Documente Academic
Documente Profesional
Documente Cultură
Description
The CV-98 cylinder is factory filled with carbon dioxide. A
single cylinder may be used or multiple cylinders can be
manifolded together to obtain the required quantity of agent
for total flooding or local application methods. The CV-98
cylinder can be actuated electrically, pneumatically, and/or
manually with approved valve actuation components.
Note: Operational temperature range of 0-130 F
(17.8-54.4 C).
Component
Material
Thread Size/Type
Cylinder
Steel
CV-98 Valve
Brass
Valve/Tank
Assembly
Protective
Shipping Cap
Shipping
Assembly
Part No.
Approximate Weight
lb
(kg)
Dimension A
in.
(mm)
Dimension B
in.
(mm)
(34.0)
(45.4)
(45.4)
(54.4)
215
286
286
390
(97.5)
(129.7)
(129.7)
(176.9)
57 3/4
60 1/4
60 1/4
66 5/8
(1467)
(1530)
(1530)
(1692)
9 1/4
10 3/4
10 1/2
11
(235)
(273)
(268)
(279)
(15.9)
(22.7)
(34.0)
(45.4)
(54.4)
110
155
215
255
342
(49.9)
(70.3)
(97.5)
(115.7)
(155.1)
35 3/4
52 3/4
57 3/4
60 1/4
66 5/8
(908)
(1340)
(1467)
(1530)
(1692)
8 1/2
8 1/2
9 1/4
10 1/2
11
(216)
(216)
(235)
(268)
(279)
Weight of CO2
lb
(kg)
75
100
100
120
35
50
75
100
120
1-1
1.125-18 THREADED
FOR RELEASE
ATTACHMENTS OR
SHIPPING CAP
CV-98 VALVE
RECORD TAG
A
HEIGHT
TO
OUTLET
001416
001816
Note: Use Flexible Discharge Bend (Part No. 427082) when attaching valve to supply pipe or manifold.
System Components
Description
The CV-98 valve Flexible Discharge Bend (Part No. 427082)
is a 5/8 in. (1.59 cm) I.D. extra-heavy flexible hose which
connects the valve discharge outlet to the fixed piping or
header manifold. The discharge bend has a female 1 5/1612-UN-3B thread for connecting to the valve outlet and a
male 1/2 in. NPT thread for connecting to the fixed piping or
manifold. The discharge bend will withstand a pressure of
9000 psi (621 bar). Its flexible connection allows for easy
alignment of multiple cylinder banks to fixed piping. Each
bend has a built-in check valve that prevents loss of agent
should the system discharge while any cylinder is removed.
Shipping Assembly
Part No.
Description
427082
42430
Material
Valve End
Manifold End
Approvals
SAE 100 R2
Type AT
1 5/16-12-UN-3B
Female
18 7/8 IN.
(47.9 cm)
FEMALE ADAPTOR
(THREAD 1 5/16 IN.-12N-3)
(BRASS UNS C-36000)
CHECK
MANIFOLD END
VALVE END
007514
1-2
TYCO FIRE PROTECTION PRODUCTS
ONE STANTON STREET
MARINETTE, WI 54143-2542
715-735-7411
System Components
Description
The manual lever release actuator provides a manual
means of actuating cylinder valves and selector valves. This
can be accomplished by direct manual actuation of its pull
lever or cable actuation when used in conjunction with a
remote manual pull station. When used with a remote
manual pull station, the pull station must contain the
components necessary to meet the actuator lever traveling
requirements of 7 in. (178 mm) and not exceed 40 lb
(18 kg) to operate.
The actuator is shipped with ring pin and chain attached. If
the ring pin is not required, it must be removed. Failure to
remove the ring pin/chain assembly will prevent system
actuation if a remote cable pull actuation system is
employed and the ring pin is accidentally installed in the
actuator.
Three actuators are available. Each is designed for a
specific component.
Component
Material
Approvals
All Manual
Cable-pull
Actuators
Brass with
Stainless
Steel Pin
Shipping
Assembly
Part No.
Description
423309
70846
427207
3 7/8 IN.*
(9.8 cm)
PIN
3 7/8 IN.
(9.8 cm)
000897
1-8
TYCO FIRE PROTECTION PRODUCTS
ONE STANTON STREET
MARINETTE, WI 54143-2542
715-735-7411
System Components
Description
The baffle type nozzle is used in total flood applications
only. Placed around the outside edge or placed near the
ceiling approximately 15 to 20 ft (4.6 to 6.1 m) on centers in
a room or any enclosed space, each nozzle provides a
180 fan spray of CO2, spreading the extinguishing gas
quickly and efficiently throughout the protected space.
Component
Material
Nozzle:
Strainer:
Baffle Type
Baffle Type BL
Thread Size/Type
Orifice Size
Approvals
1 through 3
UL (EX-2968);
Listed for use with
FM Approved systems
Brass
3.5 through 14
UL (EX-2968);
Listed for use with
FM Approved systems
Brass
9 through 16
UL (EX-2968);
Listed for use with
FM Approved systems
Brass
Monel
1-18
Baffle Type Nozzle With or Without Strainer (Baffle Type with Strainer)
STRAINER
FORGED
BRASS BODY
DISCHARGE ORIFICE
ORIFICE SIZE STAMPED
ON THIS SURFACE
2 5/8 IN.
(6.6 cm)
000662a
1 3/4 IN.
(4.4 cm)
000662b
Shipping Assembly
Part No.
Description
Orifice Code
426119
426120
13
3.5 14
3 5/16 IN.
(84 cm)
3 1/4 IN.
(8.2 cm)
DISCHARGE ORIFICE
STAMPED
NOZZLE CODE
FORGED
BRASS BODY
000664a
000664b
2 1/4 IN.
(5.7 cm)
Shipping Assembly
Part No.
Description
Orifice Code
426121
9 16
System Components
Cylinder Bracketing
Description
The cylinder bracketing is designed to rigidly support the
installed carbon dioxide cylinders. The bracketing components are constructed of heavy structual steel. Bracket
assemblies are available in modules for two to six cylinders
and can also be mated together for any combination over
six. Bracketing can be assembled to support single row,
double row or back-to-back rows of cylinders. Bracketing
uprights and weigh rail supports are also available for
weighing cylinders in place. Bracketing components are
painted with a red enamel coating. Uprights and back
frame assemblies can be bolted (fasteners are not
included) or welded together, which ever makes the installation more convenient. For weighing cylinders, a scale and
lifting yoke is also available.
Refer to the Installation and Appendix sections of the
Design manual for further details.
Component
Material
Finish
Approvals
Bracketing
Steel
Red
Paint
UL (EX-2968);
Listed for use with
FM Approved systems
Shipping Assembly
Part No.
Description
45120
45244
45121
45261
45122
45245
427704
427705
79638
79639
79640
79641
79642
73257
426592
73553
73554
73555
73556
73256
79413
73250
73251
73252
418502
73253
73254
73255
418503
73266
73267
73268
73269
73270
Shipping Assembly
Part No.
Description
73091
73092
71683
71682
71684
74241
69877
WEIGH RAIL
SUPPORT
UPRIGHT
WEIGH RAIL
BACK FRAME
CYLINDER
CLAMP
CARRIAGE BOLT
WITH NUT
RIGHT
BRACKET FOOT
0001838
System Components
Connecting Link
Description
The connecting link is used to connect two lever releases
together when two pilot cylinders are required for actuation.
The connecting link can be used on lever releases installed
on CV-98 ANSUL carbon dioxide valves.
Shipping Assembly
Part No.
Description
42514
Connecting link
Material
Paint
Approvals
Connecting Link
Steel
Red Enamel
UL (EX-2968)
PIVOT PIN
2 5/16 IN.
(5.87 cm)
3/4 IN.
(19 mm)
007978
001885
1-24
TYCO FIRE PROTECTION PRODUCTS
ONE STANTON STREET
MARINETTE, WI 54143-2542
715-735-7411
System Components
Description
The 1/16 in. diameter cable is used to attach remote manual
pull boxes to cylinder valves, pull equalizers, control boxes
and selector valves. The cable is constructed of stranded,
stainless steel wire. The cable is available in lengths of 50,
100, 150, and 200 ft (15.2, 30.5, 45.7, and 60.9 m). The
cable assemblies include a brass swaged end fitting for
attaching to the remote pull box.
Component
Material
Approvals
Cable
Assembly
UL (EX-2968);
Listed for
use with
FM Approved
systems
Shipping Assembly
Part No.
Description
42104
42109
42113
42128
50 ft (15.2 m) 1/16 in. (0.16 cm) cable with swaged end fitting
100 ft (30.5 m) 1/16 in. (0.16 cm) cable with swaged end fitting
150 ft (45.7 m) 1/16 in. (0.16 cm) cable with swaged end fitting
200 ft (60.9 m) 1/16 in. (0.16 cm) cable with swaged end fitting
HANDLE
SLOT IN COUPLING FOR INSTALLATION
OF CABLE END FITTING
CABLE END
(BRASS)
000689a
COUPLING
000689b
Note: The strength of the end fitting exceeds the breaking point of the cable.
1-27
TYCO FIRE PROTECTION PRODUCTS
ONE STANTON STREET
MARINETTE, WI 54143-2542
715-735-7411
System Components
Corner Pulley
Description
The corner pulley is required on a carbon dioxide system
whenever a mechanical release pull cable run involves a
change in direction. Corner pulleys are installed as part of
the cable housing (pipe or conduit) and provide 90 direction changes with minimal force loss and no induced
kinking.
Two types of corner pulleys are available. One is made of
die cast aluminum, has a ball bearing roller, and uses
compression fittings for 1/2 in. EMT connections.
Component
Material
Thread Size/Type
Approvals
Corner Pulley
Body:
Aluminum
Roller:
Stainless
Steel
UL (EX-2968);
Listed for use with FM Approved systems
Corner Pulley
Body:
Brass
Wheel:
Brass
UL (EX-2968);
Listed for use with FM Approved systems
Corner Pulley
Body:
Brass
Wheel:
Nylon
UL (EX-2968);
Listed for use with FM Approved systems
Shipping Assembly
Part No.
Description
423250
45515
40696
42678
1-27.1
1 5/32 IN.
(2.9 cm)
COVER
1 1/8 IN.
(2.8 cm)
4 3/16 IN.
(10.6 cm)
LEAD-CLAD
COPPER
GASKET
RIGHT AND LEFT HAND ADAPTOR
SUPPLIED WHEN REQUIRED
000690a
BODY
2 7/8 IN.
(7.3 cm)
GLAND
2 7/8 IN.
(7.3 cm)
000690b
001815b
001815c
System Components
Description
The pull box on a carbon dioxide system is used to provide
mechanical release of the system or directional valve from
a manually operated remote station. Two types of pull boxes
are available. The latched door type has a solid cast brass
door which must be opened to reach the pull handle. The
second type has a break glass window and a spring
mounted handle which rotates forward for use when the
glass is broken. A 3/8 in. female NPT opening is provided at
the back of each enclosure for connection of the cable
housing. Both types are painted red.
A pulley elbow may be attached directly to the back of the
pull box, if necessary, to provide immediate changes in pull
cable direction. With this option, the pull box can be
extended an additional 3 1/2 in. from the mounting surface
by using support legs attached to the back of the pull box
(one set for latched door type, two sets for break-glass
type).
Component
Material
Approvals
Latch door
pull box
Brass
UL (EX-2968);
Listed for use with
FM Approved systems
Break glass
window pull box
Brass
UL (EX-2968);
Listed for use with FM
Approved systems
Shipping Assembly
Part No.
Description
45062
41527
41542
40209
KNOB TO
OPEN PULL
BOX DOOR
4 3/16 IN.
(10.6 cm)
HINGED
DOOR (CAST
BRONZE
PAINTED RED)
MOISTURE-PROOF
JOINT
3/4 IN. NPT
PULL
HANDLE
(BRASS)
STAINLESS
STEEL PULL
CABLE
3/8 IN. PIPE
FOR ENCLOSING
PULL CABLE
FOR FIRE
OPEN DOOR
4 1/8 IN.
(10.4 cm)
1 7/16 IN.
(3.7 cm)
BODY (CAST
BRONZE
PAINTED RED)
1 15/16 IN.
(4.9 cm)
000684a
000684b
1-29.1
2 13/16 IN.
(7.1 cm)
3 1/4 IN.
(8.2 cm)
SPRING FORCES
HANDLE OUT INTO
OPERATING
POSITION WHEN
GLASS IS BROKEN
4 3/16 IN.
MOUNTING
HOLES
MOISTURE
PROOF JOINT
PULL
HANDLE
4 7/8 IN.
(12.3 cm)
GLASS FRONT
CAST BRASS
HINGED COVER
(PAINTED RED)
PROTECTED HAZARD
ENGRAVED IN
NAMEPLATE (SPECIFY)
3 IN.
(7.6 cm)
IN CASE OF FIRE
BREAK GLASS AND
PULL HANDLE HARD
UNTIL RED PAINT
MARK ON CABLE
SHOWS
000676b
000676a
BRASS HAMMER
AND CHAIN
SECURED
TO BOX
System Components
Description
The time delay is activated by pressure from the pilot cylinders when they are released. After discharge is completed,
the time delay can be returned to service by following the
procedure in the Resetting and Recharge section of the
ANSUL Carbon Dioxide Design, Installation, Recharge and
Maintenance Manual. The length of time is factory set and is
not adjustable. A manual release is incorporated on the time
delay valve to allow instant override of the time delay. The
time delay is available in delay settings of 10, 30, 68, and 88
seconds.
Component
Material
Thread Size/Type
Approvals
Valve:
Brass
Accumulator: Steel
Booster:
Brass
Shipping Assembly
Part No.
Description
437715
437716
437717
437718
423423
1-31
8 1/2 IN.
(21.6 cm)
2 3/4 IN.
(7 cm)
7 1/4 IN.
(18.4 cm)
7 3/4 IN.
(19.7 cm)
9 7/8 IN.
(25.1 cm)
7 5/16 IN.
(18.6 cm)
15 1/2 IN.
(39.4 cm)
12 7/8 IN.
(32.7 cm)
008608
System Components
Description
The Stainless Steel Actuation Hose is used to connect the
actuation line flared tees between each agent tank. The
hose has the same thread, 7/16-20, as the flared tees. The
actuation hose allows flexibility between the rigid actuation
piping and the tank valve.
Actuation Components
7/16 20
J.I.C.
006385
Description
31809
32335
32336
73596
73597
73598
415142
430815
7/16-20
7/16-20
000433
Description
_________
CV-98 Actuation Adapter
32338
32334
Male Elbow
(7/16-20 JIC x 1/8 in. NPT)
31810
418359
31811
1-44
TYCO FIRE PROTECTION PRODUCTS
ONE STANTON STREET
MARINETTE, WI 54143-2542
715-735-7411