Documente Academic
Documente Profesional
Documente Cultură
By:
Checked:
README
Directions:
This spreadsheet is to be used as an aid for designing and analyzing MSE walls. The spreadsheet contains five tabs:
"README", "INPUT", "WORKSHEET_FINAL", "WORKSHEET_CONSTR", and "OUTPUT". The "README" tab
outlines the design criteria and provides sketches of various MSE wall configurations. The "INPUT" tab contains all the
input necessary to complete the design/analysis of the MSE wall. The "WORKSHEET_FINAL" tab performs all internal
and external stability calculations for the completed in-service MSE wall structure. The "WORKSHEET_CONSTR" tab
performs the external and internal stability calculations for the temporary construction loading condition. The
"OUTPUT" tab presents an output table which summarizes the external and internal stability checks, indicates the
controlling design locations, and calculates performance ratios for the controlling locations. The performance ratio is
taken as a ratio of the allowable to the actual. Performance ratios greater than or equal to 1.0 are "OK", while
performance ratios less than 1.0 are "NG!". For further information, refer to the Manual for this spreadsheet.
Design Criteria:
AASHTO LRFD Bridge Design Specifications 5th Edition with 2010 Interim Revisions, Section 11.10 Mechanically
Stabilized Earth Walls. Any sections referenced in Section 11.10 will follow the AASHTO LRFD as modified by
PennDOT Design Manual Part 4 (DM-4), Part B Design Specifications, except as noted.
Color Coding:
- Denotes Input Cells
- Internal Calculations by the spreadsheet
- External Stability Checks
Red Text - Red Text will indicate warnings and errors where applicable
Sketches:
By:
Checked:
README
Figure 3. AASH
Distribution for
By:
Checked:
README
By:
Checked:
README
Discontinuous Geosynthetic Sheets:
Figure 18. AASHTO Figure 11.10.6.4-1 Reinforcement Coverage Ratio for Metal
Reinforcement
Date:
Date:
README
.10 Mechanically
s modified by
sure
Date:
Date:
README
Date:
Date:
README
us Geosynthetic Sheets:
ith Layer
Date:
Date:
README
us Geosynthetic Sheets:
By:
Checked:
Date:
Date:
INPUT
INPUT DATA:
Description
Variable
Height of wall:
H=
Lwall =
Units
Value
ft
15.97
ft
43.16
ft
--------->
deg
0.46
h
WARNINGS / ERRORS:
External Geometry:
Length of wall:
Twall =
Thickness of wall facing elements:
Type of backfill slope: h = horizontal, s = sloping, b = broken
=
Angle of backfill slope:
hB =
Height of backfill above wall (for broken backfill only):
Is there an abutment (supported on piles) in the reinforcing zone? y = yes, n = no
Ah =
Total height of fill behind abutment, from bottom of footing to bottom of roadway (see Figure 14):
Thickness of abutment footing (see Figure 14):
ft
--------->
ft
7.64
Af =
ft
Ad =
ft
--------->
1
n
Distance from bottom of abutment footing to top of wall (see Figure 14):
Is there an abutment backwall present? y = yes, n = no
cf =
Dist. from back of wall to front edge of abutment, or to back face of barrier (see Figures 11 & 14):
ft
0.53
Width of abutment footing or barrier moment slab (see Figures 11 & 14):
bf =
ft
5.25
pw =
ft
d=
ft
3.155
r =
pcf
120
r =
deg
34
f =
pcf
120
deg
--------->
30
s
deg
31
f =
Friction angle of retained fill (embankment backfill):
Is the base material soil or rock? s = soil, r = rock
b =
Friction angle of base soil:
334809043.xlsx INPUT
Page 9 of 132
10/26/2016 14:39:56
By:
Checked:
Date:
Date:
INPUT
Saturated unit weight of base soil:
Moist unit weight of base soil:
cohesion of base soil:
' =
m =
c=
Su =
Df =
pcf
120
pcf
tsf
115
0
tsf
ft
--------->
dim
3
n
dim
ied bearing capacity factor for walls adjacent to slopes (cohesionless term) [Fig. A10.6.3.1.2c-2]:
Nq =
dim
Co =
tsf
Depth from footing base down to highest anticipated groundwater level [D10.6.3.1.2gP]:
zw =
ft
Nms =
=
dim
dim
1.00
b =
dim
0.45
s =
dim
1.00
334809043.xlsx INPUT
Page 10 of 132
10/26/2016 14:39:56
By:
Checked:
Date:
Date:
INPUT
Loading Information:
Unit weight of wall facing elements (for wall self-weight):
Weight of roadway dead load (wearing surface, subbase, etc.):
Equivalent height of soil for live load surcharge (LS) [D3.11.6.4]:
DC =
DW =
heq =
kcf
ksf
0.150
0.09
ft
ft
Equivalent height of soil for temporary construction live load surcharge (LS) [D11.6.1.2]:
heq_t =
Horizontal traffic impact/collision load on barrier, for tension (10k/5ft = 2.0 k/ft) [A11.10.10.2]:
PH1 (tens) =
k/ft
Horizontal traffic impact/collision load on barrier, for pullout (10k/20ft = 0.5 k/ft) [A11.10.10.2]:
PH1 (pull) =
k/ft
PV =
k/ft
2.363
Horizontal force per foot on abutment due to unfactored longitudinal superstructure loads:
PH1a =
k/ft
1.4
--------->
--------->
--------->
--------->
--------->
s
r
n
(Enter in table below)
n
n
deg
--------->
ksi
60
ft
21
L=
Z1 =
ft
1.5
Sv =
ft
2.46
Sh =
ft
334809043.xlsx INPUT
ft
--------->
--------->
Page 11 of 132
10/26/2016 14:39:56
By:
Checked:
Date:
Date:
INPUT
Width of reinforcing strips or grids:
in.
each
in.
in.
in.
in.
in.2
t=
Ac* =
RFID =
dim
RFCR =
dim
RFD =
dim
dim
dim
dim
dim
dim
dim
dim
CRcr =
=
=
=
=
Srs =
t/ft
Srt =
t/ft
334809043.xlsx INPUT
Page 12 of 132
b=
Nb =
Tr =
D=
St =
C=
Cu =
10/26/2016 14:39:56
By:
Checked:
Date:
Date:
INPUT
Z1a =
ft
5.39
Vertical spacing of reinforcement, if applicable (Enter "v" for variable, see Figure 14):
Sva =
ft
0.75
Factored Facing unit connection capacity for Strength limit state: CC (STR) =
Factored Facing unit connection capacity for Extreme Event limit state: CC (EXT) =
AS =
Seismic peak ground acceleration coefficient, modified by short-period site factor (A3.10.4):
t/ft
t/ft
Other:
dim
Depth, Z
ft
1.50
3.96
6.42
8.88
11.34
13.80
-------------
Sv
Sh
ft
2.73
2.46
2.46
2.46
2.46
3.40
-------------
ft
2.48
2.48
2.48
2.48
2.48
2.48
334809043.xlsx INPUT
b
in.
2
2
2
2
2
2
Nb
Tr
each
in.
0.163
0.163
0.163
0.163
0.163
0.163
D
in.
Page 13 of 132
St
in.
6
t
in.
LAYERS OF REINFORCEMENT
Ac*
CRcr
Srs
in.
dim
t/ft
10/26/2016 14:39:56
By:
Checked:
-------------------------------------------------------------
334809043.xlsx INPUT
Date:
Date:
INPUT
-------------------------------------------------------------
Page 14 of 132
10/26/2016 14:39:56
By:
Checked:
Date:
Date:
-----------------
INPUT
-----------------
Depth, Za
Sv
Sh
ft
5.39
6.14
6.89
---------------
ft
1.13
0.75
1.13
---------------
ft
2.48
2.48
2.48
334809043.xlsx INPUT
b
in.
2
2
2
Nb
Tr
each
in.
0.163
0.163
0.163
D
in.
Page 15 of 132
St
in.
3
t
in.
LAYERS OF REINFORCEMENT
Ac*
CRcr
Srs
in.
dim
t/ft
10/26/2016 14:39:56
By:
Checked:
334809043.xlsx INPUT
Date:
Date:
INPUT
Page 16 of 132
10/26/2016 14:39:56
WARNINGS / ERRORS:
WARNING - MSE Wall design requires check of specified backfill weight ranging from 90pcf to 120pcf per BC-799M. User is responsible for checking the minimum and maximum va
ka f =
0.040
>
0.035
ksf/ft
--->
334809043.xlsx INPUT
Page 17 of 132
10/26/2016 14:39:56
334809043.xlsx INPUT
Page 18 of 132
10/26/2016 14:39:56
334809043.xlsx INPUT
Page 19 of 132
10/26/2016 14:39:56
334809043.xlsx INPUT
Page 20 of 132
10/26/2016 14:39:56
SE WALL
Srt
t/ft
CC (STR)
t/ft
5
5
5
5
5
5
CC (EXT)
t/ft
6
6
6
6
6
6
334809043.xlsx INPUT
Loverlap
ft
WARNINGS / ERRORS:
(NOTE: ONLY LAYER #1 IS CHECKED)
Page 21 of 132
10/26/2016 14:39:56
334809043.xlsx INPUT
Page 22 of 132
10/26/2016 14:39:56
MENT
Srt
t/ft
CC (STR)
t/ft
5
5
5
334809043.xlsx INPUT
Page 23 of 132
10/26/2016 14:39:56
334809043.xlsx INPUT
Page 24 of 132
10/26/2016 14:39:56
By:
Chk'd:
WORKSHEET_FINAL
Units
Date:
Date:
Horiz.
Type of Backfill
Sloping
Broken
USE
ka
0.333
0.333
0.333
0.333
0.00
22.61
0.00
15.97
0.00
15.97
0.00
22.61
ft
h
H2
22.61
15.97
15.97
22.61
ft
H1
15.97
15.97
15.97
15.97
ft
l1
10.87
10.87
10.87
10.87
ft
l2
0.00
0.00
0.00
0.00
0.00
deg
ft
ft
Z2_ext
ft
D1_Z2
0.00
ft
D1_H
0.00
ft
Aw
ft
x
bfi
%
ft
Unfactored Loads:
Force resultant of earth pressure from retained fill (EH)
Horizontal component of Pa force
Vertical component of Pa force
Vertical load of reinforced soil mass (EV)
334809043.xlsx WORKSHEET_FINAL
deg
13.05
9.22
9.22
20.47
100.0%
bfe
0.0%
21.46
B
r
Units
13.05
62.00
Horiz.
Sloping
Broken
USE
Moment
arm from
toe (ft)
t/ft
Pa
t/ft
Pah
5.11
5.11
5.11
5.11
7.54
t/ft
Pav
0.00
0.00
0.00
0.00
21.46
t/ft
V1
20.12
10.96
Page 25 of 132
5.11
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
t/ft
V2
0.00
14.46
t/ft
t/ft2
V3
0.55
0.23
q LS
0.18
t/ft
q LS_int
0.13
t/ft
F1_q LS
2.74
2.74
2.74
13.85
t/ft
F2_q LS
1.36
0.96
1.36
11.31
t/ft
t/ft2
F2a_q LS
0.46
0.46
0.46
q DW
0.05
t/ft
q DW_int
0.03
t/ft
F1_q DW
0.68
0.68
0.68
13.85
t/ft
F2_q DW
0.34
0.24
0.34
11.31
t/ft
t/ft2
F2a_q DW
0.11
0.11
0.11
q ES
0.40
t/ft2
q ES_int
0.29
t/ft
F1_q ES
6.06
6.06
6.06
t/ft
F2a_EH
0.58
0.58
0.58
t/ft
PV
1.18
t/ft
PV_ext
1.18
3.62
t/ft
Fp (Pv)
0.00
0.00
t/ft
PH1a
0.70
12.35
t/ft
PH1
0.00
18.99
t/ft
PH1_pullout
0.00
334809043.xlsx WORKSHEET_FINAL
Page 26 of 132
0.00
0.00
0.00
13.85
13.85
10/26/2016 14:39:56
By:
Chk'd:
334809043.xlsx WORKSHEET_FINAL
Date:
Date:
WORKSHEET_FINAL
t/ft
PH2
Page 27 of 132
0.00
22.61
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
Seismic Loads:
Units
Horiz.
Sloping
Broken
USE
Am
0.07
0.76
7.99
0.00
18.18
t/ft
Pir
t/ft
Pis
t/ft
0.5 PAE
t/ft
0.5 PAEh
0.40
0.40
0.40
0.40
13.57
t/ft
0.5 PAEv
0.00
0.00
0.00
0.00
21.46
t/ft
Wa
3.44
3.44
#DIV/0!
3.44
t/ft
Pi
0.24
0.24
#DIV/0!
0.24
0.00
0.00
0.00
0.40
Load Factors:
LOAD
FACTOR
DC
DW v
DW h
EV [1]
EH [1]
ESv
ESh
LS
EQ
CT
Notes:
1.00
MIN
0.90
MAX
1.25
MIN
0.90
MAX
1.25
EXTREME I
MIN
MAX
0.90
1.25
1.00
0.65
1.50
0.65
1.50
0.65
1.50
1.00
1.00
1.00
1.50
1.00
1.50
1.50
1.35
1.50
1.50
1.00
1.50
1.50
1.35
1.50
1.50
1.00
1.50
1.35
1.00
0.75
1.50
0.75
1.50
0.75
1.00
1.00
1.50
1.75
1.50
1.75
1.50
1.50
1.50
0.00
1.00
SERV I
[1]
STR I
STR III
EXTREME II
MIN
MAX
0.90
1.25
1.00
1.50
1.35
1.50
1.50
0.75
1.50
1.50
0.00
1.00
1.50
0.50
1.50
0.50
1.00
1.00
Factors for EV and EH for redundancy check are 1.0 and 1.1, respectively [D11.10.6.4.5P]
334809043.xlsx WORKSHEET_FINAL
Page 28 of 132
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
FACTORED LOADS:
VERTICAL:
V3
(DC)
V1
(EV)
V2
Pav
(EH)
PV_ext
F1_q DW
(ESv)
F1_q ES
F1_q LS
(LS)
0.5 PAEv
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
EXTREME II
MIN
MAX
0.55
0.50
0.69
0.50
0.69
0.50
0.69
0.50
0.69
20.12
20.12
27.16
20.12
27.16
20.12
27.16
20.12
27.16
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1.18
0.89
1.77
0.89
1.77
0.89
1.77
0.89
1.77
0.68
0.51
1.03
0.51
1.03
0.51
1.03
0.51
1.03
6.06
4.55
9.10
4.55
9.10
4.55
9.10
4.55
9.10
2.74
4.79
4.79
0.00
0.00
0.00
0.00
1.37
1.37
SERV I
STR I
STR III
(EQ)
V (bearing) =
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
31.34
31.36
44.54
26.57
39.75
26.57
39.75
27.94
41.12
t/ft
28.60
26.57
39.75
26.57
39.75
26.57
39.75
26.57
39.75
t/ft
334809043.xlsx WORKSHEET_FINAL
Page 29 of 132
10/26/2016 14:39:56
By:
Chk'd:
(EH)
F2_q DW
PH1a
(ESh)
Fp (Pv)
F2_q LS
(LS)
Pir
Pis
(EQ)
0.5 PAEh
PH1
PH2
(CT)
H=
Date:
Date:
WORKSHEET_FINAL
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
EXTREME II
MIN
MAX
5.11
7.67
7.67
7.67
7.67
0.00
0.00
7.67
7.67
0.34
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.70
1.05
1.05
1.05
1.05
1.05
1.05
1.05
1.05
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1.36
2.37
2.37
0.00
0.00
0.00
0.00
0.68
0.68
0.00
0.00
0.00
0.00
0.00
0.76
0.76
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.40
0.40
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
7.51
0.00
11.60
0.00
11.60
0.00
9.23
0.00
9.23
0.00
2.72
0.00
2.72
0.00
9.91
0.00
9.91
Moment
Arm (ft)
SERV I
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
EXTREME II
MIN
MAX
0.23
0.13
0.11
0.16
0.11
0.16
0.11
0.16
0.11
0.16
10.96
220.54
220.54
297.73
220.54
297.73
220.54
297.73
220.54
297.73
14.46
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
21.46
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
SERV I
STR I
STR III
t/ft
EXTERNAL STABILITY:
OVERTURNING:
Vertical Load
Moments:
V3
(DC)
V1
V2
Pav
(EV)
(EH)
334809043.xlsx WORKSHEET_FINAL
STR I
STR III
Page 30 of 132
10/26/2016 14:39:56
By:
Chk'd:
(ESv)
F1_q ES
0.5 PAEv
(EQ)
MV =
Horizontal Load
Moments:
Pah
(EH)
F2_q DW
PH1a
(ESh)
Fp (Pv)
F2_q LS
(LS)
Pir
Pis
(EQ)
0.5 PAEh
PH1
PH2
(CT)
Date:
Date:
WORKSHEET_FINAL
3.62
4.27
3.20
6.41
3.20
6.41
3.20
6.41
3.20
6.41
13.85
9.49
7.11
14.23
7.11
14.23
7.11
14.23
7.11
14.23
13.85
83.98
62.99
125.97
62.99
125.97
62.99
125.97
62.99
125.97
21.46
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
318.40
293.96
444.49
293.96
444.49
293.96
444.49
293.96
444.49
Moment
Arm
SERV I
7.54
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
38.53
57.79
57.79
57.79
57.79
0.00
0.00
57.79
57.79
11.31
3.83
5.75
5.75
5.75
5.75
5.75
5.75
5.75
5.75
12.35
8.64
12.96
12.96
12.96
12.96
12.96
12.96
12.96
12.96
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
11.31
15.34
26.84
26.84
0.00
0.00
0.00
0.00
7.67
7.67
7.99
0.00
0.00
0.00
0.00
0.00
6.05
6.05
0.00
0.00
18.18
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
13.57
0.00
0.00
0.00
0.00
0.00
5.46
5.46
0.00
0.00
18.99
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
22.61
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
66.34
103.35
103.35
76.51
76.51
30.23
30.23
84.18
84.18
MH =
334809043.xlsx WORKSHEET_FINAL
STR I
STR III
Page 31 of 132
EXTREME II
MIN
MAX
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
ECCENTRICITY:
1
SERV I
3
MAX
39.75
STR III
MIN
MAX
26.57
39.75
6
7
EXTREME I
MIN
MAX
26.57
39.75
STR I
8
9
EXTREME II
MIN
MAX
26.57
39.75
V=
Xo
(t/ft)
28.60
MIN
26.57
(ft)
8.81
7.18
8.58
8.19
9.26
9.93
10.42
7.90
9.06
eB
(ft)
1.92
3.55
2.15
2.54
1.47
0.80
0.31
2.83
1.67
(ft)
PERF. RATIO =
CONTROLLING = 1
Check eB eB max:
5.37
2.80
0
5.37
1.51
1
5.37
2.50
0
5.37
2.11
0
5.37
3.64
0
5.37
6.68
0
5.37
17.42
0
5.37
1.89
0
5.37
3.22
0
OK
OK
OK
OK
OK
OK
OK
OK
OK
eB max
SLIDING:
For Cohesionless soil or rock
R = V * tan
[D10.6.3.4-1]
R = V * tan + ca B'
[D10.6.3.4-3P]
31.0
0.00
SERV I
STR I
V=
B' =
R =
(t/ft)
(ft)
(t/ft)
28.60
17.62
17.19
MIN
26.57
14.35
15.96
RR =
(t/ft)
17.19
15.96
334809043.xlsx WORKSHEET_FINAL
deg
tsf
[A11.10.5.3]
[D10.6.3.4-3P, expressed as tons/ft2]
MAX
39.75
17.17
23.88
STR III
MIN
MAX
26.57
39.75
16.37
18.52
15.96
23.88
EXTREME I
MIN
MAX
26.57
39.75
19.85
20.84
15.96
23.88
EXTREME II
MIN
MAX
26.57
39.75
15.79
18.13
15.96
23.88
23.88
15.96
15.96
15.96
23.88
Page 32 of 132
23.88
23.88
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
7.51
2.29
0
11.60
1.38
1
11.60
2.06
0
9.23
1.73
0
9.23
2.59
0
2.72
5.87
0
2.72
8.78
0
9.91
1.61
0
9.91
2.41
0
OK
OK
OK
OK
OK
OK
OK
OK
OK
334809043.xlsx WORKSHEET_FINAL
Page 33 of 132
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
BEARING:
Bearing Capacity Factors:
Nc =
32.67
[C10.6.3.1.2a-2P or 3P (DM-4)]
(Note: For walls adjacent to slopes, the user input N cq term will be used in p
N =
25.99
[C10.6.3.1.2a-4P (DM-4)]
(Note: For walls adjacent to slopes, the user input N q term will be used in p
Nq =
D=
=
20.63
18.97
0.06
90
L > 5B ?
NO
[C10.6.3.1.2a-1P (DM-4)]
[D10.6.3.1.2gP-6]
weighted average of soil unit weight (tons per cubic foot) [D10.6.3.1.2gP]
ft
tcf
deg
[D10.6.3.1.2a]
V=
Xo =
(t/ft)
31.34
MIN
31.36
MAX
44.54
MIN
26.57
MAX
39.75
EXTREME I
MIN
MAX
26.57
39.75
(ft)
9.25
8.20
9.15
8.19
9.26
9.93
10.42
8.19
9.22
eB =
(ft)
(ft)
1.48
18.51
2.53
16.39
1.58
18.30
2.54
16.37
1.47
18.52
0.80
19.85
0.31
20.84
2.54
16.38
1.51
18.45
SERV I
B' =
sc =
STR I
STR III
EXTREME II
MIN
MAX
27.94
41.12
1.27
1.24
1.27
1.24
1.27
1.29
1.30
1.24
1.27
s =
0.83
0.85
0.83
0.85
0.83
0.82
0.81
0.85
0.83
sq =
1.26
1.23
1.25
1.23
1.26
1.28
1.29
1.23
1.26
ic =
i =
iq =
n=
qn (soil) =
0.61
0.48
0.42
0.28
0.58
0.44
0.45
0.31
0.62
0.49
0.83
0.75
0.88
0.83
0.44
0.30
0.61
0.48
0.63
1.70
0.45
1.72
0.60
1.70
0.48
1.73
0.64
1.70
0.83
1.68
0.89
1.67
0.47
1.72
0.63
1.70
18.14
16.50
17.98
16.48
18.15
19.20
19.97
16.48
18.10
(tsf)
334809043.xlsx WORKSHEET_FINAL
Page 34 of 132
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
qult (soil) =
(tsf)
8.64
5.14
8.03
5.57
8.84
13.41
15.11
5.43
8.59
qn (rock) =
(tsf)
---
---
---
---
---
---
---
---
---
qn =
(tsf)
8.64
5.14
8.03
5.57
8.84
13.41
15.11
5.43
8.59
(tsf)
q=
(tsf)
PERF. RATIO =
CONTROLLING = 1
Check qR q:
3.89
1.69
2.30
0
2.31
1.91
1.21
1
3.61
2.43
1.48
0
2.51
1.62
1.54
0
3.98
2.15
1.85
0
13.41
1.34
10.02
0
15.11
1.91
7.92
0
2.44
1.71
1.43
0
3.86
2.23
1.73
0
OK
OK
OK
OK
OK
OK
OK
OK
OK
qR =
INTERNAL STABILITY:
0.283
0.00
ft
2.06
ft
[D3.11.5.8.1-4]
[A11.10.6.2.1-2]
Z2 for distribution of PV surcharge for internal stability [A3.11.6.3-1]
12.56
ft
Z2 for distribution of surcharge pressures for internal stability (i.e. q DW_int, q LS_int, q ES_int)
0.58
0.16
0.47
3.40
16.00
84.00
39.48
mil./yr. =
mil./yr. =
mil./yr. =
mils
yrs
yrs
mils =
334809043.xlsx WORKSHEET_FINAL
[A11.10.6.4.2a]
0.00058 in./yr.
0.00016 in./yr.
0.00047 in./yr.
0.03948 in.
Page 35 of 132
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
[A11.10.6.4.3b]
Tensile Resistance
Layer
#
1
2
3
4
5
6
-----------------------------------
Depth, Z
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----------------------------------
Tr
Ec
(in.)
0.16
0.16
0.16
0.16
0.16
0.16
-----------------------------------
(in.)
0.08
0.08
0.08
0.08
0.08
0.08
-----------------------------------
334809043.xlsx WORKSHEET_FINAL
D*
(in.)
-0.08
-0.08
-0.08
-0.08
-0.08
-0.08
-----------------------------------
Ac (steel)
Ac (geo.)
Ac
Rc
Tal
Tult
Tal
(steel)
(geosynth.)
(geosynth.)
(in.2)
0.17
0.17
0.17
0.17
0.17
0.17
-----------------------------------
(in.2)
0.33
0.33
0.33
0.33
0.33
0.33
-----------------------------------
(in.2)
0.17
0.17
0.17
0.17
0.17
0.17
-----------------------------------
ratio
0.067
0.067
0.067
0.067
0.067
0.067
-----------------------------------
(t/ft)
30.25
30.25
30.25
30.25
30.25
30.25
-----------------------------------
(t/ft)
-----------------------------------------------
(t/ft)
-----------------------------------------------
Page 36 of 132
10/26/2016 14:39:56
By:
Chk'd:
-------------------------------------------------------
-------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
Page 37 of 132
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
P =
1.35
[A11.10.6.2.1-1]
EH =
1.10
[D11.10.6.4.5P]
EV =
1.00
[D11.10.6.4.5P]
Layer
Depth, Z
Sv
D1 (Pv)
D1 (q_int)
kr / ka
(strength)
(STR)
(STR_no LS)
(EXT-II)
(STR)
#
1
2
3
4
5
6
-------------------------
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-------------------------
(ft)
2.73
2.46
2.46
2.46
2.46
3.40
-------------------------
(ft)
5.75
7.26
8.49
9.72
10.95
12.18
-------------------------
(ft)
15.47
16.70
17.93
19.16
20.39
21.00
-------------------------
coeff.
1.66
1.60
1.54
1.48
1.42
1.36
-------------------------
coeff.
0.47
0.45
0.44
0.42
0.40
0.38
-------------------------
(tsf)
0.21
0.16
0.14
0.12
0.11
0.10
-------------------------
(tsf)
0.91
0.97
1.05
1.15
1.25
1.38
-------------------------
(tsf)
0.73
0.80
0.90
1.01
1.12
1.25
-------------------------
(tsf)
0.82
0.89
0.98
1.08
1.19
1.31
-------------------------
(tsf)
0.00
0.00
0.00
0.00
0.00
0.00
-------------------------
334809043.xlsx WORKSHEET_FINAL
kr
Page 38 of 132
10/26/2016 14:39:56
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 39 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
-----
-----
STRENGTH CHECKS:
-----
Date:
Date:
WORKSHEET_FINAL
-----
-----
-----
-----
-----
-----
-----
-----
Layer
Depth, Z
t Tal Rc
Tmax
#
1
2
3
4
5
6
-------------------------
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-------------------------
(t/ft)
1.52
1.52
1.52
1.52
1.52
1.52
-------------------------
(t/ft)
1.57
1.46
1.52
1.60
1.67
2.42
-------------------------
334809043.xlsx WORKSHEET_FINAL
Check
t Tal Rc [1]
NG!
OK
OK
NG!
NG!
NG!
-------------------------
t Tal Rc
Tmax
(t/ft)
1.02
1.02
1.02
1.02
1.02
1.02
-------------------------
(t/ft)
1.28
1.19
1.24
1.30
1.36
1.97
-------------------------
Page 40 of 132
Check
t Tal Rc
NG!
NG!
NG!
NG!
NG!
NG!
-------------------------
Connection Strength
(controlling of STR & EXT)
t Tac Rc
or CC
Tmax
(t/ft)
5.00
5.00
5.00
5.00
5.00
5.00
-------------------------
(t/ft)
1.57
1.46
1.52
1.60
1.67
2.42
-------------------------
Check
t Tac Rc [1]
OK
OK
OK
OK
OK
OK
-------------------------
Static Componen
TSrs
(t/ft)
-------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 41 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
----Notes:
----[1]
-----
Date:
Date:
WORKSHEET_FINAL
-----
-----
-----
-----
-----
-----
-----
-----
Items marked with asterisk ( * ) indicates that Extreme II (CT) case controls the design.
334809043.xlsx WORKSHEET_FINAL
Page 42 of 132
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
REINFORCEMENT PULLOUT:
[Figure A11.10.6.3.2-1]
Type:
Geotextiles / geogrids
For Z or Zp 20 ft:
0.67 tan r =
0.45
For Z or Zp < 20 ft :
0.67 tanr =
0.45
tan r =
MIN (1.2 + log Cu, 2.0) - Zp { [MIN (1.2 + log Cu, 2.0) - tan r] / 20
0.40 =
10 (t / St) =
Steel grids
Scale Effect Correction Factor, :
Steel Reinforcements
Geogrids
Geotextiles
=
0.67
0.40
0.40 =
0.40
20 (t / St) - 10 (t / St) (Zp / 20)
0.00
[Table A11.10.6.3.2-1]
1.0
0.8
0.6
1.0
Tmax (for pullout calcs)
Layer
Depth, Z
Zp
#
1
2
3
4
5
6
-----
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
334809043.xlsx WORKSHEET_FINAL
La
Le
kr
Z+S
(active zone)
(eff. length)
F*
(pullout)
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
(ft)
4.79
4.79
4.79
4.25
2.78
1.30
-----
(ft)
16.21
16.21
16.21
16.75
18.22
19.70
-----
factor
1.72
1.58
1.44
1.30
1.16
1.02
-----
coeff.
0.47
0.45
0.44
0.42
0.40
0.38
-----
Page 43 of 132
Tmax
(tsf)
0.46
0.49
0.53
0.57
0.61
0.64
-----
(t/ft)
1.27
1.21
1.30
1.40
1.49
2.19
-----
(EXT-II)
(EXT-II)
(tsf)
0.00
0.00
0.00
0.00
0.00
0.00
-----
(tsf)
0.52
0.54
0.57
0.61
0.64
0.68
-----
10/26/2016 14:39:56
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 44 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
-------------------------
-------------------------
-------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
EXT-I
Am =
0.07
Wa =
3.44
EQ =
1.00
Pi =
0.24
tons/ft
Le =
103.3
ft
tons/ft
TENSILE STRENGTH
PULLOUT RESISTANCE
Geosynthetic Rupture
Layer
Depth, Z
Tmd
#
1
2
(ft)
1.50
3.96
(t/ft)
0.038
0.038
334809043.xlsx WORKSHEET_FINAL
H (EXT-I)
Tmax
Ttotal
t Tal Rc
(tsf)
0.46
0.49
(t/ft)
1.27
1.21
(t/ft)
1.31
1.25
(t/ft)
2.03
2.03
Page 45 of 132
Check
t Tal Rc
OK
OK
Static
TSrs > Tmax
Dynamic
TSrt > Tmd
-----
-----
H (EXT-I)
Tmax
(tsf)
0.46
0.49
(t/ft)
1.27
1.21
10/26/2016 14:39:56
By:
Chk'd:
6.42
8.88
11.34
13.80
-----------------------------------------------------
0.038
0.039
0.043
0.046
-----------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
0.53
0.57
0.61
0.64
-----------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
1.30
1.40
1.49
2.19
-----------------------------------------------------
1.34
1.44
1.53
2.24
-----------------------------------------------------
2.03
2.03
2.03
2.03
-----------------------------------------------------
Page 46 of 132
OK
OK
OK
NG!
-----------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
0.53
0.57
0.61
0.64
-----------------------------------------------------
1.30
1.40
1.49
2.19
-----------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
-------------------------------------
-------------------------------------
-------------------------------------
Date:
Date:
WORKSHEET_FINAL
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
Geosynthetic Reinforcements:
Layer
Depth, Z
Ttotal
CC (EXT)
Check
#
1
2
3
(ft)
1.50
3.96
6.42
(t/ft)
1.31
1.25
1.34
(t/ft)
6.00
6.00
6.00
CC (EXT)
OK
OK
OK
334809043.xlsx WORKSHEET_FINAL
Long-Term Strength
Ttotal
Tult
(t/ft)
1.31
1.25
1.34
(t/ft)
-------
Page 47 of 132
t Tac Rc
(t/ft)
-------
Static Component
Tmax
TSrs (static)
(t/ft)
1.27
1.21
1.30
(t/ft)
-------
Check
TSrs
-------
10/26/2016 14:39:56
By:
Chk'd:
8.88
11.34
13.80
-------------------------------------------------------
1.44
1.53
2.24
-------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
6.00
6.00
6.00
-------------------------------------------------------
Date:
Date:
WORKSHEET_FINAL
OK
OK
OK
-------------------------------------------------------
1.44
1.53
2.24
-------------------------------------------------------
-------------------------------------------------------------
Page 48 of 132
-------------------------------------------------------------
-------------------------------------------------------------
1.40
1.49
2.19
-------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:56
By:
Chk'd:
-----------------------------------
-----------------------------------
INTERNAL STABILITY:
Layer
#
1
2
3
-----
-----------------------------------
Date:
Date:
WORKSHEET_FINAL
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
Ac (steel)
Ac (geo.)
Ac
Rc
Tal (steel)
(in.2)
0.17
0.17
0.17
-----
(in.2)
0.33
0.33
0.33
-----
(in.2)
0.17
0.17
0.17
-----
ratio
0.067
0.067
0.067
-----
(t/ft)
30.25
30.25
30.25
-----
-----------------------------------
-----------------------------------
Depth, Za
Tr
Ec
(ft)
5.39
6.14
6.89
-----
(in.)
0.16
0.16
0.16
-----
(in.)
0.08
0.08
0.08
-----
334809043.xlsx WORKSHEET_FINAL
D*
(in.)
-0.08
-0.08
-0.08
-----
Page 49 of 132
Tensile Resistance
Tult (geo.)
Tal (geo.)
(t/ft)
-----------
(t/ft)
-----------
10/26/2016 14:39:56
By:
Chk'd:
-----------
-----------
-----------
REINFORCEMENT STRENGTH:
(Abutment Reinf.)
WORKSHEET_FINAL
-----------
-----------
-----------
-----------
-----------
-----------
-----------
-----------
STR-I, STR-III
Tensile
Resist.
Layer
Depth, Za
Sv
kr / ka
kr
Tmax
#
1
2
3
---------------
(ft)
5.39
6.14
6.89
---------------
(ft)
1.13
0.75
1.13
---------------
coeff.
1.57
1.55
1.53
---------------
(strength)
(tsf)
0.55
0.59
0.64
---------------
(tsf)
0.23
0.23
0.23
---------------
(tsf)
0.64
0.67
0.69
---------------
(t/ft)
0.72
0.50
0.77
---------------
REINFORCEMENT PULLOUT:
(Abutment Reinf.)
Date:
Date:
0.44
0.44
0.43
---------------
Connection
Strength
Check
t Tal Rc
Check
t Tac Rc
OK
OK
OK
---------------
---------------------
Check
CC (STR)
OK
OK
OK
---------------
Layer
Depth, Za
La
Le
F*
kr
v (no LS)
(ft)
(ft)
(ft)
factor
(pullout)
(tsf)
(tsf)
(tsf)
334809043.xlsx WORKSHEET_FINAL
Page 50 of 132
STRENGTH
Tmax
Le (req'd)
(t/ft)
(ft)
Check
Le
10/26/2016 14:39:56
By:
Chk'd:
5.39
6.14
6.89
---------------
1.35
0.90
0.45
---------------
334809043.xlsx WORKSHEET_FINAL
13.87
14.32
14.77
---------------
Date:
Date:
WORKSHEET_FINAL
1.72
1.58
1.44
---------------
0.44
0.44
0.43
---------------
0.37
0.41
0.46
---------------
Page 51 of 132
0.23
0.23
0.23
---------------
0.54
0.56
0.58
---------------
0.60
0.42
0.66
---------------
7.86
5.31
8.20
---------------
OK
OK
OK
---------------
10/26/2016 14:39:56
By:
Chk'd:
Date:
Date:
WORKSHEET_FINAL
EXT-I
Wa =
0.79
EQ =
1.00
Pi =
0.06
tons/ft
Le =
42.96
ft
tons/ft
TENSION CHECKS
Layer
#
1
2
3
---------------
Depth, Za
(ft)
5.39
6.14
6.89
---------------
Tmd
(t/ft)
0.018
0.018
0.019
---------------
334809043.xlsx WORKSHEET_FINAL
Tmax
(t/ft)
0.60
0.42
0.66
---------------
Ttotal
(t/ft)
0.62
0.44
0.67
---------------
Tensile Resistance
Tult (geo.)
t Tal Rc
(t/ft)
0.00
0.00
0.00
---------------
(t/ft)
2.03
2.03
2.03
---------------
Page 52 of 132
CONNECTION CHECKS
Check
t Tal Rc
OK
OK
OK
---------------
Geosynthetic Rupture
TSrs (static)
Check
(t/ft)
---------------------
TSrt (trans.)
(t/ft)
---------------------
Check
TSrt > Tmd
---------------------
10/26/2016 14:39:57
A1
A2
ksf/ft ---->
OK
(sloped fill)
334809043.xlsx WORKSHEET_FINAL
Page 53 of 132
10/26/2016 14:39:57
OK
0.00
0.00
334809043.xlsx WORKSHEET_FINAL
Page 54 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 55 of 132
10/26/2016 14:39:57
A1
A2
0.00
0.00
0.00
0.00
8.49
why Div/0?
334809043.xlsx WORKSHEET_FINAL
Page 56 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 57 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 58 of 132
10/26/2016 14:39:57
t-ft/ft
t-ft/ft
334809043.xlsx WORKSHEET_FINAL
Page 59 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 60 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 61 of 132
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_FINAL
Page 62 of 132
10/26/2016 14:39:57
, q LS_int, q ES_int)
334809043.xlsx WORKSHEET_FINAL
Page 63 of 132
10/26/2016 14:39:57
nsile Resistance
Connection Strength
t Tal Rc
t Tal Rc
Tac
t Tac Rc
t Tac Rc
(STR)
(EXT-II)
(geosynth.)
(STR)
(EXT-II)
(t/ft)
1.52
1.52
1.52
1.52
1.52
1.52
-----------------------------------
(t/ft)
2.03
2.03
2.03
2.03
2.03
2.03
-----------------------------------
(t/ft)
-----------------------------------------------
(t/ft)
-----------------------------------------------
(t/ft)
-----------------------------------------------
334809043.xlsx WORKSHEET_FINAL
CC (STR)
(t/ft)
5.00
5.00
5.00
5.00
5.00
5.00
-----------------------------------
CC (EXT)
(t/ft)
6.00
6.00
6.00
6.00
6.00
6.00
-----------------------------------
Page 64 of 132
Geosynthetic Rupture
Resistance
TSrs (static) TSrt (trans.)
(t/ft)
-----------------------------------------------
(t/ft)
-----------------------------------------------
Tensile Strength
(for Redundancy)
Rc
t Tal Rc
(reduced)
0.045
0.045
0.045
0.045
0.045
0.045
-----------------------------------
(t/ft)
1.02
1.02
1.02
1.02
1.02
1.02
-----------------------------------
10/26/2016 14:39:57
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
Page 65 of 132
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
10/26/2016 14:39:57
Redundancy Force
Vertical stress
(for seismic checks)
Tmax
Tmax
Tmax
Tmax
Tmax
(EXT-II)
(STR)
(STR)
(EXT-II)
(EXT-II)
(STR_red.)
(STR_red.)
(static)
(trans.)
(EXT-I)
(EXT-I)
(tsf)
0.00
0.00
0.00
0.00
0.00
0.00
-------------------------
(tsf)
0.58
0.59
0.62
0.65
0.68
0.71
-------------------------
(t/ft)
1.57
1.46
1.52
1.60
1.67
2.42
-------------------------
(tsf)
0.52
0.54
0.57
0.61
0.64
0.68
-------------------------
(t/ft)
1.42
1.33
1.41
1.50
1.58
2.31
-------------------------
(tsf)
0.47
0.48
0.50
0.53
0.55
0.58
-------------------------
(t/ft)
1.28
1.19
1.24
1.30
1.36
1.97
-------------------------
(t/ft)
-------------------------------------
(t/ft)
-------------------------------------
(tsf)
0.73
0.80
0.90
1.01
1.12
1.25
-------------------------
(tsf)
0.00
0.00
0.00
0.00
0.00
0.00
-------------------------
334809043.xlsx WORKSHEET_FINAL
Page 66 of 132
10/26/2016 14:39:57
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 67 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
-----
-----
-----
-----
-----
Tmax (static)
(t/ft)
-------------------------------------
Check
TSrs
OK
OK
OK
OK
OK
OK
-------------------------
TSrt
Tmax (trans.)
(t/ft)
-------------------------------------
(t/ft)
-------------------------------------
334809043.xlsx WORKSHEET_FINAL
Check
TSrt
OK
OK
OK
OK
OK
OK
-------------------------
-----
-----
-----
-----
-----
-----
F*
(input)
(overlap)
-------------------------------------
(ft)
-------------------------------------
Page 68 of 132
v (stress in
Le req'd for
Tmax
(tsf)
-------------------------------------
(ft)
-------------------------------------
Check
Loverlap
(input)
-------------------------------------
10/26/2016 14:39:57
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 69 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
-----
-----
-----
334809043.xlsx WORKSHEET_FINAL
-----
-----
-----
-----
Page 70 of 132
-----
-----
-----
10/26/2016 14:39:57
) - tan r] / 20 }
Req'd
Le (STR)
Req'd
Le (EXT-II)
(tsf)
0.52
0.67
0.79
0.92
1.06
1.20
-----
(ft)
11.69
9.50
9.42
9.60
9.99
14.71
-----
(ft)
9.83
7.85
7.66
7.71
7.94
11.61
-----
Tmax
v (stress in
(EXT-II)
(t/ft)
1.42
1.33
1.41
1.50
1.58
2.31
-----
334809043.xlsx WORKSHEET_FINAL
Redundancy Check
Check
Le
OK
OK
OK
OK
OK
OK
-----
H_redund.
Tmax_redund.
(tsf)
0.38
0.40
0.43
0.46
0.49
0.53
-----
(t/ft)
1.03
0.99
1.06
1.14
1.21
1.79
-----
Page 71 of 132
Req'd
Le
(ft)
14.28
11.61
11.51
11.73
12.21
17.97
-----
Check
Le
OK
OK
OK
OK
OK
OK
-----
Add'l Le
Needed
Use
Lreinf
(ft)
-----------------
(ft)
21.00
21.00
21.00
21.00
21.00
21.00
-----
10/26/2016 14:39:57
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 72 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
-------------------------
-------------------------
Ttotal
Req'd
Le (EXT-I)
(t/ft)
1.31
1.25
(ft)
11.28
9.18
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
RESISTANCE
Check
Le
OK
OK
334809043.xlsx WORKSHEET_FINAL
Page 73 of 132
10/26/2016 14:39:57
1.34
1.44
1.53
2.24
-----------------------------------------------------
9.09
9.25
9.63
14.08
-----------------------------------------------------
OK
OK
OK
OK
-----------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
Page 74 of 132
10/26/2016 14:39:57
-------------------------------------
-------------------------------------
-------------------------------------
(t/ft)
-------
334809043.xlsx WORKSHEET_FINAL
(input)
Ttotal (pullout)
Loverlap
(ft)
-------
(ft)
-------
(input)
-------
Page 75 of 132
10/26/2016 14:39:57
0.039
0.043
0.046
-------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_FINAL
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 76 of 132
10/26/2016 14:39:57
-----------------------------------
esistance
t Tal Rc
(t/ft)
1.52
1.52
1.52
-----
-----------------------------------
-----------------------------------
-----------------------------------
Connection Strength
Tac (geo.)
t Tac Rc
CC (STR)
(t/ft)
-----------
(t/ft)
-----------
334809043.xlsx WORKSHEET_FINAL
(t/ft)
5.00
5.00
5.00
-----
-----------------------------------
-----------------------------------
Geosynthetic Rupture
Resistance
TSrs (static) TSrt (trans.)
(t/ft)
-----------
(t/ft)
-----------
Page 77 of 132
10/26/2016 14:39:57
-----------
-----------
-----------
-----------
-----------
-----------
Tmax
Ttotal
Le (req'd)
Add'l Le
(t/ft)
(t/ft)
(ft)
Check
Le
Geosynthetic
Rupture Resist.
Check
TSrs
Check
TSrt
---------------------
N/A
N/A
N/A
---------------
SEISMIC
Tmd
(t/ft)
334809043.xlsx WORKSHEET_FINAL
Needed
Use
Lreinf
Page 78 of 132
10/26/2016 14:39:57
0.018
0.018
0.019
---------------
0.60
0.42
0.66
---------------
0.62
0.44
0.67
---------------
334809043.xlsx WORKSHEET_FINAL
7.59
5.20
7.91
---------------
OK
OK
OK
---------------
---------------------
21.00
21.00
21.00
---------------
Page 79 of 132
10/26/2016 14:39:57
CONNECTION CHECKS
Steel
CC (EXT)
> Ttotal ?
OK
OK
OK
---------------
Geosynthetic Connections:
Tult
t Tac Rc
Check
(t/ft)
0.00
0.00
0.00
---------------
(t/ft)
---------------------
t Tac Rc
---------------------
334809043.xlsx WORKSHEET_FINAL
Static
TSrs (conn.)
Check
(t/ft)
---------------------
Dynamic
TSrt (conn.)
Check
T
> Tmd
(t/ft)
Srt
---------------------
Page 80 of 132
---------------------
10/26/2016 14:39:57
By:
Chk'd:
WORKSHEET_CONSTR
Horizontal backfill only for construction live loads
Horiz.
USE
Units
Active earth pressure coefficient (for External Stability)
Geometry:
Notional height of earth pressure diagram
ft
ft
Unfactored Loads:
Date:
Date:
ft
ft
deg
ka
0.333
0.333
h
H2
15.97
15.97
15.97
15.97
H1
15.97
15.97
21.46
B
r
Units
62.00
Horiz.
USE
Moment
arm from
toe (ft) Minimum design earth pressure [D3.11
ka f =
5.32
0.040
t/ft
Pa
2.55
t/ft
V1
20.12
10.96
V3
0.55
0.23
t/ft
t/ft2
q LS
0.18
t/ft
F1_q LS
3.78
3.78
10.96
F2_q LS
0.96
0.96
7.99
t/ft
t/ft2
0.12
10.96
t/ft
F1_q ES
2.52
10.96
t/ft
PV
q ES
Units
2.52
1.18
Horiz.
USE
Am
0.07
PIR
0.54
334809043.xlsx WORKSHEET_CONSTR
t/ft
Page 81 of 132
7.99
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
t/ft
0.5 PAE
t/ft
Wa
3.44
3.44
t/ft
Pi
0.24
0.24
0.20
9.58
Load Factors:
LOAD
FACTOR
DC
EV
EH
ESv
ESh
LS
EQ
SERV I
STR I
STR III
EXTREME I
MIN
MAX
0.90
1.25
1.00
1.35
1.00
1.00
1.00
MIN
0.90
1.00
1.50
MAX
1.25
1.35
1.50
MIN
0.90
1.00
1.50
MAX
1.25
1.35
1.50
1.00
0.75
1.50
0.75
1.50
0.75
1.50
1.00
1.00
1.50
1.75
1.50
1.75
1.50
1.50
1.50
0.00
1.00
1.50
0.00
1.00
334809043.xlsx WORKSHEET_CONSTR
Page 82 of 132
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
FACTORED LOADS:
VERTICAL:
V3
SERV I
MIN
STR I
MAX
MIN
STR III
MAX
EXTREME I
MIN
MAX
(DC)
(EV)
0.55
0.50
0.69
0.50
0.69
0.50
0.69
V1
20.12
20.12
27.16
20.12
27.16
20.12
27.16
F1_q ES
(ES)
2.52
1.89
3.78
1.89
3.78
1.89
3.78
F1_q LS
(LS)
V (bearing) =
3.78
6.62
6.62
0.00
0.00
0.00
0.00
26.97
29.12
38.25
22.51
31.63
22.51
31.63
t/ft
23.19
22.51
31.63
22.51
31.63
22.51
31.63
t/ft
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
HORIZONTAL:
SERV I
STR I
STR III
Pa
(EH)
2.55
3.83
3.83
3.83
3.83
0.00
0.00
F2_q LS
(LS)
0.96
1.68
1.68
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.54
0.54
0.00
3.51
0.00
5.50
0.00
5.50
0.00
3.83
0.00
3.83
0.20
0.74
0.20
0.74
Moment
Arm (ft)
SERV I
MAX
MIN
MAX
EXTREME I
MIN
MAX
PIR
(EQ)
0.5 PAE
H=
t/ft
EXTERNAL STABILITY:
OVERTURNING:
Vertical Load
Moments:
334809043.xlsx WORKSHEET_CONSTR
STR I
MIN
STR III
Page 83 of 132
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
(DC)
(EV)
0.23
0.13
0.11
0.16
0.11
0.16
0.11
0.16
V1
10.96
220.54
220.54
297.73
220.54
297.73
220.54
297.73
F1_q ES
(ES)
10.96
27.62
20.71
41.43
20.71
41.43
20.71
41.43
F1_q LS
(LS)
MV =
10.96
41.43
72.50
72.50
0.00
0.00
0.00
0.00
289.71
313.87
411.82
241.37
339.32
241.37
339.32
Horizontal Load
Moments:
Pa
(EH)
F2_q LS
PIR
0.5 PAE
(LS)
(EQ)
Moment
Arm
SERV I
5.32
MIN
MAX
MIN
MAX
EXTREME I
MIN
MAX
13.58
20.37
20.37
20.37
20.37
0.00
0.00
7.99
7.65
13.39
13.39
0.00
0.00
0.00
0.00
7.99
0.00
0.00
0.00
0.00
0.00
4.28
4.28
9.58
0.00
0.00
0.00
0.00
0.00
1.92
1.92
21.23
33.75
33.75
20.37
20.37
6.20
6.20
MH =
334809043.xlsx WORKSHEET_CONSTR
STR I
STR III
Page 84 of 132
t-ft/ft
t-ft/ft
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
ECCENTRICITY:
1
3
MAX
31.63
STR III
MIN
MAX
22.51
31.63
6
7
EXTREME I
MIN
MAX
22.51
31.63
STR I
SERV I
V=
Xo
(t/ft)
23.19
MIN
22.51
(ft)
11.58
12.45
11.95
9.82
10.08
10.45
10.53
eB
(ft)
-0.85
-1.72
-1.22
0.91
0.65
0.28
0.20
(ft)
PERF. RATIO =
CONTROLLING = 1
Check eB eB max:
5.37
6.34
0
5.37
3.13
0
5.37
4.39
0
5.37
5.89
0
5.37
8.29
0
5.37
19.03
0
5.37
26.87
0
OK
OK
OK
OK
OK
OK
OK
eB max
SLIDING:
For Cohesionless soil or rock
R = V * tan
[D10.6.3.4-1]
R = V * tan + ca B'
[D10.6.3.4-3P]
31.0
0.00
SERV I
STR I
V=
B' =
R =
(t/ft)
(ft)
(t/ft)
23.19
23.15
13.94
MIN
22.51
24.89
13.52
RR =
(t/ft)
13.94
13.52
334809043.xlsx WORKSHEET_CONSTR
deg
tsf
[A11.10.5.3]
[D10.6.3.4-3P, expressed as tons/ft2]
MAX
31.63
23.90
19.01
STR III
MIN
MAX
22.51
31.63
19.64
20.17
13.52
19.01
EXTREME I
MIN
MAX
22.51
31.63
20.90
21.06
13.52
19.01
19.01
13.52
13.52
19.01
Page 85 of 132
19.01
10/26/2016 14:39:57
By:
Chk'd:
WORKSHEET_CONSTR
3.51
3.97
0
5.50
2.46
0
5.50
3.45
0
3.83
3.54
0
3.83
4.97
0
0.74
18.36
0
0.74
25.81
0
OK
OK
OK
OK
OK
OK
OK
334809043.xlsx WORKSHEET_CONSTR
Date:
Date:
Page 86 of 132
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
BEARING:
Bearing Capacity Factors:
Nc =
32.67
[C10.6.3.1.2a-2P or 3P (DM-4)]
(Note: For walls adjacent to slopes, the user input N cq term will be used in p
N =
25.99
[C10.6.3.1.2a-4P (DM-4)]
(Note: For walls adjacent to slopes, the user input N q term will be used in p
Nq =
D=
=
20.63
18.97
0.06
90
L > 5B ?
NO
[C10.6.3.1.2a-1P (DM-4)]
[D10.6.3.1.2gP-6]
weighted average of soil unit weight (tons per cubic foot) [D10.6.3.1.2gP]
ft
tcf
deg
[D10.6.3.1.2a]
V=
Xo =
(t/ft)
26.97
MIN
29.12
MAX
38.25
MIN
22.51
MAX
31.63
EXTREME I
MIN
MAX
22.51
31.63
(ft)
11.49
12.11
11.78
9.82
10.08
10.45
10.53
eB =
(ft)
(ft)
-0.76
22.98
-1.38
24.22
-1.05
23.56
0.91
19.64
0.65
20.17
0.28
20.90
0.20
21.06
SERV I
B' =
sc =
STR I
STR III
1.34
1.35
1.34
1.29
1.30
1.31
1.31
s =
0.79
0.78
0.78
0.82
0.81
0.81
0.80
sq =
1.32
1.34
1.33
1.27
1.28
1.29
1.29
ic =
i =
iq =
n=
qn (soil) =
0.78
0.69
0.69
0.58
0.76
0.66
0.72
0.61
0.80
0.71
0.94
0.91
0.96
0.94
0.79
1.65
0.71
1.64
0.77
1.65
0.73
1.69
0.81
1.68
0.95
1.67
0.96
1.67
21.63
22.60
22.09
19.03
19.44
20.01
20.14
(tsf)
334809043.xlsx WORKSHEET_CONSTR
Page 87 of 132
10/26/2016 14:39:57
By:
Chk'd:
WORKSHEET_CONSTR
qult (soil) =
(tsf)
13.64
11.95
13.34
11.05
12.88
16.56
17.03
qn (rock) =
(tsf)
---
---
---
---
---
---
---
qn =
(tsf)
13.64
11.95
13.34
11.05
12.88
16.56
17.03
(tsf)
q=
(tsf)
PERF. RATIO =
CONTROLLING = 1
Check qR q:
6.14
1.17
5.23
0
5.38
1.20
4.47
0
6.00
1.62
3.70
0
4.97
1.15
4.34
0
5.80
1.57
3.69
0
16.56
1.08
15.37
0
17.03
1.50
11.34
0
OK
OK
OK
OK
OK
OK
OK
qR =
334809043.xlsx WORKSHEET_CONSTR
Date:
Date:
Page 88 of 132
10/26/2016 14:39:57
By:
Chk'd:
WORKSHEET_CONSTR
0.283
0.00
[D3.11.5.8.1-4]
[A11.10.6.2.1-2]
Z2 for distribution of PV surcharge for internal stability [A3.11.6.3-1]
ft
2.06
ft
0.58
0.16
0.47
3.40
16.00
84.00
39.48
mil./yr. =
mil./yr. =
mil./yr. =
mils
yrs
yrs
mils =
Layer
#
1
2
3
4
5
6
---
Depth, Z
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
---
Date:
Date:
Tr
Ec
(in.)
0.16
0.16
0.16
0.16
0.16
0.16
---
(in.)
0.08
0.08
0.08
0.08
0.08
0.08
---
334809043.xlsx WORKSHEET_CONSTR
[A11.10.6.4.2a]
0.00058 in./yr.
0.00016 in./yr.
0.00047 in./yr.
0.03948 in.
[A11.10.6.4.3b]
D*
(in.)
-0.08
-0.08
-0.08
-0.08
-0.08
-0.08
---
Ac (steel)
Ac (geo.)
Ac
Rc
Tal (steel)
(in.2)
0.17
0.17
0.17
0.17
0.17
0.17
---
(in.2)
0.33
0.33
0.33
0.33
0.33
0.33
---
(in.2)
0.17
0.17
0.17
0.17
0.17
0.17
---
ratio
0.067
0.067
0.067
0.067
0.067
0.067
---
(t/ft)
30.25
30.25
30.25
30.25
30.25
30.25
---
Page 89 of 132
Tensile Resistance
Tult (geo.)
Tal (geo.)
(t/ft)
---------------
(t/ft)
---------------
10/26/2016 14:39:57
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 90 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
---------------------------
---------------------------
---------------------------
REINFORCEMENT STRENGTH:
P =
1.35
Date:
Date:
WORKSHEET_CONSTR
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
[A11.10.6.2.1-1]
Tensile Force for
Geosynthetic Rupture
Sv
(ft)
2.73
2.46
2.46
2.46
2.46
334809043.xlsx WORKSHEET_CONSTR
---------------------------
STR-I, STR-III
Layer
#
1
2
3
4
5
---------------------------
D1 (Pv)
(ft)
5.75
7.26
8.49
9.72
10.95
kr / ka
coeff.
1.66
1.60
1.54
1.48
1.42
kr
(strength)
0.47
0.45
0.44
0.42
0.40
v
(tsf)
0.21
0.16
0.14
0.12
0.11
Page 91 of 132
v
(tsf)
0.60
0.70
0.82
0.95
1.09
H
(tsf)
0.38
0.43
0.48
0.54
0.59
Tmax
(t/ft)
1.03
1.05
1.19
1.32
1.45
Tmax
Tmax
(static)
(trans.)
(t/ft)
-----------
(t/ft)
-----------
10/26/2016 14:39:57
By:
Chk'd:
13.80
-----------------------------------------------------------
3.40
-----------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
12.18
-----------------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
1.36
-----------------------------------------------------------
0.38
-----------------------------------------------------------
0.10
-----------------------------------------------------------
Page 92 of 132
1.23
-----------------------------------------------------------
0.63
-----------------------------------------------------------
2.15
-----------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
-------------------------------
-------------------------------
-------------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------------
-------------------------------
-------------------------------
-------------------------------
-------------------------------
-------------------------------
-------------------------------
-------------------------------
STRENGTH CHECKS:
Layer
Depth, Z
#
1
2
3
4
5
6
---
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
---
Tensile Resistance
Tmax
Check
t Tal Rc
(t/ft)
(t/ft)
1.52
1.03
OK
1.52
1.05
OK
1.52
1.19
OK
1.52
1.32
OK
1.52
1.45
OK
1.52
2.15
NG!
-------
t Tal Rc
334809043.xlsx WORKSHEET_CONSTR
Connection Strength
t Tac Rc [or CC (STR)]
t Tac Rc
Tmax
(t/ft)
5.00
5.00
5.00
5.00
5.00
5.00
---
(t/ft)
1.03
1.05
1.19
1.32
1.45
2.15
---
Page 93 of 132
Geosynthetic Rupture
TSrs
Check
OK
OK
OK
OK
OK
OK
---
(t/ft)
---------------
Static Component
Tmax (static)
Check
(t/ft)
---------------
TSrs
OK
OK
OK
OK
OK
OK
---
Dynamic Compone
TSrt
(t/ft)
---------------
10/26/2016 14:39:57
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 94 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
---------------------------
---------------------------
334809043.xlsx WORKSHEET_CONSTR
---------------------------
Date:
Date:
WORKSHEET_CONSTR
---------------------------
---------------------------
---------------------------
Page 95 of 132
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
10/26/2016 14:39:57
By:
Chk'd:
Date:
Date:
WORKSHEET_CONSTR
REINFORCEMENT PULLOUT:
Pullout Friction Factor, F*:
[Figure A11.10.6.3.2-1]
Type:
Geotextiles / geogrids
For Z or Zp 20 ft:
0.67 tan r =
0.45
For Z or Zp < 20 ft :
0.67 tanr =
0.45
tan r =
MIN (1.2 + log Cu, 2.0) - Zp { [MIN (1.2 + log Cu, 2.0) - tan r] / 20
0.40 =
10 (t / St) =
Steel grids
Scale Effect Correction Factor, :
Steel Reinforcements
Geogrids
Geotextiles
=
0.67
0.40
0.40 =
0.40
20 (t / St) - 10 (t / St) (Zp / 20)
0.00
[Table A11.10.6.3.2-1]
1.0
0.8
0.6
1.0
La
Le
Layer
Depth, Z
Zp
Z+S
(active zone)
(eff. length)
F*
kr
v (no LS)
Tmax
#
1
2
3
4
5
6
-----
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
(ft)
1.50
3.96
6.42
8.88
11.34
13.80
-----
(ft)
4.79
4.79
4.79
4.25
2.78
1.30
-----
(ft)
16.21
16.21
16.21
16.75
18.22
19.70
-----
factor
1.72
1.58
1.44
1.30
1.16
1.02
-----
(pullout)
(tsf)
0.42
0.52
0.64
0.77
0.91
1.05
-----
(tsf)
0.26
0.32
0.38
0.44
0.49
0.54
-----
(t/ft)
0.72
0.78
0.93
1.07
1.21
1.84
-----
334809043.xlsx WORKSHEET_CONSTR
Page 96 of 132
0.470
0.453
0.435
0.418
0.400
0.383
-----
v (stress in
resist.zone)
(tsf)
0.23
0.38
0.54
0.69
0.85
1.00
-----
10/26/2016 14:39:57
By:
Chk'd:
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Page 97 of 132
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
-------------------------
-------------------------
-------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
EXT-I
Am =
0.07
Wa =
3.44
EQ =
1.00
Pi =
0.24
tons/ft
Le =
103.3
ft
tons/ft
TENSILE STRENGTH
PULLOUT RESISTANCE
Geosynthetic Rupture
Layer
Depth, Z
Tmd
H (strength)
Tmax
Ttotal
t Tal Rc
#
1
2
(ft)
1.50
3.96
(t/ft)
0.038
0.038
(tsf)
0.26
0.32
(t/ft)
0.72
0.78
(t/ft)
0.76
0.82
(t/ft)
2.03
2.03
334809043.xlsx WORKSHEET_CONSTR
Page 98 of 132
Check
t Tal Rc
OK
OK
Static
TSrs > Tmax
Dynamic
TSrt > Tmd
-----
-----
v (no LS)
H (pullout)
(tsf)
0.42
0.52
(tsf)
0.26
0.32
10/26/2016 14:39:57
By:
Chk'd:
6.42
8.88
11.34
13.80
-----------------------------------------------------
0.038
0.039
0.043
0.046
-----------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
0.38
0.44
0.49
0.54
-----------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
0.93
1.07
1.21
1.84
-----------------------------------------------------
0.97
1.11
1.25
1.88
-----------------------------------------------------
2.03
2.03
2.03
2.03
-----------------------------------------------------
Page 99 of 132
OK
OK
OK
OK
-----------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
0.64
0.77
0.91
1.05
-----------------------------------------------------
0.38
0.44
0.49
0.54
-----------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
-------------------------------------
-------------------------------------
-------------------------------------
Date:
Date:
WORKSHEET_CONSTR
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
-------------------------------------
Geosynthetic Reinforcements:
Layer
Depth, Z
Ttotal
CC (EXT)
Check
#
1
2
3
(ft)
1.50
3.96
6.42
(t/ft)
0.76
0.82
0.97
(t/ft)
6.00
6.00
6.00
CC (EXT)
OK
OK
OK
334809043.xlsx WORKSHEET_CONSTR
Long-Term Strength
Ttotal
Tult
(t/ft)
0.76
0.82
0.97
(t/ft)
-------
t Tac Rc
(t/ft)
-------
Static Component
Tmax
TSrs (static)
(t/ft)
0.72
0.78
0.93
(t/ft)
-------
Check
TSrs
-------
10/26/2016 14:39:57
By:
Chk'd:
8.88
11.34
13.80
-------------------------------------------------------
1.11
1.25
1.88
-------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
6.00
6.00
6.00
-------------------------------------------------------
Date:
Date:
WORKSHEET_CONSTR
OK
OK
OK
-------------------------------------------------------
1.11
1.25
1.88
-------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
1.07
1.21
1.84
-------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
By:
Chk'd:
-----------------------------------
-----------------------------------
334809043.xlsx WORKSHEET_CONSTR
-----------------------------------
Date:
Date:
WORKSHEET_CONSTR
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
10/26/2016 14:39:57
0.035
ksf/ft ---->
OK
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
esistance
t Tal Rc
(t/ft)
1.52
1.52
1.52
1.52
1.52
1.52
---
Connection Strength
Tac (geo.)
t Tac Rc
CC (STR)
(t/ft)
---------------
(t/ft)
---------------
(t/ft)
5.00
5.00
5.00
5.00
5.00
5.00
---
334809043.xlsx WORKSHEET_CONSTR
Geosynthetic Rupture
Resistance
TSrs (static) TSrt (trans.)
(t/ft)
---------------
(t/ft)
---------------
10/26/2016 14:39:57
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:57
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
(tsf)
0.42
0.52
0.64
0.77
0.91
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
1.05
-----------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
-------------------------------
tic Rupture
Dynamic Component
Tmax (trans.)
Check
(t/ft)
---------------
TSrt
OK
OK
OK
OK
OK
OK
---
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
---------------------------
---------------------------
334809043.xlsx WORKSHEET_CONSTR
10/26/2016 14:39:57
0) - tan r] / 20 }
Add'l Le
Check
Le
OK
OK
OK
OK
OK
OK
-----
Needed
Use
Lreinf
(ft)
-----------------
(ft)
21.00
21.00
21.00
21.00
21.00
21.00
-----
334809043.xlsx WORKSHEET_CONSTR
(input)
Tmax (STR)
(overlap)
-----------------
(ft)
-----------------
(ft)
-----------------
10/26/2016 14:39:58
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:58
-------------------------
-------------------------
-------------------------
-------------------------
v (stress in
resist.zone)
Req'd
Le (EXT-I)
(tsf)
0.23
0.38
(ft)
15.14
10.53
-------------------------
-------------------------
-------------------------
RESISTANCE
Tmax
Ttotal
(t/ft)
0.72
0.78
(t/ft)
0.76
0.82
334809043.xlsx WORKSHEET_CONSTR
Check
Le
OK
OK
10/26/2016 14:39:58
0.93
1.07
1.21
1.84
-----------------------------------------------------
0.97
1.11
1.25
1.88
-----------------------------------------------------
0.54
0.69
0.85
1.00
-----------------------------------------------------
9.71
9.58
9.82
14.23
-----------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
OK
OK
OK
OK
-----------------------------------------------------
10/26/2016 14:39:58
-------------------------------------
-------------------------------------
-------------------------------------
(t/ft)
-------
-------------------------------------
-------------------------------------
(input)
Ttotal (pullout)
Loverlap
(ft)
-------
(ft)
-------
(input)
334809043.xlsx WORKSHEET_CONSTR
-------
10/26/2016 14:39:58
0.039
0.043
0.046
-------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
334809043.xlsx WORKSHEET_CONSTR
-------------------------------------------------------------
-------------------------------------------------------------
10/26/2016 14:39:58
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
334809043.xlsx WORKSHEET_CONSTR
-----------------------------------
-----------------------------------
10/26/2016 14:39:58
By:
Chk'd:
Date:
Date:
OUTPUT
External Stability
Type of Stability Check:
Overturning (Eccentricity):
Sliding:
Bearing:
eB =
3.55
ft
eB max =
H=
RR =
5.37
11.60
ft
t/ft
15.96
1.91
t/ft
t/ft2
2.31
t/ft2
q=
qR =
Load Case
Perf. Ratio
STR-I MIN
1.51
STR-I MIN
1.38
STR-I MIN
1.21
Location
Tmax =
1.97
t/ft
t Tal Rc =
1.02
t/ft
Tmax =
CC (STR or EXT) =
Le req'd =
2.42
5.00
t/ft
t/ft
15.35
ft
Le =
16.21
ft
Ttotal =
2.24
t/ft
t Tal Rc =
2.03
t/ft
Ttotal =
CC (EXT) =
Le req'd =
2.24
6.00
t/ft
t/ft
15.14
ft
Le =
16.21
ft
Perf. Ratio
LAYER # 6
0.52
LAYER # 6
2.07
LAYER # 1
1.06
LAYER # 6
0.91
LAYER # 6
2.68
LAYER # 1
1.07
Tmax =
---
t/ft
t Tal Rc =
---
t/ft
Tmax (static) =
---
t/ft
SrsRc/RF =
---
t/ft
Tmax (transient) =
---
t/ft
---
t/ft
SrtRc/(RFID*RFD) =
Connection Strength:
Wall Facing (Overlap):
334809043.xlsx OUTPUT
Tmax =
---
t/ft
t Tac Rc =
---
t/ft
Loverlap req'd =
---
ft
Loverlap =
---
ft
Location
Perf. Ratio
---
---
---
---
---
---
---
---
---
---
10/26/2016 14:39:58
By:
Chk'd:
Date:
Date:
OUTPUT
# of Input Warnings/Errors = 1
Le req'd =
--ft
Le =
--ft
Tensile Resistance:
Ttotal =
---
t/ft
t Tal Rc =
---
t/ft
Tmax =
---
t/ft
SrsRc/RF =
---
t/ft
Tmd =
---
t/ft
---
t/ft
Ttotal =
---
t/ft
t Tac Rc =
---
t/ft
Tmax =
---
t/ft
SrsCRcrRc/RFD =
---
t/ft
Tmd =
---
t/ft
SrtCRuRc/RFD =
---
t/ft
Loverlap req'd =
---
ft
Loverlap =
---
ft
Le req'd =
---
ft
Le =
---
ft
(Seismic)
Tensile Resistance (Static):
(Seismic)
Tensile Resistance (Dynamic):
(Seismic)
Connection Strength:
(Seismic)
Connection Strength (Static):
(Seismic)
Connection Strength (Dynamic):
(Seismic)
Wall Facing (Overlap):
(Seismic)
Pullout Resistance:
(Seismic)
334809043.xlsx OUTPUT
SrtRc/(RFID*RFD) =
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
10/26/2016 14:39:58
By:
Chk'd:
Date:
Date:
OUTPUT
Tmax =
0.77
t/ft
t Tal Rc =
1.52
t/ft
Tmax =
0.77
5.00
t/ft
t/ft
CC (STR) =
Le req'd =
7.86
ft
Le =
13.87
ft
Ttotal =
0.67
t/ft
t Tal Rc =
2.03
t/ft
Ttotal =
CC (EXT) =
Le req'd =
0.67
6.00
t/ft
t/ft
7.59
ft
Le =
13.87
ft
Location
Perf. Ratio
LAYER # 3
1.97
LAYER # 3
6.47
LAYER # 1
1.76
LAYER # 3
3.02
LAYER # 3
8.90
LAYER # 1
1.83
Tmax = Err:509
t Tal Rc = Err:509
Pullout Resistance:
Tensile Resistance:
(Seismic)
Tensile Resistance (Static):
(Seismic)
Tensile Resistance (Dynamic):
(Seismic)
Connection Strength:
(Seismic)
334809043.xlsx OUTPUT
t/ft
Tmax (static) =
---
t/ft
SrsRc/RF =
---
t/ft
Tmax (transient) =
---
t/ft
---
t/ft
Tmax =
---
t/ft
t Tac Rc =
---
t/ft
Le req'd =
---
ft
Le =
---
ft
Ttotal =
---
t/ft
t Tal Rc =
---
t/ft
Tmax =
---
t/ft
SrsRc/RF =
---
t/ft
Tmd =
---
t/ft
---
t/ft
Ttotal =
---
t/ft
t Tac Rc =
---
t/ft
SrtRc/(RFID*RFD) =
Connection Strength:
t/ft
SrtRc/(RFID*RFD) =
Location
Perf. Ratio
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
10/26/2016 14:39:58
By:
Chk'd:
Date:
Date:
OUTPUT
334809043.xlsx OUTPUT
# of Input Warnings/Errors = 1
Tmax =
--t/ft
SrsCRcrRc/RFD =
--t/ft
Tmd =
---
t/ft
SrtCRuRc/RFD =
---
t/ft
Le req'd =
---
ft
Le =
---
ft
---
---
---
---
---
---
10/26/2016 14:39:58
OUTPUT
OK ?
OK
OK
OK
OK ?
NG!
OK
OK
NG!
OK
OK
nt
OK ?
-----------
334809043.xlsx OUTPUT
10/26/2016 14:39:58
OUTPUT
-------------------
334809043.xlsx OUTPUT
10/26/2016 14:39:58
OUTPUT
ment)
OK ?
OK
OK
OK
OK
OK
OK
cement)
OK ?
-------------------
334809043.xlsx OUTPUT
10/26/2016 14:39:58
OUTPUT
-------
334809043.xlsx OUTPUT
10/26/2016 14:39:58