Documente Academic
Documente Profesional
Documente Cultură
Page 1 of 2
You are logged into Cleveland Clinic Abu Dhabi as Mirza Shabbir Ali.
SUPPORT
DOWNLOADS
DOCUMENTATION
LICENSING
Product Download
ProxySG_6.5.9.12
Files
Download Log
Notes
Download Help
Description:
238778
236364
238862
221842
237287
Component
Authentication
Description
MIB file cannot be imported when the MIB file contains a syntax error.
Kerberos constrained delegation (KCD) deployments fail when alternate UPN (User Principal
Authentication
Name) suffixes are used.
Authentication
The ProxySG was inaccessible for an hour after the restart.
IWA admin authentication to the ProxySG console hangs which may cause user authentication
Authentication
through the ProxySG to stop.
When users authenticate with IE 11 an "Invalid SAML POST" error is present when using SAML
Authentication
with Ping Federation. However, users can authenticate successfully with Chrome or Firefox.
Authentication
The Help button under "Set Banner Object" is greyed out and not available.
The ProxySG may experience a hardware restart in process group "PG_SSH" at process
CLI Consoles
"accepted@ssh" in "libsshd.exe.so" at .text+0x23a960 when there are multiple SSH
connections during a high system load.
When ICAP RESPMOD is enabled, the ProxySG fails to decode some HTTP chunked
ICAP
responses that are valid, resulting in a fatal ICAP error.
Policy
Rules in a policy layer are not evaluated if followed by "http.request.data.8192.regex=."
SSL/TLS and PKI Marked DES ciphers as low strength in response to Sweet32 vulnerability (CVE-2016-2183).
SSL Proxy
Policy rule for trust-destination-ip is not working for SSL sites even though it matches.
TCP/IP and
The ProxySG may experience a watchdog restart in process "idler 0" in "kernel.exe"
General
at .text+0x12af15d.
Networking
Component
237711
Boot
239057
CLI Consoles
Description
On an S400 or S500, if a system image on one of the boot devices is corrupted but the
redundant copy on the other boot device is valid, the system image will be marked as failed. If
the system image is the default system image, then another system image will be selected as
the default. As a work around to this issue, the system image that is marked as failed must be
manually selected at image selection time.
The "view client-key" command does not give the correct output in FIPS mode.
3 Files
https://bluecoat.flexnetoperations.com/control/blct/download?agree=Accept&element=8134017
16-10-2016
File Description
MIBS_SG6.5_192685.zip
Page 2 of 2
File Size
File Name
175.3 KB
MIBS_SG6.5_192685.zip
ProxySG_6.5.9.12_192685_x64.bcsi
101 MB
ProxySG_6.5.9.12_192685_x64.bcsi
SGOS_signatures.txt
5.5 KB
SGOS_signatures.txt
Information
FAQs
Site Map
Copyright 2015, Blue Coat Systems, Inc. All rights reserved.
https://bluecoat.flexnetoperations.com/control/blct/download?agree=Accept&element=8134017
16-10-2016