Documente Academic
Documente Profesional
Documente Cultură
net
SHARP
MX-M850
MX-M950
MX-M1100
WWW.SERVICE-MANUAL.NET
30.04.2008
Handy Guide
Information contained within this guide is subject to change without prior notice.
This Handy Guide is not a substitute for the official Sharp Service manuals.
It is for use by Sharp qualified service technicians with the intention of improving
the efficiency of Sharp MFP Devices.
All the latest fault finding information, firmware and printer drivers
can be found on the SHARP Support Website
Notice:
This document has been adapted for use in the UK market with the kind
permission of Sharp Corporation of Australia PTY Ltd.
www.tech.sharp.co.uk
http://dse-pub.sharp.co.jp/key/
User Name:
Password:
keyuser
key000323
WWW.SERVICE-MANUAL.NET
Handy Guide
May 2008
Page
Machine Specification
Option Specification
Machine Options
Consumables
10
12
15
Maintenance
16
Parts Compatibility
21
10
22
11
Firmware Upgrade
24
12
28
13
Test Simulations
29
14
Trouble Codes
34
15
39
16
Sensor Location
42
17
45
18
Repair Hints
51
19
Notes
53
WWW.SERVICE-MANUAL.NET
Updated
Updated
Updated
Updated
Updated
Machine Specification
MX-M850
MX-M950
MX-M1100
General
Type:
Original Paper Size:
Printed Paper Size:
Standard Paper Capacity:
Maximum Paper Capacity:
Paper Weight:
Output Capacity:
Warm-up Time:
Memory/HDD:
Duplex:
Max. Power Consumption:
Dimensions (W-D-H):
Weight:
Life:
Monthly Volume:
Console
Max. A3
Max. A3W Min. A5R
3000 sheets: (800+1200) + 2x500 sheets
8050 sheets: (800+1200) + 2x500 + (1000+1000+2550) + 500 sheets
Tray 1& 2: 60-105 g/m2 Tray 3 &4 : 60-205 g/m2
Refer to Output [Finisher] Specification
Less than 240 sec.
Local 512+256MB + System 512MB + 80 GB HDD (STD)
(Max). Local 768+768MB + System memory 1024MB + 80 GB HDD
Std (60-205 g/m2 (Std: A3W-A5R, SRA3 only with MXLCX5)
2.44KW
2.99KW
2.99KW
1301 x 771 x 1518 (Including touch panel)
Approx 300kg
24000K or 5 years
50-200K (Max. 500k) 100-250K (Max. 500k) 150-300K (Max. 500k)
Power Source
Voltage / Current:
Breaker Capacity
Frequency:
220-240V 8A +
220-240V 2.5A
16A
50/60Hz
220-240V 13A
220-240V 13A
16A
50/60Hz
16A
50/60Hz
Copier
Copy Speed (A4 Cont):
E-Sort:
First Copy Time (OC):
Continuous Copy:
Scan Resolution:
Zoom Range:
Tandem Copy:
85cpm
95cpm
110 cpm
Yes
4 sec
3.2 sec
3.2 sec
Max. 9999
600 x 300dpi / 600 x 400dpi / 600 x 600dpi
Platen: 25 400 %, DSPF: 25 200 %
STD: (Supports Tandem operation with MX-M850/950/1100 only)
Document Feeder
Type:
Original Capacity:
Original Replacement speed
(for Copy/Fax/Scanning):
85opm (simplex),
85opm (duplex)
DSPF (Std)
250 sheet
120opm (simplex),
120opm (duplex)
120opm (simplex),
120 opm (duplex)
Document Filing
Requirement:
Capacity:Quick File Folder:
Main/Custom Folder:
Storage Folder(s):
WWW.SERVICE-MANUAL.NET
Machine Specification
MX-M850
MX-M950
MX-M1100
Authentication
User Number (5-8 digit variable)
Login Name & Passwords,
Login Name, Password & E-Mail Address
LDAP
1000 users
Max. 8
Max. 8
Login Method:
External Authentication:
User Registrations:
Page limit Groups:
Authority Function Groups:
Printer
Requirement:
Print Speed (A4 Cont.):
PDL (Emulation):
Interface:
Supported OS:
Bundled Utility Software:
Tandem Print:
Requirement:
Fax
Requirement:
Communication Formula:
Document size:
Compression:
Dial Registration:
Broadcast Transmission:
Inbound Routing:
PC-Fax:
Opt: (MX-FXX1)
Super G3, Max. 33,600 bps
Max. A3 size, Long original (Max 800mm)
MH, MR, MMR, JBIG
Up to 999 destinations (including e-mail address)
Yes, Max. 500 destinations
Yes
Opt. (MX-PBX2 is required- Windows OS only)
WWW.SERVICE-MANUAL.NET
Option Specification
Large Capacity Cassette:
Model:
Paper Capacity (80 g/m2):
Paper Size:
Paper Weight:
MX-LCX3N [A3]
3000 sheets
A3W-A4R,
60-205 g/m2
MX-LCX6 [A4]
3500 sheets
A4
60-205 g/m2
MX-LCX4 [A4]
Upper & Middle 1000 sheets,
Lower 2550 sheets
A4W-A5R
Upper 52-205 g/m2
Middle 52-205 g/m2
Lower 52-176 g/m2
MX-LCX5 [A3]
Upper & Middle 1000 sheets,
Lower 2000 sheets
A3W-A5R, SRA3, SRA4,
Upper 52-205 g/m2
Middle 52-300 g/m2
Lower 52-205 g/m2
Model:
Paper Capacity (80 g/m2):
MX-MFX1
100 sheets
Paper Size:
A3W-A5R
52-300 g/m2
Paper Weight:
Finishing:
Model/Type:
Paper Size:
Paper Weight:
MX-CFX2 [Inserter]
A3W-A5R, SRA3, SRA4,
52-205 g/m2
Upper Tray: 200 sheets,
Lower Tray 200 sheets
Model/Type:
N/a
Finishing:
Functionality:
Stitch Method:
Functionality:
Stitch Method:
MX-FNX6 [Finisher]
Upper Tray: 250 sheets A4,
Lower Tray: 3000 sheets A4
WWW.SERVICE-MANUAL.NET
Machine Options
ALL Models (unless otherwise stated):
MX-PXX3
EFi I/F Kit
MX-PKX4
PS3 Option
MX-PEX3
EFi Controller
AR-PF1
Bar Code Font
MX-PBX2
Printer Option
MX-FXX1
Fax Option
MX-AMX1
Application
Module
MX-NSX1
Network Scanner
MX-AMX2
Communication
Module
MX-AMX3
Account
Module
MX-EBX1
Colour Option
MX-FWX1
Internet Fax
MX-MFX2
Multi Bypass
MX-CFX2
Inserter
OR
MX-FNX5
Finisher
MX-FNX8
Saddle Unit
MX-FDX1
Folding Unit
MX-PNX3A/C/D
Hole Punch
MX-LCX4
3 Tray LCT A4
MX-LCX5
3 Tray LCT A3
AR-SU1
Stamp Unit
MX-MFX1
Multi Bypass
OR
MX-FNX7
Saddle Finisher
[MX-M850 only]
MX-FNX6
Finisher
[MX-M850 only]
MX-LCX6
A4 LCC
MX-LCX3N
A3 LCC
[MX-M850 only]
MX-PNX4A/C/D
Hole Punch
WWW.SERVICE-MANUAL.NET
Machine Options
Model
MX-M950
MX-M850
MX-M1100
Description
Large Capacity Cassette [3,500 sheets A4]
Large Capacity Cassette [3,000 sheets A3]
MX-LCX6
MX-LCX3N
N/A
Comment
Requires MX-MFX1
Bypass Tray
MX-LCX4
MX-LCX5
Cannot be installed in
combination with
MX-FNX6 or MX-FNX7
Finishers (85cpm)
MX-MFX1
LCC is required
MX-MFX2
MX-FNX5
2 & 3 Hole
2 & 4 Hole
4 Hole Wide
MX-PNX3A
MX-PNX3C
MX-PNX3D
MX-FNX6
MX-FNX7
2 Hole
2 & 4 Hole
4 Hole Wide
N/A
MX-PNX4A
MX-PNX4C
MX-PNX4D
Inserter
MX-CFX2
Folding Unit
MX-FDX1
TBD
Saddle Unit
MX-FNX8
MX-PBX2
MX-PKX4
Requires MX-FNX5
Requires MX-FNX5.
Optional MX-CFX2 or
MX-FDX1 or MXFNX8
is also required.
Requires MX-FNX5
Cannot be installed with
MX-FNX6 or MX-FNX7
Finishing option.
AR-PF1
Requires MX-PBX2
Printer Expansion
MX-PEX3
Requires MX-PXX3
MX-PXX3
MX-FRX8
CC Certified (TBD)
MX-FRX8U
Commercial version
MX-NSX1
MX-EBX1
WWW.SERVICE-MANUAL.NET
Machine Options
Model
MX-M950
MX-M850
MX-M1100
Description
Facsimile Expansion Kit
MX-FXX1
MX-FWX1
Stamp Unit
AR-SU1
AR-SV1
MX-AMX1
MX-AMX2
MX-AMX3
MX-USX1
MX-USX5
MX-US10
MX-US50
MX-USA0
Comment
MX-NSX1 required
Option Combination
Paper Feed Options
A3 LCT (3 Tray)
A4 LCT (3 Tray)
A3 LCC (MX-M850 only)
A4 LCC
Bypass Tray
Bypass Tray (3 Tray LCT)
Output / Finishing
Options
Inserter
Folding Unit
Saddle Unit
GBC Punch Unit
Finisher 100
Finisher 50
(MX-M850 only)
Saddle Finisher
(MX-M850 only)
1 Option
4 Options
[MX-CFX2]
[MX-FDX1]
[MX-FNX8]
[MX-FNX5]
[MX-FNX6]
[MX-FNX7]
WWW.SERVICE-MANUAL.NET
Consumables
Model
Contents
MX-M850
Toner:
MX-850GT Toner Cartridge with IC chip
Process Section:
MX-850GV Developer (465g x 2 bags)
MX-M950
MX-M1100
Comment
A4 @ 6%
coverage
120K
500K
MX-850GR
Drum
MX-850KA
500K
MX-850BL
Cleaner Blade
500K
MX-850HB
500K
MX-850FL
1000K
MX-850CB =
(MX-850BL x 10)
500K
(or 6 months)
Fuser Section:
MX-950KC
MX-850HK
MX-950HK
MX-950WC
10
500K
1000K
MX-M850 only
1000K
MX-M950/1100
only
500K
WWW.SERVICE-MANUAL.NET
Consumables
Model
Contents
MX-M850
MX-M950
MX-M1100
Comment
Transfer Section:
MX-850KF
MX-850TT
MX-850KB =
(MX-850KF x 10)
1000K
MX-850DF
200K
Peripherals:
AR-SC2
MX-SCX2
MX-SCX3
AR-SV1
5000 staples (x 3)
For
MX-FNX6/FNX7
(same as
AR-FN7/13/14)
5000 staples (x 3)
For MX-FNX5
2000 staples (x 4)
(x 2)
For AR-SU1
Service Rotation:
MX-850FU
MX-950FU
MX-950WU
500K
MX-850TU
1000K
1000K
WWW.SERVICE-MANUAL.NET
11
Initial Setup
UNPACKING & LOCK REMOVAL
Use Skid Slopes [UKOG-0367FCZZ] to remove
device from shipping pallet.
Operation Panel Installation & USB Extension
Tray Lift Lock Plates.
Fuser Pressure Release.
DEVELOPER SET-UP
Sim 25-06
INITIAL SETTINGS
Sim 21-01
Sim 26-02
Sim 26-06
Sim 26-35
Sim 26-52
Sim 22-05
Sim 40-02
Sim 40-12
12
WWW.SERVICE-MANUAL.NET
Initial Setup
IMAGE WRITING DISTORTION (SKEW)
Sim 64-02
Sim 50-28
Manual Adjustment:-
Sim 50-10
Sim 50-28
SETUP/PRINT ADJ:
(Lead, Offset or All CS,MFT,LCC)
Manual Adjustment:-
Sim 50-10
Sim 50-05
Sim 50-28
OC ADJUST
(Lead, Offset & Mag.)
Manual Adjustment:-
Sim 48-01
Sim 50-01
Sim 50-12
WWW.SERVICE-MANUAL.NET
13
Initial Setup
DSPF IMAGE POSITION & VOID
Automatic Adjustment:-
Sim 50-28
Manual Adjustment:-
Sim 50-06
Sim 50-12
Sim 46-24
IMAGE DENSITY
Sim 46-02
Sim 46-04
Sim 46-05
Sim 46-09
OTHER PERIPHERALS
MX-FDX1: Z Fold Skew Adjustment.
MX-FNX7, MX-FNX8:
Sim 03-10 Saddle Fold/Staple Position Adjustment.
OTHER
Sim 22-06 Data Simulation Print.
System Settings: Adjust Clock (Set Time & Date).
Device Clone & Storage Backup:
Backup System Settings, Scan Destinations, User Control,
OSA Configuration after customer installation is complete
14
WWW.SERVICE-MANUAL.NET
Sim 44-34
Half Tone Image Correction:
Half Tone Correction Forcible Execution
Sim 44-03
OPC Dark Potential Adjustment
Half Tone Correction Forcible Execution
Engine
Printer (Option)
Sim 46-24
Sim 67-24
SERVICE MODE
SERVICE MODE
Sim 46-16
Sim 67-25
Sim 63-07
Sim 67-27
WWW.SERVICE-MANUAL.NET
15
Maintenance
Consumable Quick Reference Guide:Total Maintenance
Drum
MX-850GR
Developer
MX-850GV
500K PM Kit
MX-850KA
MX-850HB
Filter Kit
MX-850FL
Process
Fuser
Transfer
500K
x
MX-950KC
MX-850HK
MX-950HK
MX-950WC
MX-850TT
MX-850KF
x
x
x
x
x
x
Maintenance Indications:
TA
Process
Section
(Drum)
VK
Replace Developer.
Process
Section
(Developer)
FK3
Fuser
Section
DK
Starting Powder:
The following starting powder should be applied to the relevant consumable item during routine
maintenance:Model
MX-M850
MX-M950
MX-M1100
16
OPC Drum
Transfer Belt
UKOG-0312FCZZ
UKOG-0312FCZZ
[Stearic Acid]
[Stearic Acid]
WWW.SERVICE-MANUAL.NET
Maintenance
MX-M850, MX-M950, MX-M1100:
Interval Checklist
500k 1000k 3000k
Process Section:
Replace Developer [MX-850GV]
Suction Filter
Exhaust Filter
Sim 24-05
Sim 24-07
Sim 25-02
Sim 24-04
Sim 44-03
Sim 44-06
Sim 44-34
Sim 46-24
Sim 67-24
WWW.SERVICE-MANUAL.NET
17
Maintenance
MX-M850, MX-M950, MX-M1100: Continued
Interval Checklist
500k 1000k 3000k
Fuser Section:
Replace Fuser Maintenance Kit: [MX-950KC] : Upper Separation Pawl x6
Lower Separation Pawl x4
Fuser Front Paper Guide
Replace Heat Roller Kit [MX-850HK] for MX-M850 or
Heat Roller Kit [MX-950HK] for MX-M950/1100 : Upper Heat Roller
Lower Heat Roller
Transfer Section:
Replace Transfer Cleaning Kit [MX-850KF] : Transfer Side Seal F x1
Transfer Side Seal R x1
Transfer CL Blade x1
Replace Transfer Belt Kit [MX-850TT] : Transfer Belt
Transfer Roller
Ball Bearing x4
DSPF:
Check/Clean DSPF Rollers - Replace when DSPF counter reaches
200k [MX-850DF].
Clean all DSPF sensors.
General:
Clean all optics, CCD, and white reference plate.
18
WWW.SERVICE-MANUAL.NET
Maintenance
MX-M850, MX-M950, MX-M1100: Continued
Interval Checklist
500k 1000k 3000k
Paper Feed & Transport:
Replace Paper Dust Cleaner [MX-850KA]
Check/Clean ALL Vertical & Transport Paper Guides, Transport
Rollers & Paper Path Sensors
Check/Clean ALL Vertical & Transport Paper Path Sensors & Doube
Feed Detect Sensor (only use Blow Brush).
Check/Clean PF Rollers [MX-850RT Main Engine Only]
Replace when Individual Tray counter reaches 200k.
Replace Paper Feed Transport Roller 4 [NROLR1606FCZZ] &
Paper Feed Transport Roller 3 [NROLR1607FCZZ] when Tray3 or
4 counter reaches 3000k.
Replace PS Roller [NROLR1670FCZZ] & PS Follower Roller (Idle)
[NROLP1667FCZZ]
Duplex Section
Replace ADU Paper Feed Roller [NROLR1685FCZZ], ADU
Transport Roller [NROLR1687FCZZ x 3] & ADU Side Transport
Roller [NROLR1686FCZZ x 2] when ADU counter reaches 3000K
Sim 24-02
WWW.SERVICE-MANUAL.NET
19
Maintenance
MX-M850, MX-M950, MX-M1100: Options
In addition, check/perform the following on the installed options:Interval Checklist
500k
2500k
MX-LCX3N, MX-LCX6 LCC
Check/Clean LCC Paper Feed Rollers - Replace when LCC counter
reaches 200k:- [NROLR1467FCZ1 x 1, NROLR1682FCZZ x 2]
MX-LCX4, MX-LCX5 3 Tray LCT
Check/Clean LCC Paper Feed Rollers - Replace when individual LCC
Tray counter reaches 200k:- [0PQAF030080// x 1, 0PQAF031081// x 1,
0PQAF032080// x 1]
MX-MFX1 Bypass Tray
Check/Clean Manual Feed Rollers - Replace when Manual Feed counter
reaches 100k:- [NROLR1466FCZ1 x 2, NROLR1467FCZ1 x 1]
MX-MFX2 Bypass Tray for 3 Tray LCT
Check/Clean Manual Feed Rollers - Replace when Manual Feed counter
reaches 200k:- [0PQAF030080// x 1, 0PQAF031081// x 1,
0PQAF032080// x 1]
MX-CFX2 Inserter
Check/Clean Inserter Pick Up Roller, Separation Roller & Feed Belt Replace when Individual Inserter Feed counter reaches 60k :[0PQB4772225// x 1, 0PQA8061295A/ x1, 0PQA8592241// x 1]
x
x
20
MX-FNX5 Finisher
Check/Replace the Offset Tray Drag (Shift Sponge) Rollers when the
Total Counter reaches 500k [0PPB4783503// x 2]
Check/Replace Staple Unit when Staple Counter reaches 500k
[0PPAJ011023//]
Check/Replace the Positioning (Gang) Roller when Total Counter
reaches 2500K [0PPB4782116// x 1]
Check/Replace Discharge Brush Rollers when Total Counter reaches
2500K [0PPB3022413// x 2, 0PPA6972138// x 2]
MX-FNX6 Finisher, MX-FNX7 Saddle Finisher (85cpm only)
Check/Replace the Offset Tray Drag (Shift Sponge) Rollers when the
Total Counter reaches 500k [0PPB4783503// x 2]
Check/Replace Staple Unit (edge binding) when Staple Counter reaches
500k [0PPAJ011015//]
Check/Replace Saddle Staple Unit (centre binding) when Saddle Staple
Counter reaches 200k [0PPB7007852// x 1 set]
Check the Shift (Positioning) Roller when the Total Counter reaches
2500K replace if worn [0PPB4082435// x 1]
MX-FNX8 Saddle Unit
Check/Replace Saddle Staple Unit (centre binding) when Saddle Staple
Counter reaches 200k [0PPB7007852// x 1 set]
Check the Shift (Positioning) Roller when the Total Counter reaches
2500K replace if worn [0PPB4082435// x 1]
WWW.SERVICE-MANUAL.NET
Parts Compatibility
Description
PWB Unit:
MFP Control PWB Unit
W-ICU PWB
PCU PWB
Delivery Driver PWB
Paper Feed Driver PWB
Operation Control PWB
SCN Control PWB
SCN Mother PWB
SCN AFE PWB
LCD Invertor PWB
WH PWB
AC Power Supply
DC Power Supply
DC Sub Power Supply
DC Power Supply for Options
Heater Lamp PWB
PIC PWB
Misc:
Operation Panel Unit
Copy Lamp
CCD Lens Unit (Scanner)
DV Unit
Toner Hopper
Process Sensor (ID)
Main Charger Unit
Double Feed Detect Unit (Engine)
PS Roller
PU Roller (Engine Only)
PF & SEP Roller (Engine Only)
Bypass Tray PU Roller
Bypass Tray PF & SEP Roller
PU Roller (A4/A3 LCC)
PF & SEP Roller (A4/A3 LCC)
3 Tray LCT PU & SEP Roller
3 Tray LCT PF Roller
Transfer Roller
Transfer Drive Roller Unit
LSU Control PWB
LSU Unit
Polygon Motor (LSU)
Fuser Section:
MX-M850
MX-M950
MX-M1100
CPLTM7254DS54
CPLTM7253DS51
CPWBX1762FCE3
CPWBN1761FCE1
CPWBN1761FCE2
CPWBX1738FC51
CPWBX1751DS51
CPWBX1750FCE1
CPWBX1752FCE1
CPWBF1740FC51
CPWBN1759FCE1
CPWBN1770FCE3
RDENC0026FCPZ
RDENC0069FCPZ
RDENC0050FCZZ
CPWBN1758FCE1
CPWBX1748FCE1
CPLTM7254DS55
CPLTM7253DS52
CPWBX1762FCE6
CPWBX1751DS52
CPWBN1758FCE3
CPLTM7254DS56
CPLTM7253DS53
CPWBX1762FCE7
CPWBX1751DS53
CPNLC0273FC52
RLMPD0734FCPZ
CPLTM7205DS51
DUNT-7924FCZZ
CBOX-0174DS51
CPWBF1562FCE1
CCASZ0326FC51
n/a
NROLR1670FCZZ
NROLR1467FCZ1
NROLR1682FCZZ
NROLR1467FCZ1
NROLR1466FCZ1
NROLR1467FCZ1
NROLR1682FCZZ
0PQAF030080//
0PQAF031081//
NROLR1672FCZZ
CROLM1658FC51
CPWBX1743DS54
DUNT-7905FCZZ
RMOTP0961FCPZ
DUNT-7896FCPZ
CPWBX1743DS55
DUNT-7905FC11
CPWBX1743DS56
DUNT-7905FC12
RLMPU0763FCPZ
CPWBX1756DS52
CGIDM2382FC32
CPWBX1756DS53
RLMPU0762FCPZ
RLMPU0762FCP1
RDTCT0190FCZZ
RDTCT0189FCZ2
RTHM-0036FCZZ
CPWBX1756DS51
CPWBX1757FCE1
CGIDM2382FC31
CPLTM6526FC33
WWW.SERVICE-MANUAL.NET
21
JST (www.jst.com)
PND series
PNDP-16V-Z
Before connecting a third party auditor, the device should confirm to the following:1. The auditor interface should be optically isolated from the copier.
2. The device should be Power Supply Unit independent.
3. The device power supply unit should be a plug top adapter, not internal.
4. The plug top adapter should have a reinforced insulation barrier.
5. The audit device MUST comply and display the relevant safety approval mark (C-Tick,
CE equivalent).
To enable coin vend function, test simulation 26 03 should be set as required:-
Diagnostic
Setting
MODE 1
MODE 2
MODE 3
22
The specified
quantity is
completed.
Remainder of
money is left
Condition 1
Operation 1
Operation 1
Operation 1
Remainder of
money left
Condition 2
Operation 2
Operation 1
Operation 3
Condition 3
Operation 2
Operation 2
Operation 2
The specified
quantity is
completed.
No money
remaining
Condition 4
Operation 1
Operation 1
Operation 3
OPERATION 1
OPERATION 2
OPERATION 3
WWW.SERVICE-MANUAL.NET
Out
Out
In
Out
Out
Out
In
Out
Out
Out
Out
Out
Out
Out
Out
Out
Mode Signal
Mode
B/W
CL-COLOR1
0
Full Colour
Others
(Single/Two Colour)
CL-COLOR0
0
N/a
SIZE2
0
0
0
0
0
1
1
1
1
0
0
0
SIZE1
0
0
1
1
1
0
0
1
1
0
1
0
SIZE0
0
1
1
0
1
0
1
0
1
0
0
1
WWW.SERVICE-MANUAL.NET
PAPER SIZE
NIL
A3
A3W
A4
LT
B4
LG
WLT
INV
B5
A5
EXTRA
23
Firmware Upgrade
USB Device:
1. Insert the USB memory device containing the firmware file into the main USB Port
2. Enter Simulation 49-01
Note: If no USB device is detected, an error message will be displayed.
3. Using the LCD screen, browse and select the correct firmware file
4. The current and the new firmware versions to be updated will be shown within
the display:-
5. Select the required firmware that requires updating (example shown ICU Main &
Language).
Press Execute & Yes to commence the update.
24
WWW.SERVICE-MANUAL.NET
Firmware Upgrade
Note: If all firmware (including peripherals) require updating, select ALL.
7. Once the firmware update has completed successfully, press OK to reboot the device.
WWW.SERVICE-MANUAL.NET
25
Firmware Upgrade
Network (Web Page)
1. Open a web browser and enter the following URL :-
http://ipaddress/service_login.html or
http://ipaddress/service_account.html
Example:
http://192.168.0.110/service_login.html
2. To access the Service Webpage, enter the Service Username and Password.
Click Login:Default
Username:
Password:
service
service
Note: If User Authentication is enabled, open the device webpage and login by
selecting Service from the drop down menu and entering the service password:-
4. Click Browse to navigate to the location of the updated firmware file and select
Open.
26
WWW.SERVICE-MANUAL.NET
Firmware Upgrade
6. When the firmware upgrade is complete, click Reboot to execute a remote restart
of the machine.
WWW.SERVICE-MANUAL.NET
27
Version
ICU (Main)
02.01.H0
OPU
01.00.H0
PCU
01.07.H0
SCU
01.00.H0
DSPF (Main)
01.00.H0
LCC (A4/A3)
01.00.H0
01.01.00
Finisher (4K)
01a04.00
Saddle Unit
01a02.00
Inserter
01.00.00
Folding Unit
01.01.00
NIC
01.04.00
Fax Main
01.04.00
E-Manual
01.50.H0
02.00.Hm
Print Driver:
Driver
Windows 64bit
(XP, 2003, Vista)
PCL5e
01.00.24.049 [WHQL]
n/a
PCL6
01.00.24.049 [WHQL]
01.00.24.049 [WHQL
PS
01.00.26.049 [WHQL]
01.00.27.049 [WHQL]
PPD
07.11a [WHQL]
07.11a [WHQL]
PC FAX
3.2 (0705a)
3.2 (0708a)
For the latest Firmware and Print Driver version(s), please refer to the
SHARP Support Website.
28
WWW.SERVICE-MANUAL.NET
Test Simulation
For a more detailed description, please refer to the MX-M850/950/1100 Service Manual.
PROGRAM
CLEAR
1
2
5
10
1
6
8
12
1
2
3
6
1
2
6
17
18
20
2
3
10
20
21
22
30
31
40
41
10
1
2
3
13
--
14
2
3
5
1
2
3
4
LCD/LED test
Heater lamp load check
Copy lamp check
Discharge lamp check
1
2
3
4
--
15
--
16
--
17
--
21
1
U1 Clear / Cancel
Trouble cancel (U1 trouble).
Clear / Cancel
Trouble cancel (excluding U2/PF trouble).
U2 Clear / Cancel
U2 trouble cancel
PF Clear / Cancel
PF trouble cancel
WWW.SERVICE-MANUAL.NET
29
Test Simulation
22
26
Device Configuration
1
2
3
4
5
6
8
9
10
11
12
13
19
90
18
30
35
38
41
49
50
52
69
27
23
2
80
24
1
2
3
4
5
6
7
9
10
15
30
31
1
2
4
5
6
7
9
10
11
12
13
14
30
1
2
10
40
25
2
7
12
41
1
2
3
1
2
6
26
Device Configuration
2
3
5
6
10
30
43
1
31
32
33
WWW.SERVICE-MANUAL.NET
Test Simulation
44
48
34
35
36
44
45
46
46
51
2
4
5
8
9
10
1
2
3
4
5
6
7
9
12
14
16
28
33
16
19
23
24
31
32
37
39
40
41
42
43
44
45
47
1
5
49
1
3
50
1
2
5
6
7
10
12
27
28
53
Firmware Upgrade
Firmware Upgrade Program
E Manual Update Program
8
12
55
1
2
3
10
56
1
2
6
7
3
4
WWW.SERVICE-MANUAL.NET
31
Test Simulation
60
1
2
61
1
3
62
13
63
7
8
10
11
12
1
2
3
4
5
6
7
8
64
2
3
4
5
6
32
1
2
5
66
1
2
3
4
5
6
1
2
3
6
65
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
25
26
29
30
31
32
33
34
36
WWW.SERVICE-MANUAL.NET
Test Simulation
66
39
42
43
60
67
24
25
27
28
31
32
33
34
WWW.SERVICE-MANUAL.NET
33
Trouble Codes
A0
01
02
03
10
11
12
13
20
21
22
E7
PCU ROM abnormality
SCU ROM abnormality
OPU ROM abnormality
Controller ROM error
IF version discrepancy (CTL-PCU)
IF version discrepancy (CTL-SCU)
IF version discrepancy (CTL-OPU)
Machine level error (CTL detection)
Machine level error (PCU detection)
Machine level error (SCU detection)
C1
00
01
CE
00
01
02
03
04
05
06
07
08
14
18
19
20
21
27
28
29
35
36
37
55
60
61
62
63
65
70
71
75
80
90
EE
E6
10
11
14
11
EL
DSPF Shading Trouble (Black correction)
DSPF Shading Trouble (White correction)
DSPF CCD-ASIC communication trouble
EU
E7
00
01
03
04
05
06
08
09
10
34
F1
00
01
02
03
06
07
08
WWW.SERVICE-MANUAL.NET
Trouble Codes
F1
09
10
11
12
13
15
16
17
18
19
20
22
23
24
25
26
27
28
30
31
33
34
35
43
44
45
46
47
48
50
F1
Staple diagonal motor trouble (finisher +
saddle unit+ inserter) Staple diagonal
motor trouble (saddle finisher)
Staple motor trouble (finisher + saddle
unit+inserter) Staple motor 1 (edge
binding) (saddle finisher)
Discharge motor trouble
Proof select motor trouble
Paper exit port open / close motor trouble
(finisher + saddle unit + inserter)
Paper exit guide plate open /close motor
trouble (saddle finisher)
Tray up / down motor trouble (finisher +
saddle unit + inserter)
Tray motor trouble (saddle finisher)
Staple paper exit motor trouble
Staple select motor trouble
Holding motor trouble
Holding front motor trouble
Holding rear motor trouble
Proof paper exit motor trouble
Bundle branch open / close motor trouble
Pre-stack select motor trouble
Pre-stack transport motor trouble
Pre-stack pawl release motor trouble
Tapping transport motor trouble
Tapping drive motor trouble
Communication trouble between
peripheral devices (saddle unit detection)
Folding plate motor trouble
Punch shift motor trouble
Punch motor trouble
Horizontal resist detection motor trouble
Saddle jogger motor trouble
Center binding stapler rear trouble
(finisher + saddle unit + inserter)
Staple motor 3 (center binding rear)
trouble (saddle finisher)
Center binding stapler front trouble
(finisher + saddle unit + inserter)
Staple motor 2 (center binding front)
trouble (saddle finisher)
Rear edge fence shift motor trouble
(finisher + saddle unit + inserter)
Rear edge fence motor trouble (saddle
finisher)
Drive collar oscillation motor trouble
Saddle discharge motor trouble
Finisher incompatible trouble
60
64
65
66
67
70
71
72
73
74
75
76
77
83
84
85
86
87
88
89
F2
00
02
04
05
06
31
33
39
47
58
59
WWW.SERVICE-MANUAL.NET
35
Trouble Codes
F3
12
22
32
42
H3
Tray 1 lift trouble (main unit)
Tray 2 lift trouble (main unit)
Tray 3 lift trouble (main unit).
Tray 4 lift trouble (main unit).
00
01
02
F4
38
H4
00
F5
10
12
F6
00
01
04
21
30
97
98
01
02
03
36
H5
01
H7
10
11
L1
Double feed detection trouble (PCU)
Double feed detection trouble (SCU)
00
L2
H2
00
30
FF
00
10
02
12
F9
00
01
10
11
L3
00
WWW.SERVICE-MANUAL.NET
Trouble Codes
L4
01
02
03
04
08
14
15
29
30
31
32
34
36
38
39
40
41
43
46
47
48
49
50
51
52
53
54
55
U1
Main motor lock trouble
Drum motor lock trouble
Fusing motor lock trouble
Developing motor trouble
Waste toner transport pipe lock
Toner cartridge motor lock trouble
Fusing front PG control error
HDD cooling fan motor trouble
Controller fan motor trouble
Machine heat exhaust fan 1 trouble
Power cooling fan 1 / 2 trouble
Polygon cooling fan trouble
Toner suction fan trouble
Reverse transport cooling fan trouble
Reverse cooling fan trouble
Ozone exhaust fan 1 trouble
Ozone exhaust fan 2 trouble
Paper cooling fan trouble
Development cooling fan 1 trouble
Power cooling fan 3 trouble
ADU section paper cooling fan 1 trouble
ADU section paper cooling fan 2 trouble
Process cooling fan 1 trouble
Process cooling fan 2 trouble
Process cooling fan 3 trouble
Process cooling fan 4 trouble
PS cooling fan trouble
Process cooling fan trouble
L6
10
L8
01
05
20
U2
00
05
10
11
22
23
24
25
30
50
80
81
90
91
U5
00
11
16
30
31
09
20
21
22
23
24
28
29
33
38
39
PF
--
U6
PC
--
01
WWW.SERVICE-MANUAL.NET
37
Trouble Codes
U6
43
48
49
51
63
68
69
U7
50
51
U9
00
UC
--
38
WWW.SERVICE-MANUAL.NET
0x0101
0x0102
0x0103
0x0201
0x0204
0x0206
0x020A
0x020C
0x021D
0x021F
0x022C
0x0232
0x0233
0x0236
0x0237
0x0238
0x0239
0x023A
0x023B
0x023C
0x023D
0x023E
0x023F
0x0240
0x0241
Retention printing:
Number of jobs exceeded the limit
Selected input tray: Prohibited
0x022D
0x0231
Staple: No function
Staple: Prohibited
Please ask your administrator.
Punch: No function
Punch: Prohibited
2-sided printing: Prohibited
Please ask your administrator.
0x0216
0x0219
Comment
WWW.SERVICE-MANUAL.NET
Offset: Disabled
39
0x0244
0x0245
0x024B
0x024C
0x024E
0x024F
0x0250
0x0252
0x0253
0x0254
0x0301
0x0302
0x0303
0x0304
0x0305
0x0307
0x0309
0x030D
0x030E
0x0315
0x0407
0x0408
40
Invalid user
Invalid user
Only 2-sided print approved
Only 1-sided print approved
Print setting of Document control function:
Always print
Print setting of Document control function:
Not printing
Data Security Kit is not installed
Folding Unit: Incorrect paper type
Folding Unit: Failure
Folding Unit: Prohibited
No paper
No toner
Cover open
Paper jammed
No staple
Staple: Too many pages
Punch debris full
Selected output tray: Failure
0x0316
0x0317
0x0319
0x031B
0x031C
0x031D
0x0326
0x0329
0x0330
0x0401
0x0403
0x0405
0x0406
Comment
WWW.SERVICE-MANUAL.NET
0x040A
0x040C
Other error
PS is not available
Please check your printer driver.
Selected input tray: Prohibited
Please ask your administrator.
Data format is not supported
Output tray: Prohibited or failure
Please ask your administrator.
Disabling of Sharing Mode
0x040D
0x0410
0x0414
0x0420
0x0421
0x0422
0x0423
0x0424
0x0425
0x0427
0x0428
0x0429
0x042A
0x0439
0x0445
0x0446
0x0501
0x0502
0x0426
0x042E
0x042F
0x0438
Comment
Selected output tray: Prohibited
Invalid user
You don't have the authority to use this
function. The requested job was
cancelled due to the following reason:
The requested job was cancelled due to
the following reason:
WWW.SERVICE-MANUAL.NET
41
Sensor Location
42
WWW.SERVICE-MANUAL.NET
Sensor Location
WWW.SERVICE-MANUAL.NET
43
Sensor Location
[MX-FNX7] Saddle Finisher
[MX-LCX3N] A3 LCC
44
WWW.SERVICE-MANUAL.NET
Content
APFD1 not-reached JAM
APFD1 remaining JAM
APFD2 not-reached JAM
(Tray 1 feed paper)
APFD2 not-reached JAM
(Tray 2 feed paper)
APFD2 not-reached JAM
(Tray 3 feed paper)
APFD2 not-reached JAM
(Tray 4 feed paper)
APFD2 not-reached JAM
(ADU re-feed paper)
APFD2 remaining JAM
(Tray 1 feed paper)
APFD2 remaining JAM
(Tray 2 feed paper)
APFD2 remaining JAM
(Tray 3 feed paper)
APFD2 remaining JAM
(Tray 4 feed paper)
APFD2 remaining JAM
(ADU re-feed paper)
APPD1 not-reached JAM
(ADU transport)
APPD1 not-reached JAM
(Face-down paper exit)
APPD1 remaining JAM
(ADU transport)
APPD1 remaining JAM
(Face-down paper exit)
APPD2 not-reached JAM
(ADU transport)
APPD2 not-reached JAM
(Face-down paper exit)
APPD2 remaining JAM
(ADU transport)
APPD2 remaining JAM
(Face-down paper exit)
APPD3 not-reached JAM
APPD3 remaining JAM
Bundle branch open/close motor drive
system
Discharge
Discharge motor JAM
C1PFD remaining JAM
C1PPD1 not-reached JAM
C1PPD1 remaining JAM
C1PPD2 not-reached JAM
C1PPD2 remaining JAM
C2PFD not-reached JAM
(Tray 3 feed paper)
C2PFD not-reached JAM
(Tray 4 feed paper)
C2PFD remaining JAM
(Tray 2 feed paper)
Code
C2PFD_S3
C3PFD_N4
C3PFD_S3
C3PFD_S4
C4PFD_S4
DPF_S1
DPF_S2
DPF_S3
DPF_S4
DPF_SA
DPF_SL1
DPF_SL2
DPF_SL3
DPF_SLC
DPF_SLM
DPF_SM
DRRLVMJ
DSBD1_NA
DSBD1_ND
DSBD1_SA
DSBD1_SD
DSBD2_N
DSBD2_S
EXGPLTMJ
FBJCTGMJ
FBLTJAM
FBLTMJ
FDRRLVMJ
FDSBD_NA
Content
C2PFD remaining JAM
(Tray 3 feed paper)
C3PFD not-reached JAM
(Tray 4 feed paper)
C3PFD remaining JAM
(Tray 3 feed paper)
C3PFD remaining JAM
(Tray 4 feed paper)
C4PFD remaining JAM
(Tray 4 feed paper)
Compulsory stop by double-feed
detection (Tray 1 feed paper)
Compulsory stop by double-feed
detection (Tray 2 feed paper)
Compulsory stop by double-feed
detection (Tray 3 feed paper)
Compulsory stop by double-feed
detection (Tray 4 feed paper)
Compulsory stop by double-feed
detection (ADU re-feed paper)
Compulsory stop by double-feed
detection (Large capacity feed Tray 1
feed paper)
Compulsory stop by double-feed
detection (Large capacity feed Tray 2
feed paper)
Compulsory stop by double-feed
detection (Large capacity feed Tray 3
feed paper)
Compulsory stop by double-feed
detection (Side LCC feed paper)
Compulsory stop by double-feed
detection (Large capacity feed Manual
feed paper)
Compulsory stop by double-feed
detection (Manual feed paper)
Drive roller oscillation motor drive
system
DSBD1 not-reached JAM
(ADU transport)
DSBD1 not-reached JAM
(Face-down paper exit)
DSBD1 remaining JAM
(ADU transport)
DSBD1 remaining JAM
(Face-down paper exit)
DSBD2 not-reached JAM
DSBD2 remaining JAM
Paper exit open / close guide plate
motor JAM
Bundle branch open / close motor
JAM
Discharge JAM
Discharge motor JAM
Drive roller oscillation motor JAM
FDSBD not-reached JAM
(ADU transport)
WWW.SERVICE-MANUAL.NET
45
46
Content
FDSBD not-reached JAM
(Face-down paper exit)
FDSBD remaining JAM
(ADU transport)
FDSBD remaining JAM (Face-down
paper exit)
Movable fence motor JAM
Inlet port section transport notreached
Inlet port section transport remaining
Folding plate motor JAM
Centre folding section not-reached
JAM
No response from FIN
Inlet port section transport Notreached
Inlet port section transport
Remaining
Jogger motor JAM
Folding plate motor drive system
Tray motor JAM
Punch shift motor JAM
Punch motor JAM
Proof paper exit section transport
not-reached
Proof paper exit section transport
remaining
Staple motor JAM 2 (centre binding
front) JAM
Staple motor JAM 3 (centre binding
rear) JAM
Shift paper exit section transport notreached
Shift paper exit section transport
remaining
Shift motor JAM
Centre folding paper exit not-reached
JAM
Centre folding paper exit remaining
JAM
Staple motor JAM 1 (edge binding)
JAM
Staple shift motor JAM
Staple paper exit section transport
not-reached
Staple paper exit section transport
remaining
Return roller oscillation motor JAM
Staple diagonal motor JAM
Horizontal resist detection motor
JAM
Rear edge fence motor JAM
FUPOD not-reached JAM
FUPOD remaining JAM (ADU
transport)
Code
FUPOD_SD
FUPOD_SU
GBCJ
INSENT_N
INSENT_S
INSEXT_N
INSEXT_S
INSFED1_N
INSFED1_S
INSFED2_N
INSFED2_S
INSLUP1J
INSLUP2J
INSOUT_N
INSOUT_S
INSPICM1J
INSPICM2J
INSPL1_N
INSPL1_S
INSPL2_N
INSPL2_S
INSVTR1_N
INSVTR1_S
INSVTR2_N
INSVTR2_S
JOGMJ
KAIHEIMJ
KBPAS1_N
KBPAS1_S
KBPAS2_N
KBPAS2_S
KCOVSHT
KCPAS1_N
KCPAS1_S
KCPAS2_N
KCPAS2_S
Content
FUPOD remaining JAM (Face-down
paper exit)
FUPOD remaining JAM
(Face-up paper exit)
GBC punch unit JAM
Inlet port sensor not-reached JAM
Inlet port sensor remaining JAM
Exit port sensor not-reached JAM
Exit port sensor remaining JAM
No. 1 paper feed sensor not-reached
JAM
No. 1 paper feed sensor remaining
JAM
No. 2 paper feed sensor not-reached
JAM
No. 2 paper feed sensor remaining
JAM
No. 1 lift motor JAM
No. 2 lift motor JAM
Paper exit sensor not-reached JAM
Paper exit sensor remaining JAM
No. 1 pickup motor JAM
No. 2 pickup motor JAM
No. 1 pull-out sensor not-reached
JAM
No. 1 pull-out sensor remaining JAM
No. 2 pull-out sensor not-reached
JAM
No. 2 pull-out sensor remaining JAM
No. 1 vertical transport not-reached
JAM
No. 1 vertical transport remaining
JAM
No. 2 vertical transport not-reached
JAM
No. 2 vertical transport remaining
JAM
Jogger motor JAM
Paper exit port open/close motor
JAM
Center paper pass 1 sensor notreached JAM
Center paper pass 1 sensor
remaining JAM
Center paper pass 2 sensor notreached JAM
Center paper pass 2 sensor
remaining JAM
Cover paper size short JAM
Sub grip paper remaining JAM
Cover paper pass 1 sensor
remaining JAM
Cover paper pass 2 sensor notreached JAM
Cover paper pass 2 sensor
remaining JAM
WWW.SERVICE-MANUAL.NET
Content
Through paper exit sensor notreached JAM
Through paper exit sensor remaining
JAM
Resist sensor not-reached JAM
Resist sensor remaining JAM
Cover paper resist sensor notreached JAM (switchback operation)
Cover paper resist sensor remaining
JAM (switchback operation)
Cover paper horizontal resist L
sensor not-reached JAM
Cover paper horizontal resist L
sensor remaining JAM
Cover paper horizontal resist S
sensor not-reached JAM
Cover horizontal resist S sensor
remaining JAM
Cut width over JAM
Door open JAM
Finish size height over JAM
Inlet port sensor not-reached JAM
Inlet port sensor remaining JAM
Inserter paper size illegal JAM
Inserter transport path sensor 1 notreached JAM
Inserter transport path sensor 1
remaining JAM
Inserter transport path sensor 2 notreached JAM
Inserter transport path sensor 2
remaining JAM
Inserter lower tray paper empty JAM
Inserter lower tray resist sensor notreached JAM
Inserter lower tray resist sensor
remaining JAM
Inserter interflow front sensor notreached JAM
Inserter interflow front sensor
remaining JAM
Inserter upper tray paper empty JAM
Inserter upper tray resist sensor notreached JAM
Inserter upper tray resist sensor
remaining JAM
Accumulation tray paper not-reached
JAM
Accumulation tray paper remaining
JAM
Book-making quantity over JAM
Book-making quantity insufficient
JAM
Sub grip paper not-reached JAM
Paper size illegal JAM
Timing sensor not-reached JAM
Code
KTMG_S
KWHOUT
L1IDS_N
L1IDS_S
L1IUS_N
L1IUS_S
L1PFS_N
L1PFS_S
L1TS_N
L1TS_S
L2IUS_N
L2IUS_S
L2PFS_N
L2PFS_S
L2TS_N
L2TS_S
L3IUS_N
L3IUS_S
L3PFS_N
L3PFS_S
L3TS_N
L3TS_S
LCC
LCC_LCT
LEXIT_N
LEXIT_S
LFS_N
LFS_S
LFTMJ
LPFD1_S
LPFD2_NL1
LPFD2_NL2
LPFD2_NL3
Content
Timing sensor remaining JAM
White paper exit JAM
No. 1 tray vertical transport sensor 2
not-reached JAM
No. 1 tray vertical transport sensor 2
remaining JAM
No. 1 tray vertical transport sensor 1
not-reached JAM (A3 LCC only)
No. 1 tray vertical transport sensor 1
remaining JAM (A3LCC only)
No. 1 tray paper feed sensor notreached JAM
No. 1 paper feed sensor remaining
JAM
No. 1 tray transport sensor notreached JAM
No. 1 tray transport sensor remaining
JAM
No. 2 tray vertical transport sensor 1
not-reached JAM (A3LCC only)
No. 2 tray vertical transport sensor 1
remaining JAM (A3LCC only)
No. 2 tray paper feed sensor notreached JAM
No. 2 paper feed sensor remaining
JAM
No. 2 tray transport sensor notreached JAM
No. 2 tray transport sensor remaining
JAM
No. 3 tray vertical transport sensor 1
not-reached JAM (A3LCC only)
No. 3 tray vertical transport sensor 1
remaining JAM (A3LCC only)
No. 3 tray paper feed sensor notreached JAM
No. 3 paper feed sensor remaining
JAM
No. 3 tray paper feed sensor notreached JAM
No. 3 tray transport sensor remaining
JAM
LPFD1 not-reached JAM
No response from LCC/LCT
LCC exit port sensor not-reached
JAM
LCC exit port sensor remaining JAM
Interface sensor not-reached JAM
Interface sensor remaining JAM
Tray up / down motor JAM
LPFD1 remaining JAM
LPFD2 not-reached JAM (Large
capacity feed Tray 1 feed paper)
LPFD2 not-reached JAM (Large
capacity feed Tray 2 feed paper)
LPFD2 not-reached JAM (Large
capacity feed Tray 3 feed paper)
WWW.SERVICE-MANUAL.NET
47
48
Content
LPFD2 not-reached JAM (Large
capacity feed Manual feed paper)
LPFD2 remaining JAM (Large
capacity feed Tray 1 feed paper)
LPFD2 remaining JAM (Large
capacity feed Tray 2 feed paper)
LPFD2 remaining JAM (Large
capacity feed Tray 3 feed paper)
LPFD2 remaining JAM (Large
capacity feed Manual feed paper)
LPFD2 remaining JAM (Manual
paper feed)
Transport sensor (LTD) not-reached
JAM
Transport sensor (LTD) remaining
JAM
Upper transport motor JAM
Lower transport motor JAM
LPFD2 not-reached JAM (Manual
paper feed)
Return drive motor JAM
Manual paper feed sensor notreached JAM
Manual paper feed sensor remaining
JAM
Manual fed transport sensor notreached JAM
Manual paper transport sensor
remaining JAM
No JAM. Also used when a JAM is
cancelled.
No match of parameter
Holding front motor JAM
Holding motor JAM
Holding rear motor JAM
Punch motor JAM
POD not-reached JAM (Face-down
paper exit)
POD not-reached JAM (Face-up
paper exit)
POD remaining JAM (Face-down
paper exit)
POD remaining JAM (Face-up paper
exit)
POIND not-reached JAM
POIND remaining JAM (ADU
transport)
POIND remaining JAM (Face-down
paper exit)
POIND remaining JAM (Face-up
paper exit)
Tap drive motor JAM
Image ready complete standby timeout
PPD1 not-reached JAM (Tray 2 feed
paper)
Code
PPD1_N3
PPD1_N4
PPD1_S2
PPD1_S3
PPD1_S4
PPD2_N1
PPD2_N2
PPD2_N3
PPD2_N4
PPD2_NA
PPD2_NL1
PPD2_NL2
PPD2_NL3
PPD2_NLC
PPD2_NLM
PPD2_NM
PPD2_S2
PPD2_S3
PPD2_S4
PPD2_SA
PPD2_SL1
PPD2_SL2
PPD2_SL3
PPD2_SLC
PPD2_SLM
PPD2_SM
PPD3_N1
PPD3_N2
PPD3_N3
Content
PPD1 not-reached JAM (Tray 3 feed
paper)
PPD1 not-reached JAM (Tray 4 feed
paper)
PPD1 remaining JAM (Tray 2 feed
paper)
PPD1 remaining JAM (Tray 3 feed
paper)
PPD1 remaining JAM (Tray 4 feed
paper)
PPD2 not-reached JAM (Tray 1 feed
paper)
PPD2 not-reached JAM (Tray 2 feed
paper)
PPD2 not-reached JAM (Tray 3 feed
paper)
PPD2 not-reached JAM (Tray 4 feed
paper)
PPD2 not-reached JAM (ADU refeed paper)
PPD2 not-reached JAM (Large
capacity feed Tray 1 feed paper)
PPD2 not-reached JAM (Large
capacity feed Tray 2 feed paper)
PPD2 not-reached JAM (Large
capacity feed Tray 3 feed paper)
PPD2 not-reached JAM (Side LCC
feed paper)
PPD2 not-reached JAM (Large
capacity feed Manual feed paper)
PPD2 not-reached JAM (Manual
feed paper)
PPD2 remaining JAM (Tray 2 feed
paper)
PPD2 remaining JAM (Tray 3 feed
paper)
PPD2 remaining JAM (Tray 4 feed
paper)
PPD2 remaining JAM (ADU re-feed
paper)
PPD2 remaining JAM (Large
capacity feed Tray 1 feed paper)
PPD2 remaining JAM (Large
capacity feed Tray 2 feed paper)
PPD2 remaining JAM (Large
capacity feed Tray 3 feed paper)
PPD2 remaining JAM (Side LCC
feed paper)
PPD2 remaining JAM (Large
capacity feed Manual feed paper)
PPD2 remaining JAM (Manual feed
paper)
PPD3 not-reached JAM (Tray 1 feed
paper)
PPD3 not-reached JAM (Tray 2 feed
paper)
PPD3 not-reached JAM (Tray 3 feed
paper)
WWW.SERVICE-MANUAL.NET
Content
PPD3 not-reached JAM (Tray 4 feed
paper)
PPD3 not-reached JAM (ADU refeed paper)
PPD3 not-reached JAM (Large
capacity feed Tray 1 feed paper)
PPD3 not-reached JAM (Large
capacity feed Tray 2 feed paper)
PPD3 not-reached JAM (Large
capacity feed Tray 3 feed paper)
PPD3 not-reached JAM (Side LCC
feed paper)
PPD3 not-reached JAM (Large
capacity feed Manual feed paper)
PPD3 not-reached JAM (Manual
feed paper)
PPD3 remaining JAM (Tray 1 feed
paper)
PPD3 remaining JAM (Tray 2 feed
paper)
PPD3 remaining JAM (Tray 3 feed
paper)
PPD3 remaining JAM (Tray 4 feed
paper)
PPD3 remaining JAM (ADU re-feed
paper)
PPD3 remaining JAM (Large
capacity feed Tray 1 feed paper)
PPD3 remaining JAM (Large
capacity feed Tray 2 feed paper)
PPD3 remaining JAM (Large
capacity feed Tray 3 feed paper)
PPD3 remaining JAM (Side LCC
feed paper)
PPD3 remaining JAM (Large
capacity feed Manual feed paper)
PPD3 remaining JAM (Manual feed
paper)
PPD4 not-reached JAM (Tray 1 feed
paper)
PPD4 not-reached JAM (Tray 2 feed
paper)
PPD4 not-reached JAM (Tray 3 feed
paper)
PPD4 not-reached JAM (Tray 4 feed
paper)
PPD4 not-reached JAM (ADU refeed paper)
PPD4 not-reached JAM (Large
capacity feed Tray 1 feed paper)
PPD4 not-reached JAM (Large
capacity feed Tray 2 feed paper)
PPD4 not-reached JAM (Large
capacity feed Tray 3 feed paper)
PPD4 not-reached JAM (Side LCC
feed paper)
PPD4 not-reached JAM (Large
capacity feed Manual feed paper)
Code
PPD4_NM
PPD4_S1
PPD4_S2
PPD4_S3
PPD4_S4
PPD4_SA
PPD4_SL1
PPD4_SL2
PPD4_SL3
PPD4_SLC
PPD4_SLM
PPD4_SM
PRESTK_N
PRESTK_S
PRFEX_N
PRFEX_S
PRFKMJ
PRSTKKMJ
PRSTKTMJ
SDBLTMJ
SDEXIT_N
SDEXIT_S
SDFPS_N
SDJOGMJ
SDSHS_N
SDSHS_S
SDSTEX_N
SDSTEX_S
SDSTFMJ
SDSTRMJ
SDUENT_N
SDUENT_S
SFTEX_N
SFTEX_S
SFTJGMJ
Content
PPD4 not-reached JAM (Manual
feed paper)
PPD4 remaining JAM (Tray 1 feed
paper)
PPD4 remaining JAM (Tray 2 feed
paper)
PPD4 remaining JAM (Tray 3 feed
paper)
PPD4 remaining JAM (Tray 4 feed
paper)
PPD4 remaining JAM (ADU re-feed
paper)
PPD4 remaining JAM (Large
capacity feed Tray 1 feed paper)
PPD4 remaining JAM (Large
capacity feed Tray 2 feed paper)
PPD4 remaining JAM (Large
capacity feed Tray 3 feed paper)
PPD4 remaining JAM (Side LCC
feed paper)
PPD4 remaining JAM (Large
capacity feed Manual feed paper)
PPD4 remaining JAM (Manual feed
paper)
Pre-stack section Not-reached
Pre-stack section Remaining
Proof paper exit section transport
Not-reached
Proof paper exit section transport
Remaining
Proof select motor JAM
Pre-stack select motor JAM
Pre-stack pawl disengage motor JAM
Discharge drive system
FIN paper exit not-reached
FIN paper exit remaining
Center folding section not-reached
Jogger drive system
Center folding section paper exit notreached
Center folding section paper exit
remaining
Staple paper exit section transport
not-reached
Staple paper exit section transport
remaining
Staple motor front drive system
Staple motor rear drive system
Inlet port section transport notreached
Inlet port section transport remaining
Shift paper exit section transport Notreached
Shift paper exit section transport
Remaining
Shift jogger motor JAM
WWW.SERVICE-MANUAL.NET
49
Content
Shift jogger retract motor JAM
Tray shift motor JAM
Size illegal JAM
Emergency stop request JAM
(Controller request)
Lead edge stopper motor JAM
Staple paper exit section transport
Not-reached
Staple paper exit section transport
Remaining
Staple select motor JAM
Staple motor JAM
Stapler front/rear motor JAM
Stapler diagonal motor JAM
Rear edge fence motor drive system
Tray1 paper feed JAM (C1PPD1 notreached JAM)
Tray 2 paper feed JAM (C2PFD notreached JAM)
Tray 3 paper feed JAM (C3PFD notreached JAM)
Tray 4 paper feed JAM (C4PFD notreached JAM)
VPPD not-reached JAM (Tray 3 feed
paper)
VPPD not-reached JAM (Tray 4 feed
paper)
Code
VPPD_S3
ZSTPMDJ
ZSTPMUJ
Content
VPPD remaining JAM (Tray 3 feed
paper)
VPPD remaining JAM (Tray 4 feed
paper)
Paper exit sensor 1 not-reached
Paper exit sensor 1 remaining JAM
Paper exit sensor 3 not-reached
Paper exit sensor 3 remaining JAM
Paper feed sensor not-reached JAM
Paper feed sensor remaining JAM
Upper stopper not-reached JAM
Upper stopper remaining JAM
Folding motor JAM
Pressing timing sensor not-reached
JAM
Pressing timing sensor remaining
JAM
Separation timing sensor notreached JAM
Separation timing sensor remaining
JAM
Lower stopper motor JAM
Upper stopper motor JAM
Code
SPPD5_N
SPPD5_S
SPOD_N
SPOD _S
SPRDMD_S
SPSD_SCN
SPPD6_N
SPPD6_S
SPPD7_N
SPPD7_S
SDFS_S
SDFS_S
Content
SPPD5 not-reached JAM
SPPD5 remaining JAM
SPOD not-reached JAM
SPOD remaining JAM
SPRDMD remaining JAM
Exposure start notification timer end
SPPD6 not-reached JAM
SPPD6 remaining JAM
SPPD7 not-reached JAM
SPPD7 remaining JAM
Double feed detection JAM
Double feed detection JAM
VPPD_S4
ZEXIT1_N
ZEXIT1_S
ZEXIT3_N
ZEXIT3_S
ZFEED_N
ZFEED_S
ZHSTPR_N
ZHSTPR_S
ZMOTJ
ZPRSTM_N
ZPRSTM_S
ZPRTTM_N
ZPRTTM_S
SCU (Scanner):
Code
ICU REQ
NO_JAM_
CAUSE
NO_MATCH
STOP_JAM
SPPD1_N
SPPD1_S
SPPD2_N
SPPD2_S
SPPD3_N
SPPD3_S
SPPD4_N
SPPD4_S
50
Content
ICU factor stop JAM
No JAM. Also used when a JAM is
canceled.
No match of parameter
Emergency stop request JAM
SPPD1 not-reached JAM
SPPD1 remaining JAM
SPPD2 not-reached JAM
SPPD2 remaining JAM
SPPD3 not-reached JAM
SPPD3 remaining JAM
SPPD4 not-reached JAM
SPPD4 remaining JAM
WWW.SERVICE-MANUAL.NET
Repair Hints
SPECIFICATION
Model
Symptom
ALL
Advice
Tandem operation between MX-M850/950/1100 with
MX Colour or MX-M350-700 devices is not supported.
You can only tandem an MX-M850/950/1100 with
another "Hercules" device:eg. MX-M850 with MX-M1100.
COPY QUALITY
ALL
ALL
ALL
ALL
ERROR CODE
ALL
MX-M850
MX-LCX3N
MX-LCX4
MX-LCX5
U6-20
WWW.SERVICE-MANUAL.NET
51
Repair Hints
MISC
ALL
ALL
MXM850
PERIPHERALS
MXFNX5
MXFNX6
MXFNX7
MXFNX8
MX-CFX1
MXCFX1
MXFNX5
MXFNX8
All
52
WWW.SERVICE-MANUAL.NET
Notes
WWW.SERVICE-MANUAL.NET
53
Notes
54
WWW.SERVICE-MANUAL.NET