Documente Academic
Documente Profesional
Documente Cultură
Manufacturer:
Model Number Tested:
Other Model Numbers:
Ledon
28000287 (LED LAMP A65 13W/M/927 E27 230V DIM)
none
Manufacturer's Description
Type of device:
Operating voltage:
Input Power
Input Current:
Input Frequency:
LED 13 W A65
240V
13.0 W
0.07 A
50 Hz
18-Mar-14
240 V
Test results valid only at 240 V and 50 Hz.
Control Type:
Dimming Range:
Output Power:
Lumen Output:
Type/Shape:
Base Type:
Perceived Comments
(3)
Low End
Wallbox Dimmers
No applicable results
Commercial Systems
Panel Module
HW/LP-RPM-4A230
HW/LP-RPM-4U230-CE
RP
1-8
20% (32)
95% (83)
44%
FP
1 - 58
18% (28)
95% (80)
42%
Panel Module
GP (Harrier)
Card
FP
1 - 58
14% (18)
95% (82)
38%
Grafik QS/
Wallbox Power Module
Grafik Eye QS
Main Unit
Family, 240V/
LQR-WPM6PCE
LQSE-4A-D (_)*/
QSNE-4A-D (_)*
FP
1 - 38
18% (30)
96% (80)
42%
RP
1-7
19% (27)
100% (79)
43%
LQSE-4A-D
(Gen. 2)*/
QSNE-4A-D
(Gen. 2)*
RP
1-7
12% (21)
94% (87)
35%
HW/LP-RPM-4A230
HW/LP-RPM-4U230-CE
RP
1-8
20% (32)
95% (83)
44%
FP
1 - 58
18% (28)
95% (80)
42%
GP (Harrier)
Card
FP
1 - 58
14% (18)
95% (82)
38%
Panel Module
HomeWorks QS/
ESN Phase Adaptive
HomeWorks QS/
ESN Phase Adaptive
Residential Systems
Panel Module
Panel Module
Panel Module
Page 1 of 2
Grafik QS/
Wallbox Power Module
HomeWorks QS/
ESN Phase Adaptive
HomeWorks QS/
ESN Phase Adaptive
Grafik Eye QS
Main Unit
Family, 240V/
LQR-WPM6PCE
LQSE-4A-D (_)*/
QSNE-4A-D (_)*
FP
1 - 38
18% (30)
96% (80)
42%
RP
1-7
19% (27)
100% (79)
43%
LQSE-4A-D
(Gen. 2)*/
QSNE-4A-D
(Gen. 2)*
RP
1-7
12% (21)
94% (87)
35%
NGRX-ELVI-CE
with Grafik Eye
QS Main Unit,
240V
NGRX-PB-CE
with Grafik Eye
QS Main Unit,
240V
RP
1 - 10
19% (43)
92% (77)
44%
FP
1 - 10
20% (30)
94% (80)
44%
Interfaces (4)
Notes:
* Identical model numbers with different compatibility codes may have different performance; (_) means there is no compatibility code assigned;
contact technical support for additional information.
(1) Control types of FP and RP represent Forward Phase and Reverse Phase, respectively. See product literature for details.
(2) Values are based on light output using the specified dimming control, and may not be an indication of the fixtures full rated capability.
Values are set to optimize performance, such as reducing dead travel, ensuring that fixtures turn on at low end, reducing turn-on time at
low end, and trimming out instability. Software trim values are indicated in parentheses when applicable.
(3) Perceived light level percentage is the square root of the measured light level percentage, per IESNA Lighting Handbook.
(4) Interfaces have been tested with the listed control; any compatible dimmer may be used instead, but high end/low end light levels may vary
slightly.
Test Comments:
Performance verified with up to 11 fixtures per control. Maximum Fixtures per Dimmer value represents the maximum
safe loading of the control.
For any questions on this report, please contact the Lutron LED Center of Excellence at 877-DIM-LED8 or leds@lutron.com.
This information was posted with the consent and cooperation of the device manufacturer. Please be aware that device manufacturers may modify their product at any time, without
notice to Lutron, and therefore Lutron cannot ensure future compatibility. For more detailed and up to date fixture specifications, performance and/or any related recall
information, visit the manufacturers website. The latest Lutron test results can always be found at www.lutron.com/LEDtool.
Page 2 of 2