Documente Academic
Documente Profesional
Documente Cultură
Products Available
Chemical Composition
in forms :
MULTIMET N155, UNS R30155, AISI 661 Plates
MULTIMET N155, UNS R30155, AISI 661 Pipes
MULTIMET N155, UNS R30155, AISI 661 Round Bar
MULTIMET N155, UNS R30155, AISI 661 Tube
MULTIMET N155, UNS R30155, AISI 661 Flanges
MULTIMET N155, UNS R30155, AISI 661 Wire
MULTIMET N155, UNS R30155, AISI 661 Fittings
Carbon
Manganese
Silicon
Phosphorus
Sulfur
Chromium
Nickel
Cobalt
Molybdenum
Tungsten
Niobium
Nitrogen
Iron
MULTIMET
N155
0.08-0.16
1.00-2.00
1.00max
0.040max
0.030max
20.0-22.50
19.0-21.0
18.50-21.0
2.50-3.50
0.10-0.20
0.75-1.25
0.10-0.20
Bal
UNS
WNR
AISI 661
R30155
2.4964
0.08-0.16
0.08-0.16 0.08-0.16
1.00-2.00
1.00-2.00 1.00-2.00
1.00max
1.00max
1.00max
0.040max 0.040max 0.040max
0.030max 0.030max 0.030max
20.0-22.50 20.0-22.50 20.0-22.50
19.0-21.0
19.0-21.0 19.0-21.0
18.50-21.0 18.50-21.0 18.50-21.0
2.50-3.50
2.50-3.50 2.50-3.50
0.10-0.20
0.10-0.20 0.10-0.20
0.75-1.25
0.75-1.25 0.75-1.25
0.10-0.20
0.10-0.20 0.10-0.20
Bal
Bal
Bal
ALLOY
155
0.08-0.16
1.00-2.00
1.00max
0.040max
0.030max
20.0-22.50
19.0-21.0
18.50-21.0
2.50-3.50
0.10-0.20
0.75-1.25
0.10-0.20
Bal
Forming
As Super alloy 155 has good ductility, it can be easily formed using conventional methods.
It has the tendency to work harden, hence may need a solution heat treatment to gain back the ductility during cold forming.
Welding
Super alloy 155 is easily weldable by resistance, metal inert gas welding (MIG), and tungsten inert gas (TIG) methods.
It is not suitable to use submerged-arc welding for high temperature alloys as the high heat input during that process can cause cracking in the weld area.
Pre-or post-heating is not required for super alloy 155.
Heat Treatment
Super alloy 155 can be solution heat treated at 1177C (2150F) and then water quenched or quickly air cooled.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
www.aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
Forging
Hot forging of super alloy 155 should be performed by heating the billet to 1177C (2150F) to allow through heating.
It should be ensured that forging is stopped before the temperature drops below 927C (1700F).
Re-heating can be performed in case additional forging is required.
Cold Working
Super alloy 155 can be cold worked and drawn easily.
As work hardening occurs, it is suitable to perform solution heat treatment before completing all cold working.
Applications
Super alloy 155 can be applied in the following:
Exhaust manifolds
Industrial furnace structural parts and fittings
High temperature bolts and gas turbine combustion chambers
Turbine blades.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
www.aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube