Documente Academic
Documente Profesional
Documente Cultură
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26771900
Fax: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2010 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of
this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION
or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject
matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,
the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
201007-15
First edition
Contents
Figures ..............................................................9
II
Intended
Audience
Prerequisite Skill
and Knowledge
What Is in This
Manual
Conventions
Technical managers
Maintenance engineers
To use this document effectively, users should have a general understanding of SoftSwitch system.
This manual contains the following chapter:
Chapter
Summary
Chapter
1,
PC
Server Telnet Configurations
Meaning
Italics
Quotes
Links on screens.
Bold
CAPS
II
Typeface
Meaning
Click
Doubleclick
Right-click
Declaration of RoHS
Compliance
To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that ZXSS10 SS1b manufactured by ZTE CORPORATION
are in compliance with the Directive 2002/95/EC of the European
Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
II
Chapter
PC Server Telnet
Configurations
Table of Contents
Configuring the background Interface....................................
Configuring the Foreground Interface ....................................
Configuring clit.out .............................................................
Testing Telnet.....................................................................
1
2
5
6
Context
Steps
6000/tcp
6000/udp
# Telnet 6000
# Telnet 6000
23/tcp
#
23/udp
# Telnet
done
done
4. Test whether the 6000 interface can be used or not in the SUSE
system of PC Server.
telnet 127.0.0.1 6000
END OF STEPS
Context
Steps
You have the rights to configure the port distribution and the
port visit list.
This topic describes how to configure the Telnet 6000 interface (set
its interface module to be 512) on the network management interface in order to Telnet to the background by using the foreground
IP address and 6000 interface.
1. Add a 6000 interface in Port Distribution.
i.
In the Data Configure interface, select Global > IT Configuration > Port Distribution. The Port Distribution
interface appears, as shown in Figure 1.
FIGURE 1 PORT DISTRIBUTION
In the Data Configure interface, select Global > IT Configuration > Port Visit Control List Configuration. The
Port Visit Control List Configuration appears, as shown
in Figure 4.
iii. Configure the visit list of 6000 interface in the Add Port
Visit Control List Configuration interface. For protocols,
select 2-TCP, as shown in Figure 6.
FIGURE 6 CONFIGURING
THE
VISIT LIST
OF
6000 INTERFACE
Configuring clit.out
Prerequisites
Context
Steps
1. Copy all the files in the directory /DBServer/sun_oracle8/clit/ in the asc mode to a temporary directory folder
of the background server.
2. Assign executable rights to tel.sh in this directory:
chmod 755 tel.sh
3. Execute tel.sh in the directory and set a user name and a password (Here we assume that the directory is named as /zhao
and both the user name and the password are telnet):
ssdatabase:/zhao # ./tel.sh
Welcome to install telnet program for CLIS of SS .
Copyright : 2001 - 2002 ZTE Corp .
installing ...
mkdir: cannot create directory `clit': File exists
mkdir: cannot create directory `sshelp_ch': File exists
mkdir: cannot create directory `sshelp_en': File exists
mkdir: cannot create directory `txt': File exists
mkdir: cannot create directory `txt': File exists
groupdel: GID `45678' is primary group of `telnet'.
groupdel: Cannot remove user's primary group.
groupadd: GID 45678 is not unique.
no crontab for telnet
Please input the password of user telnet >>>
Changing password for telnet.
New Password:
Enter telnet
Bad password: too simple
Reenter New Password:
Enter telnet
Password changed.
./tel.sh: line 48: help: no help topics match folder'.
Try help help' or man -k folder' or info folder'.
Installation is over .
Note:
LANG=1 means Chinese; LANG=0 means English.
6. Execute 2496 in the command line of the network management interface to open the executable functions of clit.out:
SS:>2496 2496,CLI_TermAgent is open
END OF STEPS
Testing Telnet
Prerequisites
Context
This topic describes how to test the Telnet functions and execute
commands through Telnet.
Steps
Note:
If the operator fails to Telnet to the destination, check the configurations.
2. In the prompt, use MML to test. Operators can seek help by
executing HELP. Remember, this HELP should be in uppercase:
MyNE1:>HELP 5004
Code
: 5004
Shortcut
: SHOW_REGISTER_MG
Level
: 3
Function
:
Show the information of the MG registered in Softswitch!
The
no.
1
2
3
input params :
type
name
INT\WORD MODULE
INT\DWORD S_NODEID
INT\DWORD L_NODEID
notes
MODULE
SMALL NODEID
LARGE NODEID
range
default
0-1024
0-4294967295 0
0-4294967295 4294967295
opt.
No
No
No
INT\WORD
ZONE
ZONE ID
0-65535
65535
No
Example :
5004:1=2;
Show the information of the MG Processed on module 2 in
Softswitch!
Note :
Module inputted should be right!
Two parameters: S_NODEID, L_NODEID were added to this version
comparing to the version 1.0. The two parameters have default
value: 0 and 4294967295. If want to look up the information
of all the registered MG, please select the default value of
the parameter 2, 3, 4.
relative command :
5000:SHOW_H248_STATIS(Show H248 Statis)
5002:RESET_MG(RESET MG)
5003:AUDIT_TGTID(AUDIT THE TERMINATIONID)
END OF STEPS
Figures