Spector Lumenex

Data Sheet
PM/0010h

Systems

ACET/18/NK
The ACET is a man - machine interface and facilitates operator
control of PAGA and PAVA systems. In its most basic form the ACET
comprises of a microphone transducer, preamplifier and push button selector. Building on this, the control input configuration
maybe extended to numerous push - button and indicators allowing
the operator to assert complex cause and effects.

The 24VDC is derived from the host equipment which

energises the onboard microphone preamplifier and control
electronics. The preamplifier accepts audio from the noise
cancelling microphone transducer and mixes this with inband
DTMF which is retrieved within the host equipment thereby
ensuring the operator of critical path security.
ACET/18/NK is a man machine interface designed to
facilitate operator control and address of a public address
broadcast system. The unit comprises of a modern industrial
tactile membrane keypad, hyper cardiod microphone
mounted on a flexible goose neck stem and LED status
indicator array.
ACET/18/NK can be 19 inch console/rack mounted or
supplied in a robust steel desk top enclosure. Power supply
to the unit is phantom sourced from the host equipment to
assure system security and to obviate provision of local D.C.
supply.
The ACET/18/NK panel can be fitted with the following plug
in pre-amplifier hardware depending on system application:ACET601 pre-amplifier This is fully duplicated A/B; and is
intrinsically safe for use in Zone 1 IIBT4 locations. Used on
both ACE16 and ACE100 systems. (Initiates a two tone
paging chime for keys not under the flap guard or lamp test.)
ACET602 pre-amplifier This is installed when ACE100
application is specified. Two ACET602 are required for dual
A/B operation.
ACET603 pre-amplifier This is installed when ACE4/ACE16
application is specified. Two ACET603 are required for dual
A/B operation.
ACET/18/NK specification (safe area execution) (ACE
100)
9 Keyboard 22 Configurable tactile keys of which 6 are
flap guarded to prevent accidental operation.
9 LED status Each key fitted with fully duplicated A/B LED
indicators

Morley Avenue
Mapperley
Nottingham
NG3 5FW
England

Tel: +44 (0) 115 955 11 99

Fax: +44 (0) 115 955 19 19
E-Mail: Spectorlumenex.uk@tycoint.com
http: www.spector-lumenex.co.uk

9
9

VU Meter Dual two LED bar microphone level meter

Field Cable Requirement Three pair screened cable
1.5mm2 up to 500 metres from host

ACET16/18/NK specification (safe area execution)

(ACE 16 & ACE 4)
9 Keyboard 15 pre-configured tactile keys of which 6 are
flap guarded
9 LED status Each key fitted with fully duplicated A/B LED
indicators
9 Field Cable Requirement 1 pair screened cable per
key/LED, plus 2 pair audio and supply 0.9mm2 up to 500
metres from host.
ACET18/NK/IS specification (Zone 1 hazardous area
execution)
Facilities as per the ACET/18/NK and the ACET16/18/NK,
except only two pair 1.5mm2 screened field cable required
for both ACE 16 and ACE 100.
Accessories
ACET18/NK/LCD. This is a supplementary panel that carries
either one or two LCD 22 character 2 line displays (two for
dual A/B PA System). The display describes system
operational status e.g. which operator is depressing which
key function and fault/health system status. ACET18/NK/LCD
can be attached to ACET602 pre-amplifier only making this
panel operable by ACE100 systems only.

Management
System

Non-Duplicated
System

Dual
System

Zone 1
Hazardous area
Non-Duplicated or
Dual System

ACE 4

ACET603x1

ACET603x2

ACE 16

ACET603x1

ACET603x2

ACET601

ACE 100

ACET602x1

ACET602x2

ACET601

tyco
Fire & Integrated
Solutions

ACE 4, 16, 100 Console / Rack Mount ACET

Desk Mount ACET

(Note: LCD display option on ACE 100 only)

Tyco Fire & Integrated Solutions have a policy of continuous product improvement, therefore this information is subject to change without notice.
Copyright. This publication is the property of Tyco Fire & Integrated Solutions. It may not be copied or transmitted without the express written permission of Tyco Fire & Integrated Solutions.