0 evaluări0% au considerat acest document util (0 voturi)
119 vizualizări1 pagină
This document summarizes the equipment included for a thermal oil heater project. It includes:
1) A Weishaupt dual fuel burner that can operate on gas or oil with automatic and modulating controls.
2) Additional components for the burner including valves, filters, regulators and piping.
3) Safety equipment such as valves, switches and pumps for the thermal oil system.
This document summarizes the equipment included for a thermal oil heater project. It includes:
1) A Weishaupt dual fuel burner that can operate on gas or oil with automatic and modulating controls.
2) Additional components for the burner including valves, filters, regulators and piping.
3) Safety equipment such as valves, switches and pumps for the thermal oil system.
This document summarizes the equipment included for a thermal oil heater project. It includes:
1) A Weishaupt dual fuel burner that can operate on gas or oil with automatic and modulating controls.
2) Additional components for the burner including valves, filters, regulators and piping.
3) Safety equipment such as valves, switches and pumps for the thermal oil system.
Vorpruefzeichung (drawing included) = 1 unit, Festigkeitsnachweis (stess calculation included) = 1 unit, Fischer levelswitch 10 NS90 = 1 unit, PT 100 sensor (for thermowell) = 3 unit, Emerto tubing 8 mm (with connectors) = 30 meter, Packing with foil (included) = 1. *Remarks : Heater with factory pressure test (interne Druckpruefung), Orifice plate (240 m3/h @ 0.3 bar), Headers (installed), Instrument bridge (supplied lose, not installed), Insulation 150 mm (excluded), Delivery (ex work, packed in foil). (no. OF = W 684/XII/15, no SO = 6021, no PO = 731/XII-BP/15) Weishaupt dual fuel burner type WM-GL30/3-A vers. ZM-R comlpleted pakage (included : gas train R2, Ratings range (nat. Gas) 600-5700 kW, Fully automatic oil side and gas side sliding two stage or modulating operation depending on type of ratings regulation depending on type of ratings regulation, Regulating rage gas side up to 1:6, Burners in monoblock constraction can be hinged open to the left or right, type of protection IP54, type tasted, type approval to EN 676 and 267, Comprising the following components : Flow favourable (compact housing for large ratings range and high flame stability), Integrated intake sound absorber for noise emission reduction in the boiler room, Nozzle assembly with spill-back nozzle and integral shut off device, Additional oil solenoid valve as additional safety device, Electomagnetic coupling, Air pressure switch (low gas pressure), Pressure adjustable gear type oil pump, Oil hoses, Electronic ignition unit, Pre-set mixing head with oil nozzles fitted, Weishauot electric motor with integrated star delta switching, Digital combustion manager for star sequence control, flame monitoring and valve proving as well as electronic compound regulation with stepping motor for gas butterfly, air regulator and oil regulator correcting elements, Input for fuel quantity determination (basic parameter pre-setting by factory), Display and operating unit (ABE) with single line digital display as well as e-Bus and modbus interface, All burner components are connected via plug, Gas valve train consisting of double gas valve class A, elbow and connecting parts). Complete with : Ball valve DN 40 = 1 unit, Filter set DN 40 = 1 unit, Reducing flange set DB 40/50 = 1 set, Gas pressure regulator type 5/1 with safety equipment, inlet and outlet pressure gauges completely assembled = 1 set, Screwed flange DN 50 Rp2 = 1 unit, Connection piecxes DN 50 = 1 unit, Axial compensator R2 = 1 unit, Bend long G4-2 = 1 unit. Complete with : Safety valve Fig 25.901 DN 25/40 = 1 unit, Globe Valve Fig 22.046 DN 20, PN 16 = 1 unit, Globe valve Fig 22.046 DN 150, PN 16 = 5 unit, Strainer Fig 22.050 DN 150, PN 16 = 2 unit, Difference pressure switch 21 D DS21 0-0.6 bar (connection 8 mm), Emerto stopp valve SRV 2x8 mm, PN 400 = 9 unit, T connection piece for ermeto valves = 3 unit, Temperature limiter type 701150/8-01-0253-2001-23/005, Allweiler pump type NTWH 100-250 mobitherm 605-240 m3/h - 85 m - 75 kw.