Documente Academic
Documente Profesional
Documente Cultură
2.4
2.75
5.5
10
15
25
30
50
65
100
150
200
200
16.3
0.5
0.75
1.25
2
2.75
4
5.5
7
15
20
25
40
19.9
0.33
0.75
1
1.5
2.5
3.5
4
7
10
15
20
30
22.9
0.33
0.5
0.75
1.5
2.5
2.75
4
5.5
10
15
20
30
2.4
4
10
15
25
40
50
80
100
150
200
-
4.16
2.75
5.5
10
15
25
30
50
65
100
150
200
200
13.8
0.75
1.5
2.5
4
5.5
7
15
15
30
40
65
80
22.9
0.5
1
1.5
2.5
4
5.5
7
10
20
25
40
50
* Open Delta banks use kVA rating of largest transformer connected to lead under consideration.
Type D Fuse Links are available in ratings of 1 through 20 A. Fuse link ratings recommended in these tables will carry the full load of the transformer continuously and
will open within five minutes when the transformer load is approximately three
times the full load current. Smaller or larger fuse link ratings may be used to give
the desired correlation of protection and continuity of service. These tables are
meant to be used as a guide until a more detailed study can be made by the user.
Single-Phase Table
The Single-Phase Table is used for all single-phase, three-phase WYE, and
outside legs of open delta connected transformers. Do not fuse the neutral on
WYE and open Delta connected transformers.
Three-Phase Table
The Three-Phase Table is used for closed delta and common legs of open Delta
connected transformers. Use the fuse size recommended for the largest transformer
connected to the lead under consideration. Refer to the single-phase table for
WYE and open Delta connected transformers.
2.4
4
7
10
15
20
-
4.8
1.5
4
5
7
10
15
20
-
2.4
5
10
15
-
4.8
3
5
7
15
20
-
Fuse link ratings recommended in these tables will carry the full load of the
transformer continuously and will open in five minutes when the transformer load is
approximately three times full load. Smaller or larger fuse link ratings may be used
to give the desired correlation of protection and continuity of service, These tables
are to be used as a guide until a more detailed study can be made by the user.
Single-Phase Table
The single-phase table is used for all single-phase, three-phase WYE and outside
legs of open delta connected transformers. Do not fuse the neutral.
Three-Phase Table
The three-phase table is used for closed Delta and common legs of open Delta
connected transformers. Use the fuse size recommended for the largest
transformer connected to lead under consideration. Refer to the single-phase table
for WYE and open Delta connected transformers.
2.4
2
3
6
6
8
15
25
30
50
65
100
100
140
140
140
200
4.16
1
2
3
3
6
8
12
15
25
30
50
65
65
80
100
140
4.8
1
2
2
3
6
8
10
15
25
30
50
50
65
80
100
140
14.4
1
1
1
1
2
3
3
6
8
10
15
15
20
25
30
50
22.9
1
1
1
1
1
2
3
3
6
6
10
10
12
15
20
30
2.4
3
6
8
10
15
25
40
50
80
100
140
140
200
200
200
-
4.16
2
3
6
6
8
15
25
30
50
65
100
100
100
140
140
200
4.8
2
3
3
6
8
12
20
25
40
50
80
80
100
100
140
200
2.4
2
3
5
7
10
15
25
30
50
65
100
100
125
150
175
200
4.16
1
2
3
3
5
7
15
15
25
30
50
65
65
80
125
175
4.8
1
2
2
3
5
7
10
15
25
30
50
50
65
80
100
150
14.4
1
1
1
1
2
3
5
5
7
10
15
15
20
25
30
50
22.9
1
1
1
1
1
2
3
3
5
7
10
10
15
15
20
30
2.4
3
5
7
10
15
25
40
50
80
100
150
175
200
200
-
4.16
2
3
5
7
10
15
25
30
50
65
100
100
125
150
175
200
4.8
2
3
5
5
7
15
20
25
40
50
80
80
100
125
175
200
2.4
3
10
5
25
40
50
75
100
150
200
-
2.4
7
15
25
40
60
75
125
150
-
4.16
3
10
15
25
40
50
75
100
150
200
-
22.9
1
1
2
3
7
7
10
20
30
40
60
75
34.4
1
1
1
2
3
5
7
10
20
30
40
60