Submit to Prof. Lynchs Mailbox in 2340 GG Brown Multiple Degree of Freedom Systems Spectral Analysis
A lumped mass undamped structural system is shown below:
p1(t) m2 p2(t) 10 k k2 t (seconds) 0.1
m1 p1(t)
p2(t) 20 k
k1
t (seconds) 0.1
For the system:
(a) Perform a response history analysis using modal superposition method to: i. determine the displacement response of the structure due to the impulsive loads shown in the figure ii. plot the displacement time history for each floor iii. determine the maximum displacement on each floor iv. determine the maximum floor shear forces (b) Use the impulse response spectrum to: i. compute the absolute maximum displacement per each floor ii. estimate the displacement response per each floor using the SRSS method iii. estimate the floor shear forces using the SRSS method (c) Comment on the solutions obtained in Parts (a) and (b)
Assume the structural system is initially at rest
Structural Properties: o m1 = 136 lb-sec2/in o m2 = 66 lb-sec2/in o k1 = 30,700 lb/in o k2 = 44,300 lb/in Figures from Biggs, Introduction to Structural Dynamics, show the maximum response of SDOF (undamped) system subjected to rectangular and triangular load pulses having zero rising time.