Documente Academic
Documente Profesional
Documente Cultură
November 2014
Contents
INTRODUCTION ..........................................................................................................................................................4
Ericsson General Performance Event Handling (GPEH) .........................................................................................4
Ericsson Long Term Evolution (LTE) Call Trace .......................................................................................................4
Huawei Call History Recording (CHR) .....................................................................................................................5
Huawei LTE Call Trace .............................................................................................................................................5
Nokia Siemens Network (MEGAMON) ...................................................................................................................5
ZTE Call Trace System (CTS) ....................................................................................................................................5
IMPORTING TRAFFIC RECORDING FILES .....................................................................................................................7
Ericsson GPEH/UETR/CTR log .................................................................................................................................7
Huawei CHR log ......................................................................................................................................................7
Nokia Megamon log ...............................................................................................................................................7
Ericsson LTE Call Trace log ..................................................................................................................................... 8
ZTE CTS log..............................................................................................................................................................8
Huawei LTE Call Trace log .......................................................................................................................................8
START PAGE ANALYSIS ............................................................................................................................................. 14
Issue Analysis ....................................................................................................................................................... 15
GeoAnalysis ......................................................................................................................................................... 18
Plotting ............................................................................................................................................................ 18
Plotting Cell Coverage ..................................................................................................................................... 20
Viewing Estimated Call Location ..................................................................................................................... 21
Throughput Analysis ............................................................................................................................................ 22
Neighbor Analysis ................................................................................................................................................ 23
Neighbor Optimization .................................................................................................................................... 23
Pilot Pollution Analysis ........................................................................................................................................ 26
Phone Profiling Analysis ...................................................................................................................................... 28
VIP Analysis.......................................................................................................................................................... 28
Coverage Analysis ................................................................................................................................................ 29
Smartphone Analysis ........................................................................................................................................... 31
INTRODUCTION
Traffic Measurement Recordings Modules are available on most major vendors OSS system. This means that
each vendor will have their own recording function that might vary from one vendor to another. This extremely
powerful data source consists of detailed event and measurement data of a significant portion of your users live
traffic. By running selected optimization tasks in Xeus Pro 5, optimization engineers can drill down quickly to
optimize known areas with quality issues, and analyze the recording results to pin-point parts of the network
these issues are coming from.
Xeus Pro has extensive analytics and diagnostics capabilities which allow optimization professionals to leverage
on this rich customer experience data to troubleshoot and optimize the network better especially in areas
where quality issues are hard to replicate via traditional drive-test methods. TMR Modules in Xeus Pro currently
collectively consist of the Ericsson GPEH & LTE Call Trace, Huawei PCHR & LTE Call Trace, Nokia Megamon, and
ZTE WCDMA & WCDMA LTE (CTS).
Modules
Features
Ericsson GPEH
Ericsson- LTE
Call Trace
HuaweiPCHR
HuaweiLTE Call
Trace
NokiaMegamon
ZTEWCDMA CTS
ZTEWCDMA
LTE CTS
Supported
File Version
P6 - W14A
L11A - L14A
R10 RAN16,
SPC510
SIGLOG
V100R5
RU20, RU30
3.11, 4.11,
4.12, 4.13
3.11, 4.11,
4.12, 4.13
Cell Analysis
Throughput Analysis
N/A
N/A
N/A
Neighbor Optimization
N/A
N/A
N/A
Pilot Pollution
N/A
VIP Analysis
Phone Profiling
N/A
N/A
Coverage Analysis
N/A
Smartphone Analysis
N/A
N/A
N/A
N/A
N/A
Call
Events
Messages
N/A
N/A
N/A
N/A
N/A
Analysis
Search
Smart Analysis
Plot
GeoAnalysis
N/A
View
Messages
Measurement
Cell Utilization
N/A
N/A
N/A
N/A
Cell Coverage
N/A
KPI
Excel
Report
Call
If you are performing GeoAnalysis, ensure that the network data selected is Ericsson Bulk CM or Ericsson Kget
log file.
Now, follow these steps to start importing your Traffic Recording log files:
1. Go to File > Import and Export > Import Traffic Recording logs (Ericsson GPEH OR Huawei OR NSN
Megamon OR ZTE CTS OR Ericsson LTE Call Trace)
Please note:
Single parsing of traffic recording files has been implemented (Previously, multiple parsing allows) to the
improve speed in Xeus Pro 5 application.
10
Ericsson Logs
1. At General tab, set the Time Offset
according to your time zone.
2. If you are performing GeoAnalysis,
ensure that you tick on Enable
GeoAnalysis. Note: Ensure that the
loaded network file contains RRC
Measurement Report and NBAP Radio
Link Setup Request messages.
3. Click to enable auto create excel
report option and users can change
the existing template by clicking the
browse button.
4. Click the Filters tab to set the filter
options. Select a Filter Template and
click "Settings" button to set to the
"Messages Filter" and the "Call End
Filter". Click "OK" button to save the
changes made at GPEH filter and for
you to reload the same settings later.
5. Select the Settings tab to edit
thresholds.
Huawei Logs
1. Select the Filter option by ticking on
the required checkbox.
2. Click to enable auto create excel
report option and users can change
the existing template by clicking the
browse button.
3. Click on Settings tab, if you wish to
manually define the value for Missing
Neighbor Hysterisis (dB).
11
Megamon Logs
1. At General tab, if you are performing
GeoAnalysis, ensure that you tick on
Enable GeoAnalysis.
2. Click to enable auto create excel
report option and users can change
the existing template by clicking the
browse button.
3. Select the Settings tab to edit
thresholds.
12
Once the progress bar completes, there will be a notification which says 'Parsing completed successfully' and it
will display the parsing duration. If parsing is successful, users are ready to analyze your Traffic Recording data.
Please Note:
For CHR, if the parsing exceeds 1 hour, it will automatically prompt an error message. Xeus Pro 5 can only parse
the log file that contains Performance Call History Recording (PCHR). If the parsing does not contain the PCHR
data, an error message will appear to notify the user of the parsing error.
13
Start Page
Database
Database Summary
Start page contains summary of Call Type and Call End Type in percentage, issues found and suggested actions
for user issues.
14
Issue Analysis
Xeus Pro 5 allows users to immediately analyze issues from Start Page.
To analyze:
1. Select Cells with more than 3% dropped calls at the Issues section
2. View the affected cell(s) at the graph on your right. Mouse over on the graph to view the total dropped
calls and percentage for each cell
3. Click on Analyze further with Dropped Call Analysis link at the Suggested Actions area. Users will be
directed to Dropped Call Analysis page
15
4. Users can define the KPI-Threshold under Issue Analysis by going to Tools > Options.
Figure 7- Example of Analyzing Traffic Recording Data (GPEH Data used here)
16
5. At the Dropped Call Analysis page, right click on a slice at the chart and click on List All Dropped Calls at
the context menu.
6. Users can view all dropped calls at the workbench. Refer to the image below.
7. Click on the Load Views at your workbench. Users can view events & messages and measurements for
each drop call here. Refer to the previous image above.
8. For CHR, there is an additional Logs tab located at the upper right side of the Views column to view
the detailed CHR log messages as shown in Figure 8 below.
9. Locate a drop call event on the map by selecting the drop call and checking at the checkbox on your
workbench. Refer to the previous image.
17
10. Click on the Actions button on your workbench and select Display UE Positions on Map.
11. Use your map and Google Earth to view event and route.
GeoAnalysis
GeoAnalysis is an estimation of the calls or events based on a geographical location. This feature enables users
to generate various plotting scenarios based on the estimated geographical location for the Traffic Recording
calls. Users can also analyze normal and abnormal events within the dimension of the estimated location. Xeus
Pro 5 uses several propagation delay and mobile triangular calculation to perform location estimation.
Please Note:
Geo-location method uses cells coordinate (longitude & latitude) instead of site id for better accuracy.
Plotting
Ensure that the Plot tab is selected.
18
To create plots, first select the type of plot to display. Click on the Load Plot button
remove a plot, click on the Remove Plot from Map button
plot. For details on the other tools in the toolbar, please refer to the Xeus Pro Help file.
Please Note:
You can also use the Clear Show Layers button
19
To plot individual cell coverage the cell from the Select CellId drop-down box and the Coverage type to view.
Click on the Load button to load the individual cell plot.
20
Users will be able to view the estimated UE Position of the call on the map. You can see the Start Distance and
End Distance for a call on Workbench.
21
Throughput Analysis
*Currently available in Ericsson GPEH & LTE Call Trace and Huawei PCHR & LTE Call Trace Modules only
Throughput Analysis provides users with a detailed chart based on the best to the lowest throughput detected
during a call using traffic recording data.
2. You can drill down further to view Best/Worst Cell Analysis or Cell UERC Analysis as shown in Figure 15
below :
22
Neighbor Analysis
Users can also conduct Neighbor Analysis using Traffic Recording data. Types of Neighbor Analysis which could
be done are:
Neighbor Optimization
Pilot Pollution.
Neighbor Optimization
Neighbor Optimization ranks the top neighbors for the cell and also suggests action to be done to the neighbor.
To optimize neighbor for a cell:
1. Go to Start Page > Neighbor Optimization at the Start Page address bar. Refer to Figure 16 below:
23
Merit Point (MP) = [(Attempt for Position 1)*P1 + (Attempt for Position 2)*P2 + (Attempt for
Position 3)*P3 + (Attempt for Position 4)*P4] x [(Missing Neighbor with
Release)*M1 + (Missing Neighbor without action)*M2] / (Total Attempt)
4.
Enter Minimum Event Count, Maximum number of Neighbors and Minimum Neighbor Ec/No.
24
5. Tick Exclude Missing Neigh No Action events if users do not wish to include the Missing Neigh No
Action Multiplier (M2) calculation into the missing neighbors analysis formula.
6. Click on the Analyze button.
7. List of cells and neighbors ranked according to priority, based on merit points and category will be
displayed at the workbench
25
11. Users will see the action gets recorded in Action History located at Network Views.
To view the updated relation for the cell, click on the Analyze button at the Neighbor Optimization page again.
Pilot Pollution enables you to find polluter cells so that you can remove them to optimize network. To find
polluter cells for each cell:
1.
26
Step through the pollution list to view cell location at the map or Google Earth.
27
You can search for particular phone models from the database and view the calls and events information.
This summary page makes it easier to analyze frequency of events for a phone model type.
To perform Phone Profiling Analysis, do the following:
VIP Analysis
VIP analysis allows users to manage their most important clients call quality as they are able to search for a
particular IMSI from the database and view the Statistics and call information. This feature also allows users to
bookmark an IMSI for future analysis.
28
Coverage Analysis
*Currently available in Ericsson GPEH & LTE Call Trace, Huawei PCHR & LTE Call Trace, Nokia Megamon and ZTE CTS (WCDMA) Modules
only
Coverage analysis enables users to identify the highest percentage of over coverage cells. Over coverage cells
are cells with values that are higher than the mean setup distance and this includes overshooting cells.
29
30
Smartphone Analysis
* Currently available in Ericsson GPEH and Huawei PCHR Modules only
The Smartphone Analysis feature provides a unique window into the performance of Smartphones in a 3G
network. Users can perform PS Signalling Analysis to detect Fast Dormancy Event, RRC State Transition for the
PS Channel Event, Call End due to Fast Dormancy, and Phone Level PS Statistics.
Users can view details on time taken in each state (Cell PCH, FACH, and DCH), RRC State Transitions and data
transfers on UL/DL per phone model.
31
2. The Smartphone Analysis dashboard allow users to view the RRC State Transition and other Smartphone
KPI Analysis.
32
Search by Call
You can search by call using the steps below:
1. Select Toolbox tab on your left panel
2. Select the Search menu and click on Search By Call
33
Search by Event
You can also search by event.
To search by event:
1. Select Toolbox tab on your left panel
2. Select the Search menu and click on Search By Event
3. Click on Clear button as ALL is selected as default
4. Select an event from the Event Type and hit the Search button
5. Your result will display on the workbench at the Event Summary tab
6. Step through the workbench to locate the event.
7. The event will be automatically displayed at the map or GE when you step through
8. To view the route, click on the checkbox beside the event at the workbench. Then, click the Actions
button and click to display route on map.
34
Search by Message
*Currently available in Ericsson GPEH Module only.
Messages View
Measurement View
35
Messages View
Messages View displays Events and Messages for the Calls selected at the workbench.
To view the Events & Messages for the Call:
1. Right click on the charts at Start Page to list down the calls at the workbench.(Users could also use this
view when use the Search Tool at the Toolbox)
2. Select the 'Load Views' button at the workbench. Users could also go to View > Traffic Recording
Views.
3. Step through on the workbench to view Event & Messages for different calls
4. Users can also see the position of the Event at the Map and GE when step through at the workbench
5. At this view, click on an event to display the corresponding message.
6. Double click or right click to view details of the event or message
7. Highlighted to select all details at the Message Details using short-cut or context menu to copy the
details.
36
Measurement View
Measurement View displays Active Set/Neighbors information. Users can analyze EcNo and RSCP against time
using the Measurement Chart and Data. Refer to the Help file for more information on the Measurement Chart.
1. Select Views > Traffic Recording Views> Cell Utilization to access the Cell Utilization page.
2. Select the required Cell.
3. Tick on the checkbox of required cell utilization element.
4. Click on the required time on the graph to view the cell utilization value for that selected time. (Click &
Drag to zoom in the chart)
37
Description
The unique Cell Identity/Name of the cell e.g. G1001A.
Note: Xeus Pro does not accept two records with SAME Cell Id. Any duplicate
cell Id will be renamed with additional suffix e.g. G1001A_1.
Mandatory field
SiteId
Longitude
Latitude
AntDir
RncId
RNC Identity
Note: RncId-Cid pair allows matching of WCDMA Cell network data to the site
data in Xeus Pro database
CId
38
39
RRC
Event
INTERNAL_ADMISSION_CONTROL_RESPONSE
INTERNAL_CALL_REESTABLISHMENT
INTERNAL_CALL_SETUP_FAIL
INTERNAL_CHANNEL_SWITCHING
INTERNAL_CMODE_ACTIVATE
INTERNAL_CMODE_DEACTIVATE
INTERNAL_CNHHO_EXECUTION_ACTIVE
INTERNAL_FAILED_HSDSCH_CELL_CHANGE
INTERNAL_FAILED_TRANSITION_TO_DCH
INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELECTED
INTERNAL_IFHO_EXECUTION_ACTIVE
INTERNAL_IMSI
INTERNAL_IRAT_HO_CC_EVALUATION
INTERNAL_IRAT_HO_CC_EXECUTION
INTERNAL_MEASUREMENT_HANDLING_EXECUTION
INTERNAL_OUT_HARD_HANDOVER_FAILURE
INTERNAL_OUT_HARD_HANDOVER_SUCCESS
INTERNAL_PACKET_DEDICATED_ THROUGHPUT
INTERNAL_PACKET_DEDICATED_THROUGHPUT_STREAMING
INTERNAL_PS_RELEASE_DUE_TO_CNHHO
INTERNAL_RAB_ESTABLISHMENT
INTERNAL_RAB_RELEASE
INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH
INTERNAL_SOFT_HANDOVER_EXECUTION
INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR
INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_NEW_ACTIVE_SET
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_OLD_ACTIVE_SET
INTERNAL_SUCCESSFUL_TRANSITION_TO_DCH
INTERNAL_SYSTEM_BLOCK
INTERNAL_SYSTEM_RELEASE
INTERNAL_SYSTEM_UTILIZATION
INTERNAL_UE_POSITIONING_QOS
RRC_CELL_CHANGE_ORDER_FROM_UTRAN
RRC_CELL_CHANGE_ORDER_FROM_UTRAN_FAILURE
RRC_CONNECTION_REJECT
RRC_CONNECTION_RELEASE
40
RANAP
Event
NBAP
Event
RRC_CONNECTION_REQUEST
RRC_DOWNLINK_DIRECT_TRANSFER
RRC_HANDOVER_FROM_UTRAN_COMMAND
RRC_HANDOVER_FROM_UTRAN_FAILURE
RRC_INITIAL_DIRECT_TRANSFER
RRC_MEASUREMENT_CONTROL
RRC_MEASUREMENT_REPORT
RRC_SIGNALLING_CONNECTION_RELEASE_INDICATION
RRC_UPLINK_DIRECT_TRANSFER
RANAP_COMMON_ID
RANAP_IU_RELEASE_COMMAND
RANAP_IU_RELEASE_COMPLETE
RANAP_IU_RELEASE_REQUEST
RANAP_RELOCATION_COMMAND
RANAP_RELOCATION_PREPARATION_FAILURE
NBAP_RADIO_LINK_SETUP_REQUEST
NBAP_CELL_SETUP_REQUEST
9. Select the UE Fraction for the percentage of mobile that will be recorded.
10. Input the schedule for the profile recording. It is advisable to make sure there is no others running
recording on the planned schedule.
11. Once complete, the collected GPEH files will be located in
/var/opt/ericsson/nms_umts_pms_seg/segment1/GPEH/ folder.
41
Description
CellId
SiteId
Longitude
Latitude
AntDir
RncId
RNC Identity
Note: RncId-Cid pair allows matching of WCDMA Cell network data to the site
data in Xeus Pro database
CId
42
3. CHR Log
3.1 CHRs File Path
The CHRs are generated automatically and stored under the BAM in the following path:
-
The PCHR log will have either UCHR or PCHR word in the filenames e.g.
-
43
Important: For R11 and above, please ensure that the file name ha UCHR or PCHR. File with
CHR string alone does contain the performance call log and not supported in Xeus Pro.
If one of the fields is not enabled in the CHRs, use the following command to enable it:
1. In the LMT tool, execute the command SET CHRRNCCTRL (R10) or SET UCHRCTRL (R11) in the
Command Input field.
2. Click the SELECT ALL check box in the Type option drop down lists.
3. Run the command through a batch file only:
Huawei R10
SET CHRRNCCTRL:STATETYPE=ABNORMAL_ONLY-1&NORMAL_ONLY-1, DOMAINTYPE=CS_ONLY-1&PS_ONLY-1, FLOWTYPE=CONN_SETUP1&RAB-1&DCCC-1&SHO-1&HHO-1&SYS_HO_OUT-1&RRC_RELEASE-1&STAT-1&NET_OPT-1,
RRCCAUSE=ORIGINATING_CONVERSATIONAL_CALL-1&ORIGINATING_STREAMING_CALL-1&ORIGINATING_INTERACTIVE_CALL1&ORIGINATING_BACKGROUND_CALL-1&ORIGINATING_SUBSCRIBED_TRAFFIC_CALL-1&TERMNT_CONVERSATIONAL_CALL1&TERMNT_STREAMING_CALL-1&TERMNT_INTERACTIVE_CALL-1&TERMNT_BACKGROUND_CALL-1&EMERGENCY_CALL1&INTER_RAT_CELL_RESELECTION-1&INTER_RAT_CELL_CHG_ORDER-1®ISTRATION-1&DETACH-1&ORIGINATING_HIGH_PRIOR_SIG1&ORIGINATING_LOW_PRIOR_SIG-1&CALL_RE_ESTAB-1&TERMNT_HIGH_PRIOR_SIG-1&TERMNT_LOW_PRIOR_SIG1&TERMNT_CAUSE_UNKNOWN-1&MBMS_RECEPTION-1&MBMS_PTP_RB_REQ-1;
44
Description
The unique Cell Identity/Name of the cell e.g. G1001A.
Note: Xeus Pro does not accept two records with SAME Cell Id. Any duplicate
cells Id will be renamed with additional suffix e.g. G1001A_1.
Mandatory field
SiteId
Longitude
Latitude
AntDir
RncId
RNC Identity
Note: RncId-Cid pair allows matching of WCDMA Cell network data to the site
data in Xeus Pro database
CId
45
46
b. Do not check on the output type as the output file extension will be in *.MGA binary
format.
c. Set the time based to 10 min
d. Check the PC HD space and apply conditional items removal accordingly
e. Do not check on any options settings
f.
Set the format of the output filename as your preference. Advisable filename to include
network element with year, month, date, hour, minute and seconds.
47
2.
3.
4.
Click Export
48
1.
On the Performance menu of the OSS Network Explorer window, click Initiate data Collection then click
RAN Measurements.
2.
To create a new Subscription Profile select Add profile from the Administration menu, then the Add
subscription profile wizard will appear. There follows a series of steps at the end of which a new
Subscription Profile will be created. Move between the steps using the Next and Previous buttons.
49
3.
4.
At the select eRBS, select at least 10 eRBS that are in the same cluster.
50
5.
6.
7.
8.
9.
51
10. Click Next to set up Schedule. Choose immediate and run the trace for 3 hours.
11. Follow through to start the recording.
12. At the LTE Cell Trace Profiles tab, select the newly created profile, Right click on the UE ID Mapping label
and select Enable UE ID mapping
52
53
2. OSS Common Explorer will appear on the screen as shown in the figure below. At Topology Tab, select
the Root node from the network tree. Then, right click and select Export. option from the context
menu.
54
3. After clicking on Export. option, Bulk CM Export dialog box will appear as shown in the figure below.
Tick to select Radio Network only as a filter details option and click Export button.
55
56
57
58
59
3. Add GPEH subscription profile wizard will appear on the screen as shown in the figure below. Select the
required recording type. (GPEH, CTR or UETR) Click Next button to proceed to the next step.
60
4. Type in the Profile name and click Next button to proceed to the next step.
61
62
5. Select RNC network elements should be observed and click Next button to proceed to the next step.
6. Select the required RNC you would like to collect and click Next button to proceed to the next step.
63
7. Select the required Utran Cells for recording and click Next button to proceed to the next step.
64
8. Select the events for the GPEH recording and click Next button to proceed to the next step.
65
66
9. Select the UE Fraction (Percentage of mobile that will be recorded) and click Next button to proceed to
the next step.
67
68
11. Monitor the progress at Profile display tab > General performance even handling profiles.
69
Analysis Type
Cell Set
Recording
Setting
gpehDataLevel =
1 (ALL DATA)
Ue_Fraction =
500
RRC Event
RRC_CELL_CHANGE_ORDER_FROM_UTRAN
RRC_CELL_CHANGE_ORDER_FROM_UTRAN_FAILURE
70
RRC_CONNECTION_REJECT
RRC_CONNECTION_RELEASE
RRC_CONNECTION_REQUEST
RRC_DOWNLINK_DIRECT_TRANSFER
RRC_HANDOVER_FROM_UTRAN_COMMAND
RRC_HANDOVER_FROM_UTRAN_FAILURE
RRC_INITIAL_DIRECT_TRANSFER
RRC_MEASUREMENT_CONTROL
RRC_MEASUREMENT_REPORT
RRC_UPLINK_DIRECT_TRANSFER
RANAP Event
RANAP_COMMON_ID
RANAP_IU_RELEASE_COMMAND
RANAP_IU_RELEASE_REQUEST
RANAP_RELOCATION_COMMAND
RANAP_RELOCATION_PREPARATION_FAILURE
NBAP Event
NBAP_RADIO_LINK_SETUP_REQUEST
GPEH Internal Event
INTERNAL_CALL_REESTABLISHMENT
INTERNAL_CHANNEL_SWITCHING
INTERNAL_CNHHO_EXECUTION_ACTIVE
INTERNAL_FAILED_HSDSCH_CELL_CHANGE
INTERNAL_FAILED_TRANSITION_TO_DCH
INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELE
CTED
INTERNAL_IFHO_EXECUTION_ACTIVE
INTERNAL_IRAT_HO_CC_EVALUATION
INTERNAL_IRAT_HO_CC_EXECUTION
INTERNAL_MEASUREMENT_HANDLING_EXECUTION
INTERNAL_PACKET_DEDICATED_THROUGHPUT
INTERNAL_RAB_ESTABLISHMENT
INTERNAL_RAB_RELEASE
INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH
INTERNAL_SOFT_HANDOVER_EXECUTION
INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR
INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_N
EW_ACTIVE_SET
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_O
LD_ACTIVE_SET
INTERNAL_SUCCESSFUL_TRANSITION_TO_DCH
INTERNAL_SYSTEM_BLOCK
INTERNAL_SYSTEM_RELEASE
INTERNAL_SYSTEM_UTILIZATION
INTERNAL_OUT_HARD_HANDOVER_FAILURE
INTERNAL_OUT_HARD_HANDOVER_SUCCESS
Whole RNC
gpehDataLevel =
0 (HEADER
ONLY)*
Ue_Fraction =
500
*The plot will be
limited to the
Active Set from
the internal
message.
Monitored Set
measurement
will not be
available
71
Neighbor
Optimization
including missing
neighbor and Pilot
Pollution Analysis
Phone Profiling
Smartphone
NBAP Event
NBAP_RADIO_LINK_SETUP_REQUEST
RANAP Event
RANAP_COMMON_ID
GPEH Internal Event
INTERNAL_CALL_REESTABLISHMENT
INTERNAL_SOFT_HANDOVER_EXECUTION
INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR
INTERNAL_OUT_HARD_HANDOVER_FAILURE
INTERNAL_OUT_HARD_HANDOVER_SUCCESS
RRC Event
RRC_CONNECTION_RELEASE
RRC_CONNECTION_REQUEST
NBAP Event
NBAP_RADIO_LINK_SETUP_REQUEST
RANAP Event
RANAP_COMMON_ID
GPEH Internal Event
INTERNAL_ADMISSION_CONTROL_RESPONSE
INTERNAL_CALL_REESTABLISHMENT
INTERNAL_CALL_SETUP_FAIL
INTERNAL_CNHHO_EXECUTION_ACTIVE
INTERNAL_FAILED_HSDSCH_CELL_CHANGE
INTERNAL_FAILED_TRANSITION_TO_DCH
INTERNAL_IFHO_EXECUTION_ACTIVE
INTERNAL_IRAT_HO_CC_EXECUTION
INTERNAL_MEASUREMENT_HANDLING_EXECUTION
INTERNAL_RAB_ESTABLISHMENT
INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH
INTERNAL_SOFT_HANDOVER_EXECUTION
INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR
INTERNAL_SYSTEM_BLOCK
INTERNAL_SYSTEM_RELEASE
RRC Event
RRC_CONNECTION_RELEASE
RRC_CONNECTION_REQUEST
RRC_DOWNLINK_DIRECT_TRANSFER
RRC_INITIAL_DIRECT_TRANSFER (Mandatory)
RRC_UPLINK_DIRECT_TRANSFER (Mandatory)
RANAP Event
RANAP_COMMON_ID
RANAP_IU_RELEASE_COMMAND
RANAP_IU_RELEASE_REQUEST
NBAP Event
NBAP_RADIO_LINK_SETUP_REQUEST
RRC Event
Whole RNC
gpehDataLevel =
0 (HEADER ONLY)
Ue_Fraction =
800
Whole RNC
gpehDataLevel =
1 (ALL DATA)
Ue_Fraction =
500
Whole RNC
gpehDataLevel =
72
Analysis
GPEH Plots
RRC_CONNECTION_RELEASE
RRC_CONNECTION_REQUEST
RRC_DOWNLINK_DIRECT_TRANSFER
RRC_INITIAL_DIRECT_TRANSFER (Mandatory)
RRC_UPLINK_DIRECT_TRANSFER (Mandatory)
NBAP Event
NBAP_CELL_SETUP_REQUEST
RANAP Event
RANAP_COMMON_ID
RANAP_IU_RELEASE_COMMAND
RANAP_IU_RELEASE_REQUEST
GPEH Internal Event
INTERNAL_CALL_REESTABLISHMENT
INTERNAL_CALL_SETUP_FAIL
INTERNAL_CHANNEL_SWITCHING
INTERNAL_IMSI
INTERNAL_OUT_HARD_HANDOVER_FAILURE
INTERNAL_OUT_HAND_HANDOVER_SUCCESS
INTERNAL_PACKET_DEDICATED_THROUGHPUT
INTERNAL_PACKET_DEDICATED_THROUGHPUT_CONV
_SPEECH
INTERNAL_PACKET_DEDICATED_THROUGHPUT_CONV
_UNKNOWN
INTERNAL_PACKET_DEDICATED_THROUGHPUT_STRE
AMING
INTERNAL_RAB_ESTABLISHMENT
INTERNAL_RAB_RELEASE
INTERNAL_SYSTEM_BLOCK
RRC Event
Whole RNC
RRC_CONNECTION_RELEASE
RRC_CONNECTION_REQUEST
RRC_MEASUREMENT_REPORT
NBAP Event
NBAP_RADIO_LINK_SETUP_REQUEST
GPEH Internal Event
INTERNAL_SYSTEM_RELEASE
Table 5 GPEH Recording Scenarios
1 (ALL DATA)
Ue_Fraction =
500
gpehDataLevel =
1 (ALL DATA)
Ue_Fraction =
500
Analysis Type
Call Trace (UETR) or
Cell Trace (CTR)
73
1) First, create a LTE Cell Trace task in M2000 before capturing the call trace. The output file format is
SIGLOG.
2) After capturing the log, you can export the log from eNodeB by executing the MML commands as the
following:
74
75
About InfoVista
InfoVista is the leading provider of IP and RF planning, assurance and optimization software solutions and
services that enable efficient network and IT transformations. Our award-winning solutions empower
communications service providers and IT-intensive enterprises to deliver high-performing and differentiated
services while cost-effectively planning, operating, optimizing and monetizing their network.
InfoVistas combined expertise and technology innovations in radio and IP networks provide more than 550
customers worldwide with a new level of network intelligence, visibility and control across the entire network
life cycle. Using InfoVistas solutions, they deliver optimal quality of service, ensure a high-quality user
experience, invest appropriately and consolidate their OSS/BSS ecosystems while keeping total cost of
ownership as low as possible.
76