Documente Academic
Documente Profesional
Documente Cultură
In the command window, type the following command and press Enter.
SFC /SCANNOW
Wait and do not use your computer until SFC tool checks and fixes the
corrupted system files or services.
When SFC tool finishes, reboot your computer and check if Windows Update
Service is listed and running.
1. Download according to your Windows version the two (2) text files
(WindowsXUpdateService.txt, WindowsXBitsService.txt) on your desktop.*
* Right-click on each filename and select Save As.
3. Navigate to your desktop and change the extension of the files you downloaded
from .txt to.reg. (e.g from "Windows7UpdateService.txt" to
"Windows7UpdateService.reg" & from "Windows7BitsService.txt" to
"Windows7BitsService.reg")
4. Double-click on WindowsXUpdateService.reg file and merge its information to
the registry.
4. Perform the same operation and merge the WindowsXBitsService.reg file into
the registry.
5. Restart your computer and check for updates again.
If, for some reason, you cant get the above command to work properly, you can
also try the command below, which is just a shortened version of it. If you can,
try to copy and paste because youll notice that after the = sign in several
locations, there is a space immediately after. Thats not by accident, you need
that space otherwise the command wont work.
sc create BITS binpath= c:\windows\system32\svchost.exe -k netsvcs start=
delayed-auto
Once the BITS service is installed, we need to make sure its registered properly.
If not, you can try to start it from the Services panel, but youll probably get an
error like:
Windows could not start the BITS service on the local computer. Error2: The
system cannot find the file specified
WUPS2.DLL /S
WUPS.DLL /S
WUAUENG.DLL /S
WUAPI.DLL /S
MUCLTUI.DLL /S
WUCLTUI.DLL /S
WUWEB.DLL /S
MUWEB.DLL /S
QMGR.DLL /S
QMGRPRXY.DLL /S
WUPS2.DLL /S
WUPS.DLL /S
WUAUENG.DLL /S
WUAPI.DLL /S
WUCLTUX.DLL /S
WUWEBV.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S
In notepad, click on File and then Save As. Name your file bits.bat and then
choose All Filesin the Save as Type box and save it to the desktop.
Now just right-click on the BAT file on your desktop and choose Run as
Administrator. At this point, you should then go ahead and restart your
computer and see if you can do what you were trying to do earlier, i.e install
updates, etc.
If BITS is still not showing up in the list of Windows Services or you cant start
the BITS service, then you can try and download this registry file and running it.
It basically tries to correct all the registry entries that are associated with the
BITS service. If the above commands did not work either, you can try running
this registry file and then try running the command again also. However, you
should first restart the PC after running the registry file.
http://download.bleepingcomputer.com/win-services/7/BITS.reg
Note that this is a .REG file, which adds keys and values to your registry. You
might get a message while downloading it saying that this file could be
dangerous, however, its not so you dont have to worry. If you get any error
message when trying to run this REG file, you can also restart your PC in Safe
Mode and then try to run it. Sometimes a running process will prevent some of
the values from being added to the registry.
If youre still having issues with the BITS service not showing up properly, let us
know what you tried and what your specific situation is and well try to help.
Enjoy!
If you don't have BITS service or cannot to run it,none of previous method
help...
Import BITSWin7.reg below fix for BITS service to registry.
Because for some subkeys Administrators defaultly don't have full control to workaround
this problem,import this fix from SYSTEM account
1.Download PsTools,extract from this psexec.exe file and put it
in C:\Windows\System32
2.Download my fix for BITS service and unpack it anywhere e.g on your desktop
3..Run cmd.exe with administrative previlliges (right click on cmd.exe and choose "run as
admin") and type:
psexec -s -i -d regedit
Now bsnl customers can change their land phone plan online using bsnl self
care portal int this post you can see step wise procedure to change your
landphone connection.
>> Go to >http://selfcare.edc.bsnl.co.in/ for Eastern India
>http://selfcare.wdc.bsnl.co.in/ for Western India
>http://selfcare.ndc.bsnl.co.in/ for Northern India
>http://selfcare.sdc.bsnl.co.in/ for Southern India
>> Register if you don't have an account
>>Sign in using your registered user name and password.
Method - 2 :
Repair Windows Registry File Association Utility
Steps:
1. Download this file association utility from : Repair .lnk (Shortcuts) File Association
2. Double Click on the Downloaded file
3. Click on the Start Button
4. Once this process completes - Re-start the system - It will Fix the Issue.
Method - 3 :
Manual Method to Restore the Windows Registry
Steps:
1. Go to Start Menu > type regedit in the Start Search Box and press ENTER.
2. Browse to the following registry branch:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Expl
orer\FileExts\.lnk
3. Click on the arrow to expand it and delete the sub-key named UserChoice.
4. Exit from Registry Editor and reboot your machine.
5. Hope it gets fixed.
Method - 4 :
Run this Anti-Malware Programs to Restore the Windows Registry if none of
the above works
Download and Run 1 [Don't change Default settings while Running this
program | Only Select 'On-Demand Scanner'] :
Free Anti-Malware Detection & Removal Software
Re-start / Re-boot your system.
Download and Run 2 :
Downloads - SurfRight
Note: Watch Video - to Run this Program if you're facing problem.
It will take few seconds to recover all your files, Now open your Flash Drive you will get
Back all of your files.
This will remove Shortcut Virus from your Computer, if not then try these steps.
1. Press windows + R key, you will get Run box, type %temp% here and hit OK, now
temp folder will be open look for file nkvasyoxww.vbs and delete it.
2. Go
to C:\Users\<username>\AppData\Roaming\Microsoft\Windows\Start
Menu\Programs\Startup. Check Startup folder if nkvasyoxww.vbs exist here then delete
it.
3. Press Windows + R key, type msconfing into the run dialog box and hit OK, it will
open System Configuration, Go to Startup tab, and look for nkvasyoxww.vbs uncheck it
from startup and hit OK.
There may be a different name for the VBS file, just make sure you dont have any file with
an unusual name and VBS extension at the startup, registry, and temp folder.
In Windows 8, Open Task Manager and go to Startup tab, disable nkvasyoxww.vbs from
here.
If your computer files was already converted into the shortcut, then you should try
command prompt same as above method.
> Type: attrib -h -r -s /s /d <Your drive letter>: \*.* (For example: If your drive is C: then
the command is attrib -h -r -s /s /d C:\*.*)
OR
with your USB drive's letter. For example, if your USB drive's letter is E, (BEST work)
type attrib -h -r -s /s /d E:\*.* and press Enter .[1] (works)
There's this virus that creates shortcuts of every folder on every drive. If its the one you're
facing, go about it this way.
You don't need an antivirus
I noticed on windows, it creates a process which you can find and stop from the
task manager. In my case, the process is called autoit3. Find it and stop it.
find it and
delete it.
Now, on every partition of the hardisk, it created another folder called skypee
that contain its files. They may not be visible but they're there, so you type the
folder name in the address bar to access the folders and delete there contents.
Eg on local disk D, you would type "D\skypee\
To find all occurances of skypee program and make sure its removed absolutely,
you need to edit the registry. Caution here. Access the registry by running
regedit. exe in run. Once there click Ctrl + F to search. Now search for "autoit3"
and delete its every occurance.
You're done. To delete the harmless shortcuts, search for all .lnk files in the
explorer search bar and delete them. Your computer is now free of the virus.
00,01,00,00,00,60,ea,00,00,01,00,00,00,c0,d4,01,00,00,00,00,00,00,00,
00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Para
meters]
"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6
f,00,6f,\
00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,
5c,00,\
71,00,6d,00,67,00,72,00,2e,00,64,00,6c,00,6c,00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Perfor
mance]
"Library"="bitsperf.dll"
"Open"="PerfMon_Open"
"Collect"="PerfMon_Collect"
"Close"="PerfMon_Close"
"InstallType"=dword:00000001
"PerfIniFile"="bitsctrs.ini"
"First Counter"=dword:000007d2
"Last Counter"=dword:000007e2
"First Help"=dword:000007d3
"Last Help"=dword:000007e3
"Object List"="2002"
"PerfMMFileName"="Global\\MMF_BITS_s"
"1008"=hex(b):53,1d,58,60,35,ee,cc,01
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BITS\Securi
ty]
"Security"=hex:01,00,14,80,90,00,00,00,a0,00,00,00,14,00,00,00,34,00
,00,00,02,\
00,20,00,01,00,00,00,02,c0,18,00,00,00,0c,00,01,02,00,00,00,00,00,05,
20,00,\
00,00,20,02,00,00,02,00,5c,00,04,00,00,00,00,02,14,00,ff,01,0f,00,01,0
1,00,\
00,00,00,00,05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,0
0,05,\
20,00,00,00,20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00
,05,04,\
00,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00
,01,02,\
00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,00,00,00,00,00,05,20
,00,00,\
00,20,02,00,00
b) Now, click on File and then Save as.
c) Next to the File Name, type BITS.txt (without the quotations) and click
on Save.
d) Now, go to the saved location and Right Click on the saved file and select
Rename.
e) Rename the file to BITS.reg (without the quotations) and hit Enter.
f) If prompted, select Ok or Yes.
g) Double click on the file and incorporate it into the registry.
To run System File Checker (Windows XP, Vista, 7, 8, and 10):
Click the Start button.
Type "command" in the search box... DO NOT hit ENTER yet!
While holding CTRL-Shift on your keyboard, hit ENTER.
You will be prompted with a permission dialog box.
Click Yes.
A black box will open with a blinking cursor.
Type "sfc /scannow" and hit ENTER.
System File Checker will begin scanning for wuauserv.dll and other system file problems (be
patient - the system scan may take a while).
9.
Follow the on-screen commands.
1.
2.
3.
4.
5.
6.
7.
8.
Option 1:
Go to Start>Run
Type regsvr32 wuaueng.dll
Click on OK wait a few seconds, then click on OK in the RegSvr32
dialog box.
Try to install the updates again. If you can install the updates, delete the Repair.bat file. To
do this, right-click Repair.bat, click Delete, and then click Yes.
Please follow all the steps and if the issue persists, revert back and we will be glad to help
you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/error-when-runningdism-online-cleanup-image/f9fffd60-85ff-448d-b95e-b03ed95cc4b3
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/dismexeonline-cleanup-image-restore-health-failed/668ef107-5f4c-4959-ba93-76d052452315
https://technet.microsoft.com/en-us/library/hh825020.aspx
If the service is not installed or will not start, or you still get an error, find another
computer running the same operating system, version, and language as yours.
1. Log onto this second system with administrative credentials.
2. WIN+R, regedit [enter].
3. Browse the registry to
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TrustedIns
taller.
4. Right-click the subkey, click Export, and save the file as
trustedinstaller.reg.
5. Copy this file to the problem computer.
6. Double-click the reg file on the problem computer and click Yes to
merge the file with the registry.
7. Reboot.
8. Try running Windows Update again.
If this still does not resolve the issue, you can restore the binary file.
1. On the second system, browse to the c:\windows\servicing directory.
2. Copy TrustedInstaller.exe to the problem computers desktop.
3. On the problem computer, move the TrustedInstaller.exe file to the
c:\windows\servicing directory. If that errors, make sure you have Full
Control rights to the folder. At an administrative cmd prompt, you can
use these two commands.
takeown /f c:\windows\servicing icacls c:\windows\servicing /grant administrators:F
4. After you have replaced the binary on the problem computer, reboot.
5. Try running Windows Update again.
Error 0x80070424 from the winerror.h file indicates The specified service does not
exist as an installed service. If you encounter this error doing things that do not
involve security components of Windows, it is an indication that some other service
that your action depends upon is stopped, missing, or corrupt. Check the appropriate
service(s) to confirm they are enabled and functional.
Windows Vista, Windows Server 2008, Windows 7
1.
Examine the Windowsupdate.log file for error messages, To view the log
file, follow these steps:
a.
b.
2.