Documente Academic
Documente Profesional
Documente Cultură
Content
Electric scooter overview
Safety instructions
E-scooter expansion
Folding
Basic operation
Riding
Maintenance
General Troubleshooting
Electric scooter parameter
Warranty
1. Handlebar
2. Clutch
3. Light and horn switch
4. Power cut-off brakes
5. LCD-880
6. T-tube
7. Stem quick release
8. Down tube
9. Light and horn
10. Safety mirror
11. Folding clasp
12. Charging port
13. Side stand
Safety instructions
Tips :
Correctly using and maintenance of the product can help you to obtain the best performance
and extend service life, so please take time to read this user manual carefully before riding.
The very first use of this product is recommended to continuous charging of 4-8 hours to achieve
optimum battery charge status.
This product is limited to one person, no carrying more people or objects simultaneously.
When riding this product, please wear helmets.
For the first time using, please adjust the height to the best position, so as to avoid injury or
damage.
Please practice in the flat open space, and ride the e-scooter after you are familiar with it.
Do not let go of one hand or both hands while riding, or you may get injury.
Do not turn off the power during riding.
Do not ride on the un-safety streets or streets that are not in accordance with rules.
Please keep your feet on the product when riding.
Never pass directly through the stairs higher than three-centimeter, barriers or ditches which are
wider than the size of the tire, in case you get hurt or cause damage to the product.
Please slow down and ride carefully when it comes to rough or uneven pavement.
Never ride on the ground with water, oil or ice, to prevent slipping and damage.
Do not let the product soak in water above 5 cm depth or directly by the water shot, so as not to
cause the motor or electric circuit breakdown.
Do not use this product at temperatures below -5 .
For long periods of not using, please charge at least one time within 30 days.
E-scooter expansion
1. Open the folded structure
Folding
1. Power off
5. Downward adjustment
T-tube
of
Basic Operations
Button functionAs picture 4 shows
When power off , quick press the ON/OFF button , After start up, quick press ON/OFF button
again, the interface switches between the ODO (total mileage), TRIP (single mileage), RM (residual
mileage), TM (run time), ERRO (fault code).
On the starting status, long press the ON/OFF button to turn off the power.
Long press ON/OFF button + MODE button to enter the mode setting. On the setting
interface, quick press ON/OFF button to switch the parameters.
Quick press MODE button to change the speed, the speed will change between SLO(slow)
MID( Medium) FAS (fast) or SLO (slow) FAS (fast) cycling.
Accelerator adjust the motor speed, the motor will speed up when press the accelerator; Let go of
hand and return the accelerator to normal position when slow down or stop.
Note: ERRO breakdown interface, when the sign is flashing, quick press ON/OFF button to
adjust the indicator to the ERRO, and the corresponding number means the detailed breakdown as
below:
ERRO 1: Motor breakdown
ERRO 2: Accelerator breakdown
ERRO 3: Controller breakdown
ERRO 4: Power cut-off breakdown
ERRO 5: Under-voltage protection
ERRO 6: Communication failure, the display can not receive the output from the controller
ERRO 7: Communication failure, the controller can not receive the output from the display
5
ERRO 5Under voltage protectioERRO 6 Communication failure, the instrument can not receive
the output of the controller
This brake lever control the rear wheel brake, so the user can slow down timely and safely.
Press the horn button (red one), the bell will ring; Press the light button (green one), the light
will be on which can light up the roads at nights.
6
Riding steps
Ready to start
1.Choose a flat and wide place.
2.Expand the e-scooter as mentioned above.
3.Adjust T-tube to a suitable height.
4.Fix the brake lever by using standard tools (As picture 5 shows
Lithium battery
Try to ensure the battery is fully charged, which will not cause any damage to it. Please charge the
battery at least once a month when not use for a long time. If not charge or use it for long time, the
battery will stop working and can not be charged again.
Charger
The intelligent charger has overcharge protection function. When the battery is charged 100%, it
will stop charge automatically.
Charging instruction
1. Firstly connect the charger with the charging hole of e-scooter.
2. Insert the charger plug into the general power socket.AC100-240V.Charger light becomes red
which means it start charging.
3. Charger light changes to blue that means the battery has been fully charged.
4. After fully charged, unplug the charger with the power connection, then unplug the connector
connected with the e-scooter.
7
*Please do not cover the charger and away from flammable objects while charging.
*Pleased do not put the charger on plastics, clothing and other combustible materials while
charging.
*Please do not touch the charging hole with metals (Such as keys, rings, etc.).
Maintenance
Lubrication
Please use little lubricating oil or lubricant on the clutch cover of folding handlebar every six
month.
Note: please do not use WD40 to lubricate the spare parts and front and rear wheels. If any question,
please consult the distributors.
Tire
This product use the honeycomb Hollow-free inflatable tires without the inner tube, which is
puncture protection .When the tires have obvious abrasion or rupture, you need to replace them ,and
only distributors can do the replacement.
Brake
If the brake performance is still poor after adjusting the brake cable or it is noisy when braking, then
you need to replace the brake pads from distributors.
Battery
This product is equipped with a lithium battery that can be recharged at least 600 times. The lithium
battery needs to be replaced if the range per fully charge is too short.
General troubleshooting
Check the list
Please check to see if the following actions have been completed or not when the product can not be
operated normally:
The power is on.
Power display indicates with power.
The brake lever is released.
All the plug and connector are clean and can be connected in the right way.
If the above actions are done but the product still does not operate normally, please consult the
distributors.
Specification
Performance
Battery
parameters
Motor
parameters
Charge
parameters
Model
Shuangye A1-H8
Dimensions(unfolded)
1000mm*120mm*540mm
Dimensions(folded)
1000mm*300mm*180mm
Net Weight
Max load
120kg
Max speed
25km/h or 30km/h
Climbing ability
10 degree
30km-40km
Battery type
Lithium battery
Nominal voltage
36V
Battery capacity
8.8AH/10AH/18AH
Motor type
Output rating
250W
1200r/min
Rated voltage
36V
9.5N.m
Input voltage
AC100-240V
Output current
2A
Charging time
4-5 hours
0.4KWH
Warranty
If the product has the following problems as below within the warranty period, distributors will
provide a complete after-service in scope of quality warranty.
Spare parts
Quality issue
Motor
1 year
Free
LCD-880
accelerator
1 year
Free
Controller
1 year
Free
Charger
1 year
Free
Lithium battery
1 year
Free
Scooter structure
1 year
Free
We are no responsible for the warranty if the malfunction or damage caused by below reasons
though the e-scooter is within the warranty period.
1.Not doing the appropriate maintenance according to the instruction manual.
2.The scooter is used for other performance as stunts or other dangerous action, which results in
product damage or failure.
3.Randomly disassemble or use other unoriginal spare parts, even modify the electric cables.
4.Wrongly used or traffic accidents or other collision damage.
5.Ride on abnormal streets resulting in damage or function failure.
6.Commercial lease or improper used.
7.Natural disasters with force majeure.
8.Do not let this product exposure to sunlight or place it outdoors for a long time, which may cause
rapid aging and dysfunction.
10