Documente Academic
Documente Profesional
Documente Cultură
Enter the Recovery mode of your device. There are 2 methods to do it as follows:
Method 1: Launch Updater app on your device, click the icon at the top-right corner, and select Reboot to
Recovery mode to enter.
Method 2: You can also turn off your device and then hold both Volume+ button and Power button at the same time to
enter Recovery mode.
In Recovery mode, you can use Volume +/- to select up/down, and Power button to confirm.
After entering Recovery mode, choose the language you use, select Install update.zip to System One and confirm,
and then your device will begin updating automatically. Wait until the update is completed, choose Reboot to System
One, and then your device should boot to the new version.
FASTBOOT
Turn off the device. Press the Volume key and the Power button at the same time to enter Fastboot mode. Then
connect the device to the Windows PC/laptop via a micro USB cable
Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack,
and copy its path on the computer.
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security
warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file
folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device.
Then click the second button (circled out in red) to flash the ROM file to the device.
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed.
Then your device should automatically boot to the new version.
If the flashing guide could not help you, please download Mi PC Suite here
(After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer,
and select the correct ROM file to flash)
FASTBOOT 2
Steps:1. Download ROM from the above link (Which Oneyou Want to Flash) and
extract it to Desktop.
Note: - Some users get error while extracting onDesktop Because there is
space in the username of PC or the folder as shown.
The users should put the ROM In C Drive in a folder without spaces. E,g
C:/ROM/MIUI
The Error shown when using space between foldername
2. Download flashing tool from the above link and install it.
3. Once installation is complete, Run MiFlash application
4. Click on browse
5. Select ROM folder from Desktop(From the location where ROM is saved)
6. Turn off the phone, press the Volume Down keyand the Power button at
the same time to enter Fastboot mode, then connect the phone to a
computer.