Documente Academic
Documente Profesional
Documente Cultură
06CV52
I I I I I I I I I I I
Fifth Semester B.E. Degree Examination, December 2012
Design of Structures RCC
Time: 3 hrs.
_;,.-
-~ .,.,o"II
c
a.
PART-A
Explain the following:
i) Partial safety factor for loads and materials
ii) Characteristics loads
iii) Characteristics strength
b. Explain the philosophy and principles of limit state method of RCC design.
c.
QC>
cti
(05 Marks)
o:s"""
Q)
Q)
(06 Marks)
Explain the stress block parameters, with neat sketches for a rectangular RC section.
5 oB
.....
(09 Marks)
;S ~
c ;::
0
:g
a.
A RCC beam of rectangular section 300mm wide and overall depth of 850 mm is reinforced
with 4 bars of 25mm diameter on the tension side. Effective cover = 50mm. Find the
ultimate moment of resistance of the section, if fck = 20 N/mm2 and fy = 415 N/mm2 . Find
(10 Marks)
the additional reinforcement required to make this a balanced section.
b.
a.
Distinguish between short term and long term deflection in case of RC structures. Mention
the main factors which affect these deflections.
(06 Marks)
b.
A simply supported beam of rectangular section 250x450mm overall depth is used over. an
effective span of 4m. The beam is reinforced with 3-20 mm~ at an effective depth of
400mm. Two-hanger bars of 1OOmm~ are provided. Dead load inclusive of
self wt. = 4 kN/m, service load= IO kN/m, using Fe-415 bars and M 20 grade concrete are
used. Compute i) The short-term deflection. ii) The long-term deflection as per IS 456-2000.
.g
~ ~
-o:s
{)
C"
Q)
.....
0
:;;
~~
~ B
~ .2
-o o:s
>. >
] ;
. .~ 1
1..
::.....g.
8. .
t -~
~~
.....
g
Q)
[~
. ~
~:a
c.. Q)
c >o~
(14 Marks)
.....;N
E
0
E
~
0
c..
A tee beam slab floor of an office comprises of a slab 150mm thick spanning between ribs
spaced at 3 m c/c. The effective span of the beam is 8m. Live load on floor is 4 kN/m2 . Using
M-20 grade concrete and Fe 415 HYSD bars, design one of the intermediate beam.
(20 Marks)
1 of2
06CV52
PART-B
5
Design a one way slab for an office floor which is continuous over tee beams spaced at 3.5m
intervals. Assume a live load of 4 kN/m2 and adopt M-20 grade concrete and Fe-415 steel.
(20 Marks)
a.
b.
Design the reinforcements in a short column 400 x400mm at the corners of a multistoreyed
building to support an axial factored load of 1500 kN, together with biaxial moments of
50kN-m acting in perpendicular planes. Adopt M-20 grade concrete and Fe-415 HYSD bars.
(10 Marks)
Design one of the flight of a dog-legged stairs spannmg between landing beams using the
following data:
No. of steps in the flight= 10
Thread = T = 300 mm, Rise = R = 150mm.
Width of landing beams = 300 mm
Using M20 grade concrete and Fe-415 bars.
(20 Marks)
*****
2 of2