm
263 mm
Holes
5
6
7
8
9
10
11
Length
58 mm
70 mm
82 mm
94 mm
106 mm
118 mm
130 mm
5/11
1-302
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP Curved Reconstruction Plates
245.341
245.361
245.381
245.401
245.421
245.441
245.461
245.481
Holes
4
6
8
10
12
14
16
18
Length
55 mm
82
106
129
149
166
180
190
Profile
Width: 10.1 mm
Thickness: 3.5 mm
Distance between center of holes: 14.0 mm
Distance between central holes: 10.0 mm
245.876
245.878
245.880
245.882
245.884
245.886
Holes
6
8
10
12
14
16
Length
78 mm
104
130
156
182
208
Profile
Width: 10.2 mm
Thickness: 2.7 mm
Distance between holes: 13 mm
Radius of curvature: 108 mm
245.906
245.908
245.910
245.912
245.914
245.916
Holes
6
8
10
12
14
16
Length
78 mm
104
130
156
182
208
Profile
Width: 10.2 mm
Thickness: 2.7 mm
Distance between holes: 13 mm
Radius of curvature: 88 mm
245.30
245.31
245.32
245.33
245.34
245.35
245.36
Holes
6
8
10
12
14
16
18
Length
70 mm
94
118
142
166
190
214
Profile
Width: 10.0 mm
Thickness: 3.6 mm
Radius of curvature: 100 mm
Distance between center of holes: 12.0 mm
5/11
1-303
Plates
Plates
and Screws
Holes
10
10
12
12
14
14
16
16
Length
130 mm
130
156
156
182
182
208
208
right
left
right
left
right
left
right
left
Profile
Width: 10.1 mm
Thickness: 3.7 mm
Distance between holes: 13.0 mm
Radius of curvature: 88 mm
Holes
10
12
14
16
10
12
14
16
Length
130 mm
156
182
208
130
156
182
208
02.100.004
02.100.006
02.100.014
02.100.016
right
right
right
right
left
left
left
left
Profile
Width: 10.2 mm
Thickness: 2.7 mm
Distance between holes: 13 mm
Radius of curvature: 88 mm
Profile
Width: 10 mm
Thickness: 3.4 mm
Distance between holes: 13 mm
Radius of curvature: 60 mm
1 hole
2 holes
3 holes
02.100.325S
02.100.326S
02.100.327S
5/11
1-304
Plates
and Screws
Plates
3.5 mm Plates continued
Pediatric LCP Hip Plates
02.108.310
02.108.311
02.108.313
02.108.315
02.108.320
02.108.321
02.108.323
02.108.325
Size
3.5 mm
3.5
3.5
3.5
5.0
5.0
5.0
5.0
Angle
100
110
120
150
100
110
120
150
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
18
18
20
20
Length
93 mm
93
119
119
145
145
171
171
197
197
223
223
249
249
275
275
301
301
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
18
18
20
20
Length
93 mm
93
119
119
145
145
171
171
197
197
223
223
249
249
275
275
301
301
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Illustrations not actual size
5/11
1-305
Plates
02.120.701
02.120.702
02.120.704
02.120.706
02.120.708
02.120.710
04.120.701
04.120.702
04.120.704
04.120.706
04.120.708
04.120.710
Plates
and Screws
Holes
5
5
7
7
9
9
11
11
13
13
Length
140 mm
140
180
180
220
220
260
260
300
300
right
left
right
left
right
left
right
left
right
left
Available
Holes
5
5
7
7
9
9
11
11
13
13
Length
140 mm
140
180
180
220
220
260
260
300
300
right
left
right
left
right
left
right
left
right
left
5/11
1-306
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP Proximal Tibia Plates
239.934
239.935
239.936
239.937
239.938
239.939
239.940
239.941
239.942
239.943
239.944
239.945
239.946
239.947
Holes
Length
4
4
6
6
8
8
10
10
12
12
14
14
16
16
81 mm
81
107
107
133
133
159
159
185
185
211
211
237
237
right
left
right
left
right
left
right
left
right
left
right
left
right
left
439.934
439.935
439.936
439.937
439.938
439.939
439.940
439.941
439.942
439.943
439.944
439.945
439.946
439.947
Holes
Length
4
4
6
6
8
8
10
10
12
12
14
14
16
16
81 mm
81
107
107
133
133
159
159
185
185
211
211
237
237
right
left
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-307
Plates
Plates
and Screws
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Length
76
76
102
102
128
128
154
154
180
180
206
206
232
232
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Length
76
76
102
102
128
128
154
154
180
180
206
206
232
232
right
left
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-308
Plates
and Screws
Plates
3.5 mm Plates continued
Titanium LC-DCP Lateral Tibial Head Buttress Plates
For use with 4.5 mm Titanium Cortex Screws
Holes in plate head accept 6.5 mm Titanium Cancellous Bone Screws
440.515
440.525
Shaft
5 holes, for right tibia
5 holes, for left tibia
Length
130 mm
130
440.517
440.527
166
166
440.519
440.529
202
202
440.521
440.531
238
238
440.523
440.533
274
274
Profile
Thickness: 4.5 mm
Distance between center of holes: 18.0 mm
240.403
240.503
240.404
240.504
Shaft
3 holes, for right tibia
3 holes, for left tibia
4 holes, for right tibia
4 holes, for left tibia
Length
87 mm
87
103
103
240.46
240.56
118
118
240.47
240.57
149
149
240.48
240.58
181
181
240.49
240.59
210
210
240.50
240.60
240
240
Profile
Width: 14.0 mm
Thickness: 3.8 mm
Distance between center of holes: 16.0 mm
5/11
1-309
Plates
Plates
and Screws
241.004
241.005
241.006
241.007
241.008
241.009
241.010
241.011
241.012
241.013
241.014
241.015
241.016
241.017
Length
60 mm
60
85
85
111
111
137
137
163
163
189
189
215
215
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
109
109
135
135
161
161
187
187
213
213
239
239
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
109
109
135
135
161
161
187
187
213
213
239
239
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-310
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP Medial Distal Tibia Plates, without tab
238.700
238.701
238.702
238.703
238.704
238.705
238.706
238.707
238.708
238.709
238.710
238.711
Holes
Length
4
4
6
6
8
8
10
10
12
12
14
14
116 mm
116
142
142
168
168
194
194
220
220
246
246
right
left
right
left
right
left
right
left
right
left
right
left
Profile
Shaft width: 13.5 mm
Shaft thickness: 3.7 mm
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
116 mm
116
142
142
168
168
194
194
220
220
246
246
right
left
right
left
right
left
right
left
right
left
right
left
239.900
239.901
239.904
239.905
239.908
239.909
239.912
239.913
239.916
239.917
239.920
239.921
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
116 mm
116
142
142
168
168
194
194
220
220
246
246
right
left
right
left
right
left
right
left
right
left
right
left
Profile
Shaft width: 11 mm
Shaft thickness: 3.7 mm
5/11
1-311
Plates
Plates
and Screws
Holes
6
6
8
8
10
10
12
12
14
14
16
16
18
18
Length
95 mm
95
121
121
147
147
173
173
199
199
225
225
251
251
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
Profile
Distal segment
Shaft
Thickness:
Width:
2.2 mm
10.2 mm
3.3 mm
11.0 mm
Holes
6
6
8
8
10
10
12
12
14
14
16
16
18
18
Length
95 mm
95
121
121
147
147
173
173
199
199
225
225
251
251
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
240.064
240.065
240.066
240.067
240.068
240.069
240.070
240.071
240.072
240.073
240.074
240.075
240.076
Holes
4
5
6
7
8
9
10
11
12
13
14
15
16
Length
74 mm
88
104
120
136
152
168
184
200
216
232
248
264
Profile:
Width: 14.9 mm
Thickness: 1.2 mm
5/11
1-312
Plates
and Screws
Plates
3.5 mm Plates continued
3.5 mm LCP Anterolateral Distal Tibia Plates
241.440
241.441
241.442
241.443
241.444
241.445
241.446
241.447
241.448
241.449
241.450
241.451
241.452
241.453
241.454
241.455
241.456
241.457
Holes
5
5
7
7
9
9
11
11
13
13
15
15
17
17
19
19
21
21
Length
80 mm
80
106
106
132
132
158
158
184
184
210
210
236
236
262
262
288
288
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
441.440
441.441
441.442
441.443
441.444
441.445
441.446
441.447
441.448
441.449
441.450
441.451
441.452
441.453
441.454
441.455
441.456
441.457
Holes
5
5
7
7
9
9
11
11
13
13
15
15
17
17
19
19
21
21
Length
80 mm
80
106
106
132
132
158
158
184
184
210
210
236
236
262
262
288
288
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-313
Plates
Plates
and Screws
02.100.032S
02.100.033S
04.100.032S
04.100.033S
241.618
241.619
241.622
241.623
241.624
241.625
241.626
241.627
Length
64 mm
64
69
69
76
76
81
81
mini
mini
short
short
long
long
extra long
extra long
right
left
right
left
right
left
right
left
Profile:
Thickness: 2.0 mm (at holes)
Calcaneal Plates
For use with 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws
Note: Can be used for either right or left calcaneus
241.61
241.62
Length
60 mm
70
Distance
Between Holes
9 mm
10.5
Profile:
Thickness: 1.2 mm
441.61
441.62
Length
60 mm
70
Distance
Between Holes
9 mm
10.5
5/11
1-314
Plates
and Screws
Plates
3.5 mm Plates continued
241.65
Calcaneal Y-Plate, 87 mm
For use with 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws
441.65
Cannulated blade allows placement over a 2.0 mm guide wire. The three proximal
holes accept either 3.5 mm Cortex Screws or 4.0 mm Cancellous Bone Screws.
The remaining holes accept 3.5 mm Cortex Screws.
3.5 mm 90 Cannulated LC-Angled Blade Plates
232.046
232.047
232.048
232.049
232.056
232.057
232.058
232.059
232.066
232.067
232.068
232.069
232.086
232.087
232.088
232.089
232.006
232.007
232.008
232.009
Profile
Blade Width: 9.2 mm
5/11
1-315
Plates
Plates
and Screws
432.046
432.047
432.048
432.049
432.056
432.057
432.058
432.059
432.066
432.067
432.068
432.069
432.086
432.087
432.088
432.089
432.006
432.007
432.008
432.009
Profile
Blade Width: 9.2 mm
5/11
1-316
Plates
and Screws
Plates
3.5 mm Plates continued
90 Infant Osteotomy PlatesDCP
236.250
236.260
236.350
236.360
236.352
236.354
Blade Length
25 mm
32
25
32
37
42
Displacement
7 mm
7
12
12
12
12
Profile
Height: 46.0 mm
Shaft: 11.0 mm x 2.0 mm
Blade: T-profile 2.0 mm x 8.0 mm
Distance between holes: 10 mm
236.2
90
These plates have a 90 or 100 blade-to-plate angle and 3 holes in the shaft. Blade length
is measured from the inner side of the plate/blade junction.
For use with 3.5 mm Cortex Screws
Toddler Osteotomy PlatesDCP, 90 or 100 angle
236.001
236.002
236.003
236.011
236.012
236.013
Angle
90
90
90
90
90
90
Blade Length
26 mm
32
38
26
32
38
Displacement
4 mm
4
4
8
8
8
236.101
236.102
236.103
236.104
236.111
236.112
236.113
236.114
100
100
100
100
100
100
100
100
26 mm
32
38
44
26
32
38
44
4 mm
4
4
4
8
236.001
8
8
90
8
Profile
236.013
90
Height: 67 mm
Shaft: 11 mm x 2.5 mm/3.2 mm
Blade: T-profile 3.2 mm x 9.5 mm
Distance between holes: 14.0 mm
5/11
1-317
Plates
Plates
and Screws
Angle
80
80
Blade Length
35 mm
45
Displacement
8 mm
8
235.270
235.290
90
90
35 mm
45
8 mm
8
235.370
235.390
100
100
35 mm
45
8 mm
8
Profile
235.1
235.2
80
Height: 74.5 mm
Shaft: 11.3 mm x 3.5 mm/4.2 mm
Blade: T-profile 4.5 mm x 11.3 mm
Distance between holes: 16.0 mm
235.3
90
100
These plates have 90 or 100 blade-to-plate angles and three holes in the shaft.
Blade length is measured from the inner side of the plate/blade junction.
For use with 4.5 mm Cortex Screws
Adolescent Osteotomy PlatesDCP
235.600
235.680
235.720
235.700
235.780
AngleBlade Length
90
50 mm
90
40
90
60
90
50
90
40
235.601
235.681
235.701
235.721
235.781
100
100
100
100
100
Displacement
10 mm
10
15
15
15
50
40
50
60
40
10
10
15
15
15
Profile
235.6
90
Height: 78.0 mm
Shaft: 14.0 mm x 4.5 mm/5.3 mm
Blade: T-profile 5.0 mm/11.7 mm
Distance between holes: 16.0 mm
These plates have a 115 blade-to-plate angle and two holes in the shaft.
Blade length is measured from the inner side of the plate/blade junction.
For use with 3.5 mm Cortex Screws
115 Bifurcated Plates
236.400
236.430
Blade Length
30 mm
35
Displacement
5 mm
5
Height
52 mm
54
Plate Width
10 mm
11
Profile
Thickness: 1.1 mm
5/11
1-318
Plates
and Screws
Plates
4.5 mm Plates
4.5 mm Narrow LCP Plates
For use with 4.0 mm and 5.0 mm Locking Screws,
4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
224.521
224.531
224.541
224.551
224.561
224.571
224.581
224.591
224.601
224.611
224.621
224.631
224.641
224.651
224.661
224.681
224.701
224.721
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
44 mm
62
80
8
116
134
152
170
188
206
224
242
260
278
296
332
368
404
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between center of holes: 18.5 mm
Use Threaded Drill Guides (321.445) and (321.449) for locking screw insertion.
4.5 mm Titanium Narrow LCP Plates
424.521
424.531
424.541
424.551
424.561
424.571
424.581
424.591
424.601
424.611
424.621
424.631
424.641
424.651
424.661
424.681
424.701
424.721
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
44 mm
62
80
8
116
134
152
170
188
206
224
242
260
278
296
332
368
404
5/11
1-319
Plates
Plates
and Screws
224.753
224.754
224.755
224.756
224.757
224.758
224.759
224.761
224.763
224.765
Holes
8
9
10
11
12
13
14
16
18
20
Length
118 mm
136
154
172
190
208
226
262
298
334
Profile
Width: 11 mm
Thickness: 4.2 mm
Distance between shaft holes: 13.5 mm
Holes
8
9
10
11
12
13
14
16
18
20
Length
118 mm
136
154
172
190
208
226
262
298
334
5/11
1-320
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm Broad LCP Plates
For use with 4.0 mm and 5.0 mm Locking Screws,
4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Holes
6
7
8
9
10
11
12
14
16
18
20
22
226.561
226.571
226.581
226.591
226.601
226.611
226.621
226.641
226.661
226.681
226.701
226.721
Length
116 mm
134
152
170
188
206
224
260
296
332
368
404
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between holes: 18.0 mm
426.561
426.571
426.581
426.591
426.601
426.611
426.621
426.641
426.661
426.681
426.701
426.721
Length
116 mm
134
152
170
188
206
224
260
296
332
368
404
Use Threaded Drill Guides (321.445) and (321.449) for locking screw insertion.
02.161.240
02.161.242
02.161.244
02.161.246
02.161.248
02.161.250
02.161.252
04.161.240
04.161.242
04.161.244
04.161.246
04.161.248
04.161.250
04.161.252
Available
5/11
1-321
Plates
Plates
and Screws
226.622
226.632
226.642
226.652
226.662
226.672
226.682
226.702S
226.772S
226.742S
226.762S
Holes
12
13
14
15
16
17
18
20
22
24
26
Length
229 mm
247
265
282
300
318
336
372 (sterile only)
408 (sterile only)
443 (sterile only)
479 (sterile only)
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between holes: 18 mm
426.622
426.632
426.642
426.652
426.662
426.672
426.682
426.702S
426.772S
426.742S
426.762S
Holes
12
13
14
15
16
17
18
20
22
24
26
Length
229 mm
247
265
282
300
318
336
372 (sterile only)
408 (sterile only)
443 (sterile only)
479 (sterile only)
240.141
240.161
240.181
Holes
4
6
8
Length
83 mm
115
147
Holes
4
6
8
Length
83 mm
115
147
Use Threaded Drill Guides (321.445) and (321.449) for locking screw insertion.
Illustrations not actual size
R
5/11
1-322
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm LCP Straight Reconstruction Plates
For use with 4.0 mm and 5.0 mm Locking Screws,
4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
229.331
229.341
229.351
229.361
229.371
229.381
229.391
Holes
3
4
5
6
7
8
9
Length
56 mm
75
94
113
132
151
170
229.401
229.411
229.421
229.431
229.441
229.451
229.461
Holes
10
11
12
13
14
15
16
Length
189 mm
208
227
246
265
284
303
Holes
3
4
5
6
7
8
9
Length
56 mm
75
94
113
132
151
170
429.401
429.411
429.421
429.431
429.441
429.451
429.461
Holes
10
11
12
13
14
15
16
Length
189 mm
208
227
246
265
284
303
Holes
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Length
45 mm
61
77
93
109
125
141
157
173
189
205
221
237
253
Profile
Width: 12.0 mm
Thickness: 3.0 mm
Distance between center of holes: 15.0 mm
5/11
1-323
Plates
Plates
and Screws
Holes
6
7
8
9
10
11
12
14
16
18
20
22
Length
106 mm
124
142
160
178
196
214
250
286
322
358
394
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between center holes: 18.0 mm
Holes
6
7
8
9
10
11
12
14
16
18
20
22
24
Length
106 mm
124
142
160
178
196
214
250
286
322
358
394
430
5/11
1-324
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm Narrow LC-DCP Plates
224.52
224.53
224.54
224.55
224.56
224.57
224.58
224.59
224.60
224.61
224.62
224.63
224.64
224.65
224.66
224.68
224.70
224.72
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
34 mm
52
70
88
106
124
142
160
178
196
214
232
250
268
286
323
358
394
Top View
Bottom View
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between center of holes: 18.0 mm
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
Length
34 mm
52
70
88
106
124
142
160
178
196
214
232
250
268
286
323
358
394
5/11
1-325
Plates
Plates
and Screws
Holes
6
7
8
9
10
12
14
16
18
20
22
24
26
Length
103 mm
119
135
151
167
199
231
263
295
326
358
390
423
Profile
Width: 16.0 mm
Thickness: 4.8 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 25.0 mm
Holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
22
24
Length
39 mm
55
71
87
103
119
135
151
167
183
199
215
231
247
263
295
326
358
390
Profile
Width: 12.0 mm
Thickness: 3.8 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 25.0 mm
5/11
1-326
Plates
and Screws
Plates
4.5 mm Plates continued
Lengthening Plates
For use with 4.5 mm Cortex Screws
6.5 mm Cancellous Bone Screws fit into the end holes.
The Articulated Tension Device (321.12) may be used with these plates for distraction.
4.5 mm Broad Lengthening Plates
227.11
227.12
227.13
227.14
227.15
227.16
227.17
227.18
227.81
227.82
227.83
227.84
Holes
10
10
10
10
10
10
10
10
8
8
8
8
Length
179 mm
189
199
209
219
229
239
249
Amount of Lengthening
50 mm
60
70
80
90
100
110
120
135 mm
145
155
165
30 mm
40
50
60
Profile
Width: 16.0 mm
Thickness: 4.8 mm
Distance between center holes: 12.0 mm
228.81
228.82
228.83
228.84
228.85
228.86
224.041
Holes
8
8
8
8
8
8
Length
135 mm
145
155
165
175
185
Amount of Lengthening
30 mm
40
50
60
70
80
Profile
Width: 12.0 mm
Thickness: 3.8 mm
Distance between center of holes: 12.0 mm
5/11
1-327
Plates
Plates
and Screws
Holes
2
3
4
5
6
7
8
9
10
11
12
Length
39 mm
55
71
87
103
119
135
151
167
183
199
Profile
(Half of a tube)
Width: 12.0 mm
Thickness: 1.0 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 26.0 mm
L-Buttress Plates
240.44
240.54
Shaft
4 holes, angled left (for right tibia)
4 holes, angled right (for left tibia)
Length
86 mm
86
240.405
240.505
101
101
240.406
240.506
115
115
240.407
240.507
132
132
240.408
240.508
148
148
240.409
240.509
162
162
240.410
240.510
181
181
240.411
240.511
196
196
240.412
240.512
214
214
Profile
Width: 14.0 mm
Thickness: 3.8 mm
Distance between center of holes: 16.0 mm
440.44
440.54
Shaft
4 holes, angled left (for right tibia)
4 holes, angled right (for left tibia)
Length
86 mm
86
5/11
1-328
Plates
and Screws
Plates
4.5 mm Plates continued
T-Plates
240.13
240.14
240.15
240.16
240.18
Shaft
3 holes
4
5
6
8
Length
68 mm
84
100
116
148
Titanium T-Plates
440.13
440.14
440.15
440.16
440.18
Shaft
3 holes
4
5
6
8
Length
68 mm
84
100
116
148
T-Buttress Plates
240.34
240.35
240.36
240.307
240.308
240.309
240.310
240.311
240.312
Shaft
4 holes
5
6
7
8
9
10
11
12
Length
80 mm
96
112
128
144
160
176
192
208
Shaft
4 holes
5
6
Length
80 mm
96
112
Spoon Plates
240.05
240.06
Shaft
5 holes
6
Length
100 mm
120
Shaft
5 holes
6
Length
100 mm
120
Illustrations not actual size
5/11
1-329
Plates
Plates
and Screws
Shaft
8 holes
9
10
11
Length
170 mm
186
202
218
Holes
2
4
6
8
10
12
14
16
18
Length
133 mm
169
205
241
277
313
349
385
421
240.80
Holes
2
2
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Length
139 mm
139
175
175
211
211
247
247
283
283
319
319
355
355
391
391
right
left
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Hook PlateDCP
4 holes in shaft, 128 mm
For use with 4.5 mm Cortex Screws
5/11
1-330
Plates
and Screws
Plates
4.5 mm Plates continued
For use with 5.0 mm Locking Screws, 4.5 mm Cortex Screws, and LCP DHHS Helix Blades.
LCP DHHS Sideplates, standard barrel (38 mm)
130, 135, 140, 145, 150
Angle
Holes
Shaft Length
282.600
282.601
282.602
282.603
282.604
282.605
282.606
282.607
282.608
130
130
130
130
130
130
130
130
130
2
3
4
5
6
8
10
12
14
54 mm
72
90
108
126
162
198
234
270
282.610
282.611
282.612
282.613
282.614
282.615
282.616
282.617
282.618
282.619
282.620
282.621
135
135
135
135
135
135
135
135
135
135
135
135
2
3
4
5
6
8
10
12
14
16
18
20
54 mm
72
90
108
126
162
198
234
270
306
342
378
282.630
282.631
282.632
282.633
282.634
282.635
282.636
282.637
282.638
282.639
140
140
140
140
140
140
140
140
140
140
2
3
4
5
6
8
10
12
14
16
54 mm
72
90
108
126
162
198
234
270
306
282.640
282.641
282.642
282.643
282.644
282.645
282.646
282.647
282.648
282.649
145
145
145
145
145
145
145
145
145
145
2
3
4
5
6
8
10
12
14
16
54 mm
72
90
108
126
162
198
234
270
306
282.650
282.651
282.652
282.653
282.654
282.655
282.656
282.657
282.658
282.659
282.660
282.661
150
150
150
150
150
150
150
150
150
150
150
150
2
3
4
5
6
8
10
12
14
16
18
20
54 mm
72
90
108
126
162
198
234
270
306
342
378
Available
5/11
1-331
Plates
Plates
and Screws
Holes
Shaft Length
282.670
282.671
282.672
282.673
282.674
130
130
130
130
130
2
3
4
5
6
54 mm
72
90
108
126
282.676
282.677
282.678
282.679
282.680
135
135
135
135
135
2
3
4
5
6
54 mm
72
90
108
126
282.681
282.682
282.683
282.684
282.685
140
140
140
140
140
2
3
4
5
6
54 mm
72
90
108
126
282.686
282.687
282.688
282.689
282.690
145
145
145
145
145
2
3
4
5
6
54 mm
72
90
108
126
282.691
282.692
282.693
282.694
282.695
150
150
150
150
150
2
3
4
5
6
54 mm
72
90
108
126
Available
5/11
1-332
Plates
and Screws
Plates
4.5 mm Plates continued
For use with 4.5 mm Cortex Screws and DHS/DCS Lag Screws
DHS PlatesStandard Barrel (38 mm)DCP
130, 135, 140, 145, 150
281.021
281.031
281.040
281.050
281.060
281.081
281.010
281.012
281.014
Angle
130
130
130
130
130
130
130
130
130
Holes
2
3
4
5
6
8
10
12
14
Shaft
46 mm
62
78
94
110
142
174
206
238
281.102
281.131
281.140
281.150
281.160
281.180
281.100
281.110
281.130
281.170
281.190
281.020
135
135
135
135
135
135
135
135
135
135
135
135
2
3
4
5
6
8
10
12
14
16
18
20
46 mm
62
78
94
110
142
174
206
238
270
302
333
281.220
281.230
281.240
281.250
281.260
281.280
281.200
281.212
281.214
281.216
140
140
140
140
140
140
140
140
140
140
2
3
4
5
6
8
10
12
14
16
46 mm
62
78
94
110
142
174
206
238
270
281.320
281.330
281.340
281.350
281.360
281.308
281.310
281.312
281.314
281.316
145
145
145
145
145
145
145
145
145
145
2
3
4
5
6
8
10
12
14
16
46 mm
62
78
94
110
142
174
206
238
270
281.402
281.430
281.440
281.450
281.460
281.480
281.400
281.410
281.414
281.416
281.418
281.421
150
150
150
150
150
150
150
150
150
150
150
150
2
3
4
5
6
8
10
12
14
16
18
20
46 mm
62
78
94
110
142
174
206
238
270
302
333
Profile
Shaft: 19.0 mm x 5.8 mm
Barrel: 12.6 mm dia.
5/11
1-333
Plates
Plates
and Screws
Angle
130
130
130
130
130
Holes
2
3
4
5
6
Shaft
46 mm
62
78
94
110
281.520
281.530
281.540
281.550
281.560
135
135
135
135
135
2
3
4
5
6
46 mm
62
78
94
110
281.620
281.630
281.640
281.650
281.660
140
140
140
140
140
2
3
4
5
6
46 mm
62
78
94
110
281.720
281.730
281.740
281.750
281.760
145
145
145
145
145
2
3
4
5
6
46 mm
62
78
94
110
281.820
281.830
281.840
281.850
281.860
150
150
150
150
150
2
3
4
5
6
46 mm
62
78
94
110
5/11
1-334
Plates
and Screws
Plates
4.5 mm Plates continued
02.102.001
222.250
222.251
222.252
222.253
222.254
222.255
222.256
222.257
222.258
222.259
422.250
422.251
422.252
422.253
422.254
422.255
422.256
422.257
422.258
422.259
right
left
right
left
right
left
right
left
right
left
Holes
6
6
8
8
10
10
12
12
14
14
16
16
18
18
Length
170 mm
170
206
206
242
242
278
278
314
314
350
350
386
386
For
right femur
left femur
right femur
left femur
right femur
left femur
right femur
left femur
right femur
left femur
right femur
left femur
right femur
left femur
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between center of holes: 18.0 mm
Use threaded Wire Guides (324.174) and (324.175) and Drill Guide (324.176) for insertion of locking and conical screws.
Illustrations not actual size
5/11
1-335
Plates
Plates
and Screws
02.001.320
02.001.300
02.001.322
02.001.302
02.001.324
02.001.304
02.001.326
02.001.306
02.001.328
02.001.308
02.001.330
02.001.310
02.001.332
02.001.312
Holes
10
10
12
12
14
14
16
16
18
18
20
20
22
22
Length
242 mm
242
278
278
314
314
350
350
386
386
422
422
458
458
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between holes: 18.0 mm
For use with 4.5 mm Cortex Screws and short (50 mm70 mm) DHS/DCS Lag Screws
The two round screw holes placed close to the barrel accept 6.5 mm Cancellous Bone Screws for additional
stabilization of condylar or trochanteric fragments. The DCP holes accept either 4.5 mm Cortex or
6.5 mm Cancellous Bone Screws for secure fixation to the femoral shaft.
95 DCS PlatesDCP
Barrel Length 25 mm
281.960
281.980
281.900
281.920
281.930
281.940
281.950
281.970
281.990
Angle
95
95
95
95
95
95
95
95
95
Holes
6
8
10
12
14
16
18
20
22
Shaft
114 mm
146
178
210
242
274
306
338
370
5/11
1-336
Plates
and Screws
Plates
4.5 mm Plates continued
All condylar plates have a 95 angle between the blade and plate shaft. Blade length is measured from
the inner side of the plate/blade junction. The two holes next to the blade are round and accept either
4.5 mm Cortex or 6.5 mm Cancellous Bone Screws. The remaining holes are DCP holes for 4.5 mm Cortex
Screws. The last hole is notched to accept the Articulated Tension Device (321.12).
95 Condylar PlatesDCP
237.50
237.52
237.54
237.56
237.70
237.72
237.74
237.76
237.90
237.92
237.94
237.96
237.20
237.22
237.24
237.26
5/11
1-337
Plates
Plates
and Screws
437.50
437.52
437.54
437.56
437.70
437.72
437.74
437.76
437.90
437.92
437.94
437.96
437.20
437.22
437.24
437.26
Profile
Shaft: Profile similar to broad plates
Width: 16.0 mm
Thickness: 4.8 mm
Distance between center of holes: 16.0 mm
Blade: U-profile 6.5 mm x 16.0 mm
Shaft
7 holes, for right femur
7 holes, for left femur
Length
177 mm
177
440.549
440.569
213
213
440.551
440.571
249
249
Profile
440.553
440.573
285
285
Width: 17.5 mm
Thickness: 6.0 mm
Distance between center of holes: 18.0 mm
440.555
440.575
321
321
5/11
1-338
Plates
and Screws
Plates
4.5 mm Plates continued
Condylar Buttress PlatesDCP
For use with 4.5 mm Cortex Screws
Holes in plate heads accept 6.5 mm Cancellous Bone Screws, or 7.0 mm or 7.3 mm Cannulated Screws
240.92
240.94
Shaft
7 holes, for left femur
7 holes, for right femur
Length
158 mm
158
240.93
240.95
190
190
240.70
240.73
221
221
240.71
240.74
253
253
240.72
240.75
285
285
Profile
Width: 16.0 mm
Thickness: 5.0 mm
Distance between center of holes: 16.0 mm
282.58
282.50
282.52
282.54
282.78
282.70
282.72
282.74
282.98
282.90
282.92
282.94
Profile
Shaft: 14 mm x 4.5 mm/5.2 mm
Blade: T-profile 5.0 mm x 11.7 mm
5/11
1-339
Plates
Plates
and Screws
Holes
5
5
9
9
13
13
Length
156 mm
156
236
236
316
316
422.390
right
left
right
left
right
left
Holes
5
5
9
9
13
13
Length
140 mm
140
220
220
300
300
right
left
right
left
right
left
440.843
440.853
440.864
440.874
440.885
440.895
5/11
1-340
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm LCP Medial Proximal Tibia Plates
239.984
239.985
239.986
239.987
239.988
239.989
239.990
239.991
239.992
239.993
239.994
239.995
239.996
239.997
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Length
106 mm
106 mm
142 mm
142 mm
178 mm
178 mm
214 mm
214 mm
250 mm
250 mm
286 mm
286 mm
322 mm
322 mm
right
left
right
left
right
left
right
left
right
left
right
left
right
left
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Length
106 mm
106 mm
142 mm
142 mm
178 mm
178 mm
214 mm
214 mm
250 mm
250 mm
286 mm
286 mm
322 mm
322 mm
right
left
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-341
Plates
Plates
and Screws
240.036
240.037
240.038
240.039
240.040
240.041
240.042
240.043
240.044
240.045
240.046
240.047
240.048S
240.049S
240.052S
240.053S
240.054S
240.055S
Holes
4
4
6
6
8
8
10
10
12
12
14
14
16
16
18
18
20
20
Length
82mm
82
118
118
154
154
190
190
226
226
262
262
298
298
334
334
370
370
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia (sterile only)
left tibia (sterile only)
right tibia (sterile only)
left tibia (sterile only)
right tibia (sterile only)
left tibia (sterile only)
Available
Holes
4
4
6
6
8
8
10
10
12
12
14
14
Length
82 mm
82
118
118
154
154
190
190
226
226
262
262
right
left
right
left
right
left
right
left
right
left
right
left
5/11
1-342
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm Proximal Tibia Plates
For use with 4.5 mm Cortex, 6.5 mm Cancellous Bone and 7.0 mm and 7.3 mm Cannulated Screws.
Three small proximal holes allow use of Kirschner wires or sutures.
240.002
240.003
240.004
240.005
240.006
240.007
240.008
240.009
240.010
240.011
240.012
240.013
240.014
240.015
Holes
in Shaft
2
2
4
4
6
6
8
8
10
10
12
12
14
14
Length
41 mm
41
73
73
109
109
145
145
181
181
217
217
253
253
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
Holes
6
6
8
8
10
10
12
12
14
14
Length
125 mm
125
161
161
197
197
233
233
269
269
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
Profile
Width: 14.0 mm
Thickness: 3.8 mm
Distance between center of holes: 16.0 mm
Holes
6
6
8
8
10
10
12
12
14
14
Length
125 mm
125
161
161
197
197
233
233
269
269
For
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
right tibia
left tibia
5/11
1-343
Plates
Plates
and Screws
237.043
237.044
237.053
237.054
237.063
237.064
237.083
237.084
237.085
237.086
237.103
237.104
237.105
237.106
237.123
237.124
237.125
237.126
237.143
237.144
237.145
237.146
Profile
Blade: 11.7 mm width
5/11
1-344
Plates
and Screws
Plates
4.5 mm Plates continued
4.5 mm 90 Titanium Cannulated LC-Angled Blade Plates
437.043
437.044
437.053
437.054
437.063
437.064
437.083
437.084
437.085
437.086
437.103
437.104
437.105
437.106
437.123
437.124
437.125
437.126
437.143
437.144
437.145
437.146
Profile
Blade: 11.7 mm width
Implants available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
5/11
1-345
Plates
Plates
and Screws
283.40
283.42
283.44
283.46
283.60
283.62
283.64
283.66
283.90
283.92
283.94
283.96
Profile
Shaft: 14 mm x 4.5 mm/5.2 mm
Blade: T-profile 5.0 mm x 11.7 mm
5/11
1-346
Plates
and Screws
Plates
4.5 mm Plates continued
All 238./438. series plates have a 130 angle between the blade and the plate shaft. Blade length is measured
from the inner side of the plate/blade junction. Plates with 6 or more holes can be used with the Articulated
Tension Device (321.12).
For use with 4.5 mm Titanium Cortex Screws
130 Titanium Angled Blade PlatesDCP
438.36
438.38
438.44
438.45
438.46
438.47
438.48
438.49
438.40
438.41
438.42
438.60
438.62
438.64
438.66
438.68
438.94
438.96
438.98
438.24
438.26
438.28
5/11
1-347
Plates
Plates
and Screws
Angle
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
Blade Length
50 mm
55
60
65
70
40
50
60
70
50
55
60
65
70
40
239.30
239.32
100
100
50
60
239.43
239.45
239.47
110
110
110
65
75
85
239.53
239.55
239.57
120
120
120
65
75
85
239.83
239.85
239.86
239.87
239.88
239.89
239.80
239.81
130
130
130
130
130
130
130
130
65
75
80
85
90
95
100
105
239.28
239.70
Displacement
10 mm
10
10
10
10
10
20
20
20
15
15
15
15
15
15
10
10
Profile
90
90
239.62
239.32
90
Height: 94.0 mm
Shaft: Profile similar to broad plates
Blade: U-profile 6.5 mm x 16.0 mm
100
5/11
1-348
Plates
and Screws
Plates
4.5 mm Plates continued
These plates have 90 and 100 blade-to-plate angles, 10 mm to 20 mm plate bend offsets and notched
holes for use with the Articulated Tension Device (321.12). The hole in the bend permits fixation of the
calcar with a long 4.5 mm Titanium Cortex Screw. Blade length is measured from the inner side of the
plate/blade junction. These plates have 4 holes in the shaft.
For use with 4.5 mm Titanium Cortex Screws
Titanium Adult Osteotomy PlatesDCP, Angles 90 and 100
439.20
439.21
439.22
439.23
439.24
439.25
439.28
439.60
439.61
439.62
439.63
439.64
439.65
439.70
439.71
439.72
439.73
439.74
439.76
439.78
Angle
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
Blade Length
50 mm
55
60
65
70
75
40
50
55
60
65
70
75
50
55
60
65
70
80
40
439.32
100
60
439.43
439.45
439.47
110
110
110
65
75
85
439.53
439.55
439.57
120
120
120
65
75
85
439.83
439.85
439.86
439.87
439.88
439.89
439.80
439.81
130
130
130
130
130
130
130
130
65
75
80
85
90
95
100
105
Displacement
10 mm
10
10
10
10
10
10
20
20
20
20
20
20
15
15
15
15
15
15
15
10
40
50
60
10
15
20
90
90
90
60
10
100
5/11
1-349
Plates
488.910
Plates
and Screws
Holes
3
33
Length
26 mm
266
Hole Spacing
8 mm
8
489.403
489.412
489.413
3
4
5
42 mm
58
75
16 mm
16
16
489.415
489.418
489.423
489.424
489.425
2
3
4
5
22
22 mm
34
46
58
262
12 mm
12
12
12
12
482.823
Profile
Width: 9.0 mm
Thickness: 2.7 mm
5/11
1-350
Plates
and Screws
219.96
419.96
222.578
422.578
211.890
02.224.030S
280.990
Available
5/11
1-351
281.001S
413.309
422.390
488.750
Plates
and Screws
5/11
1-352
Plates
and Screws
Instruments
Adjusting Nut
325.150
Adjusting Nut
for 3.0 mm threaded rod
328.150
Adjusting Nut
for 5.0 mm threaded rod
Aiming Arms
03.122.007
Aiming Arm
03.001.000
03.001.001
03.120.009
03.120.011
03.120.012
03.120.013
5/11
1-353
Instruments
356.800
356.801
03.100.001
03.100.101
03.120.001
03.120.004
Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plate, right
Periarticular Aiming Arm, for 4.5 mm LCP Proximal Tibia Plate, left
03.120.003
03.120.006
Oblique Aiming Guide, for Periarticular Aiming Arm for 4.5 mm LCP Proximal Tibia Plate, right
Oblique Aiming Guide, for Periarticular Aiming Arm for 4.5 mm LCP Proximal Tibia Plate, left
03.113.001
03.113.003
Aiming Arm, for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, right
Aiming Arm, for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, left
Plates
and Screws
5/11
1-354
Plates
and Screws
Instruments
Alignment Rod
03.108.030
Alignment Rod
03.108.032
03.108.031
Angle Rod
338.044
Angle Guides
338.005
338.01
338.02
338.03
338.04
130
135
140
145
150
338.047
5/11
1-355
Instruments
321.12
Plates
and Screws
Attachment Pin
03.100.048
Awl
388.01
Awl
for 2 mm hole
5/11
1-356
Plates
and Screws
Instruments
Ball Spikes
03.100.018
03.100.019
03.100.027
Round Disk
03.100.028
Rectangular Disk
03.100.120
03.100.121
398.54
5/11
1-357
Instruments
392.02
392.00
329.01
329.09
329.04
329.05
329.07
Plates
and Screws
Bending Irons
5/11
1-358
Plates
and Screws
Instruments
Bending Irons continued
329.08
329.02
329.095
Bending Pliers
03.211.005
329.12
5/11
1-359
Instruments
329.15
329.291
329.24
Plates
and Screws
5/11
1-360
Plates
and Screws
Instruments
Bending Pliers continued
329.27
329.29
03.100.031
Bending Pliers
for 3.5 mm Low Profile Reconstruction Plates
391.962
Bending/Cutting Pliers
For Titanium Distal Radius Plates and
Hybrid Fixator wires
5/11
1-361
Instruments
329.155
391.963
Plates
and Screws
Bending Pins
03.114.003
329.921
329.922
Bending Press
329.30
Plate-Bending Press
To bend straight and angled plates
To twist plates, Bending Iron (329.02) is necessary.
400 mm length
5/11
1-362
Plates
and Screws
Instruments
Bone Spreader
395.000
Cable Tensioner
391.201
Cable Tensioner
391.202
Slotted Nosepiece
For cable tensioner
03.120.021
5/11
1-363
Instruments
338.18
338.19
338.32
Plates
and Screws
Centering Sleeves
Chisels
Seating Chisels
332.17
332.172
332.19
332.12
5/11
1-364
Plates
and Screws
Instruments
Chisels continued
332.173
Cannulated Chisel
For infant osteotomy plates
332.174
Cannulated Chisel
For toddler osteotomy plates
332.175
Cannulated Chisel
For child and adolescent osteotomy plates
332.121
397.992
397.993
397.994
397.995
Chisel Guide
332.09
Chisel Guide
With adjustable angle
For Seating Chisels (332.12, 332.17)
5/11
1-365
Instruments
Plates
and Screws
Cleaning Stylets
324.053
324.253
5/11
1-366
Plates
and Screws
Instruments
Compression Sleeves
03.226.016
03.226.000
Countersinks
Countersinks
For preparing the seat of the screw head
310.971
310.972
310.88
310.87
310.89
310.99
5/11
1-367
Instruments
Plates
and Screws
Countersinks continued
Cannulated Countersinks
310.803
310.804
310.86
310.85
310.79
310.78
Coupling Screws
338.345
338.20
5/11
1-368
Plates
and Screws
Instruments
Coupling Screws continued
338.202
338.31
338.22
338.313
03.100.003
324.037
5/11
1-369
Instruments
03.108.003
319.703
319.702
319.15
319.17
319.701
Plates
and Screws
319.70
319.21
03.113.028
Depth Gauge
PHOTO NOT AVAILABLE
319.004
Depth Gauge
Measures up to 30 mm
319.006
Depth Gauge
Measures up to 50 mm
319.11
319.06
5/11
1-370
Plates
and Screws
Instruments
Depth Gauges/Measuring Devices continued
319.09
319.04
319.01
319.10
319.091
338.329
Depth Gauge
for LCP DHHS Angle Guide, variable
338.05
5/11
1-371
Instruments
323.025
323.021
03.010.106
323.060
03.226.008
03.226.002
Plates
and Screws
5/11
1-372
Plates
and Screws
Instruments
Depth Gauges/Measuring Devices continued
324.208
03.211.009
03.108.008
395.001
Depth Probe
03.122.052
Depth Probe
5/11
1-373
Instruments
03.113.023
03.113.024
03.112.003
03.122.002
Plates
and Screws
324.210
324.211
324.212
324.213
310.11
310.16
310.15
310.510
310.19
310.21
2.0 mm
2.0 mm
100 mm
125 mm
310.530
310.25
310.23
310.26
310.28
2.4 mm
2.5 mm
2.5 mm
2.7 mm
2.7 mm
03.122.051
310.284
310.288
310.229
2.8 mm
2.8 mm
2.8 mm
2.9 mm
310.31
310.29
310.02
310.35
310.37
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
145 mm
195 mm
225 mm
110 mm
195 mm
310.401
310.40
310.431
310.430
310.423
310.44
310.48
4.0 mm
4.0 mm
4.3 mm
4.3 mm
4.3 mm
4.5 mm
4.5 mm
5/11
1-374
Plates
and Screws
Instruments
Cannulated Drill Bits
Quick coupling
Diameter
310.215
Cannulation
Total Length
0.9 mm
100 mm
150 mm
310.221
2.0 mm
1.2 mm
310.67
2.7 mm
1.35 mm
160 mm
310.65
3.2 mm
1.7 mm
170 mm
310.68
3.5 mm
1.35 mm
160 mm
310.66
4.5 mm
1.7 mm
170 mm
03.226.003
4.8 mm Trapezium
155 mm
357.047
6.5 mm
330 mm
Total Length
310.634
4.3 mm
2.6 mm
200 mm
310.632
5.0 mm
2.6 mm
200 mm
310.63
5.0 mm
2.9 mm
300 mm
310.495
2.9 mm
300 mm
310.69
Jacobs chuck
4.5 mm
2.1 mm
233 mm
5/11
1-375
Instruments
Diameter
Plates
and Screws
310.10
1.1 mm
45 mm
310.14
1.5 mm
70 mm
310.20
2.0 mm
85 mm
310.24
2.5 mm (gold)
95 mm
397.342
310.27
2.7 mm
85 mm
310.32
3.2 mm
130 mm
310.36
3.5 mm
397.343
380 mm
310.45
4.5 mm
130 mm
310.49
4.5 mm
180 mm
95 mm
5/11
1-376
Plates
and Screws
Instruments
Drill Bits, mini quick coupling
Drill bits for use with the Modular Hand System, with self-stop
316.286
316.288
316.290
316.292
316.294
Diameter
For 1.0 mm screws
0.76 mm
0.76 mm
0.76 mm
0.76 mm
0.76 mm
Total Length
Self-Stop
44.5 mm
44.5 mm
44.5 mm
44.5 mm
44.5 mm
6
8
10
12
14
mm
mm
mm
mm
mm
Drill bits
316.396
310.111
03.114.007
316.402
310.141
317.861
310.201
317.871
5/11
1-377
Instruments
Plates
and Screws
44.5 mm
44.5 mm
44.5 mm
44.5 mm
44.5 mm
6 mm
8 mm
10 mm
12 mm
14 mm
60 mm
65 mm
65 mm
75 mm
90 mm
75 mm
90 mm
316.114.96
316.235.96
317.235.96
316.335.96
317.435.96
Diameter
For 1.0 mm through 1.5 mm screws
0.76 mm
1.0 mm
1.1 mm
1.3 mm
1.5 mm
Total Length
Self-Stop
44.5 mm
60 mm
65 mm
65 mm
85 mm
14 mm
35 mm
40 mm
40 mm
60 mm
5/11
1-378
Plates
and Screws
Instruments
Three-Fluted Drill Bits, quick coupling
315.92
315.93
03.111.002
Diameter
3.5 mm
4.5 mm
Total Length
225 mm
195 mm
310.507
310.161
310.162
310.509
323.062
5/11
1-379
Instruments
398.409
Plates
and Screws
Elevators
Scaphoid Elevator, 140 mm
Extraction Chisel
03.161.200
03.161.201
Forceps
03.211.400
Compression Forceps
319.97
Screw Forceps
For removing screws from screw rack
347.985
398.80
5/11
1-380
Plates
and Screws
Instruments
Forceps continued
387.53
398.95
Termite Forceps
90 mm length
398.95.96
Termite Forceps
90 mm length
For use with Modular Hand System
398.96
Stagbeetle Forceps
120 mm length
399.00
5/11
1-381
Instruments
399.091
399.122
Plates
and Screws
Forceps continued
Bone Holding Forceps
For plates to 9 mm wide
For plates to 19 mm wide
03.110.026
03.110.027
03.110.028
03.110.029
323.050
03.122.056
Insertion Guide With Nose, for 3.5 mm LCP Proximal Humerus Plates
5/11
1-382
Plates
and Screws
Instruments
Guides and Insertion Blocks continued
03.122.057
Insertion Guide Without Nose, for 3.5 mm LCP Proximal Humerus Plates
03.123.010
03.123.011
Insertion Guide, for 3.5 mm LCP Periarticular Proximal Humerus Plates, right
Insertion Guide, for 3.5 mm LCP Periarticular Proximal Humerus Plates, left
313.351
313.352
312.911
312.910
5/11
1-383
Instruments
03.108.001
03.108.002
312.947
312.946
312.941
312.940
324.011
324.012
Plates
and Screws
5/11
1-384
Plates
and Screws
Instruments
Guides and Insertion Blocks continued
324.003
324.004
324.043
Fixation Bolt
For LISS Insertion Guides
324.044
Stabilization Bolt
For LISS Insertion Guides
312.934
312.935
312.932
312.933
312.926
312.924
5/11
1-385
Instruments
312.931
312.930
Plates
and Screws
Guide Shaft
338.21
338.212
338.23
5/11
1-386
Plates
and Screws
Instruments
Hammers
332.403
332.20
Slotted Hammer
For use with
Inserter-Extractor (356.49)
Hammers
399.41
399.42
399.43
Handles
03.226.006
5/11
1-387
Instruments
393.10
311.44
338.08
DHS/DCS T-Handle
With large quick coupling
03.111.001
Plates
and Screws
Handles continued
5/11
1-388
Plates
and Screws
Instruments
Handles continued
311.01
311.01.96
311.03.96
311.43
311.431
03.113.014
03.120.022
5/11
1-389
Instruments
03.100.032
Ratcheting Handle
with quick coupling
397.705
397.706
Handle
For AO Reaming Coupler Connection
03.110.005
314.280
03.100.140
Plates
and Screws
Handles continued
5/11
1-390
Plates
and Screws
Instruments
Hex Key
03.120.029
Hooks
319.39
319.39.96
Sharp Hook
319.391
398.51
398.52
398.53
5/11
1-391
Instruments
03.100.029
03.100.030
398.56*
398.58*
398.59
Plates
and Screws
Hooks continued
398.56
398.59
Impactors
338.347
338.348
338.28
DHS/DCS Impactor
Replaces DHS/DCS Impactor (338.14)
Note: For replacement tip, order Tip for DHS/DCS Impactor (338.26)
5/11
1-392
Plates
and Screws
Instruments
Impactors continued
332.21
Impactor
Used to seat and impact Angled Blade Plates
Inserter/Extractors
332.016
Inserter/Extractor Handle
For 3.5 mm 90 Cannulated
LC-Angled Blade Plates
332.402
Inserter/Extractor Handle
For 4.5 mm 90 Cannulated
LC-Angled Blade Plates
332.16
Inserter/Extractor
with adjustable angle
For Adult and Small Statured Adult
Angled Blade Plates and Adolescent and
Child Osteotomy Plates (replaces 332.15 and 332.18)
Note: Use only the Combination Wrench (321.16)
to tighten and loosen the locking screw.
Do not use a hexagonal screwdriver.
332.352
Inserter
For bifurcated, infant and toddler osteotomy plates
332.353
Inserter
For child and adolescent osteotomy plates
5/11
1-393
Instruments
338.341
338.346
Plates
and Screws
Inserter/Extractors continued
Insertion Handle
03.122.035
Insertion Handle
For LCP Proximal Humerus Plate
03.100.002
03.100.102
Insertion Handles
for 4.5 mm LCP Proximal Tibia Plate, right
for 4.5 mm LCP Proximal Tibia Plate, left
03.113.025
03.113.026
Insertion Handles
for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, right
for 3.5 mm LCP Low Bend Medial Distal Tibia Plates, left
5/11
1-394
Plates
and Screws
Instruments
Insertion Handle continued
03.120.008
03.120.010
03.120.002
03.120.005
Insertion Sleeve
324.022
Insertion Sleeve
For 5.0 mm Titanium Locking Screws
324.027
5.0 mm Trocar
For use with 324.022
324.055
5/11
1-395
Instruments
03.120.027
Plates
and Screws
Interlocking Bolt
Interlocking Bolt, 151 mm
For Periarticular Insertion Handle for 4.5 mm LCP Proximal Tibia Plates
324.034
5/11
1-396
Plates
and Screws
Instruments
Locking Neutral Guide
03.120.014
Medialization Guide
03.108.007
Osteotomes
03.100.038
03.100.039
Pelvic Osteotomes
399.85
399.86
5/11
1-397
Instruments
399.481
399.36
399.37
399.48
399.40
Periosteal Elevators
3 mm width, curved blade, straight edge
6 mm width, curved blade, straight edge
399.361
Plates
and Screws
Periosteal Elevators
Plate Cutters
329.151
5/11
1-398
Plates
and Screws
Instruments
Plate Cutters continued
391.931
391.95
Plate-Cutting Forceps
For 1.5 mm2.7 mm plates
260 mm length
03.211.007
Plate Guides
324.170
324.171
333.20
5/11
1-399
Instruments
324.023
324.031
324.075
328.040
Plate Holder
for minimally invasive plating
328.044
Connecting Screw
for 328.040
328.335
328.345
328.344
Plates
and Screws
Plate Holders
5/11
1-400
Plates
and Screws
Instruments
Plate Holders continued
325.041
Clamping Foot
for 328.040, 3.5 mm LCP and 3.5 mm LC-DCP
328.041
328.042
328.330
328.331
Clamping Feet for 328.040 LCP, 3.5 mm Lateral Proximal Tibia, right
Clamping Feet for 328.040 LCP, 3.5 mm Lateral Proximal Tibia, left
328.340
328.341
Clamping Foot for 328.040 LCP, 4.5 mm/5.0 mm Lateral Proximal Tibia, right
Clamping Foot for 328.040 LCP, 4.5 mm/5.0 mm Lateral Proximal Tibia, left
328.310
328.311
Clamping Feet for 328.040 LCP, 2.7 mm/3.5 mm Medial Distal Tibia, right
Clamping Feet for 328.040 LCP, 2.7 mm/3.5 mm Medial Distal Tibia, left
5/11
1-401
Instruments
03.211.001
Plates
and Screws
Pliers
391.82
391.85
359.204
Locking Pliers
5/11
1-402
Plates
and Screws
Instruments
Pliers continued
391.88
313.355
313.356
313.353
313.357
5/11
1-403
Instruments
03.108.006
Plates
and Screws
Positioning Device
Positioning Device for Guiding Block
Positioning Plates
333.00
333.060
333.070
333.080
333.16
333.00
333.060
333.080
333.070
333.16
Protective Caps
392.178
392.179
Protective Sleeves
312.05
5/11
1-404
Plates
and Screws
Instruments
Protective Sleeves continued
312.08
312.02
2.8 mm Trocar
For use with 8.5 mm/2.8 mm
Wire Sleeve (312.08)
For 7.3 mm Cannulated Screws
312.09
311.449
324.033
319.186
5/11
1-405
Instruments
03.113.015
03.113.016
03.120.023
Plates
and Screws
Quick Couplings
338.49
5/11
1-406
Plates
and Screws
Instruments
Radiographic Ruler
03.110.050
Reamers
03.211.106
03.211.006
03.211.108
03.211.008
03.211.110
03.211.010
03.211.112
03.211.012
03.211.114
03.211.014
03.211.116
03.211.016
03.211.118
03.211.018
03.211.120
03.211.020
03.211.122
03.211.022
03.211.124
03.211.024
338.333
5/11
1-407
Instruments
338.13
338.43
338.46
338.11
338.44
338.47
338.332
338.442
Plates
and Screws
Reamers continued
Contoured Reamers
60 mm
56 mm
5/11
1-408
Plates
and Screws
Instruments
Reduction Forceps
03.100.020
398.89
03.100.021
03.100.022
5/11
1-409
Instruments
398.84
398.85
03.100.023
398.86
Plates
and Screws
5/11
1-410
Plates
and Screws
Instruments
Reduction Forceps continued
03.100.024
398.73
03.100.025
398.88
398.87
5/11
1-411
Instruments
398.74
398.75
Plates
and Screws
399.124
Reduction Forceps
with serrated jaw, large handle
5/11
1-412
Plates
and Screws
Instruments
Reduction Forceps continued
Reduction Forceps with points
399.97
399.97.96
399.98
398.40
398.41
398.41.96
399.97
Reduction Handle
325.020
328.020
325.030
328.030
5/11
1-413
Instruments
03.108.004
Plates
and Screws
Reduction Sleeve
Reduction Sleeve, 4.3 mm/2.8 mm
Retractors
325.010
328.010
328.011
328.012
Retractors (Hohmann-Style)
399.18
399.18.96
399.19
399.19.96
399.195
5/11
1-414
Plates
and Screws
Instruments
Retractors continued
399.197
399.27
398.55
399.45
399.49
Hohmann-Style Retractors
20 mm width, with broad shank, 120 mm length
15 mm width, with broad shank, 160 mm length
Routers
332.05
Router
For use with Jacobs chuck
332.06
Router
Quick coupling
5/11
1-415
Instruments
332.356
Saw Guide
For infant osteotomy plates
332.355
Saw Guide
For toddler osteotomy plates
332.354
Saw Guide
For child and adolescent osteotomy plates
Plates
and Screws
Saw Guides
Scalpel Handles
03.113.011
03.120.016
Scalpel Handle, for use with LCP Small Fragment Percutaneous Instrument Set
Scalpel Handle, for Periarticular Aiming Instrument Set, Large
03.113.021
5/11
1-416
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
314.118
314.164
314.163
03.114.009
314.467
314.468
5/11
1-417
Instruments
03.114.002
03.113.019
324.201
314.116
Plates
and Screws
03.100.045
314.119
324.250
5/11
1-418
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
03.010.150
03.010.151
03.010.152
314.02
314.06
314.070
314.57
314.09
5/11
1-419
Instruments
314.075
Hexagonal Screwdriver
2.5 mm, with ergonomic handle
(part of the Modular Foot system)
314.03
Plates
and Screws
314.55
314.27
314.26
5/11
1-420
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
324.052
314.04
388.135
313.93
5/11
1-421
Instruments
314.11
314.152
314.56
Plates
and Screws
03.100.033
314.15
314.17
5/11
1-422
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
03.100.105
324.050
314.16
03.226.004
314.466
314.29
5/11
1-423
Instruments
314.08
314.20
Plates
and Screws
314.31
314.19
314.05
5/11
1-424
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
314.10
314.80
314.22
314.23
03.100.106
5/11
1-425
Instruments
313.99
313.94.96*
313.97.96
314.48.96*
314.411.96*
314.67.96*
314.67.97
Plates
and Screws
5/11
1-426
Plates
and Screws
Instruments
Screwdrivers and Holding Sleeves continued
313.991*
313.992*
313.993*
314.465
314.461
314.464
5/11
1-427
Instruments
314.291
Plates
and Screws
Sliding Mechanism
Sliding Mechanism
for Collinear Reduction Clamp
Stoppers
03.113.017
03.120.025
324.019
Stopper
For LISS Insertion guides
5/11
1-428
Plates
and Screws
Instruments
Taps
Taps, mini quick coupling
For use with Handles (310.95) and (311.01)
311.15
311.19
311.21
311.28
311.32
311.33
311.400
311.46
311.48
5/11
1-429
Instruments
388.06
311.31
311.47
Plates
and Screws
Taps continued
Cannulated Taps
311.63
311.59
311.689
311.69
311.682
5/11
1-430
Plates
and Screws
Instruments
Taps continued
311.34
388.05
311.66
328.140
Cannulated Tap
for 5.0 mm threaded rod, 195 mm
338.17
338.175
Templates
03.111.531
03.111.530
03.111.630
03.111.631
03.111.730
03.111.731
329.599
Bending Template
For Dorsal Distal Radius Plates
5/11
1-431
Instruments
329.598
Bending Template
For Volar Distal Radius Plates
329.930
329.931
329.932
329.933
329.934
329.935
332.017
332.018
332.019
Bending Templates
For 3.5 mm 90 Cannulated LC-Angled Blade Plates
4 hole
6 hole
10 hole
329.905
329.908
329.912
03.100.034
Plates
and Screws
Templates continued
Bending Template
For 3.5 mm Low Profile Reconstruction Plates, 20 holes
5/11
1-432
Plates
and Screws
Instruments
Templates continued
03.100.035
Bending Template
For 3.5 mm Low Profile Reconstruction J-Plates, 16 holes
03.100.036
Bending Template
For 3.5 mm LCP Curved Reconstruction Plate
88 mm radius, 16 holes
03.100.037
Bending Template
For 3.5 mm LCP Curved Reconstruction Plate
108 mm radius, 16 holes
329.64
329.68
5/11
1-433
Instruments
329.66
329.513
329.917
Bending Template
For Condylar Buttress Plates
329.918
Bending Template
For LC-DCP Condylar Buttress Plates
Plates
and Screws
Templates continued
5/11
1-434
Plates
and Screws
Instruments
Templates continued
329.903
Bending Template
For 3.5 mm Proximal Tibia Plates
329.904
Bending Template
For 4.5 mm Proximal Tibia Plates
329.722
Bending Template
For Lateral Tibia Head Buttress Plates
329.721
Bending Template
For LC-DCP Lateral Tibia Head Buttress Plates
329.915
5/11
1-435
Instruments
329.606
Bending Template
For Locking Calcaneal Plate, mini
329.607
Bending Template
For Locking Calcaneal Plates
329.608
Bending Template
For Locking Calcaneal Plate, long
329.609
Bending Template
For Locking Calcaneal Plate, extra long
329.601
Bending Template
For Calcaneal Plates
60 mm
329.602
Bending Template
For Calcaneal Plates
70 mm
329.605
Plates
and Screws
Templates continued
329.602
Bending Template
For Calcaneal Y-Plates
87 mm
5/11
1-436
Plates
and Screws
Instruments
Templates continued
Bending Templates for LC-DCP, DCP and LCP Plates
329.87
329.89
329.820
329.97
329.99
329.92
329.57
Threaded Rod
325.160
328.160
5/11
1-437
Instruments
328.170
Plates
and Screws
511.774
Trial Plates
DHS Trial Plates
338.65
338.66
338.67
338.68
5/11
1-438
Plates
and Screws
Instruments
Wire Cutters
391.97
391.90
391.906
5/11
1-439
Instruments
312.692
312.694
2.8 mm Trocar
For use with Multiple Wire Guide (312.692)
For 7.3 mm Cannulated Screws
312.73
312.01
312.02
2.8 mm Trocar
For use with 8.5 mm/2.8 mm
Wire Sleeve (312.08)
For 7.3 mm Cannulated Screws
312.71
Plates
and Screws
5/11
1-440
Plates
and Screws
Instruments
Wire Guides and Sleeves continued
333.683
324.174
324.175
03.120.019
03.113.022
324.215
5/11
1-441
Instruments
03.311.007
Combination Wrench
321.158
Combination Wrench
8 mm width across flats
321.16
Combination Wrench
11 mm width across flats
321.20
Ratchet Wrench
11 mm width across flats
321.15
Plates
and Screws
Wrenches
5/11
1-442
Plates
and Screws
Instruments
Wrenches continued
321.21
Hexagonal Socket
11 mm width across flats
For use with Ratchet Wrench (321.20)
314.21
Wrench
For Nut for 4.5 mm Cortex Screws (219.96)
338.302
338.06
DHS/DCS Wrench
For DHS/DCS Lag Screws
321.17
X-Ray Calibrator
324.056
X-Ray Calibrator
For use with Distal Femur LISS
5/11
Synthes (USA)
1302 Wrights Lane East
West Chester, PA 19380
Telephone: (610) 719-5000
To order: (800) 523-0322
Fax: (610) 251-9056
2011 Synthes, Inc. or its affiliates. All rights reserved.
www.synthes.com
Printed in U.S.A.
5/11
J4200-C