Documente Academic
Documente Profesional
Documente Cultură
Easy-Mix RK-7100
Processing
WEICON Easy-Mix products can be processed directly from the double
cartridges with the help of the included static mixer. Reject the first 5
cm of the dosed bead. Apply adhesive to only one of the surfaces to be
bonded.
The pot life given is for a material quantity of 10 ml at room
temperature. If larger quantities are used, the curing time will be faster.
Similarly, higher ambient temperatures shorten the cure times (as a
rule of thumb, every +10C increase above room temperature will halve
working and curing time). Temperatures below +16C will extend
working and curing times considerably, while below about +5C, no
reaction will take place at all.
fast-curing
high strength
impact resistant, residual elasticity
WEICON Easy-Mix RK-7100 can be used to bond numerous materials
such as plastics, metals, wood and ceramics to themselves and
among. It is particularly convenient for structural bondings if
high-strength connections are required. The adhesive is very viscous
and is therefore suitable also for applications on vertical surfaces.
Storage
The shelf life is 12 months when stored unopened at a normal climate
(+23C and 50 % rel. humidity).
Note
WEICON Easy-Mix RK-7100 can be used universally and, for example,
in plastics technology, metal construction, car body and vehicle
construction, machine construction, electrical engineering, model and
mould making and in trade show and exhibition construction.
Technical data
Basis
Methyl methacrylate
1:1
creamwhite, milky
approx. 5 min.
approx. 25 min.
approx. 60 min.
approx. 12 hours
0,1 - 5,0 mm
20 - 25
on GRP
GRP 8 N/mm
on PVC
PVC 21 N/mm
on Aluminium
24 N/mm
on Steel bright
23 N/mm
on Stainless steel
15 N/mm
on PMMA
23 N/mm
75
22 N/mm
30 %
-55 up to +125 C
Accessory
Accessory