Documente Academic
Documente Profesional
Documente Cultură
AFDX-PMC
100BASE-BX Fiber Optic AFDX Interface
A429-PMC
Multichannel/High Performance
ARINC 429 PMC Module
A429-IPM
MIL-STD-1553
26
A429-IPM-PCI
ARINC 429 PCI to IP Carrier
A429-USB
Intelligent ARINC 429 USB Device
27
28
Product Description
Purpose and Area of Application
The TechSAT A429-PMC is a powerful, multichannel ARINC 429 interface implemented
on a PMC (PCI Mezzanine Card) form factor module. It has been specially designed
to comply with high-performance test- and
simulation requirements where the ARINC
429 bus is used.
The A429-PMC features a fully parallel hardware design with strictly independent Tx-/
Rx-channel state-machines. The dual global
FIFO host interface allows for extremely simplified and accelerated board access. The
fully autonomous hardware implemented Txscheduler and the Rx-FIFO handler relieve
any host platform from realtime tasks. Receive time stamping and error detection are
also implemented in hardware.
The A429-PMC is equipped with comprehensive test features such as error injection/
detection. Galvanic isolation, bidirectional
discrete I/O lines, IRIG-B input and conformal
coating are available as an option.
29
A429-IPM
Intelligent ARINC 429 Industry Pack IP Module
- 2nd Generation
2 Tx and 4 Rx channels
On-module computing resources (20 MHz CPU, 1MB RAM | EPROM) for
maximum performance
Modular IP concept common user interface for PC104, ISA, PCI, cPCI,
VME, VXI or PXI platforms
Already used in airborne controllers (Internet server)
Extensive firmware functions for any kind of ARINC 429 application
30
Product Description
31
A429-IPM-PCI
Multichannel Multi-I/O ARINC 429 PCI Board
- 2nd Generation
32
Product Description
Purpose and Area of Application
The TechSAT intelligent A429-PCI IndustryPack PCI to IP carrier board is available in
two versions: with either 2 (short-size carrier)
or 4 (full-size carrier) IP slots, respectively.
Software Support
Comprehensive APIs are available for development environments such as MSVC, VB,
DELPHI, LabVIEW and HP VEE. Drivers are
available for Linux, Windows XP, 2000, ME,
and 9x
33
A429-USB
Intelligent ARINC 429 USB Device
34
Interface Cards
Product Description
Software Support
The A429-USB firmware is flashed from the
PC into the 1 MB Flash EPROM via the USB
interface. The firmware provides more than 50
functions, among others complex functions for
data replay and dynamic data updates using
sine, ramp and list functions.
A429-USB comes with API and driver support
for all Windows versions. USB plug&play functionality is also supported.
35
AFDX-PMC
AFDX /ARINC 664 PMC Module
36
Interface Cards
Product Description
Software Support
AFDX-PMC is shipped with a C-API and drivers for either Windows, Linux or VxWorks. In
addition, several sofware tools for test, simulation and dataloading purposes are available
on request. For test puposes, TechSAT has
developed a powerful AFDX analyzer as
well as an AFDX ES test and validation tool.
Furthermore, TechSAT has developed several
AFDX based protocol simulations for the
Airbus A380 and A400M as well as for the
Boeing 787. Finally, AFDX-PMC also supports
the TechSAT tool suite for dataloading over
ARINC 615A.
37
MIL1553-PMC
MIL-STD-1553B notice 4 compliant PMC module
38
Product Description
39
40
Application Scope
The Resistive Sensor Simulation (RSS) subsystem is designed to simulate resistive sensors such as PT100, PT500, NTC or potentiometers. The ADS-2 can directly control the
resistor value. Additional settings will enable
the use of different scales such as temperature
or pressure scales. The transformation of the
input scale to the actual resistor value is performed by the ADS-2 driver and the controller
of the RSS system.
Features and Functions
Each physical channel of the RSS is fully galvanically isolated from the other channels,
and it is located on a piggy-pack specifically
matched to the required application. The permissible common range is+/-10V The following
resistive simulator modules (RSM) are currently
available: PT100 (RSM-PT100); PT500 (RSMPT500); PT1000 (RSM-PT1000); NTC (RSMNTC); Variable Resistor 20K (RSM-R20K). Two
RMS-R20K can be configured to one potensive meter. Up to ten RSMs are mounted on a
6U VME carrier. The RSM-carrier (RSM-C) provides a serial interface and a VME bus interface
as well as analog connectors.
For each sensor a specific resistor matrix is
used to match the required resistor parameters. The resolution of the matrix is 24 bits
uncalibrated and 16 bits calibrated.
One serial controller can control up to 16 RSMC for a total of 160 channels. For high speed
and/or low channel count applications the
RSM-C can be used without the serial controller directly in a VME environment.
41
A429-BAST
ARINC 429 Bus Analyzer and Simulation Tool
42
Product Description
Hardware Support
A429-BAST supports different hardware platforms such as the TechSAT A429-PCI (carrier)
with one or more A429-IPM (A429 IP module)
for stationary solutions. For portable solutions,
A429-BAST supports the TechSAT A429-USB
(A429 over USB).
43
Realtime and offline analysis of AFDX frames in Historic, Virtual Link, or Port mode
Compliant with Airbus, Boeing and ARINC AFDX standards
On-the-fly AFDX frame resolution of protocol and payload data
Visualization of payload data decoded according to ADS2 CVT points or customer
ICD definitions
Data monitoring in absolute, relative and delta timestamp modes
Powerful online and offline search and filter options, including a user-defined binary
data mask
Graphical visualization & analyze tool for received frames
Compact & easy-to-use graphical user interface
44
Product Description
Hardware Support
The AFDX Analyzer supports the TechSAT
AFDX-PMC hardware AFDX-PM-2CTR and
AFDX-PM-2CTR-BX operated on either a passive PMC to PCI carrier or on a Motorola SBC.
In the latter case, the analyzer application runs
on a host machine (either Windows or Linux
based) connected with the SBC over an Ethernet or reflective memory interface.
The AFDX Analyzer provides seamless identification and analysis of AFDX protocols compliant with Airbus, Boeing or ARINC AFDX
standards. Among the analyze tools are realtime monitoring, recording, data replay, filter and trigger functions as well as on-the-fly
decoding of protocol and payload data. The
AFDX Analyzer also provides a tool to visualize and analyze the time schedule of received
frames. This enables the user to e.g. easily visualize the skew of frames on network A (red)
and B (blue).
Software Support
The TechSAT AFDX Analyzer is an ADS2 (Avionics Development System - 2nd Generation)
add-on application. As such it supports the
same OS platforms as ADS2, i.e. Windows
2K/XP, Linux and VxWorks.
45
A429-PCBAN
Portable A429 Bus Analyzer System
46
Product Description
Software Support
The notebook PC comes with Windows XP
and A429-BAST pre-installed.
The A429-USB-R4T2 API, being compatible
with other TechSAT A429 APIs, ensures the
capability of running the companys suite of
A429 protocol simulations as well as the companys ARINC 615-3/4 data loader software.
47
AFDX CardBus
MobileMate
48
Product Description
Mechanical Outline
Apart from the notebook PC, MobileMate consists of an expansion system which equips the
notebook with a PCI bus via the PCMCIA interface. The expansion system is a ruggedized
aluminum box with active cooling and up to 4
PCI slots depending on the version of the expansion system. The dimensions and weight
of the version with just 1 PCI slot is so small
and light that it can easily be strapped on the
back side of the notebook display. The aluminum box is connected with the notebook via a
cable to a PCMCIA card plugged into the notebooks cardbus interface.
Software Support
MobileMate comes with either Windows XP or
Linux pre-installed. It supports avionics protocol simulations such as the TechSAT A380/
A400M CMS simulation, the 787 HMPTT/OMS
simulation as well as the Remote Data Concentrator (RDC) simulation. Also the TechSAT
A615A data loading tools and AFDX Analyzer
are supported.
49