Documente Academic
Documente Profesional
Documente Cultură
PURCHASE REQUISITION
JOB NO.
PROJECT/JOB:
PAGE
CONSULTANT:
NA
MR NO. : A4-110301-DS-I-027
TITLE:
DATE
PURPOSE
For Review
S.NO.
01
BYC- 110301
1
OF
: 27.08.2014
REV.
R3
SHIPMENT REQUIRED
Please Consult Planning Dept.
ITEM NO
RESTRICTION ORIFICE
PLATES
APPROVAL OF DRAWINGS
YES
DESCRIPTION
QTY.
Scope:
Design, supply of materials, fabrication, testing
and delivery of RESTRICTION ORIFICE
PLATES as per HDO Spec. No.: A4-110301DS-I-027, Rev: R2
dated 18.09.2013
R3 DATED
27.08.2014
10 Nos.
NO
REMARKS
BY: HDO
_____________________
RECEIVED BY
PURCHASE
REQUISITIONER :
Yogesh Salvi
CHECKED BY
: Amit
APPROVED BY
: V. Krishnadas
_____________________
RECEIVED BY
PROJECT DEPARTMENT
Dhavan
_____________________
RECEIVED BY
INSPECTION DEPARTMENT
ENGINEERING DIVISION
PURCHASE REQUISITION
JOB NO.
PROJECT/JOB:
PAGE
CONSULTANT:
NA
MR NO.: A4-110301-DS-I-027
TITLE:
27.08.2014
DATE: 18.09.2013
PURPOSE
For Review
02
REV.
SHIPMENT REQUIRED
Please Consult Planning Dept.
DOCUMENTATIONS:
A) Following Documents in triplicate shall be submitted along with
technical offer:
a) Detailed technical literature on the offered
b)
c)
d)
e)
f)
g)
h)
i)
BYC- 110301
2
R3
OF
ENGINEERING DIVISION
PURCHASE REQUISITION
JOB NO.
PROJECT/JOB:
PAGE
CONSULTANT:
NA
MR NO.: A4-110301-DS-I-027
TITLE:
27.08.2014
DATE: 18.09.2013
PURPOSE
For Review
REV.
SHIPMENT REQUIRED
Please Consult Planning Dept.
C) Following Documents in 5 Copies shall be supplied along
Inspection:
Quality Plan with above Project information in eight (3) copies is
to be submitted by vendor before commencement of manufacture
for approval by HDO. The list of tests to be conducted on each
equipment in line with the requirement of IS or other relevant
standards.
All routine and acceptance tests as specified by the applicable
standard shall be carried out by the vendor and shall be
witnessed by HDO/NPCIL without any additional cost. Any other
tests and quality assurance requirement as defined elsewhere in
the specification shall also be complied.
Vendor should give at least 15 days prior notice for the Inspection.
Below are the some of the specific test are listed as follows:
a) Chemical Analysis & Physical Properties Check
b) Ultrasonic Test
c) Dye Penetration Test
d)
e)
f)
g)
BYC- 110301
3
R3
OF
ENGINEERING DIVISION
PURCHASE REQUISITION
JOB NO.
PROJECT/JOB:
PAGE
CONSULTANT:
NA
MR NO.: A4-110301-DS-I-027
TITLE:
27.08.2014
DATE: 18.09.2013
PURPOSE
For Review
REV.
SHIPMENT REQUIRED
Please Consult Planning Dept.
BYC- 110301
4
R3
OF
COVER SHEET
HDO
DOCUMENT NO.
REVISION
A4-110301-DS-I-027
R -3
TITLE
PROJECT
OWNER
CONTRACTOR
TOTAL
NO. OF
SHEETS
(EXCL.
COVER
SHEET)
24
PREPARED
REV.
NO.
DATE
3 27.08.14
NAME
YLS
SIGN.
CHECKED
NAME
AGD
APPROVED
SIGN.
NAME
VKD
SIGN.
TABLE OF CONTENTS
Sr. No.
DESCRIPTION
1)
SUMMARY SHEET
2)
DOCUMENT NO.
KAPP-3&4/ 63493/2017/ISS
PAGE NO.
FROM
TO
24
REMARK
SUMMARY SHEET
Sr.
No.
1)
DESCRIPTION
DOCUMENT NO.
KAPP-3&4/ 63493/2017/ISS
QTY.
REMARK
MAIN
SPARE
ANNEXURE - A
INSTRUMENT SPECIFICATION SHEET FOR
RESTRICTIONORIFICE PLATES
REVISION
For Information
For Information
REV
R2
R3
DATE
18.09.13
BY
YLS
CHKD.
AGD
APP.
VKD
27.08.2014
YLS
AGD
VKD