Sunteți pe pagina 1din 3

ACCENT 202UD

Some of the most measured parameters in any process are temperature, pressure,
Ph, Humidity, Speed etc. Precise measurement and control of these parameters play
a very important role in overall process and quality optimization. Critical factors such as
process and reaction rates, raw material usage, and product specification, yield and
quality, can all be affected by the precision and frequency with which these parameters
are measured. Additionally they also strongly influence such diverse factors as
process and fuel efficiency, the effective recovery and use of solvents, and the life of
plant and equipments.
DIGITAL CONTROLLER Model 202-UD is a highly versatile and useful instrument.
The unit is provided with two setpoint with individual relay output as standard for control
application. The linearisationf or the thermocouple/rtd are done by the micro controller,
hence a high degree of accuracy. The controller accepts J, K, R, S type thermocouple,
Pt 100 Rtd, 1-5 Volt DC/4-20 mA and 0-5 Volt DC/0-20 mA inputs.cold junction
compensation for the thermocouple input and 3 wire cancellation for the Rtd type have
been done through software.
The controller has been manufactured using the best possible active and passive
components. The controller under goes a series of quality control checks to ensure
trouble free working for years and years. The front facia is sealed membrane type to
withstand dusty and humid environment. PCB soldered terminals are used on the back
plate to make the instrument rugged. Each set point has individual programmable
hysterisis and the relay output type can be configured by the user for ON ABOVE or
ON BELOW (fumace or Chiller application).

FEATURES :
Thermocouple, RTD,
Voltage or Current Input.
On/Off Control
Application.
Two independent
Set Points with
individual Hysterisis.
Dust Proof Membrane
front.
Easy to use membrane
Key Pad.
High Accuracy.
Micro Controller Based.

Technical Specifications
Model
Type
Display

202UD
MICROCONTROLLER BASED ON/OFF CONTROLLER
4 Digit, 0.56 seven segment LED display
Discrete LED's to Indicate the relay status
Input
Truly univeral input (Recalibration not required)
RTD Pt 100, 3 wire
Thermocouple types J K R S
(Automatic cold junction compensation For T/C)
0 - 5 V / 1 - 5 VDC
0-20 mA/4-20 mA DC
Input Range
RTD Pt 100
- 199.9 To 600
J Type
- 100 To 600
K Type
- 100 To 1372
R Type
0 To 1768
S Type
0 To 1768
0 - 5 V / 1 - 5 VDC
- 1999 To 9999
0-20 mA/4-20 mA DC (Field Scalable)
Accuracy
+/-0.25% of FS +/-1 Count
(For T/C and RTD Inputs)
+/-0.10% of FS +/-1 Count
(For mA and Voltage inputs)
Control Output
Two set points for individual relay output rated for 3 A @ 250 Vac
Individual hysteresis setting 0 to 100
Set point types are configurable to energize relay below or above
set point.
Calibration
Software calibration by front panel keyboard.
Protection
Fuse protected relay contact output.
Pass word protection against unauthorised data change.
Power Supply
110V or 230 V Ac, 50Hz (Factory set for any one)
Ambient
0 To 55 degree centigrade
Humidity
Upto 95% Rh non-condensing
Power Consumption Less than 10 VA
Environmental
Front facia IP 54
Protection
Enclosure IP 20
Dimentions
Bezel size 96x96 mm
Panel cutout 92x92 mm
Depth behind Panel 150 mm max
Terminals
Barrier terminals (suitable for upto 2.5 sqmm cable)
Enclosure
General purpose ABS plastic
Salient Features
Easy to use membrane keypads
User selectable input type
User programmable zero and span to protect against
accidental overshoots and undershoots
PCB soldered terminals on the back plate
Options
Single or Dual Relay
Transmitter Power Supply 24 V DC@ 30mA
Retransmission Output 4 - 20 mA
Cooling logic relay output ( For Compressor application)
Proportional control output
Flame Proof Housing

QUALITY PLAN

E X T E N D E D

Each instrument undergoes a quality


control check and relevent certificates
can be offered. The tests carried out
includes :-

All Instruments manufactured by us are


offered with an extended warranty for a
period of 18 months from the date of
despatch, subject to the terms and conditions
of the warranty as per the warranty card.
Our confidence in the product quality has
prompted us to offer an extended warranty.

Burn in test
Contactor test
Linearity stability/Accuracy
Isolations check

Power Variation test


Calibration
Bump test
Functional test

W A R R A N T Y

ORDERING INFORMATION
Model No

XXX XX XXX

XXX

202UD
SR
DR
Rtd
C
PC
T
PS
FLP

Description
Process Controller, Universal Input, 96 x 96
Single Relay
Dual Relay
Calibrated for Rtd 0 - 200.0
First Relay Cooling ( 3 min time delay for restart)
Proportional Control
Retransmission output 4 - 20 mA
Transmitter Power Supply 24 V DC
In FLP Enclsoure PFC/I13/12, 265 x 265mm, 4 PB

Our Product Range


Portable Temperature Indicators
Digital Process Indicator
Digital Process Indicator with alarm
Digital Process Controller
Large Display 1, 2.3 , 4 and above
Dual Channel Indicator / Controller
Controller with soak time application
Flow Indicator / Totaliser

Profile programmer
Digital scanner
Signal Isolator / Duplicator
Data Logger
Thermocouple
Thermowell
Rtd Pt 100 / Cu 53 / Pt 46 / Pt 500 / Pt 1000
Compensating Cable

Due to continuous development & innovations specification are subject to change without any notice.

Digital Controls
Regd. Office : 122, Kanchan Bag, INDORE - 452 001
Ph. : (0731) - 5066338,2514228, Fax : (0731) - 2510531
E-mail : digital@sancharnet.in, digicontrol2000@yahoo.co.in

S-ar putea să vă placă și