Documente Academic
Documente Profesional
Documente Cultură
Description
E010
Paper not reaching fuser transport sensor: Paper which has passed the
fuser unit does not reach the fuser transport sensor
E020
E030
E061
E062
E063
E064
E065
E090
E091
E0A0
E110
E120
E130
E140
E150
E160
E180
E190
E200
E201
E210
Paper stopping at fuser transport sensor: The trailing edge of paper does not
pass the fuser transport sensor after its leading edge has reached the fuser
transport sensor
Power-ON jam: Paper is remaining on the paper transport path of the equipment
when the power is turned ON
Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer
differs from size setting of the equipment
Incorrect paper size setting for 2nd drawer: The size of paper in the 2nd drawer
differs from size setting of the equipment
Incorrect paper size setting for 3rd drawer: The size of paper in the 3rd drawer
differs from size setting of the equipment
Incorrect paper size setting for 4th drawer: The size of paper in the 4th drawer
differs from size setting of the equipment
Incorrect paper size setting for bypass tray: The size of paper in the bypass tray
differs from size setting of the equipment
Image data delay jam: Image data to be printed cannot be prepared
Other time-out jam: The equipment does not operate normally because
abnormality occurred on an interface between the SYS board and engine
firmware
E220
E230
E240
E250
E260
E261
E2A1
E300
E301
E310
E320
E330
E331
E340
E350
E360
4th drawer transport jam (paper not reaching 3rd drawer / Tandem
LCF transport sensor): Paper which has passed the 4th drawer
transport sensor does not reach the 3rd drawer / Tandem LCF
transport sensor during the feeding at the 4th drawer
E370
E380
E3C0
E3C1
E3D0
E3E0
E3F0
E410
E440
E450
E460
E470
E510
E511
E512
E540
E550
3rd drawer transport jam (paper not reaching 3rd drawer / Tandem LCF transport
sensor): Paper which has passed the 3rd drawer / Tandem LCF feed sensor does
not reach the 3rd drawer / Tandem LCF transport sensor during the feeding at the
3rd drawer
4th drawer transport jam (paper not reaching 4th drawer transport sensor): Paper
which passed the 4th drawer feed sensor does not reach the 4th drawer transport
sensor during the feeding at the 4th drawer
E551
E552
E570
E580
E590
E5a0
E712
E714
E721
estudio_555