ZXWR RNC V3!11!10 11 Radio Parameter Reference

Operator
LOGO
ZXWR RNC Radio Parameter

Version: RNCV3.11.10.11
Document Title
Introduction
1, Manual Description
This document lists and gives information about ZTE UMTS Radio Network Parameters. It contains the description of the parameter,
such as name, unit, value, range, default value, OMC Aceess pathe and etc.
2, Structure
Sheet of Radio Parameters gives information for all parameters. Other sheets are the supplement for default value of some paramters
which default value has muti-record. There are hyperlinks to these sheet in default value colume of these parameter in radio network
paramters sheet.
The following information is presented for each parameter in Radio Parameters Sheet.
3, Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Colume Name In Radio Network
Parameters sheet
Colume Description
Managed Object
Logical Name
3GPP Name
3GPP Protocol
GUI Name
Parameter Description
Instance
Related FG
Value Range and Step
Unit
Default Value
Related Parameters
Restriction with Related Parameters
Managed object class the parameters belongs to.

Parameter Name defined in Managed Object
parameter name which is defined in 3GPP
indication which 3GPP protocol defines the parameter
OMC GUI name of the parameter
A brief introduction of the parameter
The instance for which the parameter is configured.
The Feature Guide Doc in which the parameter is introduced
The value range and step of the parameter
the value unit of the parameter
The default value, as initially set by the system, if not explicitly set at MO creation.
the related parameters
define the relationship with the related parameters
The parameter is divided into the following four category:
Fixed the parameter value can be set default and need not adjust normally;
Fixed-keep monitoringthe parameter value can be initiallly set default and adjust later according to network
TYPE
performance;
Network Planing&Optimization: the value is set according to Networ planning and optimiation;
Don't Carethe parameter need not care ;
Negotiation With CN
indication whether the parameter should cordiate with core network setting
Funtion Switch
Indication whether the paramter is a switch parameter
Configuration Rule and Adjustment SugA brief configuration rule introduction for the paramter
Default Value Configuration Reason
the reason for the default value setting
Change take effect
indicate when the new value will take effect after the parameter value is modified
Service or node impact
indicate whether the service or node is affected when the parameter valued is modified
ZTE Confidential Proprietary
Equipment Impaction Level
The equipment impaction when the parameter value is modified can be devided into four level according to the object
impacted
0indicate no impaction when the parameter is modified
1indicate imaction on the cell when the parameter is modifed
2indicate imaction on the nodeb when the parameter is modifed
3indicate imaction on the RNC when the parameter is modifed
Service Impaction Level
The service impaction when the parameter value is modified can be divided into four level
0 indicate no impaction on the active user and idle user when the paramter is modified
1 indicate impaction on the idle user but no impaction on the active user
2 indicate no impaction on the idle user and impaction on the active user. The ongoing service will interrupt but the
service can be resume in short time (60s) for example the user can reinitial the service at once;
3 indicate impaction on the idle user and the active user. The network service will interrupt for some time and will
resume later
How to Impact
OMC Access path
the detail description of the impaction after the parameter value is modified
Path for how to Access the paramter in OMC
Introduction
2/1106
Managed Object
Logical Name
3GPP Name
3GPP Reference
CMbms
ToAWE
ToAWE
TS 25.433: "UTRAN Iub

Interface NBAP
Signalling"
CMbms
ToAWS
ToAWS

Interface NBAP
Signalling"
externalUtranCell
ATimeDelay
N/A
N/A
externalUtranCell
ATimeDelayJitter N/A
N/A
rncFunction
FachToAWE
ToAWE

Interface NBAP
Signalling"
rncFunction
FachToAWS
ToAWS

Interface NBAP
Signalling"
rncFunction
PchToAWE
ToAWE

Interface NBAP
Signalling"
rncFunction
PchToAWS
ToAWS

Interface NBAP
Signalling"
rncFunction
IuUlInSeqDlvInd
N/A
CnInfo
MCC
MCC; Mobile
Country Code
TS
N/A25.423: "UTRAN Iur
interface RNSAP
signalling"
TS 25.413: "UTRAN Iu
Interface RANAP
Signalling"
TS 25.331: "RRC
Protocol Specification"
TS 23.003: "Numbering,
addressing and
identification"
TS 25.423: "UTRAN Iur

interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
CnInfo
MNC
MNC; Mobile
Network Code
externalGsmCell
AdjPhyGsmCId
N/A
externalGsmCell
Bandindicator
Band indicator
TS 25.331: "RRC
externalGsmCell
BCC
Base Station
Colour Code
(BCC)
TS 25.331: "RRC
externalGsmCell
BCCHARFCN
BCCH ARFCN
TS 25.331: "RRC
externalGsmCell
BSCId
N/A
externalGsmCell
CI
CI; Cell Identity
externalGsmCell
GeranCellInd
N/A
externalGsmCell
LAC
LAC; Location
Area Code
externalGsmCell
MaxULTxPwr
maximum
allowed UL TX
power
externalGsmCell
MCC[4]
MCC; Mobile
Country Code
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
addressing and
identification"
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
addressing and
TS
25.331: "RRC
identification"
TS
25.423:
"UTRAN Iur
Protocol
Specification"
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
addressing and
identification"
MNC; Mobile
Network Code

interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
externalGsmCell
MNC[4]
externalGsmCell
MNCBcdCodeLe
N/A
n[4]
externalGsmCell
NCC
Network Colour
Code (NCC)
TS 25.331: "RRC
externalGsmCell
PLmnNum
N/A
externalGsmCell
RAC
RAC; Routing
Area Code
externalGsmCell
SNAC[4]
SNAC; Shared
Network Area
Code
externalGsmCell
SNACNum
N/A
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
TS 25.331:
25.423: "RRC
"UTRAN Iur
interface
RNSAP
TS
23.003: "Numbering,
signalling"
addressing
TS 25.413: and
"UTRAN Iu
identification"
Interface RANAP
Signalling"
addressing and
identification"
N/A
externalUtranCell
AdjPhyCId
N/A
N/A
externalUtranCell
externalUtranCell
externalUtranCell
CId
C-Id; Cell
Identifier
Closed Loop
Mode1 Support
Indicator;
Clm1SuptInd
Diversity Mode;
TX Diversity
Mode
Continuous
Packet
CpcDtxDrxSuptIn
Connectivity
d
DTX-DRX
Support Indicator

interface RNSAP
signalling"
TS 25.331: "RRC
TS
TS 25.423:
25.401: "UTRAN
"UTRAN Iur
interface
RNSAP "
Overall Description
signalling"
Interface NBAP
Signalling"
TS 25.331: "RRC
interface RNSAP
signalling"
externalUtranCell
Continuous
Packet
CpcHslessSuptIn
Connectivity HS- interface RNSAP
d
signalling"
SCCH less
Support Indicator
externalUtranCell
DIurCmbInd
N/A
N/A
externalUtranCell
DivCtrlFld
Diversity Control
Field

interface RNSAP
signalling"
externalUtranCell
Dl64QAMSuptInd N/A
UARFCN
downlink (Nd);
DL UARFCN;
UARFCN; UTRA
Absolute Radio
Frequency
Channel Number
N/A
TS 25.331: "RRC
TS25.423
Interface NBAP
Signalling";
TS 25.401: "UTRAN
Overall Description "
interface RNSAP
signalling"
externalUtranCell
DUARFCN
externalUtranCell
EdchHarqCombC Cell Capability

ap
Container FDD
externalUtranCell
EdchSfCap
Cell Capability
Container FDD

interface RNSAP
signalling"
externalUtranCell
EdchTti2SuptInd
Cell Capability
Container FDD

interface RNSAP
signalling"
externalUtranCell
EfdpchSupInd
Cell Capability
Container FDD
TS 25.423
externalUtranCell
FDpchSuptInd
Cell Capability
Container FDD

interface RNSAP
signalling"
externalUtranCell
FlexMacdSuptInd N/A
N/A
externalUtranCell
FreqBandInd
Frequency Band
Indicator;
Frequency band
indicator;
Frequency band
indicator 2
externalUtranCell
HspaSptMeth
N/A
externalUtranCell
LAC
LAC; Location
Area Code
externalUtranCell
MaxDtxCyc
Max UE DTX
Cycle
externalUtranCell
Maximum
MaxRACHTxPwr Allowed UL Tx
Power
externalUtranCell
MCC[4]
MCC; Mobile
Country Code
externalUtranCell
MCC[4]
MCC; Mobile
Country Code
externalUtranCell
Mimo64QamSupt
N/A
Ind
externalUtranCell
MimoSuptInd
externalUtranCell
MNC[4]
externalUtranCell
PcpichPwr
N/A

interface RNSAP
signalling"
TS 25.331: "RRC
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
addressing
TS 25.423: and
"UTRAN Iur
identification"
interface RNSAP
signalling"
interface RNSAP
signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
N/A
interface RNSAP
signalling"
Interface RANAP
MNC; Mobile
Signalling"
Network Code
TS 25.331: "RRC
TS
25.423:
"UTRAN Iur
Protocol
Specification"
interface
RNSAP
TS 23.003:
"Numbering,
signalling"
addressing
and
Primary CPICH
Power; Primary identification"
Interface NBAP
CPICH Tx Power
Signalling"
TS 25.331: "RRC
externalUtranCell
PcpichPwrPre
N/A
N/A
externalUtranCell
PLmnNum
N/A
N/A
externalUtranCell
PrimScraCode
externalUtranCell
RAC
externalUtranCell
RncId
externalUtranCell
SACB
externalUtranCell
SACBPre
externalUtranCell
SACPC
externalUtranCell
SNAC[4]
externalUtranCell
SNACNum
externalUtranCell
SttdSuptInd
TS 25.331: "RRC
Primary
25.423:
"UTRAN Iur
Scrambling Code TS
interface
RNSAP
interface
signalling"RNSAP
signalling"
TS25.433
Interface RANAP
RAC; Routing
Signalling"
Area Code
TS
TS 25.331:
25.423: "RRC
"UTRAN Iur
interface
RNSAP
TS
23.003: "Numbering,
signalling"
addressing
TS 25.413: and
"UTRAN Iu
RNC-ID; RNC
identification"
Interface RANAP
Identifier
Signalling"
TS 23.003:
"Numbering,
interface
RNSAP
addressing
signalling" and
identification"
SAC; Service
Interface RANAP
Area Code
Signalling"
addressing and
identification"
N/A
N/A
interface RNSAP
signalling"
SAC; Service
Interface RANAP
Area Code
Signalling"
TS
23.003:
"Numbering,
interface
RNSAP
addressing
and
signalling"
identification"
SNAC; Shared
Network Area
Interface RANAP
Code
Signalling"
addressing and
identification"
maxnoofSNAs
interface RNSAP
signalling"
STTD Support
Indicator; STTD
Indicator; STTD
indicator

interface RNSAP
signalling"
TS25.433
TS25.331
externalUtranCell
SuptCgtDetInd
N/A
N/A
externalUtranCell
TutranGpsSptInd N/A
N/A

interface RNSAP
signalling"
TS 25.331: "RRC
Interface
NBAP
TS 25.423:
"UTRAN Iur
Signalling"
interface RNSAP
URA-ID; URA ID; signalling"
URA Identity
TS 25.331: "RRC
TS25.401
Tx Diversity
Indicator; TX
Diversity
Indicator;
Transmit
Diversity
Indicator
externalUtranCell
TxDivInd
externalUtranCell
URA[4]
externalUtranCell
URANum
externalUtranCell
UUARFCN
gsmRelation
CId
gsmRelation
GsmShareCover N/A
N/A
gsmRelation
NPhyGsmCId
N/A
N/A
iuCnst
TigOR
TigOR
Interface RANAP
Signalling"
iuCnst
TinTR
TinTR
Interface RANAP
Signalling"
TS 25.331: "RRC
TS 25.331: "RRC
UARFCN uplink
(Nu); UL
TS25.423
UARFCN;
UARFCN; UTRA
Interface NBAP
Absolute Radio
Signalling";
Frequency
TS
TS 25.423:
25.401: "UTRAN
"UTRAN Iur
Channel Number interface RNSAP
signalling"
C-Id; Cell
TS 25.331: "RRC
Identifier
TS 25.401: "UTRAN
maxURA
nodeB
AuditTimer
N/A
N/A
nodeB
DivContrlField
Diversity Control
Field

Interface NBAP
Signalling"
nodeB
NodebNo
N/A
N/A
nodeB
NodeBType
N/A
N/A
nodeB
SuptCgtDetInd
N/A
N/A
nodeB
TimeDelay
N/A
N/A
nodeB
TimeDelayJitter
N/A
N/A
rncLocRnc
FDDFreqRngNu
m
maxNumFDDFre TS 25.331: "RRC

qs
rncLocRnc
GsmBARangeNu maxNumGSMFre TS 25.331: "RRC

m
qRanges
rncLocRnc
GsmLRange[32]
GSM Lower
Range
(UARFCN)
TS 25.331: "RRC
rncLocRnc
GSM Upper
GsmURange[32] Range
(UARFCN)
TS 25.331: "RRC
rncLocRnc
IntegrityAlg
Integrity
protection
algorithm;
Integrity
Protection
Algorithm
rncLocRnc
Luarfcn[8]
UARFCN (Nlow)
TS 25.331: "RRC
rncFunction
N308
N308
TS 25.331: "RRC
rncFunction
NReTran
N/A
N/A
rncLocRnc
Uuarfcn[8]
UARFCN
(Nupper)
rncLcSnac
LAC
LAC; Location
Area Code
rncLcSnac
MCC
MCC; Mobile
Country Code
rncLcSnac
MNC
MNC; Mobile
Network Code
rncLcSnac
SNAC
SNAC; Shared
Network Area
Code
rncPnSnac
ExtInfo[10]
N/A
TS 25.331: "RRC
TS
25.423:
"UTRAN Iur
Protocol
Specification"
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
TS 25.331:
25.423: "RRC
"UTRAN Iur
Protocol
interface Specification"
RNSAP
TS
23.003: "Numbering,
signalling"
addressing
TS 25.413: and
"UTRAN Iu
identification"
Interface RANAP
Signalling"
addressing and
identification"
N/A
rncPnSnac
ExtInfoDgtNum
N/A
N/A
TS 25.331: "RRC
Interface RANAP
Signalling"
rncPnSnac
MCC
MCC; Mobile
Country Code
rncPnSnac
MNC
MNC; Mobile
Network Code
rncPnSnac
SMCC
MCC; Mobile
Country Code
rncPnSnac
SMNC
MNC; Mobile
Network Code
utranCell
CellScen
N/A
utranCell
Clm1SuptInd
Closed Loop
Mode1 Support
Indicator;
Diversity Mode;
TX Diversity
Mode
utranCell
CommonPlmnInd
N/A
[4]
utranCell
utranCell
utranCell
utranCell
CsACBarredOmc
r[DBS_RR_MAX_
NUM_SHARED_ N/A
PLMN_PER_CEL
L]
UARFCN
downlink (Nd);
DL UARFCN;
DUARFCN
UARFCN; UTRA
Absolute Radio
Frequency
Channel Number

interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
interface RNSAP
signalling"
Interface NBAP
Signalling"
TS 25.331: "RRC
N/A
N/A
TS 25.331: "RRC
TS25.423
Interface NBAP
Signalling";
TS 25.401: "UTRAN
FDpchSuptInd
N/A
N/A
FreqBandInd
Frequency Band
Indicator;
Frequency band
indicator;
Frequency band
indicator 2

interface RNSAP
signalling"
TS 25.331: "RRC
utranCell
HspaSptMeth
N/A
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS 25.331: "RRC
TS
TS 23.003:
25.433: "Numbering,
"UTRAN Iub
addressing
and
Interface NBAP
identification"
Signalling"
TS 25.401: "UTRAN
utranCell
LAC
LAC; Location
Area Code
utranCell
LCId
Local Cell ID;

Local Cell
Identifier
utranCell
MAXDlTxPwr
Maximum
Transmission
Power

Interface NBAP
Signalling"
utranCell
MbmsSuptInd
N/A
utranCell
MCC[4]
MCC; Mobile
Country Code
utranCell
MNC[4]
MNC; Mobile
Network Code
utranCell
Module
N/A
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
utranCell
NodebNo
N/A
N/A
utranCell
NumInSyncInd

N_INSYNC_IND Interface NBAP
Signalling"
utranCell
NumOutSyncInd

N_OUTSYNC_IN
Interface NBAP
D
Signalling"
utranCell
PagingSendTime
N/A
s
N/A
utranCell
PccpchInfSib6Pre N/A
N/A
utranCell
PLmnNum
N/A
N/A
utranCell
PrachSib6Pre
N/A
N/A
utranCell
PrimScraCode
utranCell
RAC
utranCell
RncId
utranCell
SACB
utranCell
SACBPre
utranCell
SACPC
utranCell
SectorId
TS 25.331: "RRC
Primary
25.423:
"UTRAN Iur
Scrambling Code TS
interface
RNSAP
interface
signalling"RNSAP
signalling"
TS25.433
Interface RANAP
RAC; Routing
Signalling"
Area Code
TS
TS 25.331:
25.423: "RRC
"UTRAN Iur
interface
RNSAP
TS
23.003: "Numbering,
signalling"
addressing
TS 25.413: and
"UTRAN Iu
RNC-ID; RNC
identification"
Interface RANAP
Identifier
Signalling"
TS 23.003:
"Numbering,
interface
RNSAP
addressing
signalling" and
identification"
SAC; Service
Interface RANAP
Area Code
Signalling"
addressing and
identification"
N/A
N/A
interface RNSAP
signalling"
SAC; Service
Interface RANAP
Area Code
Signalling"
addressing and
identification"
N/A
N/A
utranCell
SuptMulUsDetInd N/A
N/A
utranCell
SIB12Ind
SIB12 Indicator
TS 25.331: "RRC
utranCell
SIB4Ind
SIB4 Indicator
TS 25.331: "RRC
utranCell
SIB6Ind
SIB6 Indicator
TS 25.331: "RRC
utranCell
SttdSuptInd
STTD Support
Indicator; STTD
Indicator; STTD
indicator

interface RNSAP
signalling"
TS25.433
TS25.331
utranCell
TCell
T Cell

Interface NBAP
Signalling"
utranCell

interface RNSAP
URA-ID; URA ID; signalling"
URA[MAX_URA]
URA Identity
TS 25.331: "RRC
TS25.401
utranCell
URANum
utranCell
UUARFCN
utranCell
AccessPercent[4] N/A
N/A
utranCell
PsACBarredOmc
r[DBS_RR_MAX_
NUM_SHARED_ N/A
PLMN_PER_CEL
L]
N/A
TS 25.331: "RRC
TS 25.331: "RRC
UARFCN uplink
(Nu); UL
TS25.423
UARFCN;
UARFCN; UTRA
Interface NBAP
Absolute Radio
Signalling";
Frequency
TS 25.401: "UTRAN
Channel Number
maxURA
C-Id; Cell
Identifier

interface RNSAP
signalling"
TS 25.331: "RRC
TS 25.401: "UTRAN
utranRelation
CId
utranRelation
NCToSelfPhyRnc N/A
N/A
utranRelation
NPhyCId
N/A
N/A
utranRelation
ShareCover
N/A
N/A
QosIndex
ProfileIndex
N/A
N/A
QosIndex
ANI
N/A
N/A
QosIndex
TbTypeIndex[]
N/A
N/A
QosIndex
ResBwdIndex[]
N/A
N/A
QosProfile
ProfileIndex
N/A
N/A
QosProfile
TrafficCategory
N/A
N/A
QosProfile
TbType
N/A
N/A
QosProfile
TbTypePara1
N/A
N/A
QosProfile
TbTypePara2
N/A
N/A
QosProfile
TbTypePara3
N/A
N/A
QosProfile
TbTypePara4
N/A
N/A
QosProfile
TbTypePara5
N/A
N/A
QosProfile
TbTypePara6
N/A
N/A
QosProfile
IpDscp
N/A
N/A
QosProfile
IBUlResBwd
N/A
N/A
QosProfile
IBDlResBwd
N/A
N/A
TbType
MCC
N/A
N/A
TbType
MNC
N/A
N/A
TbType
TbTypeIndex
N/A
N/A
TbType
BPSeg
N/A
N/A
TbType
BearerType
N/A
N/A
TbType
TbType
N/A
N/A
TbType
IpDscp
N/A
N/A
ResBwd
ResBwdIndex
N/A
N/A
ResBwd
BPSeg
N/A
N/A
ResBwd
DchUlResBwd
N/A
N/A
ResBwd
DchDlResBwd
N/A
N/A
ResBwd
HspaUlResBwd
N/A
N/A
ResBwd
HspaDlResBwd
N/A
N/A
ResBwd
MCC
N/A
N/A
ResBwd
MNC
N/A
N/A
rncFunction
SharedNetMode
N/A
N/A
rncLocRnc
Tnnsf
TNNSF
rncPnSnac
SNAC
SNAC; Shared
Network Area
Code
Mbms
MschSptSwitch
N/A
Mich
CId
N/A
Pich
SttdInd
STTD indicator;
STTD Indicator
Prach
PrachType
N/A
Chspa
DediComEAGCH
N/A
Swi
N/A
Hspa
RncDcMimoSupI
N/A
nd
N/A
Interface RANAP
Signalling"
interface RNSAP
signalling"
Interface RANAP
Signalling"
addressing and
identification"
N/A
N/A
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.211: "Physical
channels and mapping
of transport channels
onto physical channels
(FDD)"
N/A
utranCell
CellDcMimoSupI
N/A
nd
N/A
externalUtranCell
DCelDcMimoSupI
N/A
nd
N/A
rncFunction
UpdaSIB3CelNu
m
N/A
N/A
rncFunction
UpdSIB3Celnt
N/A
N/A
utranCell
CelAvaSubCha
N/A
N/A
Aich
AichTranTime
AICH
transmission
timing; AICH
Transmission
Timing
TS 25.331: "RRC
Interface NBAP
Signalling"
Aich
CId
C-ID

Interface NBAP
Signalling"
Aich
CPCId
Common
Physical Channel Interface NBAP
ID
Signalling"
Aich
PrachCPCId
Common
ID
Signalling"
Aich
SttdInd
STTD indicator;
STTD Indicator
TS 25.331: "RRC
Interface NBAP
Signalling"
Chspa
CodeUptHyA
N/A
N/A
Chspa
DpchCodeHy
N/A
N/A
Chspa
HspdschBitRate
N/A
N/A
Chspa
HsShareInd
N/A
N/A
Chspa
MaxNumofHspds
N/A
ch
N/A
Chspa
MinNumofHspdsc
N/A
h
N/A
Chspa
NumofEagch
N/A
N/A
Chspa
NumofErgHich
N/A
N/A
Chspa
NumofHspdsch
N/A
N/A
Chspa
NumofHsscch
N/A
N/A
Chspa
IurCdReAssDrop N/A
N/A
CMbms
MbmsSccpchRes
N/A
Num
N/A
Hspa
CodeReAssInd
N/A
N/A
Hspa
CodeReAssPrd
N/A
N/A
rncFunction
CodeUptPrd
N/A
N/A
rncFunction
CodeUptPrdUnit
N/A
N/A
Hspa
Rnc64QAMInd
N/A
N/A
Hspa
RncEfdpchSupIn
N/A
d
N/A
Hspa
RncEnL2Ind
N/A
N/A
Hspa
RncFdpchSupInd N/A
N/A
Hspa
RncMIMOInd
N/A
N/A
Hspa
RncMimo64QamI
N/A
nd
N/A
Mbms
BFreqConvSwch N/A
N/A
Mbms
SFreqConvSwch N/A
N/A
MbmsSa
CellNum
N/A
N/A
MbmsSa
CId[DBS_RR_MA
X_NUM_CELL_P
N/A
ER_MBMSSAC_
PER_FREQLEV]
N/A
MbmsSa
DUARFCN
N/A
N/A
MbmsSa
FreqBandInd
N/A
N/A
MbmsSa
FreqPLInd
N/A
N/A
MbmsSa
MbmsSac
N/A
N/A
MbmsSa
MCC
MCC
TS 25.331: "RRC
MbmsSa
MNC
MNC
TS 25.331: "RRC
Mich
CPCId
Common
ID
Signalling"
Mich
TS 25.331: "RRC
Number of NI per Protocol Specification"
NiNumPerFrame frame; MICH
Mode
Interface NBAP
Signalling"
Mich
SttdInd
STTD indicator;
STTD Indicator
TS 25.331: "RRC
Interface NBAP
Signalling"
nodeB
HsSharMethod
N/A
N/A
nodeB
HsSharUptPrd
N/A
N/A
PccpchSttdInd
TX Diversity
indicator; STTD
Indicator
utranCell
PcpichTxDivInd
TX Diversity
Indicator;
Transmit
Diversity
Indicator
Prach
AC2ASCMap[MA
AC-to-ASC
X_AC_ASC_MAP
mapping
PING]
TS 25.331: "RRC
Prach
Available
AsigStIdx[DBS_R
signature End
R_MAX_ASC]
Index
TS 25.331: "RRC
Prach
Available
AsigEndIdx[DBS_
signature Start
RR_MAX_ASC]
Index
TS 25.331: "RRC
Prach
AsubChNum[DB
S_RR_MAX_AS
C]
Prach
Available Sub
Channel Number;
AvailSubChanNu
RACH Sub
m
Channel
Numbers
TS 25.331: "RRC
Interface NBAP
Signalling"
Prach
CId

Interface NBAP
Signalling"
utranCell
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.331: "RRC
Interface NBAP
Signalling"
Assigned SubTS 25.331: "RRC

Channel Number Protocol Specification"
C-ID
Prach
CPCId
Common
ID
Signalling"
Prach
DynPstLevelInit
Dynamic
TS 25.331: "RRC
persistence level Protocol Specification"
Prach
MaxPreamRetran Preamble
s
Retrans Max
TS 25.331: "RRC
Prach
Mmax
Preamble
Retrans Max
TS 25.331: "RRC
TS 25.321: "Medium
Access Control (MAC)
protocol specification"
Prach
PermitMaxASC
N/A
TS 25.331: "RRC
Prach
Preamble
scrambling code
PreamScraCode number;
Scrambling Code
Number
Prach
PreamThs
Preamble
Threshold

Interface NBAP
Signalling"
Prach
PRStep
Power Ramp
Step
TS 25.331: "RRC
Prach
PSF[DBS_RR_M Persistence
AX_ASC_PSF]
scaling factors
TS 25.331: "RRC
Prach
PsfNum
N/A
TS 25.331: "RRC
Prach
Sib5OrSib6
N/A
TS 25.331: "RRC
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.331: "RRC
Interface NBAP
Signalling"
Prach
Signature
Available
Signature ;
Preamble
Signatures
utranCell
SchTstdInd
TSTD Indicator

Interface NBAP
Signalling"
rcpSc
Module
N/A
N/A
rcpSc
RcpScrEndId
N/A
N/A
rcpSc
RcpScrStartId
N/A
N/A
rncLocRnc
AmrNbMode0Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode1Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode2Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode3Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode4Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode5Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode6Use
N/A
Tag
N/A
rncLocRnc
AmrNbMode7Use
N/A
Tag
N/A
rncLocRnc
AmrRncAdjust
N/A
N/A
rncLocRnc
AmrWbMode0Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode1Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode2Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode3Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode4Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode5Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode6Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode7Us
N/A
eTag
N/A
rncLocRnc
AmrWbMode8Us
N/A
eTag
N/A
Scpich
CId

Interface NBAP
Signalling"
Scpich
CPCId
Scpich
TxDivInd
utranCell
BarInterval
N/A
N/A
utranCell
CellBarAcNum
N/A
N/A
utranCell
CellBarAcSwh
N/A
N/A
utranCell
CellBarPollingSw
N/A
h
N/A
utranCell
CSBarAcNum[DB
S_RR_MAX_NU
N/A
M_SHARED_PL
MN_PER_CELL]
N/A
utranCell
CSDsarPollingSw
N/A
h
N/A
utranCell
CSDsarSwh
N/A
C-ID
Common
ID
Signalling"
Interface NBAP
Signalling"
Transmit
Diversity
Indicator
of transport channels
onto physical channels
(FDD)"
N/A
utranCell
EfdpchSupInd
N/A
N/A
utranCell
MimoInd
N/A
N/A
utranCell
MimoPilotMode
N/A
N/A
utranCell
MimoSuptInd
N/A
N/A
utranCell
OCNSCode[DBS
_RR_MAX_NUM N/A
_OCNS_CODE]
N/A
utranCell
OCNSCodeNumb
N/A
er
N/A
utranCell
utranCell
PagingLocaBarS
wh
[DBS_RR_MAX_
N/A
NUM_SHARED_
PLMN_PER_CEL
L]
PSBarAcNum[DB
S_RR_MAX_NU
N/A
M_SHARED_PL
MN_PER_CELL]
N/A
N/A
utranCell
PSDsarPollingSw
h[DBS_RR_MAX
_NUM_SHARED N/A
_PLMN_PER_CE
LL]
N/A
utranCell
PSDsarSwh
N/A
N/A
utranCell
ScpichSupInd
N/A
N/A
T_RLFAILURE

Interface NBAP
Signalling"
utranCell
TRlFailure
utranCell
CelMimo64QamI
N/A
nd
N/A
utranCell
SttdMimoBindInd N/A
N/A
utranCell
VamSupInd
N/A
N/A
CUeInt
CId
C-ID

Interface NBAP
Signalling"
CUeInt
EvtMeasRTT1
N/A
N/A
CUeInt
EvtMeasRTT2
N/A
N/A
CUeInt
EvtMeasTP1
N/A
N/A
CUeInt
HoEvtMeasTP
N/A
N/A
CUeInt
PrdMeasRTT
N/A
N/A
CUeInt
PsEvtMeasTP1
N/A
N/A
DedMeasType
Dedicated
Measurement
Type
NbDed
EvtAbcdefTime
Measurement
Hysteresis Time;
Interface NBAP
Measurement
Signalling"
Change Time
NbDed
EvtEfSirEThrd2
Measurement
Threshold 2

Interface NBAP
Signalling"
NbDed
MeasFilterCoeff
Measurement
Filter Coefficient

Interface NBAP
Signalling"
NbDed
NbDMCfgNote
N/A
N/A
NbDed
RptPrd

Report Periodicity
Interface NBAP
Value
Signalling"
NbDed
RptPrdUnit

CHOICE Report
Interface NBAP
Periodicity Scale
Signalling"
NbDed
RptType
Report
Characteristics

Interface NBAP
Signalling"
UeInt
FilterCoeff
Filter coefficient
TS 25.331: "RRC
UeInt
MeasEvtNum
N/A
TS 25.331: "RRC
UeInt
MeasQuantity
Measurement
quantity
TS 25.331: "RRC
NbDed

Interface NBAP
Signalling"
UeInt
MeasRptTrMod
Measurement
Report Transfer
Mode
TS 25.331: "RRC
UeInt
PrdRptAmount
Amount of
reporting
TS 25.331: "RRC
UeInt
PrdRptInterval
Reporting interval
TS 25.331: "RRC
UeInt
RptCrt
Periodical
Reporting / Event TS 25.331: "RRC
Trigger Reporting Protocol Specification"
Mode
UeInt
RptTxPwrInd
UE Transmitted
Power
UeInt
RptTxRxTmDiffIn UE Rx-Tx time

d
difference
TS 25.331: "RRC
UeInt
TrigTime[DBS_R
R_MAX_UE_INT
Time-to-trigger
ER_MEAS_EVE
NT]
TS 25.331: "RRC
UeInt
TxPowerThres[D
UE Transmitted
BS_RR_MAX_U
Power Tx power
E_INTER_MEAS
threshold
_EVENT]
TS 25.331: "RRC
UeInt
TxRxTDThres[DB
UE Rx-Tx time
S_RR_MAX_UE_
difference
INTER_MEAS_E
threshold
VENT]
TS 25.331: "RRC
UeInt
UeIntMCfgNo
N/A
N/A
UeInt
UeIntMCfgNote
N/A
N/A
TS 25.331: "RRC
Scpich
MimoScpichPwr
N/A
N/A
externalUtranCell
AdjPreCodeResI
N/A
nd
N/A
utranCell
CellType
N/A
N/A
CHspa
HsNBAssInd
N/A
N/A
CnInfo
ATTIndCs
ATT
TS 24.008: "Mobile radio

interface Layer 3
specification; Core
network protocols; Stage
3"
CnInfo
CnDomain
N/A
N/A
Kcs
CN domain
specific DRX
cycle length
coefficient
TS 25.331: "RRC
Kps
CN domain
specific DRX
cycle length
coefficient
TS 25.331: "RRC
CnInfo
CnInfo
CnInfo
NMOPs
NMO
CnInfo
T3212Cs
T3212
rncFunction
TRbRecfgCmpDt
N/A
oF

interface Layer 3
specification; Core
3"
interface Layer 3
specification; Core
3"
N/A
rncLocRnc
EncryAlg
Encryption
Algorithm
Interface RANAP
Signalling"
utranCell
Twait
Wait time
TS 25.331: "RRC
Chspa
CId
C-Id; Cell
Identifier

interface RNSAP
signalling"
TS 25.331: "RRC
TS 25.401: "UTRAN
externalUtranCell
ARESPARA1
N/A
N/A
externalUtranCell
ARESPARA10
N/A
N/A
externalUtranCell
ARESPARA11
N/A
N/A
externalUtranCell
ARESPARA12
N/A
N/A
externalUtranCell
ARESPARA13
N/A
N/A
externalUtranCell
ARESPARA14
N/A
N/A
externalUtranCell
ARESPARA15
N/A
N/A
externalUtranCell
ARESPARA16
N/A
N/A
externalUtranCell
ARESPARA17
N/A
N/A
externalUtranCell
ARESPARA18
N/A
N/A
externalUtranCell
ARESPARA19
N/A
N/A
externalUtranCell
ARESPARA2
N/A
N/A
externalUtranCell
ARESPARA20
N/A
N/A
externalUtranCell
ARESPARA3
N/A
N/A
externalUtranCell
ARESPARA4
N/A
N/A
externalUtranCell
ARESPARA5
N/A
N/A
externalUtranCell
ARESPARA6
N/A
N/A
externalUtranCell
ARESPARA7
N/A
N/A
externalUtranCell
ARESPARA8
N/A
N/A
externalUtranCell
ARESPARA9
N/A
N/A
rncBRnc
FastRecfgSptInd N/A
N/A
rncBRnc
GRESPARA1
N/A
N/A
rncBRnc
GRESPARA10
N/A
N/A
rncBRnc
GRESPARA11
N/A
N/A
rncBRnc
GRESPARA12
N/A
N/A
rncBRnc
GRESPARA13
N/A
N/A
rncBRnc
GRESPARA14
N/A
N/A
rncBRnc
GRESPARA15
N/A
N/A
rncBRnc
GRESPARA16
N/A
N/A
rncBRnc
GRESPARA17
N/A
N/A
rncBRnc
GRESPARA18
N/A
N/A
rncBRnc
GRESPARA19
N/A
N/A
rncBRnc
GRESPARA2
N/A
N/A
rncBRnc
GRESPARA20
N/A
N/A
rncBRnc
GRESPARA3
N/A
N/A
rncBRnc
GRESPARA4
N/A
N/A
rncBRnc
GRESPARA5
N/A
N/A
rncBRnc
GRESPARA6
N/A
N/A
rncBRnc
GRESPARA7
N/A
N/A
rncBRnc
GRESPARA8
N/A
N/A
rncBRnc
GRESPARA9
N/A
N/A

interface RNSAP
signalling"
TS 25.331: "RRC
TS 25.423:
25.401: "UTRAN
"UTRAN Iur
TS
Overall
interfaceDescription
RNSAP "
signalling"
TS 25.331: "RRC
TS 25.423:
25.401: "UTRAN
"UTRAN Iur
TS
Overall
interfaceDescription
RNSAP "
signalling"
TS 25.331: "RRC
TS 25.401: "UTRAN
Sccpch
CId
C-Id; Cell
Identifier
SysMC
CId
C-Id; Cell
Identifier
utranCell
CId
C-Id; Cell
Identifier
utranCell
CpcSuptInd
N/A
N/A
utranCell
CRESPARA1
N/A
N/A
utranCell
CRESPARA10
N/A
N/A
utranCell
CRESPARA11
N/A
N/A
utranCell
CRESPARA12
N/A
N/A
utranCell
CRESPARA13
N/A
N/A
utranCell
CRESPARA14
N/A
N/A
utranCell
CRESPARA15
N/A
N/A
utranCell
CRESPARA16
N/A
N/A
utranCell
CRESPARA17
N/A
N/A
utranCell
CRESPARA18
N/A
N/A
utranCell
CRESPARA19
N/A
N/A
utranCell
CRESPARA2
N/A
N/A
utranCell
CRESPARA20
N/A
N/A
utranCell
CRESPARA3
N/A
N/A
utranCell
CRESPARA4
N/A
N/A
utranCell
CRESPARA5
N/A
N/A
utranCell
CRESPARA6
N/A
N/A
utranCell
CRESPARA7
N/A
N/A
utranCell
CRESPARA8
N/A
N/A
utranCell
CRESPARA9
N/A
N/A
N/A
URA
N/A
N/A
N/A
SelfPhyRncCInd
N/A
N/A
N/A
PhyCId
N/A
N/A
nodeB
NodebNo
N/A
N/A
rncFunction
RrcSetupRetraNu
N/A
m
N/A
rncFunction
TRrcSetupRetran N/A
N/A
rncFunction
Tiureldelay
N/A
QosSeg
MCC
MCC; Mobile
Country Code
SchPri
MCC
MCC; Mobile
Country Code
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
Protocol
Specification"
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
AppPri
MCC
MCC; Mobile
Country Code
ResBwd
MCC
MCC; Mobile
Country Code
BPriAc
MCC
MCC; Mobile
Country Code
rncLocRnc
MCC
MCC; Mobile
Country Code
rncBRnc
MCC
MCC; Mobile
Country Code
iuCnst
MCC
MCC; Mobile
Country Code
Drbc
MCC
MCC; Mobile
Country Code
QosSeg
MNC
MNC; Mobile
Network Code
SchPri
MNC
MNC; Mobile
Network Code
AppPri
MNC
MNC; Mobile
Network Code
ResBwd
MNC
MNC; Mobile
Network Code

interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
Protocol
Specification"
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
Protocol
Specification"
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
Protocol
Specification"
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"

interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS
TS 25.331:
25.423: "RRC
"UTRAN Iur
interface
RNSAP
TS
23.003: "Numbering,
signalling"
addressing
TS 25.413: and
"UTRAN Iu
identification"
Interface
RANAP
Signalling"
interface RNSAP
signalling"
addressing
TS 25.413: and
"UTRAN Iu
identification"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
BPriAc
MNC
MNC; Mobile
Network Code
rncLocRnc
MNC
MNC; Mobile
Network Code
rncBRnc
MNC
MNC; Mobile
Network Code
iuCnst
MNC
MNC; Mobile
Network Code
Drbc
MNC
MNC; Mobile
Network Code
rncFunction
RncId
RNC-ID; RNC
Identifier
EUtranCell
MCC
MCC; Mobile
Country Code
EUtranCell
MNC
MNC; Mobile
Network Code
EUtranCell
MNCBcdCodeLe
N/A
n
EUtranCell
ENodeBType
N/A
N/A
EUtranCell
ENodeBId
N/A
N/A
EUtranCell
TAC
N/A
N/A
EUtranNbr
CId
N/A
N/A
EUtranNbr
NENodeBId
N/A
N/A
EUtranNbr
NEutranCId
N/A
N/A
gsmRelation
NCToSelfPhyRnc N/A
N/A
EUtranCell
EutranCId
N/A
N/A
EUtranCell
PhyEutranCId
N/A
N/A
MulMdCelLd
CId
CID

Interface NBAP
Signalling"
utranCell
radioCapacity
N/A
N/A
externalGsmCell
RACC
N/A
N/A
QosIndex
PLmnNum
N/A
N/A
QosIndex
MCC
N/A
N/A
QosIndex
MNC
N/A
N/A
rncFunction
TWaitRlRestore
N/A
N/A
rncFunction
TWaitCelUpUuEx
N/A
p
N/A
rncFunction
TWaitActSetUpC
N/A
mp
N/A
rncFunction
WaitRbCompTim
N/A
er
N/A
rncFunction
TRrcConSetupEx
N/A
p
N/A
rncFunction
CelChgFastCfgIn
N/A
d
N/A
rncFunction
TWaitContextReq N/A
N/A
rncFunction
TWaitDataFwd
N/A
N/A
rncFunction
TWaitRelCmd
N/A
N/A
rncFunction
TResndMeaCtrlR
N/A
el
N/A
rncFunction
PlmnSelectMetho
N/A
d
N/A
CfnOffset
SigType
N/A
N/A
CfnOffset
FstRecfgInd
N/A
N/A
CfnOffset
RetranRate
N/A
N/A
CfnOffset
UuPktLenInd[13] N/A
N/A
CfnOffset
CfnOffset[13]
N/A
N/A
rncFunction
CsNriBitNum
N/A
N/A
rncFunction
PsNriBitNum
N/A
N/A
rncLocRnc
CsNullNri
N/A
N/A
rncLocRnc
PsNullNri
N/A
N/A
CIntra
EvtMeasDctEcNo N/A
N/A
CIntra
EvtMeasDctRSC
N/A
P
N/A
CIntra
EvtMeasEcNo
N/A
N/A
CIntra
EvtMeasRSCP
N/A
N/A
CIntra
PrdMeasEcNo
N/A
N/A
CIntra
PrdMeasRSCP
N/A
N/A
rncFunction
HsdpaCmAssoM
N/A
ode
N/A
rncFunction
HsupaCmAssoM
N/A
ode
N/A
rncFunction
T1d
N/A
Intra
EvtRptAmount[M
Amount of
AX_INTRA_MEA
reporting
S_EVENT]
Intra
EvtRptInterval[M
TS 25.331: "RRC
AX_INTRA_MEA Reporting interval
S_EVENT]
N/A
TS 25.331: "RRC
FilterCoeff
Intra
Hysteresis[MAX_I
NTRA_MEAS_E Hysteresis
VENT]
TS 25.331: "RRC
Intra
IntraMeasCfgNo
N/A
N/A
Intra
IntraMeasCfgNot
N/A
e
N/A
Intra
MeaEvtId[MAX_I
Intra-frequency
NTRA_MEAS_E
event identity
VENT]
TS 25.331: "RRC
Intra
MeasEvtNum
N/A
N/A
Intra
MeasQuantity
Measurement
quantity
TS 25.331: "RRC
Intra
PrdRptAmount
Amount of
reporting
TS 25.331: "RRC
Intra
PrdRptInterval
Reporting interval
TS 25.331: "RRC
Intra
RplcActThr[MAX_ Replacement
INTRA_MEAS_E activation
VENT]
threshold
Intra
RptCrt
Filter coefficient
TS 25.331: "RRC
Intra
TS 25.331: "RRC
Periodical
Mode
Intra
RptDeactThr[MA Reporting
X_INTRA_MEAS deactivation
_EVENT]
threshold
Intra
RptRange
[MAX_INTRA_M
EAS_EVENT]
Intra
ThreshUsedFreq[
Threshold used
MAX_INTRA_ME
frequency
AS_EVENT]
TS 25.331: "RRC
Intra
TrigTime[MAX_IN
TRA_MEAS_EVE Time to trigger
NT]
TS 25.331: "RRC
Intra
W[MAX_INTRA_
W
MEAS_EVENT]
TS 25.331: "RRC
TS 25.331: "RRC
Reporting Range TS 25.331: "RRC

Constant
C-Id; Cell
Identifier
plBal
CId
plBal
CsHo4MulRabSw
N/A
ch

interface RNSAP
signalling"
TS 25.331: "RRC
TS 25.401: "UTRAN
N/A
PriSel
CID
C-Id; Cell
Identifier

interface RNSAP
signalling"
TS 25.331: "RRC
TS 25.401: "UTRAN
SysMC
IntraMeasCfgNo
N/A
N/A
utranCell
LoadBalanceSce
N/A
ne
N/A
iuCnst
Nrepeatresrst
N/A
N/A
iuCnst
Nrepeatrst
N/A
N/A
rncFunction
Tcnquery
N/A
N/A
externalUtranCell
SndSvrCelID
N/A
N/A
externalUtranCell
IurDcHsdsSuptIn
N/A
d
N/A
nodeB
nodeB
nodeB
MCC4RANSharin
g
[DBS_RR_MAX_
N/A
NUM_SHARED_
PLMN_PER_CEL
L]
MinCEPercent
[DBS_RR_MAX_
NUM_SHARED_ N/A
PLMN_PER_CEL
L]
MNC4RANSharin
g
[DBS_RR_MAX_
N/A
NUM_SHARED_
PLMN_PER_CEL
L]
nodeB
PlmnNum
N/A
BasPri
MCC
MCC; Mobile
Country Code
BasPri
MNC
MNC; Mobile
Network Code
BasPri
ARPSeg
N/A
N/A
N/A
N/A
N/A
interface RNSAP
signalling"
Interface RANAP
Signalling"
TS
25.331:
"RRC
interface
RNSAP
Protocol
Specification"
signalling"
TS
TS 23.003:
25.413: "Numbering,
"UTRAN Iu
addressing
and
Interface RANAP
identification"
Signalling"
TS 25.331: "RRC
addressing and
identification"
N/A
BasPri
BasicPrio
N/A
N/A
BasPri
TrafficClass
N/A
N/A
Hspa
RlcSizeSuptType N/A
N/A
rncFunction

interface RNSAP
Maximum MAC-d
NonCMaxPduSiz
signalling"
PDU Size
e
Extended
Interface NBAP
Signalling"
AppPri
MCC
N/A
N/A
AppPri
MNC
N/A
N/A
AppPri
AppPri
N/A
N/A
AppPri
AppPriIndex
N/A
N/A
AppPri
BearerType
N/A
N/A
AppPri
BPSeg
N/A
N/A
AppPri
Direction
N/A
N/A
AppPri
RateSeg
N/A
N/A
CelSel
QqualminOffset
N/A
TS 25.331: "RRC
CelSel
QqulmnOffstPre
N/A
N/A
CelSel
QrxlevminOffset
N/A
TS 25.331: "RRC
CelSel
QrxlvmnOffstPre
N/A
N/A
Chspa
EdchTrafLimit
N/A
N/A
Chspa
HsdschTrafLimit
N/A
N/A
Chspa
MaxRTWP
Maximum Target
Received Total
Interface NBAP
Wide Band
Signalling"
Power
CMbms
MbmsThrputThre
N/A
sh
N/A
CMbms
MbmsTrafLimit
N/A
N/A
Efach
ChTypeInd[DBS_
RR_MAX_NUM_ N/A
PRIOR_QUEUE]
N/A
Efach
DiscardTimer[DB
S_RR_MAX_NU
Discard Timer
M_PRIOR_QUE
UE]
25.433
Efach
DlEFACHT1[DBS
_RR_MAX_NUM
T1
_PRIOR_QUEUE
]
25.433
Efach
DLEFACHTreset[
DBS_RR_MAX_
Treset
NUM_PRIOR_Q
UEUE]
25.433
Efach
DTCfgInd[DBS_R
R_MAX_NUM_P N/A
RIOR_QUEUE]
N/A
Efach
Cid
N/A
Efach
EFACHHSPDSC HS-PDSCH
HPwr
Power
Efach
EFACHHSSCCH
HS-SCCH Power 25.331 25.433
Pwr
Efach
MACehsQID[DBS
_RR_MAX_NUM MAC-ehs queue
_PRIOR_QUEUE identity
]
Efach
MACehsWinSize[
DBS_RR_MAX_ MAC ehs window
25.331 25.433
NUM_PRIOR_Q size
UEUE]
Efach
MaxMacPDUSize
[DBS_RR_MAX_ Maximum MAC-c
25.331 25.433
NUM_PRIOR_Q PDU Size
UEUE]
Efach
SPI[DBS_RR_M
Scheduling
AX_NUM_PRIOR
Priority Indicator
_QUEUE]
N/A
25.331 25.433
25.331 25.433
25.433
QosSeg
MCC
N/A
N/A
QosSeg
MNC
N/A
N/A
QosSeg
ARPSegNum
N/A
N/A
QosSeg
ARPThresh
[DBS_RR_MAX_
N/A
ARP_SEGMENT1]
N/A
QosSeg
BPSegNum
N/A
N/A
QosSeg
BPThresh
[DBS_RR_MAX_ N/A
BP_SEGMENT-1]
N/A
QosSeg
DlNormBitRate[D
BS_RR_MAX_BP N/A
]
N/A
QosSeg
THPSegNum
N/A
N/A
QosSeg
THPThresh
[DBS_RR_MAX_
N/A
THP_SEGMENT1]
N/A
Hspa
DcHsdschSptInd N/A
N/A
rncLocRnc
RlRefTimeAjtSwit N/A
N/A
utranCell
EFACHBandWidt
N/A
h
N/A
SchPri
BasicPrio
N/A
N/A
SchPri
BearerType
N/A
N/A
SchPri
SchPriIndex
N/A
N/A
SchPri
SchPrio
N/A
N/A
utranCell
BPriAcIndex[DBS
_RR_MAX_NUM
N/A
_SHARED_PLM
N_PER_CELL]
N/A
utranCell
CgtCtlPriIndex[D
BS_RR_MAX_N
UM_SHARED_P N/A
LMN_PER_CELL
]
N/A
utranCell
ImpDlL2SuptInd
N/A
N/A
utranCell
LdCtlPriIndex[DB
S_RR_MAX_NU
N/A
M_SHARED_PL
MN_PER_CELL]
N/A
utranCell
SchPriIndex[DBS
_RR_MAX_NUM
N/A
_SHARED_PLM
N_PER_CELL]
N/A
utranCell
DcHsdschSupptI
N/A
nd
N/A
utranCell
EFACHSpptInd
N/A
N/A
CNbCom
CID
N/A
N/A
CNbCom
NbCPrdHrp
N/A
N/A
CNbCom
NbCPrdNHTcp
N/A
N/A
CNbCom
NbCPrdRtwp
N/A
N/A
CNbCom
NbCPrdTcp
N/A
N/A
CNbCom
NbCPrdRSEPS
N/A
N/A
BPriAc
BasicPrio
N/A
N/A
BPriAc
BPriAcIndex
N/A
N/A
BPriAc
CodeTreeResRto N/A
N/A
BPriAc
DchDlAcThresh
N/A
N/A
BPriAc
DchUlAcThresh
N/A
N/A
BPriAc
EdchAcThresh
N/A
N/A
BPriAc
HsdpaAcThresh
N/A
N/A
BPriAc
MbmsAcThresh
N/A
N/A
BPriAc
SafePwrOfst
N/A
N/A
BPriAc
ThreshRefCount
N/A
N/A
BPriAc
MCC
N/A
N/A
BPriAc
MNC
N/A
N/A
utranCell
BckNoiseAdjSwh N/A
N/A
utranCell
DlCacSwitch
N/A
N/A
OriBckNoise
Reference
Received Total
Wide Band
Power

Interface NBAP
Signalling"
utranCell
utranCell
PathLoss
N/A
N/A
utranCell
RefSFLayer
N/A
N/A
utranCell
RrcSigUsrNumTh
N/A
r
N/A
utranCell
DLEFACHUserN
N/A
um
N/A
utranCell
BgNoiScene
N/A
N/A
NbCom
ComMeasType
Common
Measurement
Type

Interface NBAP
Signalling"
NbCom
MeasFilterCoeff
Measurement
Filter Coefficient

Interface NBAP
Signalling"
NbCom
MeasObjType
CHOICE
Common
Measurement
Object Type

Interface NBAP
Signalling"
NbCom
NbCMCfgNo
N/A
N/A
NbCom
NbCMCfgNote
N/A
N/A
NbCom
RptPrd

Report Periodicity
Interface NBAP
Value
Signalling"
NbCom
RptPrdUnit

CHOICE Report
Interface NBAP
Periodicity Scale
Signalling"
NbCom
RptType
Report
Characteristics

Interface NBAP
Signalling"
utranCell
UlCacSwitch
N/A
N/A
utranCell
CpichEcN0
N/A
N/A
GloAc
QLength
N/A
N/A
GloAc
TTrueQ
N/A
N/A
GloAc
TTrueQReloc
N/A
N/A
LdCtrl
RequiredRDSwit
N/A
N/A
QosSeg
UlNormBitRate
N/A
N/A
TrfPc
BLERAccpPeriod N/A
N/A
TrfPc
BLERtarget
BLER Quality
value; BLER
TS 25.331: "RRC
interface RNSAP
signalling"
TrfPc
DwThrSampNuTti
N/A
10[3]
SubSrv
TS 25.331: "RRC
Protocol Specification";
E-DCH MAC-d
flow power offset;
EdchHarqPOFdd[
Interface NBAP
E-DCH HARQ
3]
Signalling"
Power Offset
FDD
interface RNSAP
signalling"
TrfPc
ErrorThresh
N/A
E-DCH
MAC-d
N/A
flow maximum
number of
retransmissions;
Maximum
Number Of
MaxRetransEdch
Retransmissions
For E-DCH;
Maximum
Number of
NhrThrDownTti10 Retransmissions
N/AE-DCH
for
[3]
N/A
TrfPc
NhrThrUpTti10[3] N/A
N/A
TrfPc
UpThrSampNuTti
N/A
10[3]
N/A
TrfPc
QeCntThres
N/A
N/A
TrfPc
QePhyBerTarNor
N/A
m
N/A
TrfPc
QePhyBerTarSil
N/A
N/A
FDD TPC
Downlink Step
Size;

Interface NBAP
Signalling"
interface RNSAP
signalling"
SubSrv
TrfPc
TrfPc
TpcDlStep
TS 25.331: "RRC
Interface NBAP
Signalling"
interface RNSAP
signalling"
N/A
TrfPc
TpcStepSize
TPC step size
TS 25.331: "RRC
TrfPc
TrfPcIndex
N/A
N/A
TrfPc
UlIlPcAlg
Power Control
Algorithm
TS 25.331: "RRC
TrfPc
UlSirTargDnStep N/A
N/A
TrfPc
UlSirTargUpStep N/A
N/A
TrfPc
MaxSirTargDnSte
N/A
p
N/A
utranCell
ImpUlL2SuptInd
N/A
N/A
Hspa
UlRlcSizeSptType N/A
N/A
rncFunction
CMaxUlPduSize
Largest UL RLC
PDU size
rncFunction
CMinUlPduSize
TS 25.331: "Radio
Minimum UL RLC
Resource Control (RRC)
PDU size
rncFunction
NonCMaxUlPduS Largest UL RLC

ize
PDU size
TS 25.331: "Radio
TS 25.331: "Radio
rncFunction
TS 25.331: "Radio
NonCMinUlPduSi Minimum UL RLC
ze
PDU size
externalUtranCell
AdjImpUL2SuptIn
N/A
d
N/A
TrfPc
QePhychBerTarg
N/A
et
N/A
rncFunction
BerTargAdpTimer N/A
N/A
TrfPc
BerErrorTbThres
N/A
h
N/A
TrfPc
BerTbThresh
N/A
N/A
TrfPc
BerTargDnStep
N/A
N/A
TrfPc
BerTargUpStep
N/A
N/A
rncFunction
MaxBerTarget
N/A
N/A
rncFunction
MinBerTarget
N/A
N/A
TrfPc
SwchAdaptiveSte
N/A
p
N/A
CMbms
CellCntSwch
N/A
N/A
CMbms
CId
N/A
N/A
CUeTrv
CId
N/A
N/A
CUeTrv
DrbcDchUeEvt
N/A
N/A
CUeTrv
DrbcDchUePrd
N/A
N/A
CUeTrv
DrbcDchUp
N/A
N/A
CUeTrv
DrbcEDchUpThpt N/A
N/A
CUeTrv
DrbcFachUp
N/A
N/A
CUeTrv
DrbcIBHsUp
N/A
N/A
CUeTrv
DrbcRachUeEvt
N/A
N/A
CUeTrv
DrbcRachUePrd
N/A
N/A
CUeTrv
DrbcSHsUp
N/A
N/A
CUeTrv
ETtiUpThpt
N/A
N/A
Drbc
AmrOverHspaSw
N/A
ch
N/A
Drbc
CChQSwch
N/A
N/A
Drbc
CRateThrd
N/A
N/A
Drbc
DchAdjRateSwch N/A
N/A
Drbc
DchE4aThd
N/A
N/A
Drbc
DchE4bThd
N/A
N/A
Drbc
DlPwrDasf
N/A
N/A
rncFunction
DnUdRecfgTimer N/A
N/A
Drbc
DrbcSwch
N/A
N/A
Drbc
DtcpEaThd
N/A
N/A
Drbc
DtcpEbThd
N/A
N/A
rncFunction
DToHsDelayThr
N/A
N/A
Drbc
DToIdleThd
N/A
N/A
Drbc
DToPchThd
N/A
N/A
Drbc
DxHsBo0E4bThd N/A
N/A
Drbc
FachE4aThd
N/A
N/A
Drbc
FachSwch
N/A
N/A
Drbc
FToIdleThd
N/A
N/A
Drbc
FToPchThd
N/A
N/A
Drbc
IBChQSwch
N/A
N/A
Drbc
InitialRateDl
N/A
N/A
Drbc
InitialRateUl
N/A
N/A
rncFunction
MaxCsDelay
25.331
Max CS Delay
Drbc
PchHoldTimeThr N/A
N/A
Drbc
PchSwch
N/A
N/A
Drbc
DlPsRateLmtHigh
N/A
C
N/A
Drbc
UlPsRateLmtHigh
N/A
C
N/A
Drbc
DlPsRateLmtLow
N/A
C
N/A
Drbc
UlPsRateLmtLow
N/A
C
N/A
Drbc
Rfach
N/A
N/A
Drbc
Rrach
N/A
N/A
Drbc
SChQSwch
N/A
N/A
Drbc
SrbOnEdchSwch N/A
N/A
Drbc
ToFtimesThr
N/A
N/A
Drbc
UlPwrDasf
N/A
N/A
rncFunction
UpUdRecfgTimer N/A
N/A
rncFunction
CsRrcOnFachSw
N/A
ch
N/A
rncFunction
MaxDHsRate
N/A
N/A
externalUtranCell
AdjCs64Switch
N/A
N/A
externalUtranCell
NrtMaxDlRateDc
N/A
hD
N/A
externalUtranCell
NrtMaxRateEdch
N/A
D
N/A
externalUtranCell
NrtMaxUlRateDc
N/A
hD
N/A
externalUtranCell
RtMaxDlRateDch
N/A
D
N/A
externalUtranCell
RtMaxRateEdch
D
N/A
N/A
externalUtranCell
RtMaxUlRateDch
N/A
D
N/A
GloAc
AmrDnRateAcSw
N/A
ch
N/A
rncFunction
CMaxPduSize

interface RNSAP
Maximum MAC-d
signalling"
PDU Size
Extended
Interface NBAP
Signalling"
Mbms
BonPTP
N/A
Mbms
CellfachCount
Connected mode TS 25.331: "RRC

counting scope
Mbms
CellpchCount

counting scope
Mbms
PThreUENum
N/A
N/A
Mbms
SonPTP
N/A
N/A
Mbms
UrapchCount

counting scope
N/A
QosSeg
DlRateAdjLev[MA
X_NUM_RATE_A N/A
DJUST]
N/A
QosSeg
DlRateAdjLevNu
m
N/A
N/A
QosSeg
UlRateAdjLev[MA
X_NUM_RATE_A N/A
DJUST]
N/A
QosSeg
UlRateAdjLevNu
m
N/A
N/A
rncFunction
InitRrcOnDch
N/A
N/A
SubSrv
PtmRlsPerm
N/A
N/A
ueCnst
T323
T323
TS 25.331: "RRC
ueCnst
T323Swch
N/A
TS 25.331: "RRC
UeTrv
AverageTime
Time Interval to
take an average
or a variance
TS 25.331: "RRC
UeTrv
MeaEvtId[MAX_U
Traffic volume
E_TRV_MEAS_E
event identity
VENT]
TS 25.331: "RRC
UeTrv
MeasEvtNum
N/A
N/A
UeTrv
Measobj
Uplink transport
channel type
TS 25.331: "RRC
UeTrv
MeasQuantity
Measurement
quantity
TS 25.331: "RRC
UeTrv
MeasRptTrMod
Measurement
Report Transfer
Mode
TS 25.331: "RRC
UeTrv
PendingTime[MA
Pending time
X_UE_TRV_MEA
after trigger
S_EVENT]
UeTrv
PrdRptAmount
Amount of
reporting
TS 25.331: "RRC
UeTrv
PrdRptInterval
Reporting interval
TS 25.331: "RRC
UeTrv
RptCrt
Periodical
Mode
UeTrv
RptRlcAveInd
Average of RLC
Buffer Payload
for each RB
UeTrv
RptRlcBufInd
RLC Buffer
TS 25.331: "RRC
Payload for each
RB
UeTrv
RptRlcVarInd
Variance of RLC
Buffer Payload
for each RB
UeTrv
RptThres[MAX_U
Reporting
E_TRV_MEAS_E
Threshold
VENT]
TS 25.331: "RRC
TS 25.331: "RRC
TS 25.331: "RRC
TS 25.331: "RRC
UeTrv
RptThres0[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres1[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres2[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres3[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres4[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres5[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
RptThres6[MAX_
Reporting
UE_TRV_MEAS_
Threshold
EVENT]
TS 25.331: "RRC
UeTrv
TrigTime[MAX_U
E_TRV_MEAS_E Time to trigger
VENT]
TS 25.331: "RRC
UeTrv
TxInterCfgPre[M
AX_UE_TRV_ME N/A
AS_EVENT]
N/A
UeTrv
TxInterruption[MA
Tx interruption
X_UE_TRV_MEA
after trigger
S_EVENT]
TS 25.331: "RRC
UeTrv
UeTrvMCfgNo
N/A
N/A
UeTrv
UeTrvMCfgNote
N/A
N/A
utranCell
Cs64Switch
N/A
N/A
utranCell
MaxRateMD
N/A
N/A
utranCell
NrtMaxDlRateDc
N/A
h
N/A
utranCell
NrtMaxRateEdch N/A
N/A
utranCell
NrtMaxUlRateDc
N/A
h
N/A
utranCell
RtMaxDlRateDch N/A
N/A
utranCell
RtMaxRateEdch
N/A
N/A
utranCell
RtMaxUlRateDch N/A
N/A
utranCell
DrxOnFachInd
N/A
N/A
rncFunction
T321
T321
TS 25.331: "RRC
rncFunction
DrxCycleLength
HS-DSCH DRX
cycleFACH
TS 25.331: "RRC
rncFunction
RxBurstLength
HS-DSCH Rx
burstFACH
TS 25.331: "RRC
rncFunction
UeDrxInd
N/A
N/A
utranCell
RrcRdtSwch
N/A
N/A
Drbc
DeltaNumE4B0T
N/A
hd
N/A
rncLocRnc
DrbcScene
N/A
N/A
Drbc
DchSig68Swch
N/A
N/A
UeInt
MeaEvtId[MAX_U
UE internal event TS 25.331: "RRC
E_INTER_MEAS
identity
_EVENT]
CUeTrv
DrbcCFachHsUp N/A
N/A
CUeTrv
DrbcCFachEDch
N/A
Up
N/A
utranCell
AmrDlLdThrd
N/A
N/A
utranCell
AmrUlLdThrd
N/A
N/A
rncLocRnc
NAmrInitialRate
N/A
N/A
rncLocRnc
WAmrInitialRate
N/A
N/A
RncFunction
HeartBeatUeVer
N/A
N/A
RncFunction
OnlyDnOnHB
N/A
N/A
RncFunction
HeartBeatFreq
N/A
N/A
utranCell
BchPwr
BCH Power

Interface NBAP
Signalling"
Chspa
CHsGBRResLmtI
N/A
dx
N/A
HS-PDSCH, HSSCCH, E-AGCH, TS 25.433: "UTRAN Iub

E-RGCH and E- Interface NBAP
HICH Total
Signalling"
Power
Chspa
HspaPwrRatio
Chspa
MaxHspaPwrRto N/A
CelMPO
MeasPwrOffset
Measurement
Power Offset
N/A
TS 25.331: "RRC
Interface NBAP
Signalling"
interface RNSAP
signalling"
CelMPO
AppHsdpaEInd
N/A
N/A
CelMPO
Cid
N/A
N/A
Chspa
MinHspaPwrRto
N/A
N/A
Chspa
Target Nonserving E-DCH to

NServToTotalPwr
Total E-DCH
Power Ratio

Interface NBAP
Signalling"
TS 25.321: "Medium
DivPc
DivPcIndex
N/A
N/A
DivPc
DpcchPilotEbN0
N/A
N/A
DivPc
DpchPO1
PO1
DivPc
DpchPO2
PO2
DivPc
DpchPO3
PO3
DivPc
EagchPOTti10
E-AGCH Power
Offset
DivPc
EagchPOTti2
E-AGCH Power
Offset

Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"

Interface NBAP
E-HICH Power
Signalling"
Offset
interface RNSAP
signalling"
Interface NBAP
E-HICH Power
Signalling"
Offset
interface RNSAP
signalling"
Interface NBAP
E-RGCH Power Signalling"
Offset
interface RNSAP
signalling"
Interface NBAP
E-RGCH Power Signalling"
Offset
interface RNSAP
signalling"
Interface NBAP
Maximum DL
Signalling"
Power; Maximum
DL TX Power
interface RNSAP
signalling"
Maximum
TS 25.331: "RRC
allowed UL TX
power; Maximum TS 25.423: "UTRAN Iur
Allowed UL Tx
interface RNSAP
Power
signalling"
Interface NBAP
Minimum DL
Signalling"
Power
interface RNSAP
signalling"
DivPc
EhichPOTti10
DivPc
EhichPOTti2
DivPc
ErgchPOTti10
DivPc
ErgchPOTti2
DivPc
MaxDlDpchPwr
DivPc
MaxUlDpchPwr
DivPc
MinDlDpchPwr
DivPc
PwrForHalfIsd
Max FACH
Power
DivPc
PwrForSglCell
Max FACH
Power
DivPc
TxDivMod
Diversity Mode;
Transmit
Diversity
Indicator
DivPc
ULInitSIR
UL SIR Target

Interface NBAP
Signalling"

Interface
NBAP
TS 25.433:
"UTRAN Iub
Signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
TS
25.433: "UTRAN
of transport
channelsIub
Interface
NBAP
onto physical
channels
Signalling"
(FDD)"
interface RNSAP
signalling"
DivPc
ULMaxSIR

Maximum Uplink
interface RNSAP
SIR
signalling"
DivPc
ULMinSIR
Minimum Uplink
SIR
GbrRes
HsGBRLev[MAX
N/A
_NUM_HS_GBR]
N/A
GbrRes
HsGBRLevNum
N/A
N/A
GbrRes
HsGBRResLimitI
N/A
dx
N/A
GbrRes
UEHsReqPwrUpli
m[MAX_NUM_H N/A
S_GBR]
N/A
GloAc
ForcQueSwiAMR N/A
N/A
GloAc
ForcQueSwiCS6
N/A
4
N/A
GloAc
TTrueQForced
N/A
ExtHspa
ExtHspa
N/A

interface RNSAP
signalling"

Interface NBAP
ACK Power
Signalling"
AckPwrOffset
Offset
interface RNSAP
signalling"
Interface NBAP
ACK-NACK
Signalling"
AnackRepFactor
Repetition Factor TS 25.423: "UTRAN Iur
interface RNSAP
signalling"
ExtHspa
CqiCycle
CQI Feedback
Cycle k
ExtHspa
CqiPwrOffset
CQI Power Offset
ExtHspa
CqiRepFactor
CQI Repetition
Factor
ExtHspa
EdchRefPO
E-DCH
Reference Power
Offset
EDPCCH/DPCCH
power offset; EDPCCH Power
Offset
EDPCCH/DPCCH
power offset; EDPCCH Power
Offset

Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface
RNSAP
TS 25.331:
"RRC
signalling"
Interface NBAP
Signalling"
TS
Iur
TS 25.423:
25.331: "UTRAN
"RRC
interface
RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
ExtHspa
EdpcchPOTti10
ExtHspa
EdpcchPOTti2
rncFunction
HsdschTotPwrMe
N/A
th
N/A
Hspa
HsGBRLimitSwi
N/A
rncFunction
rncFunction
rncFunction
N/A

Interface NBAP
ACK Power
Signalling"
InterAckPwrOfst
Offset
interface RNSAP
signalling"
Interface NBAP
Signalling"
InterCqiPwrOfst CQI Power Offset
interface RNSAP
signalling"
Interface NBAP
NACK Power
Signalling"
InterNackPwrOfst
Offset
interface RNSAP
signalling"
E-DCH Power
Offset for
ScheInfoPOTti10 Scheduling Info;
Power Offset for
Scheduling Info
E-DCH Power
Offset for
ScheInfoPOTti2 Scheduling Info;
Power Offset for
Scheduling Info

Interface NBAP
Signalling"
interface RNSAP
signalling"
Interface NBAP
Signalling"
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.331: "RRC
ExtHspa
TpcErrTarget
N/A
N/A
LdCtrl
AglLdDec
N/A
N/A
LdCtrl
Cid
N/A
N/A
LdCtrl
DlAdjustMFPSw
N/A
N/A
LdCtrl
DlAlrmLd
N/A
N/A
LdCtrl
DlDecRateSw
N/A
N/A
LdCtrl
DlDnMaxStg
N/A
N/A
LdCtrl
DlDropSw
N/A
N/A
ExtHspa
ExtHspa
ExtHspa
NackPwrOffset
NACK Power
Offset
LdCtrl
DlForceHandoffS
N/A
w
N/A
LdCtrl
DlMaxDrpUrNum N/A
N/A
LdCtrl
DlMaxForHoNum N/A
N/A
LdCtrl
DlOverLd
N/A
N/A
LdCtrl
DlSeriousOverLd N/A
N/A
LdCtrl
ForcedHOSwit
N/A
N/A
LdCtrl
ForcedRABRelS
wit
N/A
N/A
LdCtrl
ForceRABtoFAS
wit
N/A
N/A
LdCtrl
HsdsOverLdThr
N/A
N/A
LdCtrl
HsdsRecoverThr N/A
N/A
LdCtrl
MaxNumUeOfDe
N/A
cRat
N/A
LdCtrl
NFach
N/A
N/A
LdCtrl
NodeBSafeThr
N/A
N/A
LdCtrl
SwitchToFach
N/A
N/A
LdCtrl
UlAlrmLd
N/A
N/A
LdCtrl
UlDecRateSw
N/A
N/A
LdCtrl
UlDnMaxStg
N/A
N/A
LdCtrl
UlDropSw
N/A
N/A
LdCtrl
UlForceHandoffS
N/A
w
N/A
LdCtrl
UlMaxDrpUrNum N/A
N/A
LdCtrl
UlMaxForHoNum N/A
N/A
LdCtrl
UlOverLd
N/A
N/A
LdCtrl
UlSeriousOverLd N/A
N/A
LdCtrl
DlHighLd
N/A
N/A
LdCtrl
UlHighLd
N/A
N/A
Mbms
DlMbmsDropSw
N/A
N/A
Mbms
PwrForSelCom
N/A
N/A
Mbms
PwrForSoftCom
N/A
N/A
Mbms
ThreshForHalfIsd N/A
N/A
Mbms
ThreshForIsd
N/A
N/A
Mich
MichPwr
MICH Power
offset; MICH
Power
nodeB
AdjType
utranCell
AichPwr
TS 25.331: "RRC
Interface NBAP
Signalling"
Interface NBAP
Power
Signalling"
Adjustment Type TS 25.423: "UTRAN Iur
interface RNSAP
signalling"
TS 25.331: "RRC
AICH Power
offset; AICH
Power
Interface NBAP
Signalling"
utranCell
CoverPrd
N/A
N/A
TS 25.331: "RRC
PC preamble; PC
Preamble
interface RNSAP
signalling"
TS 25.331: "RRC
PICH Power
offset; PICH
Power
Interface NBAP
Signalling"
TS 25.331: "RRC
SRB delay; SRB
Delay
interface RNSAP
signalling"
utranCell
DpcchPcpLen
utranCell
PichPwr
utranCell
SrbDelay
utranCell
PORabHardHO
N/A
N/A
utranCell
POReEstablish
N/A
N/A
utranCell
POSetup
N/A
N/A
utranCell
POSoftHO
N/A
N/A
utranCell
POSrbHardHO
N/A
N/A
utranCell
PchPwr
PCH Power
PcpichPwr
Primary CPICH
Tx Power;
Primary CPICH
power; Primary
CPICH Power
utranCell

Interface NBAP
Signalling"
TS 25.331: "RRC
Interface NBAP
Signalling"
interface RNSAP
signalling"
Prach
ConstVal
Constant value
TS 25.331: "RRC
Prach
Maximum
MaxRACHTxPwr allowed UL TX
power
TS 25.331: "RRC
utranCell
PschPwr
QosSeg
EdchNormBitRat
N/A
e[MAX_BP]
N/A
QosSeg
HsNormBitRate[
MAX_BP]
N/A
N/A
QosSeg
MaxDlDpchPO[M
N/A
AX_BP]
N/A
QosSeg
MaxUlDpchPO[M
N/A
AX_BP]
N/A
rncBRnc
DynaUpdtPO2Stc
N/A
h
N/A
rncFunction
BlerAdjustSwitch N/A
N/A
Sccpch
MaxFachPwr
Max FACH
Power

Interface NBAP
Signalling"
Sccpch
PO1
PO1

Interface NBAP
Signalling"
Primary SCH
Power

Interface NBAP
Signalling"
Sccpch
PO3
PO3

Interface NBAP
Signalling"
Scpich
ScpichPwr
Secondary
CPICH Power

Interface NBAP
Signalling"
utranCell
SschPwr
Secondary SCH
Power

Interface NBAP
Signalling"
TrfPc
ThrHarqFailTti10[
N/A
3]
N/A
TrfPc
ThrHarqFailTti2[3
N/A
]
N/A
TrfPc
BLERAccpPerHL
N/A
d
N/A
BLER Quality
value; BLER
TS 25.331: "RRC
interface RNSAP
signalling"
TrfPc
BLERtargetHLd
TrfPc
DwThrSampNum
N/A
Tti2[3]
N/A
TrfPc
ErrorThreshHLd
N/A
N/A
TrfPc
NhrThrDownTti2[
N/A
3]
N/A
TrfPc
NhrThrUpTti2[3]
N/A
N/A
TrfPc
UpThrSampNum
N/A
Tti2[3]
N/A
utranCell
CloseFreFunSwit N/A
N/A
utranCell
DivPcIndex
N/A
N/A
utranCell
EndTimetoClsF[T
IME_STRUCT_L
N/A
ENGTH_OF_CL
OSE_FREQ]
N/A
utranCell
ForbTimAftOpnF N/A
N/A
utranCell
FreClsOpnTrigTm N/A
N/A
utranCell
OpenFreAlg
N/A
N/A
utranCell
SIB7Originator
N/A
N/A
utranCell
StartTimetoClsF[
TIME_STRUCT_
N/A
LENGTH_OF_CL
OSE_FREQ]
N/A
utranCell
TrfPcIndex
N/A
N/A
utranCell
UeNumThreshCls N/A
N/A
Chspa
CEdchUserNum
N/A
N/A
utranCell
ULEFACHSuppor
N/A
t
N/A
Efach
UlIntfCEdchInd
N/A
N/A
Efach
POPpe
Power offset Pp- TS 25.331: "RRC

e
Efach
AddEdchTrBack
Off
Additional E-DCH
TS 25.331: "RRC
transmission
back off
Efach
Efach
Efach
CommonEdchNu
N/A
m
Maximum E-DCH
resource
allocation for
CCCH, maximum
MaxEdchResCcc
common E-DCH
h
resource
allocation time for
CCCH
E-DCH
transmission
EdchTrConBack transmission
Off
continuation back
off
N/A
25.331
25.433
25.319
25.331
25.319
Efach
Maximum period
25.331
MaxPeriCollResol for collision
25.319
resolution phase
Efach
UlIlPcAlgEFach
Power Control
Algorithm
TS 25.331: "RRC
Efach
TpcStepSizeEFa
TPC step size
ch
TS 25.331: "RRC
TS 25.331: "RRC
TS 25.321: "Medium
rncFunction
HappyBitDelCEd Happy bit delay

ch
condition
ExtHspa
HspaType
N/A
N/A
Efach
MPOEFach
Measurement
Power Offset
25.331
25.433
Efach
MaxBitRateCEdc
N/A
h
N/A
Efach
SIRtargetCEdch
25.433
Efach
AckNackCqiSupI
N/A
nd
Efach
FdpchPwrEFach
Initial power on
F-DPCH
25.433
NbDed
EvtEfSirEThrd1
Measurement
Threshold 1

Interface NBAP
Signalling"
NbDed
NbDed
externalUtranCell
UL SIR Target
DlRateLevel[DBS
_RR_MAX_NUM
_DL_RATE_LEV N/A
EL_FOR_DEDM
EAS-1]
EvtAbTcpThrd[DB
S_RR_MAX_NU
Measurement
M_DL_RATE_LE
Threshold;
VEL_FOR_DED
MEAS]
EPowBoostSuppI
N/A
nd
N/A
N/A

Interface NBAP
Signalling"
N/A
utranCell
LoadScene
N/A
N/A
Hspa
POEhichSerRls2 N/A
N/A
Hspa
POEhichSerRls1
N/A
0
N/A
Hspa
POEhichNoSerRl
N/A
2
N/A
Hspa
POEhichNoSerRl
N/A
10
N/A
Hspa
POErgchSerRls2 N/A
N/A
Hspa
POErgchSerRls1
N/A
0
N/A
Hspa
POErgchNonSer
Rls
N/A
N/A
utranCell
HsupaAdaTranS
wch
N/A
N/A
utranCell
EdchNumLev[2]
N/A
N/A
utranCell
DefaulEdchNumL
N/A
ev
N/A
Hspa
EagchPOUptSwc
N/A
h
utranCell
DlTpcN
DL TPC Pattern
01 Count

Interface NBAP
Signalling"
utranCell
PcpiPwrDnStep
N/A
N/A
utranCell
PcpiPwrDnStepT
N/A
m
N/A
utranCell
PcpiPwrDnTmWi
N/A
n
N/A
TrfPc
SrvType
N/A
N/A
externalUtranCell
Altitude
Altitude
Interface RANAP
Signalling"
externalUtranCell
AltitudeAcc
Vertical Accuracy
Interface RANAP
Code
Signalling"
externalUtranCell
AltitudeDir
Direction of
Altitude
Interface RANAP
Signalling"
externalUtranCell
AnteAltitude
Altitude
Interface RANAP
Signalling"
externalUtranCell
AnteAltitudeDir
Direction of
Altitude
Interface RANAP
Signalling"
N/A
Geographical
Coordinates
>Latitude
Interface RANAP
Signalling"
externalUtranCell
AnteLatitude
externalUtranCell
Geographical
AnteLatitudeSign Coordinates
>Latitude Sign
Interface RANAP
Signalling"
externalUtranCell
AnteLongitude
Geographical
Coordinates >
Degrees Of
Longitude
Interface RANAP
Signalling"
externalUtranCell
AnteType
N/A
N/A
externalUtranCell
CellDescripType
Geographical
Area
TS 25.331: "RRC
Interface RANAP
Signalling"
externalUtranCell
CellRadius
N/A
Interface RANAP
Signalling"
externalUtranCell
GARptType
Geographical
Area
Interface RANAP
Signalling"
externalUtranCell
Confidence
Confidence
Interface RANAP
Signalling"
InnerAngle
Inner Angle
TS 25.453: "UTRAN
Iupc interface
Positioning Calculation
Application Part (PCAP)
signalling"
externalUtranCell
Latitude
Geographical
Coordinates >
Degrees Of
Latitude
Interface RANAP
Signalling"
externalUtranCell
LatitudeSign
Geographical
Coordinates
>Latitude Sign
Interface RANAP
Signalling"
externalUtranCell
externalUtranCell
Longitude
Geographical
Coordinates >
Degrees Of
Longitude
externalUtranCell
OffsetAngle
Offset angle
externalUtranCell
PolygonPointNu
m
Polygon>Geographical
Coordinates
externalUtranCell
Geographical
PolyLatitude[MAX Coordinates >
_POINT_NUM]
Degrees Of
Latitude
Interface RANAP
Signalling"
externalUtranCell
PolyLatitudeSign[ Geographical
MAX_POINT_NU Coordinates
M]
>Latitude Sign
Interface RANAP
Signalling"
externalUtranCell
Geographical
PolyLongitude[M
Coordinates >
AX_POINT_NUM
Degrees Of
]
Longitude
Interface RANAP
Signalling"
rncFunction
GpsInfoRoot
N/A
N/A
Interface RANAP
Signalling"
Interface RANAP
Signalling"
TS 25.453: "UTRAN
Iupc interface
signalling"
Interface RANAP
Signalling"
rncBRnc
AckNackEncInd
N/A
TS 25.331: "RRC
Interface RANAP
Signalling"
rncBRnc
BasedImsiHoInd
N/A
N/A
rncFunction
CellLdInfoVldTim N/A
Interface RANAP
Signalling"
rncBRnc
DtmSuppInd
Interface RANAP
Signalling"
N/A
TS 25.331: "RRC
Interface RANAP
Signalling"
TS 25.331: "RRC
Interface RANAP
Signalling"
rncFunction
EBroadcastSupIn
N/A
d
rncBRnc
FourEChAllowed N/A
rncBRnc
LCSMethod
N/A
N/A
rncBRnc
LdBsdIntSysHOIn
N/A
d
N/A
TS 25.331: "RRC
Interface RANAP
Signalling"
TS 25.331: "RRC
Interface RANAP
Signalling"
TS 25.331: "RRC
Interface RANAP
Signalling"
rncFunction
MbmsIurSupInd
N/A
rncFunction
MulticastSupInd
N/A
rncBRnc
NaccSuppInd
N/A
rncBRnc
NbrCellMonSupIn
N/A
d
N/A
rncBRnc
PsConvTraSup
N/A
rncBRnc
PsInterSysHoSup
N/A
p
Interface RANAP
Signalling"
rncBRnc
PsSigForImsInd
Interface RANAP
Signalling"
N/A
N/A
N/A
TS 25.331: "RRC
rncBRnc
PTPoverHS
rncBRnc
ServBasedHoInd N/A
N/A
rncBRnc
WAmrSupInd
N/A
TS 25.331: "RRC
utranCell
PriRedirectRat
N/A
TS 25.331: "RRC
utranCell
Altitude
Altitude
Interface RANAP
Signalling"
utranCell
AltitudeAcc
Vertical Accuracy
Interface RANAP
Code
Signalling"
utranCell
AltitudeDir
Direction of
Altitude
Interface RANAP
Signalling"
utranCell
AnteAltitude
Altitude
Interface RANAP
Signalling"
utranCell
AnteAltitudeDir
Direction of
Altitude
Interface RANAP
Signalling"
utranCell
AnteLatitude
Geographical
Coordinates
>Latitude
Interface RANAP
Signalling"
utranCell
Geographical
AnteLatitudeSign Coordinates
>Latitude Sign
Interface RANAP
Signalling"
utranCell
AnteLongitude
Geographical
Coordinates >
Degrees Of
Longitude
utranCell
AnteType
N/A
N/A
Interface RANAP
Signalling"
utranCell
CellDescripType
Geographical
Area
TS 25.331: "RRC
Interface RANAP
Signalling"
utranCell
CellRadius
N/A
Interface RANAP
Signalling"
utranCell
ClassZoneInd
N/A
Interface RANAP
Signalling"
utranCell
Confidence
Confidence
Interface RANAP
Signalling"
utranCell
GARptType
Geographical
Area
Interface RANAP
Signalling"
InnerAngle
Inner Angle
TS 25.453: "UTRAN
Iupc interface
signalling"
utranCell
Latitude
Geographical
Coordinates >
Degrees Of
Latitude
Interface RANAP
Signalling"
utranCell
LatitudeSign
Geographical
Coordinates
>Latitude Sign
Interface RANAP
Signalling"
Longitude
Geographical
Coordinates >
Degrees Of
Longitude
Interface RANAP
Signalling"
utranCell
utranCell
Interface RANAP
Signalling"
TS 25.453: "UTRAN
Iupc interface
signalling"
Interface RANAP
Signalling"
utranCell
OffsetAngle
Offset angle
utranCell
PolygonPointNu
m
Polygon
utranCell
Geographical
PolyLatitude[MAX Coordinates >
_POINT_NUM]
Degrees Of
Latitude
Interface RANAP
Signalling"
utranCell
PolyLatitudeSign[ Geographical
MAX_POINT_NU Coordinates
M]
>Latitude Sign
Interface RANAP
Signalling"
utranCell
Geographical
PolyLongitude[M
Coordinates >
AX_POINT_NUM
Degrees Of
]
Longitude
Interface RANAP
Signalling"
utranCell
TutranGpsSptInd N/A
N/A
CNbCom
NbCPrdTUGps
N/A
N/A
rncFunction
RncLcsOverIurS
w
N/A
N/A
rncFunction
RncSasLcsSwch N/A
N/A
rncFunction
SasLcsMode
N/A
N/A
utranCell
hsdStat
N/A
N/A
utranCell
hsuStat
N/A
N/A
utranCell
mbmsStat
N/A
N/A
NbCom
GpsMeasAccClas TUTRAN-GPS
s
Accuracy Class

Interface NBAP
Signalling"
NbCom
OnModChangTim TUTRAN-GPS
e
Change Limit

Interface NBAP
Signalling"
NbCom
Predicted
OnModDeviTime TUTRAN-GPS
Deviation Limit

Interface NBAP
Signalling"
CNbCom
NbCModTUGps
N/A
N/A
externalUtranCell
MNCBcdCodeLe
N/A
n[4]
N/A
iuCnst
Tdatafwd
TDATAfwd
Interface RANAP
Signalling"
iuCnst
Tqueuing
TQUEUING
Interface RANAP
Signalling"
iuCnst
Trafc
TRafC
Interface RANAP
Signalling"
iuCnst
Tratc
TRatC
Interface RANAP
Signalling"
iuCnst
Trelocoverall
TRELOCoverall
Interface RANAP
Signalling"
iuCnst
Trelocprep
TRELOCprep
Interface RANAP
Signalling"
iuCnst
Tresetdelay
N/A
N/A
iuCnst
Tresetwait
N/A
N/A
rncFunction
EmgCallRdtSwitc
N/A
h
N/A
rncFunction
InterRatUpVer
N/A
N/A
rncFunction
IntraRatUpVer
N/A
N/A
rncBRnc
Cs64RbModeSw
N/A
ch
N/A
rncFunction
CbsSwitch
N/A
N/A
rncLocRnc
CdtImeiAcqSwitc
N/A
h
N/A
rncFunction
CdtMrOvdThd
N/A
N/A
rncLocRnc
CdtSwitch
N/A
N/A
rncLocRnc
MrSwitch
N/A
N/A
rncFunction
MrUeLocMeaRptI
N/A
nt
N/A
rncFunction
MrUeMeasRptInt N/A
N/A
rncFunction
MrUeMeasRptTr
Mod
rncFunction
MrUeMeasTypeS
N/A
wit
N/A
ueCnst
N300
N300
TS 25.331: "RRC
ueCnst
N302
N302
TS 25.331: "RRC
ueCnst
N304
N304
TS 25.331: "RRC
ueCnst
N312Connected
N312
TS 25.331: "RRC
ueCnst
N312Idle
N312
TS 25.331: "RRC
Measurement
Report Transfer
Mode
TS 25.331: "RRC
ueCnst
N313
N313
TS 25.331: "RRC
ueCnst
N315
N315
TS 25.331: "RRC
ueCnst
T300
T300
TS 25.331: "RRC
ueCnst
T302
T302
TS 25.331: "RRC
ueCnst
T304
T304
TS 25.331: "RRC
ueCnst
T305
T305
TS 25.331: "RRC
ueCnst
T307
T307
TS 25.331: "RRC
ueCnst
T308
T308
TS 25.331: "RRC
ueCnst
T309
T309
TS 25.331: "RRC
ueCnst
T312Connected
T312
TS 25.331: "RRC
ueCnst
T312Idle
T312
TS 25.331: "RRC
ueCnst
T313
T313
TS 25.331: "RRC
ueCnst
T314
T314
TS 25.331: "RRC
ueCnst
T315
T315
TS 25.331: "RRC
ueCnst
T316
T316
TS 25.331: "RRC
utranCell
DlControledMBR N/A
N/A
utranCell
DlCtrlMBRSwitch N/A
N/A
utranCell
MrCellMeasSwit
N/A
N/A
utranCell
MrCelMRptIntCo
N/A
ef
N/A
utranCell
MrUeMeasSwit
N/A
N/A
utranCell
UlControledMBR N/A
N/A
utranCell
UlCtrlMBRSwitch N/A
N/A
CelSel
ACBarredOmcr
CelSel
CellBarredInd
CelSel
CellRsvExt
CelSel
CId
TS 25.331: "RRC
Access Class
TS 25.304: "UE
Barred
Procedures in Idle
Mode"
TS 25.331: "RRC
Cell Barred
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Cell Reservation
TS 25.304: "UE
Extension
Procedures in Idle
Mode"
N/A
N/A
DeltaQrxlevmin
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
CelSel
DltaQRxLevMin
CelSel
DltaQRxLevMinPr N/A
TS 25.304: "UE
Procedures in Idle
Mode"
CelSel
HcsSrvCelInfoPre N/A
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Inter-frequency
ScalingFactor for TS 25.304: "UE
Treselection
Procedures in Idle
Mode"
Intra-frequency
cell re-selection
indicator
CelSel
InFreqReselInd
CelSel
InterFreqSf
CelSel
InterFreqSfPre
N/A
InterRatSf
TS 25.331: "RRC
Inter-RAT
ScalingFactor for TS 25.304: "UE
Treselection
Procedures in Idle
Mode"
CelSel
TS 25.304: "UE
Procedures in Idle
Mode"
CelSel
CelSel
CelSel
CelSel
CelSel
CelSel
CelSel
InterRatSfPre
N/A
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
NCr
NCR
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
NoHcsNCr
Non-HCS_NCR TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
NonNoHcsTCrMax
TS 25.304: "UE
HCS_TCrmax
Procedures in Idle
Mode"
TS 25.331: "RRC
NonProtocol Specification"
NoHcsTCrMaxHy
HCS_TCRmaxHy TS 25.304: "UE
st
st
Procedures in Idle
Mode"
TS 25.331: "RRC
Cell Reserved for
OperatorUseInd
TS 25.304: "UE
operator use
Procedures in Idle
Mode"
OtherRATInfoPre N/A
CelSel
QHcsEcNo
Qhcs
CelSel
QHcsRSCP
Qhcs
CelSel
QHyst1S
Qhyst1s
CelSel
QHyst1SFach
Qhyst1s, FACH
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qhyst1s, PCH
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qhyst2s
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qhyst2s, FACH TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qhyst2s, PCH
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.304: "UE
Procedures in Idle
Qqualmin
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Qrxlevmin
Mode"
TS 25.331: "RRC
TS 25.331: "RRC
Cell selection and Protocol Specification"
reselection
TS 25.304: "UE
quality measure Procedures in Idle
Mode"
TS 25.304: "UE
Procedures in Idle
SHCS, RAT
Mode"
TS 25.331: "RRC
CelSel
QHyst1SPch
CelSel
QHyst2S
CelSel
QHyst2SFach
CelSel
QHyst2SPch
CelSel
QQualMin
CelSel
QRxLevMin
CelSel
QualMeas
CelSel
SHCSRat
CelSel
SHCSRatPre
N/A
TS 25.304: "UE
Procedures in Idle
Mode"
CelSel
Sib3orSib4
N/A
TS 25.331: "RRC
Sintersearch
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
CelSel
SInterSearch
SInterSearchPre N/A
TS 25.304: "UE
Procedures in Idle
Mode"
CelSel
SIntraSearch
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
CelSel
SIntraSearchPre N/A
CelSel
CelSel
SLimitRat
CelSel
SpSf
CelSel
SpSfPre
Sintrasearch
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.304: "UE
Procedures in Idle
Slimit,
Mode"
SearchRAT
TS 25.331: "RRC
TS 25.331: "RRC
Speed
dependent
TS 25.304: "UE
ScalingFactor for
Procedures in Idle
Treselection
Mode"
N/A
TS 25.304: "UE
Procedures in Idle
Mode"
SsearchHCS
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
CelSel
SSearchHCS
CelSel
SSearchHCSPre N/A
CelSel
SSearchRat
Ssearch, RAT
CelSel
TBarred
Tbarred
CelSel
TCrMax
TCRmax
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
CelSel
TCrMaxHyst
TCrmaxHyst
CelSel
TReselection
Treselections
CelSel
TReselectionFac Treselections,
h
FACH
CelSel
TReselectionPch
CelSel
Deferred
measurement
DefSibSuptSwch
control UTRAN
support
CelSel
IntraRptQSib3
Intra-frequency
TS 25.331: "System
reporting quantity Information Block type
SIB3
3"
CInter
EvtMeasEcNo
N/A
N/A
CInter
EvtMeasRSCP
N/A
N/A
CRat
EvtMeasEcNo2
N/A
N/A
CRat
EvtMeasRSCP2
N/A
N/A
CInter
PrdMeasEcNo
N/A
N/A
Treselections,
PCH
TS 25.331: "System
Information Block type
3"
CInter
PrdMeasRSCP
N/A
N/A
CInter
TrfCategory
N/A
N/A
CInter
TrfCatInterMIdx
N/A
N/A
CInter
EvtMeasEcNo2
N/A
N/A
CInter
EvtMeasRSCP2
N/A
N/A
CInter
EvtMeasEcNo3
N/A
N/A
CInter
EvtMeasRSCP3
N/A
N/A
CIntra
TrfCategory
N/A
N/A
CIntra
TrfCatIntraMIdx
N/A
N/A
CMbms
HcsOffMbms
HCS_OFFmbms
TS 25.331: "RRC
CMbms
QoffMbms
Qoffmbms
TS 25.331: "RRC
CRat
EvtMeasEcNo
N/A
N/A
CRat
EvtMeasRSCP
N/A
N/A
CRat
PrdMeasEcNo
N/A
N/A
CRat
PrdMeasRSCP
N/A
N/A
CRat
TrfCategory
N/A
N/A
CRat
TrfCatRatMIdx
N/A
N/A
externalGsmCell
CellIndivOffset
Cell Individual
Offset
TS 25.331: "RRC
externalGsmCell
DtQrxLvMnSib11 DeltaQrxlevmin
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
externalGsmCell
DtQrxLvMnSib11
N/A
Pr
TS 25.304: "UE
Procedures in Idle
Mode"
externalGsmCell
DtQrxLvMnSib12 Qrxlevmin
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
externalGsmCell
DtQrxLvMnSib12
N/A
Pr
TS 25.304: "UE
Procedures in Idle
Mode"
externalGsmCell
GsmDlLdThrd
N/A
N/A
externalGsmCell
GsmDlRtLdThrd
N/A
N/A
externalGsmCell
GsmUlLdThrd
N/A
N/A
externalGsmCell
GsmUlRtLdThrd
N/A
N/A
TS 25.331: "RRC
HCS_PRIO; HCS interface RNSAP
Prio
signalling"
TS 25.304: "UE
Procedures in Idle
TS
25.331: "RRC
Mode"
Qrxlevmin
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qrxlevmin
TS 25.304: "UE
Procedures in Idle
Mode"
externalGsmCell
HcsPrio
externalGsmCell
QrxLevMinSib11
externalGsmCell
QrxLevMinSib12
externalUtranCell
TS 25.304: "UE
Procedures in Idle
Mode"
externalUtranCell
DtQrxLvMnSib11
N/A
Pr
TS 25.304: "UE
Procedures in Idle
Mode"
externalUtranCell
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
externalUtranCell
DtQrxLvMnSib12
N/A
Pr
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Prio
signalling"
TS 25.304: "UE
Procedures in Idle
TS
25.331: "RRC
Mode"
Qqualmin
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qqualmin
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qrxlevmin
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
Qrxlevmin
TS 25.304: "UE
Procedures in Idle
Mode"
externalUtranCell
HcsPrio
externalUtranCell
QqualMinSib11
externalUtranCell
QqualMinSib12
externalUtranCell
QrxLevMinSib11
externalUtranCell
QrxLevMinSib12
gsmRelation
GsmStateMode
N/A
N/A
gsmRelation
MeasPrio
N/A
N/A
gsmRelation
PenaltyTimeSib1
Penalty_time
1
gsmRelation
PenaltyTimeSib1
Penalty_time
2
gsmRelation
QhcsSib11
Qhcs
gsmRelation
QhcsSib12
Qhcs
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
gsmRelation
gsmRelation
gsmRelation
gsmRelation
TS 25.331: "RRC
Qoffset1SNSib11 Qoffset1s, n
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TempOffset1Sib1 Temporary_offset
TS 25.304: "UE
1
1
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
2
1
Procedures in Idle
Mode"
gsmRelation
UseOfHCS
Use of HCS
TS 25.331: "RRC
gsmRelation
Sib11orSib11bis
N/A
TS 25.331: "RRC
Inter
FilterCoeff
Filter coefficient
TS 25.331: "RRC
Inter
Hysteresis[MAX_I
NTER_MEAS_E Hysteresis
VENT]
TS 25.331: "RRC
Inter
InterMeasCfgNo
N/A
N/A
Inter
InterMeasCfgNot
N/A
e
N/A
Inter
MeaEvtId[MAX_I
Inter-frequency
NTER_MEAS_E
event identity
VENT]
TS 25.331: "RRC
Inter
MeasEvtNum
N/A
Inter
MeasQuantity
Measurement
quantity for
TS 25.331: "RRC
frequency quality Protocol Specification"
estimate
Inter
PrdRptAmount
Amount of
reporting
TS 25.331: "RRC
Inter
PrdRptInterval
Reporting interval
TS 25.331: "RRC
Inter
RptCrt
Periodical
Mode
Inter
ThreshNoUsedFr
Threshold non
eq[MAX_INTER_
used frequency
MEAS_EVENT]
TS 25.331: "RRC
Inter
ThreshUsedFreq[
Threshold used
MAX_INTER_ME
frequency
AS_EVENT]
TS 25.331: "RRC
Inter
TrigTime[MAX_IN
TER_MEAS_EVE Time to trigger
NT]
TS 25.331: "RRC
Inter
WNoUsed[MAX_I
W non-used
NTER_MEAS_E
frequency
VENT]
TS 25.331: "RRC
Inter
Wused[MAX_INT
W used
ER_MEAS_EVE
frequency
NT]
TS 25.331: "RRC
plBal
CallHoldLBSw
N/A
N/A
N/A
plBal
CallHoldSBSw
N/A
N/A
plBal
CsBalSwch
N/A
N/A
plBal
DlCdThdCs
N/A
N/A
plBal
DlCdThdR99Ps
N/A
N/A
plBal
DlLdBalHsdWeig
N/A
ht
N/A
plBal
DlLdBalPwrSwch N/A
N/A
plBal
DlLdBalPwrWeig
N/A
ht
N/A
plBal
DlLdHsThdHsd
N/A
N/A
plBal
DlPwrThdCs
N/A
N/A
plBal
DlPwrThdCs4G
N/A
N/A
plBal
DlPwrThdR99Ps
N/A
N/A
plBal
ExtraCDeltaCdTr
N/A
d
N/A
plBal
ExtraDeltaHsdTrd N/A
N/A
plBal
ExtraCDeltaTrd
N/A
N/A
plBal
ExtraCDeltaTru
N/A
N/A
plBal
InitRrcLBSw
N/A
N/A
plBal
InitRrcSBSw
N/A
N/A
plBal
LdBalCdSwch
N/A
N/A
plBal
LdBalCdWeight
N/A
N/A
plBal
LdBalHsSwch
N/A
N/A
plBal
RabAssLBSw
N/A
N/A
plBal
RabAssSBSw
N/A
N/A
plBal
UlLdBalPwrSwch N/A
N/A
plBal
UlLdBalPwrWeig
N/A
ht
N/A
plBal
UlLdThdCs
N/A
N/A
plBal
UlLdThdCs4G
N/A
N/A
plBal
UlLdThdR99Ps
N/A
N/A
plBal
DulCarBalEcNoT
N/A
hd
N/A
plBal
DulCarBalRscpT
N/A
hd
N/A
plBal
HoldHspaPluBalS
w
N/A
[Max_HSPA_PLU
S_CAP]
N/A
plBal
HspaPluBalCapP
ri
N/A
[Max_HSPA_PLU
S_CAP]
N/A
plBal
HspaPlusCapInd
[Max_HSPA_PLU N/A
S_CAP]
N/A
plBal
RabHspaPluBalS
w[Max_HSPA_PL N/A
US_CAP]
N/A
plBal
RrcDualCarrSw
N/A
N/A
PriSel
AllowMeasBand
[MAX_NUM_
EUTRAN
_FREQ]
EARFCN
TS 25.331: "RRC
PriSel
DlEARFCN[MAX
Measurement
_NUM_ EUTRAN
Bandwidth
_FREQ]
PriSel
EutranHighThres
h
Threshx, high
[MAX_NUM_EUT
RAN_FREQ]
PriSel
EutranInterFNum N/A
PriSel
EutranLowThresh
[MAX_NUM_EUT Threshx, low
RAN_FREQ]
PriSel
EutranPriority
[MAX_NUM_EUT priority
RAN_FREQ]
PriSel
GeranHighThresh
[MAX_NUM_GE
Threshx, high
RAN_CELL_GR
OUP]
PriSel
GeranLowThresh
[MAX_NUM_GE
Threshx, low
RAN_CELL_GR
OUP]
PriSel
GeranPriority
[MAX_NUM_GE
RAN_CELL_GR
OUP]
PriSel
GsmBandIndicato
r[MAX_NUM_GE
Band indicator
RAN_CELL_GR
OUP]
priority
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.331: "RRC
PriSel
PriSel
PriSel
PriSel
PriSel
PriSel
PriSel
PriSel
PriSel
TS 25.304: "UE
Procedures in Idle
GsmCellGroupNu
N/A
Mode"
m
TS 25.331: "RRC
TS 25.304: "UE
QqualminFDD
Procedures in Idle
[MAX_NUM_UTR QqualminFDD
Mode"
AN_FREQ]
TS 25.331: "RRC
TS 25.304: "UE
QrxlevminEUTRA
Procedures in Idle
[MAX_NUM_
QrxlevminEUTRA Mode"
EUTRAN
TS 25.331: "RRC
_FREQ]
TS 25.304: "UE
QrxlevminFDD[M
Procedures in Idle
AX_NUM_UTRA QrxlevminFDD
Mode"
N_FREQ]
TS 25.331: "RRC
TS 25.304: "UE
QrxlevminGSM[M
Procedures in Idle
AX_NUM_GERA
QrxlevminGSM
Mode"
N_CELL_GROU
TS 25.331: "RRC
P]
TS 25.304: "UE
Procedures in Idle
ServCelPriority
priority
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
SPrioritySearch1 Sprioritysearch1 Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
SPrioritySearch2 Sprioritysearch2 Mode"
TS 25.331: "RRC
StartARFCN[MA
X_NUM_GERAN Starting ARFCN
_CELL_GROUP]
PriSel
ThreshServingLo Threshserving,
w
low
PriSel
UtranHighThresh[
MAX_NUM_UTR Threshx, high
AN_FREQ]
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
N/A
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS
25.331:
"RRC
Protocol
Specification"
TS25.423
Interface NBAP
Signalling";
TS 25.401: "UTRAN
TS 25.331: "RRC
PriSel
UtranInterFNum
PriSel
UtranLowThresh[
MAX_NUM_UTR Threshx, low
AN_FREQ]
PriSel
UtranPriority
[MAX_NUM_UTR priority
AN_FREQ]
PriSel
UtranUARFCN[M
AX_NUM_UTRA UARFCN
N_FREQ]
Rat
EventId
Inter-RAT event
[MAX_RAT_MEA
identity
S_EVENT]
Rat
EventNum
N/A
N/A
Rat
FilterCoeff
Filter coefficient
TS 25.331: "RRC
Rat
GsmFilterCoeff
Filter coefficient
TS 25.331: "RRC
Rat
EutraFilterCoeff
Filter coefficient
TS 25.331: "RRC
Rat
Hysteresis[MAX_
RAT_MEAS_EVE Hysteresis
NT]
TS 25.331: "RRC
Rat
InterRatCfgNo
N/A
N/A
Rat
InterRatCfgNote
N/A
N/A
Rat
OwnMeasQuantit Measurement
y
quantity
Rat
PrdRptAmount
Amount of
reporting
TS 25.331: "RRC
Rat
PrdRptInterval
Reporting interval
TS 25.331: "RRC
Rat
RptCrt
Periodical
Mode
Rat
Thresh[MAX_RA
Threshold own
T_MEAS_EVENT
system
]
TS 25.331: "RRC
Rat
ThreshSys[MAX_
Threshold other
RAT_MEAS_EVE
system
NT]
TS 25.331: "RRC
Rat
TrigTime[MAX_R
AT_MEAS_EVEN Time to trigger
T]
TS 25.331: "RRC
Rat
W[MAX_RAT_ME
W
AS_EVENT]
TS 25.331: "RRC
rncBRnc
AmrIfHoSwch
N/A
N/A
rncBRnc
AmrRatHoSwch
N/A
N/A
TS 25.331: "RRC
rncBRnc
HsdpaIfHoSwch
N/A
N/A
rncBRnc
HsdpaRatHoSwc
N/A
h
N/A
rncBRnc
HsupaIfHoSwch
N/A
N/A
rncBRnc
HsupaRatHoSwc
N/A
h
N/A
rncBRnc
R99NrtIfHoSwch N/A
N/A
rncBRnc
R99NrtRatHoSwc
N/A
h
N/A
rncBRnc
R99RtIfHoSwch
N/A
N/A
rncBRnc
R99RtRatHoSwc
N/A
h
N/A
rncFunction
DcRedirectStaSw N/A
N/A
rncLocRnc
HoToGsmPenTim
N/A
er
N/A
rncLocRnc
ServHoComStra
N/A
N/A
rncLocRnc
AmrServHoStra
N/A
N/A
rncLocRnc
CompMdCfgStra N/A
N/A
rncLocRnc
Cs64ServHoStra N/A
N/A
rncLocRnc
PsNrtServHoStra N/A
N/A
rncLocRnc
PsRtServHoStra
N/A
N/A
rncLocRnc
ServHoInd
N/A
N/A
rncFunction
T4StpIfMeaActRa
N/A
t
N/A
SysMc
FDDInterFMeasIn
N/A
d
TS 25.331: "RRC
SysMc
InterRatMIndPre
N/A
TS 25.331: "RRC
SysMc
Sib11orSib12
N/A
N/A
utranCell
AbsPriReselSwch N/A
N/A
utranCell
CellIndivOffset
Cell Individual
Offset
TS 25.331: "RRC
utranCell
DetSetHoSwch
N/A
N/A
utranCell
DlPwrHoSwch
N/A
N/A
utranCell
HcsPrio
TS 25.331: "RRC
Prio
signalling"
TS 25.304: "UE
Procedures in Idle
Mode"
utranCell
InterHoMth
N/A
N/A
utranCell
InterHoTactic
N/A
N/A
utranCell
IntraMeasQuan
Measurement
quantity
TS 25.331: "RRC
utranCell
IntRatHoMth
N/A
N/A
utranCell
Measurement
NonIntraMeasQu quantity for
TS 25.331: "RRC
an
frequency quality Protocol Specification"
estimate
utranCell
PrefTrafType
N/A
N/A
utranCell
RatHoTactic
N/A
N/A
utranCell
ScenarioType[40] N/A
N/A
utranCell
ServHoSwch
N/A
N/A
utranCell
SoftHoMth
N/A
N/A
utranCell
TrfCatInterMIdx
N/A
N/A
utranCell
TrfCatIntraMIdx
N/A
N/A
utranCell
TrfCatRatMIdx
N/A
N/A
utranCell
UlBlerHoSwch
N/A
N/A
utranCell
UlPwrHoSwch
N/A
N/A
utranCell
UseOfHCS
Use of HCS
TS 25.331: "RRC
utranCell
IfOrRatHoSwch
N/A
N/A
utranRelation
CellIndivOffset
Cell Individual
Offset
TS 25.331: "RRC
utranRelation
MeasPrio
N/A
utranRelation
PenaltyTimeSib1
Penalty_time
1
utranRelation
PenaltyTimeSib1
Penalty_time
2
utranRelation
QhcsEcN0Sib11
Qhcs
utranRelation
QhcsEcN0Sib12
Qhcs
utranRelation
QhcsRscpSib11
Qhcs
utranRelation
QhcsRscpSib12
Qhcs
utranRelation
utranRelation
utranRelation
utranRelation
N/A
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
utranRelation
Sib11orSib11bis
N/A
TS 25.331: "RRC
utranRelation
StateMode
N/A
N/A
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
Procedures in Idle
Mode"
utranRelation
1
1
utranRelation
2
1
utranRelation
1
2
utranRelation
2
2
utranRelation
UseOfHCS
Use of HCS
TS 25.331: "RRC
plBal
LdBalCeSwch
N/A
N/A
plBal
LdBalBwSwch
N/A
N/A
plBal
ExtraDeltaHsuTrd N/A
N/A
plBal
UlLdBalHsuWeig
N/A
ht
N/A
plBal
UlLdHsThdHsu
N/A
N/A
plBal
UtraUserNumOff N/A
N/A
plBal
CoGsmUserNum
N/A
Off
N/A
plBal
GsmUserNumOff N/A
N/A
plBal
GsmCelCariNum N/A
N/A
QosSeg
HspaEquHsUser[
N/A
MAX_BP]
N/A
rncLocRnc
ServHoInd
N/A
N/A
rncLocRnc
AmrServHoStra
N/A
N/A
rncLocRnc
Cs64ServHoStra N/A
N/A
rncLocRnc
PsRtServHoStra
N/A
N/A
rncLocRnc
PsNrtServHoStra N/A
N/A
rncLocRnc
RncPsHoLteSw
N/A
N/A
rncLocRnc
RncSrvccSw
N/A
N/A
rncBRnc
R99RtEutraHoSw
N/A
ch
N/A
rncBRnc
R99NrtEtraHoSw
N/A
ch
N/A
rncBRnc
HsdpaEutraHoSw
N/A
ch
N/A
rncBRnc
HsupaEutraHoSw
N/A
ch
N/A
utranCell
ChoStraMulRatH
N/A
o
N/A
rncFunction
EcN0ThrAddNRL
N/A
SHO
N/A
rncFunction
RSCPThrAddNR
N/A
LSHO
N/A
utranCell
MulMdUtranCelIn
N/A
d
N/A
utranCell
AddNRLSHOSwc
N/A
h
N/A
MulMdCelLd
RtwpLoadLowTh
N/A
d
N/A
MulMdCelLd
RtwpLoadMidThd N/A
N/A
MulMdCelLd
RtwpLoadHighTh
N/A
d
N/A
MulMdCelLd
TCPLoadLowThd N/A
N/A
MulMdCelLd
TCPLoadMidThd N/A
N/A
MulMdCelLd
TCPLoadHighTh
N/A
d
N/A
MulMdCelLd
CodeLoadLowTh
N/A
d
N/A
MulMdCelLd
CodeLoadMidThd N/A
N/A
MulMdCelLd
CELoadLowThd
N/A
N/A
MulMdCelLd
CELoadMidThd
N/A
N/A
MulMdCelLd
DPAUNumLowTh
N/A
d
N/A
MulMdCelLd
DPAUNumMidTh
N/A
d
N/A
MulMdCelLd
UPAUNumLowTh
N/A
d
N/A
MulMdCelLd
UPAUNumMidTh
N/A
d
N/A
MulMdCelLd
MBMSUNumLow
N/A
Thd
N/A
MulMdCelLd
MBMSUNumMid
N/A
Thd
N/A
MulMdCelLd
SigUNumLowThd N/A
N/A
MulMdCelLd
SigUNumMidThd N/A
N/A
utranCell
HoCelSelScene
N/A
N/A
utranCell
CellRadiusScene N/A
N/A
CIntra
HoCelSelScene
N/A
N/A
CInter
HoCelSelScene
N/A
N/A
CRat
HoCelSelScene
N/A
N/A
EUtranCell
DlEARFCN
N/A
N/A
EUtranCell
UlEARFCN
N/A
N/A
EUtranCell
EutranMeasBand N/A
N/A
rncFunction
RabMeaBalStaS
N/A
wch
N/A
rncFunction
CoverMeaBalSwc
N/A
h
N/A
utranCell
SimCompUserNu
N/A
m
N/A
rncFunction
MeasBalTimer
N/A
N/A
utranCell
EcNoQualThrd
N/A
N/A
utranCell
RscpQualThrd
N/A
N/A
PriSel
ThresServingLow Threshserving,
2
low2
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
DivPc
TS 25.304: "UE
Procedures in Idle
Mode"
TS 25.331: "RRC
TS 25.304: "UE
EutranLowThres2
Procedures in Idle
[MAX_NUM_EUT Threshx, low2
Mode"
RAN_FREQ]
TS 25.331: "RRC
TS 25.304: "UE
QqualminEUTRA
Procedures in Idle
[MAX_NUM_
QqualminEUTRA Mode"
EUTRAN
TS 25.331: "RRC
_FREQ]
TS 25.304: "UE
ThreshRsrqInd
Procedures in Idle
[MAX_NUM_EUT N/A
Mode"
TS
RAN_FREQ]
TS 25.331:
25.331: "RRC
"RRC
Protocol
Specification"
Modification
Interface NBAP
MbmsModPrdCo period coefficient; Signalling"
eff
Modification
TS 25.346: "Introduction
Period
of the Multimedia
Broadcast Multicast
Service (MBMS) in the
Radio Access Network"
SrvType
N/A
N/A
Drbc
ETtiEaThd
N/A
N/A
Drbc
ETtiEbThd
N/A
N/A
Drbc
EttiTraffVolSwch
N/A
N/A
Hspa
DtxDrxSwch
N/A
N/A
HarqRvConfig
TS 25.331: "RRC
HARQ RV
Configuration;
Interface NBAP
HARQ Info for E- Signalling"
DCH
interface RNSAP
signalling"
PriSel
PriSel
PriSel
PriSel
CnInfo
rncFunction
EutranHighThres
2
Threshx, high2
[MAX_NUM_EUT
RAN_FREQ]
Hspa
HsscLessSwch
N/A
N/A
rncFunction
MaxRateWithNV
N/A
Hs
N/A
Hspa
NrtDtxDrxSwch
N/A
N/A
Hspa
NVHsscLessSwc
N/A
h
N/A
Hspa
RtDtxDrxSwch
N/A
N/A
LdCtrl
DecGbrSw
N/A
N/A
LdCtrl
MaxGbrDecNum N/A
N/A
Mbms
MbmsIubMultSwc
N/A
h
N/A
Mbms
MbmsMinRate
N/A
N/A
Mbms
T318
T318
TS 25.331: "RRC
Cell identity
C-ID
TS 25.331: "RRC
Interface NBAP
Signalling"
Pich
CId
CPCId
Common
ID
Signalling"
Pich
Np
TS 25.331: "RRC
Number of PI per Protocol Specification";
frame; PICH
Mode
Interface NBAP
Signalling"
utranCell
Ul16QamSwi
N/A
N/A
utranCell
Ul16QamSwi
N/A
N/A
Pich
rncDtxDrx
CqiDtxTimer
rncDtxDrx
DpcchBurst1
rncDtxDrx
DpcchBurst2
rncDtxDrx
DrxCycInactTrd
rncDtxDrx
DrxCycle
rncDtxDrx
DrxGrantMon
rncDtxDrx
DtxCyc1Tti10
TS 25.331: "RRC
interface RNSAP
CQI DTX Timer
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
UE DPCCH
interface RNSAP
burst_1
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
UE DPCCH
interface RNSAP
burst_2
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
Inactivity
interface RNSAP
Threshold for UE
signalling"
DRX cycle
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
UE DRX cycle
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
UE DRX Grant
interface RNSAP
Monitoring
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
UE DTX cycle 1
signalling"
Interface NBAP
Signalling"
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
rncDtxDrx
TS 25.331: "RRC
interface RNSAP
DtxCyc1Tti2
UE DTX cycle 1
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
Inactivity
DtxCyc2InactTrd1
interface RNSAP
Threshold for UE
0
signalling"
DTX cycle 2
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
Inactivity
interface RNSAP
DtxCyc2InactTrd2 Threshold for UE
signalling"
DTX cycle 2
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
DtxCyc2Tti10
UE DTX cycle 2
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
DtxCyc2Tti2
UE DTX cycle 2
signalling"
Interface NBAP
Signalling"
DtxDrxConfigIdx
N/A
N/A
TS 25.331: "RRC
UE DTX long
interface RNSAP
DtxLongPreLegth
preamble length signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
Inactivity
GrantMonInactTr
interface RNSAP
Threshold for UE
d
signalling"
Grant Monitoring
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
MacDtxCycTti10 MAC DTX Cycle
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
interface RNSAP
MacDtxCycTti2
MAC DTX Cycle
signalling"
TS
Iub
TS 25.433:
25.331: "UTRAN
"RRC
Interface
NBAP
Signalling"
MAC Inactivity
interface RNSAP
MacInactThresh
Threshold
signalling"
Interface NBAP
Signalling"
rncLocRnc
DlLowLimNegGB
N/A
R
rncFunction
KUtran
rncLocRnc
NegGBRLevNum N/A
N/A
rncLocRnc
QosNegRenegS
wi
N/A
N/A
rncLocRnc
UlLowLimNegGB
N/A
R
N/A
Sccpch
CPCId
Common
ID
Signalling"
Sccpch
SccpchOffset
Timing Offset;
FDD SCCPCH
Offset
Sccpch
SccpchUsage
N/A
Sccpch
Sib5OrSib6
N/A
Sccpch
SttdInd
STTD indicator;
STTD Indicator
Direction
RAB Asymmetry
Indicator;
Unidirectional
DCH Indicator
SubSrv
UTRAN DRX
cycle length
coefficient
N/A
TS 25.331: "RRC
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.331: "RRC
Interface NBAP
Signalling"
TS 25.331: "RRC
Protocol
Specification"
TS 25.331:
"RRC
Interface NBAP
Signalling"
of
channelsIu
TStransport
25.413: "UTRAN
onto
physical
channels
Interface RANAP
(FDD)"
Signalling"
interface RNSAP
signalling"
SubSrv
Domain
Interface RANAP
Signalling"
CN Domain Type
interface RNSAP
signalling"
SubSrv
MaxBitRate
Maximum Bit
Rate
Interface RANAP
Signalling"
SubSrv
MbmsInd
Transmission
Mode

interface RNSAP
signalling"
SubSrv
SrvType
N/A
N/A
SubSrv
TrafficClass
Traffic Class
Interface RANAP
Signalling"
interface RNSAP
signalling"
utranCell
Supt64QamInd
N/A
N/A
utranCell
Tti2msSuptInd
N/A
N/A
Pich
SccpchCPCId
Common
ID
Signalling"
SubSrv
MinBitRate
N/A
N/A
E-DCH
Transmission
Time Interval; ETTI
TS 25.331: "RRC
Interface NBAP
Signalling"
interface RNSAP
signalling"
rncFunction
ETTIComEdch
rncFunction
UlLchTypeInd[DB
S_RR_MAX_NU
N/A
M_CEDCH_LOGI
CALCHANNEL]
N/A
rncFunction
rncFunction
rncFunction
rncFunction
rncFunction
rncFunction
CEdchHarqPOTti
2
[DBS_RR_MAX_
NUM_CEDCH_L
OGICALCHANN
EL]
CEdchHarqPOTti
10
[DBS_RR_MAX_
NUM_CEDCH_L
OGICALCHANN
EL]
CEdchMaxRetrTti
2
[DBS_RR_MAX_
NUM_CEDCH_L
OGICALCHANN
EL]
CEdchMaxRetrTti
10
[DBS_RR_MAX_
NUM_CEDCH_L
OGICALCHANN
EL]
CEdchMaxRlcSiz
e[DBS_RR_MAX
_NUM_CEDCH_
LOGICALCHANN
EL]
CEdchMinRlcSiz
e[DBS_RR_MAX
_NUM_CEDCH_
LOGICALCHANN
EL]
E-DCH MAC-d
flow power offset;
E-DCH HARQ
Power Offset
FDD
E-DCH MAC-d
flow power offset;
E-DCH HARQ
Power Offset
FDD
E-DCH MAC-d
flow power offset;
E-DCH HARQ
Power Offset
FDD
E-DCH MAC-d
flow power offset;
E-DCH HARQ
Power Offset
FDD
Largest UL RLC
PDU size
TS 25.331: "RRC
Interface NBAP
Signalling"
TS
Iur
TS 25.423:
25.331: "UTRAN
"RRC
interface
RNSAP
signalling"
Interface NBAP
Signalling"
TS
Iur
TS 25.423:
25.331: "UTRAN
"RRC
interface
RNSAP
signalling"
Interface NBAP
Signalling"
TS
Iur
TS 25.423:
25.331: "UTRAN
"RRC
interface
RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
TS 25.331: "Radio
TS 25.331: "Radio
Minimum UL RLC
PDU size
rncFunction
CEdchMultiSwi
N/A
N/A
rncFunction
UlEfachSF
N/A
N/A
Efach
UlEfachMaxrate
N/A
N/A
SubSrv
DtxDrxConfigIdx
N/A
N/A
Prach
RachCTCId
Common
Transport
Channel ID

Interface NBAP
Signalling"
Transmission
time interval;
Transmission
Time Interval
TS 25.331: "RRC
Interface NBAP
Signalling"
Prach
RachTti
externalUtranCell
Ul16QamSuppInd N/A
N/A
utranCell
SccpchCfgScene N/A
N/A
rncFunction
BwOvldRelUeNu
N/A
m
N/A
SysMC
TRFVOLMEASC
N/A
FGNO
N/A
UtranCell
CchFactor
N/A
N/A
rncFunction
AMRGbrResInd
N/A
N/A
externalUtranCell
AdjClassZoneInd N/A
N/A
NdbPort
NodebNo
N/A
N/A
NdbPort
ANI
N/A
N/A
NdbPort
LinkId1
N/A
N/A
NdbPort
LinkId2
N/A
N/A
NdbPort
LinkId3
N/A
N/A
NdbPort
Link1BrsType
N/A
N/A
NdbPort
Link2BrsType
N/A
N/A
NdbPort
Link3BrsType
N/A
N/A
NdbPort
UseType
N/A
N/A
NdbPort
CCPId
N/A
N/A
NdbPort
OutStreamId
N/A
N/A
EUtranCell
EutranCellType
N/A
N/A
IdnnsMap
StartIdNnsValue
N/A
N/A
IdnnsMap
EndIdNnsValue
N/A
N/A
rncFunction
RouteTypeUEBas
N/A
ed
N/A
ImsiMap
ImsiMaskFlag
N/A
N/A
ImsiMap
ImsiMatchedDigit N/A
N/A
ImsiMap
ImsiMapRuleNo
N/A
N/A
rncLocRnc
PsL2USwchByCs N/A
N/A
ImsiMap
CSPoolId
N/A
N/A
ImsiMap
PSPoolId
N/A
N/A
IdnnsMap
CSPoolId
N/A
N/A
IdnnsMap
PSPoolId
N/A
N/A
utranCell
VirtualLac
[2]
N/A
N/A
rncFunction
VLacPaingInd
N/A
N/A
rncFunction
MBMSRATESWI
N/A
TCH
N/A
rncFunction
MRUeIniCallLoc
Mode
N/A
N/A
rncFunction
MRUePrdLocMod
N/A
e
N/A
rncFunction
TWaitCelUpRlDa
N/A
ct
N/A
rncFunction
POWhiteListUser N/A
N/A
WhiteTrfPc
SrvType
N/A
N/A
WhiteTrfPc
UlSirTargUpStep N/A
N/A
WhiteTrfPc
UlSirTargDnStep N/A
N/A
WhiteTrfPc
MaxSirTargDnSte
N/A
p
N/A
WhiteTrfPc
SwchAdaptiveSte
N/A
p
N/A
WhiteTrfPc
MaxDlDpchPwr

Interface NBAP
Maximum DL
Signalling"
Power; Maximum
DL TX Power
interface RNSAP
signalling"
WhiteTrfPc
MinDlDpchPwr
Minimum DL
Power

Interface NBAP
Signalling"
interface RNSAP
signalling"
WhiteTrfPc
DpcchPilotEbN0
N/A
N/A
WhiteTrfPc
MaxUlDpchPwr
Maximum
allowed UL TX
power; Maximum
Allowed UL Tx
Power
WhiteTrfPc
ULInitSIR
UL SIR Target
TS 25.331: "RRC
interface RNSAP
signalling"
Interface NBAP
Signalling"
interface RNSAP
signalling"
WhiteTrfPc
ULMaxSIR

Maximum Uplink
interface RNSAP
SIR
signalling"
WhiteTrfPc
ULMinSIR
Minimum Uplink
SIR

interface RNSAP
signalling"
WhiteTrfPc
BLERtarget
BLER Quality
value; BLER
TS 25.331: "RRC
interface RNSAP
signalling"
WhiteTrfPc
ErrorThresh
N/A
N/A
WhiteTrfPc
BLERAccpPeriod N/A
N/A
WhiteTrfPc
ErrorThreshHLd
N/A
N/A
WhiteTrfPc
BLERAccpPerHL
N/A
d
N/A
BLER Quality
value; BLER
TS 25.331: "RRC
interface RNSAP
signalling"
WhiteTrfPc
BLERtargetHLd
WhiteTrfPc
ThrHarqFailTti10[
N/A
3]
N/A
WhiteTrfPc
ThrHarqFailTti2[3
N/A
]
N/A
WhiteTrfPc
NhrThrDownTti10
N/A
[3]
N/A
WhiteTrfPc
NhrThrUpTti10[3] N/A
N/A
WhiteTrfPc
UpThrSampNuTti
N/A
10[3]
N/A
WhiteTrfPc
DwThrSampNuTti
N/A
10[3]
N/A
WhiteTrfPc
NhrThrDownTti2[
N/A
3]
N/A
WhiteTrfPc
NhrThrUpTti2[3]
N/A
N/A
WhiteTrfPc
UpThrSampNum
N/A
Tti2[3]
N/A
WhiteTrfPc
DwThrSampNum
N/A
Tti2[3]
N/A
WhiteTrfPc
UlOlPcQESwchSi
N/A
l
N/A
WhiteTrfPc
QePhyBerTarSil
N/A
N/A
WhiteTrfPc
QeCntThres
N/A
N/A
WhiteTrfPc
WhiteList
TS 25.331: "RRC
E-DCH MAC-d
flow power offset;
EdchHarqPOFdd[
Interface NBAP
E-DCH HARQ
3]
Signalling"
Power Offset
FDD
interface RNSAP
signalling"
VipCsReDelayTi
N/A
N/A
mer
WhiteList
VipPsReDelayTi
mer
N/A
N/A
WhiteList
ImsiDgtNum
N/A
N/A
WhiteList
ImsiDgt[15]
N/A
N/A
WhiteList
VipInd
N/A
N/A
WhiteList
BasicPrio
N/A
N/A
WhiteList
HspaSchPrio
N/A
N/A
WhiteList
CgtSchPrio
N/A
N/A
WhiteList
AppPri
N/A
N/A
rncFunction
DropForVipSwitc
N/A
h
N/A
rncFunction
VipEstNtfSwitch
N/A
N/A
rncFunction
VipEstNtfNbrPrio N/A
N/A
rncFunction
WhtLstSwitch
N/A
N/A
TrfPc
UlOlPcQESwchSi
N/A
l
N/A
rncFunction
VipInfoReqPrd
N/A
N/A
PlBal
RrcHsLdBaOnDc
N/A
hSw
N/A
rncFunction
SirUpAddStep
N/A
N/A
rncFunction
ValidTimTbCovPr
N/A
d
N/A
TrfPc
MaxSirTargUpSte
N/A
p
N/A
WhiteTrfPc
MaxSirTargUpSte
N/A
p
N/A
utranCell
CsReestSwitch
N/A
N/A
utranCell
PsReestSwitch
N/A
N/A
rncFunction
IurPwrCtlReqSwc
N/A
h
N/A
rncFunction
IurEcNoDelta
N/A
N/A
rncLocRnc
CsPlusPsSwch
N/A
N/A
rncLocRnc
R6MulRabRcfgM
N/A
eth
N/A
rncFunction
GRESPARA41
N/A
N/A
rncFunction
GRESPARA42
N/A
N/A
rncFunction
GRESPARA43
N/A
N/A
rncFunction
GRESPARA44
N/A
N/A
rncFunction
GRESPARA45
N/A
N/A
rncFunction
GRESPARA46
N/A
N/A
rncFunction
GRESPARA47
N/A
N/A
rncFunction
GRESPARA48
N/A
N/A
rncFunction
GRESPARA49
N/A
N/A
rncFunction
GRESPARA50
N/A
N/A
rncFunction
GRESPARA51
N/A
N/A
rncFunction
GRESPARA52
N/A
N/A
rncFunction
GRESPARA53
N/A
N/A
rncFunction
GRESPARA54
N/A
N/A
rncFunction
GRESPARA55
N/A
N/A
rncFunction
GRESPARA56
N/A
N/A
rncFunction
GRESPARA57
N/A
N/A
rncFunction
GRESPARA58
N/A
N/A
rncFunction
GRESPARA59
N/A
N/A
rncFunction
GRESPARA60
N/A
N/A
UeTrv
ThoughThres
N/A
N/A
PlBal
dREcNoQualThrd N/A
N/A
PlBal
dRRscpQualThrd N/A
N/A
rncFunction
LocModeSwch
N/A
N/A
rncFunction
VipSpecFreqSwc
N/A
h
N/A
rncFunction
VipDlArfcnInd
N/A
N/A
utranCell
CsNumThrd1
N/A
N/A
utranCell
PsNumThrd1
N/A
N/A
utranCell
CsNumThrd2
N/A
N/A
utranCell
PsNumThrd2
N/A
N/A
rncFunction
VipForcedHoSwc
N/A
h
N/A
rncFunction
ParallelRrcSetup N/A
N/A
NodeB
TWaitNBReach
N/A
N/A
NodeB
TAtmRelLinkPro
N/A
N/A
NodeB
TIpRelLinkPro
N/A
N/A
rncFunction
MrServiceType
N/A
N/A
This parameter indicates the

window endpoint of the
FACH
FP. DL data
frames
GUI Name
Parameter
Description
are expected to be received
before
this window
endpoint.
This parameter
is one
factor
Time
of
Arrival
Window
of the protocal parameter
Endpoint
(ToAWE)
is defined
that indicates
the window
Time of Arrival Window with
a
positive
value
relative
startpoint of the FACH
FP. DL
Endpoint(ms)
Latest
Time
of
Arrival
(LToA).
data frames are expected
to
ToAWS
and after
ToAWE
be received
thistogether
window
define
the Time
size ofofthe
arrival
startpoint.
Arrival
window inStartpoint
Node B. (ToAWS)
A data
Window
arriving
the
Time of Arrival Window frame
is defined
with outside
a positive
arrival
window
gives
a
Timing
This
indicates
the
Startpoint(ms)
valueparameter
relative Time
of Arrival
Adjustment
Control
Frame
transport
time
delay
between
Window Endpoint (ToAWE).
Response
from
Nodetogether
B.
the
rnc and
the
adjacent
ToAWS
and
ToAWE
cell.There
are
three
time
define the size of the arrival
delay
levels:
20ms
window
in Node
B. (Low
A data
Transport Time Delay
Earth
andoutside
Terrestrial
frame Orbit
arriving
the
transmission),
arrival window 100ms
gives a Timing
(Medium
Earth
OrbitFrame
Adjustment
Control
transmission),
400ms
This
parameter
Response
from indicates
Node B. the
This
parameter
indicates
the
(Geostationary
Orbit
window
of the
transportendpoint
delay Earth
jitter
between
transmission).
FACH
FP.and
DL the
dataadjacent
frames
the RNC
Jitter
are
expected
to
be
received
cell. The value of FP
TOAWS
before
this
window
endpoint.
is
related
with
the
parameter.
This parameter is one factor
Time
Arrival Window
of theof
protocal
parameter
Endpoint
(ToAWE)
is defined
that
indicates
the window
Time of Arrival Window
with
a
positive
value
relative
Endpoint(ms) for FACH startpoint of the FACH FP. DL
Latest
Time
of
Arrival
(LToA).
data frames are expected
to
transmission channel
ToAWS
and
ToAWE
together
be received after this window
define
the Time
size ofofthe
arrival
startpoint.
Arrival
This
parameter
window
inStartpoint
Nodeindicates
B. (ToAWS)
A datathe
Window
endpoint
of thethe
PCH
Time of Arrival Window window
frame
arriving
outside
is
defined
with
a positive
FP.
DL
data
frames
are
Startpoint(ms) for FACH arrival window gives a Timing
value
relative
of Arrival
expected
to Control
beTime
received
Adjustment
Frame
Window
Endpoint
(ToAWE).
before
this from
window
endpoint.
This
parameter
is
one
factor
Response
Node
B.
ToAWS
and ToAWE
together
Time
of
Arrival
Window
of
the
protocal
parameter
define the(ToAWE)
size of the
arrival
Endpoint
is defined
indicates
theB.window
Time of Arrival Window that
window
in Node
Arelative
data
with
a
positive
value
startpoint
of the
PCH FP.
Endpoint(ms) for PCH
frame
arriving
outside
theDL
Latest
Time of
Arrival
(LToA).
data
frames
are
expected
to
arrival
window
gives a
Timing
ToAWS
and after
ToAWE
together
be
received
this
window
Adjustment
Control
Frame
define
the Time
size
ofofthe
arrival
startpoint.
Arrival
Response
from
Node
B.
window inStartpoint
Node B. (ToAWS)
A data
Window
Time of Arrival Window frame arriving outside the
is defined with a positive
Startpoint(ms) for PCH arrival window gives a Timing
value relative Time of Arrival
Adjustment
Control(ToAWE).
Frame
Window Endpoint
Response
from
Node
B.
ToAWS and ToAWE together
This
parameter
indicates
define the size of the arrival
whether
IuNode
uplinkB.data
is
window in
A data
IU Uplink in Sequence
delivered
in sequence
based
frame
arriving
outside
the
Delivery Indicator
on
indication
RAB a Timing
arrival
windowofgives
assignment
from CN.
Adjustment Control
Frame
Response
fromidentifiesthe
Node B.
MCC
uniquely
country that the UE users (or
Mobile Country Code
system) belong to. MCC is
allocated uniformly and
internationally.
Instance
Related FG
UTRAN Cell
MBMS /Node B
Management
UTRAN Cell
MBMS /Node B
Management
RAN Transmission
External UTRAN
Overview/Handover
Cell
Control
External UTRAN RAN Transmission

Cell
Overview
RNC
Node B
Management
RNC
Node B
Management
RNC
Node B
Management
RNC
Node B
Management
RNC
IP UTRAN
RNC and PLMN
Basic Identification
Parameter
Mobile Network Code
Physical Adjacent GSM

Cell Identity
Band Indicator
Base Station Colour

Code
BCCH ARFCN
BSC Identifier
Cell Identifier
GERAN Cell Indicator
Location Area Code
Maximum Allowed UL
TX Power(dBm)
Mobile Country Code
MNC identifies a specific

PLMN inside one country
(decided by MCC).
The parameter indicates
physical adjacent GSM cell
identity., it identifies a
neighboring GSM cell
uniquely. One physical cell
corresponds to four logic cell
(MCC+MNC+LAC+CI) at
most.
This parameter identifies
which
frequency
band the
When
the neighboring
cell is
This
parameter
indicates
BCCH
ARFCN
GSM
GSM
cell,
its
BSIC
(Base
BCCH
absolute
neighboring
cell radio
uses
transceiver
Station
Identity
frequency channel
No.
of
Code)
consists
of
NCC
GSM neighboring cell, which
(Network Colour
Code)
and
corresponds
to the
central
BCC
(BaseofStation
Colour
frequency
the carrier
used
Code).
NCC identifies the
by BCCH.
network,
as, different
[512, 885]such
corresponds
to
GSM
networks
Band DCS1800beside the
border.
BCC
identifies the
[512, 812]
corresponds
to
cells that
use the same
Band
PCS1900
BCCH
point.
[0, 124]frequency
and [9575,
1023]
correspond to band GSM900
[259, 293] corresponds to
Band GSM450
This
indicatesto
[306,parameter
340] corresponds
BSC
BandIdentifier,
GSM480 which GSM
Cell
to.
[438,belongs
511] corresponds
to
Band GSM750
[128, 251] corresponds to
This
Bandparameter
GSM850 is
neighboring cell identity, it is
valid only in the LAC where
the cell locates.
This parameter indicates
whether the GSM cell is
GERAN cell
LAC of the neighboring cell
locates. It identifies different
location area. LAC belongs to
LAI (LAI = MCC + MNC +
LAC). One location area
includes many cells.
maximum allowed uplink
transmit power in the GSM
cell.
RNC and PLMN
Parameter
GSM
RAN Sharing
Neighboring Cell
GSM
Adjacent Gsm cell
Neighboring Cell Basic Parameter
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
Handover Control
Neighboring Cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
MCC uniquely identifies the

GSM
Adjacent Gsm cell
internationally.

LAC of the neighboring cell
locates. It identifies different
Mobile Network Code
LAC). One location area
includes many cells.
the neighboring
is
MNC BCD Code Length When
code length
of the MNCcell
BCD
GSM
cell,
its
BSIC
(Base
of the neighboring GSM cell.
transceiver Station Identity
Code) consists of NCC
(Network Colour Code) and
BCC (Base Station Colour
Network Colour Code
Code). NCC identifies the
network, such as, different
GSM networks beside the
border. BCC identifies the
The
indicates
cellsparameter
that use the
same
PLMN Number of
PLMN
number
of point.
Sharing the
BCCH
frequency
Sharing the GSM Cell
GSM cell.
Routing Area Code
Shared Network Area

Code
Shared Network Area

Code Number
Physical Adjacent Cell

Identity
Cell Identity
Closed Loop Mode 1

Support Indicator

RAC of the Gsm cell.
shared network area code
that the neighboring cell
belongs to. One cell can
belong to at most four
SNACs (shared network area
code).
number of shared network
area code that the
neighboring cell belongs to.
physical adjacent cell
identity., it identifies a
neighboring cell uniquely.
One physical cell
at most.
The parameter indicates the
neighboring cell identity,
which is valid only in the RNC
where the cell locates.
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
RAN Sharing
Neighboring Cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
GSM
Adjacent Gsm cell
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
This parameter indicates if

Inter_RNC
External UTRAN
the neighboring cell supports
Adjencent cell
Cell
Closed Loop Mode1.
Basic Parameter

whether continuous packet
CPC DTX-DRX Support
External UTRAN
HSPA Evolution
connectivity DTX-DRX
Indicator
Cell
operation is supported by the
neighboring cell or not.

Max U CPC HS-SCCH whether continuous packet
External UTRAN
less Support Indicator E connectivity HS-SCCH less
HSPA Evolution
Cell
DTX Cycle
operation is supported by the
neighboring cell or not.
DRNC Diversity
Combination Indicator
This parameter defines the

neighboring cell diversity
combination indicator when
the current RNC is DRNC.
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
SRNC Diversity
Combination Indicator

neighboring cell diversity
combination indicator when
the current RNC is SRNC.
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
64QAM DL Support
Indicator
DUARFCN
E-DCH HARQ
Combining Capability

whether the neighboring cell
supports downlink 64QAM or
not.
occupied downlink carrier
central frequency point of the
cell. It is UTRA absolute radio
frequency channel No.,
corresponding to the central
frequency of the carrier used
by
downlinkindicates
channel. the
Thethe
parameter
E-DCH HARQ combining
capability of the neighboring
cell.
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
E-DCH SF Capability

Inter_RNC
External UTRAN
E-DCH SF capability of the
Adjencent cell
Cell
neighboring cell.
Basic Parameter
2ms E-TTI Support

Indicator

Inter_RNC
External UTRAN
Adjencent cell
Cell
E-DCH TTI 2ms.
Basic Parameter
Neighboring Cell
Enhanced F-DPCH
Support Indicator

External UTRAN
HSPA Evolution
Cell
supports Enhanced F-DPCH.
F-DPCH Support
Indicator

supports F-DPCH.
Flexible MAC-d PDU

Size Support Indicator

Inter_RNC
whether the neighboring cell External UTRAN
Adjencent cell
supports flexible MAC-d PDU Cell
Basic Parameter
size or not.
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Frequency Band
Indicator
HSPA Support Method
Location Area Code
Max UE DTX Cycle

(subframes)
RACH Maximum
Allowed UL TX
Power(dBm)
Mobile Country Code
Mobile Country Code
Mimo64Qam Support
Indicator

Inter_RNC
frequency band of the central External UTRAN
Adjencent cell
frequency of the neighboring Cell
Basic Parameter
cell.
Handover Control /
Load Balance
/Admission
supporting
type indicates
of DCH, the External UTRAN
This parameter
Control /HSDPA
HSDPA
andneighboring
HSUPA of the
LAC of the
cell. Cell
Introduction ,
neighboring
cell.is to confirm
This parameter
/HSUPA
the location of the MS. The
Introduction
coverage areas of each
PLMN are divided into many External UTRAN
Handover Control
location areas. LAC identifies Cell
different location area. LAC
belongs
to LAI (LAI
= MCC
This parameter
indicates
the+
MNC
+
LAC).
One
location
maximum UE DTX cycle
area includes
many
cells.
supported
by the
neighboring
External UTRAN
HSPA Evolution
cell for continuous packet
Cell
connectivity DTX-DRX
operation.
This parameter is the
Idle Mode and
maximum allowed RACH
External UTRAN
Common Channel
transmit power of the
Cell
Behavior
neighboring cell.
MCC uniquely identifiesthe
internationally.
internationally.
supports to activate MIMO
and downlink 64QAM at the
same time.

MIMO Support Indicator whether the neighboring cell
supports MIMO or not.
External UTRAN
RAN Sharing
Cell
External UTRAN
RAN Sharing
Cell
External UTRAN parameter for

Cell
future use
External UTRAN
Handover Control
Cell
Mobile Network Code

(decided by MCC).
Primary CPICH
Power(dBm)

Inter_RNC
PCPICH transmission power External UTRAN
Adjencent cell
of the neighboring cell. It is
Cell
Basic Parameter
an absolute value.
External UTRAN
RAN Sharing
Cell
Primary CPICH Power

Configuration Tag
PLMN Number of
Sharing the Cell

whether PCPICH
transmission power is
configured.
PCPICH transmission power
is valid when this parameter
is set "True". Otherwise,
PCPICH transmission power
is invalid.
PLMN number of Sharing the
cell.
The cell primary scrambling

code is used to distinguish
Cell Primary Scrambling This parameter indicates
the cell. There are 512
Code
routing
area
codescrambling
of the
downlink
primary
neighboring
cell.
It
is only
codes in UTRAN totally.
valid when supporting PS
services. The routing area
code identifies one routing
Routing Area Code
area in PLMN of GSM-MAP
type for
packeting
services.
This
parameter
indicates
the
RACdomain
belongs
to RAIarea
(RAIcode
=
BC
service
PLMN-ID
+
LAC
+
RAC).
of
the
neighboring
cell.
RAC is
bycode
the
operator
area
is unique,
RNC Identity of Adjacent Serving
RNC
IDset
of the
neighboring
via
O&M.
belongs
one
or several
cell
cell.RNC
RNCto
ID
is distributed
cells
in theinsame
Location
uniformly
PLMN.
Are (LA). Serving area code
indicates the UE location to
CN. SAC belongs to SAI (SAI
Service Area Code for
= PLMN-ID + LAC + SAC).
BC Domain
This
indicates
SAC parameter
is set by the
operator
whether
SACB
(service
via RNC
O&M. One
cell area
This
parameter
indicates
the
code
for
BC
domain)
contains
one
or
two
SAC:
CS + PS domain service
parameter
is PS
configured
or
One is
CS of
+
area
code
the domain
neighboring
not.
ItService
is
required
to
be
SACs
and
the
other
is
BC
cell.
area
code
SACB Configuration Tag
configured
when
domain SAC.
Onethe
of cell
them
uniquely
identifies
one
or
supports
the
cell
broadcast
must becells
CS +belonging
PS domain
several
to the
service.
Otherwise,
this can
SAC.
of BC Are
domain
same SA
Location
(LA).
parameter
is one
not
required
to
only
contain
cell.
Service
area
code
indicates
be configured.
the
UE location for CN. SAC
CS and PS Domain
belongs to SAI (SAI = PLMNID + LAC + SAC). SAC is set
This
parameter
indicates
by the
operator via
RNC the
shared
network
area
code to
O&M. One cell may belong
that
the
neighboring
cell
one or two SACs: One is CS
Shared Network Area
belongs
to. One
celland
canthe
+ PS domain
SAC
Code
belong
atdomain
most four
other isto
BC
SAC.
SNACs
(shared
network
One of them
must
be CSarea
+
code).
PS domain SAC.
Shared Network Area
number of shared network
Code Number
area code that the
neighboring cell belongs to.
External UTRAN
Handover Control
Cell
External UTRAN
RAN Sharing
Cell
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
External UTRAN Parameter for

Cell
future use

Cell
future use
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
External UTRAN
Handover Control
Cell
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter

Inter_RNC
whether STTD can be used External UTRAN
STTD Support Indicator
Adjencent cell
on the downlink DPCH of the Cell
Basic Parameter
cell.
Support
R5/R6Congestion
Detection Indicator
TUTRAN-GPS
Measurement Support
Indicator
TX Diversity Indicator
URA Identity
URA Number
UUARFCN
Cell Identity

External UTRAN hsupa packet
Cell
scheduling
R5/R6 congestion detection.
This
parameter common
indicates if
TUTRAN-GPS
the
transmit diversity is active
measurement.
in the neighboring cell. It is
decided by PSCH/SSCH
TSTD indicator, PCPICH
STTD indicator and PCCPCH
STTD indicator. Only when
the three indicators are all
This
parameter
indicates
active,
this parameter
will the
be
UTRAN
registration
area ID.
active, otherwise,
this
One
cell can
to at
parameter
willbelong
be inactive.
most four URAs. Different
UEs that reside in this cell
can belong to different URA.
number of UTRAN
registration areas that the cell
belongs
to.
This parameter
indicates the
occupied uplink carrier
by the uplink channel
Cell Identity is valid only in
the RNC where the cell
locates.
This parameter describes the

neighboring relationship of
Share Cover Indication
the serving cell and Gsm
neighboring cell.
neighboring physical GSM
Neighboring Physical
cell identity., it identifies a cell
GSM Cell Identity
corresponds
fourfor
logic cell
Specifies the to
timer
at
most.
Ignoring OVERLOAD.
Timer for Ignoring all
While this timer is running, all
OVERLOAD Messages
OVERLOAD messages or
or Signalling Point
signalling point congested
Congested
information received at the
Information(TigOR)(s)
RNC
are ignored.
Specifies
the timer for not
allowing to increase traffic.
Timer for Not Allowing to
While this timer is running,
Increase Traffic(TinTR)
the RNC is not allowed to
(s)
increase traffic.

Cell
future use
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
UTRAN Cell
Parameter
Handover
GSM
Control /Load
Neighboring Cell
Balance
Gsm Cell
Relation
Adjacent Gsm cell

Basic Parameter
RNC
Iu Flex
RNC
Iu Flex
NodeB Resource Audit

Timer(100ms)
Diversity Control Field
NodeB No.
NodeB Type
Support R5/R6
Congestion Detection
Indicator

Jitter(ms)
Number of FDD UMTS

Frequency Range
Number of GSM BA
Range
GSM Lower Range
GSM Upper Range

audit timer of Node B
When
there
exists a to
radio
resource.
According
the
Node B
link
and
needs
to
build
timer, RNC audits resource in
another
radio link, this
Node B periodly.
parameters indicates whether
the current radio link and the
existing radio link will be
Node B
combined in Node B. If they
are combined, the radio link
will use the Iub inferface
resource of the existing radio
This
parameter
indicates
link and
not setup
new FPthe
Node
B number,
which is
Node B
connection
any more.
valid in RNC.

Node B
Node B type.

whether Node B supports
This
parameter
indicates
R5/R6
congestion
detection.
theIub inferface satellite
transport delay.There are
three time delay levels: 20ms
(Low Earth Orbit and
Terrestrial transmission),
100ms (Medium Earth Orbit
transmission),
250ms
This
parameter
indicates
the
This
parameter Earth
indicates
the
(Geostationary
Orbit
Iub interface
transport
delay
number
of
UTRAN
FDD
transmission).
jitter.
Radiorange
network
lay userfrequency
controlled
plane
will
add
jitter
to
by the local PLMN.
TOAWS
FP SETUP
This
indicates
Whenparameter
UEincomes
back to the
idle
procedure.
number
of
GSM
BCCH
mode from RRC connected
distribution
tables. one
When
mode, UE selects
cell to
UTRAN
networkcontains
and BSSthis
reside. UTRAN
network
belong
tomessage
the same
parameter
in theindicates
of
This parameter
the
PLMN
at the
same
timeofand
RRC CONNECTION
frequency
lower
range
a
UE
has transferred
RELEASE,
indicating
theRRC
specific
GSM
BCCHfrom
connected
mode
to
Idle
possible frequency
range
distribution
table that
the in
mode,
UE
will
selects
one
UTRAN
cells.
This
parameter
local
PLMN
controls.
When
cell
to
reside.
UTRAN
helps
UE
to
speed
up
theThe
UTRAN
networkindicates
and BSS
This
parameter
contains
this
parameter
in
process
of
cell
searching.
network belong
torange
the same
frequency
upper
of a
the
message
of RRC
PLMN
at
the
same
time
and
specific
GSM BCCH
CONNECTION
RELEASE,
UE
has
transferred
from
RRC
distribution
table
that the
indicating
the
possible
BCCH
connected
mode
to
Idle
local
PLMNrange
controls.
frequency
of When
mode,
UE
will selects
one
UTRAN
network
and
BSS
neighboring
GSM
cells
of the
cell
to
reside.
UTRAN
network
belongThis
to the
same
BSS network.
parameter
contains
this
parameter
in
PLMN
at the
same up
time
and
helps
UE
to speed
the
the
message
of
RRC
UE
has
transferred
from
process
of cell searching.RRC
CONNECTION
connected modeRELEASE,
to Idle
indicating
BCCH
mode, UE the
will possible
selects one
frequency
range
of
cell to reside. UTRAN
neighboring
cells ofinthe
contains
thisGSM
parameter
BSS
network.of
This
parameter
the message
RRC
helps
UE
to
speed
up
the
CONNECTION RELEASE,
process
of
cell
searching.
indicating the possible BCCH
frequency range of
neighboring GSM cells of the
BSS network. This parameter
helps UE to speed up the
process of cell searching.
Node B
Node B
Node B
Node B
Management
Node B
Management
Parameter
Parameter
hsupa packet
scheduling
RAN Transmission
Overview
/Handover
Control /HSUPA
Packet
Scheduling/Admissi
on Control
RAN Transmission
Overview /HSUPA
Packet Scheduling
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
Integrity Protection
Algorithm
UARFCN (Nlow)
Maximum Number of
Retransmissions of the
RRC CONNECTION
RELEASE COMPLETE
Message(N308)
Maximum Number of
RRC CONNECTION
RELEASE Message
UARFCN (Nupper)
Location Area Code
MCC
MNC
Shared Network Area

Code
Extend Information
Extend Information
Digits Num

This
parameter
frequency
lowerindicates
range of the
a
integrity
protection
algorithm
specific UTRAN FDD
that
RNC supports.
At
frequency
that the local
present,
UIA1
and
UIA2
PLMN controls. When UE
algorithm
is supported.
state
is transferred
from RRC
connected mode to idle
mode, UE selects one cell to
reside. UTRAN contains this
parameter in the message of
RRC CONNECTION
RELEASE,
indicating
the the
This parameter
indicates
possible
transmission
maximum number of
frequency
range of
of the
the RRC
retransmissions
UTRAN
cells.
This
parameter
CONNECTION RELEASE
helps
UE to speed up the
COMPLETE.
process
of cell searching.
This parameter
indicates the
This parameter
frequency
upperindicates
range of the
a
maximum
number
of that the
specific UTRAN
FDD
retransmissions
of theWhen
RRC
local PLMN controls.
CONNECTION
RELEASE.
UE state is transferred from
RRC connected mode to idle
mode, UE selects one cell to
reside. UTRAN contains this
parameter in the message of
RRC CONNECTION
RELEASE, indicating the
possible
transmission
This parameter
identifies
frequency
range of
the LAC
different
location
area.
UTRAN
belongs cells.
to LAIThis
(LAIparameter
= MCC +
helps
to speed up the
MNC +UE
LAC).
process of cell searching.
MCC uniquely identifies the
country that the mobile users
(or system) belong to. MCC
is allocated uniformly and
internationally.
(decided by MCC).
RNC and PLMN
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control

shared
network indicates
area code
This
parameter
that
theoflocation
area
values
the extend
RNC
belongs
to.
One
LAC
can in
information digits included
belong
at most
SNAC
MSIN oftoIMSI.
Thefour
extend
(shared
network
area
code).
information means several
high-bit
digits of indicates
MSIN, the
This
parameter
includes
the
number
number of
the
extendof digits RNC
and
values of
these
digits. in
information
digits
included
UEs
with
same
MCC
and
MSIN of IMSI. The extend
MNC
can
be
have
different
information means several
authorization.
The
digits
high-bit digits of
MSIN,
number of
extend
information
includes
the
number
of digits
RNC
must
be same
for each
and values
of these
digits.
MCC+MNC.
UEs with same MCC and
MNC can be have different
authorization. The digits
number of extend information
must be same for each
MCC+MNC.
Handover Control
Handover Control
Handover Control

MCC included in IMSI. MCC
uniquely identifies the
MCC
internationally.
MNC included in IMSI. MNC
MNC
identifies a specific PLMN
inside one country (decided
by MCC).
MCC of network that is
shared by UEs having same
MCC of Shared Network
MCC+MNC+ Extend
Information Digits Num+
Extend
Information.
The parameter
indicates
MNC of network that is
shared by UEs having same
MNC of Shared Network
MCC+MNC+ Extend
Extend Information.
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
Pathloss Scenario

UTRAN Cell
scenario of the serving cell.
Closed Loop Mode 1

Support Indicator

whether closed loop mode1
is supported in the cell.
UTRAN Cell and

Function Switch
PLMN
Common PLMN
Indicator

whether the PLMN is the
common PLMN of the cell.
UTRAN Cell
CS Domain Specific
Access Class N Barred
Indicator
DUARFCN
Cell F-DPCH Support

Indicator
Frequency Band
Indicator
The parameter is CS domain

specific access class N
barred indicator (N=0...15)
occupied downlink carrier
by the downlink channel.
whether the cell supports FDPCH.
Admission Control
RAN Sharing
UTRAN Cell and Domain Specific

PLMN
Access Restriction
UTRAN Cell
Node B
Management
Utran Cell
HSPA Evolution

frequency band of the central UTRAN Cell
frequency of the cell.
Node B
Management
HSPA Support Method
Location Area Code
Local Cell Identity
Cell Maximum
Transmission
Power(dBm)
Handover
Control /Load
Balance /Admission
UTRAN Cell and
Control /HSDPA
PLMN
Introduction
/HSUPA
Introduction
Handover
UTRAN Cell
Control
/MULTIPLMN

support
of DCH,indicates
HSDPA and
This parameter
the
HSUPA
in
the
cell.
LAC of the cell. It is used to
determine the location of the
MS. The coverage area of
each PLMN is divided into
many location areas. LAC is
used to identify different
The
local
ID represents
LAC).
Onecell
location
area
resources
in thecells.
Node B that
includes many
UTRAN Cell
can be used for the
configuration of a cell.
maximum value for the linear
sum of the power of all
UTRAN Cell
downlink physical channels,
which is allowed to be used
in a cell.

Support MBMS Indicator whether MBMS is supported
in the cell.
UTRAN Cell
Node B
Management
Admission
Control /Node B
Management
Handover Control
Mobile Country Code

UTRAN Cell and
RAN Sharing
PLMN
internationally.
Mobile Network Code

(decided by MCC).
CMP Module Number
This parameter is the module

No. of RCP in which the cell UTRAN Cell
locates.
NodeB Number
N_INSYNC_IND
N_OUTSYNC_IND
When
the radio is
link
set
is in
This parameter
the
NodeB
the
No. out-of-sync
of the cell. state, after
When
theN_INSYNC_IND
radio link set is in
receiving
the
in-sync state,
successive
in-syncNode B
shall
start timer
indications
Node B shall
T_RLFAILURE
after
trigger the RL Restore
receiving
N_OUTSYNC_IND
procedure and indicate which
consecutive
radio link setout-of-sync
has reindications.
B shall stop
established Node
synchronisation.
and
reset
When
the timer
RL Restore
T_RLFAILURE
upon the
procedure is triggered,
receiving
successive
state of the
radio link set
N_INSYNC_IND
in-sync
change to the in-sync
state.
indications. If T_RLFAILURE
expires, Node B shall trigger
the RL Failure procedure and
indicate which radio link set
is out-of-sync. When the RL
Failure procedure is
triggered, the state of the
radio link set change to the
out-of-sync state.
UTRAN Cell and

RAN Sharing
PLMN
UTRAN Cell
Parameter
Parameter
UTRAN Cell and Node B

PLMN
Management

PLMN
Management
Sending Times of
Paging Message

maximum times for a paging UTRAN Cell
message to be sent.

PCCPCH Information in whether PCCPCH
SIB6 Configuration Tag Information is configured in
SIB6.
PLMN Number of
Sharing the Cell
UTRAN Cell
Connection
Management

PLMN number of Sharing the UTRAN Cell
cell.
RAN Sharing

whether dynamic persistence
level information of SIB6
PRACH is configured in
SIB7.
The cell primary scrambling
code is used to distinguish
Cell Primary Scrambling
the
There are
512 the
Thiscell.
parameter
indicates
Code
downlink
primary
scrambling
routing area code of the cell.
codes
in valid
UTRAN
totally.
It
is only
when
supporting PS services. The
routing area code identifies
Routing Area Code
one routing area in PLMN of
GSM-MAP type, for packet
This
parameter
indicates
services.
RAC belongs
to the
BC
domain
service
area
code
RAI (RAI = PLMN-ID + LAC
+
of
the
cell.
Service
area
code
The
parameter
indicates
RAC).
RAC is set
by the the
uniquely
identifies
one ID
or is
RNC Identity of UTRAN is
RNC
ID of
cell.O&M.
RNC
operator
viathe
RNC
several
cells
in the same
cell
distributed
uniformly
in
Location
PLMN. Area (LA). Service
area code is to indicate the
UE location to CN. SAC
belongs to SAI (SAI = PLMNService Area Code for
ID + LAC + SAC). SAC is set
BC Domain
This
parameter
indicates
by the
operator via
RNC
whether
SACB
(service area
O&M. One
cell contains
one
This
parameter
code
for
BC domain)
or two
SAC:
Oneindicates
is CS + CS
PS
+
PS domain
service
parameter
is configured
or is
domain
SAC
and
the area
other
code
cell. Service
not.domain
Itofis the
required
to
be of area
SAC.
One
SACB Configuration Tag BC
code
uniquely
identifies
configured
when
the
cellone
them must be CS + PS
or
several
cells
belonging
supports
the
cell
broadcast
domain SAC. SA of BC to
the
same
Location
Area
service.
Otherwise,
this (LA).
domain
can
only contain
one
Service
area
code
is
to to
parameter
is not required
cell.
indicate
the UE location for
be configured.
CN. SAC belongs to SAI (SAI
CS and PS Domain
= PLMN-ID + LAC + SAC).
SAC is set by the operator
via RNC O&M. One cell may
belong to one or two SAC:
This
parameter
the sector
One is
CS + PSisdomain
SAC
Sector Identity
identity
of
the
cell.
and the other is BC domain
SAC. One of them must be
CS + PS domain SAC.
Dynamic Persistence
Level Information of
SIB6 PRACH in SIB7
Configuration Tag
Connection
Management
UTRAN Cell
Connection
Management
UTRAN Cell
Node B
Management /Code
allocation
UTRAN Cell
MULTIPLMN
UTRAN Cell
Parameter
UTRAN Cell
CBS
UTRAN Cell
CBS
UTRAN Cell
CBS
UTRAN Cell
Parameter
Multi-User Detection
Support Indicator

whether multi-user detection
is supported in the cell.
SIB12 Indicator

whether SIB12 is broadcast
in the cell.
SIB4 Indicator

whether SIB4 is broadcast in UTRAN Cell
the cell.
SIB6 Indicator

whether SIB6 is broadcast in UTRAN Cell
the cell.

whether STTD can be used
STTD Support Indicator
on the downlink DPCH of the
cell.
timing delay used for defining
the starting time of SCH,
T_Cell
CPICH and the DL
scrambling code(s) in a cell
relative
BFN.
UTRAN to
registration
area ID.
One cell can belong to at
most four URAs
URA Identity
(MAX_URA=4). Different UE
that resides in this cell can
belong to different URA.
number of UTRAN
URA Number
registration areas that the cell
belongs
to.
This parameter
indicates the
occupied uplink carrier
UUARFCN
The
parameter
indicates the
by the
uplink channel.
Access Percent of the
access percent of the PLMN
PLMN for Nonfor non-supporting UEs in a
Supporting UEs(%)
MOCN shared network
configuration
PS Domain Specific
Indicator (N=0...15)
UTRAN Cell
UTRAN Cell
Parameter for
future use
Idle Mode and
Common Channel
Behavior (Cell
Selection/Reselecti
on)
Idle Mode and
Common Channel
Behavior (Cell
Selection/Reselecti
on)
Connection
Management
UTRAN Cell
HSPA Evolution
UTRAN Cell
Node B
Management
UTRAN Cell
Parameter
UTRAN Cell
Parameter
UTRAN Cell
Node B
Management
UTRAN Cell and

RAN Sharing
PLMN
The parameter is PS domain

UTRAN Cell and Domain Specific
specific access class N
PLMN
Access Restriction
barred indicator (N=0...9)
Cell Identity

locates.

Does Neighbouring Cell
whether the neighboring
Belong to Self Physical
physical cell belongs to the
RNC
Self physical RNC.
neighboring physical cell
Neighbouring Physical
identity., it identifies a cell
Cell Identity
at most.
neighboring relationship of
Share Cover Indication
the serving cell and
neighboring cell.
Transport Qos Profile

parameter Index
NE Office Id
Basic Priority Transport

Bearer Type Index

Reserved Bandwidth
Index

parameter Index
Traffic Category
Transport Bearer Type
UTRAN
Neighboring Cell Parameter
Utran Cell
Relation
Parameter
Utran Cell
Relation
Parameter
UTRAN
Handover Control /
Neighboring Cell Load Balance /HCS
Transport layer Qos Profile

parameter mapping Index for
RNC
each Iub/Iur adjacent NE.
NE Office Id
RNC

Bearer Type Index
RNC

Reserved Bandwidth Index
RNC

parameter Index
RNC
Traffic Category
RNC
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
Transport CAC,
MultiPath
Protection on Iub
Interface
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
Transport Bearer Type 1
DSCP for IP
IP DSCP
RNC
RNC
RNC
RNC
RNC
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
RNC
DiffServ,
Uplink Reserved Bandwidth

Uplink Reserved
for I/B Traffic
Bandwidth for I/B Traffic
RNC
Transport CAC,
Downlink Reserved
Downlink Reserved
RNC
Transport CAC,
Mobile Country Code

RNC
internationally.
Parameter
Mobile Network Code

(decided by MCC).
Parameter
RNC

Bearer Type Index
Basic Priority Segment
Radio Bearer Type
DSCP for IP

Reserved Bandwidth
Index

Bearer Type Index
Radio Bearer Type
DSCP for IP

RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
RNC
DiffServ
RNC
Transport CAC
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
Uplink Reserved
Bandwidth for DCH I/B
Traffic

for DCH I/B Traffic
RNC
Transport CAC
Downlink Reserved
Traffic
Downlink Reserved
RNC
Bandwidth for DCH I/B Traffic
Transport CAC
Uplink Reserved
Bandwidth for HSPA I/B
for HSPA I/B Traffic
Traffic
RNC
Transport CAC
Downlink Reserved
Downlink Reserved
Bandwidth for HSPA I/B Bandwidth for HSPA I/B
Traffic
Traffic
RNC
Transport CAC
Mobile Country Code
Mobile Network Code
Shared Network Mode
Tnnsf(s)
Shared Network Area

Code
MSCH Supported
Switch

RNC
internationally.
PLMN
inside one
country the
This parameter
indicates
(decided
by
MCC).
shared network mode. There
are two modes of shared
network: GWCN (Gateway
Core Network) and MOCN
Multi-Operator Core Network.
Both radio access network
and core network are shared
This
parameter
the
in GWCN
mode.indicates
Only radio
maximum
time that
the RNC
access network
is shared
by
may
storemode.
Permanent NAS
in MOCN
UE Identity IE (and the
related Global CN-ID IE)
The
indicates
whenparameter
NNSF is active.
shared network area code of
network that is shared by
UEs having same
MCC+MNC+ Extend
Extend Information.
whether MSCH is supported
or not
RNC
Parameter
RNC
RAN Sharing
RNC
Iu Flex
RNC
Handover Control
RNC
Parameter for
future use
UTRAN Cell
Parameter
UTRAN Cell
Node B
Management
/Connection
Management
Cell ID

locates.
PICH STTD Indicator

whether the PICH uses the
STTD diversity mode or not.
Type of PRACH
Preamble

function of configuration of
PRACH preamble.PRACH
UTRAN Cell
preamble can be used in R99
and common E-DCH.
This parameter is the EE-AGCH Multiplexing

AGCH multiplexing switch in
Switch in Dedicated and
dedicated E-DCH and
Common E-DCH
common E-DCH.
Parameter
UTRAN Cell

RNC DC+MIMO Support whether RNC supports to
RNC
Indicator
activate Dual Cell and MIMO
at the same time.
HSPA Evolution
Code Resource
Allocation
HSPA Evolution
Cell Dual Cell+MIMO

Support Indicator

whether the cell supports to
UTRAN Cell
activate Dual Cell and MIMO
at the same time.

whether the neighbouring cell
of DRNC supports to activate
Dual Cell and MIMO at the
same time.
number of cells updating
Number of Cells
SIB3 when the state of Iu is
Updating SIB3
changed
or when
the DSAR
This
parameter
indicates
switch is the
changed
.
whether
available
subchannel
numbers
are the
This parameter
indicates
consecutive
the cell.If
this
time interval in
updating
SIB3
Time Interval Updating parameter is set to"1", the
among cells when the state
SIB3 among Cells
actual
of Iu isavailable
changed subchannel
or when the
number
is theisresult
of
DSAR switch
changed.
"AvailSubChanNum
&(111111111111)", it means
Cell Available
the subchannel can be set be
Subchannel Number
This
parameterthis
is used
to
consecutive.If
parameter
Continuous Setting
calculate
thethe
timing
is set to"0",
actual
relationship
between PRACH
available subchannel
number
preambles,
between
the
is the maxminum subchannel
PRACH
preamble and
of "AvailSubChanNum
AICH Transmission
PRACH
message, between
&(101010101010)"
and
Timing
AICH
and PRACH. In
"AvailSubChanNum
addition,
this parameter
is
&(010101010101)"
, it means
used
by the UE toiscalculate
the subchannels
the
effective
sub-channel
nonconsecutive.
Cell
Identity is
valid only inNo.
available
to
ASC.
Cell ID
locates.
common physical channel ID
of AICH. Common physical
AICH Common Physical channel ID is the unique
Channel ID
identifier
allocated
to one the
This parameter
indicates
common
physical
channel
within
a cellwhich
One cell can
of PRACH
contain
several
AICHs.
corresponds to this
AICH.
PRACH Common
Common physical channel ID
Physical Channel ID
is the unique identifier
allocated to one common
physical channel within a cell.
One cell can contain several
This
parameter indicates
PRACH.
AICH STTD Indicator
whether the STTD is
activated for AICH.
This parameter is used in the
procedure of adjusting the
SF512 Number to
number of the HS-PDSCHs
Decrease HS-PDSCH
based on code occupation
Number
ratio to judge whether the
criteria of decreasing the HSPDSCH number is satisfied.
External UTRAN Cell
Dual Cell+MIMO
Support Indicator
HSPA Evolution
External UTRAN
HSPA Evolution
Cell
RNC
Connection
Management
RNC
Connection
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Node B
Management
/Connection
Management
UTRAN Cell
Parameter
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
/Connection
Management
UTRAN Cell
Code Resource
Allocation
SF512 Number to
Increase HS-PDSCH
Number
HS-PDSCH Bit
Rate(kbps)
This parameter is used in the

procedure of adjusting the
number of the HS-PDSCHs
based on code occupation
UTRAN Cell
ratio to reserve a certain
number of codes for the
DPCH.
average data rate of one HS- UTRAN Cell
PDSCH channel.

whether the HS-PDSCH
Co-NodeB HS-PDSCH
code number is shared with
Code Sharing Indicator
other cells of the same
NodeB.
This
parameter indicates the
maximum number of the HSPDSCHs configured in the
Maximum Number of
cell. Minimum Number of HSHS-PDSCH
PDSCH Number of HSPDSCH
Maximum
Number
This
parameter
indicates
the
of
HS-PDSCH.
minimum
number of the HSPDSCHs configured in the
Minimum Number of HScell. Minimum Number of HSPDSCH
PDSCH Number of HSPDSCH Maximum Number
of HS-PDSCH.
Number of E-AGCH
number of the E-AGCHs of
the cell.
Number of E-RGCH/EHICH
Number of HS-PDSCH
Number of HS-SCCH
Switch for DRNC Code

Re-Assignment Radio
Link Release
MBMS S-CCPCH
Reserved Number
(Step: S-CCPCH of
64kbps)

number
of HS-PDSCH
the E-RGCHs/ EWhen the
HICHs
of
the
cell. than the
number is smaller
parameter, the HS-PDSCH
number can be adjusted to
the parameter value directly if
the criteria to increase the
HS-PDSCH number is
satisfied. Minimum Number
of HS-PDSCH Number of
HS-PDSCH Maximum
This
parameter
indicates the
Number
of HS-PDSCH.
number of HS-SCCHs
configured in the cell.
whether to drop the DPCH or
F-DPCH code of the link over
Iur. Release the DPCH or FDPCH code of the link over
Iur when the parameter is set
to
'Off',
otherwise,
do not the
reThis
parameter
indicates
assign
the
code
reserved numbers of
SCCPCH for MBMS with the
step of one S-CCPCH
supporting 64kbps MBMS
service (SF=32).
Code Resource
Allocation
Code Resource
Allocation
/Admission Control
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
/Admission Control
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
Code Resource
Allocation
UTRAN Cell
MBMS
DPCH Code Re-Assign

Support Indicator

whether the function to reassign the downlink DPCH
channelisation code in
HSDPA cell is supported or
not.
period to judge whether to reassign the channelisation
codes of one or several
downlink
DPCH.indicates the
This
parameter
time period to judge whether
the code occupation ratio
satisfies the criteria to adjust
the HS-PDSCH number
based
on code occupation
This
parameter
indicates the
ratio.
unit of time period to judge
whether the code occupation
ratio satisfies the criteria to
adjust the HS-PDSCH
number based on code
occupation ratio.
whether the RNC supports
the 64QAM function or not.
RNC
Code Resource
Allocation
RNC
Code Resource
Allocation
RNC
Code Resource
Allocation
RNC
Code Resource
Allocation
RNC
HSPA Evolution

RNC Enhanced F-DPCH whether the RNC supports
Support Indicator
the Enhanced F-DPCH or
not.
RNC
HSPA Evolution
Enhanced Layer 2
Support Indicator

the Enhanced Layer 2
function or not.
RNC
HSPA Evolution
RNC F-DPCH Support

Indicator

the F-DPCH or not.
RNC
HSPA Evolution

MIMO Support Indicator whether the RNC supports
the MIMO function or not.
RNC
HSPA Evolution
RNC MIMO and

DL64QAM Combined
Capability Support
Indicator

whether RNC supports to
activate downlink 64QAM
and MIMO at the same time
RNC
HSPA Evolution
B Traffic Frequency
Converge Switch

background traffic frequency RNC
converge switch.
DPCH Code Re-Assign

Period(s)
Code Update Period
Code Update Period

Unit
64QAM Support
Indicator
MBMS
S Traffic Frequency
Converge Switch

streaming traffic frequency
converge switch
RNC

cell number of a frequency
RNC
layer in a MBMS service area
code.
cell identity in a MBMS SAC,
Cell Identity of the Cells MAX_NUM_CELL_PER_MB
in the MBMS Service
MSSAC_PER_FREQLEV
RNC
Area
represents the max cell
number within a MBMS SAC,
the default value is 500
DUARFCN of the Cells
downlink UTRA absolute RF
in the MBMS Service
RNC
channel number of the Cells
Area
in the MBMS Service Area.
Cell Number of a
Frequency Layer in a
MBMS SAC
MBMS
MBMS
MBMS
MBMS
Frequency Band
Indicator

frequency band used by the
RNC
cells in the MBMS service
area
MBMS
MBMS Preferred Layer

Indicator for
Frequencies in SAC

whether the MBMS cell is on
RNC
MBMS preferred layer in
SAC
MBMS /Idle Mode

and Common
Channel Behavior
MBMS Service Area

Code

RNC
MBMS service area code.
MBMS
Mobile Country Code

RNC
mobile country code
MBMS

RNC
mobile network code
of MICH. Common physical
MICH Common Physical channel ID is the unique
UTRAN Cell
Channel ID
identifier allocated to one
common physical channel
within a cell One cell contains
only
MICH. indicates the
This one
parameter
number of NI (Notification
Number of NI per Frame
UTRAN Cell
Indicators) that one MICH
radio frame contains.
Mobile Network Code
MBMS
Node B
Management
MBMS /Node B
Management
/Connection
Management
MICH STTD Indicator

whether the STTD is
activated for MICH.

control method to share the
Co-NodeB HS-PDSCH
HS-PDSCH channelisation
Code Sharing Method
codes among the cells of the
same NodeB.
Co-NodeB HS-PDSCH period to update the the HSCode Sharing Update
PDSCH code number to
Period(s)
share for each one of the
cells of the same NodeB.
whether the transmit diversity
PCCPCH STTD
is activated or not for
Indicator
PCCPCH. The transmit
diversity
modesignatures
used by
The effective
PCCPCH
is
STTD.
assigned to each ASC of a
This
indicates
This parameter
parameter
indicates
PRACH
correspond
to twothe
mapping
between
AC
and
P-CPICH Tx Diversity
whether
the
transmit
parameters: Availablediversity
ASC.
AC
is
the
access
level
Indicator
is
activated
or
not
for
signature Begin Index and
stored
in UE
IMSI. ASC
PCPICH.
Available
signature
End is the
RACH
accesssignatures
level of
The
effective
Index.
PRACH
physical
assigned
to
each
ASC
of a
Their relation withchannel.
Available
Mapping
of
Access
Classes
PRACH
correspond
to
two
Signature is: After ordering
AC-to-ASC Mapping
to
Access
Service
Classes
parameters:
Available
the configured Available
will
be used
in initial
signature
Begin
Index
Signature
(whose
bitsetup
isand
1) in
state.
Andsignature
not be
used
in
Available
End
the
ascending
order
(such
connected
Index.
as, 2: 0; 5: state.
1; 12: 2), the
Where
Their
relation
with Available
Available
signature
Begin
Available Signature End Signature
MAX_AC_ASC_MAPPING
is:
After
ordering
Index and the Available
Index
=7.
the
configured
Available
signature
End Index
are the
Signature
(whose
is 1) in
starting index and bit
ending
the
ascending
order (such
index
after ordering.
Range
as,
2:parameter
0; 5: 1;signatures
12:indicates
2), the the
of available
This
Available Signature
Available
signature
(Availablesub-channel
signatureBegin
End
allocated
Begin Index
Index
and
Available
Index-Available
signature
number
forthe
each
ASC of the
signature
End
Index
aresubthe
Begin Index
+ allocated
1)
of different
PRACH.
This
starting
index
and
ending
ASCs
can
overlap
each
channel number can not be
index
after
ordering.
Range
other.
Generally
used directly,
andspeaking,
after
of
signatures
theavailable
higheraccording
level
the ASC
is,
Assigned Subchannel
repeating
to the
(Available
signature
End
the more signatures
it will be
No.
configured
AICH
Index-Available
signature
configured. timing,
transmission
doing
Begin
Index
+
1)
of=8.
different
Where
MAX_ASC
'and'
operation
with
Available
This
parameter
indicates
the
ASCs
can overlap
each
Sub
Channel
Number
then
minimum
effective
spreading
other.
Generally
speaking,
the actual
is
obtained.
PRACH Available
factor
that value
this PRACH
the higher
level
the=8.
ASCcan
is,
Where
MAX_ASC
Subchannel Number
use
(limiting
the
maximum
the more signatures it will be
rate
that the PRACH can
configured.
transmit).
Where MAX_ASC =8.
Cell ID

locates.
UTRAN Cell
MBMS /Node B
Management
/Connection
Management
Node B
Code Resource
Allocation
Node B
Code Resource
Allocation
UTRAN Cell
Node B
Management,
Connection
Management
UTRAN Cell
Node B
Management,
Connection
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Node B
Management / Idle
Mode and Common
Channel Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Parameter
PRACH Common
Physical Channel ID
Initial Dynamic
Persistence Level
Maximum Number of
Preamble Being
Transmitted
Maximum Number of
Preamble Ramping
Cycles
Permitted Maximum
Access Service Class
PRACH Preamble
Scrambling Code
Detected Preamble
Threshold(dB)
PRACH Preamble
Power Ramp Step(dB)
Persistence Scaling
Factor
Persistence Scaling
Factor Number

of PRACH. Common physical
channel ID is the unique
This
parameter
indicates
identifier
allocated
to one the
initial
dynamic
persistence
common
physical
channel
level
byOne
the MAC
layer
withinused
a cell.
cell can
to
calculate
the
transmission
contain several PRACH.
possibility for the ASCi>=1.
Each PRACH is configured
with one value. The dynamic
The
UE
can level
send
access
persistence
of
several
This
parameter
indicates
the
preamble
again
if
not
PRACHs
allocated
maximum times for to
re-UE can
receiving
any together
responses
be broadcast
in from
sending
attempts
on MAC
AICH.
ThisPRACH
parameter
SIB7. The
layer.
physical
indicates
maximum
layer, L1, the
returns
three status
number
that
the
access
to MAC layer when
preamble
sent before
accessingcan
the be
physical
layer
L1
receives
ACK
or
NACK.
according to the actual
cases: ACK (acknowledged),
NOACK (Node B does not
This
parameter
indicates the
response),
and NACK
permitted
number ofWhen
access
(unacknowledged).
the
services
for
the
PRACH.
It or
MAC layer receives NACK
sets
the size
of the
the attempt
following
NO ACK,
adds
This
indicates
three
arrays:
Available
times,parameter
M, by 1.
When
M isthe
preamble
scrambling
code
signature
Begin Index,
over this parameter,
the MAC
index
thatsignature
this
can
Available
layer exits
fromPRACH
the End
access
use.
The
scrambling
code
Index
and
Assigned
Subprocess.
that
can be
Channel
No.used for PRACH
in
each
cell relates
to the the
DL
This
parameter
indicates
primary
scrambling
code
of
preamble judgment threshold
the
cell.
addition,
there are
when
theInNode
B detects
at
most
sixteen
preamble
PRACH preambles. To make
scrambling
codes available.
the access preamble
of the
This parameter
can be used
PPRACH
transmission
be
to
distinguish
theNode
PRACHs.
detected
by the
B, the
This
parameter
proportion
of theindicates
receivedthe
power
ramp
stepinused
preamble
power
the by the
UE
when
it
does
not
receive
preamble cycle and the
any
responses
from
AICH
interference level should be
after
a parameter.
preamble.
largersending
than this
This parameter is used to be
added
to the previous
This parameter
is usedpower,
by
and
then
the
next
preamble
the MAC layer to calculate
is
at this newpossibility
power.
thesent
transmission
for the access service class
whose ASC is not less than
2. Where MAX_ASC_PSF
=6.
number of the ASCs which
are configured persistence
scaling factors.

Broadcast in either SIB5 whether the PRACH
or SIB6
information is broadcast in
SIB5 or SIB6.
UTRAN Cell
Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
UTRAN Cell
Code Resource
Allocation / Idle
Mode and Common
Channel
Behavior /Node B
Management
Idle Mode and
Common Channel
Behavior //Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior(PRACH)/
Power Control
UTRAN Cell
dle Mode and

Common Channel
Behavior, HSPA
Evolution
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Node B
Management / Idle
Mode and Common
Channel
Behavior /Code
allocation
Available Signature
SCH TSTD Indicator
This parameter indicates all

effective signatures when the
PRACH is used. 16 bit
represents 16 signatures; the
bit which equals 1 means the
corresponding signature is
UTRAN Cell
valid. Each signature
corresponds one by one to
the channelization code
number
of PRACH
whose SF
This parameter
indicates
is
16.
whether TSTD is activated or UTRAN Cell
not for SCH.
Node B
Management / Idle
Mode and Common
Channel
Behavior /Code
allocation
Node B
Management
RCP Module Number

RNC
RCP module No..
Code Resource
Allocation
Ending No. of RCP

Scrambling Code

end number of RCP
RCP Module
scrambling code.
Code Resource
Allocation
Starting No. of RCP

Scrambling Code

start number of RCP
RCP Module
scrambling code.
Code Resource
Allocation

AMR_NB 4.75k Use Tag whether AMR 4.75kbps is
used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB

AMR_NB 5.90k Use Tag whether AMR 5. 90kbps is
used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB

used or not.
RNC and PLMN
AMR-NB & AMRWB
AMR Rate Adjustment

Switch for RNC

whether AMR rate
adjustment is supported in
the RNC.
AMR-NB & AMRRNC and PLMN WB/Admission

Control
AMR_WB 6.60k Use

Tag

whether wideband AMR
6.60kbps is used or not.
RNC and PLMN
AMR-NB & AMRWB
AMR_WB 8.85k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 12.65k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 14.25k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 15.85k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 18.25k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 19.85k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 23.05k Use

Tag

RNC and PLMN
AMR-NB & AMRWB
AMR_WB 23.85k Use

Tag


locates.
of SCPICH. Common
physical channel ID is the
S-CPICH Common
unique identifier allocated to
Physical Channel ID
one common physical
channel within a cell. Up to
32 SCPICHs can be
established
in a indicates
cell.
This parameter
S-CPICH Tx Diversity
Indicator
is activated for the SCPICH.
polling period when the
CS/PS domain DSAR
Time Interval of Barred (Domain Specific Access
AC(s)
Restriction) or cell restriction
operate in the method of
"Polling".
The unit
of this
This
parameter
indicates
This
parameter
indicates the
the
parameter
is
"s".
numberofofthe
Barred
AC
switch
Cell Restriction.
Number of Cell Barred (Access
Class) inisone
polling
If this parameter
"Switch
AC
period
when
cell
restriction
Off Cell Restriction by
operates
in the
OMCR", the
cellmethod
switchsofoff
"Polling".
the cell restriction function. If
this parameter is "Switch On
Switch of Cell
Cell Restriction by OMCR",
This
parameter
indicates
Restriction
the cell
switchs on
the cell
whether
Restriction
restrictionCell
function.
If this
operates
method
of
parameterinisthe
"RNC
Controls
"Polling".
If
this
parameter
is
Dynamically Cell Restriction",
set
to
"Polling",
the
cell
Switch of Polling in Cell the cell dynamically opens or
periodically
performs
AC
closes the cell
restriction
Restriction
(Access
Class)
according
to therestriction.
load of If
the
parameter is set to "Not
uplink.
This
parameter
Polling",
the cellindicates
performsthe
AC
number
of according
Barred
ACtointhe
one
restriction
This
parameter
indicates
Number of Barred AC in polling
period
when
CS
AC
barred
the
OMCR.
whether
theinDSAR
(Domain
This
parameter
indicates
the
CS Domain
domain
DSAR
of
each
PLMN
Specific
Access
Restriction)
switch
of
DSAR
(Domain
operates
in theoperates
method of
of
CS domain
in the
Specific
Access
Restriction)
"Polling".
method
of
"Polling".
If
this
in CS domain of each PLMN
parameter
is set
to "Polling",
of
current cell.
If this
Switch of Polling in CS the
cell periodically
performs
parameter
is set to "Switch
Domain DSAR
AC
(Access
Class)
Off CS Domain DSAR by
restriction
in DSAR
CS domain
OMCR", the
is notof
this
PLMN.
If
the
parameter
supported in CS domain of
is
to "Not
theOn
cell
theset
PLMN.
If itPolling",
is "Switch
performs
ACDSAR
restriction
Switch of CS Domain
CS
Domain
by
according
to DSAR
the ACisbarred in
DSAR
OMCR", the
the
OMCR.
supported in CS domain of
the PLMN. If it is "Switch On
and Switch Off CS Domain
DSAR Dynamically by RNC",
the cell dynamically starts or
stops the DSAR in CS
domain of the PLMN
according to CS domain
Load of Iu or accessibility of
Iu
Cell ID
RNC and PLMN
AMR-NB & AMRWB
UTRAN Cell
Parameter
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
connection
management
UTRAN Cell
connection
management
UTRAN Cell
connection
management
UTRAN Cell
connection
management
UTRAN Cell and Connection

PLMN
Management

PLMN
Management

PLMN
Management

Cell Enhanced F-DPCH
whether the cell supports
Support Indicator
Enhanced F-DPCH or not
MIMO Indicator
MIMO Pilot Mode
Cell MIMO Support

Indicator

whether MIMO is used in the
cell.
MIMO pilot mode. "0: PCPICH + P-CPICH" means
two antennas both transmit
P-CPICH. "1: P-CPICH + SCPICH" means two antennas
transmit P-CPICH and SCPICH respectively.
whether the cell supports the
MIMO function or not.
Utran Cell
UTRAN Cell and

HSPA Evolution
PLMN
UTRAN Cell
HSPA Evolution
Utran Cell
HSPA Evolution

Code Node Number with code index of SF =128 for
UTRAN Cell
SF =128 for OCNS
OCNS.(OCNS: Orthogonal
Channel Noise Source).
This
This parameter
parameter indicates
indicates the
whether
Paging
and codes
number of
the SF128
Location/Registration
reserved for OCNS (OCNS:
Restriction
openedNoise
or
Orthogonal isChannel
closed
when
the
DSAR
Source).
(Domain Specific Access
Restriction) of the PLMN is
Switch of Paging and
opened. If the switch is
opened, this cell restricts
Restriction
some UEs from responding
to
paging
message
and the
This
parameter
indicates
initiating
the
number of Barred AC in one
in the
parameter
indicates
Number of Barred AC in This
polling
period when
PS
This
parameter
indicates
the
CS/PS
domain
when
the
whether
the DSAR
(Domain
PS Domain
domain
DSAR
of
each
PLMN
switch
of
DSAR
(Domain
PLMN
has
opened
the
Specific
Restriction)
operatesAccess
in the method
of
Specific
Access
Restriction)
CS/PS
domain
DSAR.
of
PS domain
operates
in the
"Polling".
in
PS domain
of each
method
of "Polling".
If PLMN
this
of
current cell.
If this
parameter
is set
to "Polling",
Switch of Polling in PS parameter is set to "Switch
the cell periodically performs
Domain DSAR
Off
Domain
DSAR
by
AC PS
(Access
Class)
restriction
OMCR",
the DSAR
not If
in PS domain
of thisisPLMN.
supported
in PS
of
the parameter
is domain
set to "Not
the
PLMN.
it isperforms
"Switch On
Polling",
theIfcell
AC
Switch of PS Domain
PS
Domainaccording
DSAR byto the
restriction
DSAR
OMCR",
the
is
AC barred
inDSAR
the OMCR.
supported in PS domain of
the PLMN. If it is "Switch On
and Switch Off PS Domain
This
parameter
indicates
DSAR
Dynamically
by RNC",
S-CPICH Support
whether
the cell supports
the
cell
dynamically
startsSor
Indicator
CPICH
or DSAR
not. in PS
stops the
domain of the PLMN
according to PS domain
Load of Iu or accessibility of
Iu
Number of the Codes
with SF =128 Ordered
for OCNS
HSPA Evolution
UTRAN Cell
Code Resource
Allocation
Code Resource
Allocation

PLMN
Management

PLMN
Management

PLMN
Management

PLMN
Management
UTRAN Cell and

HSPA Evolution
PLMN
T_RLFAILURE(s)
Cell MIMO and

DL64QAM Combined
Capability Support
Indicator
STTD and MIMO
Activation Binding
Indicator
Cell VAM Support

Indicator
Cell Identity
UE Rx-Tx Time
Difference Event Report
Configuration Index for
UTRAN
UE Rx-Tx Time
Difference Event Report
RL Timing Adjustment
UE Transmitted Power
Event Report
Configuration Index 1 for
AMR
Event Report
Handover
UE Rx-Tx Time
Difference Period Report
Location
Event Report
ConfigurationIndex for
PS
the in-sync state, Node B

shall start timer
T_RLFAILURE after
receiving N_OUTSYNC_IND
consecutive out-of-sync
indications. Node B shall stop
and reset timer
T_RLFAILURE upon
receiving successive
N_INSYNC_IND in-sync
indications. If T_RLFAILURE
expires, Node B shall trigger
This
parameter
indicates and
the RL
Failure procedure
whether
the
serving
indicate which radio cell
link set
supports
to activate
is out-of-sync.
Whendownlink
the RL
MIMO
downlink
Failureand
procedure
is 64QAM
at
theparameter
same
triggered,
thetime
state
of the
This
indicates
radio linkSTTD
set change
to the
whether
must be
out-of-sync
state.
activated
when
MIMO is
activated. If the value is set
to 'Bind', MIMO can be not be
activated unless STTD was
activated
whether VAM is supported

locates.
UE Rx-Tx time difference
event report configuration
index for UTRAN, which is
used for indexing the
This
parameter
configuration
of indicates
the set ofthe
UE
Rx-Tx
time
difference
parameters of UE Rx-Tx time
event
report
configuration
difference
event
report for
index
forjudged
RL timing
location
by UTRAN.
adjustment, which is used for
indexing the configuration of
the
of parameters
of UE
Thisset
parameter
indicates
the
Rx-Tx
time
difference
UE transmitted power event
event
report
radio link timing
report for
configuration
index for
adjustment.
AMR
adjustment, which is
configuration
of indicates
the
This parameter
the
parameters
of
UE
transmitted
UE transmitted power
event
power
event report for
AMR.
report configuration
index
for
handover, which is used for
This
parameter
indicates
the
the set
of parameters
of UE
UE
Rx-Tx time
difference
transmitted
power
event
period
report
configuration
report for
handover.
index for location, which is
configuration
of indicates
the set ofthe
This parameter
parameters
of UE
Rx-Tx
time
UE transmitted
power
event
difference
period
report
for
report configuration index for
location.
PS, which is used for
the first set of parameters of
UE transmitted power event
report for packet domain
service.

PLMN
Management
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
Location
UTRAN Cell
Location
UTRAN Cell
AMR & WB-AMR
UTRAN Cell
Handover Control
UTRAN Cell
Location
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Power Control,
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
For event A/B/E/F, this

parameter
is measurement
This parameter
indicates the
time and the
Dedicated Measurement hysteresis
type of dedicated
measurement
time
Type
measurement hysteresis
to be executed
provides
the duration during
by
Node
B
This
indicates
whichparameter
a reporting
criterionhow
filtering
of
the
measurement
has to be fulfilled for the
values
shall beReporting
performed
Measurement Change
Measurement
before
measurement
event
Time /Measurement
procedure to be triggered.
evaluation
and
reporting.
Hysteresis Time
For event C/D, this
The
averaging
shall be
parameter
is change
time.
performed
according
to the
the
and the change time is
following
formula.
Measurement Threshold time the measurement entity
threshold
2 used
for in order
shall rise on
(in ms),
2 of Event E/F for SIR
The
variables
in
the
triggering
event
E,
F formula
for SIR
to trigger a measurement
Error
are
defined
as
follows:
Error
measurement.
report.
Fn is the updated filtered
measurement result
Fn-1 is the old filtered
Measurement Filter
measurement result
Coefficient
Mn is the latest received
measurement result from
physical
layer measurements
This parameter
indicates the
a
=
1/2(k/2)
, where
k is
Function of
function, purpose
etc.
ofthe
the
Measurement
Filter
Configuration
dedicated measurement
Coefficient.
k=1 there's
no
Parameters
parameters Ifindicated
by the
filtering)
configuration index.
In order to initialise the
averaging filter, F0 is set to
This
parameter
indicates the
M1 when
the first
Report Period
frequence
of
measurement
measurement result from the
report
transmitted
by Node B.
physical
layer measurement
is received.
Choice Report
Periodicity Scale
Report Characteristics
Filter Coefficient
RNC
Power Control,
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control
RNC
Power Control
RNC
RNC
RNC
Power Control,
Location
RNC
Power Control,
Location

report period unit applied by
RNC
Node B for measuremnt
result reporting.
report characteristics of
measurement results, which
RNC
can be on demand, periodic
or by triggering all kinds of:
events.
filtering factor that UE
performs the L3 filtering on
UTRAN Cell
the measurement results of
the internal measurement.
Maximum Event Number This parameter indicates the

of UE Internal
maximum event number of
UTRAN Cell
Measurement
UE internal measurement.
UE Internal
Measurement Quantity
Power Control,
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
Power Control,
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location

measurement quantity of the UTRAN Cell
UE internal measurement.
Power Control,
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
Measurement Report
Transfer Mode
Amount of Reporting
Reporting Interval(ms)

RLC mode of the UE internal
measurement report. If the
value is AM RLC, RNC can
request UE for
retransmission after receiving
the error SDU label (not
continuous). If the value is
UM RLC, the retransmission
is not required. Usually,
report the results of the
important measurements in
AM mode and those less
This
parameter
important
in UMindicates
mode (tothe
amount
of reporting
in of
reduce the
traffic volume
periodical
reporting.
the measurement
report and
increase the system
capacity).
reporting interval in periodical
reporting.
UTRAN Cell
AMR & WB-AMR,

Location
UTRAN Cell and AMR & WB-AMR,

Service Related Location
AMR & WB-AMR,
Dynamic Radio
UTRAN Cell and
Bearer Control,
Service Related
Handover Control,
Location
Report Criteria

report criteria for UE internal UTRAN Cell
measurement report.
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
Report Indicator

whether the UE transmitted
power report is requested or
not.
UTRAN Cell
Location
UE Rx-Tx Time
Difference Report
Indicator

whether the UE Rx-Tx time
UTRAN Cell
difference report is requested
or not.
Location
Time to Trigger(ms)

period of time during which
the event condition has to be UTRAN Cell
satisfied before sending a
measurement report.
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
Threshold

UE transmitted power
UTRAN Cell
threshold in event 6a/6b.
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
UE Rx-Tx Time
Difference Threshold
UE Internal
Measurement
Configuration Index
Function of
Configuration
Parameters

This
parameter
indicates the
UE Rx-Tx
time difference
UTRAN Cell
UE
internal
measurement
reporting
threshold
in chips in
configuration
event 6f/6g. index, which is
used to index different
parameter configuration sets
for UE internal measurement,
because there are several
UTRAN Cell
different sets of
measurement values for the
same
set of parameters
This parameter
indicates the
according
specific
function ofto
configuration
measurement
purpose,
parameters corresponding
to UTRAN Cell
measurement
etc.
the UE internalquantity,
measurement
configuration index.
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
MIMO S-CPICH Power
Cell MIMO Precoding

Weight Set Restriction
Support Indicator
Cell Type

SCPICH transmission power
offset for MIMO. This
parameter is the offset
relative
to the PCPICH
This parameter
indicates
power.
whether Precoding Weight
Set Restriction is supported
by the neighbouring cell of
the DRNC. Supporting
Precoding Weight Set
Restriction also indicates
VAM is supported.
cell type.

whether attach and detach
This parameter
indicatesto
procedures
are required
HS-PDSCH Code
This
parameter
indicates the
whether
the
HS-PDSCHs'
be
used
or
not.
NodeB Assignment
CS
domain
DRX
codes
of
a
cell
are
allocated
TRUE: When thecycle
UE
islength
Support Indicator
coefficient.
by
NodeB.
switched off or the SIM card
This
parameter
is used
is unplugged,
send
one for
the
discontinuous
reception
message of IMSI detach to
UE in the side.
idle mode
IMSI Attach and Detach of
the
Whenand
the
Thisnetwork
parameter
indicates
the
Cell_PCH
/
URA_PCH
mode.
Indicator
UE
is
switched
on,
supposing
PS
domain
DRXiscycle
length
This
parameter
used
to
that
the UE is still in the
coefficient.
calculate
thedistrict
paging
registration
where
This
parameter
used
forit is
occasion,
that
is,isashall
constant
deactivated,
UEs
apply
the discontinuous
reception
required
in monitoring
the
IMSI
attach
and
detach
This
parameter
indicates
the
of
UE
in
the
idle
mode
and
PICH
cycle.
The
CN Domain Supported procedure. Otherwise, UEs
supported
CN
domain
Cell_PCH
/ URA_PCH mode.
discontinuous
cycle
shall
not applyreception
IMSI
attach
This
parameter
is used
to
is
2^k
frames.
and
detach procedure.
calculate
paging
In the idlethe
mode,
if UE has
occasion,
that
a constant
attached in CSis,
domain
and
in monitoring
the
CS Domain DRX Cycle required
PS domain,
then k is the
PICH
cycle.
Thein CS domain
Length Coefficient
minimum
value
discontinuous
reception
cycle
DRXnetwork
cycle length
coefficient,
The
operation
mode
is
frames.
PS2^k
domain
DRX cycle
length
is
used
to indicate
whether
In
the
mode,
if installed
UE has
coefficient.
If UE is
has
the
Gsidle
interface
attached
in
CS
domain
attached
only in Mode
one ofand
not. Network
PS Domain DRX Cycle or
PS
domain,
then
k isorthat
the
domain(CS
domain
PS Gs
Operation I indicates
Length Coefficient
minimum
value
in
CS
domain
domain),
then
k
is
attached
interface occurs.
DRX
cycle
length
domain
DRX
cycle
length
Network
Mode
of coefficient,
Operation
PS
domain
DRX
cycle
length
coefficient.
II
indicates
that
Gs
interface
The
T3212 Ifis UE
the has
timeout
coefficient.
In
thenot
connection
mode, k is
does
occur. location
value
for
periodic
Network Mode of
attached
only value
in one
the
minimum
in CSthat
The
Gs
interface
means
area
updating
in decihours.
Operation
domain(CS
domain
or PS
domain
DRX
cycle
length
there
is
a
LA/RA
combined
The
location
update
occurs in
domain),
then
kdomain
is attached
coefficient,
PS
DRX
update.
LA/RA
combined
the
system
due
to two
domain
DRX
cycle
length
cycle
length
coefficient,
update:
when
the
UE
with
a
reasons:
UE finds the and
coefficient.
UTRAN
DRX
cycle
length
CS
connection
trigger
Timer for Periodic
location
area has changed
In
the connection
mode,the
k is
coefficient.
to theand
SGSN,
Location Update(T3212) attaching
(different
LAC)
theCS
the
minimum
value
in
SGSN
(hour)
network
prescribes
that the
domain
DRX
cycle
length
will trigger
the
ROUTE
This
parameter
defines
the
MS
should
update
the
coefficient,
PS
DRX
UPDATE
procedure.
Wait Time for RADIO
time
period
the domain
RNC The
has
to
location
periodically.
cycle
lengthreceiving
coefficient,
BEARER
wait
before
theand
T3212
is
representation
of
UTRAN
DRX cycle length
RECONFIGURATION
RADIO
BEARER
the
timeout
value for periodic
coefficient.
COMPLETE when
RECONFIGURATION
location area updating.
CELL_DCH to
COMPLETE when the RNC
CELL_FACH(s)
orders the UE Leaving
CELL_DCH to CELL_FACH.
UTRAN Cell
Power Control
/MIMO
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
Handover Control,
UTRAN Cell and Idle Mode and
PLMN
Common Channel
Behavior
UTRAN Cell
Code Resource
Allocation
Connection
Management / Idle
RNC and PLMN
Mode and Common
Channel Behavior
RNC and PLMN
Connection
Management
RNC and PLMN
Connection
Management
RNC and PLMN
Connection
Management
RNC and PLMN
Connection
Management
RNC and PLMN
Connection
Management
RNC
connection
management
Encryption Algorithm

Connection
encryption algorithm that the RNC and PLMN
Management
RNC supports.
Wait Time for RRC

Connection
Reestablishment(s)

time period the UE has to
wait before repeating the
RNC
accessing request procedure
after UE receives RRC
CONNECTION REJECT.
Connection
Management
Cell Identity

locates.
Parameter
UTRAN Cell
Reserved Parameter 1 Reserved Parameter 1 for

for External UTRAN Cell External UTRAN Cell

Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use


Cell
future use
Fast Reconfiguraton
Support Indication

RNC supports fast
reconfiguration function.
RNC and PLMN
Node B
Management
Golbal Reserved
Parameter 1
Golbal Reserved Parameter

1
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 10

10
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 11

11
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 12

12
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 13

13
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 14

14
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 15

15
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 16

16
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 17

17
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 18

18
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 19

19
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 2

2
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 20

20
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 3

3
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 4

4
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 5

5
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 6

6
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 7

7
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 8

8
RNC and PLMN
parameter for
future use
Golbal Reserved
Parameter 9

9
RNC and PLMN
parameter for
future use
Cell ID

locates.
UTRAN Cell
Parameter
Cell Identity

locates.
UTRAN Cell
Parameter
Cell Identity

locates.
UTRAN Cell
Parameter
Cell CPC Support

Indicator

whether the cell supports the Utran Cell
CPC function or not.
HSPA Evolution
Cell Reserved
Parameter 1
Cell Reserved Parameter 1
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 10
Cell Reserved Parameter 10 UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 11
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 12
parameter for
future use
Cell Reserved
Parameter 13
parameter for
future use
Cell Reserved
Parameter 14
parameter for
future use
Cell Reserved
Parameter 15
parameter for
future use
Cell Reserved
Parameter 16
parameter for
future use
Cell Reserved
Parameter 17
parameter for
future use
Cell Reserved
Parameter 18
parameter for
future use
Cell Reserved
Parameter 19
parameter for
future use
Cell Reserved
Parameter 2
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 20
parameter for
future use
Cell Reserved
Parameter 3
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 4
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 5
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 6
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 7
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 8
UTRAN Cell
parameter for
future use
Cell Reserved
Parameter 9
UTRAN Cell
parameter for
future use
URA Identity

RNC
UTRAN register area.

Does the Cell Belong to whether the physical cell
Self Physical RNC
belongs to the Self physical
RNC.
Parameter
RNC
Parameter
Physical Cell Identity

physical cell identity., it
identifies a cell uniquely. One RNC
physical cell corresponds to
four logic cell at most.
Parameter
NodeB No.

Node B number, which is
Node B
valid in RNC.
Parameter

The
parameter
indicates of
interval
of retransmission
Maximum Number of
maximum
number
of SETUP
CONNECTION
Retransmissions of the RRC
Specifies
the time
delay
of IU
retransmissions
of
the RRC
message.
RRC CONNECTION
Release
Resource.
CONNECTION
SEUTPRRC
Start: Transmission
SEUTP
Start:
RNC receivesof
a
message
CONNECTION
SETUP.
DOWNLINK DIRECT
Stop:
Reception
of RRC
TRANSFER
message
from
Interval of
CONNECTION
SETUP
Retransmission of RRC CN at Time1, or
COMPLETE.
RNC receives a UPLINK
CONNECTION
At
expiry:TRANSFER
Retransmit RRC
DIRECT
SETUP(100ms)
CONNECTION
REQUEST
message from UE
at Time1if
the
times
of
transmit
Then RNC receivesRRC
a IU
CONNECTION
REQUEST
RELEASE COMMAND
from
Timer for IU Release
=<
else
the RrcSetupRetraNum,
CN at Time2.
Resource(100ms)
release
the
RRC
connection
If Time2 minus Time1 is
of UEthen Tiureldelay, RNC
less
start
which
length is
MCCtimer
uniquely
identifiesthe
equal
to
Tiureldelay
-(Time2country that the UE users
(or
Time1),
else
RNC
release
Mobile Country Code
the
Iu resource
immediately.
allocated
uniformly
and
Stop: If Timer is started, it
internationally.
needn't stop until it expired.
MCC
uniquely
identifiesthe
At expiry:
Rnc will
release the
country
that
the
UE users (or
Iu resource.
Mobile Country Code
internationally.
RNC
Connection
Management
RNC
Connection
Management
RNC
IU RESOURCE
RELEASE
RNC and PLMN
Parameter
RNC and PLMN
Parameter
Mobile Country Code
Mobile Country Code
Mobile Country Code
Mobile Country Code
Mobile Country Code
Mobile Country Code
Mobile Country Code

internationally.
internationally.
internationally.
internationally.
internationally.
internationally.
internationally.
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
Mobile Network Code

(decided by MCC).
RNC and PLMN
Parameter
RNC Identity

RNC ID. RNC ID is
distributed uniformly in
PLMN.
RNC
Parameter
Mobile Country Code

country that the UE users (or Neighboring
Eutran Cell and
PLMN
internationally.
Parameter
Mobile Network Code

(decided by MCC).
Parameter
Neighboring
Eutran Cell and
PLMN

code length of the MNC BCD EUtran
MNC BCD Code Length
of the neighboring EUtran
Neighboring Cell Parameter
cell.
ENodeB Type
The parameter is the

Adjacent EUTRAN
eNodeB type that EUtran cell EUtran
cell Basic
belongs to. It can be Macro Neighboring Cell
Parameter
eNodeB or Home eNodeB.
ENodeB ID

eNodeB identity that EUtran
cell belongs to.
Adjacent EUTRAN
EUtran
cell Basic
Neighboring Cell
Parameter
Tracking Area Code

Adjacent EUTRAN
EUtran
TAC of the neighboring
cell Basic
Neighboring Cell
EUtran cell.
Parameter
Cell Identity

locates.
Eutran Cell
Relation
Parameter
ENodeB ID

eNodeB identity that EUtran
cell belongs to.
UTRAN Cell
Parameter
Neighboring EUTRAN
Cell Identity

EUTRAN cell identity. It
identifies a neighboring
EUTRAN cell uniquely.
Eutran Cell
Relation
Parameter

Does Neighbouring Cell
whether the neighboring
Gsm Cell
Belong to Self Physical
GSM cell belongs to the Self Relation
RNC
physical RNC.
EUTRAN Cell Identity
Physical EUTRAN Cell

Identity
Cell ID

EUTRAN cell identity. It
identifies
a neighboring
The parameter
is used to
EUTRAN
cell uniquely.
identify a Eutran
physical
cell. There are 504 unique
physical-layer cell identities.
The physical-layer cell
identities are grouped into
168 unique physical-layer
cell-identity groups, each
group containing three
Cell
Identity
is valid only in
unique
identities.
locates.
Parameter
External
EUTRAN Cell
Parameter
External
EUTRAN Cell
Parameter
UTRAN Cell
Parameter
Radio Capacity of Cell
Radio Capacity of Cell
UTRAN Cell
Parameter
Routing Area Colour

Code
Routing Area Colour Code
External GSM
Cell
Adjacent Gsm cell

Basic Parameter
PLMN Number of
Sharing the Network
Element

PLMN number of Sharing the NE Office
Network element.
Parameter
Mobile Country Code
Mobile Network Code
Time of Waiting for

RADIO LINK RESTORE
INDICATION(100ms)
Time of Waiting for
CELL UPDATE After
RNC Sending Radio
Link Deactivation
Command for RB
Setup/Reconfiguration/R
elease Response Timer
Expiration(100ms)
Waiting time length for
ACTIVE SET UPDATE
COMPLETE(100ms)
Time of Waiting for RB
Setup/Reconfiguration/R
elease Response over
Uu Interface(s)
Time of Waiting for RRC
CONNECTION
COMPLETE
Switch of Fast
Reconfiguration
Function When the HS
Service Cell was
Changed
Waiting Timer for SRNS
Context Request
Waiting Timer for SRNS

DATA FORWARD
COMMAND
Waiting Timer for IU

RELEASE COMMAND

Specifies
time ofto.
Waiting
system) belong
MCC isfor
RADIO
LINK
RESTORE
INDICATION.
internationally.
If the RNC receives a RADIO
LINK SETUP RESPONSE
MNC
identifies
a specific
message
from the
PLMN
inside
one
country
NodeB/DRNC, If the
RNC
(decided
by
MCC).
The
parameter
indicates
receives a RADIO LINK ADD
wating
time length
for CELL
RESPONSE
message
from
UPDATE
after RNCand
sending
the NodeB/DRNC,
the
Radio
Link Deactivation
The
parameter
RL belongs
to aindicates
new RlSet, If
command
after RB
Time
of Waiting
foraRB
the RNC
receives
RADIO
Setup/Reconfiguration/Relea
Setup/Reconfiguration(not
for
LINK FAILURE INDICATION
se
Response
Timer
hard-handover)/Release
message from the
The
parameter
indicates
time
Expiration..
Response
over and
Uu Interface
NodeB/DRNC,
the cause
of
Waiting
for
CELL
UPDATE
Transmission
of send
Radio
Start:
When the RNC
is synchronisation_failure
or
After
RB BEARER
Link
Deactivation
in case
of
the
RADIO
SETUP
not_enough_user_plane_pro
Setup/Reconfiguration(not
for
RNC
foundBEARER
rl failure the
or rlc
or
RADIO
cessing_resources,
RNC
hard-handover)/Release
unrecoverable
error
or
RELEASE
or
RADIO
shall wait the
LINK
Response
Timer
Expiration
doesn't
receive
response
BEARER
RESTORE
INDICATION
Start:
When
theUE.
RNC send
message
from
RECONFIGURATION
or
message
from
the
RL
RADIO
LINK
Stop:
Reception
of CELL
TRANSPORT
CHANNEL
NodeB/DRNC
ACTIVATION
COMMAND
UPDATE
RECONFIGURATION
or to
NODEB
or
DRNC.
At
expiry:
Release
RRC
PHYSICAL CHANNEL
Stop:
Whenofthe
RNC
connection
UE.
RECONFIGURATION
receives
CELL UDPATE
messagethe
to UE.
from
Stop:UE.
When the RNC
At
expiry:the
TheRADIO
RNC releases
receives
all
RRC
connection
of UE.
The
parameter
indicate
timer
BEARER SETUP
length
of
waiting
for
RRC
COMPLETE or RADIO
CONNECTION
COMPLETE
BEARER RELEASE
Start:
Send RRC
COMPLETE
or RADIO
CONNECTION
SETUP
BEARER
Stop:
Receive
RRC
RECONFIGURATION
CONNECTION
SETUP
COMPLETE or TRANSPORT
COMPLETE
CHANNEL
Expiration:
Release
RL
RECONFIGURATION
Theparameter
parameter
indicates
his
indicates
timer
COMPLETE
or
PHYSICAL
whether
apply
fast
length waiting for SRNS
CHANNEL
reconfiguration
function when
CONTEXT REQUEST
RECONFIGURATION
HS
service
cell
was
changed.
Start: When cell relocate
to
COMPLETE
from
UE.
another
RAT,
the
timer
is
This
parameter
indicates
At
expiry:
The RNC
send
started.
timer
length
waiting for SRNS
Radio
Link
Deactivation
Expiration:
Start another
DATA
FORWARD
Command
to all RLS.
timer
for
waiting
DATA
COMMAND.
FORWARD
COMMAND
Start: After SRNS send from
CN.
CONTEXT RESPONSE to
Stop:
When
SRNS
CN, the
timerreceive
is started.
CONTEXT
REQUEST,
This
parameter
indicates
Expiration:
Start
anotherstop
the
timer.
timer
length
that IU
waiting for
timer
for waiting
IU
RELEASE
COMMAND
RELEASE
COMMAND
from
Start:
CN. After SRNS receive
DATA
FORWARD
Stop: When
SRNS receives
COMMAND
timer waiting
SRNS DATAor
FORWARD
for
the message
COMMAND,
the has
timerexpired.
is
Expiration:
stopped. Release Iu
resource.
Stop: When SRNS receives
IU RELEASE COMMAND,
the timer is stopped.
RNC and PLMN
Parameter
RNC and PLMN
Parameter
RNC
Radio Link Restore
RNC
RB Reestablishment
RNC
Connection
Management
RNC
RB Reestablishment
RNC
Connection
Management
RNC
Node B
Management
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
may resend the

MEASUREMENT CONTROL
RELEASE.
When RNC send
MEASUREMENT CONGROL
RELEASE message for a
measurement ID, the time
stamp will be recorded. If
The Time Threshold that
RNC receive the
the RNC May Resend
measurement report for the RNC
the MEASUREMENT
ID, it will be compared
CONTROL RELEASE
between current time and
recored time. If difference
This
parameter
between
currentindicates
time andthe
Plmn Select Method for mothod
PLMN
selection
recordedoftime
exceed
the , RNC
MOCN Network Sharing when
MOCN
is
used
for
threshold configured, the
network
sharing CONTROL
MEASUREMENT
RELEASE will be resended,
otherwise ignore this
The
parameterreport.
indicates
measurement
Signalling Service Type signal service type that need RNC
config CFN offset value.
Handover Control
Feature Description
RAN Sharing
Connection
Management
Feature Description
Fast ReConfiguration
Sence Indicator
The Parameter indicates

whether the CFN offset value
RNC
is applied to fast
reconfiguration scene.
Connection
Management
Feature Description
Data Retransmission
Rate Factor over Uu
Interface
The parameter indicates that

data retransmission rate
RNC
factor corresponding CFN
offset value over Uu
interface.
Connection
Management
Feature Description
Packet Length Type

Indicator over Uu
Interface
The parameter indicates that

packet length region
RNC
corresponding CFN offset
value over Uu interface.
Connection
Management
Feature Description
CFN Offset Value
Network Resource
Identifier Bit Num in CS
Domain
Network Resource
Identifier Bit Num in PS
Domain
Special Network
Resource Identifier in
CS Domain
Special Network
Resource Identifier in
PS Domain
Network resource identifier

(NRI)
is unique indicates
to identifyCFN
the
The parameter
CN
node
in a pool area of
offset
value.
CS/PS domain, it is allocated
by CN node and included in
TMSI/P-TMSI
to inform
UE.
Network resource
identifier
According
to
protocol,
the
(NRI) is unique to identify the
length
of NRI
is variable(0-10
CN node
in a pool
area of
bit,
the
highest
is allocated
the 23CS/PS domain,bit
it is
bit
of TMSI/P-TMSI).The
by CN
node and included in
number
of NRItobitinform
is
TMSI/P-TMSI
UE.
configured
according
the
According to protocol,tothe
pool
area
network
and
the
length of NRI is variable(0-10
NRI
allocation
CN
bit, the
higheststrategy
bit is thein23node.
bit
of
TMSI/P-TMSI).The
number
of NRI bit
is
value 'null-NRI'
of CS
configured
according
to the
Domain, when RNC receive
pool
area
network
and
thethe
a message with null-NRI,
NRI
allocation
strategy
NAS Node Selection in CN
node.
Function
shall be
used forthe
This parameter
indicates
selecting
a
CN
node.
value 'null-NRI' of PS
Domain, when RNC receive
a message with null-NRI, the
NAS Node Selection
Function shall be used for
selecting a CN node.
RNC
Connection
Management
Feature Description
RNC
Iu Flex
RNC
Iu Flex
RNC and PLMN Iu Flex
RNC and PLMN Iu Flex

detected set measurement
configuration index for
Detected Set
CPICH Ec/No, used for
Measurement
Configuration Index for the
of intra-frequency
Thisset
parameter
indicates the
CPICH Ec/No
measurement
parameters for
detected set measurement
detected
set when
configuration
index for
measurement
Detected Set
CPICH RSCP, quantity
used foris
CPICH Ec/No.
Measurement
indexing
the configuration of
Configuration Index for the set of intra-frequency
This
parameterparameters
indicates the
CPICH RSCP
measurement
for
UE
eventset
report
configuration
detected
when
index
for CPICH
Ec/No,isused
measurement
quantity
UE Event Report
for
indexing
the
configuration
CPICH RSCP.
Configuration Index for of the set of intra-frequency
CPICH Ec/No
measurement
for
This parameterparameters
indicates the
event
reporting
by
UE
event
reportdecided
configuration
UE
when
measurement
index
for CPICH
RSCP, used
quantity
is
Ec/No.
UE Event Report
for indexingCPICH
the configuration
CPICH RSCP
measurement
for
indicates the
event reporting
decided by
period
UE
when
measurement
index
for CPICH
Ec/No, used
quantity
is
RSCP.
Period Report
for indexingCPICH
the configuration
CPICH Ec/No
measurement
for
indicates the
periodical
reporting
when
period
report
configuration
measurement
quantity
This
indicates
the
indexparameter
for CPICH
RSCP,isused
CPICH
Ec/No.
HSDPA
associate
Period Report
for indexing the configuration
mode method.
Configuration Index for compressed
of the set of intra-frequency
The
value
of
' means
CPICH RSCP
measurement'Serial
parameters
for
that
compressed
mode
and
periodical reporting when
HSDPA
can notquantity
be used
measurement
is
This
parameter
indicates
the
together,
if HSDPA
is used,
CPICH
RSCP
HSUPA
associate
HSDPA Associate CM
only when
HS-DSCH->DCH
Compressed
Modeismethod.
Method
channel transition
The
value of
'Serial
completed
can
the ' means
that
compressed
mode
compressed
mode
be and
For
HSPA,
this
parameter
HSUPA
can
not
be
used the
This
parameter
indicates
activated.
indicates
the
minimum
together,
if
HSUPA
is
maximum
times
to
report
the
The value of 'Parallel'used,
means
HSUPA Associate CM
interval
between
two
HSPA
only
when
HS-DSCH->DCH
measurement
report
after
that
compressed
mode
and
Method
serving
changes
channel
transition
is or
triggering
event
1a/1b/1c/1j
HSDPA cell
can
be used
channel
,
which
helps
to
completed
can
the
(because
together. they are reported
avoid
too
frequent
HSPA
compressed
mode
be
periodically). After event
serving
cell is
changes
andthe
activated.
1a/1b/1c/1j
triggered,
Timer for Event 1D in
channel
transition.
Thereports
value
ofthe
'Parallel'
means
UE
measurement
HSPA or MBMS(s)
For
this parameter
that MBMS,
compressed
mode
results
according
to the and
indicates
thebe
minimum
HSUPA
can
used
report
intervals.
If thetogether
times
interval
between
two bestthe
cell
of event reports exceeds
changes
due
to
event
1d
This
parameter
indicates
the
value indicated by this
whichinterval
helpsUE
to
to avoid
reporttoo
the
Amount of Reporting for time
parameter,
stops
frequent
between
measurement
results
after
Event 1A/1B/1C/1J
reportingchange
the measurement
PTP
andIf PTM
bearer
triggering
event
1a/1b/1c/1j
results.
the
result
of types.
(because
they
are
reported
judgment indicates that event
periodically).
After event
1a/1b/1c/1j finishes,
stop
1a/1b/1c/1j
is
triggered, the
reporting the measurement
Reporting Interval for
UE reports the measurement
Event 1A/1B/1C/1J(ms) results even the times of
results
according
to the
the value
report do
not reach
report
intervals.
indicated
by this parameter.
MAX_INTRA_MEAS_EVENT
indicates
indicates the
the maximum
maximum
number
of
number of intra-frequency
intra-frequency
measurement
measurement event,
event, which
which is
is
7.
7.
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
RNC
Handover Control
RNC
Handover Control
RNC
Handover Control
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UE freely). Then L1 reports

This
to L3parameter
at intervalsindicates
and L3 the
hysteresis
used when judging
filters the latest
whether
to trigger
the and
event.
measurement
results
the
This
parameter
makes
it
measurement results saved
different
between
the status
previously.
The filtering
shall
to
an event
and the
betrigger
performed
according
to
status
to leave
the event, so
the following
formula
as
to avoidinthe
trigger
described
3GPP
TSstatus
change
due
to
very
small
Filter Coefficient
25.331: "RRC Protocol
change.
Specification": Fn=(1-a)*FnThe
larger
value is,. the
1+a*Mn
, athe
= 1/2^(k/2)
larger
theupdated
difference
between
Fn is the
filtered
the
status
to trigger
the event
measurement
result
This
parameter
indicates
the
and
the
status
to leave
the
Fn-1
is
the
previous
filtered
configuration
index
of
the
Hysteresis(dB)
event
will be. result
measurement
intra-frequency
measurement
This
parameter
is related
Mn is the latest
received
parameters,
which
is usedtoto
the
measurement
quantity
measurement
result
index different parameter
and
the eventsets
type.forthe
a
= 1/2^(k/2),
where
value
configuration
intraIntra-frequency
Different
are
of k is theevents
Filter
Coefficient.
frequency
measurement.
Measurement
configured
separately
andwill
NOTE:are
if kseveral
is
set todifferent
0 that
There
Configuration Index
can
be
configured
with
mean
no
layer 3indicates
filtering.
sets
of
measurement
values
This
parameter
the
different
hysteresis
This
formula
indicates
that
for
the
same
set
of
function
of
different
intra
the
smallerconfiguration
the
value oftothe
parameters
according
frequency
indicates
the
maximum
Function of
filtering
factor
is,
larger
specificIt measurement
index.
is used
tothe
explain
number
of
intra-frequency
Configuration
effect
the
current
purpose,
measurement
the
purpose
and
functions
ofis
This
parameter
indicates
the
measurement
which
Parameters
measurement
result
have
quantity
and
soevent,
on. will
the
set
of
intra-frequency
event
triggered by result
the
7
on
theID
measurement
measurement
configuration
intra-frequency
reported
to RNC (periodical
parameters.
This
parameter indicates
measurement.
report) or the judgment
number
of events required to
Intra-frequency Event
(event report).
be
configured
for the set of
Identity
indicates
the maximum
the
intra-frequency
number
of intra-frequency
measurement
measurement parameters
event, whichfor
is
a
certain
purpose.
The
7.
number of the events is
Event Number of Intrarelated to the purpose of the
frequency Measurement
measurement and the
judgment method of the soft
handover.
The measurement
This parameter
indicates the
parameter
of the
soft of the
measurement
quantity
handover
is
related
to thethe
This
parameter
indicates
Measurement Quantity intra-frequency measurement
number
of
the
events
the
maximum
times
to
report
the
that UE performs and in
it is
soft
handover
algorithm.
measurement
results
in
related to actual scenario.
periodical reporting.UE uses
this paramter to judge
Amount of Reporting in whether
it needsindicates
to reportthe
This parameter
This
parameter
indicates
theIf
Period Report Criteria
more
measurement
minimum number of results.
the cell
report
rules
the times
of of
event
reports
that
can
exist
inthe
theintraDCH
frequency
measurement.
exceeds
value
indicated
active
setthe
when
triggering
This parameter
indicates
the
When
the
value
is
'Periodical
by
this
parameter,
UE
stops
event
1c
or
in
the
E-DCH
reporting interval for periodic
Reporting Interval in
Reporting
Criteria',
sets
reporting
the
measurement
active
setmode.
when
triggering
reporting
UEtwo
reports
Period Report
of
the
measurement
results.
event
1j. When UEresults
detects
the measurement
Criteria(ms)
parameters
that
one cell
satisfies
according
toare
therequired
reportthe to
be
configured.
One
set of the
trigger
threshold
of event
intervals.
periodical
parameters
are
1c/1j, it first
checks whether
Replacement Activation configured
the numbertoofUE
theand
cellsthe
in the
set
of event
parameters
Threshold for Event 1C other
current
active
set is
smaller
are
to SRNC by
for
and 1J
thanconfigured
the value indicated
event
judgment.IfWhen
this parameter.
so, event
receiving
the
periodical
1c/1j is not
triggered.
If the
measurement
from
value is 0, the reports
parameter
is
UE,
SRNC judges which
invalid.
Report Criteria
event
is triggered according
to
the
event
indicates
thecriteria
maximum
parameters,
and then
decides
whether
to perform
measurement
event,
which is
the
7 software handover
according to the triggered
event. When the value is
Event Reporting Criteria, only
one set of the measurement
parameters is required to be
configured to UE. SRNC
decides whether to perform
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related

maximum number of the cells
that can exist in active set.
When the UE detects that
one cell in the monitoring set
satisfies the threshold of
event 1a, it first judges
whether the number of the
cells in the current active set
Reporting Deactivation
is not bigger than the value
Threshold for Event 1A This parameter controls the
indicated
this parameter.
triggering by
of event
1a/1b. 1a If
so,easier
eventbut
1a1b
is triggered.
If
is
is harder to
not,
event
1athis
is not
triggered.
trigger
when
value
Reporting Range
increases;
and vice
verse.the
This
parameter
indicates
indicates
the maximum
Constant for Event
time
difference
between
number
ofthe
intra-frequency
1A/1B(dB)
indicates
maximum
having
detected
the eventthe
This
parameter
indicates
measurement
which is
number ofthreshold
intra-frequency
generation
andevent,
reporting
absolute
value the
7.
measurement
event,
event.
Only
when
the which
event is
used for
event
1e/1f.
7.
generation
is
detected
and
Threshold of the Quality MAX_INTRA_MEAS_EVENT
still
meets
all
requirements
of
of the Used Frequency indicates the maximum
event
triggering
after
Time
to
for Event 1E/1F
trigger,
the event
can which
be
measurement
event,
is
triggered
and reported. The
7.
larger the value is, the stricter
This
parameter
for
the judgment
is is
forused
the event
Time To Trigger(ms)
quality
judgmentThe
of event 1a
to be triggered.
and
1b, which
indicates
parameter
should
be setthe
weight
of the
bestactual
cell in the
according
to the
quality
judgment
and
is
requirements. Sometimes,
if
related
to
the
measurement
it is set too large, the quality
Weight for Event 1A/1B quantity
and decrease.
the event type.
of calls may
indicates
indicates the
the maximum
maximum
number
number of
of intra-frequency
intra-frequency
measurement
which
is
measurement
event,
which
is
Cell
Identity
is event,
valid
and
This
parameter
is used
in the
7.
7.
Cell Identity
unique
only
in
the
RNC
following scenario: For multiwhere
the cellPS
locates.
RAB service,
service is
released and only R99 CS
service remains, if the cell is
Service of CS Handover R5+R6+R99 or R5+R99 and
for CS+PS in Multionly HS PS is preferred
Carrier Scenario
traffic, UE will be balanced to
a cell with shared coverage
relation, R99 service
available
andisnot
only
HSinthe
PS
This
parameter
indicates
Cell Identity
valid
only
preferred
when
the
configuration
index
of
the
Cell Identity
parameter
is "On".
intra-frequency
locates. valuemeasurement
parameters, which is used to
configuration sets for intraIntra-frequency
frequency measurement.
Measurement
There
arethe
several
different
Specifies
maximum
Configuration Index
sets of measurement
values
number
of RESET
for
the
same
set
of
RESOURCE
re-transmit.
parameters
according
to
If
the RNC
a RESET
typical
loadsends
balance
specific measurement
RESOURCE
to the
scenarios.
Formessage
each scenario,
Load Balance Scene
purpose,
measurement
CN
and receives
noload
RESET
the corresponding
quantity
so on. can be
RESOURCE
balance and
parameters
ACKNOWLEDGE
message
set as different values.
within a period of time then it
Maximum Number of
shall repeat the entire Reset
Resource procedure. The
RESOURCE RESET
sending of the RESET
Message
RESOURCE message shall
be repeated a maximum of
"n" times where n is an
operator matter. After the n-th
unsuccessful repetition the
procedure shall be stopped
and the maintenance system
be informed.
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell
Parameter
UTRAN Cell
Load Balance
/Handover Control
UTRAN Cell
Parameter
Idle Mode and

UTRAN Cell and
Common Channel
Service Related
Behavior
UTRAN Cell
Load Balance
RNC
IU RESOURCE
RESET
Maximum Number of
RESET Message
Timer for State

Query(100ms)
Possible Secondary
Serving Cell ID
Specifies the maximum

number of RESET retransmit.
If the RNC sends a RESET
message to the CN and
receives no RESET
ACKNOWLEDGE message
within a period Trafc then it
shall repeat the entire Reset
procedure. The sending of
the
RESET
Specifies
themessage
timer forshall
Statebe
repeated a maximum of "n"
Query.
times
is an operator
Whenwhere
in FAILn status,
the CN
matter.
After
the
n-th check
Monitor Module should
unsuccessful
repetition
the
the signaling point
and user
procedure
shall
be
stopped
service status periodically
and
the maintenance
according
to the timersystem
be
informed.
Tcnquery.
Possible Secondary Serving
Cell ID for the neighbor cell
over Iur.
RNC
IU RESET
RNC
IU RESOURCE
RESET
External UTRAN
HSPA Evolution
Cell
Dual-Cell HS-DSCH
Support Indication
This parameter indicate

whether Dual-Cell HS-DSCH External UTRAN
HSPA Evolution
is supported for the neighbor Cell
cell over Iur.
MCC for RAN

Sharing(MCC)
MCC for RAN Sharing
Node B
RAN Sharing
/Admission Control
Minimal percent of CE
can be used by the
PLMN
Minimal percent of CE can

be used by the PLMN for
RAN Sharing while carrier
sharing, which can not be
occupied by other
operator(PLMN)
Node B
RAN Sharing
/Admission Control
MNC for RAN

Sharing(MNC)
MNC for RAN Sharing
Node B
RAN Sharing
/Admission Control
Number of PLMN for

RAN Sharing
Number of PLMN for RAN

Node B
Sharing while carrier sharing
RAN Sharing
/Admission Control
Mobile Country Code

RNC and PLMN
Parameter
internationally.
Mobile Network Code

(decided by MCC).
ARP Segment

segment of
RNC and PLMN QoS Guarantee
Allocation/Retention Priority
(ARP).
RNC and PLMN
Parameter
Basic Priority
Traffic Class
Support Type of
Downlink RLC Flexible
PDU Size Format
Downlink NonConversational Service
Maximum MAC-d PDU
Size Extended
Mobile Country Code

Basic Priority (BP) which is a
kind of service priority
mapping from RAB
QoS Guarantee
RNC and PLMN
parameters such as ARP,
/overbooking on iux
traffic class and THP. It is
used in other RRM priority
mapping.
traffic class

support type of RLC felxible
PDU size format for signaling
and service.
Non-Conversational service
maximum size in octets of
the MAC level PDU when an
extended MAC level PDU
size is required.
internationally.

This
parameter
indicates the
(decided
by MCC).
Application Priority (AP)
which
is mappedindicates
from Basic
This parameter
the
Priority, bearer
type and rate
Application
Priority
segment.
It is index.
used in
load
configuration
There
Application Priority
control.
It
makes
possible
are several different sets ofto
provide
higherofrate
configuration
the to users
with
higher
priority
Application Priority while
lower
rate to
with lower
configured
in users
RNC level
and
priority. cells can use this
different
Application Priority Index
parameter to index the
different sets of the
configuration seperately. The
configuration parameters
indicated
by thisindicates
index is the
This
parameter
Bearer Type
used
selecting
radio for
bearer
type. users in
congestion control and load
control
Mobile Network Code
Service Direction used

in Application Priority
Mapping

segment of the Basic Priority.
It is used in the mapping of
the
ThisApplication
parameter Priority.
indicates the
service direction used in
application priority mapping.
The uplink application priority
is mapped from uplink rate,
and downlink application
priority is mapped from
downlink rate
RNC
HSPA Evolution
/HSDPA Packet
Scheduling
RNC
HSPA Evolution
UTRAN Cell and Basic Identification

PLMN
Parameter
UTRAN Cell and Basic Identification

PLMN
Parameter
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell and

QoS Guarantee
PLMN

segment of rate. It is used in
Rate Segment
the mapping of the
Application Priority.
Qqualmin-offset is used for
restricting PLMN ping-pong
reselection when cell
Qqualmin-offset(dB)
selection and reselection. In
cell selection and reselection:
Squal = Qqualmeas
(Qqualmin + QqualminOffset)
Qqualmin-offset Present whether the Qrxlevmin-offset
will
be broadcastisinused
SIB3for
QrxlevminOffset
restricting PLMN ping-pong
reselection when cell
selection and reselection. In
Qrxlevmin-offset(dB)
cell selection and reselection:
Srxlev = Qrxlevmeas
(Qrxlevmin +
QrxlevminOffset)
Pcompensation
Qrxlevmin-Offset
whether the Qrxlevmin-offset
Present
will be broadcast in SIB3
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
UTRAN Cell
Idle Mode and

Common Channel
Behavior //Node B
Management
UTRAN Cell
Admission Control
UTRAN Cell
Admission
Control /HSDPA
Introduction
UTRAN Cell
Admission
Control /Overload
Control /hsupa
packet schedule
UTRAN Cell
MBMS /Admission
Control
MBMS Traffic Number

Limit

maximum number of MBMS
users in the cell. It will be
UTRAN Cell
guaranteed by admission
control mechanism.
MBMS /Admission
Control
Channel Type Indicator

for Downlink Enhanced
CELL_FACH Priority
Queue
Channel Type Indicatior

Indication for Downlink
Enhanced CELL_FACH
Priority Queue
HSPA Evolution
Maximum Number of
Users on E-DCH
Maximum Number of
Users on HS-DSCH
Maximum Target
Received Total
Wideband Power(dB)
MBMS Throughput
Threshold(kbps)

maximum number of E-DCH
users in the cell. It will be
guaranteed by admission
control mechanism.
This
parameter
indicates
maximum
number
of HS- the
maximum
target
UL
DSCH users in the cell. It will
interference
forby
a certain
cell,
be guaranteed
admission
including
received
wide
band
control mechanism.
power from all sources,
which is an offset relative to
the UL interference when
there is no load in the cell.
This parameter is used by
the Node B scheduler. As a
result of scheduling, the total
This
indicates
the
risingparameter
RTWP caused
by the
maximum
throughput
uplink services
shouldfor
not
MBMS
in a cell.
exceed traffic
this target
value.
UTRAN Cell
Discard Timer , which defines

the time to live for a MAC-hs
SDU starting from the instant
of its arrival into an HSDPA
Discard Timer(ms)
Priority Queue. The Node B
shall
use thisrelease
information
Re-ordering
timerto
discard
out-of-data
MAC-hs
(T1).
The
Re-ordering
SDUs
the
releasefrom
timer
T1HSDPA
controls the
Priority
Queues.
stall avoidance in the UE
Re-ordering Release
reordering buffer. Correctly
timer(T1)
received MAC-hs PDUs will
be delivered to the upper
layers
when
Whenofthe
Timer in
multiples
T1timer
Reset Timer Controlling T1expires.
values .which is used to
the Reset of the MACcontrol the reset of the MACehs Reordering
ehs reordering functionality in
Functionality
CELL_FACH or CELL_PCH .
whether Discard Timer is
Discard Timer
configured for the downlink
Configuration Indication
Enhanced CELL_FACH
queue.
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
The configured power for HSEnhanced CELL_FACH PDSCH, which is a power

UTRAN Cell
HS-PDSCH Power(dB) level relative to the
configured in a cell.
HSPA Evolution
The configured power for HSEnhanced CELL_FACH SCCH, which is a power level
UTRAN Cell
HS-SCCH Power(dB)
relative to the configured in a
cell.
HSPA Evolution
MAC-ehs Queue Identity MAC-ehs queue identity
UTRAN Cell
HSPA Evolution
MAC-ehs Window Size
MAC-hs Window Size, which

is used for MAC-hs PDU
UTRAN Cell
retransmission
HSPA Evolution
Maximum MAC-c PDU

Size for Flexible PDU

Maximum MAC-c PDU Size
UTRAN Cell
for flexible PDU in Downlink
Enhanced CELL_FACH.
HSPA Evolution
Indicates the priority of MacScheduling Priority

hs . Used for Mac-hs
Indicator for Downlink
scheduling. The larger of the UTRAN Cell
Enhanced CELL_FACH
value, the higher of the
Priority Queue
priority.
HSPA Evolution
Cell Identity
this parameter indicates the

Cell Identity of the downlink
Enhanced CELL_FACH
Mobile Country Code

RNC and PLMN
Parameter
internationally.
Mobile Network Code

(decided by MCC).

number of segments of
ARP Segment Number
(ARP),
which is indicates
used in the
This parameter
the
mapping
of
the
Basic
Priority
(BP).
(ARP) segment threshold.
The ARP assigned by core
network in RAB
ARP Segment Threshold
ASSIGNMENT REQUEST
will
mapped by
RNC tothe
Thisbe
parameter
indicates
This
parameter
indicates
the
different
ARP
segment
number of segments ofupon
the
nominal
bit
rate
for
downlink
this
parameter.
Basic Priority (BP). It is used
MAX_ARP_SEGMENT=15.
Basic Priority Segment interactive/background
in
the mapping of the
services
on Priority
DCH. It(SP),
is
Number
Scheduling
the
mapped
from
the
Basic
This
parameter
indicates
the
Application
Priority
(AP) used
Priority,
higher(BP)
basic
priority
Basic
segment
in loadPriority
control
and
traffic
has higher
nominal
bit
threshold.
The
Basic
Priority
congestion
control.
rate.
DRBC
scheduling
need
mapped
from
RAB parameter
Basic Priority Segment sort order of online service,
assigned by core network will
Threshold
The
servicestowith
a current
be mapped
different
BP
rate
smaller
than
the
segment upon this NBR
are
put into the foremost set
parameter.
(set1),
the services with a
MAX_BP_SEGMENT=16.
DCH Downlink Nominal current rate equal to the NBR
Bit Rate(kbps)
are put into set2, and the
services with a current rate
larger
than the NBR
are put
This parameter
indicates
the
into
the
last
set
(set3).
number of segments ofThen
the
the services
in each
set are
Traffic
Handling
Priority
THP Segment Number sorted according to their
(THP), which is used in the
scheduling
The
mapping
of priorities(SP).
the Basic
Priority
This
parameter
indicates
the
service
ranking
foremost
will
(BP)
Traffic
Handling
Priority
be scheduled
first.
(THP)
segment
threshold.
Where MAX_BP is the
The THP will be mapped by
THP Segment Threshold maximum number of the
RNC
different
THPequals
Basicto
Priority,
which
segment
upon
this
to 16.
parameter. MAX_ THP
_SEGMENT=15
This parameter describes
Dual-Cell HS-DSCH
whether Dual-Cell HS-DSCH
Support Indication
This
parameter indicates
is supported.
whether the function of radio
link timing adjusting is used:
if the value is "Off", the UE
Switch for RL Reference
internal Mesurement(Event
Time Adjust During
6G/6F) used to trigger radio
Diversity Mode
link timing adjusting will not
be setup; else the
Mesurement(Event 6G/6F)
will be setup
RNC and PLMN
Parameter
RNC
QoS
RNC
HSPA Evolution
RNC and PLMN Handover Control
Transport Band Width

CELL_FACH(Kbps)
The transport band width

allocated for Downlink
Enhanced CELL_FACH.
Basic Priority (BP) which is a
kind of service priority
mapping from RAB
Basic Priority
parameters such as ARP,
traffic class and THP. It is
used in other RRM priority
mapping.
Bearer Type
This
indicates the
radioparameter
bearer type.
Scheduling Priority
configuration index. There
are several different sets of
configuration of the
Scheduling Priority Index Scheduling Priority
configured in RNC level and
different cells can use this
This
parameter
indicates
parameter
to index
the the
Scheduling
Priority
different
sets
of indicates
the (SP) the
This
parameter
mapped
fromconfiguration
Basic priorityof
configuration
seperately.
index
of the
Scheduling Priority
(BP)
and
bearer
type. It is
the set of the admission
used
in
scheduling
realon
control parameters the
based
queue
and
pre-emption.
the Basic Priority. Different
requirements make different
configurations of the
Basic Priority AC Index
parameters. And different cell
can use this parameter to
index different configuration.
The
of parameters
This set
parameter
indicates the
corresponding
to this
index is
Application Priority Index congestion
control
priority
mapped
from
the Basicpriority
(Congestion Control)
index from
application
Priority.
configuration.
RNC
EFACH
UTRAN Cell
and PLMN
QoS Guarantee
UTRAN Cell
and PLMN
QoS Guarantee
UTRAN Cell
and PLMN
QoS Guarantee
UTRAN Cell
and PLMN
QoS Guarantee
UTRAN Cell
and PLMN
Admission Control
UTRAN Cell
and PLMN
QoS Guarantee

Cell Downlink Enhanced
Layer 2 Support
Utran Cell
downward Enhanced Layer 2
Indicator
function or not.
Application Priority Index load control priority index
This
(Load Control)
from parameter
applicationindicates
priority the
Scheduling
Priority
configuration.
configuration index. There
are several different sets of
configuration of the
Scheduling Priority Index Scheduling Priority
configured in RNC level and
different cells can use this
parameter to index the
different
sets of indicate
the
This parameter
Dual-Cell HS-DSCH
configuration
seperately.
whether Dual-Cell HS-DSCH
Support Indication
is supported in this cell.
HSPA Evolution
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell and

QoS Guarantee
PLMN
UTRAN Cell
HSPA EVOLUTION
Downlink Enhanced
CELL_FACH Support
Indicator
Cell ID
Period NodeB Common

Measurement
HS-DSCH Required
Power
Period NodeB Common
Measurement
NotusedHS-DSCH_TCP
Period NodeB Common
Measurement
RTWP
Period NodeB Common
Measurement
TCP
Period NodeB Common
Measurement
Received Scheduled EDCH Power Share
Basic Priority Used in
Admission Control
Basic Priority AC Index
Code Tree Reserved

Ratio(%)
DCH Downlink AC
Threshold(%)

whether the downlink
Enhanced CELL_FACH can
be supported by the cell.
locates.
period Node B common
measurement configuration
This
indicates
the
indexparameter
for HS-DSCH
required
period
Node
B
common
power, which is used for
measurement
configurationof
indexing the configuration
index
for
TCP
of
all codes not
the set of parametersfor
used
HS-PDSCH
or HSperiodfor
report
of HS-DSCH
SCCH
Required Power.
transmission(NotusedHSDSCH_TCP), which is used
for
the indicates
configuration
Thisindexing
parameter
the
of
the
set
of
parameters
period Node B common for
period
report ofconfiguration
TCP of all
measurement
codesfor
notRTWP,
used for
HS- is
index
which
PDSCH
HS-SCCH
used for or
indexing
the
transmission.
configuration of the set of
This
parameter
indicates
the
parameters
for period
report
period
Node
B
common
of RTWP.
index
for TCP, which
is used
This parameter
indicates
the
for
indexing
the
configuration
period Node B common
of the set of parameters
for
measurement
configuration
period
report
of TCP.
index for
Received
Scheduled E-DCH Power
Share, which is used for
the set
of parameters
for the
This
parameter
indicates
period
report of
Received
Basic Priority
used
in
Scheduled
E-DCH
Powerthe
This
parameter
indicates
admission
control
algorithm.
Share
index
of
the
configuration
of
Its value
range is
0-16, where
This
parameter
indicates
the
the
set
of
the
admission
0-15 is
thereserved
real value
range
code
tree
ratio,
control
parameters
on
for
theisBasic
and 16
which
usedPriority
in thebased
the
Basic
Priority.
Different
means
handover.
admission control algorithm
requirements
based
on codemake
tree different
reserved
configurations
the
ratio, in order toofreserve
parameters.
different
some codes And
for users
of cell
can
use
this
parameter
to
certain service type. Another
index
different
configuration.
parameter used in this
The
set ofisparameters
algorithm
the reference SF
corresponding
to this
index is
layer,
which means
the
mapped
theforBasic
reserved from
codes
the cell is
Priority.
This
parameter
indicates the
for the
service corresponding
downlink
TCP threshold
to the reference
SF layer.for
DCH
admission.
If the
These two parameters
downlink
power
exceeds
should be used together, this
and
admission
control
the reserved
codesthreshold,
number
the
new
service request
of the
reference
SF layeron
is
DCH
will not
admitted.
calculated
bybe
using
the code
This
parameter
is configured
tree reserved
ratio.
This
based
on
the
Basic
Priority.
parameter is configured
based on the Basic Priority.
UTRAN Cell
HSPA Evolution
RNC
Parameter
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control

uplink RTWP threshold for
DCH admission control. If the
uplink interference exceeds
DCH Uplink AC
this admission control
Threshold(dB)
threshold, the new service
This
parameter
the
request
on DCHindicates
will not be
uplink
RTWP
forisEadmitted.
Thisthreshold
parameter
DCH
admission.
thethe
uplink
configured
basedIfon
interference
exceeds
this
Basic Priority.
E-DCH AC
admission control threshold,
Threshold(dB)
This
parameter
the new
service indicates
requestedthe
on
downlink
TCP
threshold
for
E-DCH will not be admitted.
HS-DSCH
admission.
If the
This parameter
is configured
downlink
exceeds
this
based on power
the Basic
Priority.
HSDPA AC
Threshold(%)
the new service requested on
HS-DSCH will not be
This
parameter
indicates the
admitted.
This parameter
is
downlink
TCP
threshold
configured based on the for
MBMS
admission. If the
Basic Priority.
MBMS AC Threshold(%) downlink power exceeds this
the new MBMS service will
This
parameter
not be
admitted.indicates one
Offset of NodeB Safe
of DCH CAC conditions when
This
indicates
the
Admission Threshold
DCHparameter
CAC threshold
is higher
threshold
forThis
When DCH Has Higher MBMS
than HSload
CAC
threshold.
If cell
AC Priority than HS(%) counting/recounting.
parameter is configured
load
is on
greater
than Priority.
the
based
the Basic
threshold indicated by this
MBMS Load Threshold parameter,
Reference for
counting/recounting will be
Counting(%)
executed and the PTP /PTM
mode will be switched based
on
theuniquely
counting/recounting
MCC
identifiesthe
result.may
switch
to PTM
country thatbethe
UE users
(or
mode
based
on
the
Mobile Country Code
counting/recounting
result.
internationally.
Mobile Network Code
Background Noise
Automatic Adjustment
Switch

(decided by MCC).
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
MBMS
UTRAN Cell,
PLMN, and
Basic Priority
Related
Admission Control
UTRAN Cell,
PLMN, and
Basic Priority
Related
MBMS
RNC
Parameter
RNC
Parameter

whether background noise
UTRAN Cell
This
parameter
indicates the
adjustment
is supported.
original background noise,
which is the default
configuration
of indicates
background
This parameter
when
cell is access
setup.
Cell Downlink Admission noise
whether
downlink
UTRAN Cell
This
parameter
will take
Control Switch
control
is supported
for the
effect
cell. when the cell is setup;
This parameter will take
effect when the "Background
Noise Automatic Adjustment
Original Background
Switch" is changed from "Off" UTRAN Cell
Noise Configuration
to"On" if the cell is already
setup;
This parameter will take
effect when the "Background
Noise Automatic Adjustment
Switch" is changed from "On"
to "Off" if the cell is already
setup.
Admission Control
Admission Control
Admission Control

This
parameter
indicates
reference
SF layer,
whichthe
nominalthe
path
loss. It codes
is used
means
reserved
to
predict
the
power
for
the
cell
is
for
the
service
Nominal Pathloss
increasement
correspondingof
tonew
the
downlink
service
request
reference SF layer.
This in
call
admission
control.
parameter is used in the
admission control algorithm
Reference SF Layer
based on code tree reserved
Used for Code
This
ratio,parameter
in order toindicates
reserve the
Reservation in CAC
maximum
of for
signaling
user
some codes
users of
numbers
on DCH
in the
cell.
certain service
type.
Another
If
the
new
"RRC
setup
parameter used in this
Threshold of the
request"
DCH
will
algorithmsetup
is theon
Code
Tree
Number of the RRC
lead
the number
of signaling
Reserved
Ratio,
from
which
Signaling Users Co-Exist
uses
exceed codes
this threshold,
the reserved
number
in the Cell
this
new
"RRC setup
of the
reference
SF layer is
request"
will not be accepted
calculated.
This
parameter
the
on
DCH
,
and it indicates
will attempt
Maximum Number of
maximum
number
of Users
on
FACH.
This
parameter
indicates
the
Users on Downlink
can
be carried
on Downlink
Background
Noise
Automatic
Enhanced CELL_FACH
Enhanced
AdjustmentCELL_FACH
Scene, which is
used to distinguish difficult
scene or easy scene for
Background Noise
Background Noise
Automatically Adjusting. The
Scene
easier to adjust, the less
error between Background
Noise
and the real
value, but
This parameter
indicates
mistakenly
adjusting
maybe
Common Measurement which
type of
measurement
happen.
Type
that shall be performed by
Node B.
measurement filter
Measurement Filter
coefficient, which determines
Coefficient
the amount of filtering to be
applied for measurements.
This parameter indicates on
which type of object that the
Common Measurement
measurement shall be
Object Type
performed,
which
can onlythe
be
This parameter
indicates
cell.
Node B common
NodeB Common
index. Each Node B common
Measurement
Configuration Index
index uniquely identifies a set
of parameters configured in
This
Nodeparameter
B commonindicates the
usage,
function etc. of the
measurements.
Function of
configuration parameters
Configuration
indicated
by theindicates
Node B the
This parameter
Parameters
common
measurement
report period, which and the
configuration
choice report index.
periodicity
scale together determine the
frequency with which the
Report Period
Node B shall send
measurement reports. These
two parameters only applies
for periodic report and event
E/F.
UTRAN Cell
Admission Control
UTRAN Cell
Admission Control
UTRAN Cell
Admission Control
UTRAN Cell
Admission Control
Utran Cell
Admission Control
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
UTRAN Cell
NodeB
Management
Choice Report
Periodicity Scale
Report Characteristics
Cell Uplink Admission

Control Switch

choice report periodicity
scale, which and the report
period together determine
the frequency with which the
UTRAN Cell
Node B shall send
measurement reports. These
two parameters only applies
for
report
and event
Thisperiodic
parameter
indicates
the
E/F. characteristics of how
report
UTRAN Cell
the reporting shall be
performed by Node B.
whether uplink access control UTRAN Cell
is supported for the cell.

default CPICH Ec/No. It is
used to predict the power
Default CPICH Ec/No
increasement of new
downlink service request in
call admission control.
maximum number of the
True Queue Length
congested calls in the true
queue.
maximum time length that
Time of True Queue for the call can stay in the true
Congested Service in
queue,
after theindicates
call setupthe
This parameter
RAB Setup Process(s) requirement
is
refused
by the
maximum time length that
Call
Admission
Control
(CAC)
the
service,
which
relocates
the
algorithm.
into UTRAN,
canfor
stay
in the
nominal
bit
rate
uplink
Time of True Queue for
true queue after the
interactive/background
Congested Service
relocationonrequirement
services
DCH. It is is
Relocating into
refused by
thethe
CallBasic
mapped
from
UTRAN(s)
Admission
Control
(CAC)
Priority
, higher
basic
priority
algorithm.
traffic
has higherisnominal
This parameter
a switchbit
Value
0indicates
means
no
queue
scheduling
need
Switch of Required Rate rate.
whichDRBC
whether
a
process.
sort
order
of
online
service,
Decreasing for Online
congested user can trigger
The
services
with a current
Users in Congestion
required
rate decreasing
of
rate
smaller
thanindicates
This
parameter
the
the online
users
inthe
theNBR
cell.
are put into
the foremost
transport
channel
BLER set
(set1), the
services
a
quality
target,
whichwith
is the
DCH Uplink Nominal Bit current
equal power
to the NBR
base of rate
outerloop
When
Rate(kbps)
are
putthe
into
set2,
andperiod
the
control.
Fortolerance
the service
withis
not
over,
the
number
error
services
with
a subflow,
currentofrate
more
than
one
this
block
exceed
the error
larger is
than
the
NBR
are
put
parameter
is
applied
for the
block
threshold,
then adjust
into the
last set (set3).
Then
first
subflow.
the
the SIRtarget
services
inupward;
each
are
Signalled
value
is setwhen
Tolerance BLER
the
tolerance
period
is
sorted
according
to their
Log10(Transport channel
Period(TBs)
arrived,
the priorities(SP).
number
error
scheduling
The
BLER quality
target),ofi.e.
block
is ranking
smaller
than
service
physical
value Pforemost
in TSerrorwill
block
threshold,
then adjuct
be scheduled
first.
25.331
is Log10(actural
the
SIRtarget
downward,
Where the
MAX_BP
the Delse
value);
scalarisvalue
in
do
nothing.
maximum
the
BLER Target
TS
25.331number
is P*10;ofvalue
Basic
Priority,
which equals
configured
in database=
to 16. acutual value
D+63;
configured through manmachine interface in the
background=10^P, listed in
exponential form, see the
table in value range.
Method of calculation:
BLEREVAL=1: 63;
BLER=10.^((BLEREVAL63)/10);
NodeB
Management
NodeB
Management
Admission Control
UTRAN Cell
Admission Control
RNC
Congestion Control
RNC
Congestion Control
RNC
Congestion Control
UTRAN Cell
parameter for
future use
RNC
QoS
Guarantee/Congest
ion Control/ HSUPA
Introduction
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
Threshold of Sample
Number to Adjust SIR
Target Downward(10ms
E-TTI)
E-DCH HARQ Power

Offset FDD
Error Transport Block

Number Threshold(TBs)
Maximum Number of
Retransmissions for EDCH
NHR Threshold to Adjust

SIR Target Downward
(10ms E-TTI)

SIR Target Upward
(10ms E-TTI)
Threshold of Sample
Target Upward (10ms ETTI)
The Number Threshold
of Physical Channel
BER Less Than or Equal
BER Target
Physical Channel BER

Target For Normal Mode

Target For Silent Mode
Step Size of Downlink

Inner Loop Power
Control(dB)
to decrease SIR target when

E-TTI=10ms. The SIR target
This
parameter
indicates
the
can not
be decreased
unless
E-DCH
HARQ
powernooffset
the sample
number
less
FDD,
which
is usedWhen
to
than the
threshold.
compute
the
quantized
HARQ retransmission orgain
factor
of E-DPDCH.
For
failure ed
is recorded
once then
detail
descriptions
please
a sample
is obtained.
And if
refer
to HARQ
TS25.214.
find no
We
get
this parameter
retransmission,
it also is a
according
to get
E-DCH
sample. We
this user
number
level
as
following:
parameter according
to EE-DCH
user
number
lowas
DCH user
number
level
level
E-DCH user number
following:
medium
levelnumber
E-DCH
E-DCH user
lowuser
number
high
level
level E-DCH user number
This
parameter
indicates
the
EdchHarqPOFdd[0]
medium
level E-DCH
user
error
transport
block number
EdchHarqPOFdd[1]
number
high level
threshold
in outer loop power
EdchHarqPOFdd[2]
DwThrSampNuTti10[0]
control
using
threshold
Note:
Now, the
E-DCH
DwThrSampNuTti10[1]
algorithm.
When
theisnumber
HARQ
power
offset
related
DwThrSampNuTti10[2]
of
error
blocksE-DCH
exceeds
the
This
parameter
indicates
the
to the
default
user
thresholdof
wthin
a period,
number
HARQ
level
RNC
shall increase
the
SIR
retransmission
(NHR)
DefaulEdchNumLev.
That
This
parameter
indicates
the
target
immediately.
threshold
to
decrease
SIR
means thenumber
E-DCH of
HARQ
maximum
target
power when
offset E-TTI=10ms.
is for the sub
retransmissions
When
the
NHR
is beared
less than
EdchHarqPOFdd[DefaulEdch
service
when
it is
on
This
parameter
indicates
the
the
threshold,
RNC
NumLev-1].
E-DCH. of HARQ shall
number
decrease
the SIR
target. It is
retransmission
(NHR)
only applicable
for theSIR
threshold
to increase
services
carried
on E-DCH.
This
indicates
the
targetparameter
when
E-TTI=10ms.
We
get
this
parameter
hreshold
sample
number
When theofNHR
exceeds
the
according
E-DCH
user
to
increaseto
SIR
target
when
threshold,
RNC
shall
number
level
as
following:
E-TTI=10ms.
The
SIR
increase the SIR target.target
It is
E-DCH
user
number
can
be increased
unless
only not
applicable
for thelow
levelsample
E-DCH
user
the
number
no less
services
carried
on number
E-DCH.
medium
level
E-DCH
user
than
thethis
threshold.
When
We get
parameter
number
high
level
HARQ
retransmission
or
according
to E-DCH
user
This
parameter
indicates
the
NhrThrDownTti10[0]
failure
islevel
recorded
once then
number
as
following:
BER
target
for
a
physical
NhrThrDownTti10[1]
a
sample
is obtained.
And if
E-DCH
user
number
low
channel
out Valid
Time
NhrThrDownTti10[2]
find
no
HARQ
level
E-DCH
number
This
parameter
indicates
the
Windows
whenuser
the
FPisMode
retransmission,
it also
a
medium
level
E-DCH
user
number
threshold
of
physical
is
normal,
which
is the base
sample.
We
get
this
number
high
level
channel
BER
less
than
or
of
outerloop
power
control
This
parameter
indicates
parameter
according
to E-the
NhrThrUpTti10[0]
equal
BER
target
in the
method
using
physical
BER
target
for
a physical
DCH
user
number
level as
NhrThrUpTti10[1]
uplink
outer
loop
power
channel
BER.
channel
in
Valid
Time
following:
NhrThrUpTti10[2]
control
QE based
algorithm.
If
QE-Selector
isthe
set
to
Windows
when
mode
E-DCH
user
number
low
When
the
number
ofFP
physical
'Selected'
and
the
transport
is
silent,
which
is
the
base
of
level
E-DCH
user
number
channel
BER
less
than or the
channel
BER
is E-DCH
available
outerloop
power
control
medium
level
user
equal
BER
target
is
greater
transport
channel
BER shall
method
using
physical
number
high
level
than
orbase
equal
to
theQE
number
be
the
for
the
channel
BER.RNC shall in the
UpThrSampNuTti10[0]
of
threshold,
UL
data frames.
noto
If
QE-Selector
is Ifset
UpThrSampNuTti10[1]
decrease
the SIR
target
transport
channel
BER
is
'Selected'
and the transport
UpThrSampNuTti10[2]
immediately.
available
for
the
selected
channel BER is available the
DCH,
the channel
physicalBER
channel
transport
shall
BER
shall
be
used
be the base for the for
QEthe
in the
QE.
If theframes.
QE-Selector
UL data
If no is set
to
"Non-selected",
the is
transport
channel BER
physical
channel
BER
shall
available for the selected
be used
for
the QEchannel
in the UL
DCH,
the
physical
This
parameter
indicates
the
data
frames.
When
mixed
BER
shallfobethe
used
for
the
step
size
downlink
services
used, the is set
QE.
Ifloop
theare
QE-Selector
inner
power
control.
combination
method
is to
to
"Non-selected",
the
Normally,
the
value
in good
take
the
minimum
value
physical
channel BER
shall
channel
condition
is smaller
among
all
be used
forthe
the QE in the UL
than
in
bad
channel
QePhyBerTarNorm
data
frames. When values
mixed of
condition.
the
mixedare
services.
services
used, the
combination method is to
take the minimum value
among all the
QePhychBerTarSil values of
the mixed services.
UTRAN Cell and

Power Control
Service Related
Service Related Power Control
UTRAN Cell and

Power Control
Service Related
Service Related Power Control
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and Parameter for

Service Related future use
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
Step Size of Uplink Inner

Loop Power Control(dB)
Traffic PC Index
Uplink Inner Loop Power

Control Algorithm
Uplink SIR Target Down

Step Size(dB)
Uplink SIR Target Up

Step Size(dB)
Uplink SIR Target

Maximum Down Step
Size(dB)
Cell Uplink Enhanced

Layer 2 Support
Indicator

TPC step size for uplink inner
loop power control. Only
when inner loop power conrol
algorithm 1 is selected, this
parameter needs to be
This
parameter
is a
configured.
For algorithm
2,
configuration
Index
default value of
TPCwhich
step
indicates
a set
of parameter
service
size is 1 and
this
related
power
control
is not needed.
parameters. Each cell
obtains
the service
related
This parameter
indicates
power uplink
controlinner
parameters
which
loop power
according
to the index
control algorithm
is used. For
indicated
by
thisindicates
parameter.
This
parameter
the
algorithm 1 inner
loop power
step
of
decreasing
the
uplink
control is done every time
SIR
In order2to
restore
slot. target.
For algorithm
inner
communication
quality
as
loop power control is done
soon
possible
everyas
5 tim
slots. when it
This
parameter
the
becomes
worseindicates
and
step
of increasing
the uplink
decrease
the communication
SIR
target.
In when
order to
quality
slowly
it restore
communication
as it
becomes better quality
(to make
soon
possible
more as
reliable),
thewhen
stepsit of
becomes
and
increasingworse
and decreasing
decrease
the
communication
are set asymmetricly so there
quality
when itused
are twoslowly
parameters
becomes
separately.better (to make it
more reliable), the steps of
increasing and decreasing
are
asymmetricly
so there
Thisset
parameter
indicates
the
are
two
parameters
used
maximum step of decreasing
separately.
the uplink SIR target.
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related

UTRAN Cell
Uplink Enhanced Layer 2
function or not.

support type of RLC felxible
PDU size format for uplink
signaling and service.
Uplink Conversational
service maximum size in
Service Maximum Uplink
octets of the uplink RLC PDU
RLC PDU Size
in the flexible RLC PDU size
mode.
service minimum size in
Service Minimum Uplink
RLC PDU Size
mode.
Uplink NonUplink Non-Conversational
Conversational Service service maximum size in
Maximum Uplink RLC
PDU Size
mode.
Support Type of Uplink
RLC Flexible PDU Size
Format
UTRAN Cell and

Power Control
Service Related
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
Uplink NonConversational Service

Minimum Uplink RLC
PDU Size
Adjacent Cell Uplink
Enhanced Layer 2
Support Indicator

Target(%)
BER Target Adjust Timer

in Fast OLPC SIR Target
Downward Adjustment
Based on BER
Number Threshold for
BER Target Adjust in
Fast OLPC SIR Target
Downward Adjustment
Based
on BER
Transport
Block Number
Threshold for BER
Target Adjust in Fast
OLPC SIR Target
Downward Adjustment
Based on BER
BER Target Down Step
Size in Fast OLPC SIR
Target Downward
Adjustment Based on
BER
BER Target Up Step
Size in Fast OLPC SIR
Target Downward
Adjustment Based on
BER
Maximum BER Target in
Downward Adjustment
Based on BER
Minimum BER Target in
Downward Adjustment
Based on BER
Uplink Outer Loop PC
SIR Target Adaptive
Down Step Size Switch
This
This parameter
parameter indicates
indicates the
the
BER
target
for
a
physical
Uplink Non-Conversational
channel,
which is size
the base
service minimum
in of
outerloop
power
control
method
using RLC
physical
in the flexible
PDU size
channel
BER.
mode.
If
QE-Selector
set to
This
parameterisindicates
'Selected'
and
the transport
whether the
adjacent
cell
channel
is available the
supportsBER
the Uplink
transport
shallor
Enhancedchannel
Layer 2BER
function
be
the
base
for
the
QE
in the
not.
UL data frames. If no
transport channel BER is
available for the selected
DCH, the physical channel
BER shall be used for the
This
indicates
the
QE. Ifparameter
the QE-Selector
is set
BER
target
adjust
timer
in
to "Non-selected", the
fast
OLPC
SIR target
This
parameter
indicates
the
physical
channel
BER shall
downward
adjustment
based
transport
block
be used for
the number
QE in the
UL
This
parameter
indicates
on
BER.
When
the
timer
threshold
for BER
target
data
frames.
When
mixedthe
error
transport
block
number
expires,
target
will
adjust
in the
fastBER
OLPC
SIR
services
are
used,
the
threshold
for
BER
target
be
adjusted.
target
downward
adjustment
combination
method
is to
adjust
in
fast
OLPC
SIR
based
onminimum
BER.
If the
take the
value
target
downward
adjustment
transport
block
number
is not
among all the
based
on BER.
If the
number
larger
than
the BerTbThresh
QeTrchBerTarget
values
of
of
blocks
is larger
and
error
transport
blockthan
theerror
mixed
services.
the
threshold
period,
number
is notwithin
largerathan
the
the
BER
target
will
be
BerErrorTbThresh, the BER
decreased.
target
will be kept.
If the the
This parameter
indicates
transport
block
number
is
step of decreasing the BER
larger
than
the
BerTbThresh
target in fast OLPC SIR
and
the
error transport
block
target
downward
adjustment
number
is
not
larger
than
based on BER. When the the
BerErrorTbThresh,
the BER
quality
of traffic channel
This
parameter
indicatesisthe
target
will be
adjusted
becoming
bad,
the
BER
step
of increasing
the BER
depending
ondecreased
the BER
target
target
will
be
a
target
in
fast
OLPC
SIR ifbythe
adjusting
trigger
cause:
step
one
time
to
decrease
target
downward
adjustment
trigger
cause isofSIR
the
possibility
SIRtarget
target
based
on
BER.
When
thewill
increase,
the
BER
target
decreasing
due
to the
BER
quality
of
traffic
channel
is
be decreased,
or else the
based
OLPC
algorithm.
becoming
good,
the
BER
BER target will be increased.
target
will be increased
a
This parameter
indicatesbythe
step
one
time
to
increase
the
maximum BER target in fast
possibility
SIR target
OLPC SIRoftarget
downward
decreasing due
to on
theBER.
BER
adjustment
based
based
OLPC algorithm
This parameter
value is used
to
give
the rangeindicates
for BERthe
This
parameter
target
in
the
BER
based
minimum BER target
in fast
OLPC
algorithm.
OLPC SIR target downward
adjustment based on BER.
This parameter value is used
to give the range for BER
target in the BER based
This
parameter
OLPC
algorithm.indicates
whether uplink outer loop
power control(OLPC) based
on SIRtarget adaptive down
step size is used or not.
RNC
HSPA Evolution
External UTRAN
HSPA Evolution
Cell

RNC
Parameter for
future use




RNC
Parameter for
future use
RNC
Parameter for
future use
UTRAN Cell and

Power Control
Service Related
Cell Counting Switch
Cell ID

whether MBMS counting is
supported for the cell. If it is
"Off", UEs in the cell will not
be counted/ recounted and
their MBMS services will be
carried in PTM mode.
locates.

locates.
UE traffic volume
UE Traffic Volume Event measurement configuration
Measurement
number for DCH, used for
Configuration Number
indexing a set of parameters
for DCH
configured
for UE
traffic the
This parameter
indicates
volume
event
measurement
UE traffic volume periodic
for
DCH.
UE Traffic Volume
measurement
configuration
Period Measurement
for DCH
configured
for UE
traffic the
This parameter
indicates
volume
periodic
user plane traffic volume
measurement
DCH.
UP Traffic Volume
measurement for
configuration
Measurement
for DCH
configured
for user
plane the
This parameter
indicates
traffic
volume
measurement
user plane Traffic volume
for
DCH.
UP Traffic Volume
measurement
configuration
Measurement
number for E-DCH, used for
for E-DCH
configured
for user
plane the
This parameter
indicates
Traffic
volume
measurement
for
E-DCH.
UP Traffic Volume
measurement
configuration
Measurement
number for FACH, used for
This
parameter
the
indexing
a set ofindicates
parameters
user
plane traffic
volume
for FACH
configured
for user
plane
measurement
configuration
traffic volume measurement
UP Traffic Volume
number
for
interactive
or
for FACH.
Measurement
background service on HSConfiguration Number
DSCH, used for indexing a
for Interactive and
set of parameters configured
Background Class on
This
parameter
indicates
the
for user
plane traffic
volume
HS-DSCH
UE
traffic volume
event
measurement
for interactive
UE Traffic Volume Event measurement
or backgroundconfiguration
service on
Measurement
number
for RACH, used for
HS-DSCH.
for RACH
configured
for UE
traffic the
This parameter
indicates
volume
event
measurement
UE traffic volume periodic
for
RACH.
UE Traffic Volume
measurement
configuration
Period Measurement
number for RACH, used for
for RACH
configured for UE traffic
volume periodic
measurement for RACH.
Cell Identity
UTRAN Cell
MBMS
UTRAN Cell
Parameter
UTRAN Cell
Parameter
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UP Traffic Volume
Measurement
for Streaming Class on
HS-DSCH
E-DCH UP Throughput
Measurement
for E-TTI Switching
Switch of CS voice over

HSPA
Quality Measurement
Switch for VoIP/ CS
Voice
C Traffic Rate Threshold
Used for Determining
NRT PS Rate Upper
Limit(kbps)
Switch for DCH Rate
Adjustment Based on
Traffic Volume
Measurement
Event 4A Counter
Threshold for Increasing
Rate on DCH or DCH>HSPA
Event 4B Counter
Threshold for
Decreasing Rate on
DCH
Switch for DL DCH Rate
Adjustment Based on DTCP
Wait Timer for Adjusting
Uplink and Downlink
Reconfiguration by One
Step Downward
DRBC Method Switch

number for streaming service
on HS-DSCH, used for
configured for user plane
traffic volume measurement
This
parameter
indicates
the
for streaming
service
on HSuser
plane
throughput
DSCH.
number for E-DCH, used for
E-TTI Switching.
whether CS voice over HSPA
is supported or not. If it is
This
indicates
"On",parameter
CS voice over
HSPA is
This
parameter
indicates
whether
channel
transferring
allowed,
otherwise
not the
conversational
for
C (VoIP/ CStraffic
voice)rate
allowed.
threshold
usedon
forevent 1F is
service based
determining
I/Bswitch
PS traffic
rate
allowed. If this
is "On",
upper
limit
when
Multi-RABs
switching from HS-DSCH /Eare
(CS orto
DCHconversational
or HS-DSCH/DCH
PS)
+
DCH/DCH based on event
streaming/interactive/backgro
1F for the VoIP /CS voice
und
PSisand
channel
type is
serive
allowed;
otherwise
DCH/DCH+DCH/DCH.
If the
not allowed.
rate of the C service is not
This
parameter
greater
than thisindicates
threshold,
whether
rate
"NRT PSDCH
Traffic
Rate Upper
adjustment
on traffic
Limit parameter
When based
Lowindicates
Rate
C the
This
volume
measurement
Traffic+
Traffic"
is is
event
4APS
counter
threshold
supported.
this
switch
is or
adopted
forIfPS
rate
for increasing
rate
onupper
DCH
"Off",
it
is
invalid
for
DCH
limit;
"otherwise
NRT
PS
DCH->HSPA. For the UE rate
adjustment
based
traffic
TrafficDCH
Ratein
Upper
Limit
using
both on
directions,
volume
measurement;
High
Rate
Traffic+
ifWhen
the times
of
theCmeasured
otherwise,
PS Traffic"
is
adopted.
RLC
buffervalid.
payload
of the
This
parameter
indicates
uplink or downlink
being the
event
counter
larger 4B
than
the 4Athreshold
threshold
for
decreasing
rate on DCH.
exceed the threshold
For
the UE
DCH in
indicated
byusing
this parameter,
both
if the
times
UE's directions,
data rate on
DCH
will of
the
measuredorRLC
be increased
UE buffer
will be
payload
of the
uplink
transferred
from
DCHor
to
This
parameter
indicates
downlink
being
less
than the
HSPA.
whether
DL DCH
ratethe
4B threshold
exceed
adjustment
based
threshold indicatedon
byD-TCP
this
measurement
is
supported.
parameter, UE's data rate onIf
this
"Off", it is invalid
DCHswitch
will beisdecreased.
for DCH rate adjustment
This
parameter
based
on D-TCPindicates
when
uplink or otherwise,
downlink
measurement;
meets
valid. the requirements for
rate adjustment
(downswitching) first, the wait
timer for waiting the opposite
direction reconfiguration by
This
parameter is a switch
one step.
which indicates whether the
dynamic radio bearer control
algorithm is supported for the
uplink and downlink services.
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
RNC and PLMN CS over HSPA
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
Event A Counter
Threshold for PS on DL
DCH or DL AMR
Decreasing Rate Based
on D-TCP
Event B Counter
Threshold for Restriction
PS Increasing Rate on
DL DCH or Triggering
DL AMR Increasing Rate
Based on D-TCP
Delay Time Threshold of
D/D->HS/D or HS/E
after HS/D or HS/E
->D/D Triggering by
Channel Quality(s)
Event 4B Counter
Threshold for
CELL_DCH to Idle
Shared by Uplink and
Downlink
Event 4B Counter
Threshold for
CELL_DCH to PCH
Downlink
Event 4B Counter
Threshold for HSPA
Using DTX/DRX or
CELL_FACH using DRX
to PCH or IDLE Shared
by Uplink and Downlink
Event 4A Counter
Threshold for
CELL_FACH to
CELL_DCH Shared by
Uplink and Downlink
Switch of Transferring to
CELL_FACH
Event 4B Counter
Threshold for
CELL_FACH without
DRX to Idle Shared by
Uplink and Downlink
Event 4B Counter
Threshold for
CELL_FACH without
DRX to PCH Shared by
Uplink and Downlink
HS/D->D/D or HS/E>D/D Based on Quality
Measurement Switch for
I/B Traffic

event A counter threshold of
consecutive DTCP reports. If
the times of dedicated
This
parameter
the
transmitted
codeindicates
power being
event
B
counter
threshold
of
larger than the event A
consecutive
DTCP
reports.
If
threshold exceed the
the
times
of
dedicated
transmitted
power being
parameter, itcode
will trigger
less
than PS
the or
event
downlink
AMRB
threshold
decreasingexceed
rate. the
This
parameter
parameter,
it willindicates
trigger that
after
switching
from HSdownlink
AMR increasing
DSCH/DCH
rate or
allow or
PSHS-DSCH/Eservices the
to
This
parameter
indicates
DCH
to
DCH/DCH
triggered
increase
on DL
DCH
event
4B rate
counter
threshold
by
quality,
thisstate
timer
based
on traffic
volume
for channel
CELL_DCH
to
idle
starts.
When
it
expires,
report.
shared by uplink and
switching when
from DCH/DCH
downlink
PCH is notto
HS-DSCH/DCH
supported by UEororHSUTRAN.
DSCH/E-DCH
is allowed.
For
the
UE
in
CELL_DCH
state,
if the
times threshold
of the
event 4B
counter
measured
RLC
buffer
for CELL_DCH to PCH
payload
of uplink
the uplink
This
parameter
indicates
shared
by
and and the
downlink
zero
event
4B being
counter
threshold
downlink.
For the
UEexceed
in
the
threshold
indicated
for
HSPA
using
DTX/DRX
or
CELL_DCH state, if theby
times
this
parameter,
UE
will
be
CELL_FACH
using
DRX
to
of the measured RLC buffer
transferred
from
CELL_DCH
PCH
or IDLE
shared
by
payload
of the
uplink
and
to
idle
state.
uplink
and
downlink.
For
the
downlink being zero exceed
HSPA
UE using
the
the threshold
indicated
by
DTX/DRX
and CELL_FACH
this parameter,
UE will be
This
parameter
using
Enhanced
UE DRX,the
if
transferred
fromindicates
CELL_DCH
event
4A
counter
threshold
the
times
of
the
measured
to PCH.
for
CELL_FACHRLC
buffer payload of the
>CELL_DCH.
For the
UE in
uplink and downlink
being
CELL_FACH
state,
if
the
zero exceed the threshold
times
of the
RLC
indicated
by measured
this parameter,
buffer
of the uplink
UE willpayload
be transferred
from
or
downlink
being larger
HSPA
or CELL_FACH
tothan
the
the
PCH4A
orthreshold
IDLE, andexceed
it is prior
threshold
indicated
by thisthe
This
parameter
indicates
to PCH
state.
This
parameter
indicates
parameter,
UE will
be
event
4B counter
threshold
whether
transferring
from
transferred
from without
for
CELL_FACH
other
transport
channel
to
CELL_FACH->CELL_DCH.
Enhanced
UE DRX to idle
FACH
is
allowed
or
not.
state shared by uplink and
downlink when PCH is not
supported
by UEindicates
or UTRAN.
This
parameter
the
For
the4BUE
in CELL_FACH
event
counter
threshold
state,
if the timeswithout
of the
for CELL_FACH
measured
RLC
buffer
Enhanced UE DRX to PCH
payload
of uplink
the uplink
shared by
and and
downlink
being
zero
downlink.
For the
UEexceed
in
This
parameter
indicates
the threshold
indicated
by
CELL_FACH
state,
iffrom
the
whether
transferring
this
parameter,
UE will RLC
be
times
of
the
measured
HS-DSCH
to
DCH
for
transferred
from
buffer
payload
ofCELL_FACH
the uplink
interactive/
background
to
idle
state. being zero
and
downlink
service
based on event 1F is
exceed
threshold
allowed.the
If this
switch is "On"
indicated
by this
parameter,
and
the uplink
transport
UE
will be
from
channel
is transferred
E-DCH,
CELL_FACH
to
PCH.
interactive/ background
service will transfer from
HSPA including HS-DSCH
/E-DCH and HS-DSCH/DCH
to DCH /DCH based on event
1F.
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
Initial Rate of DL DCH
Initial Rate of UL DCH
Max CS Delay
Time Threshold for

CELL_PCH or
URA_PCH to Idle
Switch of
URA_PCH/CELL_PCH
Support
NRT PS Traffic Downlink
Rate Upper Limit When
High Rate C Traffic+ PS
Traffic
NRT PS Traffic Uplink
High Rate C Traffic+ PS
Traffic
NRT PS Traffic Downlink
Low Rate C Traffic+ PS
Traffic
NRT PS Traffic Uplink
Low Rate C Traffic+ PS
Traffic
Downlink Maximum Rate
Threshold of I/B Service
on CELL_FACH(kbps)
Uplink Maximum Rate

Threshold of I/B Service
on RACH

Dynamic Radio
initial rate of DL DCH
RNC and PLMN
Bearer Control
admission.

initial rate of UL DCH
admission.
time of determining the
maximum buffering of the
voice
frames in PDCP
when
This parameter
indicates
the
CS
voice
mapps
on
HStime threshold of UE staying
DSCH/E-DCH.
If data
can
in CELL_PCH or
URA_PCH
not the
be transfered
for
judgment ofin time
when
CS counter
expires, the
transferring
from CELL_PCH
data
will
be
discarded.
or URA_PCH to idle.
This
If theparameter
time of UEindicates
having
whether
stayed intransferring
CELL_PCHtoor
URA_PCH/CELL_PCH
URA_PCH
exceeds
the is the
This
parameter
indicates
supported
or
not.
If
the
value
threshold
indicated
by
this
I/B PS downlink rate upper
is
'Only
Support
URA_PCH',
parameter,
UE will
be are
limit
when
Multi-RABs
allows
UE tofrom
transfer
transferred
CELL_PCH
conversational
(CS
ortoPS) +
URA_PCH
when
there
or URA_PCH to Idle. is no
data
to transmit.
If the
und
PS
and the indicates
rate
ofvalue
thethe
This
parameter
is
'Not
Support',
UE
is
not
conversational
service
is
I/B
PS uplink
rate upper
limit
allowed
to transfer
tothe sum
high, in
which
case,
when
Multi-RABs
are
URA_PCH
whenrates
there isallno
of
the downlink
conversational
(CS orofPS)
+
data
to PS
transmit.
the
I/B
services
cannot
exceed
this
und
PS
and threshold.
the indicates
rate of thethe
This
parameter
Whether
the rate
of theis
conversational
service
I/B
PS downlinkservice
rate upper
conversational
issum
high,when
in which
case, theare
limit
Multi-RABs
considered
as
low of
or all
high
of
the
uplink
rates
theis
conversational
(CS or PS)
determined
according
to "C+
I/B
PS
services
cannot
Traffic
Rate threshold.
Threshold Used
exceed
und
PS this
and the NRT
rate of
for
Determining
PSthethe
Whether
the rate
of the
This
parameter
indicates
conversational
service
is low,
Rate
Limit".
conversational
service
I/B
PSUpper
uplink
upper
in which
case,rate
the
sum isoflimit
the
considered
as low
orthe
high
when
Multi-RABs
are
downlink
rates
of all
I/Bis
determined
to "C+
conversational
(CS or
PS)
PS servicesaccording
cannot
exceed
Traffic
Rate
Threshold
this threshold. WhetherUsed
the
for
PSthe
und
PS
andconversational
the NRT
rate of
rateDetermining
of the
Rate
Upper
Limit".
conversational
serviceas
is low
low,
service
is considered
This
parameter
indicates
the
in
which
case,
the
sum
of
the
or high is determined
downlink
maximum
bit
rate
uplink
rates
the I/B
PS
according
toof
"CallTraffic
Rate
threshold
for
I/B exceed
service this
services
cannot
Threshold
Used
for
being
established
onthe
threshold.
Whether
rate
Determining NRT PS
Rate
CELL_FACH.
When
of
the
conversational
service
Upper Limit".
is considered as low or high
service
is set up
initially, to
if "C
is determined
according
downlink
maximum
bit
rate
is
Traffic
Rate Threshold
Used
This
parameter
indicates
that
lower
than
the
threshold,
for Determining
NRT PS
when
allocate
the if the
Rate
Upper
service
isFACH
setLimit".
upforinitially,
service,
otherwise,
uplink maximum bitallocate
rate is
HS-DSCH/EDCH,
HSlower
than the threshold,
DSCH/DCH
or DCH/DCH
allocate RACH
for the
according
to
UE capability.
service, otherwise,
allocate
HS-DSCH/EDCH, HSDSCH/DCH or DCH/DCH
according to UE capability.
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
HS/D->D/D or HS/E>D/D Based on Quality

Measurement Switch for
S Traffic
Switch of supporting
SRB on E-DCH
Event 4B Counter
Threshold for Cell_Dch
to Cell_FACH
Switch for UL DCH Rate

Adjustment Based on
UE Transmission Power
Wait Timer for Adjusting
Uplink and Downlink
Reconfiguration by One
Step Upward
Switch of Non
Emergency CS Service
Access to CELL_FACH
On RRC
Maximum Bit Rate of
HSDPA Across Iur
Interface
Switch of CS 64kbps
Establishment for
External UTRAN Cell
Maximum Bit Rate on
DL DCH for NRT PS
RAB in External UTRAN
Cell
Maximum Bit Rate on EDCH for NRT PS RAB in
External UTRAN Cell
Maximum Bit Rate on
UL DCH for NRT PS
RAB in External UTRAN
Cell

whether transferring from
This
parameter
indicates
HS-DSCH
to DCH
for
whether
SRB
beared
on on
streaming service based
transport
channel
E-DCH
event 1F is allowed. If thisis
allowed
not.and
When
switch isor
"On"
theminSF
uplink
of
E-DCHchannel
is 2sf2+2sf4,
this
transport
is E-DCH,
For
the UEservice
is
using
parameter
iswhich
useless.For
streaming
will
CELL_DCH,
theis include
SrbOnEdchSwch
"On",
transfer from ifHSPA
measurement
of
the
with
support
of
F-DPCH
from
HS-DSCH /E-DCH and HSoccupied
of
the
uplink
and
cell
and
UE,
signaling
beared
DSCH/DCH to DCH /DCH
downlink
buffers.
on
E-DCH/HS-DSCH,
based
on sending
event 1F.
This
parameter
indicates
the
otherwise beared on DCH/Eevent
4B
counter
threshold
DCH. For SrbOnEdchSwch is
for
CELL_DCH
to
"Off",
on the condition
of cell
CELL_FACH.
For theof
UE
and UE both support
Fusing
if the
DPCHCELL_DCH,
and calculated
E-DCH
times
of the measured
RLC
MinSF=2sf2+2sf4,
signaling
This
parameter
indicates
buffer
payload
of
the
beared on HS-DSCH/E-DCH,
whether
UL
DCH
rate than
downlink
being
else, beared
onsmaller
DCH/E-DCH,
adjustment
based
on UE3.4k.
the
event 4B's
threshold
on
otherwise
on DCH/DCH
transmission
power
is
uplink and the downlink
supported.
this switch is
exceed the Ifthreshold
"Off",
it is by
invalid
for DCH rate
indicated
this parameter,
adjustment
based
on UE
the UE
will be
transferred
This
parameter
indicates
transmission
power;
from CELL_DCH
to
when
uplink or
downlink
otherwise,
valid.
CELL_FACH.
meets
the requirements
for
rate adjustment (upswitching)
This
parameter
indicates
first, the
wait timer
for waiting
whether
non
emergency
the opposite direction CS
service
access to
reconfiguration
by one step.
CELL_FACH on RRC
process. If this switch is "Off",
It means non emergency CS
This
parameter
indicates
service
will not access
to the
maximum
bit rate
of HSFACH/RACH
or HSDSCH
across on
Iur RRC
interface.
DSCH/RACH
This
parameter
used
by
process.
DRNC to adjust code
resource, on the other
This
parameter
aspect,
if servingindicates
cell in
whether
establishing
DRNC, this
parametertraffic
used
CS
64kbps
in External
in flow
control
in Iub interface
UTRAN Cell is allowed or
not. If this switch is "Off", it is
invalid for traffic CS 64kbps
establishment; otherwise,
This
valid.parameter indicates the
maximum bit rate on DL DCH
allowed in External UTRAN
cell for an NRT PS domain
RAB.
maximum bit rate on UL EDCH allowed in External
UTRAN Cell for an NRT PS
domain RAB.
maximum bit rate on UL DCH
allowed in External UTRAN
cell for an NRT PS domain
RAB.
RNC and PLMN
Dynamic Radio
Bearer Control
Dynamic Radio
Bearer Control
RNC and PLMN
/HSUPA
Introduction
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control

Maximum Bit Rate on
DL DCH for RT PS RAB allowed in External UTRAN
in External UTRAN Cell Cell for an RT PS domain
RAB.
Maximum Bit Rate on E- maximum bit rate on UL EDCH for RT PS RAB in DCH allowed in External
External UTRAN Cell
UTRAN Cell for an RT PS
domain RAB.
Maximum Bit Rate on
UL DCH for RT PS RAB allowed in External UTRAN
in External UTRAN Cell Cell for an RT PS domain
This
RAB.parameter indicates
when AMR traffic is being
admitted, if MaxBR is
Switch of AMR Traffic
adopted but fails to be
Re-admission after AMR
admitted due to soft resource
Rate Decrease
limit and the switch is on, the
lowest
assignedindicates
rate will be
This parameter
the
admitted
again.
dowblink Conversational
Downlink Conversational
service maximum size in
Service Maximum MACoctets of the MAC level PDU
d PDU Size Extended
when an extended MAC level
PDU size is required.
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control
RNC
Admission
Control /AMR-NB &
AMR-WB
RNC
HSPA Evolution
RNC
MBMS

whether UEs in CELL_FACH RNC
state will be counted or not.
MBMS

B Traffic on PTP or PTM
whether background service
Switch
is carried by PTP.
Counting Scope for

Cell_FACH
Dynamic Radio
External UTRAN
Bearer Control
Cell and PLMN
/Handover Control

whether UEs in CELL_PCH RNC
state
will be counted
or not.
This parameter
indicates
the
UE number threshold used
for switching between PTP
and PTM. If number of UEs
UE Number Threshold
obtained by counting is larger RNC
for PTP and PTM Switch
than or equals to this
threshold, UEs will be
switched between PTP mode
and
mode.indicates
This PTM
parameter
S Traffic on PTP or PTM
whether streaming service is RNC
Switch
carried by PTP.
Counting Scope for
Cell_PCH
Counting Scope for

URA_PCH

whether UEs in URA_PCH
state will be counted or not.
RNC
MBMS
MBMS
MBMS
MBMS

downlink rate adjustment
levels used by DRBC. The
Downlink Rate
downlink rate adjustment
Adjustment Level
range is limited by this
parameter.
MAX_NUM_RATE_ADJUST
=6.
Downlink Rate
Adjustment Level
number of downlink rate
Number
adjustment levels.
uplink rate adjustment levels
used by DRBC. The uplink
Uplink Rate Adjustment
rate adjustment range is
Level
limited by this parameter.
MAX_NUM_RATE_ADJUST
=6.
Uplink Rate Adjustment
number of uplink rate
Level Number
adjustment levels.
whether the release of PTM
This parameter
indicates or
the
radio
bearer is permitted
Type of Transport
type
of atransport
channelIfand
not
for
MBMS
service.
Channel for Initial RRC
signalling
for initial
RRC
this switchrate
is "Off",
it won't
Connection Setup
connection
setup.
allow
to release indicates
the PTM the
This parameter
radio
bearer,
which
interval of reporting means
signaling
that it only can
adopt PTM for
connection
release
P-T-M RB Release
the
service; if this
switch
indication(with
cause).
AsisUE
Permission
"On",
it
will
allow
to
release
in connection mode in PS
the
PTM aradio
bearer,time
which
domain,
prolonged
means
that
when
the
number
without PS data
UE's Waiting Time of
of
UE which wish
to receive
transmission,
if T323
is not
This
parameter
Sending Message
MBMS
service
isindicates
greater
than
running,
UE
send
signaling
whether
the
fast
Dormancy
"Signaling Connection
UE
number release
threshold used is
connection
Whenbetween
fast dormancy
Release Indication"(with active.
for
switching
PTP
indication(with
cause)
to
switch
is
"On",
RNC
send
cause)(T323)(s)
and
PTM,
then
it
will
choose
switch
states,
and
start
T323
to the
UE service.
by SIB1 andT323.
PTP
for
If
no
data
transmit
before
UTRAN mobility information.
T323
UEinto
still in
Switch of T323
UE
is timeout
capableand
switch
connection
mode,
then
broadcasting
dormancy by
self judgment.
resend
connection
When
itsignaling
is "Off",indicates
RNC
send
This
parameter
the
release
indication(with
message
without
T323,
RNC
time
interval
for
taking
an
cause).
will
release
average
or asignaling
variance, which
Time Interval for Taking connection by evaluating
is only valid when the
an Average or a
traffic
or signaling
connection
This
parameter
indicates
measurement
quantity
is the
Variance
release
command.
event
identity
the traffic
'Average
RLCof
buffer
payload'
volume
measurement
or 'Variance
of RLC buffer
performed
payload'. by UE.
UE Traffic Volume
Where
Measurement Event
MAX_UE_TRV_MEAS_EVE
Identity
NT is the maximum number
of UE traffic volume
measurement event, which
equals
to 2.
Event Number of UE
This parameter
indicates
Traffic Volume
event number of UE traffic
Measurement
volume measurement.
QoS
Guarantee/Dynami
RNC and PLMN
c Radio Bearer
Control
QoS
Guarantee/Dynami
RNC and PLMN
c Radio Bearer
Control
QoS
Guarantee/Dynami
RNC and PLMN
c Radio Bearer
Control
QoS
Guarantee/Dynami
RNC and PLMN
c Radio Bearer
Control
RNC
Dynamic Radio
Bearer Control
Service Related MBMS
RNC
Connection
Management
RNC
Connection
Management
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control

which type of transport
Transport Channel Type channel this set of traffc
volume measurement
parameters
apply
for.
This
parameter
indicates
the
RLC mode of the traffic
This parameter
indicates
the
volume
measurement
report.
measurement
quantity
of
the
If
the
value
is
AM
RLC,
RNC
traffic
volume
measurement
can request UE for
that
UE
performs.
This
parameter
indicates
the
retransmission
after
receiving
pending
time
after
trigger.
This
timer is started
in the
continuous).
If the value
is UE
when
a measurement
report
Measurement Report
UM RLC,
the retransmission
has
triggered
by a
Transfer Mode
is notbeen
required.
Usually,
given
The UE
is then
report event.
the results
of the
forbidden
to send new in
important measurements
measurement
AM mode and reports
those less
triggered
the same
important by
in UM
mode event
(to
Pending Time After
during
this
time
period,
reduce
the
traffic
volume of
Trigger
instead
the UE waits
untiland
the
the measurement
report
timer
expires.
increase
the system
Where
capacity).
MAX_UE_TRV_MEAS_EVE
Amount of Reporting in NT is the maximum number
amount of reporting for
This
indicates
of
UEparameter
traffic
volume
periodic
reporting
mode. the
report
rules of event,
the traffic
measurement
which
volume
measurement.
When
equals to
2.
the value is 'Periodical
This
parameter
indicates
the
Reporting
Criteria',
two sets
reporting
interval
for
periodic
of the measurement
reporting
mode.
parameters
are required to
be configured. One set of the
periodical parameters are
configured to UE and the
Report Criteria
other set of event parameters
are configured to SRNC for
event judgment. When
receiving
the periodical
This parameter
indicates
measurement
reports
from
whether the report
of average
Average of RLC Buffer UE, SRNC judges which
of RLC buffer payload for
Payload for Each RB
event
is triggered
each radio
bear isaccording
requested
to the
or
not.event criteria
parameters, and then
decides
which operation
This parameter
indicates
should be
performed.
RLC Buffer Payload for whether
the
report of RLC
Each RB
bufferr payload for each radio
This
indicates
bear parameter
is requested
or not. the
reporting threshold of event
4A
4B for traffic
volume
Thisand
parameter
indicates
measurement
on non-DCH
whether the report
of
Variance of RLC Buffer channel. If the traffic volume
variance of RLC buffer
Payload for Each RB
becomes
larger
the
payload for
eachthan
radio
bear
threshold
of event
is requested
or not.4A, a
report of 4A event will be
Traffic Volume
triggered; and if the traffic
Threshold of Event
volume becomes smaller
4A/4B for Non-DCH
than the threshold of event
Channel
4B, a report of 4B event will
be triggered.
Where
MAX_UE_TRV_MEAS_EVE
NT is the maximum number
of UE traffic volume
measurement event, which
equals to 2.
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control

4A and 4B for traffic volume
measurement on DCH whose
rate is 8kbps. If the traffic
volume
becomes
larger than
This parameter
indicates
the
the
threshold
of
event
4A, a
report
4Afor
event
willvolume
be
4A andof4B
traffic
triggered; and on
if the
traffic
measurement
DCH
whose
Traffic Volume
volume
becomes
smaller
rate
is
16kbps
If
the
traffic
Threshold of Event
than thebecomes
thresholdlarger
of event
than
4A/4B for DCH of 8 kbps volume
This
parameter
indicates
the
4B,
a
report
of
4B
event
will
the
threshold
of
event
4A,
a
reporting
threshold
of
event
be
triggered.
report
of
4A
event
will
be
4A
and 4B for traffic volume
Where
Traffic Volume
triggered; and on
if the
traffic
measurement
DCH
whose
MAX_UE_TRV_MEAS_EVE
Threshold of Event
volume
becomes
smaller
rate
is
32kbps.
If
the
traffic
NT
isthe
thethreshold
maximumofnumber
4A/4B for DCH of 16
than
event
volume
becomes
larger
than
This
parameter
indicates
the
of
UE
traffic
volume
kbps
4B,
a
report
of
4B
event
will
the
threshold
of
event
4A,
a
reporting
threshold
of
event
measurement
event,
which
be
triggered.
report
of
4A
event
will
be
4A
and to
4B2.for traffic volume
equals
Where
Traffic Volume
triggered; and on
if the
traffic
measurement
DCH
whose
MAX_UE_TRV_MEAS_EVE
Threshold of Event
volume
becomes
smaller
rate
is
64kbps.
If
the
traffic
NT
isthe
thethreshold
maximumofnumber
4A/4B for DCH of 32
than
event
volume
becomes
larger
than
This
parameter
indicates
the
of
UE
traffic
volume
kbps
4B,
a
report
of
4B
event
will
the
threshold
of
event
4A,
a
reporting
threshold
of
event
measurement
event,
which
be
triggered.
report
of
4A
event
will
be
4A
and to
equals
Where
Traffic Volume
triggered; and on
if the
traffic
measurement
DCH
whose
MAX_UE_TRV_MEAS_EVE
Threshold of Event
volume
becomesIfsmaller
rate
is
128kbps.
the
traffic
NT
isthe
thethreshold
maximumofnumber
4A/4B for DCH of 64
than
event
volume
becomes
larger
than
This
parameter
indicates
the
of
UE
traffic
volume
kbps
4B,
a
report
of
4B
event
will
the
threshold
of
event
4A,
a
reporting
threshold
of
event
measurement
event,
which
be
triggered.
report
of
4A
event
will
be
4A
and to
equals
Where
Traffic Volume
triggered; and on
if the
traffic
measurement
DCH
whose
MAX_UE_TRV_MEAS_EVE
Threshold of Event
volume
becomesIfsmaller
rate
is
256kbps.
the
traffic
NT
isthe
thethreshold
maximumofnumber
4A/4B for DCH of 128
than
event
volume
becomes
larger
than
This
parameter
indicates
the
of
UE
traffic
volume
kbps
4B,
a
report
of
4B
event
will
the
threshold
of
event
4A,
a
reporting
threshold
of
event
measurement
event,
which
be
triggered.
report
of
4A
event
will
be
4A
and to
equals
Where
Traffic Volume
triggered;
and on
if indicates
the
traffic
This
parameter
the
measurement
DCH
whose
MAX_UE_TRV_MEAS_EVE
Threshold of Event
volume
becomes
smaller
time
difference
between
rate
is
384kbps.
If
the
traffic
NT
isthe
the
maximum
than
threshold
ofnumber
event
having
detected
the
event
volume
becomes
larger
than
of
UE
traffic
volume
kbps
4B,
a
report
of
4B
event
will
generation
and
reporting
the
the
threshold
of
event
4A,
a
measurement
event,
which
be
triggered.
event.
Only
when
the
event
report
of
4A
event
will
be
equals
to 2.is detected and
Where
generation
Traffic Volume
triggered; and
if the traffic
MAX_UE_TRV_MEAS_EVE
still
meets
all requirements
Threshold of Event
volume
becomes
smaller of
NT
the
maximum
event
triggering
after
Time
thanisthe
threshold
ofnumber
eventto
of
UE
traffic
volume
trigger,
the event
be will
kbps
4B, a report
of 4Bcan
event
measurement
event, which
triggered
and reported.
The
be triggered.
equals
to
2.
larger
the
value
is,
the
stricter
Where
the
judgment is for the event
MAX_UE_TRV_MEAS_EVE
Time to Trigger
to
The number
NTbe
is triggered.
the maximum
This
indicates
parameter
be set
of UEparameter
trafficshould
volume
whether
Tx
interruption
after
according
to
the
actual
This
parameterevent,
indicates
the
measurement
which
trigger
is
configured
or
not.
requirements.
Sometimes,
if
time
of to
prohibiting
transmiting
equals
2.
Where
it
is
set
too
large,
the
quality
data
on
RACH.
Only
when
Tx Interruption After
MAX_UE_TRV_MEAS_EVE
of calls volume
may decrease.
traffice
measurement
Trigger Configuration
NT
is RACH,
the maximum
Where
is
on
can
thisnumber
Tag
of
UE
traffic
volume
MAX_UE_TRV_MEAS_EVE
parameter
be configured and
measurement
event,
which If
NT
is the maximum
number
its configuration
is optional.
equals
to
2.
of
UE
traffic
volume
the transport
channel
to be
This
parameter
indicates
the
measurement
event,
which
Tx Interruption After
measured
is DCH,
this
UE traffic volume
equals
to 2.doesn't
Trigger
parameter
need to be
measurement
configuration
configured.
index which is used to index
Where
different parameter
MAX_UE_TRV_MEAS_EVE
configuration sets for traffic
UE Traffic Volume
NT is themeasurement.
maximum number
volume
There
Measurement
of
trafficdifferent
volume sets of
areUE
several
Configuration Index
measurement
event,
configured values
for which
the
equals
to
2.
same set of parameters
according to specific
measurement purpose,
measurement quantity and
so on.
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
Function of
Configuration
Parameters
Switch of CS 64kbps
Establishment
Maximum Allowable
Rate on DCH to be
Increased to When UE
is in Macro Diversity
Maximum Bit Rate on
DL DCH for NRT PS
RAB in Serving Cell

purpose and functions of the
set of traffic volume
parameters.
This
parameter indicates
whether establishing traffic
CS 64kbps in the cell is
allowed or not. If this switch
is "Off", it is invalid for traffic
CS 64kbps establishment;
otherwise,
valid.indicates the
This parameter
maximum allowable data rate
on DCH to be increased to
when UE is in the macro
diversity.
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
/Handover Control
UTRAN Cell and Dynamic Radio

PLMN
Bearer Control

Dynamic Radio
maximum bit rate on DL DCH UTRAN Cell and
Bearer Control
allowed in serving cell for an PLMN
/Handover Control
NRT PS domain RAB.

Maximum Bit Rate on Emaximum bit rate on UL EDCH for NRT PS RAB in
UTRAN Cell
DCH allowed in serving cell
Serving Cell
for an NRT PS domain RAB.
Maximum Bit Rate on
UL DCH for NRT PS
RAB in Serving Cell
Dynamic Radio
Bearer Control
/Handover Control

Dynamic Radio
maximum bit rate on UL DCH UTRAN Cell and
Bearer Control
allowed in serving cell for an PLMN
/Handover Control
NRT PS domain RAB.

Maximum Bit Rate on
DL DCH for RT PS RAB
UTRAN Cell
allowed in serving cell for an
in Serving Cell
RT PS domain RAB.
Dynamic Radio
Bearer Control
/Handover Control

Maximum Bit Rate on Emaximum bit rate on E-DCH
DCH for RT PS RAB in
UTRAN Cell
Serving Cell
RT PS domain RAB.
Dynamic Radio
Bearer Control
/Handover Control

Maximum Bit Rate on
UL DCH for RT PS RAB
UTRAN Cell
in Serving Cell
RT PS domain RAB.
Dynamic Radio
Bearer Control
/Handover Control
E-FACH DRX Support

Indication in Cell
This Parameter Presents

Whether E-FACH DRX is
Supported in Cell.
Inactivity Time of
E_FACH
Transmission(T321)
Inactivity Time of E-DCH

Transmission, UE Should Go
RNC
Into E-FACH DRX State
when times out.
UTRAN Cell
HSPA Evolution
HSPA Evolution
On the State Of E-FACH

Cycle Length of
DRX, This Parameter
Discontinue Receiving of Indicates Cycle Length of
HS-DSCH
Discontinue Receiving of HSDSCH.
On
the State of E-FACH
DRX, This Parameter
Indicates Several Frames
Length of Receiving
Using for HS-DSCH
Frames in E-FACH DRX This parameter is a switch
Detection
in theIndicates
Cycle
indicating
whether
RRCLength
The Parameter
of Discontinue
Receiving
of
redirection
function
triggered
Whether
DRX
Operation
Can
HS-DSCH.
by
congestion
Be radio
Usedresource
By All E_FACH
is
open.The
If the
switch is off,
Users.
value"0"means
Indication of UE with
when
RRC
Connection
only UL E_FACH UE Could
Enhanced DRX
Request
to be setup
Use Enhanced
DRX,on
And
DCH/DCH
is
rejected
The Value"1"Means All
because
resource
E_FACH of
UEradio
Could
Use
Switch of RRC
congestion,
RRC redirection
Enhanced DRX.
indicates
the
Redirection Triggered by This
is notparameter
performed,
and RRC
increment
of event to
4B0
Radio Resource
connectiontimes
can continue
for
UEbewhich
notthe
sensitive
Congestion
try to
setupison
for
battery consumption
is is
RACH/FACH
;
If
the
switch
Increment Times of
transferred
to
URA_PCH
or
Event 4B0 for UE Which on, when RRC Connection
Idle
state
based
on
the
traffic
Request to be setup on
is not sensitive for
volume
measurement,
DCH/DCH
is rejected
Battery Consumption
relative
toofother
For this
because
radioUEs.
resource
Transferred to
kind
of UE, the
value
of this
congestion,
RRC
Redirection
URA_PCH or Idle state This parameter indicates the
parameter
is larger,
thethe
based on the
value of
different
dynamic
radio
transition
for
the
UE
to
parameter PriRedirectRat
is
DRBC Strategy for
bearer
control
scene,
which
URA_PCH
or
Idle
is
more
allowed.
Channel Resource
is
used to distinguish fast or
difficult.
Utilization
This parameter
indicates
slow
scene for the
dynamic
whether
substitute
3.4kbps
radio bearer
control.
signaling by 6.8 kbps
signaling during RRC
Switch of 6.8kbps
connection setup when
Signaling Using on DCH
signaling is carried on DCH
or when RB has been setup
and signaling is carried on
DPCH
alone. indicates the
UE Internal
This parameter
Measurement Event
UE internal measurement
This
Identity
eventparameter
identity. indicates the
UP Traffic Volume
number for HS-DSCH in
Measurement
CELL_FACH, used for
indexing
a set ofindicates
parameters
This parameter
the
for HS-DSCH in
configured
for
user
plane
CELL_FACH
traffic
volume event
measurement
configuration
UP Traffic Volume
measurement
for HS-DSCH
number for E-DCH
in
Measurement
in CELL_FACH.
CELL_FACH,
used for
for E-DCH in
This
parameter
is relative
configured
for user
plane to
CELL_FACH
the
cellvolume
maximal
transmit
traffic
event
carrier
power and
is used in
to
measurement
for E-DCH
Cell Downlink Load
decide
the
initial
AMR
data
CELL_FACH.
Threshold for AMR Data rate. When the cell effective
Rate Decision
downlink load is larger than
this threshold, the new AMR
will be setup with the
discounting data rate.
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
UTRAN Cell
Connection
Management
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
UTRAN Cell
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Dynamic Radio
Bearer Control
UTRAN Cell
AMR-NB & AMRWB
This parameter is relative to

the cell uplink base noise
and is used to decide the
Cell Uplink Load
Initial AMR data rate. When
Threshold for AMR Data the
effectiveindicates
uplink load
Thiscell
parameter
the
Rate Decision
is
larger
than
this
threshold,
Initial AMR data rate
when
the new
willWhen
be setup
cell
load AMR
is high.
the
with
the discounting
data
cell effective
downlink
load is
Narrow-Band AMR Initial rate.
larger than AmrDlLdThrd or
Data Rate for High Cell the cell effective uplink load
This
parameter
indicates the
Load
is larger
than AmrUlLdThrd,
Initial
AMR
data
rate when
the new Narrow-Band
AMR
cell
load
is high.
will be
setup
withWhen
the the
This
parameter
indicates
the
cell effective
downlink
is
data
rate ofload
Wide-Band AMR Initial discounting
valid
UE
version
for
heart
larger
than
AmrDlLdThrd
or
NAmrInitialRate
Data Rate for High Cell beat. In order to avoid
the cell effective uplink load
Load
UE(before
R8)sending
is larger than
AmrUlLdThrd,
Signaling
ConnectionAMR will
the new Wide-Band
Release
be setup Indication(SCRI)and
with the discounting
This
indicates
release
initiatively.
data parameter
ratesignaling
of WAmrInitialRate
The Target of UE
whether
only
judge
downlink
RNC would operated
heart
Version for Heart Beat
traffic
on
heart
beat
beat check when nofor
data
channel
switching
to UE will
transmission
with CN,
PCH/IDLE.
If it switches
on,
not
send
SCRI
when
receive
The Switch Indicates
means
no bit
need
to consider
data.
The
of
this
whether Only Judge the
the
restriction
ofindicates
uplink
traffic
parameter
indicates
whether
This
parameter
the
Downlink Traffic on
on
heart
beat
for
channel
execute
heart
beat
check
on
period
of
UE
heart
beat.
In
Heart Beat for Channel
switching
to PCH/IDLE.
If
every
UE
version.
order
to
avoid
UE(before
Switching to PCH/IDLE
switch
off, the
downward
R8)sending
Signaling
Chanel
switching
need to
Connection Release
consider the uplink release
Indication(SCRI)and
Heart Beat Period
measurement
reportRNC
signaling initiatively,
restriction
on
heart
beat.
would
operated heart
beat
BCH transmission
power.
check
when
no
data
This parameter is the offset
transmission
with CN, UE will
relative to PCPICH
not send
SCRI
when
receive
This
parameter
indicates
the
transmission
power.
BCH
is
BCH Power(dB)
data.
index
of Limiting
HSDPA
mapped
one to one
to
GBR
Resource
Consumption
PCCPCH
physical
channel.
parameters
based
the
In addition, one
cellon
only
service
type.
Different
contains one PCCPCH/BCH.
Cell Limiting HSDPA
requirements need different
GBR Resource
configurations of the
Consumption Index
parameters.
Andindicates the
The parameter
corresponding
Limiting
initial value of the
total
HSDPA
GBR
Resource
transmission power of HSConsumption
parameters
PDSCH, HS-SCCH,
E- of
HSPA Total Downlink
the
cell
can
be
indexed
by
AGCH, E-RGCH and E-HICH
Power(%)
this
parameter.
codes,
which is indicates
a ratio the
The parameter
relative
to the
maximum
DL
maximum
value
of the total
transmission
power
of
the
transmission power of HScell.
PDSCH, HS-SCCH, EMaximum HSPA Total
AGCH, E-RGCH and E-HICH
Downlink Power(%)
codes, which is a ratio
This
parameter
indicatesDL
the
relative
to the maximum
assumed
HS-PDSCH
transmission
power of power
the
offset
cell. relative to P-CPICH/SHS-PDSCH
CPICH power used for CQI
Measurement Power
measurement. MPO should
Offset(dB)
be configured according to
the actual usage of 64QAM,
MIMO and DC-HSDPA.
UTRAN Cell
AMR-NB & AMRWB
RNC and PLMN
AMR-NB & AMRWB
RNC and PLMN
AMR-NB & AMRWB
RNC
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
RNC
Dynamic Radio
Bearer Control
UTRAN Cell
Power Control
UTRAN Cell
Overload Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
Actual Configuration of
HSDPA Evolution
Function of UE in the
Cell

whether HSDPA evolution
function is used in the
configuration of MPO. Bit0Bit2 indicates 64QAM, MIMO
and DC-HSDPA separately,
other bits are reserved for
future use. MPO should be
configured according to the
UE's
actual usage
64QAM,
Cell Identity
is validofonly
in
MIMO
and
DC-HSDPA.
locates.
minimum value of the total
transmission power of HSPDSCH, HS-SCCH, EAGCH, E-RGCH and E-HICH
codes, which is a ratio
This
parameter
indicatesDL
the
relative
to the maximum
threshold
of non-serving
transmission
power of theEDCH
cell. to total E-DCH power
ratio. Node B controls the
This
parameter
is a load not
non-service
E-DCH
configuration
Index which
exceed this threshlod
through
indicates
a set
of diversity
the HSUPA
scheduling
mode
and service related
mechanism.
power control parameters.
Each cell obtains the
diversity mode and service
related
power control
This
parameter
indicates the
parameters
quality factoraccording
of the ULto the
index
indicated
this which
DPCCH
PILOT by
domain
parameter.
is a constant used for
calculating the UL DPCCH
power offset for a newly
accessed call.
power offset between the DL
DPCH TFCI domain and the
DPCH data domain.
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
UTRAN Cell
Power Control
/HSDPA Packet
Scheduling
UTRAN Cell
Power Control /
Congestion
Control /Admission
Control
UTRAN Cell
Overload Control
/HSUPA Packet
Scheduling
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
DPCH PO2(dB)

DPCH TPC domain and the
DPCH data domain.
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
DPCH PO3(dB)

DPCH PILOT domain and
the DPCH data domain.
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
Cell Identity
Minimum HSPA Total

Downlink Power(%)
Target Non-serving EDCH to Total E-DCH

Power Ratio(%)
Diversity Mode and
Traffic Related Power
Control Parameters
Index
DPCCH Pilot Field

Eb/N0(dB)
DPCH PO1(dB)
E-AGCH Power Offset

for TTI 10ms(dB)
E-AGCH Power Offset

for TTI 2ms(dB)

power offset relative to DL
DPCH pilot domain
configured for E-AGCH in
10ms E-TTI.
DPCH pilot domain
configured for E-AGCH in
2ms E-TTI.
E-HICH Power Offset for

TTI 10ms in Single Link
Condition(dB)
E-HICH Power Offset for

TTI 2ms in Single Link
Condition(dB)
E-RGCH Power Offset

for TTI 10ms in Single
Link Condition(dB)
E-RGCH Power Offset

Link Condition(dB)
DPCH Maximum DL
Power(dB)
Maximum Allowed
Uplink DPCH
Transmission
Power(dBm)
DPCH Minimum DL
Power(dB)
SCCPCH Power for Cell

in Half-island Status(dB)
SCCPCH Power for

Single Cell
Reception(dB)
Transmit Diversity Mode
Uplink Initial SIR

Target(dB)

DPCH pilot domain
configured for E-HICH in
10ms E-TTI and single link
condition.
DPCH pilot domain
configured for E-HICH in 2ms
E-TTI and single link
condition.
DPCH pilot domain
configured for E-RGCH in
10ms E-TTI and single link
condition.
power
offset relative
to DLthe
This
parameter
indicates
DPCH
pilotdownlink
domain DPCH
maximum
configured
forpower.
E-RGCH
in
transmission
When
2ms
E-TTI
and
single
link
performing the downlink inner
condition.
loop power control, the new
transmission power must be
This
parameter
indicates
the
smaller
than or equal
to the
maximum
UL power
configuredallowed
DPCH Maximum
used
to limit
DL Power.
If the
the maximum
newly
transmission
power of the
computed transmission
UE.
When
performing
power
is larger
than
thethethe
This
parameter
indicates
uplink
inner
loop
power
configureddownlink
DPCH Maximum
minimum
DPCH
control,
themake
newly
DL
Power,
itcalculated
equal
to
transmission
power.
When
transmission
power
of
UE
the
configured
DPCH
performing the downlink inner
may
be
over
the
Maximum
Maximum
DL
Power.
loop
power
control,
the new
allowed
UL TX
power,
in such
transmission
power
must
be
case
the
UE
can
only
larger than or equal to the
transmit
with
Maximum
configured
DPCH
Minimum
This
parameter
indicates
the
This
parameter
indicates
the
allowed
UL
TX
power.
DL
Power.
if
the
newly
transmission
power
of
the
SCCPCH power for cell in
computed used
transmission
SCCPCH
forRNC
bearring
half-island
status.
shall
power
smaller
than
thethe
MTCH
information
when
use theis
power
configued
by
configured
DPCH
Minimum
cell
in island
status.
this is
parameter
in
case
that
DL
it equal
to
UE
can
receive
the
same
the Power,
cell is
inmake
half-island
status
the
configured
DPCH
service
from
multiple
which means few
Minimum DL power.
neighbouring
cells
neighbouring
cells are
transmitting
transmitting the
the same
same MBMS
MBMS
services
andgain
benefit
from
service and
of soft
orthe
soft
combining
or selective
selective
combining
is small.
combining, which requires
less SCCPCH transmission
power. But in the case when
This
indicates
noneparameter
of neighbouring
cellsthe
transmit
diversity
mode
used
transmits the same services,
by
of diversity
UEthis
is inset
island
status, mode
and
and
related
power
RNCservice
shall use
the power
This
parameter
indicates
the
control
parameters.
configured
by this
parameter
initial
SIR
target
of
the
uplink
to meet the QoS
physical
channel.
The
target
requirements
of the
MBMS
SIR
is
the
standard
to
service.
perform the uplink inner loop
power control. The value has
effect on the convergence
speed of the power control.
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
/Handover
Control /AMR-NB &
AMR-WB
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
/AMR-NB & AMRWB
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control /
Admission Control
UTRAN Cell,
Service and
Diversity Mode
Related
MBMS
UTRAN Cell,
Service and
Diversity Mode
Related
MBMS
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
Maximum Uplink SIR

Target(dB)
Minimum Uplink SIR

Target(dB)
Guaranteed Bit Rate
Levels of HSDPA
Services for Limiting
HSDPA GBR Resource
Consumption(bps)
Guaranteed Bit Rate
Level Number of HSDPA
Services for Limiting
HSDPA GBR Resource
Consumption
Limiting HSDPA GBR
Resource Consumption
Index
UE HS-DSCH Required
Power Upper Limit for
Limiting HSDPA GBR
Resource
Consumption(dB)
Forced Queue Switch
for AMR Service
Forced Queue Switch

for CS 64kbps service
Maximum Time in the

True Queue when
Service be Forced into
Queue(s)
HS-DPCCH ACK Power
Offset for Single Radio
Link or Intra-NodeB
Handover
ACK-NACK Repetition
Factor

maximum uplink target SIR,
which is used to give the
range for the target SIR of
the outer loop power control.
minimum uplink target SIR,
which is used to give the
range
for the target
SIR ofthe
This parameter
indicates
the outer loop
control.
guaranteed
bitpower
rate levels
of
HSDPA services for limiting
HSDPA GBR resource
consumption. It is used in
resources consumption
This
parameter
indicates
control
of HSDPA
GBR the
guaranteed
services. bit rate level
number
of HSDPA services
MAX_NUM_HS_GBR=33.
This
parameter
indicates
for limiting
HSDPA
GBR the
index
of Limiting
HSDPAIt is
resource
consumption.
This
indicates UE
GBR
Resource
Consumption
usedparameter
in resources
HS-DSCH
required
power
parameters
based
on
consumption control
ofthe
upper
limit
for
limiting
service
type.
Different
HSDPA GBR services.HSDPA
GBR
resourceneed
consumption,
requirements
different
expressed
in
the
configurations of form
the of
power
offset And
of the CPICH
parameters.
power.
When
required
correspondingthe
Limiting
power
UE HSDPA
GBR
HSDPAofGBR
Resource
service
is higher
than this of
Consumption
parameters
threshold,
means
that by
this
the cell canit be
indexed
UE
consuming
too
much
this parameter.
This
parameter
indicates
the
resource,
so it need
to limit
forced
queue
switch forby
AMR
resource
consumption
this
service.
In the condition
that
UE.UE HS-DSCH
required
there
no queue
information
powerisupper
limit for
limiting
This
indicateshas
the
or
theparameter
RAB
beresource
assigned
HSDPA
GBR
forced
queue
switch
for
CS
no
queue ability
in the AMRto
consumption
corresponds
64kbps
service. Ininformation,
the
RAB
assignment
HsGBRLev[MAX_NUM_HS_
condition
that
there
is no is
ifGBR]
the forced
queue
switch
one by one, and
queue
information
or
the the
"On",
then
this
AMR
RA
This
parameter
indicates
MAX_NUM_HS_GBR=33.
RAB
be assigned
hastrue
no
maximum
time in the
queue
ability
in
the
CS
queue when service be
64kbps
service
RAB
forced into
queue.
In the
assignment
information,
condition that there is noif the
forced
queue switch
"On",
queue information
oristhe
then this
CS 64kbps
RAB
be assigned
hasservice
no
has
theability
queueinability.
queue
the RAB
assignment information, if the
forced
queue switch
is"On",
This parameter
indicates
the
then
this
RAB
has
the
queue
power offset of HS-DPCCH
ability,domain
and this
parameter
ACK
relative
to is
the
maximum
in the
DPCCH
when time
UE has
a true
queue.
single link or is in the intraNodeB handover.
ACK-NACK repetition factor,
indicating the number of
consecutive repetitions of the
ACK and NACK.
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
/Handover Control
UTRAN Cell,
Service and
Diversity Mode
Related
Power Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
RNC
Congestion Control
RNC
Congestion Control
RNC
Congestion Control
RNC
Power Control
RNC
Power Control
CQI Feedback
Cycle(ms)
HS-DPCCH CQI Power

Offset for Single Radio
Link or Intra-NodeB
Handover
CQI Repetition Factor
E-DCH Reference
Power Offset
Quantified EDPCCH/DPCCH Power

Offset (10ms TTI)
Quantified EDPCCH/DPCCH Power

Offset (2ms TTI)
HSPA Total Downlink

Power Allocation Method
Switch for Limiting

HSDPA GBR Resource
Consumption
HS-DPCCH ACK Power

Offset for Inter-NodeB
Handover
HS-DPCCH CQI Power

Handover
HS-DPCCH NACK
Power Offset for InterNodeB Handover

CQI feedback cycle, to
determine the time to send
CQI. When the value is 0, the
UE does not feed back the
channel
quality. indicates the
This parameter
CQI domain relative to
DPCCH when UE has a
CQI repetition factor,
indicating the number of
consecutive repetitions of the
CQI.
This
This parameter
parameter indicates
indicates the
the
E-DCH
reference
allocation method power
for HSoffset,
is used to Total
PDSCHwhich
and HS-SCCH
estimate
the
E-DPDCH
Power(when HSUPA is not
power
from or
E-TFCI
without
supported)
HS-PDSCH,
decoding
MAC-e
PDUs
HS-SCCH,
E-AGCH,
E- the
This parameter
indicates
RGCH
and
E-HICH
Total
quantified E-DPCCH/DPCCH
Power
(whenconfigured
HSUPA is to
power offset
supported),
which
is called
10ms E-DCH transmission
HSPA
Total
Downlink
Power
time interval.
for convenience. There are
This
threeparameter
methods: indicates the
quantified
E-DPCCH/DPCCH
1. RNC Static
Assigning
power
offset
configuredthe
to
Mode: RNC configures
2ms
E-DCH
transmission
HSPA Total Downlink Power
time
interval.
to
Node
B and the value is
fixed, which is set based on
the the satistic throughput,
estimated codes number and
power which are needed.
2. RNC
DynamicisAssigning
This
parameter
a switch
Mode:
RNC
configures
indicating
whether
it is HSPA
Total
Downlink
Power
to
supported or not for Limiting
Node
B
and
uses
the
value
HSDPA GBR Resource
of
HSPA Total when
Downlink
Consumption
HSDPA
Powerusers
configured
OMCR
GBR
in bad in
radio
as
initial value and
conditions.
This
parameter
indicates
the
dynamically
adjust
the HSPA
power
offset
of
HS-DPCCH
Total Downlink Power based
ACK
domain
relative
to
on such
factors
as power
DPCCH
when
UE
is
in
interbalance, power congestion
Node
B
handover.
and overload
This
parameter
indicates
the
3.
NodeB
Assigning
Mode:
power
offset
ofconfigure
HS-DPCCH
RNC does
not
CQI
domain
relative toPower
HSPA
Total Downlink
DPCCH
UE isBin interto Node, when
and Node
NodeB
handover.
allocates
the power freely.
NACK domain relative to
DPCCH when UE is in interNode B handover.
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power
Control/Congestion
Control/HSDPA
Packet
Scheduling/Adimiss
ion Control
RNC
Overload Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
HS-DPCCH NACK
Power Offset for Single
Radio Link or IntraNodeB Handover
Power Offset for
Scheduling Info (10ms
TTI)
Power Offset for

TTI)
TPC Command Error

Rate Target
Algorithm of Load
Decreasing

This
parameter
indicates
DPCCH
when UE
has a the
power
offset
single link
or for
is inscheduling
the intrainformation
configured to
NodeB handover.
10ms E-TTI. When no MACd
PDUs are included in the
same
MACe PDU,
UE willthe
This parameter
indicates
use
power
offset
for
power offset for scheduling
scheduling information
as
information
configured to
HARQ
power
offsetnotoMACd
2ms E-TTI.
When
compute
transmission
PDUs arethe
included
in the
power
of
E-DPDCH.
same MACe PDU, UE will
use power offset for
scheduling information as
HARQ power offset to
This
parameter
indicates the
compute
the transmission
target
TPC command
power for
of E-DPDCH.
error rate, used for adjusting
SIR target of F-DPCH.
algorithm of load decreasing
during common overload for
HSDPA cell. HS load
decreasing and R99 load
decreasing can be selected.

locates.
This parameter is a switch
which indicates whether it is
Maximum FACH Power
supported for adjusting
Adjustment Switch for
maximum FACH power when
MBMS Downlink Load
This
parameter
the cell
is in the indicates
downlink the
Control
threshold
for
releasing
overload state. This from
downlink
The
parameteroverload.
is used in
MBMS.
system recovers from the
Threshold for Releasing
overload status if the
from Downlink
downlink load decreases
Overload(%)
below the threshold. And the
measures
of decreasing
the
This parameter
is a switch
downlink
load
should
be
which indicates whether
Downlink Switch for
stopped. data rate is
decreasing
Shielding Rate
supported or not for when the
Reduction
cell is in the downlink
overload
state. indicates the
This parameter
maximum number of DRBC
Maximum Number of
steps of decreasing data rate
Degraded Downlink
for the selected service each
Load Steps Every Time
time when downlink overload
happens.
Downlink Switch for
forcing drop is supported or
Shielding Forced Drop
not for when the cell is in the
downlink overload state.
Cell Identity
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
UTRAN Cell
Overload Control
UTRAN Cell
Parameter
UTRAN Cell
MBMS
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
/Congestion Control
UTRAN Cell
Overload Control

Downlink Switch for
forcing handover is
Shielding Forced
supported or not for when the
Handover
cell is in the downlink
overload
state. indicates the
This parameter
maximum number of
Maximum Number of
selected UEs which are
Downlink Forced Drop
forced to be dropped each
Users Every Time
time when downlink overload
happens.
Maximum Number of
maximum number of
Downlink Forced
selected UEs forced to be
Handover Users or
handed over or radio links to
Deleted Radio Links
This
parameter
the
be deleted
eachindicates
time when
Every Time
threshold
of the downlink
downlink overload
happens.
common overload. The
system is in the overload
Downlink Common
status if the downlink load
Overload Threshold(%) This parameter indicates the
exceeds this threshold and
threshold
downlink
measuresof
ofthe
overload
should
serious
The the
system
be takenoverload.
to decrease
is
in the serious
overload
downlink
load immediately.
Downlink Serious
status if the download TCP
Overload Threshold(%) exceeds this threshold and
measures of serious overload
should be taken to decrease
This
parameter
is a switch
the downlink
load
The Switch of Forced
which
indicates
immediately. whether a
Handover for Online
congested user can trigger
Users in Congestion
forced handover of the online
users in the cell.
which indicates whether a
RAB Release for Online congested user can trigger
Users in Congestion
forced RAB release of the
online users in the cell.
which indicates whether a
This
parameter
the
RAB to FACH of the
congested
user indicates
can trigger
common
overload
threshold
online I/B users in
forced RAB
transferring
to
of
the HS-DSCH.
The
Congestion
FACH
of the online
I/Bsystem
users
is
overload status
in in
thethe
cell.
when the sum of HS-DSCH
Common Overload
Required Power and the
Threshold for HStransmitted carrier power of
This
parameter
indicates
DSCH(%)
all codes
not used
for HS-the
threshold
for releasing
PDSCH, HS-SCCH,
E- from
HS-DSCH
overload.
The
AGCH, E-RGCH
or E-HICH
system
recovers
from and
the HS
is
over
this
threshold,
overload
status
if the
measures
should
be
taken
to
from HS-DSCH
downlink
load
decreases
decrease
the
load.
Overload(%)
below the threshold and.
measures of decreasing the
This
parameter
indicates
HS overload
should
be the
Maximum Number of UE maximum
number
of
services
stopped.
Decreasing Rate When whose rates will be
Congestion
decreased each time when
congestion takes place.
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
parameter for
future use
UTRAN Cell
parameter for
future use
UTRAN Cell
parameter for
future use
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Congestion
Control /Overload
Control
Maximum Users of
Interactive
Class/Background Class
RAB->FACH for
Overload
Safe Threshold for
NodeB(%)
Switch of Interactive
Class/Background Class
RAB->FACH for
Overload
from Uplink
Overload(dB)
Uplink Switch for

Shielding Rate
Reduction
Maximum Number of
Degraded Uplink Load
Steps Every Time
Uplink Switch for

Uplink Switch for

Shielding Forced
Handover
Maximum Number of
Uplink Forced Drop
Users Every Time
Maximum Number of
Uplink Forced Handover
Users Every Time
Uplink Common
Overload Threshold(dB)

maximum users of interactive
or background RABs to be
transferred to FACH from
This
DCHparameter
or HSDPAindicates
when thethe
cell
safe
threshold
of transmitted
is in the
overload
state.
carrier power for Node B to
use. When Node B
schedules HSDPA data
according to scheduling
algorithm
the transmitted
This
parameter
is a switch
carrier
power can
not exceed
which indicates
whether
it is
this
threshold.
open or closed for interactive
transferred to FACH from
This
DCHparameter
or HSDPAindicates
when thethe
cell
threshold
for releasing
is in the overload
state.form
uplink overload. A cell leaves
overload state when its
RTWP reported by Node B is
lower than the threshold
indicated by this parameter
This
is a switch
for a parameter
period of time.
indicating whether
decreasing rate is supported
or notwhen the cell is in the
uplink overload state.
maximum number of DRBC
steps of decreasing data rate
for the selected service each
time when uplink overload
happens.
indicating whether dropping
call is supported or not when
the cell is in the uplink
overload state.
indicating whether forcing
handover is supported or not
when the cell is in the uplink
overload state.
maximum number of
forced to be dropped each
time when uplink overload
happens.
maximum number of
forced to be handed over
This
eachparameter
time whenindicates
uplink the
threshold
of the uplink
overload happens.
common overload.The
system is in the overload
status if the uplink RTWP
exceeds this threshold, and
measures of overload will be
taken to decrease the load
immediately.
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
/Admission
Control /Congestion
Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control
UTRAN Cell
Overload Control

threshold of the uplink
serious overload. The system
is in the serious overload
Uplink Serious Overload This parameter indicates the
status
if theofuplink
RTWP
upper limit
the downlink
Threshold(dB)
exceeds
this
threshold,
and
high load, used in the R99
measures
serious
overload
CS
AMR BLER
target
auto
will
be
takenfunction.
to decrease
the
This
parameter
indicates
adjustment
When
Downlink High Load
load
immediately.
upper
limit
of
the
uplink
high
the switch for BLER auto
Threshold for R99 CS
load,
used infunction
the R99is CS
adjustment
"On",
AMR Services BLER
AMR
services
target
the system is inBLER
the high
load
Target Adjustment(%)
auto
function.
statusadjustment
if the downlink
load
When
thethis
switch
for R99and
CS
exceeds
threshold,
Uplink High Load
AMR
BLERservices
target forBLER
high target
status
auto
adjustment
function is
of R99
CS AMR services
AMR Services BLER
"On",
the
system
in the
should be send toisUE.
Target Adjustment(dB)
uplink high load status if the
uplink effective load exceeds
this
R99 CS
Thisthreshold,
parameterand
indicates
the
Downlink Switch for
AMR services
should
do
switch
of dropping
MBMS
Dropping MBMS
OLPC
the OLPC
servicewith
in MBMS
overload
Services
parameters
for high
load the
This
parameter
indicates
controll.
status. of SCCPCH used to
power
bear MTCH information when
SCCPCH Power Offset receiving in the selective
for Selective
combining mode. This
Combining(dB)
parameter
is theindicates
offset the
This parameter
relatedoftoSCCPCH
the SCCPCH
power
used to
Power
for Single
Cell when
bear MTCH
information
Reception.
This
parameter
indicates the
receiving
in the soft
SCCPCH Power Offset threshold to judge if the local
combining mode. This
for Soft Combining(dB) cell is in half-island status.
parameter is the offset
When
number
of
relativethe
to the
SCCPCH
neighbouring
cellsCell
Power for Single
transmitting
Reception. the same MBMS
This
parameter
indicates
the
Threshold for Cell in
service
is less than
or equals
threshold
to judge
if the
cell
Half-island Status
to this threshold
and
larger
is
in island
status. When
thein
than
the Threshold
for Cell
number
of neighbouring
Island Status,
this MBMScells
cell
that
the same
is in transmiting
half-island status.
The
MBMS
service
judgment
resultisofsmaller
the status
Threshold for Cell in
than
or equals
to thethe
is
used
to
configure
Island Status
Threshold
Cell in Island
appropriatefor
power.
Status, this MBMS cell is in
island
status. The
judgment
This parameter
indicates
the
result
of
the
status
to
transmission powerisofused
MICH,
configure
the
appropriate
MICH Power(dB)
which
is the offset
relativethe
to
This
parameter
indicates
power.
the
PCPICH
transmission
balancing type of the DL
power.
power, which can take the
value of None, Common or
Individual. None indicates
Adjustment Type for DL
there is no need to balance
Power Balance
the DL power. Common
indicates to balance the DL
power and the balanced
This
indicates
radioparameter
links use the
same the
AICH
transmission power,
power.
AICH Power(dB)
which is an offset relative to
the Primary CPICH power.
UTRAN Cell
Overload Control
UTRAN Cell
power control
UTRAN Cell
power control
RNC
MBMS
RNC
MBMS
RNC
MBMS
RNC
MBMS
RNC
MBMS
UTRAN Cell
MBMS /Connection
Management
Node B
Power Control
UTRAN Cell
Node B
Management,
Power Control,
Connection
Management
Shield Period for

Increasing SIR Target in
Threshold
Algorithm(Frames)
DPCH PC Preamble
Length(Frames)
PICH Power(dB)
SRB Delay(Frames)
Power Offset for

Downlink DPCH Initial
Power Calculation when
RAB Hard Handover(dB)
Power Offset for
RAB ReEstablishment(dB)
Power Offset for
Call Setup(dB)
Power Offset for
Soft or Softer
Handover(dB)
Power Offset for
SRB Hard Handover(dB)
PCH Power(dB)
P-CPICH Power(dBm)

shield period used in uplink
outer loop power control
algorithm. For the threshold
algorithm, after uplink SIR
target is increased, because
This
the
of theparameter
existenceindicates
of round-trip
DPCH
power
time, the
effectcontrol
of the
preamble
Forbeuplink
adjustmentlength.
can not
shown
DPCH,
before apower
periodcontrol
of time. So a
preamble
should
be that is to
shield period
is set,
transmitted
before
DPDCH
say during this shield
period,
transmission.
When
power
the received error
transport
control
preamble
being
blocks will
not be is
handled.
transmitted, inner power
control is in effect so as to
This
parameter
indicatesofthe
ensure
the requirement
PICH
transmission
power,
DPDCH
transmission
power
which
is
an
offset
relative
to
to be satisfied.
the
Primary
CPICH
power.
SRB delay. When DPDCH is
being transmitted, UE shall
not send any data on
signalling radio bearers RB0
to RB4 during the number of
frames indicated by this
This
parameter indicates
parameter.
power offset for downlink
DPCH initial power
calculation when RAB hard
handover.
DPCH initial power
calculation when RAB reestablishment.
DPCH initial power
calculation when RAB or
SRB setup.
DPCH initial power
calculation when soft or
This
softerparameter
handover.indicates
DPCH initial power
calculation when SRB hard
handover. This parameter
also is used to calculate FDPCH
initial power
when the
FThis parameter
indicates
DPCH
hard
handover.
transmission power of the
PCH mapped on the
SCCPCH, which is a power
offset relative to the PCPICH
power.
transmission power level of
the Primary CPICH
(Common Pilot Channel),
which is an absolute value.
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Node B
Management,
Power Control,
Connection
Management
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
/Node B
Management
UTRAN Cell
Power Control
PRACH Initiation Tx
Power Constant
Value(dB)

correction value when
calculating the initial
transmission power of
PRACH preamble.
Maximum Allowed UL
TX Power of
RACH(dBm)

maximum allowed UL
UTRAN Cell
transmission power of RACH.
Primary SCH Power(dB)
E-DCH Uplink Nominal

Bit Rate
HS-DSCH Downlink
Nominal Bit Rate
Power Offset of the

Maximum Downlink
DPCH Showing Different
Basic Priority
Power Offset of the
Maximum Uplink DPCH
Showing Different Basic
Priority
Dynamic Update PO2

Switch
R99 CS AMR Services

BLER Target Adjustment
Switch
Maximum FACH
Power(dB)
S-CCPCH TFCI Field

Power Offset(dB)

nominal
bit rate for power.
PSCH transmission
services
E-DCH.power.
It is
relative toonPCPICH
mapped from the Basic
Priority,
higher basic
priority
This parameter
indicates
the
traffic has
nominal bit
nominal
bithigher
rate for
rate.
In the process of NodeB
HSUPA
scheduling,
servicesquick
on HS-DSCH.
It is
EdchNormBitRate
is used as
mapped from the Basic
minmum
guarantee
rate.
Priority, higher
basicbit
priority
Where
MAX_BP
is
the
traffic has higher nominal bit
maximum
rate.
In thenumber
processofofthe
NodeB
Basic
Priority,
which equals
HSDPA
quick scheduling,
to
16.
HsNormBitRate
is used asthe
minmum
guarantee
bitthe
rate.
power offset between
Where
MAX_BP
is
the
DPCH maximum downlink
maximum
number
the of
power
for the
trafficofclass
Basic
Priority,
equals
different
basic which
priority.
So
to
16.
that
users
of
different
basic
priority
may have
different
power offset
between
the
maximum
downlink
power.
DPCH maximum uplink
power for the traffic class of
different basic priority. So
that users
of different
basic
This
parameter
is a switch
This
parameter
indicates
priority
may
have
different
indicating
whether
it is
whether
PO2
betarget
maximum
uplink
power.
supported
for can
BLER
dynamically
updated
or not.
auto adjustment for R99
CS
PO2
is
the
power
offset
AMR services. When this
between
the DLit DPCH
switch is "On",
need toTPC
domain
and the DPCH
data
choose different
uplink OLPC
domain.
parameters or downlink
BLER target parameter for
R99 CS AMR services
according to the uplink and
downlink
load status
This parameter
indicates the
respectively,
in this way, it
maximum transmission
realize
auto
BLER
power of
theadjust
FACHthe
which
is
target
of
the
R99
CS
AMR
mapped on the SCCPCH.
services.
When is
this
is
This parameter
theswitch
relative
"Off", the
BLER
target
of the
value
based
on the
PCPICH
R99
CS AMRpower.
services would
transmission
not be changed.
power offset of the SCCPCH
TFCI domain to the data.
UTRAN Cell
Power Control / Idle

Mode and Common
Channel Behavior
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Power Control
RNC
HSUPA Introduction
RNC
HSUPA Introduction
RNC
HSUPA Introduction
RNC
HSUPA Introduction
RNC and PLMN Power Control
RNC
Power Control
UTRAN Cell
Power Control
/Node B
Management
UTRAN Cell
Power Control
/Node B
Management
S-CCPCH Pilot Field

Power Offset(dB)
S-CPICH Power
Secondary SCH
Power(dB)
Threshold of HARQ
Failure Indication
Threshold of HARQ
Failure Indication
R99 CS AMR Services
Tolerance BLER Period
in High Load Status for
BLER Target
Adjustment(TBs)
R99 CS AMR Services
BLER Target in High
Load Status for BLER
Target Adjustment
Threshold of Sample
Target Downward (2ms
E-TTI)
R99 CS AMR Services
Number Threshold in
High Load Status for
BLER Target
Adjustment(TBs)
SIR Target Downward
(2ms E-TTI)

SIR Target Upward (2ms
E-TTI)

power offset of the SCCPCH UTRAN Cell
pilot domain to the data.
SCPICH transmission power.
This
parameter
indicates the
relative
to the PCPICH
threshold
of
HARQ
failure
power.
indication number to increase
SIR target when ESSCH
transmission
power.
TTI=10ms.
If the times
of
This
parameter
is
the
HARQ failure exceedsoffset
the
relative
to within
PCPICH
This
parameter
indicates
threshold
the power.
time the
threshold
of HARQ
failure
window, RNC
shall increase
indication
number
increase
the SIR target.
It istoonly
This
parameter
indicates
SIR
target
when
E-TTI=2ms.
This
parameter
indicates
applicable
for the
servicesthe
AMR
tolerance
If
the services
times
of HARQ
transport
BLER
carried
onchannel
E-DCH.
Wefailure
get
BLER
period
in
high
load
exceeds
the
threshold
within
quality
target
for
R99
CS
this parameter according
to
status
for
R99
CSRNC
AMR
the
time
window,
shall
AMR
services
when
cell
is as
in
E-DCH
user
number
level
BLER
target
adjustment.
increase
the
SIRfor
target.
is
high
load
status
R99 ItCS
following:
When
the
switch
BLER
only
applicable
forforthe
AMR
BLER
target
E-DCH
user
number
low
auto
adjustment
function
is
services
carried
on
E-DCH.
adjustment.
When
switch
level E-DCH
user the
number
"On",
if
the
cell
is
in
uplink
We
get
this
parameter
for
BLERlevel
targetE-DCH
auto user
medium
high
loadhigh
status,
this
according
tofunction
E-DCH
user
adjustment
"On", if
number
leveluseis
parameter
the
OLPC
number
as following:
the
cell islevel
inindownlink
high
ThrHarqFailTti10[0]
function
as following:
when
E-DCH
user
number
load
status,
the
BLERlow
target
ThrHarqFailTti10[1]
the
tolerance
period
is
not
level
E-DCH
user
number
of
downlink
R99
CS
AMR
ThrHarqFailTti10[2]
This
parameter
indicates
the
over,
and
the
number
of
error
medium
level
E-DCH
user
services
send
to UE number
is get
threshold
of
sample
block
is exceed
the error
number
high
level
from
this
parameter.
to
decrease
SIR
targetadjust
when
block
threshold,
then
ThrHarqFailTti2[0]
Signal
value
is
E-TTI=2ms.
The
SIR
target
the
SIR target upward;
when
ThrHarqFailTti2[1]
Log10(Transport
channel
can
not be decreased
unless
the
tolerance
period
is
ThrHarqFailTti2[2]
BLER
quality
target),noi.e.
the
sample
number
less
arrived,
and
thePnumber
of
physical
value
in TS
than
the
threshold.
When
error
block
is
smaller
than
25.331
is Log10(actualor
HARQ
retransmission
error
block
threshold,
thenR99
value);
the
scalar
value
in
This
parameter
indicates
failure
is
recorded
once D
then
adjust
the
SIR
target
TS
25.331
is
P*10;
value
CS
AMR services
errorAnd if
a
sample
is
obtained.
downward,
else
do nothing.
configured
in
database=
transport
block
number
find
no
HARQ
This
parameter
is
only
valid
D+63;
actual
value
threshold
when
cell
in high
retransmission,
it also
is a
for
uplink
R99
CS
AMR
configured
load
status
for
CS AMR
sample.
Wethrough
getR99
thismanThis
parameter
indicates
the
services.
machine
interface
in
the
services
adjustment.
When
parameter
according
to Enumber of HARQ
background=10^P,
listed
in
the
switch
for BLER
autoas
DCH
user number
level
retransmission
(NHR)
exponential
form,
see
the
adjustment
is SIR
"On", if
following: tofunction
threshold
decrease
table
inwhen
value
range.
the
cell
is
in E-TTI=2ms.
uplink
high
E-DCH
user
number
lowload
target
status,
useNHR
this
parameter
in
level
E-DCH
user
number
When
the
is less
than
This
parameter
indicates
the
Method
of
calculation:
the
OLPC
function
as
medium
level
E-DCH
user
the
threshold,
RNC
shall
number
of
HARQ
BLEREVAL=1:
63;
following:
when
thetarget.
number
number
high
level
decrease
the
SIR
It is
retransmission
(NHR) the
BLER=10.^((BLEREVALof
error
blocks exceeds
DwThrSampNumTti2[0]
only
applicable
for theSIR
threshold
to
increase
63)/10);
threshold
within a
DwThrSampNumTti2[1]
services
carried
onperiod,
E-DCH.
target
when
E-TTI=2ms.
S=[BLEREVAL;
BLER]'
RNC
shall
increase
the SIR
DwThrSampNumTti2[2]
We
get
this
parameter
When
the NHR exceeds
the
target
immediately.
This
according
to
E-DCH
user
threshold,
RNC
shall
parameter
is only
valid for
number
level
as following:
increase
theCS
SIR
target.
It is
uplink
R99
AMR
services.
E-DCH
user number
only applicable
for thelow
level E-DCH
user
services
carried
on number
E-DCH.
medium
level
E-DCH user
We get this
parameter
number
high
level user
according
to E-DCH
NhrThrDownTti2[0]
number level as following:
NhrThrDownTti2[1]
E-DCH user number low
NhrThrDownTti2[2]
medium level E-DCH user
number high level
NhrThrUpTti2[0]
NhrThrUpTti2[1]
NhrThrUpTti2[2]
Power Control
/Node B
Management
UTRAN Cell
Power Control
/Node B
Management
UTRAN Cell
Power Control
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
UTRAN Cell and

Power Control
Service Related
Threshold of Sample
Switch off Frequency

Intelligently Function
Diversity Mode and

Traffic Related Power
Control Parameters
Index
End Time to Switch Off
Frequency
Intelligently(h: min: sec)
Forbidden Time of
Switching Off After
Switching On the
Frequency
Trigger Time of
Judgment Based on UE
Number During
Switching Off Frequency
Intelligently(s)
Switch of Algorithm
Used to Switch On the
Frequency Intelligently
SIB7 Originator
Start Time to Close

Frequency
Intelligently(h: min: sec)
Traffic PC Index
UE Number Threshold
Used for Switching Off
E-TTI=2ms. The SIR target

can not be increased unless
the sample number no less
than the threshold. When
HARQ retransmission or
failure is recorded once then
a sample is obtained. And if
find no HARQ
retransmission, it also is a
sample. We get this
parameter according to EDCH user number level as
following:
This
parameter
indicates
E-DCH
user number
low
whether
switching
the cell
level
E-DCH
user
number
This parameter is aoff
smartly
is
supported.
medium
level
E-DCH
user
configuration Index which
number high
level
indicates
a set
of diversity
UpThrSampNumTti2[0]
mode
and service related
UpThrSampNumTti2[1]
power
control parameters.
This
parameter
is the
an array
UpThrSampNumTti2[2]
Each
cell obtains
with
three
elements
of hour,
diversity mode and service
minute
and
second,
related power controlwhich
indicates
theaccording
end time to
of the
the
parameters
switching
off frequency
index indicated
by this
period.
From thisindicates
time, RNC
parameter.
This
parameter
the
must
stop
to
judge
whether
time interval for switching
offto
switch
off
the
frequency.
This
the frequency again after
end
time isonusually
in the
switching
it. If RNC
morning,
because
the
switches on a frequency, it
number
of UEsoff
in the
service will
can
not
switch
This
parameter
indicates
the
increase
usually
at timer
that time.
frequency
until
the
trigger time of judgment
indicated
parameter
based on by
UEthis
number
during
elaspses.In
this
way,
RNCon
switching off or switching
can
avoid switching
on When
and
frequency
intelligently.
switching
off a frequency
the
UE number
in the cell is
frequently.
This
parameter
indicates
the
less or
more than
the
algorithm
to switch
on is
threshold used
and the
condition
the
frequency
satisfied
duringintelligently.
the time 0:
based
on
the
time
to switch
period of FreClsOpnTrigTm,
on
frequency;
1:
based
it will switch off or switchon
on
whether
the cell. the working cell is
congestion to switch on
frequency; 2: based on time
or whether the working cell is
congestion
to switch on
This
parameter
This
parameter indicates
is an array
frequency.
SIB7
originator
is RNC
or
with three
elements
of hour,
NodeB.
minute and second, which
indicates the start time of the
switching off frequency
period. From this time, RNC
start to judge whether the cell
fulfills
the condition
This parameter
is a of
switching
off the
frequency.
configuration
Index
which
This
start
time
is
indicates a set of usually
servicein
the
nightpower
because
the
related
control
number
of
UEs
in
service
is
parameters. Each cell
usually
small
at
that
time.
obtains
the service
relatedthe
This parameter
indicates
power
control
parameters
UE number
threshold
of
according
to the
index
switching off
frequency
indicated
bywhen
this parameter.
intelligently
multi-carrier
is used. When the number of
the UE in the cell is less then
this threshold, RNC begins to
judge whether to switch off
the cell.
UTRAN Cell and

Power Control
Service Related
UTRAN Cell
Node B
Management
UTRAN Cell
Power Control
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
power Control
UTRAN Cell
Node B
Management
UTRAN Cell
Power Control
UTRAN Cell
Node B
Management
Maximum Number of
Users with Traffic on
Common E-DCH in
Enhancecd Uplink
CELL_FACH State

maximum number of users
with traffic on common EUTRAN Cell
DCH in enhanced uplink
CELL_FACH state in the cell.
Uplink Enhanced
CELL_FACH Support
Indicator
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution

whether the uplink Enhanced
CELL_FACH is open.
additional
E-DCH
This parameter
indicates
UL Interference for
transmission
back
whether the IE
"ULoff in
Common E-DCH
uplink
enhanced
interference
for common EConfigured in SIB5/5bis CELL_FACH state.
DCH" is configured in
Indicator
DPCCH/E-DPCCH/ESIB5/5bis.
This
parameter
indicates
DPDCH
transmission
is the
Power Offset between
power
offset
between
the last
the Last Preamble and started with sending the PHYtransmitted
preamble
and
DATA-REQ primitive everythe
the Initial Power of the
initial
power ofTime
the DPCCH
Transmission
Interval.
DPCCH in Enhanced
transmission
in
the primitive
The PHY-Data-REQ
Uplink CELL_FACH
Enhanced
Uplink inSDUs
is
used to request
Sate
CELL_FACH
state.
used for communications
Additional E-DCH
passed to the physical layer.
Transmission Back Off Hereby, if TTI length is 10
for Common E-DCH
ms,
for the indicates
first (1 + the
Thisthen
parameter
"Additional
E-DCH
common E-DCH
transmission
back
off")
transmission
continuation
This
parameter
indicates
the
Transmission
Time
Intervals
back
off.ofUE
will implicitly
Common E-DCH
number
common
E-DCH
no
SDU
is
passed
to
the
release
theincommon
E-DCH
Resources Number
resources
uplink
enhanced
physical
layer,
i.e.
only
resources
after
an
empty
This
parameter
indicates
the
CELL_FACH
state.
DPCCH
transmission
takes
buffer status
has been
maximum
common
E-DCH
place.
If
TTI
length
is
2
ms,
reported as
SI to thetime,
Node
resource
allocation
UEB,
for the
first
+
Maximum Common E- then
and
after
the
last(2HARQ
will
implicit
release
the
"Additional
E-DCH
DCH Resource
process
has
beenresources
common
E-DCH
transmission
back
off")
Allocation Time for
acknowledged
or maximum
when
the maximum
common
Transmission
Time
Intervals
CCCH
number
of retransmission
E-DCH
resource
allocation
no
isreached;
passed to
the
hasSDU
been
The
time
for CCCH
transmission
physical
layer.
empty
buffer
status report is
has
been
reached.
E-DCH Transmission
transmitted
if buffer
remains
This parameter
indicates
the
Continuation Back Off
empty
for
a
network
maximum period for collision
configured
periodfor
of common
time(Eresolution phase
DCH
transmission
E-DCH. If the UE does not
continuation
back off),
Maximum Period for
receive its E-RNTI
on the Estartingcollision
with theresolution
transmission
Collision Resolution
AGCH
of
the last
MAC-i
PDU.
if
Phase for Common Echannel
upon
the
timer E.g.
reach
This
parameter
indicates
the
network
configured
DCH
the
maximum
period
forpower
which
uplink
period
ofresolution
timeinner
is setloop
to zero,
collision
phase,
control
algorithm
is used
in
then the
buffer
status
report
the
collision
has not
Uplink Inner Loop Power then
uplink
enhanced
is
piggybacked
withso
the last
been
resolvedstate.
and
UE
Control Algorithm in
CELL_FACH
Forthe
MAC-i
PDU
containing
user
releases
the
resources.
This
parameter
indicates
the
Uplink Enhanced
algorithm
1
inner
loop
power
data.
If thesize
network
TPC
step
for
uplink
inner
CELL_FACH State
control
is done
every
time
configured
period
time
is
loop
power
controlof
ininner
uplink
slot.
For
algorithm
2
set
to
"infinity",
implicit
enhanced
CELL_FACH
state.
power
controlisisdisabled.
done
Step Size of Uplink Inner loop
resource
release
Only
when
inner
loop
power
every 5 tim slots.
Loop Power Control in
conrol algorithm 1 is
Uplink Enhanced
selected, this parameter
CELL_FACH State
needs to be configured. For
algorithm 2, default value of
TPC step size is 1 and this
parameter is not needed.
Admission Control
Happy Bit Delay for

Common E-DCH
This parameter is used for

deciding the delay of
transmitting 'happy bit' by
UE, which is configured by
RNC for UE in uplink
enhanced CELL_FACH state.
RRC configures MAC with
the duration
Happy_Bit_Delay_Condition,
over which
evaluate
the
HSPA
type.to
The
value of
the
current
grantinrelative
to thefor
parameters
R8ExtHspa
TEBS
afterHSPA
application
dedicated
is get of the
E-TFC
selection
procedure.
according to the HSPA type
For
detail
0; and
thedescription
parametersplease
in
refers
to
TS25.321.
R8ExtHspa for common EThis
indicates
the
DCHparameter
is get according
to the
assumed
power
HSPA typeHS-PDSCH
1.
offset relative to P-CPICH/SCPICH power used for CQI
measurement in uplink
enhanced CELL_FACH state.
maximum bit rate of the
common E-DCH user in
uplink enhanced
CELL_FACH state.
RNC
HSPA Evolution
RNC
HSPA Evolution
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution

SIR Target for Common SIR target of the common EUTRAN Cell
E-DCH
DCH in uplink enhanced
CELL_FACH state.
HSPA Evolution
HSPA Type
HS-PDSCH
Measurement Power
Offset (UL Enhanced
CELL_FACH)
Maximum Bit Rate for

Common E-DCH User
ACK/NACK/CQI Support
on HS-DPCCH Indicator
in UL Enhanced
CELL_FACH State
Initial F-DPCH Power in
Uplink Enhanced
CELL_FACH State
Measurement Threshold
1 of Event E/F for SIR
Error
Downlink Rate Level
Threshold used for DTCP Measurement in
DASF-PS
Measurement Threshold
of Event A/B for
Transmitted Code Power
E-DPCCH Power
Boosting Support
Indicator

whether
ACK/NACK
and CQI
This parameter
indicates
are
supported
on
HS-DPCCH
Initial F-DPCH power in
in
uplink
enhanced
uplink
enhanced
CELL_FACH state.
state. The
CELL_FACH
largest value is a valid value,
it used to indicate that the
RNC not need to configure it
in PHYSICAL SHARED
CHANNEL
RECONFIGURATION
This
parameter
REQUEST,
and indicates
the powerthe
of
threshold
used
forDPCH
power
offset
of the
F-DPCH
is1 decided
by
triggering
E, F for
SIR
maximum
DL power,
which
NodeB. event
Error measurement.
defines
which threshold that
This
indicates
shall parameter
trigger event
A, B forthe
downlink
rate
level
threshold,
transmitted carrier power
In
D-TCP
based
PS
DRBC,
measurement.
the
thresholds
of
D-TCP
In PS DRBC, this threshold is
measurement
event A/B
related to the service
rateare
as
got
based on the rate level of
following:
the
Rateservice.
Level PS Service Rate
(R) Threshold of Event A/B
Level 1 R<= DlRateLevel[0]
EvtAbTcpThrd [0]
Level 2 DlRateLevel[0]<R<=
DlRateLevel[1] EvtAbTcpThrd
This
[1] parameter indicates
whether
the neighboring cell
Level 3 R>DlRateLevel[1]
supports
E-DPCCH
EvtAbTcpThrd
[2] power
boosting
or
not.
Other case, the threshold
and service rate
independent, and the
threshold is EvtAbTcpThrd
[0].
UTRAN Cell
HSPA Evolution
UTRAN Cell
HSPA Evolution
RNC
Power Control
RNC
Dynamic Radio
Bearer Control
RNC
AMR & WB-AMR,

Dynamic Radio
Bearer Control,
Handover Control
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
Cell Load Scene

Power Offset Relative to
E-HICH in Single Link
Condition for E-HICH of
Serving RLS in Macro
Diversity Condition (2ms
TTI)
Diversity Condition
(10ms
Power TTI)
Offset Relative to
Non-serving RLS in
Macro Diversity
Condition
(2ms
TTI) to
Power Offset
Relative
Non-serving RLS in
Macro Diversity
Condition
(10ms
TTI) to
Power Offset
Relative
E-RGCH in Single Link
Condition for E-RGCH of
Diversity Condition (2ms
TTI)
E-RGCH in Single Link
Condition for E-RGCH of
Diversity Condition
(10ms
Power TTI)
Offset Relative to
10ms TTI E-RGCH in
Single Link Condition for
E-RGCH of Non-serving
RLS in Macro Diversity
Condition
HSUPA Adaptive
Transmission Switch
E-DCH User Number

Level Used for HSUPA
Adaptive Transmission
Default E-DCH User

Number Level

whether the cell is high load
cell or not.
power offset relative to 2ms
TTI E-HICH in single link
condition for 2ms TTI E-HICH
of serving E-DCH RLS in
macro
diversity condition.
This parameter
indicates the
condition for 10ms E-TTI EHICH of serving E-DCH RLS
in
macro
diversity
condition.
This
parameter
indicates
the
condition for 2ms TTI E-HICH
of non-serving E-DCH RLS in
This
parameter
indicates the
macro
diversity condition.
condition for 10ms E-TTI EHICH of non-serving E-DCH
RLS parameter
in macro diversity
This
indicates the
condition.
TTI E-RGCH in single link
condition for 2ms TTI ERGCH of serving E-DCH
RLS parameter
in macro diversity
This
indicates the
condition.
This
parameter
TTI E-RGCH
in indicates
single linkthe
default
E-DCH
user
number
condition for 10ms E-TTI
Elevel.
When
the
HSUPA
RGCH of serving E-DCH
adaptive
transmission
RLS in macro
diversityswitch
is
closed,
get theindicates
HSUPA the
This
parameter
condition.
OLPC
parameters
based
on
power offset
relative
to 10ms
this
default E-DCH
user
TTI E-RGCH
in single
link
number
We get HSUPA
conditionlevel.
for E-RGCH
of nonOLPC
parameters
according
serving
E-DCH
RLS
in
macro
This
parameter
indicates
This
parameter
indicates
the
to
E-DCH
user
number
level
diversity
condition.
whether
HSUPA
transmission
E-DCH
user
number
level
as
following:
is adaptive.
When
this
used
foruser
HSUPA
adaptive
E-DCH
number
function
switch
is on, low
it will
transmission.
level
E-DCHvalues
user number
get
different
of
the
EdchNumLev[0]<=
medium
level
E-DCH
user
parameters
for
HSUPA
OLPC
EdchNumLev[1].
The E-DCH
number
high
level
based
on
the
E-DCH
user
user
number level is
NhrThrUpTti10[0]
number
in the
cell.
determined
according
to the
NhrThrUpTti10[1]
following:
NhrThrUpTti10[2]
E-DCH
User Number Level
NhrThrDownTti10[0]
E-DCH
User Number (N)
NhrThrDownTti10[1]
E-DCH
user
number low
NhrThrDownTti10[2]
level
N<=
EdchNumLev[0]
NhrThrUpTti2[0]
E-DCH user number medium
NhrThrUpTti2[1]
level
EdchNumLev[0]<N<=
NhrThrUpTti2[2]
EdchNumLev[1]
NhrThrDownTti2[0]
E-DCH
user number high
NhrThrDownTti2[1]
level
N>EdchNumLev[1]
NhrThrDownTti2[2]
UpThrSampNuTti10[0]
UpThrSampNuTti10[1]
UpThrSampNuTti10[2]
DwThrSampNuTti10[0]
DwThrSampNuTti10[1]
DwThrSampNuTti10[2]
UpThrSampNumTti2[0]
UpThrSampNumTti2[1]
UTRAN Cell
Configuration
Model Scene
Parameter
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
RNC
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Power Control
Dynamic Updating
Switch of E-AGCH
Power Offset
DL TPC Pattern 01
Count
P-CPICH Power Down

Step Size Used to
Switch Off Frequency
Intelligently(dB)
Times of Downgrade of
P-CPICH Power with
Equal Step Used to
Switch off Frequency
Intelligently
Time Interval between
Two Downgrade of PCPICH Power Used to
Switch Off Frequency
Intelligently(100ms)
Sub-service Type
Cell Altitude for Cell

Center(m)
Altitude Accurary(m)
Direction of Altitude for

Cell Center
Antenna Altitude(m)
Direction of Antenna
Altitude
If higher layers indicate by

"First RLS indicator" that the
radio link is part of the first
radio link set sent to the UE
and the value 'n' obtained
from this parameter "DL TPC
pattern 01 count" passed by
higher
layers is different
This parameter
indicatesfrom
0
then : dynamic updating of
whether
-E-AGCH
the TPCpower
pattern
shallis
offset
consist
instances of the
needed of
ornnot.
pair of TPC commands ("0" ,
"1"), followed by one instance
of TPC command "1", where
("0", "1") indicates the TPC
commands
to beindicates
transmitted
This parameter
the
in 2 consecutive
slots, step
P-CPICH
power down
-size
the used
TPC to
pattern
switch off
continuously
repeat butInshall
frequency intelligently.
be
forcibly
re-started
at the
order to protect UEs from
beginning
of
each
frame
This
parameter
indicates
being dropped because ofthe
where
CFN
mod
4 = of
0. Ptimes
of
downgrade
fast decrease
of P-CPICH
else
CPICH
power
with
step
power, this
step
canequal
not be
-used
The
TPC
pattern
shall
to
switch
off frequency
too
big.
consist only After
of TPC
intelligently.
commands "1".
PcpiPwrDnStepTm
times
This
parameter
indicates
the
The TPC
pattern
shall
step
down
of P-CPICH
time
interval
between
two
terminate
uplink
power,
theonce
power
will be
downgrade
ofbottom
P-CPICH
synchronisation
is achieved.
decreased to
power
used
to
switch
off
immediately .
frequency intelligently. This
This
parameter
the
time must
be bigindicates
enough to
sub
service
type,
used
for
complete the cell
numbering
for each
sub
reconfiguration
and handover
service.
0...5cell.
are used for
UE to other
siganlling service; 6...250 are
used for single service. Odd
number is configured for
downlink service; even
This
parameter
is onefor
of the
number
is configured
parameters
to
describe
the
uplink service
cell inparameter
type of "cell
centralthe
This
indicates
point".It direction
indicatesof
the
altitude
altitude
the
for the cell
center.
polygon
point.
When RNC
receives
the message
of the
This parameter
is one of
RANAP
LOCATION
parameters
to describe the
REQUEST
from
CN,
which
cell in type of
"cell
center
+
requires
reporting
the
cell radius", indicating the
location
result with
altitude accuracy.
Geographical Area (GA) of
the cell, if the cell is
described in type of "cell
center + cell radius", this
parameter decides how to fill
in the location results in
RANAP LOCATION
This
parameter
indicates the
REPORT.
This parameter
is
altitude
of the
transmission
one of the
parameters
to
antenna
cell.
describe in
thethe
cell
in type of
"cell center + cell radius".It
indicates of
whether
theAltitude.
altitude
Direction
Antenna
direction
of the cell
centerthe
is
This
parameter
indicates
above orofbelow
the sea level.
altitude
the transmission
antenna of the cell is above
or below the level.
RNC
Power Control
UTRAN Cell
Power Control
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
Service Related
Parameter
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
Degree of Antenna
Latitude

geographical latitude
External UTRAN
coordinates of the
Location Service
Cell
transmission antenna in the
cell.
Antenna Latitude Sign

latitude direction of the
External UTRAN
Location Service
transmission antenna is
Cell
south or north.
Degrees of Antenna
Longitude(degree)

External UTRAN
longitude of the transmission
Location Service
Cell
antenna in the cell
Antenna Type
Cell Description Type
Cell Radius
Geographical Area
Report Type
Confidence(%)
Inner Angle
Degrees of Latitude for

Cell Center(degree)
Latitude Sign for Cell

Center
Cell description type, which

This
parameter
indicates
the
indicates
the type
to describe
type
of
the
transmission
the cell, can be type of
antenna
cell or "cell
"polygon"inorthe
"arch",
center + cell radius". When
RNC receives the message
of RANAP LOCATION
REQUEST from CN, which
requires reporting the
location
results with
This
parameter
is one of the
Geographical
(GA)the
of
parameters toArea
describe
the
cell,
this
parameter
cell in type of "cell center +
decides
howindicating
to fill in the
cell radius",
the cell
location
results
in RANAP
radius. It takes the
cell center
LOCATION
REPORT.
This
parameter
indicates
the
transmission
antenna
as the
geographical
circle center. area report type
of the cell.when CN requires
RNC to report the location
result with the type of
Geographical Area (GA), this
parameter
decides
theof
format
This parameter
is one
the
of
the
report
in
detail.
parameters to describe the
confidence of the position
information.
inner angel of the
transmission antenna of the
This
cell. parameter indicates the
absolute value of the latitude
degree for the cell center.
This parameter is one of the
cell in type of "cell central
This
parameter
indicates
the
point".It
indicates
the
latitude
direction
of the
geographical
latitude
ofcell
the
center.
This parameter is one
cell center.
of the parameters to describe
the cell in type of "cell central
point".It indicates whether the
latitude direction of the cell
center is south or north.
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell

value of the longitude degree
for the cell center. This
parameter is one of the
Degrees of Longitude for
Cell Center(degree)
point".It indicates the
geographical longitude of the
This
cell center.
offset angle of the
Offset Angle
This
This
parameter indicates
identifies the
how
cell. parameter
absolute
value
of thebepolygon
many points
should
point
latitude.
RNC
included
in theWhen
polygon
of the
receives
of in
cell. If thethe
cellmessage
is described
LOCATION
Polygon Point Number RANAP
type of "polygon",
the best
This
parameter
the
REQUEST
fromindicates
CN,
which
number of points
is decided
latitude
direction
of
the
requires
reporting
the
during network planning.
polygon
point.
When RNC
location
with
Each cellresult
is described
with
receives
the
message
of of
Geographical
Area
(GA)
it's own number
of points.
Degree of Polygon Point RANAP
the cell, LOCATION
if the cell is
REQUEST
CN,
Latitude(degree)
described
infrom
type
of which
This parameter
indicates
the
requires
reporting
thepoint
"polygon",
this
parameter
value
of the
polygon
location
decides result
how
towith
fillRNC
in the
longitude.
When
Geographical
Area
(GA)
location results
in RANAP
receives
the message
of of
the
cell,
if
the
cell
is
LOCATION
REPORT. This
LOCATION
Polygon Point Latitude RANAP
described
type
of the
parameter
isfrom
oneCN,
of
REQUESTin
which
Sign
"polygon",
this
parameter
parameters
to
describe
requires reporting the the
decides
how
fill in the
cell in type
ofto
"polygon".It
location
result
with
location
in RANAP
indicatesresults
the geographical
Geographical
Area
(GA) of
LOCATION
REPORT.
latitude
the cell
polygon
point.
the
cell, of
if the
is This
Degrees of Polygon
parameter
is type
one of
described in
of the
Point Longitude(degree) parameters to describe the
"polygon", this parameter
cell
in type
ofto
"polygon".It
decides
how
fill in the
indicates
whether
the latitude
location results
in RANAP
direction
of
the
polygon
point
LOCATION
REPORT.
This
This
parameter
indicates
is
south
or
north.
parameter
oneget
of the
GPS Information Root
where RNCiscan
GPS
parameters
to
describe
the
information from.
cell in type of "polygon",
indicating the geographical
longitude
of the indicates
polygon if
HSDPA HS-DPCCH
This parameter
point.supports HSDPA HSACK/NACK
RNC
enhancement Support
DPCCH ACK/NACK
Indicator
enhancement.
Handover Based on
IMSI Support Indicator
Duration of Valid Cell

Load Info(s)
Inter-System DTM
Support Indicator

support IMSI based
handover.
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell

Cell
future use
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
External UTRAN
Location Service
Cell
RNC
Location Service
RNC
HSDPA Introduction

duaration of the inter-sys
This
indicates
cell'sparameter
load information
which RNC
Handover Control
whether
provide
DTM mode,
is valid to use.before
that
is whether provide interupdating.
RAT handover both for CS
domain services and PS
domain services at the same
time.0 indicates not support,
1 indicates support. Only
when parameter
PsInterSysHoSupp set to 1,
this parameter set to 1 is
available.
MBMS Enhanced
Broadcast Mode
Support Indicator

RNC supports MBMS
Enhanced Broadcast Mode
RNC
MBMS
Four E-DPDCHs
Allowed Indicator

whether 2SF2+S2SF4 can
be used by UE. 1 indicates
can use 2SF2+S2SF4,
otherwise can not.
RNC and PLMN
Dynamic Radio
Bearer Control
LCS Support Method
This parameter is used to

indicate if the LCS method
support.
RNC and PLMN Location Service

Loading based InterSys consider the target cell load
HO Support Indicator
Infomation during the inter
system handover procedure..
MBMS over Iur Support

Indicator

RNC supports MBMS UE
RNC
registration over Iur function.
MBMS
MBMS Multicast Mode

Support Indicator

RNC supports MBMS
Multicast Mode
MBMS
RNC

whether provide the
NACC(Network Assisted Cell
NACC Support Indicator
RNC and PLMN
Change)function.0 indicates
not support, 1 indicates
support.
Neighbouring Cell
RNC supports neighbouring
Monitoring Support
cell monitoring.When this
RNC and PLMN
Indicator
parameter is 1, rnc will start
neighbouring cell monitoring
PS Conversational RAB This parameter indicates if
for VoIP Support
RNC supports PS
RNC
Indicator
Conversational RAB for VoIP
Handover Control
RAN Performance
Monitor / Handover
control FD
VOIP Bearers
PS Inter-System
Handover Indicator

whether provide PS
handover to Inter-RAT
system.0 indicates not
support, 1 indicates support
PS Signalling RAB for

IMS Support Indicator

RNC supports PS Signalling
RAB for IMS
RNC
VOIP Bearers

MBMS PTP over HSDPA
MBMS PTP Service can be
Support Indicator
Beared on HSDPA..
Service-Based
Handover Support
Indicator
WB-AMR Speech
Support Indicator
Prior Redirect RAT

Indicator
Cell Altitude for Cell

Center(m)
Altitude Accurary(m)
Direction of Altitude for

Cell Center
Antenna Altitude(m)
Direction of Antenna
Altitude
Degree of Antenna
Latitude
Antenna Latitude Sign
RNC and PLMN MBMS

RNC supports Service-Based RNC and PLMN Handover Control
Handover

This
indicates
RNCparameter
supports WB-AMR
whether
provide
the
Speech
redirection information when
RRC Connection request is
rejected or RRC Connection
is released because services
are forced to release. If UE
receive the redirect cell
information, it will try to
This
parameter
one
access
to UMTSisby
theof the
parameters
to
describe
indicated frequency or tothe
the
cell
inparameter
typeRAT.
of "cell
centralthe
This
indicates
indicated
point".It direction
indicatesof
the
altitude
altitude
the
for the cell
center.
polygon
point.
When RNC
receives
the message
of the
This parameter
is one of
RANAP
LOCATION
parameters
to describe the
REQUEST
from
CN,
which
cell in type of
"cell
center
+
requires
reporting
the
location
result with
altitude accuracy.
Geographical Area (GA) of
the cell, if the cell is
described in type of "cell
center + cell radius", this
parameter decides how to fill
in the location results in
RANAP LOCATION
This
parameter
indicates the
REPORT.
This parameter
is
altitude
of the
transmission
one of the
parameters
to
antenna
cell.
describe in
thethe
cell
in type of
"cell center + cell radius".It
indicates of
whether
theAltitude.
altitude
Direction
Antenna
direction
of the cell
centerthe
is
This
parameter
indicates
above orofbelow
the sea level.
altitude
the transmission
antenna of the cell is above
or below the level.
geographical latitude
coordinates of the
cell.
RNC
AMR-NB & AMRWB
UTRAN Cell
Connection
Management
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service

latitude direction of the
UTRAN Cell
transmission antenna is
south or north.
Location Service
Degrees of Antenna
Longitude(degree)

longitude of the transmission UTRAN Cell
antenna in the cell.
Cell description type, which

This
parameter
indicates
the
indicates
the type
to describe
Antenna Type
type
of
the
transmission
the cell, can be type of
antenna
cell. or "cell
"polygon"inorthe
"arch",
center + cell radius". When
RNC receives the message
of RANAP LOCATION
Cell Description Type
REQUEST from CN, which
requires reporting the
location
results with
This
parameter
is one of the
Geographical
(GA)the
of
parameters toArea
describe
the
cell,
this
parameter
decides
howindicating
to fill in the
Cell Radius(m)
cell radius",
the cell
location
results
in RANAP
radius. It takes the
cell center
LOCATION
transmissionREPORT.
antenna as the
circle center.
Classified Zone Indicator whether the local cell is the
designated zone or not.
Confidence(%)
confidence
of the
positionthe
This parameter
indicates
information.
geographical area report type
of the cell.when CN requires
Geographical Area
RNC to report the location
Report Type
result with the type of
Geographical Area (GA), this
parameter decides the format
of
theparameter
report in detail.
This
indicates the
inner angel of the
Inner Angle
transmission antenna of the
This
cell. parameter indicates the
absolute value of the latitude
degree for the cell center.
Degree of Latitude for
Cell Center
This
parameter
indicates
the
point".It
indicates
the
latitude
direction
of the
geographical
latitude
ofcell
the
center.
This parameter is one
cell center.
Latitude Sign for Cell
of the parameters to describe
Center
the cell in type of "cell central
This
parameter
indicates
point".It
indicates
whetherthe
the
value
ofdirection
the longitude
latitude
of thedegree
cell
for
the is
cell
center.
This
center
south
or north.
parameter is one of the
Degrees of Longitude for
Cell Center
point".It indicates the
geographical longitude of the
cell center.
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
Offset Angle
Polygon Point Number
Degree of Polygon Point

Latitude(degree)
Polygon Point Latitude

Sign
Degrees of Polygon
Point Longitude(degree)
TUTRAN-GPS
Measurement Support
Indicator
Period NodeB Common
Measurement
Index for TUTRAN-GPS
Lcs over Iur Support

Indicator
SAS Support Indicator
SAS supported Mode
HSDPA Function Status

offset angle of the
This
This parameter
parameter indicates
identifies the
how
cell.
absolute
value
of thebepolygon
many points
should
point
latitude.
RNC
included
in theWhen
polygon
of the
receives
of in
cell. If thethe
cellmessage
is described
RANAP
LOCATION
type of "polygon",
the best
This
parameter
the
REQUEST
fromindicates
CN,
which
number of points
is decided
latitude
direction
of
the
requires
reporting
the
during network planning.
polygon
point.
When RNC
location
with
Each cellresult
is described
with
receives
the
message
of of
Geographical
Area
(GA)
it's own number
of points.
RANAP
the cell, LOCATION
if the cell is
REQUEST
CN,
described
infrom
type
of which
This parameter
indicates
the
requires
reporting
thepoint
"polygon",
this
parameter
value
of the
polygon
location
decides result
how
towith
fillRNC
in the
longitude.
When
Geographical
Area
(GA)
location results
in RANAP
receives
the message
of of
the
cell,
if
the
cell
is
LOCATION
REPORT. This
RANAP
LOCATION
described
type
of the
parameter
isfrom
oneCN,
of
REQUESTin
which
"polygon",
this
parameter
parameters
to
describe
requires reporting the the
decides
how
fill in the
cell in type
ofto
"polygon".It
location
result
with
location
in RANAP
indicatesresults
the geographical
Geographical
Area
(GA) of
LOCATION
REPORT.
latitude
the cell
polygon
point.
the
cell, of
if the
is This
parameter
is type
one of
described in
of the
parameters
to describe
the
"polygon", this
parameter
cell
in
type
of
"polygon".It
decides how to fill in the
indicates
whether
the latitude
location results
in RANAP
direction
of
the
polygon
point
This
parameter
indicates
LOCATION
REPORT.
This
is
south
or
north.
whether
the
cell
support
parameter is one of the the
measurement
onthe
GPS
parameters to based
describe
or
not.
cell inparameter
type of "polygon",
This
indicates the
indicating
theBgeographical
period Node
common
longitude
of theconfiguration
polygon
measurement
point. for TUTRAN-GPS,
number
which is used for indexing the
configuration of the set of
parameters for period report
of
hisTUTRAN-GPS.
parameter indicates if
RNC supports UE location
measurement over Iur
interface in LCS Function.
RNC supports SAS to
perform location service.If
supported RNC uses SAS,
else RNC uses inner-RNC
SMLC.
RNC supports SAS centric or
RNC sentric mode when
using
to perform
WhenSAS
the cell
supports
location
HSDPA ,service.
this parameter is
used to activate RAB
setup/configuration/handover
on hsdpa
channel.Modification of thi
parameter has no effect on
the delete or setup of the
HSDPA channel.
UTRAN Cell
Location Service
UTRAN Cell
Parameter for
future use
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Location Service
UTRAN Cell
Parameter for
future use
UTRAN Cell
Location Service
RNC
Location Service
RNC
Parameter for
future use
RNC
Parameter for
future use
Utran Cell
Admission
Control/HSDPA
Introduction
When the cell supports

HSUPA , this parameter is
used to activate RAB
setup/configuration/handover
HSUPA Function Status on hsupa
Utran Cell
channel.Modification of thi
parameter has no effect on
the delete or setup of the
When
cell supports
HSuPAthe
channel.
MBMS , this parameter is
MBMS Function Status
Utran Cell
used to activate MBMS
service
The
change
This TUTRAN-GPS
parameter indicates
the
T-UTRAN-GPS
limit and the
predicted
accuracy
class
of the UTRAN
Measurement Accuracy TUTRAN-GPS deviation limit
GPS timing of cell frames for
Class
together
define measurement
the related
UE positioning
thresholds for UTRAN GPS
The
TUTRAN-GPS
timing
of cell frameschange
for UE
limit
and themeasurements
predicted
positioning
TUTRAN-GPS Change TUTRAN-GPS deviation limit
which shall trigger the event
Limit
together
define the
on modification.
Therelated
thresholds
for
UTRAN
TUTRAN-GPS changeGPS
limit
timing
of cell
frames
indicates
change
of for UE
positioning
measurements
TUTRAN-GPS
value time
Specifies the
maximum
Predicted TUTRAN-GPS which
shall
trigger
the event
compared
to
previously
for GTP-PDU forwarding
at
Deviation Limit
on
modification.
The
reported
value,
which
shall
the
source
RNC
during
This
parameter
indicates the
predicted
TUTRAN-GPS
trigger
a new
report.
relocation
of SRNS.
on
modification
Node B
deviation
limit
indicates
For
each measurement
RAB successfully
common
of thethe
predicated
On Modification NodeB deviation
established
target
configurationinnumber
for
from
the
Common Measurement TUTRAN-GPS
system
and
originating
TUTRAN-GPS,
which
isfrom
used
latest
measurement
result,
the
PS
domain,
the
for indexing
the configuration
which
shall
trigger
a
new
for T-UTRAN-GPS
RELOCATION
COMMAND
of the set of parameters
for
report.
message
shall
contain
at
on modification report of
least
one pair ofindicates
Iu transport
This parameter
the
TUTRAN-GPS.
Specifies
theofIu
maximum
address
and
transport
code length
the
MNC time
BCD
MNC BCD Code Length in
for
queuing
of the
association
to be
used
for
the
of the
the RNC
neighboring
UTRAN
request
of
RAB
forwarding
of the DL N-PDU
cell..
establishment
or the
duplicates towards
modification.
relocation target. Upon
When
the of
request
Maximum Time for
reception
the to
establish
or
modify
one or
Forwarding GTP-PDU
RELOCATION COMMAND
several
RABs
is
put
in a
Data in SRNC(100ms)
message from the PS
Specifies
the
maximum
time
queue,
RNC
shall
start
domain,the
the
source
RNC
for
Reset
procedure
in
the
the
shalltimer
startTqueuing
the timer Tdatafwd.
RNC.
The
shall stop
Tqueuing
UponRNC
reception
of the
SRNS
the RNC
sends
a RESET
Maximum Time for RAB If
when
all
RABs
have
been
DATA
FORWARD
to the
CN and
Queuing in RNC(100ms) message
either
successfully
COMMAND
message
the
receives
no
RESET
established
or
modified
or
RNC starts the timer
ACKNOWLEDGE
message
failed
to establish or
modify.
Tdatafwd.
within
period
Trafc
thenfor
it
In
case
the
timer
Tqueuing
The
Iuatransport
bearers
shall
repeat
the
entire
Reset
the RAB
Assignment
RABs
subject
to data
Maximum Waiting Time expires,
Specifies
aterminates
guard
period
in
procedure.
The
sending
of
procedure
in the
forwarded
and
other
UTRAN
for RESET in RNC(s)
the
RNC
before
sending
a
the
RESET
message
shall
be
RNC
for allwhich
queued
RABs,
resources
used
for the
RESET
ACKNOWLEDGE
repeated
a
maximum
of
"n"
and
the
RNC
shall
respond
GTP-PDU
forwarding
message.
times
nreleased
is one
an operator
for
all where
of them
in
RABthe
process.
Are
After
a
guard
period
ofby
TRatC
matter.
After
the
n-th
ASSIGNMENT
RESPONSE
Timer Before Sending
RNC
only
when
the
timer
seconds
a
RESET
unsuccessful
repetition
the
message.
RESET Response to
Tdatafwd
expires. message
ACKNOWLEDGE
procedure
shall
be
stopped
CN(s)
shall
be maintenance
returned to the
CN,
and the
system
indicating
that all references
be informed.
at the UTRAN have been
cleared.
Admission Control
MBMS
UTRAN Cell
Location
UTRAN Cell
Location
UTRAN Cell
Location
UTRAN Cell
Location
External UTRAN
Handover Control
Cell
RNC
Handover Control
RNC
Parameter for
future use
RNC
connection
management
RNC
connection
management
Relocation
procedure
in time
the
Specifies the
maximum
source
RNC.
for Relocation Preparation
Upon
reception
the
procedure
in theofsource
RELOCATION
COMMAND
RNC.
message
source
RNC
When thethe
source
RNC
sends
shall
stop
the
timer
the RELOCATION
Trelocprep,
the timer
REQUIRED start
message,
it shall
Trelocoverall
and
terminate
start
the
timer
Trelocprep.
SRNC Overall Protective
the
Relocation
Upon
receptionPreparation
of the
Time for
procedure.
RELOCATION
COMMAND
Relocation(100ms)
If
the Iu Release
procedure
message
the source
RNC is
not
initiated
towards
the
shall stop the timer
source
RNCand
fromterminate
the CN the
Trelocprep,
SRNC Wait Time for
before theaexpiry
timerin
Specifies
guardof
period
Relocation
Preparation
Relocation
Trelocoverall,
thesending
source a
the
RNC before
procedure.
Preparation(100ms)
RNC
should
thefrom
Iu
RESET
RESOURCE
If there
is
no initiate
response
Specifies
the
maximum
time
Release
Request
procedure
ACKNOWLEDGE
message.
the Reset
CN to Resource
the RELOCATION
for
towards
theinCN
with
a before
cause
After
a guard
period
of
REQUIRED
message
procedure
the
RNC.
value
"Trelocoverall
expiry".
Timer for Sending
Tresetdelay,
a
RESET
timer
in
If
the Trelocprep
RNC sendsexpires
a RESET
RESOURCE RESET
RESOURCE
the
source RNC,
the source
RESOURCE
message
to the
Response to CN(100ms) ACKNOWLEDGE
message
RNC
shall
cancelno
the
CN and
receives
RESET
shall
be returned
to the CN,
Relocation
Preparation
RESOURCE
indicating
all references
procedurethat
by initiating
the
ACKNOWLEDGE
message
at
the
UTRAN
have
been
Relocation
Cancel
procedure
Timer for RESOURCE
within
a period
Tresetwait,
with the
appropriate
value
for
RESET Response from cleared.
then
it shall
repeat the
entire
the
Cause
IE, e.g.
CN(100ms)
Reset
Resource
procedure.
"Trelocprep
The sendingexpiry"
of the RESET
RESOURCE message shall
be
repeated
a maximum
This
parameter
specifies of
the
Emergency Call Redirect "n" times where n is an
RRC Redirect for emergency
Switch
operator
matter.
After the n-th
call function
switch.
unsuccessful repetition the
procedure shall be stopped.
RNC
Handover Control
RNC
Handover Control
RNC
connection
management
RNC
connection
management
RNC
Connection
Management
Inter-RAT IuUP Version

Selection
Specifies the IuUP Version in

RNC
the inter-RAT case
AMR-NB & AMRWB
Intra-RAT IuUP Version

Selection
Specifies the IuUP Version in

RNC
intra-RAT case
AMR-NB & AMRWB
CS 64K RB Mode
Switch
This parameter is CS 64k RB

RNC
mode control switch.
Services and Radio

Access Bearers FD
CBS Switch
Specifies the switch for the

CBS function.
CBS
CDT-IMEI Acquisition
Switch
Specifies the IMEI acquisition

RNC
switch in the CDT function.
Call Detail Trace
CDT/MR Overload
Threshold(%)
Specifies the CDT/MR

overload control function.
Call Detail Trace
RNC
RNC
CDT Function Switch
Specifies the CDT function

switch.
RNC
Call Detail Trace
MR Function Switch
Specifies the MR function

switch.
RNC
RAN Performance
Monitor
RNC
RAN Performance
Monitor
RNC
RAN Performance
Monitor
RNC
RAN Performance
Monitor
RNC
RAN Performance
Monitor
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
maximum number of "in

sync" received from L1 in idle
RNC
mode before the timer
T312Idle expires.
Connection
Management
MR-UE Location
Specifies the MR-UE location
Measurement Reporting measurement reporting
Interval(ms)
interval for the MR function.
RLC mode of the UE
measurement
report. If the
Specifies the MR-UE
MR-UE Measurement
value
is
AM
RLC,
RNC can
measurement reporting
Reporting Interval
request
UE
for
retransmission after receiving
continuous). If the value is
MR-UE Measurement
UM RLC, the retransmission
Report Transfer Mode
is not required. Usually,
report the results of the
important measurements in
AM mode and those less
Maximum
number
of (to
Specifies
MR-UE
important the
in
UM
mode
MR-UE Measurement
retransmissions
of
the
RRC
measurement
type
switch
reduce the traffic
volume
offor
Type Switch
CONNECTION
REQUEST
the
function. report and
the MR
measurement
message.
increase the system
UE
starts T300 after
capacity).
Maximum Number of
transmitting
the RRC
Maximum
number
of
CONNECTION
REQUEST
retransmissions
of
the CELL
RRC CONNECTION
message.
IfURA
T300
expires,
UPDATE
/
UPDATE
REQUEST Message
UE
shall retransmit the RRC
message.
(N300)
CONNECTION
SETUP
UE starts T302 after
REQUEST
message.
Maximum
number
of If the
Maximum Number of
transmitting the CELL
message retransmission
of the UE
Retransmissions of the retransmissions
UPDATE/URA
UPDATE
number
is Ifgreater
than N300,
CAPABILITY
INFORMATION
CELL/URA UPDATE
message.
T302
expires,
UE
shall
enter
idle
message.
Message (N302)
UE shall retransmitmode.
the CELL
UE
starts T304UPDATE
after
UPDATE/URA
Maximum Number of
transmitting
message. If the
the UE
message
Retransmissions of the CAPABILITY
INFORMATION
retransmission
number is
UE CAPABILITY
message.
If T304
greater than
N302,expires,
UE shall
INFORMATION
UE
shall
the UE
enter
idleretransmit
mode.
Message (N304)
CAPABILITY INFORMATION
the message
Maximum Number of "In message.
maximum If
number
of "in
retransmission
number
is
Sync" Received from L1 sync" received from
L1 in
greater
than
N304,
UE
shall
in Connected Mode
connected mode before the
initiate
a cell update
(N312 in Connected
timer T312Connected
procedure.
Mode)
expires.
Maximum Number of "In
Sync" Received from L1
in Idle Mode (N312 in
Idle Mode)
Maximum Number of
Successive "Out of
Sync" Received from
L1(N313)
Maximum Number of
Successive "In Sync"
Received from L1
During T313 is Activated
( N315)
Waiting Time After UE
Sending RRC
CONNECTION
REQUEST
Message(T300)
Sending CELL/URA
UPDATE
Message(T302)
Sending UE
CAPABILITY
INFORMATION
Message(T304)
Period of Cell/URA
Update When UE is in
CELL_FACH/CELL_PC
H/URA_PCH
State(T305)
Waiting Time for Cell
Reselection After UE is
out of Service(T307)
Waiting Time After
Sending RRC
CONNECTION
RELEASE COMPLETE
Message in CELL_DCH
State(T308)
Waiting Time After
Requesting Connection
Establishment in Other
System(eg. GSM)
(T309)(s)
Waiting Time for
Receiving "In Sync" from
L1 in Connected Mode
(T312 in Connected
Mode)(s)
Waiting Time for
Receiving "In Sync" from
L1 in Idle Mode (T312 in
Idle Mode)(s)
Maximum number of
successive "out of sync"
received from L1.
In CELL_DCH state, after
receiving
consecutive
UE
Timer.N313
Waiting
Time After
Maximum
number
of
"outSending
of sync"
indications
from
UE
RRC
successive
"in
sync"
received
layer
1,
UE
shall
start
T313.
CONNECTION SETUP
from
L1T313
during
T313 isupon
During
running,
REQUEST
Message.
activated.
receiving
UE
starts N315
T300 successive
after
In
after
"inCELL_DCH
sync" indications
transmitting
thestate,
RRCfrom
receiving
N313
consecutive
layer 1, UE shallREQUEST
stop and
CONNECTION
"out
oftimer
sync"
indications
from
UE
timer.
Waiting
After
reset
IfTime
T313
message.
IfT313.
T300
expires,
layer
1,
UE
shall
start
T313.
UE
Sending
CELL/URA
expires,
UE
shall
consider
it
UE shall retransmit the RRC
During
T313
running,
upon
UPDATE
Message.
as
a
"Radio
link
failure".
CONNECTION SETUP
receiving
successive
UE
starts N315
T302
after If the
REQUEST
message.
"in
sync" indications
from
transmitting
the CELL
message
retransmission
UE
timer.
Waiting
Time
After
layer
1,
UE
shall
stop
UPDATE/URA
UPDATE
number is greater thanand
N300,
UE
Sending
UE
CAPABILITY
reset
timer
T313.
If
T313
message.
If
T302
expires,
UE shall enter idle mode.
INFORMATION
expires,
shallMessage.
consider
it
UE
shall UE
retransmit
the CELL
UE
starts
T304
after
as
a
"Radio
link
failure".
UPDATE/URA
UPDATE
Start: Transmission of RRC
transmitting
UE
message.
If the
the REQUEST
message in
CONNECTION
CAPABILITY
INFORMATION
retransmission
number is
case of connection
message.
If T304
expires,
greater
than
N302,
UE shall
establishment
for reasons
UE
shall
retransmit
the UE
enter
idle
mode.
UE
timer.
Cell/URA
other
thanPeriod
MBMSofreception.
CAPABILITY
INFORMATION
Update
When
UE
is
in
Stop: Reception of RRC
message.
If the SETUP.
message
Start:
Transmission
of CELL
CELL_FACH/CELL_PCH/UR
CONNECTION
retransmission
number
is
UPDATE/URA
UPDATE.
A_PCH
State.
At expiry:
Retransmit
RRC
greater
than
N304,
UE
shall
Stop:
of CELL
If
T305Reception
expires and
UE
CONNECTION
REQUEST
if
initiate
a"out
cell
update
UPDATE
CONFIRM
/ URA
detects
of
service
area",
message
retransmission
procedure.
UPDATE
CONFIRM.
UE
shall=<
start
T307.
number
N300,
else go to
UE
timer.
timeCELL
for
At
expiry:
Retransmit
Idle modewaiting
UE
timer.
Waiting
Time
After
Start:
Transmission
of UE
reentering
service
area
after
UPDATE/URA
UPDATE
if
Start:
Entering
CELL_FACH
Sending
RRC
CONNECTION
CAPABILITY
INFORMATION
UE
is
out
of
service.
message
retransmission
or
URA_PCH
or CELL_PCH
RELEASE
Stop:
of
UE
If
T305Reception
expires
and
UE go to
number
=< COMPLETE
N302,
state.
Reception
ofelse,
CELL
Message
in
CELL_DCH
CAPABILITY
INFORMATION
detects
"out
of
service
area",
Idle
mode
UPDATE CONFIRM / URA
State.
CONFIRM.
UE
shall
start
T307.
During
UPDATE CONFIRM.
UE
starts
T308
after
At
expiry:
Retransmit
UE or
T307
running,
ifCELL_DCH
UE dectects
Stop:
Entering
transmitting
the
RRC
CAPABILITY
INFORMATION
"in
Idleservice
stat. area", UE stop
CONNECTION
RELEASE
ifAtmessage
retransmission
T307.
If T307
expires,
UE
expiry:
Transmit
CELL
COMPLETE
message.
If
number
=<
N304,
else
enter
Idle
mode.
UPDATE if T307 is not initiate
T308
expires,
UE
shall
a
cell
update
procedure.
activated and the UE detects
retransmit
the
RRC
Start:
When
the
timer
T305
"in service
area".
Otherwise,
CONNECTION
RELEASE
has
expired
the UE
if T307
is notand
active,
start
COMPLETE
message.
If
the
detects
"out
of
service
UE
timer.
Waiting
Timearea".
After
T307.
message
retransmission
UE
timer
in
connected
mode.
Stop:
When
the
UE
detects
Requesting Connection
number
is greater
than N308,
Waiting
Time
for
"in
service
area".
Establishment
in Receiving
Other
UE
shall enter
idle
"In
Sync"
from
L1to
inmode.
At expiry:
Transit
idle
System(eg.
GSM).
connected
mode.
mode
Start:
Transmission
RRC
In
connected
mode, of
for
Start:
Upon reception
of
CONNECTION
RELEASE
establishing
dedicated
CELL CHANGE ORDER
UE
timer
in idle
mode.
COMPLETE
channel,
UE
shall
receive
FROM
UTRAN
message
Waiting
for Receiving
Stop: Successful
notTime
stopped
consecutive
N312Connected
Stop:
response to
"In
Sync"
L1 inRRC
Idle L1
At
expiry:
Transmit
"In
Sync" from
indication
from
a connection
establishment
Mode.
CONNECTION
RELEASE
before
requestT312Connected
in the new cell.
In
mode,
establishing
COMPLETE
iffor
message
expires.
At Idle
expiry:
Resume
the
dedicated
channel,
UE shall
retransmission
number
connection to UTRAN
receive
consecutive
N312Idle
<=N308,
elsethe
goUE
to idle
Start:
When
starts
to
"In
Sync" dedicated
indication from
mode.
establish
CH L1
before
T312Idle
expires.
Stop: When
the UE
detects
N312 "in sync" indication
Start:
When the UE starts to
from L1.
establish
CH
At expiry: dedicated
The criteria
for
Stop:
When
the UE detects
physical
channel
N312
"in sync"failure
indication
establishment
is
from
L1.
fulfilled
At expiry: The criteria for
physical channel
establishment failure is
fulfilled
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
Completion
of Cell Update
Sychronization.
When
Radio
Link
Fails
and
In CELL_DCH
state,
after
Radio
Bearer(s)
Associated
receiving
N313 consecutive
with
T314
Exist.
"out of
sync"
indications from
layertimer.
1, UE
shall start
UE
Waiting
TimeT313.
for
Start:
the
criteria
for
DuringWhen
T313of
running,
upon
Completion
Cell
Update
radio
link
failure
are
receiving
N315
successive
When
Radio
Link
Fails and
Waiting Time After
fulfilled.The
timerAssociated
is started
"in sync"
indications
from if
Radio
Bearer(s)
DPCCH Established in radio bearer(s) that are
layer
1,
UE
shall
stop
and
with T315 Exist.
CELL_DCH State
associated
with T314
exist or
reset timer T313.
If T313
Losing Sychronization
ifexpires,
only When
RRC
exists
UE connection
shall
consider
Start:
the criteria
for it
(T313)(s)
only
to
thefailure
CS
domain.
as
a
"Radio
link
failure".
radio
link
are
Waiting Time for
Stop:
When timer
the Cell
Updateif
fulfilled.The
is started
Completion of Cell
procedure
has
been
Start: bearer(s)
When thethat
UE are
detects
radio
Update When Radio
completed.
consecutive
N313
"outexist
of or
associated with
T314
Link Fails and Radio
At
expiry:
if
timer
T302
UE
timer.
Waiting
Time
for
sync"
indication
from
L1.
if only RRC connection is
exists
Bearer(s) Associated
running,
UEPS
shall
continue
Cell
Selection/Reselection
Stop:
When
the
UE
detects
only
to
the
domain.
with
T314
Exist
Waiting
Time
for(T314) awaiting
CELL
After
UE
is out
ofCell
Service
in
consecutive
N315
"inUpdate
sync"
Stop:
When
theUPDATE
Completion of Cell
CONFIRM
or
CELL_PCH/URA_PCH
State.
indication from
L1. UPDATE
procedure
hasURA
been
Update When Radio
CONFIRM
message
At expiry: The
criteriafrom
for
completed.
Link Fails and Radio
UTRAN.
Start:
When
the
Radio
Link
failure
is detects
fulfilled.
At expiry: if timerUE
T302
is
Bearer(s) Associated
ifoftimer
iscontinue
not
"out
service
area"
in
running,
UET302
shall
with
T315
Exist
running
T315 is
Waiting
Time
for(T315)
Cell
URA_PCH
ortimer
CELL_PCH
awaitingand
CELL
UPDATE
running,
UE
shall
release
state
CONFIRM or URA UPDATE
radio
bearer(s)
After UE is out of
Stop:
Whenmessage
thethat
UE are
detects
CONFIRM
from
associated
with
T314.
Service in
"in
service
area".
UTRAN.
if
T302is
and
T315
CELL_PCH/URA_PCH At expiry:
cell
if timers
timerInitiate
T302
notupdate
are not running,
UE
shallis
State(T316)
procedure
asT314
cause
running
andusing
timer
release
radiorelease
resources
"Re-entering
service
area" if
running,all
UEitsshall
Specifies
the
MBR
value
and
enter
idle
mode.
"in
service
area"that
is detected.
radio
bearer(s)
are in
DL Controled MBR(bps) the
DL Controled
MBR
Otherwise
start
T317,
associated
with timer
T315.
testing
function
.
transit
to
CELL_FACH
state
if timers T302 and T314
and
initiate
cell
update
are not running, UE shall
procedure
theresources
UE
release all when
its radio
detects
"inthe
service
area".
Specifies
switch
for the
and
enter
idle
mode.
DL Controled MBR
DL Controled MBR testing
Switch
function.
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
RNC
Connection
Management
Utran Cell
Dynamic Radio
Bearer Control
Utran Cell
Dynamic Radio
Bearer Control
UTRAN Cell
Parameter for
future use
UTRAN Cell
Parameter for
future use
UTRAN Cell
RAN Performance
Monitor
Specifies the MBR value in

UL Controled MBR(bps) the UL Controled MBR
testing function .
Utran Cell
Dynamic Radio
Bearer Control
Specifies the switch for the

UL Controled MBR testing
function.
Utran Cell
Dynamic Radio
Bearer Control
Specifies the MR-CELL

MR-CELL Measurement
measurement switch for the
Switch
MR
function.
Specifies
the MR-CELL
measurement reporting
MR-CELL Measurement MR-CELL measurement
Reporting Interval
reporting interval is the
Coefficient
multiple of the Report
Periodicity for the cell
common measurement
report.
Specifies the MR-UE
MR-UE Measurement
measurement switch for the
Switch
MR function.
UL Controled MBR
Switch

Indicator (N=0..15)
Cell Barred Indicator
Cell Reservation
Extension
Cell Identity
This parameter is the access

class barred indicator for
UTRAN Cell
AC0-AC15.
This parameter is cell barred
indicator. If the cell barred
indicator
is set tois 'Barred',
This parameter
cell
UTRAN Cell
UEs
are
not
permitted to
reservation extension
select/re-select
this'reserved',
cell, even
indicator. If it is set
for
emergency
calls.
if the value of Intra-frequency
Cell Reselection Indicator is
'not allowed', UEs shall
UTRAN Cell
behave as if cell status
"barred" is indicated. And if
cell status status 'not barred'
is indicated , the "Cell
Cell
Identity is
valid onlyisin
Reservation
Extension"
the
RNC where the cell
UTRAN Cell
invalid.
locates.
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
Parameter
Increment to the
Minimum Required
Received Level in the
Cell (DeltaQrxlevmin)
(dB)

extension of Qrxlevmin,
UTRAN Cell
which means Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin.
Idle Mode and

Common Channel
Behavior
Increment to the
Minimum Required
Cell Configuration Tag

indicating whether
DeltaQrxlevmin used for cell
reselection is configured or
not.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior

whether
HCS serving
cell
This parameter
is intrainformation
is
configured
frequency cell reselectionor
not.
indicator. If cell is barred , if
the value of this parameter is
'Allowed', UE is allowed to
Intra-frequency Cell
select other intra-frequency
Reselection Indicator
cell in case it satisfies the cell
selection/relection condition.
If it is set 'Not Allowed', when
cell
barred, UE
will not the
Thisisparameter
indicates
select another
intraInter-frequency Scaling scaling
factor for
cell
Factor for Treselection frequency
reselectioncell.
timer for the interfrequency
case.
If UE is not detected in high
mobility state, the cell
reselection timer value for the
Inter-frequency Scaling
inter-frequency case is
Factor for Treselection
Treselections or
Configuration Tag
Treselections, PCH or
Treselections, FACH
multiplexing
thisindicates
factor. the
This parameter
Inter-RAT Scaling Factor scaling factor for cell
for Treselection
reselection timer for the interfrequency case.
HCS Serving Cell
Information
Configuration Tag
Inter-RAT Scaling Factor

for Treselection
Configuration Tag
Maximum Number of
Cell Reselections (NCR)
Maximum Number of
Cell Reselections in
Case of Non-HCS
Usage (Non-HCS_NCR)
Duration for Evaluating
Allowed Amount of Cell
Reselection(s) in Case
of Non-HCS Usage
(Non-HCS_TCRmax)(s)
Non-HCS_TCRmaxHyst
Cell Reserved for

Operator Use
Inter-System Information
Configuration Tag
Quality Threshold Level
for Applying Prioritised
Hierarchical Cell
Reselection (QHcs)
When Measurement
Quantity
is CPICHLevel
Quality Threshold
Ec/No(dB)
Hierarchical Cell
Reselection(QHcs)
When Measurement
Quantity is CPICH
RSCP(dBm)
Reselection Hysteresis 1
of Serving Cell
(QHyst1s)(dB)
of Serving Cell for UE in
CELL_FACH State
(QHyst1s, FACH )(dB)
If UE is not detected in high

mobility state, the cell
inter-RAT case is
Treselections or
Treselections, FACH
multiplexing
thisindicates
factor. the
This parameter
maximum number of cell
If
UE is detected
in high
reselections
in case
of HCS
mobility
usage. state, the cell
inter-RAT case is
Treselections or
Treselections, FACH
multiplexing this factor and
Speed
dependent
This parameter
indicates the
ScalingFactor
for
duration for evaluating
Treselection.
allowed amount of cell
reselection(s) in case of nonHCS usage.
additional time period before
the UE can revert to lowmobility measurements in
case parameter
of non-HCS usage.
This
This parameter is
is cell
a switch
reserved
indicator
indicating whether for
inter-RAT
operator
use.
If the valueused
is
information
parameters
'reserved',
the
cell
cannot
be
for cell reselection are
campped
on,
except
for
configured or not. If the value
particular
UEs, if so indicated
is
False, inter-RAT
in
the system
information.
information
parameters
are
not configured to UE, and UE
performs the inter-RAT
measurement periodically. If
the value is True, inter-RAT
This
parameter
indicatesare
the
information
parameters
quality
threshold
for
configured
to UE,levels
and UE
applying
prioritised
judges whether
to perform
hierarchical
cell
reselection,
the inter-RAT
measurement.
when
measurement
quantity
For details please refer
to TS
is
CPICH
Ec/No.
25.304.
quality threshold levels for
applying
prioritised
This parameter
indicates the
hierarchical
cell reselection,
hysteresis value
for FDD
when
quantity
cells inmeasurement
case the quality
is
CPICH
RSCP.
measure
for cellindicates
selectionthe
This parameter
and reselection
set to
hysteresis
valueis(Qhyst)
CPICH
RSCP
or Cpich EcNo.
when UE
is in CELL_FACH,
In
cell-ranking
criterion
R of
used
for FDD cells
in case
cell
reselection,
the
R
value
the quality measure for cell
of
servingand
cell reselection
equals to the
selection
is
measured
value
plusor
the
set to CPICH RSCP
Cpich
hysteresis
value.
For details
EcNo.
If this
parameter
is not
please
refer
to TSQhyst1s
25.304.
provided
in SIB4,
shall be used. In cell-ranking
criterion R of cell reselection,
the R value of serving cell
equals to the measured value
plus the hysteresis value. For
details please refer to TS
25.304.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
CELL_PCH or
URA_PCH State
(QHyst1s, PCH)(dB)
of Serving Cell (QHyst2s
s)(dB)
CELL_FACH State
(Qhyst2s, FACH)(dB)
CELL_PCH or
URA_PCH State
(QHyst2s, PCH)(dB)
Minimum Required
Quality Level in the Cell
(Qqualmin)(dB)
Minimum Required
Cell (Qrxlevmin)(dBm)
for Cell Selection and
Reselection
Inter-System
Measurement Trigger
Threshold for HCS Cell
Reselection (SHCS,
RAT)(dB)
SHCS, RAT
Configuration Tag
Broadcast in either SIB3

or SIB4
Inter-Frequency
Measurement Trigger
Threshold for Cell
Reselection
(Sintersearch)(dB)

hysteresis value (Qhyst)
when UE is in CELL_PCH
/URA_PCH, used for FDD
cells in case the quality
measure for cell selection
and reselection is set to
CPICH RSCP or Cpich EcNo.
If
thisparameter
parameterindicates
is not the
This
provided
in
SIB4,
Qhyst1s
hysteresis value for
FDD
shall in
becase
used.the
In quality
cell-ranking
cells
criterion
Rfor
ofcell
cellselection
reselection,
measure
This
parameter
indicates
the
R
value
of
serving
cellthe
and
reselection
is(Qhyst)
set to
hysteresis
value
equals
to
the measured
value
CPICH
Ec/No.
In cell-ranking
when
UE
is in CELL_FACH,
plus
the
hysteresis
value.
For
criterion
R
of cell
reselection,
used
forplease
FDD
cells
in
case
details
refer
to
TS
the quality
R valuemeasure
of serving
the
forcell
cell
25.304.
equals
to and
the measured
This
parameter
indicatesvalue
the
selection
reselection
is
plus
For(Qhyst)
details
hysteresis
value
set toQhyst2s.
CPICH
Ec/No.
If this
please
refer
to
TSprovided
25.304. in
when
UE
isisin
CELL_PCH
parameter
not
/URA_PCH,
used
for
FDD
SIB4, Qhyst2s shall be
used.
cells
in
case
the
quality
In cell-ranking criterion R of
measure
for cell the
selection
cell reselection,
R value
and
reselection
is set to
to the
of serving
cell equals
CPICH
Ec/No.
this the
measured
valueIf plus
This
parameter
the
parameter
is notindicates
provided
in
hysteresis
value.
For details
minimum
required
quality
SIB4,
Qhyst2s
shall
be
used.
please refer to TS 25.304.
level
of the cellcriterion
which R of
In cell-ranking
satisfies
the
condition
of
cell reselection, the R value
being
selected
or
reselected
of serving cell equals to the
This
parameter
indicates
by
UE.
When
the
measured
value
plus the the
minimum
required
received
measurement
quantity
is
hysteresis value.
For
details
power
level
of
the
cell
CPICH
Ec/No,
thewhich
please refer
to only
TS 25.304.
satisfies
the
condition
ofcell
measured
quality
of the
being
selected
or
reselected
This
parameter
indicates
is over
Qqualmin
can
the the
cell
by
When
the
inter-RAT
measurement
be UE.
selected.
measurement
quantity
triggering threshold
for is
HCS
CPICH
RSCP, only the RAT)
cell
reselection(SHCS,
measured
used
by UEreceived
to judgepower
whether
level of themeasurement
cell is over
inter-RAT
This
parameter
indicates
Qrxlevmin
can the
cell be the
should
be performed.
measurement
quantity
for cell
selected.
Assume the received level
of
selection
and
reselection.
serving cell is Srxlev, the
quality of serving cell is
Squal, if Srxlev<=SHCS, RAT
or SHCS, RAT is not
configured, UE performs
This
parameter
is a switchin
inter-RAT
measurement;
which
indicates whether
case Srxlev>SHCS,
RAT , if
SHCS,
RAT isSearchRAT,
configured or
Squal>Slimit,
UE
not.
SHCS,
RATinter-RAT
is not
doesIfnot
perform
configured,
UE ifperforms
measurement,
Squal
inter-RAT
measurement,
<=Slimit, SearchRAT,
otherwise
UE judges
whether
This
parameter
indicates
the
performs
inter-RAT
to
performs inter-RAT
inter-frequency
measurement
measurement
on
the
This
parameter
indicates
measurement.
For
details
triggering
threshold
forcells
cell
neighboring
inter-RAT
whether
the
cell
please
refer toHCS
TS 25.304.
reselection(Sintersearch)
having higher
priority.
selection/reselection
used
by UEplease
to judge
whether
For details
refer
to TS
parameters
are measurement
broadcast in
inter-frequency
25.304.
SIB3
SIB4.
shouldorbe
performed. When
HCS is not used, if the quality
of serving cell exceeds
Sintersearch, UE may
choose to not perform interfrequency measurement; if
the quality of serving cell is
not larger than Sintersearch
or if Sintersearch is not
inter-frequency
measurement. For details
please refer to TS 25.304.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior

Sintersearch is configured or
not. Ifparameter
the value indicates
is False, the
This
Sintersearch
is not
intra-frequency
measurement
configured
to UE, and
triggering threshold
forUE
cell
performs
the
inter-frequency
reselection (Sintrasearch)
Sintersearch
measurement
If
used by UE to periodically.
judge whether
Configuration Tag
the
value
is
True,
intra-frequency measurement
Sintersearch
is configured
to
should
be performed.
When
This
parameter
indicates
the
UE,
and
UEused,
judges
whether
Intra-Frequency
HCS
is
not
if
the
quality
This
parameter
is a switch
inter-RAT
to
perform
the exceeds
interMeasurement Trigger
of
serving measurement
cell
indicating
whether
triggering
threshold
for higher
frequency
measurement.
For
Threshold for Cell
Sintrasearch,
may
Sintrasearch
isUE
configured
or
HCS
priority
cell
details
please
refer
to
TS
Reselection
choose
to value
not perform
intranot.
If
the
is
False,
reselection(Slimit,
25.304.
(Sintrasearch)(dB)
frequency measurement;
if
Sintrasearch
is notby UE to
SearchRAT)
used
the
quality of
serving
cell
is
configured
to
UE,
and
UE
judge
whether
inter-RAT
not
larger
than
Sintrasearch
performs
the
intra-frequency
measurement
should
be
Sintrasearch
or
if
Sintrasearch
is not
measurement
periodically.
If
performed.
Assume
the
Configuration Tag
configured,
UE
performs
the
value
is
True,
received
level of serving cell
intra-frequency
Sintrasearch
configured
to
is
Srxlev, the is
quality
of
measurement.
For details
andcell
UEisjudges
whether
High HCS Priority Inter- UE,
serving
Squal,
if
please
referthe
to intraTS 25.304.
to
perform
system Cell
Srxlev<=SHCS,
RAT or
measurement.
For
Measurement Threshold frequency
SHCS, RAT
is not
details
please
refer
to
TS
This
parameter
indicates
the
for Cell Reselection
25.304.
factor
of cell
(Slimit, SearchRAT)(dB) scaling
inter-RAT
measurement;
in
reselection
timer in UE's
case Srxlev>SHCS,
RAThigh
, if
mobility
state.SearchRAT,
For UE UE in
Squal>Slimit,
UE
Speed Dependent
high
mobility
state,inter-RAT
its cell
does
not
perform
Scaling Factor for
reselection
timer
value
measurement,
if Squal
Treselection
equals
to
Treselections
or
<=Slimit,
SearchRAT,
This
parameter
indicates
the
Treselections,
PCH
or
performs
inter-RAT
This
parameter
is a for
switch
triggering
threshold
HCS
Treselections,
FACH
measurement
the
Speed Dependent
which
indicateson
whether
cell
reselection(SsearchHCS)
multiplexing
this
factor.
neighboring
inter-RAT
cells
Scaling Factor for
scaling
factor
for
cell
used by UE to judge whether
having
higher
HCS
priority.
Treselection
reselection
timer
in
UE
high
intra-frequency and interFor
details
please
refer
to TS
Configuration Tag
mobility
state
is
configured
or
frequency measurements
25.304.
not.
should be performed. When
This
a switchto
Measurement Trigger
UE's parameter
serving cellisbelongs
whether
Threshold for HCS Cell which
HCS, ifindicates
the received
level of
SsearchHCS
configured
or
Reselection
serving cell is is
not
larger than
not.
When
UE's
(SsearchHCS)(dB)
SsearchHCS
or indicates
ifserving cell
This
parameter
the
belongs
tomeasurement
HCS,
if the quality
SsearchHCS
is not
inter-RAT
of
serving
cell
is
not
larger
configured,
UE performs
triggering
threshold
for
cell
than
SsearchHCS,
UE
measurements on all RAT)
intrareselection(Ssearch,
SsearchHCS
performs
intra-frequency
and
frequency
and
inter- whether
used by UE
to judge
Configuration Tag
inter-frequency
frequency
neighboring
cell.
inter-RAT measurement
measurements;
if referWhen
For details
please
to TS
should
be performed.
SsearchHCS
is
not
25.304.
Inter-System
HCS
is not used, if the quality
configured,
UEexceeds
always
Measurement Trigger
of serving cell
performs
intra-frequency
Threshold for Cell
Ssearch, RAT, UE may and
inter-frequency
Reselection (Ssearch,
choose to not perform intermeasurement.
RAT)(dB)
RAT
measurement; if the
quality of serving cell is not
larger than Ssearch, RAT or
This
parameter
the
if Ssearch,
RAT indicates
is not
Tbarred
barred
time
of
a
barred
cell.
inter-RAT measurement. For
details please refer to TS
25.304.
period for evaluating allowed
TCRmax
amount of cell reselection(s)
in case of HCS usage.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior

additional time duration
before the UE transits from
TCrMaxHyst
high-mobility state to lowThis
parameter
the
mobility
state in indicates
case of HCS
cell
reselection timer value.
usage.
UE shall reselect the new cell
if the new cell is better
Cell Reselection Timer This parameter indicates the
ranked than the serving cell
Value (Treselections)(s) cell reselection timer value
according
to use
the cell-ranking
the UE shall
in RRC
criterion R during
a time
connected
mode state
interval
indicated
by
CELL_FACH
if provided
in
Cell Reselection Timer Treselections.
SIB4,
otherwise
Value for UE in
Treselections
bevalue
used.
cell reselectionshall
timer
CELL_FACH State
UE
shall
reselect
the
new
cell
(Treselections, FACH)(s) the UE shall use in RRC
if the new cell
is best
ranked
connected
mode
states
toand
the cell-ranking
Cell Reselection Timer according
CELL_PCH
URA_PCH if
criterion
R
during
time
Value for UE in
provided in SIB4, a
otherwise
interval
indicated
by
the
cell
CELL_PCH or
Treselections shall be
used.
reselection
timer
value.
URA_PCH State
UE shall reselect the new cell
(Treselections, PCH)(s) if the new cell is best ranked
according to the cell-ranking
criterion
R during
a time
This parameter
indicates
Switch of Deferred
interval
indicated
by
the cell
whether deferred
SIB11/11bis/12 Support reselection timer value.
SIB11/11bits/12 is supported.
Intra-frequency reporting
quantity SIB3 when
SIB11/11bis/12 deferred
reading
UE Inter-frequency
Event Measurement
CPICH Ec/No
UE Inter-frequency
Event Measurement
CPICH RSCP
UE Event Report
Own System CPICH
Ec/No(EUTRAN FDD)
UE Event Report
Own System CPICH
RSCP(EUTRAN FDD)
UE Periodic
Measurement
CPICH Ec/No

when SIB11/11bis/12 are
deferred reading, the intrafrequency reporting quantity
This
parameter
for RACH
reportindicates
in RRC the
UE
event report
configuration
connection
request
message.
index for CPICH Ec/No, used
of the set of inter-frequency
measurement parameters for
UE
event
reportdecided
configuration
event
reporting
by
index
for CPICH
RSCP, used
UE when
measurement
for
indexing
the configuration
quantity
is CPICH
Ec/No.
of the set of inter-frequency
This
is the UEby
eventparameter
reporting decided
event
report
configuration
UE when
measurement
index
forisCPICH
quantity
CPICHEc/No,
RSCP.used
of the set of inter-RAT
measurement
is the UE for
event
decided by
event reporting
UE
when
measurement
index
for CPICH
RSCP, used
quantity
is
Ec/No.
for indexingCPICH
the configuration
of
theparameter
set of inter-RAT
This
indicates the
measurement
parameters
for
UE period report
interevent
reporting
decided by
frequency
measurement
UE
when measurement
configuration
index for
quantity
is CPICH
RSCP.
CPICH Ec/No,
used
for
the set of inter-frequency
UE periodical reporting when
measurement quantity is
CPICH Ec/No.
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
connection
management
UTRAN Cell
connection
management
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
This
This parameter
parameter differentiate
indicates the
different
sets configuration
of handover
period report
parameter
according
to used
index for CPICH
RSCP,
UE Periodic
different
traffic
Taking
for indexing
thetype.
configuration
Measurement
account
of the setofofvarious
inter-frequency
Configuration Index for characteristic of service, it
CPICH RSCP
should
have
variouswhen
periodical
reporting
handover
parameters
measurement
quantitysuch
is
as
hysteresis,
absolute
CPICH
RSCP
Service and Bearer Type
threshold for 2b/2d etc...
Used for Differentiating
Altogether there are 9 sets of
Handover Configuration This parameter indicates the
configuration for different
configuration
index
of the
scenario based
on service
Inter-frequency
inter-frequency
measurement
type, transport channel type,
Measurement
parameters
based on traffic
single/multi RAB.
Configuration Index
type.
are several
WhenThere
the parameter
is 0xff, if
Related to Traffic
different
sets
of
the period
measurement
is
Category
measurement
values isn't
used, this configuration
according
to different
traffic
related to specfic
service
but
UE Inter-frequency
This
parameter
indicates
the
types.
all the service.
Event Measurement
UE CPICH Ec/No event
Configuration Index for report(2D/2F) configuration
CPICH Ec/No(GSM)
index for inter-Rat handover.
UE Inter-frequency
Event Measurement
CPICH RSCP(GSM)
UE Inter-frequency
Event Measurement
CPICH Ec/No(EUTRAN
FDD)
UE Inter-frequency
Event Measurement
CPICH RSCP(EUTRAN
FDD)
Handover Configuration
Intra-frequency
Measurement
Configuration Index
Related to Traffic
Category
Offset to the Normal
HCS Priority Level Used
for Cells Belonging to
the MBMS Preferred
Frequency Layer When
UE is in Low Mobility
State (HCS_OFFmbms)
Qoffmbms
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell
handover control

UE CPICH RSCP event
UTRAN Cell
report(2D/2F) configuration
index for inter-Rat handover.
handover control

UE
Ec/No
event
ThisCPICH
parameter
differentiate
report(2D/2F)
configuration
different sets of handover
index for inter-Rat
handover.
parameter
according
to
different traffic type. Taking
account
of various
This parameter
indicates the
characteristic
of service,
UE CPICH RSCP
event it
should
have various
report(2D/2F)
configuration
handover
parameters
such
index for inter-Rat
handover.
as report range for 1a/1b,
hysteresis for 1d, absolute
threshold for 1e/1f etc.
configuration
forindicates
different the
This parameter
scenario
based
on service
configuration
index
of the
type,
transport channel
type,
intra-frequency
measurement
single/multi
RAB.
parameters based on traffic
When
the parameter
is 0xff, if
type. There
are several
the
detected
set
different sets of
measurement values
or period
measurement
This
parameterisindicates
measurement
used,traffic
thisthe
according
to
different
HCS
priority
offset
added
to
configuration
isn't related to
types.
the
HCS
cells
belonging
to
specfic service but all the
the
MBMS preferred
service.
frequency layer when UE in
the
is in lowindicates
mobility the
Thiscell
parameter
state.
the additional offset added to
cells belonging to the MBMS
preferred frequency layer
when judging the cell-ranking
criterion R of cell reselection
for the non-HCS cell.
UTRAN Cell
handover control
UTRAN Cell
handover control
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell
MBMS
UTRAN Cell
MBMS
UE Event Report
Own System CPICH
Ec/No
UE Event Report
Own System CPICH
RSCP
Periodical Report
Own System CPICH
Ec/No
Periodical Report
Own System CPICH
RSCP
Handover Configuration
Inter-RAT Measurement
Configuration Index
Related to Traffic
Category
Cell Individual
Offset(dB)
DeltaQrxlevmin in
SIB11(dB)
DeltaQrxlevmin in SIB11
Configuration Tag
DeltaQrxlevmin in
SIB12(dB)
This parameter is the UE

index for CPICH Ec/No, used
measurement
is the UE for
event report
reporting
decided by
event
configuration
UE
when
measurement
index
for CPICH
RSCP, used
quantity
is
Ec/No.
for indexingCPICH
the configuration
measurement
is period for
event reporting
decided
byfor
report
configuration
index
UE
when
measurement
CPICH
Ec/No,
used for
quantity
CPICH
RSCP. of
indexing isthe
configuration
the set of inter-RAT
measurement
This
differentiate
This parameter
parameterparameters
is period for
periodical
reporting
when
different
sets
of handover
report
configuration
index for
measurement
quantity
parameter
according
toof own
CPICH RSCP,
used for
system
is
CPICH
Ec/No.
different
traffic
type.
Taking
account
various
the set ofofinter-RAT
characteristic
service, it for
measurement of
parameters
should
have
various
periodical reporting when
handover
parameters
measurement
quantitysuch
of own
as
hysteresis,
absolute
system
is CPICH
RSCP.
threshold for 3b/3b etc.
An
offset
is allocated
for the
This
parameter
configuration
forindicates
different
each
cell
being
monitored.
configuration
index
of
the
scenario based on service
The
offset
can
be
positive
or
inter-RAT
measurement
type, transport channel type,
negative.
Before
the
UE
parameters
based
on
traffic
single/multi RAB.
judges
whether
an event
type.
are several
WhenThere
the
parameter
is 0xff, if
occurs,
adds
the
different
sets
of offset toisthe
the period
measurement
measurement
result.
measurement
values If the
used, this configuration
isn't
PCPICH
uses
a positive
according
to
different
traffic
related to specfic
service
but
offset,
the UE sends the
types.
all the service.
measurement report just like
PCPICH is x dB better than
the actual case. Or, if the
PCPICH uses a negative
This
parameter
is the
offset,
the PCPICH
report is
Qrxlevmin
increment
limited. When the cellin
SIB11.
If present,
actual
individual
offset is the
used,
the
value
of Qrxlevmin
= possibly
corresponding
cell is
Qrxlevmin
+ DeltaQrxlevmin
(at least temporarily)
the
target cell of the handover or
removed
from the
active set.
This
parameter
indicates
whether DeltaQrxlevmin in
SIB11 is configured.
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
GSM
Handover Control
Neighboring Cell
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior

Idle Mode and
Qrxlevmin increment in
GSM
SIB12.If present, the actual
Common Channel
Neighboring Cell
value of Qrxlevmin =
Behavior

Configuration Tag
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
GSM Downlink Load

Threshold

GSM
downlink overload threshold
Handover Control
Neighboring Cell
in GSM system.

GSM Downlink RT Load downlink overload threshold GSM
Handover Control
Threshold
for RT service in GSM
Neighboring Cell
system.
GSM Uplink Load

Threshold

GSM
uplink overload threshold in
Handover Control
Neighboring Cell
GSM system.
GSM Uplink RT Load

Threshold

GSM
uplink overload threshold in
Handover Control
Neighboring Cell
GSM system.
HCS_PRIO
Qrxlevmin in
SIB11(dBm)
Qrxlevmin in
SIB12(dBm)
DeltaQrxlevmin in
SIB11(dB)

This
indicates
HCS parameter
priority level
(0-7) forthe
minimum
required
the GSM cells. 7 isreceived
the
power
of the
highestlevel
priority,
0 iscell
thewhich
satisfies
the
condition
of
lowest priority.
being selected or reselected
by UE.
When the
This
parameter
indicates the
measurement
quantity
is
minimum required
received
CPICH
RSCP,
only
the
power level of the cell which
measured
received
power
satisfies the
condition
of
level
of
the
cell
is
over
Qrxlevminimum
by UE. When thecan the cell
be selected. This
parameter
measurement
quantity
is
is
the Qrxlevminimum
CPICH
RSCP, only the
broadcast
SIB11. power
measured in
received
level of the cell is over
This
parameter is
thethe cell
Qrxlevminimum
can
Qrxlevmin
increment
in
be selected. This parameter
SIB11.
If present, the actual
is the Qrxlevminimum
value
of Qrxlevmin
broadcast
in SIB12.=
Qrxlevmin + DeltaQrxlevmin

Configuration Tag
DeltaQrxlevmin in
SIB12(dB)
Idle Mode and

GSM
Common Channel
Neighboring Cell Behavior /Handover
Control
Idle Mode and
GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior

Idle Mode and
Qrxlevmin increment in
External UTRAN
SIB12.If present, the actual
Common Channel
Cell
value of Qrxlevmin =
Behavior

Configuration Tag
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior
HCS_PRIO
Qqualmin in SIB11(dB)
Qqualmin in SIB12(dB)
Qrxlevmin in
SIB11(dBm)
Qrxlevmin in
SIB12(dBm)
UE State Indicator Used

for GSM Neighboring
Cell Configuration
Measurement Priority of
Neighboring GSM Cell
Penalty Time in SIB11

(Qhcs) of Neighbouring
Cell Broadcasted in
SIB11(dBm)
(Qhcs) of Neighbouring
Cell Broadcasted in
SIB12(dBm)

HCS
priority level
(0-7) forthe
This parameter
indicates
the
GSM
cells.
7
is
the
minimum required quality
highest
priority,
0
is
the
level of the cell which
lowest priority.
satisfies
the condition of
by
UE.
When the
This
parameter
indicates the
measurement
quantity
is
minimum required
quality
CPICH
Ec/No,
only
the
level of the cell which
measured
quality
of the
satisfies
the
condition
ofcell
is
overselected
Qqualmin
the cell
being
or can
reselected
be
selected.
parameter
This
parameter
indicates
the
by UE.
WhenThis
the
is
the
Qqualminimum
minimum
required
received
measurement quantity is
broadcast
inofSIB11.
power
the
CPICHlevel
Ec/No,
onlycell
thewhich
satisfies
the
condition
of
quality of the cell is over
being
selected or
reselected
Qqualminimum
can
the cell
by
WhenThis
the
be UE.
selected.
parameter
This
parameter
indicates
the
measurement
quantity
is
is the Qqualminimum
minimum
required
received
CPICH
RSCP,
only
thewhich
This
parameter
indicates
the
broadcast
inofSIB12.
power
level
the
cell
measured
received
power
status
of
the
GSM
satisfies the condition
of
level
the cell
is over
neighboring
cell.
beingofselected
or
reselected
Qrxlevminimum
cell
When
SIB11
is
to
bethe
sent,
by UE. When thecan
be selected.
parameter
the
cells that This
support
idle
measurement
quantity
is
is
the Qrxlevminimum
mode
are
selected
CPICH
RSCP,
only from
the the
broadcast
SIB11.
neighboring
cells
listpower
and are
measured in
received
filled
in SIB11;
level of
the cell is over
When
SIB12 is to
bethe
sent,
Qrxlevminimum
can
cell
the
cells
that
support
be selected. This parameter
connected
mode are
is the Qrxlevminimum
selected
the
broadcastfrom
in SIB12.
neighboring cells list and are
filled
in SIB12; indicates the
This parameter
When
the measurement
measurement
priority of the
control
message
is to highest
be
neighboring
cell. The
sent,
the
cells
that
support
This
parameter
indicates
the
priority is 0, the lowest priority
DCH
status
are
selected
from
effective
time
of
the
is 2.
the
neighboring
list and
neighboring
cell cells
temporary
are
filled
in
the
measurement
offset. The cell belongs to the
control
message.
HCS
structure.
This
parameter
is
required
when
the
queue
the
cells
in
the
cell
effective time of the
reselection
This
neighboringrule.
cell temporary
parameter
is
broadcast
offset. The cell belongs to
to UE
the
in SIB11.
HCS
structure. This
parameter is required when
queue
the selection
cells in the
cell
When cell
and
reselection
rule.
This
reselection is set to CPICH
parameter
broadcast to UE
RSCP, this is
parameter
in SIB12. the quality threshold
specifies
levels for applying prioritised
hierarchical
cell
reselection.
In the layered
cell
structure,
This
parameter
is
broadcasted
in SIB11.
quality threshold
level of the
neighboring cell when
performing the cell
reselection for CPICH RSCP.
This parameter is broadcast
to UE in SIB12.
Idle Mode and

External UTRAN Common Channel
Cell
Behavior /Handover
Control
Idle Mode and
External UTRAN
Common Channel
Cell
Behavior
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior
Idle Mode and

External UTRAN
Common Channel
Cell
Behavior
GSM
Handover Control
Neighboring Cell
Idle Mode and

GSM
Common Channel
Control
Idle Mode and
GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Quality Offset 1
(Qoffset1s, n) Between
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB11(dB)
Quality Offset 1
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB12(dB)
Temporary_offset1 in
SIB11
SIB12
Use of HCS in Cell

Reselection
Broadcast in either
SIB11 or SIB11bis
Filter Coefficient
Hysteresis(dB)
Inter-frequency
Measurement
Configuration Index
Function of
Configuration
Parameters
Inter-frequency Event
Identity

quality offset of the service
cell and neighboring cell
when the measurement
quantity is CPICH RSCP.
This parameter is required
This
indicates
the
whenparameter
queues cells
in the cell
quality
offsetrule.
of the
service
reselection
This
cell
and neighboring
celltofor
parameter
is broadcast
UE
CPICH
RSCP.
This
in SIB11.
queue
the cells in
the cellthe
This parameter
indicates
reselectionoffset
rule. This
temporary
for CPICH
parameter
broadcast
RSCP. Theiscell
belongs to
to UE
in
SIB12.
the
structure.
This the
ThisHCS
parameter
indicates
parameter
is required
filtering
factor
that UE when
This
parameter
indicates
the
queue
thethe
cells
the cellon
performs
L3in
filtering
temporary
offset
of
the
reselection
rule. This
the
measurement
results of
neighboring
for CPICH
parameter
iscell
broadcast
to UE
the inter-frequency
RSCP.
The
cell
belongs
to
in
SIB11.
measurement.
the
HCS
structure.
This
UE executes inter-frequency
parameter
is required
measurement
on L1 inwhen
the
queue
the
cells
in theseveral
cell
fixed cycle (measure
reselection
rule.
This
points in one
measurement
parameter
is
broadcast
This parameter
indicates
cycle
and L1 filters
the to UE
in
SIB12.
whether
the
HCS
is
used
measurement results.
Thisor
not.
method can be decided by
UE freely). Then L1 reports
to L3 at intervals and L3
filters
the latest indicates
This parameter
measurement
results
whether the cell
will beand the
measurement
results
broadcast in SIB11
or saved
previously.
SIB11bis. The filtering shall
This
parameteraccording
indicatestothe
be performed
hysteresis
used
when judging
the following
formula
whether
tointrigger
described
3GPPthe
TSevent.
This
parameter
makes
25.331: "RRC Protocol it
different
between
status
Specification":
Fn the
=(1-a)*Fnto
trigger
an
event
and
1 +a*Mn , a = 1/2^(k/2) the
.
status
to leave
thefiltered
event, so
Fn is the
updated
as
toparameter
avoid theresult
trigger
status
measurement
This
indicates
the
change
dueprevious
toindex
very of
small
Fn-1 is the
filtered
configuration
the
change.
Different
events are
measurement
result
inter-frequency
measurement
configured
separately
and to
Mn is the latest
received
parameters,
which
is used
can
be
configured
with
measurement
result
different
values.
a
= 1/2^(k/2),
where
value
configuration
sets
forthe
interMAX_INTEREAS_EVENT
of k is the Filter
Coefficient.is
frequency
measurement.
the
maximum
number
of will
NOTE:
if kseveral
is set
todifferent
0 that
There
are
inter-frequecy
measument
meanofno
layer 3 filtering.
sets
measurement
values
event
which
6. of
Thisthe
formula
that
for
sameisindicates
set
This
parameter
indicates
the
the
smaller
the
value
oftothe
parameters
according
purpose
and
functions
of
the
filtering
factor
is,
the
larger
specific measurement
set
of
inter-frequency
effect
the
current
purpose,
measurement
measurement
result
will
have
quantity
and soconfiguration
on.the
event triggered
by
interparameters.
on the measurement
result
frequency
measurement,
reported
to RNCto(periodical
which
is related
the
report)
or the judgment
measurement
quantity.
(event
report).
MAX_INTER_MEAS_EVENT
indicates the maximum
number of inter-frequency
measurement event, which is
6.
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and

GSM
Common Channel
Neighboring Cell
Behavior
Idle Mode and
GSM
Common Channel
Control
Idle Mode and
GSM
Common Channel
Control
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
Event Number of Interfrequency Measurement
Amount of Reporting in
Reporting Criteria
Absolute Threshold of
the Quality of the Nonused Frequency for
2B/2C/2E(CPICH
RSCP: dBm, CPICH
Ec/No:
dB)
Absolute
Threshold of
the Quality of the
Currently Used
Frequency for
2B/2D/2F(CPICH RSCP:
dBm, CPICH Ec/No: dB)
Time To Trigger
Weight of the Non-used

Frequency for
2A/2B/2C/2E
Weight of the Currently

Used Frequency for
2A/2B/2D/2F
Load Balance Switch of

Call Holding Procedure
This parameter indicates how

many events are required to
be configured for the set of
the measurement
parameters
for aindicates
certain the
This
parameter
purpose.
The of
defined
event
report
criteria
the internumber is measurement.
related to the
frequency
judgment
method
of interWhen different
report
criteria
This
parameter
indicates
the
frequency
handover.
is selected, parameters for
measurement
quantity
for
this measurement purposethe
is
inter-frequency
configured differently.
measurement.
This parameter
indicates
the
When
'Periodical
Reporting
times of is
the
periodical
Criteria'
selected,
two sets
reports
to be reported. If the
of
the measurement
UE
detects that
the timestoof
parameters
are required
event
reports
exceeds
be configured. One setthe
of the
value of Amount
of reporting,
periodical
parameters
are
UE
reporting
thethe the
configured
to UEindicates
and
Thisstops
parameter
measurement
results.
other
set
of
inter-frequency
intervals of periodical
event
parameters
are
reporting.
For the periodical
configured
to SRNC
event
report, the UE
reportsforthe
judgment.
Having
received
measurement
results
on this
the
periodical measurement
parameter.
reports from UE, SRNC
judges which event is
triggered
according
to thethe
This parameter
indicates
event
criteria
parameters
absolute threshold that is and
then decides
to for
required
to bewhether
configured
perform
the inter-frequency
event 2b/2c/2e
(used when
handover
thenot
judging theaccording
quality oftothe
This
parameter
indicates
event.
used
frequency).indicates the
This
parameter
the
time
difference
betweenEvent
When
'Intra-frequency
MAX_INTEREAS_EVENT
is
absolute
threshold
that
is
having
detected
the
event
Reporting
Criteria'
is of
the maximum
number
required
to
be
configured
for
generation
reporting
the
selected,
a and
setmeasument
of
parameters
inter-frequecy
event
2b/2d/2f
(used
when
event.
Only
when
the
event
of
the
corresponding
intraevent
which
is 6. of the
judging
themeasurement
quality
generation
is
detected and
frequency
currently
still
meetsused
all requirements
of
configuration
IDfrequency.
are
MAX_INTEREAS_EVENT
event
triggering
after Time is
to
configured
to UE.
the
maximum
number
of
trigger,
thevalue
event
be
When
the
iscan
'Interinter-frequecy
measument
triggered
reported.
The
frequencyand
Event
Reporting
event
which
is
larger
thethe
value
Criteria',
set6.is,
of the stricter
This
parameter
is
when
the
judgment
forused
the event
parameters
ofisthe
judging
the
quality
of
the
cells
to
be triggered.interThe
corresponding
of
not
used
frequencies.
This
parameter
should
be
set
frequency measurement
parameter
indicates
the
according
to
the
actual
configuration
ID are
weight
of the
cell infor
theif
requirements.
Sometimes,
configured
to best
UE.
This
parameter
is used
quality
for
it is set judgment
too large,(only
thethe
quality
quality
judgment
for
event
of calls2a/2b/2c/2e).
may
decrease.
carrier
of
currently
used
MAX_INTEREAS_EVENT
MAX_INTEREAS_EVENT
is
frequency,
which indicates is
the
number
of
the maximum
maximum
number
of in
weight of the
best cell
inter-frequecy
measument
inter-frequecy
measument
the quality judgment
and is
event
6.
event which
which
ismeasurement
6.
related
to theis
quantity
and theisevent
type
This parameter
a load
(only
for
event
2a/2b/2d/2f).
balance switch which
MAX_INTEREAS_EVENT
is
indicates whether load
the
maximum
number
of
balance function is supported
inter-frequecy
for
call holdingmeasument
procedure.
event
which is 6.scenes are
The application
including handover,
relocation, RAB reestablishment and FACH>DCH.
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell
Load Balance
This parameter is a service

indicates whether load
Service Balance Switch
for call holding procedure.
of Call Holding
The application scenes are
Procedure
including handover,
relocation,
RAB is
re-a CS
This parameter
establishment
and
FACHbalance
switch which
This
parameter
indicates the
CS Balance Switch of
>DCH.
indicates
whether
the
downlink available
RAB Assignment
balance
function
is supported
channelization
code
load
Procedure
for
CS
service
during
RAB
balance threshold of CS
assignment
procedure.
service. If the local UTRAN
UTRAN Downlink
cell'sparameter
downlink available
This
indicates the
Available Load Balance channelization
code usage
downlink available
Threshold (Code) for
ratio
is less than
the load
channelization
code
CS(%)
threshold
indicated
thisPS
balance threshold ofbyR99
parameter,
the
downlink
load
service. If the local UTRAN
balance
judgment
is
UTRAN Downlink
cell's downlink available
performed and code
someusage
UEs
Available Load Balance channelization
may
balanced
to other
Threshold (Code) for
ratio be
is less
than the
inter-frequency
UTRAN
cell.
R99 PS(%)
threshold indicated
by this
This
parameter
indicates
the
parameter, the downlink load
weight
of
HSDPA
throughput.
balance judgment is
HSDPA Throughput
For
HSDPA,
when
evaluating
performed
and
some
UEs
Weight for Load
the
several
factors
maycell
be load,
balanced
to other
Balance(%)
such
as uplink RTWP
and
inter-frequency
UTRAN
cell.
HSDPA throughput are taken
into
for is
load
balance.
Thisaccount
parameter
a switch
indicating whether load
Load Balance Switch for
balance based on downlink
Downlink Power
This
parameter
indicates
the
transmitting
power
is
weight
of
downlink
supported or not.
transmitting power. When
evaluating
the cell
load, the
This
parameter
indicates
Downlink Power Weight several
such
as
downlinkfactors
available
HSDPA
for Load Balance(%)
downlink
channellization
throughput threshold for load
code,
downlink
transmitting
balance
between
UTRAN
power,
uplink
RTWP
cells. If the downlink are
UTRAN Downlink
taken
intoHSDPA
accountthroughput
for load
available
Available Load Balance This
balance.
parameter
of
local
UTRAN indicates
cell is lessthe
Threshold (HSDPA
downlink
available indicated
load
than the threshold
Throughput) for
threshold
of CS service
by this parameter,
the for
HSDPA(%)
load
balance
downlink
loadbetween
balance
UTRAN
cells.
If the downlink
judgment
is
performed
and
UTRAN Downlink
available
load
local
UE inparameter
local
cellofmay
be the
indicates
UTRAN
is lessinterthan the
balanced
to other
downlinkcell
available
load
Threshold (Power) for
threshold
indicated
by this
frequency
UTRAN
cell.
threshold of CS service
for
CS(%)
parameter,
thebetween
downlink
load
load balance
RAT
balance
judgment
is
systems. If the downlink
Inter-RAT Downlink
performed
andofUE
in local
available
load
local
parameter
indicates
the
cell
may
be
balanced
to the
other
UTRAN
cell
is less load
than
downlink
available
inter-frequency
UTRANthis
cell.
threshold
threshold indicated
of R99 PSbyservice
CS(%)
parameter,
the
downlink
for load balance betweenload
balance
judgment
UTRAN cells.
If theisdownlink
UTRAN Downlink
performed
and
in local
available load ofUE
local
Available Load Balance cell may be balanced to other
UTRAN is less than the
RAT
systems.
threshold
indicated by this
R99 PS(%)
parameter, the downlink load
balance judgment is
performed and UE in local
cell may be balanced to other
inter-frequency UTRAN cell.
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
Permitted Payload
Difference Downlink
Available Load
Threshold in Interfrequency Cells (Code)
(%)
Permitted Payload
Difference Downlink
Available Load
Threshold in Interfrequency Cells (HSDPA
Throughput)(%)
Permitted Payload
Difference Downlink
Available Load
Threshold in Interfrequency Cells (Power)
(%)
Permitted Payload
Difference Uplink
Available Load
Threshold in Interfrequency Cells
(Interference)(%)
Initial RRC Procedure

of Initial RRC Procedure

Code
Code Weight for Load

Balance(%)

HSPA Throughput

RAB Assignment
Procedure

of RAB Assignment
Procedure

downlink channellization
code threshold for load
balance between interfrequency cells.It is Delta
threshold
of code
between
This
parameter
indicates
target
and
source cell.
HSDPA
throughput
threshold
for load balance between
inter-frequency cells.It is
Delta threshold of HSDPA
throughput
between
targetthe
This
parameter
indicates
and
source
cell.
downlink
TCP
load difference
threshold between interfrequency cells. It is Delta
threshold of TCP load
between
target and
source
This
parameter
indicates
the
cell.
uplink RTWP load difference
threshold between interfrequency cells. It is Delta
threshold of uplink RTWP
load between
target
and
This
parameter
is a load
source
balancecell.
switch which
indicates whether the RRC
load balance function is
supported for initial RRC
procedure
used isfora service
This
parameter
accessing.
indicates whether the RRC
service balance function is
supported for initial RRC
procedure used for
accessing.
indicating whether load
balance based on downlink
This
parameter code
indicates the
channellization
weight
of
downlink
resource is supported or not.
channellization code. When
evaluating the cell load,
several factors such as
downlink channellization
code, downlink transmitting
power, uplink RTWP are
This
is afor
switch
takenparameter
into account
load
indicating
whether
load
balance.
balance based on HSPA
throughput is supported or
not.
This parameter is a load
indicates whether the load
for RAB assignment
procedure.
This parameter is a service
indicates whether the load
service function is supported
for RAB assignment
procedure.
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
/Connection
Management
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance

Load Balance Switch for indicating whether load
Uplink Interference
balance based on uplink
This
parameter
indicates
the
RTWP
is supported
or not.
weight of uplink RTWP.
When evaluating the cell
Uplink Interference
load,
several factors
suchthe
as
This parameter
indicates
Weight for Load
downlink
channellization
uplink available load
Balance(%)
code,
downlink
threshold
of CStransmitting
service for
power,
uplink between
RTWP and
load
balance
HSDPA
taken
UTRAN throughput
cells. If the are
uplink
into
account
for
load
balance.
UTRAN Uplink Available available load of local
parameter
indicates
the
Load Balance Threshold This
UTRAN
cell is less
than the
uplink
available
load
(Interference) for CS(%) threshold indicated by this
threshold
CSuplink
service
for
parameter,ofthe
load
load
balance
between
balance
judgment
is
different RAT
If the
andsystems.
UE in local
UTRAN Uplink Available performed
This
parameter
indicates
the
uplink
available
load oftolocal
cell
may
be
balanced
other
Load Balance Threshold uplink available load
cell
is
less
than
the
threshold
UTRAN cell.
(Interference) for CS(%) inter-frequency
threshold
of R99
PS service
indicated by
this parameter,
for
load balance
between
performs
the uplink
load
UTRAN
cells.
If theand
uplink
balance
judgment
UE of
UTRAN Uplink Available
avaiable load of local UTRAn
Load Balance Threshold local cell may be balanced to
cell
is RAT
less systems.
than the threshold
other
(Interference) for R99
indicated
by
thisindicates
parameter,
This parameter
PS(%)
the uplink of
load
threshold
DCbalance
redirection
judgment
is performed
and
strategy. When
measurement
UE
in
local
cell
may
be
Cpich EcNo Threshold quantity in IE "Measured
other interfor Dual Carrier HSDPA balanced
results onto
RACH"
is CPich
frequency
UTRAN
cells.
Balance(dB)
EcNo,
if
current
Cpich
EcNo
quality is higher
the
threshold
of DC than
redirection
threshold,
the DC
redirection
strategy. When
measurement
strategy
will
be
triggered.
Cpich RSCP Threshold quantity in IE "Measured
for Dual Carrier HSDPA results
on RACH"
is CPich
This parameter
indicates
Balance(dB)
RSCP,
if
current
Cpich
RSCP
whether HSPA+ capability
quality isduring
highercall
than
the
balance
holding
threshold,
redirection
procedure the
will DC
be taken
strategy
will
be
triggered.
HSPA+ Balance Switch account.Each bit indicates
of Call Holding
whether the balance of
Procedure
corresponding HSPA+
This
parameter
indicates the
capability
is used.
priority
of HSPA+ capability
Max_HSPA_PLUS_CAP
and
each the
bit indicates
indicates
maximumone
priority
ofofcorresponding
number
HSPA+
cpability
HSPA+ Balance Priority
HSPA+ capability.
Max_HSPA_PLUS_CAP
indicates
the maximum
This parameter
indicates
number
of
HSPA+and
cpability
HSPA+ capability
each
HSPA+ Capability
bit indicates one capability.
This
parameter indicates
Indicator
Max_HSPA_PLUS_CAP
whether
capability
indicatesHSPA+
the maximum
balance
during
RAB
number of
HSPA+
cpability
assignment procedure will be
HSPA+ Balance Switch taken account.Each bit
of RAB Assignment
indicates whether the
Procedure
balance of corresponding
HSPA+ capability is used.
Max_HSPA_PLUS_CAP
indicates the maximum
number of HSPA+ cpability
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
load balance
UTRAN Cell
load balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
This parameter is switch

which indicates whether the
Dual Carrier Balance
dual carrier balance function
Switch of Initial RRC
is supported for initial RRC
Procedure
procedure used for
accessing.
EUTRAN Allowed
maximum
allowed
The parameter
indicates the
Measurement
measurement
bandwidth
on
downlink
E-UTRAN
Absolute
Bandwidth
a
carrier
frequency.
Radio Frequency Channel
Number (EARFCN).F_DL =
Downlink EUTRAN
F_DL_low
+ 0.1indicates
* (N_DL the
This
parameter
Absolute Radio
N_Offs-Dl),
F_DL is
threshold forwhere
cell reselection
Frequency Channel
center
carrier
frequency,
to a higher priority EUTRAN
Number
F_DL_low
dl 2lowest
carrier
cell. There is
are
reselection
frequency,
N_DL
is
criteria: (1)
DlEARFCN,
N_Offs-Dl xisof a
Reselection Threshold
SrxlevnonServingCell,
carrier priority
frequency
offset cell
for Inter-RAT Layers of higher
EUTRAN
indicated
band indicator.
High Priority in
is greater by
than
EUTRAN(dB)
EutranHighThresh during a
This
parameter
indicates the
time interval
Treselection
(2)
threshold
for
cell
reselection
more than 1 second
has
to
a lower
priority
EUTRAN
This
parameter
indicates
the
elapsed
since
the
UE
Number of EUTRAN
cell.
There
are
3
reselection
number
of
EUTRA
centre
camped
on
the
current
Centre Frequencies
criteria
(1) No cell of a
frequencies
serving :cell.
higher priority frequency or
inter-RAT fulfills the criteria
above (2) SrxlevServingCell
for Inter-RAT Layers of < Threshserving, low and the
Low Priority in
SrxlevnonServingCell, x of a
EUTRAN(dB)
lower priority EUTRAN cell is
greater than
EutranLowThresh
during a
This parameter
parameter indicates
indicates
the
This
the
time interval
Treselection
(3)
Absolute Priority of Inter- absolute
reselection
priority
threshold
for
cell
reselection
than 1
second
has
RAT Layers in EUTRAN more
of
inter-rat
layers
in
to
a higher
priority
GERAN
elapsed
since
the UE
EUTRAN.
cell.
There
are
2
reselection
This parameter
indicates the
camped
on the current
criteria:
(1)for cell reselection
threshold
serving cell.
x of a
to
a lower priority GERAN
for Inter-RAT Layers of higher
priority
cell is
celll. There
areGERAN
3 reselection
High Priority in
greater
than
criteria : (1) No cell of a
GERAN(dB)
GeranHighThresh
duringor
a
higher priority frequency
time
interval
Treselection
(2)
inter-RAT fulfills the criteria
more
than
1
second
has
above (2) SrxlevServingCell
elapsed
since thelow
UEand the
for Inter-RAT Layers of <
Threshserving,
camped
on the current x of a
Low Priority in
serving
cell. GERAN cell is
GERAN(dB)
lower priority
greater than
GeranLowThresh during a
Absolute Priority of Inter- time interval Treselection (3)
absolute reselection priority
RAT Layers in GERAN more than 1 second has
of
inter-rat
layers
GERAN.
elapsed
since
theinUE
camped on the current
serving cell.
which frequency band the
Gsm Band Indicator
BCCH ARFCN GSM cell
uses.
UTRAN Cell
load balance
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
Number of GSM
Frequency Groups

number of GSM frequency
UTRAN Cell
groups

minimum required quality
Qqualmin of UTRAN for level of the cell of UTRAN
Cell Reselection(dB)
cell which satisfies the
condition of being reselected
by UE.
Qrxlevmin of EUTRAN minimum required received
for Cell
power level of EUTRAN cell
Reselection(dBm)
which satisfies the condition
of being reselected by UE.
minimum required received
Qrxlevmin of UTRAN for
power level of UTRAN cell
Cell Reselection(dBm)
minimum required received
Qrxlevmin of GSM for
power level of GERAN cell
Cell Reselection(dBm)
Absolute Priority of
Serving Cell for Cell
Reselection

absolute reselection priority
This
parameter
of serving
cell. is used in the
measurement rules for cell
re-selection when absolute
CPICH RSCP
priorities are used. It
Measurement Trigger
specifies the value of Srxlev
Threshold for Absolute
in
theparameter
serving cell
This
is controlling
used in the
Priority Reselection
the
rate
of
inter-frequency
measurement
rules
for cell
Criteria(dB)
and
inter-RAT
re-selection
when absolute
CPICH EcN0
measurements.If
priorities are used. It
Measurement Trigger
SrxlevServingCell
specifies
the value>ofSpriori
Squal
Threshold for Absolute
in the serving cell controlling
the rate of inter-frequency
Criteria(dB)
and inter-RAT
measurements.If
SrxlevServingCell
> Spriorit
Starting
absolute radio
GSM Starting ARFCN
frequency channel No. of
This
is used in the
GSMparameter
cell.
rules for cell reselection
when absolute priorities are
Serving Cell Reselection This parameter indicates the
used. It specifies the limit for
Threshold for Absolute threshold for cell reselection
Srxlev in the serving cell
to
a higher
below
whichpriority
the UEUTRAN
may
Criteria(dB)
cell.
There
2 reselection
perform
cellare
reselection
to a
criteria:
(1)
inter-frequency
cell on an
of a
equal or lower absolutex prior
for Inter-Frequency
higher priority UTRAN cell is
Layers of High Priority in greater than
UTRAN(dB)
UtranHighThresh during a
time interval Treselection (2)
more than 1 second has
elapsed since the UE
camped on the current
serving cell.
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
Number of UTRAN
Centre Frequencies
for Inter-Frequency
Layers of Low Priority in
UTRAN(dB)
Absolute Priority of InterFrequency Layers in
UTRAN
UTRAN UARFCN of the

downlink carrier
frequency
Inter-RAT Event Identity
Event Number
UTRAN Filter Coefficient
GSM Filter Coefficient
EUTRAN Filter
Coefficient
Hysteresis(dB)
Configuration Index

threshold for cell reselection
to a equal or lower priority
This
parameter
indicates
UTRAN
cell. There
are 3 the
number
of
EUTRA
centre
reselection criteria : (1) No
frequencies
cell of a higher priority
frequency or inter-RAT fulfills
the criteria above (2)
SrxlevServingCell <
Threshserving, low_ and the
SrxlevnonServingCell, x of a
equal or lower priority
UTRAN cell is greater than
This
parameter indicates
UtranLowThresh
during athe
This
parameter
indicates
the
absolute
reselection
priority
time interval
Treselection
(3)
filtering
factor that layers
UE in
of
inter-frequency
more than 1 second has
performs
the L3 filtering on
UTRAN
elapsed
since the
UE
This
parameter
indicates
the measurement
results the
of
camped
on
the current
occupied
downlink
the intra-frequency carrier
serving
cell.
central
frequency
point of the
measurement.
cell.
It
is
UTRA
absolute
radio
UE
executes
intra-frequency
This
parameter
indicates
the
frequency
channel
No.,
measurement
L1
the
event
triggeredon
bythe
thein
intercorresponding
to
central
fixed
cycle (measure
several
UE
executes
inter-RAT
RAT
measurement,
which
is
frequency
of the
carrier
used
points
in
one
measurement
measurement
on
L1
in
the
related
to
the
measurement
by
theand
downlink
channel.
cycle
filters
the
fixed
cycleL1
(measure
several
quantity.
measurement
results.
This
points
in one measurement
MAX_RAT_MEAS_EVENT
method
can
be
decided
by
cycle
and
L1
filters
the
indicates
the maximum
Thisfreely).
parameter
indicates
how
UE
Then
L1
reports
measurement
results.
This
number
of inter-RAT
UE
executes
inter-RAT
many
events
are
required
to
to
L3
at
intervals
and
L3
method
can befor
decided
by
measurement
event,
which
is
measurement
on
L1
in
the
be
configured
the
set
of
filters
the latest
UE
freely).
Then
L1
reports
4.
fixed
cycle (measure
several
the
measurement
measurement
results
and the
to
L3 atinintervals
and
L3
points
one
measurement
parameters
for
a
certain
measurement
results
saved
filters
the The
latest
cycle
and
L1
filters
theevent
purpose.
defined
previously.
The
filtering
shall
measurement
results
and
the
measurement
results.
This
number
is related
to the
be
performed
according
to
measurement
results
saved
method
can
be
decided
by
judgment
method
of interthe
following
formula
previously.
The
filtering
shall
UE
freely).
Then
L1
reports
RAT
handover.
described
in 3GPP
TS
be
performed
according
to
L3
at intervals
and L3 to
25.331:
"RRC
Protocol
the
following
formula
filters
the latest
Specification":
Fn=(1-a)*Fndescribed in 3GPP
TSand the
measurement
results
1+a*Mn
,
a
=
1/2^(k/2)
. the
25.331:
"RRC
Protocol
This
parameterresults
indicates
measurement
saved
Fn
is the updated
filtered
Specification":
Fn
=(1-a)*Fnhysteresis
used
when
judging
previously.
Theresult
filtering shall
measurement
1
+a*Mn
, atrigger
= according
1/2^(k/2)
. to
whether
to
the event.
be
performed
Fn-1
is
the
previous
filtered
Fn
is
the
updated
filtered
This
parameter
makes
it
the
following formula
measurement
result
measurement
result
different
between
the
described
in 3GPP
TSstatus
Mn
is
the
latest
received
Fn-1
is
the
previous
filtered
to
trigger"RRC
an event
and
the
25.331:
Protocol
measurement
result
measurement
result
status
to leave Fn
the=(1-a)*Fnevent, so
Specification":
a
=to
1/2^(k/2),
where
the
value
Mn
is
the, latest
received
as
avoid
trigger
status
1
+a*Mn
athe
= 1/2^(k/2)
.
of
k
is
the
Filter
Coefficient.
measurement
change
to result
veryfiltered
small
Fn
is theifdue
updated
NOTE:
k is set
to 0the
thatvalue
will
a
=
1/2^(k/2),
where
change.
measurement
result
mean
no
layer
3
filtering.
of k is
Coefficient.
The
larger
the
value
is, the
Fn-1
isthe
theFilter
previous
filtered
This
formula
thatwill
NOTE:
if kdifference
is indicates
set
to 0between
that
larger
the
measurement
result
the
smaller
the
value
of
the
mean
no
layer
3
filtering.
the
status
to trigger
the event
Mn
is
the
latest
received
This
parameter
indicates
the
filtering
factor
is,
the
larger
This
formula
that
and
the
statusindicates
to leave
the
measurement
result
configuration
index
of
the
effect
the be.
current
the
thewhere
valuethe
of the
event
will
a
= smaller
1/2^(k/2),
value
inter-RAT
measurement
measurement
result
will
have
filtering
factor
is,
the
larger
This
parameter
is
related
toto
of
k
is
the
Filter
Coefficient.
parameters,
which
is
used
on
the
measurement
result
effect
the
current
the
measurement
quantity
NOTE:
if
k
is
set
to
0
that
will
index
different
parameter
reported
to RNC
(periodical
measurement
result
will
have
and
the
event
type.
mean
no
layer
3
filtering.
configuration
for interreport)
orevents
the sets
judgment
on
the
measurement
result
Different
are There
This
formula
indicates
that
RAT
measurement.
(event
report).
reported
to
RNC
(periodical
configured
separately
and
the smaller
valuesets
of
the
are
several the
different
of
report)
the judgment
can
be or
configured
with
filtering
factor
is,
the
larger
measurement
values
for the
(event
report).
different
hysteresis
effect the
current
same
set
of
parameters
MAX_RAT_MEAS_EVENT
is
measurement
result will have
according to specific
the
maximum
number
of
on
the
measurement
result
inter-RAT
reported tomeasurement
RNC
(periodical
measurement
quantity
and
events
the value
report)
or the takes
judgment
so
on. which
of
4. report).
(event
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
Function of
Configuration
Parameters

purpose and functions of the
UTRAN Cell and
set of inter-RAT
Handover Control
Service Related
parameters.

measurement quantity of the
inter-RAT
measurement
This parameter
indicatesthat
the
UE
performs.
This parameter
indicates
the
report
rules of the
inter-RAT
times of the periodical
measurement.
When the
reportsisto
be reported.
If the
value
Periodical
Reporting
Amount of Reporting in UE
detects
Criteria,
twothat
setsthe
of times
the of
event
reports exceeds
the
measurement
parameters
value
of Amount
reporting,
are
required
to beofconfigured.
UE stops
the
One
set ofreporting
the periodical
measurement
results.
parameters
are
configured
to
UE
and of
theperiodical
other setreporting
of event
interval
parameters
are configured
to
when such reporting
is
SRNC
forperiodically.
event judgment.
triggered
When receiving the
periodical measurement
This
parameter
reports
from UE,indicates
SRNC the
This
parameter
indicates
absolute
threshold
Report Criteria
judges which eventof
is the the
absolute
threshold
used
UTRAN
cell
quality
that
UE
triggered according to the
when
judging
the
quality
of
uses
to
judge
event
3a.
The
event criteria parameters,
other
RAT
configured
for
range
anddecides
unit of the
and then
whether to
event
3a/3b/3c.
The
value
parameter
relate
to the
perform
the
software
This
parameter
indicates
range
and
unit
of
this
measurement
quantity
of the
handover
according
to the
the Quality of UTRAN
time
difference
between
parameter
are related
to
the
UTRAN
system.
triggered
event.
When
the
Cell for 3A
having
detected
the event
measurement
quantity
of
MAX_RAT_MEAS_EVENT
is
value
is Event
Reporting
generation
andat
reporting
the
other
system,
present
the
the
maximum
number
ofthe
Criteria,
only
one
set
of
event.
Only
when
the event
measurement
quantity
canis
inter-RAT
measurement
measurement
parameters
generation
is
detected
and
only
be
GSM
Carrier
RSSI
events
which
takes
the value
required
toall
berequirements
configured
toof
meets
of
the Quality of Other RAT still
the
GSM
system,
which
of
4.
UE.
SRNC
decides
whether
event
triggering
after
Time
to
for 3A/3B/3C
corresponds
tointer-RAT
the CPICH
to
perform
the
trigger,
the
event
can
be so
RSCP
of
UTRAN
system,
handover
according
to the
triggered
and
reported.
The
the
value
range
and
unit
of
measurement
larger
the valueresults
is, the stricter
this
parameter
correspond
to
reported
by UE.
This
parameter
when
the
judgment
is is
forused
the event
the
CPICH
RSCP.
Time To Trigger
judging
the quality
to
be triggered.
Theof the is
MAX_RAT_MEAS_EVENT
UTRAN
system
in be
inter-RAT
parameter
should
set
the maximum number
of
measurement,
according
to thewhich
actual
indicates
the weight
of the
requirements.
Sometimes,
if
events which
takes
the
value
best
cell
in
the
quality
itofis4.set too large, the quality
Weight of the UTRAN
judgment
(only
for event 3a).
of calls may
decrease.
System for 3A
MAX_RAT_MEAS_EVENT
MAX_RAT_MEAS_EVENT is
is
the
the maximum
maximum number
number of
of
inter-RAT
measurement
events
which
the
events
which takes
takes
the value
value
This
parameter
indicates
AMR Inter Frequency
of
4.
of 4.
whether
AMR inter-frequency
Handover Switch
handover allowed or not
UTRAN Measurement
Quantity

AMR Inter Rat Handover
whether AMR inter-Rat
Switch
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related

HSDPA Inter Frequency whether HSDPA interHandover Switch
frequency handover allowed
or not
HSDPA Inter Rat

Handover Switch

whether HSDPA inter-Rat

HSUPA Inter Frequency whether HSUPA interHandover Switch
or not
HSUPA Inter Rat

Handover Switch

whether HSUPA inter-Rat
R99 NRT Inter

Frequency Handover
Switch

whether R99 NRT interfrequency handover allowed
or not
R99 NRT Inter Rat

Handover Switch

whether R99 NRT inter-Rat

R99 RT Inter Frequency whether R99 RT interHandover Switch
or not
whether R99 RT inter-Rat
handover
allowed
or not DC
This parameter
indicates
redirection strategy switch.
When the switch is "On", if
UE supports DC and the
Dual Carrier Redirection
access cell don't support DC,
Strategy Switch
RNC will redirect UE to other
frequency with DC capability
When
from UMTS
via thehandover
RRC Connection
to
GSMprocedure.
is failled, the timer is
Reject
Handover to GSM
initialization, and RNC will
Penalty Timer(s)
not handle inter-Rat
measurement report until the
This
timerparameter
is expiry. indicates the
service handover
combination criteria in multiCombination Strategy
RAB, and RNC will perform
related process according to
the highest priority value of
IE"service handover"
R99 RT Inter Rat
Handover Switch
RNC
load balance
Service Handover
Strategy of RNC for
AMR
Compressed Mode
Configuration Strategy
Service Handover
Strategy of RNC for
CS64
Service Handover
Strategy of RNC for PS
NRT Service
Service Handover
Strategy of RNC for PS
RT Service
Service Handover
Strategy Indicator
Timer for Stopping Interfrequency Measurement

and Activating Inter-RAT
Measurement(s)
UE Inter-frequency FDD
Measurement Indicator
UE Inter-System
Broadcast in SIB11 or
SIB12
Absolute Priority
Reselection Criteria
Switch

service handover strategy
controlled by RNC. If
ServHoInd Bit0 sets as
"Ignore service handover IE",
RNC will ignore "service
handover" IE in requested
RAB, and perform strategy
based on AmrServHoStra; If
ServHoInd Bit0 sets as
"Apply service handover IE"
This
parameter
indicates
This
parameter
indicatesisthe
and "service
handover"
not
service
handover
strategy
whether
and
included inter-frequency
in requested
RAB,
controlled
by RNC.
If mode
inter-rat
RNC willcompressed
also
perform
ServHoInd
Bit1
sets
as
will
be
configured
to
strategy based on UE
"Ignore
service
handover
IE",
simultaneously
or
not,
when
AmrServHoStra, otherwise
RNC
will
ignore
"service
inter-frequency
cells
and
This
parameter
indicates
the
RNC will perform strategy
handover"
in requested
inter-rat
neighboring
service
strategy
base onhandover
theIEvalue
of cells
"service
RAB,
and
perform
exist.
controlled
If
handover" by
IE.RNC.strategy
based
on Cs64ServHoStra;
If
ServHoInd
Bit2 sets as
ServHoInd
Bit1
sets
as
"Apply
service
RNCparameter
will
ignorehandover
"service IE"
This
indicates
and "service
handover"
isthe
not
handover"
IE
in
requested
service
handover
strategy
included
inperform
requested
RAB,
RAB,
and
strategy
controlled
by RNC.
If
RNC
will
perform
based
onalso
PsRtServHoStra;
If
ServHoInd
Bit3
sets
as
strategy
based
on
ServHoInd
Bit2
sets
as
This
parameter
indicates
the
"Ignore
service handover
IE",
Cs64ServHoStra,
otherwise
"Apply
service
handover
IE"
service
handover
strategy
RNC
will
ignore
"service
RNC
will perform
strategy
and "service
handover"
is not
controlled
by
RNC.
Bit0-Bit3
handover"
IEvalue
in requested
base
on
the
ofof"service
included
in
requested
RAB,
indicates
strategery
AMR
RAB,
and
perform
strategy
handover"
IE. perform
RNC
also
service,
service, PS RT
basedwill
onCS64
PsNrtServHoStra;
strategy
based
on
service
and
PS
NRT
If ServHoInd Bit3
setsservice,
as
PsRtServHoStra,
otherwise
respectively.
If
the
bit value
"Apply service handover
IE"
RNC
will"0",
perform
strategy
sets
as
RNC
will
ignore
and "service
handover"
is not
base
on handover"
the
value ofIE"service
"service
in
included
in requested
RAB,
handover"
IE.
requested
RAB,
and perform
RNC will also
perform
This
parameter
indicates
the
strategy
according
to service
strategy
based on
time
interval
of
issuing
interhadnover
strategy
set
by
PsNrtServHoStra, otherwise
frequency
measurement
RNC;
If the
bit value
setsand
as
RNC will
perform
strategy
inter-RAT
measurement.
"1"
and
handover"
is
base
on"service
the
value
of "service
When
RNCIE.
issues
internot
included
in requested
handover"
frequency
the
RAB, RNCmeasurement,
will also perform
timer
is start. If service
the quality of
corresponding
non-used
frequency
bad
handover strategy
setis by
during
the time length
RNC, otherwise
RNC will
indicated
by this parameter,
perform strategy
base on the
This
parameter
indicates
RNC
will
issue
inter-RAT
value of "service
handover"
whether
UE performs
measurement
if there FDD
is an
IE.
inter-frequency
measurement
inter-RAT neighboring
cell.
in CELL_FACH state.
RNC and PLMN handover control
RNC
handover control
UTRAN Cell
Idle Mode and

Common Channel
Behavior

whether UE performs interUTRAN Cell
RAT measurement in
CELL_FACH state.
This parameter indicated
whether the configuration of
the set of measurement
UTRAN Cell
parameters to be sent in
system information is
This
parameter
indicates
broadcast
in SIB11
or SIB12.
whether absolute priority
Reselection criteria is used. If
UTRAN Cell
AbsPriReselSwch sets as
"On", RNC will broadcast
SIB19, otherwise, SIB19 will
not be broadcasted.
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
Idle Mode and

Common Channel
Behavior
Cell Individual
Offset(dB)
each cell being monitored.

The offset can be positive or
negative. Before the UE
judges whether an event
occurs, adds the offset to the
measurement result. If the
PCPICH uses a positive
offset, the UE sends the
offset, the PCPICH report is
This
parameter
is the
limited.
When the
cell
detected
handover
individualset
offset
is used, the
This
parameter
indicates
the
control
switch. cell
corresponding
is possibly
handover
switch
based
on
(at least temporarily) the
downlink
power. or
target celltransmit
of the handover
When
the
switch
is
on, if set.
removed from the active
downlink transmit power
arrives at the threshold
configured by OMCR, RNC
will initiate compressed mode
This
and inter-frequency
HCS
priority level (0-7) for
measurement.
the GSM cells. 7 is the
highest priority, 0 is the
lowest priority.
UTRAN Cell
Handover Control
UTRAN Cell
Handover
Control /RAN
Performance
Monitor
UTRAN Cell
Handover Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior / HCS
/Handover Control
Inter-frequency
Handover Method
This paramerer indicates the

inter handover method is
UTRAN Cell
periodical method or event
method.
Handover Control
Inter-frequency
Handover Tactic

inter-frequency handover
UTRAN Cell
tactic.
Handover Control
UTRAN Measurement
Quantity for Intrafrequency
Measurements

UTRAN measurement
quantity for intra-frequency
measurements.
UTRAN Cell
Handover Control
Inter-RAT Handover
Method
The paramerer indicates the

inter-RAT handover method
UTRAN Cell
is periodical method or event
method.
Handover Control
Detected Set Handover

Switch
DL Tx Power Switch for

Handover
HCS_PRIO

UTRAN Measurement
UTRAN measurement
Quantity for Interquantity for inter-frequency
frequency and Inter-RAT
and inter-RAT
Measurements
measurements.
Preferred Traffic Type
Inter-RAT Handover
Tactic

which traffic type is in the
cell.
UTRAN Cell
Handover Control
UTRAN Cell
Load Balance

UTRAN Cell
inter-RAT handover tactic.
Handover Control

Scenario Type for network
Scenario Type
planning
and network
This parameter
indicates
optimization
parameters
whether service
handoverinisa
cell.
allowed
or not. When the
"service handover" IE is
included in RAB assignment
Service Handover
request. If the switch is "On",
Switch
RNC will perform related
process according to the
value of "service handover"
The
paramerer
indicates
the
IE, otherwise
RNC
will ignore
soft
handover
method is
the
"service
handover"IE.
Soft Handover Method
periodical method or event
This
method.
configuration index of the
Inter-frequency
inter-frequency measurement
Measurement
Configuration Index
type. There are several
Related to Traffic
different
sets of indicates the
This parameter
Category
measurementindex
values
configuration
of the
according
to different
traffic
Intra-frequency
intra-frequency
measurement
types.
Measurement
Configuration Index
Related to Traffic
different
This parameter
Category
measurementindex
values
configuration
of the
according
to different traffic
Inter-RAT Measurement types.
Configuration Index
Related to Traffic
different
This parameter
Category
measurement
values
handover
switch
based on
according
to different
uplink transmit
power.traffic
When
types.
the switch is on, if uplink
UL BLER Switch for
BLER quality arrives at the
Handover
This
parameter
indicates
threshold
configured
by the
handover
switch
based
OMCR, RNC will initiateon
uplink
transmit
power.
compressed
mode
andWhen
interthe
switch measurement.
is "On", if uplink
frequency
UE Tx Power Switch for transmit power arrives at the
Handover
threshold configured by
OMCR, RNC will initiate
compressed mode and interfrequency
or inter-RAT
This parameter
indicates
measurement.
Use of HCS in Cell
whether
the HCS is used or
Reselection
not.
An offset is allocated for
each cell being monitored.
This
parameter
indicates
The offset
can be
positivehow
or
to performBefore
neighbor
negative.
the UE
Inter Frequency or Inter measurement
a cell
has
judges whetherif an
event
RAT Handover Switch
both
inter-frequency
and
occurs, adds the offset to the
inter-RAT
cellsresult.
as its If the
measurement
neighbors.
PCPICH uses a positive
offset, the UE sends the
Cell Individual
Offset(dB)
offset, the PCPICH report is
limited. When the cell
individual offset is used, the
corresponding cell is possibly
(at least temporarily) the
target cell of the handover or
removed from the active set.
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell and

Handover Control
Service Related
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover
Control /HCS /Idle
Mode and Common
Channel Behavior
UTRAN Cell
handover control
UTRAN
Handover Control
Neighboring Cell
Measurement Priority of
Neighboring Cell

Hierarchical Cell
Reselection (Qhcs) of
Neighbouring Cell When
Measurement
Quantity
Quality Threshold
Level
is CPICH
Ec/No
for
Applying
Prioritised
Broadcasted
in
Hierarchical Cell
SIB11(dB)
Measurement
Quantity
Quality Threshold
Level
is CPICH
Ec/No
for
Applying
Prioritised
Broadcasted
in
Hierarchical Cell
SIB12(dB)
Measurement
Quantity
Quality Threshold
Level
is CPICH
RSCP
for
Applying
Prioritised
Broadcasted
in
Hierarchical Cell
SIB11(dBm)
is CPICH RSCP
Quality
Offsetin1
Broadcasted
(Qoffset1s,
SIB12(dBm)n) Between
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB11(dB)
Quality Offset 1
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB12(dB)
Quality Offset 2
(Qoffset2s, n ) Between
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB11(dB)
Quality Offset2
Serving Cell and
Neighbouring Cell
Broadcasted in
SIB12(dB)

measurement priority of the
neighboring cell. The highest
This
parameter
the
priority
is 0, the indicates
lowest priority
effective
time
of
the
is 2.
neighboring cell temporary
offset. The cell belongs to the
HCS structure. This
parameter
is required
when
This parameter
indicates
the
queue
the
cells
in
the
cell
effective time of the
reselection
This
neighboringrule.
cell temporary
parameter
is
broadcast
offset. The cell belongs to
to UE
the
in SIB11.
HCS
structure. This
queue
the selection
cells in the
cell
When cell
and
reselection
rule.
This
reselection is set to CPICH
parameter
broadcast to UE
Ec/No, Thisisparameter
in SIB12. the quality threshold
specifies
hierarchical
cell
When cell selection
and
reselection.This
reselection is setparameter
to CPICH is
broadcasted
in SIB11.
Ec/No, This parameter
specifies the quality threshold
hierarchical
cell
When cell selection
and
reselection.This
to CPICH is
broadcasted
in SIB12.
RSCP, this parameter
hierarchical
cell
When cell selection
and
reselection.This
to CPICH is
broadcasted
in SIB11.
RSCP, This parameter
levels
for applying
prioritised
This parameter
indicates
the
hierarchical
cell
quality offset of the service
reselection.This
parameter
cell and neighboring
cell is
broadcasted
in
SIB12.
when the measurement
quantity is CPICH RSCP.
This
indicates
the
whenparameter
queues cells
in the cell
quality
offsetrule.
of the
service
reselection
This
cell
and neighboring
celltofor
parameter
is broadcast
UE
CPICH
RSCP.
This
in SIB11.
This
parameter
indicates
queue
the cells in
the cellthe
quality
offsetrule.
of the
service
reselection
This
cell
and neighboring
cellto UE
parameter
is broadcast
when
the measurement
in SIB12.
quantity is CPICH Ec/No.
This
indicates
the
whenparameter
queues cells
in the cell
quality
offsetrule.
of the
service
reselection
This
cell
and neighboring
celltofor
parameter
is broadcast
UE
CPICH
Ec/No.
This
in SIB11.
queue the cells in the cell
reselection rule. This
parameter is broadcast to UE
in SIB12.
Idle Mode and

Common Channel
UTRAN
Behavior /Handover
Neighboring Cell
Control / Admission
Control
Idle Mode and
UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
UTRAN
Idle Mode and
Neighboring
Common Channel
Cell, GSM
Behavior
Neighboring Cell
Idle Mode and
UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior

status of the neighboring cell.
When SIB11 is to be sent,
Thiscells
parameter
indicates
the
that support
idle
Broadcast in either
whether
cell willfrom
be the
mode arethe
selected
SIB11 or SIB11bis
broadcast
in cells
SIB11
neighboring
listorand are
SIB11bis.
filled in SIB11;
When SIB12 is to be sent,
the cells that support
UE State Indicator Used
connected mode are
for UTRAN Neighboring
selected from the
Cell Configuration
This
parameter
the
neighboring
cellsindicates
list and are
temporary
offset for CPICH
filled in SIB12;
RSCP.
Themeasurement
cell belongs to
When the
the
HCS
structure.
control message is This
to be
parameter
is required
when
sent, the cells
that support
SIB11
This
indicates
the
queue
the cells
the cellfrom
DCHparameter
status
are in
selected
temporary
offset
of
the
reselection
rule. cells
This list and
the neighboring
neighboring
cell
for CPICH
parameter
broadcast
to UE
are filled inisthe
measurement
RSCP.
The
cell
belongs
to
in
SIB11.
control message.
the HCS structure. This
SIB12
parameter
is required
when
This parameter
indicates
the
queue
the
cells
in
the
cell
temporary offset of the
reselection
ThisCPICH
neighboringrule.
cell for
parameter
is
broadcast
Ec/No. The cell belongsto
toUE
in SIB12.
the
HCS structure. This
SIB11
parameter
is required
when
This parameter
indicates
the
queue
the
cells
in
the
cell
temporary offset of the
reselection
ThisCPICH
neighboringrule.
cell for
parameter
is
broadcast
Ec/No. The cell belongsto
toUE
in SIB11.
the
HCS structure. This
SIB12
queue the cells in the cell
reselection rule. This
parameter
is broadcast
This parameter
indicatesto UE
in SIB12.the HCS is used or
Use of HCS in Cell
whether
Reselection
not.

CE
balance based on CE
resource is open or not.
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
UTRAN
Handover Control
Neighboring Cell
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common Channel
Neighboring Cell
Behavior
Idle Mode and

UTRAN
Common channel
Neighboring Cell
behavior/HCS
UTRAN Cell

UTRAN Cell
Bandwidth
balance based on bandwidth
This
parameter
is open
or not. indicates the
uplink available HSUPA
Permitted Payload
Difference Available
balance between interLoad Threshold in Inter- frequency cells used to
UTRAN Cell
frequency Cells (HSUPA calculate load of source cell.
Throughput)
The larger the value is, the
harder of balance will be
triggered.vice versa.
HSUPA Throughput
UTRAN Cell
Weight for Load Balance weight of HSDPA throughput.
Load Balance
Load Balance
Load Balance
Load Balance

uplink available HSUPA
balance between UTRAN
cells. If the ink available
UTRAN Uplink Available
HSUPA throughput of local
Load Balance Threshold
UTRAN cell is less than the
(HSUPA Throughput) for This parameter indicates the
HSUPA
balance
tendency
parameter,
the ink when
load
UTRNA
balance neighboring
judgment is cell,
GSM
neighboring
in
performed
and UEcells
in local
User Number Offset of Multi-Mode
and
cell may be system
balanced
to other
This
parameter
indicates the
UTRAN for Balance
common
GSM neighboring
UTRAN
cell.
balance
tendency
when
cells exist
simultaneously.
UTRNA
neighboring
The larger
the value cell,
is, the
GSM
in
easierneighboring
neighboringcells
cell of
User Number Offset of multi-mode
system
and
UTRAN will be balanced.
GSM in Multi-Mode
common
GSM neighboring
This parameter
indicates the
System for Balance
cells
exist
simultaneously.
balance tendency
when
The larger
the value cell,
is, the
UTRNA
neighboring
easier
neighboringcells
cell of
GSM neighboring
in
GSM
in multi-mode
system
multi-mode
system and
User Number Offset of will be balanced.
common GSM neighboring
GSM for Balance
cells exist simultaneously.
easier neighboring cell of
common GSM system will be
GSM Cell's Carrier
balanced.
GSMparameter
Cell's Carrier
Number
This
indicates
the
Number
service handover strategy
controlled
by RNC.
Bit0-Bit3
This parameter
indicates
the
indicates
of AMR
equivalentstrategery
HSPA users.
service,
CS64 service,
Where MAX_BP
is the PS RT
service
and
PS
NRT
Equivalent HSPA Users maximum number of service,
the
respectively.
the
bitequals
value
Basicparameter
Priority,Ifwhich
This
indicates
the
sets
as
"0",
RNC
will
ignore
to 16. handover strategy
service
"service
handover"
controlled
by RNC. IE
If in
requested RAB,
and as
perform
ServHoInd
Bit0 sets
Service Handover
strategy
according
to service
"Ignore service
handover
IE",
Strategy Indicator
hadnover
strategy
set by
RNC will ignore
"service
RNC;
If theIE
bitinvalue
sets the
as
This
parameter
indicates
handover"
requested
"1"
and
"service
handover"
service
handover
strategy
RAB, and perform strategy is
not
included
requested
controlled
byin
RNC.
If
based
on AmrServHoStra;
If
Service Handover
RAB, RNC Bit1
will also
ServHoInd
sets
as
ServHoInd
Bit0
setsperform
as
Strategy of RNC for
corresponding
service
"Ignore
servicehandover
handoverIE"
IE",
"Apply service
AMR
handover
strategy
set byisthe
RNC
will ignore
"service
and "service
handover"
not
This
parameter
indicates
RNC,
otherwise
RNC
will
handover"
in requested
included
inIE
requested
RAB,
service
handover
strategy
perform
strategy
base
RAB,
and
perform
strategy
RNC will
also
perform
controlled
by RNC.
If on the
value
of
"service
handover"
Service Handover
based
on
Cs64ServHoStra;
If
strategy based
ServHoInd
Bit2 on
sets as
IE.
Strategy of RNC for
ServHoInd
Bit1
sets
as
AmrServHoStra,
otherwise
CS64
"Apply
service
RNC
will
perform
strategyIE"
ignorehandover
"service
This
parameter
indicates
and
"service
handover"
isthe
not
base
on
the
value
of "service
handover"
IE
in
requested
service
handover
strategy
included
in
requested
RAB,
handover"
IE.RNC.strategy
RAB,
and perform
controlled
by
If
RNC
will
also
perform
Service Handover
based
on
PsRtServHoStra;
If
ServHoInd
Bit3
sets
as
based
on
Strategy of RNC for PS strategy
ServHoInd
Bit2
sets
as
"Ignore
service handover
IE",
Cs64ServHoStra,
otherwise
RT service
"Apply
service
handover
IE"
RNC
will
ignore
"service
RNC"service
will perform
strategy
and
handover"
is not
handover"
IEvalue
in requested
base
on the
of "service
included
in
requested
RAB,
RAB,
and perform
strategy
handover"
IE. perform
RNC
Service Handover
basedwill
onalso
PsNrtServHoStra;
based
onsets as
Strategy of RNC for PS strategy
If ServHoInd
Bit3
PsRtServHoStra,
otherwise
NRT service
"Apply service handover
IE"
RNC"service
will perform
strategy
and
handover"
is not
base
on the
value of "service
included
in requested
RAB,
handover"
IE.
RNC will also perform
strategy based on
PsNrtServHoStra, otherwise
RNC will perform strategy
base on the value of "service
handover" IE.
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
RNC Switch for PS

Handover with LTE

whether RNC support PS
handover with LTE.
RNC SRVCC Switch

whether RNC support
SRVCC.

R99 RT Inter
whether R99 RT inter-Rat
Rat(EUTRAN) Handover
handover to EUTRAN
Switch
allowed or not.

R99 NRT Inter
whether R99 NRT inter-Rat
handover to EUTRAN
Switch
allowed or not.

HSDPA Inter
whether HSDPA inter-Rat
handover to EUTRAN
Switch
allowed or not.

HSUPA Inter
whether HSUPA inter-Rat
handover to EUTRAN
Switch
allowed or not.

which inter-RAT will be
Choice Strategy in Multichosen in priority for
RAT Handover
handover
in multi-RAT
This parameter
indicates the
scenario. of adding new radio
threshold
link based on Ec/No in soft
Threshold of Adding
handover. When the Ec/N0 of
New Radio Link Based
new radio link is lower than
On Ec/N0 In Soft
the
indicated
by thisthe
Thisvalue
parameter
indicates
Handover
parameter,
willnew
not radio
threshold ofRNC
adding
handle
the
related
soft
link based on RSCP in soft
Threshold of Adding
handover
handover. event.
When the RSCP
New Radio Link Based
of new radio link is lower than
On RSCP In Soft
the value indicated by this
Handover
parameter, RNC will not
handle the related soft
The
parameter
handover
event.indicates
UTRAN Cell of Multiwhether the neighboring
Mode System Indicator UTRAN cell belongs to MultiMode
System. indicates
This parameter
whether RNC handle the
adding new radio link in soft
Adding New Radio Link handover, when the signal
Judgement Switch
quality of new radio link is
lower than
EcN0ThrAddNRLSHO or
RSCPThrAddNRLSHO.
UTRAN Cell
Handover Control
RNC
Handover Control
RNC
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control

RTWP load low threshold.
When the RTWP payload of
RTWP Load Low
a cell is lower than the value
Threshold
indicated by the parameter, it
The
parameter
indicates
means
the RTWP
load state
RTWP
load
of the cell
is medium
low.
threshold. When the RTWP
RTWP Load Middle
payload
of a cellindicates
is lower than
The parameter
Threshold
the
value
indicated
RTWP load mediumby the
parameter,
means
the
threshold. Ifitthe
RTWP
RTWP
load
state
of
the
payload of a cell is lowercell
than
is
themedium.
value indicated by the
RTWP Load High
parameter, it means the
Threshold
RTWP load state of the cell
is high. If the payload of a
The
indicates
TCP
cell isparameter
greater than
the value
load
low
threshold.
When
the
indicated by the parameter,
TCP
payload
of
a
cell
is
the RTWP load state of the
TCP Load Low
lower
the value
cell is than
overload.
Threshold
means
the TCPindicates
load stateTCP
of
The
parameter
the
is low.threshold.
loadcell
medium
When the TCP payload of a
TCP Load Middle
cell
lower than
the value
The isparameter
indicates
TCP
Threshold
indicated
by
the
parameter,
it
load medium threshold. If the
means
the TCP
load
TCP
payload
of a
cellstate
is of
the
cell
is medium.
lower
than
the value
TCP Load High
means the TCP load state of
Threshold
the cell is high. If the payload
of a cell
is greater
than the
The
parameter
indicates
value
indicated
by the
code load
low threshold.
parameter,
the TCP
loadof a
When the code
payload
Code Load Low
state
of
the
cell
is
overload.
The
parameter
indicates
cell is lower than the value
Threshold
Code
loadbymedium
threshold.
indicated
the parameter,
it
If
the
Code
payload
a cellof
means the code loadofstate
is
than
thelower
cell is
low.the value
Code Load Middle
means the Code load state of
Threshold
the cell is medium.if the
occupied code resource is
The
parameter
greater
than theindicates
value CE
load
low
threshold.
When theit
indicated by this parameter,
CE
payload
of
a
cell
means that the code is lower
parameter
indicates
CE
CE Load Low Threshold The
than
the value
indicated
by
resource
load state
is high.
load
medium
threshold.
If
the
the parameter, it means the
CE
ofof
a cell
is lower
CE payload
load state
the cell
is
than
low. the value indicated by
the parameter, it means the
CE Load Middle
CE load state of the cell is
Threshold
medium.if the occupied code
resource is greater than the
The
valueparameter
indicated indicates
by this the
low
threshold
of
the number
parameter, it means
that the
of
HSDPA
user.
If
the
number
code resource load
state
is
HSDPA User Number
of
HSDPA user is lower than
high.
Low Threshold
the value indicated by this
parameter, the HSDPA user
load state of the cell is low.
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
HSDPA User Number

Middle Threshold
HSUPA User Number

Low Threshold
HSUPA User Number

Middle Threshold
MBMS User Number

Low Threshold
MBMS User Number

Middle Threshold
Signal User Number

Low Threshold
Signal User Number

Middle Threshold
Mobility Configuration
Scene
Cell Radius Scene
Scene
Scene

middle thrshold of the
number of HSDPA user. If the
number of HSDPA user of a
cell is greater than
DPAUNumLowThd and lower
than the value indicated by
this parameter, it means the
HSDPA user load state is
middle;
if the number
of the
The
parameter
indicates
HSDPA
user isofgreater
than
low
threshold
the
number
The
parameter
indicates
the
the
value
indicated
by
this
of
HSUPA
user. of
If the
number
middle
thrshold
the
parameter,
it means
thatthan
the
of
HSUPA
is lower
number
of user
HSUPA
user.is
If the
HSDPA
user
load
state
the
valueofindicated
by this
number
HSUPA user
of a
high.
parameter,
thethan
HSUPA user
cell
is greater
load
state of the celland
is low.
UPAUNumLowThd
lower
HSUPA user load state is
middle;
if the number
of the
The
parameter
indicates
HSUPA
user isofgreater
than
low
threshold
the
number
The
parameter
indicates
the
the
value
indicated
by
this
of
MBMS
user. Ifofthe
number
middle
thrshold
the
parameter,
it means
that the
of
MBMSofuser
is lower
number
MBMS
user.than
If the
HSUPA
user
load
state
is
the
valueofindicated
by this
number
MBMS
user
of
a
high.
parameter,
thethan
MBMS user
cell
is greater
load
state of the cell is
low.
MbmsUNumLowThd
and
lower than the value
indicated by this parameter, it
means the MBMS user load
The
the
stateparameter
is middle; indicates
if the number
low
threshold
number
of MBMS
userofisthe
greater
than
of
users
.indicates
If the
thesignal
value
indicated
by thisthe
The
parameter
number
of signal
parameter,
it means
middle
thrshold
ofusers
thethatisthe
lower
the
value
MBMSthan
user
load
state
number
of signal
users.isIf the
indicated
by
this
high.
number
of singal parameter,
users of a
the
userthan
load state of
cell signal
is greater
the
cell is low.
SigUNumLowThd
and lower
signal user load state is
middle;
if the number
of
The parameter
indicates
signal
users
is
greater
than
handover and cell reselection
the value indicated
this
scenarios.For
each by
scenario,
parameter,
it means that the
the corresponding
signal
user
state
high.
parameters load
can be
setisas
different
For eachvalues.
scenario, the
corresponding parameters
can be set as different
values.The parameter
indicates scenarios related to
cell
The radius.
parameter indicates
scenarios.For each scenario,
the corresponding
parameters can be set as
different
values.indicates
The parameter
the corresponding
different values.
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior
UTRAN Cell
Handover Control
UTRAN Cell
Handover Control
Scene
Downlink EUTRAN
Absolute Radio
Frequency Channel
Number
Uplink EUTRAN
Absolute Radio
Frequency Channel
Number
EUTRAN Measurement
Bandwidth
Inter-Frequency Balance
Switch Based on
Measurement
Inter-Frequency Balance
Switch Based on
Measurement for Cell
with Overlapping or
Covering Relation
User Number with
Compressed Mode
Activation for Balance
Strategy Based On
Measurement
Timer of Deactivate
Compressed Mode for
Balance Strategy Based
On Measurement
Cpich Ec/N0 Threshold

for Blind Handover
Cpich RSCP Threshold

for Blind Handover
Serving Cell Reselection
Threshold 2 for Absolute
Criteria(Threshserving,
low2)

the
Thecorresponding
parameters
can beAbsolute
set as
downlink E-UTRA
different
values.
Number (EARFCN). F_DL is
center carrier frequency,
F_DL_low is dl lowest carrier
frequency, N_DL is
DlEARFCN, N_Offs-Dl is
carrier
frequency
offset the
The parameter
indicates
indicated
by band
indicator.
uplink
E-UTRA
Absolute
Number.
balance switch based on
This parameterIfindicates
theis
measurement.
this switch
maximum
allowed
on, neighboring
cells with
measurement
bandwidth in"
on
"neighbor" or "contained
a
carrier
frequency.
relation use measurementbased balance; neighboring
This
indicates
cells parameter
with "Overlap"
or
balance
based
"Covers"switch
relation
may on
also
measurement.
If the
use measurement-based
RabMeaBalStaSwch
and
balance only if
CoverMeaBalSwch
CoverMeaBalSwch is
is on,
on too.
balance
based
Otherwise,
onlyon
blind
This
parameter
indicates
the
measurement
be
handover-based
balance
will
number
of userwill
with
performed
to mode
the
neighboring
be
performed
to the
compressed
activation
cells
with overlapping
or
neighboring
cells withbased
for balance
strategy
covering
relation,
otherwise,
"Overlap"
or "Covers"
on
measurement.
When user
balance
on blind of
relation. based
accesses
and condition
handover
will
be
performed
measurement balance
is
to
the
neighboring
cells with
fulfilled
,
If
current
user
This
parameter
indicates
overlapping
or covering
number
in compressed
mode
timer
of
deactivate
relation
is not less than
thisfor
compressed
mode
parameter,
compressed
balance strategy
based on
mode
will
not
activated,
measurement.be
When
the
otherwise,
compressed
timer expired,
if intermode
will
be activated
afterdoesn't
rab
frequency
event(2C)
This
parameter
indicates
the
assignment
procedure.
report,
RNC
will
judge
Cpich Ec/N0 threshold for
whether
compressed
mode is
blind handover
in procedure
deactivate
or
not
based
onIf
of service reconfiguration.
current
signal
quality.
reported Cpich Ec/N0 is less
than
or equal to indicates the
This parameter
EcNoQualThrd,
blind for
Cpich RSCP threshold
handover
will
not
blind handover in be
procedure
triggered.
of service reconfiguration. If
reported Cpich RSCP is less
This
than parameter
or equal to is used in the
rules
for cell reselection
RscpQualThrd,
blind
based
on RSRQ
handover
will not when
be
absolute
triggered.priorities are used. It
specifies the limit for
SqualServingCell in the
serving cell below which the
UE may perform cell
reselection to a cell on a
lower absolute priority layer.
UTRAN Cell
Handover Control
EUTRAN
Handover Control
Neighboring Cell
EUTRAN
Handover Control
Neighboring Cell
EUTRAN
Handover Control
Neighboring Cell
RNC
Load Balance
RNC
Load Balance
UTRAN Cell
Load Balance
RNC
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
UTRAN Cell
Idle Mode and

Common Channel
Behavior
Reselection Threshold 2
for Inter-RAT Layers of
High Priority in
EUTRAN(Threshx,
high2)
Reselection Threshold 2
for Inter-Rat Layers of
Low Priority in
EUTRAN(Threshx, low2)
Qqualmin of EUTRAN
for Cell Reselection
Threshold of RSRQ
indicator
Modification Period
Coefficient for MBMS
Sub-service Type
Event 4A Counter
Threshold for E-TTI
Switching from 10ms to
2ms
Event 4B Counter
Threshold for E-TTI
Switching from 2ms to
10ms
Switch of E-TTI
Switching Triggered by
User Plane Throughput
Measurement
DTX/DRX Switch
HARQ RV Configuration

threshold for cell reselection
based on RSRQ to a higher
This
parameter
the
priority
EUTRANindicates
cell. There
threshold
for
cell
reselection
have 2 elements fulfilled for
based
on RSRQcriteria:
to a lower
cell reselection
(1)
priority
EUTRAN cell. There
SqualnonServingCell,
x of a
have
elements
fulfilledcell
for
higher3 priority
EUTRAN
cell
reselection
criteria : (1)
is greater
than Threshx,
No
cellduring
of a higher
high2
a timepriority
interval
frequency
or
inter-RAT
fulfills
Treselection (2)
more than
1
the
criteria
above
(2)
second has elapsed since
SqualServingCell
the UE camped on< the
Threshserving,
low2 and the
current serving cell.
SqualnonServingCell, x of a
lower
priority EUTRAN
cell
is
This parameter
indicates
the
greater
than
Threshx,
low2
minimum
required
This
parameter
is aquality
switch
during
aEUTRAN
time interval
level
of
cell which
which
indicates
whether
Treselection
(3) more than
satisfies
the
condition
of 1
Threshx,
high2
and Threshx,
second
has
elapsed
since
beingare
reselected
by UE.
low2
configured
or not. If
the UE camped
on the
Threshx,
high2
and
Threshx,
current serving cell.
low2 are not configured, UE
performs
absolute
prioritythe
This parameter
indicates
reselection
based
on
modification period RSRP,
otherwise UE
coefficient
for performs
MBMS. MBMS
absolute
priority
reselection
modification
period
equals
based
on
RSRP
2^k*10ms, whereork RSRQ.
is the
For
details please
modification
periodrefer to TS
25.304.
This
parameter
indicates
coefficient for MBMS.
A the
sub
service
type,
used
for
modification period to start
numbering
for each
subSFN
from the frame
with the
service.
Where
are used
value fulfills
the 0..9
following
for
signalling
service;
equation:
SFN
mod
2^k =the
0.
This
parameter
indicates
10...250
usedthreshold
for single
event 4Aare
counter
service.
Odd E-TTI
number
is
for switching
from
configured
for
downlink
10ms to 2ms. For the UE
service;
even number
is of
using E-DCH,
if the times
configured
for user
uplinkplane
service.
the
measured
EThis parameter indicates the
DCH
throughput
being
larger
event 4B counter threshold
than
the 4A threshold
exceed
for switching
E-TTI from
2ms
the
threshold
indicated
by Eto 10ms. For the UE using
this
parameter
and
DCH,
if the times
of2ms
the ETTI is used,
UE's
E-TTI
will
measured
user
plane
E-DCH
be
switchedbeing
to 2ms.
throughput
less
than
the
4B of
threshold
exceed the
switch
E-TTI switching
threshold
indicated
by this
triggered by user plane
parameter
and
10ms
E-TTIIfis
throughput measurement.
used,
UE's E-TTI
will to
be"Off",
this
parameter
is set
switched
to 10ms.
the function
of E-TTI
This
parameter
is the
switching
triggered
by user
DTX/DRX
switch indicating
plane throughput
whether
DTX/DRX
is allowed
measurement
is valid,
to
be
used.
When
the
value
otherwise invalid.
of the switch is "On",
DTX/DRX is allowed to be
This
indicates the
usedparameter
by the system;
RV
configuration
selected
otherwise
DTX/DRX
is not by
RNC
when
theused.
E-DCH Harq
allowed
to be
Combining Capability IE in
AUDIT RESPONSE returned
by NodeB takes the value of
'IR and Chase Combining
Capable'
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
UTRAN Cell
Idle Mode and

Common Channel
Behavior /Handover
Control
RNC
MBMS /Connection
Management
Service Related
Parameter
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC
HSPA Evolution
RNC
HSUPA Introduction

maximum
bit rate
HSThis parameter
is with
a switch
SCCH
Less for Nonwhich indicates
whether HSHS-SCCH Less Switch VoIP/AMR.
SCCH Less is allowed to be
Non-VoIP/AMR
services are
used by the RNC
allowed to use HS-SCCH
Less function only when the
Maximum Bit Rate with following conditions are all
HS-SCCH Less for Non- satisfied:
VoIP/AMR(kbps)
(1)
Switch is
ThisHS-SCCH
parameterLess
is the
"On";
DTX/DRX
switch for non(2)
HS-SCCH
Less
Switch for
realtime
services
indicating
Non-VoIP/AMR
is
"On";
whether DTX/DRX is allowed
DTX/DRX Switch for
(3)
The
assigned
to be
used.
Whenmaximum
the value
NRT
bit
rate
is
less
Max
of the switch isthan
"On",
theBit
nonRate
with
HS-SCCH
Less
for
This
parameter
is
HS-SCCH
realtime services are allowed
Non-VoIP/AMR.
Less
for nonto useswitch
DTX/DRX,
otherwise
VoIP/AMR
not allowed.services. When
HS-SCCH Less Switch the value of the switch is
for Non-VoIP/AMR
"On", other services except
This
parameter
is the to use
VoIP/AMR
are allowed
DTX/DRX
for real time
HS-SCCH switch
Less, otherwise
speech
services
indicating
not allowed.
whether DTX/DRX is allowed
DTX/DRX Switch for
to be used. When the value
Speech
of the switch is "On", the
This
parameter
a switchare
speechreal
timeisservices
indicating
allowed towhether
use DTX/DRX,
decreasing
guaranteed
otherwise not
allowed. bit
Switch for Shielding
rate is supported or not
GBR Reduction Shared
when the cell is in the
by Uplink and Downlink
overload
state. This
This parameter
indicates the
parameter
is shared
Maximum Number of
maximum number
of by the
uplink
and
downlink.
Services Whose GBR
selected services whose
Can Be Decreased in
guaranteed bit rates will be
Load Control Every Time decreased each time when
overload happens. This
Downlink
parameter is shared by uplink
and
This downlink.
parameter is a switch
MBMS Iub Transport
indicating whether Iub
Bearer Multiplex Switch transport bearer multiplexing
is used on the Iub interface
The Minimum Rate
Threshold of the
SCCPCH Setup for
MBMS(kbps)
Waiting Time for RRC
CONNECTION SETUP
Message When MBMS
is Used(T318)
Cell ID
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
RNC
HSPA Evolution
UTRAN Cell
Services and Radio

Access Bearers
UTRAN Cell
Services and Radio

Access Bearers
RNC
MBMS

minimum
of
T318 is a rate
timerthreshold
which starts
RNC
the
SCCPCH
setup
for
after transmission of RRC
MBMS.
CONNECTION REQUEST in
case of connection
establishment for MBMS
reception and stops after
RNC
reception of RRC
CONNECTION SETUP.
When T318 expires, UE
enters idle mode and will not
Cell
is valid only in
sendIdentity
RRC CONNECTION
the
RNC where
the cell
UTRAN Cell
REQUEST
again.
locates.
MBMS
MBMS
Parameter

of the PICH. Common
physical channel ID is the
PICH Common Physical
unique identifier allocated to UTRAN Cell
Channel ID
one common physical
channel within a cell. One
cell can contain several
This
PICHs.
Number of Paging
number of the PI (Paging
Indicators per PICH
UTRAN Cell
Indicator) that one PICH
Frame
radio frame contains.
Cell Uplink 16QAM

Support Indicator
Cell Uplink 16QAM

Support Indicator
CQI DTX
Timer(subframe)
UE DPCCH
Burst_1(subframe)
UE DPCCH
Burst_2(subframe)
Inactivity Threshold for

UE DRX
Cycle(subframe)
UE DRX
Cycle(subframe)
UE DRX Grant
Monitoring
UE DTX Cycle 1 for

10ms TTI(subframe)

whether UL16QAM is
supported in the cell.
CQI DTX timer. When UE
detects consistent control
This
parameter
indicates
information
intended
for this
whether
UL16QAM
is does
UE and the TFRI value
supported
in thetocell.
not correspond
a HSSCCH order or UE has
successfully decoded HSPDSCHs intended for this
UE, UE will start CQI DTX
timer. When CQI DTX timer
When
UE enters
DTX priority
mode
is running,
CQI report
controlled
by UE
will be higher
thanDTX
DTXcycle
1,
UE shall
transmit
DPCCH
priority.
When
CQI DTX
timer
burst
in each
DTX cycle
1.
expires,
CQI report
priority
The
length
of
uplink
DPCCH
will be lower than DTX
burst
shall
equals
to the
priority,
i.e.enters
CQI report
only
When
UE
DTX
mode
number
of
the
subframes
takes
place
in
the
timeslots
controlled by UE DTX
cycle
indicated
bytransmit
thisgap.
parameter.
of
nonshall
DPCCH
2, UE
DPCCH
burst
in
each
DTX
2.
When UE does notcycle
detect
The
length
of
uplink
DPCCH
consistent control information
burst
shallforequals
to or
thethe
intended
this UE
number
of
the
subframes
received TFRI value does not
indicated
byto
this
parameter.
correspond
a HS-SCCH
order or UE hasn't
successfully decoded HSPDSCHs intended for this UE
for last number of subframes
After
UE enters
indicated
by thisdownlink
parameter,
DRX
mode,
UE downlink
shall detect
UE shall enters
HS-SCCH
in each number of
DRX status.
subframes indicated by this
This
parameter indicates
parameter.
whether UE monitors the full
E-AGCH of the serving cell
when the start of the EAGCH or E-RGCH
This
parameter
indicates
transmission
overlaps
withthe
an
UE
DTX cycle
1 for 10ms
HS-SCCH
reception
TTI.
When E-DCH TTI is
subframe.
10ms and UL DTX mode is
active, if UE enters DTX
mode controlled by UL DTX
mode 1, UE will use the
value indicated by this
parameter as DTX cycle 1.
Node B
Management
Connection
Management /Node
B Management
Utran Cell
HSUPA Introduction
Utran Cell
HSUPA Introduction
Service Related HSPA Evolution
HSPA Evolution /
Service Related HSUPA Packet
Scheduling
HSPA Evolution /
Scheduling
UE DTX Cycle 1 for 2ms

TTI(subframe)

UE DTX Cycle 2 for
10ms TTIs

TTIs
UE DTX Cycle 2 for

10ms TTI(subframe)

TTI(subframe)
UE DTX/DRX
Configuration Index
UE DTX Long Preamble

Length(slot)

UE Grant
Monitoring(TTI)
MAC DTX Cycle for

10ms TTI(subframe)
MAC DTX Cycle for 2ms

TTI(subframe)
MAC Inactivity
Threshold(TTI)

UE DTX cycle 1 for 2ms TTI.
When E-DCH TTI is 2ms and
UL DTX mode is active, if UE
enters
DTX mode
controlled
This parameter
indicates
the
by
UL
DTX
mode
1,
UEUE
will
inactivity threshold for
use the
value
indicated
by If
DTX
cycle
2 for
10ms TTI.
this
asE-DCH
DTX cycle
thereparameter
has no any
1.
transmission for the number
of
E-DCH
TTIs indicated
This
parameter
indicates by
the
this
parameter,
UE
willUE
use
inactivity threshold for
UE DTX
cycle
as DTX
DTX
cycle
2 for2 2ms
TTI. If
cycle,
i.e. UE
will E-DCH
transmit
there has
no any
DPCCH
burstfor
in the
each
UE
transmission
number
DTX
cycle
2.
of E-DCH TTIs indicated by
this
will use
Thisparameter,
parameter UE
indicates
the
UE DTX
DTX cycle
cycle 2
2 for
as DTX
UE
10ms
cycle,
i.e. UE
will transmit
TTI. When
E-DCH
TTI is 2ms
DPCCH
burst
in each
UE
and UL DTX mode
is active,
DTX
cycle
2.
if UE enters DTX mode
controlled
by ULindicates
DTX mode
This parameter
the
2, UE
willcycle
use the
value
UE
DTX
2 for
2ms TTI.
indicated
by this
When E-DCH
TTIparameter
is 2ms and
as
DTX
cycle
2.
UL DTX mode is active, if UE
enters DTX mode controlled
by UL DTX mode 2, UE will
This
parameter
is UE by
use the
value indicated
DTX/DRX
configuration
Index
this parameter
as DTX cycle
which
indicates a set of
2.
DTX/DRX parameters. Each
service obtains the DTX/DRX
This
parameter
indicates
the
parameters
according
to the
UE
long preamble
UE DTX
DTX/DRX
configuration
length.
index. When UE enters DTX
status controlled by UE DTX
cycle 2, if there is data to be
transmitted on E-DCH, UE
shall transmit
firstly
After
E-DCH isDPCCH
scheduled,
in
UEmonitor
DTX long
UEthe
shall
thepreamble
full Elength
slots.
AGCH
of the E-DCH
serving
This parameter
indicates
the
cell
and
E-RGCH(s)
of
all
MAC DTX cycle for 10ms
cells
in the E-DCH
TTI. When
UL DTXactive
modeset
is
for
the number
of E-TTIs
active,
if no E-DCH
indicated
by this
transmission
hasparameter.
been
performed
for
the
last MAC
the
Inactivity
Threshold-1
E-TTIs,
MAC DTX cycle for 2ms
TTI.
UE
willUL
perform
E-TFCis
When
DTX mode
selection
periodically
active, if no
E-DCH in each
MAC
DTX cycle.
transmission
has When
been EDCH
TTI
is
10ms,
MAC
DTX
performed for the last
MAC
cycle
equals
to
MAC
DTX
Inactivity
Threshold-1
E-TTIs,
This
parameter
indicates
the
cycle
forperform
10ms TTI.
UE
will
E-TFC
MAC inactivity threshold.
selection
When ULperiodically
DTX mode in
is each
MAC
DTX
cycle.
When
Eactive, if no E-DCH
DCH
TTI
is
2ms,
MAC
DTX
transmission has been
cycle
equals
MAC
DTX of
performed
fortothe
number
cycle
for
2ms
TTI.
continuous E-TTIs indicated
by this parameter-1, UE will
perform E-TFC selection
periodically in each MAC
DTX cycle.
HSPA Evolution /
Scheduling
HSPA Evolution /
Scheduling
This
used forthe
This parameter
parameter is
indicates
the
discontinuous
reception
lower
limit of guaranteed
bit
of
UE
in
the
connection
rate used for QoS
mode.
This parameter is for
negotiation/renegotiation
used
to
Downlinkcalculate
servicesthe paging
occasion, that is, a constant
required in monitoring the
UTRAN DRX Cycle
PICH cycle. The
Length Coefficient
discontinuous reception cycle
is 2k frames. In the
connection
mode,
k is thethe
This parameter
indicates
minimum
value
in
CS
level number of the domain
Negotiated GBR Level
DRX cycle length
coefficient,
negotiated
guaranteed
bit
Number Shared by
PS
DRX cycle
rate.domain
This parameter
is length
Uplink and Downlink
coefficient,
and UTRAN
DRX
shared
by uplink
and
This
parameter
indicates
cycle
length
coefficient.
downlink.
whether the QoS negotiation
during RAB establishement
Switch for QoS
or relocation and the QoS
Negotiation/Renegotiatio
renegotiation during the
n
conversation after the service
is established are permitted
Lower Limit of GBR for This
parameter
indicates the
by the
RNC.
Uplink Services Used for lower limit of guaranteed bit
QoS
rate used for QoS
parameter indicates for
the
Negotiation/Renegotiatio This
common
physical
channel
ID
n(kbps)
uplink services.
of SCCPCH. This parameter
is unique in one cell.
S-CCPCH Common
Common
physical
channelthe
ID
This parameter
indicates
Physical Channel ID
is
the
unique
identifier
time offset between
allocated
one
commonFor
SCCPCH to
and
PCCPCH.
physical
channel
within
a cell
different S-CCPCHs,
there
Up
up
to
32
SCCPCH
can
be
are may be different SFrame Timing Offset
established
in a And
cell. the time
CCPCH
timing.
Between SCCPCH and
offset relative to the PPCCPCH(chip)
CCPCH frame timing is the
integral times of 256 code
chips. That is, SCCPCH,
k = Tk*256
codethe
This
parameter
indicates
SCCPCH Usage
chip
and of
TkSCCPCH.
{0, 1, ..., 149}.
purpose
Lower Limit of GBR for
Downlink Services Used
for QoS
Negotiation/Renegotiatio
n(kbps)
RNC
Services and Radio

Access Bearers
RNC
Connection
Management
RNC
Services and Radio

Access Bearers
RNC
Services and Radio

Access Bearers
RNC
Services and Radio

Access Bearers
UTRAN Cell
Node B
Management
UTRAN Cell
Node B
Management
/Connection
Management
UTRAN Cell
Node B
Management
/Connection
Management

Broadcast in either SIB5 whether the SCCPCH
UTRAN Cell
or SIB6
information is broadcast in
SIB5 or SIB6.
is activated for the SCCPCH
S-CCPCH STTD
or not. The transmit diversity UTRAN Cell
Indicator
mode used by the SCCPCH
is Space Time Transmit
Diversity (STTD).
Direction
whether a sub service is
Service Related
uplink or downlink.
Connection
Management
Node B
Management
Services and Radio

Access Bearers
CN Domain Indicator

Services and Radio
whether the sub service is in Service Related
Access Bearers
CS domain or in PS domain.
Maximum Bit Rate(bps)

maximum bit rate of a sub
service. The parameter takes
Services and Radio
Service Related
the value of the assigned
Access Bearers
maximum bit rate in RAB
parameters
MBMS Indicator
Sub-Service
Traffic Class

whether this service is a
Service Related MBMS
This
parameter
MBMS
service. indicates the
sub service type, used for
numbering for each sub
service. 0...5 are used for
siganlling service; 6...250 are
Service Related
used for single service. Odd
Parameter
number is configured for
downlink
service;
even the
This parameter
indicates
number
is
configured
service type of the subfor
uplink service
service,
which can be
Services and Radio
Service Related
conversational, streaming,
Access Bearers
interactive, background or
unknown conversational.
Cell 64QAM Support

Indicator

whether the cell supports the Utran Cell
64QAM function or not.
HSPA Evolution
Cell HSUPA 2ms TTI

Support Indicator

Utran Cell
HSUPA 2ms TTI function or
not.
HSUPA Introduction
S-CCPCH Common
Physical Channel ID
Minimum Bit Rate(bps)
Common E-DCH
Transmission Time
Interval
Logical Channel Type

Indication for Common
E-DCH MAC-d Flow

PCH common transport
channel ID related to the
This
PICH.parameter indicates the
common E-DCH
transmission time interval.
According
to theindicates
specification
This parameter
the
there
are
two
kind
minimum bit rate ofofaE-TTI,
sub
which
are 10ms and 2ms Eservice.
TTIs. 10ms E-TTI is
mandatory and it should be
supported by all UEs and all
cells which support E-DCH
and 2ms E-TTI is optional for
cell, is mandatory for UE.
When 2ms E-TTI is
supported by the capability of
This
parameter
the logical
the Node
B, the isvalue
of Echannel
type indicator
for
TTI configured
in the OMCR
common
MAC-d flow.
should beE-DCH
used, otherwise
10ms E-TTI should be
applied.
UTRAN Cell
Node B
Management
Service Related
Services and Radio

Access Bearers
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH

HARQ Power Offset for
HARQ power offset for
Common E-DCH MAC-d
RNC
common E-DCH MAC-d flow
Flow (2ms TTI)
when 2ms E-TTI is used.
Uplink Enhanced
CELL_FACH

HARQ Power Offset for
HARQ power offset for
Common E-DCH MAC-d
RNC
common E-DCH MAC-d flow
Flow (10ms TTI)
when 10ms E-TTI is used.
Uplink Enhanced
CELL_FACH

Maximum Number of
maximum number of
Retransmissions for
retransmissions for common
Common E-DCH MAC-d
E-DCH MAC-d flow when
Flow (2ms TTI)
2ms E-TTI is used.
Maximum Number of
maximum number of
Retransmissions for
retransmissions for common
Common E-DCH MAC-d
E-DCH MAC-d flow when
Flow (10ms TTI)
10ms E-TTI is used.
Common E-DCH
maximum size in octets of
Maximum Uplink RLC
the RLC PDU in the flexible
PDU Size
RLC PDU size mode used in
common E-DCH.
Common E-DCH
minimum size in octets of the
Minimum Uplink RLC
RLC PDU in the flexible RLC
PDU Size
PDU size mode used in
common
E-DCH.
This
parameter
indicates
whether the MAC-d flow
carrying DTCH and the MACCommon E-DCH MAC-d
d flow carrying DCCH are
Flow Multiplexing Switch
allowed to be multiplexed in
the same MAC-i PDU when
common E-DCH is used.
Spreading Factor
spreading factor supported
Supported by Uplink
by Uplink enhanced
Enhanced CELL_FACH
CELL_FACH.
Allowed UL Common
MAC Flow Transport
Bandwidth for the Cell
UE DTX/DRX
Configuration Index
RACH Common
Transport Channel ID
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH
RNC
Uplink Enhanced
CELL_FACH

allowed uplink common MAC
UTRAN Cell
HSPA Evolution
flow transport bandwidth for
the
Thiscell.
parameter is UE
DTX/DRX configuration Index
which indicates a set of
DTX/DRX parameters. Each
service obtains the DTX/DRX
parameters
according
to the
This parameter
indicates
the
UE
DTX/DRX
configuration
common transport channel
index.
ID of RACH. Common
transport channel ID is the
Node B
UTRAN Cell
unique identifier allocated to
Management
one common transport
channel within a cell One cell
contains only one BCH.
RACH TTI

transmission time interval of UTRAN Cell
the RACH.

supports uplink 16QAM or
not.
typical SCCPCH
configuration scenarios. For
SCCPCH Configuration
each scenario, the
Scene
corresponding load balance
different
values.indicates the
This parameter
This
parameter
indicates
thea
the Release UE Number maximum number
of UE in
configuration
index
of
the
when Band Exceeds
cell whose transport resource
traffic
measurement
Limit
will bevolumn
released
while
parameters,
which
is used to
transport path is overload.
Usually,
the bandwidth
of
configuration
sets for traffic
UE Traffic Volume
Common
Channel( CCH
) is
volumn measurement.
There
Measurement
set
the maximum
valueof
are as
several
different sets
Configuration Index
that
it may use,values
but in for
most
measurement
theof
time,
lesser
value should
sameaset
of parameters
be
OK. Especially
in the
according
to specific
Common Transfer
bandwidth-lacking
Bandwidth Discount
environment,
as an
E1
measurementsuch
quantity
and
Factor for Channel
which
so on. is required to support 6
This
parameter
or more
cells, a indicates
CCH
whether
thewith
CN aassignment
configured
maximum
GBR
of
AMR
service
is
value
is
not
a
good
option.
GBR of AMR Service
forcibly
reservedofinCCH
Iu UP
V1,
The
bandwidth
can
Whether to be Reserved
when
the
CN
assignment
be adjusted by parameter
Indicator
GBR
is not matching
the
CCH bandwidth
CAC with
factor.
AMR rate configured by
RNC.
Classified Zone Indicator
whether the local cell is the
of DRNC cell
designated zone or not.
Sixteen QAM UL
Support Indicator
NodeB No.
NE Office Id
Preferred NBAP Link
Inter_RNC
External UTRAN
Adjencent cell
Cell
Basic Parameter
UTRAN Cell
Configuration
Model Scene
Parameter
RNC
Transport Resource
Release Control
UTRAN Cell
idle Mode and

Common Channel
Behavior /Handover
Control
Utran Cell
Idle Mode and

Common Channel
Behavior
RNC
AMR-NB & AMRWB
External UTRAN
Location Service
Cell

Node B number, which is
Node B
valid in RNC.
NE Office Id
Preferred NBAP Link
Idle Mode and

Common Channel
Behavior
Parameter
Node B
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
separation
Node B
Mutual Production
between IP and
ATM Link
First Standby NBAP Link First Standby NBAP Link
Node B
Mutual Production
between IP and
ATM Link
Second Standby NBAP

Link
Second Standby NBAP Link
Node B
Mutual Production
between IP and
ATM Link
Bear Type of Preferred

NBAP Link
Bear Type of Preferred NBAP

Node B
Link
Multipath
Production in IUB
Bear Type of First

Standby NBAP Link
Bear Type of First Standby

NBAP Link
Node B
Multipath
Production in IUB
Bear Type of Second

Standby NBAP Link
Bear Type of Second

Standby NBAP Link
Node B
Multipath
Production in IUB
Use Type
Use Type
Node B
Mutual Production
between IP and
ATM Link
CCP Id
CCP Id
Node B
Mutual Production
between IP and
ATM Link
Out Stream Id
Out Stream Id
Node B
Mutual Production
between IP and
ATM Link
EUTRAN Cell Type

EUTRAN Cell Type.
Eutran Cell
Handover Control
Start Value of IDNNS

RNC
start value of Idnns range
RAN Sharing
End Value of IDNNS

RNC
End value of Idnns range
RAN Sharing

The Routing Select Type
applied feature info of Ue for RNC
for UE-Based
Routing CN
which positions of Digit for
IMSI match. If a position is
set as 1, the digit of
The Imsi Mask Flag
RNC
corresponding position
needed to be matched,
otherwise, ignore the digit of
corresponding position
The Imsi Matched Digit
RNC
macthed digit
The RuleNo of IMSIMAP
Switch of Permit PS
Handover from LTE to
UTRAN Because of
CSFB
Resource Pool Identifier

in CS Domain

in PS Domain

in CS Domain

in PS Domain
Vitrual Location Aera

Code
Vitrual LAC Paging

Support Indication

Rule No of Imsi-map
This is a switch that RNC
permit PS traffic handover
from LTE to UTRAN because
UE start a CS call with CSFB
symbol.
This
parameter indicates
Resource Pool Identifier in
CS Domain, if the Route
Selection UE-Based is
supported, RNC will execute
NNSF
among the
CN belong
This
parameter
indicates
to
the same
resource
pool
Resource
Pool
Identifier
in
PS Domain, if the Route
NNSF
among the
CN belong
This
parameter
indicates
to
the same
resource
pool
Resource
Pool
Identifier
in
CS Domain, if the Route
NNSF
among the
CN belong
This parameter
indicates
to
the
same
resource
pool
in
PS Domain, if the Route
NNSF among the CN belong
to the same resource pool
Virtual Location Aera Code of
the Cell, which is used to
expand the paging range
RNC support Virtual LAC
Paging or not
RAN Sharing
RAN Sharing
RAN Sharing
RNC
RAN Sharing
PLMN
CSFB
RNC
RAN Sharing
RNC
RAN Sharing
RNC
RAN Sharing
RNC
RAN Sharing
CELL
Connection
Management
RNC
Connection
Management
MBMS Channel Rate

Support Indicator
MR-UE Initial Call

Location Measurement
Mode
This parameter is used to

indicate whether MBMS
services of different bit rate
are supported or not
Specifies the MR-UE initial

call location measurement
mode for the MR function.
waiting time length for CELL
UPDATE
RNC sending
Specifies after
the MR-UE
MR-UE Periodical
Radio
Linklocation
Deactivation
periodical
Location
Measurement
Time of Waiting
for
command
aftermode
RB for the
measurement
Mode
CELL UPDATE After
MR function.
RNC Waiting ACTIVE
se Response Timer
SET UPDATE
Expiration.
COMPLETE/
Start: Transmission of Radio
RECONFIGUATION
Link Deactivation in case of
COMPLETE of Hard
RNC found rl failure or rlc
This
parametererror
indicates
Handover Timer
unrecoverable
or the
power
for response
white list
Expiration UPDATE
doesn'toffset
receive
users.
When
the
COMPLETE Timer
message
fromcalculate
UE.
Power
Offset for White initial
power for
white
Expiration
Stop: DL
Reception
of the
CELL
List User
list
user,
this
parameter
an
UPDATE
This
parameter indicatesisthe
additional
power
offset
to
the
At expiry:
Release
RRCfor
sub
service
type, used
initial
DL power
calculating
connection
of
UE.
numbering
for
each
sub
This
parameter
indicates
formula
of
normal
user.forthe
service.
0...5
are used
step
of increasing
the uplink
siganlling
are
SIR targetservice;
for white6...250
list users.
Sub-service Type
used
for
single
service.
Odd
In order to restore
number
is configured
communication
qualityfor
as
downlink
service;
even it
soon as possible when
number
isworse
configured
This
parameter
indicates
becomes
and for the
uplinkofservice
step
decreasing
the uplink
Uplink SIR Target Up
decrease
the communication
SIR
target
for when
white itlist users.
Step Size(dB)
quality
slowly
In
order tobetter
restore
becomes
(to make it
communication
quality
asof
more reliable), the
steps
soon
as
possible
when
it
increasing and decreasing
becomes
worse
and
Uplink SIR Target Down are set asymmetricly so there
decrease
the communication
are two parameters
used
Step Size(dB)
quality
slowly when it
separately.
becomes better (to make it
more reliable), the steps of
This
parameter
indicates the
increasing
and decreasing
Uplink SIR Target
maximum
step of decreasing
are
set
asymmetricly
so there
Maximum Down Step
the
uplink
SIR targetused
for white
are
two
parameters
Size(dB)
list
users.
separately.
This
This parameter
parameter indicates
indicates the
whether uplink
outerDPCH
loop
maximum
downlink
power
controlpower
(OLPC)
based
transmission
for
white
SIR Target Adaptive
on
SIRtarget
adaptive
down
list
users.
When
performing
Down Step Size Switch
step
size is used
not for
the downlink
innerorloop
white
list
users.
power control, the new
DPCH Maximum DL
smaller than or equal to the
Power(dB)
configured DPCH Maximum
DL Power. If the newly
computed transmission
power is larger than the
configured DPCH Maximum
DL Power, make it equal to
the configured DPCH
Maximum DL Power.
RNC
MBMS
RNC
RAN Performance
Monitor
RNC
RAN Performance
Monitor
RNC
connection
management
RNC
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use

minimum downlink DPCH
transmission power for white
list users. When performing
the downlink inner loop
power control, the new
DPCH Minimum DL
larger than or equal to the
Power(dB)
configured DPCH Minimum
DL Power. if the newly
This
parameter
indicates the
computed
transmission
quality
factor
of
ULthe
power is smallerthe
than
DPCCH
PILOT
domain
for
configured DPCH Minimum
DPCCH Pilot Field
This
parameter
indicates
the
white
list users.
Ititisequal
usedto
for
DL
Power,
make
Eb/N0(dB)
maximum
allowed
UL
power
calculating
the DPCH
UL DPCCH
the configured
for
white
list
When
power
offset
for
a newly
Minimum
DLusers.
power.
performing
the uplinkcall.
inner
white user accessed
Maximum Allowed
loop power control, the newly
Uplink DPCH
calculated transmission
Transmission
power of UE may be over the
Power(dBm)
Maximum
allowed
UL TX the
This parameter
indicates
power,
in
such
case
the UE
initial SIR target for white
list
can
only
transmit
with
users. The target SIR is the
Maximumtoallowed
TX
Uplink Initial SIR
standard
performUL
the
power.
Target(dB)
uplink inner loop power
The
parameter
indicates
the
control.
The value
has effect
transport
channel
BLER
on
the
convergence
speed
of
quality
target
for
white
list
the
power
control.
maximum uplink SIR target
users,
which
is the base
Maximum Uplink SIR
for white
list users,
whichofis
outerloop
power
control.
Target(dB)
used to give the range forFor
the
the
service
with
target
SIR of
themore
outerthan
loop
one
subflow,
parameter
power
control.thisindicates
This
parameter
the
is applied
for the first
minimum uplink SIR target
subflow.
Minimum Uplink SIR
for
white list
users,
Signalled
value
is which is
Target(dB)
used
to
give
the
for the
Log10(Transportrange
channel
target
SIR
of
the
outer
loop
BLER quality target), i.e.
power
control.
physical
value P in TS
25.331 is Log10(actural
value); the scalar value D in
BLER Target
TS
is P*10;
value the
This25.331
parameter
indicates
configured
in
database=
error transport block number
D+63;
acutual
value
threshold
in outer
loop power
The
parameter
indicates
configured
through
man- the
control
using threshold
the
tolerance
period
in uplink
machine interface
in
algorithm
for
whitecontrol
listthe
users.
outer
loop
power
listed
in
Number Threshold(TBs) background=10^P,
When
the
number
of
error
using
threshold
algorithm
for
exponential
form,
see
the
blocks
exceeds
the threshold
This
parameter
indicates
white
list
users.
When
the
table
in
value
range.
wthin
a period,
shall
white
list
users
R99
CS
AMR
tolerance
periodRNC
is not
over,
increase
the
SIR
target
services
error
transport
block
the
number
of error
block is
This
parameter
indicates
Method
of
calculation:
immediately.
number
threshold
when
cell
Tolerance BLER
exceed
the
error
block
white
list
users
AMR
BLEREVAL=1:
63; forservices
in
high
load
status
R99
Period(TBs)
threshold,
then
adjust
the
tolerance
BLER period when
BLER=10.^((BLEREVALCS
AMR
SIRtarget
upward;
the
cell
in theservices
high loadwhen
status
for
63)/10);
adjustment.
When
the
switch
tolerance
period
is
arrived,
R99
CS
AMR
BLER
target
R99 CS AMR Services S=[BLEREVAL; BLER]'
for
auto
adjustment
the BLER
number
of
error
block
is
adjustment.
When
the
switch
function
is
"On",
if block
the cell is
smaller
than
error
for
BLER
auto
adjustment
Number Threshold in
in
uplink is
high
load
status,
threshold,
then
adjuct
the
function
"On",
if the
cell use
is
this
parameter
in
the
OLPC
SIRtarget
downward,
else
do
in uplink high load status, use
BLER Target
function
as following:
when
nothing.
this
parameter
in
the
OLPC
Adjustment(TBs)
number
of error blocks
R99 CS AMR Services the
function
as following:
when
exceeds
the
Tolerance BLER Period the tolerancethreshold
period is within
not
period,
shall increase
in High Load Status for a
over,
and RNC
the number
of error
the
SIR
target immediately.
BLER Target
block
is exceed
the error
This parameter
onlyadjust
valid
Adjustment(TBs)
block
threshold,isthen
for
R99 upward;
CS AMRwhen
the uplink
SIR target
services.
the tolerance period is
arrived, and the number of
error block is smaller than
error block threshold, then
adjust the SIR target
downward, else do nothing.
This parameter is only valid
for uplink R99 CS AMR
services.
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
R99 CS AMR Services

BLER Target in High
Load Status for BLER
Target Adjustment
Threshold of HARQ
Failure Indication
Threshold of HARQ
Failure Indication
SIR Target Downward
(10ms E-TTI)

SIR Target Upward
(10ms E-TTI)
Threshold of Sample
Threshold of Sample
Target Downward(10ms
E-TTI)
SIR Target Downward
(2ms E-TTI)

SIR Target Upward (2ms
E-TTI)
Threshold of Sample
Threshold of Sample
Target Downward (2ms
E-TTI)
function is "On", if the cell is

in downlink high load status,
the BLER target of downlink
R99 CS AMR services send
This
the
to UEparameter
is get fromindicates
this
threshold
parameter.of HARQ failure
indication
number
to increase
Signal value
is
SIR
target
for
white
list users
Log10(Transport channel
when
the
BLER E-TTI=10ms.
quality target),If i.e.
times
of
HARQ
failure
physical
value
P
in
TS
exceeds
threshold
within
25.331 isthe
Log10(actual
threshold
of HARQ
failure
the
timethe
window,
shall
value);
scalar RNC
value
D in
indication
number
to increase
increase
the
SIR
target.
It is
TS 25.331
is P*10;
SIR
target for
white value
list users
only
applicable
for
the
configured
in database=
when
E-TTI=2ms.
If the times
services
carried
on
E-DCH.
D+63;
actual
value
of
HARQ
failure
exceeds
the
This
parameter
indicates the
We
get
this
parameter
configured
through
manthresholdofwithin
the time
number
HARQ
according
to E-DCH
user
machine
interface
inincrease
the
window,
RNC
shall
retransmission
(NHR)
number
level asIt
following:
background=10^P,
listed
in
the
SIR
target.
is
only
threshold
to decrease
SIR
E-DCH
user
number
low
exponential
form,
see
the
applicable
for
the
services
target
for
whiteuser
list users
level
E-DCH
number
table
in
value
range.
carried
on
E-DCH.
We
get the
when
E-TTI=10ms.
When
medium
level
E-DCH
user
this
parameter
according
to
This
parameter
indicates
the
NHR
is less
than
number
high
levelthe level as
Method
of
calculation:
E-DCH user
number
number
of RNC
HARQ
threshold,
shall
ThrHarqFailTti10[0]
BLEREVAL=1:
63;target. It is
following:
retransmission
(NHR)
decrease
the SIR
ThrHarqFailTti10[1]
BLER=10.^((BLEREVALE-DCH
user
number
threshold
to
increase
SIRthe
only
applicable
thelow
This
parameter for
indicates
ThrHarqFailTti10[2]
63)/10);
level
E-DCH
user
number
target
for
white
list
users
services carried
on E-DCH.
threshold
of sample
number
S=[BLEREVAL;
BLER]'
medium
level
E-DCH
userthe
when
E-TTI=10ms.
When
Weincrease
get
this
parameter
to
SIR
target
for
number
high
level
NHR
exceeds
the
threshold,
according
to E-DCH
white
list users
whenuser
EThrHarqFailTti2[0]
RNC
shall
increase
the
SIR
number
level
as SIR
following:
TTI=10ms.
The
target
ThrHarqFailTti2[1]
target.
Ituser
is only
applicable
for
E-DCH
number
low
can
not
be
increased
unless
This
parameter
indicates
ThrHarqFailTti2[2]
the
services
carried
on less
E-the
level
E-DCH
user
number
the
sample
number
no
threshold
of
number
DCH.
Welevel
getsample
this
parameter
medium
E-DCH
user
than
the
threshold.
When
to
decrease
SIR
target
for
according
to E-DCH
user
number
high
level
HARQ
retransmission
or
white
listlevel
users
Enumber
aswhen
following:
NhrThrDownTti10[0]
failure
is recorded
once
then
TTI=10ms.
The
SIR
target
E-DCH
user
number low
NhrThrDownTti10[1]
a sample
isdecreased
obtained.
And
if
can
not
be
unless
level
user number
NhrThrDownTti10[2]
find
noE-DCH
HARQ
the
sample
number
no
less
medium
level E-DCH
user
retransmission,
it also
is
athe
This
parameter
indicates
than
the high
threshold.
When
number
level
sample.
We
get
this
number
of
HARQ
HARQ
retransmission or
NhrThrUpTti10[0]
parameter
according
to Eretransmission
(NHR)
failure
is
recorded
once
then
NhrThrUpTti10[1]
DCH
user
number
level
as if
threshold
to
decrease
SIR
a
sample
is
obtained.
And
NhrThrUpTti10[2]
following:
target
white list users
find
nofor
HARQ
E-DCH
user number
low
when
E-TTI=2ms.
When
retransmission,
it also
is athe
This
parameter
indicates
the
level
E-DCH
user
number
NHR
is less
the
sample.
We than
get this
number
of
HARQ
medium
level
E-DCH
user
threshold,
RNC
shall
parameter according to Eretransmission
(NHR)
number
high
level
decrease
the
SIR
target.
It is
DCH user
number
level as
threshold
to
increase
SIR
UpThrSampNuTti10[0]
only
applicable
for
the
This
parameter
indicates
the
following:
target
for
white
list
UpThrSampNuTti10[1]
services
carried
onusers
E-DCH.
threshold
of sample
number
E-DCH
user
number
low
when
E-TTI=2ms.
When
UpThrSampNuTti10[2]
We
get
this SIR
parameter
to
increase
target
forthe
level
E-DCH
user
number
NHR
exceeds
the
threshold,
according
to
E-DCH
user
white
list level
users when
E-user
medium
E-DCH
RNC
shall
increase
the SIR
number
level
as
following:
TTI=2ms.
The
SIR
target
can
number
high
level
target.
Ituser
is only
applicable
E-DCH
number
lowthefor
not
be increased
unless
DwThrSampNuTti10[0]
the
services
carried
on EThis
parameter
indicates
the
level
E-DCH
user
sample
number
no number
less
than
DwThrSampNuTti10[1]
DCH.
We
get
this
parameter
threshold
of sample
number
medium
level
E-DCH
user
the
threshold.
When
HARQ
DwThrSampNuTti10[2]
according
to SIR
E-DCH
user
to
decrease
for
number
high
level
retransmission
ortarget
failure
is
number
level
as
following:
white
list
users
when
ENhrThrDownTti2[0]
recorded once then a sample
E-DCH
user
number
low
TTI=2ms.
The
SIR
target
NhrThrDownTti2[1]
is obtained.
And
if find
no can
level
user unless
number
not
beE-DCH
decreased
the
NhrThrDownTti2[2]
HARQ
retransmission,
it also
medium
levelWe
E-DCH
user
sample
number
no
than
is a sample.
getless
this
number
high
level
the
threshold.
When HARQ
parameter
according
to ENhrThrUpTti2[0]
retransmission
or failure
is
DCH user number
level as
NhrThrUpTti2[1]
recorded
once
then
a
sample
following:
NhrThrUpTti2[2]
is
obtained.
if findlow
no
E-DCH
userAnd
number
HARQ
retransmission,
it also
level E-DCH
user number
is
a sample.
get this
medium
levelWe
E-DCH
user
parameter
according
to Enumber high
level
DCH
user
number
level
UpThrSampNumTti2[0] as
following:
UpThrSampNumTti2[1]
E-DCH
user number low
UpThrSampNumTti2[2]
medium level E-DCH user
number high level
DwThrSampNumTti2[0]
DwThrSampNumTti2[1]
DwThrSampNumTti2[2]
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use

white list users BER target
for a physical channel in
Valid Time Windows when
the
mode is silent,
which
ThisFP
parameter
indicates
is
the base
of outerloop
whether
uplink
outer loop
power
method based
using
power control
control(OLPC)
physical
channel
BER.
on QE is used or not in the
If
QE-Selector
is set
valid
time window
fortowhite
QE Switch For Silent
'Selected'
andFP
theMode
transport
list user if the
is
Mode
channel
BERthe
is available
silent. When
OLPC the
transport
BER
shall
based
on channel
the BLER
is invalid,
This
parameter
indicates
be
the
base
for
the
QE
in the
the
OLPC
based
on
the transfer
E-DCH
HARQ
power
offset
UL
data
frames.
If
no
channel
BER can
be used.
parameter
indicates
the
Physical Channel BER This
FDD
for white
list
users,
transport
channel
BER
is
threshold
of
physical
Target For Silent Mode number
which
is used
to selected
compute the
available
for the
channel BER
less
than
or of
quantized
gain
factor
ed
DCH, the
equal
BERphysical
target
inchannel
the
E-DPDCH.
For
detail
BER
beloop
used
for the
uplinkshall
outer
power
please
refer
The Number Threshold descriptions
QE.
If
the
QE-Selector
is to
set
control
BER based algorithm
TS25.214.
of Physical Channel
to
"Non-selected",
the
for
list users.
When the
Wewhite
get this
parameter
BER Less Than or Equal physical
channel
BER
shall
number
of
physical
channel
according
tothe
E-DCH
user
BER Target
be
used
for
QE
in
the
UL
BER lesslevel
thanasorfollowing:
equal BER
number
data
frames.
When
mixed
target
is
greater
than
or
equal
E-DCH
user
number
services
are used,
thelow
to
the number
of threshold,
level
E-DCH
user
combination
methodnumber
is toSIR
E-DCH HARQ Power
RNC
shall
decrease
the
medium
level
E-DCH
user
take
the
minimum
value
Offset FDD
target
immediately.
number
high
level
among all the
EdchHarqPOFdd[0]
QePhychBerTarSil values of
EdchHarqPOFdd[1]
the mixed services.
EdchHarqPOFdd[2]
Timer of Relocation
Note:
Now, the
E-DCH
Delay for VIPs's CS
timer length
of relocation
HARQ
power
offset
is related
Service
delay for VIPs' CS service.
to the default E-DCH user
number level
DefaulEdchNumLev. That
Timer of Relocation
This
parameter
indicates
means
the E-DCH
HARQthe
Delay for VIPs's PS
timer
length
of
relocation
power offset is
Service
delay
for VIPs' PS service.
EdchHarqPOFdd[DefaulEdch
NumLev-1].
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
Service Related
parameter for
future use
RNC
Handover Control
RNC
Handover Control
IMSI Digits Number in

White List for User
Identification

IMSI Digits Number in White RNC
List for User Identification
parameter for
future use
IMSI High-bit Digits in

white List for User
Identification

IMSI High-bit Digits in white RNC
List for User Identification
parameter for
future use
VIP Indication

whether the User is VIP
RNC
parameter for
future use

Basic Priority for User in
basic priority of UE in the
RNC
White List
white list
parameter for
future use
HSPA Scheduling
Priority for User in White HSPA Scheduling priority of RNC
List
UE in the white list
parameter for
future use
Congestion Scheduling This parameter indicates the

Priority for User in White Congestion Scheduling
RNC
List
priority of UE in the white list
Application Priority for

User in White List
User Drop Switch

Triggered by VIP
VIP Exist Notification

Switch
Lowest Priority of
Neighbor Cell Notified of
VIP Existing
Switch for White List

QE Switch For Silent
Mode
VIP Information Require

period
Switch of HSDPA Load

Balance for Signaling on
DCH in RRC Connection
Procedure
Additional Size for
Uplink SIR Target
Increasing When
Consecutive Error TB
Occurs
Valid Time Window for
the TB in Shield Period

application priority of UE in
the white list
whether Forced Call Drop will
be Triggered when the
Ordinary PS Number online
in CELL_DCH state is larger
than PsUserThrdForVIP
when VIP User Exists in the
Cell
whether to Notify neighbor
cell
VIP User
exists inthe
Thisthat
parameter
indicates
the
cell
Lowest Priority of Neighbor
Cell Notified of VIP Existing
when VIP Exists and
Neighbor Cell need to be
notified.Only the neighbor
cell that Measurement
Prioority is equal or higher
than this priority will be
This
parameter indicates
notified.
whether the white list function
This
parameter
is open
or not indicates
whether uplink outer loop
power control(OLPC) based
on QE is used or not in Valid
RNC
if the
cellFP
and
Time checks
Windows
if the
it's
adjacent
cells
mantain
Mode
is silent.
When
the
VIP
user
periodly.
OLPC
based
on the BLER is
When
number
of on
thethe
invalid,the
OLPC
based
cell's
VIP
number
turns
to 0,
transfer
channelindicates
BER can
be
This
parameter
RNC
notifies
the
nodeB.
used.balance strategy for
load
When
theon
number
the
signaling
DCH. of
When
adacent
cell's
VIP
number
RRC singnaling is forced to
turn
to 0, on
RNC
notifies
the
establish
DCH
and the
nodeB.
initial service is classed as
This
parameter
the
"PS service"
andindicates
UE protocol
time
of
the
check
period.
version is equal or greater
(based
seconds).
than
R5,onif 6the
switch
is "On",
This parameter
indicates
the
RNC
could
balance
user SIR
additional size for uplink
based
on HSDPAwhen
load
target increasing
balance
strategy,
otherwise,
This
parameter
indicates
the
consecutive error TB occurs.
RNC
could
balance
user
valid
time
window
for
TB
in
If the last two error TBs is
based
on R99
load
balance
the
shield
period.
In
thistarget
time
consecutive
when
SIR
strategy.
window
after the sheild
will
be increased,
the SIR
period
of SIR target
target increase
step size will
increasing,
if the SIR
target
add this additional
step
size.is
increased again, the SIR
target increase step size will
add an additional step size.
This additional step size is
calculted according to the
error TB number in and out
the shield period for SIR
target increasing.
parameter for
future use
RNC
parameter for
future use
RNC
Congestion Control
RNC
QoS Management
RNC
QoS Management
RNC
QoS Management
UTRAN Cell and

Power Control
Service Related
RNC
parameter for
future use
UTRAN Cell
Handover Control
RNC
Power Control
RNC
Power Control
Uplink SIR Target

Maximum Up Step
Size(dB)
Uplink SIR Target

Maximum Up Step
Size(dB)
Cell Switch of CS Call

Re-establishment in the
SRNC
Cell Switch of PS Call

Re-establishment in the
SRNC
Switch of Using DL
Power Control Request
Information in Iur
Interface
The Offset of CPICH
Ec/No in Iur Interface
Relative to the UE
Measurement Result
Switch of PS Sevice
Channel Allocation for
Concurrent CS+PS
Online-already Service
Reconfiguration Method
for UE of Release 6 and
after Release 6 When
Multi-RAB
Golbal Reserved
Parameter 41
Golbal Reserved
Parameter 42
Golbal Reserved
Parameter 43

maximum step size of
UTRAN Cell and
Power Control
increasing the uplink SIR
Service Related
target.
maximum
sizeto
ofcontrol
The switchstep
is used
increasing
the
uplink
SIR
the call re-establishment
target.
function in the specified
cases. The specified cases
mainly include the following:
when
RNC is
in used
stabletostatus,
The switch
control
executing
handover
flow, or
the call re-establishment
executing
setup
flow;the
This
parameter
indicates
function
inRAB
the specified
and
UE
sending
CELL
switch
of
using
DL
POWER
cases. The specified cases
UPDATE
message,
or RNC
CONTROL
REQUEST
mainly include
the following:
sending
RL in
deactivation
information
in
Iur Interface
when
RNC
stable
status,to
message.
control
power
balancing.
executing
handover
flow, or
When
the RAB
switchsetup
is on,flow;
executing
DRNC
the DL
POWER
and UEsend
sending
CELL
CONTROL
REQUEST
UPDATE message, or RNC
information
Node B which
sending RL to
deactivation
is
same with the DL POWER
message.
This
parameter
indicates the
CONTROL
REQUEST
offset
of
CPICH
in Iur
information sendEc/No
by SRNC
This
parameter
is
interface
relative
the to
This
parameter
istoused
used
to
through
Iur
interface.
control
PS
sevice
CPICH
Ec/No
of ischannel
control
online-already
When the
switch
off,service
allocation
for concurrent
measurement
result.
The
reconfiguration
method
DRNC would
discard
theforDL
CS+PS
.
If
the
parameter
CPICH
Ec/No
in
Iur
interface
UE
of Release
6 and afteris
POWER
CONTROL
on,
for CS
service
first
and
is
calculated
by the
CPICH
Release
6 when
multi-RAB.
REQUEST
information
send
then
PS
service
triggered
Ec/No
ofscene
UE
measurement
For
the
that
it needs to
by SRNC
through
Iur
scene,
allocate
for
result
minus
thisDCH/DCH
offset.
reconfigure
the
already
interface.
the
PS
service;
For
PS
online service at the same
service
firstthe
andsetup
thenof
CS
time when
new
service
triggered
scene,
service, if the paramter isand
set
if PS
HS, perform
to
"0"is, iton
means
it takesthe
RB
HS
to DCH
Setup
method, and then both
reguration.Otherwise,
the online-already service
allocate
HS-DSCH/EDCH,
reconfiguration
and new
HS-DSCH/DCH
service setup by or
theDCH/DCH
RADIO
for PS service
according
to in
BEARER
SETUP
message
UE
onecapability.
step; if the paramter is
set to "1" , it means it takes
Golbal
Reserved Parameter
RB Reconfiguration
method,
41
it first performs the onlinealready service
reconfiguration by RADIO
BEARER
RECONFIGURATION
Golbal
Reserved Parameter
message, and then performs
42
new service setup by RADIO
BEARER SETUP message.
43
Service Related
parameter for
future use
RNC
connection
management
RNC
connection
management
RNC
Power Control
RNC
Power Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC and PLMN
Dynamic Radio
Bearer Control
RNC
parameter for
future use
RNC
parameter for
future use
RNC
parameter for
future use
Golbal Reserved
Parameter 44

44
RNC
parameter for
future use
Golbal Reserved
Parameter 45

45
RNC
parameter for
future use
Golbal Reserved
Parameter 46

46
RNC
parameter for
future use
Golbal Reserved
Parameter 47

47
RNC
parameter for
future use
Golbal Reserved
Parameter 48

48
RNC
parameter for
future use
Golbal Reserved
Parameter 49

49
RNC
parameter for
future use
Golbal Reserved
Parameter 50

50
RNC
parameter for
future use
Golbal Reserved
Parameter 51

51
RNC
parameter for
future use
Golbal Reserved
Parameter 52

52
RNC
parameter for
future use
Golbal Reserved
Parameter 53

53
RNC
parameter for
future use
Golbal Reserved
Parameter 54

54
RNC
parameter for
future use
Golbal Reserved
Parameter 55

55
RNC
parameter for
future use
Golbal Reserved
Parameter 56

56
RNC
parameter for
future use
Golbal Reserved
Parameter 57

57
RNC
parameter for
future use
Golbal Reserved
Parameter 58

58
RNC
parameter for
future use
Golbal Reserved
Parameter 59

59
RNC
parameter for
future use
RNC
parameter for
future use

4A and 4B for throughput
Golbal Reserved
Golbal
Reserved
measurement
on Parameter
E-DCH. If
Parameter 60
60
the throughput becomes
larger than the threshold of
event 4A, a report of 4A
event will be triggered; and if
Throughput Threshold of the throughput becomes
parameter
Event 4A/4B for E-DCH This
smaller
than theindicates
thresholdthe
of
Cpich
EcNo
threshold
for
event 4B,
a report
of 4B
directed
triggered by
event willretry
be triggered.
inter-RAT
balancing.
If
Cpich EcNo Threshold Where
reported
Cpich
EcNo
is less
MAX_UE_TRV_MEAS_EVE
for Directed Retry
than
or
equal
to
NT
is
the
maximum
number
Triggered by Inter-RAT This parameter indicates the
DREcNoQualThrd
or for
of
UE throughput
Cpich
EcNo threshold
Balancing
reported
Cpichtriggered
RSCPwhich
isbyless
measurement
event,
directed
retry
than
or
equal
to
equals to 2.
inter-RAT
balancing. If
Cpich RSCP Threshold DRRscpQualThrd, direct
reported Cpich EcNo is less
for Directed Retry
retry
willequal
not be
This
indicates
than parameter
or
totriggered.
Triggered by Inter-RAT Location Mode Method.The
DREcNoQualThrd or
Balancing
Location
mode RSCP
methodis less
reported Cpich
includes
RNCto
location and
than or equal
SAS
location.RNC location
DRRscpQualThrd,
direct
uses
RNC
inner
location
retry
will
not
be
triggered.
LocModeSwch
module to postion, and SAS
location supports SAS centric
When
mode, VipSpecFreqSwch
which uses SAS tois
true,
RNC
will balance
VIP
choice postion
method(eg,
users
to
VIP
carrier
VIP Specific Frequency cell ID , AGPS etc.) and
frequency.
accomplishNon-VIP
position.user will
Strategy Switch
be balanced to Non-VIP
carrier frequency in case of
high load.
Measobj of
UeTrv,
Dynamic Radio
MeasEvtNum of Bearer Control
UeTrv
UTRAN Cell
Load Balance
UTRAN Cell
Load Balance
RNC
Location Service
RNC
parameter for
future use
VIP Specific Downlink

Carrier Central
Frequency Indicator

downlink carrier central
This
parameter
indicates the
frequency
of VIP.
maximal allowed Non-VIP CS
user number when VIP user
dose not exist in the current
Non-VIP CS User
cell. When Non-VIP user
Number Threshold
number
exceedsindicates
the
This parameter
the
without VIP
threshold,
RNC
will
prohibitPS
maximal allowed Non-VIP
user
access
the cell
VIP
user to
number
when
VIPof
user
carrier
and
balance
the
users
dose not exist in the current
Non-VIP PS User
to non-VIP
cell.
Whencarriers.
Non-VIP user
Number Threshold
number
exceeds
the
the
without VIP
threshold,
RNC
will
prohibitCS
maximal allowed Non-VIP
user
access
the cell
VIP
user to
number
when
VIPof
user
carrier
and
balance
the
users
exists in the current cell.
Non-VIP CS User
to non-VIP
carriers.
When
Non-VIP
user number
Number Threshold
This
parameter
indicates
the
exceeds
the threshold,
RNC
When VIP Exists
maximal
allowed
Non-VIP
will prohibit
user to
access PS
user
number
VIP
user
the cell
of VIPwhen
carrier
and
exists
in
the
current
cell.
balance the users to non-VIP
Non-VIP PS User
When
Non-VIP user number
carriers.
Number Threshold
exceeds the threshold, RNC
When VIP Exists
will prohibit user to access
the cell of VIP carrier , and
balance the users to non-VIP
This
parameter
indicates
carriers
or trigger
R99
VIP Forced Handover
swtich
of forced
handover
congestion
stategy.
Switch
strategy for VIP carrier
frequency.
Switch of RNC Send RL
whether the
Specifies
theRNC
timeSend
delayRL
of
SETUP and RRC
SETUP
and
RRC
deleting
cell
resource
when
CONNECTION SETUP
CONNECTION SETUP in
in Parallel when Setting Node B is unreachable.
parallel when setting up RRC
up RRC CONNECTION. Start: RNC detects the link of
CONNECTION
This
parameter
indicatesRNC
transport
layer between
timer
length
of
delay
process
and NodeB is disconnected.
Time Delay of Deleting when ATM link broken.
Stop: RNC detects the link
Cell When NodeB is
Start:
Whenlayer
NBNM
received
of transport
between
Unreachable(100ms)
AAL
indication,
RNClink
andbroken
NodeBindicates
is restored.
This
parameter
the
timer
isRNC
started.
At expiry:
will delete
cell
timer
length
of delay
process
Expiration:
If
NCPthe
link
resources
about
NodeB
when
IP link
broken.
broken,
NBNM
notified
which When
link
of NBNM
transport
layer is
Start:
received
ATM Link Broken
NBLOMM
that
NCP
is
disconnected.
Protection Time Length association link broken
unavailable;
If CCP
indication, the
timer link
is
broken,
started. NBNM notified
NBLOMM
CCP
is
Expiration:that
If NCP
link
available
broken, NBNM notified
IP Link Broken
Stop:
When
NBNM
NBLOMM
that
NCP received
is
Protection Time Length AAL establish confirm
unavailable; If CCP link
indication,
the timer
is killed.
broken,
NBNM
notified
NBLOMM that CCP is
available
Specifies
theNBNM
servicereceived
type
Stop: When
MR Service Type
which
needs
the
MR
function.
association link establish
confirm indication, the timer
is killed.
RNC
parameter for
future use
UTRAN Cell
parameter for
future use
UTRAN Cell
parameter for
future use
UTRAN Cell
parameter for
future use
UTRAN Cell
parameter for
future use
RNC
Congestion Control
RNC
Connection
Management
NodeB
Node B
Management
RNC
Node B
Management
RNC
Node B
Management
RNC
RAN Performance
Monitor
Value Range
and Step
Unit
Default Value
Related Parameter
NodeBType of
R8NodeB
ToAWE of MO CMbms:
MbmsSuptInd of
R6SrvCel
NodeBType of
R8NodeB
ToAWE of MO
CMbmsS:
MbmsSuptInd of
R6SrvCel
Restriction with
Related Parameters
(0..2559)ms
step1ms
ms
8ms
Only valid when the

cell supports MBMS.
(0..1279)ms
step 1ms
ms
44ms
OMCR: 20ms,
100ms, 250ms;
RNC: 0..2
ms
20ms
N/A
N/A
0..100ms
ms
5ms
N/A
N/A
Only valid when the

cell supports MBMS.
The FACH TOAWE

and PCH TOAWE
MUST be configured
to be the same value
in one CELL.
The FACH TOAWS
and PCH TOAWS
MUST be configured
in one CELL.
The FACH TOAWE
and PCH TOAWE
MUST be configured
in one CELL.
The FACH TOAWS
and PCH TOAWS
MUST be configured
in one CELL.
(0..2559)ms
step1ms
ms
8ms
TOAWE of PCH
(0..1279)ms
step 1ms
ms
44ms
TOAWE of PCH
(0..2559)ms
step1ms
ms
8ms
TOAWE of FACH
(0..1279)ms
step 1ms
ms
44ms
TOAWE of FACH
0: Not up to CN
N/A
1: Up to CN
1: Up to CN
N/A
N/A
0..999
460
MCC of R8CnInfo,
MNC of R8CnInfo
The MNC and MCC

are used to identify
the same PLMN.
N/A
Bandindicator: DCS
1800, BCCHARFCN:
(512..885)
Bandindicator: PCS
1900, BCCHARFCN:
(512 .. 812)
The MNC and MCC
Bandindicator:
are used to
identify
Standard
GSM900,
the same PLMN.
BCCHARFCN:
(1..124)and(955..102
3)
Bandindicator:
Bandindicator: DCS
GSM
1800,
BCCHARFCN:
450,
BCCHARFCN:
N/A
(512..885)
259-293
Bandindicator:
Bandindicator: PCS
1900,
BCCHARFCN:
GSM480,
(512
..
812)
BCCHARFCN:
306Bandindicator:
340
Standard
GSM900,
Bandindicator:
BCCHARFCN:
GSM750,
(1..124)and(955..102
BCCHARFCN: 4383)
511
Bandindicator:
Bandindicator: GSM
450,
N/A BCCHARFCN:
GSM850,
259-293
BCCHARFCN: 128Bandindicator:
251
GSM480,
Bandindicator:
BCCHARFCN:
306Extended GSM900,
340
BCCHARFCN:
Bandindicator:
(0..124)and(975..102
GSM750,
3)
BCCHARFCN:
Bandindicator: 438511
Raiways GSM900,
Bandindicator:
BCCHARFCN:
N/A
GSM850,
(1..124)and(955..102
BCCHARFCN:
1283)
251
Bandindicator:
Extended GSM900,
BCCHARFCN:
N/A
(0..124)and(975..102
3)
Bandindicator:
Raiways GSM900,
BCCHARFCN:
N/A
(1..124)and(955..102
3)
0..999
0:
DCS 1800
Band Used;
1: PCS 1900
Band Used;
2: Standard
GSM
900 Band
0.. 2^32-1
Used
3: GSM 450
Band Used
4: GSM 480
Band Used
5: GSM 750
Band Used
6: GSM 850
Band Used
7: Extended
0..7 900 Band
GSM
Used
8: Railways
GSM 900 Band
Used
0-1023
N/A
MCC of R8CnInfo,
MNC of R8CnInfo
N/A
N/A
N/A
N/A
Bandindicator of
externalGsmCelll,
DCS 1800 Band Used
BCCHARFCN of
externalGsmCell
N/A
NCC
BCC
N/A
Bandindicator of
externalGsmCelll,
BCCHARFCN of
externalGsmCell
0-65535
N/A
N/A
N/A
MCC
MNC
LAC
CI).
N/A
RAC
N/A
0..65535
0: Not GERAN
Cell
1: GERAN Cell
1..0xfffd, 0xffff
N/A
MCC
MNC
LAC
CI
OMCR: (50..33)dBm;
RNC: D=P+50,
0..83
dBm
30 dBm
N/A
N/A
460
MCC
MNC
LAC
CI
N/A
0..999
N/A
0..999
N/A
MCC
MNC
LAC
CI
2..3
N/A
N/A
N/A
0..7
N/A
BSIC
BCC
N/A
1..4
N/A
N/A
N/A
N/A
RAI contain MCC,

MNC, LAC and
RAC(RAI = MCC +
MNC + LAC+ RAC),
only valid when
GeranCellInd is1
SNAC[4] is a list. the
max element number
of list is 4. the valid
element number is
SNACNum .
max element number
element number is
SNACNum .
0..255
N/A
N/A
MCC of R8GsmCel,
MNC of R8GsmCel,
LAC of R8GsmCel,
RAC of R8Gsm Cel
0..65535
N/A
N/A
SNACNum of
R8AdjCel, SNAC[4] of
R8AdjCel
0..
MAX_NUM_SN
N/A
AC_PER_GSM
CEL,
SNACNum of
R8AdjCel
0.. 2^32-1
N/A
N/A
N/A
N/A
MCC of R8AdjCel,
MNC of R8AdjCel,
N/A
RncId of R8AdjCel, CId
of R8AdjCel
N/A
Not Supported
N/A
N/A
N/A
Support
N/A
N/A
0..65535
0: Supported
1: Not
Supported
0: Not Support
1: Support
N/A
N/A
0: Not Support
1: Support
0: Combined
1: Not
Combined
0: May
1: Must
2:
Must
Band
I: not
10562..10838
Band II:
9662..9938,
0:
Not437, 462,
412,
Supported
487, 512, 537,
1:
Supported
562,
587, 612,
637, 662, 687
Band III: 1162..
1513
Band V: 4357...
4458, 1007,
1012,
1032,
0:
IR Combining
1037,
1062,
Capable
1087
1: Combining
Band
VI:
Capable
4387
...4413,
2: IR and Chase
1037,
1062
Combining
Band
VIII:
Capable
2937..3088
(SF8[0], SF4[1],
2SF4[2],
2SF2[3], 2SF2
and 2SF4[4])
0: Not
Supported
1: Supported
0: Supported
1: Not
Supported
0: Supported
1: Not
Supported
0: Not
Supported
1: Supported
N/A
Support
N/A
N/A
N/A
Combined
N/A
N/A
N/A
May
N/A
N/A
N/A
Not Supported
N/A
N/A
N/A
DUARFCN
FreqBandInd
N/A
N/A
IR and Chase Combining

N/A
Capable
N/A
N/A
2SF2 and 2SF4
N/A
N/A
N/A
Supported
N/A
N/A
FDpchSuptInd of
External UTRAN Cell
This parameter can

be set to 'supported'
only when the
FDpchSuptInd of
externalUtranCell is
set to 'supported'
N/A
1: Not Supported
N/A
1: Not Supported N/A
N/A
N/A
Not Supported
N/A
N/A
0: Band I
1: Band II
2: Band III
0:
Support
4: Not
Band
V
HSUPA
5: Bandand
VI
HSDPA
7: Band VIII
1: Support
HSDPA and
DCH
3: Support
HSUPA ,
HSDPA and
DCH
1..0xfffd, 0xffff
N/A
N/A
N/A
N/A
Support HSUPA ,
HSDPA and
N/A
DCH
N/A
MCC
MNC
LAC
CI
N/A
160 subframes
N/A
N/A
dBm
24dBm
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(5, 10, 20, 40,

64, 80, 128,
N/A
160) subframes
OMCR: (50..33)dBm
RNC: D=P+50
0..83
0: Not
Supported
1: Supported
0: Not
Supported
1: Supported
0..999
N/A
OMCR: (10..50)dBm step

0.1dBm; RNC: dBm
D=(P+10)*10,
0..600
N/A
MCC of R8AdjCel,
MNC of R8AdjCel,
N/A
RncId of R8AdjCel, CId
of R8AdjCel
33.0dBm
PcpichPwrPre of
ExternalUtranCell
Only valid when

PcpichPwrPre is
True.
0: False; 1: True N/A
N/A
N/A
1..4
N/A
N/A
N/A
0..511
N/A
N/A
N/A
N/A
0..255
N/A
MCC
MNC
LAC
RAC
0..4095
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
SACBPre
MCC
MNC
LAC
SAC
0: False
1: True
N/A
N/A
N/A
MCC
MNC
LAC
SACPC
N/A
N/A
SNACNum of
R8AdjCel
SNACNum of
R8AdjCel
Not Supported
N/A
0..65535
N/A
0..65535
N/A
0..
MAX_NUM_SN
AC_PER_GSM
CEL,
N/A
MAX_NUM_SN
AC_PER_GSM
CEL=4
0: Supported
1: Not
N/A
Supported

max element number
element number is
SNACNum .
max element number
element number is
SNACNum .
N/A
Bit0: Not
Support/Support
HS-DSCH
Congestion
Detection(0/1)
Bit1: Not
Support/Support N/A
E-DCH
Congestion
Detection(0/1)
Bit2-Bit7
0: Not
Reserved,
Supported;Fixed
1:
N/A
0
Supported
0: Inactive
1: Active
N/A
0
Bit0: Not Support
HS-DSCH
Congestion
Detection=0
N/A
Bit1: Not Support
E-DCH
Congestion
Detection =0
Not Supported
N/A
Inactive
N/A
N/A
N/A
N/A
URA[4] is a list. the

max element number
URANum of R8AdjCel,
URA[4] of R8AdjCel
element number is
URANum .
URA[4] is a list. the
max element number
URANum of R8AdjCel,
URA[4] of R8AdjCel
element number is
URANum .
0..65535
Band I:
9612..9888
Band II:
9262..9538, 12,
1..
37,MAX_URA,
62, 87, 112,
MAX_URA=4
137, 162, 187,
212, 237, 262,
287
Band III:
937..1288
Band V:
4132..4233,
782, 787, 807,
812, 837, 862
Band VI:
0..65534
4162
... 4188,
812, 837
Band VIII:
2712 ..2863
0: Neighbor
1: Overlap
2: Covers
3: Contained in
N/A
N/A
N/A
N/A
FreqBandInd
DUARFCN
N/A
N/A
N/A
N/A
N/A
Neighbor
N/A
N/A
0.. 2^32-1
N/A
N/A
N/A
N/A
(0..255)s Step5s s
60
TinTR
TigOR<=TinTR
(0..300)s Step
10s
100
TigOR
TigOR<=TinTR
200..65535
Unit: 100ms
100ms
300, unit: 100ms N/A
N/A
0: May
1: Must
2: Must not
N/A
May
N/A
N/A
0..65535
N/A
N/A
N/A
0: General
NodeB
N/A
N/A
Bit0:
Not
0: General
Support/Support
NodeB
N/A
HS-DSCH
1: Pico Node B
Congestion
2: Home NodeB
Detection (0/1)
Bit1: Not
Support/Support
N/A
E-DCH
Congestion
Detection (0/1)
Bit2-Bit7
Reseverd,
Fixed
OMCR: 20ms,
0
100ms, 250ms; ms
RNC: 0..2
0..100ms
ms
0..32
N/A
0..32
N/A
0 .. 1023
N/A
0 .. 1023
N/A
Bit0: Not Support HS-DSCH

N/A
N/A
(0/1)Bit1: Not Support E-DCH Conge
20ms
N/A
5ms
N/A
N/A
N/A
Luarfcn[8] and
Uuarfcn[8] are both
FDDFreqRngNum of
arrays, and the
rncFunction, Luarfcn[8] maximum array
2
of rncFunction,
element
number is
8.
GsmLRange[32]
and
Uuarfcn[8] of
Luarfcn[8]
and
GsmURange[32] are
rncFunction
Uuarfcn[8]'s
effective
both arrays, and
the
GsmBARangeNum of element number is
maximum
array
GsmLRange[32]
and
rncFunction,
FDDFreqRngNum.
element
number is
GsmURange[32]
are
GsmLRange[32] of
3
32.
bothGsmLRange[32]
arrays, and the
rncFunction,
and
maximum array
GsmURange[32] of
GsmURange[32]'s
element number is
rncFunction
GsmBARangeNum of effective element
32.
GsmLRange[32]
GsmLRange[32]
and
rncFunction,
number
is
and
GsmURange[32]
are
GsmLRange[32] of
GsmBARangeNum.
[512, 0, 975]
GsmURange[32]'s
both arrays, and the
rncFunction,
effective
maximumelement
array
GsmURange[32] of
number
element is
number is
rncFunction
GsmBARangeNum of GsmBARangeNum.
32. GsmLRange[32]
rncFunction,
GsmLRange[i]
<
and
GsmLRange[32] of
GsmURange[i],
[885, 124, 1023]
GsmURange[32]'s
rncFunction,
i=0...GsmBARangeN
effective element
GsmURange[32] of
um-1 is
number
rncFunction
GsmBARangeNum.
GsmLRange[i] <
GsmURange[i],
i=0...GsmBARangeN
um-1
Band I:
10562..10838
Band II:
9662..9938,
Bit0=0/1: not
412,
437,
462,/
support
UIA1
487,
512,
537,
support
UIA1
562,
587, not
612,
Bit1=0/1:
637,
662,
687/
support UIA2
Band
III:
1162..
support UIA2
1513
Bit2-Bit15:
Band
IV: 1537..
reserved
1738, 1887,
1912, 1937,
1962, 1987,
2012, 2037,
2062, 2087
Band I:
V:
10562..10838
4357..4458,
1..8 II:
Band
1007,
1012,
9662..9938,
1032, 1037,
412,
462,
1062,437,
1087
487,
Band512,
VI: 537,
562,
587, 612,
4387..4413,
637,
687
1037,
1062
1..10662,
Band III:
VIII:1162..
1513
2937.. 3088
BandIV: 1537..
1738, 1887,
1912, 1937,
1962, 1987,
2012, 2037,
2062, 2087
Band V:
4357..4458,
1..0xfffd,
0xffff
1007,
1012,
1032, 1037,
1062, 1087
Band VI:
4387..4413,
1037,
0..9991062
Band VIII:
2937.. 3088
Luarfcn[8] and
N/A
Uuarfcn[8] are both
arrays, and the
maximum array
FDDFreqRngNum of
element number is 8.
rncFunction, Luarfcn[8] Luarfcn[8] and
of rncFunction,
Uuarfcn[8]'s effective
Uuarfcn[8] of
element number is
rncFunction
FDDFreqRngNum.
Luarfcn[i] <
Uuarfcn[i],
i=0...FDDFreqRngNu
N/A
N/A
m-1
N/A
0x01: Support
UIA1
N/A
10562..9662
N/A
N/A
N/A
[10838, 9938]
N/A
N/A
N/A
460
MCC of R8LcSnac,
MNC of R8LcSnac
N/A
0..999
N/A
N/A
MCC of R8LcSnac,
MNC of R8LcSnac
N/A
0-65535
N/A
N/A
MCC of R8LcSnac,
MNC of R8LcSnac,
SNAC of R8LcSnac
N/A
0..9
N/A
N/A
N/A
N/A
0..10, 0 means
no extend
information
N/A
N/A
N/A
N/A
N/A
Luarfcn[8] and
N/A
Uuarfcn[8] are both
arrays, and the
maximum array
FDDFreqRngNum of
element number is 8.
rncFunction, Luarfcn[8] Luarfcn[8] and
of rncFunction,
Uuarfcn[8]'s effective
Uuarfcn[8] of
element number is
rncFunction
FDDFreqRngNum.
Luarfcn[i] <
Uuarfcn[i],
MCC of R8LcSnac,
i=0...FDDFreqRngNu
MNC of R8LcSnac,
N/A
m-1
LAC of R8LcSnac
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
0: Dense City
Zone
1: Generic City
Zone
2: Suburb
3: Country
N/A
N/A
0: Supported; 1:
N/A
Not Supported
0: False
Band
1: TrueI:
10562..10838
Band II:
Bitstring(16)
9662..9938,
Bit0:
AC0,462,
Bit1:
412, 437,
AC1,
..,
Bit15:
487, 512, 537,
AC15,
562, 587, 612,
0:
Barred
637,
662, 687
1:
NotIII:
Barred
Band
1162..
1513
Band V: 4357...
4458, 1007,
1012, 1032,
1037, 1062,
1087
0: Not
Band
VI:
Supported
4387
...4413,
1: Supported
1037, 1062
Band
VIII:
0:
Band
I
2937..3088
1: Band II
0xff
means
2: Band
III
invalid.
3:
Band IV
4: Band V
5: Band VI
7: Band VIII
N/A
N/A
N/A
N/A
N/A
DUARFCN>UUARFC
N, and
if FreqBandInd is
N/A
N/A
N/A
0(Band I), then
DUARFCN shall be
Band
1(10562..10838), and
UUARFCN=DUARFC
Dense City Zone N/A
N/A
N-950.
if FreqBandInd is
1(Band II), then
DUARFCN shall be
Band 2(9662..9938,
412,
Not Supported
N/A
N/A 437, 462, 487,
512, 537, 562, 587,
612, 637, 662, 687),
and
UUARFCN=DUARFC
N-400.
1: True
N/A
N/A
if FreqBandInd is
2(Band III), then
DUARFCN shall be
Band 3(1162.. 1513),
and
Not Barred(N=0...15)
N/A
N/A
UUARFCN=DUARFC
N-225.
if FreqBandInd is
4(Band V), then
FreqBandInd of
DUARFCN shall be
utranCell, UUARFCN of
Band 5(4357... 4458 ,
utranCell, DUARFCN of
1007, 1012, 1032,
utranCell
1037, 1062, 1087),
and
UUARFCN=DUARFC
N-225.
N/A
if FreqBandInd is
5(Band VI), then
DUARFCN shall be
Band 6(4387 ...4413,
1037, 1062), and
N/A
N/A
UUARFCN=DUARFC
N-225.
if FreqBandInd is
7(Band VIII), then
DUARFCN shall be
Band 8(2937..3088),
and
UUARFCN=DUARFC
N-225.
if FreqBandInd is
3(Band IV), then
DUARFCN shall be
0: Not Support
HSUPA and
HSDPA;
1: Support
HSDPA and
DCH;
2: Support
HSDPA only;
3: Support
HSUPA ,
HSDPA and
DCH;
4: Support
1..0xfffd,and
0xffff
HSUPA
HSDPA
0x0..0x0fffffff
N/A
Support HSUPA , HSDPA

N/A
and DCH
N/A
N/A
OMCR:
(0.0..50.0)dBm,
step 0.1dBm;
dBm
RNC: D=P*10,
0..500
0:
Not Support;
1: Support
MBMS and not
N/A
MBMS;
2: Only Support
MBMS
N/A
MCC of utranCell, MNC

LAI = MCC + MNC +
of utranCell, LAC of
LAC
utranCell
N/A
N/A
43dBm
N/A
0: Not Support
ProVer of LocRnc,
CMbms
SccpchCfgScene of
vsDataUtranCellFDD
If ProVer of LocRnc is
"10(R98)"
or
N/A
"20(R99)" or "30(R4)"
or "40(R5)",
MbmsSuptInd can
only be set to
"0".Only when
N/A
MbmsSuptInd of
UtranCell is "1", the
paramenters of
CMbms are valid.
If MbmsSuptInd of
vsDataUtranCellFD is
1 or2,
SccpchCfgScene of
vsDataUtranCellFDD
can only be set to the
value
N/A among 4-7; If
MbmsSuptInd of
vsDataUtranCellFD is
0, SccpchCfgScene
of
vsDataUtranCellFDD
N/A
can only be set to the
value among 0-3.
0..999
N/A
460
N/A
0..999
N/A
N/A
N/A
3..127
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
NodebNo of utranCell,
CId ofutranCell
Cell number can't

exceed 36 belongs to
a NodeB
1..256
N/A
N/A
N/A
1..256
N/A
70
N/A
N/A
1..6
N/A
N/A
N/A
N/A
N/A
1..4
N/A
SharedNetMode of
rncFunction
if SharedNetMode is
0xFF or 2, the
PlmnNum must be 1
SIB6Ind
If SIB6Ind is False,
PrachSib6Pre must
be False.
0..511, 0xffff
N/A
N/A
N/A
0..255
N/A

RAI = MCC + MNC +
utranCell, RAC of
LAC+ RAC
utranCell
0..4095
N/A
N/A
N/A
N/A
N/A
SACBPre of utranCell,
SACB of utranCell,
utranCell,
SACB is valid if
SACBPre=TRUE
BC's SAI = MCC +
MNC + LAC+ SACB
N/A
N/A
0..65535
N/A
0..65535
N/A

CS+PS's SAI = MCC
+ MNC + LAC+
utranCell, SACPC of
SACPC
utranCell
1...6
N/A
N/A
N/A
N/A
0: Not Support;
1: Support
N/A
Not Support
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: Supported; 1:
N/A
Not Supported
Not Supported
N/A
OMCR:
(0..9*256)chip;
RNC: 0..9
N/A
0 chip
N/A
N/A
N/A
URANum of R6SrvCel,
URA[4] of R6SrvCel
N/A
N/A
URANum of R6SrvCel,
URA[4] of R6SrvCel
N/A
FreqBandInd of
utranCell, UUARFCN of
utranCell, DUARFCN of
utranCell
N/A
25
PLmnNum of utranCell
N/A
Not
N/A
Barred(N=0...15)
Band I:
9612..9888
0..65535
Band
II:
9262..9538, 12,
37, 62, 87, 112,
137, 162, 187,
212, 237, 262,
1..
287MAX_URA,
MAX_URA=4
Band III:
937..1288
Band IV: 1312..
1513, 1662,
1687, 1712,
1737, 1762,
1787, 1812,
1837, 1862
Band V:
4132..4233,
0..100
782,
787, 807,
812, 837, 862
Band VI:
Bitstring(16)
4162AC0,
... 4188,
Bit0:
Bit1:
812, 837
AC1,
.., Bit15:
Band VIII:
AC15,
2712
..2863
0: Barred
1: Not Barred
DUARFCN>UUARFC
N, and
if FreqBandInd is
N/A
0(Band I), then
DUARFCN shall be
Band
1(10562..10838), and
UUARFCN=DUARFC
N/A
N-950.
if FreqBandInd is
1(Band II), then
DUARFCN shall be
Band 2(9662..9938,
412,
N/A 437, 462, 487,
512, 537, 562, 587,
612, 637, 662, 687),
and
UUARFCN=DUARFC
N-400.
N/A
if FreqBandInd is
2(Band III), then
DUARFCN shall be
Band 3(1162.. 1513),
and
N/A
UUARFCN=DUARFC
N-225.
if FreqBandInd is
4(Band V), then
DUARFCN shall be
Band 5(4357... 4458 ,
1007, 1012, 1032,
1037, 1062, 1087),
ACCESSPERCENT
and
is
array, the valid
UUARFCN=DUARFC
number
N-225. is PLmnNum,
the
sum of validis
if FreqBandInd
elements
must
5(Band VI),
thennot be
0
DUARFCN shall be
Band 6(4387 ...4413,
1037, 1062), and
N/A
UUARFCN=DUARFC
N-225.
if FreqBandInd is
7(Band VIII), then
DUARFCN shall be
Band 8(2937..3088),
and
UUARFCN=DUARFC
N-225.
if FreqBandInd is
3(Band IV), then
DUARFCN shall be
0..65534
0:
False
Enum
value: 0
1:
True
R99 Signal R99
1 HSDPA Signal
HSDPA
2 HSUPA Signal
0.. 2^32-1
HSUPA
3 R99 AMR R99
AMR
4
AMR
0:HSDPA
Neighbor
HSDPA
AMR
1: Overlap
2: Covers
5
AMR
3:HSUPA
Contained
in
HSUPA AMR
6 R99 Video
R99
enum: 0-255
7 HSDPA Video
HSDPA
8 HSUPA Video
HSUPA
9 R99 CS
0-4095
conversational
10 R99 CS
streaming
11 R99 PS
conversational
enum:
12
R990-255
PS
streaming
13 R99 PS
interactive high
priority
14
R990-255
PS
enum:
interactive
middle priority
15 R99 PS
interactive low
priority
1-32
16 R99 PS
background
17 HSDPA
conversational
18 HSDPA
streaming
HSDPA
19 HSDPA
Enum
value:
interactive
high
SigDBS_TBEAR
priority HSDPA
ERTYPE_ATM:
20 HSDPA
ATM(0)
interactive
DBS_TBEARER
middle priority
TYPE_IP:
21 HSDPAIP(1)
interactive low
priority
22 HSDPA
background
23 HSUPA
conversational
24 HSUPA
streaming
HSUPA
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Neighbor
Set as 0 if the
parameter is
invalid, otherwise
set default value
for various
transmission
scenarios: IP: 1
ATM+IP: 3 ATM:
4
N/A
Set as 0 if the
parameter is
invalid, otherwise
set default value
for various
transmission
scenarios: ATM:
0
IP:as
30
ATM+IP:
Set
if the
2
parameter is
invalid, otherwise
set default value
as 1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
17
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Enum value:
DBS_PATHTYP
E_IPDOMAIN1
DBS_PATHTYP
E_IPDOMAIN2
DBS_PATHTYP
Enum value:
E_IPDOMAIN3
DBS_PATHTYP
DBS_PATHTYP
E_IPDOMAIN1
E_ATMRT
DBS_PATHTYP
DBS_PATHTYP
E_IPDOMAIN2
E_ATMNRT1
DBS_PATHTYP
Enum
value:
DBS_PATHTYP
E_IPDOMAIN3
DBS_PATHTYP
E_ATMNRT2
DBS_PATHTYP
E_IPDOMAIN1
DBS_PATHTYP
E_ATMRT
DBS_PATHTYP
E_ATMNRT3
DBS_PATHTYP
E_IPDOMAIN2
DBS_PATHTYP
E_ATMNRT1
DBS_PATHTYP
Enum
value:
E_ATMMIX
DBS_PATHTYP
E_IPDOMAIN3
DBS_PATHTYP
0-Invalid
E_ATMNRT2
DBS_PATHTYP
E_IPDOMAIN1
DBS_PATHTYP
E_ATMRT
DBS_PATHTYP
E_ATMNRT3
DBS_PATHTYP
E_IPDOMAIN2
DBS_PATHTYP
E_ATMNRT1
DBS_PATHTYP
Enum
value:
E_ATMMIX
DBS_PATHTYP
E_IPDOMAIN3
DBS_PATHTYP
0-Invalid
E_ATMNRT2
DBS_PATHTYP
E_IPDOMAIN1
DBS_PATHTYP
E_ATMRT
DBS_PATHTYP
E_ATMNRT3
DBS_PATHTYP
E_IPDOMAIN2
DBS_PATHTYP
E_ATMNRT1
DBS_PATHTYP
Enum
value:
E_ATMMIX
DBS_PATHTYP
E_IPDOMAIN3
DBS_PATHTYP
0-Invalid
E_ATMNRT2
DBS_PATHTYP
E_IPDOMAIN1
DBS_PATHTYP
E_ATMRT
DBS_PATHTYP
E_ATMNRT3
DBS_PATHTYP
E_IPDOMAIN2
DBS_PATHTYP
E_ATMNRT1
DBS_PATHTYP
E_ATMMIX
DBS_PATHTYP
E_IPDOMAIN3
0-Invalid
E_ATMNRT2
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT
E_ATMNRT3
DBS_PATHTYP
DBS_PATHTYP
E_ATMNRT1
E_ATMMIX
DBS_PATHTYP
0-Invalid
E_ATMNRT2
DBS_PATHTYP
Enum
value: 0E_ATMNRT3
63
DBS_PATHTYP
E_ATMMIX
0-Invalid
N/A
N/A
N/A
N/A
N/A
N/A
N/A
set as
DBS_PATHTYP
E_IPDOMAIN1
when
ProfileIndex
=
or 2, set as
set1 as
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT when
E_IPDOMAIN1
ProfileIndex
when
=3
or 4
ProfileIndex
=
or 2, set as
set1 as
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT when
E_IPDOMAIN1
ProfileIndex
when
=3
or 4
ProfileIndex
=
or 2, set as
set1 as
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT when
E_IPDOMAIN1
ProfileIndex
when
=3
or 4
ProfileIndex
=
or 2, set as
set1 as
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT when
E_IPDOMAIN1
ProfileIndex
when
=3
or 4
ProfileIndex
=
or 2, set as
set1 as
DBS_PATHTYP
DBS_PATHTYP
E_ATMRT when
E_IPDOMAIN1
ProfileIndex
when
=3
or 4
ProfileIndex
= 1 or 2, set as
DBS_PATHTYP
E_ATMRT when
ProfileIndex
=3 or 4
0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0 for Non I/B

service or
HSDPA(TrafficC
ategory set as
N/A
19, 20, 21, 22)
I/B
service
,
0 for
Non I/B
1kbps
for
other
service or
I/B
service
HSUPA(TrafficC
ategory set as
N/A
25, 26, 27, 28)
I/B service ,
1kbps for other
I/B service
0-65535kbps
N/A
N/A
0-65535kbps
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
N/A
default value for

various
transmission
N/A
scenarios: ATM:
0 IP: 3 ATM+IP:
2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
enum:
(1...MAX_BP_S N/A
EGMENT)
N/A
N/A
0-65535
kbps
1 kbps
N/A
N/A
0-65535
kbps
1 kbps
N/A
N/A
0-65535
kbps
1 kbps
N/A
N/A
0-65535
kbps
1 kbps
N/A
N/A
enum: 0-255
N/A
enum:
(1...MAX_BP_S N/A
EGMENT)
enum: 0: DCH
1: HSPA
N/A
2: MBMS
enum:
DBS_TBEARER
TYPE_ATM:
ATM
N/A
DBS_TBEARER
TYPE_IP: IP
0-63
1-255
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0: GWCN
1: MOCN
2: Multi Plmn
N/A
0xFF: No
Shared Network
0xFF: No Shared
N/A
Network
N/A
(1...255)s
10s
N/A
N/A
0-65535
N/A
N/A
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0..65534
N/A
N/A
N/A
0: Inactive
1: Active
N/A
Sccpch_Default
0: Randomaccess in R99
1: Randomaccess in
Common EDCH
N/A
Null
0: Off
1: On
N/A
1: On
N/A
0: Not Support
1: Support
N/A
It can be set to
"Active" only if the
TstdInd of Psch,
TxDivInd of Pcich
NodeBType, TstdInd of
and SttdInd of
Psch, TxDivInd of
Pccpch are set to
Pcpich, SttdInd of
"Active".
Pccpch
It should be set to
"Inactive" is the
NodeBType is set to
"Pico
N/A
N/A Node B".
ULEFACHSupport of
UtranCell
Only valid when

ULEFACHSupport of
UtranCell is" true"
N/A
0: Not Support
1: Support
N/A
N/A
0: Not Support
1: Support
N/A
N/A
1...65535
N/A
50
N/A
N/A
1...65535
20
N/A
N/A
0: Available
Subchannels of
Cell are
Nonconsecutive)
N/A
1: (All
Subchannels of
Cell are
Available)
CellRadius_DefaultN/A
N/A
(0, 1)
Related common
channels will be
deleted and
reestablished.
N/A
0..65534
N/A
CId of UtranCell
CId of AICH must be

the same as the CId
of UtranCell of the
same cell.
132..163
N/A
132
N/A
N/A
68..99
N/A
68
CPCId of Prach
0: Inactive
1: Active
N/A
Inactive
0..512
N/A
16
There are shall be

corresponding
It can be set to CPCId
in
Prach only if the
"Active"
TstdInd of Psch,
TxDivInd of Pcich
and SttdInd of
Psch, TxDivInd of
Pccpch are set to
Pcpich, SttdInd of
"Active".
Pccpch
It should be set to
"Inactive" is the
NodeBType is set to
0<=CodeUptHyA<=D
"Pico Node B".
DpchCodeHy
pchCodeHy
0..512
N/A
16
CodeUptHyA
0<=CodeUptHyA<=D
pchCodeHy
(1..65535)kbps
step 1
kbps
700kbps
N/A
N/A
0: Not Sharing
HsSharMethod
Valid only when

HsSharMethod of the
NodeB that controls
the cell is set to "RNC
Control"
NumofHspdsch,
MinNumofHspdsch
MinNumofHspdsch
<= NumofHspdsch
<=
MaxNumofHspdsch
NumofHspdsch,
MaxNumofHspdsch
MinNumofHspdsch
<= NumofHspdsch
<=
MaxNumofHspdsch
HspaSptMeth
Valid only when the

setting of
HspaSptMeth
supports HSUPA.
HspaSptMeth
Valid only when the

setting of
HspaSptMeth
supports HSUPA.
MinNumofHspdsch,
MaxNumofHspdsch
MinNumofHspdsch
<= NumofHspdsch
<=
MaxNumofHspdsch
0: Not Sharing
1: Sharing
1..15
1..15
N/A
N/A
N/A
1..MAX_NUM_E
AGCH
N/A
where
MAX_NUM_EA
GCH=32
1..
MAX_NUM_ER
GCH_HICH
N/A
where
MAX_NUM_ER
GCH_HICH=32
1..15
N/A
1..32
N/A
2 for the cell supporting

N/A both R99 and HSDPA3
N/A for the cell of HSDPA only
0: Off
1: On
N/A
0: Off
N/A
N/A
0..32
N/A
MbmsSuptInd
Valid only when

MbmsSuptInd is set
to "1"
0: Not Support
1: Support
0: Not Support
CodeReAssPrd,
CodeReAssHy
CodeReAssPrd,
CodeReAssHy are
valid only if
CodeReAssInd is set
to "1: Support".
10s
CodeReAssInd
Valid only when

CodeReAssInd is set
to "1: Support"
2s
N/A
N/A
N/A
N/A
N/A
1: Support
RncEnL2Ind
Valid only when

RncEnL2Ind is set to
1.
N/A
0: Not Support
N/A
N/A
N/A
1: Support
N/A
N/A
N/A
0: Not Support
N/A
N/A
N/A
1: Support
RncEnL2Ind
Valid only when

RncEnL2Ind is set to
1.
N/A
N/A
N/A
0: Off
N/A
N/A
(5...65535)s
s
step 5s
(100..60000)ms,
step 100ms,
when
CodeUptPrdUnit
=ms
ms/s
(1..65535)s,
step 1s, when
CodeUptPrdUnit
=s
0: ms
ms/s
1: s
0: Not Support
1: Support
0: Not Support
1: Support
0: Not Support
1: Support
0: Not Support
1: Support
0: Not Support
1: Support
0: Not
Supported
1: Supported
0: Off
1: On
N/A
0: Off
1: On
Band I:
10562..10838
Band II:
1..500
9662..9938,
412, 437, 462,
487, 512, 537,
562, 587, 612,
637, 662, 687
Band
III: 1162..
0..65534
1513
N/A
0: Off
N/A
N/A
N/A
Band IV: 1537..

1738, 1887,
N/A
1912, 1937,
0:
Band
I
1962,
1987,
1:
Band
II
2012,
2037,
2:
Band
III
2062, 2087
Band V: 4357..
N/A
4458 , 1007,
3: Band
1012,
1032, IV
4:
Band
V
1037,
1062,
5:
Band VI
1087
0:
Non
Preferred
7:
Band
VIII
Band
VI:
Layer
4387 ..4413,
N/A
1:
Preferred
1037,
1062
Layer
Band VIII:
2937..3088
0..65535
N/A
N/A
MbmsSac of MbmsSa,
MCC of MbmsSa, MNC
of MbmsSa, MCC of
UtranCell,
of
MbmsSac MNC
of MbmsSa,
N/A
UtranCell,
RncId
MCC of MbmsSa,ofMNC
UtranCell,
CId
of of
of MbmsSa,
CId
UtranCell, FreqBandInd
MbmsSa,
MbmsSuptInd
of MbmsSa, of
UtranCell,
FreqBandInd of
MbmsSac
of MbmsSa,
N/A
UtranCell, MCC
of
MCC
of
MbmsSa,
UtranCell, MNC of MNC
of
MbmsSa,
CId of
UtranCell,
RncId
of
MbmsSa,
of
UtranCell, DUARFCN
CId of
MbmsSa,
UtranCell, FreqBandInd
of
UtranCell, MCC
MbmsSuptInd
of of
N/A
UtranCell,
MNC
of
UtranCell,
UtranCell, RncId of
UtranCell, CId of
UtranCell,
0: Non Preferred MbmsSuptInd of
MbmsSac of MbmsSa
UtranCell,
Layer
N/A
0..999
N/A
460
0..999
N/A
164
N/A
164
(18, 36, 72, 144) N/A
N/A
18
N/A
MbmsSac of MbmsSa,
MNC of MbmsSa, CId
of MbmsSa, MCC of
UtranCelll, MNC of
UtranCell, RncId of
UtranCell,
of
MbmsSac CId
of MbmsSa,
UtranCell,
MCC of MbmsSa, CId
MbmsSuptInd
of of
of MbmsSa, MCC
UtranCell,
UtranCell, MNC of
UtranCell, RncId of
UtranCell, CId of
UtranCell,
MbmsSuptInd of
UtranCell,
SccpchUsage of
Sccpch; CPCId of
Sccpch
N/A
in
UtranCell. of
FreqBandInd
One
cell can
belong
UtranCell
of the
cells
to
differenttoMBMS
belonging
the
service
area.
same frequency
layer
The
values
of the
sameofMBMS
FreqBandInd
of be
service area must
UtranCell
of
the
cells
the same and equal
belonging
to the
to the FreqBandInd
same
frequency
of MbmsSa.
And layer
the
N/A
of
the same MBMS
corresponding
cells
service
area must
be
must support
MBMS.
the
same
and
equal
The maximum
to
the FreqBandInd
number
of frequency
of
MbmsSa.
the
layers
of the And
same
corresponding
N/A
MBMS
service cells
area
must
is 4 support MBMS.
The
The maximum
value of
MCC+MNC+CId
of
number
of frequency
FreqBandInd
MbmsSa
must
exist
layers
of the
same
determines
the
value
in
UtranCell.
MBMS
area
range
ofservice
DUARFCN
One
cell
can belong
is
as4the
following:
to
different
The
value
The
value of
ofMBMS
service
area.
FreqBandInd
FreqBandInd
determines
the value
The value range
of
range
of DUARFCN
DUARFCN
as the following:
The
of
Bandvalue
I
FreqBandInd
Band I: 10562..10838
The value range of
DUARFCN
Band II
Band II: 9662..9938,
Band
I
412,
437,
462,
487,
One MBMS
SAC
can
Band
I: 10562..10838
512,most
537,
562, one
587,
the
have
612, 637,
662, 687
MBMS
preferred
Band
II
layer .The
operator
Band
2: the
Band II:
III
make
sure
9662..9938,
412,
Band
III: 1162..
1513
frequency
chose
as
437,
462,
487,
512,
the preferred layer
537,
612,
Band562,
IVcan587,
should
cover
the
637,
662,
687
Band IV:
1537..
1738,
whole
MBMS
SAC
1887,
1912, 1937,
N/A
Band
1962, III
1987, 2012,
Band
1162..
1513
2037, III:
2062,
2087
MCC+MNC+CId of
Band
IV
Band
V must exist
MbmsSa
Band
IV:
1537..4458
1738,,
Band
V: 4357..
in
UtranCell.
1887,
1912,
1937,
1007,cell
1012,
One
can1032,
belong
1962,
1987,
2012,
1037,
1062,MBMS
1087
to different
2037,
2062,
service
area.2087of
MCC+MNC+CId
Band VI
MbmsSa
must exist
Band
V
Band
VI:
If
SccpchUsage
of
in
UtranCell.
Band
V:
4357..
4458 ,
4387
..4413,
1037,
Sccpch
iscan
"5: belong
One
cell
1007,
1012, 1032,
1062
Carrying
MCCH
to
different
1037,
1062,MBMS
1087
FACH&R99
service area.FACH,
Band
VIII
not Supporting CBS"
Band
VI
Band
VIII:
or
Band
VI:
2937..3088
"6: Carrying MCCH
4387 ..4413, 1037,
FACH&R99 FACH,
1062
Supporting CBS" or
"7: Carrying MCCH
Band VIII
FACH", then there is
Band VIII:
one
and only one
N/A
2937..3088
Mich
0: Inactive
1: Active
N/A
Inactive
0: Not Sharing
1: RNC Control
N/A
0: Not Sharing
It can be set to
TstdInd of Psch,
TxDivInd of Pcich
and SttdInd of
Psch, TxDivInd of
Pccpch are set to
Pcpich, SttdInd of
"Active".
Pccpch
It should be set to
"Inactive" is the
NodeBType is set to
"Pico
N/A
N/A Node B".
(5...65535)s,
step 5s
20s
HsSharMethod
Valid only when

HsSharMethod is set
to "RNC Control"
NodeBType
It should be set to
"Inactive" is the
NodeBType is set to
"Pico Node B".
0: Inactive
1: Active
N/A
Inactive
0: Inactive
1: Active
N/A
Inactive
NodeBType
It should be set to
"Inactive" is the
NodeBType is set to
"Pico Node B".
0..7
N/A
[0, 0, 0, 0, 0, 0,
0]
N/A
N/A
N/A
PrachType=0: [0,
0, 0];
PrachType=1: [0,
0, 0]
N/A
PrachType=0:
[15, 15, 15];
PrachType=1:
[15, 15, 15]
N/A
PrachType=0:
[15, 15, 15];
PrachType=1:
[15, 15, 15]
N/A
PrachType=0:
111111111111;
PrachType=1:
111111111111
0..15
0..15
Bit string(4)
Bitstring(12)
0..65534
N/A
AsigEndIdx, Signature,
N/A
PermitMaxASC
AsigStIdx, Signature,
PermitMaxASC
AsigStIdx <=
AsigEndIdx.
AsigStIdx [] is an array
N/A
containing up to eight
elements. The number
of valid elements
depends on the value
of PermitMaxASC.
PermitMaxASC
N/A
PreamScraCode,
PrachType
N/A
CId of UtranCell
CId of Prach must be

the same as the CId
of UtranCell of the
same cell.
PrachCPCId of Rach
must exist in Prach.
PrachCPCId of Aich
must exist in Prach.
68..99
N/A
68
PrachCPCId of Rach,
PrachCPCId of Aich
1..8
N/A
N/A
N/A
1..64
N/A
40
N/A
N/A
1..32
N/A
N/A
N/A
PsfNum
PsfNum<=
PermitMaxASC-2;
If PermitMaxASC2<0, PsfNum should
be set to 0.
1.. MAX_ASC
N/A
0..15
N/A
PrachType=0: 0; PrachType=1:
N/A
1
N/A
(-36.0..0.0) dB
step 0.5dB
dB
N/A
(1..8)dB step
1dB
dB
1dB
N/A
N/A
[0.9]
N/A
N/A
0.9..0.2 step 0.1 N/A
0..
N/A
MAX_ASC_PSF
PermitMaxASC of
R6Prach
0: SIB5
1: SIB6
2: SIB5 and
SIB6
SIB5
SIB6Ind
N/A
PsfNum<=
PermitMaxASC-2;
If PermitMaxASC2<0, PsfNum should
be set to 0.
There shall be a SIB5
for each cell. If the
SIB6Ind is set to
True, there must be
SIB6 recode in
PRACH.
Bitstring(16)
N/A
0: Active
1: Inactive
N/A
3..127
N/A
40960.. 2^24-1
N/A
40960.. 2^24-1
N/A
0: Not Used
1: Used
N/A
0: Not Used
1: Used
N/A
The value of
AsigStIdx and
AsigEndIdx should be
PrachType=0: 1111111111111111;
AsigStIdx, AsigEndIdx
PrachType=1: 1111111111111111
smaller than the max
bit index of Signature
whose value is 1.
It should be set to
"Inactive" is the
Inactive
NodeBType
NodeBType is set to
In
the Node
V3 platform,
"Pico
B".
RcpScrEndId >
RcpScrStartId
and
Module of RcpSc
RcpScrEndIdshould have
RcpScrStartId
Module of NdbAlc
corresponding
>50000
and
Module
the same
In
the V3of
platform,
Segments
of >
value in NdbAlc.
RcpScrEndId
scrambling
codes
RcpScrStartId
andof
different RCPs can
RcpScrEndId90960(V3)
not
overlap.
RcpScrStartId
RcpScrStartId
400960(V4)
In
the
V4and
platform,
>50000
RcpScrEndId
Segments of >
RcpScrStartId
andof
scrambling codes
RcpScrEndIddifferent RCPs can
RcpScrStartId
not
overlap.
40960
RcpScrEndId
>360000
In the V4 and
platform,
Segments
of >
RcpScrEndId
scrambling
codes
RcpScrStartId
andof
different
RCPs
RcpScrEndId- can
not
overlap.
RcpScrStartId
Not Used
N/A
N/A
>360000
and
Segments of
scrambling codes of
different RCPs can
not overlap.
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Used
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
0: Not Used
1: Used
N/A
Used
N/A
N/A
0: Not Used
1: Used
N/A
Used
N/A
N/A
0: Not Used
1: Used
N/A
Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
0: Not Used
1: Used
N/A
Not Used
N/A
N/A
CId of Scpich must

be the same as the
CId of UtranCell of
the same cell.
0..65534
N/A
CId of UtranCell
36..67
N/A
36
N/A
0: Inactive
1: Active
N/A
Inactive
60
N/A
It can be set to
TstdInd of Psch,
TxDivInd of Pcich
and SttdInd of
Psch, TxDivInd of
Pccpch are set to
Pcpich, SttdInd of
"Active".
Pccpch
It should be set to
"Inactive" is the
NodeBType is set to
"Pico
N/A
N/A Node B".
1...10, step 1
s
0: Switch On
Cell Restriction
by OMCR
1: Switch On
Cell Restriction
N/A
by OMCR
2: RNC Controls
Dynamically Cell
Restriction
0: Not Polling
1: Polling
N/A
CellBarPollingSwh
Valid only when

CellBarPollingSwh is
set to "Polling"
0: Switch Off Cell

Restriction by
CellBarPollingSwh
OMCR
CellBarPollingSwh is
valid only when
CellBarAcSwh of
R6CelInfo is not "0"
0: Not Polling
CellBarAcSwh
Valid only when

CellBarAcSwh of
R6CelInfo is not "0"
1..10, step 1
N/A
0: Switch Off CS
Domain DSAR
by OMCR
1:
On CS
0: Switch
Not Polling
Domain
DSAR
1: Polling
N/A
by OMCR
2: RNC Controls
Dynamically CS
Domain DSAR
(According to
N/A
Accessibility of
Iu)
3: RNC Controls
Dynamically CS
Domain DSAR
(According to
Load of Iu or
Accessibility of
Iu)
CSDsarPollingSwh
Valid only when

CSDsarPollingSwh is
set to "Polling"
0: Not Polling
CSDsarSwh
1...65535s, step
s
1s
0: Switch Off CS
CSDsarPollingSwh,
Domain DSAR
PagingLocaBarSwh
by OMCR
Valid only when

CSDsarSwh is not 0
CSDsarPollingSwh is
valid only when
CSDsarSwh of
R6CelPlmn is not 0.
PagingLocaBarSwh
is valid only when
CSDsarSwh or
PSDsarSwh is not "0"
0: Not
Supported
1: Supported
N/A
0: P-CPICH + PCPICH
N/A
1: P-CPICH + SCPICH
0: Not
Supported
1: Supported
1...127
0...MAX_NUM_
0:
Allow UEs to
OCNS_CODE
Respond
to
where
Paging
Message
MAX_NUM_OC
and
Initiate =
the
NS_CODE
30
Location/Registr
ation
1: Restrict UEs
from
Responding to
Paging Message
and Initiating the
Location/Registr
1..10, step 1
ation
0: Switch Off PS
Domain DSAR
by OMCR
1:
On PS
0: Switch
Not Polling
Domain
DSAR
1: Polling
by OMCR
2: RNC Controls
Dynamically PS
Domain DSAR
(According to
Accessibility of
Iu)
3: RNC Controls
Dynamically PS
Domain
DSAR
0:
Not Support
(According
1: Support to
Load of Iu or
Accessibility of
Iu)
N/A
N/A
TstdInd of Psch;
TxDivInd of Pcpich;
0: P-CPICH + PSttdInd of Pccpch;
CPICH
MimoSuptInd;
ScpichSupInd
TstdInd of Psch;
TxDivInd of Pcpich;
0: Not Supported SttdInd of Pccpch;
MimoPilotMode;
SttdMimoBindInd
N/A
N/A
N/A
N/A
N/A
0: Allow UEs to
Respond to
Paging Message CSDsarSwh,
and Initiate the
PSDsarSwh
Location/Registr
ation
N/A
N/A
0: Not Polling
N/A
N/A
PSDsarPollingSwh of
R6Cellnfo
TstdInd of Psch,
TxDivInd of Pcpich,
SttdInd of Pccpch
should
be set to
N/A
"Inactive" if
MimoSuptInd is set to
"Supported" and
TstdInd
of Psch, is set
MimoPilotMode
TxDivInd
of Pcpich,
to "P-CPICH
+ SN/A
SttdInd
of
CPICH"; Pccpch
should
be set to
MimoPilotMode
"Inactive"
should be ifset to "PMimoSuptInd
is setifto
CPICH+S-CPICH"
"Supported"
MimoSuptIndand
is set to
MimoPilotMode
is set
"Supported".
to "P-CPICH + SCPICH";
MimoPilotMode
should be set to "PMimoPilotMode
CPICH+P-CPICH" if
should
be set to
ScpichSupInd
is "Pset
CPICH+S-CPICH"
to "Not Supported".if
MimoSuptInd
is set to
And if
"Supported".
MimoPilotMode is set
to "P-CPICH+PIf
VamSupInd is set
CPICH",
N/A
to
"Supported",can be
ScpichSupInd
MimoSuptInd
can be
only set to "Not
set
to
"Supported"
Supported"
only if
SttdMimoBindInd is
set
N/Ato "Not Bind"
PagingLocaBarSwh
is valid only when
CSDsarSwh or
PSDsarSwh is not "0"
Valid only when
PSDsarPollingSwh is
set to "Polling"
PSDsarPollingSwh is
valid only when
When
PSDsarSwh is not 0
MimoPilotMode
of the
PSDsarPollingSwh
is
configured
cell
is
valid only when "PCPICH
+ S-CPICH",
PSDsarSwh
of
ScpichSupInd
must
PSDsarPollingSwh,
R6CelPlmn is not
0.
0: Switch Off PS Domain DSAR by OMCR be "support".
PagingLocaBarSwh
PagingLocaBarSwh
ScpichSupInd
should
is valid only when
be
"Not Supported"
if
CSDsarSwh
or
MimoPilotMode
is
"PPSDsarSwh is not "0"
CPICH + S-CPICH".
0: Not Support
MimoPilotMode
When ScpichSupInd
is "Not Supported",
MimoPilotMode could
only be set to "PCPICH + P-CPICH".
When
MimoPilotMode is "PCPICH + P-CPICH",
ScpichSupInd could
only be set to "Not
Supported"
PSDsarSwh
OMCR: (0..25.5)
s, step 0.1s;
s
RNC: D=P*10,
0..255
0: Not
Supported
1: Supported
4s
N/A
When ScpichSupInd
in a cell is set to "Not
Supported"
(that is, not support
S-CPICH),
MimoPilotMode
of the cell must be
set to "P-CPICH + PCPICH". On the
contrary, when
MimoPilotMode is set
to "P-CPICH + PCPICH",
N/A
ScpichSupInd
must
be set to "Not
Supported".
If
VamSupInd is set
to "Supported",
If
VamSupInd can
is set
MimoSuptInd
be
to
"Supported",
set to "Supported"
SttdSuptInd
of
only if
UtranCell
should
SttdMimoBindInd be
is
set
set to
to "Not
"Not Bind"
Supported".
N/A
0: Not Bind
1: Bind
N/A
0: Not Bind
MimoSuptInd
0: Not Support
1: Support
N/A
0: Not Support
SttdSuptInd;
MimoSuptInd
0..65534
N/A
N/A
CId of UtranCell
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 3
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 4
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 0
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 5
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 2
0..65535
N/A
UeIntMCfgNote
UeIntMCfgNote of
R7UeInt must be 1
If VamSupInd is set
to "Supported",
MimoSuptInd can be
set
"Supported"
CId to
must
be the
only if as the CId of
same
SttdMimoBindInd
is
UtranCell of the same
set
to
"Not
Bind"
cell.
0: Period Report
Parameters for
TCP in Power
Balance
1:
Report
1: Period
SIR Error
Parameters
for
2: Transmitted
TCP
in
AMR
Code Power or
DASF-PS
or
5: Round Trip
Handover
Time
Control
2: Event A
Report
(10..60000)ms
Parameters
step 1ms for
TCP in DASFPS
3: Event B
Report
(-31..31)dB step
Parameters
for
0.5dB
TCP in DASFPS
4: Period Report
Parameters
(0, 1, 2, 3, 4,for
5,
RTT
6, 7, in
8, LCS
9, 11,
5:
E 19)
13,Event
15, 17,
Report
Parameters for
SIR Error in
Outer Loop
Power Control
6: Event F
Report
RptPrdUnit =1:
Parameters
for
(10..60000)ms
SIR Error
step
10msin
Outer
Loop =2 :
RptPrdUnit
Power
Control
(1..60)min
step
7:
Event
A
min
Report
Parameters for
1:
msin AMR
TCP
2:
8: min
Event B
1:
On Demand
Report
2:
Periodic for
Parameters
3:
Event
A
TCP
in AMR
4:
B
9: Event A
5:
Event
Report C
6:
Event D for
Parameters
7:
Event
TCP
in E
8:
Event F
Handover
(0,
1, 2, 3, 4, 5,
Control
6,
7,
8, 9, 11,
10: Event
B
13,
15, 17, 19)
Report
Parameters for
TCP in
Handover
Control
1..4
N/A
ms
dB
N/A
N/A
ms
N/A
N/A
N/A
N/A
0: UE
Transmitted
N/A
Power
2: UE Rx-Tx
Time Difference
TCP in DASFPS:
PS: Transmitted
100ms
Code
Power
3. Event
E
Period
Report Report
Parameters
Parameters for
for
RTT
in LCS:
0:
Period
Report
SIR
Error
in
Round
Trip Time
Parameters
for
Outer Loop
Event
E
Report
TCP
in
Power
Power Control:
Parameters for
Balance
200ms
NbDMCfgNote of
SIR
ErrorFReport
in
1:
4. Period
Event
NbDed , RptType of
N/A
Outer
Parameters
ReportLoop for NbDed
Power
TCP
in Control:
AMRfor
or
Parameters
SIR
Error
1.
Event
DASF-PS
or
SIR ErrorEin
Event
F Report
Report
Handover
Outer Loop
Parameters
for
Control
Power Control:
RptType of NbDed
N/A
SIR
ErrorAin
2:
Event
200ms
Outer
Loop
Report
5. Event A
Power
Parameters
for
Report Control:
SIR
Error
1dB
TCP
in DASF-PS
Parameters
for
Event
Report
2.
F
RptType of NbDed ,
3:
Event
B
TCP
inAAMR:
Parameters
for DedMeasType of
N/A
Period
Report
Report
100ms
TCP
in AMR:
Parameters
6. Event
B for NbDed
Transmitted
SIR
Error
in
TCP
in Power
DASF-PS
Report
Code
Power
Outer
Loop
Balance:
4:
Period
Report
Parameters
for
Event
Report
Power
Periodic
Parameters
for
TCP inBControl:
AMR:
All
Parameters
for N/A
-1dB
Period
Report
RTT
in
LCS
100ms
measurements:
N/A
TCP
in
AMR:
3.
Other
Parameters
for
5:
Event
E
7.
A
2
Transmitted
measurements:
TCP
in AMR or Report
Code
Power
DASF-PS
orfor
Parameters
Event
Report
Handover
SIR
in
TCPError
inAHandover
Parameters
for DedMeasType of
Control:
Periodic
Outer
Loop
Control:
100ms
NbDed , RptType of
N/A
TCP
inAControl
Handover
Period
Report
Event
Report
Power
8. Event
B
NbDed
Control:
Parameters
6:
Event F for
Report
Transmitted
TCP
in AMRfor
or
Report
Parameters
Code
Power
DASF-PS
or
DASF-PS:
Event
Parameters
for
TCP in Handover
Event
B Report
Handover
A
SIR
Error
in
Control:
100ms
Parameters
for RptType of NbDed
N/A
Control
Event
B:Report
Outer
Loop
9. Other
TCP in Control
Handover
1000ms;
Parameters
for Power
measurements:
Control:
Other
TCP
in AMR
7: Event
A or
Transmitted
measurements:
DASF-PS:
Event
Report
Code
Power2 for
4000ms
B
Parameters
Period
TCP
AMR
ms in Report
RptType of NbDed
N/A
Parameters
8: Event B for
RTT
in LCS:
Report
Periodic
Parameters 2 for
Event
Report
TCP inEAMR
NbDMCfgNote of
Parameters
9: Event A for NbDed, DedMeasType N/A
SIR
Error in
Report
of NbDed
Outer
Loop for
Parameters
Power
TCP in Control:
Handover
Event
ControlE
FilterCoeff is invalid
Event
F Report
10: Event
B
3
MeasQuantity
when MeasQuantity
Parameters
for
Report
is 2.
SIR
Error in for
Parameters
Outer
TCP inLoop
Handover
Power
ControlControl:
Event F
Event
A Report Power
UE
Transmitted
N/A Event Report Parameters
N/A for AMR: 2UE Transmitted Power Eve
Parameters for
TCP in AMR:
RptTxPwrInd must be
Event A
True if MeasQuantity
Event B Report
RptTxPwrInd,
is 0. And
Parameters
for
UE Transmitted Power Event Report Parameters for AMR: UE Transmitted PowerUE Tr
RptTxRxTmDiffInd
RptTxRxTmDiffInd
TCP in AMR:
must be True if
Event B
MeasQuantity is 2.
Event A Report
Parameters for
TCP in Handover
Control: Event A
Event B Report
Parameters for
TCP in Handover
Control: Event B
0:
Acknowledged
Mode RLC
N/A
1:
Unacknowledge
d Mode RLC
(1, 2, 4, 8, 16,
32, 64, Infinity)
(250, 500,
1000, 2000,
3000, 4000,
6000, 8000,
12000, 16000,
20000, 24000,
28000,
1: Event32000,
64000)ms
Reporting
Criteria
2: Periodical
Reporting
Criteria
N/A
ms
N/A
0: False
1: True
N/A
0: False
1: True
N/A
(0, 10, 20, 40,

60, 80, 100,
120, 160, 200,
240, 320, 640,
1280, 2560,
5000)ms
ms
0: UE
(-50,
0)dB,
Transmitted
step1dB
Power Event
Report
Parameters for
AMR
(768..1280)chip
1: UE
sTransmitted
step 1 chip
Power Event
Report
Parameters for
PS
0..65535
2: UE Rx-Tx
Time Difference
Period Report
Parameters for
Location
3: UE Rx-Tx
Time Difference
Event Report
Parameters for
UTRAN
4: UE Rx-Tx
Time Difference
Event Report
Parameters for
RL Timing
Adjustment
5: UE
Transmitted
N/A
chip
N/A
N/A
Report
Parameters for
AMR: UE
UE Transmitted
Transmitted
Power
Power Event
Event
Report
Report
Parameters
Parameters for
for
PS:
- Event
AMR:
AMR:
UE
Rx-Tx Time
Reporting
UE
Transmitted
Acknowledged
Mode
N/ARLC
Difference
Criteria
Power Event
Period
Report
UE
Transmitted
Report
Parameters
Power
Eventfor
Parameters
for
Location:
Infinity
Report
PS: UE
Parameters
for
UE Rx-Tx
Rx-Tx Time
Time
UE
Transmitted
Difference
Event
N/A
PS:
Event
Difference
Power
Event
Report
Reporting
Period Report
Report
Parameters for
for
Criteria
Parameters
Parameters
for
UTRAN:
UE
Rx-Tx-500ms
Time
Location:
AMR:
True
UE
Rx-Tx
Time
Difference
UE Rx-Tx Time
UE
Transmitted
Difference
Event
Period
Report
Difference
Event N/A
UE
Transmitted
Power
Event
Report
Parameters
for
Report
Power
Eventfor
Report
Parameters
Location:
Parameters
for
Report
Parameters
RL
Timing- for
Periodical
UTRAN:
UE
Transmitted
Parameters
for
PS:
True Time
Adjustment:
Reporting
MeasEvtNum,
UE
Rx-Tx
Power
Event
AMR:
False
Rx-Tx
Time
UE
Transmitted
Criteria
MeaEvtId[], TrigTime[],
Difference
Event
Report
UE
Transmitted
Difference
Power
Event
UE
Rx-Tx
Time
Report
Parameters
for PrdRptAmount,
Power
Event
Period
Report
Report
Difference
Event
PrdRptInterval
Parameters
AMR:
[1280,for
Report
Parameters
for
Report
RL
Timing
1280]ms
Parameters
Location:
False
Handover:
- for
Parameters
for
Adjustment:
UE
Transmitted
PS:
False
UE
Rx-Tx
Time
UTRAN:
Event
UE
Transmitted
Power
Event
UE
Rx-Tx
Time
Difference
Event N/A
Reporting
Power
Event
Report
Difference
Report
Criteria
Report
Parameters
for
Period
Report
Parameters
for
UE
Rx-Tx
Time
Parameters
for
PS:
[1280,
UE
Transmitted
Parameters
for
UTRAN:
False
Difference
Event
Handover:
AMR:
[-1,
-2
]dB
1280]ms
Power
Event
Location:
True
UE
Rx-Tx
Time
Report
UE
Transmitted
UE
Rx-Tx
Time
Report
UE
Rx-Tx
Time
Difference
Event
The
default
Parameters
for N/A
Power
Event
Difference
Parameters
for
Difference
Event
Report
configuration
of
RL
Timing
Report
Period
Report
AMR:
[768,
Report
Parameters
for
the
UE
Internal
Adjustment:
Parameters
for
Parameters
for
768]chip
Parameters
for
RL
Timing
Measurement
Event
Reporting
PS:
[-1,
-2
]dB
Location:
UE
Transmitted
UTRAN:
True
Adjustment:
Configuration
Criteria
UE
Rx-Tx
Time
UE
Rx-Tx
Time
Power
Event
UE
Rx-Tx
Time
False
Index
and
the
UE
Transmitted
Difference
Difference
Event N/A
Report
Difference
Event
UE
Transmitted
corresponding
Power
Event
Period
Report
Report
Parameters
Report
Power
Event
functions
arefor
as
Report
Parameters
for
Parameters
for
PS:
[768,
Parameters
for
Report
the
following:
Parameters
for
Location:
UTRAN:
768]chip
RL
Timing[240,
Parameters
for
0:
UE
Handover:
Event
UE
Rx-Tx
Time
240]ms
UE
Rx-Tx
Time
Adjustment:
True
0:
UE
Handover:
True
Transmitted
Reporting
Difference
Event
UE
Rx-Tx
Time
Difference
UE
Transmitted
Transmitted
N/A
Power
Event
Criteria
Report
Difference
Event
Period
Report
Power
Event
Report
Parameters
for
Report
Parameters
for
Report
Parameters
for
UTRAN:
Parameters
for
Location:
Parameters
for
AMR
UE
Rx-Tx
Time
RL
Timing
UE
Rx-Tx Time
Handover:
False
AMR
1:
UE
Difference
Event
Adjustment:
Difference
Event
1:
UE
Transmitted
N/A
Report
[240,
240]ms
Report
Transmitted
Power
Eventfor
Parameters
UE
Transmitted
Parameters
Power
Eventfor
Report
RL
Timing
EvtMeasTP1,
Power
Event
UTRAN:
[1200,
Report
Parameters
for
Adjustment:
Report
800]chip
Parameters
for PsEvtMeasTP1,
PS
UE
Transmitted
Parameters
for PrdMeasRTT,
UEUE
Rx-Tx
Time
PS
2:
Rx-Tx
Power
Event
EvtMeasRTT1,
Handover:
[100,
Difference
Event
2:
UEDifference
Rx-Tx
Time
Report
EvtMeasRTT2,
240]ms
Report
Time
Difference
Period
Report
Parameters
for
HoEvtMeasTP,
Parameters
for
Period
Report
Parameters
for
Handover:
[0,
RL
Timing for UeIntMCfgNote
Parameters
Location
-1]dB
Adjustment:
Location
3: UE Rx-Tx
[1200,
800]chip UeIntMCfgNo,
3:
UEDifference
Rx-Tx
Time
MeasQuantity , RptCrt
UE
Transmitted
Time
Difference
Event
Report
Power
Eventfor
Event
Report
Parameters
Report
Parameters
for
UTRAN
Parameters
UTRAN
4: UE Rx-Txfor
Handover:
[768,
4:
UEDifference
Rx-Tx
Time
768]chip
Time
EventDifference
Report
Event
Reportfor
Parameters
Parameters
RL Timing for
RL
Timing
Adjustment
Adjustment
5: UE
5:
UE
Transmitted
Transmitted
N/A
N/A
N/A
1. MeasEvtNum,
MeaEvtId[],
TrigTime[]is valid only
if RptCrt is 1;
2. PrdRptAmount,
PrdRptInterval is
valid only if RptCrt is
2
N/A
N/A
N/A
N/A
N/A
1. Each value of
UeIntMCfgNote
EvtMeasTP1
should have a
PsEvtMeasTP1
corresponding
PrdMeasRTT
UeIntMcfgNo.
EvtMeasRTT1
2. When
EvtMeasRTT2
UeIntMCfgNote is
HoEvtMeasTP
must
0/1/5, MeasQuantity
exist
in
the
R7CUeInt
must be 0 and RptCrt
must be 1.
When
UeIntMCfgNote is 2,
MeasQuantity must
be 2 and RptCrt must
be 2.
When
UeIntMCfgNote is
3/4, MeasQuantity
must be 2 and RptCrt
must be 1.
(-6 .. 0)dB
step1dB
0: Not Support
1: Support
0: Macro Cell
1: Normal Cell
2: Micro Cell
dB
0dB
N/A
N/A
N/A
0: Not Support
N/A
N/A
N/A
N/A
N/A
0: Not Support
N/A
N/A
Apply IMSI
Attach and
Detach
Procedure
N/A
N/A
2: CS +PS
Domain
N/A
N/A
Kcs of R8CnInfo, Kps

of R8CnInfo,
MbmsModPrdCoeff of
R8CnInfo
N/A
N/A
Kcs of R8CnInfo, Kps

of R8CnInfo,
MbmsModPrdCoeff of
R8CnInfo
N/A
N/A
Network Mode of
N/A
Operation II
N/A
hour
1hour
N/A
N/A
15s
N/A
N/A
0: Not Support
N/A
1: Support
0: Not Apply
IMSI Attach and
Detach
Procedure; 1:
N/A
Apply IMSI
Attach and
Detach
0:
CS Domain
Procedure
1: PS Domain
N/A
2: CS +PS
Domain
6..9
6..9
0: Network
Mode of
Operation I; 1:
Network Mode
of Operation II
OMCR: ( 0,
0.1..25.5)hours
Step0.1hour
RNC: D=P*10
(0..255)
1..60s
N/A
Bit0=0/1: not
support UEA0 /
support UEA0
Bit1=0/1: not
support UEA1 /
support UEA1
Bit2=0/1: not
support UEA1 /
support UEA2
Bit2-Bit15:
reserved
(0..15)s
N/A
Bit0=1: support
UEA0
Bit1=1: support
UEA1
Bit2-Bit15: 0
N/A
N/A
5s
N/A
N/A
0..65534
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0: False
1: True
BYTE
0: False
N/A
N/A
0..255
N/A
20
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
V3: 30
V4: 250
N/A
N/A
0..255
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..65535
N/A
80
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65534
N/A
N/A
N/A
N/A
0..65534
N/A
N/A
N/A
N/A
N/A
N/A

of utranCell, RncId of
N/A
utranCell, CId of
utranCell
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65534
0: Not
Supported
1: Supported
0..2^32-1
N/A
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0: False
1: True
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0..10
N/A
N/A
N/A
0..100 Unit:
100ms
100ms
700ms
N/A
N/A
1..50 Unit:
100ms
100ms
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
MCC of LocRnc
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
MNC of LocRnc
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0..4095
N/A
N/A
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
2..3
N/A
N/A
N/A
0: Macro
eNodeB
1: Home
eNodeB
N/A
0: Macro
eNodeB
N/A
N/A
0..2^28-1
N/A
N/A
N/A
N/A
0-65535
N/A
N/A
N/A
N/A
0..65534
N/A
N/A
N/A
N/A
0..2^28-1
N/A
N/A
ENodeBId
N/A
0..2^28-1
N/A
N/A
EUtranCId
N/A
0: False
1: True
N/A
N/A
N/A
N/A
0..255
N/A
N/A
EUtranNbr>NEutranCId
NEUtranCId must
exist in EUtranCId in
EUtranCell MO.
0..503
N/A
N/A
N/A
N/A
0..65534
N/A
N/A
N/A
N/A
0-65535
Erl
N/A
N/A
N/A
0-255
N/A
N/A
N/A
N/A
1..4
N/A
N/A
N/A
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
1..200 Unit:
100ms
100ms
30 (100ms)
N/A
N/A
(1..500) Unit:
100ms
100ms
80 (100ms)
N/A
N/A
(10..200) Unit:
100ms
100ms
100 (100ms)
N/A
N/A
1..10
5s
N/A
N/A
10...100
100ms
50
N/A
N/A
0: Off
1: On
BYTE
0: Off
N/A
N/A
1..500 Unit: 100ms

100ms
200
N/A
N/A
1..500 Unit: 100ms

100ms
50
N/A
N/A
1..500 Unit: 100ms

100ms
50
N/A
N/A
(1..255)
0:
More
0: Not
IMSI-based
than
32
CS & PSByte
1:
Greater than
Coordination
32
Byte and Not
1: Random
More
than 80
0:
3.4K
Selection
Byte
Signalling
2:
1: Greater
13.6K than
80
Byte and Not
Signalling
More
than128
2: 27.2K
Byte
Signalling
3: Greater
than
6.8K
128
Byte and
Signalling
Not More
0:
False Byte
than176
1:
True
4: Greater than
176 Byte and
Not More than
224 Byte
5:
than
0, Greater
10, 20, 50,
224
Byte and
70, 100
Not More than
272 Byte
6: Greater than
272 Byte and
Not More than
320 Byte
7: Greater than
320 Byte and
Not More than
368
Byte
0..255
8: Greater than
368 Byte and
Not More than
416 Byte
9: Greater than
0-10
416 Byte and
Not More than
464 Byte
10: Greater than
464 Byte and
0-10More than
Not
512 Byte
11: Greater than
512 Byte and
Not More than
0-1023,
560 Byte0XFFFF
is
value
12:invalid
Greater
than
560 Byte
30s
N/A
N/A
N/A
0: IMSI-based
CS & PS
Coordination
SharedNetMode of
rncFunction
N/A
BYTE
0: 3.4K
Signalling
N/A
N/A
BYTE
0: False
N/A
N/A
BYTE
N/A
N/A
BYTE
Not More than

32 Byte
N/A
N/A
BYTE
56
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0xFFFF
R_IuInfo->-CsNri
0-1023, 0XFFFF
N/A
is invalid value
0xFFFF
R_IuInfo->-PsNri
Except invalid
value(0XFFFF), the
parameter value can't
equal with CsNri that
configured in
R_IuInfo.
Except invalid
value(0XFFFF), the
parameter value can't
equal with PsNri that
configured in
R_IuInfo.
0..65535
N/A
CIntraDefault
0..65535
N/A
CIntraDefault
0..65535
N/A
CIntraDefault
0..65535
N/A
CIntraDefault
0..65535
N/A
CIntraDefault
0..65535
N/A
CIntraDefault
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
Intra, TrfCategory of
CIntra
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
CIntra
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
CIntra
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
CIntra
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
CIntra
IntraMeasCfgNo of
Intra,
IntraMeasCfgNote of
CIntra
N/A
N/A
N/A
N/A
N/A
N/A
0: Serial1: ParallelN/A
Parallel
N/A
N/A
0: Serial1: ParallelN/A
1: Parallel
N/A
N/A
(0..65535)s step 1s
0s
N/A
N/A
(1[0], 2[1], 4[2],

8[3], 16[4],
N/A
32[5], 64[6],
Infinity[7])
(0[0], 250[1],
500[2], 1000[3],
2000[4],
ms
4000[5],
8000[6],
16000[7])ms
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
When RptCrt is 1
(Event Reporting
Criteria) and
MeaEvtId is
1a/1b/1c/1j,
EvtRptAmount is
When
valid. RptCrt is 1
(Event Reporting
Criteria) and
MeaEvtId is
1a/1b/1c/1j,
EvtRptIntervalis valid.
(0[0], 1[1], 2[2],

3[3], 4[4], 5[5],
6[6], 7[7], 8[8],
9[9], 11[10],
13[11], 15[12],
17[13], 19[14])
(0..7.5)dB step
0:
Period Report
0.5dB
Parameters for
CPICH Ec/No
2: UE Event
Report
Parameters
for
0..65535
CPICH Ec/No
5: Period Report
Parameters for
CPICH RSCP
7: UE Event
Report
Parameters for
CPICH RSCP
10: Detected
1a[0],
Set 1b[1],
1c[2],
1d[3],
Measurement
1e[4],
1f[5], 1j[6]
Parameters
for
CPICH Ec/No
1..MAX_INTRA_
11: Detected Set
MEAS_EVENT
Measurement
Where
Parameters for
MAX_INTRA_M
CPICH
RSCP
EAS_EVENT
=7.
N/A
Intra_Default
N/A
Intra_Default
N/A
Intra_Default
N/A
Intra_Default
N/A
Intra_Default
N/A
Intra_Default
0: CPICH Ec/No
1: CPICH RSCP
N/A
2: Pathloss
(1[0], 2[1],
4[2],
(250[1],
500[2],
8[3],
16[4],
1000[3],
32[5],
64[6],
2000[4],
Infinity[7])
3000[5],
4000[6],
6000[7],
8000[8],
12000[9],
16000[10],
20000[11],
24000[12],
28000[13],
(0,
1, 2, 3, 4, 5,
32000[14],
6, 7)
64000[15])ms
1: Event
Reporting
Criteria
2: Periodical
Reporting
Criteria
Intra_Default
N/A
Intra_Default
ms
Intra_Default
N/A
Intra_Default
N/A
Intra_Default
MeaEvtId[]
is an
When
array.
The maximum
IntraMeasCfgNote
is
amount
elements
0(PeriodofReport
is
7 and the for
number
Parameters
of
valid Ec/No),
elements is
CPICH
MeasEvtNum.
MeasQuantity is
When
RptCrt
is and
0(CPICH
Ec/No),
1(Event
RptCrt isReporting
2(Periodical
Criteria)and
Reporting Criteria);
MeaEvtId
is 1a/1b,
When
N/A
N/A
RptRange[]
is validis
IntraMeasCfgNote
When
RptCrt
is of
According
to
2(UE
Event
Report
For each value
1(Event
Reporting
IntraMeasCfgNote,
Parameters
for
IntraMeasCfgNote ,
Criteria)and
When
RptCrt
the
values
of
CPICH
Ec/No),
there
must
beisat1least
MeaEvtId
is 1a/1b,
(Event
Reporting
MeasQuantity
and
is
IntraMeasCfgNo
of
one
corresponding
RptCrt of Intra
W[]
is valid
Criteria),
Hysteresis
RptCrt
are
as follows,
0(CPICH
Ec/No),
Intra:
IntraMeasCfgNo
inand
is
is
valid.RptCrt
When
RptCrt
is 1(Event
IntraMeasCfgNote of
Intra.
1(Event
Reporting
IntraMeasCfgNote
Reporting
Criteria);
Intra
IntraMeasCfgNo
ofis
Criteria)and
0(Period
Report
When
IntraMeasCfgNo of
Inter must have the
is for
1e/1f, is
Parameters
IntraMeasCfgNote
Inter: IntraMeasCfgNo MeaEvtId
corresponding
ThreshUsedFreq[]
is
CPICH
Ec/No),
5(Period
Report with
of Intra
IntraMeasCfgNo
valid,
and
the
range
MeasQuantity
is
Parameters
for in
IntraMeasCfgNo of
the same value
is
as follows,
0(CPICH
Ec/No), and
CPICH
RSCP),
SysMC:
Intra.
ifMeasQuantity
MeasQuantity
RptCrt
is 2(Periodical
is isof
IntraMeasCfgNo of
IntraMeasCfgNo
CPICH
RSCP,
Reporting
Criteria);
IntraMeasCfgNo
of
1(CPICH
RSCP),
Intra
SysMC must haveand
is(When
Intra, MeasQuantity of ThreshUsedFreq
RptCrt
is 2(Periodical
the corresponding
RptCrt
of
Intra,
115..-25
)dBm;
if
IntraMeasCfgNote
is
Intra, RptCrt of Intra
Reporting
Criteria);
IntraMeasCfgNo
with
MeasEvtNum of Intra, 2(UE
MeasQuantity
is
Event
Report
When
the same value in
RptRange[] of Intra, W[] Parameters
CPICH
for
IntraMeasCfgNote
is
Intra. Ec/No,
of Intra,
ThreshUsedFreq
is(CPICH
Ec/No),
7(UE Event
Report
ThreshUsedFreq[] of
24..0)
dB; if foris
MeasQuantity
Parameters
Intra, RptDeactThr[] of MeasQuantity
is and
0(CPICH
Ec/No),
CPICH RSCP),
Intra, RplcActThr[]of
Pathloss
,
RptCrt
is
1(Event
MeasQuantity
According
to is
Intra, EvtRptAmount[]of Reporting
ThreshUsedFreq
Criteria);and
1(CPICH
RSCP),
IntraMeasCfgNote,
Intra, EvtRptInterval[]of When
is(30..165)dB.
RptCrt
is 1(Event
Onlyvalues
valid
when
the
of
Intra
When
RptCrt
isand is
IntraMeasCfgNote
Reporting
Criteria);
event
reporting
MeasQuantity
RptCrt of Intra
1(Event
5(Period
Report
When are
criteria
isReporting
used
for the
RptCrt
as follows,
Criteria)and
Parameters
for
IntraMeasCfgNote
is
measurement.
When
MeaEvtId
is 1a,
CPICH
RSCP),
10(Detected
Set is
IntraMeasCfgNote
RptDeactThr[]is
MeasQuantity
is valid
Measearment
0(Period Report
When
RptCrt
is
1(CPICH
RSCP),
Configuration
Index
Parameters for and
IntraMeasCfgNote of
1(Event
Reporting
RptCrt
isEc/No),
2(Periodical
for CPICH
Ec/No),
CPICH
Intra, RptCrt of Intra
Criteria)and
MeasQuantity
is
MeaEvtId
is 1c/1J,and
When
0(CPICH
Ec/No),
RplcActThr[]is
valid;is
IntraMeasCfgNote
1(Event
RptCrt is 2(Periodical
and
when
MeaEvtId
7(UE
Event
Report
Reporting
Criteria);
Only valid for
RptCrt of Intra,
is
1J, RplcActThr
Parameters
for is 0,
When
periodical
PrdRptInterval of Intra IntraMeasCfgNote
1,
2,
3,
or
4.
CPICH
RSCP),
is
measurement.
When
RptCrtReport
isis
MeasQuantity
11(Detected
Set
2(UE
Event
1(Event
Reporting
1(CPICH
RSCP),
Measearment
Parameters
for and
Criteria)and
RptCrt
is
1(Event
Configuration
Index
CPICH
Ec/No),
Only
valid
for
MeaEvtId
Reporting
Criteria);
for
CPICHis
RSCP),
RptCrt of Intra,
MeasQuantity
is
periodical
1a/1b/1c/1j,
MeasQuantity
is and
PrdRptAmount of Intra When
0(CPICH
Ec/No),
measurement.
EvtRptAmount[]is
IntraMeasCfgNote
is
1(CPICH
RSCP),
RptCrt
is
1(Event
When RptCrt is and
valid
10(Detected
Set
RptCrt
is
1(Event
Reporting
Criteria);
1(Event Reporting
When
RptCrt
is
Measearment
Reporting
Criteria)
When
Criteria)and
1(Event
Reporting
Configuration
Indexis
IntraMeasCfgNote
RptCrt of Intra,
MeaEvtId is 1c/1J,
Criteria)and
for
CPICH
Ec/No),
5(Period
Report
MeaEvtId of Intra
RplcActThr
is valid;
MeaEvtId
is foris
MeasQuantity
Parameters
and when MeaEvtId
1a/1b/1c/1j,
0(CPICH
Ec/No), is
and
CPICH
RSCP),
is 1J, RplcActThr
0,
EvtRptInterval[]is
RptCrt
is
1(Event
MeasQuantity
is
1, 2, 3, or 4.
valid
Reporting
Criteria);and
IntraMeasCfgNote of
1(CPICH RSCP),
When
Intra, MeasQuantity of RptCrt is 2(Periodical
IntraMeasCfgNote
Intra
Reporting Criteria);is
11(Detected Set
When
Measearment
IntraMeasCfgNote
is
Configuration
Index
7(UE
Event Report
for
CPICH RSCP),
Parameters
for
MeasQuantity
CPICH RSCP),is
1(CPICH
RSCP),
MeasQuantity
is and
RptCrt is 1(Event
1(CPICH
RSCP), and
Reporting
Criteria)
RptCrt
is 1(Event
When
IntraMeasCfgNote is
(0, 1, 2, 3, 4, 5,
6, 7)
N/A
(0..14.5)dB step
dB
0.5dB
CPICH RSCP: (115..-25) dBm
CPICH Ec/No: (24..0) dB
N/A
(0[0],
10[1],
Pathloss:
20[2],
40[3],
(30..165)
dB
60[4], 80[5],
100[6], 120[7],
160[8], 200[9],
ms
240[9], 320[10],
640[11],
1280[12],
2560[13],
5000[14])ms
(0.0..2.0)
step
N/A
0.1
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
Intra_Default
RptCrt of Intra
Intra_Default
RptCrt of Intra,
MeaEvtId of Intra
CId of utranCell
0..65534
N/A
0: Off
1: On
N/A
LoadBalance_Default
N/A
When RptCrt is
1(Event Reporting
Criteria)and
MeaEvtId
is 1a,
When
RptCrt
is
RptDeactThr
is valid.
1(Event
Reporting
Criteria)and
When RptCrt is
MeaEvtId
is 1e/1f,
1(Event Reporting
ThreshUsedFreq
is
Criteria)and
valid
and
the
range
MeaEvtId is 1a/1b, is
as
follows, is valid.
RptRange
if MeasQuantity is
CPICH RSCP,
ThreshUsedFreq is (115..-25 )dBm;
if MeasQuantity is
CPICH Ec/No,
ThreshUsedFreq
When RptCrt is is (24..0) dB;
1(Event
Reporting
ifCriteria),
MeasQuantity
is is
TrigTime
Pathloss
,
valid.
ThreshUsedFreq is
(30..165)dB
When
RptCrt is
1(Event Reporting
Criteria)and
MeaEvtId is 1a/1b, W
is valid.
This parameter
equals to Cid in
utranCell.
N/A
For each value of

IntraMeasCfgNote ,
there
must be at least
This parameter
IntraMeasCfgNo
of
one
corresponding
0..65534
N/A
CId of utranCell
equals to Cid in
Intra:
IntraMeasCfgNo
in
utranCell.
IntraMeasCfgNote of
Intra.
Intra
IntraMeasCfgNo of
IntraMeasCfgNo of
Inter must have the
Inter: IntraMeasCfgNo corresponding
0..65535
N/A
There are 6 sets of measurement parameter are configured for different measurement p
of Intra
IntraMeasCfgNo with
IntraMeasCfgNo of
the same value in
SysMC:
Intra.
IntraMeasCfgNo of
IntraMeasCfgNo of
Intra
SysMC must have
0: Close Load Balance1:
N/A
Open Load
LoadBalance_Default
Balance
N/A
N/Acorresponding
the
IntraMeasCfgNo with
the same value in
Intra.
1..5
N/A
N/A
N/A
1..5
N/A
10..6000 Unit: 100ms

100ms
0...65535
N/A
N/A
N/A
1800
N/A
N/A
N/A
if the value of
IURDCHSDSSUPTIN
D is "False", this
IURDCHSDSSUPTIND
paramater is invalid
for the
correspongding Cell
0: Not Supported1:
N/A
Supported
N/A
INTEGER (0..999)N/A
N/A
PLMNNUM of NodeB
if PLMNNUM=0, this
parameter is invalid
(0...100)%, step by
%0.1%
N/A
PLMNNUM of NodeB
if PLMNNUM=0, this
INTEGER (0..999)N/A
N/A
PLMNNUM of NodeB
Enum (0, 2, 3,
4)
N/A
N/A
MCC4RANSharing
MNC4RANSharing
MinCEPercent
0-999
N/A
460
MCC of LocRnc
0..999
N/A
1..MAX_ARP_S
EGMENT,
N/A
MAX_ARP_SEG
MENT=15
N/A
MNC of LocRnc
BP_Default
ARPSegNum
if PLMNNUM=0, this
parameter
if the valueisofinvalid
this
parameter is 0, the
following three
parameters is invalid:
MCC4RANSharing
[1...PLMNNum],
MNC4RANSharing
[1...PLMNNum],
MinCEPercent[1...PL
the value must exist
MNNum]
in
LocRnc(NeType=RN
C in LocRnc)
the value must exist
in
Mapping BasicPrio,
LocRnc(NeType=RN
all the ARPSeg in
C
in LocRnc)
BasPri
must lie in
[1, .., ARPSegNum],
all the ARPSeg
element in [1, ..,
ARPSegNum] must
have one record in
BasPri.
all these requirement
should be guaranteed
by operator.
all the ARPSeg in

BasPri must lie in
[1, .., ARPSegNum];
TrafficClass lying in
[4, ..,
MAX_THP_SEGMEN
T +3] corresponding
0: Voice
to THPSeg in [1, ..,
1: Video
MAX_THP_SEGMEN
ARPSegNum
2:
Streaming
0..15
N/A
BP_Default
T] in QosSeg.
TrafficClass of BasPri
3: Background
and every
4..MAX_THP_S
combination of
EGMENT+3,
ARPSeg element in
corresponding to
Mapping
BasicPrio,
[1, .., ARPSegNum]
ARPSeg
1:
theSignalling
values of
all
the
ARPSeg in
and
TrafficClass
BP_Default
ARPSegNum
Fixed
Mode, of N/A
THP segment
BasPri
in
elementmust
mustliehave
THPSegNum
Service
Flexible
interactive
[1,
..,
ARPSegNum];
one record in BasPri.
Mode
TrafficClass
lying in
services
2:
Signalling
and
[4,
..,
1..MAX_THP_S
Conversational
MAX_THP_SEGMEN
EGMENT
by operator.
Service
Fixed
N/A
2: Signalling and Conversational
N/A
Service Fixed
T +3]Mode,
corresponding
other Service Flexible Mode
19: Session
Mode,
other
to THPSeg in [1, ..,
Initiation
Service
MAX_THP_SEGMEN
ProtocolFlexible
and
every
Mode
T]
in QosSeg.of
combination
3: All Fixed
ARPSeg element in
Mode
INTEGER (1..1504,
octets
...) unit octets 600
N/A
[1, .., ARPSegNum]
and TrafficClass
element must have
one record in BasPri.
0-999
N/A
460
N/A
Mapping
AppPri, all
by operator.
the BPSeg in AppPri
must lie in [1, ..,
BPSegNum], all the
RateSeg in AppPri
0-999
N/A
N/A
N/A
N/A
must lie in [1, ..,
DlRateAdjLevNum+1]
for downlink or [1, ..,
UlRateAdjLevNum+1]
BPSegNum
for uplink , and every
DlRateAdjLevNum
Mapping
downlink
0..15
N/A
AP_Default
combination
of
UlRateAdjLevNum
AppPri,
all
the BPSeg
BPSeg element
in
Direction
in
BPSegNum],
[1,[1,
.., ..,
BPSegNum]
Direction
equal
to 1,
and RateSeg
element
all
the
RateSeg
in
in [1, ..,
[1,
..,
Mapping
downlink
DlRateAdjLevNum+1]
0..255
N/A
AP_Default
N/A
N/A
DlRateAdjLevNum+1]
AppPri,
all the
must have
oneBPSeg
record
, all
in
[1,the
.., BearerType
BPSegNum],
AppPri.
in
[0,
1, 2]requirement
must to
have
Direction
equal
1,
all
these
Direction of AppPri
one
record
in
AppPri.
all
the
RateSeg
in
should
be
guaranteed
RateSeg of AppPri
Mapping
uplink
[1,
..,
by
operator.
BPSeg
Mapping
downlink
0: DCH1: HSPA2:N/A
MBMS
AP_Default
AppPri,
all
the BPSeg
DlRateAdjLevNum+1]
BPSegNum
AppPri,
all
the BPSeg
in
[1,
..,
BPSegNum],
, all
DlRateAdjLevNum
in
[1,the
.., BearerType
BPSegNum],
Direction
equal
1,
in [0, 1, 2]equal
must to
have
UlRateAdjLevNum
to
1,
BearerType of AppPri Direction
all
the
RateSeg
in
one
record
in AppPri.
all
the
RateSeg
in
Direction of AppPri
[1,
..,
Mapping
uplink
[1,
..,
RateSeg of AppPri
UlRateAdjLevNum+1]
1..MAX_BP_SEGMENT,
N/A
MAX_BP_SEGMENT=16
AP_Default
AppPri,
all
the BPSeg
DlRateAdjLevNum+1]
BPSegNum
,inall
the
BearerType
[1,
..,
BPSegNum],
,inall
DlRateAdjLevNum
[0,the
1] BearerType
must have
Direction
to
1,
in
[0,record
1, 2]equal
must
have
UlRateAdjLevNum
one
in AppPri.
BearerType of AppPri all the RateSeg
in
one
record
in AppPri.
all
these
requirement
RateSeg of AppPri
[1,
..,
Mapping
uplink
should
be guaranteed
BPSeg
UlRateAdjLevNum+1]
0: Uplink1: Downlink
N/A
AP_Default
AppPri,
all the BPSeg
by
operator.
BPSegNum
,inall
[1,the
.., BearerType
BPSegNum],
DlRateAdjLevNum
in [0, 1] must
have
Direction
equal
to 1,
UlRateAdjLevNum
one
record
in AppPri.
all the
RateSeg
in
all
requirement
[1, these
..,
should
be guaranteed
UlRateAdjLevNum+1]
by
operator.
, all the BearerType
in [0, 1] must have
one record in AppPri.
by operator.
(1..16) step 1dB dB
CelSel_Default
QqulmnOffstPre
0: False1: True
N/A
CelSel_Default
QrxlevminOffset
in [1, .., BPSegNum],

Direction equal to 1,
all the RateSeg in
[1, ..,
DlRateAdjLevNum+1]
in [0, 1, 2] must have
Mapping uplink
AppPri, all the BPSeg
in [1, .., BPSegNum],
Direction equal to 1,
all the RateSeg in
[1, ..,
UlRateAdjLevNum+1]
N/A
in [0, 1] must have
N/A
by operator.
(2..16)step 2dB
dB
CelSel_Default
QrxlvmnOffstPre
N/A
0: False
1: True
N/A
CelSel_Default
QrxlevminOffset
N/A
0..65535
N/A
16
N/A
N/A
0..65535
N/A
16
N/A
N/A
(0.. 62)dB step

0.1
dB
6dB
N/A
N/A
(0...100000)
kbps
kbps
800
MbmsSuptInd
Valid only when the

cell supports MBMS.
0..65535
N/A
80
MbmsSuptInd
BearerType of AppPri
Direction of AppPri
1..MAX_NUM_RATE_ADJUST+1,
N/A
AP_Default
MAX_NUM_RATE_ADJUST
RateSeg of=6
AppPri
BPSeg
BPSegNum
Enumerate(0, 1,
2, 3); 0: CCCH;
N/A
1: SRB1; 2:
Otherother SRB;
3: DTCH
DL_E_FACH_Default
EFACHSPPTIND
Valid
if the only
valuewhen
of the
cell
supports
MBMS.
EFACHSPPTINDis
"False", this
for the
correspongding Cell
This parameter is an
array, the element of
which is
corresponding to the
element of array
MACehsQID
Integer (20, 40,

60, 80, 100,
120, 140, 160,
180, 200, 250,
300, 400, 500,
750, 1000,
ms
1250, 1500,
1750, 2000,
2500,
Integer3000,
((10, 20,
3500,
30, 40,4000,
50, 60,
4500,
70,
80,5000,
90, 100,
7500,
...) 160, ms
120, 140,
200, 300, 400);
unit: ms
Integer (1, 2, 3,
4)
Integral multiple
of DLEFACHT1 DL_E_FACH_Default
EFACHSPPTIND
parameter
0: False
1: True
N/A
DL_E_FACH_Default
EFACHSPPTIND
0-65534
N/A
N/A
N/A
if the value of
EFACHSPPTINDis
"False", this
for the
correspongding
if the value of Cell
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
element of arrayCell
correspongding
ifMACehsQID
the value of
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
correspongding
ifMACehsQID
the value of
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
correspongding
MACehsQID
which is
element of array
N/A
MACehsQID
INTEGER (35..15)dB step

by 0.1
dB
N/A
N/A
INTEGER (35..15)dB step

by 0.1
dB
N/A
ifN/A
the value of
EFACHSPPTINDis
"False", this
for the
correspongding
if the value of Cell
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
correspongding
ifMACehsQID
the value of
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
correspongding
ifMACehsQID
the value of
This
parameter is an
EFACHSPPTINDis
array,
thethis
element of
"False",
which
is
corresponding
to the
for the
correspongding
MACehsQID
which is
element of array
MACehsQID
DL_E_FACH_Default
EFACHSPPTIND
DL_E_FACH_Default
EFACHSPPTIND
INTEGER (0..7) N/A
DL_E_FACH_Default
EFACHSPPTIND
Integer (4, 6, 8,
12, 16, 24, 32)
Byte
DL_E_FACH_Default
EFACHSPPTIND
INTEGER
(1..1504)Byte
Byte
DL_E_FACH_Default
EFACHSPPTIND
INTEGER
(0..15), step: 1
N/A
DL_E_FACH_Default
EFACHSPPTIND
0..999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
1..MAX_ARP_S
EGMENT,
N/A
MAX_ARP_SEG
MENT=15
ARPThresh[]
is array,
N/A
the valid element
number is
ARPSegNum; If
ARPSegNum larger
ARPSegNum of
than 2, all the valid
[5, 10]
QosSeg
ARPThresh[] element
should be set as:
ARPThresh[0]<ARPT
hresh[1]<ARPThresh[
2]<...<ARPThresh[AR
BPThresh[]
is array,
5
N/A
N/A
PSegNum-2].
the valid element
number is
BPSegNum; If
BPSegNum larger
[3, 6, 9, 11]
BPSegNum of QosSeg
BPThresh[] element
should be set as:
BPThresh[0]<BPThre
sh[1]<BPThresh[2]<..
.<BPThresh[BPSegN
[8, 8, 8, 8, 8, 16, 16,
N/A
16, 16, 16, 16, 64, 64, um-2].
N/A
64, 64, 64] kbps
3
N/A
1..MAX_THP_S
EGMENT,
N/A
MAX_THP_SEG
MENT=15
N/A
1..15
N/A
[5, 10]
THPSegNum of
QosSeg
N/A
N/A
0: Off
1..15
N/A
1..MAX_BP_SE
GMENT,
N/A
MAX_BP_SEG
MENT=16
0..15
N/A
(0..384)kbps
step 1kbps
kbps
0: Not
Supported
1: Supported
0: Off
1: On
N/A
THPThresh[] is array,
N/A
the valid element
number is
THPSegNum; If
THPSegNum larger
THPThresh[] element
should be set as:
THPThresh[0]<THPT
hresh[1]<THPThresh[
2]<...<
THPThresh[THPSeg
N/A
Num-2].
N/A
INTEGER
(0..8000)
kbps
64
0..15
N/A
SP_Default
N/A
SP_Default
0: DCH
1: HSPA
2: MBMS
Mapping SchPrio all

the BasicPrio must lie
N/A
N/A
in [1, .., 15], all the
BearerType must lie
in [0, .., 2], and every
combination of
ARPSegNum of
BasicPrio element in
QosSeg, TrafficClass of [1, .., 15] and
BasPri
BearerType element
in [0, .., 2] must have
one record in
R8SchPri.
all
N/A
N/Athese requirement
by operator.
0..255
N/A
SP_Default
SchPriIndex of
UtranCell
SchPriIndex of
UtranCell must have
the corresponding
SchPriIndex with the
same value in SchPri.
0..15
N/A
SP_Default
N/A
N/A
BPriAcIndex of
UtranCell must have
the corresponding
BPriAcIndex with the
same value in
BPriAc.
CgtCtlPriIndex of
UtranCell must have
the corresponding
CgtCtlPriIndex with
the same value in
AppPri.
0-255
Array[0..3]
N/A
BPriAcIndex of BPriAc
0-255
Array[0..3]
N/A
AppPriIndex of AppPri
N/A
1: Supported
N/A
N/A
LdCtlPriIndex of
UtranCell must have
the corresponding
AppPriIndex with the
same value in AppPri.
0: Not
Supported
1: Supported
0-255
Array[0..3]
N/A
AppPriIndex of AppPri
0-255
Array[0..3]
N/A
SchPriIndex of SchPri. N/A
0: Not
Supported
1: Supported
N/A
N/A
0: Not
Supported
1: Supported
N/A
N/A
0..65534
N/A
N/A
N/A
0..65534, 0xffff
N/A
CNbCom
NbCMCfgNo of NbCom
the record must exist

in NbCom
0..65534, 0xffff
N/A
CNbCom
NbCMCfgNo of NbCom

in NbCom
0..65535
N/A
CNbCom
NbCMCfgNo of NbCom

in NbCom
0..65535
N/A
CNbCom
NbCMCfgNo of NbCom

in NbCom
N/A
CNbCom
NbCMCfgNo of NbCom

in NbCom
N/A
BPriAc
N/A
all the BasicPrio in

BPriAc must have
one value
0..65534, 0xffff
where 0xffff
means invalid
0..16
Where 0-15 is
the real value
range for the
Basic Priority
and 16 means
handover.
0..255
N/A
BPriAc
(0-100)%
BPriAc
(1.. 100)% step

1%
BPriAc
BPriAcIndex of
UtranCell must have
RefSFLayer
and
BPriAcIndex of
the corresponding
CodeTreeResRto
are
UtranCell
BPriAcIndex with the
used
the admission
sameinvalue
in
control
BPriAc.algorithm
based on code tree
reserved ratio, in
RefSFLayer
order to reserve
DlCacSwitch
DlSeriousOverLd
>
some codes for users
DlOverLd
>Values of
of certain service
all the records of
BPriAcIndex of BPriAc, type.
DchDlAcThresh
of
If DlCacSwitch="0:
DlSeriousOverLd,
BPriAc
which
has the
closed",
this
DlOverLd , BPriAcIndex
same
BPriAcIndex
parameter
is invalidas
of UtranCell
that in UtranCell.
DlCacSwitch
If DlCacSwitch="0:
closed", this
(0.. 62)dB step

0.1
dB
BPriAc
BPriAcIndex of BPriAc,
UlSeriousOverLd,
UlOverLd, BPriAcIndex
of UtranCell
UlCacSwitch
(0..62)dB step
0.1
dB
BPriAc
UlCacSwitch
NodeBSafeThr of
LdCtrl, BPriAcIndex of
UtranCell
DlCacSwitch
ThreshRefCount,
DlSeriousOverLd,
DlOverLd, DlAlrmLd,
BPriAcIndex of
UtranCell
DlCacSwitch
UlSeriousOverLd>Ul
OverLd>Values of all
the records of
DchUlAcThresh of
BPriAc which has the
same BPriAcIndex as
that in UtranCell.
If UlCacSwitch="0:
closed", this
If
UlCacSwitch="0:
parameter
is invalid
closed", this
NodeBSafeThr>
Values of all the
records of
HsdpaAcThresh of
ThreshRefCount<=
BPriAc
which has the
MbmsAcThresh;
same
BPriAcIndex
as
DlSeriousOverLd>Dl
that
in
UtranCell
OverLd> Values of all
If
DlCacSwitch="0:
the
records of
closed",
this
MbmsAcThresh
of
parameter which
is invalid
R7BPriAc
has
the same
BPriAcIndex as that
in R6SrvCell
>DlAlrmLd.
If
If DlCacSwitch="0:
DlCacSwitch="0:
closed",
closed", this
this
parameter
parameter is
is invalid
invalid
(1..100)% step
1%
BPriAc
(1.. 100)% step

1%
BPriAc
(0..100)%
BPriAc
DlCacSwitch
(1.. 100)% step

1%
N/A
BPriAc
MbmsAcThresh of
BPriAc
ThreshRefCount<=
MbmsAcThresh
0-999
N/A
460
N/A
N/A
0..999
N/A
N/A
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
On
DlThrputSwitch
If DlCacSwitch is set
to "0", then
DlThrputSwitch must
be set to "0"
-106
N/A
N/A
0: Off
1: On
N/A
(-112...-50)dBm
dBm
step 0.1dBm
(46..158)dB step
dB
1dB
(4(0), 8(1),
16(2), 32(3),
64(4), 128(5),
256(6), 512(7))
N/A
0.. 255
N/A
(0-255) step by
0:
1 Received
Total Wide Band
Power
1: Transmitted
Carrier Power
6:
0-2UTRAN GPS
Timing of Cell
Frames for UE
Positioning
8: Transmitted
Carrier Power of
All Codes not
Used for HSPDSCH or HSSCCH
0:
Period Report
(0,
1, 2, 3, 4,for
5,
Transmission
Parameters
6,
7,
8,
9,
11,
9:
HS-DSCH
RTWP
13,
15, 17,Report
19)
Required
Power
1: Period
20:
Received
Parameters for
Scheduled ETCP
DCH
Power
2:
Period
NodeB
Share
1: Cell
Common
Measurement
Report
Parameters for
TUTRAN-GPS
3:
On
0..65535
Modification
NodeB Common
Measurement
Report
Parameter for
TUTRAN-GPS
4: Period Report
Parameters
for
RptPrdUnit=ms:
HS-DSCH
(10..60000)ms
Required Power
step10ms
5:
Period Report
RptPrdUnit=min:
Parameters
(1..60)min for
NotusedHSstep1min
DSCH_TCP
6: Period NodeB
Common
Measurement
Report
Parameters for
Received
Scheduled EDCH Power
N/A
N/A
N/A
N/A
N/A
N/A
N/A
ms or min
ComMeasType must
be 0(Received total
wide band power),
RptType must be
2(Periodic);
if NbCMCfgNote
equals to 1( Period
Report Parameters
If
DlCacSwitch="0:
RefSFLayer
and
for TCP),
130
DlCacSwitch
closed",
this
CodeTreeResRto
are
ComMeasType
must
parameter
invalid
used
in theisadmission
be
1(Transmitted
control
Carrier algorithm
Power),
based
onmust
codebe
tree
RptType
reserved
ratio,
in
2(Periodic);
CodeTreeResRto
128
to reserve
iforder
NbCMCfgNote
DlCacSwitch
some codes
for users
equals
to 2(Period
of certain
service
NodeB
Common
type.
Measurement Report
If
DlCacSwitch="0:
Parameters
For
closed",
this
TUTRAN-GPS),
200
N/A
N/A
ComMeasType
must
be 6(UTRAN GPS
Timing of Cell
Frames for UE
Positioning),
RptType
64
N/A
N/A
must be 2(Periodic);
if NbCMCfgNote
equals to 3(On
Modification NodeB
Common
0
N/A
N/A
Measurement Report
Parameters For
TUTRAN-GPS),
ComMeasType must
be 6(UTRAN GPS
NbCMCfgNote,
NbCom_Default
Timing of Cell
RptType
Frames for UE
Positioning),
RptTypemust be
9(On Modification);
ifN/A
NbCMCfgNote
NbCom_Default N/A
equals
to 4( Period
1. the following
Report
Parameters
NbCPrdRtwp of
parameter
value must
for
HS-DSCH
CNbCom, NbCPrdRtwp exist both in
Required
of CNbCom,
CNbCom Power),
and
ComMeasType
must
NbCPrdTcp
of
NbCom:
NbCom_Default N/A
N/A
be
9(HS-DSCH
CNbCom,
NbCPrdRtwp,
Required
Power),
NbCPrdTUGps of
NbCPrdTcp,
RptTypemust
be
CNbCom,
NbCPrdTUGps,
2(Periodic);
NbCModTUGps of
NbCModTUGps,
NbCMCfgNote
CNbCom, NbCPrdHrp ifNbCPrdHrp,
NbCom_Default
equals
to 5( Period
of CNbCom,
NbCPrdHrp,
Report
Parameters in
NbCPrdHrp of
NbCPrdNHTcp,
State
I
for
every
value
of
CNbCom,
NbCPrdRSEPS
NotusedHSNbCMCfgNote
in
NbCPrdNHTcp of
2. every value of
DSCH_TCP),
NbCom
must
have
CNbCom,
NbCMCfgNote in
ComMeasType
must
NbCom_Default NbCPrdRSEPS
NbCMCfgNo
one
corresponding
of
NbCom
must have
be
8(Transmitted
record
of
CNbCom,
one corresponding
carrier
of all
NbCMCfgNo
in
NbCMCfgNote of
record power
of
codes
not
used
NbCom
NbCom
NbCMCfgNo in for
HS-PDSCH
or HSthis
parameter
is
NbCom
SCCH
transmission),
valid
only
when
NbCom_Default RptType
must
be is
RptType in
NbCom
2(Periodic);
Periodic
if NbCMCfgNote
equals to 6( Period
NodeB Common
Measurement Report
Parameters for
Received Scheduled
E-DCH Power
Share),
ComMeasType must
be 20(Received
1: ms
2: min
N/A
2: Periodic
9: On
Modification
N/A
0: Off
1: On
N/A
(-24..0) step
0.5dB
dB
0..32, 0 means
queuing function N/A
is not supported
(1..60)s
(0..60)s
0: Off
1: On
N/A
(0..384)kbps step kbps

1kbps
(1..65535)TBs
TBs
BLERtarget ValueN/A
Range
be 6(UTRAN GPS
Timing of Cell
Frames for UE
Positioning), RptType
must be 2(Periodic);
if NbCMCfgNote
equals to 3(On
Modification
NodeB
this parameter
is
Common
valid only when
NbCom_Default RptType
Measurement
Report
RptType in NbCom
is
Parameters
For
Periodic
TUTRAN-GPS),
ComMeasType must
be 6(UTRAN GPS
NbCom_Default NbCMCfgNote
Timing of Cell
Frames for UE
Positioning),
RptTypemust be
9(On Modification);
ifN/A
NbCMCfgNote
0: Off
N/A
equals to 4( Period
Report Parameters
for HS-DSCH
Required Power),
If
DlCacSwitch="0:
ComMeasType
must
-7
DlCacSwitch
closed",
this
be 9(HS-DSCH
parameter
is invalid
Required Power),
RptTypemust be
2(Periodic);
if NbCMCfgNote
16
N/A
N/A
equals
to 5( Period
Report Parameters in
State I for
NotusedHS- Note:
Configuration
DSCH_TCP),
The parameter value
ComMeasType
must
10s
N/A
should not be bigger
be
8(Transmitted
than RAB response
carrier
of CN.
all
waitingpower
timer of
codes not used for
HS-PDSCH or HSSCCH transmission),
4s
N/A
N/A
RptType must be
2(Periodic);
if NbCMCfgNote
equals to 6( Period
NodeB Common
LdCtrl
N/A
N/A
Measurement
Report
Parameters for
Received Scheduled
E-DCH Power
Share),
[8, 8, 8, 8, 8, 16, 16,
N/A
16, 16, 16, 16, 64, 64, ComMeasType
N/A
64, 64, 64] kbpsmust
be 20(Received
Scheduled E-DCH
Power Share),
RptType must be
2(Periodic)
TrfPcLoadScene N/A
N/A
TrfPcLoadScene N/A
N/A
N/A
TrfPcLoadScene SrvType of TrfPc
Only valid for uplink

services.
0..6
N/A
2ms E-TTI
traffic: [6, 6, 6]
10ms E-TTI
traffic: [6, 6, 6]

and non-MBMS
services.
1..50
TBs
TrfPcLoadScene N/A
N/A
Signaling: 3
Conversational
and Streaming: 2
SrvType of SubSrv
Background: 3
Interactive: 3
1.Only valid for uplink

services.
2.For
uplink
Only valid
forservices:
uplink
NhrThrDownTti10[0]<
services.
=
NhrThrDownTti10[1]<
=
NhrThrDownTti10[2]
services.
3.For
2.For uplink
uplink services:
services:
NhrThrDownTti10[0]
NhrThrUpTti10[0]<=
<= NhrThrUpTti10[0]
NhrThrUpTti10[1]<=
For uplink services:
NhrThrUpTti10[2].
NhrThrDownTti10[1]
3.For uplink services:
<=
NhrThrUpTti10[1]
NhrThrDownTti10[0]
For
uplink services:
<= NhrThrUpTti10[0]
NhrThrDownTti10[2]
<=
NhrThrUpTti10[2].
NhrThrDownTti10[1]
<= NhrThrUpTti10[1]
Only
valid for
uplink
For uplink
services:
services.
NhrThrDownTti10[2]
<= NhrThrUpTti10[2].
0..255
0..15
N/A
SrvType of SubSrv,
MbmsInd of SubSrv
(0..15) step 0.01 N/A
SrvType of TrfPc,
TrfPcLoadScene NhrThrUpTti10[],
NhrThrDownTti10[]
(0..15) step 0.01 N/A
SrvType of TrfPc,
NhrThrDownTti10[]
0..255
N/A
1...20
N/A
(0..100)% step
0.1%
N/A
TrfPcLoadScene
SrvType of SubSrv,
MbmsInd of SubSrv
Only vaild for nonMBMS services.
(0..100)% step
0.1%
N/A
TrfPcLoadScene
SrvType of SubSrv,
MbmsInd of SubSrv
Only vaild for nonMBMS services.
(0.5, 1, 1.5,
2)dB
dB
1dB
SrvType
Only valid for

downlink services.

services.
(1, 2)dB
dB
0..65535
N/A
1: Algorithm 1
2: Algorithm 2
N/A
(0.1..0.5)dB step 0.1dB

dB
(0.1..0.5)dB step 0.1dB

dB

services.
When UlIlPcAlg takes
SrvType of TrfPc,
1dB
the value of
UlIlPcAlg of TrfPc
'Algorithm 2',
TpcStepSize can only
be set to 1dB.
There must be a
same parameter
1
TrfPcIndex of utranCell
TrfPcIndex in
utranCell.
services.
When UlIlPcAlg takes
SrvType of TrfPc,
Algorithm 1
the value of
TpcStepSize of TrfPc
'Algorithm 2',
TpcStepSize can only
1.
beOnly
set tovalid
1dB.for
uplink services.
SrvType of TrfPc,
2. For uplink
UlSirTargDnStep
MaxSirTargDnStep
services:
UlSirTargDnStep<=
MaxSirTargDnStep
UL 384K(PS):
0.5dB
Others: 0.3dB
SrvType of TrfPc

services.
(0.1..1)dB step 0.1dB

dB
0.6 dB
SrvType of TrfPc,
UlSirTargDnStep
1. Only valid for

uplink services.
2. For uplink
services:
UlSirTargDnStep<=
MaxSirTargDnStep
0: Not Support1: Support

N/A
N/A
N/A
1: Signalling FixedN/A
Mode, Service Flexible
3
Mode2: Signalling
N/A
and Conversational
N/AService Fixed Mode, other Service Flexib
2..1505byte
byte
124
CMinUlPduSize of
rncFunction
CMaxUlPduSize >
CMinUlPduSize
2..1505byte
byte
CMaxUlPduSize of
rncFunction
CMaxUlPduSize >
CMinUlPduSize
2..1505byte
byte
244
NonCMinUlPduSize of
rncFunction
NonCMaxUlPduSize
> NonCMinUlPduSize
2..1505byte
byte
21
NonCMaxUlPduSize of NonCMaxUlPduSize
rncFunction
> NonCMinUlPduSize
0: Not Support
1: Support
N/A
N/A
N/A
(0..100)% step
0.1%
N/A
TrfPcLoadScene N/A
N/A
(0..1000)ms
step 10ms
ms
500ms
N/A
N/A
0..10 TBs
TB
SrvType of TrfPc

services.
0..100 TBs
TB
10
SrvType of TrfPc

services.
0..50
N/A
SrvType of TrfPc

services.
0..50
N/A
SrvType of TrfPc

services.
0..155
N/A
95
MinBerTarget
MaxBerTarget >=
MinBerTarget
0..155
N/A
MaxBerTarget
MaxBerTarget >=
MinBerTarget
0: Off
1: On
N/A
0: Off
SrvType of TrfPc

services.
0: Off
1: On
N/A
On
MbmsSuptInd of
UtranCell
N/A
0..65534
N/A
N/A
Cid of UtranCell
N/A
0..65534
N/A
N/A
Cid of UtranCell
N/A
0..65535
N/A
UeTrvMCfgNo of UeTrv
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
; UeTrvMCfgNote of
N/A
UeTrv
0..65535
N/A
10
; UeTrvMCfgNote of
N/A
UeTrv
0: Off
1: On
N/A
Off
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
(1..384)kbps
step 1 kbps
kbps
32kbps
N/A
N/A
0: Off
1: On
N/A
On
DrbcSwch ;
N/A
UlPwrDasf ; DlPwrDasf
1..255
N/A
DrbcScene
DrbcSwch
N/A
1..255
N/A
DrbcScene
DrbcSwch
N/A
0: Off
1: On
N/A
On
N/A
N/A
30
N/A
N/A
0: Switch Off in
0..65535
UL & Switch Off 100ms
in DL
1: Switch Off in
UL & Switch On
in DL
2: Switch On in N/A
UL & Switch Off
in DL
3: Switch On in
UL & Switch On
in DL
3: Switch On in ULN/A
& Switch On in DL
N/A
1..255
N/A
DrbcScene
DrbcSwch,
AmrRncAdjust
N/A
1..255
N/A
DrbcScene
DrbcSwch,
AmrRncAdjust
N/A
(0-65535)s
10s
N/A
N/A
1..65535
N/A
DrbcScene
DToPchThd
N/A
1..65535
N/A
DrbcScene
1..65535
N/A
DrbcScene
ToFtimesThr
N/A
1..65535
N/A
DrbcScene
DrbcSwch ;
N/A
0: Off
1: On
N/A
0: Off
DrbcSwch;
N/A
1..65535
N/A
DrbcScene
FToPchThd
;
N/A
1..65535
N/A
DrbcScene
FToIdleThd
N/A
0: Off
1: On
N/A
Off
N/A
N/A
DToIdleThd
N/A
0..384 kbps
kbps
DrbcScene
DlRateAdjLev
N/A
0..384 kbps
kbps
DrbcScene
UlRateAdjLev
N/A
(20..200)ms
step: 10
ms
60ms
N/A
N/A
1..65535s
DrbcScene
DrbcSwch ;
N/A
0: Not Support
1: Only Support N/A
URA_PCH
Not Support
DrbcSwch;
N/A
(1..384)kbps
kbps
64kbps
N/A
N/A
(1..384)kbps
kbps
64kbps
N/A
N/A
(1..384)kbps
kbps
128kbps
N/A
N/A
(1..384)kbps
kbps
128kbps
N/A
N/A
(0..65535)kbps
step 1 kbps
kbps
8kbps
N/A
N/A
(0..65535)kbps
step 1 kbps
kbps
8kbps
N/A
N/A
0: Off
1: On
0: Off
1: On
N/A
0: Off
N/A
N/A
N/A
Off
N/A
N/A
N/A
1..65535
N/A
DrbcScene
DrbcSwch;
DToPchThd;
DToIdleThd;
DxHsBo0E4bThd
0: Off
1: On
N/A
1: On
N/A
N/A
0..65535 Unit:
(100ms)
100ms
30
N/A
N/A
0: Off
1: On
N/A
1: On
InitRrcOnDch of
rncFunction
N/A
0..65535 kbps
kbps
3650kbps
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0..384 kbps
kbps
384 kbps
MaxBitRate of SubSrv,
N/A
Direction of SubSrv
0..65535 kbps
kbps
5760kbps
N/A
Direction of SubSrv
0..384 kbps
kbps
384 kbps
N/A
Direction of SubSrv
0..384 kbps
kbps
384 kbps
N/A
Direction of SubSrv
0..65535 kbps
kbps
5760kbps
N/A
Direction of SubSrv
0..384 kbps
kbps
384 kbps
N/A
Direction of SubSrv
0: Off
1: On
N/A
1: On
N/A
N/A
INTEGER
(1..1505, ...) unit octets
octets
65
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: False
1: True
N/A
N/A
N/A
0: False
1: True
N/A
2: True
N/A
N/A
1..64
N/A
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
0: False
1: True
N/A
1: True
N/A
N/A
1: True
(1..384) kbps
step
1kbpsto
0: Forced
CELL_DCH and
Using
DCH/DCHLow
1..MAX_NUM_R
Rate
Signaling
ATE_ADJUST,
1:
Forced to
MAX_NUM_RA
CELL_DCH
and
TE_ADJUST=6
Using DCH/DCH
with 13.6k
Signaling
(1..384) kbps
2:
Forced
step
1kbpsto
FACH
3: Not Forced,
Using DCH/DCH
1..MAX_NUM_R
with
DCH/DCH
ATE_ADJUST,
Low Rate
MAX_NUM_RA
Signaling on
TE_ADJUST=6
Cell_DCH State
4: Not Forced,
Using DCH/DCH
with 13.6k
Signaling on
Cell_DCH State
5: Forced to
CELL_DCH and
Using
0:
Off DCH/DCH
with
1: On27.2k
Signaling
6: Not Forced,
Using DCH/DCH
with 27.2k
0,
5, 10, 20,
Signaling
on 30,
60,
90,
120
s
Cell_DCH State
7: Forced to
HSPA
8:
0: Not
Off Forced,
Using
1: On HSPA
signaling on
CELL_DCH
state
kbps
[8, 64, 128, 384] kbps
N/A
Direction of SubSrv
N/A
N/A
kbps
[16, 64, 384] kbps
N/A
Direction of SubSrv
N/A
N/A
N/A
Forced to CELL_DCH
N/A and Using DCH/DCHN/A
with 13.6k Signaling
N/A
1: On
MbmsInd of SubSrv
Only valid in the

services whose
MbmsInd is "1"
10s
N/A
N/A
N/A
0: Off
N/A
N/A
(20, 40, ..,

260)ms step
20ms
ms
100ms
MeasQuantity of UeTrv N/A
(4a, 4b)
N/A
[4a, 4b]
RptCrt of UeTrv
N/A
RptCrt of UeTrv
N/A
1..MAX_UE_TR
V_MEAS_EVEN
T
N/A
where
MAX_UE_TRV_
MEAS_EVENT=
2
N/A
N/A
1: DCH
2: RACH
51: FACH
N/A
52: HS-DSCH
53:RLC
E-DCH
1:
buffer
payload,
2: Average RLC
buffer payload
N/A
3: Variance of
RLC buffer
0:
payload
Acknowledged
Mode RLC
1:
N/A
Unacknowledge
d Mode RLC
(250, 500, 1000,
2000, 4000,
ms
8000, 16000)
ms
1, 2, 4, 8, 16,
N/A
32, 64, Infinity
(250, 500, 1000,
2000, 3000,
4000, 6000,
8000, 12000,
ms
16000, 20000,
24000, 28000,
32000,
1: Event
64000)ms
Reporting
Criteria
N/A
2: Periodical
Reporting
Criteria
0: False
1: True
N/A
0: False
1: True
N/A
0: False
N/A
1:
(8,True
16, 32, 64,
128, 256, 512,
1024, 2K, 3K,
4K, 6K, 8K, 12K,
16K, 24K, 32K,
bytes
48K , 64K, 96K,
128K, 192K,
256K, 384K,
512K, 768K)
bytes
Volume
value
event
buffer for
payload
Measurement
Measurement
[4a
4b]
is
as the
5 (UP Traffic
Configuration
Configuration
following
Volume for
Number
Number
forto the
according
Measurement
DCH):
Event
DCH):
[2000,
value
of
the
Configuration
Reporting
4000]ms
different
0
(UE Traffic
Number
for
Criteria
4
(UE
Traffic
measurement
Volume
Period
FACH):
Average
2
(UP Traffic
Volume
Event
purpose:
Measurement
RLC buffer
Volume
Measurement
0:
DCH
Configuration
payload
Measurement
Configuration
1:
DCHTraffic
Number
for
6 (UP
Configuration
Number
for
2:
DCH
DCH):
False
Volume
Number
for
0
(UE Traffic
RACH):
[4000,
3:
RACH
1
(UE
Traffic
Measurement
DCH):
Event
Volume
Period
1000]
ms
4:
RACH
Volume
Event
Configuration
Reporting
Measurement
5
(UP
Traffic
5:
FACH
Measurement
Number
for
Criteria
Configuration
Volume
6:
HS-DSCH
Configuration
Streaming
3
(UE
Traffic
Number
forClass
Measurement
7:
HS-DSCH
Number
for
on
HS-DSCH):
Volume
Period
DCH):
True
0
(UE
Traffic
Configuration
9:
E-DCH
DCH):
False
Average
RLC
Measurement
1
(UE Traffic
Volume
Period
Number
for
10:
E-DCH
2
(UP
Traffic
buffer
payload
Configuration
Volume
Event
Measurement
FACH):
[4000
11:
HS-DSCH
Volume
7
(UP
Traffic
Number
for
Measurement
Configuration
1000]
ms
12:
E-DCH
Acknowledged
Measurement
Volume
RACH):
Configuration
Number
for
6
(UP RLC
Traffic
Mode
Configuration
Measurement
Periodical
Number
for
DCH):
False
Volume
Number
for
Configuration
Reporting
DCH):
True
1
(UE Traffic
Measurement
DCH):
True
Number
for
Criteria
2
(UP Traffic
Volume
Event
Configuration
3
(UE
Traffic
Interactive
and
4
(UE
Traffic
Volume
Measurement
Number
for
Volume
Period
Background
Volume
Event
Measurement
0
(UE Traffic
Configuration
Streaming
Class
Measurement
Class
onPeriod
HSMeasurement
Configuration
Volume
Number
for
on
HS-DSCH):
Configuration
DSCH):
Average
Configuration
Number
for
Measurement
DCH):
False
[2000,
4000]
The
default
Number
for
RLC
buffer
Number
for ms
DCH):
True
Configuration
2
(UP
Traffic
7
(UP for
Traffic
value
event
RACH):
False
payload
RACH):
Event
3
(UE Traffic
Number
for
Volume
Volume
[4a
4b]
is
as the
4
(UE
Traffic
9
(UP
Traffic
Reporting
VolumeInfinity
Period
DCH):
Measurement
Measurement
0
(UE Traffic
following
Volume
Event
Volume
Criteria
Measurement
3
(UE Traffic
Configuration
Configuration
Volume
Period
according
to the
Measurement
Measurement
5
(UP Traffic
Configuration
Volume
Period
Number
for
Number
for
Measurement
value
of
the
Configuration
Configuration
Volume
Number
for
Measurement
DCH):
True
Interactive
Configuration
different
Number
for
Number
forand
EMeasurement
RACH):
True
Configuration
3
(UE
Traffic
Background
Number
for
measurement
RACH):
False
DCH):
Average
Configuration
4
(UE
Traffic
Number
for
Volume
Period
Class
on
HSDCH):
4000ms
purpose:
5
(UPbuffer
Traffic
RLC
Number
for
Volume
Event
RACH):
Infinity
Measurement
DSCH):
[2000,
3
4
(UE
Traffic
Volume
payload
FACH):
Event
Measurement
Configuration
4000]
ms
Period
Volume
Event
Measurement
10
(E-DCH
Reporting
Configuration
Number
for UP
9
(UP
Traffic
Measurement
Configuration
Throughput
Criteria
Number
for
RACH):
False
Volume
Configuration
Number
for
Measurement
6
(UP
Traffic
RACH):
True
4
(UE Traffic
Measurement
Number
for
FACH):
True
Configuration
Volume
5
(UP Traffic
Volume
Event
Configuration
8000ms
RACH):
[256,
6
(UP
Traffic
Number
for E-8]
Measurement
Volume
Measurement
Number
for Ebytes
Volume
TTI
Switching):
Configuration
Measurement
Configuration
DCH):
[2000,
5
(UP
Traffic
Measurement
Average
RLC
Number
for
Configuration
Number
for
4000]
ms
Volume
Configuration
buffer
payload
Streaming
Class
Number
for
RACH):
False
10
(E-DCH
Measurement
Number
for UP
11(UP
Traffic
on
HS-DSCH):
FACH):
True
5
(UP Traffic
Throughput
Configuration
Streaming
Class
Volume
Event
Reporting
6
(UP Traffic
Volume
Measurement
Number
for
on
HS-DSCH):
Measurement
Criteria
Volume
Measurement
Configuration
FACH):
[256, 8]
True
Configuration
7
(UP Traffic
Measurement
Configuration
Number
for
Ebytes
7
(UP
Traffic
Number
for
Volume
Configuration
Number
for HSTTI
Switching):
6
(UP
Traffic
Volume
DSCH
inFalse
Measurement
Number
for
FACH):
[2000,
4000]ms
Volume
Measurement
CELL_FACH):
Configuration
Streaming
Class
6
(UP Traffic
11(UP
Traffic
Measurement
Configuration
Average
RLC
Number
for
on
HS-DSCH):
Volume
Volume
Configuration
Number
forand
buffer
payload
Interactive
True
Measurement
Measurement
Number
forand
Interactive
12(UP
Traffic
Background
7
(UP
Traffic
Configuration
Configuration
Streaming
Class
Background
Class
onfor
HSVolume
Number
Number
for
HSon
HS-DSCH):
Class
on
HSDSCH):
Event
Measurement
Streaming
Class
DSCH
inTrue
[12K,
256]
bytes
DSCH):
Configuration
Reporting
on
HS-DSCH):
CELL_FACH):
7
(UP
Traffic
9
Number
for ECriteria
True
[2000,
4000]ms
Volume
DCH
in
9
(UP
Traffic
Interactive
and
7
(UP Traffic
12(UP
Traffic
Measurement
CELL_FACH):
Volume
Background
Volume
Volume
Configuration
Average
Measurement
Class
on RLC
HSMeasurement
Measurement
Number
for Ebuffer
payload
Configuration
DSCH):
True
Configuration
Configuration
Interactive
and
DCH):
True
Number
for
E9
(UP Traffic
Number
for UP
Number
for
EBackground
10
(E-DCH
DCH):
Event
Volume
Interactive
and
DCH
in
Class
on
HSThroughput
Reporting
Measurement
Background
CELL_FACH):
DSCH):
[6K, 8]
Measurement
Criteria
Configuration
Class
on
HS[2000,
4000]ms
bytes
Configuration
10
(E-DCH
Number
for UP
EDSCH):
True
9
(UP Traffic
Number
for EThroughput
DCH):
True
9
(UP
Traffic
Volume
TTI
Switching):
Measurement
10
(E-DCH
UP
Volume
Measurement
True
Configuration
Throughput
Measurement
Configuration
11(UP
Traffic
Number
for EMeasurement
Configuration
Number
for EVolume
TTI
Switching):
Configuration
Number
for8]EDCH):
[2k,
Measurement
Event
Reporting
Number
for EDCH):
False
bytes
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(8, 16, 32, 64,

128, 256, 512,
1024, 2K, 3K,
4K, 6K, 8K, 12K,
16K, 24K, 32K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K
, 64K,
96K,
(8, 16,
32, 64,
128K,
192K,
128, 256, 512,
256K,
384K,
1024, 2K,
3K,
512K,
4K, 6K,768K)
8K, 12K,
bytes24K, 32K,
16K,
48K , 64K, 96K,
128K, 192K,
256K,
(0, 10, 384K,
20, 40,
512K,
60, 80,768K)
100,
bytes160, 200,
120,
240, 320, 640,
1280, 2560,
5000) ms
0: False
1: True
bytes
bytes
bytes
bytes
bytes
bytes
bytes
ms
N/A
(250, 500, 1000,

2000, 4000,
N/A
8000, 16000)
ms
0..65535
N/A
[4a 4b] is as the

following
according to the
value
of the
The default
different
The
default
value for event
measurement
value
[4a
4b]foris event
as the
purpose:
[4a
4b] is as the
following
1
(UE Traffic
following
according
to the
Volume
Event
according
to the
value
of
the
The
default
Measurement
value
of
the
different
value
for event
Configuration
different
measurement
[4a
4b]
as the
Numberisfor
measurement
purpose:
following
DCH):
[64, 8]
purpose:
1
(UE Traffic
according
to the
bytes
1
(UE Traffic
Volume
Event
value
of
the
The
default
2
(UP
Traffic
Volume
Event
Measurement
different
value
for
event
Volume
Measurement
Configuration
measurement
[4a
4b]
is
as the
Measurement
Configuration
Number for
purpose:
following
Configuration
Number
for 8]
DCH):
[128,
1
(UE Traffic
according
Number
forto the
DCH):
[320,
bytes
Volume
Event
value
of
the
DCH):
[128,
2560]ms
The
default
2
(UP
Traffic16]
Measurement
different
bytes
The
default
2
(UP
Traffic
value
for
event
Volume
Configuration
measurement
configuration
of
Volume
[4a
4b]
is
as the
Measurement
Number
for
purpose:
the
UE traffic
Measurement
following
Configuration
DCH):
[256, 8]
1
(UE Traffic
volume
Configuration
according
Number
forto the
bytes
Volume
Event
measurement
Number
for
value
of
the
DCH):
[128,
The
default
2
(UP
Traffic8]
Measurement
Configuration
DCH):
[320,
different
bytes
value
for event
Volume
Configuration
Index
and the
2560]ms
measurement
[4a
4b]
isfor
as the
Measurement
Number
corresponding
4
(UE
Traffic
purpose:
following
Configuration
DCH):
[512,
functions
are32]
as
Volume
Event
1
(UE Traffic
according
to the
Number
for
bytes
the
following:
Measurement
Volume
Event
value
of[256,
the
DCH):
The
2
(UP
0:
UEdefault
Traffic 16]
Configuration
Measurement
different
bytes
value
forPeriod
event
Volume
Number
for
Configuration
measurement
[4a
4b]
is
as the
Measurement
RACH):
[80,
Number for
purpose:
following
Configuration
2560]ms
DCH):
[1k, 32]
1
(UE Traffic
according
the
Number
fortoDCH
5
(UP
Traffic
bytes
Volume
Event
value
of
the
DCH):
[1024,
1:
UE
Traffic
Volume
2
(UP Traffic 16]
Measurement
different
bytes
Volume
Event
Measurement
Volume
Configuration
measurement
Measurement
Configuration
Measurement
Number for
purpose:
Configuration
Number
for64]
Configuration
DCH):
[2k,
1
(UE Traffic
Number
for
FACH):
[80,
Number
for DCH
bytes
Volume
Event
2:
UP Traffic
2560]ms
DCH):
[2k,
64]
2
(UP Traffic
Measurement
Volume
6
(UP
Traffic
bytes
Volume
Configuration
Measurement
Volume
Measurement
Number for
Configuration
Measurement
Configuration
DCH):
[8k,
Number
for128]
DCH
Configuration
Number
for
bytes
3:
UE Traffic
Number
for
DCH):
[2k, 256]
2
(UP Traffic
Volume
Period
Streaming
Class
bytes
Volume
Measurement
on HS-DSCH):
Measurement
Configuration
[2560,
2560]ms
Configuration
Number
for
7
(UP
Traffic
The
default
Number
for
RACH
Volume
value
for
event
DCH):
[8k,
128]
4:
UE
Traffic
Measurement
[4a
4b]
is
bytes
Volume
Event
Configuration
[False, False]
Measurement
Number for
Configuration
Interactive and
Number
for
Background
The default
RACH
Class for
on event
HSvalue
5:
UP
DSCH):
[4a
4b]Traffic
is[2560,
Volume
2560]ms
[250,
250]ms
Measurement
9 (UP Traffic
Configuration
Volume
Number
for
Measurement
FACH
Configuration
6:
UP Traffic
Number
for EVolume
DCH): [2560,
Measurement
2560]ms
Configuration
10 (E-DCH UP
Number
for
Throughput
Streaming
Class
Measurement
on
HS-DSCH
Configuration
7:
UP Traffic
Number
for EVolume
TTI Switching):
Measurement
[2560, 2560]ms
Configuration
11(UP Traffic
Number
Volume for
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
UeTrvMCfgNote of
UeTrv
N/A
Measurement
Configuration
Number for
FACH
6: UP Traffic
Volume
Measurement
Configuration
Number for
Streaming Class
on HS-DSCH
7: UP Traffic
Volume
Measurement
0:
Off
Configuration
1: On
Number for
Interactive and
Background
Class on HSDSCH
(0..384)kbps
9: UPTraffic
Volume
Measurement
Configuration
Number
for E(0..384)kbps
DCH
10: E-DCH UP
Throughput
Measurement
Configuration
0..65535
kbps
Number for
ETTI Switching
11: UP Traffic
Volume
Measurement
Configuration
0..384 kbps
Number for HSDSCH in
CELL_FACH
12: UP Traffic
Volume
0..384 kbps
Measurement
Configuration
Number for EDCH in
CELL_FACH
0..65535 kbps
0..384 kbps
0: Not
Supported
1: Supported
(100, 200, 400,

800)
kbps
Volume
Measurement
Configuration
Number for
FACH
6: UP Traffic
Volume
Measurement
Configuration
Number for
Streaming Class
on HS-DSCH
7: UP Traffic
Volume
Measurement
On
Configuration
Number for
Interactive and
Background
Class on HS384
kbps
DSCH
9: UPTraffic
Volume
Measurement
Configuration
384kbps for ENumber
DCH
10: E-DCH UP
Throughput
Measurement
Configuration
5760kbps
Number for ETTI Switching
11: UP Traffic
Volume
Measurement
384 kbps
Configuration
Number for HSDSCH in
CELL_FACH
12: UP Traffic
384 kbps
Volume
Measurement
Configuration
Number for EDCH in
CELL_FACH
5760kbps
kbps
384 kbps
N/A
N/A
ms
200ms
N/A
N/A
N/A
kbps
kbps
kbps
kbps
kbps
UeTrvMCfgNo of UeTrv N/A
N/A
N/A
N/A
N/A
N/A
Direction of SubSrv
N/A
Direction of SubSrv
N/A
Direction of SubSrv
N/A
Direction of SubSrv
N/A
Direction of SubSrv
N/A
Direction of SubSrv
N/A
(4, 8, 16, 32 )
frames
frames
8frames
RxBurstlength of
rncFunction
N/A
(1, 2, 4, 8, 16)
frames
frames
4frames
DrxCycleLength of
rncFunction
N/A
N/A
1: support all
E_FACH
N/A
N/A
0: off
1: on
N/A
0: off
PriRedirectRat of
UtranCell
N/A
0..65535
N/A
UE
3 Transmitted
Power Event
Report
Parameters for
AMR: [6a, 6b]
0:
Acquire &
UEFast
Transmitted
Fast
Release
Power Event
Report
Parameters for
PS: [6a, 6b]
UE Rx-Tx Time
0:
Off
Difference
Period Report
Parameters for
Location: UE Rx-Tx Time
Difference Event
Report
Parameters for
UTRAN: [6f, 6g]
UE Rx-Tx Time
Difference
Event
11
Report
Parameters for
RL Timing
Adjustment: [6f,
6g]
12
UE Transmitted
Power Event
Report
Parameters for
Handover: [6a,
0.5
6b]
N/A
N/A
N/A
N/A
DrbcSwch of Drbc
N/A
RptCrt of UeInt
N/A
0: only UL
E_Fach UE
support
1: support all
E_FACH
0: Fast Acquire
& Fast Release
1: Fast Acquire
&Slow Release
N/A
0: Off
1: On
N/A
[6a, 6b, 6f, 6g]
N/A
0..65535
N/A
0..65535
N/A
(1.. 100)% step

1%
N/A
; UeTrvMCfgNote of
N/A
UeTrv
; UeTrvMCfgNote of
N/A
UeTrv
N/A
N/A
(0..62)dB step
0.1dB
0: 4.75kbps
1: 5.15kbps
2: 5.90kbps
3: 6.70kbps
4: 7.40kbps
0:
5: 6.60kbps
7.95kbps
1:
6: 8.85kbps
10.2kbps
2:
7: 12.65kbps
12.2kbps
3: 14.25kbps
4: 15.85kbps
5:
18.25kbps
Bit0=0/1:
R4
6: 19.85kbps
and
Before
7:
23.05kbps
Bit1=0/1:
R5
8:
23.85kbps
Bit2=0/1:
R6
Bit3=0/1: R7
Bit4=0/1: R8
and After
Bit5-7 Reserved,
fixed
0: Offvalue 0
1: On
0..65535
(-35..+15) dB
step 0.1dB
0..65535
(1..100) % step
1%
dB
60dB
N/A
N/A
kbps
5.90kbps
N/A
N/A
kbps
15.85kbps
N/A
N/A
N/A
Bit0=0
Bit1=0
Bit2=0
Bit3=0
Bit4=0
Bit5-Bit7 =0
N/A
N/A
N/A
0: Off
N/A
N/A
100ms
30
N/A
N/A
dB
-3dB
N/A
N/A
N/A
HsGBRResLimitIdx of
GbrRes
40%
HspaSptMeth,
MinHspaPwrRto,
MaxHspaPwrRto,
HsdschTotPwrMeth
(1..100) % step
1%
70%
HspaSptMeth,
HspaPwrRatio,
MinHspaPwrRto,
HsdschTotPwrMeth
(-6..13)dB step
0.5 dB
dB
MPO_Default
HspaSptMeth
In GbrRes, there
must be a configure
Only
indexvalid when the
cell
supports HSDPA
HsGBRResLimitIdx=
and
HSPA total
CHsGBRResLmtIdx.
downlink power
allocation methodis
RNC
staticwhen
assigning
Only valid
the
mode
or
RNC
cell supports HSDPA
dynamic
assigning
and HSPA
total
mode.
downlink power
MinHspaPwrRto<=
allocation methodis
HspaPwrRatio
RNC
static assigning
<=MaxHspaPwrRto.
mode or RNC
dynamic assigning
mode.
MinHspaPwrRto<=
HspaPwrRatio
N/A
<=MaxHspaPwrRto.
Bit0=0/1:
64QAM is not
Used/ 64QAM is
Used
Bit1=0/1: MIMO
is not Used/
MIMO is Used
dB
Bit2=0/1: DCHSDPA is not
Used/ DCHSDPA is Used
Bit3-7: % step
(1..100)
Reserved,
fixed dB
1%
to 0
MPO_Default
N/A
N/A
MPO_Default
Cid of UtranCell
Only
N/A valid when the
cell supports HSDPA
and HSPA total
downlink power
allocation methodis
RNC static assigning
mode or RNC
dynamic assigning
mode.
MinHspaPwrRto<=
HspaPwrRatio
N/A
<=MaxHspaPwrRto.
(1..100) % step
1%
3%
HspaSptMeth,
HspaPwrRatio,
MaxHspaPwrRto,
HsdschTotPwrMeth
(0..100)%
15%
N/A
0..65535
N/A
DivPc
DivPcIndex of DivPc:
DivPcIndex of utranCell DivPcIndex of
utranCell must also
DivPcIndex of
utranCell: DivPcIndex exist in DivPc.
of DivPc
(-30..+30)dB
step 0.1dB
dB
DivPc
SrvType of DivPc

services.
(0..6) dB step
0.25 dB
dB
DivPc
SrvType of DivPc
Only valid for

downlink services.
NMS: (0..6) dB
step 0.25 dB
dB
NE: D=P*40..24
DivPc
SrvType of DivPc
Only valid for

downlink services.
NMS: (0..6) dB
step 0.25 dB
dB
NE: D=P*40..24
DivPc
SrvType of DivPc
Only valid for

downlink services.
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
EagchPOTti2
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
EagchPOTti10
Only valid for

downlink services.
EagchPOTti2>
EagchPOTti10 for
downlink services.
Only valid for
downlink services.
EagchPOTti2>
EagchPOTti10 for
downlink services.
Only valid for

downlink services.
EhichPOTti2>
EhichPOTti10 for
downlink services.
Only valid for
downlink services.
EhichPOTti2>
EhichPOTti10 for
downlink services.
Only valid for
downlink services.
ErgchPOTti2>
ErgchPOTti10 for
downlink services.
Only valid for
downlink services.
ErgchPOTti2>
ErgchPOTti10 for
downlink
services.
1.
Only valid
for
downlink and not
MBMS services.
2. For downlink and
not MBMS services:
MaxDlDpchPwr>=
MinDlDpchPwr.
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
EhichPOTti2
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
EhichPOTti10
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
ErgchPOTti2
(-32 ..
+31.75)dB step
0.25 dB
dB
DivPc
SrvType of DivPc,
ErgchPOTti10
(-35..15 ) dB
step 0.1 dB
dB
DivPc
SrvType of DivPc,
MinDlDpchPwr
(-50..33)dBm
step 1
dBm
DivPc
SrvType of DivPc

services.
dB
DivPc
SrvType of DivPc,
MaxDlDpchPwr
1. Only valid for

downlink and not
MBMS services.
2. For downlink and
not MBMS services:
MaxDlDpchPwr>=
MinDlDpchPwr.
(-8..0)dB step 1 dB
DivPc
SrvType of SubSrv,
MbmsInd of SubSrv,
SrvType of DivPc
Only valid for MBMS

PTM services.
(-35..15)dB step
dB
1
DivPc
SrvType of SubSrv,
MbmsInd of SubSrv,
SrvType of DivPc
Only valid for MBMS

PTM services.
0: None
1: STTD
2: Closed Loop
Mode 1
DivPc
N/A
N/A
SrvType of DivPc,
ULMaxSIR, ULMinSIR

services.
ULMaxSIR>ULInitSIR
>ULMinSIR.
(-35..15) dB
step 0.1 dB
(-8.2..17.3)dB
step 0.1 dB
N/A
dB
DivPc
(-8.2..17.3)dB
step 0.1 dB
dB
(-8.2..17.3)dB
step 0.1 dB
dB
10..256, 000,
000 bps
step 10 bps
bps
1...MAX_NUM_
HS_GBR,
N/A
MAX_NUM_HS
_GBR=33

services.
SrvType of DivPc,
DivPc
ULInitSIR, ULMinSIR
ULMaxSIR>ULInitSIR
>ULMinSIR.
The
valid
services.
SrvType of DivPc,
HsGBRLev[]
should
DivPc
ULInitSIR, ULMaxSIR have the matching
ULMaxSIR>ULInitSIR
rate
in the SubSrv,
>ULMinSIR.
and this restriction is
ensured by the
HsGBRLevNum,
engineer who
[23850, 38800, 64000,
MaxBitRate
128000,of384000,
SubSrv,768000, 1200000, 3650000, 7200000, 101000
configure the
Direction of SubSrv
parameter.
HsGBRLev[0]<
HsGBRLev[1]<
HsGBRLev[2]<...<
12
N/A
N/A
HsGBRLev[HsGBRL
evNum-1], where
HsGBRLevNum>1.
In GbrRes, there
must be a configure
CHsGBRResLmtIdx of
1
index
CHspa
HsGBRResLimitIdx=
CHsGBRResLmtIdx.
0..65535
N/A
(-35..+15) dB
step 0.1dB
dB
[3, 3.5, 4, 4.5, 5, 5.5

N/A
, 6, 6.5, 7, 7.5, 8, 8.5]dB
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
(1..60)s
6s
N/A
This parameter must

be smaller than or
equal to the RAB
response waiting
timer length which is
configured in CN.
0..8
N/A
N/A
N/A
1..4
N/A
N/A
N/A
(0, 2, 4, 8, 10,
20, 40, 80, 160, ms
16, 32, 64) ms
2ms
DtxCyc2Tti10,
DtxCyc2Tti2
0..8
N/A
N/A
The results of
DtxCyc2Tti10 and
DtxCyc2Tti2 divided
by CqiCycle/2 or
CqiCycle must be a
integer. This
restriction is ensured
by the engineer who
configure the
parameter.
N/A
1..4
N/A
CqiCycle
When CqiCycle is 0,
CqiRepFactor is
valid.
When CqiCycle is not
0, CqiCycle >= 2*
CqiRepFactor.
0..6
N/A
N/A
N/A
0..8
N/A
EdpcchPOTti2
EdpcchPOTti10
<EdpcchPOTti2
0..8
N/A
EdpcchPOTti10
EdpcchPOTti10
<EdpcchPOTti2
0: RNC Static
Assigning Mode
1: RNC Dynamic
N/A
Assigning Mode
2: NodeB
Assigning Mode
2: NodeB Assigning
N/A
Mode
N/A
0: Off
1: On
N/A
Off
N/A
N/A
0..8
N/A
N/A
N/A
0..8
N/A
N/A
N/A
0..8
N/A
N/A
N/A
0..8
N/A
N/A
N/A
0..6
N/A
ScheInfoPOTti2
ScheInfoPOTti2>=Sc
heInfoPOTti10
0..6
N/A
ScheInfoPOTti10
ScheInfoPOTti2>=Sc
heInfoPOTti10
(0.01..0.1) step
0.01
N/A
0.05
N/A
N/A
0: R99 Load
Decreasing
Algorithm
1: HS Load
Decreasing
Algorithm)
N/A
LdCtrl
N/A
N/A
0..65534
N/A
LdCtrl
CId of utranCell
For the CId in LdCtrl,

there must be a
same CId in
utranCell.
0: Off
1: On
N/A
LdCtrl
N/A
N/A
DlSeriousOverLd >
DlOverLd >
DlAlrmLd;
HsdsOverLdThr>
HsdsRecoverThr>
DlOverLd> DlAlrmLd.
(1..100)% step
1%
LdCtrl
DlSeriousOverLd,
DlOverLd,
HsdsOverLdThr,
HsdsRecoverThr
0: Off
1: On
N/A
LdCtrl
N/A
N/A
1..8
N/A
LdCtrl
N/A
N/A
0: Off
1: On
N/A
LdCtrl
N/A
N/A
0: Off
1: On
N/A
LdCtrl
N/A
1..50
N/A
LdCtrl
N/A
1..50
N/A
LdCtrl
(0..100)% step
1%
LdCtrl
(0..100)% step
1%
LdCtrl
0: Off
1: On
N/A
LdCtrl
0: Off
1: On
N/A
LdCtrl
N/A
N/A
0: Off
1: On
N/A
LdCtrl
N/A
N/A
(0..100)% step
1%
LdCtrl
HsdsRecoverThr,
DlOverLd, DlAlrmLd
HsdsOverLdThr>
HsdsRecoverThr>
DlOverLd> DlAlrmLd.
N/A
DlSeriousOverLd >
N/A
DlOverLd
>Values of
all the records of
DchDlAcThresh of
same BPriAcIndex as
that
N/A
N/A in utranCell of all
BPriAcIndex of BPriAc, PLMNs in the cell.
DchDlAcThresh,
DlSeriousOverLd
DlSeriousOverLd >
>
MbmsAcThresh,
DlOverLd
DlOverLd >Values
>Values of
of
DlSeriousOverLd,
all the
the records
records of
of
all
DlAlrmLd, BPriAcIndex MbmsAcThresh
of
DchDlAcThresh of
of utranCell;
BPriAc
which
has
the
HsdsOverLdThr,
BPriAcIndex of BPriAc, same
same BPriAcIndex
BPriAcIndex as
as
HsdsRecoverThr,
that
DchDlAcThresh of
that in
in utranCell
utranCell of
of all
all
NodeBSafeThr
PLMNs
BPriAc,
PLMNs in
in the
the cell.
cell.
DlSeriousOverLd>Dl
MbmsAcThresh of
DlSeriousOverLd>Dl
OverLd>
BPriAc, DlOverLd of
OverLd> DlAlrmLd
Values of all
HsdsOverLdThr>
LdCtrl, DlAlrmLd of
the records of
LdCtrl, BPriAcIndex of HsdsRecoverThr>
MbmsAcThresh of
DlOverLd>
DlAlrmLd;
utranCell
BPriAc which
has the
HsdsRecoverThr
same BPriAcIndex>=as
NodeBSafeThr>
N/A
N/A in utranCell of all
that
=DlOverLd.
PLMNs in the cell.
DlSeriousOverLd>Dl
OverLd> DlAlrmLd
(0..100)% step
1%
LdCtrl
HsdsOverLdThr,
DlOverLd, DlAlrmLd,
NodeBSafeThr
HsdsOverLdThr>
HsdsRecoverThr>
DlOverLd> DlAlrmLd;
HsdsRecoverThr >=
NodeBSafeThr>
=DlOverLd.
1..100
N/A
LdCtrl
N/A
N/A
0..255
N/A
LdCtrl
N/A
N/A
HsdsRecoverThr >=
NodeBSafeThr>
=DlOverLd;
HsdsRecoverThr,
NodeBSafeThr>
DlOverLd, BPriAcIndex
Values of all the
of BPriAc,
records of
HsdpaAcThresh of
HsdpaAcThresh of
BPriAc, BPriAcIndex of
utranCell
same BPriAcIndex as
that in utranCell of all
PLMNs
in the cell.
N/A
N/A
(1..100)% step
1%
LdCtrl
0: Off
1: On
N/A
LdCtrl
(0..62)dB step
0.1
dB
LdCtrl
UlSeriousOverLd,
UlOverLd
UlSeriousOverLd>Ul
OverLd >UlAlrmLd.
0: Off
1: On
N/A
LdCtrl
N/A
N/A
1..8
N/A
LdCtrl
N/A
N/A
0: Off
1: On
N/A
LdCtrl
N/A
N/A
0: Off
1: On
N/A
LdCtrl
N/A
N/A
1..50
N/A
LdCtrl
N/A
N/A
1..50
N/A
LdCtrl
N/A
(0..62)dB step
0.1
dB
LdCtrl
N/A
UlSeriousOverLd>Ul
the records of
DchUlAcThresh of
DchUlAcThresh of
BPriAc,
same BPriAcIndex as
UlSeriousOverLd,
that in utranCell of all
UlAlrmLd, BPriAcIndex
PLMNs in the cell.
of utranCell
UlSeriousOverLd>Ul
OverLd> UlAlrmLd.
(0..62)dB step
0.1
dB
LdCtrl
(0..100)% step
1%
LdCtrl
(0..62)dB step
0.1
dB
LdCtrl
0: Off
1: On
N/A
1: On
UlSeriousOverLd>Ul
the records of
DchUlAcThresh of
DchUlAcThresh of
BPriAc, BPriAcIndex of BPriAc which has the
BPriAc, UlOverLd,
same BPriAcIndex as
<
UlAlrmLd, BPriAcIndex DlHighLd
that in utranCell
of all
DchDlAcThresh
for
of utranCell
PLMNs in the cell.
the
basic priority of
UlSeriousOverLd>Ul
TrafficClass and
AMR
services
in
OverLd>
UlAlrmLd.
BasicPrio of BasPri;
BPriAc. The basic
BasicPrio and
priority
(BasicPrio)
of
UlHighLd
<
DchDlAcThresh of
AMR
services
is
get
DchUlAcThresh for
BPriAc
from
BasPri
the basic
priority of
TrafficClass and
according
to in
AMR services
BasicPrio of BasPri;
TrafficClass=0.
BPriAc.
The basic
BasicPrio and
priority (BasicPrio) of
DchUlAcThresh of
AMR services is get
BPriAc
from BasPri
according to
TrafficClass=0.
N/A
N/A
(-15..0) dB step
dB
1
-5
N/A
N/A
(-15..0) dB step
dB
1
-7
N/A
N/A
0..15
N/A
ThreshForIsd
ThreshForHalfIsd>Th
reshForIsd
0..15
N/A
ThreshForHalfIsd
ThreshForHalfIsd>Th
reshForIsd
(-10..5)dB step
1dB
dB
-6dB
N/A
N/A
0: None
1: Common
N/A
Common
N/A
N/A
(-22..5)dB step
1dB
dB
-7dB
N/A
N/A
(2..200) Frames
Frames
step 1
(0..7)Frames
step 1
Frames
(-10.. 5) dB step
dB
1dB
N/A
0 Frames
N/A
-7dB
Np of Pich
N/A
PICH power and the
number of paging
indicators per PICH
frame have the
N/A
following relationship:
Np
PichPwr
18
-7
36
-7
(0..7)Frames
step 1
Frames
7Frames
N/A
72
N/A
-5
144
-2
(-50, ...50)dB
step 0.1dB
dB
1dB
N/A
N/A
(-50, ...50)dB
step 0.1dB
dB
2dB
N/A
N/A
(-50, ...50)dB
step 0.1dB
dB
0dB
N/A
N/A
(-50, ...50)dB
step 0.1dB
dB
0dB
N/A
N/A
(-50, ...50)dB
step 0.1dB
dB
4dB
N/A
N/A
(-35..15)dB step
dB
0.1dB
-3dB
N/A
N/A
(10.0..50.0)dBm
step 0.1dBm
33dBm
MAXDlTxPwr of
utranCell
PcpichPwr<=
MAXDlTxPwr.
dBm
(-35..-10)dB
step 1dB
dB
CellRadius_DefaultRachTti of Prach
For all PRACH of a

cell, the ConstVal
must be same for the
RACH bear on the
PRACH with the
same TFS and TTI.
(-50..33)dBm
dBm
24dBm
N/A
N/A
(-35..+15) dB
step 0.1dB
dB
-3dB
N/A
N/A
(0..65535)kbps
step 1kbps
kbps
[12, 12, 12, 12, 12,N/A

24, 24, 24 24, 24, 24, 96,
N/A
96, 96, 96, 96] kbps
(0..65535)kbps
step 1kbps
kbps
[12, 12, 12, 12, 12,N/A

24, 24, 24 24, 24, 24, 96,
N/A
96, 96, 96, 96] kbps
[-50, 0]dB step

0.1 dB
dB
MaxDlDpchPO
N/A
N/A
[-50, 0]dB step

0.1 dB
dB
MaxUlDpchPO
N/A
N/A
0: Off (Not Need

Dynamic
Update)
N/A
1: On(Need
Dynamic
Update)
0: Off (Not Need Dynamic

N/A
Update)
N/A
0: Off
1: On
0: Off
N/A
N/A
(-35..15)dB step
dB
0.1 dB
1dB
N/A
N/A
(0..6)dB step
0.25 dB
3dB
N/A
N/A
N/A
dB
(0..6)dB step 0.25dB

dB
3dB
N/A
N/A
(-35..+15)dB step0.1dB
dB
0dB
N/A
N/A
(-35..+15) dB stepdB
0.1dB
-4dB
N/A
N/A
0..255
N/A

services.
0..255
N/A

services.
(1..65535)TBs
TB
Only valid when

SrvType is 10 or 28.
RNC OMCR0
0..255
(1..50)TBs
Only valid when

0 N/A
1 6.309573444801915e-007
TrfPcLoadScene
2 SrvType
7.943282347242824e-007
of TrfPc
3 1.000000000000000e-006 4
N/A
TBs
(0..15) step 0.01 N/A
SrvType of TrfPc,
NhrThrDownTti2[],
(0..15) step 0.01 N/A
SrvType of TrfPc,
NhrThrDownTti2[],

services.
services.
2.For
uplink
services:
Only valid
when
NhrThrDownTti2[0]
<=
NhrThrDownTti2[1]
<=
NhrThrDownTti2[2]
services.
3.For
2.For uplink
uplink services:
services:
NhrThrDownTti2[0]
NhrThrUpTti2[0] <=
<=
NhrThrUpTti2[0]
NhrThrUpTti2[1]
<=
For
uplink services:
NhrThrUpTti2[2]
NhrThrDownTti2[1]
<=
NhrThrUpTti2[1]
NhrThrDownTti2[0]
For
uplink services:
<= NhrThrUpTti2[0]
NhrThrDownTti2[2]
<=
NhrThrUpTti2[2].
NhrThrDownTti2[1]
<= NhrThrUpTti2[1]
NhrThrDownTti2[2]
<= NhrThrUpTti2[2].
1.2589
0..255
N/A

services.
0: Off
1: On
N/A
0: Off
N/A
hour
0..65535
N/A
StartTimetoClos
eF[0] [0, 23]
step 1
minute
StartTimetoClos
h: m: s
eF[1] [0, 59]
step 1
second
StartTimetoClos
eF[2]24]hours
[0, 59]
[0.1,
hour
step
step 1
0.1hour
[1, 65535]s step

s
1s
N/A
DivPcIndex of DivPc
CloseFreFunSwit,
[7 0 0] (The time is 7: 00: 00)
StartTimetoClsF
0.5hour
300s
CloseFreFunSwit
CloseFreFunSwit
EndTimetoClsF
DivPcIndex of is
valid
only must
whenalso
utranCell
CloseFreFunSwit
is
exist in DivPc.
1.
The value of
StartTimetoClsF and
EndTimetoClsF is
different.
EndTimetoCloseF[3]
is an array. The
maximum
numberis
ForbTimAftOpnF
and valid
valid
only number
when of
array
elements areis
CloseFreFunSwit
both
3.
1.
FreClsOpnTrigTm is
valid only when
CloseFreFunSwit is
1.
OpenFreAlg is valid
only when
0: Based on the Time
N/A to Switch On2:Frequency1:
Based on Time
Based
or
CloseFreFunSwit
Whether
on Whether
the the
Working
Working
CellCell
is Congested
is Congested
to Switch
to Switch
On On
Frequency
Frequenc
CloseFreFunSwit is
1.
0:
NodeB
hour
N/A
1:
RNC
StartTimetoClos
eF[0] [0, 23]
step 1
minute
StartTimetoClos
H: M: S
eF[1] [0, 59]
step 1
second
StartTimetoClos
eF[2] [0, 59]
0..65535
N/A
step 1
[0, 100] step 1
N/A
NodeB
N/A
CloseFreFunSwit,
[22 0 0] (The time is 22: 00: 00)
EndTimetoClsF
TrfPcIndex of TrfPc
CloseFreFunSwit
1. StartTimetoClsF is
valid
N/A only when
CloseFreFunSwit is
1.
2. The value of
StartTimetoClsF and
EndTimetoClsF
should be different.
3. StartTimetoClsF[3]
is an array. The
maximum
number in
For the TrfPcIndex
and valid number
of
utranCell,
there must
array
elements are
be a same
both
3.
TrfPcIndex
in TrfPc.
UeNumThreshCls is
valid only when
CloseFreFunSwit is
1.
0..65535
N/A
64
N/A
N/A
0: Not Supported1:
N/A
Supported
0: Supported
EFACHSpptInd
Only valid when both

EFACHSpptInd in
utranCell with the
value 1.
0: False1: True
0: False
N/A
N/A
(-5..10)dB step 1dB

dB
2dB
N/A
N/A
(0..15) TTIs step 1TTI

TTI
N/A
N/A
0..32
10
N/A
N/A
N/A
N/A
Enumerated (8, 12,

TTI
16, 24, 32, 40, 8TTIs
80, 120) Interms of
N/A
TTIs
N/A
Enumerated (0, 8,TTI

16, 24, 40, 80, 120,
0 infinity) In terms
N/A
of TTIs
N/A
INTEGER(8..24) Interms
TTI
of TTIs 24TTIs
N/A
N/A
1: Algorithm 12: Algorithm

N/A
2
Algorithm 1
N/A
N/A
(1, 2)dB
1dB
N/A
N/A
dB
(2ms, 10ms,
20ms, 50ms,
100ms, 200ms,
500ms,
1000ms)
ms
50ms
0: Dedicated
HSPA
1: Common EDCH
N/A
0: Dedicated HSPA1:
N/ACommon E-DCH
N/A
(-6..13)dB step
0.5 dB
dB
6dB
N/A
N/A
(0..65535)kbps
step 1 kbps
kbps
1024kbps
UlEfachMaxrate
MaxBitRateCEdch<=
UlEfachMaxrate
(-8.2..17.3)dB
step 0.1 dB
dB
8dB
N/A
N/A
0: Not
Supported
1: Supported
N/A
N/A
N/A
[-35, 15.1]dB
step 0.1dB
dB
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(-31..31)dB step
dB
0.5dB
(1..65535) kbps
kbps
step 1kbps
(-50...0)dB step
dB
0.1dB
0: Not
Supported
1: Supported
N/A
1. NbDMCfgNote
1: Supported
=2
(Event A
Report
Parameters
1. Event E for
TCP
in DASFReport
15.1dB
(F-DPCH
PS):
[-0.4dB
Parameters
for
initial
power
is
-0.4dB
-0.4dB];
SIR Error
in
decided
by
2.
NbDMCfgNote
Outer
Loop
NodeB)
=3(Event
B
Power Control:
Report
4dB
Parameters
2. Event F for
TCP
in DASFNbDMCfgNote
Report
PS):
[-1.6dB
=2
or
3 (Event
Parameters
for
-1.6dB
-1.6dB];
A/B
SIR Report
Error
in
3.
NbDMCfgNote
Parameters
Outer
Loop for
=7
(Event
A
TCP
in Control:
DASFPower
Report
PS):
[64,
-4dB
Parameters
for
128]kbps
3. Other
TCP
in
AMR):
[- Other
measurements:
0.4dB
- -];
measurements:
4.
NbDMCfgNote
need
not be
=8(Event
B
configured.
Report
Parameters for
TCP in AMR): [1.6dB - -];
5. NbDMCfgNote
=9
(Event
A
0: Not
Supported
Report
Parameters for
TCP in Handover
Control): [-0.4dB
- -];
6. NbDMCfgNote
=10 (Event B
Report
Parameters for
TCP in Handover
Control): [-1.6dB
- -];
N/A
N/A
0: Normal Load
Cell
1: High Load
Cell
N/A
0: Normal Load
Cell
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
7dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
7dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
8dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
8dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
0dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
0dB
N/A
N/A
(-63.75 ..
+63.75)dB step
0.25 dB
dB
6dB
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
0..65535
N/A
1: E-DCH User
Number Low
Level;
2: E-DCH User
Number Medium N/A
Level;
3: E-DCH User
Number High
Level
[2, 4]
EdchNumLev[]
EdchNumLev[0]<
EdchNumLev[1]
2: E-DCH User
Number Medium N/A
Level
N/A
0: Off (Not Need

Dynamic
Adjustment)
N/A
1: On (Need
Dynamic
Adjustment)
1: UE Traffic
Volume Event
Measurement
N/A
Configuration
Number for DCH
Off (Not Need

Dynamic
Adjustment)
N/A
N/A
1: UE Traffic
Volume Event
Measurement
N/A
Configuration
Number for DCH
N/A
[0, 10]dB step

0.1dB
dB
1dB
N/A
N/A
[0, 50] step 1
N/A
33
N/A
N/A
[0, 1000] unit:

100ms
100ms
10 (unit: 100ms) N/A
N/A
0-65534
N/A
SrvType&TrafficClass&MaxBitRate'!A1
SrvType of SubSrv
SrvType in TrfPc
must also in SubSrv.
(0..215-1)m
meter
N/A
N/A
(0...990)m
meter
N/A
N/A
N/A
N/A
N/A
(0..215-1)m
meter
N/A
N/A
0: Height
1: Depth
N/A
N/A
N/A
0: Height
Depth
1:
OMCR: (0..
90)step 1"
RNC: 0..2^23-1
When the value
configed with
OMCR is 90,
the value of
RNC is 2^23-1 .
0: North
1: South
OMCR: (-180..
180)step 1"
RNC: 0..2^24-1
When the value
configed with
OMCR is 180,
the value of
RNC
is 2^24-1 .
0: Omni
Antenna
1: Beam
Antenna
0: Center Point
with Altitude and
Cell Radius
1: Polygon
2: Arc
0: Ellipsoid Point
1: Ellipsoid Point
with Uncertainty
(0..1806627)m
Circle
2: Ellipsoid Point
with Uncertainty
Ellipse
3: Ellipsoid Point
with Altitude
4: Ellipsoid Point
with Altitude and
Uncertainty
Ellipsoid
5:
List of
(0..100)%
Ellipsoid Points
6: Ellipsoid Arc
Degree
N/A
N/A
N/A
N/A
N/A
Degree
N/A
N/A
N/A
Only when AnteType

AnteType, OffsetAngle, is 1(Beam Antenna),
0: Omni Antenna
InnerAngle
OffsetAngle/InnerAng
le are Valid
N/A
0: Center Point
with Altitude and N/A
Cell Radius
meter
N/A
N/A
CellDescripType,
GARptType
N/A
N/A
Only when AnteType

InnerAngle
le are Valid
N/A
N/A
N/A
N/A
OMCR:
(0..360)
Degree
RNC: (0..360)
OMCR: (0..
90) step 1"
RNC: 0.. 2^23-1
When the value
configed with
Degree
OMCR is 90,
the value of
RNC is 2^23-1.
0: North
1: South
N/A
N/A
when
N/A
CellDescripType set
0, GARptType can be
set 0, 1, 2, 3, 4;
when
CellDescripType set
1, GARptType can be
set 5;
when
CellDescripType set
2, GARptType can be
N/A6;
set
OMCR: (-180..
180) step 1"
RNC: 0..2^24-1
When the value
configed with
Degree
OMCR is 180,
the value of
RNC is 2^24-1
OMCR:
(0..360)
Degree
RNC: (0..360)
N/A
N/A
1)PolyLatitudeSign[1
5], PolyLatitude[15],
PolyLongitude[15]
OnlyList,
when
are
theAnteType
is
1(Beam number
Antenna),
maximum
is
15.PolygonPointNum
le
are Valid
indicates
the valid list
length of
PolyLatitudeSign[15],
PolyLatitude[15],
PolyLongitude[15].
2) only when
5],
PolyLatitude[15],
CellDescripType
is
PolyLongitude[15]
set 1(Polygon) , the
are
List,ofthe
values
paramters
maximum
number is
N/A
PolygonPointNum,
15.PolygonPointNum
indicates
the valid list
5],
PolyLatitude[15],
PolyLatitude[15],
length
of
PolyLongitude[15]
PolyLongitude[15]are
are
List, the
valid.
PolyLatitude[15],
maximum number is
PolyLongitude[15].
15.PolygonPointNum
2)
only when
indicates
the valid list
CellDescripType
is
length of
set
1(Polygon)
,
the
values of paramters
PolyLatitude[15],
PolygonPointNum,
PolyLongitude[15].
2) only when
PolyLatitude[15],
CellDescripType is
set
1(Polygon)
, the
Only
when
valid.
values of paramters
GpsInfoRoot
set
PolygonPointNum,
0(self), GpsCardType
is valid.
PolyLatitude[15],
valid.
N/A
N/A
N/A
second
600s
N/A
N/A
N/A
0: Not Support
PsInterSysHoSupp of
rncBRnc
N/A
3..
MAX_POINT_N
UM
And,
N/A
MAX_POINT_N
OMCR: (0..
UM=15
90)
step 1";
RNC: 0..2^23-1
When the value
configed with
Degree
OMCR is 90,
the value in
RNC is 2^23-1.
0: North; 1:
N/A
South
OMCR: (-180..
180) step 1";
RNC: 0..2^24-1
When the value
Degree
configed with
OMCR is 180,
the value of
0:
Self;
RNC
is 1:
2^24-1 .
Neighbouring
RNC;
N/A
2: Exterior
Network
0: Not upported
1: Supported
0: Not upported
1: Supported
0..65535 S
0: Not Support
1: Support
N/A
AnteType, OffsetAngle,
InnerAngle
Self
PolygonPointNum of
UtranCell/externalUtran
PolygonPointNum,
Cell,
PolyLatitudeSign[MAX_
PolyLatitude[15],
POINT_NUM]
of
PolyLongitude[15],
CellDescripType
Cell,
PolyLatitude[MAX_POI
NT_NUM] of
Cell,
PolyLongitude[MAX_P
PolygonPointNum,
OINT_NUM] of
PolyLatitude[15],
Cell, CellDescripType
PolyLongitude[15],
of
CellDescripType
Cell
PolygonPointNum,
PolyLatitude[15],
PolyLongitude[15],
CellDescripType
GpsInfoRoot,
GpsCardType
0: Not upported
1: Supported
N/A
N/A
1: Allowed
N/A
N/A
0: Not Support
Cell ID
Positioning and
AGPS
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: Not Support
N/A
N/A
N/A
N/A
0: Not
Not Allowed
0:
Support
1:
Allowed
Cell
ID
N/A
Positioning and
AGPS
1: Only Support
Cell ID
Positioning , Not
N/A
Support AGPS
2: Support Cell
ID Positioning
and
AGPS
0: Not
Supported
N/A
1: Supported
0: Not upported
1: Supported
0: Not upported
1: Supported
0: Not
Supported
1: Support
0: Not upported
1: Supported
0: Not upported
1: Supported
0: Not Support
1: Support
0: Not upported
1: Supported
0: Not
Supported
1: Supported
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3: Prior to InterRAT (prior to

GSM), secondly Twait of utranCell
to InterFrequency
N/A
meter
N/A
N/A
meter
N/A
N/A
0: Height; 1:
Depth
N/A
N/A
N/A
(0..2^15-1)m
meter
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: Off
0: Prior
Not upported
1:
to Inter1:
Supported
Frequency,
secondly to
Inter-RAT (prior
to GSM Cell)
2:
to Inter0: Prior
Not upported
Frequency,
1: Supported
secondly to
Inter-RAT (PS
prior to E-UTRA,
CS prior to
GSM)
3: Prior to InterRAT (prior to
GSM), secondly
to InterFrequency
4:
Prior to Inter(0..2^15-1)m
RAT (PS prior to
E-UTRA, CS
prior to GSM),
secondly to
Inter-Frequency
(0...990)m
0: Height ; 1:
N/A
Depth
OMCR: (0..
90)step 1";
RNC: 0..2^23-1
When the value
configed with
Degree
OMCR is 90,
the value of
RNC is 2^23-1 .
0: North; 1:
South
N/A
OMCR: (-180..
180)step 1"
RNC: 0..2^24-1
When the value
configed with
Degree
OMCR is 180,
the value of
RNC is 2^24-1 .
0: Omni
Antenna; 1:
N/A
Beam Antenna
0: Center Point
with Altitude and
Cell Radius
N/A
1: Polygon
2: Arc
(0..1806627)m
meter
N/A
N/A
Only when AnteType

0: Omni Antenna
InnerAngle
le are Valid
0: Center Point with

N/A
Altitude and Cell Radius
N/A
N/A
N/A
0: False
N/A
N/A
N/A
N/A
N/A
CellDescripType,
GARptType
Degree
CellDescripType,
GARptType
Degree
N/A
when
N/A
CellDescripType set
0, GARptType can be
set 0, 1, 2, 3, 4;
when
CellDescripType
set
when
1,
GARptType
can
CellDescripType setbe
set
5;
0, GARptType
can be
when
set 0, 1, 2, 3, 4;
CellDescripType
set
when
2, GARptType can
CellDescripType
setbe
set
6;
1, GARptType
can be
set 5;
when
CellDescripType set
2, GARptType can be
N/A6;
set
N/A
N/A
N/A
N/A

0: Ellipsoid Point
1: Ellipsoid Point
with Uncertainty
(0..100)%
Circle
2: Ellipsoid Point
with Uncertainty
Ellipse
3: Ellipsoid Point
with Altitude
4: Ellipsoid Point
with Altitude and
Uncertainty
Ellipsoid
OMCR:
5:
List of
(0..360)RNC:
Ellipsoid
Points
(0..360)
OMCR:
(0..Arc
6: Ellipsoid
90) step 1"
RNC: 0.. 2^23-1
When the value
configed with
OMCR is 90,
the value of
RNC is 2^23-1.
0: North; 1:
Degree
South
OMCR: (-180..
180) step 1"
RNC: 0..2^24-1
When the value
Degree
configed with
OMCR is 180,
the value of
RNC is 2^24-1
0..65535
N/A
PolyLongitude[15]
OnlyList,
when
are
theAnteType
AnteType, OffsetAngle, is
1(Beam number
Antenna),
maximum
is
InnerAngle
15.PolygonPointNum
le
are Valid
indicates
the valid list
length
of
PolyLongitude[15]
PolygonPointNum,
are
List, the
PolyLatitude[15],
maximum
number is
PolyLatitude[15],
PolyLongitude[15].
15.PolygonPointNum
PolyLongitude[15],
2)
only when
indicates
the valid list
CellDescripType
5],
PolyLatitude[15],
CellDescripType
is
length
of
PolyLongitude[15]
PolygonPointNum,
set
1(Polygon)
,
the
are
List,ofthe
values
paramters
PolyLatitude[15],
maximum
number is
PolyLatitude[15],
PolygonPointNum,
PolyLongitude[15].
15.PolygonPointNum
PolyLongitude[15],
2)
only when
indicates
the valid list
CellDescripType
5],
PolyLatitude[15],
PolyLatitude[15],
CellDescripType
is
length
of
PolyLongitude[15]
PolygonPointNum,
set
1(Polygon)
,
the
are
List,ofthe
valid.
values
paramters
PolyLatitude[15],
maximum
number is
PolyLatitude[15],
PolygonPointNum,
PolyLongitude[15].
15.PolygonPointNum
PolyLongitude[15],
2)
only when
indicates
the valid list
CellDescripType
PolyLatitude[15],
CellDescripType
is
length
of
PolygonPointNum,
set
1(Polygon)
,
the
valid.
values of paramters
PolyLatitude[15],
PolyLatitude[15],
PolygonPointNum,
PolyLongitude[15].
PolyLongitude[15],
2) only when
CellDescripType
PolyLatitude[15],
CellDescripType is
set 1(Polygon) , the
valid.
values of paramters
N/A
PolygonPointNum,
PolyLatitude[15],
valid.
CNbCom
NbCMCfgNo
N/A
0: Not
Supported
1: Supported
N/A
N/A
0: Not
Supported
1: Supported
N/A
N/A
0: RNC Centric
Mode
1: SAS Centric
Mode
N/A
1: SAS Centric Mode

N/A
0: Inactive
1: Active
N/A
OMCR:
(0..360)RNC: Degree
(0..360)
3..
MAX_POINT_N
UM
And,
N/A
MAX_POINT_N
OMCR: (0..
UM=15
90)
step 1";
RNC: 0..2^23-1
When the value
configed with
Degree
OMCR is 90,
the value in
RNC is 2^23-1.
0: North; 1:
N/A
South
OMCR: (-180..
180) step 1";
RNC: 0..2^24-1
When the value
Degree
configed with
OMCR is 180,
the value of
RNC is 2^24-1 .
0: Not
Supported; 1:
N/A
Supported
HspaSptMeth
hsuStat
When HspaSptMeth
N/A
is set 1(Support
HSDPA and DCH),
2(Support HSDPA
only), 3(Support
HSUPA , HSDPA and
DCH), 4(Support
HSUPA and HSDPA),
hsdStat is valid.
When the value of
hsdStat is 0(Inactive),
the value of hsuStat
must be 0(Inactive).
When HspaSptMeth
is set 3(Support
HSUPA , HSDPA and
DCH), 4(Support
HSUPA and HSDPA),
hsuStat is valid.
When the value of
hsdStat
is 0(Inactive),
When MbmsSuptInd
the
value
of hsuStat
is set 1(Support
must beand
0(Inactive).
MBMS
not
MBMS), 2 (Only
Support MBMS),
mbmsStat
is valid.
When ComMeasType
is set UTRAN GPS
Timing of Cell
Frames for UE
When
ComMeasType
Positioning,
this
is
set UTRAN
GPS
parameter
is valid.
Timing of Cell
Frames for UE
Positioning and
RptType
is set On
When ComMeasType
Modification,
is
set UTRAN GPS
OnModChangTime
is
Timing of Cell
valid.
Frames for UE
Positioning and
RptType is set On
Modification,
The
value of
OnModDeviTime
NbCModTUGps inis
valid.
CNbCom must
correspond to the
CMCfgNo parameter
in NbCom.
0: Inactive
1: Active
N/A
HspaSptMeth
hsdStat
0: Inactive
1: Active
N/A
MbmsSuptInd
0: Accuracy
Class A
1: Accuracy
Class B
2: Accuracy
Class C
N/A
2: Accuracy
Class C
ComMeasTyp
(1/16..16) chips
chips
step 1/16chip
1chips
ComMeasType,
RptType
(1/16..16) chips
chips
step 1/16chip
1chips
ComMeasType,
RptType
0..65535
N/A
NbCMCfgNo
2..3
N/A
N/A
N/A
1..300 Unit:
100ms
100ms
50
N/A
N/A
1..300 Unit:
100ms
100ms
50
N/A
N/A
(1..120)s
8s
N/A
N/A
(5..60)s
18s
N/A
N/A
1..300 Unit:
100ms
100ms
80
N/A
N/A
1..300 Unit:
100ms
100ms
60
N/A
N/A
50..600 Unit:
100ms
100ms
80
N/A
N/A
0..1200 Unit:
100ms
100ms
50
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
N/A
1 Version1 Prefer N/A
N/A
2 Version2 Prefer N/A
N/A
0: Not Support SCUDIF

N/A
N/A
1 Version1
Prefer
2 Version2
Prefer
1 Version1
Prefer
2 Version2
N/A
Prefer
0: Not Support
SCUDIF
1: Support
SCUDIF, CS64
N/A
Service
Established by a
RB
0: Off
1: On
N/A
0: Off
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
(1..100)%
0.7
N/A
N/A
0: Off
1: On
0:
Off
OMCR:
1:
On
(4000[0],
0: Off, 1: On
6000[1],
Bit0: Handover
8000[2],
Period Intra12000[3],
frequency
16000[4],
Measurement
20000[5],
OMCR:
4000[0],
Type
Switch
24000[6],
6000[1],
Bit1:
Power
28000[7],
8000[2],Internal
Period
32000[8])ms
12000[3],
Measurement
RNC:
0-8
16000[4],
Type Switch
20000[5],
Bit2: Quality
24000[6],
Period
Quality
28000[7],
Measurement
0:
32000[8]ms;
Type
Switch
Acknowledged
RNC:Period
0-8
Bit3:
Mode
RLC; 1:
Location
Unacknowledge
Measurement
d Mode
RLC
Type
Switch
Bit4: Call-initial
Measurement
Switch
Bit5: Event Intrafrequency/Interfrequency/InterRAT
Measurement
(0..7)
Type Switch
Bit6: Event
Internal
Measurement
Type Switch
(0..7)
Bit7: Event
Quality
Measurement
Type Switch
Bit8: Event
(0..7) Volume
Traffic
Measurement
OMCR:
(1[0],
Type Switch
2[1], 4[2], 10[3],
20[4], 50[5],
100[6], 200[7],
400[8], 600[9],
800[10],
OMCR: (1[0],
1000[11]);
RNC:
2[1], 4[2], 10[3],
(0..11)
20[4], 50[5],
100[6], 200[7],
400[8], 600[9],
800[10],
1000[11]); RNC:
( 0..11)
N/A
Off
N/A
N/A
N/A
0: Off
N/A
N/A
ms
4000ms
N/A
N/A
ms
8000ms
N/A
N/A
N/A
0: Acknowledged
N/A
Mode RLC
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OMCR: (1[0],
2[1], 4[2], 10[3],
20[4], 50[5],
100[6], 200[7]);
OMCR:
(1[0],
RNC: (0..7)
2[1], 4[2], 10[3],
20[4], 50[5],
OMCR:
(100[0],
100[6],
200[1], 200[7],
400[2],
400[8],
600[3], 600[9],
800[4],
800[10],
1000[5],
1000[11]);
1200[6], RNC:
(0..11)
1400[7],(100[0],
OMCR:
1600[8],
200[1], 400[2],
1800[9],
600[3], 800[4],
2000[10],
1000[5],
3000[11],
1200[6],
4000[12],
1400[7],
6000[13],
1600[8],
8000[14])ms,
1800[9],
RNC:
(0..14)
2000[10],
3000[11],
OMCR:
(100[0],
4000[12],
200[1],
400[2],
6000[13],
1000[3],
8000[14])ms;
2000[4])ms;
RNC: ( 0..14)
OMCR:
( No
RNC: ( 0..4)
update[0], 5[1],
10[2], 30[3],
60[4], 120[5],
360[6],
720[7])minutes,
RNC: (0..7)
OMCR:
step1 (5[0],
10[1], 15[2],
20[3], 30[4],
40[5], 50[6])s ,
RNC: ( 0..6)
N/A
50
N/A
N/A
N/A
N/A
N/A
N/A
2000ms
N/A
N/A
ms
1000ms
N/A
N/A
ms
2000ms
N/A
N/A
min
5min
N/A
N/A
30s
N/A
N/A
OMCR: (40[0],
80[1], 160[2],
ms
320[3])ms, RNC:
(0..3)
40ms
N/A
N/A
(1..8)s
N/A
8s
N/A
N/A
(1..15)s
N/A
1s
N/A
N/A
(1..15)s
N/A
2s
N/A
N/A
(0..15)s
WORD
0: Off
OMCR:
1:
On (0[0],
2[1], 4[2],
6[3],
Bit0:
Received
8[4], 12[5],
Total
Wide Band
16[6], 20[7])s;
Power
RNC: (0..7)
Measurement
OMCR: (0[0],
Switch
10[1], 30[2],
Bit1:
60[3],
180[4],
Transmitted
600[5],
1200[6],
Carrier Power
1800[7])s;
RNC:
Measurement
(0..7)
Switch
OMCR:
(0[0],
Bit2:
10[1],
20[2],
Acknowledged
30[3],
40[4],
PRACH
50[5],
Infinity[6] )
preambles
s,
RNC:
(0..6)
Measurement
Switch
(10..256,
000,
Bit3:
UTRAN
000) bps
stepof
GPS
Timing
10 bps
Cell
Frames for
0
Off
UE
Positioning
1
Replaced
Measurement
Mode
Switch
2
Minimum
Bit4:
Mode
Transmitted
3
Maximum
carrier
power of
Mode
all codes not
used for HSPDSCH, HSSCCH, EAGCH, E-RGCH
or E-HICH
transmission
Measurement
1-65535
Switch
Bit5: HS-DSCH
Required Power
Measurement
Switch
0:
Off
Bit6:
1:
OnHS-DSCH
Provided Bit
Rate
Measurement
Switch
(10..256, 000,
Bit7:
000) E-DCH
bps step
Provided
10 bps Bit
Rate
0 Off
Measurement
1 Replaced
Switch
Mode
Bit8:
E-DCH
2
Minimum
Non-serving
Mode
Relative
Grant
3 Maximum
Down
Mode
Commands
Measurement
Switch
Bit9-15:
Reserved, Fixed
to 0
N/A
3s
N/A
N/A
N/A
4s
N/A
N/A
N/A
30s
N/A
N/A
N/A
0s
N/A
N/A
bps
21.096Mbps
N/A
N/A
N/A
0 Off
N/A
N/A
N/A
0: Off
N/A
N/A
N/A
N/A
N/A
N/A
0: Off
N/A
N/A
bps
5.76Mbps
N/A
N/A
N/A
0 Off
N/A
N/A
The first
instance of the
parameter
corresponds to
Access Class 0,
the second to
Access Class 1
and so on up to
Access Class
15. UE reads
N/A
this IE of its
access class
stored in SIM.
Bitstring(16)
1:
Barred
Bit0
- bit15
N/A
2:
Not Barred
correspond
to
AC0-AC15
0: Barred
1: Not Barred
0: Reserved
N/A
1: Not Reserved
65535
N/A
N/A
CelSel_Default
N/A
N/A
CelSel_Default
N/A
N/A
0..65534
N/A
N/A
N/A
(-4..-2)dB
Step2dB
dB
-2dB
DltaQRxLevMinPr of
CelSel
N/A
0: False
1: True
N/A
QRxLevMin of CelSel
N/A
0: False
1: True
N/A
CelSel_Default
UseOfHCS of utranCelll N/A
0: Allowed
N/A
CelSel_Default
N/A
N/A
(1..4.75) step
0.25
N/A
CelSel_Default
InterFreqSfPre of
CelSel
N/A
0: False
1: True
N/A
CelSel_Default
N/A
N/A
(1..4.75) step
0.25
N/A
CelSel_Default
InterRatSfPre of CelSel N/A
0: False
1: True
N/A
CelSel_Default
N/A
N/A
1..16
CelSel_Default
HcsSrvCelInfoPre of
CelSel, TcrMax of
CelSel
N/A
1..16
N/A
CelSel_Default
NoHcsTcrMax of CelSel N/A
(Not Used, 30,

60, 120, 180,
240)S
CelSel_Default
InterRatSfPre of CelSel N/A
(Not Used, 10,

20, 30, 40, 50,
60, 70)s
CelSel_Default
NoHcsTcrMax of CelSel N/A
0: Reserved
N/A
1: Not Reserved
Not Reserved
N/A
N/A
0 : False
1: True
N/A
CelSel_Default
N/A
N/A
(-24..0)dB step
0.5dB
dB
-12dB
N/A
N/A
(-115..-26)dBm
step 1dBm
dBm
-92dBm
N/A
N/A
(0..40)dB step2
dB
dB
CelSel_Default
N/A
N/A
(0..40)dB step
1dB
dB
CelSel_Default
Sib3orSib4 of CelSel
N/A
(0..40)dB step
1dB
dB
CelSel_Default
N/A
(0..40)dB step 2
dB
dB
CelSel_Default
QualMeas of CelSel
N/A
(0..40)dB step
1dB
dB
CelSel_Default
Sib3orSib4 of CelSel,
QualMeas of CelSel
N/A
(0..40)dB step
1dB
dB
CelSel_Default
Sib3orSib4 of CelSel,
QualMeas of CelSel
N/A
(-24..0)dB step
dB
1dB
-18dB
N/A
N/A
(-115..-25)dBm
step 2dBm
-115dBm
N/A
N/A
1: CPICH Ec/No
N/A
2: CPICH RSCP
CelSel_Default
N/A
N/A
(1..91)dB step
2dB
dB
CelSel_Default
OtherRATInfoPre of
CelSel
N/A
0: False
1: True
N/A
CelSel_Default
OtherRATInfoPre of
CelSel
N/A
0: SIB3
1: SIB4
N/A
CelSel_Default
SIB4Ind of CelSel
N/A
(0..20 )dB Step

2dB
dB
CelSel_Default
SinterSearchPre of
CelSel
N/A
dBm
0: False
1: True
N/A
CelSel_Default
N/A
N/A
(0..20 )dB Step

2dB
dB
CelSel_Default
SintraSearchPre of
CelSel
N/A
0: False
1: True
N/A
CelSel_Default
N/A
N/A
(0..20 )dB
Step2dB
dB
CelSel_Default
OtherRATInfoPre of
CelSel
N/A
(0..1) step 0.1
N/A
CelSel_Default
SpSfPre of CelSel
N/A
0: False
1: True
N/A
CelSel_Default
N/A
N/A
(1..91)dB
step2dB
dB
CelSel_Default
SSearchHCSPre of
CelSel
N/A
N/A
CelSel_Default
N/A
N/A
(0..20 )dB Step

2dB
dB
CelSel_Default
OtherRATInfoPre of
CelSel
N/A
(10, 20, 40, 80,

160, 320, 640,
1280)s
CelSel_Default
N/A
N/A
(Not Used, 30,

60, 120, 180,
240)s
CelSel_Default
HcsSrvCelInfoPre of
CelSel
N/A
0: False
1: True
(Not Used, 10,

20, 30, 40, 50,
60, 70)s
CelSel_Default
HcsSrvCelInfoPre of
CelSel, TcrMax of
CelSel
N/A
(0..31)s step 1s s
CelSel_Default
N/A
N/A
(0..6.2)s step
0.2 s
CelSel_Default
N/A
(0..31)s step 1s s
CelSel_Default
N/A
0: Off
1: On
Off
N/A
N/A
CelSel_Default
N/A
N/A
N/A
0: CPICH Ec/No
1: CPICH RSCP N/A
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Inter, TrfCategory of
Cinter
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
0..65535
N/A
CInterDefault
0..65535
N/A
CInterDefault
0..65535
N/A
CRATDefault
N/A
N/A
0..65535
N/A
CRATDefault
N/A
N/A
CInterDefault
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
N/A
0..65535
N/A
N/A
N/A
1: RT RAB
Excluding Voice
2: Single NRT
on DL DCH/UL
DCH
3: Single NRT
RAB on DL HSDSCH/UL DCH
4: Single NRT
0..65535
RAB on DL HSDSCH/UL EDCH
5: All Multi-NRT
RAB on DL
DCH/UL DCH
6: Multi-NRT
RAB, HSPA is
Involved and
only DCHs are
Used
in UL
0..65535
7: Multi-NRT
RAB, HSPA is
Involved and EDCH is Used in
UL
0..65535
8: Multi Rab
Including CS
and PS
0xff: Not Related
to Service Type
0:
RT RAB
0..65535
Including Voice
1: RT RAB
Excluding Voice
2: Single NRT
on
DL DCH/UL
0..65535
DCH
3: Single NRT
4: Single NRT
0..65535
5: All Multi-NRT
RAB on DL
DCH/UL DCH
6: Multi-NRT
RAB, HSPA is
Involved and
only DCHs are
Used
in UL
0..65535
7: Multi-NRT
RAB, HSPA is
Involved and EDCH is Used in
UL
0..7
8: Multi Rab
Including CS
and PS
0xff:
Related
(4[0],Not
8[1],
12[2],
to
Service
Type
16[3], 20[4],
30[5], 40[6],
Infinity[7])dB
CInterDefault
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
N/A
CInterDefault
PrdMeasEcNo of Inter,
PrdMeasRSCP of Inter,
N/A
EvtMeasEcNo of Inter,
EvtMeasRSCP of Inter
N/A
CInterDefault
N/A
N/A
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
InterMeasCfgNo of
Inter,
InterMeasCfgNote of
Cinter
N/A
N/A
N/A
CInterDefault
N/A
N/A
CInterDefault
N/A
CInterDefault
N/A
CInterDefault
N/A
CIntraDefault
N/A
N/A
N/A
CIntraDefault
N/A
N/A
N/A
MbmsSuptInd of
utranCell
N/A
dB
4 dB.
MbmsSuptInd of
utranCell
N/A
N/A
N/A
N/A
0..65535
0:
RT RAB
0..65535
Including Voice
1: RT RAB
Excluding Voice
2: Single NRT
on
DL DCH/UL
0..65535
DCH
3: Single NRT
4: Single NRT
0..65535
5: All Multi-NRT
RAB on DL
DCH/UL DCH
6: Multi-NRT
RAB, HSPA is
Involved and
only DCHs are
Used
in UL
0..65535
7: Multi-NRT
RAB, HSPA is
Involved
OMCR: (-and EDCH
is Used
10..10)dB
stepin
UL
0.5
8: Multi Rab
RNC:
Including CS
D=(P+10)*2,
and PS
0..40
OMCR:
0xff: Not(-4..Related
2)dBm
to Service Type
Step2dBm
RNC: D=(P+4)/2
0..1
0: False
1: True
N/A
N/A
N/A
CRATDefault
CRATDefault
InterRatCfgNo of Rat,
InterRatCfgNote of Rat,
N/A
TrfCategory of CInter
N/A
N/A
N/A
CRATDefault
N/A
CRATDefault
N/A
N/A
N/A
CRATDefault
N/A
N/A
dB
0dB
N/A
N/A
Only valid when
DtQrxLvMnSib11Pr is
'True'.
Actual value of
Qrxlevmin =
QrxLevMinSib11 +
DtQrxLvMnSib11
When
QrxLevMinSib11 is
less than -115dBm,
DtQrxLvMnSib11Pr
must be set to 'False'.
dB
-2dB
DtQrxLvMnSib11Pr of
externalGsmCell
N/A
DtQrxLvMnSib11 of
externalGsmCell
-2dB
DtQrxLvMnSib12Pr of
externalGsmCell
N/A
DtQrxLvMnSib12 of
externalGsmCell
When
QrxLevMinSib12 is
less than -115dBm,
DtQrxLvMnSib12Pr
OMCR: (-4..2)dBm
Step2dBm
dB
RNC: D=(P+4)/2
0..1
0: False
1: True
CRATDefault
N/A
N/A
(1.. 100)%, step

N/A
1
0.85
N/A
N/A
(1.. 100)%, step

N/A
1
0.75
N/A
N/A
(1.. 100)%, step

N/A
1
0.85
N/A
N/A
(1.. 100)%, step

N/A
1
0.75
N/A
N/A
0..7
N/A
N/A
-115dBm
N/A
N/A
-115dBm
N/A
N/A
-2dB
QrxLevMinSib11Pr of
externalUtranCell
QrxLevMinSib11 of
externalUtranCell
-2dB
QrxLevMinSib12Pr of
externalUtranCell
QrxLevMinSib12 of
externalUtranCell
N/A
OMCR: (-115..25)dB step 2 dB

RNC:
dBm
D=(P+115)/2
0..45
OMCR: (-115..25)dBm step 2
dBm
RNC:
dBm
D=(P+115)/2
0..45
OMCR: (-4..2)dBm
Step2dBm
dB
RNC: D=(P+4)/2
0..1
0: False
1: True
N/A
OMCR: (-4..2)dBm
Step2dBm
dB
RNC: D=(P+4)/2
0..1
0: False
1: True
N/A
Only valid when

DtQrxLvMnSib11Pr is
'True', and Qrxlevmin
= QrxLevMinSib11 +
DtQrxLvMnSib11
When
QrxLevMinSib11 is
less than -115dBm,
DtQrxLvMnSib11Pr
must
be set
to 'False'.
Only valid
when
DtQrxLvMnSib12Pr is
'True'.
Actual value of
Qrxlevmin =
QrxLevMinSib12+
DeltaQrxlevmin
When
QrxLevMinSib12 is
less than -115dBm,
DtQrxLvMnSib12Pr
0..7
N/A
N/A
N/A
OMCR: (24..0)dB
dB
-18dB
N/A
N/A
OMCR: (24..0)dB
dB
-18dB
N/A
N/A
dBm
-115dBm
N/A
N/A
dBm
-115dBm
N/A
N/A
N/A
Idle State +
Cell_DCH State+
N/A
Connected
State, NonCell_DCH
N/A
N/A
N/A
N/A
N/A
Not Used
UseOfHCS of
gsmRelation
Not Used
UseOfHCS of
gsmRelation
-90dBm
UseOfHCS of
gsmRelation
-90dBm
UseOfHCS of
gsmRelation
OMCR: (-115..25)dBmstep 2
dBm
0:
Idle State
RNC:
Only
D=(P+115)/2
1:
Cell_DCH
0..45
State
Only
OMCR:
(-115..2:
Connected
25)dBm
step 2
State,
dBm NonCell_DCH
RNC:
3:
Idle State +
D=(P+115)/2
Cell_DCH
State
0..45
4: Idle State +
Connected
State, NonCell_DCH
5: Cell_DCH
State +
Connected
State, Non0..2
Cell_DCH
6: Idle State +
Cell_DCH
State+ (Not
OMCR:
Connected
Used[0],
10[1],
State, 30[3],
Non20[2],
Cell_DCH
40[4], 50[5],
60[6] )s
OMCR: (Not
Used[0], 10[1],
20[2], 30[3],
40[4], 50[5],
60[6] )s
OMCR: (-110..37)dBm
dBm
RNC: D=P+110,
0..73
OMCR: (-110..37)dBm
RNC: D=P+110
0..73
dBm
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
OMCR: (50..50)dB
dB
0dB
N/A
N/A
OMCR: (50..50)dB
dB
0dB
N/A
N/A
3dB
PenaltyTimeSib11 of
gsmRelation
If PenaltyTimeSib11
is 'Not used', it is no
need to configure
TempOffset1Sib11.
OMCR: (3[0],
6[1], 9[2], 12[3],
dB
15[4], 18[5],
21[6], inf[7])dB
3dB
PenaltyTimeSib12 of
gsmRelation
If PenaltyTimeSib12
is 'Not used', it is no
need to configure
TempOffset1Sib12.
1: Not Used
2: Used
Not Used
N/A
N/A
N/A
SIB11
GsmStateMode of
gsmRelation
If GsmStateMode is
"1",
GSMSIB11ORSIB11
BIS is invalid.
N/A
Inter_Default
N/A
N/A
OMCR: (3[0],
6[1], 9[2], 12[3],
dB
15[4], 18[5],
21[6], inf[7])dB
0:
0: SIB11
UE Period
1:
SIB11bis
Report
Parameters for
CPICH Ec/No
3: UE Inter(0,
1, 2, 3, Event
4, 5,
frequency
6,
7,
8,
9,
11,
Report
13,
15, 17, 19)
Parameters
for
CPICH Ec/No
4: UE Period
Report
(0, 0.5..14.5)dB
Parameters
step 0.5dB for
CPICH RSCP
7: UE Interfrequency Event
Report
Parameters
for
0..65535
CPICH RSCP
Report
Parameters for
CPICH
Ec/No(GSM)
Report
2a,
2b, 2c, 2d,
Parameters
for
2e, 2f
CPICH
RSCP(GSM)
Report
Parameters for
CPICH
Ec/No(EUTRAN
FDD)
N/A
MeasEvtNum Inter,
RptCrt of Inter,
ThreshUsedFreq[] of
Inter, Wused[] of Inter,
N/A
TrigTime[] of Inter,
ThreshNoUsedFreq[] of
Inter, WNoUsed[] of
Inter
InterMeasCfgNote of
N/A
Inter
dB
Inter_Default
N/A
Inter_Default
N/A
Inter_Default
InterMeasCfgNo of
Inter, MeasQuantity of
Inter, RptCrt of Inter
N/A
N/A
Inter_Default
RptCrt of Inter,
MeasEvtNum of Inter
N/A
1..MAX_INTER_
MEAS_EVENT
Where
N/A
MAX_INTER_M
EAS_EVENT
=6.
Inter_Default
RptCrt of Inter
N/A
0: CPICH Ec/No
N/A
1: CPICH RSCP
Inter_Default
InterMeasCfgNote of
N/A
N/A
Inter_Default
RptCrt of Inter,
PrdRptInterval of Inter
N/A
ms
Inter_Default
RptCrt of Inter,
PrdRptAmount of Inter
N/A
N/A
Inter_Default
1, 2, 4, 8, 16,
32, 64, Infinity
(250, 500, 1000,
2000, 3000,
4000, 6000,
8000, 12000,
16000, 20000,
24000, 28000,
2:
Inter32000,
frequency
64000)ms Event
Reporting
Criteria
3: Periodical
Reporting
CPICH
Criteria RSCP: (115..-25 )dBm
step 1dBm
CPICH Ec/No: (24..0) dB step
1dB
CPICH RSCP: (115..-25 )dBm
step 1dBm
1dB
(0, 10, 20, 40,
60, 80, 100,
120, 160, 200,
240, 320, 640,
1280, 2560,
5000)ms
(0.0..2.0 ) step
0.1
(0.0..2.0 ) step
0.1
0: Off
1: Interfrequency
Switch On
2: Inter-system
Switch On
3: Interfrequency and
Inter-system
Switch On
dBm
dBm
ms
N/A
N/A
N/A
InterMeasCfgNote of
MeasEvtNum Inter,
MeaEvtIdof Inter,
RptCrt of Inter,
MeasQuantity of Inter,
Inter_Default
ThreshUsedFreq[] of
MeasEvtNum
Inter, Wused[] Inter,
of Inter,
MeaEvtIdof
Hysteresis[] Inter,
of Inter,
RptCrt
of Inter,
TrigTime[]
of Inter,
MeasQuantityof
Inter,
WNoUsed[] of Inter
Wused[] of Inter,
Inter_Default
Hysteresis[] of Inter,
TrigTime[]
of Inter,
MeasEvtNum
Inter,
ThreshNoUsedFreq[]
of
RptCrt of Inter,
Inter,
WNoUsed[]
of
ThreshUsedFreq[] of
Inter Wused[] of Inter,
Inter,
Inter_Default
Hysteresis[] of Inter,
MeasEvtNum
Inter, of
ThreshNoUsedFreq[]
MeaEvtIdof
Inter, of
Inter, WNoUsed[]
RptCrt
Inter of Inter,
ThreshUsedFreq[] of
Inter_Default
Inter, Wused[] of Inter,
Hysteresis[]
ofInter,
Inter,
MeasEvtNum
TrigTime[]
Inter,
MeaEvtIdofofInter,
ThreshNoUsedFreq[]
of
RptCrt of Inter,
Inter
ThreshUsedFreq[] of
Inter_Default
Inter, Hysteresis[] of
Inter, TrigTime[] of Inter,
ThreshNoUsedFreq[] of
Inter, WNoUsed[] of
Inter
LoadBalance_Default
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: Off
1: On
LoadBalance_Default
N/A
N/A
N/A
RabAssLBSw;
LoadBalance_Default
RabAssSBSw
This parameter is
invalid when
RabAssLBSw or
RabAssSBSw is
Closed.
(0..100%) step
1%
When LdBalCdSwch
LoadBalance_Default
LdBalCdSwch of PlBal is off, DlCdThdCs is
invalid.
(0..100%) step
1%
When LdBalCdSwch
LoadBalance_Default
LdBalCdSwch of PlBal is off, DlCdThdR99Ps
is invalid.
0: Off
1: On
(1..100%) step
1%
0: Off
1: On
N/A
LoadBalance_Default
LdBalHsSwch
When LdBalHsSwch
is off,
DlLdBalHsWeight is
invalid.
N/A
LoadBalance_Default
N/A
N/A
(1..100%) step
1%
LoadBalance_Default
DlLdBalPwrSwch
When
DlLdBalPwrSwch is
off,
DlLdBalPwrWeight is
invalid.
(0..100) %
LoadBalance_Default
LdBalHsSwch of PlBal
When LdBalHsSwch
is Off, DlLdHsThdHsd
is invalid.
DlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
DlLdBalPwrSwch is
Off, DlPwrThdCsis
invalid.
DlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
DlLdBalPwrSwch is
Off, DlPwrThdCs4G
is invalid.
DlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
DlLdBalPwrSwch is
Off, DlPwrThdR99Ps
is invalid.
(0..100) %
(0..100) %
(0..100) %
When LdBalCdSwch
is Off,
LoadBalance_Default
LdBalCdSwch of PlBal
ExtraCDeltaCdTrd is
invalid.
LoadBalance_Default
When LdBalHsSwch
is Off,
ExtraCDeltaHsTrd is
invalid.
DlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
DlLdBalPwrSwch is
Off, ExtraCDeltaTrd
is invalid.
(0..100)%
UlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
UlLdBalPwrSwch is
Off, ExtraCDeltaTru
is invalid.
0: Off
1: Interfrequency
Switch On
N/A
LoadBalance_Default
N/A
N/A
0: Off
1: On
N/A
LoadBalance_Default
N/A
N/A
0: Off
1: On
N/A
LoadBalance_Default
N/A
N/A
LoadBalance_Default
LdBalCdSwch
When LdBalCdSwch
is "Off",
LdBalCdWeight is
invalid.
N/A
LoadBalance_Default
N/A
N/A
N/A
LoadBalance_Default
N/A
N/A
N/A
LoadBalance_Default
N/A
N/A
(0..100%) step
1%
(0..100%) step
1%
(0..100%) step
1%
(1..100%) step
1%
0: Off
1: On
0: Off
1: Interfrequency
Switch On
2: Inter-system
Switch On
3: Interfrequency and
Inter-system
0:
Off On
Switch
1: On
0: Off
1: On
HoldHspaPluBal
Sw[0] 0: Switch
Off HS-SCCH
Less
Balance
(1..100%)
step1:
Switch
On HS1%
SCCH Less
Balance
HoldHspaPluBal
Sw[1] 0: Switch
(0..100) %
Off
MIMO+HSDPA
DC+HSDPA
64QAM Balance
1: Switch On
MIMO+HSDPA
(0..100) %
DC+HSDPA
64QAM
Balance
RabHspaPluBal
HoldHspaPluBal
Sw[0] 0: Switch
Sw[2]
0: Switch
Off HS-SCCH
Off
Less
Balance
1:
(0..100)
%
MIMO+HSDPA
Switch On HSDC
Balance
SCCH
Less 1:
Switch
BalanceOn
MIMO+HSDPA
RabHspaPluBal
DC
Balance
Sw[1]
0: Switch
(-24..0)dB
HoldHspaPluBal
Off
Sw[3]
0: Switch
MIMO+HSDPA
Off
DC+HSDPA
MIMO+HSDPA
64QAM Balance
64QAM
1: SwitchBalance
On
1:
Switch On
(-115..-25)dBm
MIMO+HSDPA
MIMO+HSDPA
DC+HSDPA
64QAM
64QAM Balance
Balance
HoldHspaPluBal
RabHspaPluBal
Sw
[4]0:
0:Switch
Switch
Sw[2]
Off
HSDPA
Off
DC+HSDPA
MIMO+HSDPA
64QAM
Balance
DC Balance
1:
1:
Switch
Switch OnOn
HSDPA
MIMO+HSDPA
Enum
(HSDC+HSDPA
DC
Balance
SCCH
Less,
0..31
64QAM
64QAM
RabHspaPluBal
MIMO+HSDPA
Balance
Sw[3]
0: Switch
DC+HSDPA
HoldHspaPluBal
Off
64QAM,
Sw
[5] 0: Switch
MIMO+HSDPA
MIMO+HSDPA
Off
MIMO
64QAM Balance
DC,
Balance
1: Switch1:On
MIMO+HSDPA
Switch
On
MIMO+HSDPA
64QAM,
HSDPA
MIMO
Balance
64QAM
Balance
DC+HSDPA
HoldHspaPluBal
RabHspaPluBal
64QAM,
MIMO,
Sw
[6]0:
0:Switch
Switch
Sw[4]
HSDPA
DC,
Off
HSDPA
DC
Off HSDPA
HSDPA
64QAM,
Balance
1:
DC+HSDPA
HSUPA
16QAM)
Switch
64QAMOn
Balance
HSDPA
1: SwitchDC
On
Balance
HSDPA
HoldHspaPluBal
DC+HSDPA
Sw
[7] 0:64QAM
Switch
64QAM
Off
HSDPA
Balance
64QAM
Balance
RabHspaPluBal
1:
Switch
On
Sw[5] 0: Switch
HSDPA
64QAM
Off MIMO
Balance
Balance 1:
HoldHspaPluBal
Switch On
N/A
LoadBalance_Default
N/A
N/A
LoadBalance_Default
UlLdBalPwrSwch
When
UlLdBalPwrSwch is
off,
UlLdBalPwrWeight is
invalid.
UlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
UlLdBalPwrSwch is
Off, UlLdThdCs is
invalid.
UlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
UlLdBalPwrSwch is
Off, UlLdThdCs4G is
invalid.
UlLdBalPwrSwch of
LoadBalance_Default
PlBal
When
UlLdBalPwrSwch is
Off, UlLdThdR99Ps is
invalid.
dB
LoadBalance_Default
DcRedirectStaSw
dBm
LoadBalance_Default
DcRedirectStaSw
N/A
LoadBalance_Default
N/A
N/A
N/A
N/A
When
DcRedirectStaSw is
"Closed",
DULCARBALECNOT
HD is invalid.
When
DcRedirectStaSw is
"Closed",
DULCARBALRSCPT
HD is invalid.
N/A
when all values of
HOLDHSPAPLUBAL
SW,
HOLDHSPAPLUBALS
RABHSPAPLUBALS
W,
LoadBalance_Default
W,
RABHSPAPLUBALSW,
RRCDUALCARRSW
when all values of
RRCDUALCARRSW
are
"Off",
HOLDHSPAPLUBAL
HSPAPLUBALCAPP
SW,
HOLDHSPAPLUBALS RI is invalid.
RABHSPAPLUBALS
W,
LoadBalance_Default
W,
RABHSPAPLUBALSW,
RRCDUALCARRSW
RRCDUALCARRSW
are "Off",
HSPAPLUSCAPIND
is invalid.
LoadBalance_Default
N/A
N/A
0: Off
1: On
LoadBalance_Default
N/A
N/A
enum (6, 15, 25,

N/A
50, 75, 100)
N/A
N/A
(0, ..., 65535)

step 1
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..8)
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..7)
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..7)
N/A
N/A
N/A
N/A
DCS 1800 Band

N/A
Used
N/A
0: DCS 1800
Band Used;
1: PCS 1900
Band Used;
N/A
N/A
N/A
N/A
(0..16)
N/A
16
N/A
N/A
(-24.0)dB step
1dB
dB
-18
N/A
N/A
(-140..-44)dBm
step 2dBm
dBm
-116
N/A
N/A
(-119..-25)dBm
step 2dBm
dBm
-115
N/A
N/A
(-115..-25)dBm
step 2dBm
dBm
-115
N/A
N/A
(0..7)
N/A
N/A
N/A
(0..62)dB
step2dB
dB
10
N/A
N/A
(0..7)dB
step1dB
dB
N/A
N/A
0-1023
N/A
N/A
N/A
(0..62)dB
step2dB
dB
10
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..8)
N/A
N/A
N/A
(0..62) step 2dB dB
14
N/A
N/A
(0..7)
N/A
N/A
N/A
(0..16383)
N/A
N/A
N/A
3a, 3b, 3c, 3d
N/A
Rat_Default
N/A
N/A
1..MAX_RAT_M
EAS_EVENT T
N/A
Where
MAX_RAT_MEA
S_EVENT =4.
Rat_Default
N/A
N/A
0, 1, 2, 3, 4, 5,
6, 7, 8, 9, 11,
13, 15, 17, 19
N/A
Rat_Default
N/A
N/A
0, 1, 2, 3, 4, 5,
6, 7, 8, 9, 11,
13, 15, 17, 19
N/A
Rat_Default
N/A
N/A
0, 1, 2, 3, 4, 5,
6, 7, 8, 9, 11,
13, 15, 17, 19
N/A
Rat_Default
N/A
N/A
(0, 0.5..7.5)dB
step 0.5dB
dB
Rat_Default
EventNum Rat, EventId

Rat, RptCrt of Rat,
Thresh[] of Rat, W[] of N/A
Rat, ThreshSys[] of
Rat, TrigTime[] of Rat
0..65535
N/A
Rat_Default
InterRatCfgNote of Rat N/A
Parameters for
Own System
CPICH Ec/No
3: Period Report
Parameters for
Own System
CPICH RSCP
5: UE Event
Report
Parameters for N/A
Own System
CPICH RSCP
6: UE Event
Report
0: CPICH Ec/No
Parameters
for N/A
1: CPICH RSCP
Own System
CPICH
Ec/No(EUTRAN
)7: UE Event
Report
1,
2, 4, 8, 16,
Parameters
for N/A
32,
64, Infinity
Own
(250, System
500, 1000,
CPICH
2000, 3000,
RSCP(EUTRAN
4000, 6000,
)8000, 12000,
N/A
16000, 20000,
24000, 28000,
32000,
1: Inter-RAT
64000)ms
Event Reporting
Criteria
N/A
2: Periodical
Reporting
Criteria
step 1dB
N/A
1dB
step 1dB
N/A
1dB
(0, 10, 20, 40,
60, 80, 100,
120, 160, 200,
ms
240, 320, 640,
1280, 2560,
5000)ms
Rat_Default
OwnMeasQuantity of
Rat, RptCrt of Rat
Rat_Default
N/A
RptCrt of Rat
Rat_Default
RptCrt of Rat,
PrdRptInterval of Rat
N/A
Rat_Default
RptCrt of Rat,
PrdRptAmount of Rat
N/A
Rat_Default
OwnMeasQuantity of
N/A
Rat
Rat_Default
Rat_Default
Rat_Default

Rat, RptCrt of Rat,
OwnMeasQuantity Rat,
W[] of Rat, ThreshSys[]
of Rat, Hysteresis[] of
Rat,
TrigTime[]
Rat
EventNum
Rat,of
EventId
Rat, RptCrt of Rat,
OwnMeasQuantity Rat,
Thresh[] of Rat, W[] of
Rat, Hysteresis[] of Rat,
TrigTime[] of Rat
Rat, RptCrt of Rat,
Thresh[] of Rat, W[] of
Rat, ThreshSys[] of
Rat, Hysteresis[] of Rat
Rat, RptCrt of Rat,
Thresh[] of Rat,
ThreshSys[] of Rat,
Hysteresis[] of Rat,
TrigTime[] of Rat
N/A
N/A
N/A
N/A
(0.0..2.0) step
0.1
N/A
Rat_Default
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
N/A
On
N/A
N/A
N/A
On
N/A
N/A
N/A
0: Off
N/A
N/A
20s
N/A
N/A
N/A
0: Priority should
be
performed>shoul
N/A
d not be
performed>shall
not be performed
N/A
0: Off
1: On
0: Priority should
be
performed>shou
ld
0: not
Off be
performed>shall
1: On
not be
performed
1: Priority should
0: Off
be
1: On
performed>shall
not be
performed>shou
ld not be
performed
2:
Priority should
1..65535s
not be
performed>shou
ld be
performed>shall
not be
performed
3: Priority should
not be
performed>shall
not be
performed>shou
ld be performed
4: Priority shall
not be
performed>shou
ld be
performed>shou
0: should be
performed
1:
not be
0: should
Configure
performed
Inter-Frequency
2:
shall
not be
and
Inter-Rat
performed
compressed
mode
simultaneously
1: Configure
Inter-Frequency
and
Inter-Rat
0:
should
be
compressed
performed
mode
1: should not be
individually
performed
Bit0=0/1: Ignore
2:
shall not be
service
performed
0:
should be
handover
IE for
performed
AMR service /
1: should
not be
Apply
service
performedIE for
handover
2: shall
not be
AMR
service
performed
Bit1=0/1:
0:
should Ignore
be
service
performed
handover
IE for
1: should not
be
CS64
service
/
performed
Apply
service
2: shall not be
handover
performedIE for
CS64 service
Bit2=0/1: Ignore
service
handover IE for
PS RT service /
Apply service
handover IE for
PS RT service
0..20
Bit3=0/1:
Ignore
service
handover IE for
PS NRT service/
Apply service
0:
False for PS
handover
1:
True
NRT service
Bit4-Bit7
reserved, fixed
to 0
0: False
1: True
N/A
should not be
performed
N/A
N/A
N/A
Configure InterFrequency and

Inter-Rat
compressed
mode
simultaneously
N/A
N/A
N/A
should not be
performed
N/A
N/A
N/A
should not be
performed
N/A
N/A
N/A
should not be
performed
N/A
N/A
N/A
N/A
N/A
Bit0=1
Bit1=1
Bit2=1
Bit3=1
Bit4-Bit7=0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: SIB11
1: SIB12
N/A
SIB11
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
OMCR: (10..10)dB step

0.5
RNC:
D=(P+10)*2,
0..40
dB
0dB
N/A
N/A
N/A
On
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
0..7
N/A
N/A
N/A
Event Method
N/A
N/A
2A Event Trigger N/A
N/A
Ec/No
N/A
N/A
Event Method
N/A
N/A
RSCP
N/A
N/A
Bit0=1
Bit1=1
Bit2=1
Bit3-Bit7=0
RabAssSBSw,
CallHoldSBSw,
InitRrcSBSw
When all values of

RabAssSBSw,
CallHoldSBSw,
InitRrcSBSw are
"Closed",
PrefTrafType is
invalid.
3A
N/A
N/A
0: Off
1: On
0: Periodical
Method
N/A
1: Event Method
0: Algorithm
Deciding
1: 2A Event
Trigger
N/A
2: 2B Event
Trigger
3: 2C Event
Trigger
0: Ec/No
1: RSCP
N/A
2: Ec/No and
RSCP
0: Periodical
Method
N/A
1: Event Method
0: Ec/No
1:
RSCP CS No
Bit0=0/1:
2:
Ec/No and
N/A
Preferred/CS
RSCP
Preferred
Bit1=0/1: R99
PS No
Preferred/R99
PS Preferred
N/A
Bit2=0/1: HS PS
No Preferred/HS
0:
PSAlgorithm
preferred
Deciding
Bit3-Bit7:
1:
3A Eventfixed
Reversed,
N/A
Trigger
to 0
2: 3C Event
Trigger
N/A
N/A
N/A
N/A
0: Off
1: On
N/A
On
N/A
N/A
0: Periodical
Method
N/A
1: Event Method
Event Method
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
Not Used
N/A
N/A
0:
off Inter1: Turn
Not Used
N/A
frequency
2: Used and
Inter-RAT
Handover
1: Only Inter
Frequency
2: Only Inter
N/A
RAT
3: Inter
OMCR:
(- Is
Frequency
10..10)dB
step
Prior to Inter
0.5
RAT
dB
RNC:
D=(P+10)*2,
0..40
Inter Frequency Is N/A

Prior to Inter RAT
N/A
0dB
N/A
N/A
0..2
N/A
N/A
Not Used
UseOfHCS of
utranRelation
N/A
Not Used
UseOfHCS of
utranRelation
OMCR: (24..0)dB, step:

0.5 dB
dB
-10dB
UseOfHCS of
utranRelation
OMCR: (24..0)dB, step:

0.5dB
dB
-10dB
UseOfHCS of
utranRelation
OMCR: (-115..26)dBm
dBm
-90dBm
UseOfHCS of
utranRelation
OMCR: (-115..26)dBm
dBm
-90dBm
UseOfHCS of
utranRelation
OMCR: (50..50)dB
dB
0dB
N/A
N/A
0dB
N/A
N/A
dB
0dB
N/A
N/A
dB
0dB
N/A
N/A
OMCR: (Not
Used[0], 10[1],
20[2], 30[3],
40[4], 50[5],
60[6] )s
OMCR: (Not
Used[0], 10[1],
20[2], 30[3],
40[4], 50[5],
60[6] )s
OMCR: (-50..50)
dB
RNC: D=P+50, dB
0..100
OMCR: (50..50)dB
OMCR: (50..50)dB
RNC: D=P+50,
0..100
N/A
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
Only valid when

UseOfHCS is 'Used'.
0: Idle State
Only
1: Cell_DCH
State Only
2: Connected
State, Non0:
SIB11
Cell_DCH
1:
3: SIB11bis
Idle State +
Cell_DCH State
4: Idle State +
Connected
State, NonCell_DCH
5: Cell_DCH
State +
Connected
OMCR: (3[0],
State,9[2],
Non6[1],
12[3],
Cell_DCH
15[4], 18[5],
6:
Idle inf[7])dB
State +
21[6],
Cell_DCH
State+
OMCR:
(3[0],
Connected
6[1],
9[2],
12[3],
State, Non15[4],
18[5],
Cell_DCH
21[6], inf[7])dB
OMCR: (2[0],
3[1], 4[2], 6[3],
8[4], 10[5],
12[6], inf[7])dB
N/A
N/A
dB
dB
dB
Sib11orSib11bis is
invalid if StateMode
of utranRelation is
'Cell_DCH State
only';
Sib11orSib11bis is
StateMode of
invalid if SIB12Ind of
utranRelation;
utranCell is 'True' and
SIB11
SIB12Ind of
StateMode of
utranRelation
utranRelation is
'Connected State,
Non-Cell_DCH' or
'Cell_DCH State +
Idle State + Cell_DCH
N/A State+ Connected State,
N/A Non-Cell_DCH
Connected
State,
Non-Cell_DCH'.
3dB
PenaltyTimeSib11 of
utranRelation,
TempOffset2Sib11 of
utranRelation
3dB
PenaltyTimeSib12 of
utranRelation,
TempOffset2Sib12 of
utranRelation
2dB
PenaltyTimeSib11 of
utranRelation,
TempOffset1Sib11 of
utranRelation
If PenaltyTimeSib11
is 'not used', it is no
need to configure
'TempOffset1Sib11'an
d 'TempOffset2Sib11'
If PenaltyTimeSib12
need to configure
'TempOffset1Sib12'a
nd
'TempOffset2Sib12'
If PenaltyTimeSib11
need to configure
'TempOffset1Sib11'an
d 'TempOffset2Sib11'
If PenaltyTimeSib12
need to configure
'TempOffset1Sib12'a
nd
'TempOffset2Sib12'
OMCR: (2[0],
3[1], 4[2], 6[3],
8[4], 10[5],
12[6], inf[7])dB
dB
2dB
PenaltyTimeSib12 of
utranRelation,
TempOffset1Sib12 of
utranRelation
1: Not Used
2: Used
N/A
Not Used
N/A
N/A
0: Off
1: On
N/A
LoadBalance_Default
N/A
N/A
0: Off
1: On
N/A
LoadBalance_Default
N/A
N/A
LoadBalance_Default
When LdBalHsSwch
is Off,
ExtraDeltaHsuTrd is
invalid.
LoadBalance_Default
LdBalHsSwch
When LdBalHsSwch
is Off,
UlLdBalHsuWeight is
invalid.
(0..100%) step
1%
(1..100%) step
1%
(0..100%) step
1%
LoadBalance_Default
When LdBalHsSwch
is Off, UlLdHsThdHsu
is invalid.
0.. 256
N/A
LoadBalance_Default
N/A
N/A
0.. 256
N/A
LoadBalance_Default
N/A
N/A
0..
256 Ignore
Bit0=0/1:
service
handover IE for
AMR service /
Apply service
1..32
handover
IE for
AMR service
Bit1=0/1: Ignore
service
handover IE for
CS64
0.1-10service
step 0.1/
Apply service
handover IE for
CS64 service
Bit2=0/1: Ignore
service
handover IE for
PS RT service /
0:
should
be
Apply
service
performed
handover IE for
1:
not be
PSshould
RT service
performed
Bit3=0/1: Ignore
2:
shall not be
service
performed
handover
IE for
0:
should be
PS NRT service/
performed
Apply
service
1:
should
not be
handover for PS
performed
NRT
service
2: shall
not be
Bit4-Bit7
performed
0: should be
reserved,
performedfixed
to
0
1: should
not be
performed
2: shall not be
performed
0: should be
performed
1: should not be
performed
2: shall not be
performed
N/A
LoadBalance_Default
N/A
N/A
N/A
LoadBalance_Default
N/A
N/A
N/A
[1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1]
N/A
N/A
N/A
N/A
N/A
1: should not be
N/A
performed
N/A
N/A
1: should not be
N/A
performed
N/A
N/A
1: should not be
N/A
performed
N/A
N/A
1: should not be
N/A
performed
N/A
N/A
Bit0=1
Bit1=1
Bit2=1
Bit3=1
Bit4-Bit7=0
0: Off
1: On
N/A
0: Off
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: GSM/GERAN
N/A
prefer
N/A
(-24... 0)dB step

dB
by 1dB
-13
N/A
N/A
(-115...-25)dBm
dBm
step by 1dBm
-108
N/A
N/A
0: GSM/GERAN
prefer
1: EUTRAN
N/A
prefer
0: False
1: True
N/A
0: False
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
(0.. 62)dB, step

0.1
dB
RtwpLoadHighThd>
RtwpLoadMidThd>
RtwpLoadLowThd
N/A
(0.. 62)dB, step

0.1
dB
RtwpLoadHighThd>
RtwpLoadMidThd>
RtwpLoadLowThd
N/A
(0.. 62)dB, step

0.1
dB
10
RtwpLoadHighThd>
RtwpLoadMidThd>
RtwpLoadLowThd
N/A
(0..100)%
N/A
40%
TCPLoadHighThd>
TCPLoadMidThd>
TCPLoadLowThd
N/A
(0..100)%
N/A
70%
TCPLoadHighThd>
TCPLoadMidThd>
TCPLoadLowThd
N/A
(0..100)%
N/A
90%
TCPLoadHighThd>
TCPLoadMidThd>
TCPLoadLowThd
N/A
(0...128)
N/A
64
CodeLoadMidThd>
CodeLoadLowThd
N/A
(0...128)
N/A
96
CodeLoadMidThd>
CodeLoadLowThd
N/A
(0..100)%
N/A
40%
CELoadMidThd>
CELoadLowThd
N/A
(0..100)%
N/A
70%
CELoadMidThd>
CELoadLowThd
N/A
(0..65535)
N/A
26
DPAUNumMidThd>
DPAUNumLowThd
N/A
(0..65535)
N/A
50
DPAUNumMidThd>
DPAUNumLowThd
N/A
(0..65535)
N/A
26
UPAUNumMidThd>
UPAUNumLowThd
N/A
(0..65535)
N/A
50
UPAUNumMidThd>
UPAUNumLowThd
N/A
(0..65535)
N/A
32
MBMSUNumMidThd>
MBMSUNumLowThd
N/A
(0..65535)
N/A
60
MBMSUNumMidThd>
MBMSUNumLowThd
N/A
(0..65535)
N/A
80
SigUNumMidThd>
SigUNumLowThd
N/A
(0..65535)
N/A
150
SigUNumMidThd>
SigUNumLowThd
N/A
N/A
N/A
N/A
km
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0: Outdoor
Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3:
0: Subway/
[0-5]km
tunnel
Scene
1: [5-10]km
2: [10-40]km
3: [40-140]km
4: [140-200]km
5:
0: [200Outdoor
Infinity]km
Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3:
0: Subway/
Outdoor
tunnel
Scene Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3: Subway/
tunnel Scene
0: Outdoor
Scene
1: High-Mobility
Outdoor Scene N/A
2: Indoor Scene
3: Subway/
tunnel Scene
N/A
N/A
(0..65535)
N/A
N/A
N/A
(0..65535)
N/A
DlEARFCN
When it is EUTRAN
TDD, UlEARFCN has
the same value as
DlEARFCN.
(6, 15, 25, 50,

75, 100)
block
N/A
N/A
N/A
0: Off
N/A
N/A
0: Off
1: On
N/A
0: Off
RabMeaBalStaSwch
When
RabMeaBalStaSwch
is "on",
CoverMeaBalSwch is
valid
N/A
16
N/A
N/A
N/A
N/A
(-24... 0) step 1
dB
-13
N/A
N/A
(-120...-25)step
1
dBm
-108
N/A
N/A
(0..31)dB
step1dB
dB
6dB
N/A
N/A
0: Off
1: On
0..255 Step 1
1..255 Step 1
(0..31) step 1dB dB
10dB
N/A
N/A
(0..31) step 1dB dB
10dB
N/A
N/A
(-34.-3) step
1dB
dB
-18dB
N/A
N/A
N/A
0: False
N/A
N/A
Kcs of CnInfo
Kps of CnInfo
N/A
DivPc
SrvType of SubSrv
SrvType in DivPc
DrbcScene
ETtiEaThd is invalid
when EttiTraffVolSwch
is 'Off'.
N/A
N/A
0: False
1: True
0..250
Where 0..9 are
7..10
N/A
used for
signalling
service; 10...250
are used for
single service.
Odd number is N/A
configured for
downlink
service; even
number is
configured
for
1..255
N/A
uplink service.
1..255
N/A
DrbcScene
ETtiEbThd is invalid
when EttiTraffVolSwch
is 'Off'.
0: Off
1: On
N/A
Off
ETtiEaThd, ETtiEbThd N/A
0: Off
1: On
N/A
Off
N/A
N/A
0: RV0
1: RV Table
N/A
1: RV Table
N/A
N/A
0: Off
1: On
N/A
Off
N/A
N/A
(16, 32, 64, 128,

kbps
256, 384)kbps
64kbps
N/A
N/A
0: Off
1: On
N/A
Off
DtxDrxSwch of Hspa
N/A
0: Off
1: On
N/A
Off
HsscLessSwch is On
N/A
0: Off
1: On
N/A
Off
DtxDrxSwch
N/A
0: Off
1: On
N/A
LdCtrl
QosNegRenegSwi of
rncFunction
Valid only when QoS

renegotiation is "On",
which should be
guaranteed by the
restriction checking
from Network
administration.
1..50
N/A
LdCtrl
DecGbrSw
Valid only when

DecGbrSw is "On".
0: Off
1: On
N/A
On
N/A
N/A
64
N/A
N/A
1000
N/A
N/A
N/A
Cid of Utrancell
N/A
(16[0], 32[1],
(250[0],
500[1],
64[2], 128[3],
kbps
750[2],
256[4], 1000[3],
348[5])
1250[4],
kbps
1500[5],
1750[6],
2000[7],
3000[8],
ms
4000[9],
6000[10],
8000[11],
10000[12],
12000[13],
0..65534
N/A
16000[14]) ms
100..131, 0xff
N/A
Sccpch_Default
(18, 36, 72, 144) N/A
Sccpch_Default
PICH power and the

number of paging
indicators per PICH
frame have the
N/A
following relationship:
Np
PichPwr
18
-7
N/A
N/A
36
-7
0: Not
Supported
1: Supported
0: Not
Supported
1: Supported
N/A
0: Not Supported 72
N/A
-5
N/A
144
-2
N/A
N/A
(0, 1, 2, 4, 8, 16,
32, 64, 128,
N/A
256, 512,
Infinity)
subframe
Non-realtime: 32
subframe
N/A
Realtime: 4
subframe
N/A
(1, 2, 5)
subframe
subframe
Non-realtime: 2
subframe
Realtime: 2
subframe
DtxDrxConfigIdx,
DtxDDtxCyc1Tti10,
DtxCyc1Tti2
N/A
subframe
Non-realtime: 5
subframe
Realtime: 2
subframe
DtxDrxConfigIdx,
DtxCyc2Tti10,
DtxCyc2Tti2
N/A
(1, 2, 5)
subframe
(0, 1, 2, 4, 8, 16,
32, 64, 128,
subframe
256,
512)subframe
Non-realtime: 16
subframe
N/A
Realtime: 2
subframe
N/A
(4, 5, 8, 10, 16,

20) subframe
subframe
Non-realtime: 5
subframe
Realtime: 5
subframe
DtxDrxConfigIdx,
DtxCyc1Tti2,
DtxCyc1Tti10
N/A
0: False
1: True
N/A
Non-realtime:
True
Realtime: False
N/A
N/A
subframe
Non-realtime: 5
subframe
Realtime: 5
subframe
DtxDrxConfigIdx,
DtxCyc2Tti10,
DpcchBurst1,
MacDtxCycTti10,
DrxCycle
N/A
(1, 5, 10, 20)

subframe
(1, 4, 5, 8, 10,
16, 20)
subframe
(1, 2, 4, 8, 16,
32, 64, 128,
256) TTIs
(1, 2, 4, 8, 16,
32, 64, 128,
256) TTIs
(5, 10, 20, 40,

80, 160)
subframe
subframe
Non-realtime: 5
subframe
Realtime: 5
subframe
DtxDrxConfigIdx,
DtxCyc2Tti2,
DpcchBurst1,
MacDtxCycTti2,
DrxCycle
N/A
TTI
Non-realtime: 32
TTIs
DtxDrxConfigIdx,
Realtime: 32
DtxLongPreLegth
TTIs
N/A
TTI
Non-realtime: 32
TTIs
DtxDrxConfigIdx,
Realtime: 32
DtxLongPreLegth
TTIs
N/A
subframe
(4, 5, 8, 10, 16,

20, 32, 40, 64,
subframe
80, 128, 160)
subframe
1..
MAX_NUM_DT
XDRX_CONFIG
_INDEX
N/A
Where
MAX_NUM_DT
XDRX_CONFIG
_INDEX =50.
(2, 4, 15) slots
slot
(0, 1, 2, 4, 8, 16,
32, 64, 128, 256 TTI
) TTIs
Non-realtime: 80
subframe
DtxDrxConfigIdx,
Realtime: 5
DtxCyc1Tti10,
subframe
DpcchBurst2
N/A
Non-realtime: 80
DtxDrxConfigIdx,
subframe
DtxCyc1Tti2, CqiCycle, N/A
Realtime: 5
DpcchBurst2
subframe
Non-realtime: 1
Realtime: 2
DtxDrxConfigIdx of
SrvPhy
N/A
Non-realtime: 15 DtxDrxConfigIdx,
TTIs
DtxCyc2InactTrd2,
Realtime: 4 TTIs DtxCyc2InactTrd10
N/A
Non-realtime: 16
TTIs
N/A
Realtime: 2 TTIs
N/A
subframe
Non-realtime: 10
subframe
DtxDrxConfigIdx,
Realtime: 5
DtxCyc1Tti10
subframe
N/A
(1, 4, 5, 8, 10,
16, 20)
subframe
subframe
Non-realtime: 5
subframe
Realtime: 5
subframe
N/A
(1, 2, 4, 8, 16,
32, 64, 128,
256, 512,
Infinity) TTIs
TTI
Non-realtime: 32
TTIs
N/A
Realtime: 2 TTIs
(5, 10, 20)

subframe
DtxDrxConfigIdx,
DtxCyc1Tti2
N/A
1-65535kbps
kbps
64kbps
MaxBitRate of SubSrv
Direction of SubSrv
3..9
0: Switch Off
QoS
Negotiation,
Switch Off QoS
Renegotiation
1/17/2012
1: Switch Off
QoS
Negotiation,
Switch On QoS
Renegotiation
2: Switch On
QoS
Negotiation,
Switch Off QoS
Renegotiation
3:
Switch On
1-65535kbps
QoS
Negotiation,
Switch On QoS
Renegotiation
0: Carrying PCH
1:
Carrying R99
4..35
FACH, not
Supporting CBS
2: Carrying R99
FACH,
Supporting
CBS
(0..149*256)chip
3:
Carrying
R99
step
256chip
FACH&PCH, not
Supporting CBS
4: Carrying R99
FACH&PCH,
Supporting CBS
5: Carrying
MCCH
FACH&R99
0:
SIB5not
FACH,
1:
SIB6
Supporting
CBS
2:
and
6: SIB5
Carrying
SIB6
MCCH
FACH&R99
FACH,
Supporting
0:
Inactive CBS
7: Active
Carrying
1:
MCCH FACH
N/A
N/A
N/A
N/A
N/A
0: Switch Off
QoS Negotiation,
N/A
Switch Off QoS
Renegotiation
kbps
64kbps
N/A
N/A
Sccpch_Default
N/A
Valid only when QoS

negotiation or
renegotiation is "On".
It's value must be
among the rates of
dlink services, which
by the restriction
checking from
Network
administration.
N/A
Valid only when QoS
negotiation or
It's value must be
among the rates of
by the restriction
checking from
Network
administration.
N/A
Valid only when QoS
negotiation or
It's value must be
among the rates of
by the restriction
checking from
Network
administration.
N/A
chip
Sccpch_Default
N/A
N/A
N/A
Sccpch_Default
Sib5OrSib6 of Sccpch
N/A
N/A
Sccpch_Default
SccpchUsage of
Sccpch
N/A
N/A
Inactive
SchTstdInd,
PcpichTxDivInd,
PccpchSttdInd
N/A
N/A
SrvType&TrafficClass&MaxBitRate
SrvType, MbmsInd
0: Uplink
1: Downlink
N/A
0: CS Domain
1:
PS Domain
0..65534
Where 0..9,
65000-65534are
used
for 000,
(10..256,
signalling
000) bps step
service;
10 bps
10..64999 are
used for single
0:
PTP MBMS
service.
Odd
Service
number or
is NonMBMS
Service
configured
for
1:
PTM
downlinkMBMS
Service even
service;
number is
configured for
uplink service.
Detailed service
types refers to
0:
"SrvType&Traffic
Conversational
Class&MaxBitR
1: Streaming
ate"
sheet.
2: Interactive
Only
the
3: Background
services
in the
4: Unknown
"SrvType&Traffic
Conversational
Class&MaxBitR
0: Not
ate" sheet are
Supported
supported
in
1:
Supported
current version,
and can not be
added
0: Not or
deleted.
Supported
1: Supported
DL
27.2k\3.4k\13.6k
Signaling(no
meaning for
signaling), UL/DL
AMR6.60k23.85k , UL/DL
NAMR4.75kN/A
12.2k, CS 28.8k,
CS 64k, CS 32k,
CS 14.4k, CS
57.6k are in CS
domain
others
MinBitRate
are in PS
domain.
N/A
N/A
Default value for

PTM MBMS
service is 1, for SrvType
other service
type is 0.
N/A
N/A
N/A
N/A
N/A
MbmsInd
N/A
N/A
N/A
N/A
1: Supported
N/A
N/A
SccpchCPCId of
Sccpch
SccpchUsage of
Sccpch
N/A
N/A
bps
N/A
4..35
N/A
Sccpch_Default
(10..16, 000,
000) bps step
10 bps
bps
MaxBitRate
DL 1.5kbps sub-service used by F-DPCH: 1500bpsUL/DL
N/A
27.2k Signaling: 27200bpsUL
SrvType
(2, 10)ms
ms
10ms
0:
CCCH(CCCH)
1:
N/A
DCCH(DCCH)
2: DTCH(DTCH)
N/A
[0(CCCH), 1(DCCH),
N/A2(DTCH)]
N/A
N/A
0..6
N/A
[6, 6, 6]
N/A
N/A
0..6
N/A
[6, 6, 6]
N/A
N/A
0..15
N/A
[3, 3, 3]
N/A
N/A
0..15
N/A
[3, 3, 3]
N/A
N/A
(2..1505) Byte
Byte
[124, 124, 600]
N/A
N/A
(2..1505) Byte
Byte
[21, 21, 45]
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
0: 2SF4( 2SF4)
N/A
N/A
64
MaxBitRateCEdch
N/A
1..
MAX_NUM_DT
XDRX_CONFIG
_INDEX
N/A
Where
MAX_NUM_DT
XDRX_CONFIG
_INDEX =50.
DtxDrxConfigIdx of
Non-realtime: 1Realtime: 2
DtxDrx
N/A
65..96
65
N/A
0: 2SF4( 2SF4)
1: 2SF2( 2SF2)
2:
N/A
2SF2+2SF4(2S
F2+2SF4)
0..8000 kbps
kbps
N/A
N/A
0: 2 SCCPCHs
are Configured,
not Supporting
MBMS, not
Supporting CBS
1: 2 SCCPCHs
are Configured,
0:
10ms
notRACH
Supporting
TTI
MBMS,
1: RACH 20ms
Supporting
CBS
TTI1 SCCPCH is
2:
Configured, not
Supporting
MBMS, not
0:
Not Support
Supporting
CBS
1:
3: Support
1 SCCPCH is
Configured, not
Supporting
MBMS,
Supporting CBS
4: 2 SCCPCHs
are Configured,
0-255,
255
Supporting
means
MBMS,resource
not
release
is not
Supporting
CBS
limited
by UE
5: 2 SCCPCHs
number
when
are Configured,
band
limitation
Supporting
is
exceeded.
MBMS,
Supporting CBS
6:
3 SCCPCHs
0..65535
are Configured,
Supporting
MBMS, not
Supporting CBS
7:
3 SCCPCHs
1..100
are Configured,
Supporting
MBMS,
Supporting CBS
0: False
1: True
N/A
ConstVal
N/A
N/A
0: Not Support
N/A
N/A
N/A
0: 2 SCCPCHs arembmsSuptInd
Configured, not Supporting
If MbmsSuptInd
MBMS, not Supporting
of vsD
CBS
N/A
N/A
N/A
N/A
UeTrvMCfgNo
Measobj
N/A
50
N/A
N/A
N/A
N/A
N/A
0: False
1: True
N/A
0: False
N/A
N/A
0..65535
N/A
N/A
N/A
N/A
0-4095
N/A
N/A
N/A
N/A
Link1BrsType
Mutil valid signature

link can't be
configured be same
in a ANI .
0..65535
N/A
N/A
0..65535
0..65535
0: ATM Bear
1: IP Bear
0xFF: Invalid
Link
0: ATM Bear
1: IP Bear
0xFF: Invalid
Link
0: ATM Bear
1: IP Bear
0xFF: Invalid
Link
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Link2BrsType

link can't be
configured be same
in a ANI .
Link3BrsType

link can't be
configured be same
in a ANI .
LinkId1

link can't be
configured be same
in a ANI .
LinkId2

link can't be
configured be same
in a ANI .
N/A
N/A
LinkId3

link can't be
configured be same
in a ANI .
USET_CTRLPO
RT(3: NCP)
N/A
USET_COMPO
RT(4: CCP)
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
R_SCTPAC>OUTStreams
N/A
0: EUTRAN FDD N/A
N/A
If R_SCTPAC>OUTStreams equals
0, then OutSteamId
must be configured
as 0. If R_SCTPAC>OUTStreams more
than 2 , then
OutSteamId must be
configured in [1(R_SCTPAC>OUTStreams
- 1)]
N/A
0..999
N/A
N/A
N/A
0..999
N/A
N/A
N/A
0: EUTRAN
FDD
1: EUTRAN
TDD
0: None
1: Use IMSI
2: Use IDNNS
N/A
N/A
N/A
0..1
N/A
N/A
N/A
0..9
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0: Off
1: On
N/A
N/A
N/A
0..65535
N/A
65535
N/A
N/A
0..65535
N/A
65535
N/A
N/A
0..65535
N/A
65535
N/A
N/A
0..65535
N/A
65535
N/A
N/A
0..65535
N/A
65535
N/A
N/A
0: No Support
1: Support
N/A
0: No Support
N/A
N/A
Service/Support
16k MBMS
Service
Bit2=0/1: Not
Support 32k
MBMS
Service/Support
32k MBMS
Service
Bit3=0/1: Not
Support 64k
MBMS
Service/Support
0:
RTT
64k
MBMS
Preferred
Service
1:
AGPS Not
Bit4=0/1:
Preferred
Support 128k
MBMS
Service/Support
0: RTT
128k MBMS
Preferred
Service
1:
AGPS
Bit5=0/1: Not
Preferred
Support 256k
MBMS
Service)/Support
1..500MBMS
256k
Service)
N/A
N/A
N/A
N/A
0: RTT Preferred N/A
N/A
N/A
1: AGPS
Preferred
N/A
N/A
100ms
100
N/A
N/A
(-50, ...50)dB
step 0.1dB
dB
0dB
N/A
N/A
0-65534
N/A
WhiteTrfPc
SrvType of SubSrv
SrvType in TrfPc
WhiteTrfPc
SrvType of WhiteTrfPc

services.
(0.1..0.5)dB step 0.1dB

dB
1. Only valid for

uplink services.
SrvType of WhiteTrfPc,
2. For uplink
MaxSirTargDnStep of
services:
WhiteTrfPc
UlSirTargDnStep<=
MaxSirTargDnStep
1. Only valid for
uplink services.
2. For uplink
UlSirTargDnStep of
services:
WhiteTrfPc
UlSirTargDnStep<=
MaxSirTargDnStep
(0.1..0.5)dB step 0.1dB

dB
WhiteTrfPc
(0.1..1)dB step 0.1dB

dB
WhiteTrfPc
0: Off
1: On
WhiteTrfPc
WhiteTrfPc
1. Only valid for

downlink and not
SrvType of WhiteTrfPc, MBMS services.
MinDlDpchPwr of
2. For downlink and
WhiteTrfPc
not MBMS services:
MaxDlDpchPwr>=
MinDlDpchPwr.
(-35..15 ) dB
step 0.1 dB
N/A
dB

services.
(-35..15) dB
step 0.1 dB
dB
WhiteTrfPc
1. Only valid for

downlink and not
SrvType of WhiteTrfPc, MBMS services.
MaxDlDpchPwr of
2. For downlink and
WhiteTrfPc
not MBMS services:
MaxDlDpchPwr>=
MinDlDpchPwr.
(-30..+30)dB
step 0.1dB
dB
WhiteTrfPc

services.
(-50..33)dBm
step 1
dBm
WhiteTrfPc

services.
WhiteTrfPc
ULMaxSIR of
WhiteTrfPc, ULMinSIR
of WhiteTrfPc
WhiteTrfPc
ULInitSIR of
WhiteTrfPc, ULMinSIR
of WhiteTrfPc
WhiteTrfPc
ULInitSIR of
WhiteTrfPc, ULMaxSIR
of WhiteTrfPc
BLERtarget ValueN/A
Range
WhiteTrfPc
N/A
N/A
1..50
TBs
WhiteTrfPc
N/A
N/A
(1..65535)TBs
TBs
WhiteTrfPc
N/A
N/A
(1..50)TBs
TBs
WhiteTrfPc
Only valid when

(1..65535)TBs
TB
WhiteTrfPc
Only valid when

(-8.2..17.3)dB
step 0.1 dB
(-8.2..17.3)dB
step 0.1 dB
(-8.2..17.3)dB
step 0.1 dB
dB
dB
dB
1. Only valid for

uplink services.
2. For uplink
services:
ULMaxSIR>ULInitSIR
>ULMinSIR.
1. Only valid for
uplink services.
2. For uplink
services:
ULMaxSIR>ULInitSIR
>ULMinSIR.
1. Only valid for
uplink services.
2. For uplink
services:
ULMaxSIR>ULInitSIR
>ULMinSIR.
3.98107170553
4974e-004
30
5.01187233627
2726e-004
31
6.30957344480
1930e-004
32
7.94328234724
2803e-004
33
1.00000000000
0000e-003
0..255
34
1.25892541179
4168e-003
35
1.58489319246
0..255
1114e-003
36
1.99526231496
8878e-003
37
2.51188643150
(0..15) step 0.01
9579e-003
38
3.16227766016
8379e-003
39
(0..15)
step 0.01
3.98107170553
4972e-003
40
5.01187233627
2724e-003
41
0..255
6.30957344480
1928e-003
42
7.94328234724
2816e-003
0..255
43
1.00000000000
0000e-002
44
1.25892541179
(0..15)
step 0.01
4168e-002
45
1.58489319246
1114e-002
46
(0..15) step 0.01
1.99526231496
8880e-002
47
2.51188643150
9580e-002
48
0..255
3.16227766016
8379e-002
49
3.98107170553
4974e-002
0..255
50
5.01187233627
2722e-002
51
6.30957344480
1933e-002
52
7.94328234724
2812e-002
53
1.00000000000
0000e-001
N/A
WhiteTrfPc
Only valid when

N/A
WhiteTrfPc

services.
N/A
WhiteTrfPc
NhrThrUpTti10[] of
WhiteTrfPc,
NhrThrDownTti10[] of
WhiteTrfPc
NhrThrUpTti10[] of
WhiteTrfPc,
NhrThrDownTti10[] of
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc
NhrThrUpTti2[] of
WhiteTrfPc,
NhrThrDownTti2[] of
WhiteTrfPc
NhrThrUpTti2[] of
WhiteTrfPc,
NhrThrDownTti2[] of
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc
N/A
WhiteTrfPc

services.
2.For
uplink
Only valid
forservices:
uplink
NhrThrDownTti10[0]<
services.
=
NhrThrDownTti10[1]<
=
NhrThrDownTti10[2]
services.
3.For
2.For uplink
uplink services:
services:
NhrThrDownTti10[0]
NhrThrUpTti10[0]<=
<= NhrThrUpTti10[0]
NhrThrUpTti10[1]<=
NhrThrUpTti10[2].
NhrThrDownTti10[1]
<=
NhrThrUpTti10[1]
NhrThrDownTti10[0]
For
uplink services:
<= NhrThrUpTti10[0]
NhrThrDownTti10[2]
<=
NhrThrUpTti10[2].
NhrThrDownTti10[1]
<= NhrThrUpTti10[1]
Only
valid for
uplink
For uplink
services:
services.
NhrThrDownTti10[2]
<= NhrThrUpTti10[2].
services.
2.For
uplink
Only valid
forservices:
uplink
NhrThrDownTti2[0]
services.
<=
NhrThrDownTti2[1]
<=
NhrThrDownTti2[2]
services.
3.For
2.For uplink
uplink services:
services:
NhrThrDownTti2[0]
NhrThrUpTti2[0] <=
<=
NhrThrUpTti2[0]
NhrThrUpTti2[1]
<=
For
uplink services:
NhrThrUpTti2[2]
NhrThrDownTti2[1]
<=
NhrThrUpTti2[1]
NhrThrDownTti2[0]
For
uplink services:
<= NhrThrUpTti2[0]
NhrThrDownTti2[2]
<=
NhrThrUpTti2[2].
NhrThrDownTti2[1]
<= NhrThrUpTti2[1]
Only
valid for
uplink
For uplink
services:
services.
NhrThrDownTti2[2]
<= NhrThrUpTti2[2].
services.
0: Off
1: On
N/A
WhiteTrfPc

services.
(0..100)% step
0.1%
N/A
WhiteTrfPc

services.
1...20
N/A
WhiteTrfPc

services.
0..6
N/A
WhiteTrfPc

services.
0..65535
30
N/A
N/A
0..65535
N/A
N/A
1..16
N/A
N/A
N/A
N/A
0..9
N/A
N/A
N/A
N/A
0: No
1: Yes
N/A
0: No
N/A
N/A
0-15
N/A
15
N/A
N/A
0-15
N/A
15
N/A
N/A
0-15
N/A
15
N/A
N/A
0-15
N/A
15
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
0: Off
1: On
N/A
1: On
N/A
N/A
N/A
N/A
N/A
0: Off
1: On
N/A
0: Off
N/A
N/A
0: off
1: On
N/A
0: Off
SrvType of TrfPc
N/A
6...300, step 6
second
18
N/A
N/A
0: Off
1: On
N/A
N/A
N/A
0...1dB, step 0.1 dB
0dB
N/A
N/A
0...65535, step 1 10ms
0ms
N/A
N/A
Triggered
by
Switch of CS
Receiving
Call Re- the
CELL
UPDATE
establishment
Message
Triggered from
by
UE
when SRNC
Receiving
the
is
in Stable
CELL
UPDATE
Status
Off/On
Message
from
Bit1=0/1:
UE when Switch
SRNC
of
PSHandover
Call Reis
in
(0.1..1)dB
step
establishment
Flow
Off/On
0.1dB
Triggered
Bit2 = 0/1:by
Receiving
the
Switch of CS
CELL
UPDATE
Call ReMessage
from
establishment
(0.1..1)dB
step
UE
when SRNC
Triggered
by
0.1dB
is
in Handover
Receiving
the
Flow
CELLOff/On
UPDATE
Bit2=0/1:
Message Switch
from
of
CallSRNC
ReUEPS
when
establishment
is in RAB Setup
Triggered
by
Flow Off/On
Receiving
Bit3 = 0/1: the
CELL
SwitchUPDATE
of CS
Message
Call Re- from
UE
when SRNC
establishment
is
in RAB Setup
Triggered
by
Flow
RAN Off/On
Network
Bit3=0/1:
Switch
when SRNC
is
of
PS CallStatus
Rein Stable
establishment
Off/On
0:
Off= 0/1:by
Triggered
Bit4
1:
OnNetwork
RAN
Switch
of CS
when
SRNC is
Call Rein
Stable Status
establishment
Off/On
Triggered by
Bit4=0/1:
Switch
(0...30)dB,
step
RAN network
of
PS
Call
Re1dB
when SRNC is
establishment
in Handover
Triggered
by
Flow Off/On
RAN
Bit5 =network
0/1:
when
Switch
of CS is
0:
Off SRNC
in
Handover
Call
1:
OnReFlow
Off/On
establishment
Bit5=0/1:
TriggeredSwitch
by
of
PSnetwork
Call
ReRAN
0:
RB
Setup
establishment
when SRNC is
Method
Triggered
by
in RAB
1:
RB Setup
RAN
network
Flow Off/On
Reconfiguration
when SRNC is
Method
in
RAB Setup
Bit6-15
Flow
Off/Onfixed
Reserved,
0
0..255
Bit6-15
reserved, fixed 0
dB
dB
N/A
UL services and
signaling with the
maximum bit
SrvType of TrfPc,
rate no more
UlSirTargUpStep
than 384kbps:
0.6dB;
Others: 0.3dB
WhiteTrfPc
Bit0 = 1: On
Bit1 = 1: On
Bit2 = 1: On
Bit3 = 1: On
Bit4 = 1: On
Bit5
Bit0 =
= 1:
1: On
On
Bit1 = 1: On
Bit6-15
Bit2 = 1: On
Reserved,
Bit3 = 1: Onfixed
0 = 1: On
Bit4
Bit5 = 1: On
1. Only valid for

uplink services.
2. For uplink
services:
UlSirTargUpStep<=
MaxSirTargUpStep
1. Only valid for
uplink services.
SrvType of WhiteTrfPc, 2. For uplink
UlSirTargUpStep
services:
UlSirTargUpStep<=
MaxSirTargUpStep
N/A
N/A
N/A
N/A
N/A
Bit6-15
Reserved, fixed
0
1: On
N/A
N/A
dB
0dB
N/A
N/A
N/A
0: Off
N/A
N/A
N/A
1: RB
Reconfiguration
Method
N/A
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..255
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..65535
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
N/A
N/A
0..2^32-1
N/A
1-2000 kbps
kbps
(-24... 0)dB step

1dB
dB
(-120...-25)dBm
step 1
dBm
0: RNC Location
Mode
1: SAS Location BYTE
Mode
The default
value for event
[4a 4b] is as the
following
0
according to the
value of the
different
measurement
purpose:
10 (E-DCH UP
Throughput
Measurement
Configuration
Number for ETTI
-13 Switching):
[1500 700] kbps
Other
Configuration
Number: [- -]
-108
N/A
N/A
Only valid when
Measobj is 53(EDCH);
ThoughThres[] is an
Measobj of UeTrv,
array, the maximum
MeasEvtNum of UeTrv element number of
the array is 2.The
effective element
number of the array
is MeasEvtNum.
N/A
N/A
N/A
N/A
0: RNC Location N/A
N/A
N/A
N/A
0..16383
N/A
N/A
N/A
1..255
N/A
20
N/A
N/A
1..255
N/A
20
N/A
N/A
1..255
N/A
10
N/A
N/A
1..255
N/A
10
N/A
N/A
N/A
N/A
0: Off
1: On
N/A
N/A
N/A
100..65535
100ms
600
N/A
N/A
1..500
100 ms
100
N/A
N/A
1..500
100 ms
100
N/A
N/A
0: include CS
1: Any service
N/A
0: include CS
N/A
N/A
Type
NoegotiatioNo
With Cno
Function
Switch
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
Yes
Network
Planing&Optimi Yes
zation
N/A
configuredaccording to the
transmission delay from
SRNC to NodeB, including:
1: The value 20 is
The
protocolthe
parameter
configuredif
transmission
The
function
of the
parameter
TOAWS
is
configured
environment
is
about
is
to
control
the
lastest
according Earth
to theOrbit)
OMCR
LEO(Low
the
acceptable arrival
timeorof
a
parameters
ofdelay
TOAWS
and
transmission
is
not
FACH
DATA
FP about
ptm
jitter.
The
function
of
the
more
than
20ms
Configuration
and
MBMS
service
in .aRule
NodeB.
protocal
paramter
TOAWS
is
2:
The
value
100
is
Adjustment
Suggestion
The
protocol
parameter
parameter
is configured
to
control
the
earliest
configuredif
the
TOAWS
isto
configured
according
thetransmission
acceptable
arrival
time of a
environment
isjitter
about
according
to
the
OMCR
Transmission
FACH DATA FP
in
atolerance
NodeB.
MEO(Medium
Earth
Orbit)
parameters
of TOAWS
time
errors from
RNC
toand
a or
The
parameter
of
TOAWS
is
the
transmission
jitter.
The
function
of the
related
NodeB.
configured
according
to
the
delay
between
SRNC
and is
protocal
paramter
TOAWS
If
the value
of the
parameter
faculty
of
processing
FACH
NodeB
is
between
20ms
to
control
thethe
earliest
is
too
quality ofand
ptm
FPs
insmall,
a. RNC.
100ms
acceptable
arrival
time
of
a
MBMS
service
would
be
The
parameter
of jitter isis
3:
The
maximum
FACH
DATA
FP invalue
a NodeB.
dropped.
configured
according
to the
configuredif
the
transmission
The
parameter
of
jitter
is a
If
the
value
of
the
parameter
transport
delay
jitter
from
environment
is about
configured
according
to
the
is
too
large,
the
delay
of
ptm
RNC
to a related NodeB.
GEO(Geostationary
Earth
transport
delay
jitter
from
a
MBMS
service
would
be
If
the value
oftransmission
the parameter
Orbit)
orathe
RNC
to
related
NodeB
in
increased.
is
tooprotocol
small, the
quality
of ptm
The
parameter
delay
between
SRNC
and
The
function
of
the
parameter
which
the
external
The
parameter
can
not
be
MBMS
service
would
be
TOAWS
is
configured
NodeB
is
more
than
100ms
is
to controltoo
the
lastest
neighboring
cellsmall.
of the SRNC.
configured
dropped.
according
If
the
valuetoarrival
ofthe
theOMCR
parameter
acceptable
time of a
is
configured.
If
the
value
of
the
parameter
parameters
of
TOAWS
and
is
too
small,
the
maxium
bit
FACH
DATA
FP
in
a NodeB.
If
the
value
of
the
OMCR
is
tooof
large,
theisdelay
of ptm
jitter.
The
function
of
the
rate
a
service
may
be
not
The
parameter
configured
parameters
of TOAWS
MBMS
service
beandis
protocal
paramter
TOAWS
be
fulfilled,
the
HS-DSCH/Eaccording
to
thewould
jitter
is
too
small,
NodeB
can
increased.
to
control
the earliest
DCH
congestion
detection
Transmission
jitter
tolerance
not
response
a
Timing
The
protocol
parameter
acceptable
arrival
time
action
may from
be
triggered
time
errors
RNC
toofmore
aato
Adjustment
Control
Frame
TOAWS
is
configured
FACH
DATA
FP
in
a
NodeB.
easily
and
the
quality
of
related
RNC
in NodeB.
time
,adjusting
the probability
The
protocol
parameter
according
toof
the
The
parameter
of
TOAWS
service
with
HS-DSCH/EIf
the
value
the
parameter
that
some
DCH
data
to of is
TOAWS
is
configured
value
of
the
parameter
The
function
of
the
parameter
configured
toon
the
DCH
be
dropped.
is
too would
small,
NodeB
can
not
DRNS
cantoaccording
not
be
sent
uu
according
the
OMCR
jitter
because
the
RNC's
is
to control
the
lastest
faculty
of
processing
FACH
If
the
value
of
the
parameter
response
a
Timing
interface
would
be
increased
parameters
of
TOAWS
and
process
faculity
is time
more
acceptable
arrival
ofaato
FPs
inlarge,
aquality
RNC.
is toothe
theofbuffer
of
Adjustment
Control
Frame
and
service
with
jitter.
The
function
ofNodeB.
the
steady.
PCH
DATA
FP
in
a
The
parameter
of
jitter
is
SRNC
and
UE
may
be
RNC
in
time
,
the
probability
IUR
DCH
channel
would
be
protocal
paramter
TOAWS
The
is the
configured
configured
tocan
theis
applied
too according
high,
that
aparameter
FACH
DATA
FPHSdropped.
to
control
the
earliest
according
to
the
transport
delay
jitter
from a
DSCH/E-DCH
congestion
not
bevalue
sent
onthe
uu
interface
If
the
of
parameter
acceptable
arrival
time
of a
Transmission
jitter
tolerance
RNC
to
a
related
NodeB.
detection
action
may
be the
would
be
increased
and
is
tooerrors
large,
The
DRNS
FACH
DATAfrom
FP
in
a NodeB.
time
RNC
to
athe
If
the
value
of
the
parameter
triggered
less
easily
and
quality
of
service
with
FACH
NodeB
would
store
more
The
parameter
ofprobability
TOAWS
is
related
NodeB.
is
too
small,
the
qualityDATA
ofwould
service
with
HSchannel
be
dropped.
DCH
FPs
and
the
delay
configured
according
to
the
If
the
of
the
parameter
that
avalue
FACH
FP
may be
DSCH/E-DCH
would
be
If
the
value
ofDATA
the
of
service
with
IURparameter
DCH
faculty
of out
processing
FACH
is
too
small,
NodeB
can
not
received
of
the
arrival
dropped.
is
tooinlarge,
ThebeNodeB
channel
would
increased
FPs
a
RNC.
response
a
Timing
window
in aof
NodeB
would be
If
the value
the FACH
parameter
would
store
more
more.
The
parameter
of jitter
is ofto
Adjustment
Control
Frame
increased
and
the
quality
is
configured
falsely
in of
DATA
FPs
and
the
delay
The
protocol
parameter
configured
according
to
the
RNC
in with
time
, the probability
service
FACH
channel
respective
NodeB,
the action
service
with
FACH
channel
TOAWS
is
configured
transport
delay
jitter
from
a
that
PCH
data
canmore.
notwould
be
would
be
of a a
soft/hard
handover
would
bea dropped.
increased
according
to
adjusting
the
RNC
to
related
NodeB.
sent
on
uu interface
would
be
If
the
value
of
the
be
processed
falsely
and
The
parameter
canparameter
not
bethe
value
of the
parameter
of
If
the
value
of
the
parameter
increased
and
the
quality
of
is
too
large,
The
NodeB
quality
of
service
would
be
configured
too
small.
jitter
because
RNC's
The
ofthe
thechannel
parameter
is
toofunction
small,
NodeB
can not
service
with more
PCH
would
store
FACH
dropped.
process
faculity
is
more
is
to
get
configuration
ofwould
response
a
Timing
such
as
a
paging
type1
DATA
FPs
anddata
the delay
of
steady.
sending
IUPS
in
order
Adjustment
Control
Frame
to
be
dropped.
service
with
FACH
channel
from
CN
RNC
in
time
,
the
probability
If the value
of the parameter
would
be increased
more.
The
iscan
configured
that
PCH data
not be
is
tooaparameter
large,
The
NodeB
The
protocol
parameter
to
beon
consistent
with
CNDATA
sent
uu
interface
would
be
would
store
more
PCH
TOAWS
is configured
configuration
of
sending
IUPS
increased
and
the
quality
of
FPs
and
the
delay
of
service
according
to adjusting the
data
service
with
PCH channel
with
PCH
channel
suchof
as a
value
of
the
parameter
If
the
value
of
the type1
parameter
such
as
a
paging
paging
type1 would
be would
jitter
because
the
RNC's
is
up
to cn,more.
RNC will follow
be
dropped.
increased
process
faculityMCC
is IUPS
more
Main
function:
uniquely
CN's
indication
of
data
If
the
value
of the
parameter
The
parameter
can
not
be
steady.
identifiesthe
country
that
in
order
is too large,too
The
NodeB the
configured
small.
UE
users
(or
system)
belong
If
the
value
of
the
parameter
would store more PCH
DATA
to.
MCC
is
allocated
uniformly
is
notand
up the
to cn,
RNC
FPs
delay
of will
service
and
decide
to send
IUPS
data
with internationally.
PCH
channel
such
asina
Influence
factor:
the be
value
order
OMCR's
pagingbytype1
would
should
set more.
by the Newwork
configuration
increased
Planning&Optimization.
The protocol parameter
TOAWS is configured
according to adjusting the
value of the parameter of
jitter because the RNC's
process faculity is more
steady.
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Main function: MNC identifies

a specific PLMN inside one
country (decided by MCC).
Influence factor: the value
should
setofby
theparameter:
Newwork
Function
this
Unique physical Identify code
of Neighbour GSM Cell In
Rnc
Factors of consideration: It's
recommended that the
PhyGsmCid
contain the
LAC
Function: neighboring
GSM
and
logical
GSM
Cell
ID
cells' BCCH ARFCN.
Configuration Rule: This
parameter should be set
according to operator network
deployment.
Function: neighboring GSM
cells' BSIC.
Function:
neighboring GSM
deployment.
cells' absolute radio
frequency
Function:
neighboring GSM
deployment.
cells' BSC Identifier
deployment
Function: neighboring cell
identity
deployment.
Function: GERAN Cell
Indicator
deployment.
Function: LAC of the
neighboring cell
parameter
should beallowed
set
Function: maximum
according
to
operator
network
uplink transmit power in
the
deployment.
GSM cell
Configuration Rule: UE
capability
The parameter is configured
by UE transmit capability.
Adjustment
Suggestion:
Not
GSM
suggest
to
modify
this
cells' MCC.
parameter
Configuration
Rule: This
deployment.
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A

cells' MNC.
deployment.
cells' MNC BCD Length
deployment.
cells' NCC
parameter
be set
Function ofshould
this parameter:
according
to
operator
configure the PLMN ofnetwork
GSM
deployment.
Cell
Factors of consideration: This
parameter need to be
negotiated
GSM
Function ofwith
this the
parameter:
neighbour
cell,
and
configure the RAC of GSM
configurated
according to the
Cell
PLMN
of
the
neighbour GSM
Factors of consideration:
This
Cell
parameter
need
to be
Function of this parameter:
negotiated
with
the GSM
configure the
SANC
info of
neighbour
cell,
and
GSM Cell
configurated
according toThis
the
RAC
of
the
neighbour
GSM
Cell
negotiated
GSM
Function ofwith
this the
parameter:
neighbour
cell,
and
configure the SANC number
configurated
of GSM Cell according to the
SNAC
of the neighbour
Factorsinfo
of consideration:
This
GSM
Cell.
If
network
parameter need
to besharing
is not used,with
this the
parameter
negotiated
GSM
don't
need cell,
to configured
neighbour
and
Function
of this
parameter:
configurated
according
to the
Unique
physicalofIdentify
code
SNAC number
the
of
Neighbour
RNC
Cell
neighbour GSM Cell. If
Factors
consideration:
It's
network of
sharing
is not used,
recommended
that
this parameter is
setthe
as zero
Function
of contain
this parameter:
AdjPhyCId
the
configure
of umts
neighbourcell-id
RNC ID
and
neighbour
neighbour cell
logical UMTS Cell
Factors
of consideration: This
ID
negotiated with the UMTS
Function:
neighbourThis
cell, parameter
and
indicates
if the
neighboring
configurated
according
to the
cell
of DRNC
supports Closed
Cell-Id
of the neighbour
Loop
UMTSMode1.
Cell
Configuration Rule: It should
be
set according
to if the
Function:
This parameter
neighboring
cellneighboring
of DRNC
indicates if the
actually
supports
Closed
cell of DRNC
supports
CPC
Loop
Mode1.
DTX-DRX.
be set according to if the
neighboring cell of DRNC
actually supports CPC DTXDRX.
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Function: This parameter

indicates
if the
Function of
thisneighboring
parameter:
cell
of
DRNC
supports
HS- of
configure combine
method
SCCH
less.
DRNC Iur radio Link
Configuration
Rule: It should
the
be
set
according
to if the
consumed transmission
neighboring
of DRNC
resource
andcell
DRNC
combine
actually
supports
HS-SCCH
Function
of this parameter:
campatibilty.
less.
SRNC
indicate
the combine
When this
parametre
is set
method
of
DRNC
as combined, theIur radio
Link
transmission resource can be
Factors
of consideration:
this
saved , but
need the support
parametre
of DRNC. is influenced by
the
combine
capabilityisand
When
this parametre
set
campatibility
of DRNC.
as not combined,
the
When
it's set resource
as 'may', can
the
transmission
better
compatiablity
can
be
not be saved,
not need
Function:
Thisbut
parameter
acquired.
the
support
of
DRNC.
indicates if the neighboring
When
it's set as
'must' or
cell of DRNC
supports
'must not', The consumed
64QAM.
transmission
can be
Configurationresource
Rule: It should
controlled
by
SRNC,
but
be set according to if the need
the
support
of
DRNC
Function:
downlink
carrier
neighboring
cell
of DRNC
central
frequency
point
of the
actually supports 64QAM.
cell
parameter
should
be set
Function: The
parameter
accordingthe
to operator
network
indicates
E-DCH HARQ
deployment.
combining capability of the
neighboring cell of DRNC.
be set according to the actual
Function:
The parameter
HARQ combining
capability of
indicates
the E-DCH
the neighboring
cell ofSF
the
capability
DRNC. of the neighboring
cell of DRNC.
be
set according
to the actual
Function:
The parameter
E-DCH
SF
capability
of the
indicates whether E-DCH
neighboring
cell
of
the
DRNC.
2ms TTI is supported by
the
be set according to the actual
E-DCH TTI capability of the
neighboring
It shoulde becell
setoftothe DRNC.
"Supported" if the external
The
function of
this
neighbouring
cell
supports
parameter:
This
paratmeter
Enhanced F-DPCH.
neighboring cells of DRNC
It shoulde
be setMAC-d
to
support
flexible
PDU
"Supported"
the external
The involvediffactor
for setting
neighbouring
cell
supports
Fthis parameter:
the
actual cell
DPCH.
capability of the cell in CRNC.
Influence of this parameter:
This paratmeter indicates
whether the neighboring cells
of DRNC support flexible
MAC-d PDU, and should be
set according to the actual
cell capability of the cell in CRNC.
Suggestion for setting this
parameter: It should be set
according to the actual cell
capability of the cell in CRNC.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Don't Care
N/A
Fixed
No
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No
Function: frequency band of

the central frequency of the
neighboring cell
according Neighboring
to operator network
Function:
cells'
deployment.
HSPA capability
parameter is configured by
neighboring cells' HSPA
capability
Function: Location area code
according
to operator
network
Function: The
parameter
deployment.
indicates
the Max UE DTX
Cycle capability of the
Function:
maximum
transmit
neighboring
cell of DRNC.
power
Configuration
Rule:
ue actual
be set according
to the
capability(maximum
transmit
Max UE DTX Cycle capability
power)
of the neighboring cell of the
When
DRNC.this parameter is
smaller than actual UE
maximum Tx Power, if the
parameter is smaller, uplink
power
is smaller,
and vice
Function:
Mobile country
versa.
code
Adjustment Suggestion:
Configuration
Rule: This In
general,
this
parameter
parameter
should
be setwill
not
be
adjusted.
deployment.
Function: Mobile country
code
deployment.
It shoulde be set to
neighbouring cell supports
MIMO and downlink 64QAM
simutaneously.
Parameter
Function:
It shoulde be
set to This
parameter
indicates
PCPICH
transmission
power
of
the
Function
of
this
parameter:
neighbouring cell supports.
neighboring
cell.of umts
configure MNC
Configuration
neighbour cellRule: The
parameter
value is configured
This
to
satisfy the
requirement
of
parameter
need
to be
probability
right
negotiated of
with
thereceive,
UMTS
coverage
neighbourand
cell,system
and
capacity.
configurated according to the
Adjustment
MNC of the Suggestion:
neighbour UMTS
If
the parameter value is too
Cell
small, the PCPICH coverage
would be so small that the
UE's probability of right
receiving would be bad when
UE is in the edge of the cell.
If the parameter value is too
large, it would increase the
unnecessary interference,
and waste the downlink
power and decrease the
downlink capacity.
If PcpichPwrPre is "False",
this parameter is invalid.
Fixed
If the pathloss of neighboring

cell needs to be calculated for
intra-frequency or interfrequency measurement,
"Cell info" IE of intrafrequency or inter-frequency
measurement should include
the PCPICH transmission
power of this neighboring cell,
and this parameter should be
Function
"Ture". of this parameter:
configure
PLMN
of
If the pathloss
of number
neighboring
umts
neighbour
cell not
needs tocell
be
Factors
of consideration:
This
calculated
for intra-frequency
parameter
need to be
or intra-frequency
negotiated
with"Cell
the UMTS
measurement,
info" IE
neighbour
cell,
and
of intra-frequency or interconfigurated
according toshall
the
PLMN
number
of
the
not
include
the
PCPICH
neighbour
UMTS
Cell
transmission
power
of
this of
Primary
Scrambling
Code
neighboring
cell, and
this
the
neighbouring
cell of
parameter
should be "False".
adjcent
RNC
Adjustment Suggestion: At
Function:
Routing
area
present, the
pathloss
ofcode
Configuration
Rule:
neighboring cell
not This
need to
parameter
should
be set
be calculated
for intraaccording
network
frequency to
or operator
intra-frequency
deployment.
measurement, so this
Function:
ID of the
parameterRNC
not needs
to be
neighboring
adjusted. cell
according to network
deployment.
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Don't Care
No
N/A
This parameter is not used in

current SW version.
Don't Care
No
N/A

current SW version.
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No
Function: Service area code

for CS and PS domain
Configuration
Rule:
This
Function of this
parameter:
parameter
should
be
set of
configure the SANC info
according
to
network
neighbour UMTS Cell
deployment.
Factors of consideration: This
negotiated
GSM
Function ofwith
this the
parameter:
neighbour
cell,
and
configure the SANC number
configurated
of neighbour according
UMTS Cellto the
SNAC
of the neighbour
Factorsinfo
of consideration:
This
neighbour
parameter UMTS
need toCell.
be If
network
sharing
is not
used,
negotiated
with the
GSM
this
parameter
don't
need
to
neighbour cell, and
be
configured
configurated according to the
SNAC number of the
neighbour
neighbour
UMTS
Function: STTD
indicator
Cell.
If
network
sharing
Configuration Rule: Thisis not
used,
this parameter
parameter
should be is
setset as
zero
deployment.
Fixed-keep
monitoring
No
N/A
Don't Care
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
appropriate value matching

the transmission
environment, or HS-DSCH
service rate may be dropped
more.
It is set to be "Support E-DCH
Congestion Detection" in the
following cases:
1: The exterior cell supports
the E-DCH congestion control
function.
2: The parameter of
ATimeDelayJitter is
configured a appropriate
This
is not used in
valueparameter
matching the
current
SW
version
transmission environment, or
E-DCH service rate may be
dropped
Function:more.
neighboring cells's
If
A congestion
control
transmit
diversity
indicator
function is configured
to be
Configuration
Rule: This
"Support",
the
speed
of
a
parameter
should
be
set
service
over
a
related
bearer
according
to
operator
network
configure the URA info of
type
such as
HS-DSCH
deployment.
neighbour
UMTS
Cell or EDCH
may
try
to
be
adjusted
This
according
to
the
transmission
environment
between
SRNC
negotiated
the
GSM
Function
ofwith
this NodeB.
parameter:
and
the
related
neighbour
cell,URA
andnumber of
configure the
configurated
according
neighbour UMTS Cell to the
URA
infoofofconsideration:
the neighbourThis
Factors
neighbour UMTS
parameter
need toCell.
be
negotiated with the GSM
neighbour cell, and
Function:
occupied
uplink
configurated
according
to the
carrier
central
frequency
point
URA number of the neighbour
of
the
cell
neighbour UMTS Cell.
Function:
neighboring GSM
deployment.
Cell Identifier
Function:
relation
between
Configuration
Rule:
This
UTRAN
cellshould
and GSM
parameter
be set
neighboring
according to cells.
operator network
Configuration
deployment. Rule: network
model between UTRAN and
GSM interactive
If load balance from UTRAN
Function
this parameter:
to GSM isofexpected,
this
Unique
physical
parameter
shouldIdentify
be setcode
of
Neighbour
GSM Cell
"Overlap".
Parameter
function:
the In
timer
Rnc,
and related
parameter
If inter-rat
handover
is
for
Ignoring
OVERLOAD.
AdjPhyGsmCId
must exist
in
expected, this
parameter
Parameter
controlling
factor:
externalGsmCell
MO.
could
set "neighbor".
IU
portbe
interfacing
Factors
of consideration:
parametereter.The
value It's
recommended
that
the rate
influence the responding
PhyGsmCid
contain
BSC
to decrease the load the
of CN
ID and
logical
GSM Cell
ID
The
larger
parameter
value
Parameter function: the timer
means
triggers
to
reduce
the
for not allowing to increase
system
load
slower.
traffic.
The
smallercontrolling
parameterfactor:
value
Parameter
means
RNC
responses
IU port interfacing
OVERLOAD of CN more
parametereter.
timely
and triggers
to reduce
The larger
parameter
value
the
system
load
faster.
means triggers to resume the
system load slower.
The smaller parameter value
means triggers to resume the
system load more quick.
Fixed
No
N/A
Fixed
No
Yes
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Function: combination of soft

handover indicator
Main
function:Rule:
This parameter
Configuration
softer
indicates
audit timergain
of
handover the
combination
Node
B
resource.
According
There are two combination
to
the timer,
methods
for RNC
uplinkaudits
resource
in
Node
B handover:
periodly.
combination of soft
Influence
factor:
the
one is maximum ratiotimer
interval of theatNODEB
combination
the NodeB
sending
audit response
Rake receiver,
which gives
periadly;
system
cost. gain;
the highest
combination
If
the
parameter
is
too big,
the
is selective
Theother
parameter
is
The
RNC
may
can't
get the
combination at the RNC,
configuredaccording
to the
resource
status
of
the
which
gives
a
relatively
transmission
delay
from
It
is set to be "Support HSNODEB.
smaller
combination
gain.
SRNC
to
NodeB, including:
DSCH
Congestion
Detection"
If
theprotocol
parameter
is too
small,
When
MAY
is
selected,
the
The
parameter
1:
Thefollowing
value 20cases:
is
in
the
The
RNC
may
consumpt
NodeB
decides
whether
totoo
TOAWS
is
configured
configuredif
thesupports
transmission
1:
Thesystem
NodeB
the
much
cost.
implement
maximum
ratio
according
to
the
OMCR
environment
isThis
about
Main function:
parameter
HS-DSCH
congestion
control
combination
according
its
parameters
of
TOAWS
and
LEO(Low
Earth
Orbit)
orto
the
indicates the Node B number,
function.
own
physical
conditions
jitter.
The
function
of
the
transmission
delay
is
not
which
is
valid
in
RNC.
2: The parameter of
When
MUST
is selected,
protocal
paramter
TOAWS
is
more
than
20ms
.the
Influence
factor:
value
TimeDelay
is configured
athe
NodeB
is
forced
to
carry
out
to
control
the
earliest
2:
The value
100
should
set by
the is
Newwork
appropriate
value
matching
maximum
ratio
combination
acceptable
arrival
time of a
configuredif
the
transmission
the
transmission
Configuration
Rule:
which
is
usually
used
in tests.
FACH
DATA
FP
in
a NodeB.
environment
isorparameter
about
environment,
HS-DSCH
Generally,
this
isis
When
MUST_NOT
is
The
parameter
of
TOAWS
MEO(Medium
Earth
Orbit)
or
service
rate mayNodeB"
be dropped
set
to
"General
selected,
the
NodeB
is
configured
according
to
the
the
transmission
more.
Suggestion
for
setting
this
forbidden
to
carry
out and
faculty
of
delay
between
SRNC
It
is set
toprocessing
be
"Support
E-DCH
parameter:
not
suggest
maximum
ratio
combination
PCH/FACH/DCH
FPs
ininto
aand
NodeB
is between
20ms
Congestion
Detection"
the
adjust
Adjustment
suggestion:
Not
RNC.
100ms
. cases:
following
suggest
to adjust
The
parameter
of value
jitter isis
3:
maximum
1: The
The
NodeB
supports
the Econfigured
according
to the
configuredif
the
transmission
DCH congestion control
transport
jitter from a
environment
is about
function. delay
RNC
to
a
related
GEO(Geostationary
2: The parameter NodeB.
of Earth
If
the value
the is
OMCR
Orbit)
or theoftransmission
ATimeDelayJitter
parameters
of
TOAWS
and
delay
between
SRNC and
configured
a appropriate
jitter
is
too
small,
NodeB
can.
NodeB
is
more
than
100ms
value matching the
not
response
a
Timing
If
the
value
of
the
parameter
transmission environment, or
Adjustment
Control
Frame
is
too small,
therate
maxium
E-DCH
service
may bit
beto
RNC
, themay
probability
rate
ofinatime
service
be not
dropped
more.
that
a PCH/FACH/DCH
be
the HS-DSCH/EIf Afulfilled,
congestion
control data
can
not
be
sent
on
uu to be
DCH
congestion
detection
function
is configured
interface
would
be
increased
action
may
be
triggered
"Support", the speed of amore
and
the
quality
of service
with
easily
and
the
of
Parameter
function:
network
service
over
a quality
related
bearer
PCH/FACH/DCH
channel
service
with
HS-DSCH/EPlaning&Optimization
type such as HS-DSCH or Esuch
a paging
RRC
DCH
would
betodropped.
parameter.
The
number
of
DCH as
may
try
betype1,
adjusted
CONNECTION
SETUP,
If
the valueto
ofthe
the
parameter
frequency
band
supported
by
according
transmission
signalling
and
data
wthSRNC
is
too large,
the
buffer
of a
RNC.
environment
between
FACH/RACH
or
downlink
Parameter
function:
RNC
andrelated
UE
may
benetwork
applied
Parameter
controlling
factor:
and the
NodeB.
DCH
be
dropped.
Planing&Optimization
too
HS-DSCH/EIt
is high,
towould
be the
configured
by
If
the congestion
value
of the
parameter
parameter.
The
number
of to
DCH
detection
network
planner
according
is
too
large,
The
NodeB
GSM
band.
actionfrequency
may be triggered
less
actual
frequency
range used.
would
storethe
more
Parameter
controlling
factor:
easily and
quality of
Parameter
function:
network
PCH/FACH/DCH
DATA
FPs
It
is
to
be
configured
by
service with HS-DSCH/EPlaning&Optimization
and
delay
service with
network
planner
according
to
DCHthe
would
beofdropped.
parameter.
the
frequency
PCH/FACH/DCH
channel
the
actual
If the
value2G
of frequency
the
parameter
lower
range
offalsely
a specific
such
as
a paging
type1,
range
interacting
with
is configured
in3GRRC
GSM
BCCH
distribution
table.
CONNECTION
SETUP,
network.
respective NodeB, the action
Parameter
controlling
factor:
signalling
and
data
wth
of a soft/hard
handover
would
Parameter
function:
network
It
isprocessed
to be configured
by
FACH/RACH
or
downlink
be
falsely
and the
network
according
DCH
be increased
qualitywould
ofplanner
service
would be to
parameter.
the
frequency
the
actual
2G
frequency
more.
dropped.
upper
range of a specific
range
interacting
with 3Gtable.
The
parameter
GSMprotocol
BCCH
distribution
network.
TOAWS
is
configured
Parameter controlling factor:
according
to adjustingbythe
It is to be configured
value of planner
the parameter
of to
network
according
jitteractual
because
RNC's
the
2G the
frequency
process
faculity iswith
more
range
interacting
3G
steady.
network.
Fixed
Yes
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Main function: This parameter

indicates the integrity
protection algorithm that RNC
Main
function:
This parameter
supports.
At present,
UIA1
indicates
maximum
and UIA0 the
algorithm
is
Parameter
function:
the
number
of number
retransmissions
of
supported.
maximum
of
the
RRC
CONNECTION
Influence
factor:
The
needing
retransmissions of the RRC
RELEASE.
of
the operator
with
the
CONNECTION
RELEASE
Parameter
function:
network
Influence
factor:
The
integrity
protection.
COMPLETE.
For
details,
probability
receiving
UIA1:
offering
the
integrity
please
referof
toUE
"Parameter
parameter.
the
lower
range of
RRC
CONNECTION
protection
with
algorithm
Description".
a specific UTRAN FDD 1.
RELEASE;
theshould
numberfactor:
of
The paramter
Parameter
controlling
frequency.
RRC
CONNECTION
reference
with
CN
side.
the
successcontrolling
rate and time
Parameter
factor:
RELEASE
message;
system
delay
RRC connection
It is toof
bethe
configured
by
cost.
release.
network planner according to
The
bigger
the parameter
is,
The
larger
parameter
actual
frequency
rangevalue
used
the
bigger
the
number
of
helps
to
increase
the
success
in the 3G network.
RRC
rate ofCONNECTION
the RRC connection
RELEASE
is and
release, butmessage
may cause
the
higher
the
system
excessive message cost is,
Howerver,
The probability
of
retransmission
in the Uu and
UE
receiving
RRCdelay of the
increase
the time
CONNECTION
RRC connectionRELEASE
release.
can
increased.
The be
smaller
parameter
value
Parameter
function:
network
The
the parameter
helpssmaller
to decrease
the Uu is,
the
smaller the
the upper
number
oftime
messages,
decrease
the
parameter.
range
of
RRC
CONNECTION
delay
of
the
RRC
connection
lower range of a specific
RELEASE
message
is and
release and
let
UE going
to
UTRAN
FDD
frequency.
the
lower
the
system
cost
is,
IDLE
a.s.a.p.,
but it may
Parameter
controlling
factor:
Howerver,
The
probability
decrease
the successbyrateofof
It
is to be configured
UE
receiving
RRC
the
RRCplanner
connection
release.
network
according
to
function
of
this parameter:
CONNECTION
RELEASE
actual
frequency
range
used
Configure
authorised LAC
can
be3G
decreased.
in the
network.
Factors
of
consideration:
If the number
of the RNC
when
handover
resent the RRC based imsi is
turned
on, this parameter
CONNECTION
RELEASE
need
to
set,
otherwise
not
function be
ofisthis
message
equlparameter:
to NreTran
Configure
authorised
MCC
and the RNC
doesn't receive
Factors
of consideration:
RRC CONNECTION
when
handover
based imsi
RELEASE
COMPLETE
untilis
turned
parameter
waitingon,
for this
500ms,
and the
need
to be
set,the
otherwise
RNC
consider
RRC not
function
of this
parameter:
CONNECTION
has
Configure authorisedreleased.
MNC
when handover based imsi is
turned on, this parameter
need
to be
set, parameter:
otherwise not
function
of this
Configure authorised SNAC
need
to be
set, parameter:
otherwise not
function
of this
indicate the IMSI range value
function
of this
need to be
set, parameter:
otherwise not
indicate the IMSI range
length
need to be set, otherwise not
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
YES
No
Network
Planing&Optimi No
zation
N/A
function of this parameter:

indicate the MCC
need
to be
set, parameter:
otherwise not
function
of this
indicate the MNC
need
to be
set, parameter:
otherwise not
function
of this
indicate the shared MCC
need
to be
set, parameter:
otherwise not
function
of this
indicate the shared MNC
Factors
ofPathloss
consideration:
Function:
scenario
when
handover
based
imsi is
indicator, used for
downlink
turned
on,
this
parameter
power prediction in admission
need
controlto be set, otherwise not
Configuration Rule: actual
network scenario
This parameter is set based
on actual network scenario. If
Function:
hisisparameter
the pathloss
larger, the
indicates
whether
closed loop
downlink power prediction
is
mode1
is
supported
in the
larger.
cell.
Configuration Rule:
function
It shouldof
bethis
setparameter:
according to
indicate
the PLMN is
the cell capability.
common or not
configure
accordong
network
Function: The
parameter
is
planning
result.
If
the
PLMN
CS domain specific access
is
common,
thisindicator
parameter is
class
N barred
set
1,
otherwise
0
(N=0...9)
Configuration Rule:
If
the system
is highly
loaded,
Parameter
function:
network
the
operator
could
set
Planing&Optimization the
parameter
some or
parameter. to
therestrict
central
all
Acs
initating
the
CS
callbyto
frequency of carrier used
reduce the
system load.
downlink
channel.
It is decided by the network
Function:
This parameter
planner according
to the
indicates
whether
theand
cell
frequency allocation
supports
F-DPCH.
network deployment.
Configuration Rule:
It
should befunction:
set to network
Parameter
"Supported"
if the cell
supports
F-DPCH.
parameter. the indicator of
cell frequency band.
planner according to the
frequency allocation and
network deployment.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
HSDPA and HSUPA in the

cell.
Influence factor: the actual
capability of the cell; request
of the operator
The bigger the parameter is,
the longer the timer of the
user waiting to access the
UTRAN is.
The smaller the parameter is,
the shorter the timer of the
Parameter
network
user waitingfunction:
to access
the
UTRAN is, howerer, the
parameter.
system costlocation
may bearea
more
code.
higher.
Parameter
controlling
factor:
The parameter
can't be
It
is
decided
by
the
network
higher
thanFunction:
the actualThis
Parameter
planner
according
to Support
the
capability
of
the cell.
parameter
indicates
the
network
deployment.
HSUPA,
HSDPA
and
DCH.
maximum
forparatmeter
the
linear
Local
Cellallvalue
ID.
The
Reason:
ZTE
cells
support
sum
of
the
power
of
all
must
be configured as same
HSPA.
downlink
physicalofchannels,
as configuration
NODEB.
which is allowed to be used in
a cell.
Configuration Rule: It needs
to consider the coverage,
system capacity and the
actual
ability
of Node
B.
Function
of this
parameter:
it
Adjustment
Suggestion:
indicates whether MBMSIfisthis
parameter
is the
too cell.
small, the
supported in
coverage,
system to
capacity
It
is set according
the
would
belayout.If
small. But
network
it isthis
set value
to
of
this
paramter
cannot
"1", the cell support the
bigger
the actual
allowed
MBMS,than
otherwise
the cell
maximum
power
of
Node
B.
does not supprot the MBMS
Mobile Country Code.The
parameter is must be
Network planned.
Mobile network code.The

parameter is must be
Network planned.
RCP module ID of this cell.

Function: When the radio link
Function:
When
the radio
link
set is in the
out-of-sync
state,
set
is
in
the
in-sync
state,
after receiving
Node
start
timer
N_INSYNC_IND
successive
Node B
B shall
ID. The
parameter
is
T_RLFAILURE
after
receiving
in-sync
indications
Node
B
unique in the NodeB
N_OUTSYNC_IND
shall
trigger
the RL Restore
Managed
Object.
consecutive
out-of-sync
procedure and
indicate which
indications.
Node
B shall stop
radio link set has reand
reset
timer
established synchronisation.
T_RLFAILURE
upon
When the RL Restore
receiving
proceduresuccessive
is triggered, the
N_INSYNC_IND
state of the radio in-sync
link set
indications.
If T_RLFAILURE
change to the
in-sync state.
expires,
Node Rule:
B shall trigger
Configuration
the
RL
Failure
procedure
and
In order to recovery
the radio
indicate
radio link
setin
is
link in thewhich
out-of-sync
state
out-of-sync.
When the
RL to
time, the parameter
is set
Failure
procedure
is but not
relatively
small value
triggered,
the
state
of the
1 to avoid the Ping Pang
radio
link
set
change
to the
state transition.
out-of-sync state.
Configuration Rule:
The time length determined
by this parameter and
TRIFailure shall not be
smaller than the time length
determined by N313 and
T313 so that the UE can
Fixed
Yes
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
indicates the maximum times

for a paging message to be
sent.
Influence factor: the
propability of paging success;
the propablity of resourece
congestion.
the higher the propability of
Main
function:
Thisis,
parameter
paging
successful
indicates
PCCPCH
howerver,whether
the higher
the
Information
configured in
propablity ofisresourece
SIB5.
congestion is.
The
CCPCH
is a is,
The Primary
smaller the
parameter
fixed
rate the
(30 propability
kbps, SF=256)
the lower
of
downlink
physical channels
paging successful
is,
used
to carry
BCH
howerver,
the the
lower
the
function
ofchannel.
this
parameter:
transport
Parameter
Function:
This
propablity
of
resourece
indicate
the
PLMN number
of
PCCPCH
Information
is
parameter
indicates
whether
congestion
is.
cell
configured
in SIB5. level
dynamic
persistence
Factors
of consideration:
information
of SIB6 PRACH
configure
accordong
is configured
in SIB7.network
planning
result.
Configuration Rule: The
system information block type
6 contains parameters for the
configuration of the common
and
sharedfunction:
physical network
channels
Parameter
to
be
used
in
connected
mode.
PRACH
parameters
parameter.
cell scrambling
are most frequently used
code.
when
UE iscontrolling
in IDLE mode,
so
Parameter
factor:
the
default
value
is
set
to
"False"
Parameter
function:
planner according
tonetwork
the
network deployment.
parameter. routing area code.
network deployment.
RncId must be in NeId[] in
record which ANI =0 in MO
NeInfo
This
parameter
is notnetwork
be used
Parameter
function:
now.
parameter. It is required to be
configured when the cell
supports the cell broadcast
service. Otherwise, this
parameter is not required to
be configured.
Parameter
Parameter function:
controllingnetwork
factor:
parameter.
serviceto
area
planner according
the code.
Parameter
controlling factor:
network deployment.
network deployment.
This parameter is not be used
now.
Don't Care
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
N/A
No

indicates whether SIB12 is
broadcast
in thedoes
cell. not
Current version
Influence
factor: user
whether the
support multiple
FACH
measurement
detection.
This parameter is
occasion
invalid. info and
Measurement control system
Main
function:
This parameter
information
is same
in
indicates
SIB4
connectedwhether
mode and
in is
idle
broadcast
in
the
cell.
mode.
Influence
factor:
whether Cell
If the FACH
measurement
selection
and
re-selection
info
occasion info and
Main
function:
This
parameter
and
Cell
Access
Restriction
Measurement
control
systemis
indicates
whether
SIB6
same
in connected
mode
information
is same
in is and
broadcast
in
the
cell.
in
idle
mode.
connected mode and in idle
Influence
If
the Cell
selection
mode,
thefactor:
SIB12whether
is and
not recommon
physical
channel
selection
info
and
Cell
Access
needed,
informaiton
frequency
Restriction
isand
same
inis
otherwise, the
SIB12
information
is same
connected
andinin idle
needed. mode
connected
mode
mode, the SIB4 isand
not in idle
mode.
needed,
If
the common
physical
otherwise,
the SIB4
is can
indicates
whether
Main
function:
ThisSTTD
parameter
channel
informaiton
and
needed.
be
used
on
the
downlink
indicates
the
timing delay
frequency
information
is
DPCH/F-DPCH
of
the
cell.
used
for
defining themode
starting
same
in
connected
and
Influence
factor:
the
actual
time
ofmode,
SCH, the
CPICH
and
the
in
idle
SIB6
is
not
capability
of thecode(s)
cell. in a
DL
scrambling
needed,
If
STTD
can
be
used
on the
cell
relativethe
to BFN.
otherwise,
SIB6
is cell
downlink DPCH
of
the
Influence
factor:
the
number
needed.
than
parameter
is set to
of thethe
cells
with same
true,
otherwise,
the
frequency .
parameter
is setbetodifferent
false. in
The Tcell must
the same sector. If the
number of the cells with same
frequency is less than 10, the
The
is must
Tcellparameter
of these cell
must be
be
Network
different, planned.One
the value takecell
from
can
to at most
fourof
(0-9);belong
otherwise,
the Tcell
URAs
(MAX_URA=4)
those cell
which is bigger
than 10 begin with 0.
The parameter is must be
Network planned.One cell
can
belong function:
to at most
four
Parameter
network
function
of this parameter:
URAs
(MAX_URA=4)
indicate the access weight of
parameter.
the occupied
PLMN
uplink carrier
central
Factors
of consideration:
frequency
point of the
Allowed accessed
UE cell.
Parameter
controlling
factor:
number.
It
is
decided
by
the
network
The value is larger, the
planner
to the this
probility according
that a UE access
frequency
allocation
and
PLMN is bigger, the number
network
deployment.
of
accssed
UE in this PLMN
is larger, and the load of CN
resonding
to this
PLMN isis
Function: The
parameter
higher.
PS domain specific access
The
is smaller,
the
classvalue
N barred
indicator
probility that a UE access this
(N=0...9)
PLMN
is smaller,
the number
Configuration
Rule:
of
accssed
UE
in
this PLMN
It should be set according
to
is
smaller,
and
the
load
of CN
the Acess Class that
need
to
resonding
to this
PLMN is
be barred by
the operator
lower.
Function: neighboring UMTS

Cell Identifier
deployment.
If cell belongs to local rnc, the
parameter value is TRUE;
otherwise the parameter
value is FALSE.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Basic Parameters
One
physical
cell between
Function:
relation
corresponds
to
logic cell
UTRAN cell andfour
GSM
at
most.
neighboring cells.
Configuration Rule: network
model between UTRAN and
GSM interactive
If load balance from UTRAN
to GSM is expected, this
when
directly mapping
"Overlap".
transmission
layer Qos
If inter-rat handover
is
parameter
fromparameter
upper layer
expected, this
service
required, this
could betype
set is
"neighbor".
parameter should be
configured
Fixed-keep
monitoring
No
N/A
Parameter is valid only when

relative value is included in
TbType field of R8TbType
table
Fixed-keep
monitoring
No
N/A
Parameter is valid only when

QosProfileType is set as 1 in
LocRnc Table
Fixed-keep
monitoring
No
N/A

parameter Index
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
This parameter is only

applicable for Iur
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A

applicable for Iub
transmission-
Fixed-keep
monitoring
No
N/A
IP DSCP
Fixed-keep
monitoring
No
N/A
Only Valid for UpLink

Reserved Bandwidth for I/B
Traffic
Fixed-keep
monitoring
No
N/A
Only Valid for DownLink

Reserved Bandwidth for I/B
Traffic
Network
Planing&Optimi No
zation
N/A
Mobile Country Code
Network
Planing&Optimi No
zation
N/A
Mobile Network Code
Fixed-keep
monitoring
No
N/A

Bearer TypeIndex
Fixed-keep
monitoring
No
N/A

For dual stack scenario(The
IubSrvBrsType field value of
R_NeInfo
set asNE
Invalid for is
MBMS
DBS_BRSTYPE_IPANDATM)
, the TbType value
DBS_TBEARERTYPE_ATM
and
DBS_TBEARERTYPE_IP
means "ATM Bear Type will
be first selected" and "IP
Bear Type will be first
selected", which means even
the TbType is set as
DSCP for IP
DBS_TBEARERTYPE_ATM,
valid IpDscp should also be
configured.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A

Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A

for DCH I/B Traffic
Fixed-keep
monitoring
No
N/A
Downlink Reserved
Bandwidth for DCH I/B Traffic
Fixed-keep
monitoring
No
N/A

for HSPA I/B Traffic
Fixed-keep
monitoring
No
N/A
Downlink Reserved
Bandwidth for HSPA I/B
Traffic
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
Yes
N/A
Network
Planing&Optimi Yes
zation
N/A
Don't Care
YES
No
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES

configure
the network
Mobile Country
Code sharing
mode
network sharing mode .
MOCN: support shared
carrier sharing and dedicated
Mobile
Network RNC
Codeconnect
carrier sharing,
multi operator CN, and RNC
function
of this parameter:
select operator
for nonConfigure
supportingIuflex
UE the NAS
node
selection
GWCN:
supporttimer
shared
Factors
of
consideration:
the
carrier sharing
and dedicated
time
tolerance
of
CS
paging
carrier sharing, The CN can
CN
be shared by multi operator,
The
value
is bigger,
the for
and CN
select
operator
paging
without TMSI
non-supporting
UE success
rate
is higer,
thesupport
number of
MultiPlmn:
Function
ofonly
this
parameter:
it
cached
IMSI
in
RNC
is larger,
dedicated
carrier sharing,
indicates
whether
MSCH
is
and
the
occupied
memory
is
RNC
route
UEnot.This
to the
operator
supported
or
function
larger.
the
cell
belong
to
function
ofUE
thisreceive
parameter:
can
make
in DRX
The
value
is smaller,
the
0xFF:
network
sharing
is notof
Configure
authorised
SNAC
in
order
to
save
the
energy
pagingthe
without
TMSI
success
used.
value
must
be
0xFF
Factors
of
consideration:
UE.
rate
ishandover
lower,
thebased
number
of is
the
network
sharing
when
imsi
Factors
of consideration:
the
cached
IMSI
in
RNC
is
feature
is not
turned
on,
thislicensed
parameter
energy
of
UE
smaller,
andset,
theotherwise
occupied
need
be
If
the to
operator
turn on the not
memory
is smaller.
function, UE can receive the
MBMS service in DRX, this
can save the battery
consuming of UE and
Function
of this
parameter:
improve the
performace
of It
indicates
the
cell
identity.
UE.
It
according
If is
theset
operator
turntooffthe
the
network
and
cell
function,layout
UE can
notthe
receive
Function:
mode
of
identity
of Diversity
RNC
is uniquely.
the MBMS
service
in
DRX,
PICH.
If
thecan
MBMS
is not
used,
thisit
this
not
save
the
battery
Function
of this
parameter:
Configuration
Rule:
It is
parameter
isofinvalid
consuming
UE .dedicated
indicates
whether
recommended
the this
If the MBMS
is that
not
used,
E-DCH
use
the
E-AGCH
of is
diversity
mode
of
P-CPICH
parameterE-DCH
is invalid
common
in
implemented for MICH.
Cell_FACH
Adjustment Suggestion: It is
Factors
of consideration:
This
parameter
indicates
the
recommended
that
the the
downlink
channelization
code
paramenters
of
Prach
is
used
Function
of
this
parameter:
diversity mode of P-CPICH itis
resource,
the for
scheduling
ofEfor
R99 Prach
or MICH.
common
indicates
whether
activating
implemented
UE
in
time
DCH,Cell
andand
is used
to index
Dual
MIMO
at the
When
this parameter
is set
the information
Randomsame
time
in theofRNC.
to'OFF',
dedicated
E-DCH
access
in
R99
an
Common
Factors of consideration: the
use
the different
channel
E-DCH
network
layout, the
HSDPA
code of the common
E-DCH.
throughtput
of UE
When
parameter is
is set
set to
When this
the parameter
to'ON',
One
of
E-AGCH
"support", RNC supportsinthe
dedicated
E-DCH use
theCell
fuction of activating
Dual
same
channel
code
of
and MIMO at the sameEtime
AGCH
in thelink
common
Ein the radio
setup or
DCH, this will save
reconfiguration,
thisone
will
channelization
code resource
increase the HSDPA
of
SF256, but
the waitting
throughput
of UE,
otherwise,
time
of
E-AGCH
information
RNC does not support
the
in
Collision resolution of
function.
Common
E-DCH
phasethe
may
RncMIMOInd
indicates
abovesupports
the Maximum
period
RNC
the MIMO
for
collision
resolution phase
funtion
and DcHsdschSptInd
which
will
make
thesupports
UE
indicates the RNC
release
the
resources.
Dual Cell funtion, but both the
two parameters set to support
do not means the cell can
active the MIMO and Dual
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Factors
theit
Functionofofconsideration:
this parameter:
network
layout,
the
HSDPA
indicates whether activating
throughtput
of MIMO
UE at the
Dual Cell and
When
the
parameter
is set
same time in the DRNC
cell.to
"support",
cell
supports
the
fuction
oflayout,
activating
Dual Cell
network
the
HSDPA
Function
ofat
this
parameter:
and
MIMO
the
same
time
throughtput
of
the
number
of UE
cells
updating
in the
radio
link
setup
orset to
When
the
parameter
is
SIB3
when the state
of Iu is
reconfiguration,
this
will
"support",
DRNC
cell
changed
or
when
the
DSAR
increase
the
supports
the HSDPA
fuction of
switch
is
changed.
Function
ofDual
this
parameter:
throughput
of
UE,
otherwise,
activating
Cell
and the
Factors
of
consideration:
the
time
interval
updating
cell
does
not
support
thein the
MIMO
at
the
same
time
load
of
Iu , signalling
SIB3
among
cells
when
function.
radio link setup
orin otherthe
connection
Uu
state
of Iu isofchanged
orthe
MimoSuptInd
indicates
reconfiguration,
this will
frequencies/systems
when
the
DSAR
switch
is
cell
supports
the
MIMO
increase
the
The
value
of HSDPA
this parameter is
changed.
funtion
and
Function
of of
this
parameter:
throughput
UE,
otherwise,
larger,
more
cells
need
totheit
Factors
ofnot
consideration:
DcHsdschSupptInd
indicates
indicates
whether
the
cell
does
support
the
update
the
SIB3 when
the
load
of Iu
, signalling
the
cell
supports
Dual Cell
available
subchannel
function.
state
of
Iu
is
changed
or
connection
of
Uu
in
other
funtion,
but both
the twothein
numbers
consecutive
MimoSuptInd
indicates
when
the are
DSAR
is do
frequencies/systems
parameters
set toswitch
support
the
cell.
DRNC
cell
supports
the
changed,
the
load
of
Iu
chang
The
value
this
parameter
is
not
means
the
cell
can active
Factors
of of
consideration:
theof
MIMO
funtion
and
more
quickly,
but
PingPang
smaller,
the
time
interval
of
the
MIMO
and
Dual
Cell
in
cell
radius,
thehappens
access
time
IurDcHsdsSuptInd
indicates
the
load
of
Iu
moreof
updating
the
SIB3
is shorter
the
radio
link.
random
access
the
DRNC
cell
supports
Dual
easily,
thestate
signalling
when
the
ofboth
Iuset
isthe
If
this
parameter
is
to
"0",
Cell
funtion,
but
two
connection
of
Uu in
other
changed
or
when
the
DSAR
the
available
subchannel
parameters set to support
do
frequencies/systems
switch
is changed,
themay
loadcan
of
numbers
may
less
than
not
means
thebe
DRNC
cell
change
quickly.Otherwise,
Iu
chang
more
quickly,
but
the
AvailSubChanNum,
the
active
the need
MIMOtoand
Dual
less
cells
update
PingPang
of
the
load
of Iuthe
probability
of
node
B
Cell
in
the
radio
link.
Function:
This
SIB3,
themore
load parameter
of
Iu change
happens
easily,
the is
receiving
the but
same
signature
used
to
calculate
the
timing
more
slowly,
PingPang
of
signalling
connection
of Uu
in
will
bigger,
the access
time
relationship
PRACH
the be
load
of Iubetween
happens
more
other
frequencies/systems
of
random
access
will
be
preambles,
the
diffcultly,
thebetween
signalling
may
change
longer.
PRACH
preamble
and
connection
of
Uu
will
change
quickly.Otherwise,
If
this parameter
is the
set time
to "1",
PRACH
message,
between
smoothly.
interval
of updating
the SIB3
the
available
subchannel
AICH
andthe
PRACH
and
is
longer,
load of
Iu the
numbers
is
the
available
access
slot
of each
change more slowly,the
but
AvailSubChanNum,
ASC.
PingPang
of
load
Iu
probability
of the
node
BIt of
Configuration
Rule:
should
Function:
Cell
Identity.
happens
more
diffcultly,
the
receiving
the same
be
set according
to signature
the
cell
Configuration
Rule:
CId
of
signalling
connection
of
Uu
will
be smaller, the access
radius.
different
cells
ofaccess
the same
will
change
smoothly.
time
of random
will
Adjustment
Suggestion:
It be
RNC
should
be
different.
shorter.be set to 1 if the cell
should
Adjustment
Suggestion:
Function:
Common
It
should
be
setthan
to 0Physical
if120KM.
theCId
cell
radius
is larger
of
different
cells
of
the
Channel
Identity.
radius is larger
than same
RNC
should
be
different.
The
value
represents
Configuration
Rule:
200KM.Otherwise,
itCPCId
isthe of
number
of
SF512
codes.
different
common
physical
suggested
to be set
as 1 This
parameter
used
in the
channels ofisthe
same
cell
procedure
of
decreasing
the
should
be
different.
Function: Common Physical
number
of
the
HS-PDSCHs
Adjustment
Suggestion:
Channel Identity.
based
on
codeRule:
occupation
CPCId
of different
common
Configuration
CPCId of
ratio
of
the
HS-PDSCH
physical
channels
of
theand
different common physical
NonHS-PDSCH
channels
same cell of
should
be different.
channels
the same
cell to
avoid
DPCH
code
should
be Diversity
different.mode of
Function:
congestion.
The value of this
Adjustment
Suggestion:
AICH.
parameter
represents
the free
CPCId
of different
Configuration
Rule:common
Itinisthe
SF512
code
number
physical
channels
the
recommended
thatofthe
code
sametree.
cellmode
should
be
different.
diversity
of
P-CPICH
is
Congfiguration Rule: HSDPA
implemented
for
AICH.
service throughput
Adjustment
Suggestion: It is
congestion probability,
recommended
the
HSDPA servicethat
average
diversity
mode
of
P-CPICH
is
throughput, R99 service
implemented
for AICH.
DPCH
code congestion
probability.
If the parameter's value is too
big, the HS-PDSCH number
will be decreased when there
are still many free codes in
the code tree. In this case,
the free codes are not used
by DPCH sufficiently and the
HS-PDSCH number may not
be increased even if DPCH
used few codes.
If the parameter's value is too
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
fixed
No
YES
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
occupation
of the Control
HSused in the ratio
Admission
PDSCH
and
NonHS-PDSCH
to calculate the throughput of
channels.
The value of
this
current HS-PDSCHs
and
in
parameter
represents
the
free
the Code Resource
SF512
code
number
in
the
Management to calculate the
code tree. and minimum HSmaximum
Congfiguration
Rule: HSDPA
PDSCH number.
service
throughput
The average throughput of
congestion
probability,
one HS-PDSCH
channel
HSDPA
service
averageby
should only determined
throughput,
service
the wireless R99
channel
quality.
DPCH
code
congestion
So
the
default
value
is set
Function:
This
parameter
probability.
according
to the
lab test and
indicates
the
HS-PDSCH
If
thetest
parameter's
value is too
field
results.
code
resource
is shared
big,
the
HS-PDSCH
number
Increasing
among
the the
cellsvalue:
of
theMore
same
will
not
increase
unless
HSDPA
users could be there
NodeB.
are
manyand
freeHSDPA
codes in the
admitted
Configuration
Rule:
NodeB
code
tree. In
this
case,
the
throughput
congestion
is
capability,
HSDPA
traffice
free
codes
can
not
be
used
more
toparameter
trigger,
and
Function:
load
ofdifficult
theThis
cells
of the same
by
HS-PDSCH
sufficiently.
the
cell
load
in
load
balance
indicates
the
cell
maximum
NodeB
If
the
parameter's
value
too
is
lower.
But
the
min
andis
number
of
the
HS-PDSCHs
Adjustment
Suggestion:
Ifmax
small,
the
code
reserved
for
HS-PDSCH
number
will beand
Configuration
Rule:
Traffic
NodeB
this
capability
DPCH
ishas
not
enough
the
Function:
This
parameter
increased
which
leadsand
to
load
the
total
HSDPA
traffic
load of
possibility
of
DPCH
code
indicates
the
cell
minimum
higher
probablity
of
R99
Adjustment
Suggestion:
the
cells offailure
the
same
NodeB
allocation
(DPCH
number
of
the
HS-PDSCHs.
DPCH
code
congestion.
Usually,
in order
to
makecode
the
is
not
higher
than
the
congestion)
will
increase.
Congfiguration
Rule:
HSDPA
Because
the
min
HS-PDSCH
best
use
of
free
codes,
the
maximum capacity of these
service
throughput
number
isparameter
increased,
the
parameter
could takecould
the be
cells, the
congestion
probability,
average
user
throughput
value
the
license
HS- will
set
to of
"Sharing"
HSDPA
service
average
be
increased
thereby
are
PDSCH
number
bought
Function:
Thiswhen
parameter
throughput,
R99
service
only
a
few
HSDPA
users.
the vendor.
it could be
indicates
theBut
E-AGCH
DPCH
code
congestion
When
reduced
if HSDPA
there
areuser
lots of
numberthe
probability.
number
is
large,
becasue
DPCH
code
congestion.
Configuration Rule: Traffic
Adjustment
Suggestion:
there is no Streaming
HSDPA
load
The
larger
the
parameter
is,
service,
changing
the Each
Adjustment
Suggestion:
Function:
This
parameter
more
codes
are
reserved
for
parameter
value
will
not
affet
E-AGCH
can
scheduleof16-25
indicates
the number
the
HSDPA
services;
the
average
user
throughput
HSUPA
users. The larger the
E-RGCH/E-HICHs
The
smalleris,the
parameter
is,
obviously.
parameter
the
more
Configuration
Rule:
Traffic
Function:
When
the
HSmore
codes
are
available
for
And
vice
verser.
HSUPA users can be
load
PDSCH
number
smaller
DPCH.
admitted
in aSuggestion:
cell.isBut
theEach
Adjustment
than
the
parameter,
the HSless
the
downlink
E-RGCH/E-HICH
canbe
bear 20
PDSCH
number
can
channelization
codes
could
HSUPA
users.
The
larger
the
adjusted
to other
the parameter
be
used by
downlink
parameter
is,
the
more
value
directly
if the criteria to
physical
channels.
HSUPA users
can
be
Function
of this
parameter:
it
increase
the
HS-PDSCH
admitted
a cell. to
Butdrop
the the
indicates
whether
number isin
satisfied.
less
theordownlink
DPCH
F-DPCH
code of the
Configuration
Function:
ThisRule:
parameter
channelization
codes
could
link
Iur.
If theover
paramter
is too big,
a
indicates
the HS-SCCH
be
used
by
other
downlink
Factors
of
consideration:
few HSDPA services maythe
number
physical
channels.
ratio
of
drop, codes
the
used
upservices
all
free
SF16
Configuration
Rule:
throughput
of
HSDPA.
which
increases
the
possiblity
If it is too big, the code
If
the
operator
turn
on this
of
DPCH
code
allocation
allocated
to HS-SCCH
can
function,
it
will
release
failure
(DPCH
code
not be used by other the
DPCH
or F-DPCH code of the
congestion).
channels.
link
over
in the
of
If itthe
parameter
is process
too
small,
If
is
tooIur
small,
the
number
code
re-assignment,
this
will
the
HS-PDSCH
nubmer
will
of HSDPA user can be
increase
the
of
be
increased
slowly.
scheduled
in throughput
each
2ms subHSDPA
in
cell,
but
it
will
frame is limited and the
increase
the ratio ofcan
services
HSDPA throughput
not
drop.
reach the peak value.
Function:
This turn
parameter
If the operator
off this
indicates
SF32 the
function, itreserved
will not release
codes
for the
MBMS
DPCH number
or F-DPCH
code
of the
services
link over Iur in the process of
Configuration
Rule: this will
code re-assignment,
This
parameter
should
be set
limit the
throughput
of HSDPA
according
planned
, but it will to
notthe
impact
the ratio
MBMS
services
of services
drop.number and
data
rate.
It is recommended
to set the
value to 'Off' if there only a
few neighbouring cells to
reduce the possiblity of call
drop. Otherwise, it can be set
to 'On'
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
YES
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES

indicates
Fucntion: whether
Indicate the
the function
period
to
re-assign
the
downlink
to judge whether to re-assign
DPCH
channelisation
code in
the DPCH
code.
HSDPA
cell
is
supported
or
Configuration Rule:
not.It
should
be
set
to
The smaller the value is, the
"Supported"
if the operator
shorter
the interval
is to judge
bought
feature. the
whetherthis
to re-assign
DPCH code.
Function:
The
parameter
The smaller
the
value is, the
indicates
the
period
longer the interval isto
to judge
judge
whether
to
adjust
the
HSwhether to re-assign the
PDSCH
number.
DPCH code.
Configuration
Rule:
It
If
it is toobe
long,
HSshoulde
set the
to smaller
PDSCH
number
can not be
value if the
HSDPA
adjusted
in
time.
throughput congestion is
If
it isfunction
too short,
frequent HSfrequently
happened.
The
of this
PDSCH number
adjustment
parameter:
This parameter
Function:
The
parameter
will take too
much
system
indicates
whether
the
RNC
indicates
the Enhanced
time
unit ofLayer
resource
such
as CPU.
supports the
CodeUptPrd.
Function:
level function
2
function RNC
or not.This
function
switch
64QAM in HSPA+
can be of
supported
Configuration
Rule: Itnetwork.
should
and
HSPA Evolution
be set
to "Supported"
the
The
involved
factor forifsetting
operator
pay forCell
this feature.
this
parameter:
Adjustment
Suggestion:
throughput,
whether
the RNC
Function: RNC
level function
Supporting
this
funtion
will
supports
Enhanced
Layer
switch
of the
Enhanced
F-DPCH
increase
2
functionthe
or HSDPA
not.
Configuration
Rule: It should
throughput.
Influence
of this parameter:
be set to "Supported"
if the
This
parameter
operator pay forindicates
this feature.
whether
the Suggestion:
RNC supports
Adjustment
More
the
Enhanced
Layermultiplex
2
HSDPA users could
function
or not.
If cell
on the same
E-F-DPCH
supporting
comparing Enhanced
to F-DPCHLayer 2
function or DL Enhanced
CELL_FACH
existed
in the
Function: RNC
level function
RNC,
this
parameter
must
be
switch of F-DPCH
set
to
"open";
else,
this
parameter
can be set iftothe
be set to "Supported"
"open" orpay
"closed";
operator
for this feature.
Suggestion
setting this
Adjustment for
Suggestion:
parameter:
If
cell
supporting
Function:
RNC level
function
Multiple HSDPA
users
could
Enhanced
Layer
2
function
switch
of
MIMO
use the same F-DPCH
so or
DL
Enhanced
CELL_FACH
Configuration
Rule:
It
should
that more code is saved.
existed
the RNC, this
be
set toin"Supported"
if the
parameter
be
to It
operator
pay
forparameter:
thisset
feature.
Function
ofmust
this
Function:
This
parameter
"open";
else,
this
parameter
Adjustment
Suggestion:
is
the switch
to
control
wether
indicates
RNC
can
be setwhether
to
"open"
or will
Supporting
this
funtion
the Frequency
Converge
supports
to
activate
downlink
"closed";
Enhanced
Layer
2
increase
the
HSDPA
funtion is applied to B Traffic
64QAM
and
at the
the cell
functionservices.If
can MIMO
improve
throughput.
MBMS
the
same
time.is"open",
Iub throughput
and UE can
parameter
Configuration
Rule:
suggested
be
set to
receive theto
services
in softIt
should
be
set
to
"support"
as
soon
the
combining, so thatas
it can
"Supported"
if
the
RNC
equipment
supports.
reduce the required power
supports
MIMO and
resource activate
.
64QAM of
at consideration:
the same time.
Factors
Power Resource and
compute load of RNC.
If turn on this function, the
probability of UE receive the
services in soft-combining is
higher, so that the SCCPCH
will send the services in less
power, but the compute load
of RNC is higher.
If the MBMS is not used, this
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
MBMS services.
downlink power resource.
If the operator turn on this
function, RNC will firstly
choose the
frequency,
Function
of prefer
this parameter:
It
UE
can receive
service
indicates
the cellthe
number
ofina
soft-combining
easily,
frequency layermore
in a MBMS
then
the
required
power
of
service area code.
SCCPCH
will
be
lower,
but
the
compute
load of RNC is
range
of the service.
higher.
If
theparameter
operator turn
off thisa
This
is larger,
function,
RNC
will
not
choose
frequency layer in a MBMS
the
prefer
frequency,
UE
service area code containcan
receive
the more
service
in will
softmore cells,
cell
bear
combining
more
diffcultly,
the MBMS
service.
Function
of
this
parameter:
then
the required
power
of aIt
This
parameter
isidentity
smaller,
indicates
the
cell
in a
SCCPCH
will
beinhigher,
but
frequency
layer
a MBMS
MBMS
SAC.
the
compute code
load of
RNC is
service
contain
It
is set area
according to
the
lower.
less
cells,
less cell will bear
network
layout.
If
the
MBMS
is not
used, this
Function
ofservice.
this
parameter:
It
the
MBMS
If
the
MBMS
is
not
used,
this
Function
of
parameter:
It
parameter
isthis
invalid
indicates
whether
the
MBMS
If
the
MBMS
is
not
used,
this
parameter
is
invalid
indicates
the
downlink
UTRA
cell is on MBMS
preferred
parameter
is invalid
absolute
RF channel number
layer
in SAC.
of the Cells
in the MBMS the
Factors
of consideration:
Function
of
this
Service Area.
compute
load
ofparameter:
RNC and It
indicates
the
frequency
If the MBMS
is not
used,band
this
downlink
power
resource
used
by
the
cells
in
the
parameter
is
invalid
If a SAC set the MBMS
MBMS service
preferred
layer,area.
MBMS
It
is set according
the
services
will be settoup
in this
frequency
resource
of
thenot
preferred layer, RNC will
operator
andprefer
the network
choose the
frequency,
layout.
this will decrease the
If
the MBMS
used,
compute
loadisofnot
RNC,
butthis
the
parameter
is invalid
required
power
of SCCPCH
may be higher than the
method of choosing the
Function
of this parameter:
It
prefer frequency
automaticly.
indicates
the
MBMS
service
If a SAC does not set the
area
code.
MBMS
preferred layer, RNC
It
is choose
set according
to the
will
the prefer
network
layout.
frequency
automaticly, this
If
the
MBMS
is not
used, this
will
increase
the
compute
Function
of this
parameter:
It
parameter
is invalid
load of RNC,
but the country
required
indicates
the
mobile
power of SCCPCH may be
code.
lower
than
the method
It
is set
according
to theof
choosing
the prefer frequency
network layout.
automaticly.
If
the MBMS
is not
used, this
Function
of this
parameter:
It
If
the
MBMS
is
not
this
parameter
is
invalid
indicates the mobileused,
network
parameter
is invalid
code.
It
is set according
to the
Function
of this parameter:
It
network
layout.
indicates the common
If
the MBMS
not
this
Function:
Thisis parameter
physical
channel
IDused,
of MICH
parameter
is
invalid
indicates
number
in order tothe
identity
theof NI
(Notification
Indicators)
that
different physical
channel.
one
MICH
radio
frame
It should be guaranteed that
contains.
Common Physical Channel
Configuration
Rule:
ID is unique for
one common
Considering
the capacity
physical channel
within a cell.
requirement
If the MBMS of
is the
not MICH
used, this
notification
downlink
parameter isand
invalid
power resource.
The larger NI, the lower the
repetition of each NI, and the
higher power is needed. So in
order to save power this
parameter should be set to
the minimum values which
satisfies the notification
requirement.
Network
Planing&Optimi No
zation
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A

indicates the control method
Function:
Diversity
mode of
to share the
HS-PDSCH
MICH.
channelisation codes among
Configuration
is
the cells of theRule:
sameIt NodeB.
recommendedRule:
that the
Configuration
HSDPA
diversity
mode
of P-CPICH
is
traffice load
of the
cells of the
implemented
for
MICH.
same
NodeB
Function:
This
parameter
Adjustment
Suggestion:
It
Adjustment
Suggestion:
If is
the
indicates
the
period
to update
recommended
that
the
total
HSDPA
traffic
load
of
the
the HS-PDSCH
code the
diversity
mode
of NodeB
P-CPICH
is
cells of the
same
number
to
share
for
eachisone
implemented
forthe
MICH.
not
higher
than
maximum
of the cells of the same
capacity
NodeB. of these cells, the
parameter
could
be The
set to
Configuration
Rule:
"Sharing".
parameter should be set to
This
function
save the
guarantee
thatcould
the HSoperator number
capex. But
the
PDSCH
adjustment
hardware
resource
for each
can
track
the
HSDPA
Function:
of
cell
is lessDiversity
than
themode
normal
througuput
violation
of
P-CCPCH.
cell
so the
HSDPA
throughnot
different
cells,
but should
Configuration
Rule:
It normal
is
will
be
lower
than
the
set
too small
which
may
lead
Function:
Diversity
mode
of
recommended
that
the
cell.
So itthe
is suggested
not to
to adjust
HS-PDSCH
P-CPICH.
diversity
mode
of
P-CPICH
is
support
this
in hot
number
overfunction
frequently.
The
Configuration
Rule:
Cell
implemented
for
MICH.
area.
smaller
this Suggestion:
parameter
is,It the
MIMO
capability
and antenna
Adjustment
is
more
frequently
the
max
configuration
recommended that the HSPDSCH
differentis
Adjustment
Suggestion:
diversity number
mode
ofofP-CPICH
cells
are
changed.
For
the
cell
supporting
implemented for MICH.MIMO,
Function:
Indicate
the
it should be
set to "Inactive"
if
mapping
between
AC
the pilot configuration and
is "PASC
CPICH+S-CPICH".
Function:
AsigStIdx
and
Configuration
Different
For the cell
notRule:
supporting
AsigEndIdx
indicate
theto
Ac
is mapping
different
MIMO,
it shouldtobe
set
starting
index
and
end
index
ASC
according
to
the
"Active" if the wirelesspriority
of
the
signature
for
each
ASC
configuration.According
to
the
environmnet is bad and two
Configuration
Rule:
The
specifications,
AC0-AC9
are
antennas are built.
signature
number
ofand
different
mapping to
the same
ASC
Function:
AsigStIdx
ASC
should
be
set
according
and AC10-AC15
canthe
be
AsigEndIdx
indicate
to
the ASC
and
user
mapping
to priority
different
ASCs
starting
index
and end
index
number.
respectively.
of the signature for each ASC
The
larger theRule:
signature
Configuration
The
range is, the
moreof
signatures
signature
number
different
are
forset
a certain
ASCavailable
should be
according
ASC.
to the ASC priority and user
The
smaller the signature
number.
range
is, the
signatures
The larger
theless
signature
are available
for a available
certain
Function:
Indicate
range
is, the
more
signatures
ASC.
subchannels
ASC
are available for
for each
a certain
Configuration
Rule: The
ASC.
subchannel
ASC
The smaller of
thedifferent
signature
should
be
set
according
to
range is, the
less signatures
Function:
Indicate
available
the
ASC
priority
and
user
are available for each
a certain
subchannels
number.
ASC.
PRACH
subchannel of different
PRACH should be set
according
to the
user number
Function: Cell
Identity.
and
priority
of
the
ASCs
Configuration Rule:
CId of
mapped
to
the
PRACH.
different cells of the same
RNC should be different.
Adjustment Suggestion: CId
of different cells of the same
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

indicates the initial dynamic
persistence
level used
by the
Function: Common
Physical
MAC
layer
to calculate the
Channel
Identity.
transmission
for of
Configurationpossibility
Rule: CPCId
the
ASCi>=1.
different
common physical
Configuration
Rule:
The
channels of the
same
cell
parameter
should
be
should be different. set
according
the traffic load of
AdjustmenttoSuggestion:
the
cell.of different common
CPCId
The
smaller
the parameter
physical
channels
of
Function:
Indicate
thethe is,
the
more
could
transmit
same
cellUE
should
be
different.
maximum
number
that
the
the
PRACH
preamble
PRACH preamble can at
bethe
same
time. L1 receives ACK
sent before
The
larger
or NACK. the parameter is,
the
less UE could
Configuration
Rule:transmit
It should
theset
PRACH
preamble
the
be
according
to theatcell
same
time.power ramp step
coverage,
Adjustment
Suggestion:
The
and
max PRACH
Tx power.
Function:
The
parameter
higher
the
cell
traffic
load
The
larger
the
value
is, theis,
defines
thethe
max
random
the
larger
parameter
larger
probablity
the preamble
access
procedure
should
be
set, andrepetition
less
UE
beingofacknowledged
is and
time
MAC
layer.
couldthe
sent
the preamlbe
at
also
larger
the
uplink
Configuration
Rule: The
the
same time.
interference
is.
larger the value is, the more
Function:
times that This
MACparameter
could try the
configures
the number
of
random access
procedure.
ASC for the PRACH
Configuration
Rule:
Functions: This
parameter
The
larger
the
value is, the
indicates the preamble
more ASC can
beindex.
defined.
scrambling
code
MAX_ASC=8
Configuration Rule:
The 16 PRACH preamble
Function:
parameter
scramblingThe
code
are PRACH
Parameter
Function:
defines
the
threshold
to Step.
determinedPower
by theRamp
Primay
Preamble
detect
the
PRACH
preamble.
Scrabling Code
of the
cell.
Configuration
Rule:
It needs
Configuration
Each
PRACH
will
beIf the
to consider
theRule:
system
paramter
value
too large,
allocatedon
a scrambling
code
demand
the is
timeliness
of
the
larger16access
will
in these
codes.power
accessing
system
and cell
be
required and it is difficult
capacity.
to
access
to utran;
If the parameter
value is too
If
the
parameter
value is too
big, the initial PRACH
small,
it
is
easy
to
transmission poweraccess
might to
be
the big,
utranit but
thegenerate
receiving
too
would
quality
is bad.
Function:
Thispower
parameter
unnecessary
wasteis
Function:
This
parameter
used
by the
MAC
layer
to
and affect
the
cell
capacity,
indicates
number
of ASC
calculate
the transmission
but the access
process
would
which
is configured
the
possibility
for the access
be short.
Persistence
Factor
service
classScaling
whose
ASC
isin
If the parameter
value
is too
PSF[MAX_ASC_PSF].
not
less
than
2. Where
small,
the
initial
PRACH
Configuration
Rule:
MAX_ASC_PSF
=6.would be
transmission power
This
parameter
should
set
Configuration
Rule:
The
more
reasonable,
but
itbe
would
Function:
This
parameter
according
to
the
requirement
larger
the
value
is,
the
larger
have
morewhether
preambles
for
indicates
PRACH
to
differentiate
the the
priority
of
probability
theit UE
can
tranmit
power
ramp,
would
make
information
is
broadcast
in
AC0-AC9,
AC10,
AC11,
the
PRACH
preamble.
the
process longer.
SIB5access
orAC13,
SIB6.
AC12,
AC14 and
Configuration
There
AC15. And theRule:
number
must
SIB5
to transmit
shouldbebea the
number
of
the
PRACH
settings
forAccess
Idle
priorities
among
these
mode.
If
the
PRACH
Classes.
configuration
RRCis, the
The larger thefor
value
Connected
mode
is different
more ASC are
cofigured
from
the Persistence
PRACH
different
Scaling
configuration
for Idle mode,
Factor.
the
MAX_ASC_PSF=6.
to 'SIB6' or 'SIB5 and SIB6to
broadcast the PRACH
settings for RRC Connected
mode.
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fucntion: This parameters

indicate the available
signatures.
Configuration Rule:
Function:
mode are,
of
The more Diversity
the signatures
SCH.
the less probablity that two
Configuration
It is
preambles willRule:
be collided.
diversity mode of P-CPICH is
implemented for MICH.
Adjustment Suggestion: It is
diversity mode of P-CPICH is
implemented
MICH.
Function:
RCPformodule
number.
Function: RcpScrStartId and
RcpScrEndId indicate the
starting and end index of the
available uplink scrambling
code index of a RNC.
Configuration
Rule: All uplink
Function: RcpScrStartId
and
scrambling
code
are the
RcpScrEndId indicate
segmented
starting andaccording
end indexto
ofthe
the
RCP
number
and
they
are not
available uplink scrambling
overlapped.
code
index of a RNC.
Configuration Rule: All uplink
scrambling code are
segmented
according
to the
This parameter
indicates
RCP
number
and
they
whether AMR 4.75kbpsare
is not
overlapped.
used
or not. AMR 12.2kbps is
most frequently used. And
other AMR modes can be set
to
"Not
used". indicates
This
parameter
whether AMR 5.15kbps is
used or not. AMR 12.2kbps is
to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
to
"Not
used". indicates
This
parameter
to "Not used".
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
YES
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A

to
"Not
used". indicates
This
parameter
Function:
This
parameter
used or not.
AMR
12.2kbps is
indicates
whether
AMRAnd
rate
most frequently
used.
adjustment
is suppported
other AMR modes
can be or
set
not.
to "Not used".
Configuration: If the multi-rate
AMR are supported and the
CS voices traffic load is very
high, for example DPCH no
codeparameter
is frequently
took place,
This
indicates
that
dynamic
AMR 6.6kbps
rate
whether
WB AMR
is
adjustment
could
effectively
used or not. WB AMR
reduce
the system load, the
12.65kbps/8.85kbps/6.6kbps
funciton
should beused.
open.And
is most frequently
otherparameter
AMR modes
can be set
This
indicates
to
"Not used".
whether
WB AMR 8.85kbps is
used or not. WB AMR
is most frequently used. And
otherparameter
AMR modes
can be set
This
indicates
to
"Not used".
whether
WB AMR 12.65kbps
is used or not. WB AMR
otherparameter
AMR modes
can be set
This
indicates
to
"Not used".
whether
WB AMR 14.25kbps
otherparameter
AMR modes
can be set
This
indicates
to
"Not used".
whether
WB AMR 15.85kbps
other
AMR modes
can be set
This parameter
indicates
to
"Not
used".
whether WB AMR 18.25kbps
other
AMR modes
can be set
This parameter
indicates
to
"Not
used".
other
AMR modes
can be set
This parameter
indicates
to
"Not
used".
to "Not used".
Fixed
Yes
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES

Function:
Identity.
other AMRCell
modes
can be set
Configuration
to "Not used". Rule: CId of
Function:
Physical
of differentCommon
cells of the
same
Channel
Identity.
RNC should
be different.
Configuration Rule: CPCId of
channels of the same cell
Function:
should be Diversity
different.mode of
S-CPICH.
Configuration
Rule:common
Cell
CPCId of different
Portion
and
physicalconfiguration
channels of the
Function:
This
parameter
antenna
same cellconfiguration.
should
be different.
indicates
theSuggestion:
polling period
Adjustment
when
the CS/PS
It shoulde
be set domain
to "Active" is
DSAR
(Domain
Specificin the
S-CPICH
is transmitted
Access
Restriction)
orare
celltwo
cell portion
and there
restriction
operate
in
the
Function:
This
parameter
antennas.
method
"Polling".
indicates
switch
of the
Function:ofthe
This
parameter
Configuration
Rule:
Cell
Restriction.
If
this
indicates the number of
The larger
valueClass)
is, thein
parameter
is
"Close
Cell
Barred
AC the
(Access
larger
the period
ofwhen
barring
Restriction
by
OMCR",
the
one polling
period
cell
the
ACs
when
cell
closes
the the
cell DSAR
restriction
restriction
operates
in theis
started
to larger
function.
thisleads
parameter
is
methodwhich
ofIf "Polling".
period
to
update
the
SIB3.
"Open
Cell
Restriction
by
Configuration Rule:
OMCR",
the
cell
opens
The larger
the
value
is, the
the
Function:
parameter
cell
restriction
this
more
ACsThis
are function.
barred
forIfeach
indicates
whether
Cell
parameter
is the
"Open
andis
period when
DSAR
Restriction
operates in the
Close
Cell Restriction
started.
method
of "Polling".
If this
Dynamically
by RNC",
the cell
parameter
set to or
"Polling",
dynamicallyisopens
closes
the
performs
the cell
cell periodically
restriction according
AC
(Access
Class)
restriction.
to the load of uplink.
If
the parameter
is set to "Not
Configuration
Function:
ThisRule:
parameter
Polling",
the
cell
performs
AC
The
parameter
should
indicates the number ofbe set
restriction
according
to
the
Function:
This
parameter
to
0
if
it
is
not
necessary
to
Barred ACThis
in one
polling
Function:
parameter
AC
barred
inAnd
the
indicates
whether
the
bar
thewhen
cell.
itOMCR.
should
be
period
CS
domain
indicates
the
switch
ofDSAR
DSAR
Configuration
Rule:
(Domain
Specific
Access
set to 1ofifSpecific
the operator
need
DSAR
each
PLMN
(Domain
Access
If
is
to
"Notof
Restriction)
of
CS
domain
tothe
barvalue
theincell
manually.
If itofis
operates
the
method
Restriction)
in set
CS
domain
Polling",
specifed
Acs
operates
in
the
method
of If
set toPLMN
2, the of
cellcurrent
will becould
barred
"Polling".
each
cell.
be
bared
to
the
cell.
"Polling".
Ifthe
this
is
according
uplink
Configuration
Rule:
this
parameter
isparameter
set cell
to load.
Otherwise,
all
ACs
are
bared
set
to
"Polling",
the
cell
The
larger
the
value
is,
the
"Close CS Domain DSAR by
periodically.
periodically
performs
more
ACsthe
are
restricted
to
OMCR",
DSAR
is AC
closed
(Access
Class)
restriction
in If
access
the
CSofdomain
when
in
CS domain
the PLMN.
CS
of this
PLMN.
If
DSAR
wasDSAR
itthe
is domain
"Open function
CS
Domain
the
parameter
isDSAR
set mode.
to is"Not
performed
inthe
polling
by
OMCR",
Polling",
the
cell
performs
AC
opened in CS domain of the
restriction
according
to
the
PLMN. If it is "Open and
AC
barred
in the OMCR.
Close
CS Domain
DSAR
ConfigurationbyRule:
Dynamically
RNC", the
If
the value
is set to "Not
DSAR
is dynamically
opened
Polling",
specifed
Acs could
or closed in CS domain
of the
be
bared
to CS domain.
PLMN
according
to CS
Otherwise,
all of
ACs
are bared
domain Load
Iu or
periodically.
accessibility of Iu.
Configuration Rule:
The parameter should be set
to 0 if it is not necessary to
bar the CS domain. And it
should be set to 1 if the
operator need to start DSAR
manually. If it is set to 2, the
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
YES
No
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES

indicates whether the cell
supports Enhanced F-DPCH
or not.
Configuration Rule:
Function:
This
It should be
setparameter
to
indicates
whether
"Supported"
if the the
cell cell
wireless
environment
is
supports Enhanced F-DPCH.
suitalbe for MIMO.
Configuration Rule:
The value is set to 'True' if the
cell wilrelss environment is
suitable
MIMO
Function:for
This
parameter
transmission.
indicates MIMO pilot mode.
Configuration Rule:
It should be set to P+P unless
Function:
This parameter
VAM is supported
by NodeB
supports the MIMO function
or not.
Function:
ThisRule:
parameter
Configuration
indicates
theset
starting
code
It should be
to
index
of SF =128
"Supported"
if the for
cellOCNS.
(OCNS:
Channel
supportsOrthogonal
MIMO.
Noise Source).
Configuration Rule:
This
parameter
defines the
Function:
This
Function:
This parameter
parameter
first OCNS
code
index.
indicates
whether
Paging
and
indicates
the
number
ofThe
the
OCNS
not for
SF128 code
codesshould
reserved
collided
withisthe
existingor
Restriction
restricted
OCNS (OCNS:
Orthogonal
downlink
physical
channels.
permitted
when
the
DSAR
Channel Noise Source).
(Domain
Specific
Access
Configuration Rule:
Restriction)
of the
PLMN
is
The larger the
value
is, the
running.
If
the
switch
is
more
SF128
codes
are
opened,
this
cell
restricts
reserved
as
OCNS
code.
indicates
the
switch
of DSAR
Function:
This
parameter
some
UEs
from
responding
to
(Domain
Specific
Access
indicates
the number
of
paging
message
and
initiating
Restriction)
PS
domain of
Function:
parameter
Barred
ACThis
ininone
polling
the
each
PLMN
of
current
cell.inIf
indicates
whether
the
DSAR
period
when
PS domain
the
CS/PS
domain
when
this
parameter
is set
to
(Domain
Specific
Access
DSAR
of
each PLMN
CS/PS
domain
DSAR
of the
"Close
PS
Domain
DSAR
Restriction)
of
PS
domain
operates
in the method of by
PLMN
is
running.
OMCR",
the
DSAR
is closed
operates
in the
method
of
"Polling".
Configuration
Rule:
in
PS
domain
of
the
PLMN.
"Polling".
If
this
parameter
isIf
Configuration
Rule:
If
the"Open
system
very loaded,
itset
is
PSisDomain
DSAR
to
"Polling",
the
cell
The
larger
the
value
is,
the
the
operatorthe
could
set the
by
OMCR",
DSAR
is to
periodically
performs
AC
more
ACs are
restricted
parameter
to
1
to
reduce
the
opened
in
PS
domain
of
the
(Access
Class)
restriction
in
access
the
PS domain
when
load.
PLMN.
If it function
isof"Open
and If
PS
this PLMN.
the domain
DSAR
was
Close
PS Domain
DSAR
the
parameter
is set
to "Not
performed
in polling
mode.
Dynamically
by RNC",
the AC
Polling", the cell
performs
DSAR
is dynamically
opened
restriction
according to
the
or
ACclosed
barredininPS
thedomain
OMCR.of the
PLMN
according
to PS
Configuration
Rule:
domain
Load
If the value
is of
setIutoor"Not
accessibility
of Iu. Acs could
Polling", specifed
Function:
This
parameter
Configuration
be bared to
PSRule:
domain.
indicates
whether
the
This
parameter
indicates
the
Otherwise, all Acs
are cell
bared
supports
S-CPICH
or
not.
number
of
Barred
AC
in
one
periodically.
Configuration
Rule: PS
polling period when
It
should
be
set
"Support"
domain DSAR oftoeach
PLMNif
the
cell
support
S-CPICH
operates in the method of and
it"Polling".
is necessary to set up the
S-CPICH
Configuration Rule:
The parameter should be set
to 0 if it is not necessary to
bar the PS domain. And it
shoulde be set to 1 if the
operator need to start the
DSAR manually. If it is set to
2, the DSAR will be started
and stopped according the
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
indications. Node B shall stop

and reset timer
T_RLFAILURE upon
receiving
successive
Function of
this parameter: it
N_INSYNC_IND
indicates whetherin-sync
the cell can
indications.
If T_RLFAILURE
active the MIMO
and
expires,
B shall
trigger
downlinkNode
64QAM
at the
same
the RL
procedure
time
in Failure
the radio
link setupand
or
indicate
which radio
link set is
reconfiguration,
.
out-of-sync.
When the RLthe
Failure
procedure
is
throughput of HSDPA.
triggered,
the
state
of the
If the operator turn on
this
radio
link
set
change
to the
the
function, itThis
will increase
Function:
parameter
out-of-sync of
state.
throughput
HSDPA
indicates
whether
STTD must
Configuration
Rule:
.Otherwise
the
throughtput
of
be
activated
when
MIMO is
The
larger
this parameter
is,
HSDPA
is
limited.
activated.
If the
value
set to
the
later the
radio
link is
failure
Supt64QamInd
indicates
the
'Bind',
MIMO
can
be
not
procedure
starts
but
the be
cell
supports
the
64QAM
in
activated
unless STTD was
downlink
interference
downlink.MimoSuptInd
activated
increases.the
The
shorter
thisthe
indicates
cell
supports
Configuration
Rule:
parameter
is, the
less
MIMO
funtion,
but
both
theto
It
should be isset
according
opportunity
for
thetodownlink
two
parameters
set
support
Function:
This
parameter
the
IoT
test
If most of
radio
link
to result.
bethe
synchronized
do
not
means
cell
indicates
whether
VAMcan
is
the
UEs
do
not
require
to
again.
active
the
MIMO
and
64QAM
supported
activate STTD and MIMO at
in the
radio
link.
Configuration
Rule:
the
same
time,
the value
It
should
to Bind'
could
be be
set set
to 'Not
Function:
Cellif Identity.
"Supported"
the cell
Configuration
supports VAM.Rule: CId of
RNC
should
different.
Function:
UEbe
internal
Adjustment
Suggestion:
CId
measurement ID of the RTT
of
different
cells
of
the
same
for UTRAN
RNC
should be
different.
Configuration
Rule:
the ID
should not be collided with
other
UE internal
Function:
UE internal
measurement
measurement ID
ID of the RTT
Adjustment
for RL timingSuggestion:
adjustmentthe
ID
should not be
collided
Configuration
Rule:
the IDwith
other
UE
internal
measurement
ID
Function:
UE internal
other
UE internal
measurement
measurement ID
ID of the UE
uplink
Tx Power
for AMRthe
Adjustment
Suggestion:
dynamic
ID shouldrate
not control
be collided with
Configuration
Rule: the ID
other UE internal
should
not
be
with
measurement collided
ID
Function:
UE internal
other UE internal
measurement
measurement ID
ID of the UE
uplink
Tx Power
for handover
Adjustment
Suggestion:
the
Configuration
Rule:
the IDwith
ID should not be
collided
should
notinternal
be collided with
other UE
other
UE internal
measurement
ID
Function:
UE internal
measurement
measurement ID
ID of the RTT
Adjustment
Suggestion: the
for positioning
ID
should not be
collided
Configuration
Rule:
the IDwith
other
UE
internal
measurement
ID
Function:
UE internal
other
UE internal
measurement
measurement ID
ID of the UE
uplink
Tx Power
for PS the
Adjustment
Suggestion:
service
DRBC
ID should
not be collided with
Configuration
Rule: the ID
other UE internal
should
not
be
with
measurement collided
ID
other UE internal
measurement ID
Adjustment Suggestion: the
ID should not be collided with
other UE internal
measurement ID
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

indicates
2
Function: the
Thisthreshold
parameter
used
for
triggering
event
E, F
indicates the type of
for
SIR
Error
measurement.
dedicated measurement to be
Configuration
Rule:B.
executed by Node
Considering
whether
Configuration Rule: it can
correctly
and
timely
This
parameter
is reflects
Dedicated
measurement
type
the
condition
when
measurement
hysteresis
time
should be choosed SIR
according
cannot
converge
to dedicated
the
/change
time.of the
to the usage
SIRtarget
because
of
Configuration
measurement.Rule: according
deterioration
of radio
to the the measurement
type
condition.
and event of the dedicated
The
less of the absolute
measurement.
value
of the
parameter,
theis,
The larger
this
parameter
Function:
This
parameter
harder
for
event
E
and
F
ofthe
the more how
difficult
to trigger
indicates
filtering
of the
SIRerror
to
report.
But
if
it
event. shall isbe
measurement values
too
small,
when
performed beforeSIR can
converge
to theevent
SIRtarget
measurement
normally, SIRtarget
keeps
evaluation
and reporting.
fixedly
so as influencing
Configuration
Rule:
service
quality
systemeffect
Considering
theorfiltering
capability
finally.
and the timeliness of the
The
more This
of the
absolute
Function:
parameter
measurement
report.
value
of
the
parameter,
indicates
the
function,
The largerThis
the value,
thethe
less
Function:
parameter
more
easily
for
event
E and
purpose
etc.
of
the
dedicated
influence
current
indicates the frequency
of F
of
SIRerror to report.
Buton
if it
measurement
parameters
can have
measurement
report
is
too
large,
when
SIR
can
indicated
by
the
configuration
the final result,
the less
transmitted
by Node
B. the
converge
the
SIRtarget
index.
value, the to
more
influence
Configuration
Rule:
According
normally,
SIRtarget
Configuration
Rule:tokeeps
According
current
measurement
can
to
the contribution
the
rising
so
as
to
influence
to
the
corresponding
have
on
the
final
result.
system load and the function
service
quality
or system
of
the dedicated
timeliness
of the
capability
finally.
measurement.report.
measurement
Function:
parameter
The largerThis
the value,
the
indicates
the time to
unit
of
more contribution
the
measurement
report
system load but
the less
transmitted
Node B.
timely of theby
measurement
Configuration
Rule:
According
report; the smaller the
value,
to
the
measurement
period,
the
less
contribution
to
the
which
is
determined
system
load
but
the
more
indicates the report
according
to measurement
the
Function:
L3
filtering
on the
timely of the
characteristics
ofcontribution
to
the system load
andwhich
the
measurement
results
report.
measurement
results,
timeliness
of
This
value
is
the
experience
can be on demand, periodic
measurement
report.
of
vendors
or many
by triggering
alland
kinds of
operators.
It
can
guarantees
events.
the
filtering results
Configuration
Rule:and
according
reflects
themeasurement
measurementtype
to the the
results
in time.
and event
of the dedicated
Function:
number
of events
If
the value
is bigger,
this
measurement.
required
to be has
configured
measurement
less for
a
certain
of UE
impact
onpurpose
final intrainternal
measurement
frequency
measurement
Related
factor: measurement
results. Otherwise,
if the
purpose
valus is smaller, this
The
paramter setting
is based
measurement
has more
on
how many events will be
impact.
Function:
The
used.That
is tomeasurement
say,
Event
This parameter
is not
quantity
of
the
UE
internal
number
is
defined
by
suggested to be adjusted.
measurement
measurement purpose.
Configuration
Rule:
It should
This parameter
is not
be
set
according
to
the
physical quantity to be
measured.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: RLC mode of the

measurement report
Related factor: accurate of
transmit,
system
Function:and
Amount
of capacity
If
the
value
is
AM
RLC,
RNC
Reporting in Period Report
can
request
UE
for
Criteria.
retransmissionRule:
after Itreceiving
Configuration
needs
the
error SDU
label
(not of
to consider
radio
resource
continuous).
If thethe
value
Uu interface and
useris
UM
RLC,
the
retransmission
Function:
Reporting
Interval
experience.
is
not
required.Signalling
is
in
Period
Report
Criteria.
The
larger
the value
is, the
more
important.
AM
mode
Configuration
Rule:
It
needs
periodic reports will be more,
canconsider
provide
the reliable
to
radio
resource
of
and
it will occupy
more radio
transmission
of interface.
signalling.It
Uu
interface
and
the user is
resource
of Uu
not
to parameter
adjust the is
experience.
Thesuggested
value of this
parameter
The
value
of
this
parameter
smaller, the periodic reports is
smaller,
the and
periodic
reports
will be less,
the response
Function:
Reporting
mode
will
be
more
frequent,
to the changing of the and itfor
UE
internalphysical
measurement
will
occupy
more
radio
measured
quantity is
Configuration
Rule:
It needs
resource
of Uu
interface.
also slower,
and
it will
to
consider
the
radio
resource
The
valuethe
of this
is
influence
userparameter
of
Uu
interface.
larger,
the
periodic
reports
will
experience.
Periodical
reporting
be more sparely,
andwill
the
increase
signaling
responsethe
to UE's
trafficload of
Function:
Theitparameter
Uu
interface,
may
be easy
volume
demand
is also
indicates
whether
the
UE
to
result
in
the
signaling
slower, and it will influence
uplink
Txexperience.
power
should be
congestion.
So periodical
the user
reported
or
not is not to be
reporting
criteria
Function:
Therule:
timeIftothe
trigger
configuration
used,
and
eventmeasurement
reporting
the
UE
internal
measurement
quantity
criteria
is recommended.
Function:
The parameter
report
requires
to
measure
the
indicates whether
the
UEUE
RxConfiguration
It needs
Tx time
power,
the Rule:
parameter
Tx
difference
should
be
to
consider
the
user
should
beorset
to True.
reported
not
experiences
utilization
Otherwise,
it and
should
configuration
rule: If be
theset to
ratio
of
radio
resources.
False.
measurement
The smaller thequantity
time to
requires
measure
the UE
trigger is,tothe
faster the
Rx-Tx time
difference,
Function:
The
thresholdthe
of
system
report
the
parameter
should
beUE
setTx
to
Event
6a and
6b
for
measurement
when
the
True.
Otherwise,
it
should
be
Power
reporting criteria is satisfied,
set
to
False.
Configuration
Rule:
When
the
and the better the user
cell
load
high
and
the
ratio
of
experience is. But if the value
AMR
service
is
high,
the
is too small, it will cause over
Function:
The
threshold
of the
threshold
should
be setreport
to
frequent measurement
Event
6f
and
6g
for
UE
Rx-Tx
value
the Event
6a is
which that
will waste
the radio
time
differnece
easy
to be triggered and
resources.
Configuration
Rule:
When
the
Event
6b isthe
difficult
be
The larger
time to
to
trigger
RL
often
lost
synchronization,
triggered.
is , the slower the system
the
threshold
The
larger
theshould
Event be
6a set to
report
the measurement
the
value
that
the
Event
6f is
is
threshold
is, the more
difficult
when the reporting
criteria
easy
to
be
triggered
and
the
Eventthe
6a could
satisfied,
worsebe
the user
Event
6g is
difficult
to be
triggered.
Function:
UE
internal
experience
is;
triggered.
The
larger the ID
Event 6b
measurement
The
largeris,
the
Event
6f the
threshold
the
easier
Configuration
Rule:
the
ID of
threshold
is,
the
more
difficult
Event 6bUE
could
be triggered.
different
internal
the
Event 6f could
be be
measurement
should
triggered.
unique
The
larger the
Event 6g the
Adjustment
Suggestion:
threshold
is, the
the
ID
of different
UEeasier
internal
Event
6g could
be triggered.
Function:
the function
of UE
measurement
should
be
internal
unique measurement
be set according to the UE
internal measurement
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
YES
Fixed
Yes
YES
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
Yes
N/A
Fixed
No
N/A
Network
Planing&Optimi Yes
zation
N/A
Fixed
N/A
No
CPICH power.
Configuration Rule:
The larger the parameter is,
the smaller the power offset
of S-CPICH relative to the PCPICH is, but the S-CPICH
will bring more interference to
the non-MIMO services, and
takes more available
Function:
The
parameter
downlink Tx
power.
indicates
whether
the Iur
Adjustment
Suggestion:
neighbouring
cell supports
If the CQI of MIMO
UE is
the
MIMO
Precoding could
weightbe
small,
the parameter
set
restriction.
increased to improve the
Configuration
The
MIMO servicesRule:
experience.
parameter
should be of
setnonBut the performance
according
to
the
MIMO
MIMO
services
and
cell
Main
function:
This
parameter
Function:
This
parameter
Precoding
weight
capacity
should
beset
indicates
whether
attach
and
indicates
the
type.
restriction
capability
of thethe
Iur
considered
ascell
well
when
detach
procedures
are
Configuration
Rule:
The
neighbouring
cell.
value is increased.
required
to should
be used
not.
parameter
beorset
The
value
TRUE
means:
Function: Indicate
whether
according
to cell type
in
When
the
UE is switched
off
NodeB
supports
to
network
planning.
or
the SIM card
is unplugged,
dynamically
allocate
HSsend
onechannelization
message of IMSI
PDSCH
code.
detach
to
the
network
side.
Configuration
Rule:
NodeB
Main
function:
This on,
When
the UE isThis
switched
capability
parameter
indicates
theisCS
supposing
that
the UE
Adjustment
Suggestion:
Itstill
domain
DRX
cycle
length
in
the registration
districtif
should
set
to
"Support"
coefficient.
where
ithas
is deactivated,
UEs
NodeB
the capability.
Influence
power and
shall applyfactor:
IMSI attach
consumptive
ofThis
the This
UE;
Main
function:
detach
procedure.
system
cost
because
of PS
too
parameter
indicates
the
The value FALSE
means:
much
paging;
the
rate
of
TMain
function:
This
domain
DRX
UEs shall
not cycle
applylength
IMSI the
UE
response
with
the
paging
parameter
This
parameter
coefficient.
attach and detach procedure
message.
indicates
the
supported
CN
Influence
factor:
power
When the UE is switched
off
The
bigger
the
parameter
domain
of the
consumptive
ofPLMN.
the
UE; is,
or the
SIM
card
is unplugged.
in
the CS
domain,
the
slower
Influence
factor:
set
the
value
system
cost
because
of
too
Influence
factor:
power
the
rate
of
the
UE
responsing
according
theofthe
supported
much
paging;
the
consumptive
therate
UE;of CN
with
the
paging
message
is,
Main
function:
The
network
domain
of
the
PLMN
UE
response
with
the
paging
system
cost
because
of
too
and
the
longer
the
timer
of
operation
mode
is
used
to
message.
much paging.
accesing
the
newtwork
is, is,
indicate
the
The
bigger
the
parameter
choice
0:whether
causing
tooGs
much
which
may
bring
the
user
bad
interface
installed
orslower
not.
in
the from
PS is
domain,
the
pagin
CN.
feeling;
and
this
may
causing
Network
Mode
of
Operation
the
rate1:ofavoiding
the UE responsing
choice
too much I
repeat
paging
from
the CNis,,
indicates
that
Gs
interface
with
thefrom
paging
paging
CN.message
which
may
bring
unnecessary
occurs.
Network
Mode
ofofis
and the
longer The
the timer
Main
function:
T3212
downlink
interface.
However,
Operation
II
indicates
that
accesing
the
newtwork
is, Gs
the timer for periodic location
this
may
save
the
power
interface
does
not
occur.
which
may
bring
the
user
bad
area updating in decihours.
consumptive
of the
UE.
Influence
factor:
the
value
feeling; and
this
may
causing
Influence
factor:
The
network
The
smaller
the
parameter
is,
should
set
the
Newwork
repeat
paging
from
the
CNUE
,
can
get
theby
location
of the
in
the
CS
domain,
the
faster
which
in
time;may
Thebring
timerunnecessary
should be
the
rate
ofinterface.
thethe
UEtimer
responsing
The
network
operation
mode
downlink
However,
smaller
than
of
with
the
paging
message
is,
Ithis
indicates
Gs
interface
may
save
the
power
periodic
position
updates
in
Parameter
function:
the wait
and
the
shorter
the
timer
of
exists.
consumptive
of
the
UE.
CN side;
systemBEARER
cost.
time
for
RADIO
accesing
the
newtwork
is.the
the
network
mode
The
smaller
the
parameter
is,II
If
the
timer
isoperation
bigger
than
RECONFIGURATION
However,
this
may
raise
the
indicates
the
Gs
interface
in
the of
PSperiodic
domain,
the faster
timer
position
COMPLETE
when
power
consumptive
of
the
does
not
exist.
the
rate
of
the
UE
responsing
updates
in
CN
side,
it might
CELL_DCH
to CELL_FACH.
UE.
The
Gs
interface
means
that
with
thethe
paging
message
is,
cause
CN
paging
failure
Parameter
controlling
factor:
there
is
a
LA/RA
combined
and
the
shorter
the
timer
of
or
KPI
drop.
the
round-trip
time
delay
update.
LA/RA
combined
accesing
theisand
newtwork
If
ther timer
too
small,is.itthe
between
UE
UTRAN,
update:
when
the
UE
with
a
However,
this
the
may
cause
too
much
location
success
rate
ofmay
theraise
RRC
CS
connection
trigger
power
consumptive
of theand
area
updating
messagen
status
transferring.
attaching
totoo
themuch
SGSN,
the
UE.
may
cause
system
The
larger value means
the
SGSN
cost.
longer
waiting
time
and
the
will
the should
ROUTE
Thetrigger
paramter
higher
success
rate of the
UPDATE
procedure.
reference
with
CN side and
RRC status transferring,
but it
should
be smaller
thantime
the
may cause
the longer
timer
delay.of periodic position
updates
in CN
side.
The smaller
value
means the
shorter waiting time and the
shorter time delay, but it may
cause lower success rate of
the RRC status transferring.

Main
function:
This
parameter
defines
the time
period
the
indicates
the
encryption
UE has to wait before
algorithm that
the RNC
repeating
the accessing
supports.
request procedure after UE
Influence
factor:
The needing
receives RRC
CONNECTION
of
the
operator
with
REJECT.
encryption.
Influence factor: the process
UEA0:
no encryption;
time of means
one congestion
UEA1: menas
encryption
with
control;
the time
of the user
algorithm
UEA2: the
menas
can wait to1.access
encryption
with algorithm
2.
UTRAN; system
cost.
The
paramter
should
reference
CN side.
the longer with
the timer
of the
user waiting to access the
UTRAN is.
Primary
key the
can parameter
not be
The smaller
is,
modified.
is
the shorterThe
theparameter
timer of the
must
be Network
planned,
user waiting
to access
the
and
is
unique
in
a
RNC.
UTRAN is, howerer,
the
system cost may be more
higher.
This parameter shourd be
reserved
parameter
larger than
the process time
of one congestion control.
Network
Planing&Optimi Yes
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Don't Care
No
N/A
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter

indicates if RNC supports fast
reconfiguration function.
Don't Care
No
N/A
Fixed
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Influence factor:
reserved
parameter
If the function
is turn on, it
may lower the timer of
reconfiguraiton procedure,
and reduce the interruption
timer of reconfiguraiton
procedure, that may bring the
user better feeling. However,
the function may consumpt
The
is
morereserved
downlinkparameter
scrame code.
used
config is
"board
user
If hte to
function
turn off,
it
admission
control
of
may raise the
timerperiod
of
validity"
in
this
version.
reconfiguraiton procedure,
Maxinum
is 255 min,
and raise value
the interruption
and
value is 1 min.
timermininum
of reconfiguraiton
procedure, that may bring the
user worse feeling.
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
reserved parameter
Parameter
Function: This
HSUPA adaptive transmission
algorithm.
to
consider
whether need to
reserved
parameter
The reserved
parameter
is
configure
HARQ
power offset
used toon
config
"board user
user
based
the E-DCH
admission
control
method" in
number
and
reconfigure
this version.
Value
0 is
HSUPA
OLPC
prameters
respond
RRC user
CONNECTION
when E-DCH
number
REJECT
change. when user num
exceed
upper
in valid
If
algorithm
1 islimit
used
period; value is
1 0),
is discard
(GResPara3
only
RRC CONNECTION
HSUPA
OLPC parameters is
REQUESTchanged according
adaptively
reserved
parameter
to the E-DCH
user number in
the cell. But HSUPA OLPC
parameters can be
reconfigured according to the
E-DCH user number. The
defect is HARQ power offset
can not be configured
according to the E-DCH user
number.
The
reserved
parameter
is
If algorithm
2 is
used
used
to configis"RNC
(GResPara3
not 0),PS
HSUPA
0kbps
indicator"
in
OLPC support
parameters
and HARQ
this
version.
power offset is configured
according to the E-DCH user
number
in the parameter
cell when is
The reserved
service
after
used
to setup.
config But
"BER
target
service setup,
the HSUPA
adjustment
switch"
in this
OLPC parameters and HARQ
version.
power offset cannot be
The
reserved parameter is
reconfigured.
used
to config
"board user
Adjustment
Suggestion:
admission
control
threshold"
When HARQ
power
offset is
in
thistoversion.
Value range is
need
be configured
0
to 65535to the E-DCH user
according
number like HSUPA OLPC
parameters, algorothm 2 can
be
used. parameter
reserved
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Network
Planing&Optimi No
zation
N/A
Primary key can not be

modified
Network
Planing&Optimi No
zation
N/A
Primary Key can not be

modified
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
YES
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Primary Key can not be

modified
supports the CPC function or
not.
Configuration rule: According
to whether the operator has
purchased the CPC license
for the cell.
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Don't Care
No
N/A
reserved parameter
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
The "Ura" MO isn't existed in

current OMCR. This
Main
function:
parameter
Main
function:isThis
This
parameter
configuration
export
from
indicates
the
time
gap
indicates
the
maximum
UtranCell and
between
time of
number
ofcurrent
retransmissions
externalUtranCell
MO by of
sending
the
RRC
the
RRC
CONNECTION
"Ura"
field.
CONNECTION
SETUP
andin
SETUP.
The "Ura" MO isn't
existed
the
retransmissions
Influence
factor:This
Thetime.
current
OMCR.
Influence
factor:
The from
probability
of UE
receiving
configuration
is export
probability
of
UE
receiving
RRC
CONNECTION
SETUP;
UtranCell
and
RRC
CONNECTION
the
number
of RRC
externalUtranCell
MO.SETUP;
the
of RRC
Thenumber
"Ura" MO
isn't
existed in
CONNECTION
SETUP
CONNECTION
SETUP
current OMCR.
This
message;
system
cost.
message;
cost.fromis,
configuration
export
The
biggersystem
theisparameter
The
smaller
the
parameter
UtranCell
and
the
bigger
the
number
of is,
the
bigger
the
number
of
externalUtranCell
MOSETUP
by
RRC
CONNECTION
Main
function:
This
parameter
RRC
CONNECTION
SETUP
"CId"
or
"PhyCId"
field.
message is and the higher
indicates
the
Node
Bhigher
number,
message
is cost
and
theHowerver,
the
system
is,
which
is valid
inofRNC.
the
cost
is,UE
Howerver,
Thesystem
probability
Influence
factor:ofthe
The
probability
UEvalue
receiving
RRC
should
set
by
the
Newwork
receiving
RRC
CONNECTION SETUP and
CONNECTION
SETUP
can
the rate of setting
the RRC
be
increased.
CONNECTION succeessfully
The
bigger
the Main function:
can be
increased.
This
parameter
the
The smaller
the indicates
parameter
is,
Main
function:
parameter
time
gap
between
current
the smaller
theThis
number
of
indicates
the time
of IU
time
sending
thedelay
RRC
RRCof
CONNECTION
SETUP
Release
Resource.
CONNECTION
SETUP
and
message is and the lower the
Influence
factor:
thetime.
time gap
the
retransmissions
system
cost
is, Howerver,
between
the
RNC
receives
Influence
factor:ofThe
The probability
UE
DIRECT
probability
of UE receiving
receivingTRANSFER
RRC
message
from CN
and
IU
RRC
CONNECTION
SETUP;
CONNECTION
SETUP
and
RELEASE
COMMAND.
the
number
of
RRC
the rate of setting the RRC
The
smaller the SETUP
parameter is,
CONNECTION
CONNECTION
succeessfully
the
faster
the
RNC
release IU
message;
system
can be decreased.cost.
resource,
which
may
causeis,
The
If thesmaller
numberthe
of parameter
the RNC
the
Location
Area
Update
the
bigger
number of
resent
the the
RRC
procedure
failedSETUP
in theSETUP
UE,
RRC
CONNECTION
CONNECTION
and
also
may
cause
the
RNC
message
is
and
the
higher
message is equl to
can't
paging
the
UE.
the
system
cost
is,
Howerver,
congfigured
based
on
RrcSetupRetraNum and the
The
the
parameter
The
probability
of UE
network
authorised
area
RNCbigger
hasn't
receive
RRC is,
the
slower
the
RNC
release
receiving
RRC SETUP
CONNECTION
IU
resource,
which
may
CONNECTION
COMPLETE, theSETUP
RNC and
decrease
the
utilization
ratio
the
rate ofthe
setting
the RRC
consider
RRC
of
IU
resource.
CONNECTION
succeessfully
CONNECTION
SETUP
congfigured
based
on
can
be increased.
procedure
failed. area
network
authorised
the smaller the number of
RRC CONNECTION SETUP
message is and the lower the
system cost is, Howerver,
The probability of UE
receiving RRC
CONNECTION SETUP and
the rate of setting the RRC
CONNECTION succeessfully
can be decreased.
Network
Planing&Optimi Yes
zation
N/A
congfigured based on
network authorised area
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
RncId must be in NeId[] in

record which ANI =0 in MO
NeInfo
Network
Planing&Optimi Yes
zation
N/A
Mobile Country Code
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
indicates the eNodeB type of
the EUTRAN belongs to.
should set by the Network
ENodeBType
0:
Main function:include:
This parameter
macro
eNodeB;
1:
home
indicates the eNodeB identify
eNodeB
indicator of the EUTRAN
belongs to.

indicates the TRACE AREA
identify indicator of the
EUTRAN belongs to.
Main
function: This parameter
indicates
the adjacent
Main
function:
This parameter
eNodeB
indicatesidentify
the timeindicator.
of Waiting
Influence
the value
for RADIOfactor:
LINK RESTORE
should
set by the
Network
INDICATION..
Main function:
This
parameter
Influence
factor:
cost
time
of
Main function:
Thisofparameter
indicates
the time
the
RNC
obtaining
physical
layer
indicates
adjacent
waiting
forthe
CELL
UPDATE
synchronisation,
the feeling
of
eNodeB
indicator.
messageidentify
after sending
Radio
user,
wait
time
to
ReInfluence
factor:
the
value
Link Deactivation command
establishment
theNetwork
service.
should
set by the
to
NODEB/DRNC.
The
smaller
the parameter
is,
Influence
factor:
cost time of
the
probability
of
obtaining physical layer Outsynchronisation
failure
and
of-Sync, the feeling
of user,
the
probability
of
call
drop
wait time to Re-establishment
may
be increased.
the service.
The smaller
bigger the
The
theparameter
parameteris,
is,
the
the probability
probability of
of receiving the
synchronisation
suceess
CELL UPDATE may
be may
be
increased;
howerver,
when
decreased, and the
the
radio
environment
is
bad,
probability of call drop may
the
RNC
may
waist
too
long
be increased.
time
to unnecessary
wait and
The bigger
the parameter
is,
increase
the
wait
time
Primary
key can
beto Rethe probability
of not
receiving
the
establishment
the
service,
modified.
The parameter
CELL UPDATE
may
be is
and
influece
the feeling
of
must
be Network
planned,
increased;
howerver,
when
user.
and
is
unique
in
a
ENodeB
the radio environment is bad,
the RNC may waist too long
time to unnecessary wait and
The parameter
musttobe
increase
the waitistime
ReNetwork
planned,
and
is
establishment the service,
unique
in a ENodeB
and influece
the feeling of
user.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
CID must exist in utranCell
Network
Planing&Optimi No
zation
N/A
The parameter wasn't be

used by RNC.
Network
Planing&Optimi No
zation
N/A
The parameter wasn't be

used by RNC.
Network
Planing&Optimi No
zation
N/A
Network Sharing
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

congfigured
indicates thebased
time ofonWaiting
network
authorised
area
for RADIO LINK RESTORE
INDICATION..
Influence
factor:
time
of
indicates the
timecost
of the
RNC
obtaining
physical
layer
waiting for CELL UPDATE
synchronisation,
theonfeeling
of
congfigured
based
message after
sending
Radio
user,
wait
time
to
Renetwork
authorised
area
Link Deactivation command
establishment
the service.
to
NODEB/DRNC.
Main
function:
parameter
The
smaller
theThis
parameter
is,
Influence
factor:
costtime
timefor
of
indicates
the
waiting
the
probability
of
obtaining
physical
layer OutACTIVE
SET
UPDATE
Main
function:
This
parameter
synchronisation
failure
and
of-Sync,
the
feeling
of user,
COMPLETE.
indicates
the
time
of
the
RNC
the
probability
of
call
drop
wait
time to
Re-establishment
Influence
factor:
cost time of
waiting
for
RB
may
be
increased.
the service.
obtaining
layer is,
The smaller
biggerphysical
the
The
theparameter
parameter
is,
synchronisation
B,
the feeling
se
Response
over
Uu
the
probability
of
the
probability
of
receiving
the
of
user, wait timesuceess
to Re- may
Interface.
synchronisation
CELL
UPDATEthe
may
be
establishment
call.
Influence
factor:
cost
time
of
be
increased;
howerver,
when
decreased,
and
the
The
smaller
the
parameter
is,
transmission
the
RB
the
radio
environment
is
bad,
probability
of call
drop maythe
the
probability
of
receiving
the
RNC may waist too long
be increased.
ACTIVE
SETtoUPDATE
se
message
UE, parameter
handling
time
to
unnecessary
wait and
Main
function:
This
The
bigger
the
parameter
is,
COMPLETE
may
be to
time
of
UE,
the
feeling
of Reincrease
the
wait
time
indicates
the
waiting
time
for
the
probability
of
receiving
the
decreases,
andthe
the
user,
wait
time
tomay
Reestablishment
service,
RRC
CONNECTION
SETUP
CELL
UPDATE
be
probability
of the
call
drop
may
establishment
thefeeling
call.when
and
influece
of
COMPLETE.
increased;
howerver,
be
increased.
The
smaller
the
parameter
is,
user.
Influence
factor:
The
the
environment
is bad,
Theradio
bigger
the of
parameter
is,
the
probability
receiving
the
probability
of
UE
receiving
the
RNC
may
waist
too
long
the
probability of receiving the
RB
RRC
CONNECTION
SETUP;
time
to
unnecessary
wait
and
ACTIVE
SET UPDATE
handling
time
of
UE,
the
increase
the
wait
time
to
ReCOMPLETE
may
be
se
Response
may
be
feeling
of user.
establishment
the service,
increased;
howerver,
when
decreases,
and
the
The
smaller
the
is,
and
influece
the parameter
feelingisofbad,
the
radio
environment
probability
of call
drop maythe
the
probability
of receiving
user.
the
RNC
may
waist
too
long
be
increased.
RRC
CONNECTION
SETUP
time
to
unnecessary
wait
and
The
bigger
the be
parameter
is,
response
may
decreases,
increase
the
wait
time
to
Rethe
probability
of
receiving
and
the
rate ofthe
setting
RRCthe
Main
function:
This
parameter
establishment
service,
RB
CONNECTION
indicates
whether
applymay
fastbe
and
influece
thefailure
feeling
of
increased.
Parameter
function:
the
reconfiguration
function
when
user.
se
Response
may
be
The
biggertime
the
is,
maximum
for
HS
service
cell parameter
waswaiting
changed.
increased;
howerver,
whenthe
the
probability
of
receiving
SRNS
CONTEXT
REQUEST
Influence
factor: the is bad,
the
radio
environment
RRC
CONNECTION
SETUP
at
the
source
RNC during
capability
of NODEB.
the
RNC may
waist
too long
Response
may
be
increased;
relocation
of
SRNS.
The
parameter
is set wait
to 'On'
time
to unnecessary
andif
Parameter
function:
the
howerver,
when
the radio
Parameter
controlling
factor:
the
NODEB
support
changing
increase
the
wait
to Remaximum
time
fortime
waiting
environment
is bad,
the
IU
port interfacing
serving
HS-DSCH
RL
byRNC
fast
establishment
the
service,
SRNS
DATA
FORWARD
may
waist
too
long
time
to
parametereter.
reconfiguration;
otherwise,
and
influece
the
feeling
of
COMMAND
at
the
source
unnecessary
wait
and
The
larger parameter
the
parameter
is
set
tovalue
'Off'.
user.
RNC
during
relocation
of
increase
thelonger
time to
re-enter
means
the
resource
SRNS.
the newwork,
influece the
suspension
in and
the SRNC.
Parameter
controlling
factor:
feeling
of the
user. the
The
smaller
parameter
value
Parameter
function:
IU
port
interfacing
means thetime
shorter
resource
maximum
for waiting
IU
parametereter.
suspensionCOMMAND
in the SRNC.But
RELEASE
at the
The
parameter
valueis
ifsource
thelarger
parametereter
value
RNC
during relocation
means
the
longer
resource
too
small,
the
CN
may
not
of SRNS.
suspension
inCONTEXT
the SRNC.
finish SRNScontrolling
Parameter
factor:
The
smaller
parameter value
REQUEST.
IU
port
interfacing
means
the
shorter
resource
parametereter.
suspension
in
the
SRNC.But
The larger parameter value
ifmeans
the parametereter
value is
the longer resource
too small, the
not
suspension
in CN
the may
SRNC.
finish
SRNS parameter
DATA
The smaller
value
FORWARD
COMMAND.
means the shorter
resource
suspension in the SRNC.But
if the parametereter value is
too small, the CN may not
finish relocation.
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
FAILURE message number in

Uu interface.
means the shorter time delay
for RNC resending
measurement control release,
it helps to let UE receive
measurement control release
Parameter
Function:
message sooner
andThis
release
parameter
indicates the
specified measurement
mothod
of PLMN
sooner, but
it mayselection
increase ,
when
MOCN is used for
the MEASUREMENT
network
sharing
CONTROL
FAILURE
Factors
of
consideration:
message number
in Uu
when
MOCN
is usedThe
for
interface.
Parameter
function:
network
sharing,
if
PS
and
The
larger
parameter
value
parameter indicates signal
CS
domain
registration
means
the
time config
delay
service
typelonger
that need
coordination
is implentment
for RNC
resending
CFN
offset
value.
by
CN,service
this parameter
is set
measurement
control
release,
signal
type
include:
Parameter
function:
The
1;
otherwise,
this
parameter
itParameter
helps
to decrease
3.4k,
13.6k,
27.2k the
indicates
whether
is
setlarger
0
MEASUREMENT
CONTROL
The
the
of issignal
the CFN offset rate
value
FAILURE
number
is, the smaller
CFN
offsetin
applied
to message
fast the
reconfiguration
Uu
interface,
but
it
may
let
value
is.
scene.
Parameter
function:
The
UE
receive
measurement
The
smaller
the
rate
of
signal
If
the parameter
is set
to data
parameter
indicates
that
control
release
message
too
is,
the bigger
the
CFN
offset
TRUE,
the
CFN
offset
value
retransmission
rate
factor
late
and
release
specified
value
is.
of
fast reconfiguration
scene
corresponding
CFN
offset
measurement
too
late.
is set by
OMCR.
value
over
Uu interface.
If
the parameter
is set factor:
to
Parameter
controlling
Parameter
function:
Thevalue
FALSE,
the
CFN
offset
retransmission
condition
of
parameter
indicates
that
of
fast Uu
reconfiguration
scene
actual
interface.
packet
region
is
setlarger
bylength
RNC.
The
the paramter
is,
corresponding
CFN offset
the bigger
offset
value
over the
Uu CFN
interface.
value
is. controlling factor:
Parameter
Parameter
function:
The is,
The
smaller
the paramter
CFN
offset indicates
value
parameter
CFN
the
smaller
theCFN
CFNoffset
offset
The
larger
the
offset
value.
value
is.
value
is, thecontrolling
longer thefactor:
Parameter
packet length
length region
over Uu
packet
interface
is. CFN offset
corresponding
The
theinterface.
CFN offset
valuesmaller
over Uu
value
is,
the
shorter
the
The larger the CFN offset
packet
length
over
Uu
value is, the longer the
interface
is.thisover
function
of
parameter:
packet length
Uu
Configure
NRI Bit length of
interface is.
CS
TheNode
smaller the CFN offset
Factors
consideration:
value is,of
the
shorter the this
parameter
need
to Uu
be
packet length over
negotiated
with
CN,
and only
interfaceof
is.this parameter:
function
configured
when
NE
typeofis
Configure NRI Bit length
MSCSERVER.
PS Node
Factors of consideration: this
negotiated
with parameter:
CN, and only
function of this
configured
when
NE
Configure null-NRI
oftype
CS is
SGSN.
Domain
negotiated
with parameter:
CN, and
function of this
configured
according
Configure null-NRI of to
PSthe
CS.
Domain
negotiated with CN, and
configured according to the
CS.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
planner
to the
Function:according
UE detected
set
network
condition.
configuration index for Cpich
In
order to facilitate
RSCP
maintenance
the
Configuration and
Rule:
It version
is
upgrade,
the
criterion
configured by networkis
suggested
as follows:
planner
according
to the
Function:
UE intra-frequency
network condition.
(TrfCatIntraMIdx+1)*1000+X*
event
report
configuration
In order
to facilitate
100+Y*10+Z
index
for Cpich
EcNo
maintenance
and
the version
-X
value
range:
(0, It1),
Configuration
Rule:
is
upgrade, the criterion
is
measurment
quantity
is
configured
by
network
suggested as follows: Cpich
EcNo,
Xaccording
isUE
0; measurment
planner
to the
Function:
intra-frequency
quantity
is
Cpich
RSCP,
X is 1
network
condition.
-Y
value
range:
(0..9),
For
In
order
to
facilitate
100+Y*10+Z
index
for Cpich RSCP
EvtMeasEcNo/EvtMeasRSCP
maintenance
and
the
version
-X value range:
(0,
Configuration
Rule:
It1),
is
,configured
Y
is
0;
for
upgrade,
the
criterion
is Cpich
measurment
byquantity
networkis
EvtMeasDctEcNo/EvtMeasDc
suggested
as
follows:
EcNo, Xaccording
is 0; measurment
planner
to the
tRSCP,
isCpich
1; other
value
quantity
RSCP,
X is
is 1
networkYis
condition.
used
for
future
extension.
-Yorder
valuetorange:
(0..9), For
In
facilitate
-Z value range:
100+Y*10+Z
maintenance
and(0..9),
the version
Corresponds
the
different
-X
value
range:
(0,
1),is
, Y is 0; for
upgrade,
the criterion
service
type
measurment
quantity
suggested
as follows: is Cpich
separately(TrfCategory).
EcNo,
XYisis0;1;measurment
tRSCP,
other value is
quantity
is
Cpich
RSCP, X is 1
used
for
future
extension.
(TrfCatInterMIdx+1)*1000+X*
-Y
value range:
range: (0..9),
(0..9), For
-Z value
100+Y*10+Z
Corresponds
the (0,
different
-X value range:
1),
,measurment
Y is 0; type
for quantity is Cpich
service
EcNo,
X is 0; measurment
tRSCP,
YisisCpich
1; other
value is
quantity
RSCP,
Function:
HSDPA
and X is 1
used
for
future
extension.
-Y value
range:
(0..9),
For
Invalid,
notrange:
support
period
compressed
mode
can
be
-Z value
(0..9),
measurement
actived
simultaneously
or not
Corresponds
different
,Configuration
Y is 0; for the
Rule: cell
service
type
capability,
UE capability,
tRSCP,
Y is 1; other value is
performance
used
for of
future
extension.
The value
'Serial
'means
Invalid,
notrange:
support
period
-Z
value
(0..9),
that compressed mode and
measurement
Corresponds
thebe
different
HSDPA can
not
actived
Function:
HSUPA
and
service
type
simultaneously.
HS-DSCH
compressed
mode
can
be
needs
fall back to DCH
activedtosimultaneously
or not
before
the initiation
Configuration
Rule: of
cell
compressed
mode,
which will
capability, UE capability,
infulence
throughputHSDPA throughput.
The value
value of
of 'Serial
'Parallel
'means
The
'means
Function:
interval
between
that
compressed
mode
and
that
compressed
mode
and
hspa
service
cell
change.The
HSDPA
can
be
actived
HSUPA
can
not
be
actived
paramter
is used to avoid
simultaneously.
simultaneously.
EDCHcell
needs
ping-pong
HS
service
Adjustment
Suggestion:
to
fall
back
to
DCH
before
the
change.
HSDPA
and
compressed
initiation
ofReport
compressed
Function:
amount
Configuration
Rule:
the
risk
of
mode
activation
relied
mode,
which
willare
infulence
after
event
triggered
in softon
ping
pong
handover,
Nodeb
capability,
ZTE
HSUPA
throughput.
HO
throughput
support
parallel
procedure,
so
The
value
of
'Parallel
'means
Related
factor:
HO success
The
value
is higher,
HSPA
this
parameter
will
not
be
that
compressed
mode
and
rate
serving
cell change
is slower,
adjusted.
HSUPA
can
be actived
In
order
to avoid
missing
which
may
impact
the
simultaneously.
1a/1b/1c/1j
lead
throughout, event
on thewhich
contrary,
Function:
Report
interval
to
failure,
events
thehandover
value is
smaller,
hs after
event
triggered
soft
HO
are
repeated
to in
report
after
serving
cell change
is faster,
Related
factor:
HO
success
they
are
triggered.
If
the
which may lead to ping-pong
rate
events'
reportscell
arechange.
more, the
HSPA serving
If
this parameter
events
are harderistobigger,
be
events
slower,
missed are
andreported
HO success
rate
possibility
of call-drop
increase, but
system
increases,
HO success
resource isand
consumed
more.
rate
falls down.
Otherwise,
Otherwise,
the events'
reports
this
paramter
smaller,
are less,
then is
HO
success
events
aredecrease.
reported
rate may
frequently and HO success
rate increases, but more
system resources are taken
up.
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: L3 filtering on the

measurement results
This value is the experience
Function:
used toand
delay event
of many vendors
reporting,
average
operators.decrease
It can guarantees
HO
times and
avoidand
error HO.
the filtering
results
Function:
index
of
intraRelated
factor:
average
HO
reflects the measurement
frequency
measurement
times,
HO
success
rate,
UE
results in time.
parameters
moving
speed
and HO
area.
If the value
is bigger,
this
Configuration
It is is,
The
bigger thisRule:
parameter
measurement
has
less
configured
by
network
the
lesson
possibility
is to trigger
impact
final intraplanner
according
to the
this
event.
Consequently,
frequency
measurement
network
condition.
average
HO times decrease
results. Otherwise,
if the
In
order
to
facilitate
and
the
risk
of call-drop
valus is smaller,
this
maintenance
and
the
version
increase.
On the
side,
measurement
hasother
more
upgrade,
the
criterion
when
this parameter is
impact.
suggested
as follows:
becomes
smaller,
the more
This parameter
is not
possibility
is
this
suggested totobetrigger
adjusted.
event, average HO times
100+Y*10+Z
increase and may result in
-X value
range: (0,and
1),
error
HO. purpose
Function:
measurment
quantity
is Cpich
Suggestion:
for the scenario
functions
of intra-frequency
EcNo,
X
is
0;
measurment
that
HO
area
is
small
measurement index or UE
quantity
is Cpich
RSCP, X is 1
moves
fast,
this parameter
Each intra-frequency
-Y value
(0..9),
should
be range:
set small;
andFor
measurement
index
has
avice
versa. note. If different
function
,Function:
Y is 0; For
usedthe
to same
indicate
indexes
have
EvtMeasEcNo2/EvtMeasRSC
measurement
eventthe same
function, they have
P2,
Y is 1;
other
values
are
Related
factor:
3GPP
note.Any
new
added
index
Function:
number
of
events
used
for
future
extension.
definition
should have a function note.
required
torange:
be configured
-Z value
(0..9), for
This
parameter
indicates
a
certain
purpose
of intraCorresponds
the
different
intra-frequency events
frequency
measurement
service
type
defined in protocol. One array
Related
factor: measurement
bit
corresponds
to one event.
purpose
Function:
measurement
The paramter
setting is based
quantity
of theevents
intra-frequency
on how many
will be
measurement
used in inra-frequency
Related
factor: is
measurement
handover.That
to say,
accuracy
Event number
defined by
Function:
reportis amounts
in
Taking
account
of Cpich
measurement
purpose.
periodical
reporting
EcNo
being
more
This
parameter
is precise
not
Related
factor:
HO
success
than
Cpich
RSCP
for intrasuggested
to
be
adjusted.
rate
frequency
handover
The
parameter
is bigger, the
evaluation
to intra-is more
result is HOdue
judgment
frequency
interference,
Cpich
precise
and
HO success
rate
Function:
Report
interval
in
EcNo
is
suggested
using
for
increase,
but
system
periodical
reporting
intra-frequency
in
general.
resource
is consumed
Related factor:
HO success
Function:
to control
radio
more.Otherwise,
The
rate
links
replace
parameter
is smaller,
the
If
this parameter
is bigger,
Related
factor: Proper
macro
events'
reports
are
less,
theof
report
is slower,
possibility
gain,
soft
HO
times
risk
of
call
drop
increase
and
call-drop
increases,
and HO
For
the
maximum
number
of
then
HO
success
rate
may
success
rate
falls down.
radio
links
in
DCH
active
set
decrease.
Otherwise,
this paramter
is
Function:
report
rules
the
is 3, the parameter
forof1C
smaller,
report
is
frequent
intra-frequency
measurement
event is configured
to the and
HO
success
rate
increases,
Related
factor:
system
maximum number. In this
but
more
system
resources
capacity
case,
radio
link replace
is
are
taken
up.
Event
Reporting
Criteria:
UE
triggered only when the radio
reports
the measurement
links in active
set reaches to
result
directly after
detecting
the maximum
number,
signal
change,
which
enhancing
macro
gaincan
and
respond
signalHO
change
reducing the
average
times.
quickly
, and
result inisfew
Currently,
thisonly
parameter
signalling
to
reduce
invalid for event 1J. system
load.
This parameter is not
Periodical
Criteria:
suggested Reporting
to be adjusted.
can respond the signal
change quickly, but consume
more system resource.
This parameter is not
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
YES
No
Network
Planing&Optimi No
zation
Fixed
N/A
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
Yes
addition and deletion.

gain
Related factor: soft HO area,
When
UEand
detects
that
soft
HOthe
ratio
soft HO
one
cell in
the monitoring set
success
rate.
satisfies
thesmaller
threshold
(1)1A, The
thisof
event
1a,
it
first
judges
parameter is, the less
whether
thetonumber
of the
probability
trigger this
cells
in
the
current
active
event. Consequently, soft set
HO
is notbecomes
bigger than
the value
area
smaller
and
indicated
by
this
parameter.
If
Function:
used
delay
event
user is easier
totohave
callso,
event
1a
is
triggered.
If
reporting,
decrease
average
drop.On the
other side,
the
not,
event
is not is, the
HO
times
bigger
this 1a
parameter
triggered.For
the
maximum
Related
factor:
average
HO
more probability
to
trigger
this
number
of
radio
links
in
DCH
times,
HO
success
rate
event.Consequently, soft HO
active
set
3, this
paramter
For
1E,
theisbigger
this
area
becomes
larger
and soft
configuration
should
be
parameter
is,
the
harder
is to
HO
ratio
increases.In
this
Function: used to delay
event
match
with
the maximum
trigger
thisconsumption
event;
otherwise,
case, the
of
reporting,
decrease
average
number
ofand
radio
links
in DCH
the
smaller
thisavoid
parameter
is,
system
capacity
anderror
soft
HO
HO
times
HO.
active
set.(one
smaller
than
the
easier
is
to
trigger
this
success factor:
rate incease.
Related
average HO
the
maximum
number
event.
(2)1B,
Thesuccess
smaller
thisof UE
times,
HO
rate,
radio
links
in
DCH
active
set)
For
1F,
the
bigger
this
parameter
is,
the
higher
moving speed and HO area.
This
parameter
is
not
parameter
is,
the
easier
is
to
probability
to
trigger
this
The bigger this parameter is,
suggested
to
betrigger
adjusted.
trigger
thiseasier
event;
otherwise,
event
and
to
trigger
the
longer
is
to
the
the
smaller
this parameter
Function:
weight
when
ping-pong
HO.On
the average
otheris,
event.
Consequently,
the
harder
is
to
trigger
eveluating
cell's
quality
side,times
the bigger
this andthis
HO
decrease
the
event.
Related
factor:
cell's
parameter
is, theincrease.
lessquality,
risk
of call-drop
On
When
event
eaiserthis
to be
HO
success
rate
probability
tois
trigger
the other
side,
when
this
triggered,
HO
times
1A
and 1B:average
When UE
event.Consequently,
useless
parameter
becomes
smaller,
and
rate
evaluates
quality,
linksHO
aresuccess
insignal
active
set
to if the
average
HO
times
increase
increase,
but
system
parameter
is smaller,
consume
system
and
may result
in resourses
errorthe
HO.
resources
will
consumed
influence
of
best
cell
is bigger
and capacity.forbethe
Suggestion:
scenario
more.
and
that area
of other
cells or
are
that HO
is small
UE
smaller.
As
a
result,
HO
moves
fast,
this
parameter
Fucntion:
CS increase.
Handover for
success
rate
should
be
set
small; and vice
CS+PS
in
Multi-Carrier
Otherwise,
if
the
versa.
Define identity forparameter
each cell is
Scenario
bigger, network
the influence
of best
during
planning.This
Related
factor:and
call-drop
cell
isunique
smaller
that
ofrate
Id
is
for
each
cell
in
For
multi-RAB
CS+PS,
when
other
cells
are bigger, then
every
RNC.
PS
is HO
released
and only R99
error
may
occur.
Function:
index
of cell
intraCS remains,
if the
is
frequency
measurement
R5+R6+R99/R5+R99 and
parameters
only "HS PS preferred" is
Configuration
It isbe
configured, UERule:
will not
configured
by
network
balanced to another cell
planner
according
the
which support
R99to
service
network
condition.
and
is configured
not-only
Define
identity
for as
each
cell
In
order
to facilitate
"HS
PSnetwork
preferred"
when the
during
planning.This
maintenance
and
the
version
parameter
value
is "closed".
Id
is unique
for
each
cell
in
upgrade,
the
criterion
iscan
Otherwise,
CS
service
be
every
RNC.
suggested
as follows:
balanced, but
this may impact
call-drop rate
100+Y*10+Z
-X value range: (0, 1),
Parameter
function:
the
measurment
quantity
isbe
Cpich
The
parameter
should
set
maximum
number
of
RESET
EcNo,
X
is
0;
measurment
based
on
the
actual
network
RESOURCE
re-transmit.
quantity
is Cpich
RSCP,
X is 1
requirement.If
"Close
Load
Parameter
controlling
factor:
-Y value is
range:
(0..9),
For is
Balance"
selected,
there
IU
port interfacing
no
load sharing among
parametereter.
,carriers.
Y is 0; For
If "Open
Loadvalue
The
larger
parameter
Balance"is
selected,
is
means
RNCvalues
shallthere
more
P2,
Ysharing
isthat
1; other
are
load
among
carriers.
repeat
the future
entire Reset
used for
extension.
Resource
procedure
when
-Z value range: (0..9),
RNC
doesn't
receives
RESET
Corresponds the different
RESOURCE
service type
ACKNOWLEDGE
message .
means that RNC shall less
repeat the entire Reset
Resource procedure when
RNC doesn't receives RESET
RESOURCE
ACKNOWLEDGE message
Fixed
Yes
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
Yes
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Fixed-keep
monitoring
N/A
No
Parameter function: the

maximum number of RESET
re-transmit.
The
function
of this
IU port
interfacing
parameter:
This
parametereter. paratmeter is
configured
with the Possible
The larger parameter
value
Secondary
Cellmore
ID for
means that Serving
RNC shall
DC
cell;the
This
parameter
is
Parameter
function:
the timer
repeat
entire
Reset
invalid
for
non-DC
cell
for
CN Restore.
procedure
when RNC doesn't
The
involved
factor forfactor:
setting
Parameter
controlling
receives
RESET
this
parameter:
the
actual
IU
port
interfacing
ACKNOWLEDGE message .
HSDPA
support
capability
of
parametereter.
The smaller
parameter
value
the
cell
in
C-RNC;
the
actual
The
larger
parameter
value
means that RNC shall less
Secondary
Serving
Cell ID of
means
the entire
longer
responsive
repeat the
Reset
the
cell
in
C-RNC;
time
when when
CNofisthis
The
function
procedure
RNC doesn't
Influence
ofThis
this parameter
parameter:
unaccessible.
parameter:
receives RESET
This
paratmeter
isDual-Cell
configured
The
smaller
parameter
value
indicate
whether
ACKNOWLEDGE
message
with
thethe
Possible
Secondary
means
shorter
responsive
HS-DSCH
is
supported
for
Serving
Cell
ID
for
DC
cell,
time
when
CN
is
the
neighbor
cell
over
Iur.
The function of this
and
should
befactor
set according
unaccessible.
The
involved
for
setting
parameter:
Minimal
percent
to
the
actual
Secondary
thisCE
parameter:
DC by
HSDPA
of
can be used
the
Serving
Cell
ID
of
theincell
in
The
function
of Sharing
this
capability
of
the
cell
C-RNC
PLMN
for
RAN
while
C-RNC.
parameter:
MCC
for
RAN
Influence
of thiswhich
parameter:
carrier
sharing,
can CE
not
Suggestion
for
setting
Sharing
while
carrier
sharing,
This
parameter
indicate
be occupied by other this
parameter:
This
paratmeter
which
is not
adjustable.
whether
Dual-Cell
HS-DSCH
operator(PLMN);
should
be
set
according
to
The
involved for
factor
for
setting
is supported
the for
neighbor
The
involved
factor
setting
the
actual
Secondary
Serving
this
parameter:
MCC
for
RAN
cell over
Iur, andMinimal
should be
this
parameter:
Cell
ID
of
the
cell
in
C-RNC.
If
CE
Sharing
while
carrier
set according
thebeability
percent
of CE to
can
usedof
by
the
cell
in
C-RNC
support
DC
sharing,
which
is
not
cell in C-RNC
the PLMN
for RAN Sharing
HSDPA,
thisfor
parameter
adjustable.
Suggestion
settingwhich
this
while carrier
sharing,
should
be
set
to
the
Influence
of
this
parameter:
parameter:
This
parameter
should be set according to
Secondary
Serving
Cell ID;
MCC
forbeRAN
CE
Sharing
should
set
to If
the
requirement
from
The
function
of
this
The
function
ofaccording
this
the
cell
in
C-RNC
does
not
while
carrier
sharing,
which
is
the
ability ofThis
the parameter
cell
C- CE
operator.
parameter:
parameter:
MNC
for in
RAN
support
DC
HSDPA,
this
not
adjustable.
RNC
Influence
of this
parameter:
indicates
Number
of PLMN
Sharing
while
carrier
sharing,
parameter
isfor
invalid.
Suggestion
setting
this
Minimal
percent
of
CE
can be
for
RAN
CE
Sharing
while
which
is
not
adjustable.
parameter:
MCC
for
RAN
CE
used
by
the
PLMN
for
RAN
carrier
sharing,
which
is
not
The
involved
factor
for
setting
Sharing
while
carrier
sharing,
Sharing
while
adjustable.
thecarrier
value
of
this
parameter:
MNC sharing,
for0RAN
which
is
not
adjustable.
which
can
not
be occupied
indicates
not
sharing.
CE Sharing
while
carrier by
other
operator(PLMN);
The
The
involved
sharing,
whichfactor
is notfor setting
larger
of
the
value,
the
more
this
parameter:
This
adjustable.
CE
resource
thatparameter:
theNumber
operator
parameter
Influence
ofindicates
this
can
use.The
less
of
the
of
PLMN
for
RAN
CE
Sharing
MNC for RAN CE Sharing
value,
the less
CE resource
while
sharing,
which
while carrier
carrier
sharing,
which is
is
that
the operator
can
use.of 0
not
the
value
not adjustable.
adjustable.
Suggestion
setting
indicates
notfor
sharing.
Suggestion
for
setting this
this
parameter:
Minimal
Influence
of
this
parameter: MNCparameter:
forpercent
RAN CE
of
CEparameter
can
be used
bysharing,
the
This
indicates
Sharing
while
carrier
PLMN isfornot
Sharing
while
Number
ofRAN
PLMN
for RAN
CE
which
adjustable.
carrier
whichsharing,
should
Sharingsharing,
while carrier
be
set is
according
to the the
which
not adjustable.
MobileofCountry
Code
requirement
from
operator.
value
0 indicates
not
sharing.
parameter: This parameter
indicates Number of PLMN
for
RANNetwork
CE Sharing
Mobile
Codewhile
carrier sharing, which is not
adjustable. the value of 0
This
parameter
is the
indicates
not sharing.
segment of
(ARP) used in the mapping of
Basic Priority, and is not
adjustable.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
Yes
N/A
Scheduling Priority, Access

Control Priority, etc in RRM.
The involved factor for setting
The
function of this
this parameter:
When there
parameter:
This
parameter
are users with
different
ARP,
indicates
the
support
Traffic Class and THP,type
howofto
RLC
PDU
sizeresource
format for
allocate
radio
using
signaling
and
service.
priority.
(Flexible
or parameter:
Fixed Size)
InfluenceSize
of this
The
involved
factor
setting
The higher of Basic for
Priority,
this
parameter:
UE
capability;
the more probability to
traffic
performance
guarantee
the Qos; The lower
Influence
of this parameter:
of Basic Priority,
the lower of
This
parameter
indicates
the
This
parameter
is the
traffic
the radio
resource
using
support
type
of
RLC
PDU
class
used
in
the
mapping
of
priority;
size
format
for
signaling
and
Basic
Priority,
and
is
not
service.For
traffic,
Flexible
adjustable.
Function:
Non-Conversational
parameter:
The
principle
to
The function
of this
Size
canMaximum
reduce
the
MACis
service
MAC-d
configure
this
parameter
parameter:
This
parameter
head
cost
and improve
the
PDU
Size
Extended
that
the
higher
of the ARP,
indicates
the
Application
Iub
throughput;
For
signalling,
Configuration
Rule:
It needs
the
higher
of the
basic
Priority,
which
is mapped
Fixed
Size
isthe
suggested
to
consider
header
priority;
The
higher
of
theto
from
BPSeg,
BearType,
use
for
little
MAC
head
cost.
consumption
and
theand
quality
TrafficClass(C>S>I>B),
the
Direction(DL
or
UL)
Suggestion
for
setting
this
of
service.
higher
of
the
basic
priority.
So
RateSeg;
It's
used
in
parameter:
The
value
ofThis
the
parameter
that
the
higher
ofparameter
the
basic is
Overload
Control
and
indicates
the
support
type of
larger,
the
header
priority,
the
higher
QoS
Congestion
Control
forfor
RLC
PDU
size
format
consumption
is users
smaller,
and
it
priority
that
the
can
selecting
users
when
cell
load
signaling
and
service.
Traffic
save
resource;
but
it
is
easier
enjoy
and
be
guaranteed.
is
high.
is
suggested
to set
to Flexible
to
result
in PDU
transmission
The
involved
factor
forcan
setting
Size,
for when
Flexible
Size
mistake
the
radio
this
parameter:
When
there
reduce
the
MAC
head
cost
channel
quality
becomes bad.
are
users
withthe
different
and
improve
Iub
The
value
of
the
parameter
is
Mobile
Country
Code
BPSeg,
BearType,
and
throughput;
For
signalling,
smaller,
the
header
RateSeg
load cell,
Fixed
Sizeinishigh
suggested
to it's
consumption
isusers
larger,
and
which
class
of
will
be
use
for little
MAC head
cost.
a
waste
of
resource.
selected
downgrade
(Flexible to
Size
is only forQos.
Influence
this parameter:
traffic, andofsignalling
can only
This
parameter
indicates
Mobile
Network
Code
use
Fixed
Size in
3GPP the
Application
Priority
Release 9 or
later.) mapped
from BearType(the AP of
MBMS is highest, then the AP
of HSPA, the AP of DCH is
the lowest), BPSeg(the higher
the basic priority the higher
the application priority),
Direction(DL or UL) and
RateSeg(the higher the rate,
This
parameter
is the The
the lower
the priority);
Application
higher of thePriority
application
configuration
index.
priority, the lower
of the
possibility to be selected as
the decreasing load object,
This
parameter
is the radio
and the
higher QoS
bearer
type
used
in the of the
guaranteed; The lower
mapping
of
Application
application priority, the higher
Priority,
and is not
of the possibility
toadjustable.
be
selected
as
the
decreasing
load
object,
andBasic
the less
QoS
segment
of the
Priority
guaranteed.
used in the mapping of
Suggestion
for setting
Application Priority,
andthis
is not
parameter:
Qos
Parameters
adjustable.
which should be set
This
parameter
is the
according
to requirements
segment
of
the
Basic
Priority
from operator.If the operator
used
in
the
mapping
of
has no specific Qos
Application
and is
not
requirement,Priority,
the default
value
adjustable.
can be used in ordinary
network.
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: Qqualmin-offset is
used
for restricting
PLMN
This parameter
is the
ping-pong
when
segment ofreselection
the rate used
in
cell
selection of
and
reselection.
the mapping
Application
In
cell selection
and
Priority,
and is not
adjustable.
reselection: Squal =
Qqualmeas (Qqualmin +
QqualminOffset).
Configuration
Rule:
the risk of
indicates whether
the
re-selection
ping
pong.
Qrxlevmin-offset
will be
Function:
QrxlevminOffset
If the parameter
value is is
broadcast
in SIB3.
used
for
restricting
PLMN
smaller,
cell reselection
to of
Configuration
Rule: thewhen
risk
ping-pong
reselection
higher
priority
PLMN
cells
is
re-selection
ping
pong.
cell
selection
and
reselection.
easier
fullfilled
,
and
vice
If
the
value is
In
cellparameter
selection and
versa.
Open,
cell
reselection
reselection:
Srxlev = to This
Adjustment
Suggestion:
higher priority
cells is
Qrxlevmeas
PLMN
(Qrxlevmin
parameter
will
not
be used.+
harder
fullfilled
, and
QrxlevminOffset)
vice
versa.
Pcompensation.
Function:
This
parameter
The
function
ofRule:
this the risk
Adjustment
Suggestion:
Thisof
Configuration
The
function
of
this
indicates
whether
the
parameter:
This
parameter
parameter
will
not
be
used.
re-selection
pingparameter
pong.
parameter:
This
Qrxlevmin-offset
will
be
indicates
the
maximum
If the parameter
value istarget
indicates
the
maximum
broadcast
in
SIB3.
number
of
E-DCH
users
smaller,
cell reselection
toin of
UL
interference
for
athe
certain
Configuration
Rule:
risk
the
cell.
It
will
be
guaranteed
higher
priority
PLMN
cells is
cell
used
for ping
E-DCH
re-selection
pong.
by
admission
control
The
function
of
this
easier
fullfilled
and
would
scheduling,
including
If
the parameter
value is remechanism.
parameter:
This
parameter
selection
ping
pong
, and
vice
received
wide
band
power
Open,
cell reselection
to
The
involved
factor for
setting
indicates
the
maximum
versa.
from
all
sources,
which
is
higher
priority PLMN
cells an
is
this
parameter:
the maximal
number
of HS-DSCH
users
Adjustment
Suggestion:
Thisin
offset
relative
to
the
UL
harder
fullfilled
,
and
vice
E-DCH
user
number
that
the
cell. It will
be
parameter
will
notguaranteed
be
used.
interference
when
there
is no
versa.
NodeB
can support
in one
by
admission
control
load
in
the
cell.
This
Adjustment
Suggestion:
This
cell
mechanism.
is
used
by
the
parameter
will
not
be
used.
Influence
of this
parameter:
The involved
factor
forE-DCH
setting
Node
B scheduler
for
the larger
of thethe
value,
the
this
parameter:
maximal
Scheduling.
The
principle
more
of user
E-DCH
usersthat
can of
HSDPA
number
scheduling
thatthe
the totalof
admit
incan
theis
cell;
NodeB
support
one
The
function
of
this inless
rising
RTWP
caused
the
the
value, the
less
of by
E-DCH
cell
parameter:
This
parameter
uplink
services
should
not
users
canthe
admit
in the cell;
Influence
of
this
parameter:
indicates
maximum
exceed
this
target
value.
Suggestion
for
setting
this
the larger
offor
the
value,
the
throughput
MBMS
traffic
The
involved
factor
for
setting
parameter:
It's
set
to
the
more
of
HSDPA
users
in
a parameter:
cell, which is
used can
for
this
E-DCH
maximal
E-DCH
user
number
admit
inCAC.
the
cell;
the less
of
MBMS
Throughput,
UL support
Interference
that
NodeB
can
in
the
value,
the
less
of
HSDPA
The
involved
factor
for
setting
increment
of cell caused by
one
cell.
The
function
of this
users
can
admit
in the cell; for
this
parameter:
throughput
E-DCH
service
parameter:
Suggestion
for
MBMS
traffic
insetting
aparameter
cell. this
Influence
ofThis
this
parameter:
indicates
maximum
parameter:
It's
set
the
Influence
ofvalue
this
parameter:
The largerthe
oftothis
number
of
MBMS
users
in the
maximal
HS-DSCH
traffic
The
larger of
parameter,
parameter,
thethis
larger
uplink
cell.
It
will
be
guaranteed
number
that
NodeB
can
the
larger
the
MBMS
capacity
interference and the largerbyEadmission
control
support
in and
one
cell.
of
thethroughput
cell
the
DCH
ofeasier
the cell;
mechanism.
overload
of
the
cell.The
The
smaller
of
this
parameter,
The
function
this for setting
The
involved
factor
smaller
of
thisof
parameter,
the
the
less
uplink
interference
parameter:
Channel
Type
this
parameter:
the MBMS
smaller
the
capacity
of
the
and
the
less
E-DCH
Indicator
forthe
Downlink
capacity
of
cell;
the
cell
throughput
of the
cell
Enhanced
CELL_FACH
MBMS
performance
the
Suggestion
for
setting
Suggestion
for settingofthis
this
Priority
Queue
cell
parameter:
The
larger
of
this
parameter:
The
larger
value
The
involved
factor
forthe
setting
Influence
of
this
parameter:
parameter,
the
larger
of
this
parameter,
the larger
this
parameter:
Type
The
larger
of theChannel
the
MBMS
capacity
ofvalue,
the
uplink
interference
andcell
the
for
Downlink
Enhanced
more
MBMS
users
can
and
the
easierthroughput
overload ofofthe
larger
E-DCH
CELL_FACH
Priority
access
to
theis
cell;
theQueue
cell.the
default
value
issmaller
the
cell;
3dB
suggested
for
Influence
of
this
parameter:
of
the
value,
the
better
of the
suggested
to
use.
indoor
cells;
6dB
is
suggested
Channel
Type Indicator
for
MBMS
Service
Qos.
for
outdoor
cells;
8dB can be
Downlink
Enhanced
Suggestion
for
setting
this
set
in some particular
scene
CELL_FACH
Priority
parameter:
the
defaultQueue,
value
to
improve
cell
E-DCH
and
is not adjustable
is
suggested
to
use.
throughput.
parameter: set according to
the queue usage, and is not
adjustable
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
Yes
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

parameter:
parameter: Discard Timer ,
The
involved
for setting
which
definesfactor
the maximal
this
parameter:
time that MAC-hs SDU can
Influence
this parameter:
exist in DLofEnhanced
Suggestion
for
setting
this
CELL_FACHPriority
Queue.
parameter:
Timer
in
.which
is
The
this for setting
The function
involved of
factor
used
to
control
the
reset
of
parameter:
Re-ordering
this parameter:
traffic delay
the
MAC-ehs
reordering
release
timer (T1)
for DL
requirement
functionality
in
CELL_FACH
Enhanced
CELL_FACH
or
CELL_PCH
which
is used
to.This
avoid
The
larger
of the
value, the
parameter
is
an
array
congestion
of
UE
Mac-hsfrom
lower delay requirement
corresponding
arraytime
Buffer.
traffic, and the to
longer
CHTYPEIND.
The
involved
factor for
setting
that
SDU
in MAC-hs
queue
The
function
this
The
largerThe
of of
the
value,
the
this
parameter:
traffic
delay
can
exist;
smaller
of
the
parameter:
This
parameter
better
Qos
of
the
traffic
on
DL
requirement,
SDU
discard
value,
the
higher
delay
indicates
whether
Discard
EFACH
and
the
lower
of
cell
rate
requirement
from traffic,
and
Timer
is configured
for the
capacity
on
DL
Influence
oftime
thisEFACH.
parameter:
the
shorter
that
SDU
in
downlink
Enhanced
The
function
of this
the
larger
of the
value,
the
MAC-hs
queue
can
exist;
CELL_FACH
queue.
parameter:
longer
trafficReset
delay,
and the
The
function
of
thisTimer
The
involved
factor
forofsetting
Controlling
the
Reset
the
less
SDU
discard
rate;
the
parameter:
The
configured
this
parameter:
traffic
delay;
MAC-ehs
Reordering
for
smaller
of
the
value,
the
power
for HS-PDSCH in DL
cell
capacity
Enhanced
CELL_FACH
shorter
traffic
delay,which
and the
CELL_FACH
state,
is a
Influence
of discard
this
parameter:
which
is
multiples
of
T1
higher
SDU
rate;
power
offset
relative
to
the
This parameter
indicatesthe
values;
used
to indicate
configured
P-CPICH
power
The
function
of this
whether
Discard
Timer
is in
Reset
of
the
MAC-ehs
a
cell.
parameter:
the
configured
configured
for
the
Reordering
for
UE
infor setting
The
function
of
thisdownlink
The
involved
factor
power
for
HS-SCCH
in
Enhanced
CELL_FACH
CELL_FACH
or
CELL_PCH
parameter:
this
parameter:
power
for HSCELL_FACH
state,
which
isisa
queue.if
the
Discard
Timer
state.
The
involved
factor for setting
PDSCH
in
CELL_FACH
state,
power
offset
relative
to
the
configured,
the
SDU
in
avoid
congestion
of
UE
Macthis parameter:
traffic
performance
inpower in
configured
downlink
hs
Buffer.Enhanced
Influence
ofP-CPICH
this
parameter:
CELL_FACH
state,
cell
a
cell.
CELL_FACH
queue
willthis
be
The
involvedfor
factor
for
setting
Suggestion
setting
capacity
The
involved
factor
for
setting
discarded
when
it
exists
in
this
parameter:
traffic
delay
parameter:
this
parameter
Influence
offor
this
parameter:
this
parameter:
power
for
HSthe
queue
a
time
longer
requirement,
reset the
rate
indicates
the
Cell
Identity
of
The
larger
of SDU
the value,
SCCH
in
CELL_FACH
state,
than
the
configured
Discard
Influence
of
this
parameter:
the
downlink
better
Qos
of Enhanced
the traffic
on DL
traffic
performance
inTimer
Timer;
if the
is
the
larger
of Discard
the lower
value,
the
CELL_FACH
EFACH
and
the
of
cell
CELL_FACH
state,
cell
not
configured,
the default
longer
traffic
delay,
and
the
capacity
on
DL will
EFACH.The
capacity
maximal
value
be used.
less
SDU
reset
rate;
less
of
the
value,
the the
worse
Influence
of
this
parameter:
smaller
of the
value,
the
Qos
of
the
traffic
on
DL
The
larger
of the
value,
the
shorter
traffic
delay,
and
the
EFACH
andofthe
larger
ofon
cell
The
function
of
this
better
Qos
the
traffic
DL
higher
SDU
reset
rate;
capacityand
on MAC-ehs
DL
parameter:
EFACH
theEFACH.
lowerqueue
of cell
Suggestion
for
identity
inon
CELL_FACH
state
capacity
DL
EFACH.The
The function
of setting
this this
parameter:
this
parameter
is
The
factor
setting
less involved
of the value,
theforworse
parameter:
MAC-hs
a
power
level
relative
to
the
this
parameter:
MAC-ehs
Qos of the traffic onand
DL
Window(receiveing
configured
P-CPICH
power
queue
inlarger
CELL_FACH
EFACHidentity
and
the
of cellin
sending)
Size
for
MAC-hs
a
cell.
a
little
value
can
be set
state
capacity onnumber
DL EFACH.
queue(the
of Mac-hs
in
good
radio
environment
to
Influence
of
this
parameter:
Suggestion
for
setting
this
PDU)
provide
maximal
cell
capacity
MAC-ehs
queue
identity
in
parameter:
this
parameter
is
in
the
advance
of
good
traffic
CELL_FACH
state,
it's
The
function
this
a power
levelof
relative
tonot
the
this
parameter:
PDU
discard
performance;
a
large
value
adjustable
parameter:
Thisdelay.
parameter
configured
P-CPICH
power in
rate
and traffic
can
beaset
bad
radio
Suggestion
setting
indicates
the
Maximum
MACa cell.
little
value
canthis
be
set
Influence
ofinfor
this
parameter:
environment
to
provide
good
MAC-ehs
queue
cparameter:
PDU
Size
for
flexible
PDU
in good
radio
environment
the
larger
of the
value, the to
traffic
performance;
identity
in
CELL_FACH
state,
in
Downlink
Enhanced
provide
maximal
cell
more
of
MAC-hs
PDUcapacity
that
it's
not
adjustable
CELL_FACH.
in
the
advance
of
good
traffic
can
stay
in
MAC-hs
queue,
The
involved
factor
forvalue
setting
performance;
a large
the
lower
ofscheduling
PDU
discard
rate
parameter:
priority
this
UE
can parameter:
be
in bad
radio delay;
and
theset
longer
of
traffic
indication
for
enhanced
compatibility;
transport
environment
provide
the
smaller ofto
the
value,good
the
CELL_FACH
queue
efficiency
of
Downlink
traffic
performance.
less involved
of MAC-hs
PDUforthat
can
The
factor
setting
Enhanced
CELL_FACH
stayparameter:
in MAC-hs
queue, the
this
scheduling
Influence
of thisdiscard
parameter:
higher
PDU
priority of
indication
for rate
This
parameter
is
set
to the
and
the
shorter
of
traffic
enhanced CELL_FACH
maximal
delay. MAC-c PDU Size
queue
that
all theofUE
support on
Influence
thiscan
parameter:
Downlink
Enhanced
scheduling priority indication
CELL_FACH.
and is not
for enhanced CELL_FACH
adjustable
queue, it's not adjustable
parameter: scheduling priority
indication for enhanced
CELL_FACH queue, it's not
adjustable.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed
No
Yes
Fixed
No
Yes

parameter: ARP Segment
Number used for mapping
Mobile
Code
BP;
ForCountry
ARP in the
same
The
of the
this same BP
ARPfunction
Segment,
parameter:
parameter
value will beThis
mapped.
indicates
the
Allocation/Retention
this parameter: BP ofPriority
(ARP)
segment
threshold.
different
ARP users;
Mobile
Network
CodeOperator
The
function
of this
The
ARP
assigned
by core
requirement.
parameter:
BP
network
InfluenceinofRAB
thisSegment
parameter:
Number
used should
for
mapping
ASSIGNMENT
REQUEST
ARPSegNum
be set
AP(overload
control
priority
will
be
mapped
by
RNC
to
to the customers category
and
congestion
control
different
ARP segment.
For
number
according
to
The
function
of this
priority);
For
BP
inARP
the same
ARP
in the
same
operator's
requirement.
such
parameter:
This
parameter
BP
Segment,
the
same
Segment,
the same
BP value
as:
only
three
category
indicates
the control
Basic Priority
AP(overload
priority
will
be mapped.
customers(golden,
silver,
(BP)
segment
threshold.
The
and
congestion
control
The
involved
factor
for
setting
copper)
exist in
the
network,
Basic
Priority
will
be
mapped
priority)
value
will
be
mapped.
this
parameter:
BP be
of set to
this
parameter
will
to
different
BPfactor
segment(used
The
involved
for
setting
different
ARP
users;
Operator
3.
for
mapping
AP)
upon
this
this
parameter:
AP
of
different
requirement.
Suggestion
for setting
this
parameter.
For
in the
BP
users; of
Operator
Influence
thisBP
parameter:
parameter:
Qos
Parameters
same
BP Segment,
the same
requirement.
This
parameter
the
which
should
beindicates
set
AP
value
will
be
mapped.
Influence
of
this
parameter:
Allocation/Retention
Priority
according
to requirements
The
involved
factor
forused
setting
BP
Segment
Number
(ARP)
segment
threshold
and
from
operator.If
the
operator
this
parameter:
AP
of
different
The
function
of
this
for
mapping
AP(overload
should
be
set according
to
has
no
specific
Qos
BP
users;
Operator
parameter:
Thisand
parameter
control
priority
operator's
requirement.
requirement,
default
requirement.
indicates
the
number
of
congestion
control
priority);
Suggestion
for
setting
parameters
should
be this
used
Function:
This
parameter
Influence
this
parameter:
segments
ofQos
the
Traffic
For BP in of
the
same
BP
parameter:
Parameters
indicates
the
nominal
bit
This
parameter
indicates
the
Handling
Priority
(THP), rate
Segment,
the be
same
which
should
set
for
downlink
Basic
Priority
(BP)
segment
which
is
used
in
the
mapping
AP(overload
control
priority
according
to requirements
The
function
of this
threshold.
should
beoperator
set For
of
the
Basic
Priority
(BP).
and
congestion
control
from
operator.If
the
services
on
DCH
parameter:
This
parameter
according
to
operatr's
THP
in
the
same
THP
priority)
value
will
be
mapped.
has
no specific
Qos
Related
Factor:
BP
related
indicates
the
Traffic
Handling
requirement(BP
value
Segment,
the
same
BPand
value
Suggestion
for
setting
this
requirement,
default
data
throughput,
user
Priority
(THP)
segment
category).For
BP
in
the
same
will
be
mapped.
parameter:
Qos
Parameters
parameters
should
be
used.
experience
threshold.
Thefactor
THP
willsetting
be
BP
Segment,
the
same
The
involved
for
which
should
be
set
If
theparameter:
parameter
value
related
mapped
bytoRNC
to of
different
AP(overload
control
priority
this
BP
according
requirements
to
BPcongestion
is larger,
BP
THP
segment
upon
this
and
control
different
THP users;
Operator
from
operator.If
therelated
operator
data
throughput
and
user
parameter
which
is
used
in
priority)
value
will
be
mapped.
requirement.
has no specific Qos the
experience
will
be
improved.
the
mapping
of
the
Basic
Suggestion
for
setting
this
Influence
of this
parameter:
requirement,
default
If
theparameter
parameter
value
related
Priority
(BP).For
THP
the
parameter:
Qos
Parameters
This
indicates
the
parameters
should
beinused.
to
BP
is
smaller,
BP
related
same
THP
Segment,
the
which
should
be
set
number
of
segments
of
the
data
throughput
andbe
the user
same
BP
value
will
according
toThis
requirements
Traffic
Handling
Priority
parameter:
parameter
experience
will
be
affected.
mapped.
from operator.If
theDual-Cell
operator
(THP),
which
is used
in the
indicates
whether
The
involved
factor
forPriority
setting
has
no
specific
Qos
mapping
ofisthe
Basic
HS-DSCH
supported
and
this
parameter:
BP
of
requirement,
default
(BP). For
in the same
should
beTHP
set according
to
different
THP
users;
Operator
parameters
should
be
used.
THP
Segment,
the
same
BP
whether
the
DC
Function
is
requirement.
value
will
be
mapped.It's
not
open or not.
Influence
of this
parameter:
adjustable.
The
involved
factor
Function:
Rx-Tx
timefor setting
This
parameter
indicates
the
Suggestion
for
setting
this
this
parameter:
whether
Dualdifference
adjustment
switch
THP
segment
threshold.
It
parameter:
QosisParameters
Cell
HS-DSCH
supported
in
macro
should
bediversity
set be
according
to
which
should
set
in
this
cell.
Configuration
Rule:
operatr's
requirement(THP
according
to
requirements
Influence
of this parameter:
If
the parameter
is "On",
value
and category)
from
operator.If
the operator
This
parameter
indicates
when
downlink
receiving
Suggestion
for
setting
thistime
has
no specific
Qos
whether
Dual-Cell
HS-DSCH
will
change
along
with
the
parameter:
Qos
Parameters
requirement,
default
is
supported
and
should
be
moving
of
the
UE
or
with
the
which
shouldshould
be
setbe used.
parameters
set
according
to
whether
the
drifting
of
the
clock
between
according
to requirements
DC
Function
is
open
or
not.
Node
Bs, which the
will operator
lead to
from
operator.If
Suggestion
for setting
this
the
degradation
of
the
UE
has no specific
Qos HSparameter:
Dual-Cell
downlink
quality
or
even
call
requirement,
default
DSCH
Support
Indication,
drop.
parameters
should be used.
and
not adjustable.
If theisparameter
is "Off", call
drop may be happened when
downlink receiving time
change.
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
Yes
Downlink Enhanced
The
function of this
CELL_FACH
parameter:
Influence ofThis
this parameter
parameter:is
the
Priorityindicates
used in the
the
ThisBasic
parameter
mapping
of
Scheduling
transport band width
Priority(SP
mapped from
allocated forisDownlink
BP
and BearType),
and isthe
not
Enhanced
CELL_FACH;
The
function
of this the more
adjustable.
larger
of the value,
parameter:
This
parameter
The
involved
factor
for setting
of transport
band
width
thatis
the
radio
bearer
type
used
this
parameter:
Scheduling
can be used by Downlink in
mapping
Scheduling
Priority(SP
of
different BPand
EnhancedofCELL_FACH,
Priority(SP
is
mapped
frombe
users;
Operator
requirement.
the larger throughput
that
BP
and
BearType),
and
not
Influence
this parameter:
enjoyed byofusers
bearedison
adjustable.
This
parameter
is the Basic
Enhanced
CELL_FACH;
the
The
involved
factor
forless
setting
Priority
used
in
the
mapping
less
of
the
value,
the
of
The
function of this
this
parameter:
Scheduling
of
Scheduling
Priority(SP
is
transport
band
width
that can
parameter:
SP(Scheduling
Priority(SP
of
different
BP
mapped
from
BP from
and BP
be used mapped
by
Downlink
Priority)
and
users;
Operator
requirement.
BearType),
and
is
not
Enhanced
CELL_FACH,
and
BearerType,
used
for
Influence
of this parameter:
adjustable.
the
less throughput
that be
selecting
pre-empted
This
parameter
is beared
the users
Basic
Suggestion
for
setting
thison
enjoyed
by
users
when
radio
resource
Priority
used
in
the
mapping
parameter:
This
parameter
Enhanced
CELL_FACH;
congestion
occurred
or is is
of
Scheduling
Priority(SP
the
Basic
Priority
used
in the
Suggestion users
for setting
this
scheduling
in
access
mapped
from
BP
and
mapping
of
Scheduling
parameter:
Thistoparameter
refused
queue
BearType),
and
isattempt
not from
Priority(SP
is
mapped
indicates
the
transport
band
accessing
the
cell.
adjustable.
BP
and
BearType),
and
is not
width
allocated
for
Downlink
The
involved
factor
for this
setting
The
functionPriority
of
this
Suggestion
for
setting
adjustable.If
the
operator
has
Scheduling
index
Enhanced
CELL_FACH,
this
parameter:
SP
of
parameter:
This
parameter
Qos
Parameters
no
specific
Qos
requirement,
which
should
match
the
traffic
different
BP
indicates
theand
configuration
which
should
be BearerType
setshould
default
parameters
planning;
the default
value be
is
Users;
operator's
requirement
index
of
the
admission
control
according
to
requirements
used.
suggestedoftothis
setparameter:
if no
Influence
parameters
basednot
on the
from
operator.It's
peticular
requirement.
SP(Scheduling
Basic
Priority.Different
cellhas
adjustable.If
thePriority)
operator
mapped
from
BP
and to
can
use
this
parameter
no
specific
Qos
requirement,
The
function
of
this
The
function the
of this
BearerType;
higher
of SP,
index
control
defaultdifferent
parameters
should
be
parameter:
Thisaccess
parameter
parameter:
Application
priority
the
higher
probability
being
parameters
according
to
used. used
indicates
whether
the cell
index
in
congestion
scheduled
and
the higher
operqtor's
requirements.
supports
the
downward
control.Different
cell can
use
access
success
rate;
less
The
involved
factor
forthe
setting
Enhanced
Layer
2index
function
or
this
parameter
to
of
SP,
the
less
probability
this
parameter:
admission
not
and
is
configured
different
congestuion
control
being
scheduled
and
control
parametets
forthe
cellless
according
toaccording
the cell
parameters
to
access
success
rate;
Influence of
this parameter:
capability
operqtor's
requirements.
Suggestion
setting
this
index
of the for
admission
control
The
involved
factor
for
The
involved
factor
for setting
setting
parameter:
Qos
Parameters
parameters
based
on
the
this
parameter:
whether
the
this
parameter:
Application
which
should the
be
set
Basic
Priority,
and
is
not
cell
supports
downward
Priority
index
in cell used for
according
to
requirements
adjustable.
Enhanced
Layer
2 function or
Congestion.
from
operator.It's
not this
Suggestion
for
setting
not;
Commercial
Influence
of this
parameter:
adjustable.If
the
operator
has
parameter:
index
ofindex
the
agreement(whether
this in
Application
Priority
no
specific
Qos
requirement,
admission
control
parameters
feature
is for
licensed).
cell
used
Congestion,
and
default
parameters
should
based
on
thethis
Basic
Priority,be
Influence
of
parameter:
is
not
adjustable.
used.
and
isparameter
not adjustable.
This
indicates
Suggestion
for setting
this
whether
the
cell
supports the
parameter: Application
Parameter
Function:
downward
Enhanced
Layer
Priority index
in cell used
for2
Application
priority
function
or not
and
is not used
Congestion,
and
is index
not
in
congestion control.
adjustable.
adjustable.
The
function
ofparameter
this It must
Function:
This
Configuration
Suggestion
forRule:
setting
this is
parameter:
this
parameter
indicates
the
Scheduling
meet the restriction
between
parameter:
This
parameter
the
Dual-Cell
HS-DSCH
Priority
configuration
index
LdCtlPriIndex
of utranCell
indicates
whether
the
cell
Support
Indication,
and
used
for
congestion
and
AppPriIndex
of
AppPri.
supports
the
downward
should
be set
according
scheduling.
. There
are to or
Enhanced
Layer
2 function
cell capability
andsets
several
different
of
not
and is configured
requirement
from
operator.
configuration
of
the
according
to the
cellfor setting
The involved
factor
Scheduling
Priority
configured
capability.this
feature
can HSthis
parameter:
Dual-Cell
in
RNC
level
and
different
improve
the
Iub
throughput
DSCH
Support
capability
of
cells
can
usetothis
parameter
and
suggest
support
it as
the
cell,
requirement
from
to
index
different sets of
soon
as the
possible.
operator(commercial
the configuration seperately.
aggrement)
this parameter is the DualCell HS-DSCH Support
Indication, and is not
adjustable
parameter: this parameter is
the Dual-Cell HS-DSCH
Support Indication, and is not
adjustable
Fixed
No
Yes
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
requirement
this parameter: DL Enhanced
CELL_FACH capability of the
cell; requirement from
operator(commercial
aggrement)
whether the downlink
Enhanced CELL_FACH can
be supported by the cell.
Whether to open this function
is decided by operator
Cell ID
requirement
parameter: This parameter
downlink Enhanced
CELL_FACH
can be
Parameter Index
supported by the cell, and is
not adjustable.This function
can improve FACH
performance, short RRC
setup
dalay,Index
and suggested to
Parameter
use it as soon as possible.
Parameter Index

Parameter Index
parameter:
Code Resource
Reserved Ratio, relative to
the operator's cell Qos
strategy(when the Code
Resource Occupied Ratio
reach
the CodeTreeResRto,
Parameter
Index
The
thisservice will
lowerfunction
priority of
DCH
parameter:
This
parameter
be refused to
access
the cell,
indicates
the downlink
TCP
so that Reserving
certain
threshold
for DCH
admission
This parameter
is the
Basic
code
for higher
priority
DCH
which
a percent
Priority
in thevalue
mapping
serviceisused
and
improve
the
relative
to cell TCP.Different
of
AC threshold,
and of
is not
access
success
rate
higher
downlink
TCPservice
threshold
adjustable.
priority
DCH
) for
DCH
admission
canfor
besetting
set
The involved
factor
for
BP, higher
and reserve
thisdifferent
parameter:
priority
some
resident
for overload
DCH
This isservice
only a refused
index
ofrate,
CAC
control(overload
threshold
code
resource using
rate.
threshold.
should
beof
higher
than
Influence
this parameter:
admission
threshold)
the more ofcontrol
Reserved
Code
The
involved
forcode
setting
Resource,
thefactor
less of
this
parameter:
power
resource
that can
be used by
resource
using
DCH service
of rate(DL
current DCH
capacity),
power
priority, the more resource
of code
using
priority
of by
resource
that for
canusers
be used
different
BP, whether
cell
DCH service
of higherthe
priority
will
overload.
thanbe
current
priority; the less
Influence
of this
parameter:
of Reserved
Code
Resource,
The
larger
of
this
the more of code parameter
resource
value,
thebelarger
cell
that can
usedof
bythe
DCH
downlink
and the
service ofcapacity
corresponding
easier
cellless
overload;
priority,ofthe
of codeThe
less
of this
parameter
value,
resource
that
can be used
by
the
of theofcell
downlink
DCHless
service
higher
priority
capacity
than corresponding priority;
Suggestion
Suggestion for
for setting
setting this
this
parameter:
parameter: Qos
Qos Parameters
Parameters
which
which should
should be
be set
set
according
according to
to requirements
requirements
from
from operator.If
operator.If the
the operator
operator
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi Yes
zation
N/A
Network
Planing&Optimi Yes
zation
N/A
Fixed
No
Yes
Fixed
No
Yes
Fixed
No
N/A
threshold
forexceeds
DCH
admission
HS-DSCH
interference
this
can
be
set
for
different
BP,
admission.
If the downlink
admission control
threshold,
and
reserve
some
resident
power
exceeds
this
the new service requested on
The
function
of be
thisthreshold,
for
overload
control(overload
admission
E-DCH
willcontrol
not
admitted.
parameter:
This
parameter
threshold
should
be
higher on
the
new
service
requested
This parameter is
configured
indicates
TCP
than admission
control
HS-DSCH
willdownlink
not
bePriority,
based
on the
the
Basic
threshold
for
MBMS
threshold)
admitted.
This
parameter
and reserve
some
residentis
admission.
Ifcontrol
the
downlink
The
involved
factor
setting
configured
based
onfor
the
for overload
power
exceeds
this
this
parameter:
UL
DCH
Basic
Priority,
and
reserve
control(overload threshold
admission
control
threshold,
capacity,
RTWP
resource
some
resident
forthan
overload
should
beUL
higher
The
function
of
this
the
new
MBMS
service
using
priority
for
users
ofwill
control(overload
threshold
admission
control
threshold)
parameter:
This
parameter
not
be
admitted.This
different
whether
the
cell
should
beBP,
higher
than
The
involved
factor
for
setting
indicates
the
Offset
of NodeB
parameter
is configured
will
be
overload.
admission
control
threshold)
this
parameter:
UL
E-DCH
Safe
Admission
Threshold
based
onUL
thethis
Basic
Priority,
Influence
of
parameter:
The
involved
factor
for
setting
capacity,
RTWP
resource
When
DCH
Has
Higher
AC
and
reserve
some
resident
The
larger
of
this
parameter
this
parameter:
power
using
priority
for users
ofof
Priority
than
HS.
it's
one
for
overload
control(overload
value,
theBP,
larger
of thethe
cell
resource
using
rate(DL
DCH
different
whether
cell
DCH
CAC
conditions
when
threshold
should
be
higher
uplink
capacity
and
the
easier
capacity),
power
resource
will
be
overload.
DCH
CAC
threshold
is
higher
than
admission
control
of
cell
overload;
The
less
of
The
function
of
using
priority
forthis
users
of
Influence
of this
parameter:
than
HS
CAC
threshold.
This
threshold)
this
parameter
value,
the
less
parameter:
This
parameter
different
BP,
whether
the cell
The
larger
of
this parameter
parameter
is configured
The
involved
factor
for
setting
of
the
cell
uplink
capacity
indicates
the
MBMS
load
will
be
overload.
value,
the
larger
of
the
cell
based
on of
the
Basic
Priority.
this
parameter:
power
Suggestion
for
setting
this
threshold
for
Influence
this
parameter:
uplink
E-DCH
capacity
and
The
involved
factor
for
setting
resource
using
rate(MBMS
parameter:
for
the
large
counting/recounting.
If cell
the
larger
of
this
parameter
the
easier
of
cell
overload;
this
parameter:
Power
capacity),
power
resource
RTWP
fluctuating
reported
load
is the
greater
thecell
value,
larger
of
the
The
less
of
thisthan
parameter
resource
using
rate(DL
DCH
using
priority
for
users
of
from
NodeB,
large
UL
DCH
threshold
indicated
bycell
this
Streaming
HSDPA
capacity
value,
the
less
of
the
capacity),
power
resource
different
BP,
whether
the
cell
AC
Threshold
should
be
parameter,
and
thecapacity
easier of cell
uplink
using
priority
for
users
of
will
be
overload.
set(e.g.
Default
setting
is
counting/recounting
will
be
overload;
The
less
of
this
Suggestion
for
settingthe
this
different
BP,
whether
Influence
ofvalue,
this
parameter:
kept)
to close
the
UL
AC
executed
and
PTP/PTM
parameter
the
lesscell
of
parameter:
For
the
large
will
be
overload.
The
larger
of
this
parameter,
function
indirectly(avoiding
mode
will
be
switched
based
the
cell
Streaming
HSDPA
RTWP
fluctuating
reported
Influence
of
parameter:
the
larger
of this
the
MBMS
error
admission
refusion).
on
the
counting/recounting
capacity
from
NodeB,
large
UL E-DCH
The
larger
capacity
of of
the
cellparameter
and
the
result.
Suggestion
forthis
setting
this
AC
Threshold
should
be
value,
the
larger
of
the
cell
easier
overload
of
the
The
involved
factor
for
setting
parameter:
Qos setting
Parameters
set(e.g.
Default
is
downlink
capacity
for
the
cell.The
smaller
of
this
this
parameter:
Qos
and
which
should
be
set
kept)
to
close
the
UL
AC
corresponding
priority
the
parameter,
the
smallerand
of the
capacity
oftoMBMS
according
requirements
function
indirectly(avoiding
easier
of
cell
overload;
The
MBMS
capacity
of
the
cell
Influence
of this the
parameter:
from
operator.If
operator
error
admission
refusion).
less
of
this
parameter
value,
Suggestion
forthis
setting
this
The
larger
of
parameter
has no
specific
Qos
the
less
of
the
cell
downlink
parameter:
Qos
Parameters
value,
the
better
of
the
requirement, default MBMS
capacity
for
the
which
should
be set
Qos
and
theshould
less
ofbe
the cell
parameters
corresponding
priority
according
to requirements
MSMS
capacity;
The less is
of
used(handover
threshold
Suggestion
setting
this
from
operator.If
the operator
this
parameter
value,
the
higher
than for
ordinary
parameter:
Qos
Parameters
has
noofspecific
Qos
worse
the
MBMS
Qos and
threshold;
keep
cell
capacity
which
should
be
setpossible
requirement,
default
the
larger
of
the
cell
MSMS
highest
as
soon
as
The
function
of this
according
toshould
requirements
Mobile
Country
Code
parameters
be
capacity;
The
function
of
this
in
the
condition
that
cell
is not
parameter:
Background
from
operator.If
the
operator
used(handover
threshold
Suggestion
for setting
thisis
parameter:
This
parameter
overload).
Noise
Automatic
Adjustment
has
no than
specific
Qos
higher
ordinary
parameter:
Parameters
indicates
theQos
original
Switch
requirement,
default
threshold;
keep
cell
capacity
which
should
be
setwhich
background
noise,
is
The
involved
factor
for setting
parameters
should
The
function
of
this
highest
as to
soon
as be
possible
according
requirements
the
default
configuration
of
this
parameter:
Whether
to
congfigured
based
on
used(handover
threshold
isnot
parameter:
Cell
Downlink
in
theoperator.If
condition
that
cell is
from
the
operator
background
noise
when
cell
switch
on
the
function
of
network
authorised
area
higher
than
ordinary
Admission
Control
Switch,
overload).
has
no
specific
Qos
is
setup.
Background
Noise
threshold;
keep
cellAutomatic
capacity
Controlling
whether
the
requirement,
default
This
parameter
will
take
Adjustment
highest
as
soon
as
possible
downlink
power-based
CAC
parameters
be
effect
when
the
cell
is setup;
Influence
of should
thisthat
parameter:
in
the
condition
cell
is not
finction,
HSDPA
Throughputused(keep
cell capacity
This
parameter
will
takebe
This
parameter
should
set
overload).
based
CAC
finction
and
highest
as soon
as possible
effect
when
the
"Background
to
"1:
open"
always,
because
wlashcode-reservation
CAC
in
the
condition
that
MBMS
Noise
Automatic
Adjustment
the
Uplink
load(RTWP)
function
are
turn on from "Off"
Qos
can
be
guaranteed).
Switch"
is
changed
threshold
are factor
relative
cell
The
involved
fortosetting
to"On"
if the cell
is already
base
noise(dB
Value)
,
so
the
this
parameter: whether the
setup;
veracity
of
cell
base
noise
is
downlink
power-based
CAC
This
parameter
willthe
take
very
important
for
cell
finction
and the
wlashcodeeffect
when
"Background
uplink
capacity
and
reservation
CAC
function are
Noise
Automatic
Adjustment
performance
turn
on is changed from "On"
Switch"
Suggestion
setting
this
Influence
of for
this
parameter:
to
"Off" if the
cellparameter
is already
parameter:
This
To
avoid cell overload,
setup.
should
beaccess
set to "1:
open"
downlink
control
The
involved
factor
for setting
always,
switch(DlCacSwitch)
should
this parameter: The verocity
becell
set background
to "1: open" noise
of
Suggestion
for setting
this
when the value
of
parameter:
To
avoid
cell
BckNoiseAdjSwh is "Closed".
overload,
downlink
access
Influence of
this parameter:
control
switch(DlCacSwitch)
The verocity of cell
should
be setnoise
to "1:when
open"
background
the
value of BckNoiseAdjSwh is
"Closed" which
parameter: If the value of
BckNoiseAdjSwh is "Closed",
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
The
function
of this
This
parameter
is used in the
be
got.
parameter:
this
parameter
admission
control
involved
factor
for setting
The
function
of
thisalgorithm
indicates
the
Maximum
based
on
code
tree
reserved
this
parameter:
the
value
parameter:
This
parameter
Number
of Users
can be of
ratio,
in
order
to
reserve
downlink
initial
transmit
indicates
maximum of
carried
onthe
Downlink
some
power(DL
OLPC),
success
signaling
user
numbers
on
Enhanced
codes(CodeTreeResRto)
for
rate
of
service
setup
and
DCH
in
the
cell.
If
the
new
CELL_FACH.When
user
users
of
certain
higher-priority
success
rate
of downlink
"RRC
setup
request"
setup
number
on
DOWNLINK
service.
These
two
parameter
access.
on
DCH
will
lead
the
number
ENHANCED
cooperate
calculate
thethis
Influence
oftouses
this
parameter:
of
signaling
exceed
CELL_FACH(HS-DSCH
reserved
codes
number
The
larger
value
of
the
threshold,
new "RRCof
channel
in this
CELL_FACH
the
reference
SF
layer.
parameter,
the
larger
setup
request"
will
notofbethe
state)(Dedicated
H-RNTI
in
The
involved
factor
for
setting
predicted
increasment
accepted
on
DCH
,
andof
it will
ENHANCED
CELL_FACH
this
parameter:
code
transmit
power,
theover
higher
attempt
on
FACH.
state
Allocated
)is
resource
access
refused
rate
success
rate
of
radio
link
The
involved
factor
for
setting
DLEFACHUserNum,
then
of
higher-priority
service;
setup,
the
higher
congestion
this
parameter:
Access use
DOWNLINK
ENHANCED
rate
of
code
resource
rate
of
radio
link
setup;
success rate of
RRC
setup
CELL_FACH
reject
any
new
Influencepre-emption
ofthe
this
parameter:
otherwise,
less
of of
the"RRC
request;
service;
else,
DOWNLINK
The
more
of thetoreserved
predicted
increasment
of
setup
request"
service.
ENHANCED
CELL_FACH
codes,
the
less
of
the
code
transmit
power,
the
less
Influence
of
this
parameter:
can
access
newless
service.
This
using
ratio
and
cell
success
rate
of
linkthe
The
larger
of
theradio
value,
parameter
should
be
set
capacity,
more
of the
setup,
theand
lessthe
congestion
less
possibility
that
the RRC
according
DL
EFACH
code
refused
ratio
for
high
rate
of
radio
link
setup.
SETUP be CAC
refused on
CAPACITY
Requirement.
priority
users
insetting
high-load
cell;
Suggestion
for
this
CELL_DCH;
The
less
the
The
involved
factor
forof
setting
The
less
of
the
reserved
parameter:
average
value,
, the the
more
possibility
to
this
parameter:
the
Maximum
codes,
the
more
of the
code
pathloss
of
ordinary
scene
in
be
refused.
This
parameter
indicates
the
Number
of and
Users
cancell
be
using
ratio
more
network
should
be set.
Suggestion
for
setting
this
Background
Noise
Automatic
carried
on
Downlink
capacity,
and
theparameter
less
of the
parameter:
This
Adjustment
Scene,
which
Enhanced
CELL_FACH
The
of
thisfor highisis
codefunction
refused
ratio
used
to
solve
the
network
distinguish
difficult
Influence
of
this
parameter:
parameter:
this
parameter
priority
users
in
high-load
cell.
optimization
problem
in Lybia
scene
or easy
scene
for
the
larger
of
the
parameter,
indicates
the
common
Suggestion
for
setting
this
in
which
than
Background
Noise
the
moremore
Users
canten
be to
measurement
type,
decided
parameter:
setAdjusting.
according
thousand
RRC
Automatically
The
carried
on
Downlink
by
common
measurement
operator's
strategy
for
higherThe
function
of this
CONNECTION
REQUEST
easier
to
adjust,
the
less
error
Enhanced
CELL_FACH;
purpose(value
single
for
a
priority
service;
the
less
ofthe
the
parameter:
thisisparameter
exit
per
15
minutes
in
one
between
Background
Noise
less
of
the
parameter,
the
certain
measurement
value,
the
less
the
code
indicates
the
L3ofnetwork,
filter
cell.
In
ordinary
that
and
the
real
value
in high
less
Users
can
be
carried
on
purpose)
refused
ratio
for
high
priority
coefficent
scene
will
not
happen
and
load
cells,Enhanced
butfactor
mistakenly
Downlink
The
involved
for
setting
users
in high-load
cell.
The
involved
factor
forbe
setting
this
parameter
should
to a
adjusting
maybe
happen.
CELL_FACH.
this
parameter:
common
this
parameter:
the
larger
value
to
avoid
RRC
The
function
of
this
Suggestion
for
setting
this of
measurement
purpose
smoothness
and
Real-time
CONNECTION
limited.
parameter:
this
parameter
parameter:
the
larger
of
the
Suggestion
for
setting
this
conmmon
measurement
indicates
the
common
parameter,
the
more
Users
parameter:
this
parameter
report value object type, is
measurement
can
be carried
Downlink
decided
byofcommon
Influence
thisonparameter:
decided
byCELL_FACH;
common
Enhanced
measurement
purpose(value
the
less of the purpose(value
value, the the
less
measurement
less
of
the
parameter,
the
is
single
for
a
certain
fluctuate
of
the
conmmon
is
single
forcan
a certain
less
Users
be carried
on
measurement
purpose)
, and
measurement
report
value;
measurement
purpose)
Downlink
Enhanced
is
not
adjustable
the
larger
of the
value,
the
The
involved
factor
for
CELL_FACH.
it's
set
tosetting
the
The
function
of
this
more
real-time
of
the
this
parameter:
The
function
of this
Maximum
Number
of
Users
parameter:
this
parameter
conmmon
measurement
Influence
of
this
parameter:
parameter:
this
parameter
that
thevalue
cell
can
support
on
indicates
the
common
report
common
measurement
indicates
the
measurement
Downlink
Enhanced
measurement
configuration
Suggestion
for setting
this
purpose
type
and report
method
etc.
CELL_FACH
and
is not to
number(index)
parameter:
not
suggest
Suggestion
for
setting
this
of
the
configuration
suggest
to adjust.
involved
factor
The
function
of
this for setting
adjust
parameter:
this
parameter
is
parameters
for the
common
this
parameter:
common
parameter:
this
parameter
decided
by
common
measurement
configuration
measurement
configuration
measurement
index,
decidedpurpose(value
by common
number(index)
measurement
report
period,
is
single
for
athis
certain
measurement
purpose(value
Influence
ofcommon
parameter:
decide
the
measurement
purpose)
, and
is
single
certain
index
andforisanot
adjustable
measurement
report
interval
is
not
adjustable
measurement
purpose)
Suggestion
for setting
for
period report
with this
The
involved
factor
forissetting
parameter:
index
and
not
parameter
of
RptPrdUnit
this
parameter:
common
adjustable
measurement
this parameter:purpose
UE
Influence
this parameter: is
positioningofcommon
not
adjustable Accuracy
measurement
Suggestion
setting
requirement;for
Iub
load this
parameter:
this
parameter
Influence of this parameter:is
decided
the
largerbyofcommon
the common
measurement
measurement purpose(value
report interval
is
a certain
forsingle
periodfor
report,
the larger of
measurement
purpose)
Iub load; the less
of the , and
is
not
adjustable
common measurement report
interval for period report, the
more real-time of
measurement report
parameter: not suggest to
adjust
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed
Yes
N/A
Don't Care
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
period(milliseconds or
minutes), decide the common
measurement report interval
for period report with
The
function
this
parameter
of of
RptPrd.
parameter:
this
parameter
The involved
factor
for setting
indicates
the
common
The
function of this
this parameter:
UE
measurement
type(preiod
parameter:
This
parameter
positioning common
report
or On
report)
indicates
the demand
default
Cpich
measurement
Accuracy
The
function
of
this
The
involved
factor
for setting
Ec/No
of the cell,
used
for
requirement;
Iub
load
parameter:
Cell
Uplink
this
parameter:
calculating
increment
Influence
ofpower
thismeasurement
parameter:
Admission
Switch,
purpose
resulted
the
the largerbyofControl
thenew
common
controlling
whether
Influence
of
this
parameter:
connected
traffic
forthe
scene
measurement
report
interval
RTWP-based
CAC
function
is
this
parameter
is
byof
where
valid
Cpich
Ec/No
can
for period report, decided
the
larger
turn
on.
common
measurement
not
gotthe
from
UE
powerIub be
load;
less
ofinthe
The
involved
factor
for setting
purpose(value
is single
for
a
based
access
control
common
measurement
report
this
parameter:
Whether
certain
measurement
algorithm.i.e.
RAB
interval
for period
report, the
the
RTWP-based
function
purpose)
Assignment
orCAC
PS
rate is
more real-time
of data
turn
on.
Suggestion
for
setting
this
increasing,
etc.
measurement report
Influence
ofthis
this
parameter:
parameter:
parameter
isIf
The
involved
factor
for this
setting
Suggestion
for
setting
the
value
is
"open",
RTWPdecided
by common
this
parameter:
the valuetoof
parameter:
not suggest
based
function
is turn
measurement
purpose(value
downlink
initial
transmit
adjust CAC
on;
If
the
value
is
"closed",
is
single
for
a
certain
power(DL OLPC), success
RTWP-based
Function:
This CAC
parameter
measurement
purpose)
rate of service
setupfunction
andand is
turn
off; rate
indicates
thetoof
maximum
not suggest
adjust
success
downlink
Suggestion
forcongested
setting this
number
access. of the
parameter:
The
uplink
CAC
calls
in theoftrue
Influence
thisqueue.
parameter:
function
is
suggested
to
be
Related
Factor:
successful
Larger value for this
closed
for
RTWP
fluctuating
call
rate,
access
time
delay
parameter will lead smaller
Function:
Thismay
parameter
acutely
which
lead
If
the parameter
value
iserror
initial
transmit
power
and
indicates
the
maximum
time
CAC judgment.
larger,
it will
improve
theof
lower
the
success
rate
length
that
the
call
can
stay
successful
call rate
RAB Assignment
or but
PS affect
datain
the
true
queue;
the
access time delay.
increasing;
Related
Factor:
successful
If
the parameter
value
Smaller
value
for
this is
Function:
This
parameter
call
rate,
access
time
delay
smaller,
it
will
improve
the
parameter
willmaximum
lead Larger
indicates
the
If
the
parameter
value
istime
access
time
delay
but
affect
initial
transmit
power
and
length
that
the
service,
larger,
it
will
improve
the
the
successful
call
rate.which
access
refused
probability
for
relocates
into
UTRAN,
can
successful
call
rate
but
affect
RAB
Assignment
or
PS
data
stay
in the true
the
access
timequeue
delay.
increasing
Related
Factor:
successful
If
the
parameter
value this
is
Suggestion
for setting
call
rate,itaccess
time delay
smaller,
will
improve
the
parameter:
the average
If the parameter
value
isPaccess
time delay
but affect
CPICH
Ec/No
of
ordinary
larger,
it will improve
the
the
successful
callshould
rate.
scene
in network
be
successful
call rate
but affect
set.
the
accessThis
timeparameter
delay.
Function:
If the parameter
valuebit
is rate
indicates
the nominal
smaller,
it
will
improve
the
for
uplink
Invalid parameter
access
time
delay
but affect
Function:
The
parameter
the
successful
call
rate.
services
on
DCH.
indicates the the tolerance
Related
Factor:
BP
related
period in uplink outer
loop
data throughput,
user
power
control using
threshold
experience.
algorithm.
If
the parameter
value related
Related
Factor: service
to
BP
is
larger,
BP
related
quality, system capacity.
data
throughput
and
If the parameter valuethe
is user
experience
will
be
improved.
larger, it is more difficult to
If the parameter
value related
Function:
The
decrease
the parameter
to
BP is smaller,
BP related
indicates
the transport
SIRtarget.Accordingly,
it will
data
throughput
and
the
user
channel
quality
target.
improve BLER
the service
quality
experience
will
be
affected.
Related
Factor:
service
but affect the system
quality,
system capacity.
capacity.
If
the
parameter
If the parameter value
value is
is
larger,
the to
smaller,it itwill
is improve
more easier
system
capacity
but affect the
decrease
the SIRtarget.
service
quality.
Accordingly,
it will improve the
If
the parameter
is the
system
capacity value
but affect
smaller,
it
will
improve
the
service quality.
service quality but affect the
system capacity.
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Don't Care
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A

indicates the threshold of
sample number to decrease
SIR target when E-TTI=10ms.
Related
service
Function:Factor:
This parameter
quality, system
capacity.
indicates
the E-DCH
HARQ
If
the parameter
value
is is
power
offset FDD,
which
larger,
it
is
more
difficult
to
used to compute the
decrease
the
quantized gain factor ed of
it will
E-DPDCH.
improve
the
service
quality
Function:
This
parameter
Related Factor: service
but affect
the error
system
indicates
the
transport
quality,
system
capacity.
capacity.
block
number threshold
If the parameter
value isin
If
the parameter
is
outer
loop
powervalue
control
larger,
the E-DPDCH
smaller,
it
is
more
easier
to
using
threshold
algorithm.
transmission
will be
Function:
Thispower
parameter
decrease
the
SIRtarget.
Related
Factor:
service
larger.Accordingly,
it will
indicates
the maximum
Accordingly,
it will
improve
quality,
capacity.
improvesystem
theretransmissions
service
quality the
number
of
for
system
capacity
but
Configuration
Rule:
but
affect
the
system
the sub service whenaffect
it is the
service
quality.
If
the parameter
value is
capacity.
beared
on
E-DCH.
larger,
it
is moreservice
difficultisdata
to
If the parameter
value
Related
Factor:
increase
the
smaller, the
E-DPDCH
accuracy,
service
data
will
Function:
Thispower
parameter
transmission
willitbe
throughput;
improve
the
system
capacity
indicates
the
number
of
smaller.
Accordingly,
it
will
If the parameter value is
but
affect
thesystem
quality.
HARQ
retransmission
(NHR)
improve
the
larger,
there
isservice
more capacity
times
of
If
the
parameter
valuequality.
is
threshold
to
SIR
but
affect
thedecrease
service
HARQ
retransmisson.
smaller,
it is E-TTI=10ms.
more
easier tothe
target
when
Accordingly,
it will improve
increase
the
SIRtarget.
Related
Factor:
servicebut
service data
accuracy
Function:
This
parameter
Accordingly,
itnumber
will
improve
quality,
system
capacity.
affect the
service
data
indicates
the
of the
service
quality
but
affect
If
the
parameter
value
is the
throughput.
HARQ
retransmission (NHR)
system
capacity.
larger,
it
is
more
easier
If the parameter
valueSIR
isto
threshold
to increase
decrease
the
smaller,
there
is
less
times
target when E-TTI=10ms. of
HARQ
Relatedretransmisson.
Factor: serviceit will
improve
the
system
capacity
Function:
This
parameter
Accordingly,
it will
improve
the
quality,
system
capacity.
but
affect
thethroughput
service
indicates
the
threshold
service
data
If
the
parameter
valuequality.
isofbut
If
the parameter
value
isto
sample
increase
affect
the
data
larger,
itnumber
isservice
more to
difficult
smaller,
it
is
more
difficult
SIR
target
when
E-TTI=10ms.
accuracy.the
increase
Function:
This parameter to
decrease
the number
SIRtarget.
Related
Factor:
serviceit will
indicates
the
Accordingly,
it
will
improve
the
quality,
system
capacity.
improve the
capacity
threshold
of system
physical
channel
service
quality
but
affect
the
If
the
parameter
value
is
but
affect
the
service
quality.
BER less than or equal BER
system
larger,
itcapacity.
is
difficult
If the parameter
value
isto
target
in
themore
uplink
outer
loop
increase
the
smaller,
it
is
more
easier
to
power
control
BER
based
Function:
This parameter
it will
increase
the
SIRtarget.
algorithm.
indicates
thesystem
BER target
for a
improve
the
capacity
Accordingly,
it will
improve
the
Related
Factor:
service
physical
channel
out
Valid
but
affect
the service
quality.
service
quality
but
affect
the
quality,
system
capacity.
Time
Windows when
the
FP
If
value
is
system
capacity.
If the
the parameter
parameter
value
is
Mode
is
normal,
which
is
the
smaller,it itisismore
moredifficult
easierto
to
larger,
base
of
outerloop
power
Function:
This
parameter
increase
the
decrease
theSIRtarget.
control
method
using
physical
indicates
the
BER
target
forthe
a
Accordingly,
it
will
improve
it will
channel
BER.
physical
channel
in
Valid
service
quality
but
affect
the
improve
the service
quality
Related
Factor:
service
Time
Windows
when
the FP
system
capacity.
but
affect
the
system
quality,issystem
capacity.
mode
silent,
which
is
the
capacity.
If
the of
parameter
value
is
base
outerloop
power
Function:
parameter
If
the parameter
value
isto
larger,
itmethod
isThis
more
easier
control
using
physical
indicates
the
step
size
fo to
the
smaller,
it
is
more
easier
decrease
the
channel
BER.
downlink
inner
loop
power
decrease
the
SIRtarget.
it will
Related
Factor:
service
control.
Accordingly,
it will
improve
the
improve
the
system
capacity
quality,
system
capacity.
Related
Factor:
service
system
capacity
but
affect
the
but
affect
the service
If
the
parameter
valuequality.
is
quality,
system
service
quality. capacity
If
the parameter
value
isto
larger,
it
is
more
easier
If
the parameter
value
is too
smaller,
it
is
more
difficult
to
decrease
the
large,
the
power
will
be
decrease
the
SIRtarget.
will
decreased
too
lower
toitaffect
Accordingly,
it will
improve
the
improve
the
system
capacity
the
service
quality
and
the
service
quality
but
affect
the
but affect
the
service quality.
power
will
be increased
too
system
capacity.
If
the parameter
value
is
higher
to waste the
power
smaller,
is more difficult
to
resourceitaffecting
the system
decrease
the
SIRtarget.
capacity.
Accordingly,
it willvalue
improve
the
If the parameter
is too
service
quality
but
affect
the
small, the power will be
system capacity.
decreased
too slow to waste
the power resource affecting
the system capacity and the
power will be increased too
slow to affect the service
quality.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
Yes
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
uplink inner loop power

control.
quality, system capacity
large, the power will be
decreased too lower to affect
the service quality and the
power will be increased too
higher to waste the power
resource affecting the system
capacity.
Function:
This
is a
Function:
This parameter
parameter
If
the parameter
value
is too
configuration
Index
which
indicates
which
uplink
inner
small, theapower
be
indicates
set
of will
service
loop
power too
control
decreased
slowalgorithm
to waste
related
power
control
is
used.
For
algorithm
1 inner
the
power
resource
affecting
parameters.
loop
power
control
is
done
the system capacity and the
every
time
slot.
For algorithm
power
willThis
be
increased
too
Function:
parameter
2
inner
loop
power
control is
slow
to
affect
the
service
indicates
the5 step
done
every
time of
slots.
quality.
decreasing
the uplink
SIR
Related Factor:
wireless
target.
scenario.
Related
Factor:1"
the
service
The "algorithm
will
be suit
quality,
the
system
capacity
for the quick
channel
fading
Function:
This
parameter
If
the parameter
wireless
scenario;
indicates
the stepvalue
of is too
large,
the
SIRtarget
The
"algorithm
2"
will
bebe
suit
increasing
the
uplinkwill
SIR
Parameter
Function:
This
decreased
too
lower
to
affect
for
the
slow
channel
fading
target.
parameter
indicates
the
the service
quality;
wireless
scenario.
Related
Factor:
the
service
maximum
step
of
decreasing
If
the parameter
value
is too
quality,
theSIR
system
capacity
the
uplink
target.
small,
the
SIRtarget
will
The
ofRule:
this
If
thefunction
parameter
value
isbe
too
Configuration
It
needs
decreased
too
slow
to
waste
parameter:
This
parameter
large,
the
SIRtarget
will
be
to
consider
the service
quality
the
powerthe
resource
affecting
indicates
support
type
of
increased
too
higher
to
waste
and
the
system
capacity
the
system
capacity;
RLC
PDU
size
format
for
the
power
resource
affecting
If
the
parameter
value
is too
signaling
service.
the
system
capacity;
large,
the and
uplink
SIR target
(Flexible
Size
or value
Fixedwill
Size)
If
the parameter
is
too
decreasing
accuracy
be
The
involved
factor
for
setting
small,
the
SIRtarget
will
be
Function:
This
parameter
too low. Accordingly it will
this
parameter:
UEthe
capability;
increased
too slow
to
affect
indicates
cell
affect
the whether
demodulation
traffic
performance
the
service
quality;
supports
the
uplink
enhanced
performance, and it will affect
Influence
ofquality.
this or
parameter:
layer
2 function
not.
the service
This
parameter
indicates
the
Related
Factor: Cell
If the parameter
value is too
support
type
of
RLC
PDU
throughput.
small, the uplink SIR target
size
formatenhanced
for signaling
and2
The
uplink
decreasing
rate
will belayer
too
Function:
Uplink
service.For
traffic,
Flexible
function
can
improve
the
cell
slow.
Accordingly
it will affect
conversational
service
Size
can
reduce
the
uplink
throughput.
It'sMAC
the
system
capacity.
maximum
MAC-d
PDU
head
cost
and
improve
the
suggested
to be
set
to size
When
SwchAdaptiveStep=0,
extended
Iub
throughput;
For
signalling,
"support"
as soon
as the
this
parameter
isThe
invalid.
Related
Factor:
header
Fixed
Size
is
suggested
to
equipment
supports.
consumption
and
the
quality
use for little
MAC head
cost.
Function:
Uplink
of
service. for service
Suggestion
setting this
conversational
The
value
of
the
parameter
parameter:
This
minimum MAC-dparameter
PDU size is
larger,
thethe
header
indicates
support type of
extended
consumption
smaller,
RLC PDU
sizeisformat
forand it
Related
Factor:
The header
saves
resources;
but
it
is
signaling
and
service.
Traffic
consumption
and
the quality
Function:
Uplink
noneasier
to
result
in
PDU
is
suggested
set to Flexible
of
service. toservice
conversational
transmission
mistake
when is
Size,
for
Flexible
Size
The
value
of
the
maximum
MAC-dparameter
PDUcan
size
the
radio
channel
quality
reduce
the
MAC
head
cost
larger, the header
extended
becomes
bad.
and
improve
the
Iub header
consumption
is smaller,
and it
Related
Factor:
The
value
ofFor
theThe
parameter
is
throughput;
signalling,
saves
resources;
but
it
is
consumption
and the quality
smaller,
the
header
Fixed
Size
is suggested
easier
to result
in PDU to
of
service.
consumption
is larger,
and
it's
use
for
little
MAC
head
cost.
transmission
mistake
when
The
value
of
the parameter
is
a
waste
of
resources.
(Flexible
Size
is
only
for
the
radio
larger,
thechannel
header quality
traffic,
andbad.
signalling
canand
onlyit
becomes
consumption
is smaller,
use
Fixed
Size
in
3GPP
The
value
of
the
parameter
saves resources; but it is is
Release
9result
orheader
later.)
smaller,
easier tothe
in PDU
consumption
is larger,when
and it's
transmission mistake
a
waste
of
resources.
the radio channel quality
becomes bad.
The value of the parameter is
smaller, the header
consumption is larger, and it's
a waste of resources.
conversational service
minimum MAC-d PDU size
extended
Related Factor: The header
consumption and the quality
of service.
larger, the header
consumption is smaller, and it
saves resources; but it is
Function:
This parameter
easier to result
in PDU
indicates
whether
the when
transmission
mistake
adjacent
cell
supports
the
the radio channel quality
uplink
enhanced
layer
2
becomes bad.
function
orof
not.
The value
the parameter is
Related
Factor:
the
smaller, the
header
configration
cellit's
consumptionofisadiacent
larger, and
for
the support
of uplink
a waste
of resources.
enhancced layer 2 function.
Invalid parameter
Fixed-keep
monitoring
No
N/A
Fixed
No
Yes
Don't Care
No
N/A
Don't Care
No
N/A

current SW version
Don't Care
No
N/A

current SW version
Don't Care
No
N/A

current SW version
Don't Care
No
N/A

current SW version
Don't Care
No
N/A

current SW version
Don't Care
No
N/A

current SW version
Don't Care
No
N/A
Fixed-keep
monitoring
No
YES
Parameter Function: This

parameter indicates whether
uplink outer loop power
This
parameter
is not used
control
(OLPC) based
on in
current
SW
version
SIRtarget adaptive down step
size is used or not.
to consider service quality
and system capacity.
If the switch is on, SIR target
decrease would be rapidly
when service quality is good,
and system capacity would
be increased.
If the switch is off, SIR target
decrease step is fixed, and
service quality is relative
good.
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: Cell Counting

Switch.
recommended configuration
is "1", it can select P-T-P or
P-T-M based on the counting
result
andCell
make
the
Function:
Identity.
distribution
of
resources
more
Configuration Rule: CId of
rational.
of
differentCell
cells
of the same
Function:
Identity.
RNC
should
be
different.
Configuration Rule: CId of
different cells
of the volume
same
Function:
UE traffic
RNC
should beconfiguration
different.
measurement
Adjustment
Suggestion:
CId
number for DCH,
used for
of
different
cells
of
the
same
RNC
shouldforbeUE
different.
configured
traffic
volume event
measurement
Function:
UE traffic
volume
for
DCH.measurement
periodic
Configuration
Rule: It must
configuration number
for
meet
the
restriction
DCH, used for indexing a set
conditions.
of parameters configured for
Adjustment
Suggestion:
It
UE traffic volume
periodic
Function:
plane
traffic
must meetUser
the for
restriction
measurement
DCH.
volume
measurement
conditions.
Configuration
Rule: It must
for
meet
the
restriction
conditions.
Adjustment
Suggestion:
It
user planeUser
traffic
volume
Function:
plane
Traffic
must meet the for
restriction
measurement
DCH.
volume
measurement
conditions.
Configuration
Rule: It must
for Emeet
the
restriction
conditions.
Adjustment
Suggestion:
It
user planeUser
Traffic
volume
Function:
plane
traffic
must meet the for
restriction
measurement
E-DCH.
volume
measurement
conditions.
Configuration
Rule: It must
for
meet
the
restriction
FACH,
used
for
indexing
a set
Function:
User plane traffic
conditions.
of
parameters
configured
for
volume
measurement
Adjustment
Suggestion:
It
user plane traffic
volume
configuration
number
for
must meet the for
restriction
measurement
FACH.
interactive
or background
conditions.
Configuration
Rule:
It must
service on HS-DSCH,
used
meet
the
restriction
for indexing a set of
conditions.
parameters configured for
Adjustment
Suggestion:
It
user planeUE
traffic
volume
Function:
volume
must meet thetraffic
restriction
measurement
for
interactive
event
measurement
conditions.
or
backgroundnumber
servicefor
on HSconfiguration
DSCH.
RACH, used for indexing a
Configuration
Rule:configured
It must
set of parameters
meet
the
restriction
for UE traffic
volumevolume
event
Function:
conditions.UE traffic
measurement
for RACH.
periodic
measurement
Adjustment
Suggestion:
It
Configuration
Rule: It must
configuration
number
for
must
meet
the
restriction
meet
the
restriction
RACH,
used
for indexing a
conditions.
conditions.
Adjustment
It
for UE trafficSuggestion:
volume periodic
must meet the for
restriction
measurement
RACH.
conditions.
Configuration Rule: It must
conditions.
Adjustment Suggestion: It
must meet the restriction
conditions.
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Function: User plane traffic

volume measurement
configuration number for
streaming service on HSDSCH, used for indexing a
for user plane traffic volume
measurement
streaming
Function: Userfor
plane
service
on
HS-DSCH.
Function:
of CS voice
throughputSwitch
measurement
Configuration
Rule: It must
over
HSPA. number
configuration
for Emeet
restriction
Configuration
DCH, the
used
forRule:
E-TTI
conditions.
To
turn on the function can
Switching.
Adjustment
It
improve
the Suggestion:
system
Configuration
Rule: Itvolume,
must
Function:
Quality
must
meet
the restriction
but
it also
decreases
the
meet
the restriction
Measurement
for it is
conditions.
quality
of voiceSwitch
services,
conditions.
VoIP/
CS
Voice.
suitable
for
high
system
Adjustment Suggestion: It
Configuration
volume
scene.
must meet
theRule:
restriction
Because
HSPA
uses the
To
turn
off
the
function
can
conditions.
high-level
modulation,
antiprovide better quality ofitsvoice
jamming
capability
is
worse
services, itCisTraffic
suitable
for
Function:
Rate
than
DCH.
middle
or low
system
Threshold
Used
for volume
To
turn on theNRT
function,
the
scene.
Determining
PS Rate
channel
switching
from HSPA
The function
is controled
by
Upper
Limit.
to
is allowed
when
the is
theDCH
license.
This
parameter
Configuration
Rule:
It needs
channel
quality
is bad,toof
it can
configured
according
to
consider
the quality
C
improve
the
quality
of
voice
whether
the
operator
has
and
I/B
PS
services
when
Function:
Switch
for DCH
services,
but
also
purchased
theit license.
Multi-RABs.
Rate
Adjustment
Based on
decreases
the
system
If the value
of this
parameter
Traffic
Volume
Measurement.
volume,
andthe
it may
is
too large,
rateincrease
of PS
Configuration
Rule:
Function:
Event
4A drop.
Counter
the
risk ratio
of call
services
will
be
allowed
to
To
turn
the
function,,the
Threshold
for
Increasing
Rate
To
turn on
offtothe
function
the
increase
high
rate,
which
system
can
adjust from
the rate
of
on
DCH
or
DCH->HSPA.
channel
switching
HSPA
will
influence
theonCS
service's
services
based
traffic
Configuration
Rule: It needs
to
DCH is not allowed
when
quality.
volume
measurement,
and it
to
consider
the
user
the
channel
quality
is
bad.
If it isimprove
too small,
rate of
can
the the
effect
experiences
and
utilization
PS
services
willofbe
limited to
utilization
ratio
radio
ratio
ofrate,
radio
resource.
a
low
which
will
resources.
Function:
Event
4B
Counter is
The
valuethe
of this
parameter
influence
user
To
turn
off
the
function,
Threshold
for
Decreasing
smaller,
the response tothe
experience.
system
can't
rate
Rate
on
DCH.
user's need
isadjust
faster,the
and
it of
services
based
on
traffic
Configuration
Rule:
It needs
will
be easier
to
trigger
rate
Function:
Switch
for switch,
DLand
DCH
volume
measurement,
to
consider
the
user
increase
or
channel
Function:
Wait
timer
for
Rate
Adjustment
Based
on
the
effect
utilization
ratio
of Dexperiences
andinutilization
but
it may rate
result
a waste
decrease
ofisuplink
andof
TCP.
radio
resources
low.
ratio
of
radio
resource.
radio
resource.
downlink
reconfiguration
by is
Configuration
Rule:
The
value
of
this
parameter
The
value
ofcan
this
parameter
is
one
step,
it
reduce
the
To
turn
on
the
function,
when
smaller,
it will
be easier
to
larger,
the
response
to
user's
times
of reconfiguration.
the
D-TCP
is
very
the
trigger
decrease,
and
it
need
israte
slower,
andhigh,
itIt will
be
Configuration
Rule:
needs
system
can
reduce
the
will
influence
user
more
difficult
to
trigger
rate
to
consider
theoftimes
of
downlink
rate
services
experiences.
increase
or
channel
switch, it
reconfiguration
and
utilization
based
D-TCP,
and
it can
The
value
of this
parameter
is
will
influence
the
user
ratio
ofitradio
resource.
decrease
the
risk
of
call
larger,
will
be
more
difficult
experiences.
The
value
of
this
parameter
drops,
butrate
it will
make
the
to trigger
decrease
and is
larger,
it
will
be
easier
to
user
experience
become
the user experiences is bad.
trigger
uplink
downlink
To
turnbut
off itthe
function,
better,
isand
easier
to the
result
reconfiguration
by one
system
can't
thestep,
in a waste
of reduce
radio
resource.
and
reduce
the
of
downlink
rate
oftimes
services
Function:
DRBC
Method
reconfigurations,
but
the
based D-TCP, it doesn't
Switch.
response
to user's
influence the
user traffic
Configuration
Rule:
need
is also but
slower,
so it will
experience,
it may
To
turn
on
the
function,
it can
be
more
difficult
to
rate
increase the risk
of trigger
call drop
realize
the
dynamic
decrease,
and
it
will
influence
when the user'channel quality
adjustment
radio
resource,
the
utilization
radio
is very
bad .of of
and
it can improve the effect
resources.
utilization
resources.is
The value of
of radio
this parameter
To
turn
off
the
function,
it
smaller, it will be more difficult
can't
realize
the and
dynamic
to trigger
uplink
downlink
adjustment
of radio
resource,
reconfiguration
by one
step,
and
utilization
of
and the
the effect
response
to user's
radio
is low.
traffic resources
need is also
faster, so it
is easier to trigger rate
decrease, the utilization of
radio resource is high.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Rate on DL DCH Based on

D-TCP.
Configuration
Rule:
It needs
Function: Event
B Counter
to
consider
the
user
Threshold for Restriction
experiences
andtime
ratio
call
Function:
IncreasingDelay
Rate
on
DLofDCH
drops. on of
threshold
D/D->HS/D or
Based
D-TCP.
The
value
this
parameter
HS/E
after of
HS/D
or
HS/E
Configuration
Rule:
It needs is
smaller,
it
will
be
easier
to
->D/D
triggering
by channel
to consider
the user
trigger
rate
decrease
based
quality.
experiences.
on
and
it also
will beis
Configuration
Rule:
It needs
TheD-TCP,
value of
this
parameter
easier
to
result
in
to
consider
the
user
smaller, it Event
will be4B
easier
to
Function:
Counter
unnecessary
rate
decrease
experiences
and
the
ratio of
trigger
ratefor
increase
based
Threshold
CELL_DCH
toon
and
influence
user
call
drops.
traffic
volume
measurement,
Idle.
experiences.
The
of this
parameter
but itvalue
also will
be
easier
to is
Configuration
Rule:
It needs
The
value
of
this
parameter
is
smaller,
it
will
be
easier
to
result
in ping-pong
to
consider
the user
larger,
it
will
be
more
difficult
trigger
HS/D
or
HS/E->D/D
adjustment with
experiences
andrate
the
to
trigger
based
on rate
traffic
decrease
based
on
D-TCP
utilization
ratiodecrease
ofvolume
radio
based
onofD-TCP,
but
it may
measurement
after
HS/D
or
because
power
fluctuation.
resources.
Function:
Event
4B
Counter
increase
the
risk
of
call
drops.
HS/E->D/D
based
on channel
The
value
of
this
parameter
is
Threshold
for
CELL_DCH
quality,
but
itbe
also
will difficult
beto to
larger,
it
will
more
smaller,
it
will
be
easier
PCH.
easier
to
result
in
ping-pong
to
recover
fromRule:
status
of high
trigger
CELL_DCH->Idle
Configuration
Itofneeds
Function:
Event
4B
Counter
adjustment
because
the
transmit
power,
so
it
will
be
based
on
traffic
volume
to
considerfor
the
user
Threshold
HS-DSCH/Efluctuations
of
channel
more
difficult
to
trigger
rate
measurement,
and
the
experiences
and the to PCH
DCH
Using
DTX/DRX
quality;
And
the
increase
on
traffic is
release
ofbased
radio
resource
utilization
ratio
of
radio
Shared
by
Uplink
and
reconfiguration
inalso
bad will
volume
measurement
andbe
also
faster,
but
it
resources.
Downlink.
channel
quality
willping-pong
increase
influence
user
experiences.
easier
to
result
in
The
value
of this
parameter
is
Configuration
Rule:
Itofneeds
the
risk
of call
drops.
adjustment
because
the
smaller,
it
will
be
easier
to
to
consider
user
The
value ofthe
parameter
is
fluctuations
ofthis
traffic
volume,
trigger
CELL_DCH->
PCH
experiences
and
the
larger,
it
will
be
more
difficult
and
it will
increase
the Uu
based
on HS/D
traffic
volume
utilization
ratio of
radio
to
trigger
or
HS/E->D/D
Function:
Event
4A
Counter
signalling
load;
measurement,
and
the
resources.
based
on traffic
volume
Threshold
for
CELL_FACHThe
value
of
this
parameter
is
release
of of
radio
resource
is
The
value
this
parameter
measurement
after
HS/D
or is
>CELL_DCH.
larger,
it
will
be
more
difficult
also
faster,
but
it easier
also
will
smaller,
itCELL_DCH->Idle
will
be
tobe
HS/E->D/D
based
on
Configuration
Rule:
It channel
needs
to
trigger
easier
to
result
in
ping-pong
trigger
HS-DSCH/E-DCHquality,
and
influence
user
to
consider
the
user
based
on
traffic
volume
adjustment
because
of the
>PCH
based
on
traffic
experiences.
experiences
and
utilization
measurement,
and it volume;
is also
fluctuations
of traffic
volume
measurement,
andof
ratio
oftoradio
resource.
easier
result
inparameter
a waste
The
value
of
this
is
the
release
of
radio
resource
The
value
ofbe
this
parameter
is
radio
resource
and
influence
larger,
it
will
more
difficult
is
also
faster,
but it of
also
can't
smaller,
the
response
to
the
utilization
ratio
radio
to
trigger
CELL_DCH->
PCH
Function:
Event
4B
make
best
ofisDTX/DRX;
Function:
Switch
of Counter
user's
need
faster,
and it
resources.
based
on
traffic
volume
Threshold
for
CELL_FACH
The
value
of to
this
parameterto
is.
Transferring
CELL_FACH
will
be
easier
toand
trigger
measurement,
influence
Idle.
larger, it will beRule:
more
difficult
Configuration
CELL_FACH->CELL_DCH
the
utilization
of radio
Configuration
Rule:
needs
to
trigger
HS-DSCH/E-DCHTo
turn
on
theratio
function,
it can
channel
switch,
but itIt may
resources.
to
consider
the
user
>PCH
based
on
traffic
make
CELL_FACH
use for
result in
a waste of radio
experiences
volume
bear
themeasurement,
low and
rate the
traffic,it itcan
can
resource.
utilization
ratio
of
radio
make
best
of
DTX/DRX,
the
save
dedicated
resource,
but
Function:
Event
4B
Counter
The value of this parameter is
resources.
is good,
butto
ituser
mayexperience
also
increase
theuser's
risk
Threshold
for
CELL_FACH
larger,
the response
to
The
value
ofbecause
parameter
thecall
release
ofthis
radio
of
there
isis
PCH.
need
isdrop
slower,
and
itresource
will be
smaller,
it
will
be
easier
to
is
slow,
and
it
will
influence
no
power
control
in It needs
Configuration
Rule:
more
difficult
to
trigger
trigger
CELL_FACH->Idle
the
utilization
ratio
CELL_FACH
state.
to
consider
the
userof radio
CELL_FACH->CELL_DCH
based
traffic
resources.
To
turnon
off
theand
function,
experiences
the
channel
switch,
itvolume
will it
measurement,
and
can't
make
CELL_FACH
utilization
ratio
of
radio
influence the user the use
release
radio
resource
is ,
for
bear of
the
low rate
traffic,
resources.
experiences.
Function:
HS/D->D/D
or
also
faster,
but
it
also
will
be
and
the
effect
utilization
of is
The
value
ofBased
this
parameter
HS/E->D/D
on Quality
easier
toitresult
iniseasier
ping-pong
radio
resources
low.
smaller,
will
be
to
Measurement
Switchofforthe
I/B
adjustment
because
trigger
CELL_FACH->PCH
Traffic.
fluctuations
of traffic
volume;
based on the
traffic
volume
Because
HSPA
uses theis
The value of this
parameter
measurement,
and
the
high-level
modulation,
its antilarger,
itof
will
be more
difficult
release
radio
resource
is
jamming
capability
is
worse
to
trigger
CELL_FACH->Idle
also
faster,
but
it
also
will
be
than
DCH.
based
onresult
trafficinvolume
easier
to
ping-pong
To
turn
on the function,
the
measurement,
and it of
is the
also
adjustment
because
channel
switching
from
HSPA
easier
to result
in a waste
of
fluctuations
of traffic
volume;
to
DCH
is allowed
when
the
radio
resources
and
influence
The
value
of
this
parameter
channel
quality
is bad,
it canis
the
utilization
ratio
of difficult
radio
larger,
it
will
be
more
improve
the quality of
resources.
to
trigger CELL_FACH->PCH
services,
but it also
based
on traffic
volume
decreases
the system
measurement,
and
volume, and it may influence
increase
the risk
utilization
radio
the
ratio ofratio
callof
drop.
resources.
To turn off the function , the
channel switching from HSPA
to DCH is not allowed when
the channel quality is bad.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: Initial Rate of DL

DCH.
to consider the user
experiences and the
utilization Initial
ratio ofRate
radio
Function:
of UL
resources.
DCH.
The
value of this
parameter
Configuration
Rule:
It needs is
smaller,
the
initial
rate
to consider the user of DL
DCH
is also
lower,
and the
Function:
Max
CSthe
Delay
experiences
and
user
experience
is
worse;
when
CS
over
HSPA.
utilization ratio of radio
The value of this
parameter
Configuration
Rule:
It needs is
resources.
larger,
the of
initial
rate
ofofDL is
to
consider
the
quality
The
value
this
parameter
DCH
is
also
higher,
and
service
.
smaller, the initial rate ofthe
UL
user
experience
better,
This
isisused
to and
DCHparameter
is also lower,
and the
Function:
Time Threshold
ituser
is also
easier
toisresult
in for
a
help
UE
managing
the deexperience
worse;
CELL_PCH
or
URA_PCH
to
waste
of
radio
resource
and
jitter
buffer.
Idle.
the
increase
system
If
the
value
ofofthis
parameter
larger,
theSwitch
initial
rate
of load.
UL
Function:
of
Configuration
Rule:
is
too islarge,
the
timeand
of the
DCH
also
higher,
the
URA_PCH/CELL_PCH
The
value
of this isparameter
is
maximum
buffering
of the and
user
experience
better,
Support.
larger,
the
time
of
camping
on
voice
frames
in
PDCP
is
itConfiguration
is also easierRule:
to result in a
PCH
isofbut
longer
when
there
is
longer,
because
CS
waste
radio
resource
and
Turn
onisthe
function,
thefor
UE
no
data,
For
the
frequent
sevice
very
sensitive
the
increase
of
system
load.
can
be
transferred
toand
PCH
services
to itbecan't
setup
time
delay,
guarantee
Function:
NRT
PS
Traffic
state
when
there
is
no
data
released
scene,
it
will
save
the
qualityRate
of CS
service.
Downlink
Upper
Limit
transmission,
and
RRC
signaling
resource
because
If
the value
of
thisCparameter
When
High setup
Rate
Traffic+is
connection
process
RRC
connection
setup
is
too
small,
the
time
of the
PS
Traffic.
no
need
when
there
data
process
is buffering
no need. ofis the
maximum
Configuration
Rule:
It is needis
transmission.
For
the
The
value
of
this
parameter
voice
frames
in quality
PDCP of
is C
to
consider
the
frequent
services
toTraffic
be setup
Function:
NRT
PSof
smaller,
the
time
camping
shorter.
and
I/BRate
PS
services
when
and
released
scene,
to itturn
Uplink
Upper
Limit
on PCH
is shorter,
and
is
Multi-RABs.
on
the
function,
it
will
save
When
High Rate
C Traffic+
more easier
to enter
Idle
If
the
valueRRC
of this
parameter
radio
resource
of
Uu
PS
Traffic.
stae,
and
connection
is
too large,
PS
interface,
butthe
there
is
Configuration
Rule:
ItofCell
iswhen
need
setup
process
israte
need
services
will
be
allowed
toC
Update
in
PCH
state.
to
consider
the
quality
of
new
service
to
be
triggered.
Function:
PS
Traffic
increase
toNRT
high
rate,
which
Turn
off PS
the
function,
the
UE
and
I/B
services
when
Downlink
Rate
Upper
Limit
will
influence
the
high
rate
CS
can't
be
transferred
to
PCH
Multi-RABs.
When
Low
Rate C Traffic+
service's
quality.
state
when
there
is
no
data
If the
value of this parameter
PS
Traffic.
If
ittoo
is too
small,
theit rate
of
transmission,
and
be
is
large,
the
rate
ofisPS
Configuration
Rule:
Itwill
need
PS
services
will
bestate,
limited
to
transferred
to
Idle
services
will
be
allowed
to
to
consider
the PS
quality
ofand
C
Function:
NRT
Traffic
a
low
rate,
which
will
RRC
connection
setup
increase
to services
high rate,
which
and
I/B
PS
when
Uplink
Rate
Upper
Limit
influence
the
user
process
is
need
when
thereCS
is
will
influence
the
high
rate
Multi-RABs.
When
Low
Rate C Traffic+
experiences.
data
transmission.
service's
quality.
Adjustment
Suggestion:
PS
The
If the
it Traffic.
isrecommended
too small,
theparameter
rate of
If
value
ofshould
this
Configuration
Rule:
Itsatify
is need
configuration
the
PS
services
will
be limited
is
too
large,
the
rate
of of
PSCto
to
consider
the
quality
condition
a
low rate,
which
will
services
will
bedownlink
allowed
to
Function:
The
and
I/B PS
services
when
DlPsRateLmtHighC<DlPsRat
influence
the
user
increase
to
high
rate,
which
maximum
bit
rate
threshold
Multi-RABs.
eLmtLowC.
experiences.
will
influence
the
low rate CS
for
I/B
service
being
Adjustment
Suggestion:
The
recommended
service's
quality.
established
onthis
CELL_FACH.
If
the
value
of
parameter
configuration
should
satify
If
ittoo
is too
small,
the The
rate
of the
Configuration
Rule:
is
large,
the
rate
of PS
condition
PS
services
will
be is
limited
CELL_FACH
state
mainly
services
will
be
allowed
to to
Function:
The
uplink
UlPsRateLmtHighC<UlPsRat
a
low
rate,
which
will
used
for
bear
the
low
rate
increase
tobithigh
which
maximum
raterate,
threshold
eLmtLowC.
influence
thesave
user
traffic,
it can
dedicated
will I/B
influence
the
low
rate CS
for
service
being
experiences.
resource.
service's
quality.
established
on CELL_FACH.
The
recommended
value
of this
parameter
If
it
is
too
small,
the
rate of is
Configuration
Rule:
The
configuration
should
satify
the
smaller,
the traffic
more
PS services
will
beisis
limited
to
CELL_FACH
state
mainly
condition
difficult
to
be
established
on
a low for
rate,
which
used
bear
the will
low rate
DlPsRateLmtHighC<DlPsRat
CELL_FACH,
and dedicated
the user
influence
thesave
user
traffic,
it can
eLmtLowC.
experience
is
better,
but it is
experiences.
resource.
also
easier
to
result
in
a
The recommended
value of this parameter
is
waste
of
radio
resource.
configuration
should
satify
smaller, the traffic is more the
The
value
of this
parameter
condition
difficult
to be
established
on is
larger,
the traffic
is the
easier
UlPsRateLmtHighC<UlPsRat
CELL_FACH,
and
userto
be
established
on but it is
eLmtLowC.
experience
is better,
CELL_FACH,
and
can
also easier to resultit in
a
make
best
of
common
waste of radio resource.
resource,
the parameter
user
The value but
of this
is
experience
is also
larger,
the traffic
is worse.
easier to
be established on
CELL_FACH, and it can
make best of common
resource, but the user
experience is also worse.
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Function: HS/D->D/D or
HS/E->D/D Based on Quality
Measurement Switch for S
Traffic. Switch of
Function:
Configuration
Rule:
supporting SRB
on E-DCH.
To
turn
on
the
function
can
Function:
Event
4B Counter
Configuration
Rule:
improve
the
quality
of
Threshold
for
Cell_Dch
to
To turn on the function, the
services,
but
it
also
Cell_FACH.
signaling service can be
decreases
system
Configuration
It needsit
establishedthe
onRule:
the E-DCH,
volume.
to
consider
the channel
user
can
save DCH
To
turn off theand
function
experiences
the can
resource..
improve
the
system
volume,
utilization
ratio
of
radio
To turn off the function,
only
but
it
also
decreases
the
resources.
when the minimal
SFDL
is DCH
Function:
Switch for
quality
of services.
The
value
of this
parameter
is
2SF2+2SF4,
the
signaling
Rate
Adjustment
Based
on DFunction:
Wait
timer
for to
smaller,
it
will
be
easier
service
can
beofestablished
TCP.
Function:
Switch
of Nonand on
increase
rate
uplink
trigger
Cell_DCH->Cell_Fach
the
E-DCH.
Configuration
Rule:
Emergency
CS
Service
downlink
reconfiguration
by
based
on
volume when
The
function
isfunction,
controled
by
To
turn
on
the
Access
to ittraffic
CELL_FACH
On
one
step,
can
reduce
the
measurement,
and
the
license.
This
parameter
is
the
D-TCP
is
very
high,
the
RRC
times
of of
reconfiguration.
release
radio
resource
is
configured
according
to
system
can
reduce
the
Configuration
Rule:
It
needs
Configuration
Rule:
It needs
also
faster,
but
also
will be
whether
the
operator
has
downlink
rate
ofituser
services
to
consider
the
to
consider
the
times
of
easier
to
result
in
ping-pong
purchased
the
license.
based
D-TCP,
can
experience
andand
theituser's
reconfiguration
and
adjustment
because
of the
decrease the
riskofofRRC
call
successful
ratio
experiences.
fluctuations
of
traffic
volume;
drops,
but
it
will
make
the is
connection.
The
value
of
this
parameter
The
value
of
this
parameter
is
user
experience
become
The
reason
of
adding
the
larger,
itit will
be
easier
to bad.
larger,
will
be
more
difficult
To
turn uplink
off the
function,
theif
parameter
is for
IPHONE,
trigger
and
downlink
to
trigger
Cell_DCH
system
can't
reduce
the
RRC
is
established
on
the
reconfiguration
by one
step,
Function:
Maximum
Bittraffic
Rate
->Cell_Fach
based
on
downlink
rate
oftimes
services
Cell_FACH
state
for
IPHONE,
and
reduce
the
of
of
HSDPA
Across
Iur
volume
measurement,
and
D-TCP,
it doesn't
itbased
will have
noise
voice
when
reconfigurations,
but the
Interface
influence
the
utilization
ratio
influence
the
user
itConfiguration
triggers a
service
and
response
toCS
user's
traffic
Rule:
It needs
of
radio
resources.
experience,
but
it
may
transfers
from
Cell_FACH
to
need
is also
slower,
to
consider
the
user so it will
increase
the risk to
of trigger
call drop
Cell_DCH.
be more difficult
rate
experience.
when
the
quality
To
turn
onuser'channel
the
if the
increase,
and
itfunction,
willnot
influence
Iur
interface
does
inform
is
very
bad
.
admission
for
RRC
user's experiences.
the maximum
bit rate of
connection
DCH
is failed,
Function:
Switch
of
CS
The
value
ofonthis
parameter
HSDPA
traffic
to
DRNC.
To is
RRC
connection
is
allowed
to
64kbps
Establishment
in
smaller,
it
will
be
more
difficult
add this parameter
used
Function:
MaximumisBit
Rateby
be
established
on
the
external
UTRAN
cell.
to
trigger
uplink
and
downlink
DRNC
to
calculate
and
adjust
on DL DCH for NRT PS RAB
Cell_FACH
state,
itstep,
can
Configuration
Rule:
The
video
reconfiguration
byand
one
the
maximum
available
code
in
External
UTRAN
Cell.
increase
the
successful
ratio
service
of
CS
64kbps
occupy
and the response
toItuser's
resource
of HS-PDSCH.
Configuration
Rule:
needs
of
RRC
connection,
but it soisit
many
resources,
it faster,
can
traffic
need
isthe
also
The
value
ofthe
parameter
to
consider
transmission
can't
avoid
the
noise
voice
control
the
access
of
video
is
easier
to
trigger
rate
larger,
theMaximum
maximum
bit
ratefor
bandwidth
of Iub, theBit
user
Function:
Rate
IPHONE.
service
by
the
switch.
To
turn
increase,
the
user's
of
HSDPA
traffic
across
Iur
experience
and
the
on
E-DCH
for
NRT
PSservice
RAB
To
turn
off
the
function,
if
on
the
function,
video
experiences
is
good.
interface
is
higher,
and
the
successful
call
ratio.Cell. the
in
External
UTRAN
admission
for
RRC
is
allowed
toofaccess,
andisthe
HSDPA
user
experience
The
reason
the adding
of
Configuration
Rule:
Itisneeds
connection
on
DCH
failed,
user
experience
isused
good,
but
better,
but
it
is
also
easier
to
this
parameter
is
for
the
to
consider
the transmission
emergency
RRC
itonly
occupies
many
radio
influence
R99
user
scene
of
very
limited
bandwidth
of
Iub,
theBit
user
connection
is bandwidth
allowed
toRate
beIub
Function:
Maximum
resources.
experience.
transmission
of
experience
and
the
established
on
the
on
UL
DCH
for
NRT
PS
RAB
To
turn
off
the
function,
video
The
value
of
the
parameter
to
avoid many
users'
bad is
successful
call
ratio.
Cell_FACH
state,
and
itbitwill
in
External
UTRAN
Cell.
service
is
not
allowed
to
smaller,
the
maximum
rate
user reason
experiences
because
The
of
the
adding
ofof
decrease
the
successful
ratio
Configuration
Rule:
It
needs
access.
of
HSDPA
traffic
across
Iur
some
user's
high
bit
rate
in
this
parameter
is
used
for
the
of
RRC
connection,
it can
to
consider
thedoesn't
transmission
If
the
operator
hope
interface
iscell.
lower,
thebut
HSDPA
the
same
scene
of
very
limited
avoid
the services'
noise
voice
for foris
bandwidth
of this
Iub,
the
user
the
vedio
acess
user
experience
isparameter
worse.
The
value
of
transmission
bandwidth
of Iub
IPHONE.
experience
and
the
some
special
scene,
for
larger,
the
rate users'
to be allowed
to
avoid
many
bad
successful
callthe
ratio.
example,
bathroom,
the
is
higher,
and
user
user
experiences
because
of
The
reason
of
the
adding
of
function
should
be
turned
off.
experience
alsobit
better,
but
some
user'sishigh
rate
in
this
parameter
is
used
for
the
itthe
is same
also easier
to influence
cell. limited
scene
of very
other
users'
traffic
quality. is
The
value of this
parameter
transmission
bandwidth
of Iub
The
value
of
this
parameter
is
larger,
the
rate users'
to be allowed
to
avoid
many
bad
smaller,
the
rate
to
be
is
higher,
and the because
user
user
experiences
of
allowed
is lower,
the but
experience
ishigh
alsoand
better,
some
user's
bit
rate
in
call ratio
is also
itsuccessful
is same
also easier
to influence
the
higher,
butcell.
the
userquality.
other
users'
traffic
The
value ofisthis
experience
alsoparameter
worse. is
The
value
this
larger,
the of
rate
to parameter
be allowedis
smaller,
rate
be
is higher,the
and
thetouser
allowed
is
lower,
and
the but
experience is also better,
call ratio
is also
itsuccessful
is also easier
to influence
higher,
but the
userquality.
other users'
traffic
experience
is
also
worse. is
The value of this parameter
smaller, the rate to be
allowed is lower, and the
successful call ratio is also
higher, but the user
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
YES
No
Function: Maximum Bit Rate

experience
and
on E-DCH for
RTthe
PS RAB in
successful
call
ratio.
External UTRAN
Cell.
The
reason of Rule:
the adding
of
Configuration
It needs
this
parameter
is
used
for
the
to consider the transmission
scene
of
very
limited
bandwidth
of Iub, theBit
user
Function:
Maximum
Rate
transmission
bandwidth
of Iub
experience
and
the
on
UL
DCH
for
RT
PS
RAB
in
to
avoid
many
users'
bad
successful
call ratio.
External
UTRAN
Cell.
user reason
experiences
The
of Rule:
thebecause
adding
ofof
Configuration
needs
some
user's high
bitItrate
inthe
this
parameter
is
used
for
to
consider
the transmission
the
same
cell.
scene
of very
limited
bandwidth
of
Iub,
the user is
The
value of this
parameter
transmission
bandwidth
of Iub
experience
and
the
larger,
the
rate users'
to be allowed
to
avoid
many
bad
successful
callthe
ratio.
is
higher,
and
user
user
experiences
because
The
reason
of
the
adding
ofof
experience
ishigh
alsobit
better,
but
some
user's
rate
in
this
parameter
is
used
for
itthe
is same
also easier
to influencethe
cell. limited
scene
of
very
other
users'
quality. is
The
value
oftraffic
this
parameter
transmission
bandwidth
of Iub
The
value
of
this
parameter
is
larger,
the
rate
to be allowed
Parameter
Function:
Switch
to
avoid
many
users'
bad
smaller,
the
rate
to
be
is
higher,
and the
user
of
AMR
traffic
re-admission
user
experiences
because
of
allowed
is lower,
and
the but
experience
ishigh
also
better,
after
AMR
rate
decrease.
some
user's
bit
rate
in
callRule:
ratio
is also
itsuccessful
is same
also easier
to influence
Configuration
the
cell.
higher,
but
the
user
other
users'
traffic
quality.
Turn
on this
AMR
The
value
ofisswitch,
this
parameter
Function:
Conversational
experience
also
worse. is
The
value
of
parameter
service
will
trythis
to
larger,
the
rate
toaccess
be
allowedis
service
Maximum
MAC-d
smaller,
the
rate
to
be
again
with
the
lowest
is higher,
the user
PDU
Sizeand
Extended
allowed
israte
lower,
and
assigned
after
the
experience
also
better,
but
Configuration
Rule:
It the
needs
Function
of is
this
parameter:
it
call
ratio
is also
access
with
the
maximum
itsuccessful
is
also
easier
to
influence
to consider
the header
indicates
whether
UEs in bit
higher,
but
the
user
rate
be
adopted.
In
this
way,
other
users'
traffic
quality.
consumption
and
the
quality
CELL_FACH
state
will
be
Function
of
this
parameter:
experience
is
also
worse. Itis
AMR
service
has
more
The
value
of
this
parameter
of
service.
counted
or
not. background
indicates
whether
chance
to
setup
call
smaller,
the
rate
to
The
value
of
the the
parameter
Factors
of
consideration:
service
is
carried
bybe
PTP. is
successfully.
allowed
is
lower,
and
the
larger,
the
header
Downlink
Code
Resource,
Factors
of
Function
ofconsideration:
this
parameter:
Turn
offResource,
this
switch,
after
theitit
successful
call
ratio
is
also
consumption
is
smaller,
and
Power
the
uplink
Downlink
Code
Resource,
indicates
whether
UEs
in
access
withowe
theuser
maximum
bit
higher,
but
the
save
resource;
but
it isbeeasier
load
of
Uu
to
the
Power
Resource.
CELL_PCH
state
will
rate
is
adopt,
the
call
of
AMR
experience
is
also
worse.
to
result
in
transmission
responding
of counting.
If
the
MBMS
set
to "open",
counted
or PDU
not.
service
will
beisthe
failure.
mistake
when
If
the operator
turnradio
on
this
background
service
can
be
Factors
of
consideration:
channel
quality
becomes
function,
the
UEs
in the bad.
carried by
PTP
when
Downlink
Code
Resource,
The
value
parameter
is
CELL_FACH
will
decide
tothe
number
of of
UEthe
responding
Power
Resource,
the uplink
smaller,
the
header
respond
the
counting,
so
that
counting/recounting
load
of Uu owe to theis less
consumption
and it's
the
ofiscounting.
user,
which
thannumber
the value
oflarger,
setting,
responding
of
a
waste
of
resource.
used
for
switching
between
otherwise
the
services
can It
If the operator
on this
Function
of
thisturn
parameter:
PTP
andcarried
PTM,
will
be bigger,
only
be
by
PTM.
The
function,
the
UEs
in
indicates
the UEtonumber
then
itmethod
is easier
use the
PTM
can
reduce
the
CELL_PCH
will
decide
to
threshold
used for
switching
PTM
for MBMS
service
and
downlink
code
resource
and
respond
the
counting,
so
that
between
PTP
and
PTM in
will
reduce
the
downlink
code
power
resource.
the
number
of user,
which
order
to
control
the
rate
ofthe
and
power
resource,
but
If
the
MBMS
is
not
used,
this
used
for switching
between
tranfering
between
PTP and
uplink
overload
of
Uu
parameter
is
invalid
PTP and PTM, will be bigger,
PTM.
increase
more
Function
ofconsideration:
thisquickly.
parameter:
then
it isofeasier
to
use the it
Factors
If
the
operator
close
thisinandIt
indicates
whether
UEs
PTM
for
MBMS
service
Function
of
thisand
parameter:
downlink
code
power
function,
the
UEs
in
CELL_PCH
state
will
be code
will
reducewhether
the
downlink
indicates
streaming
resource.
CELL_FACH
will not
to
counted
or
not.
and
power
resource,
but
the
service
is
carried
by
PTP.
The
parameter
is larger,
the
respond
the
counting,
then
it
Factors
of
consideration:
uplink
overload
of
Uu
Factors
of
consideration:
transfer
from PTP
to PTM
is
more
diffuclt
to
use
the
Downlink
Code
Resource,
increase more
quickly.
downlink
code
power
becomes
moreand
difficult
,and
the
PTM
MBMS
service
Power
Resource,
the
uplink
If
the for
operator
close
this
resource.
transfer
from
PTM
to
PTP
will
increase
the
load
ofoperator
Uuthe
owe
todownlink
the
function,
UEs
in
If
the
turn
onrequired
this
becomes
easier,
the
code
and
power
resource,
but
responding
of
counting.
CELL_PCH
will
not
to
function,
streaming
service
code
and
power
resource
will
the
uplink
overload
of
Uu
If
the
turn
onor
this
respond
the counting,
then
it
will
beoperator
carried
in
PTP
PTM
be
more.
increase
more
slowly.
function,
the
UEs
in
is
more
diffuclt
to
use
the
according
to
the
number
of
The
parameter
smaller,
the
If the
MBMS
is is
not
used,
this
CELL_PCH
will
decide
to
PTM
for
MBMS
service
and
UE
responding
the
transfer
from
PTP
tocounting,
PTM
parameter
is
invalid
respond
the
counting,
so that
will
increase
the
this
will make
use,downlink
of the
becomes
easier
the
transfer
the
number
of
user,
which
code
and
power
resource,
but
resource.
If
the
operator
turn
from PTM to PTP becomes
used
for
switching
between
the
uplink
overload
of
Uu
off
this
function,
streaming
more difficult, the required
PTP
PTM,
will
be in
bigger,
increase
more
slowly.
service
will
be carried
PTM,
code and
and
power
resource
will
then
it
is
easier
to
use
the
If
the
MBMS
is
not
used,
this
the
downlink
code
and
power
be less.
PTM
MBMS
service
and
parameter
is invalid
resource
may
less,
but
it
If thefor
MBMS
isbenot
used,
this
will
reduce
the
downlink
code
will
not make
use of the soft
parameter
is invalid
and
power resource, but the
handover.
uplink
overload
of Uu
If the MBMS
is not
used, this
increase
more
quickly.
parameter
is invalid.
If the operator close this
function, the UEs in
CELL_PCH will not to
respond the counting, then it
is more diffuclt to use the
PTM for MBMS service and
will increase the downlink
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
to consider the data

throughput demand, the
utilization
of radio resource
Function: Downlink
Rate
and
the
call
completion
ratio.
Adjustment Level
Number.
Adjustment
Suggestion:
Because
thethe
downlink
to
consider
data
channel
code
is limited,
throughput
demand,
the more
rate
levels
can
guarantee
utilization of radio resourcethe
radio
resource
is more even
and
the
call
completion
ratio.
Function:
Uplink
distribution.
But
ifRate
the rate
Adjustment
Suggestion:
Adjustment
Level.
levels
arethe
too
many, it may
Because
downlink
Configuration
Rule: It needs
result in the
frequently
channel
code
isdata
limited, more
to
consider
the
reconfiguration.
rate
levels
can
guarantee
the
throughput
demand,
Implementation
ofmore
thethe
four
radio
resource
is
even
utilization
of basically
radioRate
resource
Function:
Uplink
levels
could
distribution.
But
if the satisfy
rate
and
the
call
completion
ratio.
Adjustment
Level
Number.
the
user's
throughput
levels
are
too
many,
it
may
Adjustment
Suggestion:
Configuration
Rule:
It
needs
demand,
andfrequently
it can avoidmore
a
resultlevels
in the
rate
can
guarantee
the
to
consider
the
data
waste
of
resource
, the radio
reconfiguration.
radio
resource
is
more
even
throughput
demand,
resource
distribution
isfour
very
Implementation
of
thethe
distribution.
But
if the
rate
utilization
of
radio
resource
rational.
levels
could
basically
levels
are
too
many, itsatisfy
may
and
the
call
completion
ratio.
Function:
Used
for indicating
the
user's
throughput
result
in
the
frequently
Adjustment
Suggestion:
the
type
of
transport
channel
demand,
and it can avoidmore
a
reconfiguration.
rate
levels
canrate
guarantee
the
and
signaling
for
initial
waste
of
resource
,the
the
radio
Implementation
of
three
radio
resource
is
more
even
RRC
connection
setup.
resource
distribution
issatisfy
very
levels
could
basically
distribution.
But
if the
rate
Configuration
Rule:
It
needs
rational.
Function
this parameter:
it
the
user's
throughput
levels
areoftoo
it may
to
consider
theitmany,
utilization
of
indicates
whether
the
release
demand,
and
can
avoid
a
result
in the frequently
radio
resource
and, the
of
PTM
bearer
is call
waste
ofradio
resource
the
radio
reconfiguration.
time
delay.
permitted
or
not
for
a
resource
distribution
isMBMS
very
Implementation
of
the
three
Adjustment
Suggestion:
High
Function:
UE's
Waiting
Time
service.
Factors
of satisfy
rational.
levels
could
basically
rate
signaling
can
effective
of
Sending
Message
consideration:
downlink code
the
user's
throughput
speed
up the
establishment
"Signaling
Connection
and
power
resource.
demand,
and
it can
avoid a it
process
of
RRC
connection,
Release
Indication"(with
If
this switch
is closed,
itradio
won't
waste
of
resource
,
the
can decrease
thethe
call
time
cause).
allow
to release
PTM
resource
distribution
is
very
delay,
but it also
occupies
Configuration
Rule:
It needs
radio
bearer,
which
means
rational.
more
radio
resource
low
to
consider
the
round
trip time
that it only can adoptthan
PTM
for
rate
signaling.
It
is
between
UE
and
UTRAN.
the service; if this switch is
Function:
The
switch
used
recommended
to parameter
use
high for
The
ofallow
this
is
open,value
it will
to
release
indicating
whether
the
fast
rate
signaling
because
the
larger,
the
time
of
UE
sending
the PTM radio bearer, which
dormancy
active.
alone
signaling
process
is
the
message"Signaling
means
thatiswhen
the number
Configuration
Rule:
very
short.
Connection
of UE whichRelease
wish to receive
To
turn service
on the
function,
it can
Indication"
again
is
longer,
MBMS
is
greater
Function:
Time
Interval
forthan
make
the
UE
that
support
and
the
time
of
UE
entering
UE
number
threshold used
Taking
an Average
Fast
Dormancy
enter an
an
efficient
battery
for
switching
between
PTP
Configuration
Rule:
It needs
efficient
battery
consumption
consumption
state
when
and
PTM,
then
it
will
choose
to
consider
thedata
user
state
as
quickly
as possible
there
is no
PS
will be
PTP
for
the
service.
experiences
and
the data, but
when
there
is
no
PS
prolonged.
If
the
MBMS
is
not
used,
utilization
ratio
radio in thisis
itThe
is also
easy
toofresult
value
of
this
parameter
parameter
is
invalid
resources.
ping-pong
adjustment.
smaller, it may
result in
The
larger
thesending
value, then
To
turn
off the
function,
it the
unnecessary
more
smoothly
the
data
can't
make
the
UE
enter
an
message "Signaling
amount,
and
it
can
filter
out
efficient
battery
consumption
Connection Release
the
larger
fluctuations,
but
state
as quickly
possible
Indication",
and as
a waste
of if
the
time
is
too
long,
the
when
there is no PS data, but
resource.
response
to the
userping-pong
data
it can avoid
amount
demand
is slow.better
The
adjustment
and provide
smaller
the value, the faster
user experience.
This
parameter
a data
the response
to is
user
idenfication
parameter,
and
amount demand,
but it is
also
there
needinto adjust.
easieristono
result
unnecessary adjustment, and
it may influence the utilization
This
is traffic
ratio parameter
of radio resources.
measurement events
quantity, and there is no need
to adjust.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Function: The pending time

for 4A and 4B.
experiences and utilization
This
parameter
is a
Function:
Theresources.
measurement
ratio
of radio
idenfication
parameter,
and
quantity
of the
volume
The
smaller
thetraffic
pending
time
there
is
no
need
to
adjust.
measurement
for
event 4A is that
, theUE
faster
performs
response that system will
Configuration
It needs
make to user'sRule:
demand
, and
to consider
thesystem
user will
the
faster that
experiences
the
increase
the and
bandwidth,
and
utilization
ratio
of
radio
the
better
the
user
Function: Measurement
resources.
experience
is, but
it also
Report
Transfer
Mode
The
recommended
easier
to resultRule:
in a waste
of
Configuration
It needs
configuration
is successful
RLC
buffer
radio
resources
because
of
to consider
the
payload,
it can
fast respond
unnecessary
bandwidth
ratio of measurement
report.
to
the
change
of
amount
increase;
The
larger
The recommended
Function:
Amountdata
of the
pending
time
for
4A is ,
configuration
is event
Reporting
in Period
Report
the
slower
response
that
Acknowledged
Mode
RLC
, it
Criteria.
system
will make
to Ituser's
can retransmission.
Configuration
Rule:
needs
demand,
and
the resource
slower that
to consider
radio
of
system
will
increase
Uu interface and the the
user
bandwidth,
the worseInterval
the
Function:
Reporting
experience.
user
experience
is;
in
Period
Report
Criteria.
The
smallerr
the
pending
time
Configuration
Rule:
It needs
larger,
the periodic
reports
will
forconsider
event 4B
is,it the
faster of
to
radio
resource
be
more,
and
will
occupy
response
system
will
Uu
interface
and
the of
user
more
radiothat
resource
Uu
make
to
user's
demand,
and
experience.
interface. Reporting criteria
Function:
the
faster
that
system
will
The
value
of
this
parameter
TheUE's
value
of this
parameter is
is
for
traffic
volume
decrease
the
bandwidth,
but
smaller,
the
periodic
reports
smaller, the periodic
reports
measurement,
used for
itindicating
also
to
result
in
will
be
more
frequent,
andof
it
will
be easier
less,
and
the response
the
report
rules
unnecessary
bandwidth
will
occupy
more
radio
to
UE's
traffic
volume
the traffic volume
increase
and
influence
resource
ofalso
Uu
interface.
demand
is
slower, user
and it
measurement.
experiences;
The
larger
the is
The
value of this
parameter
will influence
the
user
Configuration
Rule:
It needs
pending
time
for
event
4B
is,
larger,
the
periodic
reports
will
experience.
to
consider the radio resource
the
slower
response
that
be
more
sparely,
and
the
of Uu interface.
system
willTraffic
make
to
user's
response
to
UE's
traffic
Function:
Volume
To
indicate
whether
Periodical
reporting
criteria
demand,
and
the
slower
that
volume
demand
is
also
Threshold
of
Event
4A/4B
for
the
report
of
average
of RLC
will increase the signaling
system
will
decrease
the
slower,
and
it
will
influence
Non-DCH
Channel.
buffer
payload
for
each
radio
load of Uu interface, it may
bandwidth,
it will
make
the
the
user
experience.
Configuration
Rule:
It needs
bear
is requested.
be easy
to
result
in the
utilization
ratio
of
radio
Function:
To
indicate
whether
to
consider
the
user
Configuration
Rule: It So
needs
signaling congestion.
resources
low.
the
report reporting
of
RLC
buffer
experiences
and
utilization
to
consider
the
radio
resource
periodical
criteria
is
payload
for
each
radio
bear is
ratio
radio
resources.
of
.and
notUu
toofinterface
be
used,
event
requested.
The
smaller
the threshold
of
Average
of
RLC
Buffer
reporting
criteria
is
The
recommended
event
4Aisisnot
, the
faster
Payload
recommended
recommended.
configuration
toUE,
report
RLC
response
thatis
system
to be repoted
for
itwill
can
buffer
payload,
it
is
used
make
to
user's
demand
,
and
save the radio
resource
offor
Uu
Function:
To indicate
whether
RNC's
decision
of
event
the
faster
that
system
will
interface
.
the report of Variance of RLC
4B0
forPayload
UE's
traffic
volume
increase
the bandwidth,
and
Buffer
for each
radio
measurement.When
the
the user UE
bearbetter
is requested.
reports
event
the
experience
is,4B,
but and
it It
also
Configuration
Rule:
needs
RLC
buffer
payload
is
0, then
easier
to
result
in
a
waste
of
to consider the radio resource
itof'sUu
considered
as
event
4B0
radio
resources
because
of
interface.
for
uplink.of RLC
unnecessary
bandwidth
Variance
Buffer
increase;
the
Payload isThe
not larger
recommended
threshold
of event
4Asave
is , the
to be reported,
it can
slower
response
system
radio resource
of that
Uu interface
will
. make to user's demand,
and the slower that system
will increase the bandwidth,
the worse the user
experience is;
The larger the threshold of
event 4B is, the faster
make to user's demand, and
the faster that system will
decrease the bandwidth, but
it also easier to result in
unnecessary bandwidth
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
The
smaller
the threshold of
DCH
of 32the
kbps.
the
better
user
event
4A
is
,
the
fasterneeds
Configuration
Rule:
experience
is,
but it It
also
response
that
system
will
to
consider
the
user
easier
touser's
result demand
in a waste
of
make
to
, and
experiences
and
utilization
Function:
Traffic
Volume
radio
resources
because
of
the
faster
thatresources.
system will
ratio
of radio
Threshold
of bandwidth,
Event
4A/4B
for
unnecessary
bandwidth
increase
the
and
The
smaller
the
threshold
of
DCH
of
64
kbps.
increase;
The
larger
the
the
better
the
user
event
4A isof
, event
the
faster
Configuration
Rule:
It
needs
threshold
is , the
experience
is,
but it4A
also
response
that
system
will
to
consider
the
user
slower to
response
that
system
easier
result
in
a
waste
of
make
to user's
demand
, and
experiences
and
utilization
will
make
to
user's
demand,
Function:
Traffic
Volume
radio
resources
because
of
the
faster
thatresources.
system
will
ratio
of radio
and
the
slower
that 4A/4B
system
Threshold
of bandwidth,
Event
for
unnecessary
bandwidth
increase
the
and
The
smaller
the
threshold
of
will
increase
the
bandwidth,
DCH
of
128
kbps.
increase;
The
larger
the
the
better
the
user
event
4A isof
, event
the
faster
the
worse
the
user
Configuration
Rule:
It
needs
threshold
is , the
experience
is,
but it4A
also
response
that
system
will
experience
is;
to
consider
the
user
slower to
response
that
system
easier
result
in
a
waste
of
make
to user's
demand
,of
and
Themake
larger
the
threshold
experiences
and
utilization
will
to
user's
demand,
Function:
Traffic
Volume
radio
resources
because
of
the
faster
that
system
will
event
is,
the
faster
ratio
of4B
radio
resources.
and
the
slower
that
system
Threshold
of bandwidth,
Event
4A/4B
for
unnecessary
bandwidth
increase
the
and
response
that
system
will
The
smaller
the
threshold
of
will
increase
the
bandwidth,
DCH
of
256
kbps.
increase;
The
larger
the
the
better
the
user
make
to user's
demand,
and
event
4A
isof
, event
the
faster
the
worse
the
user
Configuration
Rule:
It
needs
threshold
4A
is
, the
experience
is,
but
it
also
the
faster
that
system
will
response
that
will
experience
is;
to
consider
thesystem
user
slower
response
that
system
easier
to
result
in
a waste
of
decrease
the
bandwidth,
but
make
to
user's
demand
,of
and
Themake
larger
the
threshold
experiences
and
utilization
will
to
user's
demand,
Function:
Traffic
Volume
radio
resources
because
of
it also
easier
tosystem
result
in
the
faster
that
will
event
is,
the
faster
ratio
of4B
radio
resources.
and
the
slower
that
system
Threshold
of bandwidth,
Event
4A/4B
for
unnecessary
bandwidth
increase
the
and
response
that
system
will
The
smaller
the
threshold
of
will
increase
the
bandwidth,
DCH
of
384
kbps.
increase;
The
larger
the
increase
and
influence
user
the
better
the
user
make
to user's
demand,
and
event
4A
isof
, event
the
faster
the
worse
the
user
Configuration
Rule:
It
needs
threshold
4A
is
, the
experiences;
The
smaller
the
experience
is,
but
it
also
the
faster
that
system
will
response
that
system
will
experience
is;
to
consider
the
user
slower
response
that
system
threshold
of
event
4B
is,
the
easier
to
result
in
a
waste
of
decrease
the
bandwidth,
but
make
to user's
demand
,of
and
The
larger
the
threshold
experiences
and
utilization
will
make
to
user's
demand,
slower
response
that
system
Function:
The
time
to
trigger
radio
resources
because
of
it also
easier
tosystem
result
in
the
faster
that
will
event
is,
the
faster
ratio
of4B
radio
resources.
and
the
slower
that
system
will 4A
make
to4B.
user's
demand,
for
and
unnecessary
bandwidth
increase
the
bandwidth,
and
response
that
system
will
The
smaller
the
threshold
of
will
increase
the
bandwidth,
and
the
slower
that
system
Configuration
Rule:
Itthe
needs
increase;
The
larger
increase
and
influence
user
the
better
the
user
make
to
user's
demand,
and
event
4A
is
,
the
faster
the
worse
the
user
will
decrease
the
bandwidth,
to
consider
the
user
threshold
of
event
is
, the
experiences;
The
smaller
the
experience
is,
but
it4A
also
the
that
system
will
response
that
system
will
experience
is;
itslower
willfaster
make
the
utilization
ratio
experiences
and
utilization
response
that
system
threshold
of
event
4B
is,
the
easier
to
result
in
a
waste
of
decrease
the
bandwidth,
but
make
toradio
user's
demand
,of
and
The
larger
the
threshold
of
radio
resources
low.
ratio
of
resources.
will
make
to
user's
demand,
slower
response
that
system
radio
resources
because
of
it also
easier
tosystem
result
in
the
faster
that
event
4B
is,
the
faster
The
smaller
the
time
towill
and
the
slower
that
system
will make
to user's
demand,
unnecessary
bandwidth
increase
the
bandwidth,
and
response
that
system
trigger
event
4A
is
,will
the
will
increase
the
bandwidth,
and
thefor
slower
that
system
increase;
The
larger
the
increase
and
influence
user
the
better
the
user
make
to
user's
demand,
and
faster
response
that
system
the
worse
theevent
user
will
decrease
the
bandwidth,
threshold
of
4A
is
, the
experiences;
The
smaller
the
experience
is,
but
it
also
the
faster
that
system
will
will
make
to
user's
demand
,
experience
is;
itslower
will make
the
utilization
ratio
response
that
system
threshold
of
event
4B
is,
the
easier
to
result
in
a
waste
of
decrease
the
bandwidth,
but
and
the
faster
that
system
will
The
larger
threshold
of
of
radio
resources
low.
will
make
tothe
user's
demand,
slower
response
that
system
radio
resources
because
of
it also
easier
to result
in and
increase
the
bandwidth,
event
4B
is,
the
faster
and
the
slower
that
system
will make to user's
demand,
unnecessary
bandwidth
the
better Tx
thethe
user
response
that
system
willAfter
Function:
Interruption
will
increase
bandwidth,
and
the slower
that
system
increase;
The
larger
theuser
increase
and
influence
experience
is,
but
it
also
make
to
user's
demand,
and
Trigger
Configuration
Tag.
the
worse
theevent
user
will
decrease
the
bandwidth,
threshold
of
4A
is
, the
experiences;
The
smaller
the
easier
to
result
in
a
waste
of
the
faster
that
system
will
Configuration
Rule:
is;
itexperience
will make
the
utilization
ratio
slower
response
that
system
threshold
of
event
4B
is,
the
radio
resources
because
of
decrease
the
bandwidth,
but
Configuration
Rule:
It
needs
The
larger
the
threshold
of
of
radio
resources
low.
will
make
to
user's
demand,
slower
response
that
unnecessary
bandwidth
it also
easier
to
result
in
Function:
The
time
of system
to
consider
the
user
event
4B
is,
the
faster
and
the
slower
that
system
will make The
totransmiting
user's
demand,
increase;
larger
the
time
unnecessary
bandwidth
prohibiting
data
experiences.
response
thatthe
system
will
will
increase
bandwidth,
and
the slower
that
system
to
trigger
for
event
4A
is
,
the
increase
and
influence
user
on
RACH.
Because
the
ofand
make
to user's
demand,
the
worse
thecapability
user
will
decrease
the
bandwidth,
slower
response
that
system
experiences;
The
smaller
Configuration
Rule:
RACH
channel
is limited,
ifthe
the
faster
that
system
will ratio
experience
is;
itConfiguration
will
maketo
the
utilization
will
make
user's
demand,
threshold
of
event
4B
is,
the
Rule:
It
needs
after
triggerring
traffic
volume
decrease
the
bandwidth,
but
The
larger
the
threshold
of
of
radio
resources
low.
and
the
slower
that
system
slower
response
that
system
to
consider
the
user
measurement
report,
it also
easier
toevent
result
in
event
4B
is,
the
faster
will
increase
the
bandwidth,
make
tooperation
user's
demand,
experiences.
R99
RACH
is
very
unnecessary
bandwidth
response
that
system
will
the
worse
the
user
and
the
slower
that
system
The
value
of
parameter
is
slow
so
if
UE
keeps
sending
increase
and
influence
user
make
to
user's
demand,
and
experience
is;The
will
decrease
the
larger,
the
time
ofbandwidth,
prohibiting
uplink
U-plane
data,
SRB
experiences;
smaller
the
the
faster
that
system
will
The
the
time
tois, the
itdata
willsmaller
makeofthe
utilization
ratio
transmiting
data
on
RACH
transfer
will
be
delayed
threshold
event
4B
decrease
the
bandwidth,
trigger
for
event
4B
is,system
thebut
of
radio
resources
low.
after
triggerring
event
report
significantly.
slower
response
that
itis also
easier
to
result
in
faster
response
that
system
tranmission
Tx
interruption
afterdemand,
trigger is
willlonger,
make the
to user's
unnecessary
bandwidth
will
make
toofuser's
demand,
timeliness
the
uplink
used
to
suspend
U-plane
and
the
slower
that
system
increase
and
influence
and
the
faster
that
system
signaling,
for example
, userwill
data
transmission
before
will
decrease
the
bandwidth,
Function:
Traffic
volume
experiences;
The
smaller
the
decrease
the
bandwidth,
but
measure
report
and
CELL_FACH
to
CELL_DCH
itthreshold
will make
the
utilization
ratio
measurement
configuration
of
event
4B
is,
the
itnumber
also
easier
tofor
result
inthe is
reconfiguration
response,
state
transition
so
that
UE
of
radio
resources
low.
, used
indexing
a
slower
response
that
system
unnecessary
bandwidth
better,
but
it
may
influence
can
avoid
U-plane
data
to
set
of
parameters
configured
will
make
to
user's
demand,
increase
and
influence But
userit
the
user
experience.
block
uplink
signalling.
for traffic
volume
and
the
slower
that
system
experiences;
The
larger
the
The
value
of
parameter
is
may
influencethe
user
measurement.
will
decrease
bandwidth,
time
to
trigger
for
event
4B
is,
smaller,
the
time
of
experience
if Tx
interruption
Configuration
Rule:
All theratio
itprohibiting
willslower
makeresponse
the
utilization
the
that
transmiting
data
after
trigger
is configured.
parameters
of
CueTrv
must
of
radio
resources
system
make
tolow.
user's
on
after
triggerring
TheRACH
recommended
have
thewill
corresponding
demand,
andisis
the
slower
that
event
report
shorter,
the
configuration
Tx
UeTrvMCfgNo
ofthat
the
same
system
will
decrease
the
tranmission
timeliness
interruption
after
triggerofisthe
not
value
in UeTrv.
bandwidth,
itSuggestion:
will for
make
the
uplink
signaling,
example
configured.
Adjustment
All ,
utilization
ratio ofof
radio
measure
report
and
the parameters
CueTrv
resources
low.
reconfiguration
response,
is
must have the corresponding
worse.
UeTrvMCfgNo of the same
The
valuerecommended
in UeTrv.
configuration is that Tx
interruption after trigger is not
configured.
Fixed
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Function: Switch of CS
Function:
To indicate the
64kbps Establishment
in
purpose
and
functions
external UTRAN
cell. of the
set
of traffic volume
Configuration
Rule: The video
measurement
configuration
service
of CS 64kbps
occupy
parameters.
many resources, it can
Adjustment
Suggestion:
This
control
theMaximum
access
ofAllowable
video
Function:
Function:
Maximum
Bit
Rate
parameter's
value
is
fixed,
service
by
the to
switch.
To turn
Rate
on
DCH
be Increased
on
DL
DCH
PS
RAB
and
there
is for
no NRT
need
toservice
adjust
on
the
function,
video
to
When UE
is in Macro
in
Serving
Cell.
it.
is allowed to access, and the
Diversity.
Configuration
Rule:
It needs
user
experience
is good,
but
Configuration
Rule:
It needs
to
consider
the
transmission
ittooccupies
many
radio
considerofthe
user
bandwidth
Iub,
theBit
user
Function:
Maximum
Rate
resources.
experiences
and
the
ratio
of
experiences
and
the
on
E-DCH
for
NRT
PS
RAB
To
turn
off
the
function,
video
call
drop.
successful
callallowed
ratio. to
in
Serving
Cell.
service
is not
The
value
of
this
parameter
The
reason
of
the
adding
of is
Configuration
Rule:
Itallowed
needs
access.the rate to be
larger,
this
parameter
is
used
for
the
to
consider
thethe
transmission
If
the
operator
doesn't
is
higher,
and
user hope
scene
of
very
limited
bandwidth
of
Iub,
user
the
vedio services'
acess
for
Function:
Maximum
Bit
Rate
experience
isbandwidth
alsothe
better,
transmission
ofbut
Iub
experiences
and
the
some
special
scene,
for
UL
DCH
forusers'
NRT
PS
RAB
iton
isavoid
also
easier
to increase
to
many
bad
successful
calldrop.
ratio. the
example,
in
Serving
Cell.
the
risk
ofbathroom,
call
user
experiences
because
of
The
reason
of
the
adding
of
function
should
turned
off.
Configuration
Rule:
needs
The value
of high
thisbe
parameter
some
user's
bitItrate
intheis
this
parameter
is
used
for
to
consider
the
smaller,
the
ratetransmission
to be
the
same
cell.
scene
ofisvery
limited
Function:
Maximum
Rate
bandwidth
of
Iub,
theBit
user
allowed
lower,
the
user
The
value
offor
this
parameter
is
transmission
bandwidth
of Iub
on
DL
DCH
RT
PS
RAB
in
experiences
the
experience
isand
also
worse.
larger,
the
rate
to
be
allowed
to
avoid Cell.
many
users'
bad
Serving
successful
callthe
ratio.
is
higher,
and
user
user
experiences
because
Configuration
Rule:
It needs
The
reason
of
the
adding
ofof
experience
also
better,
but
some
user'sis
high
bit
rate
in
to
consider
the
transmission
this
parameter
is
used
for
the
itthe
is same
also easier
to the
influence
cell.
bandwidth
of Iub,
user
scene
of
very
limited
other
users'
quality.
Function:
Maximum
Bit Rate
The
value
oftraffic
this
parameter
is
experiences
and
the
transmission
bandwidth
of Iub
The
value
of
this
parameter
is
on
E-DCH
for
RT
PS
RAB
in
larger,
the
rate
to
be
allowed
successful
call
ratio.
to
avoid the
many
users'
bad
smaller,
rate
to
be
Serving
Cell.
is
higher,
and
user
The
reason
of the
thebecause
adding ofof
user
experiences
allowed
is lower,
the
Configuration
Rule:
Itrate
needs
experience
ishigh
also
better,
but
this
parameter
is and
used
forin
the
some
user's
bit
call
ratio
is
to
consider
the
transmission
itsuccessful
is
also
easier
to
influence
scene
of very
limited also
the
same
cell.
higher,
but of
thebandwidth
user
bandwidth
Iub,
the
user
other
users'
quality.
transmission
of Iub
Function:
Maximum
Bit
Rate
The
value
ofistraffic
this
parameter
is
experience
also
worse.
experiences
and
the
The
value
of
this
parameter
is
to
avoid
many
users'
bad
on
UL DCH
for to
RTbe
PSallowed
RAB in
larger,
the rate
successful
call
ratio.
smaller,
the
rate
to
be
user
experiences
because
of
Serving
Cell.
is higher, and the user
The
reason
of
theand
adding
of
allowed
is lower,
the
some
user's
high
bit
in
Configuration
Rule:
Itrate
needs
experience
is
also
better,
but
this
parameter
is
used
for
call
is alsothe
the
same
cell.
to
the ratio
transmission
itsuccessful
isconsider
also easier
to influence
scene
of
very
limited
higher,
but
the
user
The value
oftraffic
this the
parameter
bandwidth
Iub,
user
other
users'of
quality.
transmission
bandwidth
experience
alsothe
is
larger,
rate
toworse.
be of Iub
experiences
The
valuethe
ofisand
this
parameter
is
to
avoid is
many
users'
allowed
higher,
the
successful
call
ratio.
smaller,
the
rate
toand
bebad
user
experiences
because
user
experience
also
The
reason
of theis
adding
ofof
allowed
is lower,
and
thebetter,
some
user's
high
bit
rate
in
but
it
is
also
easier
to
this
parameter
is
used
for
successful call ratio is alsothe
the
same
cell.
influence
other
users' traffic
scene
of
very
higher,
but
thelimited
user
The
value
is
quality.
transmission
bandwidth
experienceofisthis
alsoparameter
worse.of Iub
larger,
the
rate
to
be
allowed
The
value
of
this
parameter
to avoid many users' bad is
is
higher,
and
thetobecause
user
smaller,
the
rate
be
user
experiences
of
experience
ishigh
alsoand
better,
but
Function:
DRX
allowed
isE-FACH
lower,
the in
some
user's
bit
rate
itSupport
is same
also Indication
easier
to influence
inisCell.
successful
call ratio
also
the
cell.
other
users'
traffic
quality.
Configuration
Rule:
higher,
butInactivity
the
user
The
value
of
this
parameter
Function:
Time of is
The
value
of
To
turn
onTransmission.
the
function,
it canis
experience
isthis
also
worse.
larger,
the
rate
to parameter
be
allowed
E_FACH
smaller,
the
rate
to
be
save
the
battery
consumption
is higher, and the
user
Configuration
Rule:
It needs
allowed
lower,
and
thebut
for
UE inisE-FACH
state,
experience
is
better,
butit
to
consider
thealso
transmission
call
ratio
is
also
also
may
influence
the
user
itsuccessful
is
also
easier
to
influence
bandwidth of UE battery
higher,
but the
user
experience
because
ofuser
DRX.
other
users'
traffic
quality.
consumption
and
the
experience
is
also
worse.
To
turn
off
the
function,
it
The value of this parameter
is
experience.
can't
save
the
battery
smaller,
theofrate
be
The
value
this to
parameter
is
consumption
for difficult
UE
E-to
allowedthe
is lower,
andinthe
larger,
more
FACH
state.state,
successful
call ratio
also
enter
DRX
andisthe
higher,
but theconsumption
user
more battery
for
experience is also worse.
UE.
smaller, the easier to enter
DRX state, and it can save
the battery consumption, but
it also may influence the user
experience.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
DSCH.
Configuration
Rule:
It needs
Function: Cycle
Length
of
to
consider UE
battery of HSDiscontinue
Receiving
consumption
and the user
DSCH.
experience.
The
value ofUE
this
parameter is
to consider
battery
larger,
the
cycle
length
of
consumption and the user
discontinue receiving of HSexperience.
DSCH
is longer,
it can is
The value
of thisand
parameter
Function:
Switch
of
RRC
save
battery
consumption,
larger, the number of frames
Redirection
Triggered
byuser
but
it may
influence
the
using
for HS-DSCH
Detection
Radio
Resource
Congestion
experience.
in the Cycle Length of
To
turn
off of
the
function,
The
value
this
parameter
discontinue
receiving
of when
HS- is
RRC
Connection
Request
smaller,
cycle
length
ofto
DSCH
isthe
more,
and
the user
be
setup
on
DCH/DCH
is
discontinue
receiving
of
HSexperience
is better,of
but
the
Function:
Indication
UE
rejected
of radio
DSCH
isbecause
shorter,
and
the
user
more
battery
consumption
for
with
Enhanced
DRX.but
resource
congestion,
RRC
experience
is
better,
the
UE;
Configuration
Rule:
The for
redirection
is this
not
performed,
more
battery
consumption
The
value
of
parameter
recommended
value
is
1, it is
and
RRC
connection
can
UE.
Function:
Increment
Times
of
smaller,
the
number
of
frames
can
make
all
ue
in
enhanced
continue
to
try UE
to be
setup
on
Event
4B0
for
which
is
not
using
for
HS-DSCH
Detection
cell_FACH
state use
the
RACH/FACH
; ofDRX
sensitive
for
Battery
in
the
Cycle
Length
and
save
battery
To
turn on the
function,
Consumption
Transferred
to
discontinue
receiving
of when
HSconsumption,
when
RRC
Connection
Request
to
URA_PCH
or
Idle
state.
DSCH
is
less,
and
it
can
save
Enhanced
DRX
is used.is
be
setup
on
DCH/DCH
Configuration
Rule:
It
needs
battery consumption, but it
rejected
because
of
radio
to
consider
UEthe
battery
may
influence
user
resource
congestion,
consumption
user
experience. and the RRC
Redirection
experience. based on the
value
of the
The value
ofparameter
this parameter is
PriRedirectRat
is allowed.
larger, the transition
for the
The
switch
is
recommended
Function:
This
parameter
UE
to
URA_PCH
or6.8kbps
Idle is
Function: Switch of
to
be on,
when
RRC
indicates
the
different
more
difficult,
and
user
Signaling
Using
onthe
DCH
Connection
Request
to
be
dynamic
bearerbut
control
experience
is better,
the
To
turn onradio
the
function,
when
setup
on
DCH/DCH
is
scene,
which
is
used
to
more battery
consumption
signaling
is carried
on DCHfor
rejected
because
radio
distinguish
fast
or of
slow
scene
UE. RRC
during
connection
setup
resource
congestion,
RRC
for
the
dynamic
radio
bearer
valueRB
of this
,The
or when
hasparameter
been setupis
connection
can
continue
control.
smaller,
transition
for to
the
and onlythe
signaling
is carried
try
to
be
setup
on
the
Configuration
Rule:
The
UE
to
URA_PCH
or
Idle
is
on DPCH alone , it can
RACH/FACH,
itparameter
can
improve
recommended
easier, and3.4kbps
it can
save
battery
substitute
signaling
the
success
ratio
of
RRC
value
is
0,
it
can
make
theit
consumption,
but it may
by
6.8 kbps signaling
and
connection.
resource
more
influence
the
can
speedutilization
theuser
signaling
sufficient.
experience.
process,
ut it will also occupy
more power resource.
To turn off the function, when
signaling
carried
ontraffic
DCH
Function: is
User
plane
during RRC
connection setup
volume
measurement
,Measurement
or when RB number
has
been
configuration
forsetup
HSevent
identity
and only
is carried
DSCH
in signaling
CELL_FACH,
used
on DPCH
alone
for
indexing
a set, itofcan't
substitute
3.4kbps
signaling
parameters
configured
for
Function: User plane
traffic
by
6.8
kbps
signaling.
user plane
traffic volume
volume
measurement
event
measurement
configuration
numberfor
forHSEDSCH
in
CELL_FACH.
DCH in CELL_FACH, used
Configuration
for indexing a Rule:
set of It must
meet
the
restriction
Parameter
Function:
This
parameters configured
for
conditions.
parameter
is
relative
to
user plane traffic volumethe
Adjustment
Suggestion:
It
cell
maximal
transmitfor
carrier
event
measurement
Emust
meet
theused
restriction
power
and
is
to decide
DCH in
CELL_FACH.
conditions.
the
initial AMRRule:
data It
rate.
Configuration
must
Configuration
Rule:
The
value of the parameter is
conditions.
larger,
the AMR
access with
Adjustment
Suggestion:
It
the
data rate is
mustdiscounting
more
difficult to occur, and
conditions.
the QoS is better;
smaller, the AMR access with
the discounting data rate is
esaier to occur, and the
system is larger, but the QoS
is worse.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A

parameter is relative to the
cell uplink base noise and is
used to decide the Initial AMR
data rate.
Configuration Rule:
Parameter
Function:
This
larger, the AMR
access
with
parameter
indicates
the
the discounting data rateInitial
is
AMR
ratetowhen
load
more data
difficult
occur,cell
and
is
thehigh.
QoS is better;
Configuration
Rule:
The value of the
parameter is
The
value
the parameter
is
smaller,
theof
AMR
access
Parameter
Function:
Thiswith
larger,
the initial
AMRthe
data
the discounting
data
rate
is
parameter
indicates
Initial
rate
isdata
higher,
the
QoS
is
esaier
to occur,
and
the
AMR
rateand
when
cell
load
better;
system
is
high. is larger, but the QoS
The
value of the
parameter is
is
worse.
Configuration
Rule:
smaller,
the
initial
AMR datais
The value of the parameter
rate is lower,
andAMR
the system
larger,
the initial
data
is
larger,
butFunction:
the
QoS
isQoS is
Parameter
rate
is higher,
and
theThis
worse.
parameter
indicates the valid
better;
UE
heart
beat. is
Theversion
value offor
the
parameter
Function:
The
Switch
Configuration
Rule:
It
smaller, the initial AMRisdata
Indicates
whether
Only
Judge
mainly
used
for
rate is lower,
andsignalling
the
system
the
Downlink
Traffic
on
Heart
storm
scene,
indicates
is larger,
but the
QoS isthe
Beat
for Channel
Switching
to
valid
UE
version
for
heart
worse.
Parameter
Function:
BCH
PCH/IDLE.
beat.When
the signalling load
Power.
Configuration
is
not high, it'sRule:
not Tests
Configuration
Rule:
It Period.
needs
Function:
Heart
Beat
confirm
that
UE
doesn't
send
recommended
to
perform
to
consider
the
downlink
Configuration
Rule: Tests
uplink
datadetection
packages
after
it
heart
beat
to
UE.
coverage
and
system
confirm
UE
willbeat
send
receivesthat
the
heart
data,
capacity.
The parameter
SCRI
message
when
it have
and the
channel
switching
to
value
is
configured
to ensure
no
PS
data
for 4
PCH or Idle transmission
state based
on
the
in celland
edge
receive
or
seconds,
so the
value
of
the5UE
downlink
uplink
traffic
the
system
information
rightly
this
parameter
should
be
less
volume measurement can be
and
avoid
generating
Parameter
Function:
thethe
than
4 seconds,
to avoid
UE
normally
performed,
so
unnecessary
waste.
initial
value
ofpower
the
total
sending
SCRI
message
and
parameter
OnlyDnOnHB
can
If
value
is too
transmission
power
of HSreleasing
network
connection.
bethe
setparameter
to "0:
Off'.
small,
thevalue
BCHiscoverage
PDSCH,
HS-SCCH,
But if its
too Esmall,will
it
be
small
the
UE's
AGCH,
E-RGCH
and
E-HICH
willso
make
thethat
heart
beat
date
probability
of and
rightit's
receiving
codes.
too frequent,
a waste
Parameter
Function:
This
will
be
bad
when
it
in the
Configuration
Rule:isThe
of resources.
Parameter
Function:
the
parameter
indicates
the
index
edge
of
the
cell.
configuration
of
this
maximum
value ofGBR
the total
of
limiting
HSDPA
If
the
parameter
value
is
too
parameter
need
to
consider
transmission
power of HSresource
consumption
big,
it
will
increase
the
the
quality
and
capacity
of
PDSCH,
HS-SCCH, Eparameters.
unnecessary
interference,
R99
andE-RGCH
HSDPA
services.
AGCH,
andIt E-HICH
Configuration
Rule:
needs
waste
the
downlink
power
Adjustment
Suggestion:
codes.
to
meet
the
restriction
and
decrease
the
downlink
When the HSPA
total
Configuration
Rule:
The
between
CHsGBRResLmtIdx
capacity.
downlink
power
is allocated
configuration
of
this
of
Chspa
and
Adjustment
Suggestion:
used
the method
"RNC
Parameter
Function:
This
parameter
need
toofconsider
HsGBRResLimitIdx
of
When
the
some
UEs
in or
the
Static
Assigning
Mode"
parameter
indicates
the
the
quality and capacity
of
GbrRes.
edge
cannot
receive
the
"RNC
dynamic
assigning
assumed
HS-PDSCH
power
R99 and HSDPA services.
system
rightly,
mode",
ifinformation
thisSuggestion:
parameter
is the
offset
relative
to P-CPICH/SAdjustment
BCH
power
can
be
increased,
too
small,
the
HSDPA
total
CPICH
power
used
for CQI
When the
HSPA
total
otherwise
thebe
BCH
power
power
would
too
small, can
measurement.
downlink
power
is
allocated
be
decreased.
and
it
might
reduce
the
Configuration
Rule:
The
used the method of "RNC
quality
and
capacity
ofthe CQIif
principle
is
to
controlMode",
Dynamic
Assigning
HSDPA
service.If
this
in
the
range
form
1
to
30.
this parameter is too small,
parameter
istotal
too power
big,
thewould
If
this
parameter
is configured
the
HSDPA
HSDPA
totalservice
power
would get
be
too
big,small,
the
be too
and it might
might
too
big,
and
it
might
reduce
big
CQI,the
and
get big
power,
reduce
quality
and
the
and
capacity
but
itquality
will of
reduce
theservice.
cell of If
capacity
HSDPA
R99
service. if this
capacity.But
parameter
this parameter
is too
big, the
When
the
HSPA
total
is
configured
too
small,
it be
HSDPA total power would
downlink
power
isthe
allocated
might
not
satisfy
too
big,
and
it might
reduce
used
the method
of "Node
requirment
of CQI.
the quality
and
capacity
of B
Assigning
Mode",
this
Adjustment
R99 service.Suggestion: If
parameter
is invalid.
HSDPA
service
quality
When the
HSPA
total in
most
condition
cannot
be
downlink power is allocated
satisfied,
the
value
of
this
used the method of "NodeB
parameter
can be this
adjust
Assigning Mode",
bigger.
If the
parameter
is HSDPA
invalid. capacity
of the cell is limit, the value of
this parameter can be adjust
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Parameter Function: The

parameter
Parameter indicates
Function:the
This
minimum
total
transmission
parameter indicates
whether
power
for HSPA,
HSDPApreserving
evolution function
is
mainly
consider
the
powerof
used in the configuration
balance
MPO. of HS channal and
DCH
channal.
Parameter
Function:
ThisBit0Adjustment
Suggestion:
Configuration
Rule: The
parameter
indicates
the
2 separately
indicates
configuration
of this HSPA+
threshold
of following
non-serving
Ewhether the
parameter
need
to
consider
DCH
to total
E-DCH
power
function
is used:
64QAM,
the
quality
and capacity
of
ratio.
MIMO,
DC-HSDPA,
which
Configured
according
to is
R99
and
HSDPA
services.
Configuration
Rule:
just forcondition
showing in
screen
and
actual
and
should
Adjustment
Suggestion:
This
parameter
has noin the
can
not
be reconfigured.
be
guarrateed
unique
When
the
total
relation
to HSPA
the overload
RNC.l
downlink
power
is
allocated
control.
used
the
method
of
"RNC
This parameter configuration
Dynamic
Assigning
mainly
consider
HSUPA
Mode".Larger
value
of in
this
scheduling:
The
users
the
Parameter
Function:
This
parameter,
more
power
can
macro
diversity
status
is
parameter
a configuration
be
usedabout
byisHS
subscriber,
always
40%
of the
total
index
which
indicates
a set
more
easy
to
trigger
the
rateof
users
in
the
cell,
for
the
users
diversity
mode
and
service
decrease
of R99
subscriber,
containspower
HS
users
and DCH
related
control
so
the the
KPI HS
of
DCH
users,
userssubscriber
isThis
about
Parameter
Function:
parameters.
is
bad.
But
if
the
value
15%
in
the
macro
diversity
parameter
indicates
theof this
Configuration
Rule:
There
are
parameter
is
set
too
small,
status,
so
it allocated
15%
quality
factor
of the UL
several
configurations
of
the
the
power
allocated
HS
power
to
HS
users
intoThis
nonDPCCH
PILOT
domain.
power
control
parameters,
Parameter
Function:
subscriber
is
little,
it
will
affect
serving
cell.
Configuration
Rule: Eb/N0
the
index
for
each
parameter
indicates
the of
the
throughput
of
HS
Adjustment
Suggestion:
DPCCH
PILOT
domain
is
configuration
are
different.
power
offset
of
DL
DPCH
subscriber
when
the
resource
The
larger
this
parameter
different
in
different
radio
When
special
cell
need
TFCI
domain relative to to is,
is
little.
the
more
power
isrelative
allocated
environment,
it needs
to
configure
special
DPCH
data
domain.
When
the
HSPA
total
to
the
users
in
the
macro
consider
the
service
quality
power
control
parameters,
Configuration
Rule:
It
needs
downlink
power itis can
allocatedwe
diversity
status,
and
cell capacity.
Parameter
Function:
This
configure
this
index
with
the
to
consider
the
service
quality
used
the method
of "NodeB
decrease
the
throughput
ofis,
The
bigger
this
parameter
parameter
indicates
the
value
index
to
the
and
cell
capacity.
Assigning
Mode",
this
users
in
serving
cell.
the
bigger
power
of
the
power
offset
of
DL
DPCH
configuration
of
the
power
The
controlisdomain
is the
parameter
invalid.
The
smaller
parameter
is,
service,
it will
reduce
theDPCH
TPC
domain
relative
to
control
parameters
which
we
foundation
tothis
demodulate
the
the
less
power
is
allocated
to
capacity
of cell.
data
need.domain.
data
domain,
so the power of
the
users
inFunction:
the
Parameter
The
smaller
this
parameter
Configuration
Rule:
ItThis
needsis,
Adjustment
Suggestion:
control
domain
isnon-serving
relatively
cell,
it
can
decrease
parameter
indicates
the
the
smaller
power
of
the
to
consider
the
service
Primarythan
keydata
can not
be quality
higher
domain.
throughput
of
the
users
in
power
offset
of
DL
DPCH
service,
it
will
affect
the
and
cell
capacity.
modified.
If
the power of TFCI domain
non-serving
cell.
PILOT
domain
relative
to
quality
of
the
service.
The
control
domain
is
the
is too small, TFCI cannot be
DPCH
datato
domain.
Adjustment
Suggestion:
foundation
demodulate
demodulated
correctly,
it the
Configuration
Rule:
needsof
When
the
cell
uplink
capacity
data
so
the Itpower
woulddomain,
affect the
service
to
consider
the service
is
limit,
the value
thisquality
control
domain
is of
relatively
quality.
and
cell
capacity.
parameter
can
be
reduced
higher
than
data
domain.
Parameter
This
If the powerFunction:
of TFCI domain
The
domain
is
the is
duly.
If
power
TPC
domain
parameter
the
is the
toocontrol
large,indicates
itofwill
waste
foundation
to
demodulate
too
small,
TPC
cannot
be
power
offset
relative
to
DLthe
power, and affect the cell
data
domain,
so
the power
demodulated
correctly,
it of
DPCH
pilot domain
capacity.
control
domain
isservice
relatively
would
affect
the
configured
for
E-AGCH
in
Adjustment
Suggestion:
higher
than
data
domain.
quality.
10ms
When E-TTI.
the cell downlink
If
the
of
PILOT
domain
Parameter
Function:
This
If
the power
power
ofRule:
TPC
domain
Configuration
capacity
is limit,
the This
value
of is
is
too
small,
PILOT
cannot
be
parameter
indicates
the
too
large,
it
will
waste
power,
parameter
should
the
this parameter
canensure
be
demodulated
correctly,
it
power
offset
relative
to
DL
and
affect
the
cell
capacity.
E-AGCH
power
(for
10ms
reduced duly.
would
affect
the service
DPCH
pilotenough
domain
Adjustment
Suggestion:
TTI)
large
to satisfy
quality.
configured
for
E-AGCH in for
When
the cellrequirement
downlink
the
minimum
If
theE-TTI.
power
of PILOT
domain
2ms
capacity
isdetection
limit,
the(BLER
value
of
E-AGCH
is
too
large,
it
will
waste
Configuration
Rule:
This
this
parameter
can
be
equal or below 1% in 3GPP
power,
affect And
the
cell
parameter
should
ensure
the
reducedand
duly.
25.101
protocol).
it also
capacity.
E-AGCH
power (forthe
2ms
TTI)
needs to consider
system
Adjustment
Suggestion:
large
enough
to satisfy the
capacity.
When
the
cell
downlink
minimum
requirement
EIf this parameter
is too for
small,
capacity
is
limit,
the
value
AGCH
detection
(BLER
equal
the minimum requirement of
for
this
parameter
be 25.101
or
below
1%
in can
3GPP
E-AGCH
performance
could
reduced
duly.
protocol).
And it also needs to
not
be satisfied.
consider
the system
capacity.
If this parameter
is too
big, it
If
this parameter
is too small,
would
waste the power,
and
the
minimum
requirement
affect
the system
capacity.for
E-AGCH performance could
not be satisfied.
If this parameter is too big, it
would waste the power, and
affect the system capacity.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A

DPCH pilot domain
configured for E-HICH in
10ms
E-TTIFunction:
and single
link
Parameter
This
condition.
Configuration
Rule: This
power
offset relative
to DL
parameter
DPCH pilotshould
domainensure the
E-HICH
power
(for 10ms
TTI)
configured
for E-HICH
in 2ms
large
enough
to
satisfy
the
E-TTI
and single
link This
Parameter
Function:
minimum
requirement
for Econdition.
parameter
indicates
the or
HICH
(MISS
ACK
equal
Configuration
Rule: This
power
offset
relative
to DL
below 1%
in
3GPP
25.101
parameter
should
ensure
the
DPCH
pilot
domain
protocol).
And it(for
also
needs
to
E-HICH
power
2ms
TTI)
configured
forsystem
E-RGCH
in
consider
the
capacity.
large
enough
to satisfy
the
10ms
E-TTIFunction:
and
single
link
Parameter
This
If
this parameter
is too
small,
minimum
requirement
for
Econdition.
parameter
indicates
the orfor
the
minimum
requirement
HICH
(MISS
ACK
equal
Configuration
Rule: This
power
offset
relative
tocould
DL
E-HICH
performance
below 1%
in
3GPP
25.101
parameter
should
ensure
the
DPCH
pilot
domain
not
be
satisfied.
protocol).
And
it
also
needs
to
E-RGCH
power
(for
10ms
Parameter
Function:
This
configured
forsystem
E-RGCH
in it
If
this parameter
is too
big,
consider
the
capacity.
TTI)
large
enough
tothe
satisfy
parameter
indicates
2ms
E-TTI
and
link
would
waste
thesingle
power,
and
If
this
parameter
is too
small,
the
minimum
requirement
for
maximum
downlink
DPCH
condition.
affect
the
system
capacity.
the
minimum
requirement
for
E-RGCH
(MISS
UP
equal
or
transmission
power.
Configuration
Rule: This
E-HICH
performance
could
below 5% in
3GPP
25.101
Configuration
Rule:ensure
It needs
parameter
should
the
not
be satisfied.
protocol).
Andservice
it (for
also2ms
needs
to
consider
the
quality
E-RGCH
power
TTI)
If
thiscell
parameter
is too
big, it
consider
the
system
capacity.
and
capacity.
large
enough
to satisfy
the
would
waste the
power,
If
thisconfigure
parameter
is too for
small,
The
principle
isand
to
minimum
requirement
Eaffect
the
system
capacity.
Parameter
Function:
This
the
minimum
requirement
ensure
the
power
satisfy
the
RGCH (MISS UP equal or for
parameter
indicates
the
E-RGCH
could
minimum
requirement
for
the
below 5%performance
in
3GPP 25.101
maximum
allowed
UL
power
not
be
satisfied.
UE
in the margin
of the
cell, to
it
protocol).
And it also
needs
Configuration
Rule:
Itcapacity.
needs
If
this parameter
isconquer
too
big,the
it
means
that
can
consider
theitsystem
consider
the
service
quality
would
waste
theloss.
power,
and
maximum
path
If this parameter
is too
small,
and
cell
capacity.
The
value
affect
the
system
capacity.
Adjustment
Suggestion:
Parameter
Function:
This for
the minimum
requirement
of
thismaximum
parameter
should
If
the
power
of the
parameter
indicates
thecould
E-RGCH
performance
ensure
the
uplink
service
is downlink
too
big, coverage.
the
power
minimum
DPCH
not be satisfied.
Adjustment
Suggestion:
Parameter
Function:
This
of
thisparameter
service
canis get
abig,
very
transmission
power.
If this
too
it
If
too
small
of
this
parameter,
parameter
is
MBMS
related.
high
theIt radio
Configuration
Rule:
needs
wouldpower
wastewhen
the
power,
and
itcondition
will
reduce
the
quality
of
It
isconsider
SCCPCH
power
for
cell
bad,
and
it will
to
the
call
drop
rate
affect
the is
system
capacity.
uplink
services.
in
half-island
status.
reduce
the
capacity
of
the
and cell capacity.
If
too biggerSuggestion:
ofRule:
this It needs
Configuration
cell.
Adjustment
parameter,
might
increase
consider
theitofMBMS
service
maximum
power
of the
If the value
the
parameter
the
uplink
interference
and
quality
and
cell
capacity
when
service
is too
small,
is
too big,
it will
makethe
the
reduce
the
capacity.
the
cell
in
half-island
status.
of the service
might to
power cannot
be decrease
Parameter
Function:
The
real maximum
Adjustment
Suggestion:
not
satisfy
the
requirement
a suitable
level,
and itThis
willThein
parameter
is
MBMS
related.
transmission
power
is
the
cell
is
in
half-island
status
different
condition.
reduce the capacity of the
It
is SCCPCH
power
minimum
value
of for cells
means
few
neighboring
cell.
single
cell
reception.
MaxUlDpchPwr
and
the UE
are
transmitting
the
same
If the
value of the
parameter
Configuration
Rule:
It
needs
transmission
power
ability.
MBMS
service
and
gain
of
is too small, it will increase
consider
the
MBMS
service
soft
or
selective
combining
the call drop rate. Decreaseis
quality
and
cell
capacity
when
small,
so
the
SCCPCH
power
the power
too
much
may
the
cellthe
in power
single
cell
status.
Parameter
Function:
This
cannot
be
too
small.
make
cannot
Adjustment
Suggestion:
The
parameter
indicates
the
initial
If
this parameter
is too
small,
Parameter
Function:
This
return
to normal
level,
so
the
cell
is
in
single
cell
status
SIR
target.
itcall
would
the MBMS
parameter
indicates
the
dropaffect
happened.
means
softRule:
or selective
Configuration
Itthe
needs
service
quality
when
cell
transmitno
diversity
mode
used
combining
gain,
so
the
to
consider
the
uplink
in
half-island
status.
by this set of diversity mode
SCCPCH
power
should
be it
synchronization
and
cellbig,
If thisservice
parameter
is too
and
related
power
relative
big.
uplink
capacity.
Initial
would reduce
the
cell SIR
control
parameters.
If
this parameter
is too
small,
target
of the service
should
capacity.
Configuration
Rule:
The
itconfigure
would
affect
the
MBMS
near
the
normal
level
of
the is
When the of
cell
notparameter
support
this
service
quality
when
the
SIR
target,
this
can
make
the
MBMS,
this
parameter
is
based on whether the cell
in
single
cell status.
initial
convergence
of the
invalid.
transmit
diversity
mode
is SIR
If
this parameter
is too big,
target
rapidly.
used,
and
which mode
is init
would
reduce
the
cell
Adjustment
Suggestion:
use.
capacity.
If
the value of
this parameter
Adjustment
Suggestion:
is
too
big,
it
would
make
Primary key can not
be the
power
be
increased
too
much
modified
in the initial period after
service setup, and it would
cell.
If the value of this parameter
is too small, it would make
the power too low in the initial
period after service setup,
and it wolud cost long time to
complete uplink
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A

maximum uplink SIR target, it
is aimed to avoid SIR target
increasing too much.
Parameter
Function:
Configuration
Rule: ItThis
needs
parameter
indicates
thequality
to consider the service
minimum
uplinkcapacity.
SIR target, it
and cell uplink
is
aimed
to
avoid
SIRThis
target
Adjustment
Suggestion:
Parameter Function:
decreasing
too much.
If this parameter
is too
parameter
indicates
thebig, it
Configuration
Rule:
Ittarget
needs
might make bit
the
SIRlevels
guaranteed
rate
of
to
consider
the
service
quality
too big, and
makeforthe
uplink
HSDPA
services
limiting
and
celltoo
uplink
power
big,resource
itcapacity.
would affect
HSDPA
GBR
Adjustment
Suggestion:
the
cell
capacity.
consumption.
If
is
it
If this
this parameter
parameter
is too
too
small,
Configuration
Rule:
Thebig,
GBR
might
it mightmake
makethe
theSIR
power
too
levels
setting
need
totarget
cannot
decreased
to a of
small
tobe
satisfy
the This
consider
the
requirement
Parameter
Function:
suitable
value,
and
make
the
requirement
of uplink
receiver
different
HSDPA
GBR
parameter
indicates
the
power
cannot
be
decrease
demodulation,
and
it
would
resource
consumption
limit to
guaranteed
bit rate
level
a
suitable
level,
it
would
affect
the
service
quality
and
for different
HSDPAservices
GBRaffect
number
of HSDPA
the
cellcoverage.
capacity.
uplink
services,
and
the
services
for
limiting
HSDPA
GBR
If
this
parameter
too small,
with
similar
GBR is
resource
resource
consumption.
itParameter
might
need
long
time
to
Function:
This
consumption
should
be
Configuration
Rule:
How
increase
the
SIR
target
parameter
indicates
UE from
HSallocated
into
the
same
GBR
many
HSDPA
GBR
levels
is
the
minimum
value
to
normal
DSCH
required
power
upper
level.
GBR
levels
relationship
based
on
the
requirement
of
working
level,
and
affect
the
limit
for limiting
HSDPA
GBR
is HsGBRLev[0]<
Parameter
Function:
The
Function:
This
parameter
different
HSDPA
GBR
service
quality.
resource
consumption.
HsGBRLev[1]<
index
indicate
the value
of the
indicates
the forced
queue
resource
consumption
limit
Configuration
Rule:
ItGBR
needs
HsGBRLev[2]<...<
parameters
relative
to
HSDPA
switch
for AMR
service.
Even
for different
HSDPA
to
consider
the
requirement
HsGBRLev[HsGBRLevNumGBR
resource
consumption
though
there
is
nolevels
queue
services.
Too
few
of
different
HSDPA
GBR
1].
Usually,
the
bigger
GBR
limit.
information
or
no
queue
cannot meet the requirement,
resource
consumption
limit
level
is,
the
bigger
HS-DSCH
Function:
This
parameter
Configuration
Rule:
Different
ability
in
the
AMR
RAB
but too many levels is not
for
different
HSDPA
GBR
Required the
Power
UE the
indicates
forced
queue
configurations
of Per
limiting
assignment
information,
necessary.
services
Weight
threshold
switch
for
CS64k
service.
HSDPA
GBR
resource
AMR
RAB
will
also
have the
The bigger
this
parameter
is,
The
services
with
similar
(UEHsReqPwrUplim[]).
Even
though
is nolevels.
consumption
parameters
with
queue
ability
ifthere
theGBR
AMR
the more
HSDPA
GBR
resource
consumption
queue
information
orisno
different
index.
forced
queue
switch
The smaller
this
parameter
is,
should
be
allocated
into
the
queue
ability
in
the
CS64k
Adjustment
Suggestion:
opened.
the less HSDPA GBR
levels.
same
GBR
level.
And
RAB
assignment
information,
Primary
key
canthe
not
beGBR
Related
Factor:
AMR
levels
relationship
is
the
CS64k
RAB willcall
also
have
modified.
service
successful
rate,
HsGBRLev[0]<
the
ability ifofthe
CS64k
the queue
differentiation
queue
HsGBRLev[1]<
forced
queue
is
ability for
AMRswitch
services
HsGBRLev[2]<...<
opened.
If the function is turned on,
HsGBRLev[HsGBRLevNumRelated
thehave
CS64k
the
AMRFactor:
RAB will
the
1].
Usually,
the
GBR
service
successful
rate,
queue
ability
in bigger
anycall
case
so
is,
the
differentiation
of queuecall
thatthe
thebigger
rate ofHS-DSCH
successful
Function:
This parameter
Required
Power
Per
ability
CS64k
services
will be for
increased
but UE
the
indicates
the
maximum
time
Weight
threshold
If
the
function
is
turned
differentiation of queue on,
ability
in
the
true
queue
when
(UEHsReqPwrUplim[]).
So
the
CS64k
RAB
will
have
for AMR services can not the
be
service
be forced
into
queue.
usuallyability
queue
in any
case
so
achieved.
Parameter
Function:
This call
Related
Factor:
successful
UEHsReqPwrUplim[0]<=UEH
that
rate
ofissuccessful
If
thethe
function
turned
off,
parameter
indicates
the
call
rate,
access
time
delay
sReqPwrUplim[1]<=UEHsReq
of
CS64k
will
be
increased
the
AMR
RAB
will
not
have
power
offset
of HS-DPCCH
If
the
parameter
value
PwrUplim[2]<=...<=UEHsReq
but
the
differentiation
ofis
the
queue
ability
when
ACK
domain
relative
tothere
larger,
it
will
improve
the
PwrUplim[HsGBRLevNum-1].
queue
ability
for
CS64k
is
no queue
information
or no
DPCCH
when
UE
aaffect
successful
call
rate
but
services
can
not
behas
achieved.
queue
ability
in
the
AMR
RAB
single
link or
isisindelay.
the This
intrathe
access
time
Parameter
Function:
If
the
function
turned
off,
assignment
information
and
NodeB
handover.
If
the
parameter
value
parameter
indicates
the
ACKthe
CS64k
RAB
will
not
as
the
result
the
rateThe
ofishave
Configuration
Rule:
smaller,
it
will
improve
the
NACK
repetition
factor,
the
queue
ability
when
there
successful
call will
be
parameter
value
isbut
configured
access
time
delay
affect
indicating
the
number
of
is
no queue
information
or no
decreased
but
differentiation
to
satisfy
the
requirement
of
the
successful
call
rate.
consecutive
repetitions
of
queue
ability
in
the
CS64k
of
queue ability
forreceive
AMR the
probability
of
right
This
parameter
configuration
ACK
and
NACK.
RAB
assignment
information
services
can
be achieved.
and
capacity.
value
be
less
than
orof
Configuration
Rule:
Itrate
needs
and system
asmust
the result
the
If
the
parameter
value
is
equal
the
timer
of
CN
waiting
to
consider
the
system
successful call of CS64k too
will
large,
it would
waste the
for
RAB
response
capacity
and service
quality.
be decreased
but
uplink
power, increase
the
UL
If
the ACK-NACK
repetition
differentiation
of queue
ability
interference
and
reduce
the
factor
is tooservices
big, ACK
or be
for CS64k
can
UL
capacity
ofdata
cell. feed back
NACK
of new
achieved.
If the
parameter
is too
to
network
wouldvalue
be reduced,
small,
it would
affect
and it would
affect
thethe
system
receiving
capacity. quality of the HSDPCCH
ACK domain.
If the ACK-NACK
Repetition
Factor is too small, probability
of ACK or NACK be decoded
rightly would be small, and it
would affect the service
quality.
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
according to the impact to

downlink
throughput
Parameter
Function: and
This
uplink
interference
parameter
indicatesbecause
the
of
different
Feedback
power
offsetCQI
of HS-DPCCH
Cycle.
CQI domain relative to
CQI
Feedback
Cycle
DPCCH
when UE
hasand
a CQI
Repetition
Factor
determine
single link or is in the intrathe timehandover.
of same CQI to be
NodeB
Parameter
This
feed
back. Function:
Configuration
Rule: The
parameter
indicates
the
CQI
If
the CQI Feedback
Cycle
is
parameter
value is configured
repetition
factor.
too
big,
UE
would
wait
long
to
make sure that
the HSConfiguration
Rule:
time
to send
the
newConfigure
CQI,be
the
DPCCH
CQI
domain
can
CQI
Repetition
Factor
HSDPA
scheduling
would
be
received rightly
and
avoid
according
the
impact
to
not exact, to
and
it would
affect
generating
unnecessary
HSDPA
service
quality
the
downlink
throughput.
power
waste.
because
ofFeedback
different CQI
If
the
CQI
is
The
parameter
valueCycle
is
Repetition
Factor.
too
small,
the
CQI
would
configured
to satisfy
the
Parameter
Function:
This
CQI
Feedback
Cyclethe
and CQI
more
likely indicates
toofreflect
requirement
probability
parameter
the
E-of
Repetition
Factor
determine
actual
quality
ofpower
the channel,
Parameter
Function:
This
righttime
receive,
coverage
and
DCH
reference
offset.
the
of
same
CQI
to
be
and
the capacity.
HSDPA
scheduling
parameter
the
system
It
is used
toindicates
estimate
the
feed
back.
would
be
more
exact,
but it
quantified
E-DPCCH/DPCCH
If
the
is configured
uplink
load
increase
caused
If
the parameter
CQI
Repetition
Factor
is
would
generate
more
uplink
power
offset
configured
for is
too
large,
more
interference
by
the
MAC-e
PDUs
which
too
big,
UE
would
wait
long
interference.
10ms
will
generated
andCQI,
the the
not
decoded.
timebe
toE-TTI.
send the new
Configuration
Rule:
This
capacity
will
be
reduced.
Configuration
Rule:
It
needs
Parameter
Function:
This
HSDPA scheduling would be
parameter
value
is configured
configured
If the
parameter
is
to
consider
theitsystem
parameter
indicates
theaffect
not
exact,
and
would
to
ensure
the
missed
detect
too
small,
the
quality
of
the
capacity
and
servicequality.
quality.
quantified
E-DPCCH/DPCCH
the HSDPA
service
rate
less
than
0.2%
and
avoid
receiving
will
be
bad.
The
this
parameter
is,is
power
offset
configured
for
If thebigger
CQI
Repetition
Factor
generating
unnecessary
the
bigger
E-DPDCH
power,
2ms
E-TTI.the probability of
too small,
power
and
less system
capacity.
Configuration
Rule:
This
CQI the
bewaste.
decoded
rightly
would
If
this
parameter
is
too
big, EThe
smaller
this
parameter
is,
parameter
value
is
configured
be small, it also would affect
DPCCH
power
would
be
too
the
smaller
E-DPDCH
power,
to
the
missed
detect
theensure
HSDPA
service
quality.
big,
detect
rateand
would
and miss
the
quality
of avoid
thebe
rate
lessworse
than
0.2%
small,
but
it
would
generating
Parameter
Function:
This
service.
generating unnecessary
unnecessary
interference,
parameter
indicates
the
power waste.
and
the system
allocation
method
If
thisreduce
parameter
isfor
tooHSPA
big, Ecapacity.
total
power.
DPCCH
power would be too
If
themiss
parameter
is too
small,
Configuration
Rule:
big,
detect
rate
would
be
E-DPCCH
power
would
be is
RNC
static
assigning
mode
small, but it would generating
too
small,
theinterference,
miss
easy
to achieve,
butdetect
not
unnecessary
rate
will
be
too
big,
service
flexible.
and reduceFunction:
the system
Parameter
It is the
quality
requirement
can not
RNC
assigning
capacity.
switchdynamic
of
HSDPA
GBR
be
satisfied.
mode
is aconsumption
method
Parameter
Function:
If
the
parameter
is of
tooThis
small,
resource
limit
assigning
total
parameter
indicates
thepower
E-DPCCHHSDPA
power
would
be
function.
by
and
Node
B do not
power
offset
HS-DPCCH
tooRNC,
small,
theof
miss
detect
Configuration
Rule:
Parameter
This
need
to allocate
theservice
power
ACK
domain
relative
to
rate will
be Function:
too
big,
Considering
the
cell
capacity,
parameter
indicates
the
itself.
DPCCH
when
UE
is
in
not
ifquality
there requirement
is a need to can
limitinterthe
power
offset
of
HS-DPCCH
NodeB
assigning
mode
can
Node
B
handover.
be
satisfied.
resource comsumption of
CQI
tothe
makedomain
fullGBR
userelative
of
power
Configuration
Rule:
The
HSDPA
service,
DPCCH
when
UE
is
in interresource
with
best
effort.
parameter
value
configured
switch should
be is
turned
on.
NodeB
handover.
to
satisfy thethe
requirement
Considering
quality of of
Configuration
Rule:receive
Thethe
probability
of right
HSDPA GBR
services,
parameter
value
is
configured
and
system
capacity.
switch
should
be turned
off.
Parameter
Function:
to
ensure
that
thevalue
HS-This
If the
parameter
is too
parameter
indicates
DPCCH
CQI
domain
can be
large, it would
waste the
the
power
offset
of
HS-DPCCH
received
rightly
and
avoid
uplink power, increase the UL
NACK
domain
relative
generating
unnecessary
interference
and
reducetothe
DPCCH
when
UE
power
waste.of cell.is in interUL capacity
Node
B
handover.
The
value
If theparameter
parameter
valueisis too
Configuration
Rule:
configured
to satisfy
the
small, it would
affectThe
the
parameter
value
is
configured
requirement
of
probability
receiving quality of the HS-of
to
satisfy
the requriement
of
right
receive,
coverage
DPCCH
ACK
domain. and
probability
of right receive
system capacity.
and
capacity.
If thesystem
parameter
is configured
If
the
parameter
value is too
too large, more interference
large,
would waste
will beitgenerated
andthe
the
uplink
power,
increase
the UL
capacity
will be
reduced.
interference
and is
reduce
the
If the parameter
configured
UL
ofquality
cell. of the
too capacity
small, the
If
the parameter
value is too
receiving
will be bad.
small, it would affect the
receiving quality of HSDPCCH NACK domain.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES

DPCCH when UE has a
Parameter
Function: This
Configuration
Rule: The
parameter indicates
the
parameter
value
is configured
power offset for scheduling
to
satisfy thewhen
requriement
information
10ms E-of
probability
of
right
receive
TTI.
and
system
capacity.
Configuration Rule: The value
If the
value
is too
Parameter
Function:
This
of
thisparameter
parameter
is used
to
large,
would
waste
the
parameter
indicates
ensureit the
10ms
TTIthe
uplink
power,
increase
the
power
offsetinformation
for
scheduling
scheduling
be UL
interference
and
reduce
information
when
2ms
E-TTI.
demodulated rightly, andthe
UL
capacity
ofRule:
cell. The
Configuration
value
Parameter
Function:
This
avoiding
unnecessary
power
If
the
parameter
value
is
too
of
this
parameter
is
used
to
parameter
indicates
the
waste.
small,
it
would
affect
the
ensure
the
2ms
TTI
algorithm
of
load
decreasing
If
this
parameter
is
too
big,
Parameter Function: This it
receiving
quality
of
HSscheduling
information
be
during
common
overload
for
will waste
power,
and
reduce
parameter
is
TPC
error
rate
DPCCH
NACK
domain.
demodulated
rightly,
and
HSDPA
the system
capacity.
used
forcell.
F-DPCH
OLPC.
avoiding
unnecessary
power
Configuration
Rule:
The
If this parameter
is too
small,
Configuration
Rule:
It needs
waste.
configuration
of
this
theconsider
scheduling
information
to
uplink
channel
If
this
is too
it
parameter
issystem
based
on big,
will
notparameter
be demodulated,
and
quality
and
downlink
will
waste
power,
and
reduce
whether
there
is
requirement
affect
the
service
quality.
capacity.
the
system
capacity.
that
priority
of HSvalue
subscribers
If
the
parameter
is too
If
this entirely
parameter
is too
small,
were
higher
than
R99
large,
F-DPCH
TPC
error
rate
the
scheduling
information
subscribers.
would be high, it would affect
will
notchannel
be
and
If
there
wasdemodulated,
thequality.
requirement
uplink
affect
the
service
quality.
that
priority
of
HS
subscribers
were
entirely
higherpower
than R99
small,
the F-DPCH
Parameter
Function:
MBMS
subscribers,
itbig,
could
configure
would
be
too
it
would
related
parameter.
Maximum
the
parameter
with downlink
0 which
reduce
the system
FACH
power
adjustment
Parameter
Cell
means
onlyFunction:
R99
subscriber
capacity.
switch
MBMStodownlink
Identity.
can be for
selected
decrease
load
Configuration
Rule: CId of
load control
when overload
Configuration
Rule:
different
cells of
the This
same
happened.
parameter
needs
to
consider
RNC
should
be
different.
Parameter
Function:
This
If there wasFunction:
no particular
Parameter
the
requirement
of
load
Adjustment
Suggestion:
parameter
indicates
the CId
requirement
of HS
Downlink
switch
for
shielding
reduce
and
affect
the
of
different
cells
of
theservice
same
threshold
for
releasing
from
subscribers
and
R99
rate
reduction
quality
as
little
as
possible
at
RNC
should
be
different.
downlink
overload.
subscribers,
it
could
configure
Configuration
Rule:
This
the
same
time
when
overload
Configuration
Rule:
the
parameter
withto1The
which
parameter
needs
consider
happen.
parameter
is
configured
to
means
select
subscriber
to
the
requirement
of load
Parameter
Function:
This
Turn
this
function,
it can
avoidon
the
ping-pong
between
decrease
load
onlythe
consider
reduce
and
affect
service
parameter
indicates
the
decrease
the
cell
load
overload
state
and
normal
the apply
priority
of
theby at
quality
as
few
as
possible
maximum
number
of
DRBC
reduce
the
maximum
FACH
state,
and
it also
should
do
traffics
when
overload
the
same
time
when
overload
steps
of
decreasing
data
rate
power
when
overload
best
effort
to
ensure
service
happened.
happen.
for
the
selected
service
each
happen,
but
it
might
affect
the
quality.
Turn
on thedownlink
function
of online
rate
time
when
overload
performance
quality
of
If
the parameter
value is too
reduction,
rate
reduction
is
Parameter
Function:
happens.
MBMSitservice.
large,
is
easy
to
the
the
first
step
when
overload
Downlink
switch
forleave
shielding
Configuration
Rule:
For
Turn
off
this
function,
quality
overload
state,
and thethe
happen,
itMBMS
can reduce
forced
drop.
overload
control
orbe might
of
online
service
overload
state
will
load
effectively,
and
the
Configuration
Rule:
This
congestion
control,
not
be
affected,
but
cell
occurred
again
easily.
impact
to
online
service
iswith
the
parameter
needs
to
consider
DlDnMaxStg
is be
associate
capacity
would
reduced.
If
the
parameter
value
is too
minimum.
the
requirement
of
load
MaxNumUeOfDecRat,
they
small,
itand
is
hard
to the
leave
the
Turn
off
the
function
ofservice
rate
reduce
affect
are
used
to control
the
rate
of
overload
state,
and
the
reduction,
other
method
toof
quality
as few as
possible
at
rate
reduction.
The
value
service
quality
will be
reduce
load
would
beoverload
done
the
same
time
when
this
parameter
should
make
affected.
when
overload
happen,
and
happen.
the load be reduced as quick
the
impact
to
online
service
Turn
on
the
function
of
forced
as possible and make the is
big. drop, when
call
overload
minimum
impactcell
to the
online
Adjustment
Rate
happen,
it Suggestion:
candownlink
not choose
services ifwhen
reduction
is
the
basic
method
Ues
to decrease
data rate,
overload
or congestion
to
decrease
the load
of the
forced
handover
or other
happen.
overload
control,
this
methods
to
reduce
the
If the parameter valuemethod
isload,
too
can
decrease
the
load
with
the
forced
drop
is
the
final
large, it would cost short
time
minimum
to the
the
online
method
toeffect
ensure
cell
to
reduce
the
load
to normal
service.
rate
reduction
load
be
reduced,
but itis
state,can
butSo
it would
reduce
necessarily.
would
increase
the call drop
overmuch
load unnecessarily,
rate.
and it affect service quality.
Turn
the function
ofisforced
If the off
parameter
value
too
call
drop,
when
cell
overload
small, it would cost long time
happen,
it can
nottochoose
to reduceif the
load
normal
Ues
state.to decrease data rate,
forced handover or other
methods to reduce the load,
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Don't Care
No
YES
Don't Care
No
YES
Don't Care
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
the requirement of load

Parameter
reduce andFunction:
affect theThis
service
parameter
indicates
the at
quality as few
as possible
maximum
number
of overload
selected
the same time
when
Parameter
Function:
This
UEs
which
are
forced
to be
happen.
parameter
indicates
the
dropped
each
time
when
Turn on the function of forced
maximum
number
ofoverload
selected
downlink
happens.
handover,overload
when cell
UEs
forced
to
be
handed
Configuration
Rule:
value
happen, if it can
not The
choose
over
orparameter
radio linksdata
to be
of
this
can
make
Ues
to
decrease
rate,
deleted
each
time handover
when
the
system
equipment
run in
forcing
some
Ues
downlink
overload
happens.
normal
state
as
quick
as
to the neighboring cell with
Configuration
Rule: the
The value
possible
make
the sameand
coverage
can
of
this
parameter
shuld
make
minimum
to the
online
reduce theimpact
cell load
rapidly,
the
cell
return
to
normal
state
services
downlink
but it will when
increase
the load
of
as
quick
as
possible
and
overload
happen.
Parameter
Function:
Thisif
the neighboring
cell, and
make
the minimum
impact
The
larger
value
parameter
indicates
the
the handover
fail,the
the
call to
the
online
services
when
parameter
is
configured,
the
threshold
of
the
downlink
would drop.
overload
happen.
Parameter
Function:
This
more
resource
is released,
common
overload.
Turn off
the
function
of
forced
The
larger when
value
theThe
parameter
indicates
the
the
rapider
theRule:
load
to
be
Configuration
handover,
cell
overload
parameter
is
configured,
the
threshold
of
the
downlink
reduced.
if the
of
parameter
is value
configured
happen, ifBut
itvalue
can
not
choose
more
UEs
are
handover
to
serious
overload.
the
parameter
is
too
big,
it
to
make
sure decease
load it
Ues
to decrease
data rate,
other
cells,
and
the
more
Configuration
Rule:
TheUE to
would
select
too
many
immediately
when
cell
can not
force
Ue
handover,
resource
is
released
in
parameter
value
is
configured
drop,
it
would
have
serious
downlink
load
is
high
tothis to
and only use other method
cell,
theto
rapider
thestability
cell
load
to
ensure
decease
load
impact
the
online
services.
ensure
the
system
reduce
load.
return
to
normal
state.
But
immediately
when
cell
The do
smaller
theensureif
and
best value
effort to
the
value
of
the
parameter
downlink
load
is
high
parameter
is configured,
stable
service
quality.to theis
too
big,
it
would
tootoo
ensure
the
system
stability
less
resource
is
released,
the
If the parameter select
value
is
many
UEs
to
handover,
it
and
do
best
effort
to
reduce
slower
the
load
to
be
large, it will be hard to trigger
would
serious
impact
to
the
callhave
dropthe
caused
by load
reduced.
decreasing
downlink
the
online
services.
overload
control.
immediately
when the load of
The
value
the
If
thesmaller
parameter
value
is ittoo
system
is very
high,
and
will
parameter
is
configured,
large,
it
would
be
hard
to the
affect the system stability.
less
are handover
trigger
decreasing
the istotoo
If theUEs
parameter
value
other cells,
and
theeasy
less to
downlink
load
small,
it will
beimmediately
too
resource
is
released
when
load
of system
is
triggerthe
decreasing
thein this
Parameter
Function:
This
cell,
the overload,
slower
theand
cell
serious
itload
would
downlink
load, and
it will
parameter
indicates
the
reserved
parameter
return
to normal
affect
system
stability.
affect the
the
servicestate.
quality.
common
overload
threshold
If the parameter
value
is too
of
the HS-DSCH.
small,
it would be easy to
Configuration
Rule:the
The value
trigger decreasing
of
this
parameter
must
downlink load, and forcing
ensure
method
load
call
dropthe
is
the only of
method
Parameter
Function:
This
reserved
parameter
decrease
done incontrol,
time it
of serious be
overload
parameter
indicates
the
when
HSDPA
too
would the
increase
theload
callis
drop
threshold
for releasing
from
high
to
ensure
the
system
rate.
HS-DSCH
overload.
stability
and doRule:
bestThis
effort to
Configuration
ensure
stable
service
quality.
parameter
is used to reduce
reserved
parameter
If
the
common
overload
the probability of HSDPA cell
threshold
for
is too
Parameter
Function:
This
state
return
toHS-DSCH
HSDPA
high,
it would
make
the
parameter
indicates
the cell
overload
state
immediately
load
a very
high
levelto
maximum
number
of services
after reach
the load
is decreased
but
no
load
decrease
method
whose
rates
will
be
normal state.
in
action
when
there
were
decreased
each
time
when
The
higher
of the
recover
large
number
of
HSDPA
congestion
takes
place.
threshold for HS-DSCH UEs
in
the cell,the
andhigher
it willFor
affect
Configuration
Rule:
overload,
the
system
stability.
overload
or cell
probabilitycontrol
of HSDPA
But
the common
overload
congestion
control,
stateif return
to HSDPA
threshold
for
HS-DSCH
iswith
too
DlDnMaxStg
is
associate
overload state immediately
low,
it
would
reduce
the
MaxNumUeOfDecRat,
they
after the load is decreased to
quality
of
thecontrol
onlinethe
service
are
used
to
rate of
normal
state.
when
the cell
load
isvalue
very of
low
rate
The
The reduction.
lower
of the
recover
and
not
need
to
be
this
parameter
should make
threshold
for HS-DSCH
decreased.
the
load be
reduced
as quick
overload,
the
more resource
Configure
requirement
ofload
this
as
possible
and
make
need to be released forthe
parameter
is:
minimum
impact
to
the
online
reduce to normal state from
HsdsOverLdThr>
services
when downlink
HSDPA
overload
state, and
HsdsRecoverThr>
DlOverLd>
overload
or congestion
more online
service's
quality
DlAlrmLd;
happen.
to be affected.
HsdsRecoverThr
>= is too
If
the parameter
value
Configure
requirement:
NodeBSafeThr>
=DlOverLd.
large,
it
would
cost
HsdsOverLdThr> short time
to
reduce the load to
normal
HsdsRecoverThr>
DlOverLd>
state,
but it would reduce
DlAlrmLd;
overmuch
load unnecessarily,
HsdsRecoverThr
>=
and
it affect service
quality.
NodeBSafeThr>
=DlOverLd.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
N/A
Fixed
No
YES
Fixed
No
N/A
Fixed
No
YES
Fixed
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
transferred Function:
to FACH from
Parameter
Switch
DCH
or HSDPA when the cell
of Interactive
is
in the overload
state.
Class/Background
Class
Parameter
Function:
This
Configuration
Rule:
value
RAB->FACH
for
Overload
parameter indicates The
the safe
of
this
parameter
shuld
make
Configuration
Rule:
It
needs
threshold of transmission
the
cellpower
return
torequirement
normal
to
consider
thefor
carrier
Node Bstate
to
as load
quickreduce
as possible
and the
of
and affect
use.
make
the
minimum
impact
service
quality
as little
as to
Configuration
Rule:
This
the
online
services
when
possible
at isthe
same
time
parameter
used
to ensure
overload
happen.
when
happen.
Node overload
B use
HSDPA
power
If
the on
parameter
too
Turn
the function
ofis total
safely,
when
the value
HSDPA
large,
it
would
cost
short
time
transfer
I/B
service
to
power is in "Node B Assigning
to reduce
theit state,
load
toafter
normal
CELL_FACH
rate
Mode".
And
needs
to
state,
butthe
it Function:
would
reduce
decreasing
and
forced
consider
throughput
of
Parameter
This
Parameter
Function:
Uplink
overmuch
load
unnecessarily,
handover
cannot
reduce
the
HSDPA
service
as
well.
parameter
indicates
the
switch
fortoshielding
rate
and
it parameter
affect
service
quality.
cell
load
normal
state,
If
this
is
too
small,
threshold
for
releasing
form
reduction.
If
the
parameter
is tooI/B
transfer
the
Ues value
only
have
the
total
HSDPA
power
uplink
overload.
Configuration
Rule:
Thiswould
small,
it
would
cost
long
time
service
to
CELL_FACH
state
be
too small,
and
it would
Configuration
Rule:
The
parameter
needs
to
consider
to
reduce
the
load
to
normal
is
a
method
to
reduce
the
affect
the
throughput
of
parameter
is configured
tocell
the
requirement
ofaffect
load the
state.
load,
but
it
would
HSDPA
service.
avoid the
ping-pong
between
reduce
and
affect
the
service
service
quality,
and
it might
If
this parameter
is
too
big,at
overload
state
and
normal
quality
as
few
as
possible
cause
RACH
orofFACH
the
total
power
Node
Bdo
state,
and
it
also
should
the
samecongestion.
time when overload
channel
would
be
too
big,
and
it
would
best
effort
to
ensure
service
happen.
Parameter
Function:
This
Turn
off
function
of
affect
thethe
system
stability.
quality.
Turn
on
the
function
of rate
parameter
indicates
the
transfer
I/B
service
to
If
the parameter
valueUplink
is too
reduction,
rate
reduction
is
Parameter
Function:
maximum
number
ofafter
DRBC
CELL_FACH
state,
rate
large,
it
is
easy
to
leave
the
the
first
step
when
overload
switch
fordecreasing
shielding
forced
steps
of
data
decreasing
and
forced
overload
and thetherate
happen,
itstate,
can reduce
drop.
for
the
selected
service
each
handover
cannot
reduce
the
overload
stateRule:
will
bethe
load
effectively,
and
Configuration
This and
time
when
uplink
overload
cell
load
to
normal
state,
occurred
again
easily.
impact
to
online
service
is the
parameter
needs
toservice
consider
happens.
cannot
transfer
I/B
to
If
the
parameter
value
is too
minimum.
the
requirement
of
load
Configuration
Rule:
The
value
CELL_FACH
state,
other
small,
itand
is
hard
to the
leave
the
Parameter
Function:
Uplink
Turn
the
function
of
rate
reduce
affect
service
of
thisoffparameter
should
methods,
forcing
call
drop
for
overload
state,
and
the
Switch
for
Shielding
Forced
reduction,
other
method
quality
as will
fewbe
as
possible
make
the
load
be
reduced
as
example,
use
to toat
service
quality
will
be
Handover
reduce
load
would
beoverload
done
the
same
time
when
quick
as
possible
and
make
reduce
the
load,
which
can
affected.
Configuration
Rule:
This
when
overload
happen,
and
happen.
the
minimum
impact
to the
reduce
load more
quickly
but
parameter
needs
to
consider
the
impact
to
online
service
Turn
on
the
function
of
forced
online service
services.
affect
quality more is
the
requirement
of
load
big.
call
drop,
when cell
overload
If
the
parameter
value
is too
seriously.
Parameter
Function:
This
reduce
and
affect
the
service
Adjustment
Suggestion:
Rate
happen,
if it can
notshort
choose
large,
it
would
cost
time
parameter
indicates
the
quality
as
few
as
possible
reduction
is
the
basic
method
Ues
to decrease
data
rate,at
to
reduce
the
load
to
normal
maximum
number
ofother
selected
the
same
overload
to
decrease
thewhen
load
of
the
forced
handover
orreduce
state,
but
ittime
would
UEs
which
are
forced
toload,
be
happen.
overload
control,
this
method
Parameter
Function:
This
methods
to
reduce
the
overmuch
loadtime
unnecessarily,
dropped
each
when
Turn
thedrop
function
offinal
forced
can
decrease
the
with
parameter
indicates
the
the
forced
is load
the
and
iton
affect
service
quality.
uplink
overload
happens.
handover,
when
cell
minimum
to
the
online
maximum
number
ofoverload
selected
method
toeffect
ensure
the
cell
If
the
parameter
value
is
too
Configuration
Rule:
The
value
happen,
ifbeitare
can
notlong
choose
service.
So
rate
reduction
UEs
which
forced
to time
be
load
can
reduced,
but
itis
small,
it
would
cost
of
this
parameter
can
make
Ues
to
decrease
data
rate,
necessarily.
handed
over
each
time
when
would
increase
theto
call
drop
to
reduce
the
load
normal
the
system
equipment
run in
forcing
some
Ues
handover
uplink
overload
happens.
rate.
state.
normal
state
as
quick
to
theoff
neighboring
cell
with
Configuration
Rule:
The
value
Turn
the function
ofas
forced
possible
and
make
the
the
same
coverage
can
of
parameter
shuld
make
callthis
drop,
when cell
overload
minimum
to the
online
reduce
rapidly,
the
cell the
return
toload
normal
state
happen,
ifimpact
itcell
can
not
choose
services
when
downlink
but
it
will
increase
the
load
as
quick
as
possible
and
Ues to decrease
dataThis
rate, of
Parameter
Function:
overload
happen.
the
neighboring
cell,
and if to
make
the
minimum
impact
forced
handover
or other
parameter
indicates
the
The
larger
value
the
handover
fail,
the
the
online
services
when
methods
to
reduce
the
load,
threshold
ofisthe
uplinkcall
parameter
configured,
the
would
drop.
overload
happen.
there
is
none
method
to
common
overload.
more
resource
is
released,
Turn
off
the
function
of
forced
The
larger
theThe
reduce
the value
cellRule:
load,
and it
Configuration
the
rapider
the
load
to
bethe
handover,
when
cell
overload
parameter
is
configured,
affect
the cell
stability.
parameter
value
is
configured
reduced.
But
ifhandover
the
value
of
happen,
if
it
can
not
choose
more
UEs
are
to
to
ensure
decease
load
the
parameter
ismore
too
big,
it it
Ues
to
decrease
data
rate,
other
cells,
and
immediately
when
cell uplink
would
select
too
many
UEs
can
not
force
Ue
handover,
resource
is released
inthe
this to
load
is
high
to
ensure
drop,
it
would
have
serious
and
only
use other
cell,
thestability
rapider
themethod
cell
loadto
system
and
do best
impact
to
the
online
services.
reduce
the
load.
return
to
normal
state.
But
if
effort
to ensure
stable
The
smaller
value
the service
the value
of the
parameter
is
quality.
parameter
is configured,
the
too
big,
it would
select
tootoo
If
the
parameter
value
is
less
resource
is released,
many
UEs
to
it the
large,
itthe
willload
behandover,
hard
to trigger
slower
to
be
would
have the
serious
impact
decreasing
uplink
load to
reduced.
the
online
services.
immediately when the uplink
The
value
the high,
load smaller
of system
is very
parameter
configured,
the
and
it mightisaffect
the system
less
UEs are handover to
stability.
other
cells, and the
lessis too
If the parameter
value
resource
is
released
in this
small, it will be too easy
to
cell,
the
slower
the
cell
load
trigger decreasing the uplink
return
to normal
state.the
load, and
it will affect
service quality.
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A

parameter value is configured
to ensure decease load
immediately when cell uplink
load is high to ensure the
Parameter
Function:
This
system stability
and do
best
parameter
indicates
the
effort to reduce the call drop
upper
of the downlink
causedlimit
by overload
control.
high
used invalue
the R99
If theload,
parameter
is too
CS
AMR
BLER
target
auto
large,
it
would
be
hard
to
adjustment
function.
trigger decreasing
the
uplink
parameter
indicates
the
Configuration
Rule:
It needs
load immediately
when
the
upper
limit of the
uplink
high
to
consider
the
AMR
service
load of
system
is R99
uplink
load,
used
in the
CS
quality
and
system
capacity.
serious
overload,
and
it would
AMR
services
BLER
target
The
smaller
this
parameter
affect
the
system
stability.
auto adjustment function. is,
the
easier
for downlink
If
the
parameter
value
isAMR
too
Configuration
Rule:
It needs
service
use
bigger
small,
it to
would
be
easy
to
to
consider
thethe
AMR
service
BLER
and itthe
would
trigger target,
decreasing
uplink
quality
and system
capacity.
affect
AMR
service
quality.
load,smaller
and forcing
call drop isis,
The
this parameter
The
bigger
thisuplink
parameter
is,
only
method
of serious
the easier
for
AMR
Parameter
Function:
MBMS
the
easier
for
downlink
AMR
Function
of
this
parameter:
It
overload
control,
it
would
service parameter.
to use the OLPC
related
This
service
to
use
the
smaller
indicates
the
switch
of
increase
the
call
drop
rate.
parametersindicates
for biggerthe
BLER
parameter
BLER
andservice
it used
wouldin
dropping
MBMS
target,
and
it would
affect
power target,
of
SCCPCH
to
affect
system
capacity.
MBMS
overload
control. when
AMR MTCH
service
quality.
bear
information
Factors
ofinconsideration:
The
bigger
this
is,
receiving
the parameter
selective
Parameter
Function:
MBMS
Downlink
load,
the ratio
of
the
easier
for
uplink
AMR
combining
mode.
related
parameter.
This
MBMS
service
drop.
service
to use
the
OLPC
Configuration
Rule:
Itthe
needs
parameter
indicates
If
the
operator
turn
on
this
parameters
for
smaller
to
consider
the
system
power
of RNC
SCCPCH
usedBLER
to
function,
can
drop
the
target,
and
it
would
affect
capacity
andinformation
service quality.
bear
MTCH
when
MBMS
services
in the las is,
system
capacity.
The
larger
receiving
inthis
theparameter
soft
the
bigger
SCCPCH
power
combining
mode.
Parameter
Function:
MBMS
which
bear
MTCH
when
Configuration
Rule:This
It needs
related
parameter.
receiving
in the
the system
selective
to
consider
parameter
indicates
the
combining
mode.
And
system
capacity and
service
quality.
threshold
to
judge
if
the
capacity
willthis
beparameter
reduced.local
The
larger
cell
is in half-island
status.is,
the
smaller
this
parameter
is,
the
bigger
SCCPCH
Parameter
Function:
MBMS
Configuration
Rule: Itpower
needs
the
smaller
SCCPCH
power
which
bear
MTCH
when
related
parameter.
This
to
consider
the system
which
bear
MTCH
when
receiving
in
the
soft
parameter
indicates
the
capacity
and
service
quality.
receiving
in
the
selective
combining
mode.
And
system
threshold
to
judge
if
the
cell is
If
the
parameter
is
too
large,
combining
mode.
And service
capacity
will
be reduced.
in
island
status.
the
cell
will
more
easily
to
use
quality
will be
affect.
Parameter
Function:
The
smaller
this
parameter
is,
Configuration
Rule:
ItMBMS
needs
the power
configured
for
halfrelated
parameter.
This
the
smaller
SCCPCH
power
to
consider
the
system
island
mode,
and
it might
parameter
indicates
the
which
MTCH
when
capacity
service
quality.
waste bear
theand
power
and
affect
transmission
power
of
MICH.
receiving
in
the
soft
If
the
parameter
is
too
large,
system capacity.
Configuration
Rule:
The
combining
mode.
And
service
the
cell
will
more
easily
to use
If the parameter is too small,
parameter
value
is
configured
quality
be
affect.
the
power
forto use
the
cellwill
willconfigured
more
easily
to
the
UE in
cell
island
mode,
and
it might
Parameter
Function:
This
theensure
power
configured
foredge
can
receive
the
MICH
rightly
waste
the
power
and
affect
parameter
indicates
the
normal combining
mode,
and
and
avoid
generating
Parameter
Function:
This
system
capacity.
balancing
typethe
of the
DL of
it might affect
quality
unnecessary
waste
power.
parameter
indicates
thesmall,
AICH
If
the parameter
is too
power.
MBMS
services.
If
the
parameter
value
istovalue
too
transmission
power.
the
cell
will more
easily
use
Configuration
Rule:
The
small,
the
MICH
coverage
will
Configuration
Rule:
It for
needs
thethis
power
configured
halfof
parameter
is based
on
be
so
small
that
the
UE's
to
consider
the
downlink
island mode,
it might
whether
needand
to balance
probability
ofthe
right
coverage
and
system
affect
quality
ofreceive
MBMS
power,the
and
purpose
of will
be
small
when
the
UE
in
the
capacity.
services.
power balancing.
edge of the Suggestion:
cell.
Adjustment
The
Adjustment
Suggestion:
If
the parameter
is
parameter
value value
is
configured
"None"
indicates
there
is too
no
large,
it
will
increase
the
to
make
sure thethe
UEDL
in cell
need
to balance
interference
edge
the AICH rightly
power.receiveunnecessary,
waste
the
downlink
and
avoid
generating
"Common" indicatespower
to
and
decrease
the
downlink
unnecessary
power
waste.
balance
the DL
power
but the
capacity.
If
the parameter
value
is the
too
balanced
radio links
use
small,
the AI information
same reference
power. It can
might
be rightly
resolvecannot
the "power
drifting"
received
when
UE UE
in the
problem when the
in
edge
the cell,status.
it would
macroofdiversity
reduce the downlink
coverage.
big, it would increase the
unnecessary interference to
other common channel, and
waste the downlink power, it
would reduce the cell
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
shield
period
used inthe
uplink
parameter
indicates
outer
loop
power
control
DPCH power control
algorithm.
preamble length.
Configuration
It is value
Configuration Rule:
Rule: The
relative
to
the
parameter
of this parameter should
TimeDelay,
The value
of is
ensure
the Function:
DPDCH
power
Parameter
CoverPrd
must
biggerThis
than
suitable
at
the
beginning
of
parameter
indicates
the
PICH
the
round-trip
time,
It
means
the
DPDCH
data
transmission
that
the valuepower.
of CoverPrd
transmission.
Configuration
Rule:
It needs
must
bigger
than
double
of
If
this
parameter
is
too big,
to
consider
the
downlink
TimeDelay.
the DPDCH
transmission
is
coverage
and
If parameter
issystem
too
it will
not
begin while
the big,
DPCCH
capacity.
waste
the
time ofinSIRtarget
power
is already
a suitable
Adjustment
Suggestion:
adjustment,
and
make The
level,
it
waste
power.
parameter
value too
is configured
SIRtarget
adjust
slowly.
If
this
parameter
is
too
to
make
sure
the
UE
insmall,
cell
And
if
parameter
is
too
small,
itedge
might
begin
DPDCH
receive
the
PICH
rightly
Parameter
Function:
This
ittransmission
might be smaller
than
the
at a low
power,
and
avoid
generating
parameter
indicates
the
SRB
double
of TimeDelay,
the
and
it
might
make
the
BLER
unnecessary
poweradjustment
waste.
delay.
result
of
SIRtarget
high
inparameter
the beginning
ofis too
If
thetime
value
Configuration
Rule:
The
value
last
had not
been
DPDCH
transmission.
small,
the
paging
information
Parameter
Function:
This
of
this
parameter
should
reflected
in.
But
ZTE
RNCbe
has
configured
might
cannot
rightly
parameter
power is
ensure
the indicates
DPDCH
power
the
parameter
of
SrbDelay,
received
UE DPCH
in level
the it
offset
fortowhen
downlink
change
a
suitable
can
run
power
control
towhen
edge
of
the
cell,
it
might
initial
power
calculation
before
sending
RB0-RB4
several
RFs
before
make
UE read
PCHto
RAB
hard
handover.
message.
And
itthe
needs
transmitting
signaling,
that
Parameter
Function:
This
channel
by
mistake,
Configuration
Rule:
Itand
needs
consider
the radio
time delay
ofit
improve
the
link
quality
parameter
indicates
power
would
reduce
the
downlink
to
consider
the
rate
of
RAB
RB0-RB4
message.
and
increase
the
successful
offset
forhard
downlink
coverage.
success
handover
and
If
this
parameter
is DPCH
too small,
receive
rate
of
signaling.
initial
power
calculation
If
the
parameter
value
iswhen
too
system
capacity.
itOne
might
begin
to
send
RB0of
DpcchPcpLen
and
RAB
re-establishment.
big,
it
would
increase
the
If
thismessage
parameter
too big,
RB4
at is
a low
power,
SrbDelay
go into
effect
is OK.
Configuration
Rule:
It needs
unnecessary
interference
to
the
initial
power
when
RAB
and
it
might
make
message
Parameter
Function:
This
to
consider
the
rate
of
other
common
channel,
and
hard
handover
would
be
too
be
decode indicates
mistakenly.
parameter
power
success
re- ishigh
waste
theRAB
downlink
power,
big,
it could
have
rate
If
this
parameter
too
big, itof
offset
for
downlink
DPCH
establishment
and
system
woulddelay
reduce
the
cell
RAB
success
hard
handover,
time
of
RB0-RB4
Parameter
This
initial
powerFunction:
calculation
when
capacity.
but
it would
reduce
the
message
would
be big.
parameter
indicates
power
RAB
or
SRB
setup.
If
this
parameter
is
too
big,
system
offset
forcapacity.
downlink
DPCH
Configuration
Rule:
It needs
the
initial
power
when
RAB
If
this
parameter
is too
small,
initial
power
calculation
when
to
consider
the
rate
of RAB
re-establishment
would
be
the
initial
power
when
soft
or
softer
handover.
success
RAB
or
SRB
setup
Parameter
Function:
This
too
big,
it couldwould
have high
hard
handover
be
too
Configuration
Rule:
needs
and
system
capacity.
parameter
indicates
rate
of itsuccess
RABItpower
resmall,
would
reduce
the
to
consider
the but
rate
ofwould
new
If
this
parameter
is DPCH
big,
offset
for
downlink
establishment,
ittoo
rate
oflink
RAB
success
hard
radio
downlink
successful
the
initial
power
when
RAB
or
initial
power
calculation
when
reduce
the
system
capacity.
handover.
synchronization
when
soft
or
SRB
setup
would
be
too
big,
handover.
This
If thishard
parameter
is too
small,
softer
handover,
and
itRAB
also
itParameter
could
have
high
rateThis
of
parameter
also
iswhen
used
to
the
initial
power
Function:
needs
to RAB
consider
system
success
or
SRB
setup,
calculate
F-DPCH
initial
re-establishment
would
parameter
indicates the be
capacity.
but
it
would
reduce
the
power
when
F-DPCH
too
small,
it
would
reduce
the
transmission
power
ofhard
the
If
theofparameter
is too
big,
system
capacity.
handover.
rate
success
RAB
rePCH
mapped
onwhen
the soft or
the
initial
power
If
this
parameter
is too
small,
Configuration
Rule:
It needs
establishment.
SCCPCH.
softer
handover
would
be
too
the
initial
power
when
RAB
or
to consider theRule:
rate It
ofneeds
SRB
Configuration
big,
itsetup
would
makehard
high
rate
SRB
would
be
too
F-DPCH
success
to
consider
the downlink
of
newitradio
downlink
small,
would
reduce
the
handover
andlink
system
coverage
and
system
successful
synchronization,
rate
of
success
RAB
or
SRB
capacity.
Parameter
Function:
This
capacity.
but
it also
make
the
power
setup.
If
this
parameter
is
too
big,
parameter
indicates
the
Adjustment
Suggestion:
The
waste
andpower
reduce
the
cell
the
initial
when
SRB
transmission
power
level
of or
PCH
power
should
ensure
capacity.
F-DPCH
hard
handover
the
Primary
CPICH
(Common
the
UE
in
cell
edge
receive
If
theChannel).
parameter
small,
would
be too
big,isit too
could
Pilot
the
paging
information
rightly
the
initial
power
when
soft
have
high rate
of SRB
Configuration
Rule:
Theor F-or
and
avoid
generating
softer
handover
would
be too
DPCH
success
hard
parameter
value
is configured
unnecessary
power
waste.
small,
it
would
make
low
rate
handover,
butrequirement
it would
reduce
to
satisfy
the
of
If
the
parameter
value
is too
of
new
radio
link
downlink
the system
capacity.
probability
of
rightinformation
receive,
small,
the
paging
successful
synchronization.
If
this parameter
is too small,
coverage
and
system
might
cannot
be
rightly
the
initial
power
when
SRB or
capacity.
received when UE in the
F-DPCH
hard
handover
Adjustment
Suggestion:
edge of the cell, it would
would
be
small,
it would
If
the parameter
value
is too
reduce
thetoo
downlink
reduce
the
rate
of
SRB
or Fsmall,
the
PCPICH
coverage
coverage.
DPCH
success
hard
would
be
so small
that is
the
If
the parameter
value
too
handover.
UE's
of right
big, itprobability
would increase
the
receiving
would
be bad when
unnecessary
interference
to
UE
is common
in the edge
of the cell.
other
channel,
and
If
the parameter
value
is tooit
waste
the downlink
power,
large,
it
would
increase
would reduce the cell the
unnecessary
interference,
capacity.
and waste the downlink
power and decrease the
downlink capacity.
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
to consider the system

demand on the timeliness of
accessing system and cell
capacity.
The
receiveThis
power
Parameter
Function:
of
single
antenna
receiver
should
be allowed
twice as UL
the
maximum
receive
power
of
dual
transmission power of RACH.
antenna receiver.
Configuration
Rule: It needs
Adjustment
Suggestion:
to consider the
uplink PRACH
If
the parameter
value is too
coverage
and interference
to
big,
the
initial
PRACH
Parameter
Function:
PSCH
the neighboring cell. The
power
transmission
power.
parameter should
bemight
set be
too
big,
it
would
generate
Configuration
Rule:
The
according to the coverage of
unnecessary
power
waste
paramter
is that
configured
the
cell tovalue
ensure
the UE
and
affect
therequirement
cellcan
capacity,
based
on the
at the
cell
border
be on
but
the access
process
would
coverage
and capacity
acknowledged
by
Nodeof
B and
be
short.
system.
reduce the interference to the
If
the parameter
value
too
Adjustment
Suggestion:
neighboring
cellparameter
at
the is
same
Function:
This
small,
the
initial
PRACH
If
the
parameter
value
is
time.
indicates
the nominal bit too
rate
transmission
power
would
small,
the
PSCH
coverage
Bigger
this
parameter
is, be
for interactive/background
more
but
it would
Parameter
Function:
This
will
bereasonable,
so
small
that
the
UE
bigger
the
uplink
PRACH
services
on
E-DCH
have
more
preambles
for it
parameter
indicates
the
cannot
seach
cell
when
coverage
is. the
Related
Factor:
BP
related
ramp,
itofwould
make
power
offset
between
the
is
in the
edgeparameter
the
Smaller
this
is,
data
throughput,
usercell.
Function:
This
parameter
the
access
process
longer.
DPCH
maximum
downlink
If
the
parameter
value
is too
smaller
the
uplink
PRACH
experience
indicates
the
nominal
bit rate
power
the
traffic
class
of
large,
itfor
will
incease
the
coverage
is.
If
the
parameter
value
related
for
different
basic
priority.
interference
unnecessary,
Parameter
Function:
This
to
BP is larger,
BP related
services
HS-DSCH
Configuration
Rule:
Itthe
needs
waste
theondownlink
parameter
indicates
data throughput
andpower
the
user
Related
Factor:
BP
related
to
consider
the
system
and
decrease
the
downlink
power
offsetwill
between
the
experience
beuser
improved.
data
throughput,
capacity
and service
quality.
capacity.
DPCH
maximum
uplink
If
the parameter
value
related
experience
If
this
parameter
is
too
big,of
power
for
the
traffic
class
to
BP
is
smaller,
BP
related
If
the
parameter
value
related
the
actual
maximum
downlink
different
basic priority.
data
and
the user
to
BPthroughput
iswould
larger,
BP
related
power
be
tooaffected.
big,
and it
Configuration
Rule:
It
needs
experience
will
be
data throughput
and the
user
might
affectthe
thesystem
system
to
consider
experience
will be improved.
capacity.
capacity
and service
quality.
If
the
parameter
value
related
If
this
parameter
is
too
small,
If
this
parameter
is
too
big,
Parameter
Function:
Dynamic
to
BP
is
smaller,
BP
related
the
actual
maximum
downlink
the
actual
maximum
uplink
Update
PO2 Switch.
data
throughput
andsmall,
the user
power
would
be
too
power
wouldwill
be
tooaffected.
big,
and it
Configuration
Rule:
It
experience
be
and it affect
might the
affect
the needs
service
might
system
to
consider
the
system
quality.
capacity.
capacity
andSuggestion:
the bandwidth of
Adjustment
If
this
parameter
is too small,
Iub
interface.
The
parameter
valueuplink
is
the
actual
maximum
Turn
on thisbased
switch,
system
configured
on
the
power
would
be optimized,
too small,
capacity
can be
system
demand
onthe
whether
and
it
might
affect
service
but
it
needs
to
add
a This
Parameter
Function:
Parameter
Function:
The
different
basic
priority
users
quality.
additional
Iub
control
FP
parameter
indicates
the
switch
for R99
CS AMR
need
have
different
maximum
Adjustment
Suggestion:
(RADIO
INTERFACE
maximum
transmission
power
services
BLER
target
downlink
power.
If
there
is no
The
parameter
value
is
PARAMETER
UPDATE).
of
the
FACH
which
is
mapped
adjustment
function.
need
to
configure
different
configured
based
onDPCH
the
Turn
this
switch,
on
theonSCCPCH.
Configuration
Rule:
It needs
maximum
downlink
power
system
demand
on
whether
TPC
domain
might
waste
Configuration
It needs
to
consider
theRule:
service
quality
based
onbasic
different
basic
different
priority
users
power,
but
itparameter
doesn't
need
to
consider
the
coverage
ofto
and
system
capacity.
priority,
the
can
be
need
have
different
maximum
add
a
additional
Iub
control
FACH
and
system
capacity.
Turn
on
this
function
can
configured
with
the
value
0.
uplink
power.
If there is no
FP
(RADIO
INTERFACE
Adjustment
Suggestion:
increase
theFunction:
cell capacity,
Parameter
This but
need
to
configure
different
PARAMETER
UPDATE).
The
parameter
value
is
reduce
the
service
quality,
parameter
indicates
the
maximum
uplink
power
based
Adjustment
Suggestion:
configured
to
make
sure
the
and
it
is
suitable
for
the
high
power
offsetbasic
of thepriority,
SCCPCH
on
different
the
This
function
can
be
turned
UE
in
cell
edge
receive
the
load
scene.
TFCI domain
relative
to the
parameter
can
be
configured
on
when
the
capacity
of
the
FACH
the
biggestthe
data
Turn
offwith
this
function,
data
domain.
with
the
value
0.avoid
cell
isrightly
limited
by
downlink
rate
and
service
quality
will
not
be
Configuration
Rule:
The
power.
generating
unnecessary
reduced, and
it is suitable
for
paramter
value
configured
power
waste.
the medium
low load on
based
on theand
requirement
If
the parameter
value isoftoo
scene.
coverage
and capacity
small,
the
FACH
channel
system.
coverage
will be value
so small
that
If
the parameter
is too
the
UE's
small,
thereceiving
SCCPCHquality
TFCI will
be
bad when
is inbethe
domain
powerit will
soedge
small
of
the
cell.
that the UE's probability of
If
thereceive
parameter
value
too
right
will be
badiswhen
large,
it
will
increase
the
it is in the edge of the cell.
interference
unnecessary,
If
the parameter
value is too
waste
large, itthe
willdownlink
incease power
the
and
decreaseunnecessary,
the downlink
interference
capacity.
waste the downlink power
and decrease the downlink
capacity.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
power offset of the SCCPCH

pilot domain relative to the
data domain.
paramter value is configured
based on the requirement on
coverage
capacity
of
Parameterand
Function:
This
system. indicates the
parameter
If
the parameter
value power.
is too
SCPICH
transmission
small,
the
SCCPCH
Pilot
domain
power
willisbe
so small
Parameter
Function:
S-SCH
of this parameter
based
on
that
the
UE's
probability
transmission
power.
the requirement of MIMOofcell
right
receive
be bad
Configuration
Rule:
The when
coverage
andwill
system
it is in the value
edge is
of configured
the cell.
paramter
capacity.
If
thebigger
parameter
value is too
based
on the
requirement
on
The
this
parameter
is,
large,
it
will
incease
the
coverage
capacity
the biggerand
coverage,
butoftoo
Function:
This
parameter
interference
system.
bigger S-CPICH
power of
will
indicates
theunnecessary,
threshold
waste
the
downlink
power
Adjustment
Suggestion:
generate
unnecessary
HARQ
failure
indication
and
thevalue
downlink
If
thedecrease
parameter
interference,
and
reduce
the
number
to increase
SIRis too
capacity.
small,
the
SSCH
coverage
system
capacity.
target when E-TTI=10ms.
will
be
soFactor:
small
that
the UE is,
The
smaller
this
parameter
Related
service
Function:
This
parameter
Parameter
Function:
cannot
seach
the
cellThis
when it
the
smaller
coverage.
quality,
system
capacity.
indicates
the
threshold
of
parameter
indicates
AMR
is
in the
edge
of the
cell.
If
the
parameter
value
is
HARQ
failure
indication
services
tolerance
BLER
If
the parameter
value
is too
larger,
it to
is
more
difficult
number
increase
SIR
Parameter
Function:
Thistofor
period
in
high
load
status
large,
it
will
incease
the
increase
the
target
when
E-TTI=2ms.
parameter
indicates
R99
CS
AMR
BLER the
target
interference
unnecessary,
it will
Related
Factor:
service
transport
channel
BLER
adjustment.
waste
the
downlink
power
improve
the
system
capacity
quality,
system
capacity.
quality
target for
CSvalue
Configuration
Rule:
The
and
decrease
theR99
downlink
but
affect
the service
quality.
If
the
parameter
value
is is in
AMR
services
when
cell
of
this
parameter
should
capacity.
If
theload
parameter
value
isto
larger,
it
is
more
difficult
high
status
for
R99
CS
make
theit service
BLER
in
smaller,
is
more
easier
to
increase
the
AMR
BLER
target
high
loadthe
condition
higher
increase
SIRtarget.
it will
adjustment.
then
that in the
lower
load
Accordingly,
it Rule:
will
improve
the
improve the
system
capacity
Configuration
The
value
condition,
in
this
way,
the
cell
service
quality
but
affect
the
but
affect
the
service
quality.
of
this parameter
should
capacity
can be increased.
system
capacity.
If
theinparameter
isin
make
the
BLERthe
And
theservice
same value
time,
smaller,
it
is
more
easier
high
load
condition
higher
minimum requirement of to
the
increase
the
SIRtarget.
then
thatquality
in the
lower load
service
should
be
Function:
parameter
Accordingly,
it will
improve
the
condition,
in this
way,
the cell
satisfied. This
indicates
the
threshold
ofthe
service
quality
capacity
can bebut
increased.
If this parameter
isaffect
too small,
sample
number
totime,
decrease
system
capacity.
And
in the
it would
besame
too easy
forthe
uplink
SIR
target
when
E-TTI=2ms.
minimum
requirement
of the
AMR service to decrease
the
Related
Factor:
service
service
quality
should
beload
SIR
target
in
uplink
high
Function:
This parameter
quality,
system
capacity.
satisfied.
status,
and
it would
affect the
indicates
R99
CSvalue
AMR
If
the
parameter
is
Bigger
this parameter
is,
AMR
service
quality.
services
error
transport
block
larger,
it
is
more
difficult
to it
bigger
BLER for downlink
If
this parameter
iswhen
too big,
number
threshold
cell
decrease
the
AMR
service.
would
be
toostatus
hard for
uplink
in
highparameter
load
itsmall,
will
If
this
is for
tooR99
AMR
service
to
decrease
the
CS
AMR
services
adjustment.
improve
the
service
quality
BLER
of
downlink
AMR
SIR
target
in
uplink
high
load
Function:
This
parameter
Related
Factor:
but
affect
the would
system
service
would
beservice
tooaffect
small
in
status,
and
indicates
theit number
of the
quality,
system
capacity.
capacity.
downlink
high
load
status,
system
capacity.
HARQ
retransmission
(NHR)
If
the
value
is
If
theit parameter
parameter
value
is
and
would
affect
the SIR
system
threshold
to
decrease
larger,
it
is
more
difficult
to
smaller,
it
is
more
easier
to
capacity.
target
when
E-TTI=2ms.
increase
the
decrease
the SIRtarget.
If
this
parameter
is
too
big,
Related
Factor:
service
Function:
This
parameter
Accordingly,
it will
improve
BLER
ofsystem
downlink
AMRit willthe
quality,
capacity.
improve
the
system
indicates
the
number
of inthe
system
capacity
but
affect
service
would bevalue
toocapacity
big
If
the
parameter
is
but
affect
the
service
quality.
HARQ
retransmission
(NHR)
service
quality.
downlink
high
load
status,
larger,
it
is
more
easier
If
theit parameter
value
isto
threshold
to increase
and
would
affect
theSIR
AMR
decrease
the
smaller,
it
is
more
easier
target
when
E-TTI=2ms. to
service
quality.
increase
the
SIRtarget.
Related Factor:
serviceit will
improve
the system
capacity
Accordingly,
it will
improve
the
quality,
system
capacity.
but
affect
the
service
quality.
service
quality but
affect
If
the parameter
value
is the
If
the parameter
system
larger,
itcapacity.
is more value
difficultisto
smaller,
it
is
more
difficult to
increase the
decrease
the
SIRtarget.
SIRtarget.Accordingly, it will
Accordingly,
it will improve
the
improve
the system
capacity
service
quality
but affect
the
but affect
the service
quality.
system
capacity.value is
If the parameter
smaller, it is more easier to
increase the SIRtarget.
Accordingly, it will improve the
service quality but affect the
system capacity.
Fixed
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A

indicates the threshold of
sample number to increase
SIR target when E-TTI=2ms.
quality,
system
capacity.
Parameter
Function:
Switch
If
the
parameter
value is
of Closing Frequency
larger, it is more
difficult to
Intelligently
Function.
increase
the Rule: This
Configuration
parameter is configuredit will
improve
capacity
based onthe
thesystem
requirement
on
but
affect
the
service
quality.
the power saving.
If
the the
parameter
value
Only
following
cellsismight
smaller,
it is
easier toin
need
turn
onmore
this function
increase
the SIRtarget.
order
to save
power: This
the cells
Parameter
Function:
Accordingly,
it will improve
the
have
inter-frequency
cell with
parameter
is a but
configuration
service
quality
affect
the
same
coverage,
or theacells
Index
which
indicates
set of
Parameter
Function:
This
system
capacity.
whose
coverage
is in
the
diversity mode
and
service
parameter
indicates
the
end
coverage
of itscontrol
interrelated
power
time
of
the
switching
off
frequency
cells.
And in
order
parameters.
Parameter
Function:
This
frequency
period.
to
keep
the
coverage,
the
first
Configuration
Rule:
It
must
parameter
indicates
the
Configuration
Rule:
It's
atime
frequency
cell
can
not
turn
meet
thefor
restriction
interval
switchingbetween
off theon
network
planing&optimization
this
function.
DivPcIndex
of we
utranCell
and
frequency
after
parameter,again
so
can change
DivPcIndex
of
DivPc.
switching
on
it.
the
value
according
to
the
Configuration
Rule:
needs
actual
condition.
TheItthe
parameter
indicates
to
avoidtime
the
frequency
be off
frequency
can
be switched
trigger
of
judgment
opened
and
closed
during on
the
time
when the
based
UE
number
during
frequently.
And
itswitching
needs
toon
throughput
oforthe
cellThis
always
switching
off
Parameter
Function:
consider
the
requirement
of
is
small. intelligently.
frequency
parameter
indicates the
power
saving.
If
the
value
of
Configuration
This on
algorithm
usedRule:
toisswitch
If
the parameter
CloseFreFunSwit
istoo
"0",small,
this
parameter
is configured
to
the
frequency
intelligently.
the
frequency
mightthat
be
parameter
is
invalid.
avoid
the
condition
Configuration
Rule:
It's
a
opened
and
closed of the UE
unmeant
reduction
network
planing&optimization
frequently.
number
would
trigger
parameter,
it needs
tothe
If
the parameter
isoff.
too
big,it
frequency
switch
And
consider
the actual
need.
the
frequency
could
not
be
needs
to consider
the
The
value
"0"long
onlytime
consider
closed
for
a
after
it
requirement
of switch
power on
saving.
the
time,
it will
was
opened,
and
it couldthe
not
The
bigger
this
parameter
is,
switched
frequencyofon
meet
the off
requirement
the
more
difficult to trigger
time.
Parameter
Function:
power
saving.
frequency
off, This
and
The
vlaue switch
"1"
means
it will
parameter
indicates
SIB7
waste
the
power.
switch
on
the
switched
off
originator
is RNC
NodeB.
But
if the value
of or
this
frequency
onlyRule:
when
the
Configuration
It
needs
parameter
is
small,
the
working
istoo
congestion.
Parameter
Function:
This
to
ensurecell
the
RTWP
be
unmeant
reduction
of
the
UE
The
value
"2"
consider
parameter
indicates
thethe
start
update
inwould
time
and exactly.
number
trigger
the
or
Whether
the is
working
time
of
the
switching
offbased
RNC
originate
SIB7
frequency
switch
off.
cell
is
congestion.
If
one
of
frequency
period.
on the common
the condition isRule:
satisfied,
Configuration
It's a
measurement
reported
bythe
switched
offitfrequency
should
network
Node
B, planing&optimization
so
is not inThis
time
Parameter
Function:
be
switched
on.
parameter,
so we can change
and
exactly.indicates
parameter
thethe
UE
If
the
value
of RTWP
the
value
according
to
NodeB
update
is more
number
threshold
of
CloseFreFunSwit
is "0", the
actual
The
in
timecondition.
and
exactly
switching
off
frequency
Parameter
Function:
This off
OpenFreAlg
is
invalid.
frequency
can
be
switched
intelligently
multi-carrier
parameter
iswhen
a configuration
during the time
when
the
is
used.
index
whichofindicates
a set of
throughput
the cell always
Configuration
Rule:
It
needs
service
related
power
control
is small.
to
satisfy
theofrequirement of
parameters.
If the
value
power
saving and
service
Configuration
Rule:
It"0",
must
CloseFreFunSwit
is
this
quality.
meet
the
restriction
parameter is invalid.between
If
this parameter
is too small,
TrfPcIndex
of utranCell
and
itTrfPcIndex
would be hard
to switch off
of TrfPc.
the frequency, and it could
not satisfy the requirement of
power saving.
would be easy to switch off
the frequency, and it would
increase the load of other
frequency with same
coverage obviously, and it
would affect the service
quality.
If the value of
CloseFreFunSwit is "0", the
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
DCH in enhanced uplink

CELL_FACH state in the cell.
to consider the maximum
Parameter
Function: This
enhanced uplink
parameter
indicates
whether
CELL_FACH user number
the
IE
"UL
interference
for
Parameter
Function:
This
that NodeB can support
in
common
E-DCH"
is
parameter
indicates
whether
one cell.
configured
in the
SIB5/5bis.
the
Theuplink
largerEnhanced
of
value, the
Configuration
It needs
CELL_FACH
isRule:
open.
more of enhanced
uplink
to
consider
whether
UL
Configuration
Rule: can
Itthe
is admit
CELL_FACH users
interference
can
be
updated
depend
on
the
operator's
in the cell.
in
time.
requirement.
The
less of the value, the less
If
this
parameter
gets
If
this
parameter
gets the
the
of enhanced
uplink
value
0,
"UL
interference
forof
value
0, the uplink
services
CELL_FACH
users
can
admit
Parameter
Function:
This
common
E-DCH"
is
not
in
the
users
CELL_FACH
in
the
cell;on
parameter
indicates
the
SIB5/5bis,
UEoncalculated
status
mustand
bear
RACH.It's
Configuration
Suggestion:
power
offset
between
the last
the
preamble
initial
power
is
If
this
parameter
gets
the
set
to
the
maximum
transmitted
preamble
and
the
based
on
the
UL
interference
value
1,
the
uplink
services
of
enhanced
uplink
initial
power
of
the
DPCCH
read
from
SIB7.
The
the
users
on
CELL_FACH
CELL_FACH
user
number
transmission
in
the
Enhanced
frequency
SIB7
bein
Parameter
Function:
This
status
mayof
bear
oncan
common
that
NodeB
can
support
Uplink
in
CELL_FACH
state.
high,
so
the
UL
interference
parameter
indicates
the
E-DCH,
will support
one
cell.and it Rule:
Configuration
needs
can
be data
more
exact. ItThis
additional
E-DCH
higher
rate.
Parameter
Function:
to
consider
the
demodulation
If
this parameter
the
transmission
backgets
offthe
in
parameter
indicates
quality
and
the
consumed
value
1,
"UL
interference
for
uplink
enhanced
number
of common E-DCH
uplink
power.
common
E-DCH"
is
in
CELL_FACH
state.
resources
uplink enhanced
Bigger
thisin
parameter
is,
SIB5/5bis,
and
UE calculated
Configuration
Rule:
Time
CELL_FACH
state.
bigger
initial
power
of
DPCCH
the
preamble
initial
power
is
delay
and
demodulation
Configuration
Rule: It needs
in
enhanced
CELL_FACH
based
on
the
UL
interference
quality.
to
consider
the
number of
status,
andSIB5/5bis.
higher
read
from
Usually,
Bigger
this
parameter
is,
common
E-DCH
users
can
demodulation
quality.
the
information
of
SIB5/5bis
more
delay
to
transmit
data in
transmit
data
at
same
time
Parameter
This
Smaller
this
is
larger,
soFunction:
itparameter
can notbut
beis,more
CELL_FACH
status,
and
the initial
resource
parameter
indicates
the
smaller
power
of
updated
with
too
high
possible to use a suitable
consumption.
maximum
common
E-DCH
DPCCH
intransmit
enhanced
frequency,
and
ULdata,
power
to
Bigger
this
parameter
is,and
resource
allocation
time.
CELL_FACH
status,
and
interference
can
not
be
higher
demodulation
quality.
more
common
E-DCH
users
Configuration
Rule:
This
lower
demodulation
quality.
updated
in time.
Smaller
this
parameter
is,
can
transmit
data
at
same
parameter
should
ensure
less
delay
to
transmit
data
in
time,
but
more system
there
is enough
time but
to less
CELL_FACH
status,
resourceRRC
be used.
transmit
message
to
possible
to Function:
use
a suitable
Smaller
this
parameter
is,
Parameter
This
UTRAN
after
UE
was
power
to transmit
data,
and
less
common
E-DCH
users
parameter
indicates
the
admitted
and
assign
common
lower
demodulation
quality.
can
transmit
datatransmission
same
common
E-DCH
E-DCH
resource.
Itatmainly
time,
but
less
system
continuation
back
off.
depend on the delay of UE.
resource
be used.
Configuration
Rule:
It needs
If this parameter
is too
big,
Parameter
This the
Configuration
Suggestion:
1
to
the
efficiency
UEconsider
transmitFunction:
data
on CCCH
parameter
indicates
the
F-DPCH
can
support
10
resource
bethe
used
and thelong
will occupy
resource
maximum
for collision
common
users,
so
time
for
time,delay
andE-DCH
itperiod
willtransmition.
waste
resolution
phase
for
common
usually
the
common
E-DCH
Bigger
this
parameter
is,
resource.
E-DCH.
resources
is the the
multiple
of
lower
resource
If this efficiency
parameter
is too
small,
Configuration
Rule:
Itdelay
needsfor
10.used,
be
but
smaller
Parameter
Function:
This
there
would
be
not enough
to
ensure
there
is
enough
transmition.
parameter
indicates
which
time
to transmit
RRC
Parameter
Function:
This
time
for
collision
be
resolved
Smaller
this
parameter
is,
uplink
inner
loop
power
message.
parameter
indicates
the
TPC
and
using
the resource
with
higher
efficiency
the
resource
control
algorithm
is
used
in
step
size
for
uplink
inner
loop
minimum
time.
be
used,
but
bigger
delay for
uplink
enhanced
power
control
in
uplink
Bigger
this parameter
transmition.
CELL_FACH
state. is,state.
enhanced
CELL_FACH
more
possibility
for collision
Configuration
Rule:
Radio
Configuration
Rule:
service
be
resolved
in
collision
condition.
quality,
system
capacity.
resolution
phase
when
For
algorithm
1 inner
loop
If
this
parameter
is 1dB,
the
enhanced
CELL_FACH
users
power
control
is
done
every
transmit
power
will
be
adjust
is apply
for
E-DCH
time
slot,
socommon
it can
more
smoothly.
Theresponse
power
resource.
to
radio
condition
change
will be decreased too slowly
rapidly.
to waste the power resource
For
algorithm
2 innercapacity
loop
affecting
the system
power
control
is
done
and the power will be every 5
tim slots, ittoo
is suit
for to
radio
increased
slowly
affect
condition
change
the service
quality.smoothly.
And if this parameter is 2dB,
the transmit power will be
adjust more rapidly. The
power will be decreased too
lower to affect the service
quality and the power will be
increased too higher to waste
the power resource affecting
the system capacity.
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A

parameter is used for
deciding the delay of
transmitting 'happy bit' by UE.
Configuration Rule: Delay of
service and uplink power
overhead brought by sending
happy bit.
The larger the parameter, the
higher the service
delay
Parameter
Function:
Thisand
the less uplink
powerthe
brought
parameter
indicates
by sendingHS-PDSCH
happy bit. power
assumed
The smaller
offset
relative
to parameter,
P-CPICH/SPrimary
key the
can
not be
the
smaller
theused
service
CPICH
power
for delay
CQI
modified.
and
the
more
uplink
power
measurement
in uplink
Parameter
Function:
This
brought
byCELL_FACH
sending happy
bit.
enhanced
parameter
indicates
the state.
Configuration
Rule:
It
needs
maximum bit rate of the
to
consider
the service
common
E-DCH
user inquality
and
the
system
capacity.
uplink enhanced
If
this parameter
is configured
CELL_FACH
state.
too big, the service
Configuration
Rule: in
It needs
enhanced
CELL_FACH
state
Parameter
Function:
to
consider
the
service
quality
This
might
get
big
CQI,
and
get
parameter
indicates
the
SIRbig
and
the system
capacity.
parameter
indicates
whether
Parameter
Function:
This
power,
but
it
will
reduce
the
target
of
the
common
E-DCH
Bigger
this indicates
parameter
is, FACK/NACK
and CQIInitial
are
parameter
cell
capacity.
in
uplink
enhanced
bigger
maximun
data
rate
of
supported
on
HS-DPCCH
in
DPCH
power state.
in uplink
If
this
parameter
is configured
CELL_FACH
UE
in
enhanced
CELL_FACH
uplink
enhanced
enhanced
CELL_FACH
state.
too
small,
might
not
satisfy
Configuration
Rule:
It needs
state,
and itsamller
system
CELL_FACH
state.
The
largest
value
is
a
valid
the
requirment
of
CQI.
to
consider theRule:
service
quality
capacity.
Configuration
It needs
value,
used to capacity.
indicate
that
and
theit system
Smaller
this
parameter
is,
to
consider
the
HS-DPCCH
the
RNC
not
need
to
Bigger
this
parameter
samller
maximun
data
rate of
information
in PHYSICAL
Iub
and is,
Uu
Function:
This
parameter
configure
it in
higher
power
of
the
UE 1in
UE
in
enhanced
CELL_FACH
interface
and
NodeB
indicates
the
threshold
SHARED
CHANNEL
CELL_FACH
state,
it will E, F
state,
andtriggering
bigger
system
scheduling.
used
for
event
RECONFIGURATION
waste
power.
capacity.
"0: SIR
Not Supported"
for
Errorand
measurement.
REQUEST,
themeans
power of
Smaller
this and
parameter
ACK/NACK
CQIbyareis,not
Configuration
Rule:
F-DPCH
is
decided
lower
power
ofHS-DPCCH
the UEit in
supported
onwhether
Considering
canin
NodeB.
CELL_FACH
state,
itreflects
might
uplink
enhanced
correctly
and
timely
Configuration
Rule:
It needs
not
satisfy
thewhen
Qos need.
CELL_FACH
state,
it reduce
the
condition
SIR
Function:
This
parameter
to consider
the
system
the
HS-DPCCH
information
cannot
converge
to the
indicates
the service
power
offset
ofin
capacity
and
quality.
Iub DPCH
andthis
Uu.
SIRtarget
because
ofDL
the
maximum
Bigger
parameter
is,
"1:
Supported"
means
deterioration
of
radio
power,
whichpower
defines
bigger
initial
of which
FACK/NACK
and
CQItrigger
are
condition.
threshold
shall
DPCH for that
common
E-DCH
supported
The
less
theHS-DPCCH
absolute
event
A, Bofon
for
transmitted
transmission,
and
too big in
uplink
enhanced
value
of
the
parameter,
the
carrier
power
measurement.
initial power will affect the
This
parameter
indicates
theF
CELL_FACH
state,
NodeB
more
easier
for
event
E
Configuration
Rule:
system capacity. But theand
downlink
rate
level
threshold,
schedule
HS-PDSCH
power
of
SIRerror
tothe
report.
But
if of
it
Considering
timeliness
biggest
value
15.1dB
means
In
D-TCP
based
PS
DRBC,
based
on
ACK/NACK
and is
is too
small,
it which
willof
influence
the
A/B
event
triggers
initial
power
F-DPCH
the
thresholds
D-TCP
CQI
will
be OLPC
more
accurately.
the
normal
soand
asThe
to
TCP
measurement,
determined
by of
NodeB.
measurement
event
A/B
are
influence
service
quality
avoiding
the of
ping-pong
the
initial power
F-DPCHofor
based
on
the
rate
level
of
system
capability
finally.
A/B
event
in
order
to
satisfy
determined by NodeB will the
be
service.
The
threshold
of the
The
more
of the
absolute
the
requirement
of
the service
more
accurately.
TCP
measurement
event
value
ofand
thesystem
parameter,
the
quality
capability.
Smaller
this
parameter
is,
relative
to
the
maximum
more
harder
for
event
and
When
the
parameter
used
smaller
initial
power
ofisEFtransmit
power
F
ofthe
SIRerror
tocorresponding
report.
But if
for
threshold
of A
event,
DPCH
for
common
E-DCH
to
rate
level
have
itthe
isthe
toosame
large,
it will
influence
more
of the
parameter,
transmission,
and
too
small
the
same
value.
This
SIR
convergence
speed
the
harder
for
A
event
initial power will affect to
thebe
parameter
decides
the
when
radio
condition
recovers
triggered,
the
more
harder
service
quality.
Parameter
Function:
This to
downlink
rate
level.
SIR
has
converges
to
trigger
service
rate
parameter indicates whether
SIRerror
so asToo
tocell
influence
downgrading.
large
of the
the neighboring
supports
service
quality
or
system
parameter
will
guarantee
E-DPCCH power boosting or
capability
finally.
good service
quality but
not.
system
capability
willThe
be
Configuration Rule:
influenced.
When theto
parameter
is used
according
the capability
of
for
the
threshold
of
B
event,
the neighbouring cell of the
the
less ofRNC.
the parameter, the
adjacent
harder for B event to be
triggered, the harder to trigger
service rate upgrading. Too
small of the parameter will
influence system capability
because it is difficult to be
upgraded after the service
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
according to the load

condition of the cell.
When
this parameter
is "1:
Parameter
Function: This
High
Load
Cell",
the
configuration
of the cell
load
power offset relative
to 2ms
based
parameters
is
for
increasing
the2ms
service
quality
condition for
TTI E-HICH
to increase
the system
of
serving
E-DCH
RLS
in
Parameter
Function: This
capacity.
macro
diversity
condition.
parameter
indicates the
When
this parameter
is "0:
Configuration
Rule: This
power
offset
relative
to 10ms
Normal
Load
Cell",
the
parameter
ensure
the
TTI
E-HICHshould
inofsingle
linkload
configuration
the
cell
power
of
serving
E-DCH
RLS
condition
for 10ms is
TTI E-to
based
parameters
E-HICH
(for
2msE-DCH
TTI)suit
large
HICH
of
serving
Parameter
Function:
ThisRLS
normal load
case,the
in that
enough
todiversity
satisfy
in
macro
condition.
parameter
indicates
case,
service
quality the
isfor
better
minimum
requirement
EConfiguration
Rule:
This
power
offset
relative
to
2ms
then
that
in
the
case
this
cell
HICH
(MISS
ACK
equal
or
parameter
should
ensure
the
TTI
E-HICH
single
link
load
scene
"1:
High
Load
below
5%
inisin
3GPP
25.101
power
of
serving
E-DCH
RLS
condition
for
2ms
TTIneeds
E-HICH
Cell"
protocol).
And
it also
to
E-HICH
(for
10ms
TTI)
large
Parameter
Function:
This
of
non-serving
E-DCH
RLS
If
the
cell
always
in
high
loadin
consider
the
system
capacity.
enough
to
satisfy
the
parameter
indicates
the
macro
diversity
condition.
condition,
set
this
If
this parameter
isparameter
too
small,
minimum
requirement
Epower
offset
relative
tofor
10ms
Configuration
Rule:
This
with
the
value
"1:
High
Load
the
minimum
requirement
for
HICH
(MISS
ACK
equal
or
TTI
E-HICH
in
single
link
parameter
should
ensure
Cell",
else
the
value
ofcould
thisthe
E-HICH
performance
below
5%
in
3GPP
25.101
condition
for
10msbe
TTI
Epower
of
non-serving
E-DCH
parameter
should
"0:
not
beof
satisfied.
protocol).
And
it
also
needs
to
HICH
non-serving
E-DCH
RLS
2ms
TTI)
Normal
Load (for
Cell".
If
thisE-HICH
parameter
is
too
big, it
Parameter
This
consider
theFunction:
system
capacity.
RLS
in
macro
diversity
large
enough
to
satisfy
the
would
waste
the power,
and
parameter
indicates
the
If
this parameter
is too
small,
condition.
minimum
requirement
for
Eaffect
the
system
capacity.
power
offset
relative
to
2ms
the
minimum
requirement
Configuration
Rule:
This orfor
HICH (MISS ACK
equal
TTI
E-RGCH
in single
linkthe
E-HICH
performance
could
parameter
should
ensure
below
5%
in
3GPP
25.101
condition
for
2ms
TTI
Enot
be
satisfied.
power
of
non-serving
E-DCH
protocol). And it also needs to
RGCH
ofthe
serving
E-DCH
RLS
If
thisE-HICH
parameter
too
big,
it
RLS
(for is
10ms
TTI)
Parameter
Function:
This
consider
system
capacity.
in
macro
diversity
condition.
would
waste
the
power,
and
large
to satisfy
the
parameter
indicates
thesmall,
If
this enough
parameter
is too
Configuration
Rule:
This
affect
the
system
capacity.
minimum
requirement
Epower
offset
relative
tofor
10ms
the minimum
requirement
for
parameter
should
ensure
HICH
(MISS
ACK
equal
orthe
TTI
E-RGCH
in single
link
E-HICH
performance
could
power
of
serving
E-DCH
below
in 3GPP
25.101
condition
for
10ms
TTI
E-RLS
not be 5%
satisfied.
E-RGCH
(for
2ms
TTI)
large
protocol).
And
it
also
needs
RGCH
of
serving
E-DCH
RLS
If this parameter
is too
big,
itto
Parameter
Function:
This
enough
to
satisfy
the
consider
the
system
capacity.
in
macro
diversity
condition.
would waste
the power,
and
parameter
indicates
the
minimum
requirement
for
EIf
this parameter
iscapacity.
too
small,
Configuration
Rule:
This
affect
the
system
power
offset
relative
to
10ms
RGCH
(MISS
UP
equal
or
the
minimum
requirement
for
parameter
should
ensure
TTI
E-RGCH
in
single
linkthe
below
5%
in 3GPP
25.101
E-HICH
performance
could
power
of
serving
E-DCH
RLS
condition
for
of nonprotocol).
AndE-RGCH
it alsoTTI)
needs
to
not
be satisfied.
E-RGCH
(for
10ms
large
serving
E-DCH
RLS
in
macro
consider
the
system
capacity.
If
this
parameter
is
too
big,
it
enough
to
satisfy
the
diversity
condition.
If
this parameter
is too for
small,
would
waste
the
power,
minimum
requirement
EConfiguration
Rule:
Thisand
the
minimum
requirement
for
affect
the
system
capacity.
RGCH
(MISS
UP
equal
or
Parameter
Function:
This
parameter
should ensure
the
E-RGCH
performance
could
below
5%non-serving
in
3GPP 25.101
parameter
indicates
whether
power
E-DCH
not
be of
satisfied.
protocol).
And
it
also
needs
HSUPA
transmission
is TTI)to
RLS
E-RGCH
(for
10ms
If
this parameter
is too
big, it
consider
the system
capacity.
adaptive.
large
enough
to satisfy
the
would
waste
the
power,
and
If
this
parameter
is
too
small,
Configuration
Rule:
It
needs
minimum
requirement
for
Parameter
Function:
This Eaffect
the
system
capacity.
the
minimum
requirement
to
consider
theDOWN
service
quality
RGCH
(MISS
equal
parameter
indicates
the
E-for
E-RGCH
performance
could
and
system
capacity.
or below
in 3GPP
25.101
DCH
user5%
number
level
used
not
beonsatisfied.
Turn
this
function
protocol).
And
it also can
needs to
for
HSUPA
adaptive
If
this parameter
is too
big,but
it
increase
the
capacity,
consider
the cell
system
capacity.
transmission.
would
waste
the
power,
and
reduce
the
service
quality
If
this
parameter
is
too
small,
affect
the system
capacity.
requirement
when
theThis
cell for
Parameter
Function:
the
minimum
requirement
to consider
the
HSUPA
load
is
high,
and
it
suitable
parameter
indicates
the
E-RGCH
performance
could
service
quality
and is
system
for
high
loaduser
scene.
default
E-DCH
number
not the
be satisfied.
capacity.
Turn
off
this this
function,
level.
If thissmaller
parameter
is toothe
big, itis,
The
parameter
service
quality
requirement
Configuration
Rule:
It needs
would
waste
power,
and
the
easier
forthe
HSUPA
service
will
notthe
besystem
reduced
when the
to
the HSUPA
affect
capacity.
to consider
use
the
OLPC
parameters
cellbigger
loadquality
isBLER
high,
and
it isand it
service
and
system
for
target,
suitable
for the
medium
and
capacity.
would affect
HSUPA
service
low
load
scene.
The
smaller this parameter is,
quality.
the
service
Theeasier
biggerfor
thisHSUPA
parameter
is,
to
use
the
OLPC
parameters
the easier for HSUPA service
for
bigger
and it
to use
the BLER
OLPCtarget,
parameters
would
affectBLER
HSUPA
service
for smaller
target,
and
quality.
it would affect system
The
bigger this parameter is,
capacity.
the easier for HSUPA service
to use the OLPC parameters
for smaller BLER target, and
it would affect system
capacity.
consider the Iub

reconfiguration.
If the switch is on, E-AGCH
Power Offset is
EagchPOTti2(2ms TTI) or
EagchPOTti10(10ms TTI) in
Parameter
DL TPC
single radioFunction:
link condition,
pattern
01 count.
and EagchPOTti2(2ms
TTI)
Configuration
Rule:
+MacroDivGain
or This
parameter
is
used to This
ensure
EagchPOTti10(10ms
TTI)
Parameter
Function:
the
TPC
command
is
"0"Pand
+MacroDivGain
in DCH
parameter
indicates
the
"1"
by
turns
before
the
uplink
macro diversity
condition.
In
CPICH
power down
step size
is
synchronized
when
first
Parameter
Function:
This
this
way,
the
HSUPA
service
used
to switch
off
frequency
radio
isindicates
setup, itcapacity
avoid
the
parameter
the times
qualitylink
and
system
intelligently.
power
adjusted
by
of
of P-CPICH
all downgrade
are be
good.
Where,
Configuration
Rule:
when the
mistake.
power
withisequal
step used
MacroDivGain
is macro
frequency
determined
to to
Parameter
The
bigger
this
switch
off
frequency
diversity
gain
ofparameter
downlink
switch
off,
itFunction:
should
beThis is,
parameter
indicates
thebe
time
the
longeroff
initial
power
intelligently.
dedicated
channel,
the
value
switched
quickly,
and
it
interval
between
two
kept.
Configuration
Rule:
when
the
is
0dB.
needs to reduce the
downgrade
P-CPICH
The
this
parameter
frequency
isof
determined
to is,
If thesmaller
switch
is
off,
E-AGCH
possibility
of
call
drop.
power
used
to
the
shorter
power
switch
off,
itinitial
should
beoffbe is,
Power
Offset
isswitch
The
smaller
this
parameter
frequency
intelligently.
kept,
and
the
higher
switched
quickly,TTI)
andorit
EagchPOTti2(2ms
the
more off
smoothly
the
Configuration
Rule:
The
time
probability
of the
power
be
needs
to reduce
the
EagchPOTti10(10ms
TTI)
in
frequency
be
switched
off,
Interval
between
two
affect
by
error
TPC.
possibility
of
call
drop.
single
radio
link
condition
the less possibility of call or
downgrade
oflonger
P-CPICH
The
bigger
this
parameter
in
DCH
diversity
drop,
butmacro
the
the is,
Power
must
longer
enough
the
longer In
P-CPICH
power
condition.
this
way,
Iub
frequency
be
switched
off. to
complete
cell
reconfiguration
decreasing
time,parameter
longeris,
reconfiguration
isthe
reduced.
The
bigger this
and
handover
UE
to
other
time
frequency
be the
switched
the less
smoothly
cell.
And it be
needs
to ensure
off.
frequency
switched
off,
the
frequency
be
switched
The
smaller
this
parameter
is,
and
the
more
possibility
ofisoff
Parameter
Function:
This
quickly.
the
shorter
P-CPICH
power
call
drop.
service
typetime,
identification
If
this parameter
is
big, it
decreasing
thetoo
shorter
paramater.
would
need
a
long
time
to
time frequency be switched
Configuration
Rule: Different
decreasing
power,
off. But if theP-CPICH
parameter
is too
services
and
need
afrequency
longare
timewould
to
small,
thewhich
be
distinguished
by traffic
class,
switch
offoff
thewhen
frequency.
switched
the Ues
in
CN
domain
If
this
parameter
is too small,
the
cell
had indicator,
not handover
to
direction
and
maximum
bit
the
cell
reconfiguration
other frequency, it wouldmight
rate
should
have
not
complete
anddifferent
P-CPICH
make
call drop.
service
type identification.
power decreasing
have not
Adjustment
Suggestion:
took effect when
next time PIt
is configured
according
Primary
key can
not be toor
CPICH
power
decreasing,
cell
condition.
modified.
UEs in this cell have not
already handover to other
cells which make call drop
happen.
It is configured according to
cell condition.
Fixed
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
It is usually configured by 0.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
It is related with the

positioning function, and is
used in Cell ID/Cell ID+RTT
survey, the measurement
result is returned to CN. It is
described according to actual
cell condition.
cell condition.The Larger the
value is, the confidence the
It
is related
result
is. with the
configured according to cell
condition.The wider the
interior corner is, the larger
cell coverage is.
cell condition.
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Don't Care
No
N/A
cell condition.
Fixed
No
N/A

current SW version
Fixed
No
N/A
cell condition.
Fixed
No
N/A
cell condition.
Fixed
No
N/A
Fixed
No
YES
Fixed
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed
No
Yes
It is used in AGPS
positioning. It is configured
according
to AGPS
Function: This
parameter
information
attainment
from
indicates ifhandover
RNC
supports
Function:
switch
RNC or HS-DPCCH
reference network.
HSDPA
based on IMSI, limit the
ACK/NACK
enhancement.
range of cells
for allowed for
Configuration
Rule: This
access or handover
parameter
is
configured
according to IMSI of UE
according
to whether
Configuration
Rule: the
operator
hasbased
purchased
the
If handover
on IMSI
HSDPA
HS-DPCCH
shall be expected, the
ACK/NACK
parameter isenhancement
"On", and some
license.
UEs will not allowed to
when
accessthis
or parameter
handover tois
Function:
DTM
support
configured,
it needs
to think
unauthorized
cells
according
indicator
of
the Load
information
to IMSI
of UE,
which may
Configuration
Rule:
Validity
in the configured
lead to increase
callservice
rejection
continuity,
user
experience,
duration.If
the
duration
is too
rate and handover failure
GSM
equipment
capability
long,
the
load
information
rate.
If
is
validity
is not garanteed,
and
If the
the parameter
parameter
is "On",
"Off", UE
When
UE with
CS
PS
ifcan
theaccess
duration
tooand
short,
or is
handover
to the
service
simultaneously
moves
load
information
cannt be
any cell.
to
inter-RAT
adjacent
cells,
fully used.
CS and PS service handover
to inter-RAT cell in parallel via
DTM mechanism, which
guarantees service continuity
and improve user experience.
If the parameter is "Off", PS
service will be interrupted
when UE handover to
GERAN via cell reselection
procedure.
Network
Planing&Optimi No
zation
YES
Fixed
No
YES
Fixed
No
YES
Fixed-keep
monitoring
No
Yes
Fixed
No
YES
Fixed
No
YES
Fixed
No
YES
Fixed
No
Yes
Fixed
No
YES
Fixed
No
Yes
Fixed
No
YES
Function of this parameter: it

indicates if RNC supports
MBMS Enhanced Broadcast
Mode.
Function:
Used
for used,
indicating
If the MBMS
is not
this
whether
2SF2+2SF4
parameter
is invalid can be
used by UE.
parameter should be
configuredInter-RAT
to "1: allowed"
if
Function:
handover
uplink four
codeload
channels are
based
on GSM
It
is related
the
required
by with
theRule:
operator.
Configuration
positioning
function,
andtois
If
the parameter
is "On"
used
in LCS
method
choice.
provide
handover
more
It
is
configured
according
efficient. As UMTS can to
RNC
supporting
acquire
the load lcs
condition in
accurancy.
GSM, inter-RAT handover
based on GSM load is taken
into consideration in order to
avoid access failure in GSM
Function:
This
parameter
because of
overload
in GSM
indicates
whether RNC UE
system.Simultaneously,
supports
MBMS
call drop may
be UE
happened
registration
over
Iur function.
duing to limit of handover
to
Configuration
Rule: If RNC
GSM.
supports
MBMS is
UE"Off",
If the parameter
registration
over
Iur
function,
access failure
in
GSM
may
Function:
This
parameter
the
value ifshould
be to
set to
be happened
duing
indicates
RNC
supports
"Support"
overload
of GMS.Mode.
MBMS
Multicast
Configuration: If RNC
supports MBMS Multicast
function, the value should be
set
"Support"
It is to
related
with the NACC
function.if
license
supported
cell
NACC
function
and
monitoring switch RNC
support
NACCRule:
this parameter
Configuration
is the
configured
1, else
0. RNC
If
parameter
is "On",
will monitor neighboring cell,
which will guarantee mobility
continuity
and avoid
Function: This
parameter
unnecessary
interference,
indicates if RNC
supports PS
thereby
decrease
callfor
drop
Conversational
RAB
VoIP
Function:
ps
handover
rate.
Configuration:
If
RNC
support
indicatoris "Off", RNC
If
the parameter
supports
PS Conversational
Configuration
Rule:
service
will
not
monitor
neighboring
RAB
for
VoIP
and
this
continuity,
user
experience,
cell.
function
is paid, the
value
GSM equipment
capability
should
be set to "Support"
If the parameter
is "On",
PS
domain
VOIP
When
UE with
PSservice
servicewill
be
supported
if
the
moves to inter-RATparameter
adjacent
is
set PS
to "Supported".
Function:
This parameter
cells,
service
handover to
indicates
RNC
supports PS
inter-RATifcell
, which
Signalling
for IMS
guaranteesRAB
service
continuity
Configuration:
If RNC
and improve user
experience.
supports
PS Signalling
If the parameter
is "Off",RAB
PS
for
IMS will
andbe
this
function is
service
interrupted
paid,
should
when the
UE value
handover
to be set
to
"Support"
GERAN via cell reselection
Ps
domain IMS signalling
procedure.
service will be supported if
the parameter is set to
"Supported".
Network
Planing&Optimi No
zation
YES
Fixed
No
Yes
Fixed
No
YES
Fixed-keep
monitoring
No
YES
Function of this parameter: it

indicates if MBMS PTP
Service can be Beared on
HSDPA, so that increase the
rate of MBMS services.
rate of MBMS services
If the operator turn on this
function,
MBMS
Service
Function:the
service
handover
in
PTP
can
be
Beared
on
indicator
HSDPA,
so
that
it
increase
Related factor:
the
of MBMS
Therate
parameter
is "ON" to
services.Otherwise
the in
control service allocation
MBMS or
PTP
Serviceexample,
in PTP
UMTS
GSM.For
cannot
beared
onPS
HSDPA,
AMR is be
in GSM
and
data
the
rate
will
be
limited.
service is in UMTS.
If
the
is not
used, this
If
the MBMS
parameter
is "Off",
Function:
This
parameter
parameter
is
invalid
service
handover
stategy
indicates
if RNC supports
doesn't perform.
Function:
Used
for indicating
WB-AMR
Speech
whether
provide
the
Configuration:
If RNC
redirection
infomation
in RRC
supports WAMR,
the value
Connection
Reject
message.
should be set
to "Support"
Configuration Rule: For the
operator that has interfrequency or inter-RAT
adjacent cell, if the switch is
on, when the RNC is
It
is used in
Cellmake
ID/Cell
overload,
it can
UE
ID+RTT
survey,
the
redirect to
inter-frequency
cell
measurement
result is
or inter-RAT cell.
returned to CN. It is
condition.
It is used in Cell ID/Cell
ID+RTT survey, the
measurement result is
condition.
It is used in Cell ID/Cell
ID+RTT survey, the
measurement result is
condition.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
antenna condition.
Fixed
No
N/A
It is usually configured by 0.
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
cell
condition.
When
UE is detected
entering specific area from
non-specific area, or entering
non-specific area from
specific area, RNC refers the
SAI responding to the Cell-ID
of current UE cell as
positioning result, and
transmits
location
report toto
It is configured
according
CN through
Iu port.Larger the
cell
condition.The
value is, the confidence the
result is.
result
is returned
to CN. It is
It is related
with the
described according
to actual
positioning
function, and
is
cell
usedcondition.
in Cell ID/Cell ID+RTT
condition.The wider the
interior corner is, the larger
cell coverage is.
It is configured through
actural test
described
It is relatedaccording
with the to actual
cell
condition.
described according to actual
cell condition.
Fixed
No
N/A
cell condition.
Don't Care
No
N/A

according actual cell
condition.
Fixed
No
N/A

condition.
Fixed
No
N/A

condition.
Fixed
No
N/A

condition.
Don't Care
No
N/A
The parameter is not used in

current SW Version.
fixed
No
N/A
Parameter Index
Fixed
No
N/A
when this parameter is

configured, it needs to
consider that if RNC require
ue to report the location
measurement result when the
UE has radio link in DRNC.
Don't Care
No
N/A
This parameter is for future

use.
Don't Care
No
N/A
This parameter is for future

use.
N/A
This parameter is configured

according to the actual net
planning.Only when the cell
possesses the HSDPA
capability, the parameter is
valid.
Fixed-keep
monitoring
No
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
Yes
N/A
Don't Care
No
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
This parameter is configured

according to the actual net
planning.Only when the cell
possesses the HSUPA
capability, the parameter is
valid.
The
functionthis
of this
parameter:
parameter
parameter:
this
parameter
This
parameter
is forthreshold
future
indicates the trigger
indicates
the
GPS
Accuracy
use.
for UTRAN GPS common
Class
measurement
of OnDemand
The
type involved factor for setting
this
The for setting
The parameter:
involved factor
implemented
accuracy
class
this
parameter:
UE
The
function
of this
depends
on
the
UE
positioning
methods,
UE
parameter:
this parameter
positioning
methods
that are
positioning
measurement
indicates
the
threshold
to
supported.
Accuracy
requirement
trigger
UTRAN
GPS
common
Suggestion
setting
this
Influence
of for
this
parameter:
measurement
report
of
parameter:
this
parameter
the
less of the
value, the is
OnDemand
type
depends
on
the
UE
easier
to trigger
UTRAN
GPS
The
involved
factor
forand
setting
positioning
methods,
not
common
measurement
of
this
parameter:
UE
suggest
to
adjust
OnDemandmethods,
type; the UE
larger of
positioning
the
value, the
more difficulty
positioning
measurement
to
trigger UTRAN
GPS
Accuracy
requirement
common
measurement
of
OnDemand
type.Accuracy
the less of the value, the
Class
20000UTRAN
chip, GPS
easierAtoistrigger
Accuracy
Class B is 20 chip,
common measurement
report
Accuracy
Classtype;
C: Xthe
chip.
of OnDemand
larger
Parameter
Index,
not suggest
of the value,
the more
Suggestion
for setting
this
modifed.
difficulty to trigger
UTRAN
parameter:
not
suggest
to
GPS common measurement
adjust
report
of
OnDemand
type
Parameter function: network
Suggestion
for setting
planning parameter.
iurthis
parameter:
not suggest to
interface
parameter.
adjust
Parameter
controlling factor:
Parameter
function:
the MNC BCD
code Iu
length of
interface
parameter. cells.
It
the Iur neighbouring
specifies the time for the
DATA FORWARDING
procedure in the Iu.
the delay of relocation
procedure.
The general value is 5s.
current SW version.
Parameter function: Iu
interface paramter.
shall
be larger
than the
Parameter
function:
Iu
RESET
process
delay in the
interface parameter.
CN.
It shall be equal or larger than
the RESET process delay in
the RNC, and shall be
smaller than the
corresponding parameter
value in the CN. The general
value in the CN is 20s.
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
Yes
N/A
Fixed-keep
monitoring
Yes
N/A
Network
Planing&Optimi Yes
zation
YES
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
N/A
RELOCATION
REQUIRED
source RNC shall
stop the
message,
it
shall
timer Trelocprep, start
start the
the
timer
timer Trelocprep.
TrelocoverallUpon
and
reception
terminate of
thethe
Relocation
RELOCATION
COMMAND
Preparation procedure.
If the
message
SRNC shall
Iu Releasethe
procedure
is not
stop
the towards
timer Trelocprep,
initiated
the source
and
terminate
the relocation
RNC from the CN
before the
preparation
procedure.
If
expiry of timer
Trelocoverall,
there
is no response
from the
the source
RNC should
CN
to the
initiate
theRELOCATION
Iu Release
REQUIRED
message
before
Request procedure
towards
timer
Trelocprep
expires
in
the CN withfunction:
a cause Iu
value
Parameter
the
SRNC,
the
SRNC
shall
"Trelocoverall
expiry".It
interface
parameter.
cancel
thethe
relocation
Parameter
controlling
specifies
protectionfactor:
time
preparation
by
the
delay
of procedure
the
relocation
for the
RNC
processing
the
initiating
the relocation cancel
procedure.
RESET
RESOURCE
Parameter
function:
Iu
procedure
with
the CN. value
The
smaller
parameter
message
from
the
interface
parameter.
appropriate
value
the
means
the controlling
shorterfor
resource
Parameter
factor:
Parameter
controlling
factor:
cause
IE,
e.g.
"Trelocprep
suspension
in
the
SRNC.
the
process
delay
of
the
Iu
the
process
delay
of
the
IuBut
expiry".
ifglobal
it
is
too
small,
the
CN
may
procedure.
global
procedure.
Parameter
controlling
factor:
not
resource
Thefinish
largerthe
value
means
the
The
larger
value
the
process
delayhelps
and to
releasement.
longer
interrupted
service
decrease
the
message
success
rate ofRNC
the
relocation
If
thebetween
parameter
value
time
and
retransmission,
but
mayCN.
procedure
induces
the
contrary
result.
The
too
small
value
may
cause
the RNC
waiting
time
The
larger
value
means
The
general
value
is
8s. thethe
causes
the
RNC
not
finish
is
too
long.
Parameter
function:
the
longer
relocation
preparation
resource
release
inhelps
time.
The
value
to
switch
emergency
call
time smaller
in of
thethe
SRNC
and helps
decrease
the
delay
RRC
redirection
function.
to increase
thewaiting
success
ratein
the
RNC,
but
may
cause
the
Parameter
controlling
factor:
of the
relocation
prepare
CN
not
finishing
the
If
GSM can but
provide
procedure,
also more
increase
procedure
inthe
time
and cause
accurate
location
service,
the
delay
of
relocation
Function:
This
parameter this
redundant
message
parameter
can
be set
to 1 for
procedure.
specifies
the
IuUP
Version
in
retransmission.
higher
location
quality,
or else
Theinter-RAT
smaller
value
induces
the
case.
itthe
shall
be setresult.
to
0. The
contrary
Configuration
Rule:
parameter indicates the IuUP
Function:
Thisboth
parameter
version when
Verion1
specifies
the
IuUP
Version in
and Version2 are supported
the
intra-RAT
case.
by the
CN during
the 2G to
Configuration
The
3G RelocationRule:
procedure.
parameter indicates the IuUP
version when both Verion1
and Version2 are supported
by the CN in the RAB
Parameter
the
assignmentfunction:
or intra system
switch
of
the
SCUDIF(video
Relocation procedure.
call fall back) function.
the function on or off.
Parameter
Parameter function:
function: network
RNC
level switch of Cell Broadcast
parameter.
the CPU overload
Service
function
Parameter
function:
network
threshold
of
the CDT/MR
Parameter
controlling
factor:
function.
the
functionthe
turns
on orofoff.
parameter.
switch
the
IMEI
acquisition
function
in
RNC system performance,
the
CDT.
the data size of the CDT/MR.
Parameter
controlling value
factor:
function
on
or
off,
RNC
means the higher CPU
system
overloadperformance.
threshold, the later
If
the
function
turnssending
on, it may
the
RNC
stopping
influence
the
RNC
system
out the CDT/MR data, and
performance.
the larger the data size, but
the influence to the RNC
system performance is more
heavily.
means the lower CPU
overload threshold and the
lighter influence of the data
acquisition of the CDT/MR
function to the RNC system
performance, but the RNC
thus stops sending out the
CDT/MR data later and the
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

parameter. the switch of the
Parameter
function: network
CDT function.
parameter.
the
period of the
function
on function:
or off.
Parameter
network
location measurement
report
in
the MR function.
parameter.
the switch of
the
Parameter controlling
factor:
MR
function.
Parameter
function:RNC
network
location precision,
Parameter
controlling factor:
system performance.
function
on the
or
off.
parameter.
period
of the
The smaller
value
means
the
non-location
measurement
collected measurement
report
themore
MR function.
reportsinare
denser and
Parameter
controlling
accurate, but
the RANfactor:
and
report
precision, RNC
system
UE performance
drop is
performance.
heavier.
The
valuemeans
meansthe
the
The smaller
larger value
collected
measurement
influence of the MR function
reports
are more
denser and
to the RAN
and UE
Parameter
function:
thebut
RLC
accurate,
but
the
RAN
and
performance
is
lighter,
it
mode
of
the
Uu
measurement
UE
performance
drop is of
decreases
the precision
report.
heavier.
the collected measurement
Parameter
controlling
factor:
The
larger value
means
the
reports.
Parameter
function:
Parameter
function:
network
RNC
system
performance.
influence
of
the
MR
function
maximum
number
ofis set to
Generally,
to
the RANthe
andvalue
UE
retransmissions
of
theMode
RRC
parameter.
the
1(:
Unacknowledged
performance
is measurement
lighter,
but it
CONNECTION
REQUEST
type
in
the
MR
function.
Parameter
function:
RLC)
to decrease
the of
decreases
the
precision
message.
For
details,
please
Parameter
controlling
factor:
Maximum
Number
influence
to
the
Uu of
interface
the
collected
measurement
refer
to
"Parameter
the
measurement
report
Retransmissions
of
the
performance.
reports.
Description".
acciquisitionUPDATE
requirement
CELL/URA
Parameter
controlling
factor:
Especially For
note:
Bit2-period
Message.
details,
please
the
success
rate
and
time
quality
refer
tomeasurement
"Parameter usually
delay
of the
RRC
turns
off,
since
it isconnection
found that
Description".
setup.
some
kind
of
SonyEricsson
Parameter
controlling
factor:
Parameter
function: value
The
larger
parameter
UE
will
shut
down
when
this
the
success
rate
and
time
Maximum
Numberthe
of success
helps
to increase
measurement
is
started.
delay
of
the
CELL/URA
Retransmissions
of the UE
rate
of the RRC connection
update.
CAPABILITY
INFORMATION
setup,
but itparameter
may cause
The
larger
Message.
For
details, value
please
excessive
message
helpsto
to"Parameter
increase the success
refer
Parameter
function:
retransmission
in the Uu
and
rate
of the CELL/URA
update
Description".
maximum
number
of "in to
sync"
increase
the
time
delay.
and
avoid
the
UE
going
Parameter
controlling
factor:
received
L1 in failure,
The
smaller
value
IDLE
duefrom
to parameter
update
the
success
rate
and
time
connected
mode
before
the
helps
to
decrease
the
Uu
but
it may
cause
the
delay
of the
UEdecrease
capability
Parameter
function:
timer
T312Connected
messages
and
the
excessive
Uu message
enquiry.
maximum
number
of "in sync"
expires.
time
delay
of
the
RRC
retransmission
and
increase
The
larger
parameter
value
received
from
L1
inbut
idle
mode
Parameter
controlling
factor:
connection
setup,
it may
the
time
delay
of
the
update
helps
to
increase
the
success
before
the
timer
T312Idle
the
time
delay
and
veracity
of
decrease
the
success
rate.
procedure.
rate
of the UE CH
capability
expires.
the
dedicated
The
smaller
value
enquiry,
butcontrolling
itparameter
may
cause
the
Parameter
factor:
establishment,
the the
time
delay
helps
to
decrease
Uu
excessive
Uu
message
the
time
delay
and
veracity
of
of
the status
transfer
to the
messages
and
the time
delay,
retransmission
and
increase
the
dedicated
CH
dedicated
CH,
callbut
it maydelay
decrease
the
the
time
of
the
enquiry
establishment,
the
time
delay
reestablishmen
number
and
success
rate
and
cause
the
procedure.
of
the RRC
connection setup
call-drop
rate
UE
going
to
IDLE
due
to
The
smaller
parameter
on
dedicated
CH, call- value
The
smaller
parameter
value
update
failure.
helps
to
decrease
the Uuand
reestablishmen
helps to quickennumber
the
messages
andestablishment
the time delay,
call-drop
dedicatedrate
CH
but itsmaller
may decrease
thevalue
The
parameter
procedure,
but
too smaller
success
rate.
helps
to quicken
the
value may
not guarantee
the
dedicated
CH establishment
synchronization
veracity.
procedure,
but too smaller
value
value
may
not
guarantee
helps to guarantee
the the
synchronization
Andit
synchronization veracity.
veracity, but
may
to the
increase
RL
may cause
increase
time delay.
FAIL IND number, callreestablishment number and
increase call-drop rate.
The larger parameter value
helps to guarantee the
synchronization veracity, but it
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

the time delay and veracity of
Parameter
function:
the RL failure
indication, callmaximum
number
of
reestablishmen
number
and
successive
"in
sync"
received
call-drop rate
from
L1 during
T313 is value
The smaller
parameter
activated.
For details,
please
helps to quicken
the UE
refer
to
"Parameter
reporting
RL
failure
and
Parameter function: Waiting
Description".
triggerAfter
call-reestablishment
Time
UE Sending RRCto
Parameter
controlling
factor:
guarantee the
service
quality,
CONNECTION
SETUP
the
synchronization
time
but it may cause
redundant
REQUEST
Message.
For
delay
and
veracity
the to
due
details,
please
referofto
dedicated
CH,
callradio
quality
fluctuation.
"Parameter Description".And
reestablishmen
number
and
may cause controlling
to increase
RL
Parameter
factor:
call-drop
Parameter
function:
Waiting
FAILround-trip
IND rate
number,
the
time calldelay
The
smaller
parameter
value
Time
AfterUE
UE
Sending
reestablishment
number
and
between
and
UTRAN
helps
to
quicken
the
CELL/URA
UPDATE
increase
call-drop
rate.value
The
larger
parameter
synchronization
procedure,
Message.
details,
please
The
larger
parameter
value
means
theFor
longer
waiting
time
but
may
not
guarantee
refer
to
"Parameter
helps
to
guarantee
the
and the longer delay forthe
the
synchronization
veracity.
And
Description".
veracity,
butfunction:
it may
increase
UE's
REQUEST
message
Parameter
Waiting
may
cause
to
increase
RL
Parameter
controlling
factor:
the
time
delay
of
the
RL
retransmission.
If
the
first
Time After UE Sending UE
FAIL
IND
number,
callthe
round-trip
between
failure
indication,
postpone
REQUEST
message
is UE
CAPABILITY
INFORMATION
reestablishment
number
and
and
UTRAN.
the call-reestablishment
and
failure,
it increases
theplease
time
Message.
For details,
increase
call-drop
rate.
The
smaller
parameter
value
thus
not
guarantee
the
delayto
of"Parameter
the RRC setup
refer
The
larger
parameter
value
means
the
longer
waiting
time
service
quality
in time.
procedure.
Description".
helps
to
guarantee
the
of
the
retransmission,
it
helps
Parameter
function:
Period
The
smaller
parameter
value
Parameter controlling factor:of
synchronization
veracity,
butis
to
the
update
Cell/URA
Update
When
UE
may
cause
thebetween
UE
to resend
theshorten
round-trip
UE
may
increase
the
time
delay.
procedure,
but may cause
in
useless
REQUEST
and
UTRAN.
redundant
in
CELL_FACH/CELL_PCH/UR
messages,
waist
the ULvalue
The
smallerretransmission
parameter
the
Uu.
A_PCH
State.
For
details,
RACH resource
DL time
means
the longerand
waiting
The
smaller
parameter
please
refer
to "Parameter
common
channel
resourc
and
of
the
retransmission,
itvalue
helps
Parameter
function:
waiting
means
the
shorter
waiting
Description".
add
interference
to
the
to shorten the enquiry UL
time
for
reentering
of the
retransmissino,
it
Parameter
controlling
factor:
and
DL.
procedure,
but mayservice
cause
area
after
UE
is
helps
to
avoid
redudant
the
time delay
ofout
theoflost in
redundant
retransmission
service.
For details,
please
retransmission,
butand
may
touch
UE
the Uu.between
refer
to
"Parameter
elongate
the
update
UTRAN.
Description".
procedure.
The
larger
value
means
the parameter
shorter waiting
Parameter
controlling
factor:
helps
to
decrease
the
Parameter
function:
Waiting
time of the retransmissino,
it
the
time
delay
of the
UERRC
trying
signaling
load
in
Uu,
but it
Time
After
Sending
helps
to avoid
redudant
reentering
service
postpones
the detection
CONNECTION
RELEASE
retransmission,
butarea,
may of
avoidance
of
UE
going
tothe
Parameter
function:
Waiting
the
UE losing
touch
with
COMPLETE
in
elongate
the Message
enquiry
IDLE
Time
After
Requesting
RNC.
CELL_DCH
procedure. State. For
The
smaller
parameter
Connection
Establishment
in
The
smaller
parameter
value
details,
please
refer to value
helps
to
shorten
the
time
Other
System(eg.
GSM).
For
helps
to
quicken
the
detection
"Parameter
Description".
Parameter function: Waiting
delay
of
the
UErefer
trying
to
redetails,
please
tofactor:
of thefor
UE
losing
touch
with
Parameter
controlling
Time
Receiving
"In
Sync"
enter
service
area,
but
may
"Parameter
Description".
RNC,
but
itof
increases
the
the time
delay
the RRC
from
L1 in
Connected
Mode.
quicken
UE
going
torefer
IDLE
Parameter
controlling
factor:
signaling
load
in the
Uu.
connection
release.
For
details,
please
to
due
to
reselection
failure.
the
rate and
time
Thesuccess
smaller
parameter
value
"Parameter
Description".
The
larger
parameter
delay
of
the
PS
inter-rat
helps
to
shorten
the
RRC
Parameter controlling value
factor:
helps
to and
postpone
UE
handover
from
3G
to
2G
Parameter
function:
Waiting
release
letand
thethe
UE
going
the time
delay
success
going
to
IDLE,
but
may
The
larger
parameter
value
Time
for
Receiving
"InCH
Sync"
to IDLE
a.s.a.p.
rate
of
the
dedicated
increase
the
time
helps
to in
let
the
UEdelay.
accessing
from
L1
Idle
Mode.
For
The larger
parameter
value
establishment,
the
time
delay
2G
as
far
as
possible,
details,
please
refer
to and
increases
therate
time
of
and
success
ofdelay
the
increase
the
success
"Parameter
Description".
the RRC
release
status
transfer
to and
the rate of
the
inter-rat
handover,
but
Parameter
controlling
postpone
the
UE goingfactor:
to it
dedicated
CH
increases
the
time
delay
and
the
time
delay
and
success
IDLE.
may of
cause
the service
quality
rate
dedicated
helps
tothe
shorten
the CH
drop.
establishment,
time delay
synchronizationthe
procedure,
The
smaller
parameter
and
ratethe
of the
RRC
but itsuccess
may cause
UEvalue
helps
to
shorten
the
time
connection
setup
giving up checking
delay
and guarantee
The
smaller
parameter
synchronization
and thevalue
service
quality,
but
helps
to
shorten
theit
indicating the establishment
decreases
success
rate
synchronization
procedure,
failure,
andthe
decreases
the
of
the
handover.
but
it may
cause
thededication
UE
success
rate
of the
giving
up checking
CH establishment.
synchronization
and value
indicating
the
establishment
helps to let the UE trying
failure,
and
decreases theas
checking
synchronization
success
rate ofand
the dedication
far as possible
increase
CH
establishment.
the success
rate, but it
The
larger the
parameter
value
elongates
procedure.
helps to let the UE trying
checking synchronization as
far as possible and increase
the success rate, but it
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Don't Care
No
YES
Don't Care
No
N/A
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Time
for Completion
of Cell
For details,
please refer
to
Update
When
Radio
Link
"Parameter Description".
Fails
and Radio
Bearer(s)
Parameter
controlling
factor:
Associated
withand
T314
Exist.of
the time delay
veracity
For
details,
please
refer
to
the RL
failure
indication.
Parameter
function:
Waiting
"Parameter
Description".
The smaller
parameter
Time
for Completion
of value
Cell
Parameter
controlling
factor:
helps toWhen
quicken
the UE
Update
Radio
Link
whether
the
service
suitable
reporting
failure
and
Fails
and RL
Radio
Bearer(s)
for
or to
trigger
Associated
with T315 Exist.
not,
the
success
rate
the
guarantee
the
service
quality,
For details, please refer tocallreestablishment
and call-drop
but
may cause
redundant
"Parameter
Description".
Parameter
function:
Waiting
rate,
the time
delay of
thetoCS
due
Parameter
controlling
factor:
Time
for
Cell
RB
release.
radio
quality
fluctuation.
whether
the service
suitable
After
The
larger
parameter
value
The
larger
parameter
value
for
or
UE
is
out
of
Service
in
helps
to success
postponerate
thethe
UEcallhelps
to
increase
the
veracity
not,
the
CELL_PCH/URA_PCH
State.
releasing
CSand
RB,call-drop
and
avoidthe
redundant
call-to
reestablishment
For
details,
please
refer
increase
the success
of
reestablishment,
butofitrate
rate,
the time
delay
the PS
"Parameter
Description".
the
cell update
andreporting
callpostpones
the
UE
RB
release.
Parameter
controlling
factor:
reestablishment,
and
RL
failure
and
later
callThe
larger
parameter
value
the
time
delay
of
the
cell
decrease
call-drop
rate,
reestablishment,
causing
the
helps
to postpone
the
UEbut
reselection
in PCH
status.
may
elongate
the
release
service
quality
may
not
be
releasing
the
PS
RB,
The
larger
parameter value
when
guaranteed.
increase
theUE
success
rate of
helps
to let
doing cell
failure.
the
cell update
and
callreselection
while
keeping
The
smaller parameter
reestablishment,
and value
PCH
status.
helps
to
quicken
the
release
decrease
call-drop
rate,
but
The
smaller
parameter
value
of
the
CS
RB,
but
it
may
may
elongate
the
release
Function:
Used
for
the
MBR
can
shorten
the time UEthe
cause
the
UE
when
value
in
the
DLreleasing
Controled
keeping
in
PCH
status,
CS
RB
prematurely
andand
failure.
MBR
function.
let
the
UE
transfer
to FACH
decrease
the
success
rate ofis
The
smaller
value
ofparameter
this
parameter
status
sooner
when
UEvalue
is out
the
call-reestablishment.
helps
tothe
quicken
the release
larger,
MBR after
of service.
Function:
Controled
of
the
PSisDL
RB,
but
it mayMBR
modified
larger.
The
parameter
value
Switch.
cause
the
UE
releasing
The
value
of
this
parameter
equaling to 0 can let thethe
UE is
Configuration
Rule:
To turn on
PS RB prematurely
and
smaller,
theCELL_FACH
MBR
after
transfer
to
the
function,
the
MBR
of
CN
decrease
success
rate
of
modified
isthe
smaller.
status
immediately
when
the
assignment
can
be
modified,
the
UE is out of service area in
itPCH
is mainly
some
status,used
and for
trigger
cell
testing
scene..
reselection with the cause
To
turn off the
function,
thein
"re-entering
service
area"
MBR
CN assignment can't
FACHofstatus.
be
modified.
This
parameter is not used in
current SW version.

current SW version.
parameter. the switch of the
MR
function.
Function:
Used for the MBR
Parameter
factor:
value in thecontrolling
UL Controled
function
on
or
off.
MBR function.
larger, the MBR after
Function:
Controled MBR
modified isUL
larger.
Switch.
Configuration
Rule:
To turn on
smaller, the MBR
after
the
function,
the
MBR
modified is smaller. of CN
assignment can be modified,
it is mainly used for some
testing scene..
To turn off the function, the
MBR of CN assignment can't
be modified.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: This parameter is

the access class barred
indicator for AC0-AC15.Cell
selection/reselection to the
barred cell will be prohibited,
but handover to the cell is
allowed.
Function:
Cell Rule:
Barred
Configuration
This
Indicator.
parameterCell
is determined by
to the
the operator.
barred
cell will be prohibited,
If the corresponding
bit is "0",
but
handover
toparameter
the cell, the
isis
which
means
Function:
This"barred"
allowed.
UE with
this access
class is
cell
reservation
extension
Configuration
Rule: This
not permit to access.
indicator.
parameter
is determined
If
the corresponding
bit isby
"1",
Configuration
Rule: This
the
operator.
which
means
"not
barred"
,
parameter is determined by
If the
parameter
value isclass
UE
with this access
the
operator.
"Barred",
users
will not
be
is itnot
permit
to access.
If
is set
'reserved',
if the
acessed
in
the
cell.
value of Intra-frequency Cell
If
the parameter
valueisis'not
"Not
Reselection
Indicator
Barred",
users
will
be
allowed', UEs shall behave as
acessed
in the
cell. is
if cell status
"barred"
indicated. And if cell status
Function:
extend
Function:
Cell
Identity
status 'notTo
barred'
is the
indicated
minimum
value
of
Configuration
Rule:
This
, the "Cell Reservation
QrxLevMin(the
minimum by
parameter
Extension" is
is determined
invalid.
required
RX
level)
the
operator.
Adjustment Suggestion: This
Configuration
parameter willRule:
not becell
used.
covering radius.
If the parameter
Function:
The parameter
"DltaQRxLevMinPr"
is "True",
value
is
"True"
to extend
Qrxlevmin=Qrxlevmin
+ the
cell
reselection
criteria.
DeltaQrxlevmin.
Configuration
Rule: cell This
Function:
This
parameter
covering
radius.
parameter
would
be set in
indicates
whether
If
the
parameter
isHCS
"True",
scenario with large
cell
serving
cell
information
Qrxlevmin=Qrxlevmin
+ is
radius.
configured
or not.
DeltaQrxlevmin.
If
the parameter
value is This
Adjustment
Suggestion:
Function:
The
parameter
"True",
HCS
will
be
parameter would beused
set inand
value
is
"Intra-frequency
H
criterion
will
be
fufilled
in
scenario with large cell Cell
Reselection
Indicator"
for
process
reselection.
radius. of cell
enabling
UE
toparameter
register
If the parameter
value isin
Function:
This
intra-frequency
cells.
"False", HCS
will not factor
be used
indicates
the scaling
for
Configuration
the
and
H criterionRule:
will
not
cell reselection
timer
forbethe
continuity
of cellcase.
selection.
fufilled in process
of cell
inter-frequency
If
it is set "Allowed",
it would
reselection.
Configuration
Rule: the
decease
the
posibility
of This
call
Adjustment
velocities
of Suggestion:
Ues, the risk
of
drops
with
the
intra-frequency
parameter will
notpong,
be used.
re-selection
ping
the
reselection.
change
ofInter-frequency
signal.
Function:
If
is parameter
set "Not
Allowed",
If itthe
is it
Scaling
Factor
forvalue
would incease
the
posibility
smaller,
cell
reselection
will of
Treselection
Configuration
call
drops without
the
intrabe
triggered
easily
and
the
Tag.
frequency
reselection.
risk
re-selection
pingispong
If theofparameter
value
would
encrease.
Function:
Inter-RAT
"True", "InterFreqSf"Scaling
will be
If
the in
parameter
value
Factor
for
Treselection.
used
calculate
the is
bigger, cell reselection
Configuration
thewillofbe
treselection
in Rule:
HCS state
triggered
hard
thethe
riskrisk
of revelocities
of Ues,
of
high mobility.
selection
ping
pong
would
re-selection
pingvalue
pong,isthe
If the parameter
decrease.
change
signal.
"False", of
"InterFreqSf"
will not
Adjustment
Suggestion:
If
the
parameter
value
be used in calculate
theis This
parameter
not bestate
used.
smaller,
cellwill
reselection
will
treselection
in
HCS
of
be
hightriggered
mobility.easily and the
risk
of re-selection
ping pong
Adjustment
Suggestion:
This
would
encrease.
parameter
will not be used.
bigger, cell reselection will be
triggered hard and the risk of
call drops would encrease.
parameter will not be used.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No
Function: Inter-RAT Scaling

Factor for Treselection
Configuration Tag.
"True", "InterRatSf" will be
Function:
This parameter
used in calculate
the
indicates
theinmaximum
treselection
HCS state of
number
of cell reselections in
high mobility.
case
of
HCS
usage.
If the parameter
value is
Configuration
Rule: the
"False", "InterRatSf"
will not
velocities
Ues,
thethe
risk of
be
used inof
calculate
Function:
This
parameter
re-selection
ping
pong,
theof
treselection
HCS
state
indicates
thein
maximum
risk
call
highofmobility.
number
of drops.
cell reselections in
If
the of
parameter
value
is This
Adjustment
Suggestion:
case
Non-HCS
usage.
smaller,
UE
will
enter
the
high
parameter willRule:
not bethe
used.
Configuration
mobility
easierly.
Function:
Duration
for
velocities of Ues, the risk of
If
the parameter
isthe of
Evaluating
Allowed
Amount
re-selection
pingvalue
pong,
bigger,
UE drops.
will enterinthe
highof
Cell
Reselection(s)
Case
risk
of
call
mobility
hard.
Non-HCS
Usagevalue
(Non-is
If the parameter
Adjustment
HCS_TCRmax)(s).
smaller, UE Suggestion:
will enter theThis
high
Function:
This
parameter
parameter
will
not
bethe
used.
Configuration
mobility easily.Rule:
indicates
the
additional
velocities
of Ues,
the risk
of
If the parameter
value
istime
period
before
the
UE
can
re-selection
ping
pong,
the
bigger, UE will enter the high
revert
low-mobility
risk
of to
call
drops.
mobility
hard.
measurements
invalue
caseisofThis
If
the parameter
Adjustment
Suggestion:
non-HCS
usage.
smaller,
UEwill
willnot
enter
the high
parameter
be used.
Configuration
mobility hard. Rule: the
Function:
If operater
velocities
of
Ues,value
theexpect
risk
If
the parameter
is of
Function:
This
parameter
is a
that
some
cells
are
not
re-selection
ping
pong,
the
bigger,
UE
will
enter
the
high
switch
indicating
whether
allowed
to
accessed, the
risk
of call
drops.
mobility
easily.
inter-RAT
information
parameter
value
is "Reserved
If
the
parameter
value
is This
Adjustment
Suggestion:
used
for cell
"parameters
in SIB3.UEwill
smaller,
willnot
enter
the low
parameter
be
used.
reselection
areRule:
configured
Configuration
This or
mobility easily.
not.
parameter
is
determined
If the parameter value is by
Configuration
the
operator.
bigger,
UE willRule:
enter the low
Timeliness
of
If
the value
is measurements
'reserved', the
mobility
hard.
and
the consumption
of This
cell
cannot
be
campped
on,
Adjustment
Suggestion:
Function:
Quality
Threshold
battery
energy
of
UEs
except
for
particular
UEs,
if
parameter
will
not
be
used.
Level
for Applying
Prioritised
If
parameter
value
is
sothe
indicated
in the
system
Hierarchical
Cell Reselection
"True",
UE judges
whether to
information.
(QHcs)
When
Measurement
perform
inter-RAT
If the value is 'not reserved',
Quantity
is CPICH
Ec/No(dB).
measurement
on the
the
cell can
bebased
campped
on.
Function:
Quality
It
guarentees
the Threshold
access
parameters
configured
by
Level
quality.
RNC. for Applying Prioritised
Hierarchical
Cell
Configuration
Rule:
HCS,
If the parameter
value
is the
Reselection(QHcs)
When
change
"False", of
UEsignal.
performs
the
Measurement
Quantity
is
When
HCS
is used,
if the
inter-RAT
measurement
CPICH
RSCP(dBm).It
parameter
value
is
smaller,
H
periodically.
Function:
Reselection
guarentees
the
access
criterion
will
be
fulfilled
Adjustment
The
Hysteresis
1Suggestion:
of Serving
Cell
quality.
easierly
and
cell
reselection
operator
can
set
the
value
(QHyst1s)(dB).
Configuration
HCS,and
the
will
be triggered
easierly,
"false"
for cell Rule:
reselection
Configuration
Rule:
the
risk
of
change
of
signal.
vice
versa.
being
triggered
quickly.
re-selection
ping
pong,
the
When
HCS
is
used,
if
the
Function:
Reselection
change
of signal.
parameter
value
isbe
smaller,
Hysteresis
1 ofnot
Serving
CellH
parameter
will
used.
The
greater
these
hysteresis
criterion
be fulfilled
for
UE inwill
CELL_FACH
State
parameters,
the
likely the
easierly and
cell less
reselection
(QHyst1s,
FACH
)(dB).
cell
reselections
occur,
will
be
triggered
easierly,
andof
Configuration Rule: the and
risk
the
better
the
slow
fading
vice
versa.
re-selection ping pong, the
resistance
capability,
butThis
the
Adjustment
Suggestion:
change
of signal.
slower
the
reaction
to
the
parameter
not be
used.
The
greaterwill
these
hysteresis
environment
changes.
parameters, the
less likely the
Adjustment
Suggestion:
cell reselections
occur inIf the
signal
fluctuate
quickly,
this
CELL_FACH, and the better
parameter
should
be set
the
slow fading
resistance
larger.
capability, but the slower the
reaction to the environment
changes.
Adjustment Suggestion: If the
signal fluctuate quickly, this
larger.
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Network
Planing&Optimi No
zation
N/A
Hysteresis 1 of Serving Cell

for UE in CELL_PCH or
URA_PCH State (QHyst1s,
PCH)(dB).
Configuration Rule: the risk of
change of signal.
The greater
these hysteresis
Function:
Reselection
parameters,
less likely
Hysteresis 2 the
of Serving
Cellthe
cell
reselections
occur
in
(QHyst2s s)(dB).
CELL_PCH,
thethe
better
Configurationand
Rule:
risk of
the
slow
fading
resistance
capability,
but
the slower the
Function:
change ofReselection
signal.
reaction
to 2
the
Hysteresis
ofenvironment
Serving
If
the parameter
value isCell
changes.
for
UE incell
CELL_FACH
smaller,
reselectionState
is
Function:
Reselection
Adjustment
Suggestion:
If the
(Qhyst2s,
FACH)(dB).
easierly triggered
in
Hysteresis
2
of
Serving
Cell
signal
fluctuate
quickly,
this
Configuration
Rule:
the
risk
CELL_DCH, and vice versa.of
for
UE in CELL_PCH
orthe
parameter
should
be set
re-selection
ping pong,
Adjustment
Suggestion:
If the
URA_PCH
State
(QHyst2s,
larger.
change
of
signal.
signal fluctuate quickly, this
PCH)(dB).
If
the parameter
is
parameter
shouldvalue
be set
Configuration
Rule:
the risk
smaller,
reselection
is of
Function:
This
parameter
larger. cell
re-selection
ping
pong,
the
easierly triggered
in
indicates
the minimum
change
signal.level of the
CELL_FACH.
requiredofquality
The
greater
these hysteresis
Adjustment
Suggestion:
cell
which
satisfies
the If the
parameters,
thequickly,
less
likely
signal fluctuate
thisthe
condition
of being
selected
or
cell
reselections
occur
in
Function:
parameter
parameterThis
should
be
set the
reselected
by UE.
When
CELL_PCH,
the better
indicates
minimum
larger. the and
measurement
quantity
is
the
slow
fading
resistance
required
received
power
CPICH Ec/No, only
the level
capability,
but
thesatisfies
slower
the
of
the cell which
theis
measured
quality
of
the cell
reaction
toofthe
environment
condition
being
or
over
Qqualmin
canselected
the cell be
changes.
reselected
selected. by UE. When the
Adjustment
Suggestion:
measurement
quantity
Configuration
Rule:
cellisIf the
Function:
This
parameter
signal
fluctuate
quickly,
this
CPICH
RSCP,
only
the
covering radius.
indicates
the measurement
parameter
should
be
set
measured
received
power
If the parameter
value is and
quantity
for cell selection
larger.
level
of the
is over
smaller,
cellcell
reselection
reselection.
Qrxlevmin
canRule:
the
cell
Function:
This
parameter
criteria
is easier
fullfilled
Configuration
thebe, and
selected.
indicates
the
inter-RAT
vice
versa.
accuracy of measurement
Configuration
Rule:
cell The
measurement
triggering
Adjustment
Suggestion:
quantity
used
for
judgment.
covering
radius.
threshold
for HCS
cell
default
value
is
The
measurement
quantity is
If
the parameter
value
is used
reselection(SHCS,
RAT)
recommended.
Cpich
EcNo when
the
value
smaller,
cell
reselection
by
UE
to
judge
whether
is"1" .And if the value is inter"1",
criteria
is easier
, and
RAT
should
be
Cpichmeasurement
EcNo
and fullfilled
Cpich
RSCP
vice
versa.
performed.
must fulfill R criterion.
Adjustment
Suggestion:
Theis
Configuration
Rule:quantity
The measurement
default
value
is
Timeliness
ofwhen
measurements
Cpich RSCP
the value
recommended.
and
consumption
is"2"the
.And
if the value of
is "2".
Function:
SHCS,
battery
energy
of RAT
UEs.
Cpich RSCP
must
fulfill R
Configuration
Tag.
If
the parameter
value is
criterion.
Function:
ThisRule:
parameter
Configuration
TheThis
bigger,
inter-RAT
Adjustment
Suggestion:
indicates
whether
the
cell
quality
of
Cpich
RSCP
to
measurement
parament
sets will
"1" be
usually.
judge
.
performed easierly, and vice
parameters
are broadcast
If
the parameter
value is in
versa.
SIB3
or
SIB4.
"True",
"SHCSRat"
be
If "SHCSRatPre"
is will
"False",
Configuration
rule:
Are the
the
used
to judge
whether
Function:
Inter-Frequency
this parameter
is invalid.
cell
measurement
of inter-RAT
Measurement
Trigger
Adjustment
Suggestion:
HCS
parameters
with
will
be
performed
in process
Threshold
for
Cell
will not be used. Connected
The
default
mode
need
to
set the same
of
cell is
reselection.
Reselection
(Sintersearch)
value
recommended.
as
the
cell
(dB).
Configuration Rule:
parameters
with
idle mode.
Timeliness of
measurements
Adjustment
Suggestion:
and the consumption of The
parameters
of cell
selection
battery
energy
of UEs.
and
only
If thereselection
parameterare
value
is
broadcast
in
SIB3.
The
bigger, measurements for
default
value is neighboring
inter-frequency
recommended.
cells are easierly triggered ,
and vice versa.
parameter is set by operater
planning.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Configuration Rule:
Timeliness of measurements
and the consumption of
battery energy of UEs.
SInterSearchPre is setted as
Function:
Intra-Frequency
"true" to avoid
UE power
Measurement
consumption. Trigger
Threshold
for
Cell
If the value
is False,
Function:
Sintrasearch
Reselection
(Sintrasearch)
Sintersearch
is
not configured
Configuration Tag.
(dB).
to
UE,
and
UE
performs
the
Configuration Rule:
Configuration
Rule:
inter-frequency
measurement
Timeliness
of measurements
Timeliness
of
measurements
periodically
according
to the
and
the consumption
of
and
the
consumption
period inicated
byUEs.
the of
battery
energy of
battery
energy
ofis UEs.
parameter
Treselections.
This
parameter
a switchAnd
If
the
parameter
value is
then
,
the
cell
reselection
indicating whether
bigger,
measurements
for or
would
be
quickly.
Sintrasearch
is configured
intra-frequency
neighboring
Function:
HCS
Priority
Adjustment
Suggestion:
It
not.
If the High
value
is False,
cells
triggered
Inter-system
wouldare
beeasierly
set Cell
False
for cell
Sintrasearch
is not
configured
which
more
battery
Measurement
Threshold
for
reselecting
quickly
when
we
to
UE, causes
and UE
performs
the
energy
consumption
,
and
Cell
Reselection
(Slimit,
need.
intra-frequency
measurement
vice
versa. according to the
SearchRAT)(dB).
periodically
Adjustment
Suggestion:
Configuration
Rule:
period inicated
by the This
parament
set big to
Timeliness
ofoften
measurements
parameterisTreselections.
If
reselection
cell
quickly.
and
the consumption
of
the value
is True,
battery
energy
UEs.
Sintrasearch
is of
configured
to
function:
Speed
Dependent
When
HCS
is
used,
if the
UE, andFactor
UE judges
Scaling
for whether
parameter
is bigger,
to perform value
the intra-frequency
Treselection.
measurement
on
inter
measurement.
Configuration Rule:
the-RAT
risk of
neighbofing
cells
of
highthe
Adjustment
Suggestion:
It
re-selection ping pong,
priority
will
beFalse
triggered
would
be
set
for
cell
velocity
of
Ues.
Function:
Speed
Dependent
easiler,
and
vice value
versa.
reselecting
quickly
when
If
the parameter
is we
Scaling
Factor
for
Adjustment
Suggestion:
HCS
need.
smaller,
cell
reselection
will
Treselection
Configuration
will
not
be
used.
The
default
be
triggered quickerly, and
Tag.
Function:
Measurement
value
is recommended.
vice
versa.
Configuration
Rule:forthe
Trigger
Threshold
HCS
Adjustment
Suggestion:
This
velocity
of Ues.
Cell
Reselection
parameter
will not
be used.
If
the
parameter
value
is
(SsearchHCS)(dB).
"True",
"SpSf" Rule:
will bethe
used
Configuration
cellin
calculate
the
treselection
in
camp.
HCS
state
of
high
mobility.
Adjustment
Suggestion:orThis
bigger,
inter-frequency
parameter
will not be used.
will
be
performed
easierly,
and
Function: SsearchHCS
vice
versa. Tag.
Configuration
If
"SSearchHCS
Pre"the
is usage
Function:
Inter-System
Configuration
Rule:
"False",
Measurement
Trigger is
of
HCS. this parameter
invalid.
Threshold
for Cell
If the parameter
value is
Adjustment
This
Reselection
(Ssearch, RAT)
"False", the Suggestion:
parameter
parameter
will
not
be
used.
(dB).
SSearchHCS is not
Configuration
configured. Rule: The cell
camp
andThis
the consumption
Function:
parameter of
battery
energy
of UEs.
indicates the barred
time of a
If
the
parameter
barred cell. Cell value is
bigger,
measurements
tofor
the
interRAT
neighboring
cells
barred cell will be prohibited,
are
easierly
triggered
, and
Function:
This
but handover
toparameter
the cell
is
vice
versa.
indicates
the
period
for
allowed.
The
value is
configured
evaluating
allowed
Configuration
Rule:amount
The by of
network
planner.
cell
reselection(s)
in case of
planning
of operater.
HCS
Whenusage.
the cell is barred, if the
Configuration
Rule: the
parameter is larger,
the
velocities
of of
Ues
and thecell is
barred time
a barred
change
longer. of signal.
smaller, UE will enter the high
mobility easierly, and vice
versa.
parameter will not be used.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No

Function:
Thisadditional
parameter
indicates the
time
indicates
the
cell
reselection
duration before the
UE
timer
value.
UE
shall reselect
transits
from
high-mobility
Function:
This
parameter
the
new
cell
if
the
new
cellinis
state
to
low-mobility
state
indicates the cell reselection
better
ranked
than
the
case
of
HCS
usage.
timer value the UE shall use
serving
according
Configuration
Rule:mode
theto the
in
RRC cell
connected
cell-ranking
criterion
during
velocities
of Ues and
the
state
CELL_FACH
if R
provided
a
time
interval
indicated
by
Function:
This
parameter
change
signal.
in
SIB4, of
otherwise
Treselections.
indicates
the
cell
reselection
If the parameter
value
is
Treselections
shall
be used.
Configuration
Rule:
the
of
timer
value
the
UE
shall
use
smaller,
UE
will
enter
therisk
low
UE shall
reselect
the
new
cell
ping
pong,
the
in
RRC
connected
mode
mobility
easierly,
and
vice
ifre-selection
the
new
cell
is best
ranked
change
of to
signal.
states
and
versa. CELL_PCH
according
the cell-ranking
If
the
parameter
isatoo
low,
URA_PCH
ifSuggestion:
provided
in
Adjustment
This
criterion
R during
time
ping-pong
reselection
will
be
SIB4,
otherwise
Treselections
parameter
will notby
bethe
used.
interval
indicated
cell
happened
easierly,
and
if
the
shall
be
used.
UE
shall
reselection timer value.
Reduced
service
outage
parameter
isnew
too
high,
mayof
reselect
the
cell
if itthe
Configuration
Rule:
the
risk
period
cell
reselection
resultcell
inafter
too
longranked
cell the
new
is best
re-selection
ping
pong,
and
channel
typecell-ranking
switching,
reselection
delay,
which
according
the
change
of to
signal.
by
introducing
a
network
influences
the
normal
criterion
R duringisatoo
time
If the parameter
low,
option
toindicated
allow
tocell
operation
of
cellthe
reselection.
interval
byUE
the
ping-pong
reselection
will
be
send
message
onvalue.
RACH
Adjustment
Suggestion:
will
reselection
timer
happened
easierly,
and ifItor
the
act
on
received
message
on
be
set
smaller
to
reslect
cell
Configuration
Rule:
the
risk
parameter is too high, it mayof
FACH
before
complete
quicklyin
on
other
re-selection
ping
pong,
result
toospeedway(or
long
cell the
reading
of
high-speed
scenes.)
change
of signal.
reselection
delay, which
SIB11/SIB11bis/SIB12.
If the
Function:
UE
If
the parameter
is too low,
influences
theinter-frequency
normal
system
block
is
large,
the
event
report
configuration
ping-pong
reselection
will
be
operation
of cell reselection.
Function:
intra-frquency
deffered
system
information
index
for
Cpich
EcNo
happened
easierly,
and
if
the
Adjustment
Suggestion:
It will
measurement
quantity
reading
canisbe
taken
Configuration
Rule:
It into
isitinmay
parameter
too
high,
be
set
smaller
to
reslect
cell
deffered
system
information
account.
configured
by
network
result
inon
too
long
cell
quickly
speedway(or
other
reading
Function:
deffered
system
planner
according
to
the
reselection
delay,
which
high-speed
scenes.).The
Function:
UE
inter-frequency
Configuration
Rule:
intrainformation
reading
switch
network
condition.
influences
the
normal
default
value
is
event
report
configuration
frquency
Configuration
Rule:
access
In
order
tointerference,
operation
offacilitate
cell
reselection.
recommended.
index
for
Cpich
RSCP
measurement
accuracy
delay
maintenance
and
the
Adjustment
Suggestion:
Configuration
Rule:
It version
is It will
Taking
account
ofvalue
Cpich
If
the
parameter
"0",
upgrade,
the
criterion
isis cell
be
set
smaller
to
reslect
configured
by
network
EcNo
being
more
precise
deffered
SIB
reading
is
not
suggested
as follows:
quickly on
speedway(or
other
planner
according
to the
Function:
UE
inter-frequency
than
Cpich
RSCP
for
intraused.
high-speed
scenes.).The
network
condition.
event
report
configuration
frequency
handover
If
the
parameter
default
value
is is "1",
In
order
toCpich
facilitate
index
for
EcNo
evaluation
,
Cpich
EcNo
is
deffered
SIB
reading
is
used,
100+Y*10+Z
recommended.
maintenance
and
the
version
Configuration
Rule:
It
is
suggested
in
intra-frequency
which
will reduce
system
-X value
range:
(0,
1),is
upgrade,
criterion
configured
by
network
in
general.the
information
reading
time
and
measurment
quantity
is Cpich
suggested
as follows:
planner
according
to
the
access
delay.
Function:
UE
inter-frequency
EcNo, X is 0; measurment
network
condition.
event
report
configuration
quantity
is
Cpich
RSCP, X is 1
In
order
to
facilitate
index
for
Cpich
RSCP
-Y
value
range:
(0..9),
For
100+Y*10+Z
maintenance
and
the
version
Configuration
Rule:
It
is
-X valuethe
range:
(0, 1),is
upgrade,
criterion
configured
byquantity
networkis
,measurment
Y is 0; for
Cpich
suggested
as follows:
planner
to the
EcNo, Xaccording
is 0; measurment
network
condition.
P2,
Y is 1;
other value
is Xused
quantity
is
Cpich
RSCP,
is 1
In
order
to
facilitate
for
future
extension.
-Y
value
range:
(0..9),
For
100+Y*10+Z
maintenance
and(0..9),
the version
-Z value range:
-X valuethe
range:
(0,
1),is
upgrade,
criterion
Corresponds
the
different
,measurment
Y is 0; for quantity is
suggested
service
typeas follows: Cpich
EcNo,
X
is 0; measurment
separately(TrfCategory)
P2,
Y is 1;
other value
is Xused
quantity
is
Cpich
RSCP,
is 1
for
future
extension.
-Y
value
range:
(0..9),
For
100+Y*10+Z
-X value range:
1),
Corresponds
the (0,
different
,measurment
Y is 0; for quantity
is Cpich
service
type
EcNo,
X
is
0;
measurment
P2,
Y is 1;
other value
is Xused
quantity
is Cpich
RSCP,
is 1
for
future
extension.
-Y value range: (0..9), For
-Z value
(0..9),
Invalid,
notrange:
support
period
Corresponds
the
different
measurement
, Y is 0; for
service
type
P2,
Y is 1; other value is used
for future extension.
service type
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Invalid, not support period

measurement
Function:
inter-frequency
Function: UE
Sevice
type in interevent
report
configuration
index
for Cpich EcNo
configuration
Configuration
Configuration Rule:
Rule: It
It is
is
configured
by
network
configured by network
planner
to
Inter-frequency
Function:
UE
inter-frequency
planner according
according
to the
the
network
condition.
Measurement
Configuration
event
report
configuration
network
condition.
In
order
toCpich
facilitate
Index
Related
toRSCP
Traffic
index
for
maintenance
the
Category
Configuration and
Rule:
It version
is
upgrade,
the
criterion
is
Configuration
Rule:
It is
suggested
as
follows:
configured
by
network
planner
according
to
the
Function: UE inter-frequency
planner
according
to the
network
condition.
event
report
configuration
network
condition.
In
order
to
facilitate
index
for Cpich EcNo
100+Y*10+Z
maintenance
and
the version
Configuration
Rule:
is
-X valuethe
range:
(0, It1),
upgrade,
criterion
is
configured
by
network
measurment
is Cpich
suggested
asquantity
follows:
planner
according
to
the
Function:
inter-frequency
EcNo, X isUE
0; measurment
network
condition.
event
report
configuration
quantity
is
Cpich
RSCP, X is 1
In
order
toCpich
facilitate
index
for
RSCP
-Y
value
range:
(0..9),
For
100+Y*10+Z
maintenance
and
the
version
Configuration
Rule:
It
is
-X valuethe
range:
(0, 1),is
upgrade,
criterion
configured
byquantity
networkis
,measurment
Y is 0; for
Cpich
suggested
as follows:
planner
to the
EcNo, Xaccording
is 0; measurment
network
condition.
P2,
Y is 1;
other value
is Xused
quantity
is
Cpich
RSCP,
is 1
In
order
to
facilitate
for
future
extension.
-Y
value
range:
(0..9),
For
100+Y*10+Z
maintenance
and(0..9),
the version
-Z value range:
-X valuethe
range:
(0,
1),is
upgrade,
criterion
Corresponds
the
different
,measurment
Y is 0; for quantity is
suggested
service
typeas follows: Cpich
EcNo,
X
is 0; measurment
P2,
Y is 1;
other value
is Xused
quantity
is Cpich
RSCP,
is 1
for
future
extension.
-Y
value
range:
(0..9),
For
100+Y*10+Z
-X value range:
1),
Corresponds
the (0,
different
,measurment
Y is 0; for quantity
is Cpich
service
type
EcNo,
X
is
0;
measurment
Function:
Sevice
type
in
intraseparately(TrfCategory)
P2,
Y is 1;
other value
is X
used
quantity
is measurement
Cpich
RSCP,
is 1
frequency
for
future
extension.
-Y
value
range:
(0..9),
For
configuration
Configuration
Rule:
It is
Corresponds
different
,configured
Y is 0; for bythe
network
service
type
planner
according
to the
Function:
Sevice
type
in
P2,
Y
is
1;
other value
is intraused
network
condition.
frequency
measurement
configuration
Configuration
Rule:
It isoffset
Function: HCSthe
priority
Corresponds
different
configured
by
network
Configuration
service type Rule: ue
planner
according
to the
mobility
speed
network
condition.
If the parameter is bigger, the
priority is smaller, ue will
relection to lower priority cells
Function:
offset in
of MBMS Additional
in low mobility
R
criteria of cell reselection
state.
Configuration
Rule: cell In
reselection
levelwill
general, thisdifficult
parameter
If
the
not
beparameter
adjusted. is bigger, the
relsection to MBSM cell is
triggered easierly.
Adjustment Suggestion: In
general, this parameter will
not be adjusted.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
planner
to the
Function:according
UE inter-Rat
event
network
condition. index for
In
order
to facilitate
Cpich
RSCP
maintenance
the
Configuration and
Rule:
It version
is
upgrade,
the
criterion
configured by networkis
suggested
as follows:
planner according
to the
network condition.
(TrfCatRatMIdx+1)*1000+X*1
In order to facilitate
00+Y*10+Z
maintenance and the version
-X valuethe
range:
(0, 1),is
upgrade,
criterion
measurment
quantity
suggested as follows: is Cpich
EcNo, X is 0; measurment
quantity is Cpich RSCP, X is 1
-Y value range: (0..9), For
00+Y*10+Z
-X value UE
range:
(0, 1),period
Function:
inter-Rat
,measurment
Y is 0; other
value is is
used
quantity
Cpich
report
configuration
index
for
for
future
extension.
EcNo,
X
is
0;
measurment
Cpich
EcNo
-Z valueisrange:
(0..9),
quantity
Cpich
RSCP,
Configuration
Rule:
The X is 1
Corresponds
the
different
-Y
value
range:
(0..9),
For
period
report
is
not
used
in
service
type
handover,
so
this
Function:
UE inter-Rat
period
,configuration
Y is 0; other
value
used
will
notis
be
report
configuration
index
for
for
future
extension.
added
or modified.
Cpich
RSCP
Configuration
Rule:
The
Corresponds the
different
period
report
is
not
used
in
service type
handover,
so
this
Function: The paramter is the
configuration
will not
be
service type index
in interadded
or
modified.
RAT measurement
configuration
Configuration
Rule: Itdifficult
is
Function: Handover
Function:
This
parameter
is
configured
by network
level
is controlled
by adjusting
the
configuration
planner
accordingindex
to theof the
the
parameter.
inter-RAT
measurement
network condition.
Configuration
Rule: handover
parameters
on traffic
difficult level,based
handover
type.
timeliness
Configuration
Rule:
It isis
If the parameter
value
configured
by network
smaller,
inter-RAT
handover
planner
according
to the the
will be triggered
easierly.If
network
condition.
Function:
To
extend
the
parameter value is larger,
minimum
value
of
inter-RAT handover will be
QrxLevMin(the
minimum
triggered harderly.
For
required
RX
level)
different neighboring cells,
Configuration
cell
Different valueRule:
will be
set to
covering
radius tendency.
reflect handover
Function:
ToSuggestion:
extend
theis For
If
the parameter
value
Adjustment
minimum
value
of
smaller,
inter-RAT
handover
the scenario that signalling
QrxLevMin(the
minimum
will
be triggered
easierly,
quality
varys quickly,
this and
required
RXshould
level) be set
vice
versa.
parameter
Configuration
Rule:
cell This
Adjustment
Suggestion:
small
to proctect
handover
Function:
To
extend
covering
radius
parameter
would be the
set in
timeliness.
minimum
value
ofis "True",
If
the parameter
scenario
with large
cell
QrxLevMin(the
minimum
Qrxlevmin=Qrxlevmin
+
radius.
required
RX level)
DeltaQrxlevmin.
Configuration
Rule: cell This
covering
radius
parameter
would be set in
Function:
To extend
theis
If
the parameter
value
scenario
with
large
cell
minimum
value
of
smaller,
inter-RAT
handover
radius.
QrxLevMin(the
will be triggeredminimum
easierly, and
required
RX level)
vice versa.
Configuration
Rule: cell This
covering
radius
parameter would be set in
If
the parameter
is "True",
scenario
with large
cell
Qrxlevmin=Qrxlevmin
+
radius.
DeltaQrxlevmin.
scenario with large cell
radius.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: The parameter is

used to judge the downlink
load state of GSM cells.
Configuration Rule: inter-Rat
handover probability
If
the parameter
is smaller,
Function:
The parameter
is
GSM
is
thought
to
be
used to judge the downlink
overload
by UTRAN
RT load state
of GSMmore
cells.
easily
in
inter-RAT
Configuration Rule:handover,
inter-Rat
then handover
to GSM is
handover
probability
triggered
more difficultly,
and
If
the
parameter
is smaller,
Function:
The parameter
is
vice
versa.
GSM
is thought
touplink
be load
used
to
judge
the
Adjustment
Not
overload
by Suggestion:
UTRAN
more
state
of GSM
cells.this
suggest
to
modify
easily
in inter-RAT
Configuration
Rule:handover,
inter-Rat
parameter
then handover
to GSM is
handover
probability
triggered
more difficultly,
and
If
the parameter
is smaller,
Function:
The parameter
is
vice
versa.
GSM
is thought
touplink
be RT
used
to
judge
the
Adjustment
Suggestion:
Not
overload
by
UTRAN
more
load
state
of
GSM this
cells.
suggest
to
modify
easily
in inter-RAT
Configuration
Rule:handover,
inter-Rat
parameter
then handover
to GSM is
handover
probability
triggered
more difficultly,
and
If the parameter
is smaller,
vice
versa.
GSM is thought to be
Adjustment
Not
overload by Suggestion:
UTRAN more
suggest
to
modify
this
Function:
HCS
priority
easily in inter-RAT handover,
parameter
Configuration
UE is
then handoverRule:
to GSM
mobility
triggeredspeed
more difficultly, and
If
theversa.
parameter value is
vice
smaller,
the Suggestion:
priority of theNot
Adjustment
Function:
the
minimum
GSM
cell
is
lower.
suggest to modify
this
required
RX
level
UE
will
reselection
to the
parameter
Configuration
cell
higher priority Rule:
cells in
low
coverage
area
mobility state and reselection
If
parameter
valueinishigh
tothe
th low
priority cells
smaller,
cell
reselection
mobility
state.
Function: the minimum
criterion
fulfilled
required will
RX be
level
easierly, and vice
versa.
Configuration
Rule:
cell
Adjustment
Suggestion: In
coverage area
general,
this
parameter
Function:
To extend
theiswill
If the parameter
value
not
be
adjusted.
minimum
value
of
bigger, cell reselection
QrxLevMin(the
criterion will be minimum
fulfilled
required
RX level)
easierly, and
vice versa.
Configuration
Rule: cell In
covering
radius
general, this
parameter will
Function:
To extend
theis
If
the
value
not
beparameter
adjusted.
minimum
value ofhandover
bigger, inter-RAT
QrxLevMin(the
easierly, and
required
RX level)
vice versa.
Configuration
Rule: cell This
Function:
To
extend
covering
radius
parameter would be the
set in
minimum
value
ofis "True",
If
the parameter
scenario
with
large
cell
QrxLevMin(the
minimum
Qrxlevmin=Qrxlevmin
+
radius.
required
RX level)
DeltaQrxlevmin.
Configuration
Rule: cell This
covering
radius
parameter
would be set in
Function:
To extend
theis
If
the parameter
value
scenario
with
large
cell
minimum
value
of
smaller,
inter-RAT
handover
radius.
QrxLevMin(the
easierly, and
required
RX level)
vice versa.
Configuration
Rule: cell This
covering
radius
If
the parameter
is "True",
scenario
with large
cell
Qrxlevmin=Qrxlevmin
+
radius.
DeltaQrxlevmin.
scenario with large cell
radius.
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Function: HCS priority

Configuration Rule: UE
mobility speed
smaller,
of the
Function:the
thepriority
minimum
UTRAN
cell
is
lower.
required quality level
UE
will reselection
Configuration
Rule:to the
higher priority
cells in
neighboring
RNC's
celllow
mobility
state
and reselection
reselection
difficult
level, cell
to
th low priority
cells in high
covering
radius
Function:
the minimum
mobility
state.
If
the parameter
value is
required
quality level
smaller,
cell
selection
Configuration Rule: criterion
will be fulfilled
easierly,
neighboring
RNC's
cell and
vice
versa. difficult level, cell
reselection
Adjustment
Suggestion: In
covering radius
general,
this
parameter
Function:
the
minimum
If the parameter
value iswill
not
be
adjusted.
required
RX
level
smaller, cell selection criterion
Configuration
will be fulfilled Rule:
easierly, and
neighboring
vice versa. RNC's cell
coverage
area
Adjustment
Suggestion: In
If
the parameter
value iswill
general,
this
Function:
theparameter
minimum
smaller,
cell
reselection
not be adjusted.
required
RX level
criterion
will beRule:
fulfilled
Configuration
easierly,
and
vice
neighboring RNC'sversa.
cell
Adjustment
Suggestion:
In
Function:
neighboring
GSM
coverage area
general,
this parameter
cells
If
the state
parameter
value iswill
not
be adjusted.
Configuration
Rule: network
smaller,
cell reselection
planning
criterion will be fulfilled
If
only cell
reselection
to GSM
easierly,
and
vice versa.
cell
is
expected,
this
Adjustment Suggestion: In
parameter
could
be set "IDLE
general, this
parameter
will
STATE".
not be adjusted.
Function:
neighboring
If cell reselection
and GSM
Function:
cell
reselection
cells
priority
handover to GSM Cell are
penalty
time
Configuration
network
expected,
this Rule:
parameter
Configuration
Rule:GSM
cell
planning
could be including
set "IDLE
reselection
difficult
level
cells'location,
GSM
cell's
STATE+DCH STATE".
The
greater
this parameter
is,
signaling
quality
etc..
the
more
difficult
cell is
If the
parameter
value
Function:
cell reselection
reselection
be
smaller,time
thewill
neighboring
GSM
penalty
triggered.Different
value
can
cells'
prority
is
higher.
Configuration
Rule:
cell
Function:
quality
threshold
be
configured
by
different
reselection
level
level
in HCSdifficult
neighboring
cells,parameter
which willis,
The
greater
this
Configuration
Rule: cell
reflect
thedifficult
different
the more
cell
reselection
difficult
level
reselection
tendency
of
reselection
will
be triggered.
When
HCS
is
used,
if the
neighboring
cells.
Different
value
can
be
parameter
value
is
smaller,
Function:
quality
threshold
Adjustment
Suggestion:
In H
configured
by
different
criterion
will
be
fulfilled
level
in HCS
general,
this parameter
neighboring
whichwill
will
easierly
and cells,
cell
reselection
Configuration
Rule:
cell
not
be
adjusted,
because
reflect
the
different
will
be triggered
easierly;
and
reselection
level
Qoffset
candifficult
be used
to
reselection
tendency
ofis
ifWhen
the parameter
value
HCS
is
used,
if
the
control
the
tendency
of
cell
neighboring
cells. will be
bigger,
H criterion
parameter
value
is
smaller, H
reselection
more
precisely.
Adjustment
Suggestion:
fulfilled
harderly
and cell In
criterion
will
be
fulfilled
general,
this parameter
will
reselection
triggered
easierly
andwill
cellbebecause
reselection
not
be
adjusted,
harderly.Different
value can
will
be triggered
easierly;
Qoffset
can beby
used
to and
be
configured
different
ifcontrol
the
parameter
value
the
tendency
ofiscell
neighboring
cells, which
bigger,
H
criterion
will
bewill
reselection
more precisely.
reflect
the
different
fulfilled harderly and cell
reselection
of
reselection tendency
will be triggered
neighboring
cells.
harderly.Different value can
Adjustment
Suggestion:
be
configured
by differentIn
general,
this cells,
parameter
neighboring
whichwill
will
not
be
adjusted,
because
reflect the different
Qoffset
cantendency
be used to
reselection
of
control
the
tendency
of cell
neighboring cells.
reselection
precisely.
Adjustment more
Suggestion:
In
general, this parameter will
not be adjusted, because
Qoffset can be used to
control the tendency of cell
reselection more precisely.
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No
Function: quality offset of

neighboring cells
Configuration Rule: cell
reselection
difficult
level,
Function: quality
offset
ofcell
neighboring
cells
If
the parameter
value
Configuration
Rule:
cellis
smaller,
cell
reselection
reselection difficult level,will
cell
be
triggeredtendency
easierly; and if
reselection
the
parameter
value
is is
bigger,
If
the
parameter
value
Function:
temporary
offset
in
cell
reselection
will
be
smaller,
cell reselection will
cell
reselection
triggered
harderly.Different
be
triggered
easierly;
and if
Configuration
Rule: cell
value
can be configured
by
the
parameter
value
is
bigger,
reselection
difficult level,
cell
different
neighboring
cells,
cell
reselection
will be
reselection
tendency
which
willharderly.Different
triggered
The
greater
this parameter
is,
Function:
temporary
offset
reselection
tendency
of byin
value
candifficult
be
configured
the
more
cell
cell
reselection
neighboring
cells.
different neighboring
cells,
reselection
willRule:
be cell
Configuration
which
will
reflect
the
different
triggered.Different
value
can
reselection
difficult
level,
reselection
tendency
of cell
be
configured
by
different
reselection
tendency
neighboring
cells.
neighboring
cells,parameter
which willis,
The
greater
this
Adjustment
Suggestion:
SIB
reflect
the
different
the
more
difficult
cell
12
is
not
used,
so
this
reselection will
tendency
reselection
be be of
parameter
will
not
neighboring
cells.
triggered.Different
value can
adjusted.
Adjustment
Suggestion:
be configured
by differentIn
general,
this
parameter
will
neighboring
cells,
which
will
Function:
broadcast
in SIB11
not
be
adjusted,
because
reflect
the different
or
SIB11bits.Because
the
Qoffset
can
be function
usedblock
to
Function:
HCS
reselection
tendency
of
system
information
control
the
tendency
of cellis
switch
neighboring
cells.
length is limited, SBI11bits
reselection
precisely.
Configuration
Rule:
Adjustment more
introduced,
ifSuggestion:
the
numberInof
If
the
parameter
value
iswill
general, this cells
parameter
neighboring
exceed
the
"True",
HCS
will
be
used
and
not be
because
limit
of adjusted,
SIB11, then
SIB11bits
H
criterion
fufilled
Qoffset
canwill
bebe
used
to in
will
be used.
process
of
cell
reselection.In
control
the
tendency
Configuration
Rule: of
Function:
L3 filtering
oncell
the
general,
HCS
is
not
used.
reselection
more
precisely.
neighboring
cells
Function:
used
to number,
delay event
measurement
results
neighboring
cells
priority
reporting,
decrease
average
Configuration
Rule:
signal
If
this
Parameter
is
the
handover
times and"0",
avoid
quality variation,
neighboring
cells
will
be
error
handover
measurement timeliness
Function:
configuration
index
broadcasted
SIB11.
Configuration
Rule:
average
If the value
isinbigger,
this
of
the
inter-frequency
If
this
Parameter
is
"1",
handover
times,
handover
measurement has less the
measurement
parameters
neighboring
cells
will
be
success
UE
moving
impact
onrate,
final
interConfiguration
Rule:
Itarea
is
broadcasted
in
SIB11bits.
speed
andmeasurement
handover
frequency
configured
by
network
When
neighboring
cells
The
bigger
this parameter
results.
Otherwise,
if the is,
planner
according
to
thetrigger
exceed
limition,
the
less
possibility
isthe
to
valus
is the
smaller,
this
network
condition.
parameter
will
be
set
"0" for
this
event.
Consequently,
measurement has more
In
order
to
facilitate
high
priority
neighboring
cells.
average
handover
times
impact.
maintenance
and
decrease
and
the the
risk version
of This
callAdjustment
Suggestion:
upgrade,
the
criterion
drop
increase.
Onsuggested
the is
other to
parameter
is not
suggested
side,
when as
thisfollows:
parameter
be adjusted.
becomes smaller, the more
possibility is to trigger this
100+Y*10+Z
event, average handover
Function:
purpose
-X value
range:
(0,and
1),
times
increase
and
may
functions
of
inter-frequency
measurment
quantity
is Cpich
result in error handover.
measurement
index
EcNo,
X is 0;Suggestion:
measurment
Adjustment
for
Configuration
Rule:
quantity
is Cpich
RSCP,
X is 1
the scenario
that
handover
Each
-Y value
range:
(0..9),
For
area
isinter-frequency
small
or UE
moves
measurement
index should
has a be
fast, this parameter
function
note.
different
,Function:
Y is
0; For
usedIfto
indicate
set
small.
indexes
have the
same
measurement
event
function,
have
the
P2, Y is 1;they
other
value
issame
used
Configuration
Rule:
3GPP
note.Any
new
added
index
definition
should
have
a function
-Z value
range:
(0..9), note.
This
parameter
indicates
Corresponds
the
different
inter-frequency events
service type
defined
in protocol. One array
bit
corresponds to one event.
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Function: number of events

required to be configured for
a certain purpose of interfrequency measurement
Configuration Rule:
measurement purpose
The
paramter
setting is based
Function:
measurement
on
how
many
events
will be
quantity of the inter-frequency
used
in
inter-frequency
measurement
Function:
RLC mode
of the
handover.That
is to say,
Configuration
Rule:
measurement
report
Event
number accuracy
is defined by
measurement
Configuration
Rule:
accurate
measurement
purpose.
Taking
account
of
Cpich
of
transmit,
and
system
Function:
Adjustment
not
RSCP
beingSuggestion:
more precise
capacity
Configuration
Rule:
suggest
to
adjust
than
for inter
If
theCpich
value EcNO
is AM
RLC,
RNC
measurement
purpose
frequency
handover
can
request
UE
for
If
the parameter
value is set
evaluation,
ZTEafter
suggest
that
retransmission
to
"True",
it
means
itisreceiving
should
the error
paramter
value
"Cpich
the
SDU
label
(not
report
the
RSCP"
by measurement
default
.
continuous).
result based If
onthe
thevalue is
UM
RLC, the
retransmission
Function:
report
rules of the
measurement
quantity
is
not
required.Signalling
inter-frequency
measurement
pathloss. If the parameteris
more
AM system
mode
Configuration
value important.
is set to Rule:
"False",
it
can provide
the reliable
capacity
means
it doesn't
report the
transmission
ofresult
signalling.
Event
Reporting
Criteria:
UEon
measurement
based
Function:
used
to
delay
event
This
parameter
is
not
reports
thedecrease
measurement
the measurement
quantity
reporting,
average
suggested
to be
adjusted.
result
directly
after
detecting
pathloss.
handover
times
signal
change,
which
can
As
RNC can
calcuIate
Configuration
Rule:
average
Function:
used
to delay
event
respond
the
signal
change
Pathloss
by
Cpich
RSCP,
handover
times,
handover
reporting,
decrease
average
quickly
, and
only result
in few
(Pathloss=transmit
powersuccess
rate
handover
times
signalling
to
reduce
system
Cpich
RSCP),
if
Cpich
RSCP
For 2B/2C, theRule:
smaller
the
Configuration
average
load.
is
reported,
this
parameter
is,
theparameter
larger
handover
times,
handover
Periodical
Reporting
can
set "False",
and interifCriteria:
Cpich
probability
to trigger
success
rate
can
respond
the
signal
RSCP
is
not
reported,
the
frequency
handover.
Function:
used
to
delay
event
For
2D, quickly,
the bigger
this
change
butset
consume
parameter
should
"True".
For
2E,
the
smaller
the
reporting,
decrease
average
parameter
is, resource.
the easier is to
more
system
parameter
is,
theand
larger
handover
times
avoid
trigger
this
event;
otherwise,
Adjustment
Suggestion:
This
probability
tothis
activate
intererror
handover.
the
smaller
parameter
is,
parameter
is
not
suggested
RAT
measurement.easier
is to
Configuration
Rule:
average
the
harder
is
to
trigger
this
be
adjusted.
to
trigger
this
event.
handover
times,
handover
event.
When
event
is
eaiser
success
rate,
UE
For 2F, the biggermoving
thisto be
triggered,
average
handover
speed
and
handover
area.
parameter is, the harder
is to
Function:
weight
when
times
and
handover
success
The
bigger
this
parameter
is,
trigger this event; otherwise,
eveluating
cell's
quality
of is,
rate
increase,
system
the
is
tobut
trigger
the
the longer
smaller
this
parameter
non-used
frequency
resources
will
consumed
event.
Consequently,
average
the easier
is tobe
trigger
this
Configuration
Rule:
cell's and
more.
handover
times
decrease
event.
quality,
handover
success
the
riskevent
of call-drop
increase.
When
is eaiser
to be
rate
On
the
other
side,
when
this
Function:
weight
when
triggered, average handover
When
UE evaluates
signal
parameter
becomes
smaller,
eveluating
cell's
quality
of
times and
handover
success
quality,
if handover
the parameter
average
timesis
used
frequency
rate increase,
but system
smaller,
the
influence
of best
increase
result
in
Configuration
Rule:
cell's
resourcesand
willmay
be consumed
cell
of
non-used
frequency
error
handover.
quality,
more. handover success is
bigger
other
cells
Suggestion:
forofthe
scenario
rate and that
are
Asisaexpected
result,
that smaller.
handover
When
UE evaluates
signalto
handover
success
rate switch
Fucntion:
load
balance
triggered
quickly,
this
quality,
if the
parameter
is
increase.
Otherwise,
for
call
holding
procedure
parameter
be ifset
smaller,
theshould
influence
ofthe
best
parameter
is
bigger,
Related
factor:
load
small;
vice
versa.theis
cell
of and
used
frequency
influence
bestofcell
of used
distribution
among
carriers
bigger andofthat
other
cells
frequency
is As
smaller
and that
and
scenario
are
smaller.
a result,
of
other
cells
arevalue
bigger,
If
the
parameter
handover
success
rateis then
error
handover
may
"open",
RNC
performoccur.
increase.
Otherwise,
ifload
the
balance
among
different
parameter is bigger,
the
carriers
handover
influenceand
of best
cell ofusers
used
to
low
load
carrier
soand
as to
frequency is smaller
that
offer
better
Qos
the then
of other
cells
areinbigger,
process
of call holding.
If the
error handover
may occur.
parameter value is "closed", it
does not need to consider
load balance in call holding
procedure.
Fixed
No
YES
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fucntion: service balance

switch for call holding
procedure
Related factor: service
distribution among carriers
and scenario
"open",
RNC
perform
Fucntion:
CS can
balance
switch
different
services
accessing
during RAB assignment
to
differentdownlink
carriers(service
Fucntion:
available
procedure
balance)factor:
base on
operator
channelization
code
load
Related
noise
on UE
request
so
as toare
offer
better
balance
threshold
ofnoise
CS
Because
there
service.
service
when some UEs with CS
If
the parameter
value islevel
Related
factor:Qualcomm
difficulty
service
using
"closed",
it
does
need to
to
trigger
balance
chips balance
to not
other
Fucntion:
downlink
available
consider
service
balance
When
LdBalCdSwch
is in
carriers during RAB
channelization
code load
call
holding
procedure.
"open",
the
value
is
bigger,
assignment,
it
is
suggested
balance threshold of R99 PSto
then
CSparameter
traffic is easier
set this
as
service
balanced
to other
'Closed'iffactor:
there
areintera lot level
of
Related
difficulty
frequency
UTRAN
cells.
thistrigger
kind of
UEs in network.
to
balance
Otherwise,
the value is
When LdBalCdSwch
is
smaller,
CS
"open", the traffic
value is
is not
bigger,
easier
balanced
to other
then R99
PS
traffic
is easier
Fucntion:
weight
of HSDPA
inter-frequency
UTRAN
balanced
to
other
inter- cells.
throughput
When
balance
is easier
to be
frequency
UTRAN
cells.
Related
factor:
factor
result
triggered,
Ue
access
rate
is in
Otherwise,
the balance
value is switch
Fucntion:
load
unbalance
easier
toR99
fall transmitting
down
and is
callsmaller,
PS traffic
for
downlink
When
"LdBalHsSwch"
is not
drop
rate
is
easier
to
easier
balanced
to othervalue
power
opened,
the parameter
increase.
inter-frequency
UTRAN
cells.
Related
load
is
bigger,factor:
HSDPA
throughput
When
balance
isineasier
to be
distribution
among
carriers
is the key
factor
load
triggered,
Ue
access
rate
and
reasonand
whyload
loadbalance
is notis
evaluation
easier
to
fall
down
and
callbalance
based on HSDPA throughput
drop
rate
is
easier
to
If
the
parameter
value
is
is triggered easier.Otherwise,
Fucntion:
weight
of downlink
increase.
"open",
RNC
perform
the value
is
smaller,
it load
is not
transmitting
power
balance
downlink
easier tobased
triggeron
load
balance
Related
factor
result in
power
among
different
based
onfactor:
HSDPA
throughput.
Fucntion:
downlink
available
unbalance
carriers and handover users
HSDPA
throughput
threshold
When
"DlLdBalPwrSwch"
to low load
carrier so
as tois
for
load
balance
between
opened,
theservice.
parameter value
offer better
UTRAN
cells
is
bigger,
downlink
power
If the
parameter
value
is is
Related
factor:
difficulty
level
the
key
factor
in
load
"closed",
itdownlink
does notavailable
need
to
Fucntion:
to
trigger
balance
evaluation
and
load
balance
consider
load
balance
based
load
threshold
of CS
service
When
LdBalHsSwch
is open,
based
on downlink
power
is
on
downlink
transmitting
for
load
balance
between
the
value
is
bigger,
load
triggered
easier.Otherwise,
power.
UTRAN
balance
based
on HSDPA
the valuecells
is smaller,
it is not
Related
difficulty
level
throughput
is triggered
easier.
easier tofactor:
trigger
load balance
to
trigger
balance
Otherwise,
the value
is
Fucntion:
available
based on downlink
power.
When
DlLdBalPwrSwch
is
smaller,
it is notofeasier
load threshold
CS service
open,
the
value
is
bigger,
balanced
to
other
interfor load balance between load
balance
forUTRAN
CS traffic
based
frequency
cells.
RAT
systems
on
downlink
power
is level
When
balance
is
easier
to be
Related
factor:
difficulty
triggered
easier;
. Otherwise,
triggered,
Ue
access
rate
is
to
trigger
balance
Fucntion:
downlink
available
the
value
is
smaller,
CScalltraffic
easier
to
fall
down
and
When
DlLdBalPwrSwch
is
load
of R99 PS
is
notthreshold
easier
balanced
drop
rate
is
easier
to to
open,
the
value
is bigger,
service
for
load
balance
other
inter-frequency
UTRAN
increase.
inter-RATUTRAN
load balance
between
cells of CS
cells. based on downlink
traffic
Related
factor: is
difficulty
When
balance
easier level
toRAT
be
power
to overlap/Covers
to
trigger
balance
triggered,
Ue
access
rate
is
cells
isDlLdBalPwrSwch
triggered easier. is
When
easier
to fallthe
down
and
Otherwise,
value
is callopen,
the is
value
is bigger,
load
drop
rate
easier
to
smaller,
CS
trafficPS
is traffic
not
balance
for
R99
increase.
easier balanced.
based
on downlink power is
When
balance
to be
triggered
easier;is .easier
Otherwise,
triggered,
Ue
access
rate
is
the value is smaller, R99 PS
easier
to
fall
down
and
calltraffic is not easier balanced
drop
rateinter-frequency
is easier to
to other
increase.
UTRAN cells.
When balance is easier to be
triggered, Ue access rate is
easier to fall down and calldrop rate is easier to
increase.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
code between target and

source cell
Related factor: ping-pong
balance
When
LdBalCdSwch
is open,
Fucntion:
Delta threshold
of
ifHSDPA
the parameter
value
is
throughput between
bigger,
the source
load difference
target and
cell
betweenfactor:
target ping-pong
and source
Related
cell
is bigger,
balance
load
balance
to neighboring
When
LDBALHSSWCH
Fucntion:
Delta harder;
thresholdisof
cell
is
triggered
open,
if
the
parameter
value
TCP
load between
target
and
otherwise,
theload
parameter
is
bigger,
the
difference
source
cell
value
is smaller,
loadsource
balance
between
target ping-pong
and
Related
factor:
to neighboring
cell is easier.
cell
is
bigger,
balance
When
balancetoisneighboring
easier to be
load
balance
When
DlLdBalPwrSwch
Fucntion:
Delta
threshold
triggered,
Ue
access
rateisof
is
cell
is triggered
harder;
open,
if
the
parameter
value
uplink
RTWP
between
target
easier
to
fall
down
and
callotherwise,
theload
parameter
is
bigger,
the
difference
and
source
drop
rate
is cell
easier
to balance
value
is
smaller,
load
between
target
and
source
Related
factor:
ping-pong
increase.
to neighboring
cell
is bigger, cell is easier.
balance
When
balancetoisneighboring
easier to be
load
balance
When
UlLdBalPwrSwch
triggered,
Ue
access
rateisis
cell
is triggered
harder;
open,
if
the
parameter
easier
to fall
down
and value
callotherwise,
the
parameter
Fucntion:
load
balance
switch
is
bigger,
the
load
difference
drop
rate
is
easier
to
value
is
smaller,
load
balance
for
initial
RRC
procedure
between
target and source
increase.
to neighboring
Related
factor: cell
loadis easier.
cell
is bigger,
When
balance
easier
to be
distribution
among
carriers
load balance
toisneighboring
triggered,
Ue
access
rate
and
scenario
cell is
triggered harder; is
easier
to fall
down
andiscallIf
the
parameter
value
otherwise,
the
parameter
Fucntion:
service
balance
drop
rate
is
easier
to
"Inter-frequency
Open",
RNC
value isfor
smaller,
load balance
switch
initial RRC
increase.
perform
load
balance
among
to neighboring cell is easier.
procedure
different
carriersis
and
When
balance
easier to be
Related
factor:
service
handover
users
to
load
triggered,
Ue
access
rate
is
distribution among low
carriers
carrier
sofall
as down
tobalance
offer
better
Fucntion:
load
switch
easier
to
and
calland
scenario
service
in is
the
process
for
downlink
channellization
drop
rate
easier
to of
If
the
parameter
value
is RRC
connnection.
code
resource
increase.
"open",
RNC can perform
If
the parameter
value
is
Related
factor:
load
different
services
accessing
"closed",
it
does
not
need
to
distribution
among
carriers
into different carriers(service
consider
load
balance
in
the
and
reason
why
load
is
not
balance) base on operator
process
of RRC
balance
request so
as to connnection.
offer better
If
the parameter
is
service.
Fucntion:
weight value
of downlink
"open",
RNC perform
If the parameter
valueload
is
channellization
code
balance
based
on
code
"closed",factor:
it doesfactor
not
need
Related
resulttoin
resource
among balance
different in
consider service
unbalance
carriers
and
handover
Fucntion:
load
balance
switch
initial
RRC
procedure.
When "LdBalCdSwch" users
is
to
low
load
carrier
so
as
to
for
HSPA
throughput
opened, the parameter value
offer
better
service.
Related
factor:
load
is
bigger,
code
is
the key
If
the parameter
value
is and
distribution
among
carriers
factor
in load
evaluation
"closed",
it
does
not
need
and
loadon
is code
notto
load reason
balancewhy
based
consider
load
balance
based
balance
resource isload
triggered
Fucntion:
balance switch
on
code
resource.
If
the
parameter
value
is
easier.Otherwise,
the value
is
for
RAB
assignment
"open",
RNC
perform
load
smaller, it is not easier to
procedure
balance
based
on HSPA
trigger
balance
based on
Relatedload
factor:
load
throughput
among
different
code
resource.
carriers
and handover users
and
scenario
Fucntion:
service
balance
to
low
load
carrier
so as
If
the parameter
value
is to
switch
for
RAB
assignment
offer
better
service.
"open",
RNC perform load
procedure
If
the parameter
value is
balance
amongservice
different
Related
factor:
"closed",
it
does
not need
to
carriers
andamong
handover
users
distribution
carriers
consider
load
balance
based
to
low
load
carrier
so
as
to
and
scenario
on
HSPA
throughput.
offer
service
in the
If the better
parameter
value
is
process
of
RAB
assignment.
"open", RNC can perform
If
the parameter
is
different
servicesvalue
accessing
"closed",
it
does
not
need
to different carriers(serviceto
consider load
in RAB
balance)
basebalance
on operator
assignment.
request so as to offer better
service.
"closed", it does not need to
consider service balance in
RAB assignment procedure.
Fixed
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
for uplink RTWP

Related factor: load
and reason why load is not
balance
"open", RNC perform load
balance based on RTWP
Fucntion:
weightcarriers
of uplinkand
among different
RTWP
handover users to low load
Related
result in
carrier sofactor:
as to factor
offer better
Fucntion:
uplink
available
unbalance
service.
load
ofvalue
CS service
When
"UlLdBalPwrSwch"
If thethreshold
parameter
is is
for
load
balance
between
opened,
parameter
value
"closed", itthe
does
not need
to
UTRAN
is
bigger,cells
RTWP
is the based
key
consider
load
balance
Related
difficulty
level
factor
in factor:
load
evaluation
and
Fucntion:
uplink
available
on uplink
RTWP.
to
trigger
balance
balance
based
on
load
threshold
of
CS
service
Suggestion: Closed. Load
When
RTWP
isbalance
for
loadUlLdBalPwrSwch
betweenis
balance
istriggered
not accurate
open,
the
value
is
bigger,
load
easier.Otherwise,
the
value
is
different
systems
because RAT
of singal
fluctuation
balance
for
CS
traffic
based
smaller,
is notdifficulty
easier tolevel
Related
of RTWPitfactor:
on
uplink
power
is triggered
trigger
load
balance
based on
to trigger
balance
easier.
Otherwise,
the
value
Fucntion:
uplink
available
RTWP.
When UlLdBalPwrSwch
is
is smaller,
CS traffic
isPS
not
load
threshold
ofisR99
open,
the value
bigger,
easier
balanced
to otherof CS
service
forload
loadbalance
balance
inter-RAT
inter-frequency
UTRAN
cells.
between
UTRAN
cells power
traffic based on uplink
When
balance
is
easier
to beis
Related
factor:
difficulty
level
to overlap/Covers RAT cells
triggered,
Ue
access
rate
is
to
trigger
balance
triggered easier. Otherwise,
easier
to
fall
down
and
callWhen
UlLdBalPwrSwch
is
the value is smaller, CS traffic
drop
easier
to to load
open,
the is
value
is bigger,
is notrate
easier
balanced
increase.
balance
for
R99 PS of
traffic
other overlap/Covers
RAT
Fucntion:
threshold
DC
based
cells. on uplink power is
redirection
triggered
easier.is
Otherwise,
When balance
easier level
to be
Related
factor:
difficulty
the
value
is
smaller,
triggered,
Ue accessR99
ratePS
is
to
trigger redirection
traffic
istonot
balanced
easier
falltoeasier
down
and
It is harder
trigger
DCcallto
other
drop
rateinter-frequency
is
easierthis
toofvalue
redirection
when
Fucntion:
threshold
DC is
UTRAN
cells.
increase.
bigger;
otherwise,
it
is easier
redirection
When
balance
is easier to
be
to
trigger
DC redirection
when
Related
factor:
difficulty
level
triggered,
Ue
access
rate
is
this
valueredirection
is smaller
to
trigger
easier
to fall downisand
callWhen
redirection
easier
It
is harder
to
trigger
DC to
Fucntion:
HSPA+
capability
drop
rate
is
easier
to
be
triggered,
Ue access
rateis
redirection
when
value
balance
switch
forthis
calland
holding
increase.
is easierotherwise,
to fall down
bigger;
it
is
easier
procedure
waiting-time
access when
to
triggerfactor:
DCto
redirection
Related
cell HSPA+
increases.
this
value and
is smaller
capability
UE distribution
When
is each
easier to
Fucntion:
priority of
amongredirection
carriers
be
triggered,
Ue
access
rate
HSPA+
capability
Each switch has a
is easierfactor:
to fall HSPA+
down
and
Related
importance
corresponding
waiting-time
toHSPA+
access
order
of each
capability.
If one
switch is
increases.
capability
"on", its corresponding
Each
bitcapability
indicates balance
the priority
HSPA+
of
the
corresponding
bit of
works during call holding
Fucntion:
indicates
HSPA+
HSPAPLUSCAPIND.The
procedure. Otherwise, its
capability
value
is bigger,
thedoes not
capability
balance
Related
factor:
HSPA+
corresponding
work during
callHSPA+
holdingpriority
capability
which cell could
is
higher; otherwise,
the value
procedure.
support
is
smaller,
the
corresponding
Fucntion: HSPA+ capability
This
parameter
indicates
HSPA+
priority
lower.
balance
switch is
for
RAB
what
HSPA+procedure
capability
Suggestion:
when
one are
assignment
included
and each
HSPA+ capability
more
Related
factor:
cellisbit
HSPA+
corresponds
to
one
HSPA+
important,and
its priority
can be
capability
UE
distribution
capability.
If new HSPA+
set
bigger.
among
carriers
capability
is added,
Each switch
has a new bit is
used.
corresponding
HSPA+
This
parameter
not is
capability.
If oneisswitch
suggested
to
be
adjusted.
"on", its corresponding
HSPA+ capability balance
works during RAB
assignment procedure.
Otherwise, its capability
balance does not work during
RAB assignment procedure.
Fixed-keep
monitoring
No
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fucntion: dual carrier balance

switch for initial RRC
procedure
Related factor: cell DC
capability
and UE distribution
Function: indicates
the
among
carriers
number of resource blocks
During
initialthe
RRC
over which
UE procedure,
could
dual
carrier
balance
function
measure in each EUTRAN
works
if
this
switch
is
on.The
centre frequency
UE with DC
capability
Related
factor:
This can be
balanced
cell supports
parametertoisthe
configured
DC
and
enjoy
better
service.
according to operator's
Dual
carrier
balance
frequency resources function
and the
does
not workofif EUTRAN
this switch is
configuration
off.
network. downlink E-UTRA
Fucntion:
This
parameter
bigger, the
Absolute
Radio is
Frequency
EUTRAN
bandwith
Channel Number which UE
can
measure
isThe for
Fucntion:
threshold
cellof
Related
factor:
value
more.Otherwise,
this
reselection
to
a
higher
priority
this parameter is determined
parameter
isresources
smaller, the
EUTRAN
cell
by operator
and
EUTRAN
bandwith
is less.
Related
factor:
difficulty
level
network
planning.
Function: indicates
the
to triggerofreselection
number
neighbor EUTRA
This
parameter
is bigger,
centre
frequencies
reselection
to
higher
priority
Related factor: The value
of
EUTRAN
cell
is
harder.Otherwise,
this
by operator's EUTRA
parameter
is
smaller,
frequency resources and
reselection to of
higher
priority
configuration
EUTRA
Fucntion:
threshold
for cell
EUTRAN
cell
is easier.
network.
reselection to a lower priority
This
parameter
EUTRAN
cell is bigger, the
number
of
EUTRA
centre
Related factor:
difficulty
level
frequencies
is
to trigger reselection
more.Otherwise,
This
parameter
isthis
bigger,
Fucntion:
absolute
parameter
istosmaller,
the
reselection
lower
priority
reselection
priority of
number
of
EUTRA
centre
EUTRAN
cell is
EUTRAN
frequencies
is less.
harder.Otherwise,
Related factor: UEthis
camping
parameter
is smaller,
This parameter
is smaller, the
reselection
to lower priority
priority
is lower.Otherwise,
Fucntion:
threshold
for cell
EUTRAN
cell
is easier.
this
parameter
bigger,
the
reselection to aishigher
priority
priority
is
higher.
GERAN cell
If
UE is expected
to camp
on
Related
factor: difficulty
level
some
frequency/RAT,
the
prioirty
of this frequency/RAT
This
parameter
is bigger,
Fucntion:
for cell
can
be setthreshold
bigger.
reselection
to
higher
reselection to a lowerpriority
priority
GERAN
GERAN cell
cell is
harder.Otherwise,
this level
Related factor: difficulty
parameter
is
smaller,
reselection
to higher
priority
This
parameter
is bigger,
GERAN
cell
easier.
Fucntion:
absolute
reselection
toislower
priority
reselection
of GERAN
GERAN cellpriority
is
Related
factor: UEthis
camping
harder.Otherwise,
This
parameter
is
smaller,
the
parameter is smaller,
priority
is
lower.Otherwise,
reselection to lower priority
this
parameter
is bigger, the
GERAN
cell is easier.
Fucntion:
frequency band the
priority is higher.
BCCH
GSM
cell uses
If UE isARFCN
expected
to camp
on
Related
factor: The value
some frequency/RAT,
the of
this
parameter
is determined
prioirty
of this frequency/RAT
by
GSM resource.
canoperator's
be set bigger.
Which frequency band the
GSM resource belongs to,
the value of this parameter is
configured as the same
value.
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Function: indicates the

number of GSM frequency
groups
Fucntion:
minimum
Related factor:
The required
value of
quality
level
of
UTRAN
interthis parameter is determined
frequency
cell
for
reselection
by operator's GSM frequency
Related
factor:
the coverage
resources
and configuration
of
inter-frequency cell
of UTRAN
GSM network.
with
priorities
This absolute
parameter
is bigger, the
This
parameter
bigger, the
number
of GSMisfrequency
CPICH
EcNo
coverage
of cell
groups is more.Otherwise,
is
smaller
and
UE
is
harder
to
this parameter is smaller, the
camp
onofthis
cell.frequency
Otherwise,
number
GSM
Fucntion:
minimum
required
this
parameter
is smaller,
the
groups
is less.
received
power
level
of of cell
CPICH EcNo coverage
EUTRAN
cell for and
reselection
becomes bigger
UE is
Related
coverage
easier tofactor:
camp the
on this
cell,
of
absolute
butEUTRAN
UE mightcell
notwith
receive
priorities
system information
Fucntion:
minimum correctly
required
This
parameter
bigger,
on this
cell.
received
power is
level
of the
RSRP
coverage
of
cell
Suggestion:
The
default
value
UTRAN inter-frequencyiscell
smaller
and
UE
is
harder
to
is
recommended.
for reselection
camp onfactor:
this cell.
Related
theOther
coverage
of
UTRANminimum
inter-frequency
cell
Fucntion:
required
with
absolute
priorities
received power level of
This
parameter
bigger, the
GERAN
cell for is
reselection
CPICH
RSCP
coverage
of
Related factor: the coverage
cellGERAN
is smaller
i
of
celland
withUE
absolute
priorities
Fucntion: absolute priority of
This
parameter
is bigger, the
serving
cell
coverage
of
cell
is smaller
Related factor: UE
camping
and
UE
is
harder
camp on
This parameter is to
smaller,
the
this cell.isOtherwise,
t
priority
lower.Otherwise,
this
parameter
bigger, the
Function:
CpichisRSCP
priority
is
higher.
threshold to trigger
If
UE is expected to camp on
measurement
some
frequency/RAT,
thelevel
Related
factor: difficulty
prioirty
of measurement
this freq
to
trigger
This
parameter
bigger, it is
Function:
Cpich is
EcNo
easier
for
UE
to
measure
threshold to trigger
other
frequencies with equal
measurement
or
lower
priority,difficulty
or otherlevel
Related factor:
system
lower priority. Oth
to
triggerwith
measurement
This parameter is bigger, it is
easier for UE to measure
other
frequencies
equal
Fucntion:
Starting with
absolute
or
lower
priority,
or
other
radio frequency channel
system with
lower
priority. Oth
number
of GSM
cell
Related
factor:
The
value of
Fucntion: serving cell
this
parameter
is
determined
threshold for absolute
by
operator's
GSM resources.
priorities
cell reselection
Related factor: difficulty level
to
trigger reselection
Fucntion:
threshold for cell
This
parameter
bigger,
it is
reselection
to a is
higher
priority
easier
for
UE
to
reselect
to
UTRAN cell
other
frequencies
with equal
Related
factor: difficulty
level
or
lower
priority,
or
other
system
w
This
parameter
is bigger,
reselection to higher priority
UTRAN cell is
harder.Otherwise, this
UTRAN cell is easier.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Function: indicates the

number of neighbor EUTRA
centre frequencies
Related factor: The value of
Fucntion:
threshold
for cell
by operator's
EUTRA
reselection
to
an
equal
or
frequency resources and
lower
priority
UTRAN
cell
configuration of EUTRA
Related
network.factor: difficulty level
to
trigger
reselection
This
parameter
is bigger, the
This
parameter
is bigger,
number
of EUTRA
centre f
Fucntion:
reselectionabsolute
to equal or lower
reselection
priority
priority UTRAN
cellofisUTRAN
Related
factor: UEthis
camping
harder.Otherwise,
This
parameter
is
smaller,
the
priority
is
lower.Otherwise,
reselection to equal or lower
this
parameter
bigger,
the
priority
UTRANiscell
is easier.
priority is higher.
If UE is expected
to camp
on
Fucntion:
the downlink
carrier
some
thecell
centralfrequency/RAT,
frequency of the
prioirty
this frequency/RAT
Relatedoffactor:
The value of
can
be
set
bigger.
this parameter
is determined
by
operator
UTRAN
Function:
used
to indicate
resources and event
network
measurement
planning.
Configuration Rule: 3GPP
Function:
definition number of events
required
to be configured
This parameter
indicates for
a
certain
purpose
of inter-rat
inter-rat events defined
in
measurement
protocol. One array bit
Configuration
corresponds toRule:
one event.
Function:
L3 filtering
on the
measurement
purpose
measurement
results is based
The paramter setting
Configuration
Rule: signal
on how many events
will be
quality
used invariation,
inter-rat
Function:
L3 filtering
on the
measurement
timeliness
handover.That
is to say,
measurement
results
If
the
value
is
bigger,
this by
Event number is defined
This
value
is
the
experience
measurement
has
less
of
manyonvendors
and
impact
final
inter-rat
Adjustment
Suggestion:
not
operators.
It
can
guarantees
measurement
results.
suggest to adjust
the
filtering
and
Otherwise,
the valus
Function:
L3ifresults
filtering
onisthe
reflects
the
measurement
smaller,
this
measurement
measurement results
results
in time.
Function:
used
delay event
has more
impact.
This
value
is thetoexperience
If
the
value
is
bigger,
thisThis
reporting,
decrease
Adjustment
suggestion:
of
many
vendors
andaverage
measurement
has
less
handover
avoid to
parametertimes
notand
suggested
operators.
Itis can
guarantees
impact
on final
inter-rat
error
handover
be adjusted.
the
filtering
results
and
measurement
results.
Configuration
Rule:
average
reflects the
measurement
Function:
configuration
index
Otherwise,
if
the
valus
is
handover
times,
handover
results
in time.
of
the inter-RAT
smaller,
this
success
rate,
UE
moving
If
the value
ismeasurement
bigger,
this
measurement
parameters
has
more
impact.
speed
and
handover
area
measurement
has
less
Configuration Rule: It is
Adjustment
suggestion:
This
The
bigger
this
parameter
is,
impact
on final
inter-rat
configured
by
network
parameter
is
not
suggested
to
the
less
possibility
is
to
trigger
measurement
results.
planner
according
to the
be
adjusted.
this
event.
Consequently,
Otherwise,
if the valus is
network
condition.
average
handover
times
smaller,
measurement
In
order this
to
facilitate
decrease
and
the
risk
of callhas
more
impact.
maintenance and the version
drop
increase.
On
the
other
Adjustment
suggestion:
This
upgrade, the criterion is
side,
when is
this
parameter
parameter
not
suggested to
suggested
as
follows:
becomes
smaller, the more
be adjusted.
possibility
is to trigger this
event,
average
handover
00+Y*10+Z
times
increase
and
-X value range: (0,may
1),
result in errorquantity
handover
measurment
is Cpich
Adjustment
for
EcNo, X is 0;Suggestion:
measurment
the
scenario
that
handover
quantity is Cpich RSCP, X is 1
area
is small
or UE
moves
-Y value
range:
(0..9),
For
fast,
this
parameter
should be
set
small.
, Y is
0; other value is used
service type
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Function: purpose and

functions of inter-rat
measurement index
Configuration Rule:
Each inter-rat measurement
Function:
index has measurement
a function note. If
quantity
the inter-rat
different of
indexes
have the
measurement
same function, they have the
Configuration
Rule:
same
new added
Invalidnote.Any
parameter
measurement
accuracy
index should
have
a function
Function:
report
amounts
in
Taking
of Cpich
note. account
periodical
reporting
RSCP
being more
Configuration
Rule:precise
than
Cpich
EcNO
inter rat
handover successfor
rate
handover
evaluation,
ZTEthe
The parameter is bigger,
suggest
that
the
paramter
Invalid
parameter
result is handover judgment is
value precise
is "Cpich
RSCP"
byin
Function:
Report
interval
more
and
handover
default
periodical
reporting
success. rate
increase, but
Configuration
Rule:
system resource
is consumed
Function:
report
rules
of the
handover
successThe
rate
more.Otherwise,
inter-rat
measurement
If
this parameter
is bigger,
parameter
is smaller,
theevent
Configuration
Rule:
system
Function:
used
topossibility
delay
report
is
slower,
events'
reports
are
less,
theof
capacity
reporting,
decrease average
call-drop
increases,
and
risk
of
call
drop
increase
Event
Criteria:
UE
For
notReporting
3B/3C/3D
but 3A and
is
handover
times
handover
success
rate falls
then
handover
success
rate
reports the
measurement
adopted
in inter-RAT
Configuration
Rule:
average
down.
Otherwise,
this
may
decrease.
result
directly
detecting
handover,
the after
paramter
is
handover
times,
handover
paramter
is
smaller,
report
signal
change,
which
can is
invalid
for
3B/3C/3D.
success
rate
frequent
and
handover
respond
the
signal
change
Function:
used
to to
delay
event
It
is morerate
difficult
trigger
3A
success
increases,
butfew
quickly
,
and
only
result
in
reporting,
decrease
average
ifmore
the paramter
is
smaller.
system
resources
are
signalling
to
reduce
system
handover
times
When
event
is eaiser
to be
taken
up.
load.
Configuration
Rule:handover
average
triggered,
average
Periodical
Reporting
Criteria:
handover
handover
times and times,
handover
success
can
respond
the
signal
success
rate
rate increase,
system
Function:
usedbut
to delay
event
change
quickly,
It
is more
difficult
to consume
trigger 3C
resources
will bebut
consumed
reporting,
decrease
average
system
resource.
ifmore
the paramter
isand
larger.
more.
handover
times
avoid
Adjustment
Suggestion:
Event
3B/3D
is
not
used This
in
Adjustment
suggestion:
error
handover.
parameter
is
not
suggested
current
system,
so
the
In
order
to
avoid
system
Configuration Rule: averageto
be
adjusted.
parameter
value
of 3B/3D is
capacity
loss
by activating
handover
times,
handover
invalid.
compressed
when
success
rate mode,
and handover
When
event is
eaiser
be
compressed
mode
forto
interarea.
triggered,
average
handover
Function:
weight
when
RAT bigger
measurement
is
The
this parameter
is,
times
and ithandover
success
eveluating
cell's
quality
of
activated,
istoexpected
to
the longer
is
trigger
the
rate
increase,
but
system
used
frequency
handover
to 2G
quickly.
So
event.
Consequently,
average
resources
will is
beconfigured
consumed
Configuration
Rule:
signal and
the threshold
to
handover
times
decrease
more.
quality,
success
a larger
value.
the
risk handover
of
call-drop
increase.
Adjustment
rate
On the othersuggestion:
side, when this
In
order
to evaluates
avoid
system
When
UE
signal
parameter
becomes
smaller,
Function:
AMR
intercapacity
loss
by
activating
quality,
if
the
parameter
average handover timesis
frequency
handover
switch
compressed
mode,
when
smaller,
influence
of best
increasethe
and
may result
in
Related
factor:
compressed
mode for intercell
ofhandover.
used frequency
is
error
The
parameter
"ON"
to
RAT
measurement
is
bigger
and that
of
other
cells
Suggestion:
for is
the
scenario
provide
service
continuity
activated,
it
is
expected
toand
are
smaller.
As
a
result,
that handover is expected
to
better
quality
of
service.
to
2G
quickly.
So
handover
success
rate
triggered
quickly,
this
Function:
AMRis inter-rat
In
Multi-carriers
scenario,
the
threshold
configured
increase.
Otherwise,
theif to
parameter
should
be ifset
handover
switch
AMR
inter-freqency
handover
a
smaller
value.
parameter
is
bigger,
the
small;
and
vice versa.
Related
factor:
is
not expected,
influence
of bestthe
cell of used
The
parameter
is "ON"
tothat
parameter
is smaller
"Off"
to and
simplify
frequency
is
provide
continuity
and
multi-carriers
strategy,
of other service
cells are
bigger, then
better
quality
of
service.
decrease
opportunity
of
error handover
may occur.
In
Multi-system
scenario,
if
compressed
mode
activation
AMR
inter-rat
handover
and reduce
influence
onis not
expected,
the parameter is
system capacity.
"Off" to simplify multi-carriers
strategy, decrease
opportunity of compressed
mode activation and reduce
influence on system capacity.
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
Yes
N/A
Function: HSDPA interfrequency handover switch

Related factor:
The parameter is "ON" to
provide service continuity and
better quality of service.
Function:
HSDPA
inter-rat if
In Multi-carriers
scenario,
handover
switch
HSDPA inter-freqency
Related
handoverfactor:
is not expected, the
The
parameter
is "ON"
to
parameter
is "Off"
to simplify
provide
service
continuity and
multi-carriers
strategy,
Function:
HSUPA
interbetter
quality
of service.
decrease
opportunity
of
frequency
handover
switch
In
Multi-system
scenario,
if
compressed mode activation
Related
factor:
HSDPA
inter-rat
handover
and reduce
influence
on is
The
parameter
is "ON"
to
not
expected,
the
parameter
system
capacity.
provide
service
continuity
is "Off" to simplify multi- and
better
of service.
carriersquality
strategy,
decrease
Function:
HSUPA
inter-rat if
In
Multi-carriers
scenario,
opportunity
of compressed
handover
switch
HSUPA
inter-freqency
Related
handover
is not
expected,
the
influencefactor:
on
system
capacity.
The
parameter
is "ON"
to
parameter
is "Off"
to simplify
provide
service
continuity and
multi-carriers
strategy,
Function:
R99
RT
interbetter
quality
of
service.
decrease opportunity
of
frequency
handover
switch
In
Multi-system
scenario,
if
Related
factor:
HSUPA
inter-rat
handover
and reduce
influence
on is
The
parameter
is "ON"
to
not
expected,
the
parameter
system
capacity.
provide
service
continuity
better
of service.
carriersquality
strategy,
decrease
Function:
R99
RT
inter-ratif
In
Multi-carriers
scenario,
opportunity
of compressed
handover
switch
R99
RT
inter-freqency
Related
handover
is not
expected,
the
influencefactor:
on
system
capacity.
The
parameter
is "ON"
to
parameter
is "Off"
to simplify
provide
service
continuity and
multi-carriers
strategy,
Function:
R99
NRT
interbetter
quality
of
service.
of
frequency
handover
switch
In
Multi-system
scenario,
if
Related
factor:
R99
RT inter-rat
handover
and reduce
influence
on is
The
parameter
is "ON"
to
not
expected,
the
parameter
system
capacity.
provide
service
continuity
better
quality
service.
carriers
strategy,
decrease
Function:
R99ofNRT
inter-rat
In
Multi-carriers
scenario, if
opportunity
of compressed
handover
switch
R99
inter-freqency
modeNRT
activation
and reduce
Related
factor:
handover
is not
influence
on
system
capacity.
The
parameter
isexpected,
"ON"
to the
parameter
is
"Off"
to
simplify
provide service continuity and
multi-carriers
strategy,
better quality of
service.
decrease
opportunity
of if
In Multi-system scenario,
compressed
mode
activation
Function:
Carrier
R99
NRT Dual
inter-rat
handover
and
influence
on
Redirection
Strategy
is notreduce
expected,
the Switch.
system
capacity.
Configuration
Rule:to simplify
parameter is "Off"
To
turn onprohibition
thestrategy,
function, UE
multi-carriers
Function:
can
be
redirected
to adjacent
of
handover
timer after
inter-rat
cell
that
support
DC-HSDPA,
compressed
mode activation
handover
failure
itand
canreduce
provide
better
user
influence
on
Configuration
Rule: system
experience.
system
capacity.
resource
To
turn
off thehandover
function, UE
After
inter-rat
is
Function:
which service
can't
be
redirected
to is
failure,
if
the
parameter
handover
strategy
will be DCadjacent
cell
that support
larger,
next
handover
interval
used
for
multi-RAB
HSDPA.
is
longer,
which
may
increase
Configuration Rule:
call-drop
possibility
This parameter
setsduing
valueto
qulity
bad.
basedgetting
on service
If
the parameter is smaller,
requirement.
next
handoverthe
interval
is
For example,
service
shorter
and
handover
attempt
handover value of a service is
is
more frequent,
whichand
will
"should
be performed"
occupy more
system
another
is "should
not be
resource.
performed", if the parameter
sets as "0", then RNC will
perform based on the value
"should be performed" in
multi-RAB.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
Yes
If some venders don't support

inter-frequency and inter-rat
compressed
mode
Function: AMR
service
simultaneously
configuration
handover strategy
via
IUR,
the
value
1,
Configuration Rule:isservice
otherwise
planning the value is 0.
Function:
compressed
mode
If service is
not expected
to
configuration
strategy
IUR
handover to GSM,
the via
value
Configuration
Rule:
is "shall not be perfromed";
compatibility
else if serviceofisequipment
expected to
vendor
handover to GSM as soon as
If
the parameter
is "0",
RNC
possible,
the value
is "should
will
configure two
types of the
be performed",
otherwise,
accompanying
value is "shouldcompressed
not be
mode(inter-frequency
and
performed".
Function:
CS64
service
inter-RAT).If
SRNC
and
handover
strategyto ZTE, this
DRNC all belong
Configuration
Rule:beservice
parameter should
set "0".
planning
If the parameter
is service
"1", RNC
Function:
PS NRT
Because
GSM
doesn't
will
configure
only
one type of
handover
strategy
support
CS64,
if
CS
64 cann't
accompanying
compressed
Configuration Rule: service
fall
back CS12.2, this or intermode(inter-frequency
planning
Function:
service
handover
parameter
should
be
set to
RAT)
based
on the
specific
If
service
is
not
expected
stategy
controlled
by
RNC
or
"shall
not
be
performed".
value
of IfOrRatHoSwch.
handover
to GSM,
the value
Function:
PS
RT service
CN
When
to other
is
"shallDRNC
not
bebelong
perfromed";
handover
strategy
Configuration
Rule:
serviceto
equipment,
this
parameter
else
if
service
is
expected
planning
could
be set
"0". as soon as
handover
to GSM
planning
If
the parameter
sets
"0",
possible,
the
value
is as
"should
If
service
is not
expected
to
RNC
will
ignore
"service
be
performed",
otherwise,
the
handover
to
GSM,
the
value
handover"
IE in requested
value
is
"should
not
be
is
"shall
not
be perfromed";
RAB,
and
perform
strategy
performed".
else
if
service
is expected
according to the
value of to
AmrServHoStra/CS64ServHo
possible,
the
value is "should
Function:
inter-frequency
Stra/PsRtServHoStra/PsNrtS
be
performed",
otherwise, the
measurement
timer
ervHoStra;
value
is
"should
be
Configuration
Rule:
If the parameter not
setsservice
as "1"
performed".
performance
and "service handover" is not
When
IFORRATHOSWCH
included
in requested RAB,is
"3",
thealso
parameter
RNCIf will
performvalue is
smaller,
RNC
will
stop intercorresponding
service
Function:
inter-frequency
frequency
measurement
handover strategy
according
measurement
indicator
inand
start
inter-handover
easily.
to the value of
CELL_FACH
Adjustmeng
suggestion:
Configuration
Rule:
For
some
scenario,
UEtocann't
Function:
inter-rat
If the parameter is set
"0",
report
inter-frequency,
then
measurement
indicator
in
ervHoStra,
otherwise
RNC
UE doesn't perform FDD
this
parameter
should
be set
CELL_FACH
will perform
strategy
based
inter-frequency
measurement
suitable
value,
which
Configuration
onCELL_FACH
the value
ofRule:
"service
in
state,can
and
handover
UE
to requested
GSM
and
If
the parameter
is set
to "0",
handover"
IE
in
reselection
doesn't
occur.
avoid
call
drop.
UE
doesn't
perform
FDD
RAB.
For
multi-carrier scenario,
inter-rat
measurement
in
some UMTS
carrier is used
CELL_FACH
state,
and
for hot spot coverage, this
reselection
doesn'tbe
occur.
parameter should
set as
For
multi-carrier
scenario,
"1".
Function: broadcast in SIB 11
some
UMTS carrier is used
or SIB12
for
hot
spot coverage
If
the parameter
set asand cell
Configuration
Rule:
reselection
to
GSM
"True",
cell
reselection
based
If the parameter is set to
"0",
neighboring
cells
will
be
on
absolute
priority
is
used.
SIB11 is broadcast in SIB11.
expected
in
CELL_FACH,
this
Function:
absolute
priority
cell
If the parameter
is set
to "1",
parameter
should
as
reselection
switch be
SIB12
is broadcast
inset
SIB11,
"1".
Configuration
Rule:
which is not used
in current
If
the parameter is set to "0",
system.
cell reselection based on
absolute priority is not used.
If the parameter is set to "1",
cell reselection based on
absolute priority is used. In
cell reselction from UMTS to
LTE scenario, this parameter
must be set"1".
Network
Planing&Optimi No
zation
N/A
Fixed
No
Yes
Fixed
No
Yes
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
level is controlled by adjusting

the parameter.
Configuration Rule: handover
difficult level, handover
timeliness
Function:
detected
set is
If the parameter
value
handover
switch will be
smaller, handover
Configuration
Rule: the
UE
triggered easierly.If
mobility
contiuity,
drop
parameter
value iscall
larger,
possibility
handover will be triggered
Function:
DTCP
handover
If
the parameter
is
set to "0",
harderly.
For
different
switch
handover
based
on
detected
neighboring cells, Different
Configuration
Rule:
system
set
could
be
triggered.
value
will not
be set
to
reflect
performance
When
neighboring
handover
tendency.cells
If
the parameter
set may
to For
"0",
exceeds
32,Suggestion:
call is
drop
be
Adjustment
handover
based
on
DTCP
is
happened,
as
neighboring
not
used.
cells
is varys
cuttedquickly,
out. this
quality
If
the
set
to
If
the parameter
parameter
isbe
setset
to "1",
"1",
parameter
shouldis
handover
based
on
DTCP
is
handover
based on
detected
small to proctect
handover
used.
For
some
scenario,
the
set
could be triggered to
timeliness.
DTCP
reaches
the maximum
provide
UE
mobility
Function:
HCS
priority
power
and
signal
quality
continuity.
Configuration Rule:
UE is
bad, the speed
paramter will set
mobility
"True"
to performvalue
handover
If the parameter
is
for
improving
system
smaller, the priority of the
performance.
UMTS cell is lower.
In
handover
UEgeneral,
will reselection
to based
the
event
2D
can
fullfill
thelow
quality
higher priority cells in
Function:
handover
judement
requirement,
so
this
mobility state
and
reselection
event
for inter-frequency
parameter
should
setin"0".
to th lower
priority be
cells
handover
Invalid
parameter,
Only
event
high mobility state.
Configuration
Rule:
algorithm is supported.
Function:
judgementintra-frquency
accuracy
measurement
quantity,
used
The inter-frequency
handover
for
judgement
canhandover
be triggered
by event 2A,
Configuration
Rule:2C.
intraevent 2B or event
Event
frquency
interference,
2A means change of best
measurement
accuracy
frequency is more
precise
Taking
account
of Cpich
than event 2B/2C.
EcNo
being
more precise
In some
scenario,
interthan
Cpichhandover
RSCP forisintrafrequency
frequency
handover
expected to
perform quickly,
evaluation
, Cpich
EcNo
this parameter
should
beisset
suggested
in
intra-frequency
"event
2c".
Function:
in general.inter-frquency/interrat
Formeasurement
some special quantity,
scenario, if
used
handover
judgement
Cpichfor
RSCP
can evaluate
Invalid
parameter,
Only event
Configuration
Rule:
signal
variation
more precise,
algorithm
is supported.
measurement
accuracy
then the parameter
will be set
Taking
account
as Cpich
RSCP.of Cpich
EcNo being more precise
than Cpich RSCP for intrafrequency handover
Fucntion:
trafficis
evaluationpreferred
, Cpich EcNo
Function:
event
type
suggestedinter-rat
in intra-frequency
choice
Each
bit indicates one traffic.
in general.
Configuration
Rule:
Every
bit can
be
used
For some
scenario,
Cpich
measurement
accuracy
independently
or
RSCP is good but Cpich
Event
3abad,
means
combinded.If
the that
bit
isthe
"1",
EcNo is
this
parameter
estimated
quality
of
the
this
traffic
to be
should
be is
setprior
"Cpich
RSCP
currently
UTRAN
absorbed
on
this
cell.
and Cpichused
EcNo".
frequency
certain
Otherwise,isit below
is "0", athis
traffic
threshold
and the
is not expected
to estimated
be
quality
of the
other system is
accessed
on thi
above a certain threshold,
which is include event 3B and
3C, so event 3A is suggested
for most of scenairos.
For some scenario, if the
inter-rat handover is expected
to triggered quickly, event 3C
will be used due to the trigger
condition can be fullfilled
easily than event 3A.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi Yes
zation
Yes
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed
No
N/A
Fixed-keep
monitoring
No
Yes
Network
Planing&Optimi No
zation
N/A
Function: cell scenario type

Configuration
Rule:
network
Function: service
handover
planning
indicator
Related factor:
The parameter is "ON" to
control service allocation in
UMTS or GSM.For example,
AMR is in GSM and PS data
service is in UMTS.
If the parameter is "Off",
service handover stategy
doesn'tparameter,
perform. Only event
Invalid
algorithm is supported.
Function: index of the interfrequency measurement
type
Configuration Rule:
This
parameter
Function:
index is
of configured
the intraby
network
planner
according
to
the
network
condition.
type
Configuration
Rule:
Function: uplink
Bler
This parameter
handover
switchis configured
Function:
of the
interby networkindex
planner
according
Configuration
Rule:
system
rat
measurement
parameters
to the network condition.
performance
based
on traffic type
If the parameter
is set to "0",
Configuration
Rule:
handover
based
on uplink
Function:
uplinkispower
This
parameter
Bler is
notswitch
used. configured
handover
bythe
network
planner
according
If
parameter
is set
to "1",
Configuration
Rule:
system
to
the network
condition.
handover
based
on
uplink
performance
Bler
used. For is
some
If theisparameter
set to "0",
scenario,
the
uplink
power
handover based on uplink
reaches
the
maximum
and
power is not used.
Bler
bad yet. the
paramter
If
theisparameter
is set
to "1",
will
set "True"
to perform
handover
based
on uplink
handover
for
improving
power is used. For some
system
performance.
scenario,
the uplink power
In
general,
based
reaches thehandover
maximum.
The
event 2D can
fullfill
the quality
Function:
HCS
function
paramter
will
set
"True"
to
requirement,
so this
switch
perform handover
for
parameter
could
be
set "0".
Configuration
Rule:
avoiding great
interference
Function:
priority
of interIf
the
parameter
value
is
for other users
and improving
frquency
and inter-RAT
"True",
HCS
will
be
used
and
Function:
Handover difficult
system performance.
handover
H
criterion
will
be
fufilled
in
level
is
controlled
by
adjusting
In general, handover
based
Configuration
Rule: network
process
cellfullfill
reselection.In
the
parameter.
event
2Dofcan
the quality
planning
general,
HCSso
is this
not handover
used.
Configuration
Rule:
requirement,
If only inter-frequency
difficult
level,
handover
parameter
be setthis
"0".
handover
iscould
expected,
timeliness
parameter is "1".
If
value is is
If the
onlyparameter
inter-rat handover
smaller,
will be is
expected,handover
this parameter
triggered
easierly.If
the
"2".
parameter
value
is
larger,
If inter-frequency handover is
handover
willpriority,
be triggered
expected in
this
harderly.
different
parameterFor
is "3".
neighboring cells, Different
value will be set to reflect
handover tendency.
Adjustment Suggestion: For
quality varys quickly, this
small to proctect handover
timeliness.
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
N/A
No
Function: neighboring UMTS

cells priority
Configuration Rule: network
planning including
UMTS
Function:
cell reselection
cells'location,
penalty time UMTS cell's
signaling
quality
etc..cell
Configuration
Rule:
If
the
parameter
value
is
reselection difficult
level
smaller,
the
neighboring
The greater this parameter is,
UMTS
cells'
prority
is higher.
the more
difficult
cell
Function:
quality
threshold
Function:
cell reselection
reselection
will
be
triggered,
level
in HCS
penalty
time
and
vice versa.Rule:
Configuration
Configuration
Rule: cell
cell
Adjustment
Suggestion:
reselection
level
reselection difficult
difficult
level In
general,
thisis
parameter
will is,
When
HCS
used,
if the
The greater
this
parameter
not
be
adjusted,
because
parameter
value
is
smaller,
H
the more difficult
cell
Function:
quality threshold
Qoffset
can
be
used
to
criterion
will
fulfilled
reselection
will
be
triggered,
level in HCS
control
tendency
of cell
easierly
and
cell
reselection
and
vicethe
versa.
Configuration
Rule:
cell
reselection
more
precisely.
will
be triggered
easierly;
Adjustment
Suggestion:
reselection
difficult
level Inand
ifWhen
the parameter
value
iswill
general,
thisisparameter
HCS
used,
if the
bigger,
H
criterion
will
be
not
be adjusted,
parameter
value because
is
smaller, H
Function:
quality
threshold
fulfilled
harderly
and
cell
Qoffset
can
be
used
to
criterion
will
fulfilled
level
in HCSwill be triggered
reselection
control
the
tendency
of cell
easierly
and
cell
reselection
Configuration
Rule:
cell
harderly.Different
value
can
reselection
more
precisely.
will be triggered
easierly;
reselection
difficult
level and
configured
byvalue
different
ifbe
the
parameter
is
When
HCS is
used,
if thewill
neighboring
cells,
which
bigger,
H criterion
will
be H
parameter
value
is
smaller,
Function:
quality
threshold
reflect
the
different
fulfilled
harderly
and
cell
criterion
willtendency
be fulfilled
level
in HCS
reselection
of
reselection
will
bereselection
triggered
easierly
and
cell
Configuration
Rule:
cell
neighboring
cells.
harderly.Different
value can
will
be triggered
easierly;
reselection
difficult
level Inand
Adjustment
Suggestion:
configured
byvalue
different
ifbe
the
parameter
iswill
When
HCS
is
used,
if the
general,
this
parameter
neighboring
cells, which
will
bigger,
H
criterion
will
be
parameter
value because
is smaller, H
not
be the
adjusted,
reflect
different
fulfilled
harderly
and cell
criterion
willtendency
fulfilled
Qoffset
can
be used
to
reselection
of
reselection
will
be
triggered
easierly
and
cell
reselection
control
the
tendency
of cell
neighboring
cells.
harderly.Different
value can
will
be triggered
easierly;
reselection
more
precisely.
Adjustment
Suggestion:
Inand
configured
byvalue
different
Function:
quality
offset
ifbe
the
parameter
isof
general,
this
parameter
will
neighboring
cells,
cells which
bigger,
H criterion
will bewill
not
be the
adjusted,
because
reflect
different
Configuration
Rule:
fulfilled
harderly
andcell
cell
Qoffset
candifficult
be used
to
tendency
of cell
reselection
level,
reselection
will
be
triggered
control
the
tendency
of of
cell
Function:
quality
offset
neighboring
cells.
reselection
tendency
harderly.Different
value can
reselection
more
precisely.
neighboring
cells
Adjustment
Suggestion:
If
parameter
is In
bethe
configured
byvalue
different
Configuration
Rule:
cell will
general,
this cells,
parameter
smaller,
cell
reselection
neighboring
which
will
reselection
difficult
level,
not
be the
adjusted,
because
be
triggered
easierly;
andcell
if
reflect
different
reselection
Qoffset
cantendency
bevalue
used is
to
the
parameter
reselection
tendency
ofbigger,
If
thereselection
parameter
value
control
the tendency
cell
will
beofiscell
neighboring
cells.
smaller,
cell
reselection
reselection
more
precisely.
triggered
harderly.Different
Adjustment Suggestion: will
In
be
triggered
value
canthis
beeasierly;
configured
byif
Function:
quality
offsetand
of
general,
parameter
will
the
parameter
value
is
bigger,
different
neighboring
cells,
neighboring
cellsbecause
not be adjusted,
cell
reselection
will
which
will
reflect
thebe
different
Configuration
cell
Qoffset
can
beRule:
used
to
triggered
reselection
tendency
ofof
difficult
level,
cell
control
theharderly.Different
tendency
of
cell
Function:
quality
offset
value
can
be
configured
by
neighboring
cells.
more
precisely.
neighboring
cells
different
neighboring
cells,
If
the parameter
value
is
Configuration
Rule:
cell
which
will
reflect
the
different
smaller,
cell
reselection
will
reselection
difficult
level,
cell
reselection
tendency
of
be
triggered
easierly;
and
if
reselection
tendency
neighboring
cells.
the
parameter
value
is
bigger,
If
the parameter
value is SIB
Adjustment
Suggestion:
cell
reselection
will be will
smaller,
cell
reselection
12 is not used,
so this
triggered
harderly.Different
be
triggered
easierly;
parameter
will
not be andbyif
value
can
be
configured
the
parameter value is bigger,
adjusted.
different
neighboring
cell reselection
will becells,
which
will
reflect
the different
triggered harderly.Different
reselection
tendency
of by
value can be configured
neighboring
cells.
different
neighboring
cells,
which will reflect the different
reselection tendency of
neighboring cells.
Adjustment Suggestion: SIB
12 is not used, so this
parameter will not be
adjusted.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
system information block

length is limited, SBI11bits is
introduced, if the number of
neighboring cells exceed the
limit of SIB11, then SIB11bits
will be used.
Configuration Rule:
Function:
neighboring
UMTS
neighboring
cells number,
cells
state cells priority
neighboring
Configuration
Rule:
network
If
this Parameter
is "0",
the in
Function:
temporary
offset
planning
neighboring
cells will be
cell
reselection
If
only cell reselection
to
broadcasted
inRule:
SIB11.
Configuration
cell
UMTS
cell
is
expected,
this
If this Parameter
is level,
"1", the
reselection
difficult
cell
parameter
could
be
set
neighboringtendency
cells will be"IDLE
reselection
STATE".
broadcasted
in SIB11bits.
The
greater
this
parameter
is,
Function:
temporary
offset in
If
cell
reselection
and
When
neighboring
cells
the more
difficult cell
cell
reselection
handover
UMTS
are
exceed
thetowill
limition,
the
reselection
be Cell
Configuration
Rule:
cell
expected,
this
parameter
parameter
will
be
set
"0"
for
triggered.Different
value
reselection
level, can
cell
could
be setdifficult
"IDLE
high
priority
neighboring
cells.
be
configured
by
different
reselection
tendency
STATE+DCH
STATE".
neighboring
cells,
which willis,
The
greater
this
parameter
Function:
temporary
offset in
reflect
the
different
the more
difficult cell
cell
reselection
reselection will
tendency
of
reselection
be cell
Configuration
Rule:
neighboring
cells.
triggered.Different
value
can
reselection
difficult
level,In
cell
Adjustment
Suggestion:
be
configured
by
different
reselection
tendency
general,
this cells,
parameter
neighboring
whichwill
willis,
The
greater
this parameter
Function:
temporary
offset in
not
be
adjusted,
because
reflect
the
different
the
more
difficult
cell to
cell
reselection
Qoffset
can
be used
reselection
tendency
of
reselection
will
be cell
Configuration
Rule:
control
the
tendency
of cell
neighboring
cells. value
triggered.Different
can
reselection
difficult
level,In
cell
more
precisely.
Adjustment
Suggestion:
be
configured
by
different
reselection
tendency
general,
this cells,
parameter
neighboring
whichwill
willis,
The
greater
this parameter
not
be
adjusted,
because
reflect
the
different
the
morecan
difficult
cell to
Qoffset
be used
reselection
tendency
of
reselection
will
be of
control
the
tendency
neighboring
cells. valuecell
triggered.Different
can
reselection
more
precisely.
Adjustment
Suggestion:
be configured
by differentIn
general,
this cells,
parameter
neighboring
whichwill
will
not
be
adjusted,
because
Qoffset
can
be function
used to
Function:
HCS
reselection
tendency
of
control
the tendency
of cell
switch
neighboring
cells.
reselection
precisely.
Configuration
Rule:
Adjustment more
Suggestion:
In
If
the
parameter
value
general, this parameteriswill
"True",
HCS will be
used and
not be adjusted,
because
H
criterion
will
be
fufilled
in
Qoffset
can
be
used toSwitch
unction:
load
balance
process
of
cell
reselection.In
control
the
tendency
of
cell
based
onHCS
bandwidth
general,
is not
used.
reselection
more
precisely.
Related factor:
load
Function:
load
balance
Switch
based
onload
CE resource
and
reason
why
is notof
Fucntion:
Delta
threshold
balance
HSUPA throughput between
If
the parameter
target
and sourcevalue
cell is
"open", RNC
perform
load
Related
factor:
ping-pong
balance
balance based on bandwidth
among
different carriers and
When LDBALHSSWCH
is
balance
users
to low load
open, if the
parameter
value
carrier
so the
as to
offer
better
is bigger,
load
difference
service.
between target
source
Fucntion:
weightand
of HSUPA
If theisparameter
value
is
cell
bigger,
throughput
"closed",
it does
not need to
load
balance
to
neighboring
Related
factor:
factor result
in
consider
load balance
cell
is triggered
harder;based
unbalance
on
bandwidth.
otherwise,
the parameter
When
"LdBalHsSwch"
is
Suggestion:
Closed.
value
is
smaller,
load balance
opened, the parameter
value
to bigger,
neighboring
cellthroughput
is easier.
is
HSUPA
When
balance
is the key
factorisineasier
load to be
triggered,
Ue
access
rate is
evaluation and load balance
easier
to
fall
down
and
callbased on HSUPA throughput
drop
rate
is
easier
to
is triggered easier.Otherwise,
increase.
the value is smaller, it is not
easier to trigger load balance
based on HSUPA throughput.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fucntion: downlink available

HSUPA throughput threshold
for load balance between
UTRAN cells
to trigger balance
When LdBalHsSwch is open,
the value is bigger, load
Function:
User Number
balance based
on HSUPA
Offset
of
UTRAN
for Balance
throughput is triggered
easier.
Related
factor:
balance
Otherwise, the value is
tendency
smaller, it when
is not UTRNA
easier
neighboring
cell, GSM
balanced to other
interFunction:
Number
neighboring
cells
incells.
MultifrequencyUser
UTRAN
Offset
of GSMand
in
Mode
common
When system
balance
is Multi-Mode
easier
to be
System
forUe
Balance
GSM
neighboring
cells
exist
triggered,
access
rate
is
Related
balance
simultaneously.
easier tofactor:
fall down
and calltendency
when
UTRNA
The
the
value
droplarger
rate is
easier
to is, the
neighboring
cell,
GSM
easier
neighboring
cell of
Function:
User Number
increase.
neighboring
cells
inBalance
MultiUTRANofwill
be
balanced.
Offset
GSM
for
Mode
system
and
common
Suggestion:
depend
on
Related factor: balance
GSM
neighboring
cells
balance
tendency
tendency when UTRNAexist
simultaneously.
neighboring
cell, GSM
The
larger the
value
is, the
neighboring
cells
in Multieasier
neighboring
cell
of
Mode system and common
GSM
will
be
balanced.
GSM neighboring cells exist
Suggestion:
depend
Function:
GSM
cells'on
carrier
simultaneously.
balance
tendency
number.
Related
factor:
balance
Function:
service
handover
easier neighboring
cell of
distribution
carriers
stategy
by
RNC or
GSM willcontrolled
beamong
balanced.
and
scenariodepend on
CN
Suggestion:
The
greater
this
parameter
Configuration
Rule:
service is,
balance
tendency
Function:
equivalent
the larger capacity
of HSPA
GSM
planning
users.
will
beparameter
triggered and
If
the
setsload
as "0",
Related
Priority
balance
to
GSMBasic
will be
RNC
willfactor:
ignore
"service
The
greater
this
parameter
triggered easierly.
handover"
IE in requested is,
the
more
load
resource
will
RAB, and perform
strategy
be
considerated
to
be
according to the value of
occupied.RNC will chose cell
of
largest remained load
resource
to access.
ervHoStra;
Function: AMR service
If
the parameter
sets as "1"
handover
strategy
and
"service
handover"
is not
included in requested RAB,
planning
RNC
will also
If service
is notperform
expected to
corresponding
service
handover to GSM,
the value
handover
strategy
according
is "shall not
be perfromed";
to
theif value
of is expected to
else
service
Function:
CS64
service
handover
to
GSM as soon as
handover
strategy
possible,
the value
"should
Configuration
Rule:isservice
ervHoStra,
otherwise
RNCthe
be
performed",
otherwise,
planning
Function:
PS
RT
service
will
perform
strategy
based
value
is "should
not be
Because
GSM
handover
strategy
on
the value
of doesn't
"service
performed".
support
CS64,
ifrequested
CSservice
64 cann't
Configuration
Rule:
handover"
IE in
fall
back
CS12.2,
this
planning
RAB.
parameter
be set to
If service isshould
not expected
"shall
not
be
performed".
handover
to GSM,
the value
Function: PS
NRT service
is
"shall
not
be
perfromed";
handover strategy
else
if service Rule:
is expected
Configuration
serviceto
handover
planning to GSM as soon as
possible,
value
is "should
If service the
is not
expected
to
be
performed",
otherwise,
the
handover to GSM, the value
value
is
"should
not
be
is "shall not be perfromed";
performed".
else if service is expected to
possible, the value is "should
be performed", otherwise, the
value is "should not be
performed".
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
N/A
No
Function: Switch for PS

Handover with LTE
Related factor: the actual net
planning
whether RNC
support
PS
Function:
RNC
SRVCC
handover
with LTE
Switch
planning
The
parameter
indicates
Function:
R99 RT
Inter
whether RNC support
Rat(EUTRAN)
Handover
SRVCC.
Switch
planning
This
parameter
indicates
Function:
R99 NRT
Inter
whether R99 RT
inter-Rat
Rat(EUTRAN)
Handover
handover
to EUTRAN
Switch
allowed
or
not. the actual net
Related factor:
planning
Function:
HSDPA
Inter
whether R99
NRT inter-Rat
Rat(EUTRAN)
Handover
handover to EUTRAN
Switch
allowed or not.
planning
Function:
HSUPA
Inter
This parameter
indicates
Rat(EUTRAN)
Handover
whether HSDPA
inter-Rat
Switch
handover to EUTRAN
Related
factor:
allowed or
not. the actual net
planning
This
parameter
indicates
Function:
Choice
Strategy in
whether HSUPA
inter-Rat
Multi-RAT
Handover
handover
to EUTRAN
Related factor:
the actual net
allowed
or
planning not.
Function:
Threshold
of
which inter-RAT
will be
Adding
New
Radio
Link
chosen in priority for
Based
OninEc/N0
In Soft
handover
multi-RAT
Handover
scenario.
planning
Function:
Threshold
If the parameter
valueofis
Adding
Newradiolink
Radio Link
larger, new
will be
Based
On RSCPhardly,
In Softand
add in activeset
Handover
vice versa.
planning
Function:
UTRAN
Cellisof
If the parameter
value
Multi-Mode
System Indicator
larger, new radiolink
will be
Related
factor: the
actual
net
add in activeset
hardly,
and
planning
vice versa.
The
parameter
indicates
Function:
Adding
New Radio
whether
the
neighboring
Link Judgement Switch
UTRAN
belongs
to MultiRelated cell
factor:
the actual
net
Mode
System.
planning
When radio link with bad
signal quality can be added in
activeset, this parameter is
set 1 to improve soft
hanodver success rate.
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Function: Low RTWP Load

Threshold of a cell
distribution
ZTE defines private interface
to exchange load information
in
Multi-mode
system.There
Function:
medium
RTWP
are
three
load
low
Load Thresholdstates:
of a cell
load,
medium
load,
high
load.
When
the
RTWP
payload
of
distribution
Function:
Highthan
RTWP
Load
a
cell
is
lower
the
value
ZTE defines
private
interface
Threshold
of the
a cell
indicated
by
parameter,
it
to
exchange
load
information
Related
factor:
load
means
the RTWP
load state
in
Multi-mode
system.There
distribution
of
the
cellload
is low.The
are
three
states:interface
low
ZTE
defines
parameter
is private
greater,
then
the
load,
medium
load,
high
load.
to
exchange
load
information
possibility
of
low
load
state
When
the RTWP
payload ofis
in
Multi-mode
system.There
unction:
Low
TCP
Load
easier.
a cell
is lower
than
thelow
value
are
three
load
states:
Threshold
of
a
cell
indicated
by the
parameter,
it
load,
medium
load,
high
load.
Related
factor:
loadload
Suggestion:
default
value
is
means
the
RTWP
state
If
the RTWP payload of a cell
distribution
recommended
of
the cell
is medium.The
is
lower
than
the value
ZTE
defines
private
interface
parameter
is the
greater,
then
the
indicated
by
parameter,
it
Function:
Medium
TCP
Load
to
exchange
load
information
possibility
of
medium
load
means
the of
RTWP
Threshold
asystem.There
cellload state
in
Multi-mode
state
iscell
easier.
of
is high.If
Related
factor:
loadthelow
arethe
three
load
states:
payload
of
a
cell
is greater
distribution
load, medium load,
high load.
Function:
high
TCP
Load
than
the
value
indicated
bya
ZTE
defines
private
interface
When the TCP payload
of
Threshold
of
a
cell
the
parameter,
the
RTWP
to
exchange
load
information
cell is lower than the value
Related
factor:
load
load
state
of the
the
cell is
in
Multi-mode
system.There
indicated
by
parameter,
it
distribution
overload.The
parameter
are
three
lowis of
means
theload
TCPstates:
load state
ZTE
defines
private
interface
greater,
then
the
possibility
of
load,
medium
load,
high
load.
the cell
is
low.The
parameter
to
exchange
load
information
high
load
state
is
easier.
When
the
TCP
payload
of
a
is greater, then the possibility
in
system.There
cell
is lower
than
the
value
of Multi-mode
low
load state
is
easier.
are
three load
states:
low it
indicated
by
the
parameter,
Function:
Low
Code
payload
load,
medium
load.
means
the of
TCP
loadhigh
state
Threshold
aload,
cell
Suggestion:
default
value
isof
If
the
TCP
payload
of
a
cell
is
the
cell
is
medium.The
Related
factor:
load
recommended
Function:
medium
Code
lower
than
the
value
indicated
parameter
is greater,
then
distribution
payload
Threshold
a cellthe
by
the
parameter,
itofmeans
possibility
of
medium
load
ZTE
defines
private
interface
Related
factor:
loadof the cell
the
TCP
loadload
state
state
is easier.
to exchange
information
distribution
is high.If
the payload
of a cell
in
Multi-mode
system.There
ZTE
defines
private
interface
is
greater
than
the value
Suggestion:
default
value
are
three
load
states:
low is
to
exchange
loadparameter,
information
indicated
by the
recommended
load,
medium
load,
high
load.
in
Multi-mode
system.There
the
TCPload
state
of the of
cell
When
the
Code
payload
are
three load states:
low isa
is
overload.The
parameter
cell
ismedium
lower than
thehigh
value
load,
load,
load.
Function:
Low
CE
payload
greater,
then
the
possibility
of
indicated
by
the
parameter,
When
the
Code
payload
of ait
Threshold
of
a
cell
high
load
state
is
easier.
means
the
Code
load
state
cell
is lower
than
the value of
Related
factor:
load
the
cell
is
low.The
parameterit
indicated
by default
the parameter,
distribution
Suggestion:
value is
Function:
medium
CE
is
greater,
then
the
possibility
means
the Code
load
state of
ZTE
defines
private
interface
recommended
payload
Threshold
a cell
of
low
load
state is of
easier.
the
cell
is
medium.If
the
to exchange
load
information
Related
factor:
load
occupied
codesystem.There
resource
is
in
Multi-mode
distribution
Suggestion:
default
value is
greater
than
the
value
are
three
loadprivate
states:interface
low
ZTE
defines
recommended
indicated
by this
parameter,
it
load,
medium
load,
high
load.
to
exchange
load
information
means
that
the
code
resource
When
the CE payload
of a
in
Multi-mode
system.There
load
state
is than
high.The
cell
is
lower
the
value
are
three load
states:
low
Function:
Low
HSDPA
user
parameter
is the
greater,
then
the
indicated
by
parameter,
it
load,
medium
load,
high
load.
number
Threshold
of
a
cell
possibility
of
medium
load
means
the
CE
load
state
of
When
CE payload
of a
Related
load
state
isthe
easier.
the
cell
isfactor:
low.The
parameter
cell
is
lower
than
the
value
distribution
is
greater,by
then
the
possibility
indicated
the
parameter,
ZTE
defines
private
interface
Suggestion:
default
value
is it
of
low
load
state
is
easier.
means
the
CE
load
state
of
to
exchange load information
recommended
the
cell is medium.If
the CE is
in
Multi-mode
system.There
Suggestion:
default
value is
greater
than
the
value
are
three load states: low
recommended
indicated
by this
parameter,
it
load, medium
load,
high load.
means
that
the
CE
resource
When the HSDPA user
load
state
is high.The
number
payload
of a cell is
parameter
then the
lower
than is
thegreater,
value indicated
possibility
of medium
load
by the parameter,
it means
state
is
easier.
the HSDPA user number load
Suggestion:
default
value is
state of the cell
is low.The
recommended
parameter is greater, then the
possibility of low load state is
easier.
Suggestion: default value is
recommended
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
distribution
ZTE defines private interface
to exchange load information
in Multi-mode system.There
are
three load
Function:
Lowstates:
HSUPAlow
user
load,
medium
load,
load.
number Threshold ofhigh
a cell
When
the
HSDPA
user
Related
factor:
loadHSUPA
Function:
medium
number payload
of a cell is
distribution
user
number
Threshold
of a
lower
than the
valueinterface
indicated
ZTE
defines
private
cell
by
the parameter,
it means
to
exchange
load
information
Related
factor:
load
the
HSDPA
user
number
load
in
Multi-mode system.There
distribution
state
of
the
cell
is
medium.If
are
three
loadprivate
states:interface
low
ZTE
defines
the
HSDPA
user
number
is
load,
medium
load,
high load.
to
exchange
load
information
greaterthe
than
the value
When
HSUPA
user
in
Multi-mode
system.There
indicated
by this
parameter,
number
payload
of a cell
is it
are
three
load
states:
low
Function:
Low
MBMS
user
means
that
the
HSDPA
user
lower
than theload,
valuehigh
indicated
load,
medium
load.
number
Threshold
ofmeans
a cell
load state itis
high.The
by
the
parameter,
When
the
HSUPA
user
Related
factor:
load
parameter
isuser
greater,
thenload
the
the
HSUPA
number
number
payload
of
a cell
is
distribution
possibility
of
medium
load
Function:
medium
MBMS
state of
thethe
cellvalue
is low.The
lower
than
indicated
ZTE
interface
statedefines
is
easier.
user
number
Threshold
of the
a
parameter
is private
greater,
then
by
the
parameter,
it
means
to
exchange
load
information
Suggestion:
default
value
isis
cell
possibility
of
low
load
state
the
HSUPA user
number load
in
Multi-mode
system.There
recommended
Related
factor:
load
easier.
state
of
the
cell
is
medium.If
are
three load
states:
low is
distribution
Suggestion:
default
value
the
HSUPA
user
number
is
load,
medium
load,
high
load.
ZTE
defines
private
interface
recommended
greaterthe
than
the value
When
MBMS
user
to
exchange
loadparameter,
information
indicated
by this
number
payload
of a cell is it
in
Multi-mode
system.There
means
thatthe
thevalue
HSUPA
user
lower
than
indicated
are
three
load
states:
low
Function:
Low
signal
user
number
load
state
is
high.The
by
themedium
parameter,
means
load,
load,itofhigh
load.
number
Threshold
a cell
parameter
is
greater,
then
the
the
MBMS
user
number
load
When
the
MBMS
user
Related
factor:
load
possibility
of
medium
load
state of the
cell isoflow.The
number
payload
a cell is
distribution
state is easier.
parameter
is
greater,
then the
lower
than
the
value
indicated
ZTE
defines
private
interface
Suggestion:
default
value
possibility
of
low
load
stateisis
by
the parameter,
it means
to
exchange
load
information
recommended
ZTE
definesuser
private
interface
easier.
the
MBMS
number
load
in
Multi-mode
system.There
to
exchange
load
information
Suggestion:
default
value
is
state
of
the
cell
is
medium.If
are
three load system.There
states: low
in
Multi-mode
recommended
the MBMS
user
number
is
load,
medium
load,
high
are
three
load
states:
lowload.
greater
than
the
value
When
the
signal
user
number
load,
medium
load, high load.
indicated
it
payload
ofby
a this
cell parameter,
is lower
than
When
the
signal
user
number
means
that
the
MBMS
user
the
valueofindicated
by thethan
Function:
scene
parameter
payload
a cell
is
lower
number
load
state
is
high.The
parameter,
it
means
the
for
handover/reselection
the
value indicated
by
the the
parameter
is
greater,
then
signal user
number
load
state
Related
factor:
the actual
parameter,
it
means
the
possibility
of low.The
medium load
of
the cell
is
scence
signal
user
number
load
state
state
is easier.
parameter
greater, then
of the cell isismedium.If
the the
possibility
ofnumber
low load
state
is
If
the cell
belongs
toisoutdoor
signal
user
greater
easier.
scene,
this
parameter
is
0;
If
theparameter,
cell belongs
to high-that
this
it means
mobility
outdoor
scene,
this
the
signal
user
number
load
Function: Cell Radius Scene
parameter
is
1;
state
is
high.The
parameter
Related factor: the actual cellis
If
the cellthen
belongs
to indoor of
greater,
the possibility
radius
Function:
scene
parameter
scene
,
this
parameter
is 2;
medium
load state is easier.
for
If
the
cell
belongs
to
subway/
0:
[0-5]km
Related
factor:this
theparameter
actual
tunnel
scene,
1:
[5-10]km
scence
is
2: 3;
[10-40]km
3:
[40-140]km
If
the
cell belongs
to outdoor
Function:
scene parameter
4:
[140-200]km
scene,
this
parameter
is 0;
for
5:
[200Infinity]km
If
the
cell
belongs
to
highRelated factor: the actual
mobility
scence outdoor scene, this
parameter is 1;
If
If the
the cell
cell belongs
belongs to
to indoor
outdoor
scene
,
this
parameter
2;
scene, this parameter isis0;
If
the
cell
belongs
to
subway/
If the cell belongs to hightunnel
thisscene,
parameter
mobilityscene,
outdoor
this
is
3;
parameter is 1;
If the cell belongs to indoor
scene , this parameter is 2;
If the cell belongs to subway/
tunnel scene, this parameter
is 3;
Function: scene parameter

for handover/reselection
Related factor: the actual
scence
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
Yes
Fixed
No
Yes
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
If the cell belongs to outdoor

scene, this parameter is 0;
If the cell belongs to highmobility outdoor scene, this
parameter is 1;
If the cell belongs to indoor
Function:
EUTRAN
scene , thisDownlink
parameter
is 2;
Absolute
Frequency
If the cell Radio
belongs
to subway/
Channel
Number
tunnel scene,
this parameter
Related
factor:
the actual
is 3;
scence
Function: Uplink EUTRAN
Absolute Radio Frequency
Channel Number
Related
the actual
Fucntion:factor:
Inter-Frequency
scence Switch Based on
Balance
Measurement
Fucntion:
Inter-Frequency
Related
coverage of
Function:factor:
EUTRAN
Balance
Switch
Based on
neighboring
cell
Measurement
Bandwidth
Measurement
with
If
this switch
is on,
Related
factor:
the actual
Overlapping
or Covering
neighboring
cells
with
scence
Relation
"neighbor" or "contained in"
Related
factor:
success rate
relation use
measurementof
blindbalance;
HO based
balance
based
neighboring
If
RabMeaBalStaSwch
cells with "Overlap" or and
CoverMeaBalSwch
arealso
on,
"Covers" relation may
Fucntion:
User
Number
measurement-based
balance
use measurement-basedwith
Compressed
will
be performed
forActivation
balance
only ifMode
for
Balance
Strategy
neighboring
cells with
CoverMeaBalSwch
isBased
on too.
On
Measurement
overlapping
or
covering
If the switch is off, only blind
Related
factor:
cell's
relation;
otherwise,
blind HO
handover-based
balance
will
throughput
and
load
based
balance
will
be
be performed to the
This
parameter
is with
smaller, the
performed
for
neighboring
neighboring
cells
Fucntion:
Timer
of
Deactivate
user
Number
with
cells
with overlapping
or
"Overlap"
or "Covers"
Compressed
Mode
for
compressed
mode
covering
relation. activation
relation.
Balance
Based
On
is
smallerStrategy
and the
users
can
Function:
This
parameter
Measurement-based
balance
Measurement
be
to other
cells
indicates
the the
Cpich
Ec/N0
canbalancced
improve
successful
Related
factor:
the
timeon
of
are
consequently,
the
threshold
for blind
rateless;
of balance
for handover
UE
compressed
mode
active
cell's
load
decrease
slowly.
in
procedure
of service
cell's
boundary,
but the and
UE
measurement
Otherwise,
this
parameter
reconfiguration.
If reportedis
procedure is more
This
parameter
is
smaller,
the
bigger,
the
user
Number
with
Cpich
Ec/N0
of
source
cell
is
complicated
and
delay
is
Function:
This
parameter
activation
time
of
compressed
compressed
mode
activation
less
than
or
equal
to
longer
than
that
of
blind
HO
indicates
the Cpich
RSCP
mode
is
shorter
and
UE may
is
bigger,
but
which
impacts
EcNoQualThrd
or
reported
based
balance
threshold
for
blind
handover
not
finish
measurement.
cell's
throughput
and
system
Cpich
Ec/N0 is
than
or
in
procedure
of less
service
Otherwise,
this
parameter
is
performance.
equal to RscpQualThrd,
blind
reconfiguration.
If
reported
bigger, thewill
activation
time of
handover
not
be
Cpich
RSCP mode
of source
cell is
compressed
is longer
triggered.
less
than
or
equal
to
but
which impact
cell factor:
Parameter
controlling
EcNoQualThrd
or reported
throughput.
user
and
network
Fucntion:
serving
cellthan
Cpichexperience
RSCP
is less
or
feature
threshold
for
absolute
equal to RscpQualThrd, blind
When thecell
service
priorities
reselection
handover
will
not be
reconfigures
, if this
based
on RSRQ
triggered.
parameter
is
small
, UE
will
Related
factor:
difficulty
level
Parameter
controlling
factor:
blind
handover
more
easily
to
trigger
reselection
user experience and network
and
may
drop the
call. it is
This
parameter
is bigger,
feature
Oherwise
,
the
UE
easier
for
UE
to
reselect
to
When the service will blind
hanover
hard., if this
other
frequencies
with equal
reconfigures
or
lower priority,
or other
parameter
is small
, UE will
system
with lower
blind handover
more easily
priority.Otherwise,
this
and may drop the call.
parameter
is
smaller,
is
Oherwise , the UE willitblind
harder
for
UE
to
reselect
to
hanover hard.
other frequencies with equal
or lower priority, or other
system with lower priority.
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
YES
Fixed
No
N/A
Fucntion: threshold for cell

reselection to a higher priority
EUTRAN cell Based on
RSRQ
Fucntion:
threshold for cell
reselection
to anisequal
or
This parameter
bigger,
lower
priority
EUTRAN
cell
Function:
Based
on This
RSRQ
EUTRAN
cell
isparameter
indicates
the
minimum
Related
factor: difficulty
harder.Otherwise,
this level
required
of the
to
triggerquality
reselection
parameter
is smaller,
EUTRAN
cell
satisfies
This
parameter
is bigger,
reselection
to which
higher
priority
the
condition
of
being
reselection
to
equal
or
EUTRAN cell is easier.lower
selected
or reselected
priority EUTRAN
cell isby UE.
only
the measuredthis
quality of
harder.Otherwise,
the
cell
is
over
parameter Threshx,
is smaller,high2 and
Function:
QqualminEUTRA
can
cell
reselection
to equal
orthe
lower
Threshx,
low2
Configuration
be
selected.
priority
EUTRAN
cell
is
Tag.
Configuration
Rule:
cellPeriod
Function:
Modification
easier.
Related factor:
Configuration
covering
Coefficient
for MBMS.should
Rule:
Thisradius.
parameter
If
value
is
Configuration
Rule:
It needs
bethe
setparameter
according
to operator
smaller,
cell
reselection
to
consider
the
timeliness
of
network deployment.If
criteria
is
easier
fullfilled
,
and
the
information
update
and
absolute priority reselection
vice
versa.
UE's
battery
consumption.
based
on RSRQ
and RSRP
Adjustment
Suggestion:
The
value
of
this in
parameter
need to be used
acutalTheis
default
value
is
larger,
the
modification
period
network,
this
parameter
will
recommended.
for
MBMS
is longer, the
be set
True.
Parameter
Function:
ThisThe
is
timeliness
the information
Adjustmentof
Suggestion:
service
type
identification
update
is
worse.
default
value is 4A Counter
Function:
paramater.
The
valueEvent
of this parameter is
recommended.
Threshold
E-TTI
Switching
Configuration
Rule: Different
smaller, thefor
modification
from
10ms
to
2ms.
services
which
are
period for MBMS is shorter,
Configuration
Rule:
It needs
distinguished
by
traffic
class,
the
timeliness
of4A
theCounter
Function:
Event
to
consider
the
user
CN
domain update
indicator,
information
is
better
,
Threshold
for maximum
E-TTI Switching
experiences.
direction
and
bit
but
the
UE's
battery
from
10msofto
2ms.
The
value
this
parameter
is
rate
should
have
different
consumption
isRule:
also
Configuration
Itmuch
needs
larger,
it
will
be
more
difficult
service
type
identification.
more.
to
consider
user
to
trigger thethe
E-TTI
Adjustment
Suggestion:
experiences
and
the beto
conversion
from
Primary key can 10ms
not
utilization
ratio
of
radio user
2ms,
and
it
will
influence
modified.
resource.
experience;
Function:
E-TTI is
The
of
parameter
The value
valueSwitch
of this
this of
parameter
is
switching
triggered
by
user
larger,
it
will
be
more
difficult
smaller, it will be easier
to
plane
throughput
to
trigger
E-TTI
trigger
thethe
E-TTI
conversion,
measurement.
conversion
2ms
but it is alsofrom
easier
to to
result in
Configuration
Rule:
To turnthe
on
10ms,
and reconfiguration
it will
influence
ping-pong
the
function,
it
can
realize
the
utilization
ratio
of
radio
because of the throughput
dynamic
adjustment of E-TTI
resource;
fluctuation.
based
on the
userparameter
plane
The value
of this
is
throughput
measurement,
smaller, it will
be easier to
and
it can
the
trigger
the improve
E-TTI conversion,
system
capacity.
but it is also
easier
to result
Function:
This
parameter
is in
To
turn
off reconfiguration
the switch
function, it
ping-pong
the
DTX/DRX
Function:
This
can't
realize
theparameter
dynamic
because
of
the
throughput
indicating
whether
DTX/DRX
indicates
the
RV
configuration
adjustment
ofbe
E-TTI,
and it
fluctuation.
is
allowed
to
used.
selected
by
RNC
when
Ecan
reduce theRule:
timesOpen
ofthe
E-TTI
Configuration
or
DCH
Harq
Combining
reconfiguration.
close
DTX/DRX
function
Capability
IE in AUDIT
according
to
the
requirement
RESPONSE returned
by
of
the
operator.
NodeB takes the value of 'IR
and Chase Combining
Capable'.
Configuration Rule: According
to the gain comparion
between CC and IR.
It is concluded by simulation
that using IR obtains more
retransmission combination
gain than using CC.
Fixed
No
YES
Fixed
No
N/A
Fixed
No
YES
Fixed
No
YES
Fixed
No
YES
Fixed
Yes
YES
Fixed
No
N/A
Fixed
No
YES
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Function: This parameter is a

Function:
Thisindicates
parameter
switch which
indicates
the maximum
whether HS-SCCH
Lessbit
is
rate
withtoHS-SCCH
Less
allowed
be used by
thefor
Non-VoIP/AMR.
RNC.
Configuration
Configuration Rule:
Rule: According
Considering
together
cellhas
and
to whether the
operator
service
throughput,
gain
purchased
the HS-SCCH
brought
by HS-SCCH Less.
Less license.
If This parameter is set too
large, code number will
become
bottleneck
and
Function:the
This
parameter
is
tranmisssion
power
will
the DTX/DRX switch for nonincrease
so as to indicating
make the
realtime services
user throughput
andis cell
whether
DTX/DRX
allowed
Parameter Function:
Switch
troughputput
decrease.If
the
to
be
used.
for
shielding
GBR
reduction
parameter
is
too
small,
the
Configuration
Rule: According
shared
by uplink
advantage
of the and
HS-SCCH
to
actual
requirement
of the
Function:
This
parameter
is
downlink.
less
will
be
not
obvious.
operator.
HS-SCCH Less
switch
Configuration
Rule:
Thisfor
non-VoIP/AMR
services.
parameter
to consider
Parameter needs
Function:
This
Configuration
Rule:
According
the requirement
of load
parameter
indicates
the
to
the actual
requirement
of
reduce
and
affect
the
service
Function:
This
parameter
is
maximum
number
of selected
the
operator.
quality
as
little
as
possible
at
the DTX/DRX
for nonservices
whoseswitch
guaranteed
the
same
time
when
overload
realtime
services
indicating
bit
rates will
be decreased
happen.
whether
DTX/DRX
is allowed
each time
when overload
Turn
on
the
function
of GBR
to
be
used.
happens.
decrease, it might
the
According
Configuration
Rule:make
The value
online
GBR
services
to the
requirement
of
of
this actual
parameter
can make
decrease
GBR
and affect
operator.
the system
equipment
runthe
in
performance,
butquick
it can
normal state as
as
reduce
cell
loadthe
andleast
possiblethe
and
make
reduce
the
probability
of callIt
impact
to of
thethis
online
services
Function
parameter:
Function
of
this
parameter:
It
drop.
when
uplink
or
downlink
indicates
the
minimum
rate
is a timer
which
startsofafter
Turn
off
the
function
GBR
overload
happen.
threshold
of the
SCCPCH
transmission
of "rate
RRC
decrease,
after
The
larger
the
parameter
is,in
setup
for
MBMS
in order to
CONNECTION
REQUEST
decrease",
"forced
handover"
the
more
UEs
are
avoid
the
delete
and
recase
of connection
and
"forced
services
renegotiated
to
theMBMS
lowest
establish
theI/B
SCCPCH.
establishment
for
transfer
to
cell_fach
state"the
Function:
This
parameter
isofa
GBR,
and
the
more
resource
Factors
of
consideration:
reception
and stops
after
overload
control,
the
"call
switch
indicating
whether
Iub
is
released
in
this
cell,
the
number ofofcommon
transport
reception
RRCmultiplexing
drop"
is the
only
method
to
transport
bearer
more
quickly
theSETUP.
cell loadthe
channel
reconfiguration,
CONNECTION
reduce
the
load,
it
would
is
used
on
the
Iub
interface.
returns
to
normal.
But if the
utilization
of
SCCPCH.
Factors
ofthe
consideration:
the
increase
call
drop
rate.
Configuration
Rule:
According
value
is
too
big,
it
would
This
parameter
is
larger,
the
probability
of
RRC
connection
Note:
This
parameter
is
valid
to
whether
the
Node
B
select
too
many
UEs
to
more
MBMS
services
will
set
successfully,
therenegotiation
time bearer
of UE
only
when
QoS
support
Iub
transport
downgrade
rate,
it
would
up
in
one
SCCPCH.This
can
wait
to idle
mode after
RRC
function
is turned
which
multiplexing.
have
impact
to
the
avoid serious
to delete
or on
add
the
connection
request,
the
means
QosNegRenegSwi
is
online
services.
SCCPCH
frequently,
but
the
round-trip
delay between ifUE
1
or
3.
The
smaller
the
parameter
is,
property
(TTI
and
TBsize)
of
and UTRAN.
the
less
UEs
are
renegotiated
MBMS
services
are
different,
The larger this parameter is,
to
lowest
and
more
resources
can
not the
be
thethe
longer
theGBR,
UE
waits
the
less
resource
is
released
in
used
.
RRC CONNECTION SETUP
this
cell,
the
more
slowly
the
ThisMBMS
parameter
is smaller,
the
for
services,
the more
cell
load
returns
to normal.
less
MBMS
services
will set
opportunity
the
UE
can
up
in one
SCCPCH.This
can
receive
theThis
RRC
Function:
parameter
delete
or
add
the
SCCPCH
CONNECTION
SETUP,
the
indicates
the
Cell
Identity.
frequently,
but
ifbe
the
property
longer
time
will
needed
by
Configuration
Rule:
Cell
(TTI
TBsize)
of The
most
of
UE toand
enter
idlebe
mode
, the
Identity
should
configured
MBMS of
services
arebe
the same
feeling
User
according
to thewill
actural
,affected.
this will make
use
of the
configuration
of the network
resources
. this
The
smaller
parameter
is,
and
should
be
in the
If
the
MBMSthe
is unique
not waits
used,
this
the
shorter
UE
the
RNC.
parameter
is invalid SETUP
RRC CONNECTION
for MBMS services, the less
opportunity the UE can
receive the RRC
CONNECTION SETUP, the
shorter time will be needed by
UE to enter idle mode, the
ratio of RRC connect
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

Function:
This parameter
physical channel
ID of the
indicates
the number of the
PICH.
PI
(Paging Indicator)
one
Configuration
Rule: Itthat
should
PICH
radio
frame
contains.
be guaranteed that Common
Configuration
Rule:
Physical Channel
IDThe
is unique
capacity
requirement
of the
for one common
physical
paging
and
channelnofification
within a cell.
downlink power resource.
The larger Np, the lower the
repetition of each PI, and the
Function:
Thisisparameter
higher power
needed. So in
indicates
whether
UL16QAM
order to save power
this
is
open
or
closed
in
Function:
This
parameter
parameter should bethe
setRNC.
to
Configuration
Rule:length
According
indicates
the timer
the minimum
values
which
to
whether
16QAM
during
which
CQI
reportis
satisfies
theUL
paging
allowed
be used
in DTX
the
priority
istohigher
than
requirement.
Function:
This
parameter
RNC.
priority.
indicates whether UL16QAM
Configuration
Rule:
is open or closed
in the RNC.
Considering
uplink
and
Configuration Rule:power
According
the
accuracy
of
the
channel
to whetherThis
UL 16QAM
is
Function:
parameter
quality
downlink
allowedused
tothe
beby
used
inofthe
indicates
length
uplink
scheduler.
RNC.
DPCCH burst when UE
The larger
parameter
is,
enters
DTXthe
mode
controlled
the
longer
the 1.
CQI report
by UE
DTXfor
cycle
having
priorityRule:
over DTX, the
Configuration
Function:
This
parameter
larger
the
uplink
power
andthe
Considering
uplink
power,
indicates
the
length
ofthe
uplink
the
more
accurate
of
accuracy
of thewhen UE
DPCCH
burst
channel
quality
used
synchronization
of controlled
thebycurrent
enters
DTX
mode
downlink
scheduler.
channel
quality.
Function:
This
parameter
by
UE
DTX
cycle
2.
The
smaller
the
parameter
The
largerthe
the
parameter
is,is,
indicates
inactive
Configuration
Rule:
the
shorter
for
the
CQI
report
the
longerfor
it takes
the
threshold
UE transferring
Considering
uplink
the
having
priority
over power,
DTX,
the
DPCCH
to
transmit
when
UE
to
monintor
HS-SCCH
status
accuracy
of
the
less
the uplink
power
and
the
performs
radioUE
link
periodly
every
DRX
cycle
synchronization
of
the
current
less
accurate
of
the
channel
synchronization
while in DTX
subframes.
channel
quality.
quality
by
downlink
cycle
1,used
thus
the
more
Configuration
Rule:
The
larger
the
parameter
is,
scheduler.
Function:
After
UE
enters
contribution
to
the
uplink
Considering
theparameter
time
it takes
Function:
the longerThis
it takes
the
downlink
mode,
UE
power,
and
theto
better
it UE
UE
to transfer
discontinous
indicates
whether
UE
DPCCH
toDRX
transmit
when
shall
detect
HS-SCCH
in ofof
synchronizes
to
the
current
reception
and
the
accuracy
monitors
the
full
E-AGCH
performs radio link
each
number
of
subframes
channel.And
vise
versa.
judgement
that
the
the
serving
cell
when
the
start
synchronization while in DTX
indicated
byinthis
downlink
is
discontinous
of
the2,
E-AGCH
orparameter.
E-RGCH
cycle
thus
the
more
Configuration
Rule:
transmission.
transmission
with an
contribution tooverlaps
the uplink
Considering
the
frequency
The
larger
the
HS-SCCH
power, andreception
theparameter
better
it is,to
monitor
thefor
HS-SCCH
when
the
longer
UEthe
to current
monitor
subframe.
synchronizes
to
UE
is
in
downlink
HS-SCCH
continously
each
Configuration
Rule:
channel.And vise versa.
discontinous
reception
andthe
UE
DRX cycle
subframes,
Considering
demodulation
Function:
This
parameter
the
time
it
takes
UE
to
slower
forthe
UEUE
to transfer
to of1
performance
and
life-span
indicates
DTX
cycle
transfer
to continous
discontinous
reception,
the
the
battery.
for
10ms TTI. When E-DCH
reception.
more
accurately
to
judge
If
is is
set
to FALSE,
UE
TTI
10ms
and
UL
DTX that
The
larger
the
parameter,
the
the
downlink
is
in
monitors
the part
E-AGCH
mode
is active,
ifUE
UE
entersof
less
frequent
forwhen
to
discontionus
transmission.
the
serving
cell
the
start
DTX
mode
controlled
by UL
monitor
HS-SCCH
when
UE
And
versa.
of
thevise
E-AGCH
orwill
E-RGCH
DTX
mode
1,
UE
use
the
is
in
downlink
DRX,
the
transmission
overlaps
with an
value
indicated
by
this
slower
for UE
to transit to
HS-SCCH
reception
parameter
as DTX cycle
1.
continous
reception.
And
subframe.Comparing
withvise
full
Configuration
Rule:
versa.
reception of above
Considering
uplink power and
channels(when
the
the speed for UE
to parameter
transit to
is
set
to
TRUE),
the
continuous transmission.
demodulation
The larger thisperformance
parameter is,is
deceased
which
will period
make the
the longer the cycle
performance
of
uplink
when UE is in DTX cycle 1
services
using
scheduling
using
10ms
E-TTI,
the more
grant
powermethod
is saveddecrease
but whentoUE
some
the benefit is
transitsextent.But
to continous
that
UE's
battery
life willdelay
be
transmission the more
prolonged.
will be obtained. And vise
versa.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
for 2ms TTI. When E-DCH

TTI is 2ms and UL DTX mode
is
active, ifThis
UE parameter
enters DTX
Function:
mode
controlled
by UL DTX
indicates the inactivity
mode
1,
UE
will
use
value
threshold for UE DTXthe
cycle
2
indicated
by
this
parameter
for 10ms TTI. If there has no
as
cycle
1.
anyDTX
E-DCH
transmission
for
Configuration
Rule:
the
number
of
E-DCH
TTIs
Function:
This
parameter
Considering
power and
indicated
by uplink
this
parameter,
indicates
the
inactivity
the
speed
for
UE
to
transit 2to
UE
will use
UE
threshold
fortransmission.
UEDTX
DTXcycle
cycle 2
continuous
as
DTX
cycle,
i.e.
UEhas
willno
for
2ms
TTI.
If
there
The
larger
this parameter
is,
transmit
DPCCH
burst in for
any
E-DCH
transmission
the
longer
the
cycle
period
eachnumber
UE DTX
cycle
2. TTIs
the
of DTX
E-DCH
when
UE is
in
cycle
1
Configuration
Rule:
Function:
This
parameter
indicated
by
this
parameter,
using
2ms
E-TTI,
the
more
Considering
uplink
power
indicates
theUE
UEDTX
DTXcycle
cycle2 2
UE
willisuse
power
saved
butthe
when
UE
consumption
for
10ms
TTI.and
When
E-DCH
as
DTX
cycle,
i.e.
UE
will
transits
to
continous
timeliness
forand
data
TTI
is 10ms
UL
DTX
transmit
DPCCH
burst
in
transmission
theif more
delay
transmission.
mode
is
active,
UE
enters
each
UE
DTX
cycle
2.
will
bemode
obtained.
And
vise
When
using
10ms
E-TTI,
the
DTX
controlled
by UL
Configuration
Rule:
Function:
This
parameter
versa.
larger
the
parameter
is,
the
DTX
mode
2,
UE
will
use
the
Considering
uplink
power
indicates the UE DTX cycle 2
stricker
for
tobyenter
DTX
value
indicated
this
consumption
and
the
for
2ms
TTI.UE
When
E-DCH
cycle
2,
and
the
more
power
parameter
as
DTX
cycle
2.
timeliness
TTI
is 2ms for
anddata
UL DTX mode
is
consumed,
but
once
there
Configuration
Rule:
transmission.
is
active, if UE enters DTX
is
data,controlled
it can2ms
be by
send
Considering
uplink
power
and
When
using
E-TTI,
the
mode
ULout
DTX
more
immediately.
And
vice
the
accuracy
of
the
power
larger
the
parameter
is,
the
mode 2, UE will use the value
versa.
when
UE
transitting
to DTX
stricker
forby
UE
toparameter
enter
indicated
this
continuous
cycle
2, cycle
andtransmission.
the
as
DTX
2. more power
The
largerThis
thisbut
parameter
is,
is consumed,
once there
Configuration
Rule:
Function:
parameter
the
longer
the
cycle
period
is data, it the
canuplink
be DTX
send
out and
Considering
power
indicates
UE
long
when
UE is
inofDTX
cycle
2
more
immediately.
And
vice
the
accuracy
the
power
preamble
length.
When
UE
Function:
This
parameter
is
using
10ms
E-TTI,
the
more
versa.
when
UE
transitting
to
enters
DTX
status
controlled
UE
DTX/DRX
configuration
power
is
saved
but
UEis
continuous
transmission.
by
UEwhich
DTX
cycle
2,when
if there
Index
indicates
a set of
transits
to
continous
The
larger
this
parameter
is,
data
to be parameters.
transmitted on EDTX/DRX
transmission
the
lessperiod
the
longer
the
cycle
DCH,
UE
shall
transmit
Configuration
Rule: And vice
accurate
the
when
UEfirstly
is the
inpower.
DTX
2
DPCCH
indifferent
thecycle
UE sets
DTX
Numbering
versa.
using
2ms
E-TTI,
the
more
long
preamble
length
slots.
of DTX/DRX parameters of
power
is saved
but when
UE
Configuration
Rule:
the system.
Services
ofisthe
Function:
After
E-DCH
transits
to
continous
Considering
uplink
power
same
QoS
should
be
scheduled, UE shall monitor
transmission
the
less
consumption
and
whether
configured
with
the
same
the
full E-AGCH
of
the
E- the
accurate
the
power.
DPCCH
power
can
Function:
Thiscell
parameter
index.serving
DCH
andAnd
E- vice
versa.
synchonize
current
indicates
MAC
DTX
cycle
RGCH(s) the
of the
all
cells
in the
Echannel
quality
when
UEDTX
for
10ms
TTI.
When
UL
DCH active set for
the
resumes
data
transimssion
mode
is of
active,
if no
E-DCH
number
E-TTIs
indicated
from
DTX
cycle
2
status.
transmission
has
been
by this parameter.
The larger the
parameter,
performed
for Rule:
the
last MACthe
Configuration
Function:
This
parameter
more
uplink
power
willE-TTIs,
be
Inactivity
Threshold-1
Considering
power
indicates
the
MAC
DTX
cycle
consumed,
but
before
UE
UE
will perform
E-TFC
consumtion
of UE
and the
for
2ms
TTI.
When
UL
DTX
reverts
to
transmit
data
from
selection
periodically
in
each
timliness of data
mode
is active,
if nothe
E-DCH
DTX
cycle
2 state,
MAC
DTX
cycle.
transmission.
transmission
has
been
DPCCH
power
can
Configuration
Rule:
The
largerThis
the parameter,
the
Function:
parameter
performed
for
the
last
MAC
synchonize
better
towill
the
Considering
power
more
uplink
power
be
indicates
theofMAC
inactivity
Inactivity
Threshold-1
E-TTIs,
current
channel
condition.
consumtion
and
the
consumed,
butUE
the
threshold.
When
ULmore
DTX
UE
will
perform
E-TFC
And
vice
versa.
timliness
of
data
timely
the
data
can
be
mode
is active,
if no E-DCH
selection
periodically
in
each
transmission.
transmitted.
And
vice
versa.
transmission
has
been
MAC
DTX cycle.
Configuration
Rule:
When
performed
the
number
Configuration
10ms E-TTIfor
isRule:
used,
the of
continuous
E-TTIs
indicated
Considering
power
larger the parameter, the less
by
thispower
parameter-1,
UEthe
will
consumtion
ofwill
UEbeand
uplink
perform
E-TFC
selection
timliness
of but
datathe
consumed,
data
periodically
each
DTX
transmission.
transmissioninwill
be MAC
delayed
cycle.
Configuration
Rule:
to some extent.
And When
vice
Configuration
Rule: the larger
2ms
E-TTI is used,
versa.
Considering
power
the parameter,
the less uplink
consumtion
UE and thebut
power will beofconsumed,
timliness
of data
the data transmission
will be
transmission.
delayed to some extent. And
The
vice larger
versa. the parameter is,
the stricker to enter uplink
DRX , and the more uplink
power is consumed, but once
there is data, it can be send
out more immediately. And
vice versa.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

indicates the lower limit of
guaranteed bit rate used for
Function:
This parameter is
QoS negotiation/renegotiation
used
for the discontinuous
for Downlink
services. This
reception
the when
parameterofisUE
onlyinvalid
connection
moden
and is a
CN indicates unspecified
constant
required
in
negotiation method of GBR to
monitoring
the PICH cycle.
RNC.
The
discontinuous
Configuration
Rule:reception
Function:
This
parameter
cycle
is 2^k
frames.
In the
Considering
user
experience
indicates
the
level
connection
mode,
is the
and the successfulknumber
rate
of of
the
negotiated
guaranteed
bit
minimum
value
among
the
access.
rate.
This
parameter
is
DRX
cycle
length
coefficient
The higher the parameter, the
shared
by uplink
and and
of
the attached
domains,
and
better
user
experience
downlink.
UTRAN
cycle
length
the lowerDRX
access
successful
Configuration
Rule:load is
coefficient.
rate when system
Considering
user
experience
Configuration
high. And viseRule:
versa.
when
upgrading
GBR
Considering
UE'sUE's
paging
Function:
Thispower
parameter
and
the smoothness
of the
occasion
and
indicates
whether
thewhen
QoS
raise
of system
consumption
of load
UE.
negotiation
during
RAB
upgrading
GBR.
The smaller value means the
establishement
oroccasion,
relocation
The
level number,
the
moremore
UE paging
and
the
QoS
renegotiation
smoother
increment
to the
but
more
power
will
be
Function:
This
parameter
during
the
conversation
after
system
load
when
consumed.
And
theupgrading
viceof
indicates
the
lower
limit
the
service
is
established
are
the
GBR,
but
the
worse
the
versa.
guaranteed
used for
permitted
bybit
therate
RNC.
user experience.The
QoS
Configuration
Rule:
configuration
of
the The open
for
uplink
or
close
ofservices.
RAB
QoSoff
parameter
is
a trade
Configuration
Rule:
between above two factors.
Considering
userdemand
experience
depends on the
of
and
the
successful
rate of
operator.
Function:
access. This parameter
indicates
the
common
The higher
the
parameter, the
physical
channel
ID of and
better user experience
Function:
This
parameter
SCCPCH.
the lower access successful
indicates
time
Configuration
Rule:offset
It should
rate whenthe
system
load
is
between
SCCPCH
be
guaranteed
that and
Common
high.
And vise versa.
PCCPCH.
Physical Channel ID is unique
Configuration
Rule:
The
for one common
physical
parameter
is large
or small
channel within
a cell.
has no influence to the
performance.The only
requirement
is parameter
that each
Function: This
SCCPCH
should
use different
indicates the purpose
of
frame
timing
offset
to avoid
Function:
This
parameter
SCCPCH.
sending atwhether
theRule:
same
time so
indicates
the
Configuration
According
as
to avoid
high
average
SCCPCH
information
to the
actual
usage
of is
this
peak
ratio.by
broadcast
SIB5beor"Used
SIB6.for
SCCPCH,
it may
Configuration
Rule:
According
R99", "Used for
MCCH"
and
to
the
configuration
of
"Used for MCCH and R99".
SCCPCH in idle state and
connected state. If SCCPCH
information are the same in
the
two states,
the contents
Function:
This parameter
of
the
SIB5
and
SIB6
indicates whether
the are the
same,
only
SIB5
should
be
transmit diversity is activated
broadcast;
otherwise
SIB5
for the SCCPCH or not.
and
SIB6 are needed
Configuration
Rule:
According
Function:
This
parameter
separately
forused
the
two
states.
to
the
actual
indicates
whether
atransmit
sub
diversity
mode.
service is uplink or downlink.
Configuration Rule: Odd
number services are downlink
and even number services
are uplink. This is basic
service type identification
paramater.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A

indicates whether the sub
service is in CS domain or in
PS domain.
Configuration Rule: This is
basic
service
Function:
Thisidentification
parameter
parameter
and
should be
indicates the
maximum
bit
configured
according
to the
rate
of a sub
service. The
actual
domain
thethe
service
parameter
takes
value of
used.
Once
it
is
configured,
the assigned maximum bit it
will
be modified.
ratenot
in RAB
parameters
Configuration Rule: This is
Function:
Thistype
parameter
basic service
indicates
whether
this service
identification
paramater.Once
is
service.
it isMBMS
configured,
it should not
Function:
ThisRule:
parameter
Configuration
This is
be modified.
indicates
the sub
service
basic service
identity
type,
used for
numbering
for
parameter,
once
it is
each
sub service.
configured,
it can not be
Configuration
Rule: 0...5 are
modified.
Function:
This parameter
used for siganlling
service;
indicates
the
service
type of
6...250 are
used
for single
the
sub
service,
which
service. Odd number iscan be
conversational,
streaming,
configured for downlink
interactive,
background
service; even
number is or
unknown
configuredconversational.
for uplink service.
Configuration
Rule:
is
Different service
hasThis
different
basic
service
type
identity.
identification
Function: Thisparamater
parameterand
should
be
configured
according
to the
actual
traffic
supports the
64QAM
function
type
of the service. Once it is
or
not.
configured,
it should
not be
Configuration
rule: Configure
modified.
according to whether DL
Function:
This parameter
64QAM license
of the cell is
indicates
whether
the cell
purchased by the operator.
supports HSUPA 2ms TTI.
Configuration rule: Configure
according
to whether
2ms EFunction: Common
Physical
TTI license
of the cell is
Channel
Identity.
purchased
by Rule:
the operator.
Configuration
CPCId of
channels of the same cell
should be different.
CPCId of different common
Function:
This parameter
physical channels
of the
indicates
the
common
E-DCH
This
is
service
type
same cell should
be different.
transmission
time interval
identification parameter.
used when Node B and UE
both support 2ms E-TTI.
Configuration Rule: According
to user throughput, delay and
uplink interference.
2ms E-TTI can provide higher
user
througput or
delay
This parameter
is lower
the logical
but
can
bring
more
uplink
channel type indicator for
interference.
10ms
E-TTIflow.
can
common E-DCH
MAC-d
provide
less
user
througput
or
higher
delay
but
can
bring
parameter is basic
less uplink interference.
identification
parameter,
should not be modified.
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
power offset of the MAC-D

flow carried by common EDCH when 2ms E-TTI is
used,
which
is used
to
Function:
This
parameter
compute
the
quantized
gain
indicates the E-DCH HARQ
factor ed
of of
E-DPDCH.
power
offset
the MAC-D
Related
Factor:
service Eflow carried
by common
quality,
system
capacity.
DCH when 10ms E-TTI is
If
the parameter
value
used,
which is used
to is
larger,
the
E-DPDCH
compute
the
gain
Function:
Thisquantized
parameter
transmission
power
will be
factor edthe
of E-DPDCH.
indicates
maximum
larger.Accordingly,
it will
Related
Factor:
service
number
of
improve
theretransmissions
service
quality for
quality,
system
capacity.
the
MAC-D
flow
carried
by
but
affect
the system
If
the
parameter
value
is
common
E-DCH
when
2ms
capacity.
larger,
E-DPDCH
E-TTI
isthe
used.
Function:
Thispower
parameter
If
the parameter
value is
transmission
Related
Factor:
datawill be
indicates
the
maximum
smaller,
the
E-DPDCH
larger.Accordingly,
it will
accuracy,
service
data
number
of
transmission
power
will
be for
improve
theretransmissions
service
quality
throughput;
the
MAC-D
flow
carried
by
smaller.
Accordingly,
it
will
but
affect
the system
If
the
parameter
value
is
common
E-DCH
when
10ms
improve
the
system
capacity
capacity.
larger,
more times
of
E-TTI
isthere
used.
but
affect
theisservice
If
the
parameter
valuequality.
is
HARQ
retransmisson.
Related
Factor:
data
smaller,
the
E-DPDCH
Accordingly,
it will
improve the
Function:
This
parameter
accuracy,
service
data
transmission
power
will size
be
data
accuracy
but affect
the
indicates
the maximum
throughput;
smaller.
Accordingly,
it
will
service
data
throughput.
in
octets
of
the
RLC
PDU
If
the parameter
value
is in
improve
theRLC
system
capacity
If
the
parameter
value
is of
the
flexible
PDU
size
larger,
there
isservice
more times
but
affect
the
quality.
smaller,
there
is
less
times
mode
used
in
common
HARQ retransmisson. E- of
HARQ
retransmisson.
DCH.
Accordingly,
it will improve the
Accordingly,
it Rule:
will
Configuration
data accuracy
but improve
affect thethe
Function:
This
parameter
data
throughput
but
affect
Considering
rate
and the
service data data
throughput.
indicates
the
minimum
data
accuracy.
packet
error
rate.
If the parameter value issize in
octets
ofthere
the
RLC
PDU
in the
Relative
larger
value
can
Function:
This
smaller,
isparameter
less
times
of
flexible
RLC
PDU
size
mode
improve
the
supported
rate,
indicates
whether
the
MAC-d
HARQ retransmisson.
used
in common
E-DCH.
but
itcarrying
cannot
set
too
flow
DTCH
andlarge,
thethe
Accordingly,
itbe
will
improve
Configuration
Rule:
because,
in order
to affect
avoid
the
MAC-d
flow
carrying
DCCHthe
data throughput
but
Considering
transmission
influence
of to
the
error
of PLC
are
be
multiplexed
dataallowed
accuracy.
performance
when
power
is
PDU
too more
MAC
in themade
sameby
MAC-i
PDU
when
limited
and
the
L2
overhead.
segmentations
when
the
common E-DCH is used.
Relative
smaller
value can
radio condition
becomes
Configuration
Rule:
improve
transmission
Function:
This
worse. the
Considering
theparameter
rate of the
performance
when
UE power
indicates
theand
spreading
factor
DTCH data
uplink
is
limited.
But
it
cannot
be
set
supported
by
Uplink
interference.
too
small,
in
order
to
avoid
enhanced
CELL_FACH.
If DTCH and DCCH are
too
largetoL2
Configuration
Rule:
allowed
beoverhead.
in
one MAC-i
Considering
the
user
rateout
and
PDU,
DTCH
can
be sent
uplink
CEthe
resource
more quick,
atallowed
the expense
indicates
uplink of
consumption.
more uplink
interference.
If
common
MAC
flow transport
The
smaller
the
thenot
DTCH
and for
DCCH
are
bandwidth
theSF,
cell.
higher
rate
mayMAC-i
be
alloweddata
to be
in
one
Configuration
Rule:
obtained,
but
the
larger
the
PDU,
DTCH
can
be
sent
out
Considering the user rate
and
CE
resource
will
be
cost.
The
slower
and
less
uplink
uplink CE resource
larger
the This
SF,isthe
lower data
Function:
parameter
is
interference
produced.
consumption.
rate
may
obtained,
but the
the
UE
configuration
TheDTX/DRX
largerbethe
parameter,
less
the
CE
resource
will
be
Index
indicates
a set of
higherwhich
data rate
may be
cost.
DTX/DRX
parameters.
obtained, but
the largerEach
the
service
obtains
the
CE resource
beDTX/DRX
cost. The
Function:
Thiswill
parameter
parameters
according
the
smaller the
the
indicates
theparameter,
common to
UE
DTX/DRX
configuration
lower
data
rate
may
be
transport channel ID of
index.
obtained,
but the transport
less the CE
RACH. Common
Configuration
Rule:
Different
resourceID
willis be
cost.
channel
the
unique
services
use
different
identifier allocated to one
DTX/DRX
parameters,
which
common transport
channel
are
identified
by
different
within a cell One cell contains
index.
only one BCH.
be guaranteed that Common
Transport Channel ID is
unique for one common
transport channel within a
cell.
Fixed
No
N/A
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
YES
Fixed
No
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A

indicates the transmission
time interval of the RACH.
Configuration Rule:
Considering used spreading
factor and demodulation
performance.
When 20ms TTI is used by
PRACH, its spreading factor
increased by 2 times
compared to when 10ms TTI
is
used. 20ms
TTItohas better
Function:
The
parameter
It shoulde
be set
demodulation
indicates
typical
"Supported"
if performance,
theSCCPCH
external
better
quality, scenarios.
more
configuration
For
neighbouring
cell
supports
advantageous
each
the
uplinkscenario,
16QAM.for
demodulation by
NodeB.
corresponding
load
balance
different values.
Configuration
Based on
Function: ThisRule:
parameter
the
following
requirement
indicates the maximum of
the operator:
of
number
of UEthe
in aopening
cell whose
CBS,
MBMS;
the rate
transport
resource
will be
requirement
of transport
the FACHpath
released while
carrying
data,
the
capability
is overload.
requirement
of
the
Configuration Rule:PCH
The of
the
cell.
parameterconfiguration
should be setindex
Function:
Function:
GBR
AMR
according
to volumn
theofactual
of the traffic
Service
Whether
to
be
configuration
of
the
transport
measurement parameters.
Reserved
Indicator.
resource.
Configuration Rule: It is
Configuration
configured by Rule:
network
To
turn on
the function,
Function:
Adjust
the
planner
according
tooccupied
thein Iu
UP
V1,
when
the
CN
bandwidth
of CCH
network condition.
assignment
GBR
is not
Configuration
Rule:
It is
matching
the AMR
configuredwith
according
to rate
the
configured
bythe
RNC
, the to
CN
bandwidth of
TrPath
assignment
of AMR
the cell and GBR
whether
the
service
is forcibly
reserved,
operators
are sensitive
to the
and
it
can
make
the
occupied bandwidth AMR
of CCH
traffic re-access with GBR
when it is rejected with
When
is detected
MaxBRUE
rate.
entering
specific
area from
To turn off the function,
when
non-specific
area, orGBR
entering
the CN assignment
is
non-specific
not matchingarea
with from
the AMR
specific
area, RNC
refers, the
the
rate configured
by RNC
SAI
responding
to
the
Cell-ID
CN assignment GBR of AMR
of
current
UE forcibly
cell as
service
is not
positioning
result,
reserved.
Main function: Thisand
parameter
transmits
location
report
to
It
is generally
set to
only
indicates
the
Node
B"off"
number,
CN
through
Iuinport.
when
other
company's
which
is valid
RNC. RNC
across IUR
doesn't
Influence
factor:
thesupport
value
the CN set
assignment
GBR.
should
by the Newwork
The parameter must be same
withANI of NodeB bereau in
When
Link(x)BrsType
is
rncNeInfo
MO.
equal to 0(ATM), LinkId(x) is
equal to LinkId in the record
of R_ATMSIGLINK with same
ANI.
When Link(x)BrsType is
equal to 1(IP), LinkId(x) is
equal to ASSOCID in the
record of rncNdbSctp with
same NodeBNo.
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
When Link(x)BrsType is
equal to 0(ATM), LinkId(x) is
equal to LinkId in the record
of R_ATMSIGLINK with same
1)If
ANI.
rncIubOff.IubNBAPBrsType
When
Link(x)BrsType
is
When
Link(x)BrsType
is
equal
0(ATM),
then
equal
to
1(IP),
LinkId(x)
is
equal
to
0(ATM),
LinkId(x)
Link1BrsType
must in
bethe is
equal
to
ASSOCID
equal
to LinkId
the record
configured
as 0in(ATM),
record
of rncNdbSctp
with
of R_ATMSIGLINK
with
same
Link2BrsType
and
1)If
same NodeBNo.
ANI.
Link3BrsType
must
be
invalid
When
Link(x)BrsType is
or
0(ATM)
equal
0(ATM),
equal
to
1(IP), then
LinkId(x) is
2)If
Link1BrsType
must in
bethe
equal
to
ASSOCID
configured
as
0
(ATM),
record
of rncNdbSctp
with
equal 1(IP),
then
Link2BrsType
and
1)If
same NodeBNo.
Link1BrsType
must
be
Link3BrsType
must be invalid
configured
as 1 (IP),
or
0(ATM)
equal
0(ATM), and
then
Link2BrsType
2)If
Link1BrsType
must
Link3BrsType
must be
be invalid
configured
as
0
(ATM),
or1(IP)
equal 1(IP), then
Link2BrsType
and
1)If
3)If
Link1BrsType
must
Link3BrsType
must be
be invalid
configured
as
1
(IP),
or
0(ATM)
equal
0(ATM),
then
2(IP&ATM
Mixed), then
Link2BrsType
and
2)If
Link1BrsType
must
Link1Id
and
Link2Id
must
be
Link3BrsType
must be
be
invalid
configured
as
0
(ATM),
configured(Link3Id
allowed
or1(IP)
equal
1(IP),
then
Link2BrsType
and
be
miss).
Link(1-3)BrsType
1)If
3)If
Link1BrsType
must
Link3BrsType
must be
be
invalid
must be configured
as IP
and
configured
as
1
(IP),
or
0(ATM)
ATM
equal
0(ATM),
then
2(IP&ATM
Mixed),
then
Link2BrsType
and
2)If
Link1BrsType
must
Link1Id
and Link2Id
must
be
Link3BrsType
must be
be
invalid
configured
as
0
(ATM),
configured(Link3Id
allowed
or1(IP)
equal
1(IP), then
Link2BrsType
and
be
3)Ifmiss). Link(1-3)BrsType
Link1BrsType
must
Link3BrsType
must be
be
invalid
must be configured
as IP
and
configured
as
1
(IP),
or
0(ATM)
ATM
equal
2(IP&ATM
Mixed),
then
Link2BrsType
and
2)If
Link1Id
and Link2Id
must
be
Link3BrsType
must be
invalid
configured(Link3Id
allowed
or1(IP)
equal
1(IP), then
be
Link1BrsType
must be
must be configured
as IP and
configured
as
1
(IP),
ATM
equal
2(IP&ATM
Mixed),
then
Link2BrsType
and
If
R_SCTPAC->OUTStreams
Link1Id
and
Link2Id
must
be
Link3BrsType
be invalid
equals
0, then must
OutSteamId
configured(Link3Id
allowed
or1(IP)
must
be configured as 0. If
be
R_SCTPAC->OUTStreams
must be configured as IP and
more
than 2 , then
ATM
equal
2(IP&ATM
Mixed),
then
OutSteamId
must
be
function
of this
parameter:
Link1Id
and
Link2Id
must
be
configured
in [1-(R_SCTPACThis
parameter
indicates
configured(Link3Id
allowed
>OUTStreams
- 1)]
EUTRAN
Cell Type.
be miss). Link(1-3)BrsType
Factors
of
consideration:
must be configured as IP and
network
feature. If cell
ATM
support
TDD-LTE,
this
parameter
is
set
1,
otherwise
start
0.
value of IDNNS Range
Factors of consideration: if
RNC need support Mapping
from
IDNNS
to CN
Pool, this
Function
of this
parameter:
parametre
is
set
according
to
This parameter indicates End
the
real
configuration
value of IDNNS Range
RNC need support Mapping
from IDNNS to CN Pool, this
parametre is set according to
the real configuration
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
YES

applied feature info of Ue for
Routing CN
Factors of consideration: i if
RNC Select CN by IMSI, the
Function
parameter:
value is 1,ofifthis
RNC
Select CN
This
parameter indicates
by IDNNS(Derived
from
which
IMSI), positions
the value of
is Digit
2; for
IMSI
match
otherwise
0
RNC Select CN by IMSI,
Function
of parameter
this parameter:
Config this
This
parameter
indicates Digit
according
the position
for
IMSI match
information
Config this parameter
according the Digit
Function
of this parameter:
information
This parameter indicates The
Rule No of IMSI-MAP
Unique Index for IMSI-MAP
planning
whether
support
PS
FunctionRNC
of this
parameter:
handover
with LTE
This
parameter
indicates CS
Resource Pool Id for IMSIbased routing
RNC
Select
CN parameter:
by IMSI,
Function
of this
Config
this parameter
This
parameter
indicates PS
according
the IMSI
Resource Pool
Id for IMSIinformation
based routing
RNC
Select
CN parameter:
by IMSI,
Function
of this
Config
this parameter
This
parameter
indicates CS
according
the IMSI
Resource Pool
based routing
RNC
Select
CN parameter:
by IMSI,
Function
of this
Config
this parameter
This parameter
indicates PS
according
the IDNNS
Resource Pool
based routing
Function
of parameter
this parameter:
Config this
This
parameter
indicates the
according
the IDNNS
Virtual
LAC of the CELL
information
boundary of LAC
ifFunction
CELL isofatthis
the parameter:
boundary of
LAC,
the
Virtual
LAC
is set as
the
neighbour
LAC
RNC support Virtual LAC
Paging or not
function switch. If RNC
support, set it as 1.otherwise
0
Fixed-keep
monitoring
No
N/A
Network
Planing&Optimi No
zation
N/A
Network
Planing&Optimi No
zation
N/A
Fixed-keep
monitoring
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
YES
Don't Care
No
N/A
Parameter function: Specifies

the MR-UE location
measurement mode for the
MR function.
location
location
Function:precision,
This
parameter
is
Parameter
function:
Specifies
expense.
usedMR-UE
to indicate
whether
the
location
If
"RTT service
preferred",
then
MBMS
of 128kbps
measurement
mode
for the
theis
RTT
mode
is
chosen
supported
or
not
MR function.
definitely.
sends
RTT
Configuration
Rule:
It should
ParameterRNC
controlling
factor:
dedicated
measurement
be set according
tolocation
the
location
precision,
control
in MBMS
Iub interface
provided
serviceand
data
expense.
UE
Rx-Tx
time
difference
rate
If
"RTT preferred", then the
type
in Uuisinterface.
RTT 1
mode
chosen The
location
precision
mayRTT
not be
definitely. RNC sends
higher,
but
the
influence
dedicated measurement on
Uu interface
control
in Iubperformance
interface andis
lower.
UE Rx-Tx time difference
If
"AGPS
preferred",
then
Parameter
function:
Specifies
type
1 in Uu
interface.
Thethe
Uu
interface
UEB
AGPS
the
waiting
time
length
for be
location precision may not
measurement
can
be
chosen
CELL
UPDATE
message.
higher, but the influence on
Parameter
Function:
only
when the
AGPS This
Parameter
controlling
factor:
Uu interface
performance
is
parameter
indicates
the
condition
is
satisfied.
The
success
lower.
power
offset
for time
white
list the
location
precision
is higher,
ratio,
handover
delay,
If "AGPS
preferred",
then
users.
When
calculate
the
but
the
influence
on
Uu
handover
success
ratio
Uu interface UEB AGPS
initial
DL
power
for
the
white
interface
performance
is
also
The
bigger
value
means
the
measurement can be chosen
list
user,
this
parameter
is
an
higher,
and
may
influnence
longer
time
waiting
for
the
only when the AGPS
additional
offsetThe
to the
the callUPDATE
setup
success
ratio
in
CELL
message
condition
ispower
satisfied.
initial
DLprecision
power
calculating
the
initial
call
phase.
from
UE,
the longer
for
location
is time
higher,
formula
of normal
user.
the
time
delay,
and
theis
Parameter
Function:
This
but call
the influence
on
Uu
Configuration
Rule:
It needs
higher
successful
rate
for
the
service
identification
interfacetype
performance
is also
to
consider
whether
the
white
paramater.
higher, and may influnence
list
need success
bigger
initial
Configuration
Rule: Different
the user
call setup
ratio in
power
than
normal
Parameter
Function:
This
services
which
are user.
the initial
call
phase.
Bigger
this indicates
parameter
is,
parameter
the
step
distinguished
by traffic
class,
bigger
initial
power
of
the
of
increasing
the
uplink
SIR
CN domain indicator,
white
list
user.
target
for and
white
list users.bit
direction
maximum
Smaller
this
parameter
is ,
Configuration
Rule:
It needs
rate should have different
smaller
initial
power
of
the
to
consider
the
service
service
type
identification.
white
listthe
user.
quality,
system
capacity
Adjustment
Suggestion:
parameter
indicates
the step
If
the
parameter
value
is SIR
too
Primary
key
can
not
be
of
decreasing
the
uplink
Parameter
Function:will
This
large,
the
SIRtarget
be
modified.
target
for white
list users.
parameter
indicates
the
increased
too
higherthe
to waste
Configuration
Rule:
maximum
step
of
decreasing
the
power
resource
affecting
service
quality,target
the system
the
uplink
the
systemSIR
capacity; for white
capacity
list
users.
If the
the parameter
parameter value
value is
is too
too
If
Configuration
Rule: Itwill
needs
small,
the SIRtarget
SIRtarget
be
large,
the
will
be
to
considertoo
the service
quality
increased
toto
affect
decreased
tooslow
lower
affect
Parameter
Function:
This
and
the
system
capacity
the
service
quality;
the
service
quality;
parameter
indicates
whether
If the parameter
valueThis
is too
Parameter
Function:
If
the parameter
value
is too
uplink
outer
loopSIR
power
large,
the
uplink
target
parameter
indicates
the
small,
the
SIRtarget
will
be
control
(OLPC)
based
on
decreasing
accuracy
will
be
maximum downlink DPCH
decreased
too
slow
to
waste
SIRtarget
adaptive
down
step
too
low.
Accordingly
it
will
the
power
resource
affecting
size
isthe
used
or not for
white
affect
demodulation
list
users.
the
system capacity;
list
users.
performance,
and
affect
Configuration
Rule:it Itwill
needs
Configuration
Rule: Itquality
needs
the service
consider
thequality.
service
to
consider
service
quality
If the
parameter
value
is too
and
cell
capacity.
and
system
capacity.
small,
the
uplink
SIR
target
The configure principle
is to
If
the switch
is on,
SIR
decreasing
rate
will
be target
toothe
ensure
the power
satisfy
decrease
would be
rapidly
slow. Accordingly
it will
affect
minimum
requirement
for
the
when
service
quality
is good,
the in
system
capacity.
UE
the margin
of the
cell, it
and
system
wouldthe
When
SwchAdaptiveStep=0,
means
that itcapacity
can conquer
be
increased.
this parameter
invalid.
maximum
path is
loss.
If
the switchSuggestion:
is off, SIR target
Adjustment
decrease
step ispower
fixed, of
and
If
the maximum
the
service
is relative
service quality
is too big,
the power
good.
of this service can get a very
high power when the radio
condition is bad, and it will
cell.
If the maximum power of the
service is too small, the
power of the service might
not satisfy the requirement in
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
minimum downlink DPCH

list
users. Function: This
Parameter
Configuration
Rule: Itthe
needs
parameter indicates
to
consider
the
call
drop
quality factor of the UL rate
and
cell capacity.
DPCCH
PILOT domain for
Adjustment
Suggestion:
white list users.
If the value of Rule:
the parameter
Configuration
Eb/N0 of
is
too big,PILOT
it will make
the
DPCCH
domain
is
Parameter
Function:
This
power
cannot
be
decrease
to
different
in
different
radio
parameter
indicates
the
a
suitable
level,
and
it
will
environment,
it needs
to
maximum
allowed
UL
power
Parameter
Function:
This
reduce
the
capacity
of
the
consider
the
service
quality
for
white listindicates
users. the initial
parameter
cell.
and cell capacity.
Configuration
Rule:
It needs
SIR
list
users.
If thetarget
valuefor
of white
the
parameter
The
bigger
this
parameter
is,
consider
the
service
quality
Configuration
Rule:
It
needs
is
too
small,
it
will
increase
the
bigger
power
of
the
and
celldrop
capacity.
The
value
to
consider
the
uplink
the
call
rate.
Decrease
service,
it will
reduce
the
of
this
parameter
should
synchronization
and may
cell
the
poweroftoo
much
capacity
cell.
ensure
thepower
uplink
coverage.
uplink
capacity.
Initial
SIR is,
make
the
cannot
The
smaller Suggestion:
this parameter
Adjustment
target
of
the
service
should
return
to
normal
level,
so the
the
smaller
power
of the
If
too
small
of
this
parameter,
near
the
normal
level
of the
call
drop
happened.
Parameter
Function:
This
service,
it
will
affect
the
itSIR
willtarget,
reducethis
thecan
quality
of
make
parameter
indicates
the the
quality
of the
service.
uplink
services.
initial
convergence
of target
the SIR
maximum
uplink
SIR
Adjustment
Suggestion:
If
too bigger
of this
target
rapidly.
for
white
users,
is aimed
When
thelist
cell
uplinkitincrease
capacity
parameter,
itSuggestion:
might
Adjustment
to
avoid
SIR
target
increasing
is
limit,
the
value
of
this
the
uplink
and
If
the
valueinterference
of this
parameter
Parameter
Function:
This
too
much.
parameter
can
be reduced
reduce
the
capacity.
is
too
big,
it
would
make
the
parameter
indicates
Configuration
Rule: Itthe
needs
duly.
The
real
maximum
power
be
increased
too
much
minimum
uplink
SIR
target
for
to
consider the
service
quality
transmission
power
is the
in
the
initial
period
after
white
list
users,
it
is
aimed
to
and
cell uplink
capacity.
minimum
value
ofdecreasing
service
setup,
and
it would
avoid
SIR
target
Adjustment
Suggestion:
MaxUlDpchPwr
and of
thethe
UE
reduce
the capacity
too
much.
If
this
parameter
is
too
big, it
transmission
power
ability.
cell.
Configuration
Rule:
needs
might make the
SIR Ittarget
If
the
value
of
this
parameter
to
consider
service
quality
too
big,
andthe
make
the uplink
is
toocell
small,
it would
make
and
uplink
power
too
big,
itcapacity.
would
affect
Parameter
Function:
Theinitial
the
too
low in the
Adjustment
Suggestion:
the power
cell capacity.
parameter
indicates
the
period
after
service
setup,
If
this
parameter
is
too
it
If this parameter is too big,
small,
transport
channel
BLER
it make
wolud
cost
long
time
to
might
the
SIR
target
itand
might
make
the
power
too
Parameter
Function:
quality
forthe
whiteThis
complete
uplink
cannot
be
decreased
tolist
a
small
totarget
satisfy
parameter
indicates
the
error
users.
synchronization,
even
make
suitable
value,
and
make
the
requirement
of
uplink
receiver
transport
blockRule:
number
Configuration
Inwould
needs
uplink
synchronization
failure.
power
cannot
be
decrease
to
demodulation,
and
it
threshold
in
outer
loop power
to
consider
the
service
quality
a
suitable
level,
it
would
affect
affect
the
service
quality and
control
using
threshold
and
system
capacity.
the
cell
capacity.
uplink
coverage.
Parameter
Function:
The
algorithm
for white
users.
If
the
value
is
If
this parameter
parameter
is list
too
small,
parameter
indicates
the
the
Configuration
Rule:
In
needs
larger,
it
will
improve
the
ittolerance
might need
long
time
to
period
in
uplink
to
consider
the
service
quality
system capacity
affect the
increase
the
SIRbut
target
outer
loop
power
controlfrom
and
system
capacity.
service
quality.
the
minimum
value
to
normal
using
threshold algorithm
for
If
the
value
is
If
the parameter
parameter
value
is the
working
level,
and
affect
white
list
users.
larger,
itquality.
more
difficult
to
Parameter
Function:
This
smaller,
itiswill
improve
the
service
Configuration
Rule:
In
needs
increase
the
parameter
indicates
white
list
service
quality
but
affect
the
Parameter
Function:
This
to
consider
theAMR
service
quality
it
will
users
R99
CS
services
system
capacity.
parameter
indicates
white list
and
capacity.
improve
theservices
system
errorsystem
transport
blockcapacity
number
users
AMR
tolerance
If
the
parameter
value
is
but
affect
the when
service
threshold
when
cell
inquality.
high
BLER
period
cell
intothe
larger,
it is more
difficult
If
the
parameter
value
isAMR
load
status
for
R99
CS
high
load
status
for
R99
CS
decrease
the
smaller,
itadjustment.
is target
more easier to
services
AMR
BLER
it will
increase
the SIRtarget.
Configuration
Rule: In needs
adjustment.
improve
the
service
quality
Accordingly,
it
will
improve
the
to
consider theRule:
service
Configuration
Thequality
value
but
affect
the
system
service
quality
but
affect
the
and
system
capacity.
of
this
parameter
should
capacity.
system
capacity.
If
the parameter
value
make
the
service
BLERis
If
the parameter
value
isin
larger,
it
is
more
difficult
to
high
load
condition
higher
smaller,
itthe
is more easier to
increase
then
that in
the
lower load
decrease
the
SIRtarget.
it will
condition,
in
this
the
cell
Accordingly,
it willway,
improve
the
improve
the
system
capacity
capacity
can
be
increased.
system
capacity
but
affect
the
but affect
the
service
And
in the
same
time,quality.
the
service
quality.
If
the parameter
value of
is the
minimum
requirement
smaller,
it
is
more
easier
service quality should be to
increase
satisfied. the SIRtarget.
Accordingly,
it willisimprove
the
If this parameter
too small,
service
quality
but
affect
the
it would be too easy for uplink
system
capacity.
AMR
service
to decrease the
SIR target in uplink high load
status, and it would affect the
AMR service quality.
would be too hard for uplink
AMR service to decrease the
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A

of this parameter should
make the service BLER in
high load condition higher
Parameter
then that inFunction:
the lower This
load
parameter
condition, inindicates
this way,the
the cell
threshold
of HARQ
failure
capacity can
be increased.
indication
to increase
And in thenumber
same time,
the
SIR
targetrequirement
for white listofusers
minimum
the
when
E-TTI=10ms.
service
quality
should
be
Configuration
Rule: Itthe
needs
satisfied. indicates
parameter
to
consider
the
service
quality
Bigger
thisofparameter
is,
threshold
HARQ
failure
and
system
capacity.
bigger BLER
for downlink
indication
number
to increase
If
thetarget
parameter
value
AMR
service.
SIR
for white
listisusers
larger,
it
is
more
difficult
to
Parameter
Function:
If
this
parameter
is
too
small,
when E-TTI=2ms. This
increase
the
parameter
indicates
the
BLER
of
downlink
AMR
itquality
willin
number
of HARQ
service
would
too small
to
consider
thebe
service
improve
the
system
capacity
retransmission
(NHR)
downlink
high
load
status,
and
system
capacity.
but
affect
thedecrease
service
threshold
to
SIR
and
it parameter
would
affect
thequality.
system
If
the
value
is
If
the
parameter
value
isto
target
for
white
list
users
capacity.
larger,
it is more
difficult
Parameter
Function:
This
smaller,
it
is
more
easier
to
when
E-TTI=10ms.
If
this
parameter
is
too
increase the
parameter
indicates thebig,
increase
the
SIRtarget.
Configuration
Rule:
It
needs
BLER
of
downlink
AMR
it will
number
of HARQ
Accordingly,
it be
will
improve
to
consider
service
service
would
too
bigquality
in the
improve
thethe
system
capacity
retransmission
(NHR)
service
quality
but
affect
the
and
system
downlink
high
load status,
but
affect
thecapacity.
service
quality.
threshold
to
increase
SIR
system
capacity.
If
the
value
is
and
would
affect
the
AMR
If
theit parameter
parameter
value
is
target
for
white
list
users
larger,
it
is
more
easier
toto
serviceE-TTI=10ms.
quality.
Parameter
This
smaller,
it isFunction:
more easier
when
decrease
the
parameter
indicates
the
increase the SIRtarget.
Configuration
Rule: It needs
itquality
willthe
threshold
ofthe
sample
number
Accordingly,
it will
improve
to consider
service
improve
the
system
capacity
to
increase
SIR
target
for
service
quality
but
affect
the
but
affect
the service
quality.
white
listcapacity.
users
when
system
If
the
parameter
valueEis
Parameter
Function:
This
If
the parameter
value
isto
TTI=10ms.
larger,
it is more
difficult
parameter
indicates
the
smaller,
it
is
more
difficult
to
Configuration
increase the Rule: It needs
threshold
of
sample
number
decrease
the
SIRtarget.
to
consider
the
service
quality
to
decrease
SIR
for the
Accordingly,
it willtarget
improve
and
system
improve
the capacity.
system
capacity
white
list
users
when
Eservice
quality
but
affect
the
If
the
parameter
value
is
but affect the service quality.
TTI=10ms.
system
larger,
itcapacity.
is more
difficult
Parameter
Function:
This
If
the parameter
value
isto
Configuration
Rule:
Itthe
needs
increase
parameter
smaller, itthe
isindicates
more
easier
to
to
consider
the
service
will
number
HARQ
increaseofthe
SIRtarget.itquality
and
system
improve
the capacity.
system
capacity
retransmission
(NHR)
Accordingly,
it will
improve
the
If
the
parameter
value
is the
but
affect
the
service
quality.
threshold
to
decrease
SIR
service quality but affect
larger,
itcapacity.
iswhite
morelist
difficult
If
the parameter
value
isto
target
for
users
system
Parameter
Function:
This
decrease
the
smaller,
it isindicates
more easier
to
when
E-TTI=2ms.
parameter
theit will
increase
the
SIRtarget.
Configuration
Rule:
It
needs
number
of
improve
theHARQ
service
quality
Accordingly,
it will
improve
the
to
consider
the
service
quality
retransmission
(NHR)
but
affect
the
system
service
quality
but
affect
the
and system
threshold
to capacity.
increase SIR
capacity.
system
capacity.
If
the parameter
value
is
target
for
white
list
users
If
the
parameter
value
isto
larger,
it
is
more
easier
Parameter
Function: This
when
E-TTI=2ms.
smaller,
it
is
more
easier
to
decrease
the
parameter
indicates
Configuration
Rule: Itthe
needs
decrease
the
SIRtarget.
itquality
will
threshold
ofthe
sample
number
to
consider
service
Accordingly,
it will
improve
the
improve
the
system
capacity
to
increase
SIR
target
for
and
system
capacity.
system
capacity
but
affect
the
but
affect
the service
quality.
white
list users
when
If
the
parameter
valueEis
service
quality.
Parameter
Function:
This
If
the parameter
value
isto
TTI=2ms.
larger,
it is more
difficult
parameter
indicates
the
smaller,
it
is
more
difficult
to
Configuration
increase the Rule: It needs
threshold
of
sample
number
decrease
the
SIRtarget.
to
consider
the
service
quality
to
decrease
SIR
for the
Accordingly,
it willtarget
improve
and
system
improve
the capacity.
system
capacity
white
list
users
when
Eservice
quality
but
affect
the
If
the
parameter
value
is
but affect the service quality.
TTI=2ms.
system
larger,
itcapacity.
is more value
difficultisto
If
the parameter
Configuration
Rule:
It needs
increase
smaller, itthe
is more
easier
to
to
consider
the
service
will
increase the SIRtarget.itquality
and
system
improve
the capacity.
system
capacity
Accordingly,
it will improve
the
If
the
parameter
value
is the
but
affect
the
service
quality.
service quality but affect
larger,
itcapacity.
is more value
difficultisto
If
the parameter
system
decrease
the
increase the SIRtarget.it will
improve
the service
quality the
Accordingly,
it will improve
but
affect
the system
service
quality
but affect the
capacity.
system capacity.
decrease the SIRtarget.
Accordingly, it will improve the
system capacity but affect the
service quality.
Don't Care
No
YES
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
consider the service quality

Turn
on thisFunction:
switch, when
Parameter
This TB
number
is
less
then
parameter indicates the white
BLERAccpPeriod,
thefor
SIR
list users BER target
a
target
can
be
decreased
physical channel in Valid
based
on the physical
Time Windows
when the FP
channel
BER, so
the SIR
mode
is
silent,
which
is the
Parameter
Function:
This
target
can
be decreased
base
of
outerloop
power
parameter
the
rapidly,
andindicates
the using
system
control
method
physical
number
threshold
of
physical
capacity
can be increased,
channel
BER.
channel
BER less
thanwill
or be
but
the service
quality
Configuration
Rule:
Itthe
needs
equal
BER
target
in
uplink
affected.
to consider
the service
quality
outer
loop
power
control
BER
Turn
off thisFunction:
switch, he
SIR
and
system
capacity.
Parameter
This
based
algorithm
for
white
list
target
can be
decreased
only
If
the parameter
value
parameter
indicates
theisEusers.
when
TB
isoffset
reach
larger,
it isnumber
more
easier
to
DCH
HARQ
power
Configuration
Rule:
It needs
BLERAccpPeriod
and
error
decrease
the
FDD
for
white
list
users,
to
consider
the
service
TB
number
is less
thenitquality
will
which
is used
to compute
the
and
system
capacity.
ErrorThresh,
sofactor
the SIR
improve
the
system
capacity
quantized
gain
ed
of
If
the
parameter
value
is
target
canthe
be service
decreased
but
affect
quality.
E-DPDCH.
larger,
it
is
more
difficult
to
Function:
all radio
links
slowly,
andIf the
system
If
the parameter
value
is
Configuration
Rule:
ItCS
needs
decrease
the
handover
to DRNC,
capacity
will
be
less,
butquality
the
smaller,
it
is
more
difficult
to
to
consider
the
service
itfor
will
relocation
is performed
service
quality
will
be
better.
decrease
the
SIRtarget.
and
system
capacity.
improve
service quality
VIP
usersthe
when
Adjustment
Suggestion:
Accordingly,
itsystem
willvalue
improve
If
the
parameter
is the
but
affect
the
VipCsReDelayTimer
is
When
system
uplink
capacity
service
quality
but
affect
the
larger,
the
E-DPDCH
capacity.
expired
is
limit, this
can
be
Function:
If function
allpower
radio will
linksbe
system
capacity.
transmission
If
the
parameter
value
is
Configuration
Rule: user
open.
handover
to DRNC,
larger.Accordingly,
it PS
will to
smaller,
it is
more
easier
experence,
service
relocation
is
performed
for
improve
the
service
quality
decrease
the
SIRtarget.
interruption
VIP
users
when
but
affect
theitsystem
Accordingly,
willisimprove
the
If
the
parameter
larger,
VipPsReDelayTimer
is
capacity.
system
capacity
but
affect
the
relocation
is
triggered
expired
If
the parameter
value is
service
quality.Rule:
slowerly.
Configuration
user
smaller,
the
E-DPDCH
If the parameter
is smaller,
experence,
service
transmission
power
willmore
be
relocation
is triggered
interruption
smaller.
Accordingly,
it
will
quickly.
Parameter
Function:
This
If
the parameter
is larger,
improve
theindicates
system
capacity
Adjustment
suggestion:
parameter
the
IMSI
relocation
is triggered
but
affect
the
service
quality.
UTRAN
will
doen't
perform
Digits
Number
in
White
List
slowerly.
relocationfor
VIPisvia
IUR to
for
User
Identification.
If the
parameter
smaller,
avoid
service
interruption
and
Configuration
Rule: This
relocation
is triggered
more
improve
user
experience.
parameter
should be set
quickly.
according
User IMSI
Adjustmenttosuggestion:
Range.the
UTRAN will doen't perform
Bigger
this Function:
parameter
is, the
relocationfor
VIP via IUR
to
Parameter
This
less
of
users
in
one
white
list
Parameter
Function:
This
avoid
service
interruption
and
parameter indicates the IMSI
group.
the
parameter
indicates
whether
improve
user
experience.
High-bit Digits in white List for
Smaller
this
parameter
is ,
the
User
is VIP
Configuration
User
Identification
the
more
users
onethe
Rule:
VIPof
user
caninuse
Configuration
Rule:
This
white
listresource
group.
system
parameter
shouldfirstly
be set
relative
to
users. If
according common
to User IMSI.It's
This
parameter
is
set
to
not adjustable.
"YES", the performance of
the user will be best, but the
Parameter
Function:
This
performance
of common
parameter
the basic
users may indicates
be worse(the
priority
UE inmaybe
the white list
service of
online
Configuration
Rule:
the larger
dropped and new
ordinary
of
the parameter,
the higher
service
maybe access
Parameter
Function:
Thisis set
priority
the
UE using
failed).IfofThis
parameter
parameter
indicates
the
system
resource;
the
smaller
to "No", the user will be
treat
HSPA
Scheduling
priority
of
parameter,
the
less of
as the
a common
user.
UE
in the
white
priority
of the
UElistusing
Configuration
Rule: the larger
system resource
of the parameter, the higher
priority of the UE using
system resource; the smaller
of the parameter, the less
priority of the UE using
system resource
Don't Care
No
N/A
Don't Care
No
N/A
Fixed
No
Yes
Fixed
No
Yes
Fixed
No
N/A
Fixed
No
Yes
Fixed
No
YES
Don't Care
No
Yes
Fixed-keep
monitoring
No
YES
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A

congestion Scheduling
priority of UE in the white list
Configuration Rule: the larger
of
the parameter,
the This
higher
Parameter
Function:
priority
of
the
UE
using
system resource;
smaller
Parameter
Function:
application
prioritythe
of This
UE
in
of
parameter,
thewhether
less
parameter
indicates
thethe
white
list
priority
of
theDrop
UE
using
Forced
Call
willthe
belarger
Configuration
Rule:
system
resource
Triggered
when
the
Ordinary
of the parameter, the higher
PS
Number
in
priority
of theonline
UE using
CELL_DCH
state
is
system resource; thelarger
smaller
than
of thePsUserThrdForVIP
parameter, the less
when
User
Exists
priorityVIP
of the
UE
usingin the
Cell
system
resource
Parameter
Function:
Configuration
Rule:
the
Configuration
Rule: ififThis
the
parameter
indicates
the new
parameter
parameter is
is set
set to
to "On",
"On",
Lowest
Priority
ofmaybe
Neighbor
ordinary
service
Forced Call
Drop
will
be
Cell
Notified
of
VIP
Existing
access
failed
and
Forced
Call
Triggered when
the
Ordinary
Parameter
Function:
This
when
VIP
Exists
and
Drop
will
be
Triggered
when
User Number
online whether
in
parameter
indicates
Neighbor
Cell
need
be
the
Ordinary
PS
Number
CELL_DCH
state
is to
larger
uplink
outer
loop
power
notified.Only
the
neighbor
cell
online
in(OLPC)
CELL_DCH
state
is
than
PsUserThrdForVIP
control
based
on QE
that
Measurement
Prioority
is
larger
than
when
VIP
User
Exists
in
the
is
usedororhigher
not inthan
the valid
time
equal
this
PsUserThrdForVIP
when
VIP
Cell; else,
notlist
triggered.
window
forwill
white
user if
priority
will
be
User
Exists
inisnotified.
the
Cell; else,
the
FP
Mode
silent.
Parameter
Function:
This
Configuration
Rule: the
larger
will
not triggered.
Configuration
Rule:
The
value
parameter
indicates
whether
of the value,
the
more
cell
will
of
this
parameter
should
the
white list function
is open
be influenced
when VIP
consider
or
not.andthe
exists
theservice
more quality
and
system
capacity.
Configuration
Rule:
it's
probability that the VIP
Turn
on
this
switch,
feature
switch
and
not
performance can bewhen TB
number
is less
adjustable.if
thethen
functionof
is
guaranteed;
the
smaller
BLERAccpPeriod,
opened,
the value,the
theperformance
less the
cell SIR
willof
be
target
canusers
be
decreased
common
may
influenced
when
VIPbe
exists
based
the
physical
worse(the
service
onlinethat
and theonless
probability
channel
BER,
so
the
SIR
maybe
dropped
and
new
the
VIP
performance
can be
This
parameter
indicates
Parameter
Function:
Thisthe
target
can
be
decreased
ordinary
service
maybe
guaranteed;
time
of the
check
period
parameter
the that
rapidly,
andindicates
the system
access
failed)
the
VIP number
of
the cell
additional
sizebefor
uplink
SIR
capacity
can
increased,
Fucntion:
Switch
of
HSDPA
and
itsincreasing
adjacent
cells
turn
target
when
but the
service
quality
will 0.
be
Load
Balance
for Signaling
(based
on 6Function:
seconds).If
the
consecutive
error
TB This
occurs.
affected.
Parameter
on
DCH
in RRC
Connection
VIP
number
turns
0,It
RNC
will
Configuration
Rule:
needs
Turn
off this
switch,
he
SIR
parameter
indicates
the
valid
Procedure
notifies
NodeB.
to
consider
the
service
quality
target
can
be
decreased
only
time
window
forwhether
TB in the
Related
factor:
ifwhen
thesystem
check
period
tooHSPA
long,
and
capacity.
TB
number
isisreach
shield
period.
load
balance
is
used
during
the
CPU
load
will
increase.
If
the
parameter
value
is
BLERAccpPeriod
and
error
Configuration
Rule: It needs
procedure
ifRRC
check
period
is too
larger,
the SIR
target
will
be
TBthe
number
is
less
then
to
consider
the
service
quality
If
this
switch
is
on,
when
RRC
short,
the
NON-VIP
be
increased
more
rapidly
ErrorThresh,
so the will
SIRwhen
and
system
capacity.
singnaling
is
forced
to
impressed
too
long,
and
the
consecutive
error
occurs.
target
can be
decreased
If
the parameter
isTB
too
big,
establish
on
DCH
and
the
QOS
will
be
effected.
Accordingly,
it
will
improve
the
slowly,
and
the
system
even
ifservice
the time
betweenas
two
initial
isbut
classed
service
quality
affect
the
capacity
will
be
less,
but
SIR
target
increasing
is too
"PS
service"
and
system
capacity.
service
quality
willUE
be protocol
better.
long,
the
SIR
target
version
is R5Suggestion:
or later,
RNC
If
the parameter
value
is
Adjustment
increasing
step
size
in
the on
could
balance
user
based
smaller,
the
SIR
target
will be
When system
uplink
capacity
second
time
will
be
HSDPA
load
balance
strategy,
increased
more
slowly
when
is
limit,
this
function
can
be
increased,
it will could
affect the
otherwise,
RNC
consecutive
error
TB
occur.
open.
system
capacity.
balance
useritbased
on R99
Accordingly,
willisimprove
If
the
parameter
too big, the
load
balance
strategy.
system
capacity
butbetween
affect the
only when
the time
service
two
SIRquality.
target increasing is
Adjustment
Suggestion:
very short, the
SIR target
If
there
is
no
need
increasing step
sizetoinincrease
the
the
SIR
target
increasing
step
second time could be
size
when
consecutive
error
increase, it will affect the
TB
occurs,
this parameter
service
quality.
can be set toSuggestion:
0.
Adjustment
If
to increase
If there
there is
is need
no need
to increase
the
SIR
target
increasing
the SIR target increasing step
step
size
size when
when consecutive
consecutive error
SIR
TB
occurs,
this parameter
target
increasing
occurs, this
can
be
set
to
(ortoelse
parameter can0.1dB
be set
0.
value).
If there is need to increase
Fixed-keep
monitoring
No
N/A
Don't Care
No
N/A
Network
Planing&Optimi No
zation
YES
Network
Planing&Optimi No
zation
YES
Fixed-keep
monitoring
No
Yes
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Don't Care
No
N/A
target.
Configuration
Rule: ItThis
needs
Parameter Function:
to
consider
the
service
parameter indicates thequality
and
systemstep
capacity.
maximum
size of
If
the
parameter
valueSIR
is too
increasing the uplink
large, the SIR target
target.
increasing
stepRule:
size Itwill
be
Configuration
needs
too
big
when
consecutive
to consider the service quality
error
TB or consecutive
and system
capacity. SIR
target
increasing
occurs.
If the parameter value
is too
Accordingly,
it
will
improve the
large, the SIR target
service quality
affect
the
increasing
stepbut
size
will be
system
capacity.
too
big
when
consecutive
Parameter
function:
theis too
If
the TB
parameter
value
error
orthe
consecutive
switch
for
function
ofSIR
the
small,
the SIR target
target
increasing
occurs.
Call
Re-establishment
in
increasing
step
size
will be the
Accordingly,
it will
improve
specified
call-flow.
Parameter
Function:
This
not
big
enough
when
service
quality
but affect
the
Parameter
controlling
factor:
parameter
indicates
the
consecutive
error
TB
or
system
capacity.
function
on
or
off,
cell
call
reswitch
of using
POWER
Parameter
function:
theis too
consecutive
SIRDL
target
If
the parameter
value
establishment
success
ratio.
CONTROL
REQUEST
switch
for the
function
of the
increasing
occurs.
small,
the
SIR
target
Parameter
Function:
This
If
on,Re-establishment
then
the
call
may
be
information
init Iur
Interface
to
Call
innot
Accordingly,
will
improve
the
increasing
step
size
will
be
parameter
indicates
the
offset
dropped
as
far
as
possible
by
control
power
balancing.
specified
call-flow.
system
capacity
but affect the
not
big
enough
when
of
CPICH
Ec/No
in Iur
call
re-establishment
Configuration
Rule:
The
value
Parameter
controlling
factor:
service
quality.
consecutive
error
TBthe
or
interface
relative
to
procedure.
of
this parameter
should
function
on
or
off,
cell
call
reconsecutive
SIR
target
CPICH
Ec/No
of
If
off, then
the
call
can
be
consider
the
radio
link quality
establishment
success
ratio.
increasing
occurs.
measurement
result.
The
released
asthe
soon
as
possible
of
thethen
service
in
DRNC.
If
on,
call
may
not the
be
Accordingly,
it in
will
improve
CPICH
Ec/No
Iur
interface
and
user
experience
may
be
When
the
switch
is
on,
DRNC
dropped
as
far
as
possible
by
system
butCPICH
affect the
is
calculated
by the
better.
send
thecapacity
DL POWER
call
re-establishment
service
quality.
Ec/No
of
UE
measurement
CONTROL
procedure. REQUEST
result
minus
information
tothis
Node
B which
If off, then
the
calloffset.
can
be
Configuration
Rule:
value
is
same
with
the
POWER
released as soonDL
asThe
possible
of
this
parameter
should
CONTROL
REQUEST
and user experience may be
consider
radioby
link
quality
information
SRNC
better. thesend
of
the service
in DRNC, and it
through
Iur interface.
also
needs
to avoid
the DRNC
When
the switch
is off,
power
wasting.
would discard the DL
If
this parameter
is too small,
POWER
CONTROL
Function:
Switch
PSradio
the
initial power
ofofthe
REQUEST
information
send
Sevice
Channel
Allocation
link
in DRNC
will be
by SRNC
through
Iurtoo big,forit
Concurrent
CS+PS.
is
a power wasting.
interface.
Configuration
If the
CS
If
this
parameter
is radio
too
big,
If the quality ofRule:
the
link
call
drop
ratio
is
high
when
the
initial
power
of
the
radio
Function:
Online-already
in DRNC is bad for using the
concurrent
CS+PS,
link
in DRNC
willbalancing
be the
small, it
Service
Reconfiguration
downlink
power
parameter
can
be
set to 'On',
might
affect
theofservice
Method
for UE
Release
6
parameters
from
SRNC,
even
but
itafter
may
influence
the
user
quality.
and
When
make
callRelease
drop
rate6 rise,
then
experience.
Adjustment
Suggestion:
Multi-RAB.
this switch can
be turnedIfoff.
there are some
problems,
Configuration
Rule:
If there is
such
as call drop,
which are
no
compatibility
problem
with
because
the initial power
UE,
it is recommended
to of
be
radio
in DRNC
is too
"0:
RBlink
setup
method",
it can
small,
this parameter
reducethen
the reconfiguration
can
be
configured
with a
messages on UU interface.
N/A value.
bigger
Don't Care
No
N/A
The reserved parameter is

used to config "Max Number
of Satelite Info in
measurement control
meassage " in this version.
Value range is 1 to 16
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed-keep
monitoring
No
N/A
Fixed
No
YES
Don't Care
No
N/A
Function:
Throughput
N/A
Threshold of Event 4A/4B for
E-DCH.
experiences and utilization
N/A
ratio of radio resources.
The smaller the threshold of
event 4A is , the faster
make to user's demand , and
N/Afaster that system will
the
increase the bandwidth, and
the better the user
experience is, but it also
easier to result in a waste of
radio
N/A resources because of
unnecessary
Function: Thisbandwidth
parameter
increase;
TheCpich
largerEc/N0
the
indicates the
threshold
of
event
4A
is , the
threshold for blind handover
slower
response
that system
in
procedure
of directed
retry
will
make by
to user's
demand,
triggered
inter-RAT
and
the slower
that system
balancing.
If reported
Cpich
Function:
This
parameter
will
increase
the
bandwidth,
EcNo
of
source
cell
is
less
indicates
the
the
worse
theCpich
user RSCP
than
or
equal
to
threshold
foris;blind handover
experience
DREcNoQualThrd
, blindretry
in
procedure
directed
The largerwill
theof
threshold
of
handover
not
be
triggered
by
inter-RAT
event
4B is, the faster
triggered.
balancing.
If reported
response
that
system Cpich
will
Parameter
controlling
factor:
Rscp
of
source
cell is less
make
to
user's
demand,
and
user
experience
and network
than
or equal
to
the
faster
that
system
will
feature
DRRscpQualThrd
, blind but
This
configured
according
decrease
the bandwidth,
Whenis inter-RAT
balancing
, if
handover
will
not
be
Operater's
requirement.RNC
it also
easier toisresult
this
parameter
smallin, UE
triggered.
Location
Mode
needn't
add
unnecessary
bandwidth
will
blind handover
more
Parameter
controlling
factor:
SAS
but
it
will
increase
RNC
increase
and
influence
user
easily
and may drop
the
call.
user
experience
and
network
CPU
load
by
location
experiences;
The
smaller
the
Oherwise
,
the
UE
will
blind
feature
sevice.SAS
Location
Mode
threshold
of
event
4B
is,
the
hanover
hard. balancing , if
When
will
addinter-RAT
IUPC interface
slower
response
that system
this
parameter
is small
UE
between
and
SAS, which
will makeRNC
to user's
demand,
will
blind
handover
more
will increase
message
volume
and
the slower
that system
easily
and may
drop
the call.
on
IUPC.In
SAS
Location
will
decrease
the
bandwidth,
Fucntion:
switch
of will
strategy
Oherwise
, the
UE
blind
Mode,
position
method
and
itforwill
make
thefrequency
utilization
ratio
VIP
carrier
hanover
hard.
position
calculation
is
in SAS,
of radio resources
Configuration
Rule:low.
This
which
also should
decrease
parameter
be RNC
set
CPU
load.
deployment.
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Don't Care
No
N/A
Network
Planing&Optimi No
zation
Yes
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Fixed
No
N/A
Parameter Function: maximal

allowed
CScarrier
user
Fucntion:Non-VIP
Downlink
number
when
VIP
user
central frequency of VIPdose
not
exist
Configuration
Rule: This
Configuration
Rule:beVIP
parameter should
setusers
performance,
non-VIPmaximal
user
according toFunction:
operator
network
Parameter
performance
deployment.
allowed
Non-VIP PS user
The
larger
of the
number
when
VIPparameter,
user dose
the
more
Non-VIP
users can
not exist
be
online
in
the
cell
when
VIP
Configuration Rule: VIP
users
does
not
exist
and
the
less
performance, non-VIP user
probiability that VIP preempt
performance
Parameter
Function:smaller
maximal
Non-VIP
users;
of
The
larger
of thethe
parameter,
allowed
Non-VIP
CS
user
the
parameter,
the
less
Nonthe
morewhen
Non-VIP
usersexists
can
number
VIP
user
VIP
usersin
can
be
online
inVIP
be
online
the
cell
when
Configuration
Rule:
VIPnot
users
the
cell
does
notwhen
existVIP
anddoes
the user
less
performance,
non-VIP
exist
and the
more
probiability
that
VIPprobiability
preempt
performance
Parameter
Function:
maximal
that
VIP preempt
Non-VIP
Non-VIP
users;
the
smaller
of
The
larger
of
the
parameter,
allowed
Non-VIP
PS
user
users;
the
parameter,
the
less
Nonthe
morewhen
Non-VIP
usersexists
can
number
VIP
user
VIP
usersin
can
be
online
inVIP
be
online
the
cell
when
Configuration
Rule:
VIPnot
users
the
celland
when
exists
theVIP
lessdoes
probiability
performance,
non-VIP
user
exist
andpreempt
the moreNon-VIP
probiability
that VIP
performance
that
VIP
preempt
Non-VIP
Parameter
Function:
The
users;
the
smaller
of
the
The
larger of the parameter,
users;
parameter
indicates
wating
parameter,
the
less
Non-VIP
the more Non-VIP users can
time
length
for
CELL
users
canin
be
online
in the VIP
cell
be online
the
cell when
UPDATE
after
RNC
sending
when
VIP
exists
and
the
more
Parameter
Function:
overload
exists and the less probiability
Radio
Link
Deactivation
probiability
that VIP
preempt
control
strategy
switch
for VIP
that VIP
preempt
Non-VIP
command
after
RBofVIP
Non-VIP
users;
Configuration
Rule:
users; the smaller
theusers
performance,
user
parameter, thenon-VIP
less Non-VIP
se
Response
Timer in the cell
performance
users
can be online
Expiration..
When
the exists
switchand
is on,
when VIP
theRNC
more
Configuration
Rule:
It
needs
will
handover
non-vip
user
probiability that VIP preempt
to
consider
the real radio
exceeding
threshold
to nonNon-VIP
users;
condition.
VIP carrier frequency to
The
bigger
paramter is ,
provide
VIPthe
performance.
the higher the probability of
receiving CELL UDPATE is,
howerver, to the service with
lower transfer delay, the
interruption time of the
setting
transport
service according
is more longer.
quality
he smaller the paramter is ,
the lower the probability of
receiving CELL UDPATE is,
The
biggertothe
is,
howerver,
theparameter
service with
the
better
the
UTRAN
can
lower transfer delay, the
avoid
the cell
outof
ofthe
service
interruption
time
for
NCP
break
when
ATM
Parameter
function:
specifies
service is more shorter.
transport
. type which needs
the service
the
function.
TheMR
bigger
the parameter is,
Parameter
controlling
the better the
UTRAN factor:
can
MR
data
size,
service
avoid the cell out
of service
coverage.
for NCP break when IP
The
parameter
value with
transport
.
"include CS" means that only
the UEs running CS service
can be started MR
acquisition. It helps to reduce
the MR data size.
The parameter value with
"Any service" means that all
the UEs no matter running
CS or PS service can be
started MR acquisition. It can
maximize the service
coverage in the MR
acquisition.
Default Value Configuration Reason
Change take
effect
Equipment
Impaction
Level
Service or
Node Impact
according to the faculty of processing

FACH DATA FPs in a related NodeB.
Immediately

FACH DATA FPs in a RNC.
Immediately
according to the transport delay from a

SRNC to a related NodeB that ATM/IP is New Session
usually be used.
according to the transport delay jitter

from a RNC to a related NodeB in which
New Session
the external neighboring cell of the
SRNC is configured.

FACH DATA FPs in a related NodeB.
Immediately

Immediately

PCH DATA FPs in a related NodeB.
Immediately

Immediately
Packets of IU service are defined by CN

New Session
is preferred.
460 is the MCC of CHINA
Can't Modify
Can't Modify
None
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
This parameter should be set according

New connection N
to operator network deployment.

New connection N

New connection N

New connection N

New connection N

New connection N

New connection N
UE capability is taken into account in

default value.
New connection N

New connection N

New connection N

New connection N

New connection N
The default value is deicided by the

factor that the dedicated carrier sharing
is mainly used
New users
N/A
New users
N/A
New users

factor that no network sharing is used in New users
most networks
N/A
Can't Modify
Can't Modify
N/A
New users
Default value is set to "Not Support",

which should be adjusted according to
the actual supported diversity mode of
the neighboring cell of DRNC.
Default value is set to "Support", which
should be adjusted according to the
actual CPC DTX-DRX capability of the
At next
judgment (i.e.,
shall not affect
ongoing
connections)
At next
judgment (i.e.,
shall not affect
ongoing
connections)

actual CPC DTX-DRX capability of the
At next
judgment (i.e.,
shall not affect
ongoing
connections)
The default value is to save

transmission resource.
Next Radio Link

Add Request
N
Over Iur
The default value is to ensure best

compatiablity
Next Radio Link

Add Request
N
Over Iur

the actual DL 64QAM capability of the
At next
judgment (i.e.,
shall not affect
ongoing
connections)

New connection N
Default value is set to "IR and Chase

Combining Capable", which should be
adjusted according to the actual E-DCH
HARQ combining capability of the
At next
judgment (i.e.,
shall not affect
ongoing
connections)
At next
Default value is set to "2SF2 and 2SF4",
judgment (i.e.,
shall not affect
the actual E-DCH SF capability of the
ongoing
connections)
At next
Default value is set to "Supported",
judgment (i.e.,
shall not affect
the actual E-DCH TTI capability of the
ongoing
connections)
N/A
Take effect for

the next call
N/A
Take effect for

the next call
the desault value is "0: closed" and

should be set according to operator's
requirement.
Immediately

New connection N
In general, HSPA capability will be

support.

New connection N
At next
Default value is set to "160 subframes",
judgment (i.e.,
shall not affect
the actual Max UE DTX Cycle capability
ongoing
of the neighboring cell of DRNC.
connections)
New connection N

New connection N

New connection N
UE capability is taken into account in

default value.
When best cell

is changed
N/A
Take effect for

the next call
N/A
Take effect for

the next call
N/A
New users
The default value is configured by

network planning & optimization
engineer based on the actual
requirement of coverage and system
capacity.
The P-CPICH power usually is 33dBm
when cell maximum power is 43dBm.
Immediately
The default value is configured by the

engineer based on the situation.
At present, the pathloss of neighboring
cell not need to be calculated for intrafrequency or intra-frequency
measurement, so the default value of
this parameter is "False".
factor that the dedicated carrier sharing
is mainly used
Immediately
New users
Take effect after

the the system
N
information is
updated

New connection N

New connection N
not used parameter
N/A
not used parameter
N/A

New connection N
N/A
N/A
New users

most networks

At next use
The feature of most RNCs and NodeBs

is not stable, so it is configured to "not
New Session
support".
N/A
at next use

At next use
N/A
New users
The default value is decided by the

mobilty of UE and the complexity of
network planning
New users

New connection N

Can't Modify
Can't Modify

At next use
N/A
Can't Modify
Can't Modify
The default value corresponds with the

ZTE-CN default value
At next use (i.e.,

shall not affect
N
ongoing
connections)

At next use (i.e.,

shall not affect
N
ongoing
connections)
The default value is considering all

factors: the timer interval of the NODEB
Immediately
sending audit response periadly; system
cost.
Combination of soft handover is

considered to define this default value.
New connection N
None
Can't Modify
Can't Modify
The parameter should be set to

"General NodeB"
Immediately
The feature of most RNCs and NodeBs

is not stable, so it is configured to "not
New Session
support".
according to the transport delay from a

RNC to a related NodeB that ATM/IP is
usually be used.
Immediately to
cell.
New Session
according to the transport delay jitter

from a RNC to a related NodeB that
ATM/IP is usually be used.
Immediately
N/A
immediately
N/A
immediately
N/A
immediately
N/A
immediately
The default value is the normal choice.
Immediately
N/A
immediately
The default value is comprehensively

set by the success rate and time delay
of the RRC connection release.
immediately

factors: The probability of UE receiving
RRC CONNECTION RELEASE; the
number of RRC CONNECTION
RELEASE message; system cost.
apply when
RNC send RRC
N
CONNECTION
RELEASE
N/A
immediately
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
MCC for China
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
MCC for China
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify

New connection N
to actual network scenario.
N/A
Take effect after

the change is
N
loaded to the
RNC
PRE-R6 need know this PLMN
New users
It should be set according to the

requirement to bar the AC manually.
Take effect after

the change is
N
loaded to the
RNC
N/A
immediately
N/A
Take effect for

the next call
N/A
immediately

The outfield should considering all
factors: the actual capability of the cell;
request of the operator.
Immediately
N/A
immediately
N/A
After cell resetup
The default value is configured by the

Network Planning&Optimization
engineer based on the situation.
Immediately
N/A
Immediately
N/A
Immediately
N/A
Immediately
N/A
Can't Modify
Can't Modify
N/A
After cell resetup
Take effect for

the next new RL
In order to recovery the radio link in the
after the CELL
out-of-sync state in time, the parameter
RECONFIGUR N
is set to relatively small value but not 1
ATION
to avoid the Ping Pang state transition.
REQUEST
Take effect for
The time length determined by this
message
the next new RL
parameter and TRIFailure shall not be
after the CELL
smaller than the time length determined
RECONFIGUR N
by N313 and T313 so that the UE can
ATION
trigger the radio link failure procedure
REQUEST
before NodeB.
message

factors: the propability of paging
success; the propablity of resourece
congestion.
apply when
RNC send
paging
When system
The default value is TRUE, and is get by
information is
test result of outfeilds.
changed
No RAN Sharing in used
The system information block type 6

contains parameters for the
configuration of the common and shared
physical channels to be used in
No effect
connected mode. PRACH parameters
are most frequently used when UE is in
IDLE mode, so the default value is set
to "False"
N/A
immediately
N/A
immediately
N/A
Can't Modify
Can't Modify
N/A
N/A
N/A
immediately
N/A
New user or
new RL
N/A
Immediately
New users
None
Immediately
The defafalt value is false, becase most

cell doesn't support this function. The
Immediately
paramter should set by the actual
capabitity of the cell.
None
Immediately
N/A
Immediately
N/A
Immediately
N/A
immediately
the Probability of PLMN is equivalent
New users
It should be set according to the

requirement to bar the AC manually.
Take effect after

the change is
N
loaded to the
RNC
The default value is FALSE, because in

default seting parameters, the FACH
measurement occasion info and
Immediately
Measurement control system
information is same in connected mode
and in idle mode.
default seting parameters, the Cell
selection and re-selection info and Cell Immediately
Access Restriction is same in connected
mode and in idle mode.
default seting parameters, the common
physical channel informaiton and
Immediately
frequency information is same in
connected mode and in idle mode.

Can't Modify
to network deployment.
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
This parameter should be set according When best cell

is changed
N/A
New Session
N/A
Can't Modify
N/A
New Session
N/A
New Session
N/A
Can't Modify
N/A
Can't Modify
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
New Session
N/A
Can't Modify
N/A
Can't Modify
N/A
New Session
N/A
New Session
N/A
New Session
N/A
New Session
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify

most networks
The default value is suggested by 3GPP

Immediately
protocol
N/A
Can't Modify
Can't Modify
N/A
Immediately
N/A
Can't Modify
Can't Modify
Usually, the cell is of single antenna.
Take effect after

related
Common
Transport
Y
Channel is
deleted and
setup again.
configure two Prach parameters to R99

Prach and Common E-DCH
Immediately
In order to save the downlink

channelization code resource
When system
information type
5 is
changed.and
N
Take effect after
the Physical
shared Channel
Reconfiguration
The equipment is one antenna, it does

not support MIMO
Immediately
N/A
Immediately
N/A
Immediately
Consider the load of Iu and the

signalling connection of Uu in other
frequencies/systems
When system
information type N
3 is changed
Consider the load of Iu and the

signalling connection of Uu in other
frequencies/systems
When system
information type N
3
is changed
When
system
information type
5 is
changed.and
Take effect after N
the Common
Transport
Channel
Take
effect after
Reconfiguration
AICH is deleted
Y
and setup
again.
Make use of the available subchannel

resource of PRACH and the cell radius
always is above 200km
Usually, the cell radius is smaller than

120Km.
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Take effect after

AICH is deleted
Y
and setup
again.
Take effect after

AICH is deleted
Y
and setup
again.
Take effect after

The spared codes may be enough for a
the change is
CS64k service or 4 AMR services or 8
N
loaded to the
HSDPA associated DPCH.
RNC
Take effect after

The spared codes may be enough for a
the change is
CS64k service or 4 AMR services or 8
N
loaded to the
HSDPA associated DPCH.
RNC
The throughput of one HS-PDSCH is

about 700kbps in the lab test.
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
It shoulde be set to 1 unless fixed

number of HS-PDSCH is required to
allocate to HS-PDSCH by the operator.
1 E-AGCH can schedule 16-25 HSUPA
users and save the channelization code
resource. It shoulde be set to
(EdchTrafLimit/16-25) if EdchTrafLimit is
required to support.
1 E-RGCH/HICH can schedule 20
HSUPA users and save the
channelization code resource. It shoulde
be set to (EdchTrafLimit/20) if
EdchTrafLimit is required to support.
5 can satisfy the throughput requirement
quickly and also will not occupy too
much code to increase the possibility of
DPCH code congestion.
R99+HSDPA: Two users could be
scheduled at the same time to make the
best use of HS-PDSCH. And the codes
allocated to HS-SCCH are not too much
to affect other services.
HSDPA: 3 provides better experience for
the HSDPA users.
make sure the ratio of service drop
N/A
Take effect after

the
is
Takechange
effect after
loaded
to
the
the change is
RNC
loaded to the
RNC and the
PHYSICAL
SHARED
Take effect after
CHANNEL
the change is
RECONFIGUR
loaded to the
ATION
RNC and the
REQUEST
PHYSICAL
message is sent
SHARED
to
NodeB
CHANNEL
RECONFIGUR
ATION
REQUEST
Take effect after
message
is is
sent
the
change
to
NodeB
Take
effect
after
loaded
to the
the
RNCchange is
loaded to the
RNC and the
PHYSICAL
SHARED
CHANNEL
RECONFIGUR
ATION
REQUEST
Take
effect
message
is after
sent
the
change
to NodeB is
loaded to the
RNC
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
2 second can satisfy the HSDPA service

throughput requirement and will not
change the HS-PDSCH number too
frequently.
Take effect after

the change is
N
loaded to the
RNC
It is enough to change the HS-PDSCH

number on a second level.
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect for

the next call
Take effect for

the next call
New
CAC(Service
Setup,
handover or
Service
reconfiguration
Take effect for

the next call
N/A
Take effect for

the next call
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
If cell supporting Enhanced Layer 2
function or DL Enhanced CELL_FACH
existed in the RNC, this parameter must
be set to "open"; else, this parameter
can be set to "open" or "closed";
Enhanced Layer 2 function can improve
the cell Iub throughput and suggested to
be set to "support" as soon as the
equipment supports.
N/A
The default value is set according to the

Immediately
compute load of RNC
It is set according to the compute load

of RNC.
New Session
N/A
Immediately
N/A
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Immediately
It is set according to the compute load

of RNC and the power of SCCPCH in
MBMS service.
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
make sure Common Physical Channel

ID is unique for one common physical
channel within a cell
Can't Modify
Can't Modify
Considering the capacity requirement of

the MICH notification and downlink
Immediately
power resource.
Take effect after

related
Common
Transport
Y
Channel is
deleted and
setup again.
Take effect after
Usually, it should be set to "Not sharing"
the change is
unless the operator required to use this
N
loaded to the
function.
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the cell is
Y
deleted and
setup again.
Take effect after

the cell is
Y
deleted and
setup again.
Take effect after

the system
N
information is
updated
Take effect after

the system
N
information is
updated
Take effect after

the system
N
information is
updated
Take effect after

the system
N
information is
updated
Take effect after

the Common
There is only one PRACH defautly so all
Transport
N
the subchannels are available.
Channel
Reconfiguration
N/A
Usually, it is not necessary to

differenciate the priority of AC11-AC15
with AC0-AC9. AC10 is used for
emergency call, so it is usually mapped
to ASC0 which is of the highest priority.
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
Take effect after

Usually, it is not necessary to restrict the the system
N
UE transmitting PRACH preamble.
information is
updated
40 times enable UE increase the

PRACH preamble power as much as
possible and will not increase the
access delay too much.
Take effect after

the system
N
information is
updated
In order to reduce the RACH delay and

increase the RACH access possibility,
the value is set to 6.
Take effect after

the system
N
information is
updated
3 is enough to differenciate the priority

of different AC and will not waste too
much bit in the SIBs.
Take effect after

the change is
N
loaded to the
RNC
There is only one PRACH defautly so

the first scrambling code is allocated.
Take effect after

PRACH is
Y
deleted and
setup again.
It is the field test results that can satisfy

the RACH message part demodulation
requirement and UE Tx power will not
increase to too much high value.
Take effect after

PRACH is
Y
deleted and
setup again.
The default value of this parameter has

considered the system demand on the
timeliness of accessing system and cell
capacity.
Take effect after

the system
N
information is
updated
Take effect after

the system
N
information is
updated
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the system
N
information is
updated

PRACH configurationi for RRC
Connected Mode and Idle Mode is the
same, so it is not necessary to
broadcast SIB6.
Take effect after

There is only one PRACH defautly so all the Common
the signatures are available to reduce
Transport
Y
the collision probability.
Channel
Reconfiguration
Take effect after

the cell is
Y
deleted and
setup again.
N/A
Can't Modify
Can't Modify
N/A
Take effect for

the next call
N/A
Take effect for

the next call
AMR 12.2kbps is most frequently used.

And other AMR modes can be set to
"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call

"Not used".
Take effect for

the next call
Usually, the benefit of AMR rate

adjustment for the capacity is not so
great.
Take effect for

the next call
WB AMR 12.65kbps/8.85kbps/6.6kbps
Take effect for
is most frequently used. And other AMR
the next call
modes can be set to "Not used".
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
Take effect for
the next call
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
Take effect after

the cell is
Y
deleted and
setup again.
It is set to 60 seconds to reduce the

RNC burden, because DSAR function
will update the system information for all
the cells periodically.
Take effect for

the next new
DSAR
procedure
In order not to affect the user

experience too obviously, 2 is set to the
default value.
Take effect after

the change is
N
loaded to the
RNC
The default value turn off the cell bar

function. If the cell bar funtion is
required to start, 1 or 2 should be
selected according to configuration rule.
Take effect after

the change is
N
loaded to the
RNC
Take effect for

It could be set to 1 if the DSAR function the next new
is paid, otherwise it should be set to 0. DSAR
procedure

default value.
Take effect after

the change is
Y
loaded to the
RNC
N/A
Take effect after

the change is
Y
loaded to the
RNC
It could be set to 1 or 2 if the DSAR

function is paid. 1 should be selected if
starting DSAR manually is required. 2
should be selected if starting DSAR
according to the Iu load level is required.
Take effect after

the change is
Y
loaded to the
RNC
N/A
Take effect for

the next call
N/A
Take effect after

the cell is
Y
deleted and
setup again.
P-CPICH+P-CPICH is compatible for

most of the cases.
Take effect after

the change is
Y
loaded to the
RNC
N/A
N/A
N/A
Take effect after

Takechange
effect after
the
is
the
cell to
is the
loaded
Y
deleted
and
RNC if the
setup
again.
parameter
"CellReestabInd
" is set to " Not
Reestablish".
Y
Take effect after
the cell is
deleted and
setup
againafter
if
Take effect
the change
parameter
the
is
Y
"CellReestabInd
loaded to the
"RNC
is set to
"Reestablish".
The paging response should be

restricted as the initiating a call is
restricted.
Take effect after

the system
Y
information is
updated

default value.
Take effect after

the change is
Y
loaded to the
RNC
N/A
Take effect after

the change is
Y
loaded to the
RNC
It could be set to 1 or 2 if the DSAR

function is paid. 1 should be selected if
starting DSAR manually is required. 2
should be selected if starting DSAR
according to the Iu load level is required.
Take effect after

the change is
Y
loaded to the
RNC
Take effect after

Usually, it is not necessary to support S- the cell is
Y
CPICH.
deleted and
setup again.
N/A
N/A
Take effect for

the next new RL
after the CELL
RECONFIGUR N
ATION
REQUEST
message
Take effect after
the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Can't Modify
The IDs of UE internal measurements

are planned and set carefully. Do not
change the settings.
Take effect after

the change is
N
loaded to the
RNC

Take effect after

the change is
N
loaded to the
RNC

Take effect after

the change is
N
loaded to the
RNC

Take effect after

the change is
N
loaded to the
RNC

Take effect after

the change is
N
loaded to the
RNC

Take effect after

the change is
N
loaded to the
RNC
Can't Modify
Dedicated measurement type should be Next

choosed according to the usage of the measurment
dedicated measurement.
control
Default value is decided according to

Next
the the measurement type and event of measurment
the dedicated measurement.
control
Next
measurment
control
Next
measurment
control
Next
According to the corresponding function
measurment
of the dedicated measurement.
control
According to the contribution to the

system load and the timeliness of the
measurement report.
Next
measurment
control
Function: This parameter indicates the

time unit of measurement report
transmitted by Node B.
Configuration Rule:
Next
measurment
control
According to the the measurement type Next

and event of the dedicated
measurment
measurement.
control
The actual application is considered to

define this default value.
Take effect after

the change is
N
loaded to the
RNC
The paramter setting is based on how

many events will be used.That is to say,
Event number is defined by
This parameter is not suggested to be
adjusted.
Take effect after

the change is
N
loaded to the
RNC
Measurement Quantity matches the

function which use the Measurement
Quantity.
Take effect after

the change is
N
loaded to the
RNC
Considering whether it can correctly and

timely reflects the condition when SIR
cannot converge to the SIRtarget
because of deterioration of radio
condition.
Consider the filtering effect and the
timeliness of the measurement report.
Default is 2 means current
measurement and previous
measurement has the weight of 50%
separately.
Accurate of transmit and system

capacity are considered to define this
default value.
Take effect after

the change is
N
loaded to the
RNC
The reason of the parameter's default

value is to consider the utilization ratio
of radio resource and the user
experience.
Take effect after

the change is
N
loaded to the
RNC

experience.
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the change is
N
loaded to the
RNC
Take effect after

the change is
N
loaded to the
RNC
Take effect after

It is optimised in the field of Austria. It is the change is
N
not suggested to adjust.
loaded to the
RNC
Take effect after

The default value has not been
the change is
optimised in the field, so the value is set
N
loaded to the
to the minimum value.
RNC

Take effect after

the change is
N
loaded to the
RNC
It is not recommended to change the

index of UE internal measurement.
Take effect after

the change is
N
loaded to the
RNC

of radio resource.
Normally, the functions of PS and AMR
service rate adjustment according to the
UE Tx power are on and the funtions
requiring the other measurments are
switched off , so the measurement of
UE
Tx power
reportedofdefaultly
Normally,
the is
functions
PS and and
AMR
the
other
measurements
are
not to the
service rate adjustment according
reported
defaultly.
UE Tx power
are on and the funtions
requiring the other measurments are
switched off , so the measurement of
UE Tx power is reported defaultly and
the other measurements are not
reported
defaultly.
The reason
of the parameter's default
experience.
It is set to the max value to guarantee

the MIMO users' experience.
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
N/A
The default value is 1: Avoid CN

sending unnecessary call to UE.
The default value is 2: CS +PS.The

value should be set according the
supported CN domains of the PLMN
Take effect after

the
is
Takechange
effect after
N
loaded
to
the
the change is
RNC
loaded to the
RNC and the
NodeB must
support the
N
function of
dyanamically
allocate the HSPDSCH code
based on
Immediately
N
NodeB
Immediately
The default value consider all these

factors: power consumptive of the UE;
When system
system cost because of too much
information is
paging; the rate of the UE response with changed
the paging message.
None
Immediately
When system
information is
changed
At next use
The default value consider all these

factors: power consumptive of the UE;
When system
system cost because of too much
information is
paging; the rate of the UE response with
changed
the paging message.

factors: The network can get the
location of the UE in time; The timer
should be smaller than the timer of
periodic position updates in CN side;
system cost.
set by the round-trip time delay between
UE and UTRAN, and the success rate
and time delay of the status tranfering.
Immediately

factors: the process time of one
congestion control; the time of the user
can wait to access the UTRAN; system
cost.
apply when UE
receives RRC
N
CONNECTION
REJECT.
N/A
Can't Modify
Can't Modify
Reserved parameter, default value

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately
The default value is considering to bring

New connection N
the user better feeling.
Default value equal 20 minute
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately
Default value equal 0
Immediately

equal 0
Immediately
Reconfigure HSUPA OLPC prameters

when E-DCH user number change is
priority.
Immediately
Immediately
Immediately
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
At next
judgment (i.e.,
shall not affect
whether the operator has purchased the
ongoing
CPC license for the cell.
connections)

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately

equal 0
Immediately
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
N/A
Can't Modify
At next use (i.e.,

The default value is300ms, and is get by shall not affect
N
test result of outfeilds.
ongoing
connections)

Can't Modify
Can't Modify

Can't Modify
Can't Modify
The default value is 2, considering all

RRC CONNECTION SETUP; the
Immediately
number of RRC CONNECTION SETUP
message; system cost.
The default value is 700ms, considering
all factors: The probability of UE
receiving RRC CONNECTION SETUP; Immediately
the number of RRC CONNECTION
SETUP message; system cost.

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

Can't Modify
Can't Modify

New connection N
The default value is the normal mode.
Immediately
None
Immediately
None
Immediately
N/A
Can't Modify
Can't Modify
None
Immediately
Can't Modify
Can't Modify
Immediately
N/A
Can't Modify
N/A
Immediately
N/A
Can't Modify
Can't Modify
N/A
N/A
N/A
N/A
N/A
New users
The default value is 3s, considering all

factors: cost time of obtaining physical
layer synchronisation, the feeling of
user, wait time to Re-establishment the
service.
layer Out-of-Sync, the feeling of user,
wait time to Re-establishment the
service.

New users

New users
Immediately
Immediately
Immediately
Immediately
Immediately
The default value is off. Almost NODEB

Immediately
doesn't support the function.

At next use (i.e.,

shall not affect
N
ongoing
connections)

At next use (i.e.,

shall not affect
N
ongoing
connections)

At next use (i.e.,

shall not affect
N
ongoing
connections)

layer synchronisation, the feeling of
service.
layer Out-of-Sync, the feeling of user,
wait time to Re-establishment the
service.
layer synchronisation B, the feeling of
call.
factors: cost time of transmission the RB
Setup/Reconfiguration/Release
message to UE, handling time of UE,
the feeling of user, wait time to Reestablishment the call.
RRC CONNECTION SETUP; handling
time of UE, the feeling of user.

set by the round trip time between UE
and UTRAN, the MEASUREMENT
CONTROL FAILURE message number
in Uu interface.
At next use
in most networks, CN don't implentment

PS and CS domain registration
New connection N
coordination
3.4k is normal signal type.
New connection N
The fast reconfiguration scene is

unusual.
New connection N
The paramter should set by the actual

Uu interface.
New connection N
The default value is mainly set by the

rate of the signal, the time of RNC and
New connection N
UE and NODEB dealing with the
procdure, delay in Iub interface, delay in
Uu interface.
rate of the signal, the time of RNC and
UE and NODEB dealing with the
New connection N
procdure, delay in Iub interface, delay in
Uu interface.
no iuflex is used by default, and this

parameter need to be negotiated with
CN
New users

CN
New users

CN
New users

CN
New users

to network planning.
is changed

is changed

is changed

is changed

is changed

is changed
Cell capability, UE capability, and

throughput are taken into account in
default value.
At next use
Cell capability, UE capability, and

default value.
At next use
The risk of ping pong handover and

default value.
At next use
HO success rate is considered to define When best cell

this default value.
is changed

this default value.
is changed
The actual application is considered to

When best cell

is changed
Normal mobility scenario and HO

success rate are considered to define
this default value.
When best cell

is changed

is changed
HO scenario, measurement quantity and

report type are considered to define this Can't Modify
default value.
3GPP definition is considered to define

this default value.
When best cell

is changed
Measurement purpose is considered to

When best cell

is changed
Measurement accuracy is considered to When best cell

is changed

this default value.
is changed

this default value.
is changed
Proper macro gain and soft HO times

are considered to define this default
value.
When best cell

is changed
System capacity is considered to define When best cell

this default value.
is changed
Proper macro gain is considered to

When best cell

is changed
Proper soft HO ratio, soft HO success

When best cell
rate and system capacity are considered
is changed
to define this default value.
Average HO times and HO success rate

When best cell
is changed
value.
Normal mobility scenario and HO

this default value.
When best cell

is changed
HO success rate is mainly considered to When best cell

is changed
N/A
Can't Modify
Call-drop rate is mainly considered to

Immediately
N/A
Can't Modify

is changed

Immediately
to actual scenario.
At next use (i.e.,

shall not affect
N
ongoing
connections)


At next use (i.e.,

shall not affect
N
ongoing
connections)

At next use (i.e.,

shall not affect
N
ongoing
connections)
when inter-RNC
network planning parameter, no default
handover
N
value(secondary cell Identity for DC cell)
happen
it's set according to the cell DC

capability

value(MCC)

value(network sharing parameter)

value(MNC)

value(network sharing parameter)
Immediately
New
CAC(Service
Setup,
handover or
Service
reconfiguration
New
CAC(Service
Setup,
handover or
Service
reconfiguration
New
CAC(Service
Setup,
handover or
Service
reconfiguration
New
CAC(Service
Setup,
handover or
Service
reconfiguration
Mobile Country Code
Can't Modify
Can't Modify
Mobile Network Code
Can't Modify
Can't Modify
RateSeg for mapping BP(Basic Priority).

For mapping BP, all the combination of
Immediately
ARPSeg valid value, TrafficClass valid
value must be set, and is not adjustable.
It's a Qos parameter and should be set

according to the operator's requirement.
The default value setting rules: the
higher of ARPSeg with same traffic
class, the higher of BP; the higher
priority of traffic class(C>S>I(the less of
It's
Qos parameter
should be set
THPa value,
the higherand
of THP
according
the same
operator's
requirement.
priority)>B)towith
ARPSeg,
the
The
default
value
come from
higher
of BP.If
the is
operator
has CSL's
no
requirement
HK. If the operator
has
specific Qos in
requirement,
the default
no
specific
Qos
requirement,
the
default
value can suit the ordinary qos
value
can be used in ordinary network.
requirement.
his
parameter
support type
TrafficClsss
forindicates
mappingthe
BP(Basic
of
RLC
PDU
size
format
for
Priority). For mapping BP, allsignaling
the
and
service. Traffic
is suggested
to set
combination
of ARPSeg
valid value,
to
Flexible Size,
Flexible
canand
TrafficClass
validfor
value
mustSize
be set,
reduce
the MAC head cost and improve
is not adjustable.
the Iub throughput; For signalling, Fixed
Size is suggested to use for little MAC
head cost.(Flexible Size is only for
traffic, and signalling can only use Fixed
The
ofRelease
the parameter's
default
Size reason
in 3GPP
9 or later.)
value is to consider the header
consumption and the quality of service.
Immediately
Immediately
New service
setup or
reconfiguration
New service
setup or
reconfiguration
Mobile Country Code
Can't Modify
Can't Modify
Mobile
Network
Codeand should be set
It's a Qos
parameter
The default value setting rules: it is set
based on the condition of 5 BP segment
setting; the higher of BP with same
BearerType, the higher of AP; the higher
priority of Bearer Type(MBMS > HSPA >
DCH) with same BP, the higher of AP.If
the operator has no specific Qos
requirement,
defaulttwo
value
It's Applicationthe
Priority,
setscan
of suit
the
ordinary
qos
requirement.
parameters are set(one for congestion
Control and one for overload control)
radio bearer type(DCH, HSPA or
MBMS). For mapping Application
Priority, all the combination of The
BearerType valid value, BPSeg valid
value, direction(UL or DL) valid value
and RateSeg valid value must be set,
BPSeg(BP
Segment). For mapping
and is not adjustable.
Application Priority, all the combination
of The BearerType valid value, BPSeg
valid value, direction(UL or DL) valid
value and RateSeg valid value must be
set,
and is not
adjustable.
BPSeg(BP
Segment).
For mapping
set, and is not adjustable.
Can't Modify
Can't Modify
Immediately
Can't Modify
Can't Modify
Immediately
Immediately
Immediately
RateSeg for mapping AP. For mapping

set, and is not adjustable.
When system
The parament is set to decrease the risk
information is
of re-selection ping pong.
changed
When system
information is
changed
When system
The parament is set to decrease the risk
information is
of re-selection ping pong.
changed
This parameter will not be used.
When system
information is
changed
It's set to the License Value of the cell.
Immediately
It's set to the License Value of the cell.
Immediately
the value of this parameter is the

balance between the cell E-DCH
throughput and the cell UL interference
Immediately
It's a seasoned value
Immediately
It's a seasoned value
Immediately
channel type, It's not a adjustable

parameter
Can't Modify
Can't Modify
Immediately
Commercial network proved value
Immediately
Immediately
Immediately
Immediately
Cell Identity.
Can't Modify
Can't Modify
Immediately
Immediately
Queue Identity. It's not a adjustable

parameter
Can't Modify
Can't Modify
Immediately
the maximal MAC-c PDU Size that all

the UE can support on Downlink
Enhanced CELL_FACH.
Immediately
Immediately
Mobile Country Code
Can't Modify
Can't Modify
Mobile Network Code
Can't Modify
Can't Modify
The BP related data throughput and the

user experience are considered to
Immediately
there are 1, 2 or 3 class of users in

ordinary commercial network, so 3 is set
Immediately
in the default value to suit ordinary
requirements
the different of THPThresh value is as

large as possible for easy entension of
new THPSeg value
Immediately
It's a License parameter and should be

Immediately
set according to operator's requirement.
Service continuity is considered to

there are 1, 2 or 3 class of users in

ordinary commercial network, so 3 is set
Immediately
in the default value to suit ordinary
requirements
the different of ARPThresh value is as
large as possible for easy entension of Immediately
new ARPSeg value
Qos parameter.BPSeg used mainly for
maping AP; Too small value of
BPSegNum can not distinguish the AP
Immediately
of different users; Too large value of
BPSegNum may lead too complicate AP
Mapping. 5 is a tradeoff value which can
suit mosts of network requirement.
the different of BPThresh value is as
large as possible for easy entension of Immediately
new BPSeg value
At next use

At next use
to service planning.
Can't Modify
Can't Modify
Can't Modify
Can't Modify
Can't Modify
Can't Modify
Immediately
Immediately
Immediately
It's a License parameterand should be

Immediately
N/A
Immediately
The default value is set for the

Scheduling Priority configuration index
used for congestion scheduling.
At next
judgment (i.e.,
shall not affect
ongoing
connections)
Basic Priority(BP). For mapping

SP(Scheduling Priority), all the
combination of The BearerType valid
value, BP valid value must be set, and is
not adjustable.
radio bearer type(DCH, HSPA or
MBMS). For mapping Scheduling
Priority,
allparameter
the combination
of The
It's
a Qos
and should
be set
BearerType
value, BP requirement.
valid value
according
tovalid
the operator's
mustdefault
be set,value
and issetting
not adjustable.
The
rules: the
higher of ARPSeg with same traffic
class,
the of
higher
of BP; the
higher
cell index
Scheduling
priority,
one set
priority
of
traffic
class(C>S>I(the
less of
of setting is provided in the default
THP
value,
the
higher
of
THP
parameters.
priority)>B) with same ARPSeg, the
higher of BP.If the operator has no
specific Qos requirement, the default
value can suit the ordinary qos
requirement.
The default value setting rules: the
higher priority of BearerType(MBMS >
Index > DCH) with same BP value, the
HSPA
higher of AP; the higher BP with same
BearerType, the higher of AP.If the
operator has no specific Qos
requirement, the default value can suit
the
ordinary qos requirement.
Index

Immediately

Immediately
Cell ID
Can't Modify
Can't Modify
System default index
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Can't Modify
Can't Modify
Can't Modify
Can't Modify
Immediately
Handover CAC threshold is over the

ordinary CAC threshold ; the parameter
Immediately
setting rules: to get the highest cell
capacity at the condition of cell not
overload.

The default value is come from CSL's
requirement in HK. If the operator has
no specific Qos requirement, the default
value can be used in ordinary network.
This parameter is the Basic Priority used
in the mapping of AC threshold; all the
BP
be set. control
cell value
index must
for admission
parameters; one set of parameters are
set in the default value.
For maximal code resource using rate,
o(not reserved) is suggested to set so
that code resource can be used by all
users fairly(not reserved).
For the large RTWP fluctuating reported

from NodeB, large UL DCH AC
Threshold should be set(e.g. Default
setting is kept) to close the UL AC
function indirectly(avoiding error
admission
refusion).
For the large
RTWP fluctuating reported
from NodeB, large UL E-DCH AC
Threshold should be set(e.g. Default
setting is kept) to close the UL AC
function indirectly(avoiding error
admission refusion).
overload.
overload.
Immediately
Immediately
Immediately
Immediately
the parameter setting rules: to get the

highest cell capacity at the condition of
cell not overload.
Immediately
Qos parameter and the parameter

capacity at the condition of good traffic
Qos.
Immediately
Mobile Country Code
Can't Modify
Can't Modify
Mobile Network Code
Can't Modify
Can't Modify
New
CAC(Service
Setup,
N
handover or
Service
reconfiguration)
To match the background noise with the

real noise, this function must be
Immediately
opened.
To avoid the downlink overload and

protect the system, the downlink CAC
function must be opened.
It's set to the base noise value of NodeB

Immediately
restore factory setting
New
CAC(Service
It's set to the average Pathloss for
Setup,
Commercial network ordinary scene. It's
N
handover or
a seasoned value.
Service
New
Code
reconfiguration)
Resource
CAC(Service
For the value of CodeTreeResRto is 0
Setup,
N
(code not reserved), this value is invalid.
handover or
This parameter is used to solve the
Service
network optimization problem in Lybia in reconfiguration
which more than ten thousand RRC
CONNECTION REQUEST exit per 15
New Signalling
N
minutes in one cell. In ordinary network, Setup on DCH
that scene will not happen and this
parameter should be to a larger value to
avoid RRC CONNECTION limited.
It's set to the maximal user number that
Immediately
N
may be beared on DL EFACH in one cell
Scene Parameter, No default value,

should be set by network planning
operators.
Immediately
this parameter is decided by common

measurement purpose(value is single
for a certain measurement purpose) ,
and is not adjustable
Next
measurment
control
seasoned value
Next
measurment
control

Next
measurment
control
parameter index
Next
measurment
control
notes for parameter configuration
Next
measurment
control
seasoned value
Next
measurment
control
seasoned value
Next
measurment
control

Next
measurment
control
New
CAC(Service
Setup,
N
handover or
Service
reconfiguration)
New
CAC(Service
It's set to the average P-CPICH Ec/No
Setup,
for Commercial network ordinary scene.
N
handover or
It's a seasoned value.
Service
reconfiguration)
In current network, Uplink CAC
threshold is set to a larger value to
shield UL CAC function, the value of this
switch is indifferent and the default
value is "0: Off".
The successful call rate and the access

time delay are considered to define this Immediately
default value.

default value.

default value.
N/A
The service quality and the system

default value.
New connection N

default value.
New connection N
No effect

Immediately

default value.
New connection N

default value.
New connection N

default value.
New connection N
The service data accuracy and the

service data throughput are considered
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection
N
or new radio link

default value.
New connection
N
or new radio link
N/A
Can't Modify
The wireless scenario is considered to

New connection
N
or new radio link

default value.
New connection
N
or new radio link

default value.
New connection
N
or new radio link

default value.
New connection
N
or new radio link
Can't Modify
New connection
N/A
N
his parameter indicates the support type or new radio link
of RLC PDU size format for signaling
and service. Traffic is suggested to set
to Flexible Size, for Flexible Size can
reduce the MAC head cost and improve
New connection N
the Iub throughput; For signalling, Fixed
Size is suggested to use for little MAC
head cost.(Flexible Size is only for
traffic, and signalling can only use Fixed
The
consumption
and
the quality
Size header
in 3GPP
Release 9 or
later.)
of service are considered to define this New connection N
parameter.
The header consumption and the quality

parameter.

parameter.

parameter.
N/A
New connection
N
or new radio link
N/A
No effect
N/A
New connection N
N/A
New connection
N
or new radio link
N/A
New connection
N
or new radio link
N/A
New connection
N
or new radio link
N/A
New connection
N
or new radio link
N/A
New connection N
N/A
New connection N

default value.
New connection
N
or new radio link
The reason of the default value is to

make the distribution of resources more Immediately
rational.
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
Configuration index number
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
Next
measurment
control
The reason that the default value of the

parameter is on is to try best to improve

the quality of voice services.
Next
measurment
control
Next
measurment
N
control
Effective with
new service,
without effect of
exist service.In
N
some case as
load balance, it
would read the
new
value.
Effective
with
new service,
N
without effect of
exist service

parameter is 32K is because 32K is a
middle value between AMR 12.2K and
CS64K.
Effective with
new service,
N
without effect of
exist service

the effect utilization ratio of radio
resources.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
parameter is on is to try best to
N
without effect of
decrease the risk of call drops.
exist service

value is to consider the times of
reconfiguration and utilization ratio of
radio resource.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
make the distribution of resources more
N
without effect of
rational.
exist service
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
value is to consider the user experience
N
without effect of
and ping-pong adjustment.
exist service

value is to consider the user
experiences and the risk of call drops.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
parameter is on is to try best to provide
N
without effect of
better user experience.
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
parameter is off is to try best to
N
without effect of
decrease the risk ratio of call drop.
exist service

value is to consider the user
experiences and the risk of call drops.

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Because CS12.2K service is generally

sended with the period 20ms, and 3
data packages are allowed to send by
one time, so the parameter's value is set
to "60ms".
Effective with
new service,
N
without effect of
exist service

value is to consider the time interval of
normal services.
Effective with
new service,
N
without effect of
exist service

parameter is off is because the RRC
connection setup process is very fast, it
does't influence the user experience,
and there is no Cell Update in Idle state.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
value is to consider the quality of C and
N
without effect of
I/B PS services when Multi-RABs.
exist service
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
The reason that the parameter's default
new service,
value of the parameter is off is to try
N
without effect of
best to improve the system volume.
exist service
Effective with
This parameter is configured according
new service,
to whether the operator has purchased
N
without effect of
the license.
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
parameter is on is to try best to
N
without effect of
decrease the risk of call drops.
exist service
Effective with
new service,
value is to consider the times of
N
without effect of
reconfiguration and user's experiences.
exist service

value is to try best to increase the
successful ratio of RRC connection.
Immediately

value is to consider the user experience Immediately
of R99 and HSPA.
Effective with
new service,
parameter is on is to try best to provide
N
without effect of
better user experience.
exist service
Effective with
new service,
parameter is to try best to provide better
N
without effect of
user experience.
exist service
Effective with
new service,
N
without effect of
user experience.
exist service
Effective with
new service,
N
without effect of
user experience.
exist service
Effective with
new service,
N
without effect of
user experience.
exist service
Effective with
new service,
N
without effect of
user experience.
exist service
Effective with
new service,
N
without effect of
user experience.
exist service
Turn on this function switch, AMR

service has more chance to setup the
call successfully.
Immediately

value is to consider the header
consumption and the quality of service.
Immediately
The MBMS Background services often

is low rate .So the services are carried in
New Session
PTP or PTM based on the number of
UE responding counting/recounting
The default value is set in order to make

more UE to respond the
Immediately
counting/recounting, so that the MBMS
service will transport in PTM more easily

Immediately
It is set according to the code and power

Immediately
resource.
The MBMS Streaming services are also

the high rate services.If the services are
carried by PTP, there will consume more
resource.So the default is set to turn off New Session
the function of PTP, the MBMS
streaming services will be carried in
PTM.
Immediately

value is to consider the data throughput
demand, the utilization of radio resource
and the call completion ratio.
Effective with
new service,
N
without effect of
exist service

Effective with
new service,
N
without effect of
exist service

Effective with
new service,
N
without effect of
exist service

Effective with
new service,
N
without effect of
exist service

value is to try best to decrease the call
time delay.
Effective with
new service,
N
without effect of
exist service
it is set according to the downlink code

and power resource.
Immediately

value is to consider the round trip time
between UE and UTRAN.
Immediately

value is to try best to provide better user Immediately
experience.

experience.
Next
measurment
control
This parameter is a idenfication

parameter, and there is no need to
adjust.
Next
measurment
control
This parameter is traffic measurement

Next
events quantity, and there is no need to measurment
adjust.
control

adjust.
Next
measurment
control

experience.
Next
measurment
control

value is to consider the successful ratio
of measurement report.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

of radio resource.
Next
measurment
control

of radio resource .
Next
measurment
control

value is to consider the condition of the
decision for UE's event 4B0.
Next
measurment
control

of radio resource .
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control

experience.
Next
measurment
control
The reason that the parameter's default Next

value of the parameter is to try best to
measurment
provide better user experience.
control

Next
value is to try best to provide better user measurment
experience.
control
Can't Modify
Can't Modify
This parameter's value is fixed, and

there is no need to adjust it.
Can't Modify
Can't Modify
Effective with
new service
access, without
The reason that the parameter's default effect of exist
value is on is to try best to provide better service.In some N
user experience.
case of load
balance, it
would read the
Effective
with
new value.
new service,
value is to try best to provide better user
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service
Effective with
new service,
N
without effect of
experience.
exist service

value is to try best to provide better user Immediately
experience.

value is to consider UE battery
consumption and the user experience.
Immediately

Immediately

Immediately

consumption in E-FACH state.
Immediately
Effective with
new service,
value is to consider the success ratio of
N
without effect of
RRC connection.
exist service

Immediately

of radio resource.
Immediately

of radio resource.
New service

adjust.
Next
measurment
control
Next
measurment
control
Next
measurment
control

consider the QoS and the syatem
volume.
At Next Use
The uplink is switched off with a high

threshold because the fluctuation of
RTWP.
At Next Use

volume.
At Next Use

volume.
At Next Use

Immediately
requirement of cell coverage radius and
N/A
Immediately

considered the balance of service
quality and capacity between R99 and
HSDPA services.
Immediately

HSDPA services.
Immediately
Next Radio Link

Setup Request
or Next Radio
Link Addition
N
Request or Next
Radio Link Reconfiguration
Request
It's not recommended to perform heart

At Next Use
beat detection to UE.
Tests confirm that UE doesn't send
uplink data packages after it receives
the heart beat data, and the channel
switching to PCH or Idle state based on
At Next Use
the downlink and uplink traffic volume
measurement can be normally
performed, so the parameter
OnlyDnOnHB can be set to "0: Off'.
The default value is to try to prolong the
heart beat period on the premise that
At Next Use
UE does't send SCRI.

considered service quality and system
capacity.
Identification parameter, can not be

modified.
Can't Modify
Can't Modify
Cell Identity, can not be modified.
Can't Modify
Can't Modify
Can't Modify

Immediately
HSDPA services.
The users in the macro diversity status
is always about 40% of the total users in
the cell, for the users contains HS users
and DCH users, the HS users is about Immediately
15% in the macro diversity status, so it
allocated 15% power to HS users in
non-serving cell.
N/A
Can't Modify
Eb/N0 of DPCCH PILOT domain is

different in different radio environment,
New connection N
considering the balance of service
quality and cell capacity, so we take the
average value.
The default value has considered the

service quality and cell capacity.
New connection N

DynaUpdtPO2S
tch=0: New
connection;
N
DynaUpdtPO2S
tch=1: Rate
Level Change
The default value has consider the

New connection N
The default value can satisfy the

minimum requirement for E-AGCH
performance described in 3Gpp 25.101
protocol. And it has considered the
system capacity.
minimum requirement for E-AGCH
system capacity.
Next Radio Link

Setup Request
or Next Radio
Link Addition
N
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
N
Request or Next
Request

minimum requirement for E-HICH
system capacity.
system capacity.
minimum requirement for E-RGCH
system capacity.
minimum requirement for E-RGCH
system capacity.
Next Radio Link

Setup Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Request
Rate Level
Change
For the UE maximum power is 24dBm,

so the default value 33dBm is not to
limit the UE uplink power.
Rate Level
Change

call drop rate and cell capacity.
Rate Level
Change

MBMS service quality and cell capacity
when the cell in half-island status.
Immediately

MBMS service quality and cell capacity
when the cell in single cell status.
Immediately
N/A
Can't Modify
Can't Modify

uplink synchronization and cell uplink
capacity. For the services whose MBR
bigger then 2.048Mbps, the normal level Ongoing
of SIR target is about 7dB, so the
connection
default value is 8dB. The default SIR
target of other services also is near their
SIR target normal level.

service quality and cell uplink capacity.
Ongoing
connection

service quality and cell uplink capacity.
Ongoing
connection
Can't Modify
The default GBR levels can satisfy the

requirement of different HSDPA GBR
resource consumption limit for different
HSDPA GBR services, and the services Immediately
with similar GBR resource consumption
have be allocated into the same GBR
level.
The default GBR level number is 12, it is
big enough to meet the requirement of
different HSDPA GBR resource
Immediately
consumption limit for different HSDPA
GBR services.
N/A
Can't Modify
The default value of this parameter can

satisfy the requirement of different
HSDPA GBR resource consumption limit
for different HSDPA GBR services, and Immediately
UEHsReqPwrUplim[0]<=UEHsReqPwrU
plim[1]<=UEHsReqPwrUplim[2]<=...<=U
EHsReqPwrUplim[11].
the AMR service successful call rate and
the differentiation of queue ability for
Immediately
AMR services are considered to define
this default value.
the CS64k service successful call rate
and the differentiation of queue ability
for CS64k services are considered to
Immediately

N
default value.
Next Radio Link
Setup Request
The default value satisfy the
or Next Radio
requirement of P(Ack->Nack/Dtx)<1%,
Link Addition
where P(Ack->Nack/Dtx)=(UE_ackN
Request or Next
NodeB_ack)/UE_ack. And the uplink
Radio
Link ReNext Radio
Link
interference is small.
configuration
Setup Request
Request
or Next Radio
Link Addition
considered the system capacity and
N
Request or Next
service quality.
Request

considered downlink throughput and
Next Radio Link

Setup Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Radio
Link ReNext Radio
Link
configuration
Setup Request
Request
or Next Radio
Link Addition
Request or Next
Request
Immediately
Avoiding affecting the quality of HSDPA

GBR services in the beginning, the
Immediately
switch is closed.

where P(Ack->Nack/Dtx)=(UE_ackNodeB_ack)/UE_ack. And the uplink
Next interNodeB
handover
The default value of this parameter

satisfy the requirement of probability of
right receive, coverage and system
capacity.
Next interNodeB
handover

Next interNodeB
handover

satisfy the requirement of probability of
right receive, coverage and system
capacity.
satisfy the requirement of HSDPA
service quality.

service quality.
satisfy the requirement of the missed
detect rate less than 0.2%, and
generate minimum interference.
satisfy the requirement of the missed
detect rate less than 0.2%, and
generate minimum interference.
NodeB assigning mode can make full

use of power resource with best effort.
Next Radio Link

Setup Request
or Next Radio
Link Addition
N
Request or Next
Request
New connection N

service quality.
New connection N

considered uplink channel quality and
system downlink capacity.
Immediately
Usually there is no need that priority of

HS subscribers is entirely higher than
R99 subscribers, so the default value of Immediately
this parameter is "HS Load Decreasing
Algorithm".
N/A
Can't Modify
MBMS function is turned off, this

parameter is invalid. Maximum FACH
power adjustment function can reduce Immediately
the MBMS cell load, and little impact on
MBMS service quality.

avoid the ping-pong between overload
state and normal state, and it also
consider the service quality.
Immediately
Rate reduction of overload control can

reduce the load effectively, and the
Immediately
impact to online service is the minimum,
so it is necessarily.

satisfy the requirement of reducing the
load rapidly, and the impact to online
service is the minimum.
Immediately
The default value can avoid call drop

caused by overload control.
Immediately

service quality.
Can't Modify
Forcing handover can increase the load

of the neighboring cell, and if the
handover fail, the call would drop. So
Immediately
the default value of this parameter is
turn off the forcing handover function.

Immediately

Immediately

ensure the system stability and do best
effort to ensure stable service quality.
Immediately

effort to reduce the call drop caused by
overload control.
Immediately
N/A
No effect
N/A
No effect
N/A
No effect

Immediately

Immediately

Immediately

Immediately

ensures Node B use HSDPA power
safely, and the throughput of HSDPA
service is big as well.
Immediately
Because the rate of RACH channel is

low, if reducing load by transfer service
to cell_fach state, it would make RACH
channel congestion, so this function is
turned off.
Immediately

Immediately
Rate reduction of overload control can

reduce the load effectively, and the
Immediately
impact to online service is the minimum,
so it is necessarily.

Immediately

load rapidly.
Immediately
Forcing handover can increase the load

of the neighboring cell, and if the
handover fail, the call would drop. So
Immediately
the default value of this parameter is
turn off the forcing handover function.

load rapidly.
Immediately

load rapidly.
Immediately

Immediately

ensure the system stability and avoid
call drop caused by overload control.
Immediately

considered AMR service quality and
system capacity.
Immediately

considered AMR service quality and
system capacity.
Immediately
It is recommended to turn on the

function in order to decrease the load of Immediately
cell quickly.

service quality.
Immediately

service quality.
Immediately

service quality.
Immediately

service quality.
Immediately

ensure the UE in cell edge receive the
MICH rightly and avoid generating
unnecessary waste power.
Immediately
The power balancing type "Common"

can resolve the "power drifting" problem Immediately
when the UE in macro diversity status.
The default AICH power can ensure the

UE in the edge of the cell can receive AI
Immediately
information rightly, and the system
capacity is the biggest.
The round-trip time usually about 4-5

Ongoing
frames, so the default value of CoverPrd
connection
is 6 frames.
The default value of DpcchPcpLen and

SrbDelay can ensure the DPDCH power
New connection N
is suitable at the beginning of the
DPDCH data transmission.
The default PICH power can ensure

high successful paging rate and the
biggest system capacity.
New connection N
Next radio link
setup for
following
condition: RAB
hard handover,
N
incoming
Relocation,
service on
FACH
or PCH
Next radio
link
transfer
DCH.
setup
fortoRAB
N
reestablishment
The default value of SrbDelay can

ensure the DPDCH power is suitable at
the beginning of RB0-RB4 message be
transmitted, and the time delay is
acceptable.
considered the rate of RAB success
hard handover and system capacity.

considered the rate of success RAB reestablishment and system capacity.

considered the rate of success RAB or
SRB setup and system capacity.
considered the rate of new radio link
downlink successful synchronization
when soft or softer handover, and
system capacity.
considered the rate of SRB or F-DPCH
success hard handover and system
capacity.
When PCH power is -3dB, the
successful paging rate is high, and the
system capacity is the biggest.
requirement of coverage and system
capacity.
Immediately
Next radio link

setup
or setup
Next Cell
addition for
following
condition:
Next radiosoft
link
or softer
setup
for
handover
following in
SRNC,
add RL
condition:
with
RAB
on
DPDCH with
DPDCH
or
SRB hard RL
with
F-DPCH
handover
or Ftransmission
DPCH
hard but
without
service
handover
in
in
DRNC.
SRNC, add RL
with SRB on
DPDCH or RL
with service and
Immediately
F-DPCH
transmission in
DRNC.
Immediately

considered the system demand on the
timeliness of accessing system and cell
capacity. The default value is configured
for dual antenna receiver, and for single
antenna, 3dB needs to be added.
considered the uplink PRACH coverage
and the interference to the neighboring
cell.
Take effect after

the system
N
information is
updated
Immediately

Immediately

Immediately
The value 0 means there is no need to

configure different maximum downlink
power based on different basic priority.
Ongoing
connection
The value 0 means there is no need to

configure different maximum uplink
power based on different basic priority.
Ongoing
connection
Turn off this switch mainly consider the

bandwidth of Iub interface.
Immediately
The default value is to ensure the

service quality firstly, only when the load
of the cell is high indeed, the network
New connection N
planning & optimization engineer can
open this function based on the
situation.

Immediately
coverage of FACH and system capacity.
Take effect after

the S-CCPCH is
Y
deleted and
setup again.

requirement of coverage and cell
capacity.

coverage of SCCPCH and system
capacity.
At next use

coverage of SCCPCH and system
capacity.
Take effect after

the S-CCPCH is
Y
deleted and
setup again.

coverage of SCPICH and system
capacity.
Immediately

requirement of coverage and cell
capacity.
Immediately

default value.
New connection N
New connection N
New connection N
New connection N
New connection N

default value.
New connection N

default value.
New connection N

default value.
New connection N

default value.
make the service BLER in high load
condition higher then that in the lower
load condition, the cell capacity can be
increased. And in the same time, the
minium
requirement
of the
service can
The
default
value of this
parameter
quality
canservice
be satisfied.
make the
BLER in high load
minium requirement of the service
quality can be satisfied.
default value.

default value.
New connection N

engineer based on the cell load
condition and actual requirement of
coverage and cell capacity.
Immediately
N/A
Immediately
From the 10: 00 p.m. to the next moring

7: 00 a.m., the throughput always is
Immediately
small.

avoid the frequency be opened and
closed frequently, and it satisfy the
requirement of power saving.
Because Node B update RTWP is more

Immediately
in time and exactly.
From the 10: 00 p.m. to the next moring

7: 00 a.m., the throughput always is
Immediately
small.
N/A
Immediately

considered the requirement of power
saving and service quality.
Immediately
Immediately

avoid the condition that unmeant
Immediately
reduction of the UE number would
trigger the frequency switch off, and it
satisfy the requirement of power saving.
The value "2" consider the time or
Whether the working cell is congestion.
If one of the condition is satisfied, the
Immediately
switched off frequency should be
switched on.
It's set to the maximum enhanced uplink

CELL_FACH user number that NodeB
Immediately
can support in one cell.
It's a License parameter and should be

Immediately
SIB7 can make the UL interference be

updated in time.
Immediately

considered the demodulation quality and Immediately
the consumed uplink power.

requirement of high quality and low time Immediately
delay.

requirement of high common E-DCH
Immediately
service quality and appropriate resource
consumption.
The default value can ensure there is

enough time to transmit RRC message,
Immediately
and avoid occupy the resource too long
time.

considered the efficiency the resource
be used and the time delay for
transmition.
Immediately

ensure there is enough time for collision
Immediately
be resolved and using the resource with
minimum time.
For algorithm 1 inner loop power control

is done every time slot, so it can
Immediately
response to radio condition change
rapidly.

default value.
Immediately
Considering delay of service and uplink

power overhead brought by sending
happy bit.
Immediately
N/A
Can't Modify
Can't Modify

default value.
Immediately

default value.
Immediately

default value.
Immediately
The value 1 considers the Node B

scheduling firstly.
Immediately
Immediately
Next
measurment
control
Next
Can be adjusted according to the actual
measurment
requirement.
control
Considering the timeliness of the A/B

event which triggers TCP measurement,
Next
and avoiding the ping-pong of the A/B
measurment
event in order to satisfy the requirement
control
of the service quality and system
capability.
The parameter should be set according

to the capability of the neighbouring cell Immediately
of the adjacent RNC.
The biggest value 15.1dB means the

initial power of F-DPCH is determined
by NodeB. The initial power of F-DPCH
determined by NodeB will be more
accurately.
Considering whether it can correctly and
timely reflects the condition when SIR
cannot converge to the SIRtarget
because of deterioration of radio
condition.

Immediately
to the load condition of the cell.
system capacity.
system capacity.
system capacity.
system capacity.
system capacity.
system capacity.
system capacity.
The default value is to ensure the
invariable service quality requirement,
only when the load of the cell is high
indeed, the network planning &
optimization engineer can open this
function based on the situation.
Soft handover
happen
Soft handover
happen
Next radio link
addition request
or next radio
link reconfiguration
request
when
Next radio
link
soft
handover
addition request
happen.
or next radio
link reconfiguration
request when
soft handover
happen.
Soft handover
happen
Soft handover
N
happen
Next radio link
addition request
or next radio
link reN
configuration
request when
soft handover
happen.
New connection N

considered HSUPA service quality and
system capacity.
New connection N

considered HSUPA service quality and
system capacity.
New connection N
Switch off the E-AGCH power offset

dynamic updating function can reduce
the Iub reconfiguration.
No effect

Cell setup
avoid the power be adjusted by mistake.

ensure the frequency be switched off
Immediately
quickly and reduce the possibility of call
drop.

ensure the frequency be switched off
Immediately
quickly and reduce the possibility of call
drop.
The default value of this parameter is

longer enough to complete cell
reconfiguration and handover UE to
other cell. And it can ensure the
frequency be switched off quickly.
Immediately
N/A
Can't Modify
Can't Modify
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
because most cell is set Omni Antenna,

At next
so this parameter is default configured
positioning
0.If auctural cell is set beam anntena,
transaction
the parameter is configured 1.
Configure according anteType default

At next
Value.If auctural cell is set beam
positioning
anntena, the parameter is configured 1. transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
not updtae
except power
on
HSDPA HS-DPCCH ACK/NACK

enhancement license is closed by
default, and will be opened when the
operator has purchased the license.
At next
judgment (i.e.,
shall not affect
ongoing
connections)
The feature is not used in general.
At next use
consider both the Validity and

synchronization frequency of the cell
load.
At next use (i.e.,

shall not affect
N
ongoing
connections)
User experience is considered to define

At next use
this default value.
N/A
Immediately
Four code channels are is allowed by

default.
At next
judgment (i.e.,
shall not affect
ongoing
connections)
N/A
At next
positioning
transaction

At next use
this default value.
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Take effect after

the change is
N
loaded to the
RNC
In case that license support, NACC

helps UE reselect to 2G system.
At next use (i.e.,

shall not affect
N
ongoing
connections)

At next use
N/A
Take effect after

the change is
N
loaded to the
RNC

At next use
this default value.
N/A
Take effect after

the change is
N
loaded to the
RNC
N/A
Immediately

At next use
N/A
Take effect for

the next call
The parameter should be set based on

the actual scene.
Immediately
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
take effect on
next action
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
At next
positioning
transaction
N/A
at next use
Immediately
This function is decided by Users.
Immediately
N/A
Immediately
N/A
Immediately

the actual scene.
at next
admission
control(RAB
N
setup/configurat
ion/handover,
etc.)

the actual scene.
at next
admission
control(RAB
N
setup/configurat
ion/handover,
etc.)
N/A
at next use
Next
measurment
control
Next
measurment
control
Immediately
N/A
At next use

At next use
not used parameter
N/A

At next use

At next use
this parameter is depends on the UE

Next
positioning methods, and not suggest to measurment
adjust
control
Set the value 1 chip.It is make the
corresponding report not frequently, and
the change of the GPS timing of cell
frame can be acquired in time.this
parameter is depends on position
precise
not suggest
to is
adjust.
Set the value
1 chip.It
make the
corresponding report not frequently, and
the change of the GPS timing of cell
frame can be acquired in time.this
parameter is depends on position
precise not suggest to adjust.

At next use

At next use

At next use

At next use
N/A
At next use
Version1 is more compatible for interRAT cases.
Take effect for

the next call
For intra-RAT cases, usually, the related

Take effect for
equipment are our products, so
the next call
Version2 is selected.
N/A
At next use
N/A
immediately
The default value is off to decrease the

influnce to the RNC system
performance. It is on when there are
requirements.
New users

set by the RNC system performance
and the data size of the CDT/MR.
New users
The default value is off to decrease the

influnce to the RNC system
performance. It is on when there are
requirements.
New users
N/A
New users

set by the location precision and the
RNC system performance.
New users

set by the measurement report precision New users
and the RNC system performance.
According to the field test, the default

value is set to 0(Acknowledged Mode
RLC) to decrease the UM message
influnce on the Uu interface
performance.
New users
N/A
New users

of the RRC connection setup.
immediately

of the CELL/URA update.
immediately

of the UE capability enquiry.
immediately

set by the time delay and veracity of the immediately
dedicated CH establishment.


RL failure indication.


round-trip time delay between UE and
UTRAN.
immediately

UTRAN.
immediately

UTRAN.
immediately

general tolerant time delay of the lost
touch between UE and UTRAN.
immediately

set by the time delay of UE trying
reentering service area and the
avoidance of UE going to IDLE.
immediately

time delay of the RRC connection
release.
immediately
The default value is mainly set the

success rate of the PS inter-rat
handover from 3G to 2G.
immediately

set by the time delay and success rate
of the dedicated CH establishment.
immediately

set by the time delay and success rate
of the dedicated CH establishment.
immediately

RL failure indication.
The default value is mainly set by let UE

entering FACH status a.s.a.p. and
immediately
trigger UE doing cell reselection in this
status.
The default value of the parameter is

configured based on the maximum bit
rate of single uesr can realise with
64QAM
At next use

value of the parameter is off is because
At next use
the function is only used in some testing
scenes
not used parameter
N/A
not used parameter
N/A
N/A
At next use
The default value of the parameter is

configured based on the maximum bit
rate of single uesr can realise without
16QAM
At next use

value of the parameter is off is because
At next use
the function is only used in some testing
scenes

set by whether the service suitable for
call-reestablishment or not, the success immediately
rate of the call-reestablishment, and the
time delay of the CS RB release.
set by whether the service suitable for
call-reestablishment or not, the success immediately
rate of the call-reestablishment, and the
time delay of the PS RB release.
When system
If the parameter value is "Barred", users
information is
will not be acessed in the cell.
changed
When system
If the parameter value is "Barred", users
information is
will not be acessed in the cell.
changed
When system
information is
changed
Can't Modify
This parameter is determined by the

operator.

Can't Modify
This parameter is set according to the

cell covering radius.
When system
information is
changed

When system
information is
changed
When system
information is
changed
To guarentee the continuity of cell

selection.
When system
information is
changed
The parament is set according to the

When system
velocities of Ues, the risk of re-selection information is
ping pong and the change of signal.
changed
When system
information is
changed

When system
changed
To guarentee the time of cell selection,

and to decrease the risk of re-selection
ping pong .This parameter will not be
used.

ping pong .This parameter will not be
used.
When system
information is
changed

When system
ping pong and the risk of call drops.
changed

When system
changed

When system
changed

When system
changed
If operator has no specil use , the cell

should be campped on.
When system
information is
changed

Timeliness of measurements and the
consumption of battery energy of Ues.
When system
information is
changed

change of signal quality.
When system
information is
changed

change of signal quality.
When system
information is
changed

When system
velocities of cell selection, the risk of re- information is
selection ping pong.
changed

When system
changed

When system
changed

When system
changed

When system
changed

When system
changed

When system
information is
changed

When system
information is
changed
The default value is set to guarentee the

When system
accuracy of measurement quantity used
information is
for judgment according to the change of
changed
signal.

Timeliness of measurements and the
consumption of battery energy of Ues.
When system
information is
changed
When system
information is
changed
The parameters of cell selection and

reselection are only broadcast in SIB3.
When system
information is
changed

cell camp , the Timeliness of
measurements and the consumption of
battery energy of Ues.
When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

cell camp and the consumption of
When system
information is
changed

When system
changed
This function is not be used as usual.
When system
information is
changed

When system
information is
changed
This function is not be used as usual.
When system
information is
changed

When system
information is
changed
When system
information is
changed

velocities of Ues and the change of
signal.
When system
information is
changed

velocities of Ues and the change of
signal.
When system
information is
changed

ping pong .
When system
information is
changed

ping pong .
When system
information is
changed

ping pong .
When system
information is
changed
Access delayl is taken into account in

default value.
When system
information is
changed
This parameter should be set according When system

to intra-frquency interference and
information is
measurement accuracy.
changed

is changed

is changed

is changed

is changed

is changed

is changed

Can't Modify
Can't Modify

Can't Modify
Can't Modify

is changed

is changed

is changed

is changed

N/A

is changed
When system
information is
changed
When system
cell reselection difficult level is taken into
information is
account in default value.
changed
UE mobility is taken into account in

default value.

is changed

is changed

is changed

is changed

Can't Modify
Can't Modify

Can't Modify
Can't Modify
Handover difficult level, handover

When best cell
timeliness, handover tendency are taken
is changed
into account in default value.
When system
cell covering radius is taken into account
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
Inter-Rat handover probability and load

of GSM cell is taken into account in
default value.
At next use

default value.
When best cell

is changed

default value.
When best cell

is changed

default value.
When best cell

is changed
HCS is not used in current network.
When best cell

is changed
When system
Cell coverage area is taken into account
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed
When system
information is
in default value.
changed

New connection N
network planning including GSM

cells'location, GSM cell's signaling
quality etc.. is considered to define this
default value.
When best cell

is changed
Cell reselection difficult level is taken

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed
When system
information is
changed
Neighboring cells number and

neighboring cells priority are taken into
New connection N
Signal quality variation and

measurement timeliness are taken into
When best cell

is changed
Average handover times, handover

success rate, UE moving speed and
When best cell
handover area are taken into account in is changed
default value.

Can't Modify
Can't Modify

Can't Modify
Can't Modify

this default value.
When best cell

is changed

When best cell

is changed

is changed
Accurate of transmit and system

default value.
When best cell

is changed
handover success rate is considered to

When best cell

is changed

this default value.
is changed
Average handover times and handover

this default value.
When best cell

is changed
Average handover times and handover

this default value.
When best cell

is changed

success rate and handover area are
When best cell

is changed
Handover success rate is considered to When best cell

is changed

When best cell

is changed
Load distribution among carriers and

scenario are considered to define this
default value.
Immediately
Service distribution among carriers and

default value.
Immediately
Noise on UE is mainly considered to

Immediately
The difficulty level to trigger balance is

mainly considered to define this default
value.
Immediately

value.
Immediately
Factor resulting in unbalance is mainly

Immediately

reason why load is not balance are
Immediately

Immediately

value.
Immediately

value.
Immediately

value.
Immediately

value.
Immediately
Ping-pong balance is mainly considered

Immediately

Immediately

Immediately

Immediately

default value.
Immediately

default value.
Immediately

Immediately

Immediately

Immediately

default value.
Immediately

default value.
Immediately

Immediately

Immediately

value.
Immediately

value.
Immediately

value.
Immediately
The difficulty level to trigger DC

redirection is mainly considered to
Immediately
The difficulty level to trigger DC

redirection is mainly considered to
Immediately
Cell HSPA+ capability and UE

distribution among carriers are
Immediately
Cell HSPA+ capability and importance

order of each HSPA+ capability are
Immediately
Cell HSPA+ capability is mainly

Immediately
Cell HSPA+ capability and UE

distribution among carriers are
Immediately
Cell DC capability and UE distribution

among carriers are considered to define Immediately
this default value.
Operator's frequency resources and the When system

configuration of EUTRAN network are
information is
considered to define this default value. changed.
N/A
When system
information is
changed.
The difficulty level to trigger reselection

is mainly considered to define this
default value.
When system
information is
changed.
Operator's frequency resources is

value.
When system
information is
changed.

default value.
When system
information is
changed.
Which layer UE is expected to camp on When system

information is
default value.
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

information is
default value.
changed.
Operator's frequency resources and the When system

configuration of GERAN network are
information is
considered to define this default value. changed.

value.
When system
information is
changed.
Cell coverage is mainly considered to

When system
information is
changed.

When system
information is
changed.

When system
information is
changed.

When system
information is
changed.

information is
default value.
changed.
The difficulty level to trigger

measurement is mainly considered to
When system
information is
changed.
The difficulty level to trigger

measurement is mainly considered to
When system
information is
changed.
N/A
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

value.
When system
information is
changed.

default value.
When system
information is
changed.

information is
default value.
changed.
N/A
When system
information is
changed.

this default value.
When best cell

is changed

When best cell

is changed

When best cell

is changed

When best cell

is changed

When best cell

is changed

success rate, UE moving speed and
When best cell
handover area are taken into account in is changed
default value.

Can't Modify
Can't Modify

Can't Modify
Can't Modify

is changed

When best cell

is changed

When best cell

is changed

this default value.
is changed

this default value.
When best cell

is changed

this default value.
When best cell

is changed

success rate and handover area are
When best cell

is changed
Signal quality and handover success

When best cell
rate are considered to define this default
is changed
value.

At next use

At next use

At next use

At next use

At next use

At next use

At next use

At next use

At next use

At next use

the actual scene.
Immediately
System resource and handover success

rate are considered to define this default At next use
value.

At next use

At next use

to network deployment and compatibility Immediately
of equipment vendor.

At next use

At next use

At next use

At next use
Network planning is taken into account

in default value.
When system
information is
changed
When system
information is
changed
SIB12 is not used.
Can't Modify
At next use
Can't Modify

is changed

When best cell
is changed

When best cell
to UE mobility contiuity and call drop
is changed
possibility.
Handover based event 2D can fullfill the

When best cell
quality requirement, so this parameter
is changed
should be set "0".
When best cell

is changed

is changed

to judgement accuracy.
is changed

When best cell
to intra-frquency interference and
is changed
measurement accuracy.

is changed

to measurement accuracy.
is changed
Cell's and service's attribute are

Immediately

to measurement accuracy.
is changed

New connection N

is changed

is changed

is changed

is changed

is changed

When best cell
is changed
should be set "0".

When best cell
is changed
should be set "0".
When system
information is
changed
Network planning is taken into account

in default value.
When best cell

is changed

When best cell
is changed
Network planning including UMTS

cells'location, UMTS cell's signaling
quality is considered to define this
default value.
When best cell

is changed
cell reselection difficult level is

When system
information is
changed
cell reselection difficult level is

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed
Neighboring cells number and

neighboring cells priority are taken into
When best cell

is changed

is changed

When system
information is
changed

When system
information is
changed

When system
information is
changed

When system
information is
changed
When system
information is
changed

unbalance between carriers are
Immediately

unbalance between carriers are
Immediately

Immediately

Immediately

value.
Immediately
balance distribution among carriers and

Immediately
default value.

Immediately
default value.

Immediately
default value.

Immediately
default value.

Immediately
default value.

Immediately

At next use

Immediately

Immediately

At next use
the actual net planning is considered to

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately
load distribution and operator's idea are

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately
the actual scence is considered to

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately

Immediately
The coverage of neighboring cell is

At Next Use
The success rate of blind HO based

balance is considered to define this
default value.
At Next Use
The cell's throughput and load are

At Next Use
The time of compressed mode active

and UE measurement is considered to
At Next Use
This default value be set according to

network planning and user experience
At Next Use

At Next Use

default value.
When system
information is
changed.

default value.
When system
information is
changed.

default value.
When system
information is
changed.

When system
information is
changed.
When system
information is
changed.

value is to consider the timeliness of the
Immediately
information update and UE's battery
consumption.
N/A
Can't Modify
Can't Modify
Effective with
new service,
value is to consider the user experience
N
without effect of
and ping-pong adjustment.
exist service

experience.
Effective with
new service,
N
without effect of
exist service
Effective with
new service,
parameter is on is to try best to reduce
N
without effect of
the times of E-TTI reconfiguration.
exist service
Default value is "Closed", which should

be adjusted according to the
requirement of the operator.
At next use (i.e.,

shall not affect
N
ongoing
connections)
It is concluded by simulation that using

IR obtains more retransmission
combination gain than using CC. So
default value is set to 'RV Table'.
At next use (i.e.,

shall not affect
N
ongoing
connections)
HS-SCCH Less is closed by default,

which should be adjusted if the operator
has purchased the HS-SCCH Less
license.
At next use (i.e.,

shall not affect
N
ongoing
connections)
Considering together cell and service

throughput, gain brought by HS-SCCH
Less.
At next use (i.e.,

shall not affect
N
ongoing
connections)
DTX/DRX switch for non-realtime

services is closed by default, which
actual requirement of the operator.
At next use (i.e.,

shall not affect
N
ongoing
connections)
According to the actual requirement of

the operator.
At next use (i.e.,

shall not affect
N
ongoing
connections)
According to the actual requirement of

the operator.
At next use (i.e.,

shall not affect
N
ongoing
connections)
Now Qos renegotiation function is

turned off, so this parameter is invalid.
Turn off the GBR decrease function
consider the GBR service quality.
Immediately

At next
judgment (i.e.,
shall not affect
ongoing
connections)
This swich is opened by default which

Takes effect for
should be adjusted according to whether
the newly
N
the Node B support Iub transport bearer
established cell.
multiplexing.
The default value is set according to the

utilization of SCCPCH and the number
New Session
of common transport channel
reconfiguration
It is set according to the probability of

RRC connection successfully, the time
of UE wait to idle mode after RRC
connection request and the round-trip
delay between UE and UTRAN.
Immediately
N/A
Can't Modify
Can't Modify
Different value ranges are defined for

different common physical channels, the
default value gurrantees it is unique in
the cell.
Take effect after

the cell is
Y
deleted and
setup again
Considering together the capacity

requirement of the paging nofification
and downlink power resource.
Immediately
At next use (i.e.,

Considering uplink power and the
shall not affect
accuracy of the channel quality used by
N
ongoing
downlink scheduler.
services)
Considering uplink power, the accuracy

of the synchronization of the current
channel quality.
At next use (i.e.,

shall not affect
N
ongoing
services)
Considering uplink power, the accuracy

of the synchronization of the current
channel quality.
At next use (i.e.,

shall not affect
N
ongoing
services)
Considering the time it takes UE to

transfer to discontinous reception and
the accuracy of the judgement that the
downlink is in discontinous transmission.
At next use (i.e.,

shall not affect
N
ongoing
services)
Considering the frequency to monitor

the HS-SCCH when UE is in downlink
discontinous reception and the time it
takes UE to transfer to continous
reception.
At next use (i.e.,

shall not affect
N
ongoing
services)
At next use (i.e.,

Considering demodulation performance shall not affect
N
and life-span of the battery.
ongoing
services)
At next use (i.e.,

Considering uplink power and the speed
shall not affect
for UE to transit to continuous
N
ongoing
transmission.
services)
At next
judgment (i.e.,
According to whether UL 16QAM is
shall not affect
allowed to be used in the RNC.
ongoing
connections)
At next
16QAM is not supported in this version, judgment (i.e.,
so the switch is closed by default. It will shall not affect
be supported in UR11 version.
ongoing
connections)
At next use (i.e.,

Considering uplink power and the speed
shall not affect
for UE to transit to continuous
N
ongoing
transmission.
services)
At next use (i.e.,

Considering uplink power consumption shall not affect
N
and the timeliness for data transmission. ongoing
services)
At next use (i.e.,

Considering uplink power consumption shall not affect
N
and the timeliness for data transmission. ongoing
services)

accuracy of the power when UE
transitting to continuous transmission.
At next use (i.e.,

shall not affect
N
ongoing
services)

accuracy of the power when UE
transitting to continuous transmission.
At next use (i.e.,

shall not affect
N
ongoing
services)
At next use (i.e.,

shall not affect
N
ongoing
services)
At next use (i.e.,

shall not affect
N
ongoing
services)
Considering power consumtion of UE

and the timliness of data transmission.
At next use (i.e.,

shall not affect
N
ongoing
services)

At next use (i.e.,

shall not affect
N
ongoing
services)

At next use (i.e.,

shall not affect
N
ongoing
services)

At next use (i.e.,

shall not affect
N
ongoing
services)
Numbering the different sets of

DTX/DRX parameters of the system.
Realtime and non-realtime services
having different QoS requirement and
using different index separately.
Considering uplink power consumption
and whether the DPCCH power can
synchonize the current channel quality
when UE resumes data transimssion
from DTX cycle 2 status.
The value is a trade off between user

experience and the access success
rate.
At next use (i.e.,

shall not affect
N
ongoing
connections)
Considering UE's paging occasion and

power consumption of UE.
At next use (i.e.,

shall not affect
N
ongoing
connections)
Tradeoff of user experience when

upgrading UE's GBR and the
smoothness of the raise of system load
when upgrading GBR.
At next use (i.e.,

shall not affect
N
ongoing
connections)
By default RAB QoS

negotiation/renegotiation are all closed
the demand of operator.
At next use (i.e.,

shall not affect
N
ongoing
connections)
The value is a trade off between user

experience and the access success
rate.
At next use (i.e.,

shall not affect
N
ongoing
connections)
Take effect after

the cell is
Y
deleted and
setup again
Immediately
According to the actual usage of this

SCCPCH
Immediately
SCCPCH information are the same in

the idle and connected state, the
contents of the SIB5 and SIB6 are the
same, only SIB5 should be broadcast
Immediately
According to the actual used transmit

diversity mode.
Immediately
Odd number services are downlink and

even number services are uplink. This is
basic service type identification
paramater.
At next use (i.e.,

shall not affect
N
ongoing
services)
Different value range are defined for

different common physical channels. It
should be guarranteed that Common
Physical Channel ID is unique for one
common physical channel within a cell.
The parameter is large or small has no
influence to the performance.The only
requirement is that each SCCPCH
should use different frame timing offset
to avoid sending at the same time so as
to avoid high average peak ratio.
According to the actual domain the

service used.
At next use (i.e.,

shall not affect
N
ongoing
services)
This is basic service type identification

paramater.Once it is configured, it
At next use (i.e.,

shall not affect
N
ongoing
services)

paramater.Once it is configured, it
At next use (i.e.,

shall not affect
N
ongoing
services)
At next use (i.e.,

shall not affect
N
ongoing
services)
At next use (i.e.,

shall not affect
N
ongoing
services)
0...5 are used for siganlling service;

6...250 are used for single service. Odd
number is configured for downlink
service; even number is configured for
uplink service. Different service has
different identity.
paramater and should be configured
according to the actual traffic type of the
service. Once it is configured, it should
not be modified.
At next
judgment (i.e.,
shall not affect
whether DL 64QAM license of the cell is
ongoing
connections)
At next
judgment (i.e.,
should be adjusted according to whether
shall not affect
2ms TTI license of the cell is purchased
ongoing
by the operator.
connections)
make sure Common Physical Channel

ID is unique for one common physical
channel within a cell
Take effect after

the cell is
N
deleted and
setup again.
This is service type identification

parameter.
At next use (i.e.,

shall not affect
N
ongoing
services)
According to user throughput, delay and

Immediately
This parameter is basic identification

parameter, should not be modified.
Can't Modify

default value.
Immediately

default value.
Immediately
The data accuracy and the throughput

value.
Immediately
The data accuracy and the throughput

value.
Immediately
Considering data rate and packet error

rate.
Immediately
Considering transmission performance

when power is limited and the L2
overhead.
Immediately
Considering the rate of the DTCH data

and uplink interference.
Immediately
Considering the user rate and uplink CE

Immediately
resource consumption.
Considering the user rate and uplink CE

Immediately
resource consumption.
At next use (i.e.,

shall not affect
N
ongoing
services)
Take effect after

It should be guaranteed that Common
the S-CCPCH is
Transport Channel ID is unique for one
Y
deleted and
common transport channel within a cell.
setup again.
Different services use different

DTX/DRX parameters, which are
identified by different index. There are
two sets of DTX/DRX parameters
configured for realtime and non-realtime
services by default.
Considering used spreading factor and

demodulation performance.
Immediately

which should be adjusted according to Take effect for
whether UL 16QAM license of the cell is the next call
Based on the following requirement of

the operator: the opening of CBS,
MBMS; the rate requirement of the
FACH carrying data, the capability
requirement of the PCH of the cell.

to the actual configuration of the
At next use
transport resource.

Can't Modify
Can't Modify

to the actual configuration of the
At next use
transport resource.

value of the parameter is on is because
it is generally set to "off" only when other Immediately
company's RNC across IUR doesn't
support the CN assignment GBR.
Immediately
N/A
take effect on
next action
N/A
Can't Modify
Can't Modify
N/A
Can't Modify
Can't Modify
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

network planning
At Next Use
In Most Case, the function is not needed New User
The switch of function, default value is

off
Immediately
In Most Case, the function is not needed
New Paging
From CN
In Most Case, the function is not needed
New Paging
From CN
N/A
Take effect for

the next MBMS N
service

set by the location precision and
location measurement expense.
At next use

set by the location precision and
location measurement expense.
At next use

set by the handover time delay,
handover success ratio and call reestablishment success ratio.
At next use
The white user service quality and the

system capacity are considered to
Immediately
N/A
Can't Modify
Can't Modify

New connection
N
or new radio link

New connection
N
or new radio link

New connection
N
or new radio link

New connection
N
or new radio link

white user service quality and cell
capacity.
Rate Level
Change

white user call drop rate and cell
capacity.
Rate Level
Change
Eb/N0 of DPCCH PILOT domain is

different in different radio environment,
considering the balance of service
New connection N
quality and cell capacity, so we take the
average value.
For the UE maximum power is 24dBm,

so the default value 33dBm is not to
limit the UE uplink power.
Rate Level
Change

uplink synchronization and cell uplink
capacity.
Ongoing
connection

Ongoing
white user service quality and cell uplink
connection
capacity.

Ongoing
white user service quality and cell uplink
connection
capacity.

New connection N

New connection N

New connection N
New connection N
New connection N


New connection N
New connection N

New connection N

New connection N

New connection N

New connection N

New connection N

New connection N

New connection N

New connection N

New connection N

considers the service quality as priority
for white list user.
New connection
N
or new radio link

New connection N

New connection N

New connection N
VIP users' experence and service

interruption are considered to define this Immediately
default value.
VIP users' experence and service

interruption are considered to define this Immediately
default value.
IMSI Digits Number in White List for

User Identification, and no default
parameter value is set. If the Whitelist
service setup
Feature is activated, this parameter
should be set according to IMSI Digits of
the network
IMSI High-bit Digits in white List for User
Identification, and no default parameter
value is set. If the Whitelist Feature is
service setup
activated, this parameter should be set
according to IMSI of the network.
For VIP may prempt resource of
common users, so VIP will not used in
ordinary scene
service setup
the users in whitelist commonly have

higher priority than common users, so
the default value is set to the highest
priority.
service setup

priority.
service setup

priority.
service setup

priority.
service setup
the default value is set to "on" to

guarantee the VIP performance
Immediately
the default value is set to "on" to

Immediately
the default value is set to "2" to

Immediately

considers the service quality as priority
for white list user.
New connection
N
or new radio link
The paramter is set both considering

NON-VIP QOS and CPU load.So the
default value is set 3 .
Immediately
Whether HSPA load balance is used

during RRC procedure is considered to
Immediately
The value 0 indicates that there is no

need to add an additional step size for
the SIR target increasing when
consecutive error TB occurs.
New connection
N
or new radio link
This parameter is set to 0 means there

is no need to increase the SIR target
increasing step size when consecutive
SIR target increasing occurs.
New connection
N
or new radio link
the performance can be guaranteed

then the user num is less or equal to 20,
service setup
so the default value is set to 20. it's an
experienced value.

default value.
New connection
N
or new radio link

default value.
New connection
N
or new radio link

set by the call drop ratio, user
experience and cell call reestablishment success ratio.
At next use

set by the call drop ratio, user
experience and cell call reestablishment success ratio.
At next use
Downlink power balancing parameter is New radio link

get from SRNC according to 3Gpp.
in DRNC.
Usually, this default value satisfy the

requirement of DRNC radio link quality
and avoid power wasting.
Effective with
new service,
N
value is to consider the user experience. without effect of
exist service

value is to consider the compatibility
problem with UE.
Effective with
new service,
N
without effect of
exist service
N/A
at next use
suggest set 6.most UE can position

successfully on acquiring 6 satelites
at next use
information, and the Uu message length
is not too long.
N/A
New radio link

in DRNC.
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use
N/A
at next use

experience.
Next measurmentN

Immediately

Immediately
Choosing RNC location mode makes

RNC will support location service when
RNC is not configured SAS device.
At next use

At next use

At next use

When best cell
to VIP users performance and non-VIP
is changed
user performance.

When best cell
is changed
user performance.

When best cell
is changed
user performance.

When best cell
is changed
user performance.

to VIP users performance and non-VIP At next use
user performance.
N/A
Immediately
N/A
Immediately
N/A
Immediately
N/A
Immediately

set by the MR data size and service
coverage.
At next use
Service
Impaction Level
How to Impact
The Related
common transport
channel will be
reconfiged.
The
If theRelated
value of the
common
parametertransport
is
channel
willtoo
be large
configured
reconfiged.
or too little , Some
processes may be
If
the value of the
performed
parameter
inaccuratly is
such as
configured
too
the congestion
large,
the on
downlink
detection
Edata
will
be
DCH , FP Node
buffered
in NodeB
synchronisation,
FP
for
a long channel
time.
transport
If
the value of the
synchronisation.
parameter is
configured too little,
the downlink data
The
may Related
not be
common
transport
transferred
at the
channel
will
right momentbeon uu
reconfiged.
interface.
The Related
common transport
channel will be
reconfiged.
The Related
common transport
channel will be
reconfiged.
The Related
common transport
channel will be
reconfiged.
N/A
N/A
View->Configuration
OMC Access path
Management->RNC
NE->RNC Radio
Resource
Management>UltranCellView->Configuration
>UltranCellXXXManagement->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->MBMS
Resource
Configuration
ManagementInformation
>UltranCell-In A Cell>Time
of Arrival
>UltranCellXXXWindow
Endpoint
>Modify Advanced
View->Configuration
Parameter->MBMS
Management->RNC
Configuration
NE->RNC Radio
Information
Resource In A Cell>Time
of Arrival
ManagementWindow
>ExternalStartpoint
UTRAN CellView->Configuration
>External
UTRAN Cell
Management->RNC
XXX->Transport
NE->RNC Radio Time
Delay
Resource
ManagementView->Configuration
>External UTRAN CellManagement->RNC
>External UTRAN Cell
NE->RNC
Radio Time
XXX->Transport
Resource
Delay Jitter
Management->Modify
Advanced
ParameterView->Configuration
>RNC
Radio
Resource
Management->RNC
Management->Time
of
NE->RNC Radio
Arrival Window
Resource
Endpoint
for FACH
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Time
of
NE->RNC Radio
Arrival Window
Resource
Startpoint
for FACH
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Time
of
NE->RNC Radio
Arrival Window
Resource
Endpoint
for PCH
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Time
of
NE->RNC Radio
Arrival Window
Resource
Startpoint
for PCH
Management->RNC
Configuration->IU
Uplink in Sequence
Delivery
Indicator
View->Configuration
whether According to
Management->RNC
Indication
NE->RNC from
RadioCN
Resource
Management->CN
NAS Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->CN
View->Configuration
NAS
Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
GSM CellView->Configuration
>External
GSM Cell
Management->RNC
XXX
NE->RNC Radio
Resource
>External GSM CellManagement->RNC
>External GSM Cell
NE->RNC
XXX->BandRadio
Indicator
Resource
Management>External GSM CellView->Configuration
>External GSM Cell
Management->RNC
XXX->Base Station
NE->RNC
Radio
Colour Code
Resource
Management>External
>External
GSM Cell
Management->RNC
XXX->BCCH
ARFCN
NE->RNC Radio
Resource
Management>External
>External
GSM Cell
Management->RNC
XXX->BSC
Identifier
NE->RNC Radio
Resource
>External GSM Cell
NE->RNC
XXX->Cell Radio
Identifier
Resource
Management>External
>External
GSM Cell
Management->RNC
XXX->GERAN
Cell
NE->RNC Radio
Indicator
Resource
>External
GSM CellManagement->RNC
>External
NE->RNC GSM
RadioCell
XXX->Location
Area
Resource
Code
Management>External GSM Cell>External GSM Cell
View->Configuration
XXX->Modify
Management->RNC
Advanced ParameterNE->RNC
>MaximumRadio
Allowed UL
Resource
TX Power
Management>External GSM Cell>External GSM Cell
XXX
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
>External
GSM Cell
Management->RNC
XXX
NE->RNC Radio
Resource
>External GSM Cell
NE->RNC
Radio
XXX
Resource
>External GSM Cell
NE->RNC
Radio
XXX->Network
Colour
Resource
Code
>External GSM Cell
Management->RNC
XXX->PLMN Number
NE->RNC
of Sharing Radio
the GSM
Resource
Cell
>External GSM Cell
Management->RNC
XXX->Routing Area
NE->RNC
Radio
Code
Resource
>External GSM Cell
NE->RNC
Radio
XXX
Resource
>External GSM Cell
Management->RNC
XXX->Shared Network
NE->RNC
Area CodeRadio
Number
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX
NE->RNC Radio
Resource
>External
UTRAN CellManagement->RNC
>External
NE->RNC UTRAN
Radio Cell
XXX->Cell
Resource Identity
Management>External UTRAN CellView->Configuration
Management->RNC
XXX->Closed Loop
NE->RNC
Radio
Mode 1 Support
Resource
Indicator
Management>External UTRAN Cell>External UTRAN Cell
XXX->CPC DTX-DRX
Support Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
XXX->Max U CPC HSNE->RNC
SCCH lessRadio
Support
Resource
Indicator E DTX Cycle
Management>External
Management->RNC
XXX->DRNC
Diversity
NE->RNC Radio
Combination
Indicator
Resource
Management>External
Management->RNC
XXX->SRNC
Diversity
NE->RNC Radio
Combination
Indicator
Resource
Management->RNC
XXX->64QAM DL
NE->RNC
Radio
Support Indicator
Resource
NE->RNC
Radio
XXX->DUARFCN
Resource
Management>External
Management->RNC
XXX->E-DCH
HARQ
NE->RNC Radio
Combining
Capability
Resource
Management>External
Management->RNC
XXX->E-DCH
SF
NE->RNC Radio
Capability
Resource
NE->RNC
XXX->2msRadio
E-TTI
Resource
Support Indicator
Management->RNC
XXX->Neighboring Cell
NE->RNC
Enhanced Radio
F-DPCH
Resource
Support Indicator
NE->RNC
Radio
XXX->F-DPCH
Resource
Support Indicator
XXX->Flexible MAC-d
PDU Size Support
Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
Management->RNC
XXX->Frequency
NE->RNC Radio Band
Indicator
Resource
Management>External
Management->RNC
XXX->HSPA
Support
NE->RNC Radio
Method
Resource
Management>External
Management->RNC
XXX->Location
NE->RNC RadioArea
Code
Resource
Management>External
Management->RNC
XXX->Max
UE DTX
NE->RNC Radio
Cycle
Resource
Management->RNC
XXX->RACH Maximum
NE->RNC
Allowed ULRadio
TX Power
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX
NE->RNC Radio
Resource
NE->RNC
Radio
XXX
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Mimo64Qam
NE->RNC Radio
Support
ResourceIndicator
Management->RNC
XXX->MIMO Support
NE->RNC
Indicator Radio
Resource
NE->RNC
Radio
XXX
Resource
XXX->Primary CPICH
Power
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
XXX->Primary CPICH
NE->RNC
Radio
Power Configuration
Resource
Tag
Management>External
Management->RNC
XXX->PLMN
Number
NE->RNC Radio
of
Sharing
the
Cell
Resource
Management>External
Management->RNC
XXX->Cell
Primary
NE->RNC Radio
Scrambling
Resource Code
Management->RNC
XXX->Routing Area
NE->RNC
Radio
Code
Resource
NE->RNC
XXX->RNCRadio
Identity
Resource
Management>External
Management->RNC
XXX->Service
Area
NE->RNC Radio
Code
for
BC
Domain
Resource
NE->RNC
Radio
XXX->SACB
Resource
Configuration Tag
Management>External UTRAN Cell>External
UTRAN Cell
View->Configuration
XXX->Service
Area
Management->RNC
Code
for
CS
and
NE->RNC Radio PS
Domain
Resource
NE->RNC
Radio
XXX
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Shared
Network
NE->RNC Radio
Area
Code
Number
Resource
XXX->STTD Support
Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Support
R5/R6
NE->RNC Radio
Congestion
Detection
Resource
Indicator
Management->RNC
XXX->TUTRAN-GPS
NE->RNC
Radio
Measurement
Support
Resource
Indicator
Management->RNC
XXX->TX Diversity
NE->RNC
Indicator Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->URA
Number
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->UUARFCN
NE->RNC Radio
Resource
>UltranCell->GSM
Management->RNC
Neighbouring Cell
NE->RNC
XXX->Cell Radio
Identity
Resource
Management>UltranCell->GSM
Neighbouring
Cell
View->Configuration
View->Configuration
XXX->Share
Cover
Management->RNC
Management->RNC
Indication
NE->RNC
NE->RNC Radio
Radio
Resource
Resource
Management->Logical
ManagementRNC
Associated With
>UltranCell->GSM
PLMN
Configuration
Neighbouring
Cell XXX
View->Configuration
Information->Logical
Management->RNC
RNC XXX->Modify
NE->RNC
Radio
Advanced ParameterResource
>Iu Interface Timers
Management->Logical
and Constants
RNC
Associated With
Information->Timer
for
PLMN
Configuration
Ignoring
all
OVERLOAD
RNC
XXX->Modify
Messages
or Signalling
Advanced
ParameterPoint Congested
>Iu
Interface Timers
Information(TigOR)
and Constants
Information->Timer for
Not Allowing to
Increase Traffic(TinTR)
N/A
N/A
N/A
N/A
N/A
The Related
common transport
channel will be
reconfiged.
The Related
common transport
channel will be
reconfiged.
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Modify
NE->RNC
Radio
>NodeB Resource
Management->NodeB
Audit Timer
Configuration
Information->NODEB
View->Configuration
XXX->Modify
Management->RNC
Advanced
NE->RNC ParameterRadio
>Diversity Control Field
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->NodeB
No.
NE->RNC Radio
Resource
View->Configuration
Management->NodeB
Management->RNC
Configuration
NE->RNC Radio
Information->NODEB
Resource
XXX->NodeB
Type
Management->NodeB
Configuration
Information->NODEB
View->Configuration
XXX->Modify
Management->RNC
Radio
>Support R5/R6
Resource
Management->NodeB
Indicator
View->Configuration
Configuration
Management->RNC
Information->NODEB
NE->RNC
Radio
XXX->Transport
Time
Resource
Delay
Management->NodeB
View->Configuration
Configuration
Management->RNC
Information->NODEB
NE->RNC
Radio
XXX->Modify
Resource
Advanced ParameterManagement->Logical
>Transport Time Delay
RNC
Jitter Associated With
View->Configuration
PLMN Configuration
Management->RNC
Information XXXNE->RNC
Radio
>RPLMN Range
Resource
Information->Number
Management->Logical
of FDD UMTS
RNC
Associated
Frequency
RangeWith
View->Configuration
PLMN Configuration
Management->RNC
Radio
>RPLMN Range
Resource
Information->Number
Management->Logical
of GSM BA Range
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>RPLMN
Range
Resource
Information
Management->Logical
RNC Associated With
PLMN Configuration
Information XXX>RPLMN Range
Information
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
PLMN Configuration
View->Configuration
Information XXXManagement->RNC
>Logical RNC
NE->RNC
AssociatedRadio
With PLMN
Resource
Configuration
View->Configuration
Management->Logical
Information->Integrity
Management->RNC
RNC
Associated
With
Protection
Algorithm
NE->RNC
Radio
PLMN
Configuration
Resource
Information
XXXManagement->Modify
>RPLMN
Range
Advanced ParameterInformation
>RNC
Radio Resource
View->Configuration
ManagementManagement->RNC
>Maximum
Number of
NE->RNC Radio
Retransmissions
of the
Resource
RRC
CONNECTION
Management->Modify
RELEASE ParameterAdvanced
COMPLETE
>RNC
Radio Resource
View->Configuration
Message(N308)
>Maximum
Number of
NE->RNC Radio
Retransmissions
of the
Resource
RRC CONNECTION
Management->Logical
RELEASE
Message
RNC Associated
With
PLMN Configuration
View->Configuration
>RPLMN Range
NE->RNC
InformationRadio
Resource
Management->LAC
and SNAC InformaitonView->Configuration
>Location
Area Code
Management->RNC
NE->RNC Radio
Resource
Management->LAC
and SNAC InformaitonView->Configuration
>MCC
Management->RNC
NE->RNC Radio
Resource
Management->LAC
View->Configuration
and SNAC InformaitonManagement->RNC
>MNC
NE->RNC Radio
Resource
View->Configuration
Management->LAC
Management->RNC
and
SNACRadio
InformaitonNE->RNC
>Shared
Network
Area
Resource
Code
Management->Logical
RNC Associated with
PLMN Configuration
View->Configuration
Information xxxManagement->RNC
>Logical RNC
NE->RNC
AssociatedRadio
with PLMN
Resource
Configuration
Management->User
Information
Authorized
PLMN+SNAC
Information->Extend
Information Digits Num
View->Configuration
Management->RNC
NE->RNC Radio
Resource
N/A
Management->User
Authorized
View->Configuration
PLMN+SNAC
Management->RNC
Information->MCC
NE->RNC Radio
Resource
N/A
Management->User
View->Configuration
Authorized
Management->RNC
PLMN+SNAC
NE->RNC
Radio
Information->MNC
Resource
N/A
Management->User
Authorized
View->Configuration
PLMN+SNAC
Management->RNC
Information->MCC
NE->RNC Radio of
Shared
Network
Resource
N/A
Management->User
View->Configuration
Authorized
Management->RNC
PLMN+SNAC
NE->RNC
Radio of
Information->MNC
Resource
Shared Network
ManagementN/A
View->Configuration
>UltranCellManagement->RNC
>UltranCellXXXNE->RNC
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>Pathloss Scenario
N/A
>UltranCell>UltranCellXXX->Cell
View->Configuration
Ability and Cell
Management->RNC
Reselection->Closed
NE->RNC Radio
Loop
Mode 1 Support
Resource
Indicator
N/A
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
N/A
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
Cell will be deleted
Managementand reestablished. View->Configuration
>UltranCellXXX->Cell
NE->RNC
Radio
Setup ParametersResource
>DUARFCN
ManagementN/A
>UltranCellView->Configuration
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
F-DPCH
Support
Resource
Indicator
Cell will be deleted Managementand reestablished. >UltranCell>UltranCellXXX->Cell
Setup Parameters>Frequency Band
Indicator
N/A
N/A
the cell will be

deleted and
reestablished.
N/A
N/A
N/A
N/A
N/A
the cell will be

deleted and
reestablished.
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->UTRAN
Cell->Cell
Ability and
View->Configuration
Cell
ReselectionManagement->RNC
>HSPA
Support
NE->RNC
Radio
Method->HSPA
Resource
Support Method
>Ultran
Cell
Global
NE->RNC
Radio
Information->Location
Resource
Area Code
>Ultran
Cell
Global
NE->RNC
Radio
Information->Local
Cell
Resource
Identity
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
Maximum
Resource
Transmission Power
Management->RNC
Ability and Cell
NE->RNC
Radio
Reselection->MBMS
Resource
Support Indicator
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
Radio
>UTRAN Cell
Global
Resource
Information
>Ultran
Cell
Global
View->Configuration
NE->RNC
Radio
Information->CMP
Management->RNC
Resource
Module Number
NE->RNC
Radio
ManagementResource
>UltranCellManagement>UltranCellXXXView->Configuration
>UltranCell>Ultran Cell Global
Management->RNC
>UltranCellXXXInformation->NodeB
NE->RNC
Radio
>Modify
Number Advanced
Resource
Parameter->utranCellManagement>The Number of
>UltranCellConsecutive In-Sync
>UltranCellXXXIndications NodeB
>Modify
ReceivedAdvanced
After which
Parameter->utranCellRL Restore Procedure
>The
Number of
Shall be
Consecutive
Out-ofTriggered(N_INSYNC_
Sync
IND) Indications
NodeB Received After
which the Timer
T_RLFAILURE Shall
be
Started(N_OUTSYNC_
IND)
View->Configuration
Management->RNC
NE->RNC Radio
Resource
N/A
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>Sending Times of
>UltranCellPaging Message
N/A
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->utranCellResource
>PCCPCH Information
Managementin SIB6 Configuration
Cell will be deleted View->Configuration
and reestablished. Tag
>UltranCellXXXNE->RNC Radio
>Ultran Cell Global
Resource
Information->PLMN
ManagementNumber
of Sharing the
>UltranCellCell
N/A
>UltranCellXXXView->Configuration
>Modify Advanced
Management->RNC
Parameter->utranCellNE->RNC
>Dynamic Radio
Persistence
Resource
Level Information of
Cell will be deleted ManagementSIB6 PRACH in SIB7
and reestablished. >UltranCellConfiguration Tag
View->Configuration
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
Primary
Resource
Scrambling Code
ManagementN/A
>Ultran
Cell
Global
NE->RNC
Radio
Information->Routing
Resource
Area Code
ManagementN/A
View->Configuration
Radio
>Ultran Cell
Global
Resource
Information->RNC
ManagementIdentity
N/A
>Ultran Cell Global
NE->RNC
Radio
Information->Service
Resource
Area Code for BC
ManagementDomain
N/A
View->Configuration
Radio
>Ultran Cell
Global
Resource
Information->SACB
ManagementConfiguration Tag
N/A
>Ultran Cell Global
NE->RNC
Radio
Resource
Area Code for CS and
ManagementPS Domain
N/A
>UltranCell>UltranCellXXX>Ultran Cell Global
Information->Sector
Identity
View->Configuration
Management->RNC
NE->RNC Radio
Resource
ManagementN/A
Management->RNC
Ability and Cell
NE->RNC
Radio
Reselection->MultiResource
User Detection
ManagementSupport Indicator
N/A
>Modify
Advanced
NE->RNC
Radio
>SIB12 Indicator
ManagementN/A
>Modify
Advanced
NE->RNC
Radio
>SIB4 Indicator
ManagementN/A
>Modify
Advanced
NE->RNC
Radio
>SIB6 Indicator
ManagementN/A
Management->RNC
Ability and Cell
NE->RNC
Radio
Reselection->STTD
the cell will be
Resource
Support Indicator
deleted and
Managementreestablished.
Management->RNC
Setup
ParametersNE->RNC
Radio
>T_Cell
Resource
N/A
Radio
>UTRAN Cell
Global
Resource
Information
ManagementN/A
>Ultran Cell Global
NE->RNC
Radio
Information->URA
Resource
Cell will be deleted Number
Managementand reestablished.
Management->RNC
Setup
ParametersNE->RNC
Radio
>UUARFCN
Resource
N/A
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
N/A
Management>UltranCell>UltranCellXXX>UTRAN Cell Global
Information
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
>neighbouring
Resource
cellXXX->Cell Identity
Management>UltranCell>neighbouring
cellXXX->Does
View->Configuration
Neighbouring
Cell
Management->RNC
Belong
to
Self
Physical
NE->RNC Radio
RNC
Resource
>neighbouring
cellXXX
NE->RNC Radio
View->Configuration
Resource
Management->RNC
ManagementNE->RNC
Radio
>UltranCellResource
>neighbouring
Management->Qos
cellXXX->Share Cover
Relevance
Indication
View->Configuration
Configuration->Qos
Management->RNC
Configuration Related
NE->RNC
to NetworkRadio
ElementResource
>Qos Configuration
Management->Qos
Related to Network
Relevance
Element XXXConfiguration->Qos
>Transport Qos Profile
Configuration
Related
parameter
Index
View->Configuration
to Network ElementManagement->RNC
>Qos
Configuration
NE->RNC
Radio
Related
to Network
Resource
Element
XXX->NE
Management->Qos
Office
Id
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration
Related
NE->RNC
Radio
View->Configuration
to
Network
Element
Resource
Management->RNC
Management->Qos
NE->RNC Radio
Relevance
Resource
Configuration->Qos
Management->QOS
Configuration
Related
Relevation
to
Network
Element
View->Configuration
Configuration->QOS
Management->RNC
Configuration of
NE->RNC
Radio
Special Traffic
Resource
Categories->QOS
Management->QOS
Configuration of
View->Configuration
Relevation
Special Traffic
Management->RNC
Configuration->QOS
Categories xxxNE->RNC
Configuration
of Profile
>TransportRadio
Qos
Resource
Special
Traffic
Parameter Index
Management->QOS
Categories->QOS
Relevation
Configuration of
Configuration->QOS
Special Traffic
Configuration
of
Categories xxx->Traffic
Special
CategoryTraffic
Categories->QOS
Configuration of
Special Traffic
Categories xxx>Transport Bearer
Type
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
Configuration
of
NE->RNC Radio
Special
Traffic
Resource
Categories->QOS
Management->QOS
Configuration
of
Relevation
View->Configuration
Special
Traffic
Configuration->QOS
Management->RNC
Categories
xxxConfiguration
of
NE->RNC
Radio
>Transport
Bearer
Special
Traffic
Resource
Type
1
Categories->QOS
Management->QOS
Configuration
of
Relevation
View->Configuration
Special
Traffic
Configuration->QOS
Management->RNC
Categories
xxxConfiguration
of
NE->RNC
Radio
>Transport
Bearer
Special
Traffic
Resource
Type
2
Categories->QOS
Management->QOS
Configuration
of
Relevation
View->Configuration
Special
Traffic
Configuration->QOS
Management->RNC
Categories
xxxConfiguration
of
NE->RNC
Radio
>Transport
Bearer
Special
Traffic
Resource
Type
3
Categories->QOS
Management->QOS
Configuration
of
Relevation
View->Configuration
Special
Traffic
Configuration->QOS
Management->RNC
Categories
xxxConfiguration
of
NE->RNC
Radio
>Transport
Bearer
Special
Traffic
Resource
Type
4
Categories->QOS
Management->QOS
Configuration
of
Relevation
Special
Traffic
Configuration->QOS
View->Configuration
Categories
xxxConfiguration
of
Management->RNC
>Transport
Bearer
Special
Traffic
NE->RNC
Radio
Type
5
Categories->QOS
Resource
Configuration
of
Management->QOS
View->Configuration
Special
Traffic
Relevation
Management->RNC
Categories
xxxConfiguration->QOS
NE->RNC
Radio
>Transport
Bearer
Configuration
of
Resource
Type
6 Traffic
Special
Management->QOS
Categories->QOS
View->Configuration
Relevation
Configuration
of
Management->RNC
Configuration->QOS
Special
Traffic
NE->RNC
Radio
Configuration of
Categories
xxx
Resource
Special Traffic
Management->QOS
Categories->QOS
Relevation
Configuration of
Configuration->QOS
Special Traffic
Configuration
of
Categories xxx->Uplink
View->Configuration
Special
Traffic
Reserved Bandwidth
Management->RNC
Categories->QOS
for I/B Traffic(kbps)
NE->RNC
Radio
Configuration
of
Resource
Special Traffic
Management->Qos
Categories xxxRelevance
>Downlink
Reserved
View->Configuration
Configuration->Qos
Bandwidth
for I/B
Management->RNC
Configuration->Basic
Traffic(kbps)
NE->RNC
Radio
Priority
Transport
Resource
Bearer
Type
XXXManagement->Qos
>Mobile
Country
Code
Relevance
Configuration->Qos
Priority Transport
Bearer Type XXX>Mobile Network Code
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Qos
Relevance
Configuration->Qos
View->Configuration
Management->RNC
Priority Transport
NE->RNC
Radio
Bearer
Type XXXResource
>Basic
Priority
Management->Qos
Transport
Bearer Type
Relevance
View->Configuration
Index
Configuration->Qos
Management->RNC
NE->RNC
Radio
Priority
Transport
Resource
Bearer
Type XXXManagement->Qos
>BPSEGs
View->Configuration
Relevance
Management->RNC
Configuration->Qos
NE->RNC
Radio
Resource
Priority Transport
Management->Qos
Bearer Type XXXRelevance
>Radio Bearer Type
View->Configuration
Configuration->Qos
Management->RNC
NE->RNC
Radio
Priority Transport
Resource
Bearer Type XXXManagement->Qos
>Transport Bearer
View->Configuration
Relevance
Type
Management->RNC
Configuration->Qos
NE->RNC Radio
Resource
Priority
Transport
Management->Qos
Bearer
Type
Relevance XXX>IPDSCP
View->Configuration
Configuration->Qos
Management->RNC
NE->RNC
Radio
Priority Transport
Resource
Reserved Bandwidth
Management->Qos
XXX->Basic Priority
View->Configuration
Relevance
Transport Reserved
Management->RNC
Configuration->Qos
Bandwidth Index
NE->RNC
Radio
Resource
Priority Transport
Management->Qos
Reserved Bandwidth
View->Configuration
Relevance
XXX->Basic Priority
Management->RNC
Configuration->Qos
Segment
NE->RNC
Radio
Resource
Priority Transport
Management->Qos
Reserved Bandwidth
Relevance
XXX->Uplink Reserved
View->Configuration
Configuration->Qos
Management->RNC
Traffic(kbps)
NE->RNC
Radio
Priority Transport
Resource
Reserved Bandwidth
Management->Qos
XXX->Downlink
View->Configuration
Relevance
Reserved Bandwidth
Management->RNC
Configuration->Qos
for DCH I/B
NE->RNC
Radio
Traffic(kbps)
Resource
Priority Transport
Management->Qos
Reserved Bandwidth
Relevance
XXX->Uplink Reserved
Configuration->Qos
Bandwidth for HSPA
I/B Traffic(kbps)
Priority Transport
Reserved Bandwidth
XXX->Downlink
Reserved Bandwidth
for HSPA I/B
Traffic(kbps)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
The Related
common transport
channel will be
deleted and setup
again .
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
NE->RNC Radio
Priority
Transport
Resource
Reserved
Bandwidth
Management->Qos
XXX->Mobile Country
Relevance
Code
Configuration->Qos
View->Configuration
Priority Transport
Management->RNC
Reserved Bandwidth
NE->RNC
Radio
XXX->Mobile
Network
View->Configuration
Resource
Code
Management->RNC
Management->RNC
NE->RNC
Radio
Configuration->Shared
Resource
Network Mode
Management->Logical
RNC Associated With
PLMN Configuration
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->RNC
Resource
Management->User
to PLMN->Tnnsf
Authorized
PLMN+SNAC
View->Configuration
Information->Shared
Management->RNC
Network
Area
Code
NE->RNC
Radio
Resource
Management->MBMS
View->Configuration
Configuration->MSCH
Management->RNC
Supported Switch
NE->RNC Radio
Resource
NE->RNC Radio
Identity
Resource
Radio
>Modify Advanced
Resource
Parameter->PICHView->Configuration
Management>PICH STTD Indicator
Management->RNC
>UltranCellNE->RNC
Radio
>UltranCellXXXResource
>Modify Advanced
ManagementParameter->Prach>UltranCell>Type of PRACH
>UltranCellXXXPreamble
>Modify
Advanced
View->Configuration
Parameter->HSPA
Management->RNC
Configuration
NE->RNC Radio
Information
Resource In A Cell>E-AGCH Multiplexing
Management->Modify
Switch
in Dedicated
Advanced
Parameterand
Common
E-DCH
>HSPA Configuration
Information->RNC
DC+MIMO Support
Indicator
N/A
N/A
N/A
N/A
N/A
The Related
common transport
channel will be
deleted and setup
again .
N/A
N/A
The Related
common transport
channel will be
deleted and setup
again .
The Related
common transport
channel will be
deleted and setup
again .
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
Dual
Resource Cell+MIMO
Support Indicator
Management->RNC
XXX->External UTRAN
NE->RNC
Radio
Cell Dual Cell+MIMO
Resource
Support Indicator
Management->Modify
View->Configuration
Advanced ParameterManagement->RNC
>RNC Radio Resource
NE->RNC
Radio
Management->Number
Resource
of Cells Updating SIB3
Management->Modify
View->Configuration
Advanced
ParameterManagement->RNC
>RNC
Radio
Resource
NE->RNC Radio
Management->Time
Resource
Interval
Updating SIB3
Managementamong Cells
>Modify Advanced
NE->RNC
Radio
>Cell Available
ManagementSubchannel Number
>UltranCellContinuous Setting
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->AICHResource
>AICH Transmission
ManagementTiming
View->Configuration
Radio
>Modify Advanced
Resource
Parameter->AICHManagement>Cell ID
>Modify
Advanced
NE->RNC
Radio
>AICH
Common
ManagementPhysical
Channel ID
>Modify Advanced
NE->RNC
Radio
>PRACH Common
View->Configuration
ManagementPhysical Channel ID
Management->RNC
>UltranCellNE->RNC
Radio
>Modify Advanced
ManagementParameter->AICH>UltranCell>AICH STTD Indicator
>UltranCellXXX>Modify Advanced
Parameter->HSPA
Configuration
Information In A Cell>Code Update
Hysteresis A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
N/A
>Modify Advanced
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
ManagementInformation In A CellView->Configuration
>UltranCell>DPCH Code
Management->RNC
N/A
>UltranCellXXXHysteresis Radio
NE->RNC
>Modify
Advanced
Resource
Parameter->HSPA
ManagementConfiguration
>UltranCellInformation In A Cell>UltranCellXXXN/A
>HS-PDSCH
Bit Rate
View->Configuration
>Modify Advanced
Management->RNC
Parameter->HSPA
NE->RNC
Radio
Configuration
Resource
Information In A CellManagement>Co-NodeB HSN/A
>UltranCellPDSCH Code Sharing
View->Configuration
Indicator
Management->RNC
Ability and Cell
NE->RNC
Radio
ReselectionResource
>Maximum Number of
ManagementHS-PDSCH
N/A
Management->RNC
Ability
and Radio
Cell
If the number is
NE->RNC
Reselection->Minimum
reduced, the
Resource
Number of HS-PDSCH
services bear on
Managementthe deleted E>UltranCellView->Configuration
AGCH will be
Management->RNC
dropped
Ability
and Radio
Cell
If the number is
NE->RNC
Reselection->Number
reduced, the
Resource
of E-AGCH
services bear on
Managementthe deleted E>UltranCellView->Configuration
RGCH and E-HICH >UltranCellXXX->Cell
Management->RNC
will be dropped
Ability
and Radio
Cell
NE->RNC
Reselection->Number
Resource
of E-RGCH/E-HICH
ManagementN/A
View->Configuration
NE->RNC
Ability and Radio
Cell
If the number is
Resource
Reselection->Number
reduced, the
Managementof HS-PDSCH
services scheduled View->Configuration
>UltranCellby the deleted HS- Management->RNC
Radio
SCCH will be
>Modify Advanced
Resource
dropped
Parameter->HSPA
View->Configuration
>UltranCellInformation In A CellManagement->RNC
>UltranCellXXX>Number of HS-SCCH
N/A
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->HSPA
>UltranCellInformation In A Cell>UltranCellXXX>Switch for DRNC
N/A
>Modify
Advanced
Code Re-Assignment
Parameter->MBMS
Radio Link Release
Configuration
Information In A Cell>MBMS S-CCPCH
Reserved Number
(Step: S-CCPCH of
64kbps)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>HSPA
Configuration
Management->RNC
Information->DPCH
NE->RNC Radio
Code
Re-Assign
Resource
Support Indicator
Management->Modify
Advanced ParameterView->Configuration
>HSPA Configuration
Management->RNC
Information->DPCH
NE->RNC
Radio
Code Re-Assign
Resource
Period
Management->Modify
Advanced
>RNC Radio Resource
Management->RNC
Management->Code
NE->RNC Radio
Update
Period
Resource
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management->Code
Resource
Update Period Unit
Management->Modify
Advanced Parameter>HSPA
Configuration
View->Configuration
Information->RNC
Management->RNC
64QAM
Support
NE->RNC
Radio
Indicator
Resource
View->Configuration
Management->HSPA
Management->RNC
Configuration->RNC
NE->RNC
Enhanced Radio
F-DPCH
Resource
Support Indicator
Management->Modify
Advanced Parameter>HSPA Configuration
View->Configuration
Information->RNC
Management->RNC
Downlink Enhanced
NE->RNC
Radio
Layer 2 Support
Resource
Indicator
Management->HSPA
View->Configuration
Configuration->RNC
Management->RNC FDPCH
Support
NE->RNC
Radio
Indicator
Resource
Management->Modify
>HSPA Configuration
Management->RNC
Information->RNC
NE->RNC
Radio
MIMO Support
Resource
Indicator
Management->HSPA
Configuration->RNC
View->Configuration
MIMO
and DL64QAM
Management->RNC
Combined
Capability
NE->RNC Radio
Support
Indicator
Resource
Management->Modify
Advanced Parameter>MBMS Configuration>B Traffic Frequency
Converge Switch
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
The related
common transport
channel will be
reconfigured.
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
Radio
>MBMS ConfigurationResource
>S Traffic Frequency
ManagementConverge Switch
>UtranCell Information
in
MBMS Service AreaView->Configuration
>UtranCell
Information
Management->RNC
in
MBMS
Service
NE->RNC Radio Area
XXX->Cell
Resource Number of
a Frequency Layer in a
MBMS
SACInformation
>UtranCell
Management->RNC
in
MBMS Service
NE->RNC
Radio Area>UtranCell
Resource Information
in
MBMS Service Area
ManagementXXX
View->Configuration
>UtranCell
Information
Management->RNC
in MBMS Service AreaNE->RNC
>UtranCellRadio
Information
Resource
in MBMS Service Area
ManagementXXX->DUARFCN of
>UtranCell
the Cells in Information
the MBMS
View->Configuration
in
MBMSArea
Service AreaService
Management->RNC
NE->RNC
Radio Area
in MBMS Service
Resource
XXX->Frequency Band
ManagementIndicator of the Cells in
>UtranCell
Information
the MBMS Service
View->Configuration
in
MBMS
Service
AreaArea
Management->RNC
NE->RNC
Radio Area
in MBMS Service
Resource
XXX->MBMS Preferred
ManagementLayer Indicatorfor
>UtranCell
Information
Frequencies
in SAC
View->Configuration
in
MBMS
Service
AreaManagement->RNC
>UtranCellRadio
Information
NE->RNC
in
MBMS Service Area
Resource
XXX->MBMS
Management-Service
Area
Code Information
>UtranCell
View->Configuration
in
MBMS Service AreaManagement->RNC
>UtranCell
Information
NE->RNC Radio
in
MBMS
Service
Area
Resource
XXX->Mobile
Country
ManagementCode
>UtranCell
Information
View->Configuration
in
MBMS
Service
AreaManagement->RNC
>UtranCell
Information
NE->RNC Radio
in
MBMS Service Area
Resource
XXX->Mobile
Management-Network
Code
>Modify
Advanced
NE->RNC
Radio
Parameter->MICHResource
>MICH
Common
ManagementPhysical
Channel ID
>UltranCell>UltranCellXXX>Modify Advanced
Parameter->MICH>Number of NI per
Frame
View->Configuration
Management->RNC
NE->RNC Radio
The Related
Resource
common transport
Managementchannel will be
>UltranCelldeleted and setup View->Configuration
again .
>Modify
Advanced
NE->RNC
Radio
Parameter->MICHResource
>MICH STTD Indicator
Management->NodeB
View->Configuration
N/A
Configuration
Management->RNC
Information->NODEB
NE->RNC Radio
XXX->Co-NodeB
HSResource
PDSCH
Code
Sharing
Management->NodeB
Method
Configuration
N/A
Information->NODEB
View->Configuration
XXX->Modify
Management->RNC
Advanced
>Co-NodeB
Resource HSPDSCH Code Sharing
Cell will be deleted ManagementPeriod
and reestablished. Update
Management->RNC
Setup
ParametersNE->RNC
Radio
>PCCPCH
Resource STTD
Indicator
Cell will be deleted Managementand reestablished. >UltranCellView->Configuration
Management->RNC
Setup Parameters->PNE->RNC
CPICH Tx Radio
Diversity
Resource
Indicator
N/A
>Modify
Advanced
NE->RNC
Radio
Parameter->Prach
Resource
N/A
>Modify
Advanced
NE->RNC
Radio
Parameter->Prach
Resource
N/A
>Modify
Advanced
NE->RNC
Radio
Parameter->Prach
Resource
N/A
>Modify
Advanced
Resource
The related
Parameter->Prach
Managementcommon transport
>UltranCellchannel will be
View->Configuration
>UltranCellXXXreconfigured.
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->PrachResource
>PRACH Available
ManagementSubchannel Number
N/A
Parameter->Prach>Cell ID
N/A
N/A
N/A
N/A
N/A
The Related
common transport
channel will be
deleted and setup
again .
The Related
common transport
channel will be
deleted and setup
again .
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
>PRACH
Common
ManagementPhysical
Channel
ID
View->Configuration
Radio
>Modify Advanced
Resource
Parameter->PrachManagement>Initial Dynamic
>UltranCellPersistence
View->Configuration
>Modify
Advanced
NE->RNC
Radio
>Maximum
Number of
ManagementPreamble Being
>UltranCellTransmitted
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Maximum Number of
ManagementPreamble Ramping
>UltranCellCycles
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Permitted
Maximum
ManagementAccess
Service
Class
>Modify Advanced
NE->RNC
Radio
>PRACH
Preamble
ManagementScrambling
Code
>Modify Advanced
NE->RNC
Radio
>Detected
Preamble
ManagementThreshold
>UltranCell>UltranCellXXXView->Configuration
>Modify
Advanced
Management->RNC
Parameter->PrachNE->RNC Radio
>PRACH
Resource Preamble
Power
Ramp Step
>Modify
Advanced
Resource
Parameter->Prach
>Modify
Advanced
NE->RNC
Radio
>Persistence
Management-Scaling
Factor
Number
Parameter->Prach>Broadcast in either
SIB5 or SIB6
View->Configuration
Management->RNC
NE->RNC Radio
The Related
Resource
common transport
>UltranCelldeleted and setup View->Configuration
>UltranCellXXXagain .
Management->RNC
>Modify Advanced
NE->RNC
Radio
Cell will be deleted >Available Signature
Managementand reestablished.
Management->RNC
Setup ParametersNE->RNC
Radio
>SCH TSTD
Indicator
Resource
N/A
Management->UL
View->Configuration
Scrambling Code
Management->RNC
Configuration In RCPNE->RNC
Radio
>RCP Module
Number
Resource
N/A
Management->UL
Scrambling
Code
View->Configuration
Configuration In RCPManagement->RNC
>Ending
of RCP
NE->RNCNo.
Radio
Scrambling
Code
Resource
View->Configuration
N/A
Management->UL
Management->RNC
Scrambling
Code
NE->RNC Radio
Configuration In RCPResource
>Starting
No. of RCP
Management->Logical
Scrambling
CodeWith
RNC
Associated
View->Configuration
N/A
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_NB
N/A
PLMN
Configuration
Management->RNC
4.75k
Use Tag
Information
XXXNE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_NB
N/A
PLMN
Configuration
Management->RNC
5.15k
Use Tag
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_NB
N/A
PLMN
Configuration
Management->RNC
5.90k
Use Tag
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_NB
N/A
PLMN
Configuration
Management->RNC
6.70k
Use Tag
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
to
PLMN->AMR_NB
N/A
PLMN Configuration
7.40k
Use Tag
Information
XXX>Modify Advanced
Parameter->RNC
to PLMN->AMR_NB
7.95k Use Tag
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
View->Configuration
RNC Associated
With
to
PLMN->AMR_NB
Management->RNC
PLMN Configuration
10.2k
Use Radio
Tag
NE->RNC
Information
XXXResource
>Modify Advanced
Management->Logical
Parameter->RNC
RNC
Associated
With
Configuration
Related
View->Configuration
PLMN
Configuration
to PLMN->AMR_NB
Management->RNC
Information
XXX12.2k Use Tag
NE->RNC
Radio
>Logical RNC
Resource
Associated With PLMN
Management->Logical
Configuration
RNC
Associated With
Information->AMR
View->Configuration
PLMN
Configuration
Rate
Adjustment
Management->RNC
Information
XXXSwitch
for RNC
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
6.60k
Use Tag
Information
XXXNE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
8.85k
Use Tag
Information
XXXNE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
12.65k
Use XXXTag
Information
NE->RNC Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
14.25k
Use XXXTag
Information
NE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
15.85k
Use XXXTag
Information
NE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC
Associated
With
View->Configuration
to
PLMN->AMR_WB
PLMN
Configuration
Management->RNC
18.25k
Use XXXTag
Information
NE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
to
PLMN->AMR_WB
PLMN Configuration
19.85k
Use XXXTag
Information
>Modify Advanced
Parameter->RNC
to PLMN->AMR_WB
23.05k Use Tag
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
N/A
PLMN Configuration
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->RNC
Resource
Managementto PLMN->AMR_WB
N/A
View->Configuration
>UltranCell23.85k Use Tag
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->SCPICHManagement>Cell ID
N/A
>Modify Advanced
NE->RNC
Radio
Parameter->SCPICHResource
>S-CPICH
Common
ManagementCell will be deleted Physical Channel ID
>UltranCelland reestablished. View->Configuration
>Modify Advanced
NE->RNC
Radio
>S-CPICH
Tx Diversity
ManagementIndicator
N/A
>Modify Advanced
NE->RNC
Radio
>Time
Interval of
ManagementBarred
AC
N/A
>Modify Advanced
NE->RNC
Radio
>Number
of Cell
ManagementBarred
AC
N/A
>Modify Advanced
NE->RNC
Radio
>Switch
of Cell
ManagementRestriction
N/A
>Modify
Advanced
Management->RNC
Parameter->utranCellNE->RNC Radio
>Switch
The users of the
Resourceof Polling in
Restriction
barred AC can not Cell
initiate CS call.
>UTRAN
ResourceCell Global
Information
The users of the
Managementbarred AC can not >UltranCellView->Configuration
initiate CS call.
>Ultran Cell Global
NE->RNC
Radio
Information->Switch
of
Resource
Polling
in
CS
Domain
The users of the
Managementbarred AC can not DSAR
>UltranCellinitiate CS call.
>UltranCellXXX>Ultran Cell Global
Information->Switch of
CS Domain DSAR
N/A
It
willwill
notbe
affect
the
Cell
deleted
ongoing
services to
and reestablished.
only change this
parameter. But the
MIMO pilot mode
and P-CPICH
transmit diversity
mode must be
changed at the
same time which
need to using
deletethe
the
Service
Cell
will
be
deleted
cell and
re-set
up
same
code
as the
and
reestablished.
the cell
again.
OCNS
code
will be
dropped if the
parameter
"CellReestabInd"
Service
using the is
set
to "code
Not as the
same
Reestablish".
OCNS code will be
Cell
will be
deleted
dropped
if the
and
setup
again
if
parameter
the
parameter
"CellReestabInd" is
"CellReestabInd"
is
set
to " Not
set
to
Reestablish".
"Reestablish".
and setup again if
the parameter
the
user which is is
"CellReestabInd"
barred
set to can not
respond
paging
"Reestablish".
the user which is

barred can not
respond paging
the user which is

barred can not
respond paging
the user which is

barred can not
initiate PS service

and reestablished.
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
RadioF>Cell Enhanced
Resource
DPCH Support
ManagementIndicator
Management->RNC
Ability and Cell
NE->RNC
Radio
Reselection->MIMO
Resource
Indicator
NE->RNC
Radio
>MIMO Pilot Mode
Management>UltranCell>UltranCellXXX->Cell
View->Configuration
Setup
ParametersManagement->RNC
>Cell
MIMO
Support
NE->RNC Radio
Indicator
Resource
View->Configuration
>UltranCellNE->RNC
Radio
>OCNS Parameter
Management>UltranCell>UltranCellXXXView->Configuration
>OCNS ParameterManagement->RNC
>Number
the Codes
NE->RNCof
Radio
with
SF
=128
Ordered
Resource
for
OCNS
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
Radio
>UTRAN Cell
Global
Resource
Information
>Ultran
Cell
Global
NE->RNC
Radio
Information->Switch
of
Resource
PS Domain DSAR
Setup Parameters->SCPICH Support
Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>UltranCell>UltranCellXXX>Modify Advanced
Parameter->utranCellView->Configuration
>Timer
Length for
Management->RNC
Trigger
Radio
Link
NE->RNC
Radio
Failure
Procedure
After
Resource
NodeB
Receive
ManagementN_OUTSYNC_IND
>UltranCellConsecutive
Out-ofView->Configuration
Sync
Management->RNC
Setup ParametersIndication(T_RLFAILU
NE->RNC
Radio
>Cell MIMO
and
RE)
Resource
DL64QAM Combined
ManagementCapability Support
>UltranCellIndicator
View->Configuration
Management->RNC
>STTD andRadio
MIMO
Resource
Activation Binding
ManagementIndicator
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
VAM
Resource Support
Indicator
Management->Modify
View->Configuration
>UE Internal
NE->RNC
Radio
Measurement
Resource
Configuration->Cell
Management->Modify
Identity
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC
Radio
Configuration->UE
Resource
Internal
Measurement
Management->Modify
Configuration
Index 3
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC
Radio
Configuration->UE
Resource
Internal
Measurement
Management->Modify
Configuration
Index 4
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration->UE
Resource
Internal
Measurement
Management->Modify
Configuration
Index 0
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration->UE
Resource
Internal
Measurement
Management->Modify
Configuration
Index 5
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration->UE
Resource
Internal
Measurement
Management->Modify
Configuration
Index 2
Advanced Parameter>UE Internal
Measurement
Configuration->UE
Internal Measurement
Configuration Index 1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
Advanced
>NodeB
Dedicated
NE->RNC Radio
Measurement
Resource
ConfigurationManagement->Modify
>Dedicated
Advanced ParameterMeasurement
Type
View->Configuration
>NodeB Dedicated
Management->RNC
Measurement
NE->RNC
Radio
ConfigurationResource
>Measurement
Management->Modify
Change Time
Advanced
Parameter/Measurement
View->Configuration
>NodeB
Dedicated
HysteresisTime
Management->RNC
Measurement
NE->RNC
Radio
>Measurement
Management->Modify
Threshold 2 of Event
View->Configuration
Advanced
E/F for SIRParameterError
Management->RNC
>NodeB Dedicated
NE->RNC
Radio
Measurement
Resource
>Measurement Filter
Advanced
CoefficientParameter>NodeB
Dedicated
View->Configuration
Measurement
Management->RNC
ConfigurationNE->RNC Radio
>Function
Resource of
Configuration
Management->Modify
Parameters
View->Configuration
>NodeB Dedicated
NE->RNC
Radio
Measurement
Resource
Configuration->Report
Management->Modify
Periodicity Value
>NodeB Dedicated
Management->RNC
Measurement
NE->RNC
Radio
Configuration->Choice
Resource
Report Periodicity
Management->Modify
Scale
Advanced
>NodeB
Dedicated
Management->RNC
Measurement
NE->RNC Radio
Resource
Characteristics
Management->Modify
View->Configuration
Advanced
>UE
Internal
NE->RNC Radio
Measurement
Resource
Configuration->Filter
Management->Modify
CoefficientParameterAdvanced
View->Configuration
>UE Internal
Management->RNC
Measurement
NE->RNC
Radio
>Maximum Event
Management->Modify
Number of UE Internal
Advanced
ParameterMeasurement
>UE Internal
Measurement
Configuration->UE
Quantity
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>UE Internal
Management->RNC
Measurement
NE->RNC
Radio
>Measurement Report
Management->Modify
Transfer Mode
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration->Amount
Resource
of Reporting
Management->Modify
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
>Reporting Interval
Management->Modify
View->Configuration
>UE Internal
NE->RNC
Radio
Measurement
Resource
Management->Modify
Criteria
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC
Radio
Configuration->UE
Resource
Transmitted
Power
Management->Modify
Report
Indicator
Advanced Parameter>UE
Internal
View->Configuration
Measurement
Management->RNC
Configuration->UE
NE->RNC Radio RxTx
Time Difference
Resource
Report
Indicator
Management->Modify
Advanced
>UE Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE
Internal
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
View->Configuration
Advanced
>UE
Internal
NE->RNC
Radio
Measurement
Resource
Configuration
Management->Modify
View->Configuration
>UE Internal
NE->RNC
Radio
Measurement
Resource
Configuration->UE
Management->Modify
Advanced
ParameterConfiguration
Index
>UE Internal
Measurement
Configuration>Function of
Configuration
Parameters
View->Configuration
Management->RNC
NE->RNC Radio
Resource
ManagementN/A
>Modify Advanced
NE->RNC
Radio
>MIMO
S-CPICH
ManagementPower
N/A
>External UTRAN Cell>External
UTRAN Cell
View->Configuration
XXX->Cell MIMO
Management->RNC
Precoding
Weight Set
NE->RNC Radio
Restriction
View->Configuration
Resource Support
Indicator
Management->RNC
N/A
ManagementNE->RNC
Radio
>UltranCellResource
ManagementSetup Parameters>UltranCell>Cell Type
>UltranCellXXXN/A
>Modify Advanced
Parameter->HSPA
View->Configuration
Configuration
Management->RNC
Information
In A CellNE->RNC Radio
>HS-PDSCH Code
Resource
N/A
NodeB
Assignment
Management->CN
Support
Indicator
Configuration1, the connection in NAS
View->Configuration
Attach and
Iu interface may be >IMSI
Management->RNC
Detach
Indicator
invalid; 2, the CN
NE->RNC
Radio
DOMAIN in SIB1
Resource
may change, and
Management->CN
View->Configuration
affect whether the NAS
ConfigurationManagement->RNC
UE can access the >CN
Domain
NE->RNC Radio
UTRAN.
Supported
Resource
Management->Modify
N/A
Advanced
>CN
System
Management->RNC
Information->CS
NE->RNC Radio
Domain
DRX Cycle
Resource
Length Coefficient
Management->Modify
N/A
Advanced Parameter>CN
System
View->Configuration
Information->PS
Management->RNC
Domain
DRX
Cycle
NE->RNC
Radio
Length Coefficient
Resource
N/A
Management->CN
View->Configuration
NAS
>Network
NE->RNC Mode
Radioof
Operation
Resource
View->Configuration
Management->Modify
Management->RNC
N/A
Advanced
>CN
System
Resource
Information->Timer
for
Management->Modify
Periodic
Location
Advanced ParameterUpdate(T3212)
>RNC
Radio Resource
N/A
Management->Wait
Time for RADIO
BEARER
RECONFIGURATION
COMPLETE when
CELL_DCH to
CELL_FACH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
PLMN
Configuration
View->Configuration
Information
XXXManagement->RNC
>Logical RNC
NE->RNC
Radio
Associated
Resource With PLMN
Configuration
ManagementInformationView->Configuration
>UltranCell>Encryption
Algorithm
Management->RNC
NE->RNC
Radio
>Wait Time for RRC
ManagementConnection
>UltranCellReestablishment
View->Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
In A Cell>External
UTRAN
CellView->Configuration
>Cell
Identity
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>Reserved
Parameter
Management1 for External
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
CellCell
XXX->Modify
Advanced Parameter>Reserved Parameter
16 for External UTRAN
Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
Management92for External
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Parameter
UTRAN
>External
UTRAN
CellCell
XXX->Modify
Advanced Parameter>Reserved Parameter
Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>External UTRAN CellNE->RNC
Radio Cell
>External UTRAN
Resource
XXX->Modify
Management->Logical
Advanced ParameterRNC
Associated
With
>Reserved
Parameter
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXCell
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
View->Configuration
RNC
Associated With
Supplement
Management->RNC
PLMN
Configuration
Information->Fast
NE->RNC
Radio
Information
XXXReconfiguraton
Resource
>Modify
Advanced
Support Indication
Management->Logical
Parameter->RNC
RNC
Associated With
Configuration
View->Configuration
PLMN
Configuration
Supplement
Management->RNC
Information
XXXInformation->Global
NE->RNC Radio
>Modify
Advanced
Reserved
Parameter
1
Resource
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
10
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
11
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
12
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
13
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
14
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
>Modify
Advanced
Resource
15
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
PLMN Configuration
Information->Global
Information XXXReserved
Parameter
>Modify Advanced
16
Parameter->RNC
Configuration
Supplement
Information->Global
Reserved Parameter
17
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
View->Configuration
PLMN Configuration
Information->Global
Management->RNC
Parameter
NE->RNC
Radio
>Modify Advanced
18
Resource
Parameter->RNC
Management->Logical
Configuration
View->Configuration
RNC
Associated With
Supplement
Management->RNC
PLMN
Configuration
Information->Global
NE->RNC
Radio
Information
XXXReserved Parameter
Resource
>Modify
Advanced
19
Management->Logical
Parameter->RNC
RNC
Associated With
Configuration
View->Configuration
PLMN
Configuration
Supplement
Management->RNC
Information
XXXInformation->Global
NE->RNC
Radio
>Modify
ReservedAdvanced
Parameter
2
Resource
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
Supplement
View->Configuration
PLMN
Configuration
Information->Global
Management->RNC
Information
XXXReserved Parameter
NE->RNC
Radio
>Modify
Advanced
20
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
3
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
4
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
5
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
6
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->Global
Information
XXXNE->RNC
Radio
Reserved
Parameter
7
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
PLMN
Configuration
Information->Global
Parameter 8
>Modify Advanced
Parameter->RNC
Configuration
Supplement
Information->Global
Reserved Parameter 9
Cell Identity, can

not be modified.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
>Modify Advanced
ManagementParameter->SCCPCH>UltranCell>Cell ID
>Modify Advanced
Management->RNC
Parameter->UE
NE->RNC
Radio
Measurement
Resource
Configuration In
ManagementSystem Information
>UltranCellBlock->Cell ID
View->Configuration
>Ultran
Cell
Global
NE->RNC
Radio
Information->Cell
Resource
Identity
NE->RNC
Radio
>Cell CPC Support
ManagementIndicator
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
1
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
10
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
11
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
12
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
13
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
>UltranCell-14
Parameter->utranCell>Cell Reserved
Parameter 15
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
16
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
17
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
18
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
19
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
2
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
20
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
3
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
4
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
5
>Modify
Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
>UltranCell-6
Parameter 7
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
>Cell
Reserved
ManagementParameter
>UltranCell-8
Parameter
9
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Management->NodeB
Management->RNC
Configuration
NE->RNC Radio
Information->NODEB
Resource
XXX->NodeB
No.
Management->Modify
>RNC Radio Resource
Management->RNC
ManagementNE->RNC
>MaximumRadio
Number of
Resource
Management->Modify
RRC CONNECTION
Advanced
SEUTP ParameterView->Configuration
>RNC Radio Resource
Management->RNC
Management->Interval
NE->RNC
Radio of
of Retransmission
Resource
RRC CONNECTION
Management->Modify
SETUP
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Timer
NE->RNC Radio
for
IU Release
Resource
Resource
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC
Radio
Configuration
XXXResource
>Mobile Country Code
Management->Qos
Congiguration>Scheduling Priority
Management->Mobile
Country Code
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
>Application
Resource Priority
Configuration
Management->Qos
Information->Mobile
Relevance
Country
Code
View->Configuration
Configuration->Qos
Management->RNC
NE->RNC
Radio
Priority Transport
Resource
Reserved Bandwidth
Management->QOS
XXX->Mobile Country
View->Configuration
Relevation
Code
Management->RNC
Configuration->QOS
NE->RNC Radio
Configuration->Access
Resource
Control
Related to
Management->Logical
Basic
Priority->Mobile
RNC Associated With
Country
Code
View->Configuration
PLMN Configuration
Management->RNC
Radio
>Logical RNC
Resource
Management->Logical
Configuration
RNC
Associated With
Information->Mobile
PLMN
CountryConfiguration
Code
View->Configuration
Information
XXX->RNC
Management->RNC
Configuration
NE->RNC Radio
Supplement
Resource
Information->Mobile
Management->Logical
Country
Code With
RNC
Associated
View->Configuration
PLMN
Configuration
Management->RNC
NE->RNC Radio
RNC
XXX->Mobile
Resource
Country Code
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
NE->RNC Radio
RNC
XXX->Mobile
Resource
Country Code
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC
Radio
Configuration
XXXResource
>Mobile Network Code
View->Configuration
Management->Qos
Management->RNC
CongigurationNE->RNC
Radio
>Scheduling
Priority
Resource
Management->Mobile
Management->QOS
Network Code
Relevation
View->Configuration
Configuration->QOS
Management->RNC
>Application
Resource Priority
Configuration
Management->Qos
Information->Mobile
Relevance
Network
Code
Configuration->Qos
Priority Transport
Reserved Bandwidth
XXX->Mobile Network
Code
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
View->Configuration
Relevation
Management->RNC
Configuration->QOS
NE->RNC Radio
Resource
Control
Related to
Management->Logical
Basic
Priority->Mobile
RNC Associated With
Network
Code
View->Configuration
PLMN Configuration
Management->RNC
Radio
>Logical RNC
Resource
Management->Logical
Configuration
RNC
Associated With
Information->Mobile
PLMN
Configuration
Network
Code
View->Configuration
Information
XXX->RNC
Management->RNC
Configuration
NE->RNC Radio
Supplement
Resource
Information->Mobile
Management->Logical
Network
Code With
RNC
Associated
View->Configuration
PLMN
Configuration
Management->RNC
NE->RNC Radio
RNC
XXX->Mobile
Resource
Network Code
Management->Logical
RNC Associated With
PLMN Configuration
View->Configuration
RNC
XXX->Mobile
Management->RNC
Network Code
NE->RNC
Radio
Resource
View->Configuration
Management->RNC
Management->RNC
Configuration
NE->RNC Radio
Resource
Management>External
Eutran CellView->Configuration
>External Eutran Cell
Management->RNC
XXX->Mobile
Country
NE->RNC Radio
Code
Resource
Management>External
>External
Eutran Cell
Management->RNC
XXX->Mobile
Network
NE->RNC Radio
Code
Resource
Management>External Eutran CellView->Configuration
Management->RNC
XXX->MNC BCD Code
NE->RNC
Radio
Length
Resource
Management>External
>External
Eutran Cell
Management->RNC
XXX->ENodeB
NE->RNC RadioType
Resource
Management>External Eutran Cell>External Eutran Cell
XXX->ENodeB ID
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
XXX->Tracking Area
NE->RNC
Radio
Code
Resource
>External Eultran CellManagement->RNC
>Eultran Neighbouring
NE->RNC
RadioIdentity
Cell XXX->Cell
Resource
Management>External
Eultran CellView->Configuration
Management->RNC
Cell
XXX->Neighboring
NE->RNC
Radio
ENodeB
ResourceID
>External
Eultran CellManagement->RNC
NE->RNC
Radio
Cell
XXX->Neighboring
Resource
EUTRAN
Cell Identity
Neighbouring
Cell
View->Configuration
XXX->Does
Management->RNC
Neighbouring
Cell
NE->RNC Radio
Belong
to
Self
Physical
Resource
RNC
Management>External
Management->RNC
XXX->EUTRAN
NE->RNC RadioCell
Identity
Resource
Management->RNC
XXX->Physical
NE->RNC
Radio
EUTRAN Cell
Identity
Resource
NE->RNC Radio
Identity
Resource
Management->RNC
Radio of
>Radio Capacity
View->Configuration
Resource
Cell
Management->RNC
ManagementNE->RNC
RadioCell>External GSM
Resource
>External GSM Cell
Management->Qos
XXX->Routing Area
Relevance
Colour Code
Configuration->Qos
to Network Element>Qos Configuration
Related to Network
Element XXX->PLMN
Number of Sharing the
Network Element
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration
Related
NE->RNC Radio
to Network ElementResource
>Qos
Configuration
Management->Qos
Related
to Network
Relevance
Element
XXX->Mobile
Configuration->Qos
View->Configuration
Country
Code
Configuration
Related
Management->RNC
to NetworkRadio
ElementNE->RNC
>Qos
Configuration
View->Configuration
Resource
Related
to Network
Management->RNC
Management->Modify
Element
NE->RNC
Radio
AdvancedXXX->Mobile
ParameterNetwork
Code
Resource
>RNC Radio Resource
Management->Modify
Management->Time of
Advanced
Waiting forParameterRADIO
>RNC
Radio Resource
LINK RESTORE
Management->Time
of
INDICATION
View->Configuration
Waiting for CELL
Management->RNC
UPDATE After RNC
NE->RNC
Radio
Sending Radio
Link
Resource
Deactivation
Management->Modify
Command for RB
View->Configuration
Advanced
ParameterSetup/Reconfiguration/
Management->RNC
>RNC
Radio
Resource
Release
Response
NE->RNC
Radio
Management->Waiting
Timer Expiration
Resource
time length for ACTIVE
Management->Modify
SET UPDATE
Advanced
ParameterCOMPLETE
View->Configuration
>RNC Radio Resource
Management->RNC
Management->Time of
NE->RNC
Waiting forRadio
RB
Resource
Setup/Reconfiguration/
Management->Modify
Release Response
View->Configuration
Advanced
Parameterover Uu Interface
Management->RNC
>RNC Radio Resource
NE->RNC
Radio
Management->Time
of
Resource
Waiting for RRC
Management->Modify
CONNECTION
Advanced
ParameterCOMPLETE
>RNC
Radio
Resource
View->Configuration
Management->Switch
Management->RNC
of
Fast Reconfiguration
NE->RNC
Radio
Function
ResourceWhen the HS
Service Cell was
Management->Modify
Changed
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management->Waiting
Resource
Time for SRNS
Management->Modify
Context Request
>RNC Radio Resource
Management->RNC
Management->Waiting
NE->RNC
RadioDATA
Timer for SRNS
Resource
FORWARD
Management->Modify
COMMAND
Advanced Parameter>RNC Radio Resource
Management->Waiting
Timer for IU RELEASE
COMMAND
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>RNC Radio Resource
Management->RNC
Management->The
NE->RNC
Radiothat
Time Threshold
Resource
the RNC May Resend
Management->Modify
the MEASUREMENT
Advanced
CONTROLParameterRELEASE
View->Configuration
>RNC Radio Resource
Management->RNC
Management->InterNE->RNC
FrequencyRadio
Balance
Resource
Switch Based on
Management->Modify
Measurement
View->Configuration
>Cfn Offset
NE->RNC
Radio
Configuration
Resource
Information->Signalling
Management->Modify
Service Type
View->Configuration
>Cfn Offset
NE->RNC
Radio
Configuration
Resource
Information->Fast
Management->Modify
ReConfiguration Sence
Advanced
Indicator Parameter>Cfn Offset
View->Configuration
Configuration
Management->RNC
Information->Data
NE->RNC
RadioRate
Retransmission
Resource
Factor over Uu
Management->Modify
Interface
Advanced
>Cfn Offset
Management->RNC
Configuration
NE->RNC Radio
Information
Resource
Management->Modify
Advanced
>Cfn Offset
Management->RNC
Configuration
NE->RNC Radio
Information
Resource
Management->RNC
ConfigurationView->Configuration
>Network Resource
Management->RNC
Identifier Bit Num in
NE->RNC
CS DomainRadio
View->Configuration
Resource
Management->RNC
Management->RNC
NE->RNC Radio
Configuration->Naming
Resource
attribute
of
Management->Logical
RncFunction
RNC Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Logical
RNC
Resource
Associated
With PLMN
Management->Logical
Configuration
RNC Associated With
Information->Special
PLMN
Configuration
Network
Resource
Information
XXXIdentifier
in CS Domain
>Logical RNC
Configuration
Information->Special
Network Resource
Identifier in PS Domain
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>UE
Intra-frequency
Management->RNC
Measurement
Relative
NE->RNC Radio
to
Traffic
Category
Resource
Configuration
Management->Modify
Information->Detected
Advanced ParameterSet Measurement
View->Configuration
>UE
Intra-frequency
Configuration
for
Management->RNC
Measurement Index
Relative
CPICH
Ec/No
NE->RNC
Radio
to Traffic Category
Resource
Configuration
Management->Modify
Information->Detected
Advanced
ParameterSet Measurement
View->Configuration
>UE
Intra-frequency
Configuration
Index for
Management->RNC
Measurement
Relative
CPICH
RSCP
NE->RNC Radio
to Traffic Category
Resource
Configuration
Management->Modify
Information->UE
Event
Advanced
Report
Configuration
>UE
Intra-frequency
Management->RNC
Index
for CPICH
Ec/No
Measurement
Relative
NE->RNC Radio
to Traffic Category
Resource
Configuration
Management->Modify
Information->UE
Event
Advanced
Report
Configuration
>UE
Intra-frequency
Management->RNC
Index
for CPICH
RSCP
Measurement
Relative
NE->RNC Radio
to Traffic Category
Resource
Configuration
Management->Modify
Information->Period
Advanced ParameterReport
Configuration
>UE Intra-frequency
Index
for
CPICH
Ec/No
Measurement
Relative
View->Configuration
to Traffic Category
Management->RNC
Configuration
NE->RNC Radio
Information->Period
Resource
Report
Configuration
Management->Modify
Index
for
CPICH
RSCP
Advanced
>RNC Radio Resource
Management->RNC
Management->HSDPA
NE->RNC Radio
Associate
Resource CM Method
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management->HSUPA
Resource
Associate CM Method
Management->Modify
>RNC Radio Resource
Management->RNC
Management->Timer
NE->RNC
Radio
for Event 1D
in HSPA
Resource
or MBMS
Management->Modify
Advanced
>UE
Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced Parameter>UE Intra-frequency
Measurement
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC
Radio
Resource
Coefficient
View->Configuration
Management->Modify
Management->RNC
Radio
>UE Intra-frequency
Resource
Measurement
Management->Modify
Configuration
Advanced
>UE
Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration->IntraResource
frequency
Management->Modify
Measurement
Advanced
Index
>UE Intra-frequency
View->Configuration
Measurement
Management->RNC
ConfigurationNE->RNC
Radio
>Function of
Resource
Configuration
View->Configuration
Management->Modify
Parameters
Management->RNC
Radio
>UE Intra-frequency
Resource
Measurement
Management->Modify
Configuration
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC
Radio
Configuration->Event
Resource
Number of IntraManagement->Modify
frequency
Advanced
View->Configuration
>UE
Intra-frequency
Management->RNC
Measurement
NE->RNC
Radio
>Measurement
Management->Modify
Quantity
Advanced
>UE
Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Resource
of
Reporting in Period
Management->Modify
Report
Criteria
Advanced
Parameter>UE
Intra-frequency
View->Configuration
Measurement
Management->RNC
>Reporting
Resource Interval in
Period
Report Criteria
Management->Modify
View->Configuration
>UE Intra-frequency
NE->RNC
Radio
Measurement
Resource
Configuration
Management->Modify
Advanced Parameter>UE Intra-frequency
Measurement
Criteria
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
>UE Intra-frequency
Management->RNC
Measurement
NE->RNC
Radio
Configuration
View->Configuration
Resource
Management->RNC
ManagementNE->RNC
Radio
>UltranCellResource
ManagementIdentity
>UltranCell>UltranCellXXX>Modify
Advanced
View->Configuration
Parameter->Balance
Management->RNC
NE->RNC
Radio
View->Configuration
of
CS Handover for
Resource
Management->RNC
CS+PS
in Multi-Carrier
ManagementNE->RNC
Radio
Scenario
>UltranCellResource
ManagementFrequency
>UltranCell-Reselection
and
Priority
Parameter->UE
View->Configuration
Measurement
Management->RNC
View->Configuration
Configuration
In
NE->RNC
Radio
Management->RNC
System
Information
Resource
NE->RNC
Radio
Block->Intra-frequency
ManagementResource
Measurement
>UltranCellManagement->Logical
Configuration Index
>UltranCellXXXRNC Associated With
>Model
ParametersPLMN Configuration
>Load
Balance
Scene
RNC XXX->Modify
Advanced Parameter>Iu Interface Timers
and Constants
Information->Maximum
Number of
RESOURCE RESET
Message
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
PLMN Configuration
RNC XXX->Modify
Advanced
Management->RNC
and
Constants
NE->RNC
Radio
Resource
Number
of
Management->Modify
Retransmissions
of the
View->Configuration
Advanced ParameterRESOURCE
RESET
Management->RNC
>RNC Radio Resource
Message
NE->RNC
Radio
Management->Timer
Resource
for State Query
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Possible
NE->RNC Radio
Secondary
Resource Serving
Cell ID
UTRAN Cell
View->Configuration
XXX->Dual-Cell
HSManagement->RNC
DSCH
Support
NE->RNC Radio
Indication
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX
NE->RNC Radio
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX
NE->RNC Radio
Resource
Management->NodeB
View->Configuration
Configuration
Management->RNC
Information->NODEB
NE->RNC
Radio
XXX
Resource
Management->NodeB
View->Configuration
Configuration
Management->RNC
Information->NODEB
NE->RNC
Radio
XXX->Number
of
Resource
PLMN for RAN Sharing
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC Radio
Priority
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC Radio
Priority
Management->QOS
Relevation
Configuration->QOS
Priority Configuration>ARP Segment
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC Radio
Priority
>Basic Priority
Management->QOS
View->Configuration
Relevation
Management->RNC
Configuration->QOS
NE->RNC
Radio
Resource
Priority ConfigurationManagement->Modify
>Traffic Class
View->Configuration
>HSPA Configuration
NE->RNC
Radio
Information->Support
Resource
Type of Downlink RLC
Management->Modify
Flexible PDU Size
Advanced
ParameterFormat
View->Configuration
>RNC
Radio
Resource
Management->RNC
ManagementNE->RNC Radio
>Downlink
Resource NonConversational
Service
Management->QOS
Maximum MAC-d PDU
Relevation
View->Configuration
Size
Extended
Configuration->QOS
Management->RNC
>Application
Resource Priority
Configuration
Management->QOS
Information->Mobile
Relevation
View->Configuration
Country
Code
Configuration->QOS
Management->RNC
>Application
Resource Priority
Configuration
Management->QOS
Information->Mobile
View->Configuration
Relevation
Network
Code
Management->RNC
Configuration->QOS
NE->RNC
Radio
>Application Priority
Management->QOS
Configuration
Relevation
InformationView->Configuration
Configuration->QOS
Management->RNC
Radio
>Application
Priority
Resource
Configuration
Management->QOS
InformationRelevation
View->Configuration
Configuration->QOS
Index
Management->RNC
>Application
Resource Priority
Configuration
Management->QOS
View->Configuration
Information->Radio
Relevation
Management->RNC
Bearer
Type
Configuration->QOS
NE->RNC Radio
>Application
Priority
Management->QOS
Configuration
Relevation
Information->Basic
Configuration->QOS
Priority
Segment
Configuration>Application Priority
Configuration
Direction Used in
Application Priority
Mapping
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
>Application
Resource Priority
Configuration
ManagementInformation->Rate
View->Configuration
>UltranCellSegment
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->Cell
ManagementSelection and
>UltranCellReselectionView->Configuration
>UltranCellXXX>Qqualmin-offset
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->Cell
Resource
Selection and
ManagementReselectionView->Configuration
>UltranCell>Qqualmin-offset
Management->RNC
>UltranCellXXXPresent
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Cell
>UltranCellReselection>UltranCellXXX>Qrxlevmin-offset
View->Configuration
>Modify
Advanced
Management->RNC
Parameter->Cell
NE->RNC
Radio
Selection
Resource and
ReselectionManagement>Qrxlevmin-Offset
Present
Management->RNC
Ability and Radio
Cell
NE->RNC
ReselectionResource
>Maximum
Number of
View->Configuration
ManagementUsers
on
E-DCH
Management->RNC
>UltranCellNE->RNC
Radio
Resource
Ability and Cell
ManagementReselection>UltranCell>Maximum Number of
View->Configuration
>UltranCellXXXUsers on HS-DSCH
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
ManagementInformation In A Cell>UltranCell>Maximum Target
View->Configuration
>UltranCellXXXReceived
Total
Management->RNC
>Modify
Advanced
Wideband
Power
NE->RNC Radio
Parameter->MBMS
Resource
Configuration
>UltranCell-In A Cell>MBMS
Throughput
>UltranCellXXXThreshold
View->Configuration
>Modify Advanced
Management->RNC
Parameter->MBMS
NE->RNC
Radio
Configuration
Resource
Information In A CellManagement>MBMS Traffic
>UltranCellNumber Limit
Parameter->EFACH
Configuration
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
N/A
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
N/A
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
View->Configuration
>UltranCellNE->RNC
Radio
>Modify Advanced
ManagementParameter->EFACH
>UltranCellConfiguration
View->Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
ConfigurationManagement>Enhanced
>UltranCellCELL_FACH
HS>UltranCellXXXPDSCH
Power
View->Configuration
>Modify Advanced
Management->RNC
Parameter->EFACH
NE->RNC
Radio
>Enhanced
ManagementCELL_FACH HS>UltranCellSCCH Power
View->Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration
Parameter->EFACH
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC Radio
Configuration
XXXResource
Management->Qos
View->Configuration
Relevance
Management->RNC
Configuration->Qos
NE->RNC
Radio
Configuration->Qos
Resource
Configuration XXXManagement->Qos
Relevance
Configuration->Qos
View->Configuration
Configuration->Qos
Management->RNC
Configuration
XXXNE->RNC Radio
>ARP
Segment
Resource
Number
Management->Qos
View->Configuration
Relevance
Management->RNC
Configuration->Qos
NE->RNC
Radio
Configuration->Qos
Resource
Configuration
XXX
Management->Qos
Relevance
Configuration->Qos
View->Configuration
Configuration->Qos
Management->RNC
Configuration
XXXNE->RNC Radio
>Basic
Priority
Resource
Segment
Number
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC Radio
Configuration
XXX
Resource
Management->Qos
View->Configuration
Relevance
Management->RNC
Configuration->Qos
NE->RNC
Radio
Configuration->Qos
Resource
Configuration
XXX
Management->Qos
Relevance
Configuration->Qos
View->Configuration
Configuration->Qos
Management->RNC
Configuration
XXXNE->RNC Radio
>THP
Segment
Resource
Number
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
View->Configuration
NE->RNC
Radio
Configuration
XXX
Management->RNC
Resource
NE->RNC
Radio
Management->HSPA
Resource
Configuration->DualManagement->Logical
Cell HS-DSCH Support
RNC
Associated With
Indication
PLMN Configuration
Information XXX>Modify Advanced
Parameter->RNC
to PLMN->Switch for
RL Reference Time
Adjust During Diversity
Mode
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
Management->RNC
>TransportRadio
Band Width
Resource
Management->Qos
CELL_FACH
CongigurationView->Configuration
>Scheduling Priority
Management->RNC
Management->Basic
NE->RNC Radio
Priority
Resource
Management->Qos
View->Configuration
CongigurationManagement->RNC
NE->RNC
Radio
Management->Radio
Resource
Bearer Type
Management->Qos
Management->RNC
ManagementNE->RNC
Radio
>Scheduling
Priority
Resource
Index
Management->Qos
Management->RNC
>Scheduling
Priority
Resource
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
Radio
>UTRAN
ResourceCell Global
Information
View->Configuration
Setup
>Cell
Downlink
NE->RNC Radio
Enhanced
Resource Layer 2
Support
Indicator
>UTRAN
Global
NE->RNCCell
Radio
Information
Resource
Radio
>UTRAN Cell
Global
Resource
Information
Setup Parameters>Dual-Cell HS-DSCH
Support Indication
Triggering
PHYSICAL
SHARED
CHANNEL
RECONFIGURATI
ON
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
View->Configuration
Resource
Setup ParametersManagement->RNC
Management>Downlink Enhanced
NE->RNC
Radio
>UltranCellCELL_FACH
Support
Resource
>UltranCellXXXIndicator
Management>Modify Advanced
>UltranCellParameter->NodeB
View->Configuration
>UltranCellXXXCommon
Management->RNC
>Modify
Advanced
Measurement
NE->RNC
Radio
Parameter->NodeB
Configuration
Resource
Common
Information
In A CellManagementMeasurement
>Cell
Identity
View->Configuration
>UltranCellXXXInformation
In A CellManagement->RNC
>Modify Advanced
>Period
NodeB
NE->RNC
Radio
Parameter->NodeB
Common
Resource
Common
Measurement
ManagementMeasurement
Configuration
>UltranCellConfiguration Index for
View->Configuration
HS-DSCH
Required
In A CellManagement->RNC
Power
>Modify
Advanced
>Period NodeB
NE->RNC
Radio
Parameter->NodeB
Common
Resource
Common
Measurement
View->Configuration
Configuration Index 1
Management->RNC
for
NotusedHS>UltranCellXXXInformation
In A CellNE->RNC
Radio
DSCH_TCP
>Modify Advanced
>Period NodeB
Resource
Parameter->NodeB
Common
ManagementCommon
Measurement
>UltranCellMeasurement
Configuration
>UltranCellXXXConfiguration Index for
RTWP
>Modify
Advanced
Information
In A CellParameter->NodeB
>Period NodeB
View->Configuration
Common
Common
Management->RNC
Measurement
Measurement
NE->RNC
Radio
Configuration
Configuration
Index for
Resource
Information
In A CellTCP
Management->QOS
>Period NodeB
Relevation
Common
View->Configuration
Configuration->QOS
Measurement
Management->RNC
NE->RNC
Radioto
Control
Related
Received
Scheduled
Resource
Basic
E-DCHPriority->Basic
Power Share
Management->QOS
Priority Used in
Relevation
Admission
Control
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC Radio
Control
Related to
Resource
Basic
Priority->Basic
Management->QOS
Priority
AC Index
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC Radio
Control
Related to
Resource
Basic
Priority->Code
Management->QOS
Tree
Reserved Ratio
Relevation
Configuration->QOS
Control Related to
Basic Priority->DCH
Downlink AC Threshold
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->QOS
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC
Radio
Control
Related to
Resource
Basic
Priority->DCH
Management->QOS
Uplink
AC Threshold
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC
Radio
Control
Related to
Resource
Basic
Priority->E-DCH
Management->QOS
AC
Threshold
Relevation
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC
Radio
Control
Related to
Resource
Basic
Priority->HSDPA
View->Configuration
Management->QOS
AC
Threshold
Management->RNC
Relevation
NE->RNC
Radio
Configuration->QOS
Resource
Management->QOS
Control Related to
Relevation
Basic Priority->MBMS
Configuration->QOS
AC Threshold
View->Configuration
Management->RNC
Control
Related
NE->RNC
Radioto
Basic
Priority->Offset
Resource
of
NodeB Safe
Management->QOS
Admission Threshold
Relevation
When
DCH Has Higher
View->Configuration
Configuration->QOS
AC
Priority
Than HS
Management->RNC
NE->RNC
Radio
Control Related to
Resource
Basic Priority->MBMS
Management->QOS
Load Threshold
Relevation
Reference
for Counting
View->Configuration
Configuration->QOS
Management->RNC
NE->RNC
Radio
Control
Related to
Resource
Basic
Priority->Mobile
Management->QOS
Country
Code
View->Configuration
Relevation
Management->RNC
Configuration->QOS
NE->RNC
Radio
Resource
Control Related to
ManagementBasic Priority->Mobile
>UltranCellNetwork Code
View->Configuration
>Modify
Advanced
NE->RNC
Radio
>Background
Management-Noise
>UltranCellSwitch
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Cell Downlink
ManagementAdmission Control
>UltranCellSwitch
Parameter->utranCell>Original Background
Noise Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
>Nominal Pathloss
>Modify
Advanced
NE->RNC
Radio
Parameter->utranCell
Resource
View->Configuration
>UltranCellNE->RNC Radio
>Modify
Advanced
ManagementParameter->utranCell
>Modify
Advanced
Management->RNC
Radio
>Maximum
Resource Number of
Users
on Downlink
ManagementEnhanced
CELL_FACH
Management->RNC
Radio
>Background
Noise
Resource
Automatic
Adjustment
Management->Modify
Scene
Advanced
>NodeB
Common
Management->RNC
Measurement
NE->RNC
Radio
>Common
Management->Modify
Measurement
Type
View->Configuration
>NodeB Common
NE->RNC
Radio
Measurement
Resource
>Measurement Filter
Advanced
CoefficientParameterView->Configuration
>NodeB
Common
Management->RNC
Measurement
NE->RNC Radio
>Common
Management->Modify
Measurement
Object
Advanced
Type
>NodeB
Common
Management->RNC
Measurement
NE->RNC Radio
Configuration->NodeB
Resource
Common
Management->Modify
Measurement
Advanced
Index
>NodeB
Common
View->Configuration
Measurement
Management->RNC
>Function
Resource of
Configuration
Management->Modify
Parameters
Advanced Parameter>NodeB Common
Measurement
Period
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>NodeB Common
Management->RNC
Measurement
NE->RNC
Radio
Configuration->Choice
Resource
Report Periodicity
Management->Modify
Scale
>NodeB Common
Management->RNC
Measurement
NE->RNC
Radio
Resource
Characteristics
Radio
>Modify Advanced
Resource
>Modify Advanced
NE->RNC
Radio
>Default CPICH Ec/No
Management->Modify
View->Configuration
Advanced
>Global Access
NE->RNC
Radio
Control
InformationResource
>True
Queue Length
Management->Modify
Advanced
>Global
Access
Management->RNC
Control InformationNE->RNC
Radio
>Time
of True Queue
Resource
for
Congested Service
View->Configuration
Management->Modify
in
RAB
Setup
Process
Management->RNC
Advanced
ParameterNE->RNC
Radio
>Global Access
Resource
Control InformationManagement>Time of True Queue
>UltranCellfor Congested Service
>UltranCellXXXRelocating into UTRAN
View->Configuration
>Modify Advanced
Management->RNC
Parameter->Load
NE->RNC
Radio
Control InformationResource
>Switch of Required
Management->Qos
Rate Decreasing for
Relevance
Online Users in
Configuration->Qos
Congestion
View->Configuration
Configuration->Qos
Management->RNC
Configuration
XXXNE->RNC Radio
>DCH
Uplink
Nominal
Resource
Bit
Rate
Management->Modify
>Traffic-Related Power
Management->RNC
Control->Tolerance
NE->RNC
Radio
BLERPeriod
Resource
Management->Modify
Advanced Parameter>Traffic-Related Power
Control->BLER Target
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
NE->RNC
Radio
Control
Resource
Management->Modify
View->Configuration
>Service Basic
NE->RNC
Radio
Configuration
Resource
Information
Management->Modify
View->Configuration
Advanced
>Traffic-Related
NE->RNC Radio Power
Control->Error
Resource
Transport
Block
Management->Modify
Number Threshold
Advanced
Parameter>Service Basic
Configuration
View->Configuration
Management->RNC
Number
of Radio
NE->RNC
Retransmissions for EResource
DCH
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control
NE->RNC Radio
Resource
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
Advanced
>Traffic-Related
Power
Resource
Control
Management->Modify
Advanced Parameter>Traffic-Related
Power
View->Configuration
Control->The
Number
Management->RNC
Threshold
of Physical
NE->RNC Radio
Channel
BER
Less
Resource
Than or Equal BER
Management->Modify
Target
Advanced
>Traffic-Related
Power
Management->RNC
Control->Physical
NE->RNC Radio
Channel
ResourceBER Target
For Normal Mode
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control->Physical
NE->RNC Radio
Channel
ResourceBER Target
For Silent Mode
Management->Modify
Control->Step Size of
Downlink Inner Loop
Power Control
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Management->RNC
Control->->Step Size
NE->RNC
Radio
of Uplink Inner
Loop
Resource
Power Control
Management->Modify
View->Configuration
NE->RNC
RadioPC
Control->Traffic
Resource
Index
Management->Modify
Management->RNC
Control->Uplink Inner
NE->RNC
Radio
Loop Power
Control
Resource
Algorithm
Management->Modify
Advanced
Management->RNC
Control->Uplink
NE->RNC RadioSIR
Target
Down Step Size
Resource
Management->Modify
View->Configuration
NE->RNC
RadioSIR
Control->Uplink
Resource
Target Up Step Size
Management->Modify
View->Configuration
NE->RNC
RadioSIR
Control->Uplink
Resource
Target Maximum Down
ManagementStep Size
Management->RNC
Radio
>Cell
Uplink Enhanced
Resource
Layer
2 Support
Management->Modify
Indicator
Advanced
>HSPA
Configuration
Management->RNC
Information->Support
NE->RNC Radio
Type
of Uplink RLC
Resource
Flexible
PDU Size
Management->Modify
Format
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Uplink
NE->RNC Radio
Conversational
Service
Resource
Maximum
Uplink
RLC
Management->Modify
PDU
Size
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Uplink
NE->RNC Radio
Conversational
Service
Resource
Minimum
Uplink
RLC
Management->Modify
PDU
Size
Management->Uplink
Non-Conversational
Service Maximum
Uplink RLC PDU Size
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>RNC Radio Resource
Management->RNC
Management->Uplink
NE->RNC
Radio
Non-Conversational
Resource
Service Minimum
ManagementUplink RLC PDU Size
>External UTRAN CellView->Configuration
Management->RNC
XXX->Adjacent Cell
NE->RNC
Radio Layer
Uplink Enhanced
Resource
2 Support Indicator
View->Configuration
Management->Modify
Management->RNC
Radio Power
>Traffic-Related
Resource
Control->Physical
Management->Modify
Channel BER Target
View->Configuration
Advanced
>RNC
Radio
Resource
NE->RNC Radio
Management->BER
Resource
Target
Adjust Timer in
Management->Modify
Fast
OLPC
SIR Target
Downward Adjustment
>Traffic-Related
Power
Management->RNC
Based
on BER
Control->Error
NE->RNC Radio
Transport
Resource Block
Number
Threshold for
Management->Modify
BER
Target
Adjust in
Advanced ParameterFast OLPC SIR Target
>Traffic-Related
Power
View->Configuration
Downward
Adjustment
Control->Transport
Management->RNC
Based
on BER
Block
Number
NE->RNC
Radio
Threshold
Resource for BER
Target
Adjust in Fast
Management->Modify
OLPC SIR ParameterTarget
Advanced
View->Configuration
Downward
Adjustment
>Traffic-Related
Power
Management->RNC
Based
on
BER
Control->BER
Target
NE->RNC Radio
Down
Step Size in
Resource
Fast
OLPC
SIR Target
Management->Modify
DownwardParameterAdjustment
View->Configuration
Advanced
Based
on BER Power
Management->RNC
>Traffic-Related
NE->RNC
Radio
Control->BER
Target
Resource
Up Step Size in Fast
Management->Modify
OLPC SIR Target
Advanced
DownwardParameterAdjustment
View->Configuration
>RNC
Radio
Resource
Based
on BER
Management->RNC
>Maximum
Resource BER Target
in
Fast OLPC SIR
Management->Modify
Target
Downward
Advanced
ParameterAdjustment
on
View->Configuration
>RNC RadioBased
Resource
BER
Management->RNC
ManagementNE->RNC
>Minimum Radio
BER Target
Resource
in Fast OLPC SIR
Management->Modify
Target Downward
Advanced
AdjustmentParameterBased on
>Traffic-Related
Power
BER
Control->Threshold of
HARQ Failure
Indication Number to
Adjust SIR Target
Upward (10ms E-TTI)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->MBMS
Resource
Configuration
ManagementInformation In A CellView->Configuration
>UltranCell>Cell
Counting Switch
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->MBMS
View->Configuration
Management->RNC
>UltranCellInformation In A CellNE->RNC
Radio
>UltranCellXXX>Cell Identity
Resource
>Modify Advanced
ManagementParameter->UE Traffic
>UltranCellVolume
Measurement
View->Configuration
>UltranCellXXXConfiguration
Management->RNC
>Modify
Advanced
Information
In A CellNE->RNC
Radio
Parameter->UE
>Cell Identity Traffic
Resource
Volume
Measurement
Information
In A Cell>UltranCellXXXManagement->RNC
>UE Traffic
Volume
>Modify
Advanced
NE->RNC
Radio
Event
Measurement
Parameter->UE
Traffic
Resource
Configuration
Number
Volume
Measurement
Managementfor
DCH
Configuration
Information
>UE Traffic
Volume
>Modify
Advanced
NE->RNC
Radio
Period
Measurement
Parameter->UE
Traffic
Resource
Configuration
Number
Volume
Measurement
Managementfor
DCH
Configuration
Information
>UPTraffic
Volume
>Modify
Advanced
NE->RNC
Radio
Measurement
Parameter->UE
Traffic
Resource
Configuration
Number
Volume
Measurement
for
DCH
Configuration
Information
In A Cell>UltranCellXXXNE->RNC
Radio
>UP Traffic
Volume
>Modify
Advanced
Resource
Measurement
Parameter->UE
Traffic
Number
Volume
Measurement
>UltranCellfor
E-DCH
Configuration
Information
In A Cell>Modify Advanced
Management->RNC
>UPTraffic Volume
Parameter->UE
NE->RNC
RadioTraffic
Measurement
Volume
Measurement
Resource
Configuration
Number
Configuration
Managementfor
FACH
Information
In A Cell>UltranCellView->Configuration
>UP
Traffic
Volume
Measurement
>Modify
Advanced
NE->RNC
Radio
Configuration
Number
Parameter->UE
Traffic
Resource
for
Interactive
and
Volume
Measurement
ManagementBackground
Class on
Configuration
>UltranCellHS-DSCH
Information
In A Cell>UltranCellXXX>UETraffic
Volume
>Modify
Advanced
Event
Measurement
Parameter->UE
Traffic
Configuration
Number
Volume Measurement
for
RACH
Configuration
Information In A Cell>UE Traffic Volume
Period Measurement
for RACH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->UE
Traffic
Resource
Volume
Measurement
>UltranCellInformation
In A Cell>UltranCellXXX>UP
Traffic
Volume
>Modify
Advanced
View->Configuration
Measurement
Parameter->UE
Traffic
Management->RNC
Configuration
Number
Volume
Measurement
NE->RNC
Radio
for
Streaming
Class on
Configuration
Resource
HS-DSCH
Information
In
A CellManagement->Logical
View->Configuration
>E-DCH
UP
RNC
Associated With
Management->RNC
Throughput
PLMN
Configuration
NE->RNC
Radio
Measurement
Resource
Configuration
Number
RNC XXX->DRBC
Management->Logical
for
E-TTI
Switching
Controlling
View->Configuration
RNC Associated With
Configuration
Management->RNC
PLMN Configuration
Information->Switch
of
NE->RNC
Radio
CS
voice
over
HSPA
Resource
RNC XXX->Modify
Management->Logical
Associated
>Dynamic
Radio With
View->Configuration
PLMN
Bearer Configuration
Controll
Management->RNC
Information->Quality
NE->RNC
Radio
RNC
XXX->Modify
Measurement
Switch
Resource
Advanced
Parameterfor VoIP/ CS
Voice
Management->Logical
>Dynamic
Radio With
RNC
Associated
View->Configuration
Bearer
Controll
PLMN Configuration
Management->RNC
Information->C Traffic
NE->RNC
RadioUsed
Rate
Threshold
RNC
XXX->Modify
Resource
for
Determining
NRT
Advanced
ParameterManagement->Logical
PS
Rate
Upper
Limit
>Dynamic
Radio With
RNC
Associated
View->Configuration
Bearer
Controll
PLMN Configuration
Management->RNC
Information->Switch for
NE->RNC
Radio
DCH
Rate
Adjustment
RNC
XXX->Modify
Resource
Based
on
Traffic
Advanced
Volume
Measurement
>Dynamic
Radio With
RNC
Associated
View->Configuration
Bearer
Controll
PLMN Configuration
Management->RNC
Information->Event 4A
NE->RNC
Radio for
Counter
Threshold
RNC
XXX->Modify
Resource
Increasing
Rate on
Advanced
DCH
or
DCH->HSPA
>Dynamic
Radio With
RNC Associated
Bearer
Controll
PLMN Configuration
Information->Event 4B
View->Configuration
Counter
Threshold for
RNC
XXX->Modify
Management->RNC
Decreasing
Rate on
Advanced
ParameterNE->RNC
Radio
DCH
>Dynamic
Resource Radio
Bearer
Controll
Management->Modify
View->Configuration
Information->Switch
for
Advanced
DL
DCH
RateResource
>RNC
Radio
NE->RNC
Radio
Adjustment
Based on
Management->Wait
Resource
D-TCP
Timer
for Adjusting
Management->Logical
Uplink
and Downlink
RNC Associated
With
Reconfiguration
by
PLMN
Configuration
One
Step Downward
RNC XXX->Modify
Advanced Parameter>Dynamic Radio
Bearer Controll
Information->DRBC
Method Switch
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
View->Configuration
RNC
Associated With
Management->RNC
PLMN
Configuration
NE->RNC
Radio
Resource
RNC
XXX->Modify
Management->Logical
Advanced
ParameterRNC Associated
With
>Dynamic
Radio
PLMN
Configuration
Bearer
Controll
Information->Event
RNC
XXX->Modify A
View->Configuration
Counter
Threshold
for
Advanced
PS
on
DL
DCH
or
DL
>Dynamic
Radio
NE->RNC
Radio
AMR
Decreasing
Bearer
Controll Rate
Resource
View->Configuration
on
D-TCP
Information->Event
B
Management->Modify
Management->RNC
Counter
Threshold
for
Advanced
ParameterNE->RNC
Radio
Restriction
PSResource
>RNC
Radio
Resource
Increasing
Rate
on DL
Management->Delay
Management->Logical
DCH
or
Triggering
DL
Time Associated
Threshold ofWith
D/DRNC
View->Configuration
AMR
Increasing
Rate
>HS/D
or
HS/E
after
PLMN
Configuration
Management->RNC
Based
D-TCP
HS/D
oronHS/E->D/D
NE->RNC
Radio
Triggering
by
Channel
RNC
XXX->Modify
Resource
Quality
Advanced
View->Configuration
>Dynamic
Radio With
RNC
Associated
Management->RNC
Bearer
Controll
PLMN
Configuration
NE->RNC
Radio 4B
Information->Event
Resource
Counter
Threshold for
RNC
XXX->Modify
Management->Logical
CELL_DCH
to Idle
Advanced
ParameterRNC
Associated
With
Shared
by
Uplink
>Dynamic
Radio and
PLMN
Configuration
View->Configuration
Downlink
Bearer
Controll
Management->RNC
Information->Event
4B
RNC
XXX->Modify
NE->RNC
Radio for
Counter
Threshold
Advanced
ParameterResource
CELL_DCH
to PCH
>Dynamic
Radio
Management->Logical
Shared
by
Uplink
and
Bearer
Controll With
RNC
Associated
Downlink
Information->Event
PLMN
Configuration4B
View->Configuration
Counter
Threshold for
Management->RNC
HSPA
Using
DTX/DRX
RNC
XXX->Modify
NE->RNC
Radiousing
or
CELL_FACH
Advanced
ParameterResource
DRX
to PCH
or IDLE
>Dynamic
Radio
Management->Logical
View->Configuration
Shared
by Uplink and
Bearer
Controll
RNC
Associated With
Management->RNC
Downlink
Information->Event
4A
PLMN
Configuration
NE->RNC
Radio for
Counter
Threshold
Resource
CELL_FACH
to
RNC
XXX->Modify
Management->Logical
CELL_DCH
Shared
by
Advanced
RNC
Associated
With
Uplink
and
Downlink
>Dynamic
Radio
Management->RNC
PLMN Configuration
Bearer
Controll
NE->RNC
Radio
Information->Switch
Resource
RNC XXX->Modify of
Transferring
to
Management->Logical
Advanced ParameterCELL_FACH
RNC
Associated
>Dynamic
Radio With
View->Configuration
PLMN
Controll
Management->RNC
NE->RNC
Radio for
RNC
XXX->Modify
Counter
Threshold
Resource
Advanced
ParameterCELL_FACH without
Management->Logical
>Dynamic
DRX to IdleRadio
Shared by
RNC
With
Bearer
Controll
UplinkAssociated
and
Downlink
PLMN
Configuration
Counter Threshold for
RNC
XXX->Modify
CELL_FACH
without
Advanced
ParameterDRX to PCH
Shared
>Dynamic
Radio
by Uplink and
Bearer
Controll
Downlink
Information->HS/D>D/D or HS/E->D/D
Based on Quality
Measurement Switch
for I/B Traffic
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
View->Configuration
PLMN Configuration
Management->RNC
NE->RNC
Radio
RNC XXX->Modify
Resource
>Dynamic Radio
RNC
Associated
Bearer
Controll With
PLMN
Configuration
Information->Initial
Rate
of DL DCH
View->Configuration
RNC XXX->Modify
Management->RNC
Advanced
View->Configuration
>Dynamic
Management->RNC
Resource Radio
Bearer
Controll
NE->RNC
Radio
Management->Modify
Information->
Resource
>RNC Radio Resource
RNC
Associated With
Management->Max
CS
View->Configuration
PLMN
Delay Configuration
Management->RNC
NE->RNC
Radio
RNC XXX->Modify
Resource
>Dynamic Radio
View->Configuration
RNC
Associated
Bearer
Controll With
Management->RNC
PLMN
Configuration
Information->Time
NE->RNC
Radio
Threshold
Resource for
RNC
XXX->Modify
CELL_PCH
or
Management->Logical
Advanced
ParameterURA_PCH
to
IdleWith
RNC
Associated
View->Configuration
>Dynamic
Radio
PLMN
Configuration
Management->RNC
Bearer
Controll
NE->RNC
Radio
Information->Switch
RNC
XXX->Modify of
Resource
URA_PCH/CELL_PCH
Advanced
Support
>Dynamic
Radio With
RNC
Associated
View->Configuration
Bearer
Controll
PLMN
Configuration
Management->RNC
Information->NRT
PS
NE->RNC
Radio
Traffic
Uplink
Rate
RNC
XXX->Modify
Resource
Upper
LimitParameterWhen
Advanced
Management->Logical
High
Rate
C
Traffic+
>Dynamic
Radio
RNC
Associated
With
View->Configuration
PS
Traffic
Bearer
Controll
PLMN
Configuration
Management->RNC
Information->NRT
PS
NE->RNC
RadioRate
Traffic
Downlink
RNC
XXX->Modify
Resource
Upper
LimitParameterWhen
Advanced
Management->Logical
High Rate C
Traffic+
>Dynamic
Radio
RNC
Associated With
View->Configuration
PS
Traffic
Bearer
Controll
PLMN
Configuration
Management->RNC
Information->NRT
PS
NE->RNC
Radio
Traffic
Uplink
Rate
RNC
XXX->Modify
Resource
Upper
LimitParameterWhen Low
Advanced
Management->Logical
Rate C Traffic+
PS
>Dynamic
Radio
RNC
Associated With
Traffic
Bearer
Controll
View->Configuration
PLMN Configuration
Information->NRT
PS
Management->RNC
Traffic
Downlink
Rate
NE->RNC
Radio
RNC XXX->Modify
Upper
LimitParameterWhen Low
Resource
Advanced
Rate C Traffic+
Management->Logical
>Dynamic
RadioPS
Traffic
RNC
Associated
Bearer
Controll With
PLMN
Configuration
Information->Downlink
Maximum Rate
RNC
XXX->Modify
Threshold
of I/B
Advanced
Service onParameter>Dynamic
Radio
CELL_FACH
Bearer Controll
Information->Uplink
Maximum Rate
Threshold of I/B
Service on RACH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
PLMN Configuration
View->Configuration
Management->RNC
RNC XXX->Modify
NE->RNC
Radio
>Dynamic Radio
Management->Logical
Bearer
Controll
View->Configuration
RNC
Associated With
Information->HS/DManagement->RNC
PLMN
>D/D orConfiguration
HS/E->D/D
NE->RNC
Radio
Based on Quality
Resource
RNC
XXX->DRBC
Measurement
Switch
Management->Logical
Controlling
View->Configuration
for
S
Traffic
RNC Associated With
Configuration
Management->RNC
PLMN Configuration
Information->Switch
of
NE->RNC
Radio
supporting
SRB on EResource
RNC XXX->Modify
DCH
Management->Logical
Associated
>Dynamic
Radio With
PLMN
Configuration
Bearer Controll
View->Configuration
RNC
XXX->Modify
Counter
Threshold for
Management->RNC
Advanced
Cell_Dch toParameterNE->RNC
>Dynamic
Radio
Cell_FACHRadio
Resource
Bearer Controll
Management->Modify
Information->Switch for
Advanced
ParameterUL DCH Rate
View->Configuration
>RNC
Radio
Resource
Adjustment Based
on
Management->RNC
Management->Wait
UE Transmission
NE->RNC
Radio
Timer
Powerfor Adjusting
Resource
Uplink and Downlink
Management->Modify
Reconfiguration by
Advanced
ParameterOne
Step Upward
View->Configuration
>RNC
Radio
Resource
Management->RNC
Management->Switch
NE->RNC
Radio
of
Non Emergency CS
Resource
Service
Access to
Management->Modify
CELL_FACH
On RRC
Advanced
>RNC
Radio Resource
Management->RNC
ManagementNE->RNC
Radio
>Maximum
Resource Bit Rate of
HSDPA
Across Iur
Interface
>External
UTRAN CellManagement->RNC
>External
NE->RNC UTRAN
Radio Cell
XXX->Switch
of CS
Resource
64kbps
Establishment
Managementfor
External
UTRAN
>External
UTRAN
Cell
>External
UTRAN
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>Maximum
Bit Rate on
ManagementDL
DCH
for
NRT PS
>External UTRAN
CellRAB
in
External
UTRAN
Cell
XXX->Modify
View->Configuration
Advanced
>Maximum
Bit Rate on
NE->RNC Radio
E-DCH
for
NRT
PS
Resource
RAB
in
External
ManagementUTRAN
Cell
>External
UTRAN Cell>External UTRAN Cell
XXX->Modify
Advanced Parameter->
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Modify
NE->RNC Radio
>Maximum
Bit Rate on
ManagementDL
DCH
for
RT PSCell>External
UTRAN
View->Configuration
RAB
in
External
>External
UTRAN Cell
Management->RNC
UTRAN
Cell
XXX->Modify
NE->RNC Radio
>Maximum
Bit Rate on
ManagementE-DCH
for
RT
PS RAB
>External UTRAN
Cellin
External
UTRAN
>External
UTRAN
Cell
View->Configuration
Cell
XXX->Modify
Management->RNC
Radio
>Maximum
Resource Bit Rate on
UL
DCH for RT PS
Management->Modify
RAB
in External
View->Configuration
Advanced
ParameterUTRAN
Cell
Management->RNC
>Global Access
NE->RNC
Radio
>Switch of AMR Traffic
Management->Modify
Re-admission after
Advanced
AMR Rate ParameterDecrease
>RNC Radio Resource
>Downlink
Management->RNC
Conversational
NE->RNC RadioService
Maximum MAC-d PDU
Resource
Size
Extended
Management->MBMS
View->Configuration
Configuration->B
Management->RNC
Traffic on PTP or PTM
NE->RNC
Radio
Switch
Resource
Management->Modify
Advanced
>MBMS ConfigurationManagement->RNC
>Counting
Scope for
NE->RNC Radio
Cell_FACH
Resource
Management->Modify
View->Configuration
>MBMS ConfigurationNE->RNC
>Counting Radio
Scope for
Resource
Cell_PCH
Management->Modify
Advanced Parameter>MBMS
>UE
Number
Management->RNC
Threshold
for PTP and
NE->RNC Radio
PTM Switch
Resource
Management->MBMS
View->Configuration
Configuration->S
Management->RNC
Traffic on PTP or PTM
NE->RNC
Radio
Switch
Resource
Management->Modify
Advanced Parameter>MBMS Configuration>Counting Scope for
URA_PCH
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Management->Qos
Management->RNC
Relevance
NE->RNC
Radio
Configuration->Qos
Resource
Configuration->Qos
Management->Qos
Configuration XXX
Relevance
Configuration->Qos
View->Configuration
Configuration->Qos
Management->RNC
Configuration XXXNE->RNC
>Downlink Radio
Rate
Resource
Adjustment Level
View->Configuration
Management->Qos
Number
Management->RNC
Relevance
NE->RNC
Radio
Configuration->Qos
Resource
Configuration->Qos
Management->Qos
Configuration XXX
Relevance
Configuration->Qos
View->Configuration
Configuration->Qos
Management->RNC
Configuration XXXNE->RNC
Radio
>Uplink Rate
Resource
Adjustment Level
Management->RNC
Number
View->Configuration
Configuration->Type of
Management->RNC
Transport Channel for
NE->RNC
Initial RRCRadio
Connection
View->Configuration
Resource
Setup
Management->RNC
Management->Modify
NE->RNC
Radio
>Service Basic
Management->Modify
Configuration
Advanced
ParameterInformation->P-T-M
RB
>UE
Timers
and
Release Permission
Constants InformationView->Configuration
>Waiting Time of UE
Management->RNC
Sending message
NE->RNC
Radio
SIGNALING
Resource
CONNECTION
Management->Modify
RELEASE
View->Configuration
Advanced
ParameterINDICATION(with
Management->RNC
>UE
Timers
and
Cause)(T323)
NE->RNC
Constants Radio
InformationResource
>Switch of T323
Management->Modify
Broadcasting
Traffic
View->Configuration
Measurement
Management->RNC
Configuration->Time
NE->RNC Radio
Interval
for Taking an
Resource
Average
or a Variance
Management->Modify
View->Configuration
Advanced
>UE
TrafficRadio
NE->RNC
Measurement
Resource
Configuration
Management->Modify
Advanced Parameter>UE Traffic
Measurement
Number of UE Traffic
Volume Measurement
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC
Radio
>Transport
Channel
Management->Modify
Type
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC
Radio
>Measurement
Management->Modify
Quantity
Traffic
View->Configuration
Measurement
Management->RNC
>Measurement
Report
Resource
Transfer
Mode
Management->Modify
View->Configuration
>UE Traffic
NE->RNC
Radio
Measurement
Resource
Configuration
Management->Modify
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC Radio
Resource
of Reporting
Management->Modify
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC Radio
>Reporting Interval
Management->Modify
View->Configuration
Advanced
>UE
Traffic
NE->RNC Radio
Measurement
Resource
Management->Modify
Criteria
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC
Radio
>Average of RLC
Management->Modify
Buffer Payload for
View->Configuration
Advanced
Each RB ParameterManagement->RNC
>UE Traffic
NE->RNC
Radio
Measurement
Resource
Configuration->RLC
Management->Modify
Buffer Payload for
Advanced
Each RB Parameter>UE Traffic
View->Configuration
Measurement
Management->RNC
Radio
>Variance of
RLC
Resource
Buffer Payload for
Management->Modify
Each RB
Measurement
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE
Traffic
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
View->Configuration
Management->Modify
Management->RNC
>UE TrafficRadio
Resource
Measurement
Management->Modify
Configuration
Measurement
Configuration->UE
Traffic Volume
Measurement
Configuration Index
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Traffic
View->Configuration
Measurement
Management->RNC
>Function
Resource of
Configuration
View->Configuration
ManagementParameters
Management->RNC
>UltranCellNE->RNC
Radio
Resource
Setup ParametersManagement>Switch of CS 64kbps
>UltranCellEstablishment
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Maximum Allowable
ManagementRate on DCH to be
>UltranCellIncreased to When UE
View->Configuration
>UltranCellXXXis in Macro Diversity
Management->RNC
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementDL DCH for NRT PS
RAB
in Serving Cell
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementE-DCH for NRT PS
RAB
in Serving Cell
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementUL DCH for NRT PS
RAB
in Serving Cell
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementDL DCH for RT PS
RAB
in Serving Cell
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementE-DCH for RT PS RAB
in
Serving Cell
>Modify
Advanced
NE->RNC
Radio
>Maximum
Bit Rate on
ManagementUL DCH for RT PS
>UltranCellRAB
in Serving Cell
View->Configuration
>Modify Advanced
NE->RNC
Radio
>E-FACH DRX
Management->Modify
Support Indication in
Advanced
ParameterCell
>RNC Radio Resource
Management>Inactivity Time of
E_FACH
Transmission(T321)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Cycle
NE->RNC Radio
Length
of Discontinue
Resource
Receiving of E-FACH
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->Length
NE->RNC Radio
of
Receiving Frames in
Resource
E-FACH DRX
View->Configuration
Management->Modify
Management->RNC
Advanced
NE->RNC
Radio
>RNC Radio
Resource
Management->RNC
Resource
ManagementNE->RNC
Radio
Management>Indication of UE with
Resource
>UltranCellEnhanced DRX
Management->Logical
>UltranCellXXXRNC Associated With
>Modify
Advanced
PLMN Configuration
Parameter->utranCellInformation->Logical
>Switch
of RRC
RNC XXX->Modify
Redirection
Triggered
View->Configuration
Advanced Parameterby
Radio
Resource
Management->RNC
>Dynamic Radio
Congestion
NE->RNC
Radio
Bearer Controll
Resource
InformationManagement->Logical
>Increment Times of
View->Configuration
RNC
EventAssociated
4B0 for UEWith
Management->RNC
PLMN
Which Configuration
is Not Sensitive
NE->RNC
Information
XXXfor Battery Radio
Resource
>Logical
RNC
Consumption
Management->Logical
Associated
Transferred With
to PLMN
RNC
Associated
Configuration
URA_PCH
or IdleWith
PLMN
Information->DRBC
State Configuration
Strategy For Channel
RNC
XXX->Modify
Resource
utilization
View->Configuration
>Dynamic
Radio
NE->RNC Radio
Bearer
Controll
Resource
Information->Switch
of
View->Configuration
Management->Modify
6.8kbps
Signaling
Management->RNC
Advanced ParameterUsingInternal
on DCH
NE->RNC
Radio
>UE
Resource
Measurement
>Modify
Advanced
NE->RNC
Radio
Parameter->UE
Traffic
Resource
Volume
Measurement
Information
In A Cell
>Modify
Advanced
NE->RNC
Radio
Parameter->UE
Traffic
Resource
Volume
Measurement
In A Cell
Parameter->utranCell>Cell Downlink Load
Threshold for AMR
Data Rate Decision
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellN/A
NE->RNC
Radio
>Modify Advanced
Management->Logical
Parameter->utranCellRNC
>Cell Associated
Uplink LoadWith
View->Configuration
PLMN
Configuration
Threshold
for AMR
Management->RNC
N/A
Information
XXXData Rate Decision
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->RNC
Management->Logical
RNC
Associated With
to PLMN->NarrowPLMN
Configuration
Band
AMR
Initial Data
N/A
Information
XXXRate for High
Cell
View->Configuration
>Modify
Advanced
Load
Management->RNC
Parameter->RNC
NE->RNC Radio
Configuration
Related
Resource
to PLMN->Wide-Band
View->Configuration
Management->Modify
N/A
AMR
InitialParameterData Rate
Management->RNC
Advanced
for
High
Cell
Load
NE->RNC
Radio
>RNC Radio
Resource
Resource
Management->The
Management->Modify
Target of UE Version
Advanced
Parameterfor Heart Beat
N/A
>RNC Radio Resource
Management->The
View->Configuration
Switch Indicates
Management->RNC
whether
Only
Judge
NE->RNC
Radio
the
Downlink
Traffic
on
Resource
Heart
Beat
for
Channel
N/A
Management->Modify
Switching
to
PCH/IDLE
Advanced
>RNC Radio Resource
Cell will be
Management->RNC
reconfigured, but it Management->Heart
NE->RNC Radio
Beat
Period
View->Configuration
will not affect the
Resource
Management->RNC
run of equipment, it ManagementRadio
also will not affect NE->RNC
>UltranCellResource
the using and state >UltranCellXXX->Cell
Managementof users.
Setup Parameters>UltranCell>BCH Power
View->Configuration
>UltranCellXXXN/A
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
ManagementInformation In A Cell>UltranCell>Cell Limiting HSDPA
View->Configuration
N/A
>UltranCellXXXGBR
Resource
Management->RNC
>Modify
Advanced
Consumption
Index
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
Information
In A Cell>UltranCellManagement->RNC
>HSPA
Total
Downlink
N/A
Radio
Power
>Modify
Advanced
Resource
Parameter->HSPA
In A Cell>UltranCellXXX>Maximum
HSPA
N/A
>Modify AdvancedTotal
Downlink
Power
Parameter->
HS-PDSCH
Measurement Power
Offset Configuration>HS-PDSCH
Measurement Power
Offset
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
Management->RNC
Parameter->
NE->RNC
HS-PDSCHRadio
Resource
Measurement Power
ManagementOffset Configuration>UltranCell>Actual Configuration
View->Configuration
>UltranCellXXXof
HSDPA Evolution
Management->RNC
>Modify
Advanced
Function
ofRadio
UE in the
NE->RNC
Parameter->
Cell
Resource
HS-PDSCH
View->Configuration
>UltranCell- Power
Offset
>UltranCellXXX>Cell
ID
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->HSPA
>UltranCellInformation In A CellView->Configuration
>UltranCellXXX>Minimum HSPA Total
Management->RNC
>Modify
DownlinkAdvanced
Power
NE->RNC
Radio
Parameter->HSPA
Resource
Configuration
Management->Modify
Information In A CellAdvanced
Parameter-E>Target Non-serving
>Power
Control
DCH
to
Total
E-DCH
View->Configuration
Related
to
Service
Power
Ratio
Management->RNCand
Diversity ModeNE->RNC
Radio
>Diversity
Resource Mode and
Traffic
Related Power
Management->Modify
Control
Parameters
Advanced
ParameterIndex
View->Configuration
>Power Control
Management->RNC
Related to Service and
NE->RNC
Radio
Diversity ModeResource
>DPCCH Pilot Field
Management->Modify
Eb/N0
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->DPCH
Resource
PO1
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->DPCH
Resource
PO2
Management->Modify
View->Configuration
>Power Control
NE->RNC
Related to Radio
Service and
Resource
Diversity Mode->DPCH
Management->Modify
PO3
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->EResource
AGCH
Power Offset
Management->Modify
for
TTI
10ms
Advanced
Parameter>Power Control
Diversity Mode->EAGCH Power Offset
for TTI 2ms
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->EResource
HICH
Power Offset for
Management->Modify
TTI 10ms in
Single
Advanced
Link
Condition
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->EResource
HICH
Power Offset for
Management->Modify
TTI 2ms inParameterSingle Link
Advanced
View->Configuration
Condition
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
Mode->EResource
RGCH
Power Offset
Management->Modify
for TTI 10ms
in Single
Advanced
ParameterLink
Condition
>Power
Control
View->Configuration
Related
to Service and
Management->RNC
Diversity
NE->RNCMode->ERadio
RGCH
Power Offset
Resource
Management->Modify
View->Configuration
Link
Condition
Advanced
>Power
Control
NE->RNC Radio
Related
to Service and
Resource
Diversity
Mode->DPCH
Management->Modify
Maximum DL
Power
Advanced
Parameter>Power
Control
View->Configuration
Related
to Service and
Management->RNC
Diversity
NE->RNCModeRadio
>Maximum
Resource Allowed
Uplink DPCH
Management->Modify
View->Configuration
Transmission
Power
Advanced
>Power
Control
NE->RNC
Radio
Related
to Service and
Resource
Diversity
Mode->DPCH
Management->Modify
Minimum DL
Power
Advanced
>Power Control
Management->RNC
NE->RNC
Radio
>SCCPCH Power for
Management->Modify
Cell in Half-island
Advanced
ParameterStatus
View->Configuration
>Power
Control
Management->RNC
Related
to Radio
Service and
NE->RNC
Diversity
ModeResource
>SCCPCH
Power for
Management->Modify
Single
Cell
Reception
>Power Control
Management->RNC
NE->RNC
Radio
>Transmit Diversity
Management->Modify
Mode
Advanced Parameter>Power Control
Diversity Mode->Uplink
Initial SIR Target
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related to Radio
Service and
NE->RNC
Diversity
ResourceMode>Maximum
Uplink SIR
Management->Modify
Target
>Power Control
Management->RNC
NE->RNC
Radio
Diversity
ModeView->Configuration
Resource
>Minimum Uplink SIR
Management->RNC
Management->Modify
Target
NE->RNC
Radio
Advanced
Resource Parameter>Limiting
HSDPA GBR
Management->Modify
Resource
Advanced ParameterConsumption
>Limiting HSDPA GBR
Information
Resource
View->Configuration
Consumption
Management->RNC
InformationNE->RNC Radio
>Guaranteed
Bit Rate
Resource
Level
Number
of
Management->Modify
HSDPA Services
for
Advanced
ParameterLimiting
HSDPA
GBR
>Limiting
HSDPA
GBR
View->Configuration
Resource
Resource
Management->RNC
Consumption
Consumption
NE->RNC Radio
Information->Limiting
Resource
HSDPA GBR Resource
Management->Modify
Consumption
Index
Advanced
>Limiting
HSDPA GBR
Management->RNC
Resource
NE->RNC Radio
Consumption
Resource
Information
Management->Modify
Advanced
>Global
Access
Management->RNC
Control
InformationNE->RNC
Radio
>Forced
ResourceQueue Switch
for AMR Service
Management->Modify
View->Configuration
Advanced
>Global
Access
NE->RNC Radio
Control
InformationResource
>Forced
Queue Switch
Management->Modify
for CS 64kbps
service
Advanced
>Global
Access
Management->RNC
Control
InformationNE->RNC
Radio
>Maximum
Resource Time in the
True
Queue when
Management->Modify
Service beParameterForced into
Advanced
Queue
>Extended
HSPA
View->Configuration
Global
InformationManagement->RNC
>HS-DPCCH
ACK
NE->RNC Radio
Power
Offset
for
Single
Resource
Radio Link or IntraManagement->Modify
NodeB
Handover
Advanced
Parameter>Extended HSPA
Global Information>ACK-NACK
Repetition Factor
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
>ExtendedRadio
HSPA
Resource
Global InformationManagement->Modify
>CQI Feedback Cycle
Advanced Parameter>Extended HSPA
View->Configuration
Global InformationManagement->RNC
>HS-DPCCH CQI
NE->RNC
Radio
Power Offset
for Single
Resource
Radio Link or IntraManagement->Modify
NodeB Handover
View->Configuration
>Extended HSPA
NE->RNC
Radio
Global InformationResource
>CQI Repetition Factor
Management->Modify
View->Configuration
Advanced
>Extended
HSPA
NE->RNC Radio
Global
Information->EResource
DCH
Reference Power
Management->Modify
Offset
Advanced
>Extended
HSPA
Management->RNC
Global
>Quantified
Resource EDPCCH/DPCCH
Management->Modify
Power Offset
(10ms
Advanced
ParameterTTI)
>Extended
HSPA
View->Configuration
Global
>Quantified
ENE->RNC Radio
DPCCH/DPCCH
Resource
Power Offset (2ms
Management->Modify
TTI)
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management->HSPA
Resource
Total Downlink Power
Management->Modify
Allocation Method
Advanced
>HSPA
Configuration
Management->RNC
Information->Switch
for
NE->RNC Radio
Limiting
HSDPA
GBR
Resource
Resource
Management->Modify
Consumption
Advanced
>RNC
Radio
Resource
Management->RNC
Management->HSNE->RNC Radio
DPCCH
ResourceACK Power
Offset
for Inter-NodeB
Management->Modify
Handover
Advanced
>RNC
Radio
Resource
Management->RNC
Management->HSNE->RNC Radio
DPCCH
ResourceCQI Power
Offset
for Inter-NodeB
Management->Modify
Handover
Management->HSDPCCH NACK Power
Handover
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced ParameterN/A
View->Configuration
>Extended HSPA
Management->RNC
Global InformationNE->RNC
Radio
>HS-DPCCH
NACK
Resource
Power Offset for Single
Management->Modify
Radio Link or IntraN/A
Advanced
ParameterNodeB
Handover
View->Configuration
>Extended
HSPA
Management->RNC
Radio
>Power
Offset for
Resource
Scheduling
Info (10ms
Management->Modify
TTI)
N/A
>Extended HSPA
Management->RNC
Radio
>Power Offset
for
Resource
View->Configuration
Management->Modify
TTI)
N/A
Management->RNC
>ExtendedRadio
HSPA
Resource
Global InformationManagement>TPC Command Error
>UltranCellRate Target
N/A
View->Configuration
Parameter->Load
Management->RNC
Control InformationNE->RNC
Radio
>Report Periodicity
View->Configuration
Resource
Unit
over
the
Iupc
Management->RNC
N/A
ManagementInterface Radio
NE->RNC
>UltranCellResource
ManagementIdentity
>UltranCellXXXN/A
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control InformationManagement>Maximum FACH
>UltranCellPower Adjustment
View->Configuration
N/A
>UltranCellXXXSwitch
for MBMS
Management->RNC
>Modify
Advanced
Downlink
Load
Control
NE->RNC
Radio
Parameter->Load
Resource
Control
InformationManagement>Downlink
Overload
Recovering
Lower
N/A
Limit
>Modify
Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control
>UltranCell-Switch for
Shielding
Rate
View->Configuration
N/A
>UltranCellXXXReduction
Only when downlink Management->RNC
>Modify Advanced
overload happen,
NE->RNC
Radio
Parameter->Load
modify this
Resource
Control Informationparameter maybe Management>Maximum Number of
affect few online
>UltranCellDegraded Downlink
service, but usually >UltranCellXXXLoad Steps Every Time
modify this
>Modify Advanced
parameter has no Parameter->Load
affect to the
Control Informationservice.
>Downlink Switch for
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control
InformationManagementView->Configuration
>Downlink
Switch for
Shielding
Forced
Radio
Handover
>Modify
Advanced
Resource
Parameter->Load
ManagementControl
Information>UltranCell>Maximum
Number of
>UltranCellXXXDownlink
Forced
View->Configuration
>Modify AdvancedDrop
Users
Every Time
Management->RNC
Parameter->Load
NE->RNC
Radio
>Maximum Number of
ManagementDownlink Forced
>UltranCellHandover Users or
View->Configuration
>UltranCellXXXDeleted Radio Links
Management->RNC
>Modify
Advanced
Every Time
NE->RNC
Radio
Parameter->Load
Resource
Control
InformationManagement>Downlink Overload
View->Configuration
>UltranCellUpper
Limit
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->Load
ManagementControl InformationView->Configuration
>UltranCell>Downlink Serious
Management->RNC
>UltranCellXXXOverload Upper Limit
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Load
ManagementControl Information>UltranCell>The Switch of Forced
View->Configuration
>UltranCellXXXHandover for Online
Management->RNC
>Modify
Users in Advanced
Congestion
NE->RNC
Radio
Parameter->Load
Resource
Control
InformationManagement>The
Switch
>UltranCell- of Forced
RAB Release for
View->Configuration
>UltranCellXXXOnline
in
Management->RNC
>ModifyUsers
Advanced
Congestion
NE->RNC
Radio
Parameter->Load
Resource
Control InformationManagement>The Switch of Forced
>UltranCellRAB to FACH of the
View->Configuration
>UltranCellXXXonline I/B users in
Management->RNC
>Modify
Advanced
Congestion
NE->RNC
Radio
Parameter->Load
Resource
Control InformationManagement>Common Overload
View->Configuration
>UltranCellThreshold for HSManagement->RNC
>UltranCellXXXDSCH
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Load
ManagementControl Information>UltranCell>Recover Threshold
>UltranCellXXXfor HS-DSCH Overload
>Modify Advanced
Parameter->Load
Control Information>Maximum Number of
UE Decreasing Rate
When Congestion
View->Configuration
Management->RNC
NE->RNC Radio
Resource
N/A
>Modify Advanced
Management->RNC
Parameter->Load
NE->RNC
Radio
>Maximum Users of
ManagementInteractive
View->Configuration
>UltranCellClass/Background
Management->RNC
N/A
>UltranCellXXXClass RAB->FACH
NE->RNC
Radio for
>Modify
OverloadAdvanced
Resource
Parameter->Load
ManagementControl
Information>UltranCell>Safe Threshold for
View->Configuration
>UltranCellXXXN/A
NodeB
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control InformationManagement>Switch of Interactive
>UltranCellClass/Background
View->Configuration
N/A
>UltranCellXXXClass
RAB->FACH for
Management->RNC
>Modify
Advanced
Overload
NE->RNC
Radio
Parameter->Load
Resource
Control
InformationManagement>Uplink
Overload
Recovering
Lower
N/A
Limit
>Modify
Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control
Switch for
>UltranCellShielding
Rate
View->Configuration
N/A
>UltranCellXXXReduction
Only when uplink
Management->RNC
>Modify Advanced
overload happen,
NE->RNC
Radio
Parameter->Load
modify this
Resource
Control Informationparameter maybe Management>Maximum Number of
View->Configuration
affect few online
>UltranCellDegraded Uplink Load
service, but usually Management->RNC
>UltranCellXXXSteps Every Time
NE->RNC
Radio
modify this
>Modify Advanced
parameter has no Resource
Parameter->Load
Managementaffect to the
Control Information>UltranCellservice.
>Uplink Switch for
View->Configuration
N/A
>UltranCellXXXShielding
Forced Drop
Management->RNC
>Modify
Advanced
NE->RNC Radio
Parameter->Load
Resource
Control
Switch for
View->Configuration
>UltranCellShielding
Forced
Management->RNC
N/A
>UltranCellXXXHandover
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Load
ManagementControl Information>UltranCell>Maximum Number of
>UltranCellXXXUplink Forced Drop
View->Configuration
N/A
>Modify
Advanced
Users Every
Time
Management->RNC
Parameter->Load
NE->RNC Radio
Control
InformationResource
>Maximum
Number of
ManagementUplink Forced
>UltranCellN/A
Handover
Users Every
>UltranCellXXXTime
>Modify Advanced
Parameter->Load
Control Information>Uplink Overload
Upper Limit
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
The related
common transport
channel (MICH
channel) will be
reconfigured.
N/A
The related
common transport
channel will be
reconfigured.
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
Resource
Parameter->Load
ManagementControl
Information>UltranCellView->Configuration
>Uplink Serious
Overload
Upper Limit
>Modify
Advanced
NE->RNC
Radio
Parameter->Load
Resource
Control
>UltranCell-High Load
>UltranCellXXXAMR
Services
BLER
>Modify
Advanced
View->Configuration
Target
Adjustment
Parameter->Load
Management->RNC
Control
InformationNE->RNC
Radio
>Uplink
High Load
Resource
Management->Modify
AMR
Services
BLER
Advanced
Target
Adjustment
>MBMS
>Downlink
Switch for
NE->RNC Radio
Dropping
MBMS
Resource
Services
Management->Modify
Advanced
>MBMS
>SCCPCH
Power
NE->RNC Radio
Offset
for
Selective
Resource
Combining
Management->Modify
>SCCPCH Power
NE->RNC
Radio
Offset for Soft
Resource
Combining
Management->Modify
Advanced
>Threshold
for Cell in
NE->RNC Radio
Half-island
Status
Resource
Management->Modify
View->Configuration
>MBMS ConfigurationNE->RNC
>ThresholdRadio
for Cell in
Resource
Island Status
Radio
>Modify Advanced
Resource
Parameter->MICHManagement->NodeB
>MICH Power
Configuration
Information->NODEB
View->Configuration
XXX->Modify
Management->RNC
Advanced
>Adjustment
Type for
Resource
DL
Power
Balance
Setup Parameters>AICH Power
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>UltranCellN/A
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Shield Period for
ManagementIncreasing SIR Target
N/A
>UltranCellin Threshold Algorithm
>Modify Advanced
Management->RNC
The related
>DPCH
PC Preamble
Resource
common transport Length
View->Configuration
>UltranCellreconfigured.
Management->RNC
NE->RNC
Radio
>PICH Power
View->Configuration
N/A
>Modify
Advanced
ManagementParameter->utranCell>UltranCellView->Configuration
>SRB Delay
N/A
>Modify
Advanced
NE->RNC
Radio
>Power
Offset for
ManagementDownlink
DPCH Initial
>UltranCellPower Calculation
View->Configuration
>UltranCellXXXN/A
when
RAB
Hard
Management->RNC
>Modify
Advanced
Handover
NE->RNC
Radio
>Power Offset for
ManagementDownlink DPCH Initial
View->Configuration
Management->RNC
N/A
>UltranCellXXXwhen RAB ReNE->RNC
Radio
>Modify
Advanced
Establishment.
Resource
Parameter->utranCellManagement>Power Offset for
>UltranCellDownlink DPCH Initial
View->Configuration
>UltranCellXXXPower Calculation
Management->RNC
N/A
>Modify
Advanced
when Call
Setup
NE->RNC
Radio
>Power
Offset for
ManagementDownlink
DPCH Initial
>UltranCellXXXN/A
when
Soft
or Softer
>Modify
Advanced
Handover
View->Configuration
Parameter->utranCellManagement->RNC
>Power Offset for
NE->RNC
Radio Initial
Downlink DPCH
The related
Resource
common transport Power Calculation
Managementwhen SRB Hard
channel will be
>UltranCellHandover
View->Configuration
reconfigured.
Cell will be
Management->RNC
Parametersreconfigured, but it Setup
NE->RNC
Radio
>PCH
Power
will not affect the
Resource
run of equipment, it Managementalso will not affect >UltranCellthe using and state >UltranCellXXX->Cell
of users.
Setup Parameters->PCPICH Power
View->Configuration
Management->RNC
NE->RNC Radio
Resource
ManagementN/A
>Modify Advanced
NE->RNC
Radio
>PRACH
Initiation Tx
ManagementPower
N/A
>Modify Advanced
Cell will be
Management->RNC
reconfigured, but it Parameter->PrachNE->RNC Radio
>Maximum
will not affect the
Resource Allowed UL
Power of RACH
run of equipment, it TX
Managementalso will not affect >UltranCellView->Configuration
the using and state Management->RNC
of users.
Setup
ParametersNE->RNC
Radio
>Primary
ResourceSCH Power
N/A
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC Radio
Configuration
XXX
Resource
N/A
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC Radio
Configuration
XXX
Resource
N/A
Management->Qos
Relevance
View->Configuration
Configuration->Qos
Management->RNC
Configuration->Qos
NE->RNC Radio
Configuration
XXX
View->Configuration
Resource
Management->RNC
N/A
Management->Qos
NE->RNC
RelevanceRadio
Resource
Configuration->Qos
Management->Logical
Configuration->Qos
RNC
Associated
With
Configuration
XXX
PLMN Configuration
N/A
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->RNC
Resource
Configuration
Management->Modify
Supplement
N/A
Advanced
ParameterInformation->Dynamic
View->Configuration
>RNC
Resource
UpdateRadio
PO2 Switch
Management->RNC
Management->R99 CS
NE->RNC
Radio
AMR Services
BLER
The related
Resource
Target Adjustment
common transport ManagementSwitch
View->Configuration
channel will be
reconfigured.
NE->RNC
Radio
Setup ParametersThe Related
Resource
>Maximum FACH
common transport ManagementPower
channel will be
>UltranCelldeleted and setup >UltranCellXXXagain .
>Modify Advanced
Parameter->SCCPCH>S-CCPCH TFCI Field
Power Offset
The Related
common transport
channel will be
deleted and setup
againwill
. be
Cell
reconfigured, but it
will not affect the
run of equipment, it
also will not affect
the using
Cell
will beand state
of
users.
reconfigured,
but it
will not affect the
run of equipment, it
also will not affect
the using and state
of users.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
Parameter->SCCPCHResource
>S-CCPCH Pilot Field
ManagementPower Offset
>Modify
Advanced
NE->RNC
Radio
>S-CPICH Power
View->Configuration
Setup
>Secondary
SCH
NE->RNC Radio
Power
Resource
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
Advanced
>Traffic-Related
Power
Resource
Control
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control->R99
CS
NE->RNC Radio AMR
Services
ResourceTolerance
BLER
Period in High
Management->Modify
Load Status
for BLER
Advanced
ParameterTarget
Adjustment
>Traffic-Related
Power
Control->R99
CS
AMR
View->Configuration
Services
BLER
Target
Management->RNC
in
High Load
Status for
NE->RNC
Radio
View->Configuration
BLER Target
Resource
Management->RNC
Adjustment
Management->Modify
NE->RNC Radio
Advanced
Resource Parameter>Traffic-Related
Power
Management->Modify
Control
Control->R99 CS AMR
Services
Error
View->Configuration
Transport
Block
Management->RNC
Number
Threshold
NE->RNC Radio in
Resource
BLER
Target
Management->Modify
Adjustment
Advanced
>Traffic-Related
Power
Management->RNC
Control
NE->RNC Radio
Resource
Management->Modify
Control
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
Advanced
>Traffic-Related
NE->RNC Radio Power
Control
Resource
View->Configuration
>UltranCellNE->RNC
Radio
Resource
Setup ParametersManagement>Switch of Frequency
>UltranCellIntelligently Function
>UltranCellXXX>Modify
Advanced
View->Configuration
>Diversity
NE->RNC Mode
Radio and
Traffic
Related
Power
Resource
View->Configuration
Control
Parameters
Index
>Modify
Advanced
ManagementParameter->utranCell
View->Configuration
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>Forbidden Time of
>UltranCellSwitching Off After
>UltranCellXXXSwitching On the
View->Configuration
>Modify
Advanced
Frequency
Management->RNC
>Trigger
ResourceTime of
Judgment
Based on
ManagementUE Number During
>UltranCellSwitching
Off
Frequency
Intelligently
>Modify
Advanced
Management->RNC
>Switch
Resourceof Algorithm
Used to Switch On the
ManagementFrequency
>UltranCell-Intelligently
View->Configuration
>Modify Advanced
NE->RNC
Radio
>SIB7 Originator
Radio
>Modify Advanced
Resource
View->Configuration
>UltranCellNE->RNC
Radio
>Modify Advanced
ManagementParameter->utranCell>UltranCell>Traffic PC Index
Parameter->utranCell>UE Number
Threshold Used for
Switching Off
N/A
Physical shared
channel
reconfiguration will
be triggered, and
SIB5/5bis will
change.
SIB5/5bis will
change
SIB5/5bis will
change
SIB5/5bis will
change
Physical shared
channel
be triggered
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
SIB5/5bis will
change
SIB5/5bis will
change
SIB5/5bis will
change
SIB5/5bis will
change
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Parameter->HSPA
Management->RNC
Configuration
NE->RNC
InformationRadio
In A CellResource
>Maximum Number of
View->Configuration
ManagementUsers with Traffic on
Management->RNC
>UltranCellCommon E-DCH in
NE->RNC
EnhancecdRadio
Uplink
Resource
Setup
ParametersCELL_FACH
State
Management>Uplink
Enhanced
View->Configuration
>UltranCellCELL_FACH Support
Management->RNC
>UltranCellXXXIndicator Radio
NE->RNC
>Modify
Advanced
Resource
Parameter->EFACH
ManagementConfiguration->UL
>UltranCellInterference
for
>UltranCellXXXCommonAdvanced
E-DCH
View->Configuration
>Modify
Configured
in
Management->RNC
Parameter->EFACH
SIB5/5bis
Indicator
NE->RNC
Radio
Configuration->Power
Resource
Offset between the
ManagementLast Preamble and the
>UltranCellInitial Power of the
View->Configuration
>UltranCellXXXDPCCH in Enhanced
Management->RNC
>Modify
Advanced
Uplink CELL_FACH
NE->RNC
Radio
Parameter->EFACH
State
Resource
ConfigurationManagement>Additional E-DCH
View->Configuration
>UltranCellTransmission Back Off
Management->RNC
>UltranCellXXXfor Common
E-DCH
NE->RNC
Radio
>Modify
Advanced
Resource
Parameter->EFACH
ManagementConfiguration>UltranCell>Common E-DCH
Resources
Number
>Modify
Advanced
Management->RNC
Parameter->EFACH
NE->RNC Radio
>Maximum
Common
E-DCH Resource
Allocation
Time for
Radio
CCCH
>Modify
Advanced
Resource
Parameter->EFACH
ManagementConfiguration->E-DCH
Transmission
Continuation
Back Off
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
ConfigurationManagement>Maximum
>UltranCell-Period for
View->Configuration
Collision Resolution
Phase
for
Common E>Modify
Advanced
NE->RNC
Radio
DCH
Parameter->EFACH
Resource
Configuration->Uplink
ManagementInner
Loop Power
>UltranCellControl Algorithm in
>UltranCellXXXUplink
>ModifyEnhanced
Advanced
CELL_FACH
State
Parameter->EFACH
Configuration->Step
Size of Uplink Inner
Loop Power Control in
Uplink Enhanced
CELL_FACH State
SIB5/5bis will
change
N/A
Physical shared
channel
be triggered
N/A
Physical shared
channel
be triggered
Physical shared
channel
be triggered, and
SIB5/5bis will
change.
Physical shared
channel
be triggered.
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>RNC Radio Resource
Management->RNC
Management->Happy
NE->RNC
Radio
Bit Delay for
Common
View->Configuration
Resource
E-DCH
Management->RNC
Management->Modify
NE->RNC
Radio
>Extended HSPA
ManagementGlobal Information>UltranCell>HSPA Type
>Modify
Advanced
Management->RNC
Parameter->EFACH
NE->RNC Radio
Configuration->HSResource
PDSCH
Measurement
ManagementPower Offset (UL
Enhanced
CELL_FACH)
>Modify
Advanced
NE->RNC
Radio
Parameter->EFACH
Resource
Management>Maximum Bit Rate for
Management->RNC
>UltranCellCommon
E-DCH
NE->RNC
Radio User
>Modify Advanced
ManagementParameter->EFACH
>UltranCellConfiguration->SIR
>UltranCellXXXTarget for Common EView->Configuration
>Modify
Advanced
DCH
Management->RNC
Parameter->EFACH
NE->RNC Radio
>ACK/NACK/CQI
ManagementSupport
on HS>UltranCellDPCCH
Indicator in UL
View->Configuration
>UltranCellXXXEnhanced
Management->RNC
>Modify Advanced
CELL_FACH
State
NE->RNC
Radio
Parameter->EFACH
Resource
Configuration->Initial
Management->Modify
F-DPCH Power in
Advanced
ParameterUplink Enhanced
>NodeB
Dedicated
CELL_FACH State
View->Configuration
Measurement
Management->RNC
Radio
>Measurement
Resource
Threshold 1 of Event
Management->Modify
E/F for SIR Error
Advanced
>NodeB
Dedicated
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
View->Configuration
>NodeB Dedicated
NE->RNC
Radio
Measurement
Resource
Configuration
XXX->E-DPCCH
Power Boosting
Support Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Model ParametersNE->RNC
>Cell LoadRadio
Scene
View->Configuration
Resource
Management->RNC
Management->Modify
NE->RNC Radio
Advanced
Resource Parameter>HSPA
Configuration
Management->Modify
Information
>HSPA
Configuration
Management->RNC
Information->Power
NE->RNC Radio
Offset
Relative to EResource
HICH
in
Single Link
Management->Modify
Condition
E-HICH
Advanced for
of Serving
RLS in
>HSPA
Configuration
Management->RNC
Macro
Diversity
Information->Power
NE->RNC
Radio TTI)
Condition
(10ms
Offset
Relative
to EResource
HICH
in
Single
Link
Management->Modify
Condition
E-HICH
Advanced for
of Non-serving
RLS in
>HSPA
Configuration
Management->RNC
Macro
Diversity
Information->Power
NE->RNC
RadioTTI)
Condition
(2ms
Offset
Relative
to EResource
HICH
in
Single
Link
Management->Modify
Condition
E-HICH
Advanced for
of Non-serving
RLS in
>HSPA
Configuration
Management->RNC
Macro
Diversity
Information->Power
NE->RNC
Radio TTI)
Condition
(10ms
Offset
Relative
to EResource
RGCH
in
Single
Link
Management->Modify
Condition
for
E-RGCH
Advanced Parameterof Serving
RLS in
>HSPA
Configuration
Macro
Diversity
Information->Power
Condition
(2ms to
TTI)
Offset
Relative
EView->Configuration
RGCH
in
Single
Link
Management->RNC
Condition
E-RGCH
NE->RNC for
Radio
of Serving RLS in
Resource
Macro
Diversity
View->Configuration
Management->Modify
Condition
TTI)
Management->RNC
Advanced (10ms
ParameterNE->RNC
Radio
>HSPA Configuration
Resource
Information
>Modify
Advanced
Management->RNC
>HSUPA
ResourceAdaptive
Transmission
Switch
>Modify
Advanced
Resource
Parameter->utranCell>Default E-DCH User
Number Level
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
N/A
View->Configuration
>HSPA Configuration
NE->RNC
Radio
Information->Dynamic
Resource
Updating Switch of EManagementAGCH Power Offset
Cell will be deleted View->Configuration
>UltranCelland reestablished. Management->RNC
>Modify Advanced
Resource
Parameter->utranCellManagement>DL
TPC Pattern 01
View->Configuration
>UltranCellCount
Management->RNC
N/A
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>P-CPICH Power
View->Configuration
>UltranCellDown Step Size Used
Management->RNC
>UltranCellXXXto Switch Off
N/A
NE->RNC
Radio
>Modify
Advanced
Frequency
Intelligently
Resource
Parameter->utranCellManagement>Times of Downgrade
>UltranCellof P-CPICH Power
>UltranCellXXXwith Equal Step Used
N/A
>Modify
to
SwitchAdvanced
Off
View->Configuration
Parameter->utranCellFrequency
Intelligently
Management->RNC
>Time Interval
NE->RNC
Radio
between
Resourcetwo
Downgrade
of PManagement->Modify
CPICH
Power
Used to
N/A
Advanced ParameterSwitch
Off
Frequency
>Traffic-Related
Power
View->Configuration
Intelligently
Control->Uplink Outer
Management->RNC
Loop
PC SIR
Target
NE->RNC
Radio
Adaptive
Down
Step
Resource
Size
Switch
N/A
Management>External
Management->RNC
XXX->Cell
Altitude for
NE->RNC Radio
Cell
Center
Resource
N/A
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Altitude
NE->RNC Radio
Accurary
Resource
N/A
Management->RNC
XXX->Direction of
NE->RNC
Altitude forRadio
Cell Center
Resource
N/A
NE->RNC
RadioAltitude
XXX->Antenna
Resource
N/A
XXX->Direction of
Antenna Altitude
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
Management->RNC
XXX->Degree
of
NE->RNC Radio
Antenna
Latitude
Resource
Management>External
Management->RNC
XXX->Antenna
NE->RNC Radio
Latitude
ResourceSign
Management->RNC
XXX->Degrees of
NE->RNC
Radio
Antenna Longitude
Resource
NE->RNC
RadioType
XXX->Antenna
Resource
Management->RNC
XXX->Cell Description
NE->RNC
Radio
Type
Resource
NE->RNC
XXX->Cell Radio
Radius
Resource
Management->RNC
XXX->Geographical
NE->RNC
Radio
Area Report
Type
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Confidence
NE->RNC Radio
Resource
NE->RNC
XXX->InnerRadio
Angle
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Degree
of
NE->RNC Radio
Latitude
for
Cell
Center
Resource
XXX->Latitude Sign for
Cell Center
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
UTRAN Cell
View->Configuration
XXX->Degrees
of
Management->RNC
Longitude
for
Cell
NE->RNC Radio
Center
Resource
NE->RNC
Radio
XXX->Offset
Angle
Resource
Management->RNC
XXX->Polygon Point
NE->RNC
Number Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX
NE->RNC Radio
Resource
Management>External
>External
UTRAN Cell
Management->RNC
XXX
NE->RNC Radio
Resource
Management->RNC
XXX
View->Configuration
NE->RNC Radio
Management->RNC
Resource
NE->RNC
Radio
Management->RNC
Resource
Configuration->GPS
Management->Logical
Information Root
RNC Associated With
View->Configuration
PLMN Configuration
Management->RNC
Information XXX->RNC
NE->RNC
Radio
Configuration
Resource
Supplement
Management->Logical
Information->HSDPA
RNC
Associated With
HS-DPCCHACK/NACK
PLMN
Configuration
enhancement
Support
View->Configuration
Information
Indicator XXX->RNC
Management->RNC
Configuration
NE->RNC
Radio
Supplement
Resource
Information->Handover
View->Configuration
Management->Modify
Basedon IMS Support
Management->RNC
Advanced
Indicator ParameterNE->RNC
Radio
>RNC Radio
Resource
Resource
ManagementManagement->Logical
>Duration of Valid Cell
RNC
With
Load Associated
Info
PLMN Configuration
Configuration
Supplement
Information->InterSystem DTM Support
Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
View->Configuration
Resource
Management->RNC
Management->RNC
NE->RNC
Radio
Configuration->MBMS
Resource
Enhanced Broadcast
Management->Logical
Mode SupportIndicator
RNC Associated With
View->Configuration
PLMN Configuration
Management->RNC
NE->RNC
Radio
Configuration
Resource
Supplement
Management->Logical
Information->Four EView->Configuration
RNC
Associated
DPDCHs
AllowedWith
Management->RNC
PLMN
Configuration
Indicator
NE->RNC
InformationRadio
XXX->RNC
Resource
Configuration
Management->Logical
Supplement
RNC
Associated With
Information->LCS
PLMN
SupportConfiguration
Method
View->Configuration
Configuration
Management->RNC
Supplement
NE->RNC
Radio
Information->Loading
Resource
based InterSys HO
Management->RNC
Support Indicator
Configuration->MBMS
View->Configuration
over
Iur Support
Management->RNC
Indicator
NE->RNC Radio
Resource
View->Configuration
Management->RNC
Management->RNC
Configuration->MBMS
NE->RNC Radio
Multicast
ResourceMode
Support
Indicator
Management->Logical
View->Configuration
RNC
Associated
With
Management->RNC
PLMN
Configuration
NE->RNC Radio
Information
Resource XXX->RNC
Configuration
Management->Logical
Supplement
RNC Associated With
View->Configuration
Information->NACC
PLMN
Configuration
Management->RNC
Support
Indicator
Information
XXX->RNC
NE->RNC Radio
Configuration
Resource
Supplement
Management->Logical
InformationRNC Associated With
>Neighbouring
Cell
View->Configuration
PLMN
Configuration
Monitoring
Management->RNC
InformationSupport
XXX->RNC
Indicator
NE->RNC
Radio
Configuration
Resource
Supplement
Management->Logical
Information->PS
RNC
AssociatedRAB
With
Conversational
View->Configuration
PLMN
Configuration
for
VoIP
Support
Management->RNC
Information
XXX->RNC
Indicator
NE->RNC Radio
Configuration
Resource
Supplement
Management->Logical
Information->PS
RNC Associated InterWith
System
Handover
PLMN Configuration
Indicator
Configuration
Supplement
Information->PS
Signalling RAB for IMS
Support Indicator
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXX->RNC
NE->RNC Radio
Configuration
Resource
Supplement
Management->Logical
Information->MBMS
RNC
Associated With
View->Configuration
PTP
over
HSDPA
PLMN
Configuration
Management->RNC
Support
Indicator
Information
XXX->RNC
NE->RNC Radio
Configuration
Resource
Supplement
Management->Logical
Information->ServiceRNC Associated With
Based
Handover
PLMN Configuration
Support
Indicator
View->Configuration
Information
XXX->RNC
Management->RNC
Configuration
NE->RNC
Radio
Supplement
Resource
Information->WB-AMR
ManagementSpeech Support
>UltranCellIndicator
View->Configuration
Management->RNC
RadioRAT
>Prior Redirect
Resource
Indicator
>UltranCellXXX->LCS
Management->RNC
and
Cell Antenna->Cell
NE->RNC
Radio
Altitude
for Cell Center
Resource
>UltranCellXXX->LCS
NE->RNC
Radio
and Cell AntennaResource
>Altitude Accurary
>UltranCellXXX->LCS
Management->RNC
and Cell AntennaNE->RNC
>Direction Radio
of Altitude
Resource
for Cell Center
>UltranCellXXX->LCS
NE->RNC
Radio
>Antenna Altitude
>UltranCellXXX->LCS
Management->RNC
and
Cell AntennaNE->RNC
Radio
>Direction
Resource of Antenna
Altitude
>UltranCellXXX->LCS
Management->RNC
>Degree ofRadio
Antenna
Resource
Latitude
Management>UltranCell>UltranCellXXX->LCS
and Cell Antenna>AntennaLatitude Sign
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>UltranCellXXX->LCS
Management->RNC
Radio
>Degrees of
Antenna
Resource
Longitude
>UltranCellXXX->LCS
Management->RNC
and
Cell AntennaNE->RNC
Radio
>Antenna
Resource Type
>UltranCellXXX->LCS
Management->RNC
and
Cell Antenna->Cell
NE->RNC
Radio
Description
Resource Type
>UltranCellXXX->LCS
NE->RNC
Radio
and Cell Antenna->Cell
Resource
Radius
>UltranCellXXX->LCS
Management->RNC
>ClassifiedRadio
Zone
Resource
Indicator
>UltranCellXXX->LCS
NE->RNC
Radio
>Confidence
>UltranCellXXX->LCS
Management->RNC
Radio
>Geographical
Area
Resource
Report Type
>UltranCellXXX->LCS
NE->RNC
Radio
>Inner Angle
>UltranCellXXX->LCS
Management->RNC
and
Cell AntennaNE->RNC
Radio
>Degree
Resourceof Latitude for
Cell Center
>UltranCellXXX->LCS
Management->RNC
and
Cell AntennaNE->RNC
Radio
>Latitude
Resource Sign for Cell
Center
and Cell Antenna>Degrees of Longitude
for Cell Center
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>UltranCellXXX->LCS
NE->RNC
Radio
>Offset Angle
View->Configuration
and
Cell AntennaManagement->RNC
>Polygon
NE->RNCPoint
Radio
Number
Resource
>UltranCellXXX->LCS
Management->RNC
and
Cell Antenna
NE->RNC
Radio
Resource
>UltranCellXXX->LCS
Management->RNC
and
Cell Antenna
NE->RNC
Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
View->Configuration
>UltranCellXXX->LCS
Resource
Management->RNC
and
Cell Antenna
ManagementNE->RNC
Radio
>UltranCellResource
ManagementAbility
and Cell
>UltranCellReselection>UltranCellXXX>TUTRAN-GPS
>Modify Advanced
Measurement Support
Parameter->NodeB
Indicator
Common
Measurement
View->Configuration
Configuration
Management->RNC
Information
>Period NodeB
Resource
Common
Management->RNC
Measurement
Configuration->Lcs
Configuration
Index for
View->Configuration
over Iur Support
TUTRAN-GPS
Management->RNC
Indicator
NE->RNC Radio
Resource
Management->RNC
Configuration->SAS
View->Configuration
Support
Indicator
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Management->RNC
Management->RNC
Configuration->SAS
NE->RNC
Radio
Support Mode
Resource
Setup Parameters>HSDPA Function
Status
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
Setup
ParametersNE->RNC
Radio
>HSUPA
ResourceFunction
Status
NE->RNC Radio
Setup
ParametersResource
>MBMS
Function
Management->Modify
Status
Advanced
>NodeB Common
Management->RNC
Measurement
NE->RNC
Radio
>TUTRAN-GPS
Management->Modify
Measurement
Advanced
ParameterAccuracy
Class
View->Configuration
>NodeB
Common
Management->RNC
Measurement
View->Configuration
NE->RNC
Radio
Resource
>TUTRAN-GPS
NE->RNC
Radio
Management->Modify
Change
Limit
Resource
Advanced ParameterManagement>NodeB Common
>UltranCellXXXConfiguration>Modify
Advanced
>Predicted
TUTRANParameter->NodeB
GPS Deviation Limit
Common
Measurement
View->Configuration
Configuration
Management->RNC
View->Configuration
Information
Management->RNC
>On Modification
Resource
NE->RNC
Radio
NodeB
Common
ManagementResource
Measurement
>External
UTRAN CellManagement->Logical
Configuration
IndexCell
for
>External
UTRAN
RNC
Associated
With
TUTRAN-GPS
XXX
View->Configuration
PLMN Configuration
Management->RNC
NE->RNC
Radio
RNC XXX->Modify
Resource
RNC
Associated With
and Constants
View->Configuration
PLMN
Configuration
Management->RNC
Time
for
Forwarding
NE->RNC
Radio
RNC
XXX->Modify
GTP-PDU
Resource Data in
Advanced
ParameterSRNC
Management->Logical
>Iu
Interface
Timers
View->Configuration
RNC Associated
With
and
Constants
Management->RNC
PLMN Configuration
NE->RNC
Radio
Time
for
RAB
Queuing
Resource
RNC XXX->Modify
in RNC
Management->Logical
Advanced
ParameterRNC
Associated
With
>Iu Interface
Timers
PLMN
Configuration
and Constants
RNC
XXX->Modify
Waiting
Time for
Advanced
ParameterRESET in RNC
and Constants
Information->Timer
Before Sending
RESET Response to
CN
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
NE->RNC Radio
RNC
XXX->Modify
Resource
>Iu
Timers
View->Configuration
RNCInterface
Associated
With
and
Constants
Management->RNC
PLMN Configuration
Information->SRNC
NE->RNC
Radio
Overall
Protective
Resource
RNC XXX->ModifyTime
for
Relocation
Management->Logical
Advanced
ParameterRNC
Associated
With
>Iu
Interface
Timers
View->Configuration
PLMN
Configuration
and Constants
Management->RNC
Information->SRNC
NE->RNC
Radio
RNC
XXX->Modify
Wait Time
for
Resource
Advanced
RelocationParameterPreparation
Management->Logical
>Iu
Timers
RNCInterface
Associated
With
and
Constants
PLMN Configuration
Information->Timer for
Sending
RESOURCE
RNC XXX->Modify
RESET
Response
to
Advanced
CN
>Iu
Interface Timers
Management->RNC
and
Constants
NE->RNC
Radio
Information->Timer
Resource
forRESOURCE
Management->RNC
View->Configuration
RESET
Response
from
CN
>Emergency
Call
NE->RNC Radio
Redirect
Switch
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->InterNE->RNC Radio
RAT
IuUP Version
Resource
Selection
Management->Modify
View->Configuration
Advanced
>RNC
Radio
Resource
NE->RNC Radio
Management->IntraResource
RAT
IuUP Version
Management->Logical
Selection
RNC
Associated With
PLMN Configuration
View->Configuration
Configuration
Management->RNC
Supplement
NE->RNC
Radio 64K
Information->CS
View->Configuration
Resource
RB
Mode
Switch
Management->RNC
Management->RNC
NE->RNC Radio
Configuration->CBS
Resource
License
Management->Logical
RNC Associated With
PLMN Configuration
View->Configuration
>Modify Advanced
NE->RNC
Radio
Parameter->RNC
Resource
Management->Modify
to PLMN->CDT-IMEI
Advanced
AcquisitionParameterSwitch
>RNC Radio Resource
Management>CDT/MR Overload
Threshold
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Logical RNC
Resource
Associated
With PLMN
Management->Logical
Configuration
RNC Associated With
Information->CDT
PLMN Configuration
Function
Switch
View->Configuration
Information
XXXManagement->RNC
>Logical RNC
NE->RNC
AssociatedRadio
With PLMN
Resource
Configuration
Management->Modify
Information->MR
Advanced
ParameterFunction Switch
View->Configuration
>RNC
Radio
Resource
Management->RNC
Management->MR-UE
NE->RNC Radio
Location
ResourceMeasurement
Reporting Interval
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->MR-UE
NE->RNC Radio
Measurement
Resource
Reporting Interval
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->MR-UE
NE->RNC Radio
Measurement
Report
Resource
Transfer Mode
View->Configuration
Management->Modify
Management->RNC
Radio
>RNC Radio
Resource
Resource
Management->MR-UE
Management->Modify
Measurement Type
Advanced
ParameterSwitch
View->Configuration
>UE Timers and
Management->RNC
Constants InformationNE->RNC
>MaximumRadio
Number of
Resource
Management->Modify
RRC CONNECTION
View->Configuration
Advanced
REQUESTParameterMessage
Management->RNC
>UE
Timers and
(N300)
NE->RNC
Constants Radio
InformationResource
>Maximum Number of
Management->Modify
Advanced
CELL/URAParameterUPDATE
View->Configuration
>UE
Timers
and
Message
(N302)
Management->RNC
Constants
>Maximum
Resource Number of
Retransmissions
of the
Management->Modify
UE
CAPABILITY
Advanced ParameterINFORMATION
View->Configuration
>UE Timers and
Message
Management->RNC
Constants(N304)
InformationNE->RNC
>MaximumRadio
Number of
Resource
"In Sync" Received
Management->Modify
from L1 in Connected
Advanced
ParameterMode (N312
in
>UE
Timers
and
Connected Mode)
Constants Information>Maximum Number of
"In Sync" Received
from L1 in Idle Mode
(N312 in Idle Mode)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>UE Timers and
NE->RNC
Constants Radio
InformationResource
>Maximum Number of
Management->Modify
Successive "Out of
Advanced
ParameterSync" Received
from
View->Configuration
>UE
Timers
and
L1(N313)
Management->RNC
Constants
>Maximum Number of
Resource
Successive
"In Sync"
Management->Modify
Received
from
L1
Advanced ParameterDuring
T313
is
View->Configuration
>UE Timers and
Activated
N315)
Management->RNC
Constants( InformationNE->RNC
Radio
>Waiting Time After
Resource
UE Sending RRC
Management->Modify
CONNECTION
View->Configuration
Advanced
REQUESTParameterManagement->RNC
>UE
Timers and
Message(T300)
NE->RNC
Constants Radio
InformationResource
>Waiting Time After
Management->Modify
UE Sending
Advanced
CELL/URAParameterUPDATE
View->Configuration
>UE
Timers and
Message(T302)
Management->RNC
Constants
>Waiting Time After
Resource
UE
Sending UE
Management->Modify
CAPABILITY
Advanced ParameterINFORMATIONMessa
>UE
Timers and
View->Configuration
ge(T304)
Constants
>Period of Radio
Cell/URA
NE->RNC
Update
When UE is in
Resource
View->Configuration
CELL_FACH/CELL_P
Management->Modify
Management->RNC
CH/
URA_PCH
Advanced
ParameterNE->RNC
Radio
State(T305)
>UE
Timers
Resource and
Constants InformationManagement->Modify
>Waiting
for Cell
AdvancedTime
ParameterReselection
After
View->Configuration
>UE Timers and UE is
out
of Service(T307)
Management->RNC
Constants
InformationNE->RNC
Radio
>Waiting Time
After
Resource
Sending RRC
Management->Modify
CONNECTION
Advanced
RELEASE ParameterView->Configuration
>UE
Timers and
COMPLETE
Message
Management->RNC
Constants
Informationin CELL_DCH
NE->RNC
Radio
>Waiting
Time
After
State(T308)
Resource
Requesting
Management->Modify
Connection
Advanced
ParameterEstablishment
in Other
View->Configuration
>UE
Timers GSM)
and
System(eg.
Management->RNC
Constants
Information(T309)
NE->RNC
Radio
>Waiting Time
for
Resource
Receiving "In Sync"
Management->Modify
from L1 in Connected
Advanced
ParameterMode (T312
in
>UE
Timers
and
Connected Mode)
Constants Information>Waiting Time for
Receiving "In Sync"
from L1 in Idle Mode
(T312 in Idle Mode)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>UE Timers and
NE->RNC
Constants Radio
InformationResource
>Waiting Time After
Management->Modify
DPCCH Established in
Advanced
CELL_DCHParameterState
View->Configuration
>UE
Timers
and
Losing
Sychronization
Management->RNC
Constants
Information(T313)
NE->RNC
Radio
>Waiting
ResourceTime for
Completion
of Cell
Management->Modify
Update
When
Radio
Link Fails
and
Radio
>UE
Timers
and
Management->RNC
Bearer(s)
Associated
Constants
InformationNE->RNC
Radio(T314)
with
T314 Exist
>Waiting
ResourceTime for
Completion
of Cell
Management->Modify
Update
When
Radio
Advanced ParameterLink Fails
and
Radio
>UE
Timers
and
Bearer(s)
Associated
Constants
InformationView->Configuration
with
T315Time
Existfor
(T315)
>Waiting
Cell
Management->RNC
NE->RNC Radio
After
UE is out of
Resource
Service in
ManagementCELL_PCH/URA_PCH
View->Configuration
>UltranCellState(T316)
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>DL Controlled MBR
>Modify Advanced
NE->RNC
Radio
>DL
Controlled MBR
Switch
>Modify Advanced
Resource
Parameter->utranCellManagement>MR-CELL
Switch
>Modify
Advanced
Management->RNC
>MR-CELL
Resource
Measurement
ManagementReporting
Interval
>UltranCellCoefficient
View->Configuration
>Modify Advanced
NE->RNC
Radio
>MR-UE Measurement
ManagementSwitch
View->Configuration
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement>UL Controlled MBR
Parameter->utranCell>UL Controlled MBR
Switch
N/A
If the cell barred
indicator is set to
'Barred', UEs are
not permitted to
select/re-select this
If
InFreqReselInd
cell,
but Ues are is
"Not
Allowed"
permitted
to and
CellRsvExt
handover toisthis
"Reserved",
UEs
cell.
are not permitted to
select/re-select this
cell, but Ues are
permitted to
handover to this
cell.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
Parameter->Cell
Resource
Selection and
ManagementReselection->Access
>UltranCellClass N Barred
View->Configuration
>UltranCellXXXIndicator (N=0...15)
Management->RNC
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Resource
Selection
and
ManagementReselection->Cell
Barred
Indicator
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Resource
Selection
and
View->Configuration
Management->RNC
>UltranCellReservation
Extension
NE->RNC
Radio
>Modify Advanced
ManagementParameter->Cell
>UltranCellSelection and
View->Configuration
>UltranCellXXXReselection->Cell
Management->RNC
>Modify
Advanced
Identity
NE->RNC
Radio
Parameter->Cell
Resource
Selection and
ManagementReselection>UltranCell>Increment
to the
View->Configuration
>UltranCellXXXMinimum
Required
Management->RNC
>Modify Advanced
Received
Level
NE->RNC
Radioin the
Parameter->Cell
Cell(DeltaQrxlevmin)
Resource
Selection and
ManagementReselection>UltranCell>Increment to the
View->Configuration
>UltranCellXXXMinimum Required
Management->RNC
>Modify
ReceivedAdvanced
Level in the
NE->RNC
Radio Tag
Parameter->Cell
Cell Configuration
Resource
Selection and
ManagementReselection->HCS
>UltranCellServing Cell
View->Configuration
Management->RNC
>Modify
Advanced
Configuration
Tag
NE->RNC
Radio
Parameter->Cell
Resource
Selection
and
ManagementReselection->IntraView->Configuration
>UltranCellfrequency
Cell
Management->RNC
>UltranCellXXXReselection
Indicator
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Cell
>UltranCellReselection->InterView->Configuration
>UltranCellXXXfrequency Scaling
Management->RNC
>Modify
Advanced
Factor for
Treselection
NE->RNC
Radio
Parameter->Cell
Resource
Selection and
ManagementReselection->Inter>UltranCellfrequency Scaling
>UltranCellXXXFactor for Treselection
>Modify
Advanced
Configuration
Tag
Parameter->Cell
Selection and
Reselection->InterRAT Scaling Factor for
Treselection
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Resource
Selection
and
Reselection->Inter>UltranCellManagement->RNC
RAT Scaling Factor for
Radio
Treselection
>Modify
Advanced
Resource
Configuration
Tag
Parameter->Cell
ManagementSelection
and
Reselection>UltranCellXXXManagement->RNC
>Maximum
Number of
>Modify
Advanced
NE->RNC
Radio
Cell
Reselections
Parameter->Cell
Resource
(NCR)
Selection
and
Reselection>UltranCellManagement->RNC
>Maximum
Number of
Radio in
Cell Reselections
>Modify
Advanced
Resource
Case
of Non-HCS
Parameter->Cell
ManagementUsage
(NonSelection
and
>UltranCellHCS_NCR)
Reselection->Duration
>UltranCellXXXfor
Evaluating
Allowed
>Modify
Advanced
Amount of Cell
View->Configuration
Parameter->Cell
Reselection(s)
Management->RNC
Selection and in Case
of
Non-HCS
Usage
NE->RNC
Radio
Reselection(Non-HCS_TCRmax)
Resource
>Additional Time
ManagementPeriod Before the UE
>UltranCellCan Revert to LowView->Configuration
>UltranCellXXXMobility
Measurements
Management->RNC
>Modify
Advanced
in
Case
of
Non-HCS
NE->RNC
Radio
Parameter->Cell
View->Configuration
Usage (NonResource
Selection
and
Management->RNC
HCS_TCRmaxHyst)
NE->RNC
Radio
>UltranCellReserved
for
Operator
Resource
>UltranCellXXXUse
Management>Modify Advanced
>UltranCellParameter->Cell
View->Configuration
>UltranCellXXXSelection
and
Management->RNC
>Modify
Advanced
Reselection->InterNE->RNC
Radio
Parameter->Cell
System Information
Resource
Selection
and Tag
Configuration
ManagementReselection->Quality
>UltranCellThreshold
Level for
>UltranCellXXXApplying
Prioritised
>Modify Advanced
View->Configuration
Hierarchical Cell
Parameter->Cell
Management->RNC
Reselection
(QHcs)
Selection
and
NE->RNC
Radio
When
Measurement
Reselection->Quality
Resource
Quantity
isLevel
CPICH
Threshold
for
Ec/No
Applying
Prioritised
Hierarchical Cell
Radio
Reselection(QHcs)
>Modify
Advanced
Resource
When
Measurement
Parameter->Cell
ManagementQuantity
isand
CPICH
Selection
>UltranCellRSCP
Reselection>UltranCellXXX>Reselection
>Modify
Advanced
Hysteresis
1 of Serving
Parameter->Cell
Cell
(QHyst1s)
Selection and
Reselection>Reselection
Hysteresis 1of Serving
Cell for UE in
CELL_FACH State
(QHyst1s, FACH )
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
Management->RNC
Parameter->Cell
NE->RNC
Radio
Selection and
Resource
ReselectionManagement>Reselection
View->Configuration
>UltranCellHysteresis 1 of Serving
Management->RNC
>UltranCellXXXCell for UERadio
in
NE->RNC
>Modify
Advanced
CELL_PCH
or
Resource
Parameter->Cell
URA_PCH State
ManagementSelection
and
(QHyst1s,
PCH)
>UltranCellReselection>UltranCellXXX>Reselection
>Modify
Advanced
Hysteresis
2 of Serving
View->Configuration
Parameter->Cell
Cell
(QHyst2s)
Management->RNC
Selection and
NE->RNC
Radio
ReselectionResource
>Reselection
ManagementHysteresis 2 of Serving
View->Configuration
>UltranCellCell for UE in
Management->RNC
>UltranCellXXXCELL_FACH State
NE->RNC
Radio
>Modify
Advanced
(QHyst2s,
FACH)
Resource
Parameter->Cell
View->Configuration
>UltranCellReselection->
Management->RNC
>Modify
Advanced
Resource
Parameter->Cell
ManagementSelection
and
View->Configuration
>UltranCellReselectionManagement->RNC
>UltranCellXXX>Qqualmin-offset
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Cell
>UltranCellReselection->Minimum
View->Configuration
>UltranCellXXXRequired Received
Management->RNC
>Modify
Advanced
Level
in the
Cell
NE->RNC
Radio
Parameter->Cell
(Qrxlevmin)
Resource
Selection and
ManagementReselection>UltranCell>Measurement
>UltranCellXXXQuantity
for Cell
View->Configuration
>Modify Advanced
Selection
and
Management->RNC
Parameter->Cell
Reselection
NE->RNC
Radio
Selection
and
Resource
Reselection->InterManagementSystem Measurement
View->Configuration
>UltranCellTrigger Threshold for
Management->RNC
>UltranCellXXXHCS Cell Reselection
NE->RNC
Radio
>Modify
Advanced
(SHCS, RAT)
Resource
Parameter->Cell
View->Configuration
Management->RNC
>UltranCellReselection->SHCS,
NE->RNC
Radio Tag
>UltranCellXXXRAT Configuration
Resource
>Modify Advanced
>UltranCellXXXReselection>Modify
Advanced
>Broadcast
in either
Parameter->Cell
SIB3 or SIB4
Selection and
Reselection->InterFrequency
Measurement Trigger
Threshold for Cell
Reselection
(Sintersearch)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
>Modify Advanced
>UltranCellXXXReselectionView->Configuration
>Modify
Advanced
>Sintersearch
Management->RNC
Parameter->Cell
Configuration Tag
NE->RNC
Radio
Selection and
Resource
Reselection->IntraView->Configuration
ManagementFrequency
Management->RNC
Trigger
NE->RNC
Radio
Resource for Cell
>Modify
Advanced
Reselection
(Sintrasearch)
>UltranCellSelection
and
>UltranCellXXXReselection>Modify
Advanced
View->Configuration
>Sintrasearch
Parameter->Cell
Management->RNC
Configuration
Tag
Selection
NE->RNCand
Radio
Reselection->High
Resource
HCS
Priority InterManagementsystem
Cell
View->Configuration
Management->RNC
for Cell
NE->RNC
Radio
>Modify Advanced
Reselection
(Slimit,
Resource
Parameter->Cell
SearchRAT)
View->Configuration
>UltranCellReselection->Speed
Management->RNC
>UltranCellXXXDependent Scaling
NE->RNC
Radio
>Modify
Advanced
Factor for
Treselection
Resource
Parameter->Cell
>UltranCellReselection->Speed
>UltranCellXXXDependent Scaling
View->Configuration
>Modify
Advanced
Factor
for
Treselection
Management->RNC
Parameter->Cell
Configuration
Tag
NE->RNC Radio
Selection and
Resource
ReselectionManagementView->Configuration
>Measurement
Trigger
Threshold
for
HCS
Cell
Radio
Reselection
>Modify
Advanced
Resource
(SsearchHCS)
Parameter->Cell
ManagementSelection
and
>UltranCellReselection>UltranCellXXX>SsearchHCS
View->Configuration
>Modify Advanced
Configuration
Tag
Management->RNC
Parameter->Cell
NE->RNC
Radio
Selection and
Resource
Reselection->InterView->Configuration
ManagementSystem Measurement
Management->RNC
>UltranCellTrigger Threshold
NE->RNC
Radio for
>UltranCellXXXCell Reselection
Resource
>Modify
Advanced
(Ssearch,
RAT)
>UltranCellSelection
and
>UltranCellXXXReselection->Cell
>Modify
Advanced
Barred
Time(Tbarred)
Parameter->Cell
Selection and
Reselection->Duration
for Evaluating Allowed
Amount of Cell
Reselection(s) in Case
of Non-HCS Usage
(Non-HCS_TCRmax)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
Management->RNC
Parameter->Cell
NE->RNC
Radio
Selection and
Resource
ReselectionManagement>Additional Time
View->Configuration
>UltranCellPeriod Before the UE
Management->RNC
>UltranCellXXXCan
Exit HighNE->RNC
Radio
>Modify
Advanced
mobilityin
Case of HCS
Resource
Parameter->Cell
Usage (TCrMaxHyst)
ManagementSelection
and
View->Configuration
>UltranCellReselection->Cell
Management->RNC
>UltranCellXXXReselection
Timer
NE->RNC
Radio
>Modify Advanced
Value
(Treselections)
Resource
Parameter->Cell
>UltranCellReselection->Cell
>UltranCellXXXReselection Timer
View->Configuration
>Modify
Value forAdvanced
UE in
Management->RNC
Parameter->Cell
CELL_FACH
State
NE->RNC
Radio
Selection
and FACH)
(Treselections,
Resource
Reselection->Cell
ManagementReselection
View->Configuration
>UltranCell- Timer
Value for UE in
Management->RNC
>UltranCellXXXCELL_PCH
or
NE->RNC
Radio
>Modify Advanced
URA_PCH
State
Resource
Parameter->Cell
(Treselections,
ManagementSelection and PCH)
>UltranCellReselection->Switch of
>UltranCellXXXDeferred
View->Configuration
>Modify
Advanced
SIB11/11bis/12
Management->RNC
Parameter->Cell
Support
NE->RNC Radio
Selection and
Resource
Reselection->IntraManagement->Modify
frequency
reporting
Advanced
quantity
SIB3
when
>UE
Inter-frequency
Management->RNC
SIB11/11bis/12
Measurement
Relative
NE->RNC
Radio
deferred
to Traffic reading
CategoryResource
>UE
Inter-frequency
Management->Modify
Event
Measurement
Advanced
Configuration
Index for
>UE
Inter-frequency
Management->RNC
CPICH
Ec/No
Measurement
Relative
NE->RNC Radio
to
Traffic CategoryResource
>UE
Inter-frequency
Management->Modify
Event
Measurement
Advanced
Configuration
Index for
>UE
Inter-RAT
Management->RNC
CPICH
RSCP
Measurement
Relative
NE->RNC Radio
to
Traffic CategoryResource
>UE
Event Report
Management->Modify
Configuration
Index for
Advanced
Own
System
CPICH
>UE
Inter-RAT
Management->RNC
Ec/No(EUTRAN
FDD)
Measurement
Relative
NE->RNC Radio
to
Traffic
CategoryResource
>UE
Event Report
Management->Modify
Configuration
Index for
Advanced ParameterOwn
System
CPICH
>UE Inter-frequency
RSCP(EUTRAN
FDD)
Measurement Relative
to Traffic Category>UE Periodic
Measurement
CPICH Ec/No
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>UE Inter-frequency
NE->RNC
Radio
Measurement
Relative
Resource
to Traffic CategoryManagement->Modify
>UE Periodic
Advanced
View->Configuration
>UE
Inter-frequency
Configuration
Index for
Management->RNC
Measurement
Relative
CPICH RSCP
NE->RNC
Radio
to
Traffic
CategoryResource
>Service
and Bearer
Management->Modify
Type
Used
for
Advanced ParameterDifferentiating
View->Configuration
>UE
Inter-frequency
Handover
Management->RNC
Configuration
NE->RNC
Radio
to Traffic CategoryResource
>Inter-frequency
Management->Modify
Measurement
Advanced
Index
View->Configuration
>UE
Inter-frequency
Related
to
Traffic
Management->RNC
Measurement
Relative
Category
NE->RNC Radio
>UE
Inter-frequency
Management->Modify
Event
Measurement
View->Configuration
Advanced
Index for
Management->RNC
>UE Inter-frequency
CPICH
Ec/No(GSM)
NE->RNC
Radio
Resource
>UE Inter-frequency
Advanced
ParameterEvent Measurement
View->Configuration
>UE
Inter-frequency
Configuration
Index for
Management->RNC
Measurement
Relative
CPICH RSCP(GSM)
NE->RNC
Radio
to
Traffic
CategoryResource
>UE
Inter-frequency
Management->Modify
Event
Measurement
View->Configuration
Advanced
Index for
Management->RNC
>UE
Inter-frequency
CPICH
NE->RNC
Radio
Measurement
Relative
Ec/No(EUTRAN
FDD)
Resource
>UE Inter-frequency
View->Configuration
Advanced
ParameterEvent Measurement
Management->RNC
>UE
Intra-frequency
NE->RNC
Radio
Measurement
Relative
CPICH
RSCP
View->Configuration
Resource
to
Traffic Category
(EUTRAN
FDD)
Management->RNC
Management->Modify
Configuration
NE->RNC
Radio
Advanced
ParameterInformation->Service
Resource
>UE
Intra-frequency
and Bearer
Type Used
Relative
for Differentiating
>UltranCellto
Traffic
Category
Handover
View->Configuration
>UltranCellXXXConfiguration
Configuration
Management->RNC
>Modify
Advanced
Information->IntraNE->RNC
Parameter->MBMS
frequency Radio
Resource
Configuration
Measurement
In Index
A CellConfiguration
>UltranCell>Offset
Normal
Related to
to the
Traffic
>UltranCellXXXHCS
Priority Level
Category
>Modify
Used forAdvanced
Cells
Parameter->MBMS
Belonging to the
Configuration
MBMS Preferred
Information
In A CellFrequency Layer
>Additional
Offset
When UE is in Lowto
Cells
Belonging to the
Mobility
MBMS
Preferred
State(HCS_OFFmbms
Frequency
Layer
)
When Judging the
Cell-Ranking Criterion
R of Cell Reselection
for the Non-HCS Cell
(Qoffmbms)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>UE
Inter-RAT
Management->RNC
Measurement
Relative
NE->RNC Radio
>UE
Event Report
Management->Modify
Configuration
Index for
Advanced
Own
System
CPICH
>UE
Inter-RAT
Management->RNC
Ec/No
Measurement
Relative
NE->RNC Radio
>UE
Event Report
Management->Modify
Configuration
Index for
Advanced
Own
System
CPICH
>UE
Inter-RAT
Management->RNC
RSCP
Measurement
Relative
NE->RNC Radio
>Periodical
Report
Management->Modify
Configuration
Index for
View->Configuration
Advanced ParameterOwn
System
CPICH
Management->RNC
>UE Inter-RAT
Ec/No
NE->RNC
Radio
Measurement
Relative
Resource
>Periodical Report
Advanced
Index for
View->Configuration
>UE
Own Inter-RAT
System CPICH
Management->RNC
Measurement
Relative
RSCP
NE->RNC
Radio
to
Traffic
CategoryResource
>Service
and Bearer
Management->Modify
Type
Used
for
Advanced ParameterDifferentiating
>UE
Inter-RAT
Handover
Measurement
Relative
View->Configuration
Configuration
to
Traffic
CategoryManagement->RNC
>Inter-RAT
NE->RNC Radio
Measurement
Resource
Configuration Index
ManagementRelated
toGSM
TrafficCellView->Configuration
>External
Category
Management->RNC
>External GSM Cell
NE->RNC
Radio
XXX->Modify
Resource
Advanced ParameterManagement>Cell Individual Offset
View->Configuration
>External GSM Cell
NE->RNC
Radio
XXX->Modify
Resource
Advanced ParameterManagement>DeltaQrxlevmin in
>External
GSM CellSib11
View->Configuration
>External GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
>DeltaQrxlevmin in
ManagementSIB11Configuration
View->Configuration
>External
GSM CellTag
Management->RNC
>External GSM Cell
NE->RNC
Radio
XXX->Modify
Resource
>External
GSM CellSIB12
>External GSM Cell
XXX->Modify
Advanced Parameter>DeltaQrxlevmin in
SIB12 Configuration
Tag
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>External
>External
GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
Advanced
Resource Parameter>GSM
Downlink Load
ManagementThreshold
>External
>External
GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
Advanced
Downlink RT
ManagementLoad
Threshold
>External
>External
GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
Advanced
Uplink Load
ManagementThreshold
>External GSM CellView->Configuration
>External GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
>GSM Uplink RT Load
ManagementThreshold
>External
>External
GSM Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>HCS_PRIO
Management>External
>External
GSM Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>Qrxlevmin in SIB11
>External GSM Cell
Management->RNC
XXX->Modify
NE->RNC
Radio
>Qrxlevmin in SIB12
NE->RNC
Radio
XXX->DeltaQrxlevmin
Resource
in SIB11
NE->RNC
Radio
XXX->DeltaQrxlevmin
Resource
in SIB11 Configuration
ManagementTag
View->Configuration
NE->RNC
Radio
XXX->Modify
Resource
>External
UTRAN CellSIB12
XXX->Modify
Advanced Parameter>DeltaQrxlevmin in
SIB12 Configuration
Tag
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
NE->RNC
Radio
XXX->HCS_PRIO
Resource
NE->RNC
Radio in
XXX->Qqualmin
Resource
SIB11
Management->RNC
XXX->Modify
NE->RNC
Radio
>Qqualmin in SIB12
NE->RNC
Radio in
XXX->Qrxlevmin
Resource
SIB11
NE->RNC
Radio
XXX->Modify
Resource
Advanced ParameterManagement>Qrxlevmin in SIB12
>UltranCell->GSM
View->Configuration
Neighbouring Cell
Management->RNC
XXX->UE State
NE->RNC
Radio
Indicator Used
for
Resource
GSM Neighboring Cell
>UltranCell->GSM
View->Configuration
Neighbouring
Cell
Management->RNC
XXX->Measurement
NE->RNC Radio
Priority
of Neighboring
Resource
GSM Cell
>UltranCell->GSM
Management->RNC
Neighbouring Cell
NE->RNC
Radio
XXX->Modify
Resource
Advanced ParameterManagement>Penalty Time in SIB11
View->Configuration
>UltranCell->GSM
Management->RNC
Neighbouring
Cell
NE->RNC Radio
XXX->->Modify
Resource
Advanced
ParameterManagement>Penalty
Time
in
>UltranCell->GSM
View->Configuration
SIB12
Neighbouring
Cell
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>Quality
Threshold
ManagementLevel
(Qhcs)
of
>UltranCell->GSM
Neighbouring
Neighbouring Cell
Cell
Broadcasted
in SIB11
XXX->->Modify
Advanced Parameter>Quality Threshold
Level (Qhcs) of
Neighbouring Cell
Broadcasted in SIB12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
Neighbouring
Cell
Management->RNC
XXX->->Modify
NE->RNC Radio
Advanced
Resource Parameter>Quality
Offset 1
Management(Qoffset1s,
n) Between
>UltranCell->GSM
Serving Cell and
Neighbouring
Cell
Neighbouring
View->Configuration
XXX->Modify Cell
Broadcasted
in SIB11
Management->RNC
Radio
>Quality Offset 1
Resource
ManagementServing Cell and
>UltranCell->GSM
Neighbouring
Cell
View->Configuration
Neighbouring
Cell
Broadcasted
in
SIB12
Management->RNC
XXX->Modify
NE->RNC
Radio
Advanced
Resource Parameter>Temporary_offset1
in
ManagementSIB11
>UltranCell->GSM
Neighbouring Cell
View->Configuration
XXX->Modify
Management->RNC
Radio
>Temporary_offset1
in
Resource
SIB12
>UltranCell->GSM
Management->RNC
Neighbouring
Cell
NE->RNC Radio
XXX->Use
of
HCS
Resource
View->Configuration
Neighbouring
Cell
Management->RNC
XXX->Broadcast
NE->RNC Radio in
either
SIB11 or
Resource
SIB11bis
Management->Modify
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC
Radio
Resource
Coefficient
View->Configuration
Management->Modify
Management->RNC
Radio
>UE Inter-frequency
Resource
Measurement
Management->Modify
Configuration
Advanced
>UE
Inter-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration->InterResource
frequency
Management->Modify
Measurement
Advanced
Index
>UE Inter-frequency
View->Configuration
Measurement
Management->RNC
Radio
>Function of
Resource
Configuration
Management->Modify
Parameters
Advanced Parameter>UE Inter-frequency
Measurement
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC
Radio
Resource
Number of InterManagement->Modify
frequency
Advanced
>UE
Inter-frequency
View->Configuration
Measurement
Management->RNC
>Measurement
Resource
Quantity
Management->Modify
View->Configuration
Advanced
>UE Inter-frequency
NE->RNC
Radio
Measurement
Resource
Configuration->
Management->Modify
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC
Radio
>Reporting Interval in
Management->Modify
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC
Radio
>Reporting Criteria
Management->Modify
Advanced
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE Inter-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE
Inter-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Management->Modify
Advanced
>UE
Inter-frequency
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
View->Configuration
Management->Modify
Management->RNC
Radio
>UE Inter-frequency
Resource
Measurement
Parameter->Balance
Information->Load
Balance Switch of Call
Holding Procedure
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Balance Switch of Call
Holding
Procedure
>Modify
Advanced
Resource
Parameter->Balance
ManagementInformation->CS
Balance Switch of RAB
Assignment
Procedure
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->UTRAN
ManagementDownlink
Available
>UltranCellLoad Balance
Threshold
(Code) for
>Modify
Advanced
Management->RNC
CS
Parameter->Balance
NE->RNC Radio
Information->UTRAN
Resource
Downlink
Available
ManagementLoad Balance
Threshold
(Code) for
R99
PS
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->HSDPA
ManagementThroughput Weight for
Load
Balance
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
View->Configuration
ManagementBalance Switch for
Management->RNC
>UltranCellDownlink
Power
NE->RNC
Radio
>Modify Advanced
ManagementParameter->Balance
>UltranCellInformation->Downlink
View->Configuration
>UltranCellXXXPower Weight for Load
Management->RNC
>Modify
Balance Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->UTRAN
ManagementDownlinkAvailable
View->Configuration
Management->RNC
>Modify
Advanced
(HSDPAThroughput)
NE->RNC
Radio
Parameter->Balance
for HSDPA
Resource
Information->UTRAN
ManagementDownlink
Available
Load Balance
Threshold
(Power) for
>Modify
Advanced
NE->RNC
Radio
CS
Parameter->Balance
Resource
Information->Inter-RAT
ManagementDownlink
Available
(Power) for
>Modify Advanced
CS
Parameter->Balance
Information->UTRAN
Downlink Available
Load Balance
R99 PS
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Permitted
ManagementPayload
Difference
Downlink
Available
Load
Threshold
in
>Modify
Advanced
NE->RNC
RadioCells
Inter-frequency
Parameter->Balance
Resource
(Code)
ManagementPayload
Difference
Downlink
Available
Load
Threshold
in
>Modify
Advanced
NE->RNC
RadioCells
Inter-frequency
Parameter->Balance
Resource
(HSDPA
Throughout)
ManagementPayload
Difference
>UltranCellDownlink
Available
>UltranCellXXXLoad
Threshold
in
View->Configuration
>Modify Advanced
Inter-frequency
Cells
Management->RNC
Parameter->Balance
(Power)
NE->RNC
Radio
Resource
Payload Difference
ManagementUplink Available Load
>UltranCellThreshold in InterView->Configuration
>UltranCellXXXfrequency Cells
Management->RNC
>Modify
Advanced
(Interference)
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
ManagementBalance Switch of
Initial
RRC Procedure
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
ManagementBalance Switch of
Initial
RRC Procedure
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
Code
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Code
ManagementWeight for Load
Balance
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
HSDPA
Throughput
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
ManagementBalance Switch of RAB
>UltranCellAssignment
Procedure
Parameter->Balance
Balance Switch of RAB
Assignment Procedure
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->Load
View->Configuration
>UltranCellUplink
Interference
Management->RNC
Radio
>Modify Advanced
Resource
Parameter->Balance
ManagementInformation->Uplink
View->Configuration
>UltranCellInterference Weight for
Management->RNC
>UltranCellXXXLoad Balance
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Balance
ManagementInformation->UTRAN
>UltranCellUplink Available Load
View->Configuration
>UltranCellXXXBalance Threshold
Management->RNC
>Modify
Advanced
(Interference)
for CS
NE->RNC
Radio
Parameter->Balance
Resource
Information->InterManagementSystem
Uplink
>UltranCellAvailable Load
View->Configuration
>UltranCellXXXBalance
Threshold
Management->RNC
>Modify Advanced
(Interference)
for CS
NE->RNC
Radio
Parameter->Balance
Resource
Information->UTRAN
ManagementUplink Available Load
>UltranCellBalance Threshold
View->Configuration
>UltranCellXXX(Interference)
for R99
Management->RNC
>Modify
Advanced
PS
NE->RNC Radio
Parameter->Balance
Resource
Information->Cpich
ManagementEcNo
Threshold for
>UltranCellDual
Carrier
HSDPA
>UltranCellXXXBalance
View->Configuration
>Modify Advanced
Management->RNC
Parameter->Balance
NE->RNC
Radio
Information->Cpich
Resource
RSCP Threshold for
ManagementDual Carrier HSDPA
>UltranCellBalance
View->Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information
Parameter->Balance
Information
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management>UltranCell>UltranCellXXX>Modify
Advanced
View->Configuration
Parameter->Balance
Management->RNC
Information->Dual
NE->RNC Radio
Carrier
Balance Switch
Resource
of
Initial
RRC
ManagementProcedure
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Frequency Reselection
and Priority
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
and Priority
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
NE->RNC
FrequencyRadio
Reselection
Resource
and Priority
Management->Modify
View->Configuration
Advanced
>UE
Inter-Rat
NE->RNC Radio
Measurement
Resource
Configuration
Management->Modify
InformationParameterAdvanced
View->Configuration
>UE Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Management->Modify
Measurement Event
Advanced
ParameterNumber
View->Configuration
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Information->UTRAN
Management->Modify
Filter
Coefficient
Advanced
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Information->GSM
Management->Modify
Filter
Coefficient
Advanced
>UE Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Information->EUtran
Management->Modify
Filter Coefficient
View->Configuration
Advanced
>UE
Inter-Rat
NE->RNC Radio
Measurement
Resource
Configuration
Management->Modify
InformationParameterAdvanced
>UE Inter-Rat
Measurement
Configuration
Measurement
Configuration Index
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
>UE Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Information->Function
Management->Modify
of Configuration
View->Configuration
Advanced
ParametersParameterManagement->RNC
>UE Inter-Rat
NE->RNC
Radio
Measurement
Resource
Configuration
Management->Modify
Information->UTRAN
Advanced
Quantity
View->Configuration
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Information->Amount
Management->Modify
of Reporting
in Period
Advanced
ParameterReport
Criteria
View->Configuration
>UE Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Information->Reporting
Management->Modify
Interval in Period
Advanced
ParameterReport Criteria
View->Configuration
>UE Inter-Rat
Management->RNC
Measurement
NE->RNC
Radio
Configuration
Resource
Information->Reporting
Management->Modify
Criteria
Advanced
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Information
Management->Modify
Advanced
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC Radio
Configuration
Resource
Information
Management->Modify
Advanced
>UE
Inter-Rat
Management->RNC
Measurement
NE->RNC Radio
Configuration
View->Configuration
Resource
Information
Management->RNC
Management->Modify
NE->RNC
Radio
>UE Inter-Rat
Management->Logical
Measurement
RNC
Associated With
Configuration
View->Configuration
PLMN
Configuration
Information
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
PLMN Configuration
Information->AMR
Information XXXInter
Frequency
>Modify
Advanced
Handover Switch
Parameter->RNC
Configuration
Supplement
Information->AMR
Inter Rat Handover
Switch
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC
Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->HSDPA
Information
XXXNE->RNC
Radio
Inter
Frequency
>Modify
Advanced
Resource
Handover
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->HSDPA
Information
XXXNE->RNC
Radio
Inter
RatAdvanced
Handover
>Modify
Resource
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->HSDPA
Information
XXXNE->RNC
Radio
Inter
Frequency
>Modify
Advanced
Resource
Handover
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->HSDPA
Information
XXXNE->RNC
Radio
Inter
RatAdvanced
Handover
>Modify
Resource
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->R99
Information
XXX- NRT
NE->RNC
Radio
Inter
Frequency
>Modify
Advanced
Resource
Handover
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->R99
Information
XXX- NRT
NE->RNC
Radio
Inter
Rat
Handover
>Modify
Advanced
Resource
Switch
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
PLMN Configuration
Information->R99
Information XXX- RT
Inter
Frequency
View->Configuration
>Modify
Advanced
Handover Switch
Management->RNC
Parameter->RNC
NE->RNC
Radio
Configuration
Resource
Supplement
View->Configuration
Management->Modify
Information->R99 RT
Management->RNC
Advanced
ParameterInter Rat Handover
NE->RNC
Radio
>RNC
Radio
Resource
Switch
Resource
Management->Dual
Management->Logical
Carrier Redirection
View->Configuration
RNC
Associated
Strategy
Switch With
Management->RNC
PLMN Configuration
NE->RNC
InformationRadio
XXXResource
>Modify Advanced
Management->Logical
Parameter->RNC
RNC
Associated
With
Configuration
Related
PLMN
Configuration to
to PLMN->Handover
Information
XXXGSM Penalty
Timer
>Modify Advanced
Parameter->RNC
to PLMN->Service
Handover Combination
Strategy
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
View->Configuration
to PLMN->Service
PLMN
Configuration
Management->RNC
Handover
Strategy
Information
XXX- of
NE->RNC
Radio
RNC
for
AMR
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
View->Configuration
RNC Associated
With
to PLMNManagement->RNC
PLMN
Configuration
>Compressed
Mode
NE->RNC
InformationRadio
XXXConfiguration
Strategy
Resource
>Modify Advanced
Management->Logical
Parameter->RNC
RNC
Associated
With
Configuration
Related
View->Configuration
PLMN
Configuration
to PLMN->Service
Management->RNC
Information
XXX- of
Handover
NE->RNC Strategy
Radio
>Modify
Advanced
RNC
for
CS64
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
to
PLMN->Service
View->Configuration
PLMN Configuration
Handover
Management->RNC
InformationStrategy
XXX- of
RNC
for
PS
NRT
NE->RNC
Radio
>Modify Advanced
Service
Resource
Parameter->RNC
Management->Logical
RNC
Associated With
to PLMN->Service
View->Configuration
PLMN
Configuration
Handover
Strategy of
Management->RNC
Information
RNC for PS XXXRT
NE->RNC
Radio
>Modify
Service Advanced
Resource
Parameter->RNC
Management->Modify
View->Configuration
Advanced
Parameterto PLMN->Service
Management->RNC
>RNC
Radio
Resource
Handover
Strategy
NE->RNC Radio
Management->Timer
Indicator
Resource
for Stopping InterManagementfrequency
Measurement
and
Activating
Inter-RAT
>Modify
Advanced
NE->RNC
Radio
Measurement
Parameter->UE
Resource
Measurement
>UltranCell- In
System
Information
View->Configuration
>UltranCellXXXBlock->UE
InterManagement->RNC
>Modify Advanced
frequency
FDD
NE->RNC
Radio
Parameter->UE
Resource
Measurement
ManagementConfiguration In
>UltranCellSystem Information
>UltranCellXXXBlock->UE InterView->Configuration
>Modify
Advanced
System Measurement
Management->RNC
Parameter->UE
Indicator Radio
NE->RNC
Measurement
Resource
Configuration
Management- In
System Information
>UltranCellBlock->Broadcast
>UltranCellXXX- in
SIB11
orAdvanced
SIB12
>Modify
Parameter->utranCell>Absolute Priority
Reselection Criteria
Switch
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>neighbouring
Management->RNC
cellXXX->Modify
NE->RNC
Radio
Advanced
Resource Parameter>utranRelation->Cell
ManagementIndividual
Offset
>Modify Advanced
NE->RNC
Radio
>Detected Set
ManagementHandover Switch
Management->RNC
Setup Parameters->DL
NE->RNC
Radio for
Tx Power Switch
Resource
Handover
NE->RNC
Radio
Setup
ParametersResource
>HCS_PRIO
>Modify Advanced
NE->RNC
Radio
>Inter-frequency
Handover
Method
>Modify Advanced
Resource
Parameter->utranCellManagement>Inter-frequency
>UltranCellHandover
Tactic
>Modify
Advanced
Management->RNC
Radio
>UTRAN
Resource
Measurement
View->Configuration
Management- Quantity
for
Intra-frequency
Management->RNC
>UltranCellMeasurements
NE->RNC
Radio
>Modify Advanced
ManagementParameter->utranCell>UltranCell>Inter-RAT Handover
>UltranCellXXXMethod
>Modify Advanced
View->Configuration
>UTRAN
NE->RNC
Radio
Measurement
Quantity
Resource
for Inter-frequency and
ManagementInter-RAT
View->Configuration
>UltranCellMeasurements
Management->RNC
NE->RNC Radio
Setup
ParametersResource
>Preferred
Traffic Type
Parameter->utranCell>Inter-RAT Handover
Tactic
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
View->Configuration
>UltranCellNE->RNC
Radio
Resource
Setup Parameters
>Modify Advanced
NE->RNC
Radio
>Service
Handover
Switch
>Modify Advanced
Resource
Parameter->utranCellManagement>Soft
Handover
Method
Management->RNC
Setup
ParametersNE->RNC
Radio
>Inter-frequency
Resource
Measurement
Index
Related
to
Traffic
Management->RNC
Category
Setup
ParametersNE->RNC
Radio
>Intra-frequency
Resource
Measurement
>UltranCell- Index
Related
to Traffic
Category
View->Configuration
Setup ParametersManagement->RNC
>Inter-RAT
NE->RNC
Radio
Measurement
Resource
Configuration Index
ManagementRelated to Traffic
>UltranCellCategory
View->Configuration
Management->RNC
Setup
Parameters->UL
NE->RNC
Radio
BLER
Switch
for
Resource
Handover
Management->RNC
Radio
>UE Tx Power
Switch
Resource
for Handover
View->Configuration
>UltranCellNE->RNC
Radio
Resource
Setup ParametersManagement>Use of HCS
>Modify Advanced
NE->RNC
Radio
>Inter Frequency or
ManagementInter RAT handover
>UltranCellSwitch
>neighbouring
cellXXX->Modify
Advanced Parameter>utranRelation->Cell
Individual Offset
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>neighbouring
Management->RNC
cellXXXNE->RNC
RadioPriority
>Measurement
Resource
of Neighboring Cell
View->Configuration
>UltranCellNE->RNC
Radio
>neighbouring
Resource
cellXXX->Penalty Time
Managementin SIB11
>neighbouring
Management->RNC
cellXXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>utranRelationManagement>Penalty Time in
SIB12
>neighbouring
Management->RNC
cellXXX->Modify
NE->RNC Radio
Advanced
Resource Parameter>utranRelation->Qhcs
Managementfor CPICH Ec/No in
SIB11
>neighbouring
Management->RNC
cellXXX->Modify
NE->RNC Radio
Advanced
Managementfor CPICH Ec/No in
SIB12
>neighbouring
Management->RNC
cellXXX->Modify
NE->RNC Radio
Advanced
View->Configuration
Managementfor CPICH RSCP in
Management->RNC
>UltranCellSIB11
NE->RNC
Radio
>neighbouring
Resource
cellXXX->Modify
ManagementAdvanced Parameter>UltranCell>utranRelation->Qhcs
View->Configuration
>neighbouring
for CPICH RSCP in
Management->RNC
cellXXX->Modify
SIB12
NE->RNC Radio
Advanced
Resource Parameter>utranRelationManagement>Quality
Offset 1
>UltranCell(Qoffset1s,
n) Between
View->Configuration
>neighbouring
Serving
Cell
and
Management->RNC
cellXXX->Modify
Neighbouring
Cell
NE->RNC
Radio
Advanced ParameterBroadcasted in SIB11
Resource
>utranRelationManagement>Quality Offset 1
>UltranCell(Qoffset1s, n) Between
View->Configuration
>neighbouring
Serving Cell and
Management->RNC
cellXXX->Modify
Neighbouring
Cell
NE->RNC
Radio
Advanced
ParameterBroadcasted
in SIB12
Resource
>utranRelationManagement>Quality
Threshold
>UltranCellLevel (Qhcs) of
>neighbouring
Neighbouring
Cell
cellXXX->Modify
Broadcasted
in
SIB11
Advanced Parameter>utranRelation>Quality Threshold
Level (Qhcs) of
Neighbouring Cell
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>neighbouring
NE->RNC
Radio
cellXXX->Broadcast
in
Resource
either SIB11 or
ManagementSIB11bis
View->Configuration
>neighbouring
NE->RNC Radio
cellXXX->UE State
Resource
Indicator
Used for
ManagementUTRAN
Neighboring
View->Configuration
>UltranCellCell
Configuration
Management->RNC
>neighbouring
NE->RNC
Radio
cellXXX->emporary
Resource
Offset When
ManagementMeasurement Quantity
>UltranCellis CPICH RSCP
View->Configuration
>neighbouring
(Temporary_offset1)
Management->RNC
cellXXX->Modify
NE->RNC
Radio
>utranRelationManagement>Temporary_offset
View->Configuration
>UltranCell(Temporary_offset1)
Management->RNC
>neighbouring
for CPICH RSCP
NE->RNC
Radio
cellXXX->Temporary
Broadcasted
in SIB12
Resource
Offset When
ManagementMeasurement Quantity
>UltranCellis CPICH Ec/No
>neighbouring
(Temporary_offset2)
cellXXX->Modify
Advanced
>utranRelationManagement->RNC
>Temporary_offset
NE->RNC Radio
(Temporary_offset2)
Resource
for
CPICH EC/No
View->Configuration
ManagementBroadcasted
Management->RNC
>UltranCell- in SIB12
NE->RNC
Radio
>neighbouring
Resource
cellXXX->Use of HCS
Radio
>Modify Advanced
Resource
Parameter->Balance
View->Configuration
ManagementInformation->Load
Management->RNC
>UltranCellBalance Switch for CE
NE->RNC
Radio
>Modify Advanced
ManagementParameter->Balance
>UltranCellInformation->Load
>UltranCellXXXBalance Switch for
View->Configuration
>Modify
Advanced
Bandwidth
Management->RNC
Parameter->Balance
NE->RNC
Radio
Resource
Payload Difference
ManagementDownlink Available
>UltranCellLoad Threshold in
>UltranCellXXXInter-frequency Cells
>Modify
(HSUPA Advanced
Throughput)
Parameter->Balance
Information->HSUPA
Throughput Weight for
Load Balance
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
Management->RNC
Parameter->Balance
NE->RNC Radio
Information->UTRAN
Resource
Uplink
Available Load
ManagementBalance Threshold
View->Configuration
>UltranCell(HSUPA
Throughput)
Management->RNC
>UltranCellXXXfor
HSUPA
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->Balance
ManagementInformation->User
>UltranCellNumber Offset of
View->Configuration
>UltranCellXXXUTRAN for Balance
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->User
ManagementNumber Offset of GSM
>UltranCellin Multi-Mode System
View->Configuration
>UltranCellXXXfor Balance
Management->RNC
>Modify Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information->User
ManagementNumber Offset of GSM
>UltranCellfor Balance
>Modify Advanced
Management->RNC
Parameter->Balance
NE->RNC Radio
Information->GSM
View->Configuration
Resource
Cell's
Carrier Number
Management->RNC
Management->Qos
NE->RNC
RelevanceRadio
Resource
Configuration->Qos
Management->Logical
Configuration->Qos
RNC
Associated
With
Configuration
XXX
View->Configuration
PLMN
Configuration
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
View->Configuration
to PLMN->Service
PLMN
Configuration
Management->RNC
Handover
Strategy
Information
XXXNE->RNC
Radio
Indicator
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
View->Configuration
RNC Associated
With
to PLMN->Service
Management->RNC
PLMN
Configuration
Handover
NE->RNC
Radio
InformationStrategy
XXX- of
RNC
for
AMR
Resource
>Modify Advanced
Management->Logical
Parameter->RNC
RNC
Associated
With
Configuration
Related
View->Configuration
PLMN
Configuration
to PLMN->Service
Management->RNC
Information
XXX- of
Handover
NE->RNC Strategy
Radio
>Modify
Advanced
RNC
for
CS64
Resource
Parameter->RNC
Management->Logical
Configuration
Related
RNC Associated
With
to
PLMN->Service
PLMN Configuration
Handover
InformationStrategy
XXX- of
RNC
for
PS
RT
>Modify Advanced
Service
Parameter->RNC
to PLMN->Service
Handover Strategy of
RNC for PS NRT
Service
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
View->Configuration
PLMN Configuration
Management->RNC
Radio
>Logical RNC
Resource
Management->Logical
Configuration
View->Configuration
RNC
Associated With
Information->RNC
Management->RNC
PLMN
Configuration
Switch
for PS
NE->RNC
Radio
Information
XXXHandover
LTE
Resource with
>Logical RNC
Management->Logical
Associated
With PLMN
RNC
Associated
With
View->Configuration
Configuration
PLMN
Configuration
Management->RNC
Information->RNC
Information
XXXNE->RNC
Radio
SRVCC
Switch
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->R99
Information
XXX- RT
NE->RNC
Radio
Inter
Rat(EUTRAN)
>Modify
Advanced
Resource
Handover
Switch
Parameter->RNC
Management->Logical
Configuration
RNC
Associated With
View->Configuration
Supplement
PLMN
Configuration
Management->RNC
Information->R99
Information
XXX- NRT
NE->RNC
Radio
Inter
Rat(EUTRAN)
>Modify
Advanced
Resource
Handover
Switch
Parameter->RNC
Management->Logical
Configuration
RNC Associated With
Supplement
PLMN Configuration
Information->HSDPA
Information
XXXView->Configuration
Inter
Rat(EUTRAN)
>Modify
Advanced
Management->RNC
Handover
Switch
Parameter->RNC
NE->RNC
Radio
Configuration
Resource
Supplement
ManagementInformation->HSUPA
View->Configuration
>UltranCellInter
Rat(EUTRAN)
Management->RNC
>UltranCellXXXHandover
Switch
NE->RNC
Radio
>Modify Advanced
Resource
Parameter->utranCellManagement->Modify
>Choice Strategy in
Advanced
ParameterMulti-RAT Handover
View->Configuration
>RNC
Radio
Resource
Management->RNC
>Threshold
Resource of Adding
New
Radio Link Based
Management->Modify
On Ec/N0 In
Soft
Advanced
ParameterHandover
>RNC Radio Resource
>Threshold
of Adding
Management->RNC
New
Radio
Link
NE->RNC RadioBased
On RSCP In Soft
Resource
Handover
View->Configuration
>UltranCellNE->RNC
Radio
Resource
Setup Parameter
Parameter->utranCell>Adding New Radio
Link Judgement Switch
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell Load
Resource
Control
Configuration
Managementin
MultiMode
System>UltranCellView->Configuration
>RTWP
Load
Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>RTWP
Load
Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>RTWP
Load
High
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>TCP
Load
Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>TCP
Load
Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>TCP
Load
High
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>Code
Load
Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Load
Resource
Control
Configuration
Managementin
MultiMode System>UltranCellView->Configuration
>Code
Load Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Load
Resource
Control
Configuration
Managementin
MultiMode System>UltranCellView->Configuration
>CE
Load Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Parameter->Cell
Load
Resource
Control
Configuration
Managementin
MultiMode System>UltranCell>CE
Load Middle
>Modify Advanced
Control Configuration
in MultiMode System>HSDPA User Number
Low Threshold
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>HSDPA
User
Number
Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>HSUPA
User
Number
Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>HSUPA
User
Number
Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>MBMS
User
Number
Low
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>MBMS
User
Number
Middle
Threshold
>Modify
Advanced
NE->RNC
Radio
Resource
Control
Configuration
Managementin
MultiMode
>UltranCell- System>Signal
User Number
>UltranCellXXXLow
Threshold
View->Configuration
>Modify Advanced
Management->RNC
NE->RNC
Radio
Control Configuration
Resource
in MultiMode SystemManagement>Signal User Number
>UltranCellMiddle Threshold
View->Configuration
>Model ParametersNE->RNC
Radio
>Mobility Configuration
Resource
Scene
View->Configuration
>UltranCellNE->RNC
Radio
>Model ParametersManagement->Modify
>Cell Radius Scene
>UE Intra-frequency
Management->RNC
NE->RNC
Radio
to Traffic Category
Resource
Configuration
Management->Modify
Information->Mobility
Advanced
Scene
>UE Inter-frequency
to Traffic Category>Mobility Configuration
Scene
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced Parameter>UE Inter-RAT
View->Configuration
Management->RNC
to Traffic CategoryNE->RNC
Radio
>Mobility Configuration
Resource
Scene
Management>External
>External
Eutran Cell
Management->RNC
XXX
NE->RNC Radio
Resource
Management>External
>External
Eutran Cell
Management->RNC
XXX
NE->RNC Radio
Resource
>External Eutran CellManagement->RNC
NE->RNC
Radio
XXX
Resource
View->Configuration
Management->Modify
Management->RNC
Advanced
>RNC Radio Resource
Resource
Management->RNC
Management->Modify
Identity
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management->InterResource
Frequency Balance
ManagementSwitch Based on
>UltranCellMeasurement with
View->Configuration
>UltranCellXXXOverlapping or
Management->RNC
>Modify
CoveringAdvanced
Relation
NE->RNC
Radio
>User Number with
Management->Modify
Compressed Mode
Advanced
ParameterActivation for
Balance
View->Configuration
>RNC
Radio
Resource
Strategy
Based
On
Management->RNC
Management->Timer
Measurement
NE->RNC
Radio
of Deactivate
Resource
Compressed Mode for
ManagementBalance Strategy
>UltranCellBased On
View->Configuration
>UltranCellXXXMeasurement
Management->RNC
>Modify
Advanced
NE->RNC
Radio
>Cpich
Ec/N0
ManagementThreshold for Blind
>UltranCellHandover
>Modify Advanced
Management->RNC
Radio
>Cpich RSCP
Resource
Threshold for Blind
ManagementHandover
>UltranCell>UltranCellXXX->Cell
and Priority
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
Management->RNC
Frequency
Reselection
NE->RNC Radio
and
Priority
Resource
NE->RNC
FrequencyRadio
Reselection
Resource
and Priority
Management->Modify
Advanced
>CN
System
Management->RNC
InformationNE->RNC
Radio
View->Configuration
>Modification
Period
Resource
Management->RNC
Coefficient for MBMS
Management->Modify
NE->RNC Radio
Advanced
Resource Parameter>Power
Control
Management->Logical
Related
to Service
and
RNC
Associated
With
View->Configuration
Diversity
Mode->SubPLMN Configuration
Management->RNC
service Type
NE->RNC Radio
RNC
XXX->Modify
Resource
Advanced
>Dynamic
Radio With
View->Configuration
RNC Associated
Bearer
Controll
Management->RNC
PLMN Configuration
Information->Event
NE->RNC
Radio 4A
Counter
Threshold for
Resource
RNC XXX->Modify
E-TTI
Switching
from
Management->Logical
Advanced
Parameter10ms
to
2ms
RNC
Associated
>Dynamic Radio With
PLMN
Controll
RNC
XXX->Modify
Counter
Threshold for
Advanced
ParameterE-TTI
Switching
from
View->Configuration
>Dynamic
Radio
2ms to 10ms
Management->RNC
Bearer
Controll
NE->RNC
Radio
Information->Switch
of
Resource
E-TTI
Switching
Management->Modify
Triggered
by
User
Advanced
Plane Throughput
>HSPA
Configuration
Management->RNC
Measurement
Information->DTX/DRX
NE->RNC Radio
Switch
Resource
Management->Modify
Management->HARQ
RV Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Cell Identity, can

not be modified.
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
Advanced
>HSPA Configuration
NE->RNC
Radio
Information->HSResource
SCCH
Less Switch
Management->Modify
Advanced Parameter>RNC
Radio Resource
View->Configuration
>Maximum
Bit Rate
NE->RNC Radio
with
HS-SCCH
Less
Resource
for
Non-VoIP/AMR
Management->Modify
View->Configuration
>HSPA Configuration
NE->RNC
Radio
Information->DTX/DRX
Resource
Switch for NRT
Management->Modify
>HSPA Configuration
Management->RNC
Information->HSNE->RNC
SCCH LessRadio
Switch for
View->Configuration
Resource
Non-VoIP/AMR
Management->RNC
Management->Modify
NE->RNC
Radio
>HSPA Configuration
ManagementInformation->DTX/DRX
View->Configuration
>UltranCellSwitch for Speech
Management->RNC
>Modify
Advanced
Resource
Parameter->Load
ManagementControl
Information>UltranCell>Switch
for Shielding
>UltranCellXXXGBR Reduction
>Modify
Advanced
Shared
by Uplink and
Parameter->Load
View->Configuration
Downlink
Control
>Maximum
Number of
NE->RNC Radio
Services
Whose
GBR
Resource
Can Be Decreased in
Management->Modify
Load
Control
Every
Advanced
Time
Shared
by
Uplink
>MBMS
and
Downlink
>MBMS
Iub
Transport
NE->RNC
Radio
Bearer
Multiplex
Resource
Switch
Management->MBMS
View->Configuration
Configuration->The
Management->RNC
Minimum Rate
NE->RNC
Threshold Radio
of the
Resource
SCCPCH Setup for
Management->Modify
MBMS
Advanced Parameter>MBMS ConfigurationView->Configuration
>Waiting Time for RRC
Management->RNC
CONNECTION SETUP
NE->RNC
RadioMBMS
Message When
Resource
is Used(T318)
Identity
View->Configuration
Management->RNC
NE->RNC Radio
PICH Channel
Resource
Identity, usually
Managementshould not be
View->Configuration
>UltranCellmodified otherwise Management->RNC
>UltranCellXXXcell will be deleted NE->RNC Radio
>Modify Advanced
and reestablished. Resource
Parameter->PICHThe related
Management>PICH Common
common transport >UltranCellPhysical Channel ID
View->Configuration
channel will be
reconfigured.
>Modify Advanced
NE->RNC
Radio
Parameter->PICHResource
>Number of Paging
ManagementIndicators per PICH
N/A
>UltranCellFrame
View->Configuration
>Modify Advanced
NE->RNC
Radio
>Cell
Uplink 16QAM
ManagementSupport
Indicator
N/A
>Modify Advanced
Management->RNC
>Cell
Uplink 16QAM
Resource
Support
Indicator
N/A
Management->Modify
Advanced
>UE DTX/DRX
Management->RNC
Configuration->CQI
NE->RNC Radio
DTX
Timer
Resource
N/A
Management->Modify
Advanced
>UE DTX/DRX
Management->RNC
Configuration->UE
NE->RNC Radio
DPCCH
ResourceBurst_1
N/A
Management->Modify
View->Configuration
>UE DTX/DRX
NE->RNC
Radio
Configuration->UE
Resource
DPCCH Burst_2
Management->Modify
N/A
>UE DTX/DRX
Management->RNC
Radio
>Inactivity Threshold
Resource
for UE DRX Cycle
N/A
Management->Modify
Advanced
>UE
DTX/DRX
Management->RNC
Configuration->UE
NE->RNC Radio
DRX
Cycle
Resource
N/A
Management->Modify
View->Configuration
>UE DTX/DRX
NE->RNC
Radio
Configuration->UE
Resource
DRX Grant Monitoring
Management->Modify
N/A
Advanced Parameter>UE DTX/DRX
Configuration->UE
DTX Cycle 1 for 10ms
TTI
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>UE DTX/DRX
NE->RNC
Radio
Configuration->UE
Resource
DTX Cycle 1 for 2ms
Management->Modify
TTI
Advanced
>UE
DTX/DRX
Management->RNC
Radio
>Inactivity
Resource Threshold
for
UE DTX Cycle 2 for
Management->Modify
10ms
TTI ParameterAdvanced
View->Configuration
>UE DTX/DRX
Management->RNC
Radio
Resource
for UE DTX Cycle 2 for
Management->Modify
2ms TTI
Advanced
>UE
DTX/DRX
Management->RNC
Configuration->UE
NE->RNC Radio
DTX
Cycle 2 for 10ms
Resource
TTI
Management->Modify
Advanced
>UE
DTX/DRX
Management->RNC
Configuration->UE
NE->RNC Radio
DTX
Cycle 2 for 2ms
Resource
TTI
Management->Modify
Advanced
>UE
DTX/DRX
Management->RNC
Configuration->UE
NE->RNC Radio
DTX/DRX
Resource
Configuration Index
Management->Modify
View->Configuration
>UE DTX/DRX
NE->RNC
Radio
Configuration->UE
Resource
DTX Long Preamble
Management->Modify
Length
>UE DTX/DRX
Management->RNC
Radio
Resource
for UE Grant
Management->Modify
Monitoring
>UE DTX/DRX
Management->RNC
Configuration->MAC
NE->RNC
DTX CycleRadio
for 10ms
Resource
TTI
Management->Modify
Advanced
>UE
DTX/DRX
Management->RNC
Configuration->MAC
NE->RNC Radio
DTX
Cycle for 2ms TTI
Resource
Management->Modify
Advanced Parameter>UE DTX/DRX
Configuration->MAC
Inactivity Threshold
N/A
N/A
N/A
N/A
N/A
SCCPCH channel
identity, usually
should not be
modified. If it is
modified, related
SCCPCH channel
will be deleted and
The
setupRelated
again.
common transport
channel will be
deleted and setup
again .
The Related
common transport
channel will be
deleted and setup
again .
N/A
The Related
common transport
channel will be
deleted and setup
again .
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Logical
RNC Associated With
PLMN Configuration
Information XXX>Modify
Advanced
View->Configuration
Parameter->RNC
Management->RNC
Configuration
Related
NE->RNC Radio
to
PLMN->Lower
Limit
View->Configuration
Resource
of GBR for Downlink
Management->RNC
Management->Modify
Services
for QoS
NE->RNC
Radio
AdvancedUsed
ParameterNegotiation/Renegotiat
Resource
>RNC Radio Resource
ion
Management->Logical
Management->UTRAN
RNC
Associated
With
DRX Cycle
Length
View->Configuration
PLMN
Configuration
Coefficient
Management->RNC
Information
XXXNE->RNC Radio
>Modify
Advanced
Resource
Parameter->RNC
Management->Logical
Configuration
Related
View->Configuration
RNC Associated
With
to
PLMN->Negotiated
Management->RNC
PLMN Configuration
GBR
LevelRadio
Number
NE->RNC
Information
XXXShared
by
Uplink
and
Resource
>Logical RNC
Downlink
Management->Logical
RNC
Associated With
Configuration
PLMN
Configuration for
Information->Switch
Information
XXXQoS
View->Configuration
>Modify
Advanced
Negotiation/Renegotiat
Management->RNC
Parameter->RNC
ion
NE->RNC
Radio
Configuration
Related
Resource
to PLMN->Lower Limit
Managementof GBR for Uplink
View->Configuration
>UltranCellServices Used for QoS
Management->RNC
>UltranCellXXXNegotiation/Renegotiat
NE->RNC
Radio
>Modify
Advanced
ion
Resource
Parameter->SCCPCHManagement>S-CCPCH Common
>UltranCellPhysical Channel ID
>Modify
Advanced
Management->RNC
Parameter->SCCPCHNE->RNC Radio
>Frame
Timing Offset
Resource
Between SCCPCH and
ManagementPCCPCH
View->Configuration
Radio
>Modify Advanced
Resource
Parameter->SCCPCHManagement>SCCPCH Usage
>Modify
Advanced
NE->RNC
Radio
Parameter->SCCPCHResource
>Broadcast
in either
ManagementSIB5
or
SIB6
>Modify
Advanced
Management->RNC
Parameter->SCCPCHNE->RNC Radio
>S-CCPCH
Resource STTD
Indicator
Management->Modify
Advanced Parameter>Service Basic
Configuration
Information->Direction
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Physical shared
channel
be triggered and
SIB5/5bis will
change.
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Information->CN
Resource
Domain Indicator
Management->Modify
Advanced
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Resource
Bit Rate
Management->Modify
Advanced
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Information->MBMS
Resource
Indicator
Management->Modify
Advanced
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Information->SubResource
Service
Management->Modify
Advanced
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Information->Traffic
Resource
Class
Management->RNC
Setup
ParametersNE->RNC
Radio
>Cell
64QAM
Support
Resource
Indicator
NE->RNC
Radio
>Cell HSUPA 2ms TTI
ManagementSupport Indicator
>Modify Advanced
NE->RNC
Radio
Parameter->PICH->SResource
CCPCH Common
Management->Modify
Physical Channel ID
View->Configuration
>Service Basic
NE->RNC
Radio
Configuration
Resource
Information->Minimum
Management->Modify
Bit Rate
View->Configuration
>Common E-DCH
NE->RNC
Radio
Transmission
Time
Resource
Interval
Management->Modify
Management
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
Physical shared
channel
be triggered and
SIB5/5bis will
change.
N/A
Related RACH will

be deleted and
setup again.
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
Radio
>RNC Radio
Resource
Resource
Management
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
ManagementResource
>Common E-DCH
Management->Modify
MAC-d Flow
View->Configuration
Advanced
ParameterMultiplexing
Switch
Management->RNC
>RNC Radio Resource
NE->RNC
Radio
ManagementResource
>Spreading Factor
ManagementSupported by Uplink
>UltranCellEnhanced
>UltranCellXXXCELL_FACH
View->Configuration
>Modify
Advanced
Management->RNC
Parameter->EFACH
NE->RNC Radio
Configuration->Allowed
Resource
UL
Common MAC
Management->Modify
Flow
Transport
Advanced
Bandwidth
for the Cell
>Service
Basic
Management->RNC
Configuration
NE->RNC Radio
Information->UE
Resource
DTX/DRX
>UltranCell- Index
Parameter->Prach>RACH Common
Transport Channel ID
Related RACH will

be deleted and
setup again.
N/A
Related RACH will

be deleted and
setup again.
It will be changed
that the maximum
number of UE in a
cell whose
transport resource
will be released
while transport path
is overload.
N/A
It will change the

occupied bandwidth
of a CCH and some
ue calls maybe
released if the
factor change make
a bandwidth
overload
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
>Modify Advanced
NE->RNC
Radio
>RACH TTI
NE->RNC
Radio
XXX->Sixteen
QAM UL
Resource
Support Indicator
Radio
>Model ParametersResource
>SCCPCH
View->Configuration
Management->Modify
Configuration Scene
Management->RNC
Advanced
>RNC
Radio Resource
Resource
Management->the
ManagementRelease
UE Number
>UltranCellwhen
Band
Exceeds
>UltranCellXXXLimit
View->Configuration
>Modify Advanced
Management->RNC
Parameter->UE
NE->RNC
Radio
Measurement
Resource
Configuration In
ManagementSystem Information
>UltranCellBlock->UE Traffic
View->Configuration
>UltranCellXXXVolume Measurement
Management->RNC
>Modify
Advanced
Configuration
Index
NE->RNC
Radio
>Common Transfer
Management->Modify
Bandwidth Discount
Advanced
ParameterFactor for Channel
>RNC
Radio
Resource
View->Configuration
Management->GBR of
Management->RNC
AMR
Service
Whether
NE->RNC
Radio
to
be
Reserved
Resource
Indicator
Management>External
>External
UTRAN Cell
Management->RNC
XXX->Classified
NE->RNC Radio Zone
Indicator
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
Information->NODEB
XXX->Node B Port
Configuration
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node
B Port
NE->RNC Radio
Configuration
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Node B Port
NE->RNC
Radio
Configuration
Resource
>External
Eutran CellManagement->RNC
>External
NE->RNC Eutran
Radio Cell
XXX->Eutran
Cell Type
Resource
Management->Modify
Advanced
>IDNNS
Route
Management->RNC
Configuration
NE->RNC Radio
Information->Start
Resource
Value of IDNNS
Management->Modify
Advanced Parameter>IDNNS Route
Configuration
Information->End
Value of IDNNS
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management->The
NE->RNC Radio
Routing
Select Type
Resource
for UE-Based
Management->Modify
Advanced
>IMSI
Route
Management->RNC
Configuration
NE->RNC Radio
Information->The
Imsi
Resource
Mask Flag
Management->Modify
Advanced
>IMSI
Route
Management->RNC
Configuration
NE->RNC Radio
Information->The
Imsi
View->Configuration
Resource
Matched Digit
Management->RNC
Management->Modify
NE->RNC
Radio
>IMSI Route
Management->Logical
Configuration
RNC
Associated with
Information->The
Rule
PLMN
Configuration
NO of IMSI-MAP
Information
xxxView->Configuration
>Logical
RNC
Management->RNC
AssociatedRadio
with PLMN
NE->RNC
Configuration
Resource
Information->Switch
of
Management->Modify
Permit
PS
handover
Advanced
from
LTE
to UTRAN
>IMSI
Route
Management->RNC
because
of CSFB
Configuration
NE->RNC
Radio
Information->Resource
Resource
Pool
Identifier in CS
Management->Modify
Domain
Advanced
>IMSI
Route
Management->RNC
Configuration
NE->RNC
Radio
Resource
Pool
Identifier in PS
Management->Modify
Domain
Advanced
>IDNNS
Route
Management->RNC
Configuration
NE->RNC Radio
Resource
Pool
Identifier in CS
Management->Modify
Domain
Advanced Parameter>IDNNS
Route
View->Configuration
Configuration
Management->RNC
NE->RNC Radio
Pool
Identifier in PS
Resource
Domain
>Modify Advanced
NE->RNC
Radio
Resource
Management->Modify
Management
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Related to Service for
White List
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
White List
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power
Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
White List
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Call drop and call

setup failed
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
Management->Modify
Related
to Service for
View->Configuration
White
List
Management->RNC
NE->User
Configuration in White
List
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
List
N/A
N/A
Call drop and call

setup failed
N/A
N/A
Call drop and call

setup failed
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->User
List
View->Configuration
Management->RNC
NE->User
View->Configuration
List
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>Traffic-Related
Power
Management->RNC
Control
NE->RNC Radio
Resource
Management->Modify
View->Configuration
Advanced
>RNC
Radio
Resource
NE->RNC Radio
Management
Resource
>Modify
Advanced
Management->RNC
Parameter->Balance
NE->RNC Radio
Information
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Management
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
NE->RNC
Radio
Control
Resource
Management->Modify
Advanced
>Power Control
Management->RNC
Related
to Radio
Service for
NE->RNC
White
List
Resource
>Modify
Advanced
NE->RNC
Radio
Resource
>Modify Advanced
NE->RNC
Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
View->Configuration
Management->Modify
Management->RNC
Advanced
>RNC
Radio Resource
Resource
Management
Management->Logical
RNC
Associated with
View->Configuration
PLMN
Configuration
Management->RNC
Information
xxxNE->RNC Radio
>Logical
RNC
Resource
Associated
with PLMN
Management->Logical
Configuration
RNC
Associated with
Information
PLMN Configuration
Information
xxxView->Configuration
>Logical
RNC
Management->RNC
Associated
with PLMN
NE->RNC Radio
Configuration
Resource
Information
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Management
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Management
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management
Resource
Management->Modify
View->Configuration
>UE Traffic
NE->RNC
Radio
Measurement
Resource
Configuration
>Modify
Advanced
NE->RNC
Radio
Parameter->Balance
Resource
Information
>Modify
Advanced
Management->RNC
Parameter->Balance
NE->RNC Radio
Information
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
Management
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
View->Configuration
Management->RNC
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management
Resource
>Modify
Advanced
NE->RNC
Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Resource
>Modify
Advanced
NE->RNC
Radio
Resource
>Modify Advanced
NE->RNC
Radio
Resource
Management->Modify
Advanced
>RNC
Radio
Resource
Management->RNC
Management
NE->RNC Radio
Resource
Management->Modify
View->Configuration
>RNC Radio Resource
NE->RNC
Radio
Management
Resource
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Modify
NE->RNC Radio
Advanced
Resource Parameter
Management->NodeB
Configuration
View->Configuration
Information->NODEB
Management->RNC
XXX->Modify
NE->RNC
Radio
Advanced Parameter
Resource
Management->Modify
Management
ZTE
AppPriIndex
1
Direction
1: Downlink
0: Uplink
0: DCH
RateSeg
1
2
3
4
5
1
2
3
4
1
4
3
2
1
0
3
2
1
0
2
5
4
3
2
1
4
3
2
1
3
6
5
4
3
2
5
4
3
2
4
7
6
5
4
3
6
5
4
3
5
8
7
6
5
4
7
6
5
4
1
5
4
3
2
1
4
3
2
1
BearerType
1: HSPA
BPSeg
2
3
4
6
7
8
5
6
7
4
5
6
3
4
5
2
3
4
5
6
7
4
5
6
3
4
5
2
3
4
2: MBMS
5
9
8
7
6
5
8
7
6
5
1
11
11
11
10
10
-
2
12
12
12
11
11
-
AppPriIndex
2
Direction
1: Downlink
0: Uplink
0: DCH
RateSeg
1
2
3
4
5
1
2
3
4
1
4
3
2
1
0
3
2
1
0
2
5
4
3
2
1
4
3
2
1
3
6
5
4
3
2
5
4
3
2
4
7
6
5
4
3
6
5
4
3
5
8
7
6
5
4
7
6
5
4
1
5
4
3
2
1
4
3
2
1
BearerType
1: HSPA
BPSeg
2
3
4
6
7
8
5
6
7
4
5
6
3
4
5
2
3
4
5
6
7
4
5
6
3
4
5
2
3
4
<>
2: MBMS
5
9
8
7
6
5
8
7
6
5
1
11
11
11
10
10
-
2
12
12
12
11
11
-
1106 , 879
ZTE
2: MBMS
3
13
13
13
12
12
-
4
14
14
14
13
13
-
5
15
15
15
14
14
-
4
14
14
14
13
13
-
5
15
15
15
14
14
-
2: MBMS
3
13
13
13
12
12
-
<>
1106 , 880
ZTE
Traffic Class
ARPSeg
1
2
0: Voice
14
13
1: Video
14
13
2: Streaming
10
10
3: Background
7
4
12
12
10
<>
1106 , 881
ZTE
Traffic Class
4: Interative(THP=1)
9
6
8
5
7
4
19: Session Initiation Protocol

15
15
15
<>
1106 , 882
ZTE
Parameter Name
SceneIdLoadSce
TemplateId
ne
BPriAcIndex
0~255
Range and Step
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
N/A
N/A
<>
1106 , 883
ZTE
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
Default Value
<>
1106 , 884
ZTE
BasicPrio
DchUlAcThresh
DchDlAcThresh
EdchAcThresh
0.. 62dB, step

0.1
1.. 100%
0.. 62dB,step
0.1
1.. 100%
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
59.0
85.0
60.0
90.0
60.0
85.0
61.5
90.0
10
60.0
85.0
61.5
90.0
11
60.0
85.0
61.5
90.0
12
60.0
85.0
61.5
90.0
13
60.0
85.0
61.5
90.0
14
60.0
85.0
61.5
90.0
15
60.50
85.0
62.0
90.0
16
60.50
90.0
62.0
92.0
59.0
90
60.0
92
59.0
90
60.0
92
59.0
90
60.0
92
(0...16)
BasicPrio: 0~15
16: handover
<>
HsdpaAcThresh
1106 , 885
ZTE
59.0
90
60.0
92
59.0
90
60.0
92
59.0
90
60.0
92
59.0
90
60.0
92
59.0
90
60.0
92
59.0
90
60.0
92
60.0
90
61.5
92
10
60.0
90
61.5
92
11
60.0
90
61.5
92
12
60.0
90
61.5
92
13
60.0
90
61.5
92
14
60.0
90
61.5
92
15
60.5
90
62.0
92
16
60.5
90
62.0
92
<>
1106 , 886
ZTE
ThreshRefCount
CodeTreeResRto
SafePwrOfst
1.. 100%
1.. 100%
0.. 100%
1.. 100%
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
70
65
10
75
70
10
65
60
10
65
60
10
65
60
10
MbmsAcThresh
<>
1106 , 887
ZTE
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
65
60
10
75
70
10
75
70
10
<>
1106 , 888
ZTE
SchPriIndex
1
BearerType
BasicPrio
10
10
11
10
10
11
12
11
10
11
12
12
11
12
13
13
12
13
14
14
13
14
15
15
14
15
15
<>
1106 , 889
ZTE
Parameter
Name
Range and
Step
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
SceneId(L
DivPcInde TxDivMod
SrvType
TemplateId
oadScene)
x
0~65535 0: None
0~65534
1: STTD
2: Closed Loop
N/A
N/A
Mode 1
0
0
0
0
1
1
0
0
9
11
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
81
83
85
91
93
95
<>
1106 , 890
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
101
103
105
141
143
145
147
149
151
153
155
157
159
161
163
165
167
171
173
175
177
179
181
183
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
<>
1106 , 891
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
113
115
117
119
121
123
125
127
129
131
133
135
137
139
15
17
19
79
87
89
107
109
111
199
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
285
287
289
291
293
295
297
<>
1106 , 892
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
1
1
0
0
8
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
20
22
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
<>
1106 , 893
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
172
174
176
178
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
160
190
220
0
0
0
0
1
1
1
1
9
11
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
<>
1106 , 894
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
61
63
65
67
69
71
73
75
77
81
83
85
91
93
95
101
103
105
141
143
145
147
149
151
153
155
157
159
161
163
165
167
171
173
175
177
179
181
183
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
<>
1106 , 895
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
113
115
117
119
121
123
125
127
129
131
133
135
137
139
15
17
19
79
87
89
107
109
111
199
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
<>
1106 , 896
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
277
279
281
283
285
287
289
291
293
295
297
0
0
0
0
1
1
1
1
8
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
20
22
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
<>
1106 , 897
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
172
174
176
178
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
160
190
220
1
1
0
0
2
2
0
0
9
11
1
1
1
1
1
0
0
0
0
0
2
2
2
2
2
0
0
0
0
0
21
23
25
27
29
<>
1106 , 898
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
81
83
85
91
93
95
101
103
105
141
143
145
147
149
151
153
155
157
159
161
163
165
167
171
173
175
177
179
181
183
<>
1106 , 899
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
113
115
117
119
121
123
125
127
129
131
133
135
137
139
15
17
19
79
87
89
107
109
111
199
<>
1106 , 900
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
285
287
289
291
293
295
297
1
1
0
0
2
2
0
0
8
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
20
22
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
<>
1106 , 901
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
172
174
176
178
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
160
190
220
<>
1106 , 902
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
0
0
2
2
1
1
9
11
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
81
83
85
91
93
95
101
103
105
141
143
145
147
149
151
<>
1106 , 903
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
153
155
157
159
161
163
165
167
171
173
175
177
179
181
183
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
113
115
117
119
121
123
125
127
129
<>
1106 , 904
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
131
133
135
137
139
15
17
19
79
87
89
107
109
111
199
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
285
287
289
291
293
295
297
1
1
0
0
2
2
1
1
8
10
1
1
1
0
0
0
2
2
2
1
1
1
20
22
24
<>
1106 , 905
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
172
174
176
178
180
182
184
186
188
<>
1106 , 906
ZTE
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
200
202
204
206
208
210
212
214
216
218
160
190
220
<>
1106 , 907
ZTE
Traffic Class
N/A
Conversational(no
meaning for this service)
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Maximum Bit Rate
MaxDlDpc
hPwr
(-35..15 )
dB step
0.1 Db
MinDlDpch
Pwr
(-35..15 )
dB step
0.1 Db
DL 3.4kbps Signaling(AM)
-13
-13
DL 1.5kbps sub-service used
by F-DPCH
-13
-15
DL WAMR 6.60~23.85kbps
DL 64kbps (PS
Conversational Video)
DL PS 38.8kbps
DL PS 30.8kbps
DL PS 16.8kbps
DL NAMR 4.75~12.2kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL CS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
0
0
-13
-15
0
0
3
3
3
-1
-1
-3
0
1
1
4
2
-4
1
1
4
2
-4
1
1
4
2
-4
-7
-6
-4
3
-4
-7
-6
-4
3
-8
3
-4
-8
3
-4
-10
-15
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-10
-15
-15
-10
-15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
2
0
2
3
3
2
0
2
3
3
2
0
2
3
3
3
3
3
3
3
3
3
3
3
0
3
3
0
3
N/A
<>
DpchPO1
DpchPO2
(0..6) dB
step 0.25
dB
(0..6) dB
step 0.25
dB
1106 , 908
ZTE
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
-8
3
-4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-15
-10
-15
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
0
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 909
ZTE
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
UL 3.4kbps Signaling(AM)
-35
-35
-35
-35
<>
1106 , 910
ZTE
Conversational(no
meaning for this service) UL 13.6kbps Signaling(AM)
Conversational(no
meaning for this service) UL 6.8kbps Signaling(AM)
Conversational
UL AMR 6.60~23.85kbps
UL 64kbps (PS
Conversational
Conversational
UL PS 38.8kbps
Conversational
UL PS 30.8kbps
Conversational
UL NAMR4.75~12.2kbps
Streaming
UL PS 64kbps
Streaming
UL PS 144kbps
Streaming
UL PS 384kbps
Streaming
UL PS128kbps
Streaming
UL PS 32kbps
Interactive
UL PS 64kbps
Interactive
UL PS 144kbps
Interactive
UL PS 384kbps
Interactive
UL PS128kbps
Interactive
UL PS 32kbps
Background
UL PS 64kbps
Background
UL PS 144kbps
Background
UL PS 384kbps
Background
UL PS128kbps
Background
UL PS 32kbps
Conversational
UL CS 14.4kbps
Conversational
UL CS 28.8kbps
Conversational
UL CS 57.6kbps
Conversational
UL CS 64kbps
Conversational
UL CS 32kbps
Streaming
UL CS 14.4kbps
Streaming
UL CS 28.8kbps
Streaming
UL CS 57.6kbps
Streaming
UL CS 64kbps
Streaming
UL PS 8kbps
Streaming
UL PS 256kbps
Streaming
UL PS 16kbps
Interactive
UL PS 8kbps
Interactive
UL PS 256kbps
Interactive
UL PS 16kbps
Background
UL PS 8kbps
Background
UL PS 256kbps
Background
UL PS 16kbps
Interactive
UL PS 512kbps
Interactive
UL PS 711kbps
Interactive
UL PS 1024kbps
Interactive
UL PS 1.399Mbps
Interactive
UL PS 1.448Mbps
Interactive
UL PS 2.048Mbps
Interactive
UL PS 2.886Mbps
Interactive
UL PS 3. 072Mbps
Interactive
UL PS 4.096Mbps
Interactive
UL PS 5.76Mbps
Background
UL PS 512kbps
-35
-35
-35
-35
-35
-35
0
0
0
0
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
<>
1106 , 911
ZTE
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-13
-13
by F-DPCH
-13
-15
DL 64kbps (PS
DL PS 38.8kbps
DL PS 30.8kbps
DL PS 16.8kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
0
0
-13
-15
0
0
3
3
3
-1
-1
-3
0
1
1
4
2
-4
1
1
4
2
-4
1
1
4
2
-4
-10
-15
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
2
0
2
3
3
2
0
2
3
3
2
0
2
3
<>
1106 , 912
ZTE
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL CS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
-7
-6
-4
3
-4
-7
-6
-4
3
-8
3
-4
-8
3
-4
-8
3
-4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-10
-15
-15
-10
-15
-15
-10
-15
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
0
3
3
0
3
3
0
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 913
ZTE
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 914
ZTE
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
4
4
4
4
4
4
4
4
4
4
4
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-35
-35
-35
-35
-35
-35
UL 64kbps (PS
UL PS 38.8kbps
UL PS 30.8kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
-35
-35
-35
-35
0
0
0
0
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
<>
1106 , 915
ZTE
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Conversational
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-15
-13
by F-DPCH
-15
DL 64kbps (PS
DL PS 38.8kbps
DL PS 30.8kbps
DL PS 16.8kbps
0
0
0
0
3
3
0
0
0
0
0
3
3
3
3
3
3
-1
-1
-3
0
-15
-13
-15
-10
-15
-15
-15
-15
<>
1106 , 916
ZTE
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL CS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
1
1
4
2
-4
1
1
4
2
-4
1
1
4
2
-4
-7
-6
-4
3
-4
-7
-6
-4
3
-8
3
-4
-8
3
-4
-8
3
-4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-10
-15
-15
-10
-15
-15
-10
-15
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
2
0
2
3
3
2
0
2
3
3
2
0
2
3
3
3
3
3
3
3
3
3
3
3
0
3
3
0
3
3
0
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 917
ZTE
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
4
4
4
4
4
4
4
4
4
4
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 918
ZTE
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-35
-35
-35
-35
-35
-35
UL 64kbps (PS
UL PS 38.8kbps
UL PS 30.8kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
-35
-35
-35
-35
0
0
0
0
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
<>
1106 , 919
ZTE
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Conversational(no
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-15
<>
1106 , 920
ZTE
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
-13
by F-DPCH
-15
DL 64kbps (PS
DL PS 38.8kbps
DL PS 30.8kbps
DL PS 16.8kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL CS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
0
0
0
0
3
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
2
0
2
3
3
2
0
2
3
3
2
0
2
3
3
3
3
3
3
3
3
3
3
3
0
3
3
0
3
3
0
3
0
0
0
0
0
0
3
-1
-1
-3
0
1
1
4
2
-4
1
1
4
2
-4
1
1
4
2
-4
-7
-6
-4
3
-4
-7
-6
-4
3
-8
3
-4
-8
3
-4
-8
3
-4
4
4
4
4
4
4
-15
-13
-15
-10
-15
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-15
-15
-15
-15
-10
-15
-15
-15
-15
-10
-15
-10
-15
-15
-10
-15
-15
-10
-15
-10
-10
-10
-10
-10
-10
<>
1106 , 921
ZTE
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-35
-35
-35
-35
-35
-35
-35
-35
-35
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-35
-35
-35
-35
-35
-35
-35
-35
-35
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 922
ZTE
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Conversational(no
Conversational(no
Conversational(no
Conversational(no
Conversational
Conversational
Conversational
Conversational
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
-35
-35
-35
-35
-35
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-35
-35
-35
-35
-35
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-35
-35
-35
-35
-35
-35
UL 64kbps (PS
UL PS 38.8kbps
UL PS 30.8kbps
-35
-35
-35
-35
0
0
0
0
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
<>
1106 , 923
ZTE
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
<>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1106 , 924
ZTE
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Notes: The values in the blue cells are the invalid values
<>
1106 , 925
ZTE
DpchPO3
DpcchPilot
EbN0
(30..+30)dB
step 0.1dB
MaxUlDpc
hPwr
(50..33)dB
m step 1
-30
-50
-8.2
-8.2
-8.2
-30
-50
-8.2
-8.2
-30
-50
-8.2
-30
-50
0
0
-30
-30
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
(0..6) dB
step 0.25
dB
ULInitSIR
ULMaxSIR ULMinSIR EagchPOT

ti2
((((-32 ..
8.2..17.3)d 8.2..17.3)d 8.2..17.3)d +31.75 )dB
B step 0.1 B step 0.1 B step 0.1 step 0.25
dB
dB
dB
dB
EagchPOT
ti10
(-32 ..
+31.75 )dB
step 0.25
dB
ErgchPOTt
i2
(-32 ..
+31.75 )dB
step 0.25
dB
-2
-9
-8
-8.2
-2
-9
-8
-8.2
-8.2
-2
-9
-8
-8.2
-8.2
-8.2
-2
-9
-8
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-9
-9
-8
-8
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-11
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 926
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 927
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
33
15
33
15
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-32
-32
-32
-32
-32
-32
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
<>
1106 , 928
ZTE
33
15
-32
-32
-32
0
0
3
3
33
33
5
4
15
15
2
0.5
-32
-32
-32
-32
-32
-32
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
5
3
2
3
3
5
3
2
3
3
5
3
2
3
3
3
3
2
3
3
3
3
2
5
2
2
5
2
2
5
2
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
6
6
6
4
6
6
8
7
6
6
6
8
7
6
6
6
8
7
6
4
6
6
6
6
4
6
6
6
4
6
4
4
6
4
4
6
4
8
8
8
8
8
8
8
8
8
8
8
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
17.3
15
2
2
2
0.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0.5
2
2
2
2
0.5
2
2
2
0
2
0
0
2
0
0
2
0
4
4
4
4
4
4
4
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
1106 , 929
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
15
15
15
15
15
15
15
15
17.3
15
15
15
15
15
15
15
15
15
17.3
17.3
17.3
17.3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
0
0
-30
-30
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-9
-9
-8
-8
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-11
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 930
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 931
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 932
ZTE
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
33
15
-32
-32
-32
33
15
-32
-32
-32
33
15
-32
-32
-32
0
0
3
3
33
33
5
4
15
15
2
0.5
-32
-32
-32
-32
-32
-32
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
5
3
2
3
3
5
3
2
3
3
5
3
2
3
3
3
3
2
3
3
3
3
2
5
2
2
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
6
6
6
4
6
6
8
7
6
6
6
8
7
6
6
6
8
7
6
4
6
6
6
6
4
6
6
6
4
6
4
4
6
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
2
2
2
0.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0.5
2
2
2
2
0.5
2
2
2
0
2
0
0
2
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
1106 , 933
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
5
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
4
4
6
4
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
15
15
15
15
15
15
15
15
15
15
15
15
15
17.3
15
15
15
15
15
15
15
15
15
17.3
15
15
15
15
15
15
15
15
15
17.3
17.3
17.3
17.3
0
0
2
0
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
0
0
-30
-30
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-9
-9
-8
-8
0
0
0
0
0
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-8
-8
-8
-8
-11
<>
1106 , 934
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 935
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 936
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
33
1.5
3.5
-32
-32
-32
33
15
-32
-32
-32
33
1.5
3.5
-32
-32
-32
0
0
3
3
33
33
1.5
4
3.5
15
1
0.5
-32
-32
-32
-32
-32
-32
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
5
3
2
3
3
5
3
2
3
3
5
3
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
6
6
6
1.5
6
6
8
7
6
2
6
2
7
6
2
6
2
7
15
15
15
3.5
15
15
15
15
15
5
15
6
15
15
5
15
6
15
2
2
2
0
2
2
2
2
2
0
2
0
2
2
0
2
0
2
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
1106 , 937
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
3
3
3
3
2
3
3
3
3
2
5
2
2
5
2
2
5
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
6
4
6
6
6
6
4
6
6
6
4
6
4
4
6
2
4
6
2
8
8
8
8
8
4
8
8
8
8
8
8
8
8
8
4
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
5
15
15
5
15
15
15
15
15
8
15
15
15
17.3
15
15
15
15
15
8
15
15
15
17.3
15
15
15
15
15
15
15
15
15
17.3
17.3
17.3
17.3
2
0.5
2
2
2
2
0.5
2
2
2
0
2
0
0
2
0
0
2
0
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
<>
1106 , 938
ZTE
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
-30
-50
-8.2
-8.2
-8.2
-2
-9
-8
0
0
-30
-30
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-9
-9
-8
-8
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-11
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 939
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
<>
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
1106 , 940
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-30
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-50
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-8.2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-2
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-9
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
33
1.5
3.5
-32
-32
-32
33
15
-32
-32
-32
33
1.5
3.5
-32
-32
-32
0
0
3
3
33
33
1.5
4
3.5
15
1
0.5
-32
-32
-32
-32
-32
-32
0
0
0
3
3
3
33
33
33
6
6
6
15
15
15
2
2
2
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
1106 , 941
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
5
3
2
3
3
5
3
2
3
3
5
3
2
3
3
3
3
2
3
3
3
3
2
5
2
2
5
2
2
5
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
1.5
6
6
8
7
6
2
6
2
7
6
2
6
2
7
6
4
6
6
6
6
4
6
6
6
4
6
4
4
6
2
4
6
2
8
8
8
8
8
4
8
8
8
8
8
8
8
8
8
4
8
8
8
8
3.5
15
15
15
15
15
5
15
6
15
15
5
15
6
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
5
15
15
5
15
15
15
15
15
8
15
15
15
17.3
15
15
15
15
15
8
15
15
15
17.3
0
2
2
2
2
2
0
2
0
2
2
0
2
0
2
2
0.5
2
2
2
2
0.5
2
2
2
0
2
0
0
2
0
0
2
0
4
4
4
4
4
2
4
4
4
4
4
4
4
4
4
2
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
1106 , 942
ZTE
0
0
0
0
0
0
0
0
0
0
0
0
0
5
5
5
5
5
5
5
5
5
5
5
5
5
33
33
33
33
33
33
33
33
33
33
33
33
33
8
8
8
8
8
8
8
8
8
8
8
8
8
15
15
15
15
15
15
15
15
15
17.3
17.3
17.3
17.3
4
4
4
4
4
4
4
4
4
4
4
4
4
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
<>
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
1106 , 943
ZTE
ErgchPOTt
i10
(-32 ..
+31.75 )dB
step 0.25
dB
EhichPOTt
i2
(-32 ..
+31.75 )dB
step 0.25
dB
EhichPOTt
i10
(-32 ..
+31.75 )dB
step 0.25
dB
PwrForSgl PwrForHal
Cell
fIsd
((-8...0)dB
35...15)dB
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-13
-10
-10
-16
-16
-35
-35
-8
-8
-13
-13
-13
-13
-16
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-19
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 944
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 945
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
<>
1106 , 946
ZTE
-32
-32
-32
-35
-8
-32
-32
-32
-32
-32
-32
-35
-35
-8
-8
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 947
ZTE
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-13
-10
-10
-16
-16
-35
-35
-8
-8
-13
-13
-13
-13
-16
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-19
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 948
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 949
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 950
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-32
-32
-32
-35
-35
-8
-8
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 951
ZTE
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-13
-10
-10
-16
-16
-35
-35
-8
-8
-13
-13
-13
-13
-16
-10
-10
-10
-10
-13
-16
-16
-16
-16
-19
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
<>
1106 , 952
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 953
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-3
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 954
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-32
-32
-32
-35
-35
-8
-8
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 955
ZTE
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-13
-10
-16
-35
-8
<>
1106 , 956
ZTE
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-10
-16
-35
-8
-13
-13
-10
-10
-16
-16
-35
-35
-8
-8
-13
-13
-13
-13
-16
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-19
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 957
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
3
3
3
3
3
3
3
3
3
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-3
-3
-3
-3
-3
-3
-3
-3
-3
<>
1106 , 958
ZTE
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-10
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
3
3
3
3
3
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-3
-3
-3
-3
-3
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-35
-8
-32
-32
-32
-32
-32
-32
-35
-35
-8
-8
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-8
-8
-8
<>
1106 , 959
ZTE
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 960
ZTE
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-32
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-35
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
-8
<>
1106 , 961
ZTE
SceneId
TemplateId SrvType
UlSirTargU UlSirTargD MaxSirTar UlOlPcQE SwchAdap

pStep
nStep
gDnStep
SwchSil
tiveStep
Parameter
Name
0..65534
Range
and Step
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
N/A
(0.1..0.5)
dB step
0.1dB
N/A
(0.1..0.5)
dB step
0.1dB
0.1..1dB
0: Off
step 0.1dB 1: On
0: Off
1: On
0.3
0.1
0.6
0.1
0.1
0.1
0.3
0.1
0.6
0.1
0.1
0.1
0.1
0.1
0.1
10
0.3
0.1
0.6
11
0.1
0.1
0.1
28
0.3
0.1
0.6
29
0.1
0.1
0.1
66
0.3
0.1
0.6
67
0.1
0.1
0.1
150
0.3
0.2
0.6
180
0.3
0.2
0.6
210
0.3
0.2
0.6
158
0.3
0.2
0.6
188
0.3
0.2
0.6
218
0.3
0.2
0.6
151
0.1
0.1
0.1
181
0.1
0.1
0.1
211
0.1
0.1
0.1
231
0.1
0.1
0.1
<>
1106 , 962
ZTE
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
Dafault
Value
235
0.1
0.1
0.1
239
0.1
0.1
0.1
199
0.1
0.1
0.1
247
0.1
0.1
0.1
249
0.1
0.1
0.1
<>
1106 , 963
3.1622776
60168380
e-004
ZTE
MaxDlDpc MinDlDpch DpcchPilot MaxUlDpc ULInitSIR
hPwr
Pwr
EbN0
hPwr
(-35..15 )
dB step
0.1 Db
(-35..15 )
dB step
0.1 Db
-35
-35
-13
-35
-35
-13
-15
-35
-35
0
-35
0
-15
-35
-15
((30..+30)dB 50..33)dB
step 0.1dB m step 1
33
-30
-50
33
3.9810717
05534974
e-004
ULMaxSIR ULMinSIR BLERtarge ErrorThres
t
h
5.0118723
36272726
e-004
6.3095734
44801930 (1..50)TBs
(((8.2..17.3)d 8.2..17.3)d 8.2..17.3)d e-004
B step 0.1 B step 0.1 B step 0.1
7.9432823
dB
dB
dB
47242803
e-004
5
15
-8.2
-8.2
-8.2
15
-30
-50
-8.2
-8.2
-8.2
-30
-50
-8.2
-8.2
-8.2
33
15
0.5
-30
-50
-8.2
-8.2
-8.2
33
15
0.5
-30
-50
-8.2
-8.2
-8.2
33
15
-30
-50
-8.2
-8.2
-8.2
15
15
15
17.3
17.3
17.3
-35
-35
-10
-35
-35
33
-35
-35
33
-35
-35
33
-35
-35
33
-35
-35
33
-35
-35
33
-10
-30
-50
-8.2
-8.2
-8.2
-10
-30
-50
-8.2
-8.2
-8.2
-10
-30
-50
-8.2
-8.2
-8.2
-10
-30
-50
-8.2
-8.2
-8.2
<>
1.000000001
1.0000000
00000000
1.000000001
e-003
1.2589254
1.000000001
11794168e
-003
1.000000001
1.5848931
1.000000001
92461114e
-003
1.000000002
1.9952623
14968878
1.000000001
e-003
1.000000002
2.5118864
31509579
1.000000001
e-003
1.000000001
3.1622776
60168379
e-003
1.000000001
3.9810717
1.000000002
05534972
e-003
1.000000002
5.0118723
1.000000002
36272724
e-003
1.000000002
6.3095734
44801928
1.000000002
e-003
1.000000002
7.9432823
47242816
1.000000001
e-003
1.0000000
1.000000001
00000000
e-002
1.000000001
1.2589254
1.000000001
11794168e
-002
1.5848931
92461114e
-002
1106 , 964
1.9952623
14968880
ZTE
4
-10
-10
-10
-10
-10
-30
-50
-8.2
-8.2
-8.2
1.000000001
-30
-50
-8.2
-8.2
-8.2
1.000000001
-30
-50
-8.2
-8.2
-8.2
1.000000001
-30
-50
-8.2
-8.2
-8.2
1.000000001
-30
-50
-8.2
-8.2
-8.2
1.000000001
<>
1106 , 965
3.1622776
60168380
e-004
ZTE
3.9810717
05534974
e-004
BLERAccp ErrorThres BLERAccp BLERtarge
Period
hHLd
PerHLd
tHLd
5.0118723
36272726
e-004
ThrHarqFa
ilTti2[DBS
_RR_MAX
_NUM_ED
CHUSERL
EVEL]
ThrHarqFa
ilTti10[DB
S_RR_MA
X_NUM_E
DCHUSER
LEVEL]
NhrThrUp
Tti10[DBS
_RR_MAX
_NUM_ED
CHUSERL
EVEL]
0~255
0~15ste 0~15ste 0~15ste

p: 0.01
p: 0.01
p: 0.01
0
2,2,2
1.0000000
00000000
0
0,0,0
e-003
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
1.2589254
0
2,2,2
11794168e
-003
0
0,0,0
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
0
2,2,2
3.1622776
60168379
e-003
0
0,0,0
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
3.9810717
0
2,2,2
05534972
e-003
0
2,2,2
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0
7.9432823 2,2,2
47242816
0
0,0,0
e-003
2,2,2
0.03,0.03,0.0.01,0.01,0.0.03,0.3,0.6
0,0,0
0,0,0
0,0,0
0,0,0
1.0000000
0
0,0,0
00000000
e-002
0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
6.3095734
(1..65535) (1..50)TBs (1..65535) 44801930 0~255
e-004
TBs
TBs
NhrThrDo
wnTti10[D
BS_RR_M
AX_NUM_
EDCHUSE
RLEVEL]
NhrThrUp
Tti2[DBS_
RR_MAX_
NUM_EDC
HUSERLE
VEL]
7.9432823
47242803
e-004
200
200
250
70
250
70
300
250
250
250
250
250
250
1.5848931
0
0,0,0
92461114e
-003
0
2,2,2
1.9952623
14968878
1.000000000,0,0
e-003
0
2,2,2
2.5118864
31509579
1.000000000,0,0
e-003
5.0118723
0
36272724 2,2,2
e-003
0
2,2,2
6.3095734
44801928
0
2,2,2
e-003
1.2589254
0
11794168e 0,0,0
-002
1.5848931
92461114e
-002
<>
1.9952623
14968880
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
1106 , 966
ZTE
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
<>
1106 , 967
ZTE
NhrThrDo
wnTti2[DB
S_RR_MA
X_NUM_E
DCHUSER
LEVEL]
UpThrSam
pNuTti10[
DBS_RR_
MAX_NUM
_EDCHUS
ERLEVEL]
DwThrSa
mpNuTti10
[DBS_RR_
MAX_NUM
_EDCHUS
ERLEVEL]
UpThrSam
pNumTti2[
DBS_RR_
MAX_NUM
_EDCHUS
ERLEVEL]
0~15ste 0~255
p: 0.01
0~255
0~255
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0,0,0
0,0,0
0,0,0
0,0,0
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0,0,0
0,0,0
0,0,0
0,0,0
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
4.9
0,0,0
0,0,0
0,0,0
0,0,0
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
1.3
0,0,0
0,0,0
0,0,0
0,0,0
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0.01,0.1,0.44,4,4
32,16,16
4,4,4
32,16,16
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
DwThrSa QePhyBer QeCntThre

mpNumTti TarSil
s
2[DBS_RR
_MAX_NU
M_EDCHU
SERLEVE
L]
0~255
0..100%
1..20
Step: 0.1%
<>
EdchHarq MaxSirTar
POFdd[DB gUpStep
S_RR_MA
X_NUM_E
DCHUSER
LEVEL]
0~6
(0.1..1)dB
step 0.1dB
6,6,6
0.6
0,0,0
0.1
6,6,6
0.6
0,0,0
0.1
0,0,0
0.1
6,6,6
0.6
0,0,0
0.1
6,6,6
0.6
0,0,0
0.1
6,6,6
0.6
0,0,0
0.1
6,6,6
0.3
6,6,6
0.3
6,6,6
0.3
6,6,6
0.3
6,6,6
0.3
6,6,6
0.3
0,0,0
0.1
0,0,0
0.1
0,0,0
0.1
0,0,0
0.1
1106 , 968
ZTE
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
<>
0,0,0
0.1
0,0,0
0.1
0,0,0
0.1
0,0,0
0.1
0,0,0
0.1
1106 , 969
ZTE
BP
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MaxDlDpchPO (dB)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
<>
1106 , 970
ZTE
BP
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MaxUlDpchPO (dB)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
<>
1106 , 971
ZTE
Parameter Name
SceneId(LoadScen
TemplateId
e)
Range and Step
N/A
N/A
Dafault Value
Dafault Value
MaxNumUeOfDecR DecGbrSw
at
1100
0: Off
1: On
<>
1106 , 972
ZTE
MaxGbrDecNum
RequiredRDSwit
ForcedHOSwit
ForcedRABRelSwit ForceRABtoFASwit
1..50
0: Off
1: On
0: Off
1: On
0: Off
1: On
0: Off
1: On
<>
1106 , 973
ZTE
UlSeriousOverLd
UlOverLd
UlAlrmLd
UlHighLd
UlDecRateSw
(0.. 62)dB, step 0.1 (0.. 62)dB, step 0.1 (0.. 62)dB, step 0.1 (0.. 62)dB, step 0.1 0: Off
1: On
62
61
57
55
62
61
57
55
<>
1106 , 974
ZTE
UlForceHandoffSw UlDropSw
UlDnMaxStg
UlMaxForHoNum
UlMaxDrpUrNum
0: Off
1: On
0: Off
1: On
1~8
1~50
1~50
<>
1106 , 975
ZTE
DlSeriousOverLd
DlOverLd
DlAlrmLd
DlHighLd
DlDecRateSw
(1..100)%
(0..100)%
(0..100)%
(0..100)%
0: Off
1: On
100
95
85
70
100
95
90
70
<>
1106 , 976
ZTE
DlForceHandoffSw DlDropSw
DlDnMaxStg
DlMaxForHoNum
DlMaxDrpUrNum
0: Off
1: On
0: Off
1: On
1..8
1..50
1..50
<>
1106 , 977
ZTE
DlAdjustMFPSw
HsdsOverLdThr
HsdsRecoverThr
NodeBSafeThr
SwitchToFach
0: Off
1: On
(0100)%
(0100)%
(0100)%
0: Off
1: On
98
96
95
99
96
95
<>
1106 , 978
ZTE
NFach
AglLdDec
0~255
0: R99 Load
Decreasing
Algorithm
1:
1 HS Load
Decreasing
Algorithm
1
5
5
<>
1106 , 979
ZTE
NbCPrdRtwp
NbCPrdTcp
0~65535
0~65535
20
21
Parameter Name
SceneId(LoadSce
TemplateId
ne)
Range and Step
N/A
N/A
Dafault Value
Dafault Value
<>
1106 , 980
ZTE
NbCPrdTUGps
NbCModTUGps
NbCPrdHrp
NbCPrdNHTcp
NbCPrdRSEPS
0~65535
0~65535
0..65534, 0xffff
0xffff means invalid
value
4
0..65534, 0xffff
value
5
0..65534, 0xffff
value
6
22
23
24
25
26
<>
1106 , 981
Parameter
Name
Description
HoCelSelScen
e
Cell Radius Scene
TrfCatIntraMIdx Intra-frequency
Measurement
Configuration Index Related to
Traffic Category
TrfCategory
Service and Bearer Type Used for

Differentiating
Handover
Configuration
PrdMeasEcNo Period Report Configuration Index

for CPICH Ec/No
EvtMeasEcNo
UE Event Report Configuration

Index for CPICH Ec/No
PrdMeasRSCP Period Report Configuration Index

for CPICH RSCP
EvtMeasRSCP UE Event Report Configuration

Index for CPICH RSCP
EvtMeasDctEc Detected
Set
Measurement
No
Configuration Index for CPICH
Ec/No
EvtMeasDctRS Detected
Set
Measurement
CP
Configuration Index for CPICH
RSCP
DCH/UL
DCH
2: Single
NRT on
DL
DCH/UL
DCH
Range
3: Single default
and
Step
RAB
on value
DL HS0
0..3
DSCH/UL
DCH
4: Single
RAB
1
N/Aon
DL HSDSCH/UL
E-DCH
5: All MultiRAB on
0
DL
DCH/UL
DCH
6: MultiRAB,
0
N/A is
HSPA
Involved
and only
DCHs are
Used in
UL
2
N/A
7: MultiRAB,
HSPA is
Involved
and
5
N/AEDCH is
Used in
UL
8: Multi
Rab
7
N/A
Including
CS and
PS
0xff: The
parameter
isN/A
not
10
related
with
service
type
11
N/A
default
value
default
value
default
value
10
10
10
11
11
11
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
0xff
22
22
22
27
27
27
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
0xff
22
22
22
22
22
22
22
27
27
27
27
27
27
27
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
0xff
22
27
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
default
value
0xff
22
22
22
22
22
22
22
22
22
27
27
27
27
27
27
27
27
27
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
ZTE
Parameter
Name
Description
TrfCatInterMId Inter-frequency
x
Measurement
Configuration Index
Related to Traffic
Category
TrfCategory
Service and Bearer
Type
Used
for
Differentiating
Handover
Configuration
PrdMeasEcNo UE
Periodic
Measurement
Configuration Index
for CPICH Ec/No
EvtMeasEcNo UE Inter-frequency
Event Measurement
Configuration Index
for CPICH Ec/No
PrdMeasRSC
P
UE
Periodic
Measurement
Configuration Index
for CPICH RSCP
EvtMeasRSCP UE Inter-frequency
Event Measurement
Configuration Index
for CPICH RSCP
0: Single RT RAB
Including Voice on
DL DCH/UL DCH
1: Single RT RAB
Excluding Voice on
DL DCH/UL DCH default
2: Single
on value
Range
andNRT
Step
DL DCH/UL DCH
3: Single RAB on
DL HS-DSCH/UL
1
N/A
DCH
4: Single RAB on
DL HS-DSCH/UL
E-DCH
5: All Multi-RAB on
DL DCH/UL DCH
0
6: Multi-RAB,
HSPA is Involved
and only DCHs are
Used in UL
7: Multi-RAB,
0
N/A
HSPA is Involved
and E-DCH is
Used in UL
8: Multi Rab
Including CS and
3
N/A
PS
0xff: The
parameter is not
related with service
type
4
N/A
default
value
default
value
default
value
default
value
N/A
2
Event Measurement
Configuration Index
for
CPICH
Ec/No(GSM)
N/A
2
Event Measurement
Configuration Index
for
CPICH
RSCP(GSM)
N/A
3
Event Measurement
Configuration Index
for
CPICH
Ec/No(EUTRAN
FDD)
N/A
10
10
10
10
10
3
Event Measurement
Configuration Index
for
CPICH
RSCP(EUTRAN
FDD)
N/A
11
11
11
11
11
<>
1106 , 987
ZTE
default
value
default
value
default
value
default
value
default
value
0xff
10
10
10
10
11
11
11
11
<>
1106 , 988
ZTE
Parameter Name
Description
TrfCatRatMIdx
Inter-RAT
Measurement
Configuration
Index Related to
Traffic Category
Service
and
Bearer
Type
Used
for
Differentiating
Handover
Configuration
Periodical Report
Configuration
Index for Own
System CPICH
Ec/No
UE Event Report
Configuration
Index for Own
System CPICH
Ec/No
Periodical Report
Configuration
Index for Own
System CPICH
RSCP
UE Event Report
Configuration
Index for Own
System CPICH
RSCP
UE Event Report
Configuration
Index for Own
System CPICH
Ec/No(EUTRAN
FDD)
UE Event Report
Configuration
Index for Own
System CPICH
RSCP(EUTRAN
FDD)
TrfCategory
PrdMeasEcNo
EvtMeasEcNo
PrdMeasRSCP
EvtMeasRSCP
EvtMeasEcNo2
EvtMeasRSCP2
0: Single RT RAB
Including Voice on DL
default
DCH/UL DCH
Range
and
Step
value
1: Single RT RAB
Excluding Voice on DL
DCH/UL DCH
2: SingleN/A
NRT on DL
1
DCH/UL DCH
3: Single RAB on DL HSDSCH/UL DCH
4: Single RAB on DL HSDSCH/UL E-DCH
0
5: All Multi-RAB on DL
DCH/UL DCH
6: Multi-RAB, HSPA is
Involved and only DCHs
are Used in UL
0
N/A HSPA is
7: Multi-RAB,
Involved and E-DCH is
Used in UL
8: Multi Rab Including CS
and PS
0xff: The parameter
is not
2
N/A
related with service type
default
value
default
value
N/A
N/A
N/A
N/A
<>
1106 , 989
ZTE
default
value
default
value
default
value
default
value
default
value
default
value
default
value
0xff
<>
1106 , 990
ZTE
Sub-Service
0
1
2
3
4
5
7
8
9
10
11
15
MBMS Indicator
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
0: PTP MBMS Service
Non-MBMS Service
Traffic Class
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Conversational
or
Interactive
17
0: PTP MBMS Service or

Non-MBMS Service
Background
19

Non-MBMS Service
Streaming
20

Non-MBMS Service
Unknown Conversional
21

Non-MBMS Service
Unknown Conversional
22

Non-MBMS Service
Conversational
23

Non-MBMS Service
Conversational
24

Non-MBMS Service
Conversational
25

Non-MBMS Service
Conversational
27

Non-MBMS Service
Conversational
28

Non-MBMS Service
Conversational
29

Non-MBMS Service
Conversational
30

Non-MBMS Service
Streaming
31

Non-MBMS Service
Streaming
32

Non-MBMS Service
Streaming
33

Non-MBMS Service
Streaming
34

Non-MBMS Service
Streaming
35

Non-MBMS Service
Streaming
36

Non-MBMS Service
Streaming
37

Non-MBMS Service
Streaming
<>
1106 , 991
ZTE
38

Non-MBMS Service
Streaming
39

Non-MBMS Service
Streaming
40

Non-MBMS Service
Interactive
41

Non-MBMS Service
Interactive
42

Non-MBMS Service
Interactive
43

Non-MBMS Service
Interactive
44

Non-MBMS Service
Interactive
45

Non-MBMS Service
Interactive
46

Non-MBMS Service
Interactive
47

Non-MBMS Service
Interactive
48

Non-MBMS Service
Interactive
49

Non-MBMS Service
Interactive
50

Non-MBMS Service
Background
51

Non-MBMS Service
Background
52

Non-MBMS Service
Background
53

Non-MBMS Service
Background
54

Non-MBMS Service
Background
55

Non-MBMS Service
Background
56

Non-MBMS Service
Background
57

Non-MBMS Service
Background
58

Non-MBMS Service
Background
59

Non-MBMS Service
Background
60

Non-MBMS Service
Conversational
61

Non-MBMS Service
Conversational
62

Non-MBMS Service
Conversational
63

Non-MBMS Service
Conversational
64

Non-MBMS Service
Conversational
65

Non-MBMS Service
Conversational
<>
1106 , 992
ZTE
66

Non-MBMS Service
Conversational
67

Non-MBMS Service
Conversational
68

Non-MBMS Service
Conversational
69

Non-MBMS Service
Conversational
70

Non-MBMS Service
Streaming
71

Non-MBMS Service
Streaming
72

Non-MBMS Service
Streaming
73

Non-MBMS Service
Streaming
74

Non-MBMS Service
Streaming
75

Non-MBMS Service
Streaming
76

Non-MBMS Service
Streaming
77

Non-MBMS Service
Streaming
79

Non-MBMS Service
Interactive
80

Non-MBMS Service
Streaming
81

Non-MBMS Service
Streaming
82

Non-MBMS Service
Streaming
83

Non-MBMS Service
Streaming
84

Non-MBMS Service
Streaming
85

Non-MBMS Service
Streaming
87

Non-MBMS Service
Background
89

Non-MBMS Service
Streaming
90

Non-MBMS Service
Interactive
91

Non-MBMS Service
Interactive
92

Non-MBMS Service
Interactive
93

Non-MBMS Service
Interactive
94

Non-MBMS Service
Interactive
95

Non-MBMS Service
Interactive
100

Non-MBMS Service
Background
101

Non-MBMS Service
Background
<>
1106 , 993
ZTE
102

Non-MBMS Service
Background
103

Non-MBMS Service
Background
104

Non-MBMS Service
Background
105

Non-MBMS Service
Background
107

Non-MBMS Service
Interactive
109

Non-MBMS Service
Background
111

Non-MBMS Service
Streaming
113
115
117
119
121
123
125
127
129
131
133
135
137
139
140
1: PTM MBMS Service

Non-MBMS Service
Interactive
141

Non-MBMS Service
Interactive
142

Non-MBMS Service
Interactive
143

Non-MBMS Service
Interactive
144

Non-MBMS Service
Interactive
145

Non-MBMS Service
Interactive
146

Non-MBMS Service
Interactive
147

Non-MBMS Service
Interactive
148

Non-MBMS Service
Interactive
149

Non-MBMS Service
Interactive
150

Non-MBMS Service
Interactive
151

Non-MBMS Service
Interactive
152

Non-MBMS Service
Interactive
1: PTM MBMS Service

1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
1: PTM MBMS Service
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
<>
1106 , 994
ZTE
153

Non-MBMS Service
Interactive
154

Non-MBMS Service
Interactive
155

Non-MBMS Service
Interactive
156

Non-MBMS Service
Interactive
157

Non-MBMS Service
Interactive
158

Non-MBMS Service
Interactive
159

Non-MBMS Service
Interactive
160

Non-MBMS Service
Interactive
161

Non-MBMS Service
Interactive
163

Non-MBMS Service
Interactive
165

Non-MBMS Service
Interactive
167

Non-MBMS Service
Interactive
170

Non-MBMS Service
Background
171

Non-MBMS Service
Background
172

Non-MBMS Service
Background
173

Non-MBMS Service
Background
174

Non-MBMS Service
Background
175

Non-MBMS Service
Background
176

Non-MBMS Service
Background
177

Non-MBMS Service
Background
178

Non-MBMS Service
Background
179

Non-MBMS Service
Background
180

Non-MBMS Service
Background
181

Non-MBMS Service
Background
182

Non-MBMS Service
Background
183

Non-MBMS Service
Background
184

Non-MBMS Service
Background
185

Non-MBMS Service
Background
<>
1106 , 995
ZTE
186

Non-MBMS Service
Background
187

Non-MBMS Service
Background
188

Non-MBMS Service
Background
189

Non-MBMS Service
Background
190

Non-MBMS Service
Background
191

Non-MBMS Service
Background
193

Non-MBMS Service
Background
195

Non-MBMS Service
Background
197

Non-MBMS Service
Background
199

Non-MBMS Service
Interactive
200

Non-MBMS Service
Streaming
201

Non-MBMS Service
Streaming
202

Non-MBMS Service
Streaming
203

Non-MBMS Service
Streaming
204

Non-MBMS Service
Streaming
205

Non-MBMS Service
Streaming
206

Non-MBMS Service
Streaming
207

Non-MBMS Service
Streaming
208

Non-MBMS Service
Streaming
209

Non-MBMS Service
Streaming
210

Non-MBMS Service
Streaming
211

Non-MBMS Service
Streaming
212

Non-MBMS Service
Streaming
213

Non-MBMS Service
Streaming
214

Non-MBMS Service
Streaming
215

Non-MBMS Service
Streaming
216

Non-MBMS Service
Streaming
217

Non-MBMS Service
Streaming
<>
1106 , 996
ZTE
218

Non-MBMS Service
Streaming
219

Non-MBMS Service
Streaming
220

Non-MBMS Service
Streaming
221

Non-MBMS Service
Streaming
223

Non-MBMS Service
Streaming
225

Non-MBMS Service
Streaming
227

Non-MBMS Service
Streaming
229

Non-MBMS Service
Interactive
231

Non-MBMS Service
Interactive
233

Non-MBMS Service
Background
235

Non-MBMS Service
Background
237

Non-MBMS Service
Streaming
239

Non-MBMS Service
Streaming
241

Non-MBMS Service
Interactive
243

Non-MBMS Service
Background
245

Non-MBMS Service
Streaming
247

Non-MBMS Service
Background
249

Non-MBMS Service
Streaming
251

Non-MBMS Service
Interactive
253

Non-MBMS Service
Background
255

Non-MBMS Service
Streaming
257

Non-MBMS Service
Interactive
259

Non-MBMS Service
Background
261

Non-MBMS Service
Streaming
263

Non-MBMS Service
Interactive
265

Non-MBMS Service
Background
267

Non-MBMS Service
Streaming
269

Non-MBMS Service
Interactive
<>
1106 , 997
ZTE
271

Non-MBMS Service
Background
273

Non-MBMS Service
Streaming
275

Non-MBMS Service
Interactive
277

Non-MBMS Service
Background
279

Non-MBMS Service
Streaming
281

Non-MBMS Service
Interactive
283

Non-MBMS Service
Background
285

Non-MBMS Service
Streaming
287

Non-MBMS Service
Interactive
289

Non-MBMS Service
Background
291

Non-MBMS Service
Streaming
293

Non-MBMS Service
Interactive
295

Non-MBMS Service
Background
297

Non-MBMS Service
Streaming
<>
1106 , 998
ZTE
CN Domain Indicator
Direction
Maximum Bit Rate
CS Domain
Uplink
3400 bps
CS Domain
CS Domain
Downlink
Uplink
3400 bps
27200 bps
CS Domain
Downlink
27200 bps
CS Domain
Uplink
13600 bps
CS Domain
Downlink
13600 bps
CS Domain
CS Domain
Downlink
Uplink
1500 bps
6800 bps
CS Domain
CS Domain
Downlink
Uplink
6800 bps
23850bps
CS Domain
PS Domain
Downlink
Downlink
23850bps
23370000bps
PS Domain
Downlink
23370000bps
PS Domain
Downlink
23370000bps
PS Domain
Uplink
64000bps
PS Domain
Downlink
64000bps
PS Domain
Uplink
38800bps
PS Domain
Downlink
38800bps
PS Domain
Uplink
30800bps
PS Domain
Downlink
30800bps
PS Domain
Downlink
16800bps
CS Domain
Uplink
12200bps
CS Domain
Downlink
12200bps
PS Domain
Uplink
64000bps
PS Domain
Downlink
64000bps
PS Domain
Uplink
144000bps
PS Domain
Downlink
144000bps
PS Domain
Uplink
384000bps
PS Domain
Downlink
384000bps
PS Domain
Uplink
128000bps
PS Domain
Downlink
128000bps
<>
1106 , 999
ZTE
PS Domain
Uplink
32000bps
PS Domain
Downlink
32000bps
PS Domain
Uplink
64000bps
PS Domain
Downlink
64000bps
PS Domain
Uplink
144000bps
PS Domain
Downlink
144000bps
PS Domain
Uplink
384000bps
PS Domain
Downlink
384000bps
PS Domain
Uplink
128000bps
PS Domain
Downlink
128000bps
PS Domain
Uplink
32000bps
PS Domain
Downlink
32000bps
PS Domain
Uplink
64000bps
PS Domain
Downlink
64000bps
PS Domain
Uplink
144000bps
PS Domain
Downlink
144000bps
PS Domain
Uplink
384000bps
PS Domain
Downlink
384000bps
PS Domain
Uplink
128000bps
PS Domain
Downlink
128000bps
PS Domain
Uplink
32000bps
PS Domain
Downlink
32000bps
CS Domain
Uplink
14400bps
CS Domain
Downlink
14400bps
CS Domain
Uplink
28800bps
CS Domain
Downlink
28800bps
CS Domain
Uplink
57600bps
CS Domain
Downlink
57600bps
<>
1106 , 1000
ZTE
CS Domain
Uplink
64000bps
CS Domain
Downlink
64000bps
CS Domain
Uplink
32000bps
CS Domain
Downlink
32000bps
CS Domain
Uplink
14400bps
CS Domain
Downlink
14400bps
CS Domain
Uplink
28800bps
CS Domain
Downlink
28800bps
CS Domain
Uplink
57600bps
CS Domain
Downlink
57600bps
CS Domain
Uplink
64000bps
CS Domain
Downlink
64000bps
PS Domain
Downlink
27952000bps
PS Domain
Uplink
8000bps
PS Domain
Downlink
8000bps
PS Domain
Uplink
256000bps
PS Domain
Downlink
256000bps
PS Domain
Uplink
16000bps
PS Domain
Downlink
16000bps
PS Domain
Downlink
27952000bps
PS Domain
Downlink
27952000bps
PS Domain
Uplink
8000bps
PS Domain
Downlink
8000bps
PS Domain
Uplink
256000bps
PS Domain
Downlink
256000bps
PS Domain
Uplink
16000bps
PS Domain
Downlink
16000bps
PS Domain
Uplink
8000bps
PS Domain
Downlink
8000bps
<>
1106 , 1001
ZTE
PS Domain
Uplink
256000bps
PS Domain
Downlink
256000bps
PS Domain
Uplink
16000bps
PS Domain
Downlink
16000bps
PS Domain
Downlink
35280000bps
PS Domain
Downlink
35280000bps
PS Domain
Downlink
35280000bps
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
PS Domain
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Downlink
Uplink
8000bps
16000bps
32000bps
64000bps
128000bps
144000bps
256000bps
8000bps
16000bps
32000bps
64000bps
128000bps
144000bps
256000bps
512000bps
PS Domain
Downlink
768000bps
PS Domain
Uplink
711000bps
PS Domain
Downlink
900000bps
PS Domain
Uplink
1024000bps
PS Domain
Downlink
1200000bps
PS Domain
Uplink
1399000bps
PS Domain
Downlink
1800000bps
PS Domain
Uplink
1448000bps
PS Domain
Downlink
3650000bps
PS Domain
Uplink
2048000bps
PS Domain
Downlink
7200000bps
PS Domain
Uplink
2886000bps
<>
1106 , 1002
ZTE
PS Domain
Downlink
10100000bps
PS Domain
Uplink
3072000bps
PS Domain
Downlink
14000000bps
PS Domain
Uplink
4096000bps
PS Domain
Downlink
1024000bps
PS Domain
Uplink
5760000bps
PS Domain
Downlink
2048000bps
PS Domain
Uplink
11520000bps
PS Domain
Downlink
4096000bps
PS Domain
Downlink
6144000bps
PS Domain
Downlink
8192000bps
PS Domain
Downlink
8640000bps
PS Domain
Uplink
512000bps
PS Domain
Downlink
768000bps
PS Domain
Uplink
711000bps
PS Domain
Downlink
900000bps
PS Domain
Uplink
1024000bps
PS Domain
Downlink
1200000bps
PS Domain
Uplink
1399000bps
PS Domain
Downlink
1800000bps
PS Domain
Uplink
1448000bps
PS Domain
Downlink
3650000bps
PS Domain
Uplink
2048000bps
PS Domain
Downlink
7200000bps
PS Domain
Uplink
2886000bps
PS Domain
Downlink
10100000bps
PS Domain
Uplink
3072000bps
PS Domain
Downlink
14000000bps
<>
1106 , 1003
ZTE
PS Domain
Uplink
4096000bps
PS Domain
Downlink
1024000bps
PS Domain
Uplink
5760000bps
PS Domain
Downlink
2048000bps
PS Domain
Uplink
11520000bps
PS Domain
Downlink
4096000bps
PS Domain
Downlink
6144000bps
PS Domain
Downlink
8192000bps
PS Domain
Downlink
8640000bps
PS Domain
Downlink
42192000bps
PS Domain
Uplink
512000bps
PS Domain
Downlink
768000bps
PS Domain
Uplink
711000bps
PS Domain
Downlink
900000bps
PS Domain
Uplink
1024000bps
PS Domain
Downlink
1200000bps
PS Domain
Uplink
1399000bps
PS Domain
Downlink
1800000bps
PS Domain
Uplink
1448000bps
PS Domain
Downlink
3650000bps
PS Domain
Uplink
2048000bps
PS Domain
Downlink
7200000bps
PS Domain
Uplink
2886000bps
PS Domain
Downlink
10100000bps
PS Domain
Uplink
3072000bps
PS Domain
Downlink
14000000bps
PS Domain
Uplink
4096000bps
PS Domain
Downlink
1024000bps
<>
1106 , 1004
ZTE
PS Domain
Uplink
5760000bps
PS Domain
Downlink
2048000bps
PS Domain
Uplink
11520000bps
PS Domain
Downlink
4096000bps
PS Domain
Downlink
6144000bps
PS Domain
Downlink
8192000bps
PS Domain
Downlink
8640000bps
PS Domain
Downlink
17600000bps
PS Domain
Downlink
21096000bps
PS Domain
Downlink
17600000bps
PS Domain
Downlink
21096000bps
PS Domain
Downlink
17600000bps
PS Domain
Downlink
21096000bps
PS Domain
Downlink
512000bps
PS Domain
Downlink
512000bps
PS Domain
Downlink
512000bps
PS Domain
Downlink
42192000bps
PS Domain
Downlink
42192000bps
PS Domain
Downlink
35.055 Mbps
PS Domain
Downlink
35.055 Mbps
PS Domain
Downlink
35.055 Mbps
PS Domain
Downlink
46.74 Mbps
PS Domain
Downlink
46.74 Mbps
PS Domain
Downlink
46.74 Mbps
PS Domain
Downlink
41.928Mbps
PS Domain
Downlink
41.928Mbps
PS Domain
Downlink
41.928Mbps
PS Domain
Downlink
55.904 Mbps
<>
1106 , 1005
ZTE
PS Domain
Downlink
55.904 Mbps
PS Domain
Downlink
55.904 Mbps
PS Domain
Downlink
52.92 Mbps
PS Domain
Downlink
52.92 Mbps
PS Domain
Downlink
52.92 Mbps
PS Domain
Downlink
70.56 Mbps
PS Domain
Downlink
70.56 Mbps
PS Domain
Downlink
70.56 Mbps
PS Domain
Downlink
63.288 Mbps
PS Domain
Downlink
63.288 Mbps
PS Domain
Downlink
63.288 Mbps
PS Domain
Downlink
84.384 Mbps
PS Domain
Downlink
84.384 Mbps
PS Domain
Downlink
84.384 Mbps
<>
1106 , 1006
ZTE
Threshold of UL BLER for Bad Quality
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1007
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
<>
1106 , 1008
ZTE
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
1.995262314968880E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1009
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1010
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1011
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1012
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1013
ZTE
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
5.011872336272720E-02
<>
1106 , 1014
ZTE
Sub-Service
0
2
4
8
10
20
22
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
94
100
102
104
140
142
144
146
Traffic Class
Maximum Bit Rate
Conversational(no meaning for this service)

Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
UL 64kbps (PS Conversational Video)
UL PS 38.8kbps
UL PS 30.8kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
Conversational
UL CS 57.6kbps
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
<>
1106 , 1015
ZTE
148
150
152
154
156
158
170
172
174
176
178
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
<>
1106 , 1016
ZTE
UlSirTargDnStep
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.2dB
0.2dB
0.2dB
0.2dB
0.1dB
0.2dB
0.2dB
0.2dB
0.2dB
0.1dB
0.2dB
0.2dB
0.2dB
0.2dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.1dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
<>
1106 , 1017
ZTE
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
0.2dB
<>
1106 , 1018
Parameter Name
Description
ResBwdIndex
Basic Priority Transport Reserved 1~255

Bandwidth Index
(1..MAX_BP_SEG
MENT)
Uplink Reserved Bandwidth for DCH 1~65535kbps
I/B Traffic
Downlink Reserved Bandwidth for 1~65535kbps
DCH I/B Traffic
Uplink Reserved Bandwidth for HSPA 1~65535kbps
I/B Traffic
Downlink Reserved Bandwidth for 1~65535kbps
HSPA I/B Traffic
BPSeg
DchUlResBwd
DchDlResBwd
HspaUlResBwd
HspaDlResBwd
Range and Step
default
value
1
default
value
1
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
default
value
1
default
value
1
default
value
1
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
32 kbps
TbType
TbTypeInd
ex
BPSeg
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
0-DCH
1-HSPA
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
2-IP2ATM
1-IP
2-IP2ATM 2-IP2ATM
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
0-ATM
1-IP
0-ATM
0-ATM
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
1-IP
IpDscp (IP TOS)

2-MBMS
0-DCH
1-HSPA
2-MBMS
2-IP2ATM
2-IP2ATM
2-IP2ATM
2-IP2ATM
2-IP2ATM
0-ATM
0-ATM
0-ATM
0-ATM
0-ATM
1-IP
1-IP
1-IP
1-IP
1-IP
0x00
0x00
0x00
0x50
0x90
0x00
0x00
0x00
0x50
0x90
0x00
0x00
0x00
0x50
0x90
0x00
0x00
0x00
0x58
0x98
0x00
0x00
0x00
0x58
0x98
0x00
0x00
0x00
0x58
0x98
0x00
0x00
0x00
0x50
0x90
0x00
0x00
0x00
0x50
0x90
0x00
0x00
0x00
0x50
0x90
RNC
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
OMCR
0
6.31E-07
7.94E-07
1.00E-06
1.26E-06
1.58E-06
2.00E-06
2.51E-06
3.16E-06
3.98E-06
5.01E-06
6.31E-06
7.94E-06
1.00E-05
1.26E-05
1.58E-05
2.00E-05
2.51E-05
3.16E-05
3.98E-05
5.01E-05
6.31E-05
7.94E-05
1.00E-04
1.26E-04
1.58E-04
2.00E-04
2.51E-04
3.16E-04
3.98E-04
5.01E-04
6.31E-04
7.94E-04
1.00E-03
1.26E-03
1.58E-03
2.00E-03
2.51E-03
3.16E-03
3.98E-03
5.01E-03
6.31E-03
7.94E-03
1.00E-02
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
1.26E-02
1.58E-02
2.00E-02
2.51E-02
3.16E-02
3.98E-02
5.01E-02
6.31E-02
7.94E-02
1.00E-01
1.26E-01
1.58E-01
2.00E-01
2.51E-01
3.16E-01
3.98E-01
5.01E-01
6.31E-01
7.94E-01
1.00E+00
Parameter Name SceneId
TemplateId
Range and Step
N/A
N/A
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0
0
0
0
0
0
0
0
0
0
0
0
0
0
NbCMCfg
No
0~65535
0
1
2
3
4
5
6
20
21
22
23
24
25
26
NbCMCfg MeasObjT ComMeas MeasFilter

Note
ype
Type
Coeff
0: Period 1: Cell
0:
0, 1, 2, 3,
Report
Received 4, 5, 6, 7,
Parameter
Total Wide 8, 9, 11,
s for
Band
13, 15, 17,
RTWP
Power
19
1: Period
1:
Report
Transmitte
Parameter
d Carrier
s for TCP
Power
1 6:
0 UTRAN 3
2: Period 0
1 GPS
NodeB 1
1
3
1 Timing
Common 2
of 3
6
Measurem3
1 Cell
6
3
ent Report4
for
1 Frames
9
3
Parameter5
1 UE
8
3
s for
6
1 Positioning
20
3
TUTRAN8:
0
1 0
GPS
Transmitte 3
1
1
1
3
3: On
d Carrier
1 Power
Modificatio2
of 3
6
1 All
n NodeB 3
6 Codes 3
Common 4
1 not
9 Used 3
Measurem5
1 for
8 HS3
ent Report6
or
1 PDSCH
20
3
HS-SCCH
Transmi
RptType
RptPrdUnit RptPrd
2: Periodic 1: ms
9: On
2: min
Modificatio
n
2
2
2
9
2
2
2
2
2
2
9
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
OnModCh
angTime
RptPrdUnit (1/16..16)c
=ms
hips step
(10..60000 1/16chip
)ms
step10ms
RptPrdUnit
=min
1..60min
step=1
2000
0.0625
2000
0.0625
2000
0.0625
10
1
2000
0.0625
2000
0.0625
2000
0.0625
1000
0.0625
1000
0.0625
2000
0.0625
10
1
1000
0.0625
1000
0.0625
1000
0.0625
OnModDe
viTime
(1/16..16)c
hips step
1/16chip
0.0625
0.0625
0.0625
1
0.0625
0.0625
0.0625
0.0625
0.0625
0.0625
1
0.0625
0.0625
0.0625
GpsMeasA
ccClass
0:
Accuracy
Class A
1:
Accuracy
Class B
2:
Accuracy
Class C
0
0
2
2
0
0
0
0
0
2
2
0
0
0
SCCPCH
SceneId(SccpchCfg
TemplateId
Scene)
Range and Step
N/A
N/A
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
1
1
2
3
4
4
5
5
6
6
6
7
7
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
CPCId
Sib5OrSib6
4..35
0: SIB5
1: SIB6
2: SIB5 and SIB6
4
5
4
6
7
8
4
9
4
10
4
5
35
4
6
35
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SccpchCPCId
Pich
SceneId(SccpchCfg
TemplateId
Scene)
CPCId
4..35
Range and Step

Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
N/A
N/A
0
1
2
3
4
5
6
7
100..131
0
0
0
0
0
0
0
0
4
4
7
8
4
4
4
4
100
100
100
100
100
100
100
100
SccpchUsage
SccpchOffset
PO1
0: Carrying PCH
(0..149*256)chip
(0..6)dB step 0.25
Carrying R99
Step 256chip
dB
FACH, not
10240
Supporting CBS 0
2: Carrying R99
FACH, Supporting 1
0
CBS
0
10240
3: Carrying R99
2
0
FACH&PCH, not
3
0
Supporting CBS
4
0
4: Carrying R99
0
10240
FACH&PCH,
0
Supporting CBS 5
5: Carrying MCCH 0
10240
FACH&R99 FACH,6
0
not Supporting CBS0
10240
6: Carrying MCCH
1
0
FACH&R99 FACH,
12800
Supporting CBS 7
0
10240
7: Carrying MCCH
2
0
FACH
7
12800
Np
SttdInd
0: Inactive
(183672144) 1: Active
18
18
18
18
18
18
18
18
0
0
0
0
0
0
0
0
PO3
SttdInd
(0..6)dB step 0.25

dB
0: Inactive
1: Active
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
ZTE
Parameter Name
Proprietary Confidential
MeaEvtI
d[DBS_
IntraMea
RR_MA
IntraMea
FilterCoe MeasQu
MeasEvt
sCfgNot
RptCrt
X_INTR
sCfgNo
ff
antity
Num
e
A_MEAS
0~65535 0:Period
(0, 1, 2, 3, 0:CPICH 1:Event
1..DBS_R 1a,1b,1c,1
_EVENT
Report
4, 5, 6, 7, Ec/No
Reporting R_DBS_R d,1e,1f1j
]
Range and Step
Dafault Value
0
2
Dafault Value
Dafault Value
5
7
Dafault Value
Dafault Value
Dafault Value
10
11
22
Dafault Value
27
Dafault Value
Parameter
s for
CPICH
Ec/No
2:UE
0
Event
2
Report
Parameter
s for
CPICH
5
Ec/No
5:Period
7
Report
Parameter
s for
CPICH
10
RSCP
11
7:UE
Event
2
Report
Parameter
s for
CPICH
7
RSCP
10:Detecte
d Set
Measurem
ent
Parameter
s for
CPICH
Ec/No
11:Detecte
d
SetMeasur
ement
Parameter
s for
CPICH
RSCP
8, 9, 11,
1:CPICH Criteria
13, 15, 17, RSCP
2:Periodic
19)
2:Pathloss al
Reporting
Criteria
2
0
2
2
0
1
R_MAX_I
NTRA_ME
AS_EVEN
T
1
1a
7
1a,1b,1c,1
d,1e,1f,1j
3
3
1
1
2
1
1
7
1a
1a,1b,1c,1
d,1e,1f,1j
3
3
2
0
1
0
1
1
1
1
1
7
1a
1a
1a,1b,1c,1
d,1e,1f,1j
1a,1b,1c,1
d,1e,1f,1j
Notes: The values in the blue cells are the

invalid values
<>
1106 , 1028
ZTE
RptRang
e
[DBS_R
R_MAX_
INTRA_
(0..14.5)d
MEAS_E
B
VENT]
W[DBS_
RR_MA
X_INTR
A_MEAS
_EVENT
(0.0..2.0 )
]Step 0.1
step 0.5dB
Hysteres
is[DBS_
RR_MA
X_INTR
A_MEAS
(0..7.5)dB
_EVENT
step
0.5dB
]
ThreshU
sedFreq[
DBS_RR
_MAX_I
NTRA_M
(-115..
EAS_EV
165)
ENT]
CPICH
RSCP: (115..-25 )
dBm
CPICH
0
0
0
-24
Ec/No: (3,5,0,0,0,0 0.0,0.0,0.0 0,0,4,4,2,2 -24,-24,24..0) dB
,0
,0.0,0.0,0. ,4
24,-24,Pathloss
0,0.0
12,-20,-24
(30..165)d
B
0
0
0
-24
6,8,0,0,0,0 0.0,0.0,0.0 [4,4,6,6,4, -115,-115,,0
,0.0,0.0,0. 4,6
115,-115,0,0.0
80,-97,115
4
7
4,7,0,0,0,0
,0
0
0
0.0,0.0,0.0
,0.0,0.0,0.
0,0.0
2
6
0,0,4,4,2,2
,4
-24
-24
-24,-24,24,-24,12,-20,-24
RptDeac
tThr[DBS
_RR_MA
X_INTR
A_MEAS
0,
1, 2, 3,
_EVENT
4,
] 5, 6, 7
RplcActT
EvtRptA EvtRptInt
TrigTime
hr[DBS_
mount[D erval[DB
[DBS_R
RR_MA
BS_RR_ S_RR_M
R_MAX_
X_INTR
MAX_IN AX_INT
INTRA_
A_MEAS
TRA_ME RA_MEA
MEAS_E
0,
1,
2,
3,
(0,
10,
20,
1,
2, 4, 8, (0,
250,
_EVENT
AS_EVE
S_EVEN
VENT]
4,
5,
6,
7
40,
60,
80,
16,
32,
64,
500,
]
NT]
T] 1000,
100, 120,
160, 200,
240, 320,
640, 1280,
2560,
0
0
240
5000)ms
2,0,0,0,0,0 0,0,3,0,0,0 200,640,3
,0
,3
20,
320,200,2
00,320
Infinity
0
0
240
2,0,0,0,0,0 0,0,3,0,0,0 200,200,2
,0
,3
00,
200,200,2
00,200
Infinity
4,4,4,Infinit
y,Infinity,Inf
inity,4
500
2000,2000
,2000,500,
500,500,2
000
6
6
2,0,0,0,0,0
,0
1
1
4,4,4,Infinit
y,Infinity,Inf
inity,4
2000
2000
2000,2000
,2000,500,
500,500,2
000
0
0
0,0,3,0,0,0
,3
200
200
100,640,3
20,320,20
0,200, 320
2000,
4000,
8000,
16000)ms
Infinity
500
4,4,4,Infinit 2000,2000
y,Infinity,Inf ,2000,500,
inity,4
500,500,2
000
6,8,0,0,0,0 0.0,0.0,0.0 [4,4,6,6,4, -115,-115,- 2,0,0,0,0,0 0,0,3,0,0,0 100,200,2 4,4,4,Infinit 2000,2000

,0
,0.0,0.0,0. 4,6
115,-115,- ,0
,3
00,
y,Infinity,Inf ,2000,500,
0,0.0
80,-97,200,200,2 inity,4
500,500,2
115
00,200
000
cells are the
<>
1106 , 1029
ZTE
PrdRptA PrdRptIn
mount
terval
1, 2, 4, 8, (250, 500,
16, 32, 64, 1000,
Infinity
2000,
3000,
4000,
6000,
8000,
Infinity
1000
12000,
1
250
16000,
20000,
24000,
28000,
Infinity
500
32000,
64000)ms
1
250
1
1
1
250
250
250
250
<>
1106 , 1030
DxHsBo0E FachE4aT DchE4aTh DchE4bTh DToPchTh FToPchTh

Parameter SceneId(D
TemplateId 4bThd
hd
d
d
d
d
Name
rbcScene)
Range
and Step
N/A
N/A
Dafault
Value
Dafault
Value
1~65535
0~65535
1..255
1..255
1~65535
1~65535
10
10
DToIdleTh FToIdleTh PchHoldTi ToFtimesT ETtiEaThd ETtiEbThd DtcpEaTh DtcpEbTh InitialRate

d
d
meThr
hr
d
d
Ul
1~65535
1~65535
1~65535s 1~65535
1..255
1..255
1...255
1..255
0..65535
kbps
30
16
30
16
InitialRate
Dl
0..65535
kbps
64
64
TrfPcIndex SrvType
TrafficClass
0~65535
0: Conversational
1: Streaming
2: Interactive
3: Background
Conversational(no
meaning
4: Unknown Conversational
for this service)
Conversational(no meaning
for this service)
for this service)
Parameter Name
SceneId(L
TemplateId
oadScene)
Range and Step
N/A
N/A
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0~65534
1
3
5
7
9
11
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
81
83
85
for this service)
for this service)
Conversational
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
91
Interactive
93
95
101
Interactive
Interactive
Background
103
105
Background
Background
141
143
145
147
149
151
153
155
157
159
161
163
165
167
171
173
175
177
179
181
183
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
233
235
237
239
241
243
245
113
115
117
119
121
123
125
127
129
131
133
135
137
139
15
17
19
79
87
89
107
109
111
199
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
285
287
289
291
293
295
297
0
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
for this service)
10
for this service)
for this service)
for this service)
Conversational
20
Conversational
22
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Conversational
Conversational
Conversational
Streaming
4
8
66
68
70
72
74
76
80
82
84
90
92
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
172
174
176
178
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
160
190
220
Interactive
Background
for this service)
for this service)
for this service)
3
5
7
9
11
21
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
for this service)
for this service)
Conversational
Conversational
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
23
25
27
29
31
33
35
37
39
41
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
59
61
63
65
67
69
71
73
75
77
81
83
85
91
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
93
95
101
Interactive
Interactive
Background
103
105
Background
Background
141
143
145
147
149
151
153
155
157
159
161
163
165
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
43
45
47
49
51
53
55
57
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
167
171
173
175
177
179
181
183
185
187
189
191
193
195
197
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
113
115
117
119
121
123
125
127
129
131
133
135
Interactive
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Background
Background
Streaming
Streaming
Interactive
Background
Streaming
Background
Background
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
137
139
15
17
19
79
87
89
107
109
111
199
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
285
287
289
291
293
295
297
0
Streaming
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
Interactive
Background
Streaming
for this service)
10
for this service)
for this service)
for this service)
Conversational
20
Conversational
22
Conversational
4
8
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
80
82
84
90
92
94
100
102
104
140
142
144
146
148
150
152
154
156
158
170
172
174
176
178
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Conversational
Conversational
Conversational
Conversational
Conversational
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Interactive
Interactive
Background
Background
Background
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Interactive
Background
Background
Background
Background
Background
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
Dafault Value
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
180
182
184
186
188
200
202
204
206
208
210
212
214
216
218
160
190
220
Background
Background
Background
Background
Background
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Streaming
Interactive
Background
Streaming
Notes: The values in the blue cells are the invalid
Note 1Bler Target

Value Range
OMCR
0
6.30957344480191
5e-007
7.94328234724282
4e-007
1.00000000000000
0e-006
1.25892541179416
6e-006
1.58489319246111
4e-006
1.99526231496887
9e-006
2.51188643150958
2e-006
3.16227766016837
9e-006
3.98107170553496
8e-006
5.01187233627272
4e-006
6.30957344480192
8e-006
RNC
0
1
2
3
4
5
6
7
8
9
10
11
7.94328234724282
0e-006
1.00000000000000
0e-005
1.25892541179416
6e-005
1.58489319246111
4e-005
1.99526231496888
0e-005
2.51188643150958
1e-005
3.16227766016838
2e-005
3.98107170553496
6e-005
5.01187233627272
2e-005
6.30957344480193
3e-005
7.94328234724281
7e-005
1.00000000000000
0e-004
1.25892541179416
8e-004
1.58489319246111
5e-004
1.99526231496887
7e-004
2.51188643150958
0e-004
3.16227766016838
0e-004
3.98107170553497
4e-004
5.01187233627272
6e-004
6.30957344480193
0e-004
7.94328234724280
3e-004
1.00000000000000
0e-003
1.25892541179416
8e-003
1.58489319246111
4e-003
1.99526231496887
8e-003
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
2.51188643150957
9e-003
3.16227766016837
9e-003
3.98107170553497
2e-003
5.01187233627272
4e-003
6.30957344480192
8e-003
7.94328234724281
6e-003
1.00000000000000
0e-002
1.25892541179416
8e-002
1.58489319246111
4e-002
1.99526231496888
0e-002
2.51188643150958
0e-002
3.16227766016837
9e-002
3.98107170553497
4e-002
5.01187233627272
2e-002
6.30957344480193
3e-002
7.94328234724281
2e-002
1.00000000000000
0e-001
1.25892541179416
7e-001
1.58489319246111
4e-001
1.99526231496888
0e-001
2.51188643150958
0e-001
3.16227766016838
0e-001
3.98107170553497
2e-001
5.01187233627272
2e-001
6.30957344480193
2e-001
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
7.94328234724281
62
5e-001
1.00000000000000
63
0e+000
3.9810717
05534974
e-004
MaxBitRate
10..256,000,000 bps
step 10 bps
47242824
e-007
5.0118723
36272726
e-004
BLERtarge ErrorThres BLERAccp
t6.3095734 h
Period
44801930
e-004
(1..50)TBs (1..65535)
TBs
7.9432823
47242803
e-004
1.000000001
1
1.0000000
1.000000001
00000000
e-003
1.000000001
1.2589254
DL 1.5kbps sub-service used by F- 11794168e
1.000000001
DPCH
-003
1.000000001
1.5848931
92461114e
1.000000001
-003
DL 64kbps (PS Conversational
1.000000001
Video)
1.9952623
1.000000001
DL PS 38.8kbps
14968878
1.000000001
DL PS 30.8kbps
e-003
1.000000001
DL PS 16.8kbps
2.5118864
1.000000001
31509579
DL PS 64kbps
1.000000001
e-003
1.000000001
DL PS 144kbps
DL PS 384kbps
1.000000001
3.1622776
DL PS128kbps
1.000000001
60168379
1.000000001
DL PS 32kbps
e-003
DL PS 64kbps
1.000000001
1.000000001
3.9810717
DL PS 144kbps
DL PS 384kbps
05534972
1.000000001
e-003
DL PS 128kbps
1.000000001
1.000000001
DL PS 32kbps
5.0118723
DL PS 64kbps
1.000000001
36272724
1.000000001
DL PS 144kbps
e-003
DL PS 384kbps
1.000000001
DL PS 128kbps
1.000000001
6.3095734
1.000000001
44801928
DL PS 32kbps
e-003
1.000000001
DL CS 14.4kbps
DL CS 28.8kbps
1.000000001
7.9432823
1.000000001
DL CS 57.6kbps
47242816
DL CS 64kbps
1.000000001
e-003
DL CS 32kbps
1.000000001
DL CS 14.4kbps
1.000000001
1.0000000
DL CS 28.8kbps
1.000000001
00000000
DL CS 57.6kbps
1.000000001
e-002
DL CS 64kbps
1.000000001
1.2589254
DL PS 8kbps
1.000000001
11794168e
1.000000001
DL PS 256kbps
-002
DL PS 16kbps
1.000000001
1.5848931
92461114e
-002
1.9952623
14968880
1.0000000
00000000
e-006
ErrorThres BLERAccp BLERtarge
1.2589254
hHLd
PerHLd
tHLd
11794166e
-006
(1..50)TBs (1..65535)
1.5848931
TBs
92461114e
-006
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
1.9952623
14968879
0
e-006
2.5118864
0
31509582
e-006
0
3.1622776
0
60168379
e-006
1.25892541
0
3.9810717
05534968
0
e-006
0
0
5.0118723
1.25892541
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
UL 64kbps (PS Conversational
Video)
UL PS 38.8kbps
UL PS 30.8kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1.000000001
200
1.000000001
200
1.000000001
200
1.000000001
200
1.000000002
250
70
1.000000001
700
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000001
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000001
1.000000002
250
250
250
250
250
500
250
250
250
250
500
250
250
250
250
500
250
250
250
250
250
300
250
250
250
250
250
250
250
250
200
250
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
70
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
1.000000002
1.000000001
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
250
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1.000000001
1.000000001
1.000000001
1.258925411
1.25892541
1.000000001
DL 1.5kbps sub-service used by F1.000000001

DPCH
1.000000001
DL 64kbps (PS Conversational
Video)
DL PS 38.8kbps
DL PS 30.8kbps
DL PS 16.8kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL PS 64kbps
DL PS 144kbps
DL PS 384kbps
DL PS 128kbps
DL PS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL CS 32kbps
DL CS 14.4kbps
DL CS 28.8kbps
DL CS 57.6kbps
DL CS 64kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 8kbps
DL PS 256kbps
DL PS 16kbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
1.000000001
1.000000001
1.000000001
1.258925411
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
1.25892541
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 768kbps
DL PS 900kbps
DL PS 1.2Mbps
DL PS 1.8Mbps
DL PS 3.65Mbps
DL PS 7.2Mbps
DL PS 10.1Mbps
DL PS 14.0Mbps
DL PS 1.024Mbps
DL PS 2.048Mbps
DL PS 4.096Mbps
DL PS 6.144Mbps
DL PS 8.192Mbps
DL PS 8.640Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 17.6Mbps
DL PS 21.096Mbps
DL PS 512kbps
DL PS 512kbps
DL PS 512kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
MBMS DL PS 144kbps
MBMS DL PS 256kbps
MBMS DL PS 8kbps
MBMS DL PS 16kbps
MBMS DL PS 32kbps
MBMS DL PS 64kbps
MBMS DL PS 128kbps
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
MBMS DL PS 144kbps
MBMS DL PS 256kbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 23.37Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 27.952Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 35.28Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 42.192Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 35.055 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 46.74 Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 41.928Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 55.904 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 52.92 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 70.56 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 63.288 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
DL PS 84.384 Mbps
UL 64kbps (PS Conversational
Video)
UL PS 38.8kbps
0
1
0
1
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1.000000001
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1.000000001
200
1.000000001
200
1.000000001
200
1.000000001
200
1.000000001
70
70
1.000000001
700
1.000000002
250
UL PS 30.8kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL PS 64kbps
UL PS 144kbps
UL PS 384kbps
UL PS128kbps
UL PS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL CS 32kbps
UL CS 14.4kbps
UL CS 28.8kbps
UL CS 57.6kbps
UL CS 64kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 8kbps
UL PS 256kbps
UL PS 16kbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
1.000000002
1.000000001
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000005
1.000000002
1.000000005
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000001
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000001
1.000000002
1.000000002
1.000000001
1.000000002
1.000000005
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
250
70
250
250
500
250
250
250
250
500
250
250
100
250
100
250
250
250
250
250
300
250
250
250
250
250
250
250
250
200
250
250
200
250
100
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
70
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 512kbps
UL PS 711kbps
UL PS 1024kbps
UL PS 1.399Mbps
UL PS 1.448Mbps
UL PS 2.048Mbps
UL PS 2.886Mbps
UL PS 3. 072Mbps
UL PS 4.096Mbps
UL PS 5.76Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
UL PS 11.52Mbps
alues in the blue cells are the invalid values
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
1.000000002
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
ThrHarqFa ThrHarqFa NhrThrUpTti10[3] NhrThrDownTti10[ NhrThrUpTti2[3] NhrThrDownTti2[3

ilTti2[3]
ilTti10[3]
3]
]
0~255
0~255
0~15, step: 0.01
0~15, step: 0.01
0~15, step: 0.01 0~15, step: 0.01
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
0.03,0.03,0.3
0.01,0.01,0.1
0.03,0.3,0.6
0.01,0.1,0.4
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
2,2,2
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.03,0.03,0.3
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.01,0.01,0.1
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.03,0.3,0.6
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
0.01,0.1,0.4
UpThrSam DwThrSa UpThrSamp

pNuTti10[3 mpNuTti10 NumTti2[3]
]
[3]
DwThrSamp QePhychB QePhyBer QePhyBer QeCntThre

NumTti2[3]
erTarget
TarNorm
TarSil
s
0~255
0~255
0~255
0~255
(0..100 )%, 0..100%

0..100%
1..20
step 0.1% Step: 0.1% Step: 0.1%
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
1.3
1.3
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
2
2
4.9
1.3
0
0
1
2.4
1.3
0
0
1
2.4
1.3
0
0
1
2.4
4
2
1.3
1.3
2
4
2
1.3
1.3
4
0
4.5
4
0
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
2
2
4.9
1.3
0
0
1
2.4
1.3
0
0
1
2.4
1.3
0
0
1
2.4
4
2
1.3
1.3
2
4
2
1.3
1.3
4
0
4.5
4
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
4.5
4
0
4.5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
4.5
4
0
4.5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0,0,0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
32,16,16
1.3
1.3
4,4,4
32,16,16
4,4,4
32,16,16
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
2
4.9
1.3
0
0
1
2.4
1.3
0
0
1
2.4
1.3
0
0
1
2.4
4
2
1.3
1.3
2
4
2
1.3
1.3
4
0
4.5
4
0
4.5
4
0
4.5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
2
4.9
1.3
0
0
1
2.4
1.3
0
0
1
2.4
1.3
0
0
1
2.4
4
2
1.3
1.3
2
4
2
1.3
1.3
4
0
4.5
4
0
4.5
4
0
4.5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
4,4,4
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
32,16,16
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Logical
Name
Cid
AppHsdpaE
Ind
Value
GUI Name Range
and Step
Default
Value 1
Default
Value 2
Default
Value 3
Default
Value 4
Default
Value 5
Default
Value 6
Bit0=0/1:
Bit0=0
64QAM is
not Used/
64QAM is
Used
Bit0=0
Bit0=0
Bit0=0
Bit0=1
Bit0=1
Bit1=0/1:
Bit1=0
MIMO is not
Used/
MIMO
is
Used
Bit1=1
Bit1=0
Bit1=1
Bit1=0
Bit1=1
Bit2=0/1:
Bit2=0
DC-HSDPA
is not Used/
DC-HSDPA
Actual
Configuratio is Used
n of HSDPA
Evolution
Function of Bit3~7:
UE in the Reserved,
fixed to 0
Cell
Bit2=0
Bit2=1
Bit2=1
Bit2=0
Bit2=0
10
10
10
Cell
Identity
0..65534
MeasPwrOff HS-PDSCH (-6..13)dB 8

set
Measureme step 0.5 dB
nt
Power D=(P+6)*2,
0..38
Offset
Default
Value 7
Default
Value 8
Bit0=1
Bit0=1
Bit1=0
Bit1=1
Bit2=1
Bit2=1
10
CHTYPEIND
CCCH
1
0
SRB1
0
1
Scheduling Priority Indicator

Downlink Enhanced CELL_FACH T1
Discard Timer Configuration Indication
Discard Timer
MAC ehs window size
Reset Timer Controlling the Reset of the MAC-ehs Reordering
Functionality.
15
50
14
50
Maximum MAC-c PDU Size of Enhanced FACH for Flexible PDU
124
124
Byte(MaxMacPD Byte(MaxMacPD
USize)
USize)
MAC-ehs queue identity

Channel Type Indication for Downlink Enhanced CELL_FACH Priority Queue
1
1000
16
2
1
4000
16
2
Else SRB
2
2
DTCH
3
3
13
50
0
50
1
4000
16
2
4000
16
2
124
Byte(MaxMacP
DUSize)
600
Byte(MaxMac
PDUSize)
SceneId(H Sib3orSib4 QualMeas

Parameter
oCelSelSc
Name
ene)
0:SIB3
1:CPICH
Range
N/A
1:SIB4
Ec/No
and Step
2:CPICH
0
1
Dafault
RSCP
0
Value
Dafault
Value
Dafault
Value
Dafault
Value
SIntraSear SIntraSear SInterSear SInterSear SSearchH

chPre
ch
chPre
ch
CSPre
0:False
1:True
(0..20 )dB
Step2dB
0:False
1:True
(0..20 )dB
Step2dB
0:False
1:True
14
10
14
10
14
10
14
10
SSearchH OtherRATI SSearchR SHCSRat

CS
nfoPre
at
Pre
SHCSRat
SLimitRat
QqulmnOff Qqualmin
stPre
Offset
QrxlvmnOf
fstPre
(1..91)dB
Step2dB
0:False
1:True
(0..20 )dB
Step2dB
0:False
1:True
(1..91)dB
Step2dB
(0..20 )dB
Step2dB
0:False
1:True
(1..16)dB
0:False
1:True
16
16
16
16
Qrxlevmin QHyst1S
Offset
QHyst1SP QHyst1SF QHyst2S

ch
ach
QHyst2SP QHyst2SF TReselecti TReselecti

ch
ach
on
onPch
(2..16)dB (0..40)dB
step:2dB Step2 dB
(0..40)dB
(0..40)dB
(0..40)dB
Step2 dB
(0..40)dB
(0..40)dB
(0..31)s
(0..31)s
16
10
10
10
16
10
10
10
16
10
10
10
16
10
10
10
TReselecti SpSfPre
onFach
SpSf
InterFreqS InterFreqS InterRatSf InterRatSf NoHcsTCr NoHcsNCr

fPre
f
Pre
Max
(0..6.2)s
Step0.2 s
0:False
1:True
(0..1 )step 0:False

0.1
1:True
(1..4.75 )
step 0.25
0:False
1:True
(1..4.75 )
step 0.25
0.5
0.5
Not Used, 1..16

30, 60,
120, 180,
8
240)s
Not Used
8
Not Used
0.5
8
Not Used
0.5
8
Not Used
NoHcsTCr HcsSrvCelI TCrMax

MaxHyst
nfoPre
(Not Used, 0:False
10, 20, 30, 1:True
40, 50, 60,
0
70)s
Not Used
(Not Used, 1~16

30, 60,
120, 180,
8
240)s
Not Used
0
Not Used
Not Used
Not Used
TCrMaxHy CellBarred InFreqRes TBarred

st
Ind
elInd
CellRsvExt
(Not Used,
10, 20, 30,
40, 50, 60,
70)s
Not Used
0:Reserve
d
1:Not
1
Reserved
0
Not Used
0: Allowed
1: Not
Allowed
0
Not Used
1
10
2
Not Used
(10,20,40,
80,160,32
0,640,128
0)s
10
10
8
Not Used
1: Barred
2: Not
Barred
2
Not Used
8
0
Not Used
NCr
1
10
ACBarred
Omcr
IntraRptQ
Sib3
Bitstring(1
6)
Bit0:
65535
AC0Bit1:
AC1..
Bit9:AC9
65535
0:Barred
1:Not
65535
Barred
bit10~bit15
:Reserved
65535
value is
1
0:CPICH
Ec/No
1:CPICH
0
RSCP
0
0
0
Parameter
SceneId
Name
Range
and Step
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
MeaEvtId[
DBS_RR_
InterMeas InterMeas
MeasQuan
MeasEvtN
RptCrt
FilterCoeff
MAX_INT
CfgNo
CfgNote
tity
um
ER_MEAS
_EVENT]
0~65535 0: (UE
2: Inter0: CPICH (0, 1, 2, 3, 1..
(2a,
2b,
Period
frequency Ec/No
4, 5, 6, 7, DBS_RR_ 2c, 2d, 2e,
Report
Event
1: CPICH 8, 9, 11,
MAX_INT 2f)
0
0
3
Parameter 3
Reporting 0
RSCP
13, 15, 17, 1
ER_MEAS 2a
s for
Criteria
19)
_EVENT
CPICH
3:
3
3
2
0
3
6
2a,2b,2c,2
Ec/No)
Periodical
d,2e,2f
3: (UE
Reporting
4
4
Inter3
Criteria
1
3
1
2a
frequency
Event
7
7
2
1
3
6
2a,2b,2c,2
Report
d,2e,2f
Parameter
s8 for
8
2
0
3
2
2d,2f
CPICH
Ec/No)
4:
9
9 (UE
2
1
3
2
2d,2f
Period
Report
10
10
0
3
2
2d,2f
Parameter 2
s for
CPICH
11
11
2
1
3
2
2d,2f
RSCP)
7: (UE
Interfrequency
Event
ReportNotes: The values in the blue cells are the invalid values
Parameter
s for
CPICH
RSCP)
8: (UE
Interfrequency
Event
Report
Parameter
s for
CPICH
Ec/No(GS
M))
9: (UE
Interfrequency
Event
Report
Parameter
s for
CPICH
RSCP(GS
M))
10: (UE
Interfrequency
Event
Report
Parameter
s for
CPICH
Ec/No(EU
TRAN
ThreshUse
dFreq[DBS
_RR_MAX
_INTER_M
EAS_EVE
(-115..0)
NT]
CPICH
RSCP: (-24
115..-25 )
dBm
CPICH
-24,-13,Ec/No:
24,-13,- (24..0)
24,-8 dB
-115
Wused[DB
S_RR_MA
X_INTER_
MEAS_EV
ENT]
(0.0..2.0
)
Step 0.1
Hysteresis[
DBS_RR_
MAX_INT
ER_MEAS
_EVENT]
(0,
0.5..14.5)d
B
2
step 0.5dB
TrigTime[D
BS_RR_M
AX_INTER
_MEAS_E
VENT]
(0,
10, 20,
40, 60, 80,
100, 120,
0
0
160, 200,
240, 320,
1280,
0.0,0.0,0.0 4,4,4,4,4,4 640,
100,100,1
2560,
,0.0,0.0,0.
00,640,10
5000)ms
0
0,640
0
2
0
ThreshNo
UsedFreq[
DBS_RR_
MAX_INT
ER_MEAS
(-115..0)
_EVENT]
CPICH
RSCP: (-24
115..-25 )
dBm
CPICH
-24,-5,-5,Ec/No:
(24,-13,-24
24..0)
-115
dB
WNoUsed[
DBS_RR_
MAX_INT
ER_MEAS
_EVENT])
(0.0..2.0
Step 0.1
PrdRptAm PrdRptInte
ount
rval
-115,-95,115,-95,115,-80
-13,-8
0.0,0.0,0.0 4,4,4,4,4,4 100,100,1 -115,-50,,0.0,0.0,0.

00,640,10 50,-115,0
0,640
95,-115
0.0,0.0
4,4
640,640
-24,-24
0.0,0.0,0.0 Infinity
,0.0,0.0,0.
0
0.0,0.0
Infinity
(250, 500,
1000,
2000,
1000
3000,
4000,
6000,
500
8000,
12000,
500
16000,
20000,
24000,
500
28000,
32000,
64000)ms
500
-95,-80
0.0,0.0
4,4
640,640
-115,-115
0.0,0.0
Infinity
500
-13,-8
0.0,0.0
4,4
640,640
-24,-24
0.0,0.0
Infinity
500
-95,-80
0.0,0.0
4,4
640,640
-115,-115
0.0,0.0
Infinity
500
1, 2, 4, 8,
16, 32, 64,
Infinity
Infinity
0.0,0.0,0.0 Infinity
,0.0,0.0,0.
0
0
Infinity
Parameter
SceneId
Name
InterRatCf InterRatCf
OwnMeas GsmFilter
FilterCoeff
gNo
gNote
Quantity
Coeff
Range
and Step
N/A
0~65535
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
Dafault
Value
N/A
0
2
3
5
6
7
EutraFilter
RptCrt
Coeff
0: Period 0, 1, 2, 3, 0: CPICH 0, 1, 2, 3, 0, 1, 2, 3, 1: InterReport

4, 5, 6, 7, Ec/No
4, 5, 6, 7, 4, 5, 6, 7, RAT Event
Parameter 8, 9, 11,
1: CPICH 8, 9, 11,
8, 9, 11,
Reporting
0
3
s for Own 3
13, 15, 17, 0
RSCP
13, 15, 17, 3
13, 15, 17, 2
Criteria
System
19
19
19
2:
CPICH
Periodical
2
3
0
3
3
1
Ec/No
Reporting
2: UE
Criteria
3
Event
3
1
3
3
2
Report
Parameter
1
3
3
1
s5 for Own 3
System
CPICH
6
3
0
3
3
1
Ec/No
3: Period
Report
7
3
1
3
3
1
Parameter
s for Own
System
CPICH
RSCPNotes: The values in the blue cells are the invalid values
5: UE
Event
Report
Parameter
s for Own
System
CPICH
RSCP
6: UE
Event
Report
Parameter
s for Own
System
CPICH
Ec/No( EU
TRAN
FDD)
7: UE
Event
Report
Parameter
s for Own
System
CPICH
RSCP( EU
TRAN
FDD)
EventId[D
BS_RR_M
EventNum AX_RAT_
MEAS_EV
ENT]
1..DBS_R 3a,3b,3c,3
R_MAX_R d
AT_MEAS
1
3a
_EVENT
4
1
Thresh[DB
S_RR_MA
X_RAT_M
EAS_EVE
(NT]
-115..0)
CPICH
RSCP: (
-24
-115..-25 )
dBm
CPICH
3a,3b,3c,3 -9,-24,-24,Ec/No:
(
d
24
-24..0)
3a
-115
dB
W[DBS_R
R_MAX_R
AT_MEAS
_EVENT]
( 0.0..2.0 )
Step 0.1
0
0,0,0,0
0
ThreshSys
[DBS_RR_
MAX_RAT
_MEAS_E
(VENT]
-115..0)
CPICH
RSCP: (
-115
-115..-25 )
dBm
CPICH
-90,-95,Ec/No:
95,-115 (
-24..0)
-115
dB
Hysteresis[
DBS_RR_
MAX_RAT
_MEAS_E
(VENT]
0,
0.5..7.5)dB
step 0.5dB
4
4,4,2,4
4
TrigTime[D
BS_RR_M
AX_RAT_
MEAS_EV
(ENT]
0, 10, 20,
40, 60, 80,
100, 120,
100
160, 200,
240, 320,
640,
1280,
100,100,1
2560,
00,100
5000)ms
100
PrdRptAm PrdRptInte
ount
rval
1, 2, 4, 8,
16, 32, 64,
Infinity
Infinity
Infinity
Infinity
3a,3b,3c,3 -95,-115,d
115,-115
0,0,0,0
-90,-95,95,-115
4,4,4,4
100,100,1 Infinity
00,100
3a,3b,3c,3 -9,-24,-24,- 0,0,0,0

d
24
-90,-95,95,-115
4,4,2,4
100,100,1 Infinity
00,100
3a,3b,3c,3 -95,-115,d
115,-115
-90,-95,95,-115
4,4,4,4
100,100,1 Infinity
00,100
0,0,0,0
( 250, 500,
1000,
2000,
1000
3000,
4000,
6000,
500
8000,
12000,
500
16000,
20000,
24000,
500
28000,
32000,
64000)ms
500
500
SceneId(
LoadBal InitRrcLBS RabAssLB
Sw
anceSce w
ne)
0: Off
0: Off
Range
1: Inter1: Interand Step N/A
frequency frequency
Parameter
Name
Dafault
Value
Dafault
Value
CallHoldL
BSw
InitRrcSBS RabAssSB CallHoldS DlLdBalPw

w
Sw
BSw
rSwch
0: Off
0: Off
1: Inter1: On
frequency
Switch On Switch On Switch On
2:
0
0 Inter0
0
RAT
Switch On
1
0 Inter0
0
3:
frequency
and InterRAT
Switch On
0: Off
1: On
0: Off
1: On
0: Off
1: On
DlLdBalPw ExtraCDelt UlLdBalPw UlLdBalPw ExtraCDelt LdBalCdS LdBalCdW ExtraCDelt CsBalSwc

rWeight
aTrd
rSwch
rWeight
aTru
wch
eight
aCdTrd
h
(1..100%)
step 1%
(0..100) % 0: Off
1: On
(1..100%)
step 1%
0..100 %
0: Off
1: On
(1..100%)
step 1%
0..100 %
0: Off
1: On
50
10
10
50
10
50
10
10
50
10
ExtraDelta ExtraDelta LdBalHsS LdBalCeS LdBalBwS DlLdBalHs UlLdBalHs DlCdThdC DlCdThdR

HsdTrd
HsuTrd
wch
wch
wch
dWeight
uWeight
s
99Ps
0..100 %
0..100 %
0: Off
1: On
0: Off
1: On
0: Off
1: On
(1..100%)
step 1%
(1..100%)
step 1%
0..100 %
0..100 %
50
50
50
50
DlPwrThd
Cs
DlPwrThd
Cs4G
DlPwrThd
R99Ps
UlLdThdC UlLdThdC UlLdThdR DlLdHsTh UlLdHsTh CsHo4Mul

s
s4G
99Ps
dHsd
dHsu
RabSwch
0..100 %
0..100 %
0..100 %
0..100 %
0..100 %
0..100 %
0..100 %
0..100 %
0: Off
1: On
45
42
45
40
40
45
42
45
40
40
UtraUserN CoGsmUs GsmUserN GsmCelCa RrcDualCa HspaPlus

umOff
erNumOff umOff
riNum
rrSw
CapInd
[DBS_RR_
0..256
0..256
0..256
1..32
0: Off
HS-SCCH
MAX_HSP
1: On
Less
A_PLUS_
MIMO+HS
CAP]
DPA
DC+HSDP
0
0
0
4
0
0,1,2,3,4,5
A
64QAM
,6,7,8
MIMIO+HS
0
0
0
4
0
0,1,2,3,4,5
DPA DC
,6,7,8
MIMO+HS
DPA
64QAM
HSDPA
DC+HSDP
A 64QAM
MIMO
HSDPA
DC
HSDPA
64QAM
HSDPA
16QAM
RabHspaP
luBalSw[D
BS_RR_M
RabHspaP
AX_HSPA
luBalSw[0]
_PLUS_C
=0/1
AP] :
Switch
Off/On HS0,0,0,0,0,0
SCCH
,0,0,0
Less
0,0,0,0,0,0
Balance
,0,0,0
RabHspaP
luBalSw[1]
=0/1:
Switch
Off/On
MIMO +
HSDPA
DC+HSDP
A 64QAM
Balance
RabHspaP
luBalSw[2]
=0/1:
Switch
Off/On
MIMO +
HSDPA
DC
Balance
RabHspaP
luBalSw[3]
=0/1:
Switch
Off/On
MIMO +
HSDPA
64QAM
Balance
RabHspaP
luBalSw[4]
=0/1:
Switch
Off/On
HSDPA
DC+HSDP
A 64QAM
Balance
RabHspaP
luBalSw[5]
=0/1:
Switch
Off/On
MIMO
Balance
RabHspaP
luBalSw[6]
=0/1:
Switch
Off/On
HSDPA
DC
Balance
RabHspaP
luBalSw[7]
HoldHspa
PluBalSw[
DBS_RR_
HoldHspa
MAX_HSP
PluBalSw[
A_PLUS_
0]=0/1
CAP] :
Switch
Off/On HS0,0,0,0,0,0
SCCH
,0,0,0
Less
0,0,0,0,0,0
Balance
,0,0,0
HoldHspa
PluBalSw[
1]=0/1:
Switch
Off/On
MIMO +
HSDPA
DC+HSDP
A 64QAM
Balance
HoldHspa
PluBalSw[
2]=0/1:
Switch
Off/On
MIMO +
HSDPA
DC
Balance
HoldHspa
PluBalSw[
3]=0/1:
Switch
Off/On
MIMO +
HSDPA
64QAM
Balance
HoldHspa
PluBalSw[
4]=0/1:
Switch
Off/On
HSDPA
DC+HSDP
A 64QAM
Balance
HoldHspa
PluBalSw[
5]=0/1:
Switch
Off/On
MIMO
Balance
HoldHspa
PluBalSw[
6]=0/1:
Switch
Off/On
HSDPA
DC
Balance
HoldHspa
PluBalSw[
HspaPluB
alCapPri
[DBS_RR_
0..31
MAX_HSP
A_PLUS_
CAP]
29,27,25,2
0,15,11,8,5
,2
29,27,25,2
0,15,11,8,5
,2
DulCarBal DulCarBal
RscpThd EcNoThd
(-115..(-24..-0)db
25)dbm
Step 1db
Step 1dbm
-105
-13
-105
-13
ZTE
SceneId(C CelAvaSubCha PreamThs ConstVal
ellRadiusS
cene)
N/A
0
1
2
3
4
5
0: Available
subchannels of
cell are
nonconsecutiv
e
1: All
subchannels of
cell are
available
1
1
1
1
1
0
(-36.0..0.0) -35..dB Step

10Db
0.5dB
-21
-21
-21
-21
-21
-21
-21
-21
-21
-21
-21
-21
SceneId(C AichTranTime
ellRadiusS
cene)
0, 1
0
1
2
3
4
5
0
0
0
0
1
1
<>
1106 , 1106

ZXWR RNC V3!11!10 11 Radio Parameter Reference

Încărcat de

Informații document

Titlu original

Drepturi de autor

Formate disponibile

Partajați acest document

Partajați sau inserați document

Opțiuni de partajare

Vi se pare util acest document?

Este necorespunzător acest conținut?

Drepturi de autor:

Formate disponibile

ZXWR RNC V3!11!10 11 Radio Parameter Reference

Încărcat de

Drepturi de autor:

Formate disponibile

Operator

ZXWR RNC Radio Parameter

Managed object class the parameters belongs to.

ZTE Confidential Proprietary

Equipment Impaction Level

Service Impaction Level

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.423: "UTRAN Iur

CI; Cell Identity

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

EdchHarqCombC Cell Capability

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.433: "UTRAN Iub

maxNumFDDFre TS 25.331: "RRC

GsmBARangeNu maxNumGSMFre TS 25.331: "RRC

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

Local Cell ID;

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.423: "UTRAN Iur

TS 25.433: "UTRAN Iub

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

Assigned SubTS 25.331: "RRC

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

TS 25.433: "UTRAN Iub

RptTxRxTmDiffIn UE Rx-Tx time

TS 24.008: "Mobile radio

TS 24.008: "Mobile radio

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.433: "UTRAN Iub

Reporting Range TS 25.331: "RRC

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur

TS 25.423: "UTRAN Iur