Documente Academic
Documente Profesional
Documente Cultură
COIMBATORE -107
Internal Assessment -3
Academic
Year 2015-16
ACD/QP/01
13.10.2015
Rev: 0
Page No:1
Date : 19-10-2015
Course code
ME 6302
Course
Title
MANUFACTURING TECHNOLOGY - I
ACD/QP/01
13.10.2015
Rev: 0
Page No:1
Date : 19-10-2015
PART A (10x2=20)
Course
Title
MANUFACTURING TECHNOLOGY - I
PART A (10x2=20)
1.
2.
1.
2.
PART B (3x10=30)
11. a) Describe with illustrative sketches, the following sheet metal operations:
i) Bending edge of a sheet using wiping die, ii) Roll Bending, iii) Stretch forming,
iv) Deep Drawing.
[May/June 2012]
(or)
b) With a neat sketch, explain the rubber pad forming process. How does it differ
from rubber hydro forming process?
[May/June 2012]
12. a) Explain the explosive and super plastic forming processes with neat sketches
[Nov/Dec 2010]
(or)
b) Describe the working principle of film blowing and Thermoforming.
[Nov/Dec 2010]
13. a) What is Rotational moulding? Explain the same with necessary sketch. Mention
also its applications.
[May/June 2012]
(or)
b) Explain the various steps required to manufacture a plastic bottle using blow
moulding process, with a neat sketch.
[May/June 2012]
PART B (3x10=30)
11. a) Describe with illustrative sketches, the following sheet metal operations:
i) Bending edge of a sheet using wiping die, ii) Roll Bending, iii) Stretch forming,
iv) Deep Drawing.
[May/June 2012]
(or)
b) With a neat sketch, explain the rubber pad forming process. How does it differ
from rubber hydro forming process?
[May/June 2012]
12. a) Explain the explosive and super plastic forming processes with neat sketches
[Nov/Dec 2010]
(or)
b) Describe the working principle of film blowing and Thermoforming.
[Nov/Dec 2010]
13. a) What is Rotational moulding? Explain the same with necessary sketch. Mention
also its applications.
[May/June 2012]
(or)
b) Explain the various steps required to manufacture a plastic bottle using blow
moulding process, with a neat sketch.
[May/June 2012]
Faculty
HoD
Principal
Faculty
HoD
Principal