Documente Academic
Documente Profesional
Documente Cultură
Protection
Founded in 1903 as the Electric Railway Improvement Company, ERICO developed the CADWELD
exothermic welding process in 1938. CADWELD connections have found industry-wide acceptance as the ultimate
grounding and bonding connection. During the 1970s, ERICO pioneered the copper-bonded steel ground rod electrode.
Today, ERICOs range of facility electrical protection products includes ERITECH ground rods, clamps, grounding and
bonding assemblies, ground enhancement material, ground testers, structural lightning protection, equipotential mesh
and mats, and signal reference grids; low-voltage TVSS devices; and CADWELD exothermic connections.
Facility Electrical Protection
Lightning protection, grounding, equipotential
bonding and surge protection are all
interdependent disciplines and the focus of our
Facility Electrical Protection product line.
Reliable protection of personnel and structures
demands a systematic and comprehensive
approach to minimising threats caused by
transients and other
system disturbances. For
instance, no air terminal
can safely capture and
arrest the lightning energy
without a dependable route
to ground. Equally, even the
most expensive Surge
Protection Device (SPD) will
not provide optimum protection if a low-impedance
electrical connection to the
ground is not present.
Additionally, a lowimpedance ground system
may create hazards to
equipment and personnel
alike if equipotential
bonding is not in place.
These interdependent
disciplines are best applied
when looking at a total facility rather than an
individual piece of equipment or a portion of the
facility.
Since no single technology can eliminate the
harmful effects of lightning or induced-surge
transients, ERICO has developed the Six Point Plan
of Protection. The concept behind this plan is a
holistic and coordinated approach that embraces
all aspects of effective facility electrical protection.
www.erico.com
Table of Contents
Technical Information ..................................................................................Pages 4-16
Lightning Protection ..................................................................................Pages 17-29
Conductors ........................................................................................................Pages 30-32
Grounding and Bonding ..........................................................................Pages 33-43
Surge Protection ............................................................................................Pages 44-46
CADWELD/CADWELD PLUS/CADWELD MULTI ..................Pages 47-57
Index ......................................................................................................................Pages 58-59
www.erico.com
CATALOGUE OVERVIEW
LIGHTNING PROTECTION
lightning strike
PAGES 17 TO 19
PAGES 21 TO 22
PAGES 23 TO 26
points together
PAGES 28 TO 30
PAGES 31 TO 37
2
PAGES 38 TO 41
www.erico.com
CADWELD PLUS
PAGES 46 TO 48
CADWELD
SURGE PROTECTION
Point 5 - Protect incoming AC
power feeders
PAGES 43 TO 44
www.erico.com
PAGES 43 TO 44
3
PAGES 50 TO 56
CADWELD MULTI
PAGE 49
TECHNICAL INFORMATION
LIGHTNING PROTECTION
CONDUCTORS
SURGE PROTECTION
CADWELD
CATALOGUE OVERVIEW
TECHNICAL INFORMATION
TECHNICAL INFORMATION
ERITECH SYSTEM 3000
PROTECTION OF STRUCTURES
AGAINST LIGHTNING
There are 2 types of devices for the protection of structures against
lightning: the conventional one, based only on passive components
(copper, galvanized steel...), and the active protection system, The
latter being based on advanced knowledge and more than 15
years of experience.
AIR TERMINAL
THE ERITECH DYNASPHERE
ENHANCED AIR TERMINAL
The patented ERITECH DYNASPHERE is an enhanced air terminal.
Non radioactive
Not externally powered
Has no moving parts
Responds dynamically to the approach of a lightning downleader.
ACTIVE PROTECTION
WHAT IS THE SYSTEM?
The ERITECH SYSTEM 3000 is a technically advanced lightningprotection system. The unique features of this system allow the
achievement of superior technical performance and hence provide
more reliable lightning capture.
The ERITECH DYNASPHERE air terminal provides a preferred point for
lightning discharges which would otherwise strike and damage an
unprotected structure and/or its contents. The ERITECH DYNASPHERE
is connected to an ERITECH ERICORE downconductor and the ground
system in such a way as to provide a totally integrated system.
PROTECTION LEVEL
Lightning is a statistical phenomena where 100% protection is virtually
impossible to achieve, and certainly, is not economically practical. IEC
62305-3 defines 4 protection levels together with associated interception
efficiencies. This information is used to determine the appropriate air
terminal location and spacing.
LEVEL I
LEVEL II
LEVEL III
LEVEL IV
99%
97%
91%
84%
For more than 200 years little improvement was made in lightning
protection systems.
Modern research and recording methods have led to a better
understanding of the lightning discharge process and various
breakthroughs have been achieved in the simulation of lightning
electric-field conditions.
Two fundamental concepts have emerged from recent research into
the lightning attachment process and air terminal performance:
1. Air terminals that produce copious quantities of corona (space charge)
are likely to be less efficient in the interception of a lightning
downward leader.
2. An optimum air terminal is one which launches an upward
streamer when it is highly likely to convert into a stable,
propagating leader (to intercept the downward leader)
The ERITECH DYNASPHERE has been developed with these two
concepts in mind.
The ERITECH DYNASPHERE is an enhanced Franklin rod with a
spherical dome which is capacitively coupled to the electric field of an
approaching lightning downleader.
This spherical conductive surface surrounds a central earthed lightning
rod. The sphere is insulated from the rod but connected to ground via
a high impedance with DC conduction.
The ERITECH DYNASPHERE is isolated from the structure using an
insulated support mast. The mast also enables the safe connection
of the ERITECH ERICORE downconductor to the air terminal.
www.erico.com
COPPER TAPE
SEMI-CONDUCTIVE STRESS CONTROL LAYER
POLYETHYLENE H.V. INSULATION
SEMI-CONDUCTIVE STRESS CONTROL LAYER
www.erico.com
Faraday cage
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
For the efficient performance of a lightning protection system, it is
essential that a low impedance ground be provided to facilitate the
dissipation of the lightning energy into the earth mass.
Because soil conditions and seasonal patterns vary from site to
site, the methods of grounding need to be considered on an
individual basis.
GROUND RODS,
TAPES AND CLAMPS
ERITECH copper-bonded, galvanised and stainless steel earth rods
facilitate the transfer of surges and fault currents into the earth, and
provide a long service life due to superior construction and quality.
GROUND ENHANCEMENT
MATERIAL (GEM)
Ground enhancing materials can be applied around the conductors
in a grounding system to reduce the local soil resistivity and lower
ground impedance. They are particularly useful in areas of moisture
variation, sandy soils and rocky ground.
GROUND POTENTIAL
EQUALISATION
Polymeric
Cover
CADWELD PLUS
Package
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
Weld Cavity
CADWELD/CADWELD PLUS
MOLECULAR BONDING
CRUCIBLE
STARTING
POWDER
WELDING
MATERIAL
DISC
SEAT
TAP
HOLE
WELD
CAVITY
CONDUCTOR
CONDUCTOR
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
GROUND ELECTRODES
The ground electrode is a critical component of the grounding
system. Many different types of electrodes are available, some
"natural" and some "made. The natural types include metal
underground water pipe, the metal frame of a building (if effectively
grounded), a copper wire or reinforcing bar in a concrete foundation
or underground structures or systems. Consideration should be
given to bonding of natural earths to ensure electrical continuity
with a facilities other "earths".
"Made" electrodes are specifically installed to improve the system
grounding or earthing. These earth electrodes must ideally penetrate
into the moisture level below the ground level to reduce resistance.
They must also consist of metal conductors (or a combination of
metal conductor types), which do not corrode excessively for the
period of time they are expected to serve. Made electrodes include
rods or pipes driven into the earth, metallic plates buried in the earth
or a copper wire ring encircling the structure. Underground gas
piping or aluminium electrodes are NOT permitted for use as ground
electrodes.
GROUND RODS
COPPER-BONDED
GROUND ROD
Cost effective
long service life
Copper-bonded
coating:
Permanent
molecular bond
Low resistance
performance
www.erico.com
GALVANISED
GROUND ROD
Lower purchase
price - not as cost
effective as
Copper-bonded
Galvanised coating:
Relatively short
service life
May crack if rod
is bent
Steel core and tip:
High tensile
strength
Deep driving
capability
GROUND ELECTRODES
The copper-bonded ground rod has an
electrolytic coating of copper deposited
over a layer of nickel. This process
ensures a long lasting, molecular bond
between the copper layer and the steel
core. ERICO recommends copperbonded ground rods because the
copper coating will not slip or tear
when driven nor will it crack if the rod
is bent. The tough, carbon steel core
has good characteristics for deep
driving. Copper-bonded ground rods
have a high resistance to corrosion and
provide a low resistance path to
ground.
Ga
lva Zin
nis c
ed
Ste C
el opp
(10 er
mi -bo
l/2 nd
54 ed
m
Ste C
)
el opp
(13 er
mi -bo
l/3 nd
30 ed
m
)
Ga
lva Zin
nis c
ed
Ste C
el opp
(10 er
mi -bo
l/2 nd
54 ed
m
Ste C
)
el opp
(13 er
mi -bo
l/3 nd
30 ed
m
)
Sta
inl
e
Ste ss
el
Sta
inl
e
Ste ss
el
COMPARATIVE COST
YEARS
TECHNICAL INFORMATION
TECHNICAL INFORMATION
www.erico.com
Fig.1-A
The transient nature of lightning with its associated fast rise times
and large magnitude currents mean that special consideration needs
to be given to grounding, for lightning protection to be effective.
Many factors such as soil resistivity variations, installation accessibility, layout and existing physical features are all site specific and tend
to affect decisions on grounding methods employed. The primary
aim of a direct strike grounding system is to:
Distance
from the
electrode
Earth Rod
GROUNDING PRINCIPLES
Low impedance is the key to lightning protection. All grounding
connections should be as short and direct as possible to minimise
inductance and reduce peak voltages induced in the connections.
The ground electrode system must efficiently couple lightning surges
into the ground by maximising capacitive coupling to the soil.
The resistance of the ground itself to lightning currents must
also be minimised. Only when all these factors are taken into
account will maximum lightning protection be achieved.
GROUND IMPEDANCE
Soil resistivity is an important design consideration. It varies markedly
for different soil types, moisture content and temperatures and gives
rise to variations in ground impedances.
Figure 1-B illustrates current flow from the injection point of a
single ground electrode. As current flows out from the central
injection point, a voltage gradient on the ground surface around the
electrode is produced. This gradient levels off to a plateau at some
distance from the electrode, as seen in Figure 1-A. The impedance
seen by the current is determined by the soil particles in direct
contact with the surface of the rod, and by the general
impedance of the soil.
Fig.1-B
CHARACTERISTICS OF A GOOD
GROUNDING SYSTEM
Good electrical conductivity
Conductors capable of withstanding high fault currents
Long life - at least 40 years
Low ground resistance and impedance
The basis philosophy of any grounding installation should be an
attempt to maximise the surface area of electrodes or conductors
with the surrounding soil. Not only does this help to lower the
earth resistance of the grounding system, but it also greatly
improves the impedance of the grounding system under
lightning surge conditions.
Equipotential bonding
Equipotential bonding helps ensure that hazardous potential
differences do not occur between different incoming conductors
such as metallic water services, power systems, telecommunication systems and the local ground, and also minimises step and
touch potentials.
DOWNCONDUCTOR
EARTH PIT
GEM
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
COMPONENTS OF A GROUNDING
SYSTEM
WITHOUT
PROTECTION
WITHOUT
PROTECTION
Ground rods
Ground enhancing materials
CADWELD exothermic welded connections
Ground connectors tapes, stranded cables, rod clamps,
mesh, plates etc
Ground pits - for access to the ground system
Figure 2
European
American
Australian
DIFFERENCE OF
POTENTIAL
Step and Touch Potential. Step potential is the voltage difference between a
persons feet caused by the dissipation gradient of a fault entering the earth.
Touch potential is similar to step potential except that the fault current
passes through the persons arm and torso on the way to the ground.
The use of reinforced concrete slabs and footings is one of the most
effective ways to provide a low impedance ground electrode system.
If addressed at the design stage this method can provide a very
stable, permanent distributed ground electrode system at very little
additional cost to the civil works.
10
www.erico.com
TECHNICAL INFORMATION
TECHNICAL INFORMATION
GROUND POTENTIAL EQUALISATION
Creating an equipotential earth plane under transient conditions is
essential for equipment and personnel safety. However, separate
earths are sometimes installed for lightning, mains power, computer
and communications equipment in buildings and other installations.
Although this may be desirable under normal operating conditions,
when lightning or other transient voltages occur, potential differences
between the separate earths are inevitable. These can enter buildings,
destroying equipment and creating dangers for personnel.
The PEC (Potential Equalization
Clamp) usually operates as
an effective open circuit.
However, once the earth
potential difference exceeds
the breakdown voltage of
the PEC (under transient
conditions), the circuit closes
immediately and the earth
potentials are equalised, thereby
protecting equipment and people.
TELECOM
EARTH
BAR
POWER
EARTH
BAR
MAINS
POWER
EARTH
WIRE
MAINS EARTH
Trench
Width
2, 5 cm
(1)
5, 1 cm
(2)
7, 6 cm
(3)
10, 2 cm
(4)
10 cm
(4)
4.3 m (14.0)
2.1 m (7.0)
1.4 m (4.7)
1.1 m (3.5)
15 cm
(6)
2.8 m (9.3)
1.4 m (4.7)
0.9 m (3.1)
0.7 m (2.3)
20 cm
(8)
2.1 m (7.0)
1.1 m (3.5)
0.7 m (2.3)
0.5 m (1.8)
25 cm (10)
1.7 m (5.6)
0.9 m (2.8)
0.6 m (1.9)
0.4 m (1.4)
30 cm (12)
1.4 m (4.7)
0.7 m (2.3)
0.5 m (1.6)
0.4 m (1.2)
LP EARTH
www.erico.com
LIGHTNING
DOWNCONDUCTOR
EARTH
PIT
TELECOM EARTH
Dia. of
hole
7.5 cm
10.0 cm
12.5 cm
15.0 cm
17.5 cm
20.0 cm
22.5 cm
25.0 cm
11
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
2
3
4
5
7
9
12
14
2
3
4
6
8
11
13
16
2
3
5
7
9
12
15
18
4
6
9
13
17
22
28
34
4
7
10
14
19
25
31
38
4
7
10
15
20
26
32
40
TECHNICAL INFORMATION
TECHNICAL INFORMATION
PROTECTION FROM POWER SURGES
To meet the fundamental requirements of performance, longer service life and greater safety under real world conditions, ERICO
has developed a range of technologies covering all aspects of the Six Point Plan of Protection. In the field of surge protection,
several technologies play a critical role in the provision of premium performance.
The DINLINE Product range offers both shunt or series protection utilising differing technologies in compact DIN rail mounted
products. A number of different options are available to suit your individual application or performance requirements.
PROTECTION OF COMMUNICATIONS
EQUIPMENT
Transients and surges caused by lightning, or switching of
power equipment, affect communications signals carried on
copper cables. Telecommunications lines, industrial process control, coaxial feeders and computer networks are all
vulnerable to surges, which may be up to 20kA for some
high-risk environments. In the field of communications surge
protection, several product variations are required to ensure
all applications are met. Therefore ERICO offers protection products to meet a wide variety of applications, from
telecommunication line protectors for either KRONE or DIN
connection to coaxial surge protectors suitable for either
BNC or N type coax cables.
12
Subscriber Line
Protection (SLP) and
High Speed Digital
Protection (HSP)
Product family
- High 20kA (8/20us)
surge rating
- KRONE LSA-Plus
Termination
- Both Single Stage
and Multi-Stage
models available
Co-axial Surge
Protectors (CSP)
- Robust, plug-in style
design
- Range of connections
types and operating
voltages available
- Wide operating
frequency from DC
up to 3GHz
Universal Transient
Barrier (UTB)
- High 20kA (8/20us)
surge rating
- Premium three
stage protection
- Self-resetting,
over-voltage and
over-current protection
www.erico.com
TRADITIONAL TECHNOLOGIES
Conventional SPD technologies utilize metal oxide varistors
and/or silicon avalanche diodes to clamp or limit transient
events. However, these devices are susceptible to sustained
50/60Hz mains over-voltage conditions which often occur
during faults to the utility system. Such occurrences present
a significant safety hazard when the suppression device
attempts to clamp the peak of each half cycle on the mains
over-voltage. This condition can cause the device to rapidly
accumulate heat and in turn fail with the possibility of
inducing a fire hazard.
Active TD Technology
TD
Quick
Switch
2. Substantial
Over-voltage
3. Pro
te
led. ction h
expo Equipm as faie
quen sed to s nt
t
is da transie ubsemag
ed nt&
Clamping threshold
2. O
vershold voltage
tecti exceed threclam on attemed, proto lo p, overh pts to
fails ng expo eats du
e
sure
and
1. Tra
n
shoo sient ov
e
ped ts & is c r600 to appro lamV
x.
1. Transient
Impluse
www.erico.com
13
3. Pro
te
work ction sti
clam ing and ll
ps tr
ansie
nt
2. P
rote
not ction d
a
clam ttempt oes
volta p supply to
ge
1. D
circu iscrimina
tran it detec ting
s
Quic ient an ts
d
operak Switch
ping ting cla
m
tran
sien t
TD Technology Solution
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
TECHNICAL INFORMATION
CADWELD /CADWELD PLUS
THE MOLECULAR BOND
Polymeric
Cover
CADWELD PLUS
Package
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
Weld Cavity
Installation Is Easy!
4 Simple Steps For Permanently Welded
Electrical Connections
14
TECHNICAL INFORMATION
TECHNICAL INFORMATION
THE CADWELD WELD
Will carry more current than the conductor.
Will not deteriorate with age.
Is a molecular bond that eliminates any risk
of loosening or corrosion.
Will resist repeated fault currents
Can be quality controlled simply by visual
inspection.
RELIABILITY
As the molecular bond eliminates the concept
of surface contact, an electrolyte cannot penetrate
between the conductors and cause oxidation and
deterioration in the course of time.
CORROSIVE ENVIRONMENTS
CONDUCTIVITY
The CADWELD connections form a solid bond
around the conductors assuring continuity. The
cross sectional area of the weld has greater
current carrying capacity than the conductors.
SET CABLE/CABLE
2 SAMPLES
MECHANICAL
2 SAMPLES
SET
CABLE/CABLE
4 SAMPLES
PERFORMANCE
Standard CADWELD welds have a cross
section greater than that of the conductors to be joined, which compensates for
the difference in resistivity between the
conductor and the weld material.
Consequently, under fault conditions the
weld will always remain cooler than the
conductor.
If special applications do not allow for the
required increase in cross section to be
employed, the use of the formula:
R = p x l and V= R x l
S
will make it possible to define precisely
the resistance of the CADWELD weld.
www.erico.com
CADWELD WELD
(Metal A)
(Metal B)
15
MECHANICAL
CRIMPED CONNECTION
Line of current
TIME IN YEARS
CORROSION TEST
RELATIVE RESISTANCE
TECHNICAL INFORMATION
TECHNICAL INFORMATION
Nominal Wire Size
ERICO CADWELD Number
Nominal
Nominal Nominal Nominal
Cross
Mould Reference of Strands Diameter of
Cable
Cable
Strand
AWG
Sectional
Strands
Diameter Diameter Area
Area (mm2)
(mm)
(mm)
(inch)
(mm2)
#10
1B
7
0.98
2.95
0.12
0.75
6
A7
7
1.04
3.12
0.12
0.85
#8
1E
7
1.23
3.71
0.15
1.19
10
W2
7
1.35
4.05
0.16
1.43
#6
1H
7
1.55
4.67
0.18
1.89
16
W3
7
1.70
5.10
0.20
2.27
#4
1L
7
1.96
5.89
0.23
3.02
25
Y1
7
2.14
6.42
0.25
3.60
#3
1Q
7
2.20
6.60
0.26
3.80
25
Y1
19
1.35
6.75
0.27
1.43
#2
1V
7
2.47
7.42
0.29
4.79
#2 Solid
1T
1
6.54
6.54
0.26
33.62
35
Y2
19
1.53
7.65
0.30
1.84
#1
1Y
19
1.50
8.43
0.33
1.77
#1 Solid
1X
1
7.35
7.35
0.29
42.41
50
Y3
19
1.78
8.90
0.35
2.49
1/0 Solid
2B
1
8.25
8.25
0.32
53.49
1/0
2C
19
1.89
9.46
0.07
2.81
2/0 Solid
2F
1
9.27
9.27
0.36
67.43
2/0
2G
19
2.13
10.65
0.42
3.56
70
Y4
19
2.14
10.70
0.42
3.60
95
Y5
37
1.78
12.46
0.49
2.49
95
Y5
19
2.52
12.60
0.50
4.99
3/0
2L
19
2.59
12.95
0.47
5.27
4/0 Solid
2P
1
11.68
11.68
0.46
107.22
4/0
2Q
19
2.89
13.41
0.53
6.56
120
Y6
37
2.03
14.21
0.56
3.24
250 KCM
2V
37
2.07
14.61
0.58
3.37
150
Y7
37
2.25
15.75
0.62
3.98
300 KCM
3A
37
2.29
16.00
0.63
4.12
350 KCM
3D
37
2.47
17.30
0.68
4.79
185
Y8
37
2.52
17.64
0.69
4.99
400 KCM
3H
37
2.64
18.49
0.73
5.47
240
Y9
61
2.25
20.25
0.80
3.98
500 KCM
3Q
61
2.30
20.65
0.81
4.15
300
Y0
61
2.52
22.68
0.89
4.99
Nominal
Wire Cross
Sectional
Area (mm2)
5.26
5.95
8.32
10.02
13.21
15.89
21.12
25.18
26.61
27.20
33.54
33.62
34.93
33.58
42.41
47.28
53.49
53.43
67.43
67.70
68.34
92.07
94.76
100.10
107.22
124.63
119.75
124.52
147.11
152.39
177.29
184.54
202.53
242.54
253.44
304.24
KCM was previously MCM, ie 1000 circular mils, a measure of the wire cross-sectional area.
Note that KCM "overstates" the true cross sectional area (measured in sq. mils) of a conductor by 4/ (i.e. 1.273)
1 mil = 0.001 inch
Square Inches x 1273 = KCM
Square Millimeters x 1.974 = KCM
KCM x 0.5607 = Square Millimeters
16
www.erico.com
LIGHTNING PROTECTION
ERITECH SYSTEM 1000
Metallic Mast
Support Mast
ERITECH ERICORE
Insulated Downconductor
Bare Downconductor
2 Required
www.erico.com
17
LIGHTNING PROTECTION
ESE Terminal
LIGHTNING PROTECTION
ERITECH SYSTEM 3000
INLINE COUPLING
702085
702089
70 mm
Reference code
Part No.
Description
D/SMKIV-SS
INTMKIV-SS
702085
702089
ERITECH DYNASPHERE
ERITECH INTERCEPTOR
1
1
Reference code
Part No.
I/LCOUPL
701320
Unit
weight kg
10,5
ALUMINIUM MASTS
Unit
weight kg
5
2
60 mm
68 mm
Part No.
Unit
weight kg
Length (mm)
Aluminium
ALUM 3ME
ALUM 4M
ALUM 5M
ALUM 6M
Reference code
Part No.
Section
ERICORE/PER M
701875
50 mm2
Reference code
Part No.
Unit
weight
kg
1,5
ERICORE/TRM/IS 701895
1,5
Lower Termination
1,5
1
1
1
1
8,25
11
13
16
225
mm
m
5m
22
Terminations
ERICORE/TRM/OS 701915
3000
4000
5000
6000
Unit
weight kg
1,2 per meter
Description
502000
701370
701380
701390
Reference code
Part No.
Length (mm)
502040
701340
701350
701360
3000
4000
5000
6000
Unit
weight kg
Aluminium
MBMAST3ME
MBMAST4M
MBMAST5M
MBMAST6M
INSULATED MASTS
1
1
1
1
9,6
12
15
17
MAST BRACKETS
61,9 mm
69,9 mm
702065
10 mm
701460
r=38
87
mm
Reference code
Part No.
Colour
Length (mm)
213 mm
Fiberglass reinforced
FRP/2M/BLACK
FRP/4.6M/BLACK
702030
702045
90 mm
31 mm
Unit
weight kg
195 mm
Black
Black
2000
4600
1
1
5
11,5
18
Reference code
Part No.
Description
7000250S4
702065
Unit
weight kg
1,12
UBOLT
701460
Pair of UBOLTs
1 pair
0,4
www.erico.com
LIGHTNING PROTECTION
ERITECH DYNASPHERE/ERITECH
INTERCEPTOR SI ADAPTORS
702297
702298
701840
702299
701990
701410
701420
702296
702301
702306
Reference code
Part No.
CONSAD/E2
CONSAD/FX
CABTIE-SS
701990
701410
701420
Unit
weight kg
0,19
0,01
0,05
5
100
1
Reference code
Part No.
ER1-ARCC-SS
101925
THERMLUGCOUPL 701840
Unit
weight
kg
Description
Adaptor to fix ARC to ER1-xxx-SS*
For bare downconductor
1
1
0,1
0,1
INTCPT-ADBUTT
702296
0,05
INTCPT-ADF2BSPF
702297
0,1
INTCPT-ADF2NSP
702298
0,1
INTCPT-ADM3/4UNC 702299
0,1
INTCPT-ADM116UN 702301
SI terminal to ER2-xxxx-SS*
0,1
0,1
INTCPT-ADM16
702306
Reference code
Part No.
LEC-IV
702050
Unit
weight kg
2
Reference code
Part No.
Description
SI25
SI40
SI60
701535
701536
701537
ESE, 25s
ESE, 40s
ESE, 60s
1
1
1
Unit
weight kg
3
3
3
GUY RING
ERITECH INTERCEPTOR SI
ER1
Reference code
Part No.
in
701280
60
mm
ER3
Unit
weight kg
out
ER2
Aluminium
GUYRING
91
OR
0,11
GUY KIT
ER3-BASE
ER2-BASE
Reference code
Part No.
Unit
weight kg
Description
Stainless Steel
Reference code
GUYKIT 4MGRIP
GUYKIT 7MGRIP
Part No.
701305
701315
www.erico.com
Description
4m vertical guy
7m vertical guy
1
1
ER1-1000-SS
ER1-2000-SS
ER2-2000-SS
ER2-3000-SS
ER2-BASE
ER3-2000-SS
ER3-3000-SS
ER3-BASE
Unit
weight kg
0,400
0,700
19
702255
702260
702265
702270
702290
702275
702280
702295
Upper Section, 1m
Upper Section, 2m
Mid Section, 2m
Mid Section, 3m
Base for ER2 mast
Lower Section, 2m
Lower Section, 3m
Base for ER3 mast
1
1
1
1
1
1
1
1
3,5
6,2
4,9
7,3
5,2
5,3
7,9
5,6
LIGHTNING PROTECTION
101925
LIGHTNING PROTECTION
Light weight
50 mm2 conductor
Semi-conductive
exterior
High voltage
insulation
Air terminal
Isolated mast
cap
Upper termination
with voltage
stress control
Isolated downconductor
Fiberglass
reinforced mast
ISOMMB50 &
FIXOBAND
Stainless steel
mounting
arrangement
20
www.erico.com
CABLE TIE
CABTIE-SS (#701420)
Stainless Steel Cable Tie 0.05 kg
MULTIPURPOSE CLAMP
CCS-308 (#545170) Stainless
Steel Clamp
0.15 kg
0.1 kg
ISOLATED MAST
ISOFRP3M (#702087) 4.2 kg
MAST BRACKET
ALOF-1-GS (#702175) 1.5 kg
Galvanised mast bracket
providing 190 mm offset.
DUAL DOWNCONDUCTOR
ADAPTOR
ISODUAL (#702094) 0.2 kg
For connecting second
parallel ISODC for increased
safety distance.
ISOLATED DOWNCONDUCTOR
ISODC
0.58 kg/m
Supplied with factory upper
termination fitted and materials for customer lower
termination. Order required
length in meters.
www.erico.com
42014 (#591290)
Fixoband Tool
1.8 kg
FEI20 (#591230)
Stainless Steel
Strap 20 mm 0.1 kg
CEI20 (#591080)
Stainless Steel
Buckle 0.01 kg
21
LIGHTNING PROTECTION
LIGHTNING PROTECTION
LIGHTNING PROTECTION
22
LIGHTNING PROTECTION
AIR TERMINAL TO TAPE COUPLING/BRACKETS
L 25mm
70 mm
16.5mm
M16
Reference code
Part No.
Copper
CAR0510
CAR0515
CAR1010
CAR1015
CAR2015
Aluminium
AAR0510
AAR1010
AAR0515
AAR1015
711080
711090
711100
711110
711010
10
16
10
16
16
500
500
1000
1000
2000
1
1
1
1
1
0,480
0,750
1,100
1,510
3,000
711050
711060
710020
711070
10
10
16
16
500
1000
500
1000
1
1
1
1
0,190
0,380
0,265
0,530
27mm
TTR Series
Unit
weight kg
mm L mm
Reference code
Part No.
Unit
weight kg
Material
TTRC16
711210
TTRA16
711200
Rod brackets
CBR015
711190
ABR015
711180
Copper
Aluminium
1
1
0,230
0,080
Copper
Aluminium
2
2
0,900
0,280
Air Terminal
height (m)
2,40
4,15
5,90
7,65
L 2m
Lightning
Rod height
Chrome - nickel plated copper
ASL-240-CC
101700
2,40 m
Reference code
Reference code
Part No.
CMPR
711120
mm L mm
16
500
Unit
weight kg
1,200
Part No.
Reference code
Part No.
Unit
weight kg
mm
30
Number
of mast
0
1 (ER1)
2 (ER1+ER2)
3 (ER1+ER2+ER3)
3,750
Unit
weight kg
mm
ER1-2000
ER2-2000
ER3-2000
101920
101930
101940
33
36
42
1
1
1
13,800
14,200
15,000
B
800 mm
RSC
ATBC/ATBA
Reference code
Part No.
Unit
weight kg
A mm B mm
385 mm
Copper
ATBC10
ATBC15
RSC115
Aluminium
ATBA10
ATBA15
www.erico.com
711150
711160
711170
10
16
16
25
25
31
1
1
1
0,500
0,500
1,700
711130
711140
10
16
25
25
1
1
0,160
0,160
Reference code
Part No.
Nr
of masts
101950
0-3
Unit
weight kg
Galvanized steel
TFS 800
23
8,280
LIGHTNING PROTECTION
AIR TERMINALS
LIGHTNING PROTECTION
X-SHAPED BRACKET
LIGHTNING PROTECTION
6-50mm
Reference code
Part No.
WPC
SG-AERIAL-302
702230
702285
1
1
Unit
weight kg
0,070
0,500
1 pair
Unit
weight kg
10,5
Reference code
Part No.
Description
ACF-2-GS
103100
Set of 2
Fasteners
Admissible
mm
30 to 50
Unit
weight kg
2,10
STRIKING RODS
670 mm
38-77 mm
Reference code
Part No.
LSEB 4554
702180
Reference code
Unit
weight kg
0,50m
1m
1
1
0,550
0,800
0.50m
1m
1
1
0,500
0,750
40 mm
102350
90 mm
Lightning
rod height
Part No.
102410
102400
120 mm
28-55mm
Reference code
Unit
weight kg
Part No.
102460
Galvanized steel
ALOF1-GS
702175
102500
702165
1,500
102450
24
Reference code
Part No.
ASB-TCA
ASP-100-TS
ASA-TB
ABFF-6530-TC
ABFR-6530-TC
ASFR-C
TMC-SS
102350
102400
102410
102450
102460
102500
702165
Description
Base rod support and cross-over
Support plate
Angle support plate
For flat conductor (30x2)
For round conductor (8mm)
Cement block support
Tape to Mast Clamp
1
1
1
1
1
10
1
Unit
weight kg
0,250
0,430
0,200
0,070
0,050
1,000
0,200
www.erico.com
LIGHTNING PROTECTION
BARE TAPE CLIPS
102610
Reference code
Part No.
ATR-10-SS
102600
10
Unit
weight kg
0,080
ACB-10-SS
102610
10
0,060
AEM-10-SS
102620
10
0,040
Description
Reference
code
Part No.
l
w
mm mm
Description
Copper
TAPC253 711570 for 25x3 bare copper tape clip
TAPC506 711590 for 50x6 bare copper tape clip
PVC Covered Copper
TAPC254 711580 for 25x3 PVC covered copper
Unit
weight
kg
40
69
15
15
25
25
0,500
0,800
44.5
15
25
0,500
40
15
25
0,100
tape clip
Aluminium
TAPA253 711550
PUDDLE FLANGES
NON METALLIC DC TAPE CLIPS
150 mm
3mm
150 mm
450 mm
5/8
Reference code
Part No.
Material
PFC001
PFA001
710290
710295
Copper
Aluminium
1
1
Unit
weight kg
-
Reference code
Part No.
Unit
weight kg
Colour
PDC506BL
711360
Black
50
0,02
DC TAPE CLIPS
NON METALLIC UNIVERSAL DC CLIP/BASE
Minimum Order Required
Reference code
Part No.
Unit
weight kg
Description
Copper
DCC253
711220
DCC256
711230
DCC316
711660
DCC506
711240
DCC600
711250
DCC605
711260
DCC610
711270
Aluminium
DCA253
711730
DCA600
711760
www.erico.com
50
50
25
25
50
50
25
0,070
0,080
0,090
0,160
0,100
0,130
0,260
50
25
0,030
0,040
25
Reference code
Part No.
Description
Colour
PDCUC
711352
Clear
50
PDCUCABBL
711341
Black
50
0,015
PDCUCABBN
711342
Brown
50
0,015
PDCUCABGY
711343
Grey
50
0,015
PDCUCABST
711344
Stone
50
0,015
PDCUCABWH
711345
White
50
0,015
PDCUCABGN
711346
8 mm bare/insulated
25 mm x 3 mm bare/insulated
30 mm x 2 mm bare
Black adhesive base
with hardware
Brown adhesive base
with hardware
Grey adhesive base
with hardware
Stone adhesive base
with hardware
White adhesive base
with hardware
Green adhesive base
with hardware
Unit
weight kg
0,007
Green
50
0,015
LIGHTNING PROTECTION
102600
LIGHTNING PROTECTION
SQUARE TAPE CLAMP
LIGHTNING PROTECTION
HF
Reference code
Part No.
Unit
weight kg
Colour
HF250BN
711800
HF250GY
711810
For 25x3 PVC covered tape
HFP253BN
711820
HFP253GY
711830
HFP253ST
711840
Brown
Grey
50
50
0,020
0,020
Brown
Grey
Stone
50
50
50
0,020
0,020
0,020
Reference code
STC253
STC256-506
Aluminium
STA253
711410
711510
25x3 mm
25x6 mm to 50x6 mm
5
5
0,200
0,770
711400
25x3 mm
0,090
BI-METALLIC CONNECTORS
Unit
weight kg
Part No.
Description
Copper
Unit
weight kg
Part No.
Copper
GBH C
710300
710305
Aluminium
GBH A
Part No.
Unit
weight kg
Description
Stainless Steel
BIM800
711490
BIM900
711500
Copper / Aluminium
BIM700
711480
Reference code
Part No.
mm
A
mm
W
mm
711380
711390
8
10
28
42
10
15
50
50
0,01
0,01
711370
711040
8
10
28
42
10
15
50
50
0,01
0,01
25x3 mm
5
5
0,200
0,200
25x3 mm
0,190
Unit
weight kg
Copper
PC008C
PC010C
Aluminium
PC008A
PC010A
round max 8 mm
26 mm
Unit
weight kg
Part No.
Description
711440
26x8 mm
0,290
711430
26x8 mm
0,100
Copper
OBC268
Aluminium
OBA268
Reference code
Part No.
Description
711450
26x12 mm
Unit
weight kg
Copper
PCT400
0,60
26
www.erico.com
LIGHTNING PROTECTION
EARTH TESTING CLAMP
PCF-40-GS
2m
10 mm
PCR-27-GS
2m
100 mm
25 mm
AVG3.0
55 mm
3m
Reference code
Part No.
Unit
weight kg
Description
Reference code
Galvanized
Unit
weight kg
Part No.
PCF-40-GS
102800
PCR-21-GS
102850
AVG3.0
711030
0,90
2,90
CCJ-70-CA
102700
0,4
104450
35
17 mm
80
23
Reference code
50 mm
Part No.
Unit
weight kg
Conductor
Reference code
Part No.
SR
545260
50
R2-SRL-25
R2-SFT-25
Unit
weight kg
0,027
104350
104450
6 mm
5-11 mm or 30x2 mm
50
50
0,038
0,052
23
107500
175
35
Reference code
Part No.
Description
107500
Unit
weight kg
Reference code
Galvanized
Part No.
Unit
weight kg
Conductor
SDH-3-GI
50
0,021
R1-SRL-25A6
R1-SFT-25
104200
104300
6 mm
5-11 mm or 30x2 mm
50
50
0,042
0,042
FIXOBAND
MULTIPURPOSE CLAMP
56 mm
Reference code
Part No.
Unit
weight kg
Material
CCFR-308
CCS-308
CCG-308
545270
545170
545180
www.erico.com
Brass
Stainless steel
Galvanized steel
25
25
25
0,150
0,150
0,150
27
Reference code
Part No.
CEI20
FEI20
BEI20
42014
591080
591230
591280
591290
Description
Stainless steel bonding
100
Stainless steel buckle
50
Stainless steel serrated buckle 100
Fixoband Tool
1
Unit
weight kg
0,009
0,104
0,017
1,800
LIGHTNING PROTECTION
21mm 40 mm
LIGHTNING PROTECTION
SLIDE RAIL FOR ROOF TILE OR TILE SLATE
LIGHTNING PROTECTION
105400
r=93
104950
105300
Reference code
104980
Part No.
Unit
weight kg
Conductor
Reference code
105300
105400
6 mm
5-11 mm or 30x2 mm
10
10
Unit
weight kg
Conductor
T1-SRL-25/6
T1-SFT-25
Part No.
R6-SRL-40/6
R6-SFT-40
0,092
0,105
104950
104980
6 mm
5-11 mm or 30x2
50
50
0,069
0,083
104600
107660
52
107650
40
25
Reference code
Part No.
Unit
weight kg
Conductor
Plastic 16 mm height
SRL-23-N6
SRL-23-N8
SRL-23-N10
103700
103710
103720
6 mm
8 mm
10 mm
50
50
50
Reference code
0,008
0,008
0,008
Unit
weight kg
Conductor
Plastic
SFT-23-N
SFTP-23-N
R3SFT-25
Part No.
107650
107660
104600
5-11 mm or 30x2 mm
5-11 mm or 30x2 mm
5-11 mm or 30x2 mm
50
50
50
0,020
0,020
0,037
100
100
Unit
weight kg
0,002
-
106300
110
38mm
18mm
106200
TAPS302
Reference code
Part No.
Conductor
Unit
weight kg
Height
Plastic
SFRR-SRL-45/6
SFRR-SFT-45
SFRR-SFT-65
106200
106300
106310
6 mm
5-11 mm or 30x2
5-11 mm or 30x2
45mm
45mm
65mm
10
10
10
0,014
0,028
0,029
28
ALD-TAP302
Reference code
Part No.
TAPS302
ALD-TAP302
711620
711195
www.erico.com
LIGHTNING PROTECTION
SLIDE FASTENER ROOFSTILE FOR CONDUCTORS
190mm
Reference code
Part No.
SFR-BC-8
SFT-BC
SFT-BE
Conductor
Unit
weight kg
Fill
106030
8 mm
Concrete
106080 5-11 mm or 30x2 Concrete
106060 5-10 mm or 30x2 Empty
20
20
100
0,970
0,982
0,100
Reference code
Part No.
R7-SFT-20
702250
10
Unit
weight kg
0,05
10
Unit
weight kg
0,02
T CONNECTOR
40 mm
45 mm
35 mm
150 mm
Reference code
Part No.
Unit
weight kg
Material
8-10 mm diam.
CTR-10
CTR-8CU
CTR-8AL
101230
710030
710040
Galvanized
Copper
Aluminium
25
10
10
0,12
-
CROSS CONNECTOR
28 mm
28 mm
Reference code
Part No.
Material
101250
101260
101265
Stainless steel
Copper
Galvanized steel
Unit
weight kg
6-8 mm diam.
CCR-68-S
CCR-68-CU
CCR-68-GS
www.erico.com
25
25
25
0,48
0,54
-
29
Reference code
Part No.
HSF
702240
LIGHTNING PROTECTION
80mm
CONDUCTORS
COPPER CABLE
WITHOUT INSULATION
Reference code Part No.
SC-EC-25
SC-EC-35
SC-EC-50
SC-EC-70
SC-EC-95
SC-EC-120
SC-EC-150
SC-EC-185
197900
197910
197920
197930
197940
710900
710920
197950
Strand
Description
7x2,14
7x2,52
19x1,78
19x2,14
19x2,52
37x2,00
37x2,25
37x2,50
Section
mm2
25
35
50
70
95
120
150
185
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
Unit
weight kg
0,23/m
0,31/m
0,46/m
0,62/m
0,85/m
1,03/m
1,33/m
1,61/m
Reference code
Part No.
TC-EC-2530-25
TC-EC-2530-50
TC-EC-2560-15
TC-EC-3020-30
TC-EC-3850-10
TC-EC-3860-30
TC-EC-5060-20
710515
710510
710535
197650
710555
710560
710580
Width
(A)mm
25
25
25
30
38
38
50
Thick.
(B)mm
3,0
3,0
6,0
2,0
5,0
6,0
6,0
25 m
50 m
15 m
30 m
10 m
30 m
20 m
Unit
weight kg
0,67/m
0,67/m
1,34/m
0,53/m
1,70/m
2,04/m
2,64/m
30 m
30 m
75 m
30 m
35 m
Unit
weight kg
0,67/m
0,53/m
0,53/m
1,06/m
1,42/m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
30 m
20 m
Unit
weight kg
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
0,77/m
1,55/m
2,95/m
Dimensions
AmmxBmm
25x3,0
50 m
Unit
weight kg
0,77/m
CONDUCTORS
Section
mm2
198000
198010
198020
204x0,395
286x0,395
408x0,395
25
35
50
50 m
50 m
50 m
0,27/m
0,37/m
0,53/m
198050
198060
198070
198080
198090
710980
710990
711000
7x2,14
7x2,52
19x1,78
19x2,14
19x2,52
37x2,03
37x2,25
37x2,52
25
35
50
70
95
120
150
185
50 m
50 m
50 m
50 m
50 m
50 m
50 m
50 m
0,26/m
0,36/m
0,52/m
0,72/m
0,98/m
1,16/m
1,54/m
2,10/m
Reference code
Part No.
TC-ECT-2530-30
TC-ECT-3020-30
TC-ECT-3020-75
TC-ECT-4030-30
TC-ECT-4040-35
197720
197710
545200
197970
197975
Width
(A)mm
25
30
30
40
40
Thick.
(B)mm
3,0
2,0
2,0
3,0
4,0
Unit
weight kg
IC-EC-25
IC-EC-35
IC-EC-50
IC-ECH-25
IC-ECH-35
IC-ECH-50
IC-ECH-70
IC-ECH-95
IC-ECH-120
IC-ECH-150
IC-ECH-185
CT
Reference code
Part No.
CTBL253-25
CTBN253-25
CTGN253-25
CTGY253-25
CTST253-25
CTWH253-25
CTYGN253-25
CTGN256-30
CTGN506-20
710595
710605
710616
710645
710655
710666
710667
710620
710630
Dimensions
AmmxBmm
Black
25x3,0
Brown
25x3,0
Green
25x3,0
Grey
25x3,0
Stone
25x3,0
White
25x3,0
Yell./Green 25x3,0
Green
25x6,0
Green
50x6,0
Colour
30
Reference code
Part No.
Colour
LSF-253
710615
Green
www.erico.com
CONDUCTORS
WM
PC
Reference code
Part No.
LCT-253
710625
Width
(A)mm
25
Thick.
(B)mm
3,0
50 m
Unit
weight kg
2,56/m
Mesh: 115 x 55 mm
EML
SRGB
Tape = 50 x 0,40 mm
Part No.
HDB2003
HDB2503
HDB2506
HDB3806
HDB5006
HDB5010
710670
710680
710690
710700
710710
550900
Dimensions
mm
20x3x4000
25x3x4000
25x6x4000
38x6x4000
50x6x4000
50x10x4000
1
1
1
1
1
5
Unit
weight kg
2,14
2,68
5,34
8,00
10,68
17,80
Unit
weight kg
10,68
COPPER PLATES
Reference code
Part No.
Dimensions mm
PC1.5-0606
PC3-0606
PC1.5-0909
PC2.-1020
PC3-0909
710190
710200
710210
504550
504590
Unit
weight kg
1
1
1
1
1
5,000
9,600
11,510
35,600
21,630
Part No.
THDB5060
710730
Dimensions
mm
50x6x4000
Dimensions mm
EML663
710230
EML993
710240
WM3-2088-B
504500
WM2-1030-B
504510
WM3-1020-B
504520
WM2-1020-B
504530
Galvanized steel
WMS-1030-B
504540
600 x 600 x 3
900 x 900 x 3
8800 x 2000 x 3
3000 x 1000 x 2
2000 x 1000 x 3
2000 x 1000 x 2
1
1
1
1
1
1
Unit
weight kg
3,980
7,200
54,000
5,000
5,400
4,000
3000 x 1000 x 3
8,700
Reference code
SC
Part No.
RC-EC-6
RC-EC-8
RC-EC-8-3
198150
198160
545210
(D) mm
6
8
8
Cross
Section
28,3
50,3
50,3
100 m
100 m
30 m
Unit
weight kg
0,25/m
0,45/m
0,45/m
Part No.
RC-ET-6
RC-ET-8
198200
198210
(D)mm
6
8
Cross
Section
28,3
50,3
100 m
100 m
Unit
weight kg
Reference code Part No. Length (m) Width (m) Spacing (m)
SRGBC120
SRGBD100
SRGBE100
SRGBF100
SRGBG100
167900
167901
167902
167903
167904
36,57
30,48
30,48
30,48
30,48
2,44
3,04
3,65
4,26
4,87
0,60
0,60
0,60
0,60
0,60
1
1
1
1
1
86,18
90,72
104,33
127,01
145,15
SRGC46BR
SRGC46
Part No.
Colours
SCBL
SCBN
SCGY
SCST
710800
710810
710820
710830
Black
Brown
Grey
Stone
www.erico.com
Cross
Section
50,3
50,3
50,3
50,3
50 m
50 m
50 m
50 m
Reference code
Part No.
Max. Size
SRGC46
SRGC46BR
167905
167906
Up to 25 mm2 stranded
25 mm pedestal
Unit
weight kg
0,49/m
0,49/m
0,49/m
0,49/m
31
50
10
Unit
weight kg
0,10
0,13
CONDUCTORS
Reference code
CONDUCTORS
Reference code
Part No.
FAT-253-50
BAT-2560
BAT-5060
710740
710960
710965
Width
A mm
25
25
50
Thick
B mm
3
6
6
50 m
50 m
50 m
Reference
code
SABL
SABN
SAGY
SAST
Unit
weight kg
0,21/m
0,41/m
0,81/m
CONDUCTORS
Reference
code
ATBL253
ATBN253
ATGY253
ATST253
ATWH253
Part No.
710750
710760
710770
710780
710790
Width Thick
A mm B mm
25
3
25
3
25
3
25
3
25
3
Colours
Black
Brown
Grey
Stone
White
50 m
50 m
50 m
50 m
50 m
D
Part No. Cross-section
mm2 mm Colours
710840
50,3
8
Black
710850
50,3
8
Brown
710860
50,3
8
Grey
710870
50,3
8
Stone
Unit
weight kg
0,18/m
0,18/m
0,18/m
0,18/m
50 m
50 m
50 m
50 m
Unit
weight kg
0,30/m
0,30/m
0,30/m
0,30/m
0,30/m
Reference
code
RSCC-8
RSCC-10
Part No.
197860
197870
Cross-section
mm2
50,3
78,5
D
mm
8
10
Unit
weight kg
100 m 0,400/m
100 m 0,630/m
CC5A04
Reference
code
30TC-HGSP-3035
Part No.
197810
Width Thick
A mm B mm
30
3,5
30 m
CC5A05
CC5A12
Fusing
Outside
Capacity
Diameter Equivalency
CC5A04 CC5A04
(1) Tinned Copper,
8.38 mm
100% of
(6) Galvanized Steel Strands
16 mm2
CC5A05 CC5A05
(3) Tinned Copper,
8.48 mm
100% of
(16) Galvanized Steel Strands
16 mm2
CC5A12 CC5A12
(133) Tinned Copper,
14.53 mm 100% of
(24) Galvanized Steel Strands
70 mm2
Unit
weight kg
0,82/m
76 m
Unit
weight
kg
25,9
76 m
26,3
60 m
61,2
Description
Reference
code
RAW-8
ASCO8
Part No.
198250
711530
Cross-section
mm2
50,3
50,3
D
mm
8
8
300 m
50 m
Unit
weight kg
0,14/m
0,14/m
32
www.erico.com
GROUNDING SOLUTIONS
High strength corrosion resistant ERITECH Ground Rods,
clamps and accessories
Prefabricated wire mesh
Ground Enhancement Material (GEM) greatly improves
ground grid resistance and impedance
CADWELD molecular bonding connections
RADIAL DESIGN
www.erico.com
33
conditions. Copperbonded rods last longer, drive easier and will not crack.
Copper exteriors, molecularly bonded to nickel-sealed high-strength steel
8.3 x 10-4m/m.
Extending rods may be extended with use of threadless couplers.
Manufactured
Type DH
Tempered steel
Driving Heads
This one tool enables driving of rods to ground level, without heavy
sledge-hammers or ladders and without deforming the end of the rod.
Heavy-duty steel construction provides robustness and excellent driving
force, while the soft rubber ergonomic grip provides user comfort.
Couplers
Earthrod
Pigtail
14,2 mm (5/8) and 17,2 mm (3/4) inserts are interchangeable with standard driver
The
34
www.erico.com
Reference
Part No.
code
Non extending
1,2M38
155000
1,5M38
155010
2,1M38
155030
3,0M38
155050
Extending
1,2M12
155060
1,5M12
155070
2,1M12
155090
3,0M12
155110
1,2M58
155240
1,5M58
155250
2,1M58
155270
3,0M58
155290
1,2M34
155420
1,5M34
155430
2,1M34
155450
3,0M34
155470
to standard UL467
Nominal Length
Approx.
inches mm
m feet
Unit
weight kg
3/8
3/8
3/8
3/8
9
9
9
9
1,2
1,5
2,1
3
4
5
7
10
5
5
5
5
0,650
0,800
1,100
1,600
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
12,5
12,5
12,5
12,5
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
1,2
1,5
2,1
3
1,2
1,5
2,1
3
1,2
1,5
2,1
3
4
5
7
10
4
5
7
10
4
5
7
10
5
5
5
5
5
5
5
5
5
5
5
5
0,800
1,150
1,600
2,300
1,500
1,900
2,650
3,750
2,150
2,750
3,800
5,450
Reference
code
S1,2M916
S1,5M916
S2,1M916
S3,0M916
S1,2M58
S1,5M58
S2,1M58
S3,0M58
S1,2M34
S1,5M34
S2,1M34
S3,0M34
Part No.
155180
155190
155210
155230
155300
155310
155330
155350
155480
155490
155510
155530
inches
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
Approx.
mm
12,7
12,7
12,7
12,7
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
Nominal Length
m feet
1,2
4
1,5
5
2,1
7
3
10
1,2
4
1,5
5
2,1
7
3
10
1,2
4
1,5
5
2,1
7
3
10
5
5
5
5
5
5
5
5
5
5
5
5
Unit
weight kg
0,800
1,150
1,600
2,300
1,500
1,900
2,650
3,750
2,150
2,750
3,800
5,450
Reference code
Part No.
Rod
CC12F
CC58
CC34
158000
158010
158020
1/2
5/8
3/4
25
25
25
0,108
0,134
0,202
Rod
158030
158040
158050
9/16
5/8
3/4
Unit
weight kg
Brass
SC916
SC58
SC34
Unit
weight kg
Bronze
Part No.
25
25
25
0,104
0,086
0,172
Part No.
Rod
158090
158100
158110
9/16
5/8
3/4
Unit
weight kg
Tempered steel
Reference code
Part No.
Rod
158120
158130
158140
1/2
5/8
3/4
DS916
DS58
DS34
Unit
weight kg
Tempered steel
DH12
DH58
DH34
5
5
5
0,158
0,435
0,226
25
25
25
0,052
0,074
0,126
Reference code
Part No.
Unit
weight kg
Rod
Tempered steel
DT12
DT58
DT34
www.erico.com
Reference code
Part No.
Rod
SDT58
SDT34
5/8
3/4
Unit
weight kg
Tempered steel
158060
158070
158080
1/2
5/8
3/4
5
5
5
0,110
0,156
0,272
SDT58
SDT34
35
25
25
0,040
0,070
resistance 6 micro-Ohms
BZT-Copper couplers 99% Cu, typical mechanical
Reference code
Part No.
EST3640
EST3640
EST4610
EST4610
EST4630
EST4630
EST6472
EST6472
Technical data available upon request.
1
1
1
1
Unit
weight kg
15,880
15,909
15,880
16,818
Part
Rod
Conductor
No.
Range
EHL12FC1K
1/2"
10-16 mm2 str
EHL12FC1V
1/2"
22-35 mm2 str*
EHL12FC2G
1/2"
50-70 mm2 str**
EHL58C1K
5/8"
10-16 mm2 str
EHL58C1V
5/8"
22-35 mm2 str*
EHL58C2G
5/8"
50-70 mm2 str**
EHL34C1K
3/4"
10-16 mm2 str
EHL34C1V
3/4"
22-35 mm2 str*
EHL34C2G
3/4"
50-70 mm2 str**
Dual-Hole (2 Conductors)
EHL12FC1K1K
1/2
10-16 mm2 str
EHL58C1K1K
5/8
10-16 mm2 str
* 6 mm solid
** 8 mm solid
25
25
25
25
25
25
25
25
25
Unit
weight kg
0,137
0,134
0,134
0,129
0,116
0,209
0,213
0,159
0,169
25
25
0,134
0,209
GEM improves grounding effectiveness regardless of soil conditions. It is the ideal material to
use in areas of poor conductivity
such as rocky ground, mountain
tops and sandy soil.
GEM is also the answer in situations where ground rods can't be driven. Or where limited land area makes adequate grounding difficult
with conventional methods.
Once GEM is installed, it maintains its low resistance for the life of
the project. GEM's performance is backed by rigorous independent
tests and proven field experience.
SCR15-710070 - Copper
SCR20-710080 - Copper
Part No.
SCR15
SCR20
710070
710080
Rod
mm
15
20
L
1,20 m
1,20 m
5
5
Unit
weight kg
1,64
3,34
Part No.
158610
158675
158690
158290
rod
1/2
5/8
5/8
5/8
Cable Cable
size mm2 lengh mm
25
300
25
300
35
300
50
300
5
5
5
5
Unit
weight kg
0,180
0,200
0,200
0,365
Reference code
Part No.
Rod
mm
Unit
weight kg
CDS15
710090
15
0,020
15
0,050
CDS20
710100
M10 Phosphor bronze internal coupling Dowel (PB102) for SCR15 and SCR20
PBD10
710110
10
0,020
15
0,020
20
0,050
SPK15
710120
SPK20
36
710130
www.erico.com
Part No.
710010
diam. length
mm
m
16
1.20
Unit
weight kg
1,640
Rod
mm
Part No.
Unit
weight kg
0,020
0,020
0,020
Unit
weight kg
Length m
158760
158770
158780
1
1,5
2
5
5
5
2,340
3,510
4,680
Part No.
0,200
Reference code
Part No.
15SS20
158540
Length
m
1,5
mm
20
Unit
weight kg
3,700
Section 50 x 50 x 3
Reference code
20
Unit
weight kg
1,0CG50/3
1,5CG50/3
2,0CG50/3
158400
CDS15
710090
15
M10 Stainless steel internal coupling Dowel
SSD10
710115
10
Driving point for SSR16
SPK15
710120
15
Part No.
Rod
mm
Tempered steel
Reference code
Part No.
Part No.
Rod
mm
158550
20
Unit
weight kg
Tempered steel
DT-P11-20-SS
0,040
Unit
weight kg
Length m
Section 50 x 50 x 5
1,0CG50/5
1,5CG50/5
2,0CG50/5
158710
158720
158730
1
1,5
2
5
5
5
3,900
5,850
7,800
Reference code
Rod
mm
158380
20-30
Unit
weight kg
Tempered steel
DH-TR167
Part No.
0,200
Reference code
Part No.
1,5SG20
158810
www.erico.com
Length
m
1,5
mm
20
Unit
weight kg
3,705
37
Unit
weight kg
Part No.
0,400
Reference code
Rod
mm
Part No.
Unit
weight kg
S-136-20
158440
Reference code
20
0,070
Part No.
Clamp capacity
A mm B mm
158410
710345
710350
710360
26x12
31x10
51x12
26x10
Unit
weight kg
Gunmetal
RTC1626
RTC2030
RTC2051
RTC2526
16
20
20
25
10
10
10
10
0,160
0,310
0,230
Type C
Reference code
Part No.
EGRD58
158500
EGRD58L
158510
EGRD34
158520
EGRD34L
158530
Type CP
Unit
weight kg
Description
1,5 m driver body with insert
for up to 14,2 mm
Replacement insert for
14,2 mm (5/8)
Driver body with insert for
up to 17,2
Replacement insert for
17,2 mm (3/4)
10,420
2,720
10,420
2,720
Conductor Capacity
Type C: Max 70 sq mm
Type CP: Max 25 sq mm
Rod
in mm
Unit
weight kg
Gunmetal
C12
C58
C34
C19
C20
C1
Bronze
CP38
CP58
CP34
158260
158160
158170
156900
156910
158250
158155
158165
158175
12,5-12,7
12,5-15,0
14,2-17,2
14,2-19,0
14,2-20,0
5
5
5
5
5
5
0,040
0,084
0,086
0,085
0,125
0,110
0,04
0,10
0,13
Description
Conductor to
Ground Rod Clamp
Conductor Size
Ground Rod
Tape Wire/Cable
Size
up to
from 35 5/8 and 3/4
40 mm to 50 mm2
range
Reference code areaConductor
(mm2)
mm
GUV16070
16-70
5,1-10,7
GUV70185
70-185
10,7-17,6
Reference code
Part No.
Nominal
Rod mm
SP58
158185
Conductor
Sizes
Min. Torque
Withstand
50
Unit
weight kg
UB16
UB20
UB25
GUV16070
GUV70185
710370
710380
710390
710400
710410
16
20
25
10-20
16-20
10
10
10
5
5
0,200
0,200
0,210
0,390
0,440
38
www.erico.com
RCC10
SRC15
SRC20
Reference Part No.
code
Gunmetal
RCC10
710420
RCC16
710430
SRC15
710440
SRC20
Unit
weight kg
Description
9,5 mm plain split Clamp
16 mm split Clamp (threaded)
14,2-15 mm plain split Clamp
(SCR) for solid copper rod
20 mm plain split Clamp
(SCR) for solid copper rod
710450
10
10
0,090
0,340
10
0,330
10
0,300
Designed to
suit Earth Pit
Unit
weight kg
0,300
0,260
0,150
Part No.
GEM
163670
Unit
weight kg
11,500
PREFABRICATED CROWSFOOT
Reference
code
Part No.
WGRS200
158922
Description
Unit
weight kg
4,3
Reference code
Part No.
GF-302
503900
Rod
in mm
Tinned copper
30 x 2
Unit
weight kg
5,500
INSPECTION PITS
103470
710180
107600
107550
Reference code
103450
Part No.
Rod height
mm
Unit
weight kg
Galvanized steel
180 mm
STBF-25-GS
STBF-40-GS
107600
107610
250
400
25
25
0,200
0,340
100 mm
140 mm
Reference code
Reference
code
PIT03
IP-900-C
IP-R193x122MM
IP-SQ-180-CI
Part No.
710180
103450
103470
103480
www.erico.com
Dimensions
mm
plastic 250x200x215
concrete 325x325x145
Cast iron 210x140x120
Cast iron
180
Material
1
1
1
1
Unit
weight kg
1,350
27
7
2,400
Part No.
Unit
weight kg
Material
SSF-6-GS
SSF-6-C
39
107550
107560
Galvanized steel
Copper
25
25
0,130
0,140
Reference code
40
22
Reference code
EQUIPOTENTIAL BARS
Unit
weight kg
Part No.
Copper - 8mm
TECLP-8-CU
710050
10
160 mm
SEB
0,090
Aluminium - 8mm
TECLP-8-AL
710060
10
0,058
40 mm
5 mm
171 mm
Cu 50x5mm
w
B - BOND
173 mm
SEB-GER-08
SEB-62-DL
33
Reference
code
DLUNI
SEB-06
SEB-06-DL
SEB-10
SEB-10-DL
SEB-62-DL
SEB-GER-08
33
25 mm max.
Reference code
Unit
weight kg
Part No.
BBBC
52 mm
DLUNI
M10x35
710260
25
0,12
25
0,60
ABBC
710250
SEB-06-DL
Nr of Disconnect L
Part No. terminals
links
mm
545000
1
125
545010
6
0
400
545020
6
1
475
545030
10
0
600
545040
10
1
675
545130
6
2
550
545001 7 x 25 mm2
100
100
100
100
100
100
94
94
94
94
94
94
1 x tape 30 x 3,5
1 x 8 mm
1
1
1
1
1
1
10
Unit
weight kg
1,192
1,642
2,400
2,312
2,800
3,200
0,314
PIPE COLLARS
L. 200 mm
6-11 mm
Reference code
Part No.
25 mm
Unit
weight kg
min. / max.
10,5 mm
16 connection points
SPC-5080-S
107000
SPC-70120-S
107010
SPC-130180-S
107020
Copper - conductor, 6 to 11 mm
SPC-5080-C
107050
SPC-70120-C
107060
SPC-130180-C
107070
50/80
70/120
130/180
10
10
10
0,147
0,170
0,214
50/80
70/120
130/180
10
10
10
0,165
0,191
0,240
Reference code
Unit
weight kg
Part No.
SEP
545190
1,02
Reference code
Unit
weight kg
Part No.
Copper - conductor, 6 to 10 mm
SGR-610-2
107230
10
0,067
40
www.erico.com
EARTH BOSS
710160
Reference code
Part No.
H x D x W (mm)
IBTB
IBTB
Unit
weight kg
0,136
Reference code
Part No.
500-10-E-BOSS
710160
mm
50
Unit
weight kg
-
198400
198410
198420
5 ft = 1.5 m
10 ft = 3 m
20 ft = 6 m
STATIC EARTHING
EARTH BLOCKS
20 mm
165620
165410
EBL08
- 6 x 5,2 mm
- 2 x 6,5 mm
88 mm
Length
mm
50
13 mm
EBL08
B2610A
Reference code
Unit
weight kg
Part No.
B2617A
165400
Tinned brass
711470
10
0,158
B2618B
10100
80
60
40
M10
Reference code
Part No.
Conductor
Unit
weight kg
Rebar
Galvanized steel
CPD-2440
25
Reference code
Part No.
B2610A
B2617A
A822SA111C-5
A822SA111C-10
A822SA111C-20
B2618B
165410
165620
198400
198410
198420
165400
Description
Spring Clamp
Aircraft Grounding Clamp
Orange Coiled Cable, 5 ft (1.5 m)
Orange Coiled Cable, 10 ft (3 m)
Orange Coiled Cable, 20 ft (6 m)
Cable Reel Assembly
1
1
1
1
1
1
Unit
weight kg
0,144
1,140
0,450
0,540
0,820
3,150
FENCE CLAMPS
0,340
REBAR CLAMPS
RC
EK
Reference code
Part No.
Conductor
Rebar
8 mm dia
8 mm dia
25 mm2
25 mm2
8-18 mm
18-38 mm
25 mm-parallel
25 mm-perpendicular
Reference code
Part No.
FC073
FC074
FC075
FC076
FC078
FC079
FC080
FC082
198401
198402
198403
198404
198406
198407
198408
198411
16 mm Str - 70 mm Str
70 mm Str - 120 mm Str
16 mm Str - 70 mm Str
70 mm Str - 120 mm Str
16 mm Str - 120 mm Str
16 mm Str - 70 mm Str
70 mm Str - 120 mm Str
16 mm Str - 120 mm Str
Unit
weight kg
Galvanized steel
RC70
RC100
EK16
EK17
710325
710335
710355
710365
www.erico.com
1
1
50
50
0,340
0,780
0,091
0,091
41
EBL08
Reference code
Part No.
OXINHIBCOMP
710220
Unit
weight kg
0,314
Part No.
inch
EBR-58
EBR-34
710140
710150
5/8
3/4
68
68
96
96
Unit
weight kg
-
5
5
Part
No.
GROUNDING RECEPTACLES
165180
ATTACHMENT
BAR
165220
165230
A
B
These receptacles provide earth connections for the frames of planes, ships, tankers trucks, etc.
eliminating their electrostatic charge and obtaining equipotentiality with the surrounding earth.
Parts are copper alloy, connections to the earth circuit can be made with CADWELD.
Reference
code
B165
B166
B167
Part No.
Attachment
165180
165220
165230
Depth
A
4 1/2
6 1/4
7 1/4
2 3/4
4 3/4 3 7/8
6 1/2 4 3/4
1
1
1
Unit
weight kg
0,800
2,100
7,000
Reference code
DT50
SFO50
Part No.
711520
710170
10 m x 50 mm
8 m x 50 mm
1
1
Unit
weight kg
0,760
0,430
Reference code
PEC100
PEC150
Part No.
702900
702901
1
1
563540
556620
563550
556630
563300
556640
556650
563320
556660
556940
556670
556680
563340
556690
563430
556700
556710
556950
556720
556730
556740
556750
556760
556960
556770
556780
556790
556800
565000
556810
556970
556820
556830
563350
556840
563440
563360
563370
556850
556860
563390
563400
556980
563560
Thick. Section L
Reference code Intensity
A
mm mm2 mm
mm
J
mm
T
mm
MBJ 16-100-6
MBJ 16-100-8
MBJ 16-150-6
MBJ 16-150-8
MBJ 16-200-6
MBJ 16-200-8
MBJ 16-250-8
MBJ 16-300-6
MBJ 16-300-8
MBJ 16-500-8
MBJ 25-100-10
MBJ 25-150-10
MBJ 25-200-6
MBJ 25-200-10
MBJ 25-200-12
MBJ 25-250-10
MBJ 25-300-10
MBJ 25-500-10
MBJ 30-100-10
MBJ 30-150-10
MBJ 30-200-10
MBJ 30-250-10
MBJ 30-300-10
MBJ 30-500-10
MBJ 35-100-10
MBJ 35-150-10
MBJ 35-200-10
MBJ 35-250-10
MBJ 35-250-25
MBJ 35-300-10
MBJ 35-500-10
MBJ 50-100-10
MBJ 50-150-10
MBJ 50-200-6
MBJ 50-200-10
MBJ 50-200-12
MBJ 50-200-16
MBJ 50-200-18
MBJ 50-250-10
MBJ 50-300-10
MBJ 50-300-16
MBJ 50-300-18
MBJ 50-500-10
MBJ 50-500-12
6,5
8,5
6,5
8,5
6,5
8,5
8,5
6,5
8,5
8,5
10,5
10,5
6,5
10,5
12,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
25,5
10,5
10,5
10,5
10,5
6,5
10,5
12,5
16,5
18,5
10,5
10,5
16,5
18,5
10,5
12,5
15
15
15
15
15
15
15
15
15
15
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
40
23
23
28
28
28
28
28
28
28
28
28
28
28
28
28
25
25
25
25
25
25
25
25
25
25
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
50
33
33
38
38
38
38
38
38
38
38
38
38
38
38
38
120
120
120
120
120
120
120
120
120
120
150
150
150
150
150
150
150
150
180
180
180
180
180
180
197
197
197
197
197
197
197
250
250
250
250
250
250
250
250
250
250
250
250
250
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
16
16
16
16
16
16
16
16
16
16
25
25
25
25
25
25
25
25
30
30
30
30
30
30
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
150
150
200
200
250
300
300
500
100
150
200
200
200
250
300
500
100
150
200
250
300
500
100
150
200
250
250
300
500
100
150
200
200
200
200
200
250
300
300
300
500
500
Unit
weight kg
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0,018
0,018
0,035
0,035
0,033
0,033
0,040
0,05
0,05
0,082
0,027
0,039
0,052
0,052
0,052
0,064
0,077
0,013
0,032
0,047
0,062
0,075
0,092
0,155
0,037
0,054
0,072
0,089
0,089
0,110
0,180
0,052
0,077
0,12
0,120
0,120
0,11
0,11
0,127
0,153
0,15
0,14
0,255
0,255
Unit
weight kg
0,500
0,544
42
www.erico.com
TYPE DB
FIG. 1: CADWELD mould ref. 197130 can be used to make CADWELD welded
connection of 1 or 2 conductors (cross-section up to 50 mm2 to the plate).
FIG. 2: Steel bar attached at right angles to shank of earth plate by
CADWELD welding.
1
4
TYPE B162
11
10
12
8
Fig. No.
Reference code
Part No.
DB-8A
DB-10A
DB-12A
DB-16A
DB-8K
DB-10K
DB-12K
DB-16K
DB-8KS
DB-10KS
DB-12KS
DB-16KS
DB-10-C5005
DB-10-C501
DB-10-C502
166090
166120
166150
166180
166100
166130
166160
166190
166110
166140
166170
166200
166480
166490
166500
M8
M10
M12
M16
M8
M10
M12
M16
M8
M10
M12
M16
M10
M10
M10
Reference code
Part No.
B161-8A
B161-10B
B164-12A
B161-8K
B161-10KA
B164-12K
B161-8KS
B161-10KM
B164-12KS
B161-10-C5005
B161-10-C501
B161-10-C502
166000
166030
166060
166010
166040
166070
166020
166050
166080
166510
166520
166530
A
4xM8
4xM10
4xM12
4xM8
4xM10
4xM12
4xM8
4xM10
4xM12
4xM10
4xM10
4xM10
Reference code
Part No.
B-162-12A
B-162-12K
B-162-12KS
B-162-12-C5005
B-162-12-C501
B-162-12-C502
166210
166220
162230
166540
166550
166560
2xM12
2xM12
2xM12
2xM12
2xM12
2xM12
www.erico.com
mm
mm
mm
mm
mm
12,7
16
16
16
12,7
16
16
16
12,7
16
16
16
-
12
19
19
19
12
19
19
19
50mm2
50mm2
50mm2
30
50
50
50
30
50
50
50
30
50
50
50
50
50
50
50
55
55
55
50
55
55
55
50
55
55
55
55
55
55
500
500
500
500
500
500
500
500
500
1000
2000
mm
mm
mm
mm
mm
mm
14
14
10,7
14
14
10,7
14
14
10,7
-
12
12
12
12
12
12
50mm2
50mm2
50mm2
65
65
85
65
65
85
65
65
85
65
65
65
42
42
75
42
42
75
42
42
75
-
30
30
44,5
30
30
44,5
30
30
44,5
30
30
30
500
500
400
500
500
400
500
1000
2000
mm
mm
mm
mm
mm
mm
mm
10,7
10,7
10,7
-
12
12
50mm2
50mm2
50mm2
45
45
45
45
45
45
85
85
85
85
85
85
75
75
75
75
75
75
44,5
44,5
44,5
44,5
44,5
44,5
400
400
500
1000
2000
43
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
0,090
0,300
0,305
0,400
0,450
1,520
1,535
1,560
0,440
1,520
1,505
1,540
0,740
0,960
1,440
1
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
0,435
0,455
0,770
1,980
1,040
1,080
1,980
0,850
1,100
0,840
1,100
1,600
5
1
1
1
1
1
Unit
weight kg
0,400
0,700
0,700
0,820
1,060
1,560
SURGE PROTECTION
SURGE PROTECTION
COLOUR CODE
Power Protection device
Telecommunication and Dataline
Protection device.
Power line
Telecoms and Data
Earthing network
44
www.erico.com
SURGE PROTECTION
DINLINE SPARK GAP DIVERTER (SGD)
Part No.
Description
702420
150kA, 275V
Unit
weight kg
0,33
Reference
code
DSD160 1SR 275
DSD160 1SR 275M
DSD140 1S 75
DSD140 1S 275
DSD140 1SR 275
DSD140 M 275
DSD140 1SR 440
DSD140 M 440
DSD110 1S 275
DSD110 M 275
Part No.
Description
702460
702465
702478
702491
702521
702496
702530
702506
702560
702566
Part No.
702581
702591
702601
www.erico.com
Description
40kA, 275V TN-C, Modular
40kA, 275V TN-S, Modular
40kA, 275V TT, Modular
Reference
code
TDF3A120V
TDF3A240V
TDF10A120V
TDF10A240V
TDF20A120V
TDF20A240V
Unit
weight kg
0,12
0,10
0,12
0,12
0,12
0,10
0,12
0,10
0,12
0,10
1
1
1
1
1
1
1
1
1
1
1
1
1
Part No.
Description
702400
702426
100kA 10/350
25kA 10/350
Unit
weight kg
0,3
0,12
1
1
Reference
code
DSD340 TNC 275 A
DSD340 TNS 275 A
DSD340 TT 275 A
Reference
code
SGD1100 2S NE
SGD125 1SR NE
Part No.
Description
700001
700002
700003
700004
700005
700006
3A, 120V
3A, 240V
10A, 120V
10A, 240V
20A, 120V
20A, 240V
1
1
1
1
1
1
Unit
weight kg
0,35
0,35
0,75
0,75
0,8
0,8
1
1
1
Unit
weight kg
0,200
0,200
0,200
Reference
code
DSF6A 30V
DSF6A 150V
DSF6A 275V
Unit
weight kg
0,4
0,4
0,4
45
Part No.
Description
702090
701000
701030
6A, 30V
6A, 150V
6A, 275V
SURGE PROTECTION
Reference
code
DSD1150 2SR 275
SURGE PROTECTION
LOCAL AREA NETWORK PROTECTORS (LAN)
Reference
code
TDX100M277/480TT
TDX200M277/480TT
Part No.
Description
702428
702429
100kA, 277/480V
200kA, 277/480V
Unit
weight kg
1,400
2,000
1
1
Reference
code
LANRJ45C6
LANRJ45POE
LANRJ45RAK
Part No.
Description
702861
702862
702863
702864
702866
702886
702887
702888
702889
702891
5V, 1.5A
15V, 1.5A
30V, 1.5A
60V, 1.5A
110V, 1.5A
5V, 8A, 2 Pair
15V, 8A, 2 Pair
30V, 8A, 2 Pair
60V, 8A, 2 Pair
110V, 8A, 2 Pair
Unit
weight kg
0,100
0,100
0,100
0,100
0,100
0,100
0,100
0,100
0,100
0,100
1
1
1
1
1
1
1
1
1
1
Description
700528
700529
700531
RJ45, CAT6
RJ45, POE
Rackmount Kit
Unit
weight kg
0,120
0,120
0,820
1
1
1
Reference
code
UTB5SP
UTB15SP
UTB30SP
UTB60SP
UTB110SP
UTB5DP
UTB15DP
UTB30DP
UTB60DP
UTB110DP
Part No.
Reference
code
SLP10K1F
HSP10K12
HSP10K36
HSP10K72
HSP10K230
DLT
Part No.
Description
701540
700815
700805
700850
700860
702721
1
1
1
1
1
1
Unit
weight kg
0,100
0,100
0,100
0,100
0,100
0,150
SURGE PROTECTION
Part No.
Description
702407
702408
702411
702412
702413
702417
702418
50kA, 277V
50kA, 560V
100kA, 240V
100kA, 277V
100kA, 560V
50kA, 277V TNC
50kA, 277V TT
1
1
1
1
1
1
1
Unit
weight kg
0,120
0,120
0,120
0,120
0,120
0,360
0,360
Part No.
Description
702535
700746
702525
703000
Cable TV Protector
Antenna TV Protector HF
Antenna TV Protector
CCTV protector (video)
1
1
1
1
Unit
weight kg
0,100
0,040
0,100
0,200
Reference
code
CSP BNC 90
CSP BNC 600
CSP NMF 90
CSP NMF 600
CSP NB 90
CSP NB 600
46
Part No.
Description
700360
700405
700310
700355
700410
700455
BNC, 90V
BNC, 600V
NMF, 90V
NMF, 600V
NB, 90V
NB, 600V
1
1
1
1
1
1
Unit
weight kg
0,200
0,200
0,200
0,200
0,200
0,200
www.erico.com
XA
PC
BY
LE
PG
PA
THE CADWELD MOULD NUMBERING SYSTEM
BD
TA
XXX-XXXX
Mould type
Mould Price Key
EXAMPLES :
www.erico.com
TA C - Y6 Y4
GT C - P143 Y6
SS C - Y4
VS C - Y2 - V76
Type TA
Price Key C
Type GT
Price Key C
Type SS
Price Key C
2 x 70 mm2 cables
47
Type VS
Price Key C
Cable 35 mm2
Vertical Pipe
76 mm Diameter Pipe
CADWELD
CADWELD PLUS
CADWELD PLUS
connections offer all the
benefits of conventional
CADWELD connections:
Withstand repeated fault currents
without failing during operation
Exceed requirements of IEEE Std
837- Std. for Qualifying Permanent
Connections Used In Substation
Grounding
Join copper to copper, copper to
galvanised or plain steel, copper to
copper clad steel, copper to bronze/
brass/stainless steel, steel to steel, etc.
Current carrying capacity equal to or
greater than that of the conductor
Permanent, molecular bond that
will not loosen or corrode, resulting in a
connection with a lifetime equal to that of
the installation
BETTER.
CADWELD PLUS is the latest advancement in the continuing evolution of ERICOs
exothermic products. Since its development in 1938, CADWELD electrical
connections have become recognized as the ultimate connection for rail, cathodic,
power and grounding applications. ERICO has established itself as the worldwide
connections leader. CADWELD PLUS continues this tradition of technical leadership.
The revolutionary CADWELD PLUS System is a simplified method of performing
exothermically welded electrical connections. The CADWELD PLUS integrated welding
material package has streamlined the installation process by eliminating ignition
materials reducing set up time.
The tamper proof, integrated welding material package consists of a steel cup
containing CADWELD patented welding material alloys and ignition source. This new
welding material package is designed for use in all standard CADWELD moulds including CADWELD MULTI. Once placed in the CADWELD mould, the welding material is
electronically ignited using a simple battery-powered control unit with six (6) foot lead.
Polymeric
Cover
CADWELD PLUS
Package
Ignitor Strip
Graphite
Mould
Tap Hole
Conductor
Weld Cavity
CADWELD PLUS
CADWELD
Feature
Benefits
Integrated Welding
Material Package
Colour Coded
Welding Material
48
www.erico.com
CADWELD PLUS
Installation Is Easy!
4 Simple Steps For Permanently Welded Electrical Connections
Part No.
Size Identification
Ring Color
Traditional Welding
Material Part Number
(Clear Cap)
15PLUSF20
25PLUSF20
32PLUSF20
45PLUSF20
65PLUSF20
90PLUSF20
115PLUSF20
150PLUSF20
200PLUSF20
250PLUSF20
300PLUSF20
400PLUSF20
500PLUSF20
165700
Black
Red
White
Light Blue
Dark Green
Gray
Orange
Dark Blue
Yellow
Purple
Light Green
Brown
Light Brown
15
25
32
45
65
90
115
150
200
250
use 2 x 150
use 2 x 200
500
165701
165702
165703
165704
165705
165706
165707
165708
165709
165710
165711
165712
Part No.
Size Identification
Ring Color
Traditional Welding
Material Part Number
(Green Cap)
CA15PLUSF33
CA25PLUSF33
CA32PLUSF33
CA45PLUSF33
CA65PLUSF33
165713
165714
165715
165716
165717
Black
Red
White
Light Blue
Dark Green
CA15/CA15S
CA25
CA32
CA45
CA65
Accessories
Reference Code Part No.
PLUSCU
CADWELD PLUS Patent Numbers
PLUSCULD
PLUSCU
PLUSCU15L
PLUSCULD
PLUSCULD15
165738
165745
165739
165746
Description
CADWELD PLUS Control Unit
CADWELD PLUS Control Unit with 15 ft. (4.6 meters) Lead
CONTROL UNIT Replacement Lead 6 ft. (1.8 meters)
CONTROL UNIT Replacement Lead 15 ft. (4.6 meters)
CADWELD
www.erico.com
49
Welding
Material
Size
Traditional CADWELD
Reference
code
Part No.
CADWELD PLUS
Unit
Weight kg
Disk
Type*
Reference
code
Part No.
19
19
19
19
19
25
25
38
38
38
15PLUSF20
25PLUSF20
32PLUSF20
45PLUSF20
65PLUSF20
90PLUSF20
115PLUSF20
150PLUSF20
200PLUSF20
250PLUSF20
300PLUSF20
400PLUSF20
500PLUSF20
165700
165701
165702
165703
165704
165705
165706
165707
165708
165709
165710
165711
165712
20
20
20
20
20
10
10
10
10
10
10
10
10
0,049
0,063
0,065
0,086
0,104
0,158
0,185
0,217
0,267
0,353
0,376
0,480
0,585
CA15PLUSF33
CA25PLUSF33
CA32PLUSF33
CA45PLUSF33
CA65PLUSF33
165713
165714
165715
165716
165717
20
20
20
20
20
0,049
0,063
0,065
0,086
0,104
38
Unit
Weight kg
163200
163210
163220
163230
163240
163250
163260
163270
20
20
20
20
20
10
10
10
0,015
0,025
0,032
0,045
0,065
0,090
0,115
0,150
19
19
19
19
19
25
25
38
CADWELD
15
25
32
45
65
90
115
150
50
www.erico.com
CADWELD MULTI
Step
2
welding material
Step Deposit
and tap bottom of
3 container to release
starting material
Part Nr
Article Nr Description
Weight (kg)
KITCDMV01
167782 CADWELD MULTI Kit
1
25.000
The CADWELD MULTI kit (KITCDMV01) contains the following list of items:
FMCDMV01
120883 Handle Clamp
1
1.800
CDMV01H
240399 Mold for H welds
1
1.200
CDMV0112
240398 Mold for welds on 1/2 rods
1
1.200
CDMV0158
240397 Mold for welds on 5/8 rods
1
1.200
CDMV0134
240396 Mold for welds on 3/4 rods*
1
1.200
SCDM01
120886 Set of 33 batting/gaskets
2
0.200
B399P
162070 SKK1 clamp
1
0.500
TSCSTP
197295 Toolset
1
2.000
B136B
182030 Slag Removal Spade
1
0.144
Language free instruction sheet
1
The following items can be used with the CADWELD MULTI Kit (KITCDMV01). They are sold separately.
T320
165000 Flint Ignitor T320
1
0.090
90
163040 CADWELD Traditional welding material
10
0.090
115
163050 CADWELD Traditional welding material
10
0.115
PLUSCU
165738 Control Unit
1
1.088
PLUS#90F20
165705 CADWELD PLUS welding material
10
0.158
PLUS#115F20 165706 CADWELD PLUS welding material
10
0.185
Due to ERICO's continuous product improvement policy, products shown in this catalog are subject to change without notice.
If you would like to know more about the benefits of CADWELD MULTI contact ERICO or visit: www.erico.com
10 seconds
SS
SC
PA
TA
XA
GG
GJ
TD
TE
TF
GF
GW
XB
PP
PK
GE
PG
Copper concentric conductor sizes up to 50 mm2 (9.3 mm dia.) or 1/0 AWG (0.37 dia.)
RG
RH
RK
RF
RD
BB
Copper concentric conductor sizes up to 50 mm2 (9.3 mm dia.) or 1/0 AWG (0.37 dia.)
Copper or steel strip sizes up to 30 x 3,5 mm (1.2 x 0.14)
Rebar sizes up to 10 mm (#3)
CG
BG
HA
HC
HS
HT
GL
EB
LA
LJ
LE
BB
Copper concentric conductor sizes up to 50 mm2 (9.3 mm dia.) or 1/0 AWG (0.37 dia.)
Copper or steel lug / strip sizes up to 30 x 3,5 mm (1.2 x 0.14)
CG
TG
GT
CN
CP
GR
GT
Copper concentric conductor sizes up to 10 mm2 (4.2 mm dia.) or #6 AWG (0.18 dia.)
Copper strip sizes up to 30 x 2,0 mm (1.2 x 0.08)
www.erico.com
CN
CP
GR
Copper concentric conductor sizes greater than 10 mm2 (4.2 mm dia.) or #6 AWG (0.18 dia.)
Copper strip sizes 30 x (2,5 - 3,0 mm) or 1.2 x (0.10 0.12)
Steel strip sizes 30 x (0,5 - 3,5 mm) or 1.2 x (0.02 0.14)
51
CADWELD
CADWELD
Mould
SS
TA
A
B
XA
A
B
PG
PT
PC
LJ
LW
A
HA
A
LE
VG
VS
A
CADWELD
Reference
code
SSC-W6
SSC-W8
SSC-Y1
SSC-Y2
SSC-Y3
SSC-Y4
SSC-Y5
SSC-Y6
TAC-Y1
TAC-Y2
TAC-Y2-Y1
TAC-Y3
TAC-Y4
TAC-Y4-Y2
TAC-Y5
TAC-Y5-Y6
TAC-Y6
TAC-Y6-Y4
TAC-Y7
TAC-Y8
XAC-Y1
XAC-Y2
XAC-Y3
XAC-Y4
XAC-Y5
XAC-Y6
PGC-Y1
PGC-Y2
PGC-Y3
PGC-Y4
PGC-Y4-Y1
PGC-Y5
PGC-Y6
PTC-Y1
PTC-Y2
PTC-Y3
PTC-Y4
PTC-Y5
PTC-Y6
PCC-Y1
PCC-Y3
PCC-Y6
LJP-Y1-BAK
LJP-Y2-BAK
LJP-Y3-BAK
LJC-Y3-FAM
LWP-Y3-BAK
HAA-Y1
HAA-Y1-CA
HAA-Y2
HAA-A3
HAA-Y3
HAA-Y4
HAA-B3-CA
HBA-B3
LEP-Y3-BAK
Part No.
221008
221011
221004
221006
221009
221021
221013
221014
221025
221028
221063
222459
221035
221075
222461
225026
222463
221094
221051
221053
221135
221138
221142
221148
221153
221159
237901
232556
232648
231342
236084
223943
231692
221268
226545
221265
221258
221256
222115
223550
222560
230199
234737
234738
234739
232933
234782
221609
221466
221607
222689
221603
221534
240228
223044
234759
Diameter
Amm
Bmm
8,0
8,0
10,0
10,0
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
7,6
6,4
9,0
9,0
11,0
11,0
11,0
7,6
12,5
12,5
12,5
14,2
14,2
14,2
14,2
11,0
15,9
15,9
17,7
17,7
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
11,0
6,4
12,5
12,5
14,2
14,2
6,4
6,4
7,6
7,6
9,0
9,0
11,0
11,0
12,5
12,5
14,2
14,2
6,4
6,4
9,0
9,0
14,2
14,2
6,4
7,6
9,0
9,0
9,0
6,4
6,4
7,6
8,0
9,0
11,0
4,9
4,9
9,0
Section
Amm2
Bmm2
50
50
78,5
78,5
25
25
35
35
50
50
70
70
95
95
120
120
25
25
35
35
35
25
50
50
70
70
70
35
95
95
95
120
120
120
120
70
150
150
185
185
25
25
35
35
50
50
70
70
95
95
120
120
25
25
35
35
50
50
70
70
70
25
95
95
120
120
25
25
35
35
50
50
70
70
95
95
120
120
25
25
50
50
120
120
25
60
35
60
50
60
50
250
50
60
25
25
35
40
50
70
14,5-16
14,5-16
50
60
Sizes
mm
30x2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
1,37
1,37
1,37
1,37
1,37
1,37
1,75
1,75
1,37
1,37
1,37
1,37
1,37
1,37
1,37
1,37
1,57
1,57
1,57
1,57
1,37
1,37
1,37
1,37
1,57
1,75
1,37
1,37
1,37
1,37
1,37
1,57
1,57
1,75
1,75
1,75
1,75
1,97
1,97
1,37
1,75
1,97
0,70
0,70
0,70
1,37
0,70
0,31
0,31
0,31
0,31
0,31
0,45
0,19
0,31
0,60
30x2
25x3
25x3,5
25x3/30x2
30x2
30x2
25x3
25x3,5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1,37
1,37
1,75
1,75
1,97
1,97
1,57
1,57
1,57
1,57
0,87
0,87
0,87
0,60
0,87
0,85
0,58
0,58
30x2
30x2
30x2
50x5
30x2
Remarks
Solid core cable horizontal splice
Multi -strand cable to cable splice
Cable to cable
Cable to tape
Sleeve : H105
Tape to cable
BM
A
EB
VGC-Y1
VGC-Y2
VGC-Y3
VGC-Y4
VGC-Y5
VGC-Y6
VSC-Y3
VSC-Y4
VSC-Y5
VSC-Y6
BMP-BAK
BMP-CAJ
G-BMP-DAJ
BMP-CAJ-BAK
EBP-BAK
EB-BGP-BAK
EBP-CAJ
G-EBP-DAJ
228521
224815
222939
228347
223076
223609
221407
221405
221404
221403
234429
234426
224123
234736
225788
234398
234991
223432
6,4
7,6
9,0
11,0
12,5
14,2
9,0
11,0
12,5
14,2
25
35
50
70
95
120
50
70
95
120
60
75
87,5
75
60
60
75
87,5
60
75
87,5
60
60
60
75
87,5
52
Tape to tape
Tape to tape
www.erico.com
Weld metal
size required
45
65
32
32
45
65
90
115
32
45
45
90
90
45
115
150
150
90
200
200
45
65
90
115
150
200
45
65
90
115
90
150
200
45
65
90
115
200
250
45
90
200
65
65
90
90
90
45
32F33
45
45
45
65
15F33
25
65
Frame
Page 53
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-161
L-160
L-161
M-129
M-129
M-129
M-129
M-129
M-129
M-129
M-129
L-161
Toolset
Page 55
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
Scraper tools
Page 55
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-7A
TP-7A
TP-3B
TP-3B
TP-3B
TP-7A
TP-7A
TP-3B
TP-7A
TP-2A
TP-2A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-3B
TP-7A
TP-2A
TP-5B
TP-5B
TP-5B
TP-7A
TP-5B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-3B
TP-5B
45
45
115
115
150
150
90
90
115
115
65
65
65
90
90
90
65
65
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-161
L-161
L-161
L-161
L-161
L-161
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-3B
TP-3B
TP-7A
TP-7A
TP-2A
TP-2A
TP-7A
TP-7A
TP-7A
TP-7A
TP-5B
TP-5B
TP-5B
TP-2A
TP-5B
TP-5B
TP-5B
TP-5B
www.erico.com
PLUSCU
Reference code
Part No.
PLUSCU
PLUSCU15L
PLUSCULD
PLUSCULD15
165738
165745
165739
165746
Description
Control Unit with 1,80 m lead
Control Unit with 4,60 m lead
Replacement Lead 1,80 m long
Replacement Lead 4,60 m long
1
1
1
1
Unit
weight kg
0,907
1,088
0,146
0,306
T320A
T320
Reference code
Part No.
T320
T320A
165000
165010
1
10
Unit
weight kg
0,090
0,015
BRUSHES
T314A
T314
KIT-120-3/4
T313
Reference code
Part No.
T313
T314
T314A
KIT-120-3/4
165040
165130
165270
165260
1
1
1
1
Unit
weight kg
0,070
0,375
0,070
0,040
CADWELD
CADWELD
53
CADWELD
Reference
code
CHP-BAK
Mould
Part No.
Diameter
Amm
Bmm
Section
Bmm2
Sizes
mm
30x2
Unit
weight kg
0,70
Remarks
234733
Amm2
60
CGP-BAK
234732
60
30x2
0,70
CCP-BAK
234734
60
30x2
0,70
CFP-BAK
CFP-CAJ
G-CFP-DAJ
BWP-BAK
232003
233366
225147
239887
60
75
87,5
60
30x2
25x3
25x3,5
30x2
1
1
1
1
0,52
0,70
0,70
0,90
GRC-P172-Y3
B-GRC-P143-Y3
226567
238039
17,2
14,2
9,0
9,0
232,4
160,6
50
50
1
1
1,75
1,75
14,2
14,2
14,2
14,2
14,2
17,2
17,2
17,2
17,2
17,2
19
14,2
17,2
12,8
14,2
12,8
14,2
160,6
160,6
160,6
160,6
160,6
232,4
232,4
232,4
232,4
232,4
283,5
160,6
232,4
128,7
158
25
35
50
70
95
25
35
50
70
95
66,5
60
60
128,7
158
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1,75
1,75
1,75
1,57
1,57
1,75
1,75
1,57
1,57
1,57
1,57
0,70
0,68
1,75
1,97
233901
229737
225814
232996
223520
228682
226670
226083
227687
227549
223138
234735
239694
232537
237727
6,4
7,6
9,0
11,0
12,5
6,4
7,6
9,0
11,0
12,5
10,7
A
GE
GTC-P143-Y1
GTC-P143-Y2
GTC-P143-Y3
GTC-P143-Y4
GTC-P143-Y5
GTC-P172-Y1
GTC-P172-Y2
GTC-P172-Y3
GTC-P172-Y4
GTC-P172-Y5
GTC-P190-2G
CPP-P143-BAK
CPP-P172-BAK
GEC-P128
GEC-P143
A
GF
GFC-P143-Y3
GFC-P165-G2-B
238544
238556
14,2
16,5
9,0
9,5
160,6
214
50
50
1
1
1,75
1,75
LAC-Y1-BAH
LAC-Y1-CAJ
LAC-Y2-BAH
LAC-Y2-CAJ
LAZ-Y3-BAK
LAC-Y3-BAH
LAC-Y3-BAJ
LAC-Y3-CAJ
LAC-L9-EAK-A
BJC-BAK-CROW
224800
222501
224150
221443
234740
239534
222122
221455
233795
234770
6,4
6,4
7,6
7,6
9,0
9,0
9,0
9,0
10,0
25
25
35
35
50
50
50
50
60
60
40
75
40
75
60
40
50
75
120
60
20x2
25x3
20x2
25x3
30x2
20x2
25x2
25x3
30x4
30x2
1
1
1
1
1
1
1
1
1
1
1,37
1,37
1,37
1,37
0,70
1,37
1,37
1,37
1,75
2,20
BYC-BAK-CROW
234760
60
60
30x2
1,60
RCP-Y1
RCP-Y2
RCP-Y3
RCP-Y4
RCP-Y5
RCP-Y6
RTP-Y1
RTP-Y2
RTP-Y3
RTP-Y4
RTP-Y5
RTP-Y6
234581
234585
234582
234588
234592
234593
234441
234444
234445
234447
234453
234454
S-2904B
S-2904B
S-2904B
S-2904B
S-2904B
S-2904C
S-2904B
S-2904B
S-2904B
S-2904B
S-2904A
S-3121
Batting
25
35
50
70
95
120
25
35
50
70
95
120
1
1
1
1
1
1
1
1
1
1
1
1
0,68
0,68
0,68
0,68
0,68
0,68
0,62
0,62
0,62
0,62
0,62
0,62
CH
CG
CC
A
CF
BW
GR A
B
A
GT
B
CP
LA
30x2
30x2
RC
B
6,4
7,6
9
11
12,5
14,2
6,4
7,6
9
11
12,5
14,2
CADWELD
A
RT
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
10-40
54
www.erico.com
Weld metal
size required
90
Frame
Page 53
L-161
Toolset
Page 55
TS CST
Scraper tools
Page 55
TP-5B
FRAMES
L160
90
L-161
TS CST
TP-5B
90
L-161
TS CST
TP-5B
65
65
65
65
L-161
L-161
L-161
L-161
TS CST
TS CST
TS CST
TS CST
TP-5B
TP-5B
TP-5B
TP-5B
90
115
L-160
L-160
TS CST
TS CST
TP-7A
TP-7A
90
90
90
115
115
90
90
115
115
115
115
90
115
150
150
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-160
L-161
L-161
L-160
L-160
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-7A
TP-5B
TP-3B
TP-7A
TP-2A
90
115
L-160
L-160
TS CST
TS CST
TP-7A
TP-7A
32
45
32
45
90
45
45
65
90
115
L-160
L-160
L-160
L-160
L-161
L-160
L-160
L-160
L-160
L-160
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-3B
TP-3B
TP-3B
TP-3B
TP-5B
TP-3B
TP-3B
TP-3B
TP-7A
TP-2A
200
L-160
TS CST
TP-2A
45
45
65
90
90
90
45
45
90
90
90
115
L-161A
L-161A
L-161A
L-161A
L-161A
L-161A
SMK 21
SMK 21
SMK 21
SMK 21
SMK 21
SMK 21
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TS CST
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
TP-5B
161000
161740
161020
L159
B135
161780
161010
L161
L160V
161660
L161A
161090
SMK21
161080
SKK1
162070
M129
161030
M32
161060
Reference code
L160
L159
L161
B134
B135
L161A
L160V
M129
M32
SMK21
SKK1
www.erico.com
B134
55
Part No.
161000
161020
161010
161740
161780
161090
161660
161030
161060
161080
162070
1
1
1
1
1
1
1
1
1
1
1
Unit
weight kg
1,185
1,325
0,380
0,360
0,414
1,010
1,775
0,315
0,880
0,670
0,500
CADWELD
CADWELD
CADWELD
RASP
Reference code
Part No.
T321C (complete)
162630
Unit
weight kg
0,740
Reference code
Sizes
mm
50x60x12
50x60x20
50x60x25
Part No.
S2904C
S2904B
S2904A
185030
185020
185010
Available on
Request
C
B
Reference code
Part No.
B265
165020
Unit
weight kg
0,348
Reference
code
H101
H102
H103
H104
H105
H107
H108
H109
H113
H115
H117
T403
25
25
25
COPPER SLEEVES
Reference code
Unit
weight kg
0,005
0,008
0,009
Part No.
165280
Reference code
B136A
B136B
B136F
11200300
Part No.
11200327
11200330
140160
140180
180140
180170
180180
180190
180230
180690
180010
180020
180350
180700
180430
B
mm
6
4,3
5,3
17
3
9
18
12
8
4,83
7
C
mm
26
25
25
26
23,5
26
26
26
26
25
25
Unit
weight kg
0,005
0,004
0,006
0,013
0,003
0,008
0,014
0,010
0,007
0,003
0,006
50
50
50
50
50
50
50
50
50
50
50
Part No.
182125
182130
182135
Equivalent
Ref. Code
TP5A, TP3A, TP5B
TP2A, TP6A, TP7A
TP4A
1
1
1
Unit
weight kg
0,045
0,077
0,080
WRAP SLEEVE
1
1
Unit
weight kg
0,260
0,100
CADWELD
Reference code
A
mm
8
6,4
7,7
19
5
11
20
14
10
6,35
9
Part No.
SCRAPER TOOLS
Unit
weight kg
0,910
11200327
56
Reference code
Part No.
B140
165610
Dimensions
mm
76x25x0,20
25
Unit
weight kg
0,001
www.erico.com
CADWELD
TOOLSET
SLEEVES
Available on
Request
Length
+ flair
B
A
C
Reference
code
H101F
H102F
H103F
H104F
H106F
H107F
H108F
H109F
H111F
H112F
H113F
H114F
H116F
H117F
H104BF
H106AF
H109AF
H111AF
H113AF
Part No.
180150
180390
180380
180200
180250
180270
180280
180300
180320
180340
180360
180040
180740
180080
180220
180260
180310
180330
180030
A
mm
8
6,4
7,7
19
17
11
20
14
15
12
10
25
13
9
19
17
14
15
10
B
C
mm mm
6
25
4,3 25
5,3 25
17 25
15 25
9
25
18 25
12 25
13 25
10 25
8
25
21 25
11,5 25
7
25
17 34
15 34
12 34
13 34
8
34
Length
+ flair
26
26
26
26
26
26
26
26
26
26
26
26
26
26
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Unit
weight kg
0,005
0,004
0,006
0,013
0,009
0,008
0,014
0,010
0,011
0,008
0,007
0,032
0,007
0,006
0,018
0,012
0,013
0,014
0,009
Unit
weight kg
4,898
Reference code
Part No.
TS-CSTP
197295
Unit
weight kg
0,450
TOOL BOXES
T396
Part No.
T396
162436
CADWELD
Reference code
www.erico.com
57
Reference code
CPD-2440
CTR-10
CCR-68-S
CCR-68-CU
CCR-68-GS
ASL-240-CC
ARC-2205-CNC
ARC-2210-CNC
ER1-2000
ER1-ARCC-SS
ER2-2000
ER3-2000
TFS 800
ARC-2205-SS
ARC-2210-SS
ASB-TCA
ASP-100-TS
ASA-TB
ABFF-6530-TC
ABFR-6530-TC
ASFR-C
ATR-10-SS
ACB-10-SS
AEM-10-SS
CCI-70-CA
PCF-40-GS
PCR-21-GS
IP-900-C
IP-R193x122MM
IP-SQ-180CI
SRL23-N6
SRL-23-N8
SRL-23-N10
R1-SRL-25A6
R1-SFT-25
R2-SRL-25
R2-SFT-25
R3SFT-25
R6-SRL-40/6
R6-SFT-40
T1-SRL-25/6
T1-SFT-25
SFR-BC-8
SFT-BE
SFT-BC
SFRR-SRL-45/6
SFRR-SFT-45
SFRR-SFT-65
SPC-5080-S
SPC-70120-S
SPC-130180-S
SPC-5080-C
SPC-70120-C
SPC-130180-C
SGR-610-2
SDH-3-GI
SSF-6-GS
SSF-6-C
STBF-25-GS
STBF-40-GS
SFT-23-N
SFTP-23-N
MPSC404SS
FMCDMV01
SCDM01
11200327
11200330
1,2M38
1,5M38
2,1M38
3,0M38
1,2M12
1,5M12
2,1M12
3,0M12
S1,2M916
S1,5M916
S2,1M916
S3,0M916
1,2M58
1,5M58
2,1M58
3,0M58
S1,2M58
S1,5M58
S2,1M58
S3,0M58
1,2M34
1,5M34
2,1M34
3,0M34
S1,2M34
S1,5M34
S2,1M34
S3,0M34
C19
C20
CC12F
CC58
CC34
SC916
SC58
SC34
DT12
DT58
Page
Part No.
41
29
29
29
29
23
24
24
23
19
23
23
23
24
24
24
24
24
24
24
24
25
25
25
27
27
27
39
39
39
28
28
28
27
27
27
27
28
28
28
28
28
29
29
29
28
28
28
40
40
40
40
40
40
40
27
39
39
39
39
28
28
38
51
51
56
56
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
38
38
35
35
35
35
35
35
35
35
158080
158090
158100
158110
158120
158130
158140
158155
158160
158165
158170
158175
158185
158250
158260
158290
158380
158400
158410
158440
158450
158500
158510
158520
158530
158540
158550
158610
158675
158690
158710
158720
158730
158760
158770
158780
158810
158922
161000
161010
161020
161030
161060
161080
161090
161660
161740
161780
162070
162230
162630
163000
163010
163020
163030
163040
163050
163060
163070
163080
163090
163200
163210
163220
163230
163240
163250
163260
163270
163590
163670
165000
165010
165020
165040
165130
165180
165220
165230
165260
165270
165280
165400
165410
165610
165620
165700
165700
165701
165701
165702
165702
165703
165703
165704
165704
165705
165705
165706
165706
165707
165707
165708
165708
165709
Reference code
DT34
DS916
DS58
DS34
DH12
DH58
DH34
CP38
C58
CP58
C34
CP34
SP58
C1
C12
PT-58-50/300
DH-TR167
DT-P137-1-20
RTC1
S-136-20
MR127Z/20
EGRD58
EGRD58L
EGRD34
EGRD34L
15SS20
DT-P11-20-SS
PT-12-25/300
PT-58-25/300
PT-58-35/300
1,0CG50/5
1,5CG50/5
2,0CG50/5
1,0CG50/3
1,5CG50/3
2,0CG50/3
1,5SG20
WGRS200
L160
L161
L159
M129
M32
SMK21
L161A
L160V
B134
B135
SKK1
B-162-12KS
T321C (complete)
25
32
45
65
90
115
150
200
250
500
CA15
CA25
CA32
CA45
CA65
CA90
CA115
CA150
15
GEM
T320
T320A
B265
T313
T314
B165
B166
B167
KIT-120-3/4
T314A
T403
B2618B
B2610A
B140
B2671A
15PLUSF20
15PLUSF20
25PLUSF20
25PLUSF20
32PLUSF20
32PLUSF20
45PLUSF20
45PLUSF20
65PLUSF20
65PLUSF20
90PLUSF20
90PLUSF20
115PLUSF20
115PLUSF20
150PLUSF20
150PLUSF20
200PLUSF20
200PLUSF20
250PLUSF20
Page
Part No.
35
35
35
35
35
35
35
38
38
38
38
38
38
38
38
36
37
37
38
38
37
38
38
38
38
37
37
36
36
36
37
37
37
37
37
37
37
39
55
55
55
55
55
55
55
55
55
55
55
43
56
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
39
53
53
56
53
53
42
42
42
53
53
56
41
41
56
41
49
50
49
50
49
50
49
50
49
50
49
50
49
50
49
50
49
50
49
165709
165710
165710
165711
165711
165712
165712
165713
165713
165714
165714
165715
165715
165716
165716
165717
165717
165738
165738
165739
165739
165745
165745
165746
165746
166000
166010
166020
166030
166040
166050
166060
166070
166080
166090
166100
166110
166120
166130
166140
166150
166160
166170
166180
166190
166200
166210
166220
166510
166520
166530
166540
166550
166560
167782
167900
167901
167902
167903
167904
167905
167906
180010
180020
180140
180170
180180
180190
180230
180350
180430
180690
180700
182125
182130
182135
185010
185020
185030
197650
197710
197720
197810
197860
197870
197900
197910
197920
197930
197940
197950
197970
197975
198000
198010
198020
198050
198060
198070
198080
198090
198150
198160
198200
198210
58
Reference code
250PLUSF20
300PLUSF20
300PLUSF20
400PLUSF20
400PLUSF20
500PLUSF20
500PLUSF20
CA15PLUSF33
CA15PLUSF33
CA25PLUSF33
CA25PLUSF33
CA32PLUSF33
CA32PLUSF33
CA45PLUSF33
CA45PLUSF33
CA65PLUSF33
CA65PLUSF33
PLUSCU
PLUSCU
PLUSCULD
PLUSCULD
PLUSCU15L
PLUSCU15L
PLUSCULD15
PLUSCULD15
B161-8A
B161-8K
B161-8KS
B161-10B
B161-10KA
B161-10KM
B164-12A
B164-12K
B164-12KS
DB-8A
DB-8K
DB-8KS
DB-10A
DB-10K
DB-10KS
DB-12A
DB-12K
DB-12KS
DB-16A
DB-16K
DB-16KS
B-162-12A
B-162-12K
B161-10-C5005
B161-10-C501
B161-10-C502
B-162-12-C5005
B-162-12-C501
B-162-12-C502
KITCDMV01
SRGBC120
SRGBD100
SRGBE100
SRGBF100
SRGBG100
SRGC46
SRGC46BR
H108
H109
H101
H102
H103
H104
H105
H113
H117
H107
H115
B136A
B136B
B136F
S2904A
S2904B
S2904C
TC-EC-3020-30
TC-ECT-3020-30
TC-ECT-2530-30
30TC-HGSP-3035
RSCC-8
RSCC-10
SC-EC-25
SC-EC-35
SC-EC-50
SC-EC-70
SC-EC-95
SC-EC-185
TC-ECT-4030-30
TC-ECT-4040-35
IC-EC-25
IC-EC-35
IC-EC-50
IC-ECH-25
IC-ECH-35
IC-ECH-50
IC-ECH-70
IC-ECH-95
RC-EC-6
RC-EC-8
RC-ET-6
RC-ET-8
Page
Part No.
50
49
50
49
50
49
50
49
50
49
50
49
50
49
50
49
50
49
53
49
53
49
53
49
53
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
51
31
31
31
31
31
31
31
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
30
30
30
32
32
32
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
31
31
31
31
198250
198400
198401
198402
198403
198404
198406
198407
198408
198410
198411
198420
221004
221006
221008
221009
221011
221013
221014
221021
221025
221028
221035
221051
221053
221063
221075
221135
221138
221142
221148
221153
221159
221256
221258
221265
221268
221403
221404
221405
221407
221443
221455
221466
221534
221603
221607
221609
222115
222122
222459
222461
222463
222501
222560
222689
222939
223044
223076
223138
223432
223520
223550
223609
223943
224123
224150
224800
224815
225026
225147
225788
225814
226083
226545
226567
226670
227549
227687
228347
228521
228682
229737
230199
231342
231692
232003
232537
232556
232648
232933
232996
233366
233795
233901
234398
234426
234429
234441
234444
234445
234447
234453
234454
234581
Reference code
RAW-8
A822SA111C-5
FC073
FC074
FC075
FC076
FC078
FC079
FC080
A822SA111C-10
FC082
A822SA111C-20
SSC-Y1
SSC-Y2
SSC-W6
SSC-Y3
SSC-W8
SSC-Y5
SSC-Y6
SSC-Y4
TAC-Y1
TAC-Y2
TAC-Y4
TAC-Y7
TAC-Y8
TAC-Y2-Y1
TAC-Y4-Y2
XAC-Y1
XAC-Y2
XAC-Y3
XAC-Y4
XAC-Y5
XAC-Y6
PTC-Y5
PTC-Y4
PTC-Y3
PTC-Y1
VSC-Y6
VSC-Y5
VSC-Y4
VSC-Y3
LAC-Y2-CAJ
LAC-Y3-CAJ
HAA-Y1-CA
HAA-Y4
HAA-Y3
HAA-Y2
HAA-Y1
PTC-Y6
LAC-Y3-BAJ
TAC-Y3
TAC-Y5
TAC-Y6
LAC-Y1-CAJ
PCC-Y3
HAA-A3
VGC-Y3
HBA-B3
VGC-Y5
GTC-P190-2G
G-EBP-DAJ
GTC-P143-Y5
PCC-Y1
VGC-Y6
PGC-Y5
G-BMP-DAJ
LAC-Y2-BAH
LAC-Y1-BAH
VGC-Y2
TAC-Y5-Y6
G-CFZ-DAJ
EBP-BAK
GTC-P143-Y3
GTC-P172-Y3
PTC-Y2
GRC-P172-Y3
GTC-P172-Y2
GTC-P172-Y5
GTC-P172-Y4
VGC-Y4
VGC-Y1
GTC-P172-Y1
GTC-P143-Y2
PCC-Y6
PGC-Y4
PGC-Y6
CFZ-BAK
GEC-P128
PGC-Y2
PGC-Y3
LJP-Y3-FAM
GTC-P143-Y4
CFZ-CAJ
LAC-L9-EAK-A
GTC-P143-Y1
EB-BGP-BAK
BMP-CAJ
BMP-BAK
RTP-Y1
RTP-Y2
RTP-Y3
RTP-Y4
RTP-Y5
RTP-Y6
RCP-Y1
Page
32
41
41
41
41
41
41
41
41
41
41
41
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
54
54
52
52
52
52
52
52
54
52
52
52
54
52
52
52
52
52
54
52
54
52
52
52
52
54
54
52
52
54
52
54
54
52
54
54
54
54
52
52
54
54
52
52
52
54
54
52
52
52
54
54
54
54
52
52
52
54
54
54
54
54
54
54
www.erico.com
Reference code
RCP-Y3
RCP-Y2
RCP-Y4
RCP-Y5
RCP-Y6
CGP-BAK
CHP-BAK
CCP-BAK
CPP-P143-BAK
BMP-CAJ-BAK
LJP-Y1-BAK
LJP-Y2-BAK
LJP-Y3-BAK
LAZ-Y3-BAK
LEP-Y3-BAK
BYC-BAK-CROW
BJC-BAK-CROW
LWP-Y3-BAK
EBP-CAJ
PGC-Y4-Y1
GEC-P143
PGC-Y1
B-GRC-P143-Y3
GFC-P143-Y3
GFC-P165-G2-B
LAC-Y3-BAH
CPZ-P172-BAK
BWZ-BAK
HAA-B3-CA
CDMV0134
CDMV0158
CDMV0112
CDMV01H
ALUM 3ME
MBMAST3ME
GF-302
WM3-2088-B
WM2-1030-B
WM3-1020-B
WM2-1020-B
WMS-1030-B
PC2.-1020
PC3-0909
DLUNI
SEB-GER-08
SEB-06
SEB-06-DL
SEB-10
SEB-10-DL
SEB-62-DL
BEP25x5x200
BEP25x5x300
CCS-308
CCG-308
SEP
TC-ECT-3020-75
RC-EC-8-3
SR
CCFR-308
BEP25x5x150
HDB5010
MBJ 16-100-8
MBJ 16-150-8
MBJ 16-200-8
MBJ 16-250-8
MBJ 16-300-8
MBJ 25-100-10
MBJ 25-150-10
MBJ 25-200-10
MBJ 25-250-10
MBJ 25-300-10
MBJ 30-100-10
MBJ 30-150-10
MBJ 30-200-10
MBJ 30-250-10
MBJ 30-300-10
MBJ 35-100-10
MBJ 35-150-10
MBJ 35-200-10
MBJ 35-250-10
MBJ 35-300-10
MBJ 50-100-10
MBJ 50-150-10
MBJ 50-200-10
MBJ 50-250-10
MBJ 50-300-10
MBJ 16-500-8
MBJ 25-500-10
MBJ 30-500-10
MBJ 35-500-10
MBJ 50-500-10
MBJ 16-200-6
MBJ 16-300-6
MBJ 25-200-6
MBJ 50-200-6
MBJ 50-200-16
MBJ 50-200-18
MBJ 50-300-16
MBJ 50-300-18
MBJ 25-200-12
MBJ 50-200-12
MBJ 16-100-6
MBJ 16-150-6
MBJ 50-500-12
MBJ 35-250-25
www.erico.com
Page
Part No.
54
54
54
54
54
54
54
54
54
52
52
52
52
54
52
54
54
52
52
52
54
52
54
54
54
54
54
54
52
51
51
51
51
18
18
39
31
31
31
31
31
31
31
40
40
40
40
40
40
40
39
39
27
27
40
30
31
27
27
39
31
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
591080
591230
591280
591290
700001
700002
700003
700004
700005
700006
700310
700355
700360
700405
700410
700455
700528
700529
700531
700746
700805
700815
700850
700860
701000
701030
701280
701305
701315
701320
701340
701350
701360
701370
701380
701390
701410
701420
701460
701535
701536
701537
701540
701840
701875
701895
701915
701990
702005
702030
702045
702050
702065
702085
702089
702090
702165
702175
702180
702230
702240
702250
702255
702260
702265
702270
702275
702280
702285
702290
702295
702296
702297
702298
702299
702301
702306
702400
702407
702408
702411
702412
702413
702417
702418
702420
702426
702428
702429
702460
702465
702478
702491
702496
702506
702521
702525
702530
702535
702560
702566
702581
702591
702601
702721
Reference code
CEI20
FEI20
BEI20
42014
TDF3A120V
TDF3A240V
TDF10A120V
TDF10A240V
TDF20A120V
TDF20A240V
CSP NMF 90
CSP NMF 600
CSP BNC 90
CSP BNC 600
CSP NB 90
CSP NB 600
LANRJ45C6
LANRJ45POE
LANRJ45RAK
CATV HF
HSP10K36
HSP10K12
HSP10K72
HSP10K230
DSF6A 30V
DSF6A 275V
GUYRING
GUYKIT 4MGRIP
GUYKIT 7MGRIP
I/LCOUPL
MBMAST4M
MBMAST5M
MBMAST6M
ALUM 4M
ALUM 5M
ALUM 6M
CONSAD/FX
CABTIE-SS
UBOLT
SI25
SI40
SI65
SLP10K1F
THERMLUGCOUPL
ERICORE/PER M
ERICORE/TRM/IS
ERICORE/TRM/OS
CONSAD/E2
ERICORE/LT KITA
FRP/2M/BLACK
FRP/4.6M/BLACK
LEC-IV
7000250S4
D/SMKIV-SS
INTMKIV-SS
DSF6A 30V
TMC-SS
ALOF1-GS
LSEB 4554
WPC
HSF
R7-SFT-20
ER1-1000-SS
ER1-2000-SS
ER2-2000-SS
ER2-3000-SS
ER3-2000-SS
ER3-3000-SS
SG-AERIAL-302
ER2-BASE
ER3-BASE
INTCPT-ADBUTT
INTCPT-ADF2BSPF
INTCPT-ADF2NSP
INTCPT-ADM3/4UNC
INTCPT-ADM116UN
INTCPT-ADM16
SGD1100 2S NE
TDS1501SR277
TDS1501SR560
TDS11002SR240
TDS11002SR277
TDS11002SR560
TDS350TNC277
TDS350TT277
DSD1150 2SR 275
SGD125 1SR NE
TDX100M277/480TT
TDX200M277/480TT
DSD160 1SR 275
DSD160 1SR 275M
DSD140 1S 75
DSD140 1S 275
DSD140 M 275
DSD140 M 440
DSD140 1SR 275
CATV MF
DSD140 1SR 440
CATV F
DSD110 1S 275
DSD110 M 275
DSD340 TNC 275 A
DSD340 TNS 275 A
DSD340 TT 275 A
DLT
Page
Part No.
27
27
27
27
45
45
45
45
45
45
46
46
46
46
46
46
46
46
46
46
46
46
46
46
45
45
19
19
19
18
18
18
18
18
18
18
19
19
18
19
19
19
46
19
18
18
18
19
18
18
18
19
18
18
18
45
24
24
24
24
29
29
19
19
19
19
19
19
24
19
19
19
19
19
19
19
19
45
46
46
46
46
46
46
46
45
45
46
46
45
45
45
45
45
45
45
46
45
46
45
45
45
45
45
46
702861
702862
702863
702864
702866
702886
702887
702888
702889
702891
702900
702901
703000
710010
710020
710030
710040
710050
710060
710070
710080
710090
710090
710100
710110
710115
710120
710120
710130
710140
710150
710160
710170
710180
710190
710200
710210
710220
710230
710240
710250
710260
710290
710295
710300
710305
710325
710335
710345
710350
710355
710360
710365
710370
710380
710390
710400
710410
710420
710430
710440
710450
710510
710515
710535
710555
710560
710580
710595
710605
710615
710616
710620
710625
710630
710645
710655
710666
710667
710670
710680
710690
710700
710710
710730
710740
710750
710760
710770
710780
710790
710800
710810
710820
710830
710840
710850
710860
710870
710900
710920
710960
710965
710980
710990
59
Reference code
UTB5SP
UTB15SP
UTB30SP
UTB60SP
UTB110SP
UTB5DP
UTB15DP
UTB30DP
UTB60DP
UTB110DP
PEC100
PEC150
CCTV 12
SSR16
AAR0515
CTR-8CU
CTR-8AL
TECLP-8-CU
TECLP-8-AL
SCR15
SCR20
CDS15
CDS15
CDS20
PBD10
SSD10
SPK15
SPK15
SPK20
EBR-58
EBR-34
500-10-E-BOSS
SFO50
PIT03
PC1.5-0606
PC3-0606
PC1.5-0909
OXINH1BCOMP
EML663
EML993
ABBC
BBBC
PFC001
PFA001
GBH C
GBH A
RC70
RC100
RTC3020
RTC2051
EK16
RTC2526
EK17
UB16
UB20
UB25
GUV16070
GUV70185
RCC10
RCC16
SRC15
SRC20
TC-EC-2530-50
TC-EC-2530-25
TC-EC-2560-15
TC-EC-3850-10
TC-EC-3860-30
TC-EC-5060-20
CTBL253-25
CTBN253-25
LSF-253
CTGN253-25
CTGN256-30
LCT-253
CTGN506-30
CTGY253-25
CTST253-25
CTWH253-25
CTYGN253-25
HDB2003
HDB2503
HDB2506
HDB3806
HDB5006
THDB5060
FAT-253-50
ATBL253
ATBN253
ATGY253
ATST253
ATWH253
SCBL
SCBN
SCGY
SCST
SABL
SABN
SAGY
SAST
SC-EC-120
SC-EC-150
BAT-2560
BAT-5060
IC-ECH-120
IC-ECH-150
Page
Part No.
46
46
46
46
46
46
46
46
46
46
42
42
46
37
23
29
29
40
40
36
36
36
36
36
36
37
36
37
36
42
42
41
42
39
31
31
31
42
31
31
40
40
25
25
26
26
41
41
38
38
41
38
41
38
38
38
38
38
39
39
39
39
30
30
30
30
30
30
30
30
30
30
30
31
30
30
30
30
30
31
31
31
31
31
31
32
32
32
32
32
32
31
31
31
31
32
32
32
32
30
30
32
32
30
30
711000
711030
711040
711050
711060
711070
711080
711090
711100
711110
711120
711130
711140
711150
711160
711170
711180
711190
711195
711200
711210
711220
711230
711240
711250
711260
711270
711341
711342
711343
711344
711345
711346
711352
711360
711370
711380
711390
711400
711410
711430
711440
711450
711470
711480
711490
711500
711520
711530
711550
711570
711580
711590
711620
711660
711730
711760
711800
711810
711820
711830
711840
CC5A04
CC5A05
CC5A12
EHL12FC1K
EHL12FC1K1K
EHL12FC1V
EHL12FC2G
EHL34C1K
EHL34C1V
EHL34C2G
EHL58C1K
EHL58C1K1K
EHL58C1V
EHL58C2G
EST3640
EST4610
EST4630
EST6472
IBTB
SDT34
SDT58
Reference code
IC-ECH-185
AVG3.0
PC010A
AAR0510
AAR1010
AAR1015
CAR0510
CAR0515
CAR1010
CAR1015
CMPR
ATBA10
ATBA15
ATBC10
ATBC15
RSC115
ABR015
CBR015
ALD-TAP302 (10x4.8x2)
TTRA16
TTRC16
DCC253
DCC256
DCC506
DCC600
DCC605
DCC610
PDCUCABBL
PDCUCABBN
PDCUCABGY
PDCUCABST
PDCUCABWH
PDCUCABGN
PDCUC
PDC506BL
PC008A
PC008C
PC010C
STA253
STC253
OBA268
OCB268
PCT400
EBL08
BIM700
BIM800
BIM900
DT50
ASCO8
TAPA253
TAPC253
TAPC254
TAPC506
TAPS302
DCC316
DCA253
DCA600
HF250BN
HF250GY
HFP253BN
HFP253GY
HFP253ST
CC5A04
CC5A05
CC5A12
EHL12FC1K
EHL12FC1K1K
EHL12FC1V
EHL12FC2G
EHL34C1K
EHL34C1V
EHL34C2G
EHL58C1K
EHL58C1K1K
EHL58C1V
EHL58C2G
EST3640
EST4610
EST4630
EST6472
IBTB
SDT34
SDT58
Page
30
27
26
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
28
23
23
25
25
25
25
25
25
25
25
25
25
25
25
25
25
26
26
26
26
26
26
26
26
41
26
26
26
42
32
25
25
25
25
28
25
25
25
26
26
26
26
26
32
32
32
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
41
35
35
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com
and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings
may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED
(INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All
other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon
ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as
provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or
return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability
shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR
DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
Due to a policy of continuing product development, specifications are subject to change without notice.
ANSI is a registered trademark of American National Standards Institute
CSA is a copyright of Canadian Standard Association International
IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc
Krone-LSA is a registered trademark of Krone GmbH.
NEC is a registered trademark of, and National Electrical Code (NEC) standard is a copyright of the National Fire Protection Association
NFPA is a registered trademark of National Fire Protection Association
UL is a registered trademark of Underwriters Laboratories, Inc.
60
www.erico.com
www.erico.com
AUSTRALIA
CHINA
HUNGARY
NORWAY
SWITZERLAND
Phone 1800-263-508
Fax 1800-423-091
Phone +86-21-3430-4878
Fax +86-21-5831-8177
Phone 06-800-16538
Fax +31-13-583-5406
Phone 800-100-73
Fax 800-100-66
Phone 0800-55-86-97
Fax 0800-55-96-15
BELGIUM
DENMARK
INDONESIA
POLAND
THAILAND
Phone 0800-757-48
Fax 0800-757-60
Phone 808-89-373
Fax 808-89-372
Phone +62-21-575-0941
Fax +62-21-575-0942
Phone +48-71-349-04-60
Fax +48-71-349-04-61
Phone +66-2-267-5776
Fax +66-2-636-6988
BRAZIL
FRANCE
ITALY
SINGAPORE
Phone +55-11-3623-4333
Fax +55-11-3621-4066
Phone 0800-901-793
Fax 0800-902-024
Phone 800-870-938
Fax 800-873-935
Phone +65-6-268-3433
Fax +65-6-268-1389
UNITED ARAB
EMIRATES
CANADA
GERMANY
MEXICO
SPAIN
UNITED KINGDOM
Phone +1-800-677-9089
Fax +1-800-677-8131
Phone 0-800-189-0272
Fax 0-800-189-0274
Phone +52-55-5260-5991
Fax +52-55-5260-3310
Phone 900-993-154
Fax 900-993-106
Phone +0808-2344-670
Fax +0808-2344-676
CHILE
HONG KONG
NETHERLANDS
SWEDEN
UNITED STATES
Phone +56-2-370-2908
Fax +56-2-369-5657
Phone +852-2764-8808
Fax +852-2764-4486
Phone +31-13-583-5400
Fax +31-13-583-5499
Phone 020-790-908
Fax 020-798-964
Phone +1-440-248-0100
Fax +1-440-248-0723
Phone +971-4-881-7250
Fax +971-4-881-7270
E905C-EUEN
E1267CT08EUEN
0087.5M9