Sunteți pe pagina 1din 1
{Giting of the complete pump unit with the liting device attached to the motor, should be avoided os the motor’s lifting provisions may not be able to ‘anry the combined weight of the pump and motor. Lifting a complete pump unit, using slings AN ortocks stated ryan connecting came may be dangerous since the ceue ut EFavity of the pump unit may be higher then the points of attachments, Mounting The pump must be securely mounted on a firm stable foundation and positioned so that itis easily accessible for inspection and servicing Provisions for collecting oil spillage when servicing the pump should be considered. The installation must always be designed to minimise damage. Should an operational or functional failure occur. E.g. precautions should be considered to collect oil spillage due toa broken Alignment and shaft couplings The pump shall be connected to its driver via a flexible shaft coupling. Pumps of type ACC UCG and ACF/UCF may also be driven tin gear oe Pulleys as specified in the Product Desssiption, Provided the radial forces are kept within the specified range An angular misalignment of 0.1° corresponds to 2PPrOx. 0.2 mm deviation/100 mon he coupling and alignment shall be selected not to fansmit any axial or radial loads on the shaft onde between the coupling halves as per table, fig 4 the fCupling halves shall be secured by lock screws, Fescther types of couplings, please refer to respec tive maker's manual. When fiting the shaft coupling, do not use a A\ hammeron Siar ee, 2m as ball bearing and shatt seal, Use some Kind of press toc ZA When handling liquids that may harm skin ‘se gloves and/or protective clothing, 4 IMO AB, Telephone: + 46 8 50 622 () \ eC a Distance Circular ‘Angular between run-out alignmtent coupling hatves 1 i q [| / Hh ax ox ® See table below | 040 max 0.3mm An angular Bsa mac ad n | misalignment of 0.1 corresponds to approx. 0.2 mm aeviation/100 mm ‘Outer dimer [Oba tetocen ‘tcouping | coupling halves ‘Oom) Cam) ‘Onm) ‘om pak sii cages Oy 30350 Te 3s 7 0 | 2s 16 is 35, 5 | 30 ts. 194 35, @ | 30 2 24 40 m | 3s 4 240 40 | 35 Distance between coupling halves, (IMO AB standard coupling) 800, Telefax: + 46 8 645 15.09 LP 1205GB E-mail info@imo.se, Web: www.imose

S-ar putea să vă placă și