Documente Academic
Documente Profesional
Documente Cultură
SANDVIK CH420:01
Sign.
SANDVIK CH420:01
Copyright 2007 Sandvik SRP AB.
All rights reserved. No parts of this document may be reproduced or copied in any form or by
any means without written permission from Sandvik SRP AB. All data and information in this
manual may be changed without further notice. Reservations for misprints.
Document number: R 223.1327
Issue: 20071108
Version: 1
Sandvik
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 (0)40 409000, Fax: +46 (0)40 409260
www.sandvik.com
General
Ordering information
When ordering parts, always state the machine type, manufacturing number,
serial number and order number according to the identification plate on the
cone crusher or tank. State quantity, article number and denomination for
each ordered part. The quantities listed in this catalog show how many pieces
of each part that are usually exchanged in a certain position.
Crushers identification plate
The figure below shows an example of the crushers identification plate. The
identification plate contains data needed when contacting Sandvik
concerning wear parts.
Please enter the serial number of the associated machine in the intended field
on the first page of this wear part catalog (the copyright page).
Identification plate:
1 Machine type
2 Part number
3 Serial number
4 Order number
1 2
CH420-F/B/C-25/28/22:1
1
2
3
Identification plate:
1 Type
2 Part number
3 Serial number
4 Order number
Think ahead!
Avoid unnecessary downtime and increased freight charges by ordering parts
well in advance.
Feedback
If you have comments on this wear parts catalog or problems connected to
the crushers documentation, send an e-mail to: manuals.srp@sandvik.com
Feed hopper
1
5
4
Over-pressure system
12
10
1
2
3
4
5
6
7
8
9
10
11
12
13
Tank unit
Feed hopper
Spider cap
Head nut
Liners
Air filter
Support ring
Dust sealing
Bottomshell wearing
Step bearing set
Chevron packing
Hydroset
Over-pressure system
Tool list
11
1. Feed hopper
1
1
9, 10, 11
17
16
2, 3, 4, 5
Pos no
Qty
Part number
Alternative Description
442.9612-00
1
442.9574-00
Feed hopper
840.0049-00
845.0007-00
847.0002-00
847.0147-00
442.9598-00
442.9598-90
Feed distributer-LH
442.9597-01
Holder
840.0045-00
10
845.0007-00
11
847.0147-00
Pos no
Qty.
Part number
Alternative
Remarks
Each feed hopper distributer consists of:
Fasteners
Distribution parts:
Description
Remarks
442.9613-00
442.9574-00
Feed hopper
12
840.0049-00
13
845.0007-00
14
847.0002-00
15
847.0147-00
16
442.9575-00
17
442.9606-90
2. Spider cap
5650-0
5685-0,-2
5655-0,-2
5675-0
5150-0
5705-0
5651-0
Cat. no.
Qty.
Part number
5150-0
442.9568-00
Alternative
Arm shield
Description
5650-0
442.8362-01
Spider cap
5655-0
840.0067-00
5655-2
847.0120-00
5651-0
873.0831-00
5675-0
442.8363-01
Spider bushing
5685-0
840.0069-00
5685-2
847.0016-00
5705-0
442.8364-01
Remarks
3. Head nut
4205-0
4205-2
4025-0
4205-1
4135-0
Cat. no.
Qty.
Part number
Alternative
Description
4025-0
442.6140-01
Mainshaft sleeve
4205-0
442.6194-00
4205-1
442.6193-00
4205-2
442.6217-00
Burn ring
4135-0
855.0020-00
Retaining ring
Remarks
4. Liners
6006-0
6005-0
4175-0
Cat. no.
Qty.
Part number
Alternative
Description
4175-0
442.9698-01
02, -03
Mantle A
442.6197-01
02, -03
Mantle B
442.7000-01
-02
Mantle EF
442.9761-01
-02, -03
Mantle HC
442.9569-01
-02, -03
Concave ring EC
442.9587-01
-02
Concave ring C
442.9586-01
-02, -03
Concave ring M
442.9585-01
-02, -03
Concave ring MF
442.9584-01
-02, -03
Concave ring F
442.9583-01
-02
Concave ring EF
6005-0
6006-0
442.9596-01
Filler ring
6005-8
873.1112-00
6007-2
840.0070-00
6007-3
847.0016-00
Remarks
(Continued)
Concave
6005-0
Mantle
4175-0
Filler ring
6006-0
CH420-F/B/C-25/28/22:1
EC/A
EC extra coarse
442.9569-01 (M1)
442.9569-02 (M2)
442.9569-03 (M7)
EC/B
EC extra coarse
442.9569-01 (M1)
442.9569-02 (M2)
442.9569-03 (M7)
C course
C/A/C
C/B/C
M/A/C
M/B/C
M/HC/C
442.9698-01 (M1)
442.9698-02 (M2)
442.9698-03 (M7)
442.6197-01 (M1)
442.6197-02 (M2)
442.6197-03 (M7)
442.9587-01 (M1)
442.9587-02 (M2)
C course
B
442.9587-01 (M1)
442.9587-02 (M2)
M medium
MF medium fine
442.9585-01 (M1)
442.9585-02 (M2)
MF/HC/C
MF medium fine
442.9585-01 (M1)
442.9585-02 (M2)
HC
F fine
C course
C course
C course
442.9596-01
C course
442.9761-01 (M1)
442.9761-02 (M2)
442.9761-03 (M7)
442.9596-01
C course
442.9698-01 (M1)
442.9698-02 (M2)
442.9698-03 (M7)
442.9596-01
C course
442.6197-01 (M1)
442.6197-02 (M2)
442.6197-03 (M7)
HC
442.9584-01 (M1)
442.9584-02 (M2)
442.9584-03 (M7)
442.9596-01
C course
442.9761-01 (M1)
442.9761-02 (M2)
442.9761-03 (M7)
EF extra fine
442.9583-01 (M1)
442.9583-02 (M2)
442.9596-01
442.6197-01 (M1)
442.6197-02 (M2)
442.6197-03 (M7)
442.9584-01 (M1)
442.9584-02 (M2)
442.9584-03 (M7)
EF extra fine
442.9596-01
442.9698-01 (M1)
442.9698-02 (M2)
442.9698-03 (M7)
442.9584-01 (M1)
442.9584-02 (M2)
442.9584-03 (M7)
F fine
442.9596-01
442.9761-01 (M1)
442.9761-02 (M2)
442.9761-03 (M7)
MF/B/C
EF/EF/C
C course
HC
442.9586-01 (M1)
442.9586-02 (M2)
442.9586-03 (M7)
F fine
442.9596-01
442.6197-01 (M1)
442.6197-02 (M2)
442.6197-03 (M7)
F/HC/C
C course
B
442.9586-01 (M1)
442.9586-02 (M2)
442.9586-03 (M7)
M medium
442.9596-01
442.9698-01 (M1)
442.9698-02 (M2)
442.9698-03 (M7)
MF medium fine
442.9585-01 (M1)
442.9585-02 (M2)
F/B/C
C course
A
442.9586-01 (M1)
442.9586-02 (M2)
442.9586-03 (M7)
M medium
442.9596-01
442.6197-01 (M1)
442.6197-02 (M2)
442.6197-03 (M7)
MF/A/C
F/A/C
C course
442.9698-01 (M1)
442.9698-02 (M2)
442.9698-03 (M7)
442.9596-01
C course
442.7000-01 (M1)
442.7000-02 (M2)
442.9596-01
5. Air filter
(5650-1)
Cat. no.
Qty.
Part number
(5650-1)
5650-1
5650-2
5650-3
Alternative
Description
Remarks
912.0155-00
Filter complete
912.0114-00
900.0169-00
900.0002-00
6. Support ring
6020-1
6020-2
6020-8
6020-4
6020-0
6105-0 6050-0
10
Cat. no.
Qty.
Part number
Description
Remarks
6020-0
442.1093-01
Alternative
6020-1
845.0203-00
6020-2
442.9572-00
Sleeve
6020-4
442.9573-00
Washer
6020-8
48
863.0065-00
6050-0
442.9570-00
Support ring
6105-0
442.9571-00
Dowel pin
7. Dust sealing
4305-0
4350-0
4355-1
4365-1
4365-0,-2
4355-0
Cat. no.
Qty.
Part number
4305-0
442.6906-01
Alternative
Description
4350-0
442.6141-01
Retaining ring
4355-0
442.6931-01
Retainer
4355-1
442.6932-01
Scraper
4365-0
11
840.0046-00
4365-2
11
847.0147-00
4365-1
840.0048-00
Remarks
1320-2
1320-3
1320-4
1320-6
1320-5
1320-2
1320-3
1320-6
1320-4
Cat. no.
Qty.
Part number
1010-1
442.6174-01
Alternative
1320-1 1010-1
Description
Remarks
Arm liners
1010-2
442.6175-01
1320-1
442.8902-01
Wearing plates
1320-2
442.8903-01
1320-3
442.8904-01
1320-4
442.8905-01
1320-5
442.8906-01
1320-6
804.0003-00
1320-7
847.0059-00
1320-8
840.0047-00
11
Cat. no.
Qty.
Part number
Description
Remarks
4075-0
442.6138-01
Alternative
2280-0
442.6137-01
Step washer
2260-0
442.6139-01
2401-1
2305-0
2540-0 2540-1
12
Alternative
2055-0, -2
Cat. no.
Qty.
Part number
2055-0
840.0019-00
Description
Screw MC6S 8x12 8.8
2055-2
847.0012-00
2305-0
442.6153-00
Chevron packing
2401-0
841.0267-00
2540-0
873.0830-00
2540-1
873.1274-00
Remarks
11. Hydroset
1
4
2
Pos. no.
Qty.
Part number
Alternative
Description
Remarks
Main lubrication system
906.0142-00
Filter cartridge
912.0126-00
O-ring seal
912.0129-00
Filter cartridge
906.0373-00
Seat of seals
Pos. no.
Qty.
Part number
912.0139-00
Alternative
Description
Remarks
13
14
Qty.
Part number
Alternative
Description
Remarks
442.6637-00
442.6520-00
Lifting tool
Eccentric bushing
442.6640
Lifting tool
843.1330-00
Removal of piston
845.0012-00
442.9994-00
Holding piston
442.6340-00
Eye bolt
899.0132-00
899.0147-00
Dust collar
899.0155-00
899.0099-00
899.0244-00
Eccentric bushing
899.0243-00
Eye bolt LT M6
Mainshaft sleeve
920.0109-00
Screw M24
920.0151-00
920.0135-00
U-ring spanner NV 36 mm
920.0134-00
U-ring spanner NV 30 mm
920.0022-00
U-ring spanner NV 24 mm
920.0244-00
U-ring spanner NV 18 mm
920.0245-00
U-ring spanner NV 16 mm
920.0186-00
U-ring spanner NV 13 mm
920.0038-00
Screw 12
920.0037-00
Screw 10
920.0036-00
Screw 8
920.0035-00
920.0032-00
442.0800-90
Chunk of lead
923-0422-00
904.0585-00