Documente Academic
Documente Profesional
Documente Cultură
DISSERTATION
DISSERTATION GUIDE
NAME OF STUDENT
(0351731605 )
UNIVERSITY SCHOOL OF ARCHITECTURE AND PLANNING
Dissertation Title
Approval Certificate
The following study is hereby approved as a creditable work on the approved subject, carried
It is to be understood that by this approval the undersigned does not necessarily endorse or
approve any statement made, opinion expressed or conclusions drawn therein, but approve
the study only for the purpose for which it is submitted and satisfies himself as to the
(0351731605)
Batch 2005-10
Date: 11-01-2010
ACKNOWLEDGEMENT
During the course of my dissertation there have been a number of people who have been
greatly helpful with their personal capacities in various ways. I take this opportunity to
express my deep gratitude for the co-operation and patience they have shown.
I am grateful to my guide Mr. Verendra Wakhloo for providing me with invaluable inputs
and encouragement, helping me tirelessly throughout the process and having complete faith
No words can express my gratitude to my parents and my friends for the constant moral
Thank you,
Dated:
PART 1:
1.1 Introduction
1.2 Method of Approach
1.3 Scope of study
PART 2:
2.1 Globalization
2.2 Brief History
2.3 Effects of Globalization
PART 3:
3.1 Technology
3.2 Technology and Globalization
3.3 Technology and Architecture
PART 4:
4.1 Defining High Tech
4.2 High Tech Architecture
4.3 Principles and Ideologies of High Tech architecture
4.4 Brief History
PART 5:
Conclusion
PART 6:
6.1 India International Centre : case study
6.2 East Gate Centre : case study
6.3 Beylers foundation museum : case study
6.4 Menara Mesiniaga : case study
PART 7:
The Way Out
PART 8:
BIBLIOGRAPHY
PART-1
1.1 INTRODUCTION:
HYPOTHESIS:
Globalization is a phenomenon that has been taking place since man started trading. But in
last two decades with the increase in the Communication system, Internet, Transport system
and many other technological developments this has happened at an extremely large scale
and at unbelievingly rapid pace. If we explore the historical background of this phenomenon
The first lasted from 1492-1800, when Columbus set sail, opening trade between the old
world and the new world. During this era the countries were globalizing in the search of
The second great era lasted roughly from 1800 to 2000. In this era multinational companies
went global for markets and labor. This era was powered by the achievements of industrial
revolution and many other technological developments like telegraph, telephones, the PC,
satellites, fiber-optic cable, and the early version of World Wide Web. It was in this era that
Around year 2000 we entered a whole new era of globalization. The uniqueness of this era of
globalization is that in this era there are individuals and group of individuals are globalizing.
Peoples now can collaborate and compete globally, and the dynamic force which is these
enabling individuals and groups to go global is not horsepower (as in era 1), and not,
hardware (as in era 2) but software. All sorts of new applications in computer programs in
combination with the creation of global fiber optic network has created a global platform on
which people from all corners of the world can collaborate and compete, thus making us all
Today when one orders a computer to a call center, he get it in around 7 days and it doesnt
matter that in which part of the world is that call centre located, where does the parts of the
computer are produced and assembled. It also dont matters at all that where does the
software are manufactured and at which place they are downloaded to the computer, all
these activities happens just as the order is booked on the phone or internet and the payment
This is the global world in which we are living today, and with opening of the market
economies, many MNC, BPO, malls, banks, and fast food restaurants have started to open there
branches, all over world. This affects the lifestyle and the culture, and these changes the
aspirations of the people. This development has impact on the various form of cultural activities
This has opened up the challenge to revaluate the architecture which reflects the status of a
In order to demonstrate development of their society, many individuals are trying to produce
In this ambition of showing development of society- many architects are just replicating the
image of architecture, produced somewhere else, and those buildings stand as aliens in that
region.
So there is a need to analyze the tools, which one should use to create architecture of a place,
which expresses development of that society and is part of its surroundings. This dissertation
focuses on particular one style of architecture which uses technology as a source of inspiration,
and will explore that how can one use its principles and tools to create a region responsive
architecture.
globalization, and its effect on present architectural trends. This study also
2. Further the study investigates critically the globally accepted technology inspired
High Tech architecture. Study concludes that global hi tech architecture does not
3. The study finally tries to find out the instances that how an architect can indigenize
1. Analysis and conclusions are done on the basis of the text read through books, published
2. Case studies are restricted to analyze the extent of the integration of technology to the
local conditions.
PART-2
2.1 Globalization:
economies, societies, and cultures have become integrated through a globe-spanning network
of communication and execution.1It is the socio, political-economic condition that cut cross
boundaries between countries and decisively controls the faith of those living between each
of them. The term can also refer to the transnational circulation of ideas, languages, or
or regional phenomenon into global one. It can be described as a process by which the
people of the world are unified into a single society and function together.
It refers to that process whereby geographically distant events and decisions impact to a growing
affairs by linking together and expanding human activity across regions and continents. 3
People around the globe are more connected to each other than ever before. Information and
money flow more quickly than ever. Goods and services produced in one part of the world
are increasingly available in all parts of the world. International travels are more frequent.
Globalization. 4
1
From website: - en.wikipedia.org/wiki/Globalization.
2
From website: - en.wikipedia.org/wiki/Globalization.
3
definitions from Impact of Globalization on the Local Built Environment and the Emergence of Architectural
Anarchy in Nigerian Urban Centres.
4
http://www.emarketing.ie/resources/glossary.html#g
.
2.2 Brief History:
Globalization is not a new phenomenon; it is as old as the history, starting with the migration
of the people across the great landmasses. Thomas L. Friedman in his book The world is
FLAT explains the brief history of globalization by dividing it into three great eras-
The first lasted from 1492 until around 1800- when Columbus set sail, opening trade
between the old world and the new world. Shortly before the turn of the 16th century,
Portuguese started establishing trading posts (factories) from Africa to Asia and Brazil, to
deal with the trade of local products like gold, spices and timber, introducing an international
The second great era lasted roughly from 1800 to 2000. This time it was not the countries
which were going global they were the multinational companies. These multinational
companies went global for markets and labor, spearheaded first by the expansion of the
Dutch and English joint-stock companies and the industrial revolution. As there was a need
for finances and large investments these Companies started making joint ownership through
the issuance of shares of stock. It was in this era that we really saw the birth and maturation
of global economy.
5
Thomas l. Friedman: The World is Flat:
Around year 2000 we entered a whole new era of globalization. While the dynamic force in
globalization 1.0 was the countries globalizing and the dynamic force in globalization
2.0 was the companies globalizing, the dynamic force of globalization 3.0 is the thing
that gives it its unique character is the new found power for individuals to collaborate
and compete globally. 6 Today all of us are on a single platform, and can watch others
performing, hence the world has become flat. And, in the previous two eras it was driven by
Europe and America, but this era has brought an opportunity for the developing countries
like India and china. Hence, giving them greater access to developed countries markets and
2.3 Effects:
Globalization has various features which affects the world in several different ways. Thomas
L. Friedman in his book has examined the impact of the "flattening" of the world, and argues
that globalized trade, outsourcing, supply-chaining, and political forces have changed the
And these changes can be broadly diffferentiated into economical, political, and social
changes, which have their impacts on the architecture of the place, which can be seen
worldwide.
New investment patterns created a diverse flow of foreign direct investment and
6
Thomas l. Friedman: The World is Flat:
The formation of global sourcing multi-national enterprises, led to the searching of
These economic changes have resulted new trend of architecture with new spatial building
categories like B.P.O.s, banks, techno poles. These new buildings have changed the
culture and the lifestyle of the people. These buildings also use the latest technologies, which
New architecture services have been rendered to take care of these social changes of the
society. New activities have brought new trends in society like coffee shops, fast food
restaurants, hotels and many more have added to global image of the city. Their
architecture represents the global image in society as they demand a specific design in their
look due to the technological innovation in the field of commerce. All these new buildings
had created their own universal aesthetic image all over the world.
7
Unpublished Dissertation Draft, Sushant School of Architecture, D-219, Nomita Sawhney..
8
Unpublished Dissertation Draft, Sushant School of Architecture, D-219, Nomita Sawhney..
Most urban buildingshousing, offices, schools, hospitals, museums, theatres, malls etc can
embody indigenous architectural traditions, but they also can be high-profile, non-traditional
architectural symbols contributing to a citys global profile, and nowadays they are built in
such manner. These developments require a certain infrastructure and building techniques
In todays trend of globalization architects can easily examine the architecture which
has been produced at different parts of the globe. And can choose or borrow ideas to
build. Many stylish products and materialsglass, aluminium, stainless steel, copper,
titanium, countless varieties of natural stoneused to clad and finish buildings are readily
available throughout the world. If they are not available locally, they can be ordered and
For developing countries use of the advance technology, new materials in creating new
architecture is one way to show progress in this advanced world. Therefore these
countries have tried to create an architecture (based on technology), which will reflect a
global identity and to show their growth and development. But many architects are just
And these buildings have no or very less relation with the surroundings. This new identity
has affected the regional identity of the place as it is more focusing on its global image and
for that try to create architecture which is unique, innovative and different from its
surrounding.
PART-3
3.1 Technology:
The word technology comes from the Greek technologa tchn, 'craft' and loga, the
Techniques are methods of creating new tools and products of tools, and the capacity for
Charles Darwin suggested the question of survival always depends upon the capability of
And in the Webster dictionary technology is defined as the systematic treatment of the
process. So, the systematic and creative technique to adapt to the changing environment can
To protect himself from the inimical elements of nature and to sustain himself, Man has
always developed and invented technology. Necessity is the mother of inventionAs the
history exhibits, man invented the control on fire, which fulfilled his needs for more sources
of food. This invention was probably the beginning of use of technology by the man to fulfill
his needs. And till now mankind is generating new technologies and using them to fulfill his
9
From website: - en.wikipedia.org/wiki/Globalization.
10
Unpublished Dissertation Draft, university school of Architecture and Planning (GGSIPUL, Puneet Narang.
Technological developments are conceived as the main facilitator and driving force of most
of the globalization processes. With technology, the world has changed drastically. The
invention of the script can be considered as the first technology of communication that
contributed to globalization. With the script man could transmit and store information that
could speed up further technological developments. The use of wind power, horse power and
later steam power helped to go global. Invention of the print machine with moving letters
by Gutenberg was the most important revolutionary technological development, which made
possible even a larger global geography. After that: The emergence of the newspapers, the
invention of telegraph, Telephone, radio, railways, motor vehicles, jet planes, television,
the PC, satellites, fiber-optic cable, and the early version of World Wide Web. All these
put the world to go in new era of globalization. It was in this era that we really saw the birth
and maturation of global economy. And now the new inventions in software and all sorts of
new application in conjunction with the creation of global fiber optic network that has
appear to have helped to create increasingly global markets and other institutions.
Survival in the new global business market calls for improved productivity and increased
competition. Due to the market becoming worldwide, companies in various industries have to
upgrade their products and use technology skillfully in order to face increased competition.11
11
Thomas l. Friedman: The World is Flat:
So these more global institutions also modify emerging technological innovations, along with
the universities, government agencies, and other organizations, to develop further more
technologies.
Hence both the globalization and technology goes hand in hand, by the development of one the
From early times it is visible that to produce any artifact or any form of aesthetics you
required skills, tools and material. In which skill was the skill of the craftsman involved in
the work, tools were the hammer, chiseler, paints etc and the materials were wood, stone,
mud, etc. in todays world the skills are the intellectual of the engineers and the scientists
involved, tool is the technology (hardware and software), and materials are the processed
materials.
A building is an object that defines and encloses space, expresses the socio-economic and
environmental value of its time more than any other art form. In architecture, the main
objective has, most of the time, been to create an enclosed space, which is a volume or zone
conceived for a certain purpose. Moreover, the purpose and the characteristic of a space to be
created is only established when it is physically enclosed. The physical enclosure which
defines a space is the structure and the medium required to build the structure is material.
Every material has its own constraints due to its inherent structural qualities. Technology is
incorporated to define space, exploiting the intrinsic properties of the material. The
final outcome of this phenomenon is the resultant form. And this form has aesthetics and it
expresses a meaning. The meaning of any building form is also expressed by technology,
applied to exploit the properties of material and build a structure to define space.
If the built form reflects the process of the building, then technology is understood to be
expressed.
In other words, the expression of technology can be defined as the technique to develop a
After industrial revolution, a new architecture evolved rapidly under this influence where a
building was designed to express its technological inputs. Nervi believed: The attempt to
reconcile architecture with art will fail, as long as technology remains unrelated to the
Crystal palace represents the first use of the industrial technology in building. 12 This
building marks a major change in architectural history because the proportional discipline
Today with the help of science and technology architecture has attained unlimited potential,
many architects feel that the use of a new technology and material will eventually produce
and graceful beauty. This approach has given birth to many styles of architecture, and among
12
Collin Davies: High-Tech Architecture
PART-4
4.1 HIGH-TECH
Within a construction system, technology has been taken to a combination of two factors:
Materials
Technique
i.e.
Carrying from this equation it follows that both the material and the technique of its use and
which applied to a basic, raw-material also increase the level of technology, hence Hi-Tech.
It also follows that an industrially produced building system implies, by default that it has
been made under a higher-level technological process, and can qualified as HI-TECH
because the very act of processing it imparts a HIGH-TECH aspect inherent to that
material.
All of the High Tech architects agrees at least one thing: they hate the term High Tech as
in the early 1970s Hi- Tech was often used as a term of abuse by architect but as the term
passed into more regular use it lost its negative connotation. High tech in architecture is
much more different from the high tech in industry. And the high tech architects prefer to use
In architecture, the main objective has, most of the time, been to create an enclosed space.
These spaces are to be made best suited for their functional requirement (for which the
building is made) and the systems used (like structural system, environmental conditioning
system, service system, communication system etc) to make these spaces work properly
And the high tech architects try their best to incorporate these systems into a broader theme
in most efficient way. And during this process the expression of the building is an output of
the strategies applied by the architect. The built form in the High-Tech structure reflects the
process of building making and function. So, High tech is an approach to building
making, one that arises in the 1960s and 1970s and continues to develop today.
production. It uses industries other than the building industry as source for both technology
The pioneers of high tech believe in the spirit of the age and it is moral duty of
architecture to express the same. They wish their buildings to be judged by the same criteria
of performance as any other tools of everyday life. So they want them to be functional and
efficient not artistic or symbolic. They believe that there should be a functional justification
for every design decision (honesty in expression). For example Nicholas Grimshaws Ice
Rink in Oxford, this building brings in mind the romantic image of a sailing ship. Where the
expression could be gained by many ways, but in this building it has a justification i.e. the
The high tech architect argues that buildings are no longer need to be built of the
cumbersome and imprecise materials like concrete, mortar, bricks and mud when the same
time can be made out of light precision components of metal, glass or timber fabricated
Mass production:
High Tech architect choose machine both as a source of technology and imagery.
Machines are usually mass-produced, they are either mobile or portable, and are made of
synthetic materials, such as metal,, glass and plastic. These characteristic have became the
least capable of repetition, cannot de portable but can be easily dismantled and moved.
Norman Fosters Sainsbury centre for visual art, Michael hopkins brewery in bury St
Buildings cannot be mass produced, because to reach the same level of the sophistication it
will take a very long time to design only one building. But the mass production of certain
Doors, windows, curtain walls, raised floors and suspended ceiling, flooring materials,
and furniture are being mass produced. The best example for this is the HSBC bank by
Norman Foster. In this building he managed to raise the real quality of sophistication of
building technology.
Floors are suspended from the 2- storey high coat hangers; at HSBC bank, Architect: Norman Foster
architecture, even though not all of the high tech architects expose the structure and service
of their building as a matter of course. The various elements of a high tech building- the
muscular steel structure, the smooth, impervious skin, the deliberately exposed pipes and air
centre Pompidou, Architects: Richard Rogers Lloyds building, Architect: INMOS Factory, Architect:
and Piano Richard Rogers and Parteners Richard Rogers and Parteners
Form of the complete high tech building is often remarkably inexpressive of its intended use.
A high tech architect would say what we are providing is not an enclosure- room or a hall
or a spatial sequence- but a serviced zone. it might be internal or external. The possible uses
Heat, light, power and something to fix partitions to on regular grid. collin davies
Plan Section Plan
Lloyds building, Architect: Richard Rogers and Parteners Centre Pompidou, Architects:
Richard Rogers and Renzo Piano
Most modern office blocks allow a degree of flexibility in the placing and moving of
partitions. But high tech architecture takes flexibility a stage further. It introduces the idea
that not just partitions but also more permanent elements, like walls, roofs and structural
frames should be demountable. External walls are the common subjects for these exercises in
additional flexibility. The elevation, like the plan, becomes an abstract grid that can
window, or a metal louver when the function of space changes, configuration of the external
wall can respond accordingly. And because it is an assemblage of tough dry components, the
change can be made in a matter of minutes with simple tools and no mess. Flexibility is an
It is much less common for structural elements such as frames, floors or roofs to be made
demountable. But the idea is often implied in the form of the building. The centre Pompidou,
All these buildings are open-ended and incomplete, so that floors and other elements of
This device in high tech architecture combines various preoccupation with flexibility,
Parts of the building can be produced anywhere and then can just fixed to the main frame of
the building. The best examples are the Lloyds building and the HSBC bank, in the Lloyds
the pods contain toilets. The equivalent pods at the Hong kong Bank are slightly different,
both in function and expression. As at Lloyd's, they contain the toilets, but they also contain
the localized air handling plant. In the HSBC bank the air handling plants are made
unpluggable. In fact, however, they too are permanently fixed in place, and the stacks of
pods have been clad in a continuous aluminum skin so they do not even look unplug gable.
Prefabricated Modules: Lloyds building Toilets pods being hoisted in place Nakagin Capsule Tower
At Lloyds building
High tech buildings imply a revolutionary, rather then a traditional view of the city. These
building generally consist of carefully wrought, individually crafted and highly engineered
parts that raise the individual industrial components of the structure to an art form.
High tech architecture inverts the nineteenth century historical picturesque ideal (follies in
aristocratic landscaped gardens, for example) by exhibiting a nostalgia not for the past, but
A number of theories have been put forward as to why this style of building have developed
in Britain rather than, say, Germany, America, or Japan. Perhaps it is nostalgia for the great
days when the Empire was serviced and maintained as much by engineers as by
who demanded "that there should be no features about a building which are not necessary for
convenience, construction or propriety" and "that all ornament should consist of the essential
construction of the building. Perhaps it follows from the British professional tradition that
requires architects to concern themselves with, and be responsible for, the technical details as
well as the spaces, forms, and surfaces of their buildings. Or perhaps it is merely a reflection
of that British literal-mindedness that sees architecture not as high-flown art or philosophy,
but first and foremost as technique. Perhaps, perhaps not. They are only theories, yet there is
To see the origin of this style of architecture we have to go back to 1779 and the construction
of the first iron bridge over the River Severn at Coalbrookdale. It is an all-metal
prefabricated structure, completely honest in its use of materials and structural forms, but
designed as much for elegance as for practicality. It can be titled as the first high tech
structure.
Above image: Cast Iron Bridge over river Severn
This may seem like far too remote a source for an architectural style born in the 1960s, but
the bridge is still standing and we should not underestimate the influence of eighteenth- and
Decimus Burton's at Kew Gardens of 1848, the long-span iron, steel and glass roofs over
the great railway termini built throughout the second half of the nineteenth century, Eiffel's
tower and Contamin and Dutert's Galerie des Machines built for the Paris Exhibition of
1889, and of course Paxton's legendary Crystal Palace built for the Great Exhibition of
1851 - structures such as these are enduring influences on today's High Tech architects. They
architectural tradition.
High Tech architecture shares their confidence and optimism and also, to a large extent, their
relatively primitive technology. Throughout the first half of the twentieth century it was to
remain an alternative rather than a mainstream mode of building. Exposed structures can be
traced back to Meis Van Der Rohe with decorative steel Pilaster in Seagrams Building.
The perspective sketches of Sant' Elia's Citta Nuova exhibited in 1914, are among the
earliest depictions of an architecture that glorifies the technology of concrete, steel, and
glass, and which gives dramatic external expression to lift towers, girder bridges, and
elevated walkways. The similarities to the more sculpturesque examples of the High Tech
"We no longer believe in the monumental, the heavy and static, and have enriched our
sensibilities with a taste for lightness, transience and practicality. We must invent and
rebuild ex novo our modern city like an immense and tumultuous shipyard, active, mobile
and everywhere dynamic, and the modern building like a gigantic machine. Lifts must not
longer hide away like solitary worms in the stairwells...but must swarm up the facades like
The Centre Pompidou and the Lloyd's building would be quite at home in the Citta Nuova.
With the Russian Constructivists we come even closer to the precision of High Tech, the
diagonal steel cross-bracing, lifts in glass shafts and even what appears to be a satellite dish
on the roof (in fact it is a searchlight). We can even begin, at this point, to trace direct and
In Western Europe, the influence of Constructivism was felt most strongly in the
Netherlands and is most visible in the work of Mart Stam, who collaborated with El
Lissitsky, the chief propagandist of Constructivism, and Johannes Duiker. Duiker's partner,
Bernard Bijvoet, was to collaborate with Pierre Chareau in the design of the in Paris,
components with a flexible plan and an external wall made entirely of glass lenses. In 1959
Richard Rogers visited the Maison de Verre and he now acknowledges it as the building
the first system of replaceable wall components for lightweight metal houses. Prouv was to
continue to develop his own, peculiarly French, metal and glass architecture right up to
the 1970s. The extent of his influence on British High Tech can be gauged by Norman
Foster's remark when he invited Prouv to visit his office: "We would never have done all
this without you." Meanwhile, Buckminster Fuller was proposing an even more
thoroughgoing application of advanced technology in his Dymaxion House project of 1927,
a hexagonal structure of lightweight metal and plastic suspended from a core of mechanical
services. If anyone deserves the title "father of High Tech" it is Fuller. His comprehensive
and knowledgeable use of materials and technology borrowed from other industries (the
time), his insistence on a global view of building performance (architects, he said, should
know not just how big their buildings were, or how much they cost but also how much they
weighed), and his refusal to have anything to do with the conventions of traditional,
academic architecture - these have all been built into the ideological structure of High Tech.
Dymaxian House
The group called Archigram (Peter Cook, Warren Chalk, David Greene, Denis Crompton,
Ron Herron and Mike Webb) began to publish and exhibit spectacular theoretical projects
that clearly displayed many of the features of the High Tech architecture of the 1970s and
1980s: the indeterminate forms, the mass-produced, expendable, plug-in components, the use
of technologies from the emerging aerospace industry and, above all, the idea that architects
Middleton has remarked that in the 1960s Archigram did for architecture what the
The Smithsons' Hunstanton School, designed in 1949 and sometimes described as "Miesian
brutalist", was one of the very few British postwar buildings to be accorded any respect by
the 1950s avant garde. It had a curiously formal, Palladian plan, but what made it
revolutionary at the time was the way it displayed with complete honesty its materials steel
frame, brick infill, precast concrete floors, exposed electrical conduit and pipework, and a
proprietary steel water tank raised on a freestanding steel frame like a campanile.
James Gowan in 1959 and completed in 1963, is another historical marker in the
patent glazing, it combined constructivism, nineteenth century engineering, and the colours
and textures of red-brick city of Leicester in such an utterly convincing way that it made
5.1 Conclusion:
The contemporary modes of development and urbanization demand an architecture that does not
rely on traditional practices. The present day economic structure provides an opportunity to
transform a local resource into global one and vice-versa. The principles of the High-Tech
architecture as observed in the study promise to create buildings with higher level of efficiency
and performance.Such buildings are built all around the Globe expressing their technical
achievements. But this style cannot be called as Global High-Tech architecture as all of its
leaders Richard Rogers, Norman Foster, Nicholas Grimshaw, Michael Hopkins belong to one
region, share the same educational background which was influenced by the evolution of
architecture in that region. From its history of origin it can be argued that this architecture is the
continuation of British and French tradition of engineering and building materials. These high
tech architects have taken this tradition to a new stage. So it is a Regional- High Tech
Many individuals around the globe are just replicating the image of High-Tech architecture
which is not correct as High Tech architecture itself emphasizes on the use appropriate
technology. However one should understand that even the appropriate technology should also
be sensitive towards the surrounding. These buildings have no or very less relation with the
surroundings as they do not express the development of the architectural tradition of that area.
Similar conclusions can also be drawn from Darwins theory whish describes that- organism
survive, Hence giving rise to different species. Therefore, as British tradition of engineering
gave birth to British high- tech architecture, each region will give birth to its own regional
high-tech architecture.
It does not mean that we have to develop the tradition all from the basic we can have a
different approach as Kenneth Frampton asserts about critical regionalism that While
aiming at fostering local character and identity, critical regionalism constantly remain open
to and can selectively accepts elements and ideas from other sources. And the principles of
So a different approach is needed in which. On the one hand is the taste of high tech
architecture- to explore and rethink the structural principles and define new geometric forms
and structural order, to achieve a new level of sophistication to integrate space, structure,
skin, and the services into all over scheme, and On the other hand is a genuine, and not
By indigenizing the tools of hi-tech architecture to the local conditions, we might be able to
evolve new construction techniques, new materials, new structural orders, new strategies to
integrate structure, space, and services and doing this we might be able to create new spaces
Similar approach has been tried by many architects around the world. The next chapter of
this dissertation will focus in finding out that how does these architects have tried to
incorporate new technologies to traditional building techniques. And will also find out that
till what extent did they indigenized the new technology to the local because the depth of this
Steins characteristically
around two great courts and connected by porticoes at ground-level and rooftop verandahs.
All the main rooms (offices, library and guest rooms) face approximately north- south, the
preferred orientation in the Delhis latitude, except for the dinning-rooms and lounge which
overlook, an exceptional view of the Lodi Gardens. The height of the building has been kept
All the functions are gathered around the courtyards and green, which binds the whole site all
together. The verandah beneath the guest room provides a frame view of the Lodi tombs, the
pool and the shaded green on the rare side of the guest room, provides an informal meeting
place under the shaded green. This shows a true analysis of Indian life as all of its old
construction meet the sky. The concrete frame is filled in with several types of cladding
(local stone, pre-cast concrete panels) and shading devices of various sizes, materials and
relationships.
Shading Devices:
The range of shading devices for the project- trellises, ground level and rooftop pergolas,
jalis, vertical sliding louvers. Depending upon the task at hand, the shading devices at IIC
range from relatively monolithic sunshields, like the pre-cast vaulting for the entry portico
and rooftop pergolas, to an operable lightweight device- the vertical sliding window louvers
in the dining room. The most precisely detailed and co-ordinate of the devices are the design
These strategies helped Stein to achieve a modern synthesis responsive to the Indian context.
East gate - Centre Architect: Mick Pearce
HARARE, ZIMBABVE (1996)
is a shopping centre
complex is actually
by bridges across a
shady, glass-roofed atrium open to the breezes. In this building Mick Pearce has used a
passive cooling strategy applied by the termite mounds in the local area, he
these termites cultivate--while the temperature ranges from 35 - 104 F outside. For
instance, the mounds thermal mass has sufficient heat capacity to buffer the internal
environment from heat gain during the day with cold accumulated over the night;
narrowing shafts rising through the mound channel and accelerate the release of warm
internal air out vents at the mounds top; and openings at the base of the mound allow
cooler, denser air to flow in replacing warmer air as it rises. These principles informed
the design of the East gate Center, which uses about 35% of the energy required for
smaller fans blow to changes of air an hour through the building, taking advantage of
what Pearce calls "the coolth in the slab." For winter days, there are small heaters in the
vents. This is all possible only because Harare is 5,400 feet above sea level, has
cloudless skies, little humidity and wide temperature swings -- days as warm as 88
To keep the harsh highveld sun from heating the interior, no more than 25 percent of the
outside is glass, and all the windows are screened by an unusual form of sunshade: racks of
cement arches that jut out more than a yard. These deep eaves also added to the regional
The Fondation Beyeler consists of three parts: the Berower Park, acquired by the Riehen
authorities in 1976, the 18th-century Berower Villa, which houses the restaurant and offices,
The elongated building covers the whole breadth of the narrow plot of ground situated
between a busy main road and a protected area of farmland. It combines two contrasting
motifs: long, solid walls and a light, apparently floating glass roof. All the external walls are
The building is supported by four 127 metres long parallel load-bearing walls placed at
intervals of about seven metres. The two end faades are made of glass and look out over the
park. On the road side, the museum is completed by a windowless wall that protects the
building and on the inside of which the Art Shop, cloakroom, toilets, etc are located. On the
opposite wall there is a winter garden with a view of the surrounding countryside.
Located between the longitudinal walls, the exhibition rooms dedicated to the permanent
the walls, the ceiling and the light-coloured French oak floor.
controlled louvers, artificial lighting and the roof of brise-soleil are used to control the light
in the galleries.At the building ends the glass roof extends generously beyond the glass walls
and a further row of pillars, over the reflecting pool and the real-life water-lilies outside.
There exists a harmonious balance between the
over them horizontally like a flying carpet. It supports the glass of the transparent roof and
the 900 brise-soleil that protect the interior against direct overhead sunlight.
The internal requirements associated with the Beyeler Collection's characteristics and sizes
have been sensitively reconciled with the site's external constraints. Piano has described his
task in the following words: "A museum should attempt to interpret the quality of the
collection and define its relationship with the outside world. This means taking an active, but
considered tropical and the temperature, heat and humidity in this region are fairly similar
throughout the year. The day and night temperature vary little. Artificial landscape was
created to shelter and insulate the lowest three levels from the morning sun. Parking is
building;
2- a circular spiraling body with landscaped sky courts that allow visual relief for office
workers as well as providing continuity of spaces connecting the land through the building.
tropical overhead sun path. The core functions are located on the hot side, the east.
The vertical planting provides fresh oxygen at all levels and helps the building for cooling. It
is Yeangs vision of the tropical garden city and it uncovers the relationship of buildings,
landscape and climate . . . transforming the impact of high- rise development in the
ecosystem of a city. The spiral landscape helps in the passive cooling and also marks a
connection that integrates the building with the physical context and natural history.
The building is equipped with a Building Automated System which controls energy features
including air conditioning and is utilized to reduce energy consumption in equipment. The
building is sensitive to and in harmony with the local environment, as well as reflects the
The emergent regionalist architecture as noted in the case studies seeks architectural
significance through relating its built form, open spaces, aesthetics, organization and
technical assemble, landscape integration and material to a certain place and time. This can
be said as a vital connection that links technology with the local conditions. The extent of
indigenizing the technology to the local character also varies in all of the four case studies
which gave them a different expression. Now with the help of the advanced technology these
connections can be evolved further to a great extent. Many more new links can be explored
to produce architecture which will demonstrate both the technological developments and
New materials can be developed by the biological and chemical treatment on the
New structural orders and geometric forms can be developed by analyzing the
New construction techniques can be generated from the available local materials.
These connections would be able to create an architecture which has never been
explored.
PART-7
BIBLIOGRAPHY
(Article)
10. The contemporary city, Shaily Gupta, SPA Batch 2004 (unpublished
dissertation)
Websites:
1) www.globalisationguide.org
2) en.wikipedia.org/wiki/Globalization
3) http://www.emarketing.ie/resources/glossary.html
4) Richard rogers and Stirk Harbour official wedsite
5) Renzo piano workshop
6) Norman Foster and Partners official website
7) Ken yeang and T R Hamzah official website