Documente Academic
Documente Profesional
Documente Cultură
BEB11203
SUBJECT TITLE
ELECTRONICS I
LEVEL
DEGREE
TIME / DURATION
:
( 2 HOURS )
DATE
:
INSTRUCTIONS TO CANDIDATES
CONFIDENTIAL
Group
No of Student
Tutor
LO1TO1
24
MTM
LO1TO2
26
MTM
LO2TO1
24
MTM
LO2TO2
21
MTM
LO3TO1
22
HMN
LO3TO2
11
HMN
Total
128
2
Date:
Verified by
Head of Section
Signature
Date
IEB
Signature
Date
CONFIDENTIAL
PART A
Question 1
a) An amplifier has an open loop voltage gain of 5000. Determine the feedback
factor required to reduce the voltage gain to 1000.
[4 marks]
b) The gain of an operational amplifier is 8000 before 8% of its output is applied
with negative feedback. Calculate the percentage of reduction in the feedback
gain of the op amp if the open circuit loop gain reduces by 50% due to aging.
[10 marks]
c) For a Wein Bridge Oscillator to oscillate at a frequency of 5 kHz;
i. Calculate the resistance, R for it positive feedback networks if the
capacitance value is 0.01F.
ii. Determine the value of Rf and Rin to ensure oscillation.
[4 marks]
[4 marks]
iii. Draw and label the circuit diagram of the designed oscillator.
[3 marks]
Question 2
a) List FIVE (5) characteristics of an ideal op amp.
[5 marks]
two pole low pass active filter and frequency response curve.
ii.
one pole high pass active filter and frequency response curve.
[4 marks]
CONFIDENTIAL
d) Design a Band Pass Filter with the following specifications:
.
PART B
Question 1
The input signal to a 40dB amplifier is 30 W. The amplifier itself produces
additional 15 nW of internal noise. The input signal to noise ratio is 50 dB, calculate:
i)
[5 marks]
ii)
[5 marks]
iii)
[5 marks]
iv)
[5 marks]
v)
[5 marks]
Question 2
a) The input impedance to a common emitter transistor amplifier is 3.6 k with =
100, ro = 60k, RL = 1.7 k. Determine:
i.
re
ii.
Ib when Vi = 30mV
iii.
Ic
iv.
Ai
v.
Av
[10 marks]
CONFIDENTIAL
a) re
[5 marks]
b) Input impedance, Zi
[2 marks]
c) Output impedance, Zo
[3 marks]
d) Voltage gain, Av
[3 marks]
[2 marks]
Figure 1
Question 3
Referring to Figure 2, given RB = 2k, RC = 30 , VCC = 20V, = 45. Determine:
i. The input power, Pin(dc) .
[5marks]
[5marks]
[5marks]
[5marks]
[5marks]
CONFIDENTIAL
Figure 2