Documente Academic
Documente Profesional
Documente Cultură
MODELS
520CJ75
520CK75
520CL75
FEATURES
Custom designed for Refrigerant Recovery applications
All wetted aluminum parts treated for corrosion protection from moisture
Lightweight die cast aluminum components
Oil-less, non-lubricated piston and cylinder
Permanently lubricated ball bearings
Balanced for smooth, low vibration and quiet operation
UL approval on 115V 60Hz model
TUV/UL approval on 220-240V 50Hz model
Compatible with Refrigerants R-11, R-12, R-22, R-113, R-114, R-123, R-134A, R404A,
R-410A, R-500 and R-502
Minimum Compression Ratio = 50:1 (11" Hg @ 435 psig and 29.5" Hg barometer)
Liquid Recovery Rate: 5-15 lbs/min*
Vapor Recovery Rate: .5-1.0 lb/min*
Liquid compatible Head/Valve system
520CJ75
520CK75
520CL75
HEAD CONFIGURATION
Pressure/Vacuum
Pressure/Vacuum
STROKE
.750 Inches
.750 Inches
.750 Inches
PRESSURE
MODEL NUMBER
CFM @ PSI
Pressure/Vacuum
LPM @ bar
CFM
LPM
CFM
LPM
CFM
LPM
PSI
bar
0
50
100
150
200
250
300
350
400
435
.36 / .50
10.2 / 14.2
.50
14.2
.36
0
.31 / .39
8.8 / 11.0
.39
11.0
.31
4
.28 / .33
7.4 / 9.1
.33
9.1
.28
8
.27 / .32
7.4 / 9.1
.32
9.1
.27
12
.26 / .32
7.4 / 9.1
.32
9.1
.26
16
.26 / .32
7.4 / 9.1
.32
9.1
.26
20
.26 / .32
6.8 / 8.8
.32
8.8
.26
24
.24 / .30
6.8 / 8.2
.30
8.2
.24
28
.24 / .29
.29
.24
.23 / .27
.26
.23
See Note 5
VACUUM
CFM @ IN. hg
10.2
8.8
7.4
7.4
7.4
7.4
6.8
6.8
See Note 5
See Note 5
See Note 5
See Note 5
See Note 5
30 bar
435 PSI
30 bar
435 PSI
30 bar
435 PSI
IN. hg
mbar (gauge)
0
5
10
15
20
0
-100
-200
-400
-600
CFM
.36
.26
.19
.13
.05
/
/
/
/
/
.50
.29
.20
.13
.05
LPM
CFM
LPM
CFM
LPM
10.2 / 14.2
8.8 / 11.8
7.0 / 7.3
4.7 / 4.7
2.5 / 2.5
.50
.29
.20
.13
.05
14.2
11.8
6.9
4.1
.36
.26
.19
.13
.05
10.2
8.8
7.0
4.7
2.5
MAX. VACUUM
23 hg
-779 mbar
23" hg
-779 mbar
23" hg
-779 mbar
122 F
50C
122 F
50C
122 F
50C
32 F
0C
32 F
0C
32 F
0C
90 PSI
6.2 bar
90 PSI
6.2 bar
90 PSI
6.2 bar
23 hg
-779 mbar
23" hg
-779 mbar
23" hg
-779 mbar
MOTOR VOLTAGE/FREQUENCY
100/50/60/1
115/60/1
220-240/50/1
MOTOR TYPE
Capacitor Start
Capacitor Start
Capacitor Start
6.8 / 5.1
6.5
3.1
335 / 315
410
355
STARTING CURRENT
(LOCKED ROTOR, AMPS)
34.0 / 38.0
38.0
24.0
CAPACITOR VALUE
2910 / 3500
3500
2940
160 5C
160 5C
120 5C
18.5 lbs.
NET WEIGHT
8.4 kg
F
17 lbs.
7.7 kg
B
18.5 lbs.
8.4 kg
Note 1: Restart stated in terms of differential pressure between crankcase and inlet port.
Note 2: The model 520 requires a start capacitor and a switching mechanism (mechanical or electronic).
Note 3: Pressure flow stated assumes atmospheric inlet pressure. Vacuum flows stated assume atmospheric discharge pressure.
Note 4: T
he model 520 requires additional cooling air flow to maintain adequate motor winding temperatures (Class B) and head temperatures. Requirements vary with
system design. Consult factory for details.
Note 5: Vapor
pressure will vary due to the refrigerant used and temperature. Regardless of these varying conditions, suction pressure (inlet port) must be limited so as to
not exceed thermal protection device minimum open temperatures as listed above or the motor will shut off power. Therefore, a margin is recommended to avoid
nuisance trips.
520 SERIES
Dimensions
520CL75, 520CJ75
7.83
(198.9)
520CK75
7.58
(192.5)
The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate
and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user to determine
the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
Thomas Industries does not warrant, guarantee or assume any obligation or liability in connection with this information.
NOTE: Models pictured are representative of the series and do not represent a specific model number. Consult factory for detailed
physical description.
Thomas Division
1419 Illinois Ave
Sheboygan, WI 53081 USA
Phone: (920) 457-4891
Fax: (920) 451-4276
www.gd-thomas.com