Documente Academic
Documente Profesional
Documente Cultură
1. While creating a hunt group member numbers should already be created.(T/F) True
2. Hunt Group feature allows automatic selection of a free line from a group of lines. This
means (hunt / centrex). Hunt
3. The member directory number in a hunt group can be.(can be / can not )be called
directly.
4. The hunting procedure in a hunt group is initiated only when the member number is called.
(T/F) False
5. The CENTREX feature is used to provide a virtual ..PABX for a group of
subscribers.(actual / virtual)
6. Centrex facility is not possible for digital subscribers. (T/F) False
7. Calls within CENTREX are charge free ..(charge free / chargeable)
8. Calls outside CENTREX can be made by dialing specific code (0).(any code/specific
code)
9. Within CENTREX member shall be fed new dial tone ...( no dial tone /new dial tone)
10. Normal facilities can not be provided to CENTREX subscribers -False
1. Testing the subscriber line from the exchange maintenance terminal can be done.(T/F) True
2. Exchange side line and external side line can be separated by wedging at the MDF . (T/F) T
3. External side line test gives information regarding the insulation of line.(T/F) True
4. Performance of operation..Degrades.if insulation decreases.( degrades, upgrades)
5. Ideally there should not...be an A.C. potential between the two limbs of subscriber line.
( should, should not)
6. Ideally there should not .be a D.C. potential between the two limbs of subscriber line.
( should, should not)
7. The resistance between the limbs (Cross insulation) of a pair is of the order of Mega ohm
(milliohm , Mega ohm.)
8. Subscriber equipment can... be checked from the Exchange.( can , can not)
9. For performing the self test from a line one has to dial 161..(151,161,181)
10. If subscriber is not getting dial tone, how to approach the problem?