Documente Academic
Documente Profesional
Documente Cultură
Jigs & fixtures decrease the idle time - say true or false.
In __________________, location is made by two holes.
a) Flat locator
b) Wedge locator
c) Diamond pin Locator
d) V-Locator
In screw clamp large effort is required to clamp a work - say true or false.
Expand DOF_________________________.
Pin locators are used for longer and horizontal locations - say true or false.
____________________ is one of the lever clamps.
a) C-Washer
b) Swinging Clamp
c) Double-Acting Clamp
d) Heel clamp
_____________________ is used for checking the internal diameter of parts.
a) Plug Gauge
b) Ring Gauge
c) Snap Gauge
d) Profile Gauge
NO GO Limit corresponds to the maximum material condition - say true or false.
Taylors principle is used for designing _______________________.
In ________________________, the guide bush requires the periodic replacement.
a) Renewable Bushing b) Press Bushing
c) Slip Bushing
d) Liner Bushing
PART B
Answer all questions (Max. 40 words)
1.
2.
3.
4.
5.
2.
3.
6 x 4 = 24
1.
5 x 2 = 10
Define fixture.
Write down types of clamps.
What do you mean by mandrel ?
What are materials for limit gauges ?
What is fool proofing ?
PART C
Answer any six questions (Max. 100 words)
1.
2.
3.
4.
5.
6.
7.
10 x 1 = 10
2 x 8 = 16