Documente Academic
Documente Profesional
Documente Cultură
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CR 15-3 A-F-A-E-HQQE
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and air vent screw.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with tapped-hole flange (FT).
Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The
protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any
duty point. Grundfos CUE offers a range of variable speed drives. Please find more information in
Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
253 .. 393 K
293 K
998.2 kg/m
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
2902 rpm
17 m/h
33.2 m
HQQE
CE,TR
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp:
16 bar / 120 C
16 bar / -20 C
Flange standard:
DIN
Pipe connection:
DN 50
Pressure stage:
PN 16
Flange size for motor:
FT130
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
100LC
IE3
2
3 kW
3 kW
3 kW
50 Hz
3 x 380-415 D V
6.3 A
840-920 %
0,87-0,82
2900-2920 rpm
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
IE3 87,1%
87,1-87,1 %
88,0-87,0 %
87,7-85,4 %
55 (Protect. water jets/dust)
F
Others:
Label:
Grundfos Blueflux
Minimum efficiency index, MEI : 0.7
Net weight:
57 kg
Gross weight:
79 kg
Shipping volume:
0.1 m3
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96501894 CR 15-3 50 Hz
H
[m]
eta
[%]
45
40
35
30
25
100
20
80
15
60
10
40
20
0
0
10
12
14
16
18
20
22
Q [m/h]
P
[kW]
NPSH
[m]
3.0
12
P1
2.5
10
P2
2.0
1.5
1.0
0.5
0.0
5/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Product name:
Product No:
EAN number:
Value
CR 15-3 A-F-A-E-HQQE
96501894
5700396231341
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
H
[m]
45
40
eta
[%]
35
60
10
40
20
0
0
10
15
20
NPSH
[m]
P1
P2
2
1
Water
253 .. 393 K
293 K
998.2 kg/m
0
120
198
G 1/2
G 1/2
18.1
G 1/2
130
4 x 13.5
65
176
215
300
256
165
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
125
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
333 K
16 bar / 120 C
16 bar / -20 C
DIN
F
DN 50
PN 16
FT130
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
L2
L1
+T
TO AMPLIFIER
RELAY
+T
TO AMPLIFIER
RELAY
100LC
IE3
2
3 kW
3 kW
3 kW
50 Hz
3 x 380-415 D V
6.3 A
840-920 %
0,87-0,82
2900-2920 rpm
IE3 87,1%
87,1-87,1 %
88,0-87,0 %
87,7-85,4 %
55 (Protect. water jets/dust)
F
PTC
+T
L1
+T
L2
L3
+T
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
4
2
20
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
Q [m/h]
P
[kW]
L3
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
80
15
+T
Material code:
Code for rubber:
100
20
335
Impeller:
25
465
Materials:
Pump housing:
30
2902 rpm
17 m/h
33.2 m
42.7 m
03
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 15
03
A
A
90
Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Motor No:
85U15510
Others:
Label:
Minimum efficiency index, MEI :
Net weight:
Gross weight:
Shipping volume:
Grundfos Blueflux
0.7
57 kg
79 kg
0.1 m3
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
165
125
215
256
300
18.1
176
65
4 x 13.5
96501894 CR 15-3 50 Hz
G 1/2
G 1/2
120
130
198
G 1/2
20
90
465
335
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
8/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96501894 CR 15-3 50 Hz
+T
+T
TO AMPLIFIER
RELAY
L1
+T
L2
+T
L3
+T
TO AMPLIFIER
+T
RELAY
L1
L2
L3
9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89