Documente Academic
Documente Profesional
Documente Cultură
SDN BHD
1.0
METHOD OF
STATEMENT
PURPOSE
This procedure is to define and establish the method statement of Hydroseeding Mix
Application
2.0
SCOPE
To provide clear instruction of Hydroseeding Mix Application
3.0
REFERENCES
Construction Drawing
4.0
DEFINITION
To determine the application of Hydroseeding Mix
5.0
RESPONSIBILITIES
5.1
Project Manager
5.2
6.0
Monitor implementation of this method statement and ensure the works are
carried out.
Co-ordination of testing with consultant (if required)
MATERIALS
Water
Mulch
Soil Tacktifier
Grass Seeds
Page 1 of 3
AKTIF UNGGUL
SDN BHD
METHOD OF
STATEMENT
Fertilizer
8.0
Excavator
Hand Scoop
SAFETY CONDITIONS
Refer to Safety Booklets.
METHODOLOGY
HYDROSEEDING MIX
a) Pump water into hydroseeder to level.
b) Free gear and start engine.
c) Put in mulch (if paper mulch is used 15 to 20 kg dry weight is recommended)
d) Next add in 30 kg Soil Tackifier (R1187)
e) Put in 8 to 10 kg grass seeds. You may add millet if you wish for fast establishment
of greens/ vegitation.
f) Add one bag (40-50 kg) of Bio-Super 1 fertilizer with the mixture.
g) Finally top up with water.
METHOD OF APPLICATION
Before engaging the gear, the person who will do the spraying must hold tight the nozzle
and have firm footing on stable ground as he will expect a strong back-kick the moment
the slurry shoots out of the nozzle.
b) Do not shoot the slurry directly to the soil surface. Instead, it should be done in the form
of raindrops in a uniform pattern. Ensure even coverage of slurry on soil surface. One
machine load with proper application can cover approximately 600 to 700 m2.
c) Watering (also in the form of raindrops) on the hydroseeded area can start immediately
the next day and must be continued daily in the initial stage to ensure speedy germination
and growth. Light watering will not help much due to our hot climatic condition.
a)
Page 2 of 3
AKTIF UNGGUL
SDN BHD
METHOD OF
STATEMENT
Therefore, sufficient and proper watering must be done ensuring water seep into the soil
yet avoiding overflow of water on the soil surface.
NOTE: Hydroseeding shall never be applied during, before or immediately following
rainfall. Avoid application in high winds. Machines and tools should be flushed and
clean with water immediately after use. All moving parts should be oiled and greased
regularly.
11.0
QUALITY RECORDS
Lab records
Request for Inspection (RFI)
Quality Checklist
Page 3 of 3