Documente Academic
Documente Profesional
Documente Cultură
453/2010
Product code
: 22180
Product description
: Paint.
Product type
: Liquid.
Other means of
identification
: Not available.
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Uses in Coatings - Industrial use
Uses in Coatings - Professional use
Industrial applications, Professional applications, Used by spraying.
Coatings: Solvent-borne.
22180
^(ValidationDate).
: Mixture
1/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
See Section 16 for the full text of the R phrases or H statements declared above.
See Section 11 for more detailed information on health effects and symptoms.
2.2 Label elements
Hazard pictograms
Signal word
: Warning.
Hazard statements
Precautionary statements
General
: Not applicable.
Prevention
Storage
: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot
surfaces, sparks, open flames and other ignition sources. No smoking. Avoid
release to the environment.
: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
: Keep cool.
Disposal
: Not applicable.
Response
Hazardous ingredients
Supplemental label
elements
Additional information
: Not applicable.
: None known.
: Mixture
Classification
Product/ingredient
name
Identifiers
CAS: 28064-14-4
10 <25
1-methoxy-2-propanol REACH #:
01-2119457435-35
EC: 203-539-1
CAS: 107-98-2
Index: 603-064-00-3
xylene
REACH #:
01-2119488216-32
EC: 215-535-7
Date of issue
: 29.05.2015.
10 <20
5 <10
67/548/EEC
Type
Notes
Xi; R36/38
[1]
R43
N; R51/53
R10
[1] [2]
R67
STOT SE 3, H336
R10
[1] [2]
Xn; R20/21
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
ethylbenzene
CAS: 1330-20-7
Index: 601-022-00-9
REACH #:
01-2119492630-38
EC: 202-859-9
CAS: 100-51-6
Index: 603-057-00-5
REACH #:
01-2119489370-35
EC: 202-849-4
CAS: 100-41-4
Index: 601-023-00-4
Xi; R38
1 <3
Xn; R20/22
[1]
[1] [2]
F; R11
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been
assigned a workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
Occupational exposure limits, if available, are listed in Section 8.
Inhalation
Skin contact
Eye contact
Ingestion
Protection of first-aiders
: In all cases of doubt, or when symptoms persist, seek medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and seek medical advice.
: Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognised skin cleanser. Do NOT use solvents or thinners.
: Check for and remove any contact lenses. Immediately flush eyes with running
water for at least 15 minutes, keeping eyelids open. Seek immediate medical
attention.
: If swallowed, seek medical advice immediately and show the container or label.
Keep person warm and at rest. Do NOT induce vomiting.
: No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or wear
gloves.
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact
Inhalation
Skin contact
Ingestion
Over-exposure signs/symptoms
Date of issue
: 29.05.2015.
3/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
Inhalation
Skin contact
Ingestion
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
Specific treatments
Unsuitable extinguishing
media
Hazardous thermal
decomposition products
: Flammable liquid and vapour. In a fire or if heated, a pressure increase will occur
and the container may burst, with the risk of a subsequent explosion. Runoff to
sewer may create fire or explosion hazard. This material is harmful to aquatic life
with long lasting effects. Fire water contaminated with this material must be
contained and prevented from being discharged to any waterway, sewer or drain.
: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
sulfur oxides
metal oxide/oxides
Special protective
equipment for fire-fighters
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without
suitable training. Move containers from fire area if this can be done without risk.
Use water spray to keep fire-exposed containers cool.
: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves)
conforming to European standard EN 469 will provide a basic level of protection for
chemical incidents.
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Avoid breathing vapour or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
Date of issue
: 29.05.2015.
4/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities.
Large spill
: Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dilute with water and mop up if water-soluble.
Alternatively, or if water-insoluble, absorb with an inert dry material and place in an
appropriate waste disposal container. Dispose of via a licensed waste disposal
contractor.
: Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach the release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Wash spillages into an
effluent treatment plant or proceed as follows. Contain and collect spillage with noncombustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations. Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilt product.
: See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
Date of issue
: 29.05.2015.
5/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
: Not available.
: Not available.
1-methoxy-2-propanol
xylene
ethylbenzene
Recommended monitoring
procedures
Type
Exposure
xylene
Date of issue
Value
Population
Effects
Local
18,1 mg/
Consumers
kg bw/day
43,9 mg/m Consumers
Systemic
Systemic
Local
Systemic
Systemic
Systemic
Systemic
6/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
ethylbenzene
Systemic
Systemic
Systemic
90 mg/m
Workers
Systemic
47 mg/kg
bw/day
9,5 mg/kg
bw/day
28,5 mg/
kg bw/day
25 mg/kg
bw/day
5,7 mg/kg
bw/day
5 mg/kg
bw/day
8,11 mg/m
Workers
Systemic
Workers
Systemic
Consumers
Systemic
Consumers
Systemic
Consumers
Systemic
Consumers
Systemic
Consumers
Systemic
Systemic
Systemic
15 mg/m
Consumers
Systemic
1,6 mg/kg
bw/day
Consumers
Systemic
Systemic
Systemic
Systemic
Local
Systemic
xylene
benzyl alcohol
ethylbenzene
Date of issue
Type
Compartment Detail
Value
Method Detail
10 mg/l
1 mg/l
100 mg/l
7/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
0,01 mg/l
9,6 mg/l
: Use only with adequate ventilation. Use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering
controls also need to keep gas, vapour or dust concentrations below any lower
explosive limits. Use explosion-proof ventilation equipment.
Individual protection measures
Hygiene measures
Eye/face protection
: Wash hands, forearms and face thoroughly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: chemical splash
goggles.
Skin protection
Hand protection
Body protection
Date of issue
: There is no one glove material or combination of materials that will give unlimited
resistance to any individual or combination of chemicals.
The breakthrough time must be greater than the end use time of the product.
The instructions and information provided by the glove manufacturer on use,
storage, maintenance and replacement must be followed.
Gloves should be replaced regularly and if there is any sign of damage to the glove
material.
Always ensure that gloves are free from defects and that they are stored and used
correctly.
The performance or effectiveness of the glove may be reduced by physical/
chemical damage and poor maintenance.
Barrier creams may help to protect the exposed areas of the skin but should not be
applied once exposure has occurred.
Not recommended, gloves(breakthrough time) < 1 hour: PVC
May be used, gloves(breakthrough time) 4 - 8 hours: butyl rubber, nitrile rubber,
neoprene
Recommended, gloves(breakthrough time) > 8 hours: Viton, 4H, Teflon, polyvinyl
alcohol (PVA)
For right choice of glove materials, with focus on chemical resistance and time of
penetration, seek advice by the supplier of chemical resistant gloves.
The user must check that the final choice of type of glove selected for handling this
product is the most appropriate and takes into account the particular conditions of
use, as included in the user's risk assessment.
: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves. Refer to
European Standard EN 1149 for further information on material and design
requirements and test methods.
: Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
: 29.05.2015.
8/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
Environmental exposure
controls
: If workers are exposed to concentrations above the exposure limit, they must use
appropriate, certified respirators. Use respiratory mask with charcoal and dust filter
when spraying this product.(as filter combination A2-P2). In confined spaces, use
compressed-air or fresh-air respiratory equipment. When use of roller or brush,
consider use of charcoalfilter.
: Emissions from ventilation or work process equipment should be checked to
ensure they comply with the requirements of environmental protection legislation.
In some cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
: Liquid.
Colour
: Various colours.
Odour
Odour threshold
pH
: Characteristic.
: Not available.
: Not applicable.
: Not applicable.
Flash point
Evaporation rate
: Not applicable.
Burning rate
: Not applicable.
Upper/lower flammability or
explosive limits
: 1.1 - 13.1%
Vapour pressure
Vapour density
Relative density
: 1.695 g/cm
Solubility(ies)
Decomposition temperature
: Not available.
Viscosity
Explosive properties
: Not available.
Oxidising properties
: Not available.
: No specific test data related to reactivity available for this product or its ingredients.
10.3 Possibility of
hazardous reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
: Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Date of issue
: 29.05.2015.
9/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
Result
LD50 Dermal
LD50 Oral
LC50 Inhalation Gas.
LD50 Oral
LC50 Inhalation Gas.
LD50 Dermal
LD50 Oral
Species
Dose
Rabbit
Rat
Rat
Rat
Rabbit
Rabbit
Rat
Exposure
13 g/kg
6600 mg/kg
6700 ppm
4300 mg/kg
4000 ppm
>5000 mg/kg
3500 mg/kg
4 hours
4 hours
-
ATE value
Oral
Dermal
Inhalation (vapours)
33112,6 mg/kg
16006,1 mg/kg
112,4 mg/l
Irritation/Corrosion
Product/ingredient name
1-methoxy-2-propanol
Result
Species
Score
Rabbit
Rabbit
Exposure
Observation
Category
Category 3
Route of
exposure
Not applicable.
Target organs
Narcotic effects
Category
Category 2
Route of
exposure
Not determined
Target organs
ears
Aspiration hazard
Product/ingredient name
ethylbenzene
Date of issue
Result
ASPIRATION HAZARD - Category 1
: 29.05.2015.
10/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
Result
Species
Exposure
Daphnia
48 hours
Fish
Algae
Daphnia
Fish
96 hours
48 hours
48 hours
96 hours
ethylbenzene
Conclusion/Summary
: Not available.
Product/ingredient name
Aquatic half-life
Photolysis
Biodegradability
Not readily
Readily
Readily
Readily
LogPow
BCF
Potential
1-methoxy-2-propanol
xylene
benzyl alcohol
ethylbenzene
<1
3,12
1,1
3,15
8.1 to 25.9
<100
-
low
low
low
low
: Not available.
: Not available.
: Not applicable.
vPvB
: Not applicable.
Date of issue
: 29.05.2015.
11/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
: 1263
: Paint
: 3
: III
14.5 Environmental
hazards
: No.
: Transport within users premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
Additional information
ADR / RID
IMDG
14.7 Transport in bulk
according to Annex II of
MARPOL 73/78 and the
IBC Code
: Not determined.
: Not listed
: Not listed
Integrated pollution
prevention and control
list (IPPC) - Air
: Not listed
Integrated pollution
prevention and control
list (IPPC) - Water
: Not listed
Date of issue
: 29.05.2015.
12/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
: Not listed
Chemical Weapons
Convention List Schedule II
Chemicals
: Not listed
Chemical Weapons
Convention List Schedule III
Chemicals
: Not listed
: This product contains substances for which Chemical Safety Assessments are still
required.
Justification
(inhalation)
Date of issue
H336
May cause drowsiness or dizziness.
H373
May cause damage to organs through prolonged or repeated exposure.
(ears) (ears)
H411
Toxic to aquatic life with long lasting effects.
H412
Harmful to aquatic life with long lasting effects.
: Acute Tox. 4, H302
ACUTE TOXICITY (oral) - Category 4
Acute Tox. 4, H312
ACUTE TOXICITY (dermal) - Category 4
Acute Tox. 4, H332
ACUTE TOXICITY (inhalation) - Category 4
Aquatic Chronic 2, H411 LONG-TERM AQUATIC HAZARD - Category 2
Aquatic Chronic 3, H412 LONG-TERM AQUATIC HAZARD - Category 3
Asp. Tox. 1, H304
ASPIRATION HAZARD - Category 1
Eye Irrit. 2, H319
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2
Flam. Liq. 2, H225
FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3, H226
FLAMMABLE LIQUIDS - Category 3
Skin Irrit. 2, H315
SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1, H317
SKIN SENSITIZATION - Category 1
STOT RE 2, H373 (ears) SPECIFIC TARGET ORGAN TOXICITY (REPEATED
EXPOSURE) (ears) - Category 2
STOT SE 3, H336
SPECIFIC TARGET ORGAN TOXICITY (SINGLE
EXPOSURE) (Narcotic effects) - Category 3
: 29.05.2015.
13/14
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Tankguard Plus Comp A
Date of printing
: 29.05.2015.
: 24.07.2014.
Version
: 3
Notice to reader
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun
reserves the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their
needs and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United
Kingdom) version will prevail.
Date of issue
: 29.05.2015.
14/14