Documente Academic
Documente Profesional
Documente Cultură
2010
REF. NO TCF 0003
1 (2)
Temadur 50
DESCRIPTION
PRODUCT
FEATURES AND
RECOMMENDED
USES
TECHNICAL DATA
Volume solids
56 2 %. (ISO 3233)
Weight solids
70 2 %.
Specific gravity
Base
Hardener
Pot life
4 hours (23 C)
5 parts by volume
1 part by volume
Recommended film
thicknesses and
theoretical coverage
506-series
008 7590
Theoretical coverage
dry
wet
40 m
70 m
14.0 m2/l
60 m
110 m
9.3 m /l
Practical coverage depends on the application method, painting conditions and the shape
and roughness of the surface to be coated.
Drying times
DFT 50 m
+ 5 C
+ 10 C
+ 23 C
+ 35 C
45 min
30 min
15 min
10 min
8h
6h
4h
2 h
No limitations.
Drying and recoating times are related to the film thickness, temperature, the relative
humidity of the air and ventilation.
Finish
Semigloss.
Colours
RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards.
TEMASPEED tinting.
Tikkurila Oyj | P.O. Box 53 | Kuninkaalantie 1 | FI-01301 Vantaa | Tel. +358 (0)9 857 71 | Fax +358 (0)9 8577 6911
VAT FI01970674 | Business Identity Code 0197067-4 | Registered OfficeVantaa | www.tikkurila.com
TIKKURILA OYJ
Temadur 50
APPLICATION DETAILS
Surface preparation
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate
means. Repair any damage to the primer coat. Note the overcoating time of primer.
(ISO 12944-4)
Primer
Finish
Application conditions
All surfaces must be dry. The temperature of the ambient air, surface or paint should
not fall below + 5C during application or drying. Relative humidity should not exceed
80%. The surface temperature of the steel should remain at least 3C above the dew
point.
Mixing components
First stir base and hardener separately. The correct proportions of base and hardener
must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Application
Thinner
Thinner 1048 or Thinner 1067. Thinner 1061 (fast) is also suitable for conventional
spraying.
Cleaning of equipment
VOC
Containers are provided with safety labels, which should be observed. Further
information about hazardous influences and protection are detailed in individual health
and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oyj.
mko211209/ttp220210/506-s., 008 7590
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data
sheet. When necessary verify the validity of the product data sheet. The quality of the product is ensured by our operational system, based on
the requirements of the standards ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using
the product against our instructions or for inappropriate purposes.