100%(1)100% au considerat acest document util (1 vot)
2K vizualizări11 pagini
The document discusses configuration settings for a BTS including assigning a PID number using BTS ID, WAM, and line ID. It mentions that the default destination IP should be used if no rules are defined. Instructions are given to use a 21 watt transmitter without a license if the BTS AC power goes down. Finally, it notes that checking an override will cause the RNC to directly choose the transmission frequency, while unchecking will allow the RNC to automatically tune the frequency.
The document discusses configuration settings for a BTS including assigning a PID number using BTS ID, WAM, and line ID. It mentions that the default destination IP should be used if no rules are defined. Instructions are given to use a 21 watt transmitter without a license if the BTS AC power goes down. Finally, it notes that checking an override will cause the RNC to directly choose the transmission frequency, while unchecking will allow the RNC to automatically tune the frequency.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca DOC, PDF, TXT sau citiți online pe Scribd
The document discusses configuration settings for a BTS including assigning a PID number using BTS ID, WAM, and line ID. It mentions that the default destination IP should be used if no rules are defined. Instructions are given to use a 21 watt transmitter without a license if the BTS AC power goes down. Finally, it notes that checking an override will cause the RNC to directly choose the transmission frequency, while unchecking will allow the RNC to automatically tune the frequency.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca DOC, PDF, TXT sau citiți online pe Scribd
PID= btsid+wam+lineid = 23+00+1=23001 DEFAULT IS UR DESTINATION IP NO RULES SO SKIP NEXT 21 WATT COMES WITHOUT A LICENSE SO USE THT TO SHUT DOWN THE BTS IF THE AC IS DOWN AFTER RECEIVING THE ALARM
IF U CHECK OVERIDE THAN RNC WILL DIRECTLY CHOOSE THE FREQ MHz, IF U DON’T CHECK THAN RNC WILL AUTOMATICALLY TUNE THE FREQ MHz.